International Conference on Intelligent Computing and Systems
57
International Conference on Intelligent Computing and Systems 2017 [ICICS 2017]
ISBN Website Received Article ID
978-81-933235-5-7 icics.asia 10 – January – 2017 ICICS113
VOL eMail Accepted eAID
01 icics@asdf.res.in 28 - January – 2017 ICICS.2017.113
Performance of Dissimilar Welds with the Effect of Activated TIG Flux between Mild Steel and Stainless Steel 1
Udhayakummar A S1, Karthick K2 NSN College of Engineering and Technology, India 2 KGISL Institute of Technology, India
Abstract: The purpose of the present work is to investigate the effects of specific fluxes used in the tungsten inert gas (TIG) process on mechanical properties and microstructures when welding 6 mm thick dissimilar metal plates between JIS G3131mild steel and SUS 316L stainless steel .The results shows that the residual slag will be formed when TIG welds produced with oxide flux. The joint penetration and weld depth-to-width ratio can be increased by TIG welding with SiO2 powder. Furthermore, the defects susceptibility of weld can be reduced.
ISBN Website Received Article ID
978-81-933235-5-7 icics.asia 10 – January – 2017 ICICS114
VOL eMail Accepted eAID
01 icics@asdf.res.in 25 - January – 2017 ICICS.2017.114
Characterization of Metal Matrix Composites Reinforced with Fly Ash Raguraman B1, Vigneshwaran M2, Jeganathan M3, Ramachandran K4 1,2,3,4 NSN College of Engineering and Technology, India Abstract: Magnesium matrix composites found various applications in automobile and aerospace industry due to their low density, good mechanical and physical properties. The improvement of this property were attained by addition of reinforcing elements into the metal matrix. In this work the magnesium matrix composites reinforced with various weight percentage of silicon carbide by powder metallurgy process. The Fly ash is used as a reinforcement material in this matrix composite which will improve the homogenous distribution within the matrix. The composite is developed by adding silicon carbide and Fly ash in a correct mass ratio and the composite is prepared by Powder metallurgy process. Mechanical test such as hardness test, microstructure test are conducted. This hybrid metal matrix possesses a good homogenous distribution which improves the material suitable for various applications in automobile and aerospace industries.
This paper is prepared exclusively for International Conference on Intelligent Computing and Systems 2017 [ICICS 2017] which is published by ASDF International, Registered in London, United Kingdom under the directions of the Editor-in-Chief Dr M Sivaraja and Editors Dr. Daniel James, Dr. Kokula Krishna Hari Kunasekaran and Dr. Saikishore Elangovan. Permission to make digital or hard copies of part or all of this work for personal or classroom use is granted without fee provided that copies are not made or distributed for profit or commercial advantage, and that copies bear this notice and the full citation on the first page. Copyrights for third-party components of this work must be honoured. For all other uses, contact the owner/author(s). Copyright Holder can be reached at copy@asdf.international for distribution.
2017 © Reserved by Association of Scientists, Developers and Faculties [www.ASDF.international]
`