2013 Ecodesign Pump Groups The EuP Directive, passed by the European Parliament and the Council of the European Union on July 6th 2005, establishes a framework of rules and criteria for setting requirements on the ecodesign of energy using products (EuPs). The directive’s goal is to reduce the environmental impact of energy using products and support sustainable development in a variety of ways and across a number of different product categories — such as standalone circulator pumps for domestic and commercial buildings. In 2013, the EuP Directive will change the stand alone circulator market in Europe permanently and installers who don’t already choose energy efficient circulators will no longer have a choice. The ecodesign for glandless stand alone circulators will be part of the Declaration of Conformity (CE) and without a CE mark products may not be sold in the EU. By 2015, all circulators sold in the EU will have to meet or exceed even more stringent energy-efficiency requirements.
UPONOR PUSH 12 TH
UPONOR PUMP GROUP VPG-10
UPONOR COMPACT CONTROL V5 HTG PACKS
UPONOR PUMP GROUP PPG-20
UPONOR PUMP GROUP PPG-30 SPARE PARTS & PUMPS
john.ashford@uponor.com
UPONOR PUSH 12 TH PRODUCT CODE 1059834
Power consumption was 25 watts, now only 8 watts.
Features Compact water and room temperature control pump unit Ideal for smaller underfloor heating areas served by one loop only 2m long capillary sensor for remote room temperature control 12 to 28째C room temperature regulation Left or right hand installation mounting bracket 230V mains power 55째C maximum secondary water temperature 2 x 15mm copper primary connections Maximum 3kW output Optional wired room thermostat control using actuator 1022244, shown below
john.ashford@uponor.com
1059842 - UPONOR COMPACT CONTROL PACK V5 Features Fixed water temperature control pump unit 6m ‘A’ rated pump Complete with fill and vent points High limit water temperature thermostat ¾” Primary isolation and regulation valves Ideal for direct coupling to Uponor TM manifolds for multi loop systems 20 to 65°C secondary water temperature regulation Left and right hand connection possible 24V and 230V manifold loop actuators available Maximum 15kW output
1059843 to 1059849 - UPONOR COMPACT CONTROL V5 HTG PACKS Features Pre-assembled pump unit with 2 to 8 port TM manifolds Fixed water temperature control pump unit Acoustic wall mounting brackets 6m ‘A’ rated pump Complete with fill and vent points High limit water temperature thermostat ¾” Primary isolation and regulation valves 20 to 65°C secondary water temperature regulation Left and right hand connection possible Maximum 15kW output
john.ashford@uponor.com
1061091 - UPONOR PUMPGROUP VPG-10 WITH ACTUATOR
Features Pre-assembled fixed water temperature control pump unit 6m ‘A’ rated pump TMV with 3.5 kvs and zone actuator with end switch 1” Primary isolation ball valves Ideal for direct coupling to a single manifold for multi loop systems 35 to 60°C secondary water temperature regulation Supplied for left hand installation, right hand installation possible Maximum 15kW output
Maximum output 15kW or 150m² at 100w/m²
john.ashford@uponor.com
1059839 UPONOR PUMP GROUP PPG-20
Features Pre-assembled variable water temperature control pump unit 6m ‘A’ rated pump 3 port mixing valve with 6.3 kvs 1” Primary isolation ball valves Secondary water temperature immersion pocket Ideal for direct coupling to a single manifold for multi loop systems Water temperature control via valve actuator and Uponor controller purchased separately Supplied for left hand installation, right hand installation possible Maximum 20kW output 24V and 230V mixing valve actuators available Excenter fittings included for direct manifold coupling, 1059841
Maximum output 20kW or 200m² at 100w/m²
john.ashford@uponor.com
1059840 - UPONOR PUMP GROUP PPG-30
Features Pre-assembled variable water temperature control pump unit Heating and cooling water temperature control system Pre-wired mixing valve actuator and weather compensated controller included Outdoor air sensor provided for site installation 8m ‘A’ rated pump 3 port mixing valve with 8 kvs 1” Primary isolation ball valves 1½” Secondary connections Secondary water temperature immersion pocket Ideal for remote coupling to multiple manifold in a central location Supplied for left hand installation, right hand installation possible Maximum 30kW output Excenter fittings available for direct manifold coupling
Maximum output 30kW or 300m² at 100w/m²
john.ashford@uponor.com
1002350 ( Spare actuator for VPG – 10 )
1022244 ( Push 12 actuator )
PUSH 12 Spare Pump - SPI 1059850
VPG 10 Spare Pump – SPI 1059853 1½" BSP Connection 6m `A` rated pump Maximum Output 15Kw or 150²m @ 100w/m²
1059841 Uponor Exceter Fitting G1 ½ x G1 for Pump Groups
CCP V5 Spare Pump – SPI 1059854 1" BSP Connection 6m `A` rated pump Maximum Output 15Kw or 150²m @ 100w/m²
PPG 30 Spare Pump – SPI 1059855 1½" BSP Connection 8m `A` rated pump Maximum Output 30Kw or 300²m @ 100w/m²
PPG 20 Spare Pump – SPI 1059856 1½" BSP Connection 6m `A` rated pump Maximum Output 20Kw or 200²m @ 100w/m²
john.ashford@uponor.com
“Compact Control Pack V5” “A” rated energy efficient Wilo 6m pump Maximum output 15kW or 150m² at 100w/m² Left and Right hand connection now possible! Product Code 1059842
Maximum output 15kW or 150m² at 100w/m²
john.ashford@uponor.com
“Compact Control Packs” “A” rated energy efficient Wilo 6m pump Maximum output 15kW or 150m² at 100w/m² Left and Right hand connection now possible!
UPONOR CONTROL PACKS HTG Maximum output 15kW or 150m² at 100w/m²
1059843 UPONOR CONTROL PACK HTG V5 2-PORT 1059844 UPONOR CONTROL PACK HTG V5 3-PORT 1059845 UPONOR CONTROL PACK HTG V5 4-PORT 1059846 UPONOR CONTROL PACK HTG V5 5-PORT 1059847 UPONOR CONTROL PACK HTG V5 6-PORT 1059848 UPONOR CONTROL PACK HTG V5 7-PORT 1059849 UPONOR CONTROL PACK HTG V5 8-PORT
Uponor Products are Available From your Local Plumbing & Heating Trade Outlets
john.ashford@uponor.com