Icaciem2017077 by ASDF Administartor

International Conference on Advances & Challenges in Interdisciplinary Engineering and Management

International Conference on Advances & Challenges in Interdisciplinary Engineering and Management 2017 [ICACIEM 2017]

ISBN Website Received Article ID

978-81-933235-1-9 icaciem.org 10 – January – 2017 ICACIEM077

VOL eMail Accepted eAID

01 icaciem@asdf.res.in 28 - January – 2017 ICACIEM.2017.077

Predictive Control for Green House Irrigation Process 1,2,3

S Bhoopathy1, S Aravinthkumar2, P Vivek3 Final Year Students , Department of EEE, Vidyaa Vikas College of Engineering and Technology, Tiruchengode, India

Abstract: It can be the predictive control system for the greenhouse irrigation process. The important objective of control system is to maintain the desired humidity level, keeping the water usage as low as possible. The event-based control scheme uses a crop transpiration model and a water content virtual sensor to trigger the irrigation system events. In that scheme, the event-based controller determines the water level required to compensate for the irrigation system disturbances. Simulation experiments are performed to analyse the behaviour of the designed system and to study the water supply dynamics to the substrate and subsequent drainage and evaporation. The resulting control system is to adapt the actuation rate to the state of the plant providing the water consumption in efficient way. The obtained results shows that the application of proposed event-based approach for the greenhouse irrigation system allows us to improve the control performance and to reduce the water usage being an important issue in intensive agriculture. The improved control performance is obtained due to event-based approach and the inclusion of information about the plant dynamic response for water supply and transpiration effect.

ISBN Website Received Article ID

978-81-933235-1-9 icaciem.org 10 – January – 2017 ICACIEM078

VOL eMail Accepted eAID

01 icaciem@asdf.res.in 28 - January – 2017 ICACIEM.2017.078

Performance Improvement of Head Protective Cap with Acquainted Spring 1,2,3,4,5

S Shyamsundar1, K Sridhar2, C Sundaram3, S Vijay4, R Anand5 UG Scholars, Department of Mechanical Engineering, Vidyaa Vikas College of Engineering and Technology, Tiruchengode, India

Abstract: Cap outline and examination is critical and in addition a fundamental viewpoint if there should arise an occurrence of industry and anyplace. Plan of protective cap assumes a crucial part for its execution and security perspective. Head protector examination additionally to be another essential model in wellbeing perspective. Because of the present prerequisite and security viewpoint distinctive sorts of cap outlines are accessible with various material rules. In this venture non direct examination has been made in wellbeing protective cap plan. In this viewpoint a spring is acquainted with retain the sudden effect stack which is following up on the protective cap. Non straight examination is acquainted with demonstrate the distinctive impacts of sudden load following up on the head protector. By utilizing this outline of head protector the substantial weight fabrication issues and fluctuates perils can be maintained a strategic distance from. by fluctuating this head protector undesirable mishaps can be maintained a strategic distance from .the focal points in this cap is generally basic and plan less extensive as been accessible minimal sizes contrast with other cap this caps are more solid and monetarily &free taking care of procedure of the cap. In this venture we have considered two sorts of insurance premise of the end client. Initial one is Head insurance premise: Attractive outline and phenomenal creation .The protective caps go well past from formal testing in and are the alright with its low back moderately low profile. It was oblige expansion frill. Second one is Face assurance premise: Practical helpful answer for face and listening to generation were no caps to be required. The arrangement of the plan can be adjusted to be required; boosting security and satisfaction solace of these outlines are planned into solidworks2012 variant. This paper is prepared exclusively for International Conference on Advances & Challenges in Interdisciplinary Engineering and Management 2017 [ICACIEM 2017] which is published by ASDF International, Registered in London, United Kingdom under the directions of the Editor-in-Chief Dr K Samidurai and Editors Dr. Daniel James, Dr. Kokula Krishna Hari Kunasekaran and Dr. Saikishore Elangovan. Permission to make digital or hard copies of part or all of this work for personal or classroom use is granted without fee provided that copies are not made or distributed for profit or commercial advantage, and that copies bear this notice and the full citation on the first page. Copyrights for third-party components of this work must be honoured. For all other uses, contact the owner/author(s). Copyright Holder can be reached at copy@asdf.international for distribution.