Uponor Sep 2012 Price Guide by John Ashford

Building a Sustainable Future Together Price Guide - September 2012

Uponor: more than products. professions, third-party manufacturers and users alike. Indeed our slogan â&#x20AC;&#x2DC;no sales without supportâ&#x20AC;&#x2122; shows our dedication to always inaugurate support before a project begins. On a practical We offer real solutions for level we appreciate our both underfloor and radiator products are only as good as heating systems, including the technician who installs intelligent controls. We are them. This is why in 2004 we at the forefront of heating opened our own dedicated innovation, providing a training academy which allows complete comfort experience our customers to learn about to all our users. the theoretical aspects of Our facility at Lutterworth has underfloor heating; putting this knowledge into practice in seen rapid expansion in the last two years, and now houses our training suite, giving the the UKâ&#x20AC;&#x2DC;s largest, professionally best results to the end user. qualified, technical team in the Invisible Comfort: heating solutions industry. Indoor Climate. We offer a broad variety of Our level of expertise is radiant heating and cooling regularly called upon as solutions, providing maximum a reference point by the Uponor Limited provides plumbing and heating systems for all building types, from one bedroom flats to large public buildings.

comfort for the user, high energy efficiency and best possibilities for taking advantage of environmentally sound renewable energies. Reliability and premium quality: Plumbing Solutions. We offer plumbing systems that are corrosion-resistant, hygienic and flexible, providing the construction industry with fast and efficient installation technologies and the end user with long lasting, healthy and trouble free solutions. Our pre-insulated piping systems offer an efficient performance solutions for local energy and water distribution.

Contents Uponor Overview ...................................................................................2

Flexible Plumbing & Radiator Heating Multi-Layer Composite Pipe (MLCP)...........................................5 RTM Fitting...................................................................................6 Modular System.........................................................................11 MLCP Tools..................................................................................17 Cross Linked Polyethylene (PEX)...............................................19 PEX Tools....................................................................................24

Pre-Insulated Pipe.............................................................................25

Underfloor Heating Uponor One Pack Range..............................................................32 Uponor Self Attaching System....................................................36 Screed Floor Systems...................................................................38 Timber Floor Systems...................................................................40 Floating Floor Systems................................................................42 Floating Floor Systems - System 12..........................................44 PEX 20 Systems............................................................................45 Underfloor Heating Controls......................................................48

Energy Systems (Collector Pipe for GSHPs)...................................54

Tools and Accessories........................................................................56

Uponor Training ................................................................................59

Uponor - Conditions of Sale . ...............................................................67

Uponor MlCP Systems • Fully pressed system for all sizes • Colour coded collars, sizes 16-50mm • Modular fittings from 63mm upwards allow for on-site flexibility • WRAS approved products • Service life in excess of 50 years under normal operating conditions

introducing:

Technology

See page 6. 4

Flexible Plumbing & Radiator Heating Uponor MLCP Plumbing Pipes Order Code

Description

Pack Qty

Price per/m (£)

MLCP white, supplied in straight lengths

1013436 1013441 1013443 1013445

75m 51m 30m 18m

2.18 3.60 5.34 6.69

1013432 1013438 1013442 1013444 1013446 1013449 1013451 1013453 1013455 1013457

125m 85m 50m 30m 20m 20m 15m 5m 5m 5m

2.18 3.60 5.34 6.69 10.99 16.40 26.51 41.50 61.36 88.28

100% diffusion-resistant multi-layer composite (MLCP) pipe. Five-layer (PE-RT – adhesive agent – continuously safety welded aluminium – adhesive agent – PE-RT), for general plumbing and radiator-connection applications, and also for distribution mains and risers. Manufactured to the strictest European standards and fully WRAS approved.

1013575 1013463 1013377 1013378 1013559 1013371 1013380 1013388 1013392 1013398 1013400 1013401

Price per/m (£)

Made of high-density polyethylene. Available in red, blue or black. Supplied in coils. Details and prices of a wide range of other sizes of conduit are available on request. First number shown in description refers to I.D. of the protective tube. The second is the size of MLCP suitable. N.B. Does not include MLCP.

16 Black (12mm) 20 Red (16mm) 20 Blue (16mm) 20 Black (16mm) 23 Red (20mm) 23 Blue (20mm) 23 Black (20mm) 29 Red (25mm) 29 Blue (25mm) 29 Black (25mm) 36 Black (32mm)

100m 50m 75m 100m 120m 200m 500m 100m 200m 50m 100m 50m

1.52 1.85 1.85 1.85 1.85 1.85 1.85 2.89 2.89 4.58 4.58 6.58

1012857 1012858 1012859 1012860 1012862 1012863 1012864 1012866 1012867 1012869 1012872

50m 50m 50m 50m 50m 50m 50m 50m 50m 50m 25m

0.78 0.86 0.86 0.86 1.09 1.09 1.09 1.59 1.59 1.59 1.86

MLCP Tubolit S 9mm MLCP encased in 9mm insulation. Supplied in coils. Roundextruded pipe insulation made of polyethylene foam with closed-cell material structure. WLG 040. -Fire-resistance class B2, conforming to DIN 4102. -Insulation thickness 9mm, for cold-water conduits conforming to DIN 1988 (part2), and heating system conduits conforming to EnEV. -Additional continuous impact sound insulation required.

MLCP white, supplied in coils

12x1.6mm 16x2mm 16x2mm 16x2mm 16x2mm 16x2mm 16x2mm 20x2.25mm 20x2.25mm 25x2.5mm 25x2.5mm 32x3mm

Pack Qty

MLCP conduit

100% diffusion-resistant multi-layer composite (MLCP) pipe, five-layer (PE-RT – adhesive agent – continuously safety welded aluminium – adhesive agent – PE-RT), for general plumbing and radiator-connection applications, and also for distribution mains and risers. Manufactured to the strictest European standards and fully WRAS approved.

3m lengths 16x2mm 20x2.25mm 25x2.5mm 32x3mm 5m lengths 16x2mm 20x2.25mm 25x2.5mm 32x3mm 40x4mm 50x4.5mm 63x6mm 75x7.5mm 90x8.5mm 110x10mm

Order Code

Description

16x2mm 20x2.25mm 25x2.5mm

1013625 1013626 1013627

75m 75m 50m

3.34 4.44 5.82

MLCP Tubolit S-50 13mm MLCP encased in 13mm insulation. Supplied in coils. Concentrically-extruded pipe insulation made of polyethylene foam with closed-cell material structure. - Fire-resistance class B2, conforming to DIN 4102 - Insulation thickness 13mm, for cold-water conduits conforming to DIN 1988 (part 2), and heating system conduits conforming to 50% insulation requirement. - Additional continuous impact sound insulation required.

16x2mm 20x2.25mm 25x2.5mm

1013628 1013629 1013630

75m 75m 50m

3.53 4.91 6.32

MLCP-in-Pipe MLCP in corrugated protective tube made of highdensity polyethylene. Supplied in coils. Available in red and blue.

16x2mm - Blue 20x2.25mm - Blue 16x2mm - Red 20x2.25mm - Red

1013675 1013677 1013679 1013681

75m 75m 75m 75m

3.44 5.16 3.44 5.16

introducing new Uponor Ring Tension Memory Fittings: Uponor now introduces the new RTMTM Technology: Ring Tension Memory with the ToolInside concept, ideal for refurbishment and new buildings, allowing safe, quick and professional joints, thanks to the Joint Indicator and no tool dependence. RTMTM Technology works perfectly with Uponor´s MLCP pipes.

It is easy to install due to its revolutionary RTMTM Technology, a technology that has allowed Uponor to incorporate the Tool-Inside: The Ring with Tension Memory. This revolutionary RTMTM Technology creates constant pressure ensuring perfect and long lasting joints. Ring Tension Memory Technology Tecnología de Anillo con Memoria de Tensión

Colour coded diameters

RTM Fittings Description

Order Code

Pack Qty

Price each (£)

RTM Coupling

16mm (PPSU) 20mm (PPSU) 25mm (PPSU) 32mm (Brass)

Order Code

Pack Qty

1048547 1048548 1048549 1048575

10 10 5 5

3.60 4.86 8.17 21.14

1048561 1048590 1048562 1048591 1048592 1048563 1048593 1048594 1048595

10 10 10 10 10 5 5 5 5

6.34 7.43 7.77 9.37 10.00 10.86 13.70 14.51 21.71

Price each (£)

RTM Elbow

1048542 1048543 1048544 1048572

10 10 5 5

3.54 4.46 6.86 17.26

RTM Reducer

20x16mm (PPSU) 25x20mm (PPSU) 25x16mm (Brass) 32x25mm (Brass)

Description

16mm (PPSU) 20mm (PPSU) 25mm (PPSU) 32mm (Brass) RTM Female Elbow

1048545 1048546 1048573 1048574

10 5 5 5

4.17 6.17 8.00 14.11

16x½” FT (PPSU) 16x½” FT (Brass) 20x½” FT (PPSU) 20x½” FT (Brass) 20x¾” FT (Brass) 25x¾” FT (PPSU) 25x¾” FT (Brass) 25x1” FT (Brass) 32x1” FT (Brass)

Flexible Plumbing & Radiator Heating RTM Fittings Description

Order Code

Pack Qty

Price each (£)

RTM Male Elbow (Brass)

16x½” MT 20x½” MT 20x¾” MT 25x¾” MT

Description

Order Code

Pack Qty

1057364 1057365

10 10

10.86 14.29

1048539 1048566 1048540 1048567 1048568 1048541 1048569 1048570 1048571

10 10 10 10 10 5 5 5 5

4.46 6.74 5.37 7.99 8.86 7.77 11.42 13.26 16.00

1048603 1057377 1057378

10 5 5

5.37 8.50 15.50

Price each (£)

RTM Flexible Tap Connector (300mm)

1048599 1048600 1048601 1048602

10 10 10 5

7.77 9.13 11.31 13.71

16x½” FT 20x¾” FT RTM Male Adapter

RTM Wall Plate Elbow

16x½” FT (PPSU) 20x½” FT (PPSU) 20x¾” FT (Brass)

1048564 1048565 1048598

10 5 5

7.43 8.29 13.26

RTM Equal Tee

16x½” MT (PPSU) 16x½” MT (Brass) 20x½” MT (PPSU) 20x½” MT (Brass) 20x¾” MT (Brass) 25x¾” MT (PPSU) 25x¾” MT (Brass) 25x1” MT (Brass) 32x1” MT (Brass) RTM Copper Adaptor

16mm (PPSU) 20mm (PPSU) 25mm (PPSU) 32mm (Brass)

1048550 1048551 1048552 1048576

10 10 5 5

4.55 7.14 11.71 30.97

RTM Reduced Tee

16/15mm 25/22 32/28 RTM Radiator Connection Elbow

20x16x20 (PPSU) 20x16x16 (PPSU) 20x20x16 (PPSU) 25x16x25 (Brass) 25x20x20 (PPSU) 25x20x25 (PPSU) 32x25x25 (Brass) 32x25x32 (Brass) 32x20x32 (Brass)

1048553 1048554 1048555 1048577 1048557 1048556 1048578 1048579 1048580

10 10 10 5 5 5 5 5 5

6.86 6.86 6.86 15.83 10.29 10.86 24.47 27.90 26.69

Radiator Connection elbow with 15mm plated copper spigot.

16/200mm

16.00

1057379

RTM Swivel Nut Union

RTM Female Tee (Brass)

16x½” FTx16mm 20x½” FTx20mm 20x¾” FTx20mm

1048587 1048588 1048589

10 10 10

12.00 14.00 15.71

16x½” FT 20x¾” FT

1057375 1057376

10 10

9.50 11.50

1048606 1048607

1 1

1.71 2.86

RTM Calibrator Tool

RTM Female Adapter 16/20/25mm 32mm 16x½ FT (PPSU) 16x½” FT (Brass) 20x½” FT (PPSU) 20x½” FT (Brass) 20x¾” FT (Brass) 25x½” FT (PPSU) 25x¾” FT (Brass) 25x1” FT (Brass) 32x1” FT (Brass)

1048558 1048581 1048559 1048582 1048583 1048560 1048584 1048585 1048586

10 10 10 10 10 5 5 5 5

6.29 7.71 7.20 8.69 9.71 9.03 12.00 13.71 19.43 7

Flexible Plumbing & Radiator Heating Uponor MLCP Plastic Press Fittings Description Order Code Pack Qty

Price each (£)

Composite coupling/reducer

Description Order Code Pack Qty

Composite tee

Made of PPSU, with press sleeve.

16x16mm 20x16mm 20x20mm 25x16mm 25x20mm 25x25mm 32x25mm 32x32mm 40x40mm 50x50mm 40x25mm 40x32mm 50x32mm 50x40mm

1022736 1022740 1022737 1022741 1022742 1022738 1022743 1022739 1046401 1046402 1046403 1046404 1046405 1046406

10 10 10 5 5 5 5 5 5 3 5 5 3 3

Made of PPSU, with press sleeve.

2.60 3.17 3.49 4.94 5.08 5.35 8.40 8.75 14.03 17.95 12.91 14.58 17.40 18.52

Made of PPSU, with press sleeve.

1022714 1022715 1022716 1022717 1046386 1046387

10 10 5 5 5 3

3.26 4.08 5.77 8.97 16.27 24.12

Composite elbow 45° Made of PPSU, with press sleeve.

40x40mm 50x50mm

16x16x16mm 20x20x20mm 25x25x25mm 32x32x32mm 40x40x40mm 50x50x50mm

1022718 1022719 1022720 1022721 1046390 1046391

10 10 5 5 5 3

4.42 6.61 11.26 17.91 23.34 35.01

Composite tee with reducer Made of PPSU, with press sleeve. A C

Composite elbow 90°

16x16mm 20x20mm 25x25mm 32x32mm 40x40mm 50x50mm

Price each (£)

1046388 1046389

5 3

26.92 35.90

A B C 16x20x16mm 20x16x16mm 20x16x20mm 20x20x16mm 20x25x20mm 25x16x16mm 25x16x20mm 25x16x25mm 25x20x20mm 25x20x25mm 32x16x32mm 32x20x32mm 32x25x25mm 32x25x32mm 40x20x40mm 40x25x32mm 40x25x40mm 40x32x32mm 40x32x40mm 50x25x40mm 50x25x50mm 50x32x50mm

1022722 1022723 1022724 1022725 1022726 1022727 1022728 1022729 1022730 1022731 1022732 1022733 1022734 1022735 1046392 1046393 1046394 1046395 1046396 1046397 1046398 1046399

10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 3 3 3

6.14 6.14 6.14 6.14 10.64 7.41 9.33 8.57 7.97 10.04 12.94 15.70 15.76 16.01 19.18 20.76 20.76 20.20 21.88 25.57 27.50 30.86

Flexible Plumbing & Radiator Heating Uponor MLCP Metal Press Fittings Description Order Code Pack Qty

Price each (£)

Press connection with male thread

Description Order Code Pack Qty

Press elbow 90° with male thread

Made of plated brass, with press sleeve. With BSP male-threaded adaptor for screw connections.

16x½” MT 16x¾” MT 20x½” MT 20x¾” MT 20x1” MT 25x¾” MT 25x1” MT 32x1” MT 32x1¼” MT 40x1¼” MT 40x1½” MT 50x1½” MT 50x2” MT

1014525 1014534 1014561 1014564 1014567 1014589 1014592 1014610 1014613 1046901 1046902 1046905 1046906

10 10 10 10 10 5 5 5 5 5 5 3 3

3.67 7.24 4.57 5.51 8.05 6.95 9.05 10.29 16.18 16.71 21.80 23.75 38.47

Press connection with female thread Made of plated brass, with press sleeve. With BSP female-threaded adaptor for screw connections.

16x½” FT 20x½” FT 20x¾” FT 20x1” FT 25x¾” FT 25x1” FT 32x1” FT 32x1¼” FT 40x1¼” FT 40x1½” FT 50x1½” FT

1014536 1014574 1014577 1014580 1014599 1014602 1014618 1014621 1046903 1046904 1046907

10 10 10 10 5 5 5 5 5 5 3

4.79 5.13 6.63 10.74 7.15 12.63 13.20 19.60 18.75 20.30 22.61

Press connection with female thread (swivel nut) Made of plated brass, with press sleeve and flat sealing washer. Detachable BSP screw fitting for surface-mounted connection of valve assemblies, filters and shutoff taps.

16x½” FT 16x¾” FT 20x½” FT 20x¾” FT 25x1” FT 32x1¼” FT 40x1½“ FT 50x1¾” FT 50x2” FT Press connection Union

1015270 1015274 1015283 1015286 1015297 1015301 1046937 1046938 1046939

10 10 10 10 5 5 5 3 3

9.00 9.74 10.47 11.04 11.78 19.70 25.27 27.19 31.62

NEW Made of plated brass, with flat faced washer seal. Demountable fixing point fitting for ancillary products.

25x25 32x32 40x40 50x50

Price each (£)

1059405 1059406 1059407 1059408

8 5 4 4

16.99 21.99 35.60 42.50

Made of plated brass, with fixed press sleeve. With BSP male-threaded adaptor for screw connections.

16x½” MT 20x½” MT 20x¾” MT 25x¾” MT 25x1” MT 32x1” MT 40x1¼” MT

1014686 1014729 1014732 1014751 1014755 1014770 1046909

10 10 10 5 5 5 5

5.08 7.71 8.08 10.40 11.21 15.11 24.20

Press elbow 90° with female thread Made of plated brass, with fixed press sleeve. With BSP female-threaded adaptor for screw connections.

16x½” FT 20x½” FT 20x¾” FT 25x¾” FT 25x1” FT 32x1” FT 40x1½” FT 50x1½” FT

1014692 1014736 1014739 1014757 1014761 1014774 1046910 1046912

10 10 10 5 5 5 5 3

5.41 7.12 8.68 10.55 11.70 15.88 22.67 26.28

Press elbow 90° Made of plated brass, with press sleeve.

12x12mm 16x16mm 20x20mm 25x25mm 32x32mm 40x40mm 50x50mm

1014648 1014679 1014724 1014746 1014765 1046908 1046911

10 10 10 5 5 5 3

4.53 4.57 6.18 9.99 14.58 21.27 31.18

Press coupling/reducer Made of plated brass, with press sleeve.

12x12mm 16x12mm 16x16mm 20x16mm 20x20mm 25x16mm 25x20mm 25x25mm 32x20mm 32x25mm 32x32mm 40x25mm 40x32mm 40x40mm 50x32mm 50x40mm 50x50mm

1015152 1015159 1015164 1015179 1015187 1015194 1015202 1015205 1015215 1015217 1015219 1046930 1046931 1046932 1046933 1046934 1046935

10 10 10 10 10 5 5 5 5 5 5 5 5 5 3 3 3

5.01 5.15 4.30 5.29 5.76 6.93 7.46 8.61 11.70 12.96 12.96 16.10 18.81 17.55 22.41 23.68 23.72

Flexible Plumbing & Radiator Heating Uponor MLCP Metal Press Fittings Description Order Code Pack Qty

Price each (£)

Description Order Code Pack Qty

Repair coupling

Press tee Made of plated brass, with press sleeve.

12x12x12mm 16x16x16mm 20x20x20mm 25x25x25mm 32x32x32mm 40x40x40mm 50x50x50mm

1014871 1014918 1014976 1015028 1015073 1046921 1046928

10 10 10 5 5 5 3

Repair and compensation coupling, made of plated brass, with elongated press sleeve.

5.80 6.43 9.27 14.16 27.08 30.58 44.81

A B C 16x12x12mm 16x12x16mm 16x20x16mm 20x16x16mm 20x16x20mm 20x20x16mm 20x25x16mm 20x25x20mm 25x12x25mm 25x16x16mm 25x16x20mm 25x16x25mm 25x20x16mm 25x20x20mm 25x20x25mm 25x32x25mm 32x16x32mm 32x20x32mm 32x25x25mm 32x25x32mm 32x50x32mm 40x20x40mm 40x25x32mm 40x25x40mm 40x32x32mm 40x32x40mm 50x25x40mm 50x25x50mm 50x32x50mm 50x40x50mm

Made of plated brass, with press sleeve.

5 5 5

34.25 39.67 43.38

Press tee with male thread Made of plated brass, with press sleeve. Central BSP male-threaded adaptor for screw connections.

1014927 1015038 1015082

10 5 5

10.10 19.29 23.28

Press tee with female thread 1014909 1014910 1014923 1014957 1014961 1014970 1014981 1014983 1014994 1014996 1015000 1015002 1015015 1015017 1015021 1015033 1015053 1015060 1015064 1015068 1046915 1046916 1046917 1046918 1046919 1046920 1046924 1046925 1046926 1046927

10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 3 3 3 3

7.03 7.38 10.52 9.90 10.08 10.08 12.44 12.62 11.52 10.81 10.97 12.26 11.11 11.60 12.72 18.19 16.18 17.24 17.90 19.17 40.26 22.26 25.37 24.89 24.43 26.92 28.80 29.06 35.35 31.02

1014812 1014825 1046913 1046914

5 5 5 3

A C

Made of plated brass, with press sleeve. Central BSP female-threaded adaptor for screw connections.

A B C 16x½” FTx16mm 20x½” FTx20mm 20x¾” FTx20mm 25x½” FTx25mm 25x¾” FTx25mm 32x½” FTx32mm 32x¾” FTx32mm 40x¾” FTx40mm 50x1” FTx50mm

1014931 1014987 1014991 1015044 1015048 1015088 1015091 1046923 1046929

10 10 10 5 5 5 5 5 3

12.80 14.55 15.37 16.42 17.70 19.72 22.28 24.40 29.60

1007078 1007079 1007080 1007081

10 10 5 5

2.99 3.27 3.82 7.62

Press Stop End

16mm 20mm 25mm 32mm

Uponor MLCP Pressure Test Plug Order Code Pack Description Old Code Qty

Nett Price (£)

Pressure Test Plug

Made of plated brass, with press sleeve.

1015212 1015226 1015239

A B C 16x½” MTx16mm 25x¾” MTx25mm 32x¾” MTx32mm

Press elbow 45°

25x25mm 32x32mm 40x40mm 50x50mm

25x25mm 32x32mm 40x40mm

Press tee with reducer

Price each (£)

Reusable plug with ½“ FT designed for pressuretesting of Uponor MLCP installations.

18.38 21.91 40.42 40.42

12mm 16mm 20mm 25mm 32mm 40mm

1013752 1013756 1013760 1013762 1013764 1013765

10 10 10 10 5 2

2.75 1.58 1.64 1.70 3.82 10.03

Uponor’s innovative Modular System SELECT THE BODY SIZE

‘RS2’

‘RS3’

(for 63mm - 75mm)

(for 90mm - 110mm)

SELECT THE BODY CONNECTION TYPE

Tee

45o Elbow

90o Elbow

Coupler

Reducer

CHOOSE ADAPTORS TO SUIT CONNECTION

Adaptor

Female Thread

Male Thread

Flange

300

DIFFERENT FITTINGS ARE REPLACED BY JUST 26

COMPONENTS ARE SUFFICIENT FOR AN ENTIRE SYSTEM 11

Flexible Plumbing & Radiator Heating Uponor Modular System Description Order Code Pack Qty

Price each (£)

Description Order Code Pack Qty

Uponor RS Male Adaptor

Uponor RS Press Adaptor MLCP

Made of tin plated brass. For connection to RS2/RS3 Bodies.

Made of tin plated brass with stainless steel sleeve. For connection of MLCP to RS2/RS3 Bodies. Note: Pressing tool UP75 must be used for pressing all Modular Press Adaptors. See page 17.

RS 2-25 RS 2-32 RS 2-40 RS 2-50 RS 2-63 RS 2-75 RS 3-90 RS 3-110

Price each (£)

1029121 1029122 1046940 1046941 1029125 1029126 1029127 1029128

1 1 1 1 1 1 1 1

19.61 19.61 20.70 20.70 21.51 27.23 76.25 81.69

Uponor RS Elbow 90°

RS 2 MT 2” RS 2 MT 2 ½” RS 3 MT 3”

1029131 1029132 1029133

1 1 1

23.96 32.68 38.12

Uponor RS Female Adaptor Made of tin plated brass. For connection to RS2/RS3 Bodies.

RS 2 FT 1” RS 2 FT 2” RS 2 FT 2 ½” RS 3 FT 3”

1029134 1029135 1029136 1029137

1 1 1 1

16.34 23.96 32.68 38.12

Uponor RS Flange RS 2 RS 3

1029138 1029139

1 1

Made of tin plated brass. PN16 Bolt Circle with 8 holes. For connection to RS3 Bodies.

21.51 65.35

Uponor RS Elbow 45° Made of tin plated brass. Includes 2 lock pins.

RS 3 DN 80 RS 3 DN 100

1029129 1029130

1 1

145.96 160.12

Uponor RS Spacer RS 2 RS 3

1029140 1029141

1 1

Uponor RS Coupling Made of tin plated brass. Includes 2 lock pins.

RS 2 RS 3

1029144 1029145

1 1

19.61 49.02

1029142 1029143

1 1

27.23 70.80

Uponor RS Tee

RS 2 RS 3 Uponor RS Reducer

Made of tin plated brass. Includes 1 lock pin.

RS 3/RS2

1029146

Made of tin plated brass. For connection to RS2/RS3 Bodies.

30.50 70.80

35.94

RS 2 170mm RS 3 250mm RS 2 5mm RS 3 5mm

1046477 1046478 1046750 1046751

1 1 1 1

56.64 98.03 27.23 43.57

U P O N O R SYST E M S C A S E ST U DY

O b e l To w e r

PROJECT: Obel Tower

Client: Karl Construction

Project Size: 233 apartments

Specifier:

Material: Uponor MLCP Modular Riser

Installer:

Delap & Waller Blackbourne Integrated M&E

system

Uponor reach new heights at Obel Obel Tower is not only a highly visible, not to mention impressive, addition to the Belfast skyline but, in terms of prestigious projects, they don’t come much bigger at the moment. At 28-storeys high, it is the tallest building in Ireland and it’s prime geographical position at Donegal Quay – and right beside the M3 - means that anyone travelling through Belfast can’t help but notice the striking glass-fronted structure. So for Uponor, being part of this project is definitely something worth shouting about, particularly when the main players involved in bringing Obel to fruition have such positive comments to make about the experts in flexible plumbing and underfloor heating. Uponor’s MLCP Modular System (16mm110mm) pipework and fittings has been used throughout the buildings, including the 233 apartments in the 28-storey tower and in the

additional apartment block and commercial office development that sits alongside the main structure. M&E contractor, Blackbourne Integrated M&E was high in its praise of Uponor and explained why the company’s products were chosen for Obel. Liam Craughwell, Mechanical Contracts Manager for Blackbourne Integrated M&E, commented,

It was the sheer quality of Uponor MLCP and Modular fittings that lead to being chosen for Obel but central to the range being specified was the cost savings the products offer. In addition, good stock levels and demand planning have been well co-ordinated between the the merchant supplier and Uponor to ensure that all deliveries are on time and complete.

“We have recognised that the building services industry has had to adapt and change from traditional methods, which may not always offer the best solution. We look forward to working together in the future and developing the partnership that has worked so successfully on the Obel project.”

Flexible Plumbing & Radiator Heating MLCP Manifolds, Adaptors & Accessories Order Code

Description

Pack Qty

Price each (£)

Uponor NV Manifold

1 port extension set 2 port 3 port 4 port 5 port 6 port 7 port 8 port

1002189 1002190 1002191 1002192 1002193 1002194 1002195 1002196

1 1 1 1 1 1 1 1

52.44 80.84 108.11 128.97 149.62 170.25 191.21 213.24

LS Manifold The Uponor LS Manifold includes lock shield valves on the flow manifold for balancing the system. The manifold includes chrome plated flow and return headers pre-mounted on nickel plated brackets with fill & drain points. Primary connections are 1” BSP and outlet connections are ¾” Eurocone. Designed for use in Radiator systems. Note: Thermal actuators & Eurocone compression adaptors are supplied separately.

EXTENDED RANGE EXTENDED RANGE EXTENDED RANGE EXTENDED RANGE

1002181 1002182 1002183 1002184 1002185 1002186 1002187 1002188 1048274 1048275 1048276 1048277

1 1 1 1 1 1 1 1 1 1 1 1

86.75 102.84 138.34 169.55 201.51 232.24 265.33 297.75 328.16 357.71 387.40 417.74

¾”/1”

1002280 1002281 1002282 1002284 1002285 1002286

1 1 1 1 1 1

15.41 21.95 30.54 17.15 26.30 33.16

Supplied as a single manifold. Made of plated brass, with 1”MT x 1”FT with ½”MT outlets. Order adaptors separately for connection to Uponor pipe (MLCP/PEX). Manifolds can be joined to make the required number of ports.

7.00

Manifold L ball valve (¾”) Supplied as a single valve. Made of plated brass. Used to isolate the whole manifold assembly.

¾”MT x ¾”FT

1002279

18.97

1.97

Manifold L end cap (with sealing washer) Made of plated brass.

¾” FT

1002275

Manifold L end plug Made of plated brass, with sealing O-Ring.

¾” MT 1” MT

1002273 1002274

20 20

3.23 3.23

Manifold P bracket Supplied as a single bracket. Made of galvanized steel, for the sound absorbing installation of Manifold P.

1”

1014117

8.84

Manifold P cap (with sealing washer) Made of plated brass, for use with Manifold P.

½” FT 1” FT

1014120 1014121

20 20

2.49 4.10

Manifold Connection Fitting with Thermometer and Airvent

1046886

1 1 1

Did you know... LS Manifolds can also be used with Dynamic Energy Management controls for underfloor heating systems. For heating controls, see pages 46-50.

14.32 20.29 24.94

28.28

Automatic Manifold By-Pass Preset to 0.25 bar> For connection between flow and return manifold (TM/LS). Complete with isolation valve for filling purposes.

1048278

59.72

Eurocone compression adaptors (MLCP) Made of plated brass ¾”FT Eurocone thread for connection to ¾”MT manifolds outlets NV/LS/ TM/L.

Manifold P

1014107 1014111 1014109

1002277

For connection to LS/TM Manifold. Can be fitted to left or right hand side of manifold.

Supplied as a single manifold. Made of plated brass, ¾”or 1” MT x FT connections with ½” or ¾” MT outlets. Valves allow each circuit to be isolated. Delivered with loop labelling discs. Order adaptors separately for connection to Uponor pipe (MLCP/PEX). Manifolds can be joined to make the required number of ports.

2 port 1” 3 port 1” 4 port 1”

Price each (£)

Supplied as a single bracket. Holds manifolds in place at a vertical distance of 220mm apart.

Manifold L

2 port ¾” 3 port ¾” 4 port ¾” 2 port 1” 3 port 1” 4 port 1”

Pack Qty

Manifold L bracket

The Uponor NV Manifold includes chrome plated flow and return headers pre-mounted on nickel plated brackets with fill & drain points. Primary connections are 1” BSP and outlet on nickel plated connections are ¾” Eurocone. Designed for use in Radiator systems. Note: Eurocone compression adaptors are supplied separately.

1 port extension set 2 port 3 port 4 port 5 port 6 port 7 port 8 port 9 port 10 port 11 port 12 port

Order Code

Description

12x¾”FT 16x¾”FT 20x¾”FT 25x¾”FT

NEW CODE NEW CODE NEW CODE

1013809 1058090 1058092 1058093

1 1 1 1

5.97 3.29 3.89 7.91

BSP compression adaptors (MLCP) Made of plated brass. For use with Manifold L/P.

12x½” FT 16x½” FT 20x½” FT

NEW CODE NEW CODE

1013831 1058086 1058088

1 1 1

4.10 2.52 5.66

Flexible Plumbing & Radiator Heating Uponor MLCP Radiator & Tapwater Terminations / Accessories Order Code

Description

Pack Qty

Price each (£)

Press connection elbow Robust press radiator connection elbow with 15mm plated or copper spigot (for compression jointing only).

12x75mm Chrome 16x250mm Copper NEW 16x350mm Chrome 16x1100mm Chrome

1014644 1044852 1015626 1015631

20 20 20 20

7.30 9.43 10.33 20.67

Press connection tee Robust press radiator connection tee with 15mm bent plated copper spigot (for compression jointing only).

16x350x16mm

1015628

1013970

2.99

Price each (£)

For adaption of MLCP to other compression fitting bodies. Note, threads must be checked.

12x10mm Brass 12x10mm Chrome 12x15mm Chrome 16x15mm Brass 16x15mm Chrome 20x22mm Brass 25x28mm Brass

1013814 1013815 1013813 1013805 1013806 1013807 1013808

20 20 20 10 10 10 10

3.43 3.53 3.36 1.77 1.93 3.25 7.08

MLCP/copper adaptor fittings Press sleeve and brass spigot for connecting MLCP to copper compression fittings (brass spigot is not suitable for solder connections). NB. A suitable copper olive must be used.

Danfoss connection set

16x½” MT

Pack Qty

Compression adaptor (MLCP)

16.22

Made of plated brass, male-threaded pressure screw. With insert part and clamp ring, with blue O-ring, suitable for use with female-threaded Danfoss radiator valves.

Order Code

Description

16x15mm 20x22mm 25x22mm 25x28mm 32x28mm

1014517 1014556 1014582 1014587 1014605

10 10 10 10 10

4.05 5.40 6.46 10.19 11.61

Wall plate elbow Made of plated brass, with fixed press sleeve and smart end flange. XL denotes extended length body.

16x½” 20x¾”

1015345 1015515

10 5

10.20 9.93

20x½” 25¾”

NEW NEW

1015512 1048471

10 5

7.60 10.50

16x½” XL 20x½” XL

NEW NEW

1046332 1046333

10 10

16.62 17.46

Press Tap U Elbow NEW

Press Lever Ball Valve Fully assembled and sealed lever valve c/w press adaptors to MLCP.

16mm 20mm 25mm 32mm 40mm 50mm 63mm

1046603 1046604 1046605 1046606 1046607 1046608 1046609

6 6 6 6 4 4 2

22.39 30.86 34.22 46.28 86.76 100.47 171.60

Compression Isolation Valve Isolation valves c/w compression adaptors to MLCP.

16x½” FT x16

1015454

16.00

Manthorpe Radiator Pipe Guide and Seal For use with 12mm MLCP and PEX as a seal when exiting the wall behind radiators.

12mm

1046371

16mm 20mm 25mm

1046610 1046611 1046612

10 10 5

12.63 21.27 41.23

7.99

Snap ring Clip-on snap ring made of Polypropylene, available in white only.

12mm 15/16mm 20mm

1011368 1011370 1011372

50 50 50

0.24 0.25 0.25

Flexible Plumbing & Radiator Heating Uponor MLCP Radiator & Tapwater Terminations / Accessories Description

Order Code

Pack Qty

Price each (ÂŁ)

Mounting Plate NEW For use with smart end wall elbows. Designed for on-wall mounting. Allows tap connections with 75mm or 150mm spacings. Supplied with 2 insert pins and screws per plate.

75/150mm

1057840

1.84

Mounting Angle NEW For use with smart end wall elbows. Designed for in-wall mounting and flush finish. Allows tap connections with 75mm or 150mm spacing. Supplied with 2 inserts pins and screws per angle.

75/150mm

1057842

3.60

Mounting Track NEW For use with smart end wall elbows, on-wall or in-wall construction, with mounting steps every 75mm.

2000mm

1057844

12.88

Insert Pins and Screws for Mounting Track NEW For attachment of smart end wall elbows to mounting plate/angle/track. Set contains 10 insert pins and 10 screws.

1057847

4.00

Sound Protection Set NEW For sound insulation of a pair of smart end elbows. Contains shroud, baffle, insert pin and screw.

1057846

NEW

9.60

Smart End Elbow Range For Uponor Tap Water System UPONOR MLC PIPE

www.uponor.co.uk 16

Tools and accessories Uponor MLCP Plumbing Tools Description

Order Code

Pack Qty

Net Price Each (£)

MLCP pliers

Description

Pack Qty

Net Price Each (£) (€)

Inside bending spring Special pipe cutting pliers for Uponor MLCP with an outer diameter of 12-20mm; with corrugated tube cutting attachment.

Pipe cutting pliers 12-20mm Spare blades for cutting pliers

Order Code

1006636 1006637

1 1

29.36 4.88

Pipe cutter Pipe cutter for use with Uponor MLCP.

Bending spring for use with Uponor MLCP.

12mm 16mm 20mm 25mm 32mm

1013726 1013729 1013734 1013737 1013739

2.77 1.77 1.81 3.01 3.72

1 1 1 1 1

Outside bending spring Bending spring for use with Uponor MLCP.

Pipe cutter 14-32mm Spare cutting blade

1013719 1013721

1 1

20.33 8.17

Pipe cutting tool Cutting tool for use with Uponor MLCP.

16mm 20mm 25mm

2.47 2.21 3.04

1 1 1

1006640 1013792 1013794

Bending tool 16-32mm Pipe cutting tool 25-63mm Spare cutting disc Pipe cutting tool 50-75mm Spare cutting disc

1006634 1006635 1014171 1014173

1 1 1 1

26.54 2.31 48.68 3.75

Bending tool for producing series of identical curves in Uponor MLCP, supplied in carrying case complete with set of bending inserts.

16,20,25,32

Supplied in carrying case, complete with battery and charger unit. Range of application: 14-110mm.

Ideal for use when installing floating floor panels to cut extra grooves and channels in the insulation. Head cuts 15mm groove as standard that will also accommodate 16mm pipe.

1006293 1006290

1 1

95.89 85.44

Bevelling tool 12–25 Installation tool for the bevelling of Uponor MLCP. Supplied with turning handle (can also be used as cordless screwdriver attachment, see instructions).

12mm 14mm 16mm 20mm 25mm

1015837 1006952 1006830 1015749 1015756

1 1 1 1 1

22.47 8.14 7.95 8.24 9.48

Bevelling tool 32-75 Installation tool for the bevelling of Uponor MLCP. Supplied with turning handle (can also be used as cordless screwdriver attachment, see instructions).

32mm 40mm 50mm 63mm 75mm

1015762 1006638 1015808 1014339 1014344

1 1 1 1 1

13.06 19.48 22.17 27.26 35.83

3-size bevelling tool Installation tool for the bevelling of Uponor MLCP.

16/20/25mm

138.09

Battery pressing tool UP 75

Polystyrene hot cutter

110V 230V

1013773

1015739

10.17

Press tool Spare Battery 12V/3Ah Spare re-charging unit

1 1 1

1006827 1006949 1006950

895.92 54.10 58.17

Pressing jaws Jaws for use with Uponor MLCP press fittings, for use with UP75.

16mm 20mm 25mm 32mm 40mm 50mm

1007084 1007086 1007087 1007088 1015768 1015792

1 1 1 1 1 1

55.06 55.06 55.06 55.06 104.13 109.55

Pressing chain Pressing chain for use with 63-110mm Uponor MLCP Press Fittings, to be used in conjunction with UP75 pressing tool and base pressing unit.

63mm pressing chain 75mm pressing chain 90mm pressing chain 110mm pressing chain

1046541 1046542 1046543 1046544

364.89 435.69 544.61 653.54

1 1 1 1

Base pressing unit For linking pressing chain to the UP75.

63-110mm base pressing unit

1046545

157.94 17

Tools and accessories Uponor MLCP Plumbing Tools Order Code

Description

Pack Qty

Net Price Each (£)

Inserts for manual pressing tool

Description

1002128 1015776 1015777 1015780

1 1 1 1

28.34 29.75 29.75 29.75

Mini 32 Pressing Tool for MLCP An alternative to the existing UP75 battery pressing tool, the Mini 32 can press all existing metal and composite press fittings from 12mm up to 32mm, without the need for external power (External power needed to charge batteries). Note: Cannot be used with Uponor MLCP Modular fittings.

Press Tool (excl. jaw sets) Spare Battery 9.6V/2.0Ah

1007096 1015703

1 1

569.19 56.91

12mm 16mm 20mm 25mm 32mm 40mm

Note: Cannot be used with Uponor MLCP Modular fittings.

1007089 1007091 1007093 1007094 1007095

1 1 1 1 1

59.85 59.85 59.85 63.81 63.81

www.uponor.co.uk

10 10 10 10 5 2

2.75 1.58 1.64 1.70 3.82 10.03

Set consists of pipe cutting tool and bevelling tool suitable for use with Uponor MLCP (outer diameter: 63-110mm). Supplied in carrying case.

63-110mm

1014322

420.53

Pipe straightener For the fast, simple, straight alignment of Uponor MLCP supplied in coils (14mm to 32mm). Adjustable to the desired size. Can be used in combination with the Uponor MLCP uncoilers.

Pipe straightner

1010512

144.50

Manual pressing tool Designed for use with Uponor MLCP 1220mm press fittings (in conjunction with inserts for manual pressing tool). Supplied in carrying case without inserts for pressing tool.

12-20mm

Special deals available on tool purchases and hire

Contact your Uponor representative or speak to your local plumbers or builders merchant today for more details.

1013752 1013756 1013760 1013762 1013764 1013765

Tool set 63–110

To be used with Mini 32.

Net Price Each (£)

Reusable plug with ½“ FT designed for pressure-testing of Uponor MLCP installations.

Mini jaw set

12mm 16mm 20mm 25mm 32mm

Pack Qty

Pressure test plug For fitting to the manual pressing tool for the handling of 12-20mm Uponor MLCP press fittings.

12mm 14mm 16mm 20mm

Order Code

1015764

147.91

The Complete Plumbing system

Uponor Q&E

The Complete Plumbing system A complete and extensive product line of pipes, fittings, tools and accessories to suit any kind of plumbing installation.

Simple Secure Complete Adaptable High Flow Hardwearing

Uponor Q&E The thermal memory system that never forgets to stay secure

www.uponor.co.uk

Flexible Plumbing & Radiator Heating Uponor Q&E PEX Pipe & Rings Order Code

Description

Uponor Q&E Plastic Fittings Pack Qty

Price per/m (£)

PEX Pipe white, supplied in straight lengths

NEW CODE NEW CODE NEW CODE

1058803 1058804 1058805

Pack Qty

Price each (£)

Coupling

Diffusion-resistant PEX pipes, five-layer (PEX – adhesive agent – oxygen barrier – adhesive agent – PEX), for general plumbing and radiator connection applications. Manufactured to ISO 15875 for hot and cold water and heating applications with full WRAS approval.

16x1.8mm 20x1.9mm 25x2.3mm

Order Code

Description

75m 48m 30m

1.53 2.90 3.82

Made from Engineered Plastic (PPSU). Uponor PEX plumbing system on both ends.

16mm 20mm 25mm

NEW CODE NEW CODE NEW CODE

1008669 1008932 1008671

5 5 5

0.75 1.19 1.96

Elbow 90o Made from Engineered Plastic (PPSU). Uponor PEX plumbing system on both ends.

PEX Pipe white, supplied in coils Diffusion-resistant PEX pipes, five-layer (PEX – adhesive agent – oxygen barrier – adhesive agent – PEX), for general plumbing and radiator connection applications. Manufactured to ISO 15875 for hot and cold water and heating applications with full WRAS approval.

16x1.8mm 16x1.8mm 16x1.8mm 16x1.8mm 20x1.9mm 25x2.3mm

NEW CODE NEW CODE NEW CODE NEW CODE NEW CODE NEW CODE

1059173 1059182 1059183 1058802 1059174 1059175

50m 100m 200m 500m 50m 50m

1.39 1.39 1.39 1.39 2.71 3.80

16mm 20mm 25mm

16mm - Red 16mm - Blue 20mm - Red 20mm - Blue 25mm - Red 25mm - Blue

NEW CODE NEW CODE NEW CODE NEW CODE NEW CODE NEW CODE

1059179 1059176 1059180 1059177 1059181 1059178

50m 50m 50m 50m 50m 50m

2.34 2.34 2.90 2.90 3.30 3.30

PEX conduit Made of high-density polyethylene. Supplied in coils. Details and prices of a wide range of other sizes of conduit are available on request. First number shown in description refers to O.D. of the protective tube. The second is the size of PEX pipe suitable. N.B. Does not include PEX Pipe.

25 Black (16mm) 34 Black (20mm) 42 Black (25mm)

1012860 1012864 1012872

50m 50m 25m

Must be used on all Uponor Q&E PEX plumbing system joints.

16mm Blue 16mm Red 20mm Blue 20mm Red 25mm Blue 25mm Red

NEW CODE NEW CODE NEW CODE NEW CODE NEW CODE NEW CODE

1042386 1042387 1042834 1042835 1042838 1042839

20 20 20 20 20 20

0.20 0.20 0.25 0.25 0.30 0.30

All fittings are supplied without Uponor Q&E PEX Rings which must be ordered separately. All non-compression joints must be made using Uponor PEX tooling (page 24). 20

5 5 5

0.90 1.43 2.81

Made from Engineered Plastic (PPSU). Uponor PEX plumbing system on all ends.

NEW CODE

16mm 20mm 25mm

NEW CODE NEW CODE

1008684 1008685 1008686

5 5 5

1.30 1.93 3.24

Tee with reducer B C

Made from Engineered Plastic (PPSU). Uponor PEX plumbing system on all ends.

A B C 16x20x16mm 20x16x16mm 20x16x20mm 20x20x16mm 20x25x20mm 25x16x16mm 25x16x20mm 25x16x25mm 25x20x16mm 25x20x20mm 25x20x25mm 25x25x20mm

NEW CODE NEW CODE NEW CODE NEW CODE NEW CODE NEW CODE NEW CODE NEW CODE NEW CODE NEW CODE NEW CODE NEW CODE

1008710 1008700 1008689 1008697 1008711 1008702 1008699 1008690 1008701 1008703 1008691 1001420

5 5 5 5 5 5 5 5 5 5 5 5

2.17 2.17 2.17 2.17 3.27 3.27 3.27 3.27 3.27 3.27 3.50 3.50

Female centre tee Made from Engineered Plastic (PPSU).

0.86 1.59 1.86

Uponor Q&E PEX rings

1008679 1008680 1008681

Equal Tee

PEX Pipe-in-Pipe Uponor pipe-in-pipe system is designed to be integrated into the building structure and to be covered by screeds. Pipe can be withdrawn without damage to the building structure. Uponor pipe-inpipe complies with the requirements of the Water Regulations 1999.

NEW CODE NEW CODE NEW CODE

A B C 16x½”x16mm 20x½”x20mm 25x½”x25mm 25x¾”x25mm

NEW CODE NEW CODE NEW CODE NEW CODE

1042338 1042339 1042340 1042341

5 5 5 5

2.99 3.99 4.99 5.25

Male thread adaptor Uponor PEX plumbing system on one end. With BSP male-threaded adaptor for screw connections.

16x½” MT 20x½” MT 20x¾” MT 25x¾” MT 25x1” MT

NEW CODE NEW CODE NEW CODE NEW CODE NEW CODE

1008661 1008662 1008663 1008664 1008665

5 5 5 5 5

2.40 2.80 2.80 2.99 3.90

Flexible Plumbing & Radiator Heating Uponor Q&E Plastic Fittings & Manifolds Description Order Code Pack Qty

Price each (£)

Description Order Code Pack Qty

Manifold PEX (PPSU), BSP inlet NEW

Female thread adaptor Uponor PEX plumbing system on one end. With BSP female-threaded adaptor for screw connections.

16x½” FT 20x½” FT 20x¾” FT 25x¾” FT 25x1” FT

NEW CODE NEW CODE NEW CODE NEW CODE NEW CODE

1042329 1042330 1042331 1042332 1042333

5 5 5 5 5

3.25 4.20 4.20 5.00 9.00

Supplied as a single manifold. Made from Engineered Plastic (PPSU). Use with Uponor Q&E PEX rings

¾”x16x16x16mm ¾”x20x16x16mm ¾”x16x16x16x16mm ¾”x20x16x16x16mm

1008714 1008716 1008715 1008717

1 1 1 1

6.99 6.99 7.30 7.30

Manifold PEX (PPSU), Q&E inlet NEW

Tap connector straight

Supplied as a single manifold. Made from Engineered Plastic (PPSU). Use with Uponor Q&E PEX rings

Uponor PEX plumbing system on one end. With BSP female-threaded adaptor for screw connections. Washer included.

16x½” FT 20x½” FT 20x¾” FT 25x¾” FT 25x1” FT

NEW CODE NEW CODE NEW CODE NEW CODE NEW CODE

1038021 1038022 1038023 1038024 1038025

1 1 1 1 1

3.99 4.30 4.99 5.99 6.99

25/20x16x16mm 25/20x16x16x16mm 25/16x16x16mm 20/16x16x16x16mm

1008720 1008721 1008718 1008719

1 1 1 1

7.30 7.30 6.99 6.99

Manifold H PEX (PPSU), Q&E inlet NEW

Wall plate elbow Uponor PEX plumbing system on one end. With BSP female-threaded adaptor for screw connections.

16x½” 20x½”

NEW CODE NEW CODE

1042342 1042343

5 5

3.99 4.59

Reducer Uponor PEX plumbing system on both ends.

20x16mm 25x16mm 25x20mm

NEW CODE NEW CODE NEW CODE

1008674 1008675 1008676

5 5 5

Supplied as a single manifold. Made from Engineered Plastic (PPSU). Use with Uponor Q&E PEX rings

20/20x16x16mm 20/20x16x16x16mm 25/20x16x16mm 25/20x16x16x16mm

NEW CODE NEW CODE NEW CODE NEW CODE

1.25 2.00 2.50

¾”

3.99 3.99 3.99 3.99

1001338

5.80

Modular manifold c/c 50 NEW

1042334 1042335 1042336 1042337

5 5 5 5

2.99 4.99 4.99 5.99

Made from Engineered Plastic (PPSU), c/w BSP outlets

1xG½” 1xG¾”

1 1 1 1

4.30 4.99 5.99 7.99

1 1

7.00 6.50

Made from Engineered Plastic (PPSU) c/w with Uponor Q&E outlets

Uponor PEX plumbing system on one end. With BSP female-threaded adaptor for screw connections. Washer included.

1038037 1038038 1038039 1038040

1047997 1047998

Modular manifold Q&E c/c 50 NEW

Tap connector elbow 90deg

NEW CODE NEW CODE NEW CODE NEW CODE

1 1 1 1

For use with Manifold PEX. Not suitable for use with modular manifolds.

Uponor PEX plumbing system on one end. With BSP female-threaded adaptor for screw connections.

16x½” FT 20x½” FT 20x¾” FT 25x¾” FT

1008722 1008723 1008724 1008725

Manifold PEX brackets

Elbow 90o with female thread

16x½” FT 20x½” FT 20x¾” FT 25x¾” FT

Price each (£)

2x16 3x16 4x16

1047999 1048000 1048001

1 1 1

7.99 8.99 11.99

Flexible Plumbing & Radiator Heating Uponor Q&E PEX Radiator Terminations & Accessories

Uponor Q&E PEX Manifolds & Fittings Order Code

Description

Pack Qty

Price each (£)

NEW

Modular straight connection

Order Code

Description

1048002

Modular elbow connection

5.99

NEW

Made from Engineered Plastic (PPSU). For 90 degree adaption from Modular manifold, BSP thread.

¾” Modular end cap

Price each (£)

Compression adaptors (PEX Pipe) NEW

Made from Engineered Plastic (PPSU). For straight adaption from Modular manifold, BSP thread.

¾”

Pack Qty

1048003

5.99

Brass compression fitting to be used in conjunction with standard 15mm compression fitting bodies. Compatibility of threads must be checked.

16x½” FT 20x½” FT

1058934 1058935

Manifold adaptors (PEX Pipe)

2.13 5.19

NEW

Made of plated brass. For use with Manifold L/P.

16x½” FT 20x½” FT

1059510 1059511

Eurocone compression adaptors (PEX Pipe)

NEW

1 1

2.13 5.19

NEW

Made of plated brass ¾”FT Eurocone thread for connection to ¾”MT outlets of NV/LS/TM Manifolds.

1”

1048004

Modular end cap c/w air nipple

2.90

NEW

16x¾”FT 20x¾”FT

1057368 1057370

Radiator connection pipe c/w stop end

1 1

3.40 5.81

NEW

For easy first fix installation of radiators. After pressure testing, cut off stop end, then make connection

1”

1048005

Modular manifold wall bracket

9.99 16x200mm

NEW

Bag includes two wall brackets, two long - and two short clips.

1”

1048005

1008281

5.99

NEW

Uponor PEX plumbing system on one end. Plated brass elbow with 15mm plated brass spigot for connecting Uponor PEX plumbing system to radiators.

16x300mm For sealing off Uponor 1/2” outlets during pressure testing

Copper adaptor

Radiator connection elbow

5.50

Blanking plug NEW

½” MT

1042320

9.99

Single bend guide plastic Used to curve and protect Uponor PEX 16mm pipe-in-pipe up out of the floor leaving only the Uponor PEX 16mm pipe exposed through the floor. Protects the pipe below floor level. Price refers to single bend guide.

1.50

NEW To adapt to Uponor Q&E PEX pipe from copper. Allow to cool before making Q&E joint.

1023045

1009008

5.62

Snap ring Clip-on snap ring made of Polypropylene, available in white only.

16x15mm 20x22mm 25x22mm 25x28mm

1023040 1047941 1023042 1047942

5 5 5 5

1.50 3.40 2.99 3.99

15/16mm

1011370

0.25

Flexible Plumbing & Radiator Heating Uponor Q&E PEX Accessories Order Code

Description

Pack Qty

Price each (ÂŁ)

Pipe clips

Description

Order Code

Pack Qty

Price each (ÂŁ)

PEX Pipe bend supports Pipe clips made of white plastic.

12mm 15/16mm 20mm 22/25mm 28/32mm 40mm

1013141 1013142 1013144 1013145 1013146 1013147

These should be used for all pipe and pipe-in-pipe bends. Use the correct bend support to match the outer diameter of the pipe or of the conduit.

100 100 50 50 50 25

0.49 0.49 0.63 0.80 1.58 1.97

Single plugged hook For the fast attachment of pipes with outer diameter of up to 32mm. Suitable for use on concrete floor.

60mm 80mm

1013137 1013138

25mm 34mm

1 1 1

1.59 2.15 3.60

50 20

0.36 0.96

1009014 1009015

For use with Uponor PEX plumbing in old sizes 15x1.5, 22x2.0, 28x2.6mm. Allows modification and repairs in conjunction with standard compression fitting.

0.32 0.32

Robust bend support and white powder coated aluminium upstand to protect pipe between floor and radiator. Price refers to a pack of two guides.

1002237

1002038 1002039 1002040

Uponor PEX insert spares

Radiator connection guide (solid floor)

12/16mm

1.59 2.34 3.29 3.73

0.29 0.29

50 50

1 1 1 1

For nailing conduit in position.

For the fast attachment of pipes with outer diameter of up to 32mm. Suitable for use on concrete floor.

1013139 1013140

1009004 1009233 1009006 1001231

Conduit pipe clip

Twin plugged hook

60mm 80mm

Metal 15mm/16mm 20mm 25mm 28-34mm Plastic 15mm/16mm 20mm 25mm

15mm 22mm 28mm

1002034 1002035 1002036

1 1 1

0.54 1.02 0.75

14.83

Radiator connection guide (joisted floor) Robust white powder coated aluminium upstand to protect pipe between floor and radiator. Price refers to a pack of two guides.

12/16mm

1002238

13.98

Chromed Upstand Pipe Pack (750mm) Chrome upstand to protect pipe between floor and radiator. For use with both pipe-in-pipe and pipe without conduit. Pack of two upstands.

12/16mm

1002239

22.03

Chromed Upstand Pipe Pack (250mm) Chrome upstand to protect pipe between floor and radiator. For use with both pipe-in-pipe and pipe without conduit. Pack of two upstands.

12/16mm

1002240

12.16

Flexible Plumbing & Radiator Heating Uponor PEX Plumbing Tools Order Code

Description

Pack Qty

Net Price Each (£)

Description

Order Code

Pack Qty

1008334

Net Price Each (£)

Graphite paste 30gm tube

Plastic pipe cutters Cost effective PEX pipe cutters to leave the perfect jointing finish.

Pipe cutter 12-28mm Pipe cutter 12-40mm

1001369 1001370

1 1

8.46 28.10

Pipe and conduit cutter

30g

1.42

Hydraulic test pump This tool is specially designed for cutting pipein-conduit. Conduit cutter is guarded to prevent damage to the pipe inside the conduit. Maximum pipe diameter 22mm.

Cutter

1009031

Milwaukee expander tool set

25.71

NEW

Includes 1x 230V, 50Hz fast battery charger, 2x 14.4V /1.5Ah Li-ion Batteries, 1x 100g tube of Molykote tool lubricant, 1x operation manual, 1x lightweight plastic case. Expander heads included.

M12 Expander tool

1057166

Use to pressure test all UFH and plumbing installations before screeding and before commissioning. Capacity 5 litres. Maximum pressure 25 bar. Connection is ½” MI.

5 Litres 25 BAR

1004057

126.60

Autorotation head Used in conjunction with item 1004000

1038188

399.00*

86.60

Uponor PEX hand tool set and heads Complete tool set in a box. Includes all 3 expander heads and instructions.

3 Heads (16, 20, 25mm)

NEW CODE

1004000

299.00*

* denotes List Price

Q&E TOOL DEALS

MLCP TOOL DEALS Contact your Uponor representative or speak to your local plumbers or builders merchant today for more details.

Milwaukee Expander Tool Set 1057166

www.uponor.co.uk

Mini 32 Pressing Tool for MLCP 1007096

Pre-insulated Pipe System • Designed especially for heating water (Thermo), hot tap water (Aqua) and cooling water (Supra) • Applications - district heating and cooling, remote boilers, biomass, CHP, industrial fluids • High Flexibility • Service life of at least 30 years • No special tools required • Available ‘cut-to-length’

Pre-insulated Pipe Systems - Easy as 1, 2, 3! Stage 1

Stage 2

Stage 3

Pick your application pipe and length...

Pick your End cap, one for each end...

Pick your coupler. . .

Order Code

Description

Order Code

Thermo Single

1018109 1018110 1018111 1018112 1018113 1018114 1018115 1018116

25/140 32/140 40/175 50/175 63/175 75/200 90/200 110/200

Rubber end-cap 1018315 1018315 1018313 1018313 1018312 1018310 1018310 1018310

Thermo Twin

1018134 1018135 1018136 1018137 1018138

2x25/175 2x32/175 2x40/175 2x50/200 2x63/200

Thermo Mini

1018132 1018133

Aqua Single

Aqua Twin

Quattro

Description

1018328 1018329 1018330 1018331 1018332 1018333 1018334 1018335

25x1” 6B 32x1” 6B 40x1¼” 6B 50x1¼” 6B 63x2” 6B 75x2” 6B 90x3” 6B 110x3” 6B

Rubber end-cap 1018309 2x 25+32+40/175 1018309 2x 25+32+40/175 1018309 2x 25+32+40/175 1018307 2x 40+50+63/200 1018307 2x 40+50+63/200

WIPEX Coupling, 6 bar / 95°C

1018328 1018329 1018330 1018331 1018332

25x1” 6B 32x1” 6B 40x1¼” 6B 50x1¼” 6B 63x2” 6B

25/68 32/68

Rubber end-cap 1018316 1018316

WIPEX Coupling, 6 bar / 95°C

1018328 1018329

25x1” 6B 32x1” 6B

1018117 1018118 1018119 1018120 1018121

25/140 32/140 40/175 50/175 63/175

Rubber end-cap 1018315 25+32/140 1018315 25+32/140 1018313 32+40+50/175 1018313 32+40+50/175 1018312 63+75/175

WIPEX Coupling, 10 bar / 95°C

1018336 1018338 1018339 1018340 1018341

25x1” 10B 32x1” 10B 40x1¼” 10B 50x1¼” 10B 63x2” 10B

1018139

25+25/175

Rubber end-cap 1018309 2x 25+32+40/175

WIPEX Coupling, 10 bar / 95°C

1018336

25x1” 10B

1018140

32+25/175

1018309 2x 25+32+40/175

1018338 1018336

32x1” 10B 25x1” 10B

1018141

40+25/175

1018309 2x 25+32+40/175

1018339 1018336

40x1¼” 10B 25x1” 10B

1018142

50+25/175

1018308 2x 25+32+50/175

1018340 1018336

50x1¼” 10B 25x1” 10B

1018328 1018336

25x1” 6B 25x1” 10B

Thermo Aqua 1018147 2x25/25+25/175

25+32/68 25+32/68

Rubber end-cap 1018306

175 Quattro

1018306

175 Quattro

1018329 1018336

32x1” 6B 25x1” 10B

1018306

175 Quattro

1018329 1018338 1018336

32x1” 6B 32x1” 10B 25x1” 10B

1018149 2x32/32+25/175

Description

WIPEX Coupling, 6 bar / 95°C

25+32/140 25+32/140 32+40+50/175 32+40+50/175 63+75/175 75+90+110/200 75+90+110/200 75+90+110/200

1018148 2x32/25+25/175

Supra

Order Code

1018124 1018125 1018126 1018127 1018128 1018129 1018130 1018131

25/68 32/68 40/140 50/140 63/140 75/175 90/175 110/200

Rubber end-cap 1018316 1018316 1018314 1018314 1018314 1018312 1018311 1018310

25+32/68 25+32/68 40+50+63/140 40+50+63/140 40+50+63/140 63+75/175 90+110/175 75+90+110/200

WIPEX Coupling, 10 bar / 95°C

Plasson coupling 1018400 1018401 1018402 1018403 1018404 1018405 1018406 1018407

25x¾” 32x1” 40x1¼” 50x1½” 63x2” 75x2½” 90x3” 110x4”

Don’t forget shipping costs - Pre-Insulated Pipe Systems: Zone

Pre-insulated Pipe delivery charges apply to orders of net invoice value under £1000 only (excl. VAT & delivery).

The shaded areas on the map relate to Pre-Insulated Pipe delivery (orders under £1000 only). Please refer to the key above.

IV AB

PH DD

Delivery on Pre-Insulated orders over £1000 net is free!

Collection also available by appointment.

EH ML

NE* DH

SR TS

DL LA BT

HX BL OL WN HD M

DN LN

SK CH

Republic of

Ireland

NR PE

TF SY*

SA*

SN RG

BS BA SP

TA EX DT

CO CM

AL WD HA UB TW KT

RM BR

GU TN

RH BN

London Postcodes

PL TQ TR

Illustrations correct at time of printing. April 2012. E&OE.

E WC

EC SE

Pre-insulated Pipe Systems Uponor Pre-Insulated Pipe Order Code

Description

Pack Qty

Price per/m (£)

Order Code

Description

Price per/m

Aqua Twin

Thermo Mini Pre-insulated Single pipe PEX, max. 6 bar / 95°C heating. Also available with heat trace cable on request. Use Wipex 6 bar coupling.

25/68 32/68

1018132 1018133

200 200

22.75 26.36

Thermo Single Pre-insulated Single pipe PEX, max. 6 bar / 95°C heating. Also available with heat trace cable on request. Use Wipex 6 bar coupling.

25/140 32/140 40/175 50/175 63/175 75/200 90/200 110/200

1018109 1018110 1018111 1018112 1018113 1018114 1018115 1018116

200 200 200 200 200 100 100 100

34.39 37.35 48.99 52.44 59.43 80.95 91.07 108.45

Pre-insulated Twin pipe PEX, max. 10 bar / 95°C warm water. Use Wipex 10 bar coupling.

25+25/175 32+25/175 40+25/175 50+25/175

Pre-insulated Twin pipe PEX, max. 6 bar / 95°C heating. Use Wipex 6 bar coupling.

2x25/175 2x32/175 2x40/175 2x50/200 2x63/200

1018134 1018135 1018136 1018137 1018138

200 200 200 100 100

47.13 53.57 57.77 78.93 95.28

25/140 32/140 40/175 50/175 63/175

1018117 1018118 1018119 1018120 1018121

200 200 200 200 200

35.67 39.76 52.77 61.99 71.42

200 200 200 200

50.69 53.69 58.66 66.52

Pre-insulated Quattro pipe PEX, max. 6 bar and 10 bar / 95°C,heating / warm water. (Contains 2 x Thermo Pipes and 2 x Aqua Pipes).

Thermo Aqua 2x25/25+25/175 2x32/25+25/175 2x32/32+25/175

1018147 1018148 1018149

200 200 200

69.55 76.37 79.85

Supra Order to leadtime direct from Germany. Pre-insulated Single pipe PE-HD, max. 16 bar / 20°C chilled water. Potable Water. Also available with antifreeze cable on request. Use Plasson coupling or Wipex 6 bar Coupling.

25/68 32/68 40/140 50/140 63/140 75/175 90/175 110/200

1018124 1018125 1018126 1018127 1018128 1018129 1018130 1018131

200 200 200 200 200 100 100 100

21.56 22.25 46.84 49.18 53.49 51.99 56.21 77.62

Supra Plus Pre-Insulated, Single PE-HD pipe for chilled potable water, complete with freeze protection cable.

Aqua Single Pre-insulated Single pipe PEX, max. 10 bar / 95°C warm water. Also available with heat trace cable on request. Use Wipex 10 bar coupling.

1018139 1018140 1018141 1018142

Quattro

Thermo Twin

25/68 32/68 40/140 50/140 63/140 75/175 90/175 110/200

1048902 1048903 1048904 1048905 1048906 1048907 1048908 1048909

Supra Plus Improvements

• Longer cable lengths - longer pipe lengths and less connections • New control unit - for easier wiring and installation

Pack Qty

150 150 150 150 150 100 100 100

42.38 43.07 67.65 70.01 74.31 75.09 77.01 98.43

Pre-insulated Pipe Systems Pre-Insulated Pipe End Caps & Internal Termination Cover Order Code

Description

Pack Qty

Price each (£)

Rubber end-cap set

Description

Order Code

Pack Qty

1018310 1018311 1018312 1018313 1018314 1018315 1018316

1 1 1 1 1 1 1

Price each

Rubber end-cap set

Twin40+50+63/200 Twin25+32+50/175 Twin25+32+40/175

1018307 1018308 1018309

1 1 1

43.15 42.13 38.22

Quattro

1018306

41.08

75+90+110/200 90+110/175 63+75/175 32+40+50/175 40+50+63/140 25+32/140 25+32/68

42.73 53.83 39.25 39.25 32.69 32.29 24.20

End Cover For above ground termination inside a building. Suitable for Single, Twin and Quattro pipes.

140mm 175mm 200mm

1045310 1045311 1045312

1 1 1

Description

Order Code

Pack Qty

1042970 1042974 1042979 1042983 1042982

1 1 1 1 1

24.05 26.62 32.10

Pre-Insulated Pipe Fittings and Components Order Code

Description

Pack Qty

Price each (£)

WIPEX Coupling, 6 bar / 95°C

Price each (£)

WIPEX Jointing Equal PN10

Used with the following piping systems: Thermo Single, Thermo Twin, Thermo Mini Quattro and Supra. Compression fitting with male thread for connection.

25x1” 32x1” 40x1¼” 50x1¼” 63x2” 75x2” 90x3” 110x3”

1018328 1018329 1018330 1018331 1018332 1018333 1018334 1018335

1 1 1 1 1 1 1 1

20.75 22.81 29.96 40.24 68.24 95.12 136.13 169.50

25mm 32mm 40mm 50mm 63mm WIPEX T-piece

Used with the following piping systems: Aqua Single, Aqua Twin, Thermo Single, Thermo Twin, Thermo Mini and Quattro.

WIPEX Coupling, 10 bar / 95°C Used with the following piping systems: Aqua Single, Aqua Twin and Quattro. Compression fitting with male thread for connection.

25x1” 32x1” 40x1¼” 50x1¼” 63x2”

1018336 1018338 1018339 1018340 1018341

1 1 1 1 1

21.54 24.11 29.99 41.68 65.66

1” 1¼” 2” 3”

25mm 32mm 40mm 50mm 63mm 75mm 90mm 110mm

1042972 1042973 1042980 1042984 1042981 1042985 1042986 1042987

1 1 1 1 1 1 1 1

29.46 36.42 46.94 70.89 116.24 173.54 239.09 332.57

1018345 1018346 1018347 1018348

1 1 1 1

21.83 24.77 50.31 116.71

WIPEX 90° bend Used with the following piping systems: Aqua Single, Aqua Twin, Thermo Single, Thermo Twin, Thermo Mini and Quattro.

WIPEX Jointing Equal PN6 Single fitting for joining two lengths of pipe together. For: Thermo Single, Thermo Twin, Thermo Mini, Quattro and Supra.

29.22 37.54 46.98 71.37 116.24

1” 1¼” 2” 3”

1018350 1018351 1018352 1018353

1 1 1 1

18.46 23.10 54.84 101.15

WIPEX Joint Used with the following piping systems: Aqua Single, Aqua Twin, Thermo Single, Thermo Twin, Thermo Mini and Quattro.

1” 1¼” 2” 3”

1018355 1018356 1018357 1018358

1 1 1 1

12.57 17.10 31.70 45.76 29

Pre-insulated Pipe Systems Pre-Insulated Pipe Fittings, Components and Accessories Description

Order Code

Pack Qty

Price each (£)

WIPEX Flange

Price each (£)

1018359 1018360 1018362 1018364

1 1 1 1

48.80 67.15 128.77 147.84

Used with 25mm and 32mm Thermo Mini and Supra pipes when connecting into insulation sets.

140/68

1 1 1 1 1 1 1

26.24

With heat-shrinkable tube. Can be used wherever there is no pressurized water.

Used with the following piping systems: Aqua Single, Aqua Twin, Thermo Single, Thermo Twin, Thermo Mini and Quattro.

1018368 1018369 1018371 1018372 1018374 1018375 1018376

1007357

Entry sleeve, non-pressure waterproof

WIPEX Reducer

1¼”x1” 1½”x1¼” 2”x1” 2”x1¼” 3”x1” 3”x1¼” 3”x2”

Pack Qty

Reducer rings Used with the following piping systems: Aqua Single, Aqua Twin, Thermo Single, Thermo Twin, Thermo Mini and Quattro.

1” 1¼” 2” 3”

Order Code

Description

14.28 14.28 37.36 30.97 71.18 55.96 56.45

Plasson coupling (to be used with Supra Pipe only)

68/90 175 & 200/250 140/175

1018266 1018268 1018269

1 1 1

39.21 52.29 42.95

1 1 10

30.83 32.60 9.57 (per/m)

Shrinkable sleeve for chamber, order to lead-time Heat-shrinkable tube for chamber.

175mm 200mm Sealing tape

1018380 1018381 1018382

Chamber with lid, order to lead-time 25x¾” 32x1” 40x1¼” 50x1½” 63x2” 75x2½” 90x3” 110x4”

1018400 1018401 1018402 1018403 1018404 1018405 1018406 1018407

1 1 1 1 1 1 1 1

9.44 12.62 21.11 31.08 41.23 77.33 147.91 176.33

Designed to accommodate pipe connections which cannot be made with an Uponor T-insulation set, e.g. for connecting Uponor Single to Twin pipes or for Uponor Quattro pipelines. Lead-time typically 2 weeks. Size 980 (d) x 685 (h) x 1660 (l), 50kg.

6x140/175/200 8x140/175/200

1018326 1018327

1 1

1,051.91 1,174.68

Trench warning tape with imprint and symbols. Colour: red

Elbow insulation set For use with WIPEX fittings within a trench.

ONE SIZE

1021991

307.12

T-Insulation set For use with WIPEX fittings within a trench.

ONE SIZE

1021990

For use with WIPEX fittings within a trench.

1021992

1018378

30m

17.85 (per/m)

Supra Plus Connection Set Set includes Supra Plus Control Unit, 2 rubber end caps, 5m sensor cable, fixing screws, cable connections and full instructions. Control unit requires 230V supply.

579.94

Insulation set for straight joints For use with WIPEX fittings within a trench.

ONE SIZE

28.59

Shrinkable tape

255mm

1007355

250m

356.76

‘H’ insulation sets

ONE SIZE

1018385

263.58

25+32/68 40+50+63/140 75/175 90/175 110/200

1048697 1048699 1048700 1048701 1048702

1 1 1 1 1

256.97 256.97 301.39 342.63 311.96

Uponor Training academy Underfloor Heating Systems • Systems available for screed, timbersuspended and floating floor applications. • Complete water temperature controls offered to efficiently regulate the system. • Bespoke quoting and design service available. • Underfloor heating systems offer a comfortable heating profile, no ‘hot heads or cold feet’.

Comprehensive installer, design and control courses available at the Uponor Training academy. • UFH Installer Course • Plumbing Applications Course

NEWE

S COUR

• Design Considerations & Controls • Controls Wiring Course

Y TRAINING ACADEM

l EW SAS practica • Introducing N se ur Installer co training on UFH eals the day’ Tool D • Exclusive ‘on te packs • Uponor delega 31

One-Pack

Preparation

Laying Loops

Connections

Filling & Pressure

Controls

System Start Up

Underfloor Heating - Self attaching Systems Uponor Pipe and Accessories Order Code

Description

Self Attach. Heat/Sound Insulation Roll

Pack Qty

Price per/m² (£)

Order Code

Description

1007227

Price each (£)

Uponor Tape

NEW

Wide tape for sealed joining of SAS insulation roll or slab. Roll width: 50mm Roll Length: 66m

EPS 70 heat and sound insulation roll laminated with SAS hook and loop technology and preprinted grid for easy laying of pipes. 28dB Impact noise reduction. Thermal Resistance 0.75m²K/W. Rolls are 1m x 12m.

30-2

Pack Qty

7.72

Width 50mm x Length 66m

1000012

4.19

Uponor Tape Dispenser Self Attach. Heat Insulation Slab NEW

For taping of insulation sections and edges (roll or slab). For use with tape 1000012

EPS 100 insulation slab with increased compressive strength for higher loadings. Laminated with SAS hook and loop technology and pre-printed grid for easy laying of pipes. Thermal Resistance 0.75m²K/W. Bi-folded slabs are 1m x 2m.

1048807

PEX Self Attaching Pipe

9.52

1000142 Eurocone Compression adapter (PEX Pipe)

20.23

Made of plated brass 3/4” FT Eurocone thread for connection to 3/4” MT outlets of NV/LS/TM Manifolds.

NEW Polyethylene cross linked pipe with oxygen diffusion barrier spiralled with SAS hook and loop technology.

NEW

16x1.8mm

1057441

5.14

Compression Coupling 16x1.8mm SAS Coil 16x1.8mm SAS Coil

1047624 1047625

240m 640m

1.85 1.85 ¾”MTx ¾”MT

Uponor Spreader Bar with Pipe Leading Tool NEW Can be fitted between doorways so as to elevate SAS pipe from the ground during installation.

1007179 Uncoiler

Made of plated brass 3/4” MT x 3/4 “ MT for repair to damaged sections of SAS 16 x 1.8mm pipe.

1006641

3.73

Gloves Uponor gloves recommended for use when handling self attaching pipe.

30.98

NEW Suitable for both PEX and MLCP pipes. Includes coil retention arms and de-coiling eyelet.

1048675

2.79

PEX Pipe bend supports These should be used for all pipe and pipe-in-pipe bends. Use the correct bend support to match the outer diameter of the pipe or the conduit.

1058662 Mobile Uncoiler

177.63

NEW Suitable for both PEX and MLCP pipes. Includes coil retention arms and de-coiling eyelet.

1058663

Metal 15/16mm Plastic 15/16mm

1009004 1002038

1 1

1.59 each 1.59 each

Did you know... Visit our Uponor youtube channel to watch the latest Self Attaching System video. www.youtube.com/user/UponorUK Uponor Self Attaching System Challenge

209.78

Edging strip For use on solid screed floors as perimeter wall insulation, to reduce thermal bridging. Made of polyethylene with self adhesive backing and PE skirt providing tight seal between edge strip and insulation. Thermal resistance 0.22m2K/W. Supplied in 50m rolls, 150 x10mm HxD.

50m Roll

1000080

50m

1.16 (per/m) 37

Underfloor Heating - Screed Floor Systems Uponor Pipe and Accessories

Uponor Manifolds Order Code

Description

Pack Qty

Price per/m (£)

MLCP white, supplied in coils

1013463 1013377 1013378 1013559 1013371 1013380

50m 75m 100m 120m 200m 500m

1.85 1.85 1.85 1.85 1.85 1.85

PEX Pipe, supplied in coils (16mm) Diffusion-resistant PEX pipes, four-layer (PEX – adhesive agent – oxygen barrier – adhesive agent), for underfloor heating and cooling applications. Maximum operating pressure is 6 bar. Maximum operating 70°c.

16x1.8mm 16x1.8mm 16x1.8mm 16x1.8mm

1058856 1058857 1047622 1047623

Price each (£)

The Uponor TM Manifold includes Topmeters on the flow manifold for balancing and viewing circuit flow rates. Includes chrome plated flow and return headers pre-mounted on nickel plated manifold brackets with fill & drain points. Primary connections are 1” BSP and outlet connections are ¾” Eurocone. Designed for use with underfloor heating systems. Note: Thermal actuators & Eurocone compression adaptors are supplied separately.

80m 120m 240m 640m

1.23 1.23 1.23 1.23

1 loop extension set 2 loops 3 loops 4 loops 5 loops 6 loops 7 loops 8 loops 9 loops 10 loops 11 loops 12 loops

Bend supports are used where the underfloor heating PEX pipe is returning up from the floor towards the manifold. This creates a stable 90° bend making it easier for the installer to connect to the manifold.

1009004 1002038

1 1

1.59 each 1.59 each

1002197 1002201 1002202 1002203 1002204 1002205 1002206 1002207 1002208 1002198 1002199 1002200

1 1 1 1 1 1 1 1 1 1 1 1

79.20 108.07 149.75 185.75 222.43 257.92 295.67 332.93 368.88 405.05 440.95 480.39

Compact Control Pack V4 Designed for the control of the water temperature and the flow rates in underfloor heating systems, floor areas up to 160m² and a maximum 14kW heat load. The pack is designed to bolt onto the Uponor TM Manifold. Incorporates a high limit protection function preset to 60°C, a two port thermostatic injection valve, an UFH pump and a balancing valve. IMPORTANT: Please read announcement on pg 46 with regard to the new EUP directive for pumps.

PEX Pipe bend supports

Metal 16mm Plastic 16mm

Pack Qty

Uponor TM Manifold

100% diffusion-resistant multi-layer composite (MLCP) pipe, five-layer (PE-RT – adhesive agent – continuously safety welded aluminium – adhesive agent – PE-RT). Manufactured to the strictest European standards and fully WRAS approved.

16x2mm 16x2mm 16x2mm 16x2mm 16x2mm 16x2mm

Order Code

Description

230v

1002287

419.28

Uponor Heating Control Pack The pack is made up of the Uponor TM Manifold with a Compact Control Pack V4 prefixed to the manifold. The unit is ready to be wall mounted straight from the box. For supplying UFH systems with floor areas up to 160m² and a maximum 14kW heat load. IMPORTANT: Please read pg 46 with regard to the new EUP directive for pumps.

2-Port 3-Port 4-Port 5-Port 6-Port 7-Port 8-Port

1002288 1002289 1002290 1002291 1002292 1002293 1002294

1 1 1 1 1 1 1

Description

Order Code

Pack Qty

522.69 584.19 600.25 636.86 672.30 710.08 747.18

Uponor Manifold Accessories Order Code

Description

Pack Qty

Price each (£)

Thermal Actuator

Eurocone Compression adaptors (MLCP) With open/closed indicator, suitable for use with Uponor underfloor heating manifolds.

Made of plated brass ¾”FT Eurocone thread for connection to ¾”MT outlets of NV/LS/TM Manifolds.

16x¾”FT 24V for TM/LS Manifolds 230V for TM/LS Manifolds

1002053 1013006

1 1

27.66 27.66

Uponor Manifold isolation valves for use with TM/ LS/NV range.

1059132

11.99

1058090

3.29

Eurocone Compression adaptors (PEX Pipe) Made of plated brass ¾”FT Eurocone thread for connection to ¾”MT outlets of NV/LS/TM Manifolds.

Uponor 1” Ball Valve

Price each (£)

16x¾”FT

1057441

5.14

Underfloor Heating - Screed Floor Systems Uponor Panels, Insulation, Positioning Plates, Clamp Track and Accessories Order Code

Description

Pack Qty

Price per/m² (£)

Edging strip

Order Code

Description

Pack Qty

Price each (£)

Fastening Nail for Clamp Track Used to hold Clamp Track 16-20 in position or to provide additional fixing where required. Length 65mm.

For use on solid screed floors as perimeter wall insulation, to reduce thermal bridging. Made of polyethylene with self adhesive backing and PE skirt providing tight seal between edge strip and insulation. Thermal resistance 0.22m2K/W. Supplied in 50m rolls, 150 x10mm HxD.

50m Roll

1000080

50m

1.16 (per/m)

1005291

500

0.08

Kombi Klip short Used for fixing 16-20mm underfloor heating pipe to Rolltec insulation or equivalent. The barb length is 22mm and requires a minimum of 26mm insulation depth. For use with Uponor Kombi gun 1002295.

Rolltec Expanded polystyrene, laminated with a highly resistant fibre woven film, with pipe fixing grid pattern, for ease of pipe installation. Dimensions are 1000 x 2000mm.

16-20mm

1002296

1000

0.08

Kombi Klip long 50mm (1.52m2K/W)

1002046

8m²

14.73

Used for fixing 16-20mm underfloor heating pipe to most types of insulation. The barb length is 33mm and requires a minimum of 35mm insulation depth. For use with Uponor Kombi gun 1002295.

Multi-foil Multi-layer reflective/printed insulating foil with pointed grid pattern. Designed for use directly above standard floor grade insulation to provide a protective layer and improve heat insulation and distribution into a heated screed. Supplied in 60 x 1m rolls. Thermal resistance 0.09m2K/W.

4mm

1000017

60m²

16-20mm

1002297

300

0.14

U-Clip 25 Suitable for holding 25mm conduit in position. Length 55mm.

4.59

Pipe positioning plate 16 Castellated pipe positioning plate, designed to simplify the installation of 16mm underfloor heating pipes. For installation over suitable floor grade insulation. Dimensions of each panel 1447 x 900 x 18mm LxWxH of mould. Each pack covers 9.6m².

16mm

1016703 10m²

Self-adhesive universal clip rail made of PPC, for Uponor pipe, 16mm to 20mm. Can be combined in any length, suitable for cutting to size. May be used with U-Clips 010619 for a more secure fastening to your insulation. Allow 1m/1m2. Length of track: 1m. Width of track: approx. 50mm. Space between pipe holders: 50mm.

1000018 100m

2.84 (price/m)

Clamp Track 16

100

0.24

Clip for diagonal installation Diagonal clip designed to hold 16-20mm OD pipe diagonally, for use with Pipe Positioning plate 1016703.

Clip

1000022

100

0.27

Joint protection tube Made of PE-LD, with slit opening, for protection of tubes in area of screed floor joint. Diameter: 23mm Length: 400mm Colour: black

400mm

1013130

1.08

Kombi Gun Self-adhesive U-profile strip made of recycled material, with integrated pipe holder for 16mm MLCP and PEX. May be used with U-Clip 100810 for a more secure fastening to your insulation. Allow 1m/1m2. Length of track: 2m. Width of track: approx. 40mm Space between pipe holders: 25mm.

16mm

1002018

8.96

Clamp Track 16 –20

16-20mm

55mm

1013127 100m

2.33 (price/m)

For all Uponor pipe from 16mm to 20mm (multi-layer composite pipe and cross-linked polyethylene pipe) to all common UK underfloor heating insulation boards. For use with Kombi Klips 1002296 and 1002297.

1002295

104.63

Underfloor Heating - Timber Floor Systems Uponor Pipe and Accessories

Uponor Manifolds Order Code

Description

Pack Qty

Price per/m (£)

MLCP white, supplied in coils

Order Code

Description

Pack Qty

Price each (£)

Uponor TM Manifold The Uponor TM Manifold includes Topmeters on the flow manifold for balancing and viewing circuit flow rates. Includes chrome plated flow and return headers pre-mounted on nickel plated manifold brackets with fill & drain points. Primary connections are 1” BSP and outlet connections are ¾” Eurocone. Designed for use with underfloor heating systems. Note: Thermal actuators & Eurocone compression adaptors are supplied separately.

16x2mm 16x2mm 16x2mm 16x2mm 16x2mm 16x2mm

1013463 1013377 1013378 1013559 1013371 1013380

50m 75m 100m 120m 200m 500m

1.85 1.85 1.85 1.85 1.85 1.85

16x1.8mm 16x1.8mm 16x1.8mm 16x1.8mm

1058856 1058857 1047622 1047623

80m 120m 240m 640m

1.23 1.23 1.23 1.23

1 loop extension set 2 loops 3 loops 4 loops 5 loops 6 loops 7 loops 8 loops 9 loops 10 loops 11 loops 12 loops

Metal 16mm Plastic 16mm

1009004 1002038

1 1

1.59 each 1.59 each

1 1 1 1 1 1 1 1 1 1 1 1

79.20 108.07 149.75 185.75 222.43 257.92 295.67 332.93 368.88 405.05 440.95 480.39

PEX Pipe bend supports Bend supports are used where the underfloor heating PEX pipe is returning up from the floor towards the manifold. This creates a stable 90° bend making it easier for the installer to connect to the manifold.

1002197 1002201 1002202 1002203 1002204 1002205 1002206 1002207 1002208 1002198 1002199 1002200

230v

1002287

419.28

2-Port 3-Port 4-Port 5-Port 6-Port 7-Port 8-Port

Compact Control Pack V4 12mm 16mm 20mm 16mm PEX PEX PEX MLCP Compact Control Pack V4

Controls the flow and temperature of water, in systems with up to 160m² of active floor area. Bolt together kit, which has been designed to fit neatly onto the UPONOR range of TM/LS/NV manifolds. The pack includes flow & return fittings for either MLCP or copper primary flow and return connections. The thermostatic valve has a control head with a temperature adjustment range of 35 to 60oC. Compact Control Pack V4 is available pre-assembled to the Uponor TM Manifold. 40

1002288 1002289 1002290 1002291 1002292 1002293 1002294

1 1 1 1 1 1 1

522.69 584.19 600.25 636.86 672.30 710.08 747.18

Underfloor Heating - Timber Floor Systems Uponor Manifold Accessories Description

Order Code

Pack Qty

Price each (£)

Thermal Actuator

Description

Order Code

Pack Qty

Price each (£)

Eurocone Compression adaptors (MLCP) With open/closed indicator, suitable for use with Uponor underfloor heating manifolds with 24V wired and radio room controls.

Made of plated brass ¾”FT Eurocone thread for connection to ¾”MT outlets of NV/LS/TM Manifolds.

16x¾”FT 24V for TM/LS Manifolds 230V for TM/LS Manifolds

1002053 1013006

1 1

27.66 27.66

1059132

3.29

Eurocone Compression adaptors (PEX Pipe) Made of plated brass ¾”FT Eurocone thread for connection to ¾”MT outlets of NV/LS/TM Manifolds.

Uponor 1” Ball Valve Uponor Manifold isolation valves for use with TM/ LS/NV range.

1058090

16x¾”FT

1057441

Order Code

Pack Qty

5.14

11.99

Uponor Panels, Insulation, Positioning Plates and Accessories Description

Order Code

Pack Qty

Price each (£)

Double heat emission plate

Price each (£)

Unifoil Clip For use with timber suspended floors, with joists at 400mm centres, or floating floor panels 150102. Double track for Uponor 16mm pipe at 200mm c/c. Plate dimension 1150 x 380mm. Each pack of 28 plates covers 15m2 (based on 80% floor coverage).

U 16 HEP400

Description

1034365

For use in conjunction with Unifoil system 1002070. Fits over joists (2”) and holds the pipe over the Unifoil at 200mm c/c. Allow 5 clips/m2.

Unifoil Clip

1002071

100

0.94

9.17

Unifoil Aluminium foil insulation roll, combines insulation with reflective qualities for intermediate timber suspended floor applications. Lightweight, waterproof and corrosion resistant. For use in conjunction with Unifoil Clip 1002071. Thermal resistance 1.45m2K/W (including 50mm air space). Each 25 x 1.2m roll covers 20m2, with 50mm joists at 400mm centres. Not suitable for floor applications with ventilated voids.

4.5mmx1.2mx25m

1002070

30m²

5.70 (per/m2)

Timber Suspended Floor - Floor Construction Heat Emission Plates benefits: Can be laid directly on to existing traditional joists Direct contact between plate and floor covering provides an efficient and highly responsive method of heat transfer Options available for different joist pitches and sprung floor systems

Underfloor Heating - Floating Floor Systems Uponor Pipe and Accessories

Uponor Manifolds Order Code

Description

Pack Qty

Price per/m

MLCP white, supplied in coils

Order Code

Description

Pack Qty

Price each (£)

16x2mm 16x2mm 16x2mm 16x2mm 16x2mm 16x2mm

1013463 1013377 1013378 1013559 1013371 1013380

50m 75m 100m 120m 200m 500m

1.85 1.85 1.85 1.85 1.85 1.85

16x1.8mm 16x1.8mm 16x1.8mm 16x1.8mm

1058856 1058857 1047622 1047623

1.23 1.23 1.23 1.23

80m 120m 240m 640m

1 loop extension set 2 loops 3 loops 4 loops 5 loops 6 loops 7 loops 8 loops 9 loops 10 loops 11 loops 12 loops

Metal 16mm Plastic 16mm

1009004 1002038

1 1

1.59 each 1.59 each

1 1 1 1 1 1 1 1 1 1 1 1

79.20 108.07 149.75 185.75 222.43 257.92 295.67 332.93 368.88 405.05 440.95 480.39

1002197 1002201 1002202 1002203 1002204 1002205 1002206 1002207 1002208 1002198 1002199 1002200

230v

1002287

419.28

2-Port 3-Port 4-Port 5-Port 6-Port 7-Port 8-Port

1002288 1002289 1002290 1002291 1002292 1002293 1002294

1 1 1 1 1 1 1

522.69 584.19 600.25 636.86 672.30 710.08 747.18

Uponor Heating Control Pack

Heating Control Pack

12mm 16mm 20mm 16mm PEX PEX PEX MLCP ü

ü Boiler Returns

Pre-assembled to the Uponor TM Manifold

UFH Flow

Ready to be wall mounted straight from the box

Pump Flow

High limit protection UFH pump and balancing valve Boiler Flow UFH Returns

Underfloor Heating - Floating Floor Systems Uponor Manifold Accessories Order Code

Description

Pack Qty

Price each (£)

Thermal Actuator

Description

Order Code

Pack Qty

Price each (£)

Eurocone Compression adaptors (MLCP) Made of plated brass ¾”FT Eurocone thread for connection to ¾”MT outlets of NV/LS/TM Manifolds.

With open/closed indicator, suitable for use with Uponor underfloor heating manifolds with 24V wired and radio room controls.

16x¾”FT 24V for TM/LS Manifolds 230V for TM/LS Manifolds

1002053 1013006

1 1

27.66 27.66

1059132

3.29

Eurocone Compression adaptors (PEX Pipe) Made of plated brass ¾”FT Eurocone thread for connection to ¾”MT outlets of NV/LS/TM Manifolds.

Uponor 1” Ball Valve Uponor Manifold isolation valves for use with TM/ LS/NV range.

1058090

16x¾”FT

1057441

5.14

11.99

Uponor Panels and Heat Emission Plates - 16mm Order Code

Description

Pack Qty

Price each (£)

Floating floor panel Grooved polystyrene insulation panel for 16mm underfloor heating pipes at 200mm c/c. Panel dimensions 1200 x 1200 x 50mm LxWxH. Used together with Double Heat Emission Plate 150101. Thermal resistance 1.52m2K/W. Each pack covers 8.64m2.

1.2x1.2x50mm

1002052

21.04

Double heat emission plate For use with timber suspended floors, with joists at 400mm centres, or floating floor panels 150102. Double track for Uponor 16mm pipe at 200mm c/c. Plate dimension 1150 x 380mm. Each pack of 28 plates covers 15m2 (based on 80% floor coverage).

U 16 HEP400

1034365

9.17

Uponor Heating Control Pack Can be laid directly on to an existing floor Expanded Polystyrene provides thermal insulation and improved performance Can be easily adapted to suit different size and shaped rooms Boards can be routed with ease so as to accommodate additional pipe grooves and channels.

Underfloor Heating- Floating Floor Systems - System 12 Uponor 12 UFH System Components Order Code

Description

Pack Qty

Price per/m (£)

PEX pipe, supplied in coils (12mm)

12x2.0mm 12x2.0mm 12x2.0mm

1033889 1033883 1033891

50m 100m 400m

1.47 1.47 1.47

Description

Order Code

Pack Qty

Price each (£)

Uponor 12 Floating Panel (single) Grooved polystyrene panel complete with heat emission plates glued to the top surface. Grooves c/c 125mm. Heat emission plates can be snapped off at end to reveal turns and two straight run grooves for feed/return. Allow approx.1.2 pcs/m2.

1034338

31.05

Uponor 12 Floating Panel (feed/return)

1034340

310ml

12mm

2.05

12x¾”Eurocone

50.49

Uponor 12 Fixed Panel (turn) 13mm plywood panel with multiple grooved turns to take 12mm pipe at c/c 175mm. Coverage approx. 1.21m2.

1225 x 170 x 13mm

1002024

9.44

Uponor 12 Fixed Panel (feed and turn) 13mm plywood panel with multiple grooved turns and six straight run grooves for feed/return. Complete with 1 off tree piece to allow entry/exit of loops.

1225 x 300 x 13mm

1002023

1.04

1002051

4.47

Designed to fit directly onto an existing radiator circuit, offering control of both water and room temperature, and flow rate to a single loop of underfloor heating pipe. Serves up to 15m2 of floor area. Where electronic on-off control is required order a Push 12 actuator. Additional Eurocone ¾” compression adaptors (2) are required for connection of UFH loop, depending on which pipe is used.

Push 12 230V actuator

18.95

1009148 1013006

1 1

405.54 27.66

Push 12 Pipe Adaptor (PEX) R20 x 12 x 2mm pipe adaptor for direct connection of Uponor 12mm PEX pipe onto the Push 12 water temperature control/pump unit.

12x¾”FT

1034500

5.20

Thermal Actuator With open/closed indicator, suitable for use with Uponor underfloor heating manifolds with 24V wired and radio room controls.

7.42

As per Uponor 12 Fixed Panel (single), although pre-assembled in groups of 6 and staggered. Assembled panel coverage approx.1.33m2.

1002022

Made of plated brass ¾”FT Eurocone thread for connection to ¾”MT outlets of NV/LS/TM Manifolds.

Uponor 12 Fixed Panels (multi)

1265 x 1050 x 13mm

1033974

Eurocone Compression adaptors (PEX Pipe)

3.49

13mm plywood panel bonded to an aluminium heat transfer plate with single groove c/c 175mm designed to take 12mm pipe. Allow approx. 4.7pcs/m2.

1002021

8.67

These should be used for all pipe and pipe-in-pipe bends. Use the correct bend support to match the outer diameter of the pipe or of the conduit.

Uponor 12 Fixed Panel (single)

1215 x 175 x 13mm

Push 12 Water Temperature Control

Aluminium metal plates for use with Uponor 12 Floating feed/return panels. Single track for Uponor 12mm pipe.

1034358

1002020

PEX Pipe bend supports (Metal)

Uponor 12 Heat Emission Plate (HEP12)

1180 x 110mm

Price each (£)

Tube of silicone heat transfer paste and adhesive for use with the Fixed Panel system. One tube coverage approx. 5m2.

Grooved polystyrene panel for use where multiple feed pipes run to/from the manifold to the heated area. Grooves c/c 62.5mm.

1200 x 250 x 15mm

Pack Qty

Uponor 12 Silicone

Wirsbo-evalPEX pipe, cross-linked polyethylene with oxygen diffusion barrier (to DIN4726) for use in underfloor heating applications. Allow 8m of pipe per m2 for the Floating Panel system, and 6m of pipe per m2 for the Fixed Panel system.

1200 x 750 x 15mm

Order Code

Description

24V for TM/LS Manifolds 230V for TM/LS Manifolds

1002053 1013006

1 1

27.66 27.66

PEX20 Commercial Underfloor Heating • More eﬃcient pipe coverage • Requires less manifolds • 50 year design life. • Over 30 years of service within the UK • Only PEX pipe to have been real time tested for over 30 years • Highly flexible PEX A for a fast and easy installation

Underfloor Heating - PEX 20 Systems PEX 20 Underfloor Heating, Panels Order Code

Description

Pack Qty

Price per/m (€) (£)

PEX Pipe, supplied in coils (20mm)

Description

Old Code

1009229 1033239 1034538 1009228 1009230 1009231

60m 80m 100m 120m 240m 480m

Order Code

Pack Qty

2.05 2.05 2.05 2.05 2.05 2.05 Price each (£)

Metal 20mm Plastic 20mm

1009233 1002039

1 1

2.34 2.15

1 loop extension set 2 loops 3 loops 4 loops 5 loops 6 loops 7 loops 8 loops 9 loops 10 loops 11 loops 12 loops

1002053 1013006

1 1

27.66 27.66

Eurocone Compression adaptors (PEX Pipe) Made from plated DZR brass. ¾”FT eurocone thread for connection to ¾”MT outlet ports of TM/LS Manifold.

1057442

3.83

Compression coupling Made from DZR brass. May be used with Eurocone compression adaptors for PEX pipe (¾”FT) to repair damaged sections of pipe.

¾”

1006641

3.73

1 1 1 1 1 1 1 1 1 1 1 1

79.20 108.07 149.75 185.75 222.43 257.92 295.67 332.93 368.88 405.05 440.95 480.39

The Uponor LS Manifold includes lock shield valves on the flow manifold for balancing the system. The manifold includes chrome plated flow and return headers premounted on nickel plated brackets with fill & drain points. Primary connections are 1” BSP and outlet connections are ¾” Eurocone. Note: Thermal actuators & Eurocone compression adaptors are supplied separately.

1 port extension set 2 port 3 port 4 port 5 port 6 port 7 port 8 port 9 port 10 port 11 port 12 port

1002181 1002182 1002183 1002184 1002185 1002186 1002187 1002188 1048274 1048275 1048276 1048277

1 1 1 1 1 1 1 1 1 1 1 1

86.75 102.84 138.34 169.55 201.51 232.24 265.33 297.75 328.16 357.71 387.40 417.74

Automatic Manifold By-Pass

Manifold cabinet

Preset to 0.25 bar> For connection between flow and return manifold (TM/LS). Complete with isolation valve for filling purposes.

Height 850mm. Depth 100mm. Delivered with lockable front door (not shown).

2-6 loops width 550mm 6-12 loops width 850mm

1034377 1009188

1 1

200.83 234.12

584990

50mm (1.52m2K/W) 2

28.28

11.99

1002046

8m²

14.73

Multi-layer reflective/printed insulating foil with pointed grid pattern. Designed for use directly above standard floor grade insulation to provide a protective layer and improve heat insulation and distribution into a heated screed. Supplied in 60 x 1m rolls. Thermal resistance 0.09m2K/W.

Uponor Manifold isolation valves for use with TM/ LS/NV range.

59.72

Multi-foil

Uponor 1” Ball Valve

1059132

Expanded polystyrene, laminated with a highly resistant fibre woven film, with pipe fixing grid pattern, for ease of pipe installation. Rolls are 1000 x 2000mm.

For connection to LS/TM Manifold. Can be fitted to left or right hand side of manifold.

1046886

1048278

Rolltec

Manifold Connection Fitting with Thermometer and Airvent

1002197 1002201 1002202 1002203 1002204 1002205 1002206 1002207 1002208 1002198 1002199 1002200

LS Manifold

With open/closed indicator, suitable for use with Uponor underfloor heating manifolds with 24V wired and radio room controls.

20x¾”FT - TM manifold

Price each (£)

The Uponor TM Manifold includes Topmeters on the flow manifold for balancing and viewing circuit flow rates. Includes chrome plated flow and return headers pre-mounted on nickel plated manifold brackets with fill & drain points. Primary connections are 1” BSP and outlet connections are ¾” Eurocone. Note: Thermal actuators & Eurocone compression adaptors are supplied separately.

Thermal Actuator

24V for TM/LS Manifolds 230V for TM/LS Manifold

Pack Qty

Uponor TM Manifold

PEX Q&E 20 x 2mm underfloor heating pipe. Five layer cross-linked polyethylene barrier pipe, manufactured in accordance with DIN 16892 and DIN 4726. Maximum operating pressure of 6 bar at 95oC.

20x2mm 20x2mm 20x2mm 20x2mm 20x2mm 20x2mm

Order Code

Description

4mm

1000017

60m²

4.59

Underfloor Heating - PEX 20 Systems Uponor Panels, Insulation, Heat Emission Plates and Positioning Panels & Accessories Order Code

Description

Pack Qty

Price per/m² (£)

Floating floor panel

Order Code

Description

Pack Qty

Price each (£)

Joint protection tube Grooved polystyrene insulation panel for PEX20 underfloor heating pipes at 300mm c/c. Panel dimensions 1200 x 790mm, available in two thicknesses 30 & 50. Used together with HEP300 heat emission plate 1009132. Allow 1.2 pieces/m2.

30mm 1.2mx0.79m 50mm 1.2mx0.79m

1034347 1034352

5 3

13.94 19.07

Made of PE-LD, with slit opening, for protection of tubes in area of screed floor joint. Diameter: 23mm Length: 400mm Colour: black

400mm

(price each) 1.08

Fastening Nail for Clamp Track

Heat emission plate HEP300

Used to hold Clamp Track 16-20 in position or to provide addition fixing where required. Length 65mm.

For use with timber suspended floors, with joists at 300mm centres or floating floor panels. Single track for Uponor PEX20 pipe at 300mm c/c. Plate dimensions 1150 x 280mm. Each pack of 40 plates covers 16m2 (based on 80% floor coverage).

W20 HEP300

1013130

1009132

6.94

1005291 Clip

500

0.08

Diagonal clip designed to hold 16-20mm OD pipe diagonally, for use with Pipe Positioning plate 1000020.

Heat emission plate HEP411 For Junckers sprung floor battens spaced at 411mm centres. Double track for Uponor PEX20 pipe at 200mm c/c. Plate dimension 1150 x 405mm. Each pack of 20 plates covers 12.3m2 (based on 80% floor coverage).

W20 HEP411

1034491

For use with timber suspended floors, with joists at 400mm centres. Double track for Uponor PEX20 pipe at 200mm c/c. Plate dimension 1150 x 380mm. Each pack of 20 plates covers 11m2 (based on 80% floor coverage).

1034492

1000022

16-20mm

1002296

50m Roll

1000080

50m

1002297

14-20mm

1000018

100m

1002018

0.24

Kombi Gun For all Uponor pipe from 16mm to 20mm (multi-layer composite pipe and cross-linked polyethylene pipe) to all common UK underfloor heating insulation boards. For use with Kombi Klips 1002296 and 1002297.

1002295 Uncoiler

104.63

NEW Suitable for both PEX and MLCP pipes. Includes coil retention arms and de-coiling eyelet.

1058662

100pcs 100pcs

100

(price/m) 2.84

For Uponor PEX pipe 20 x 2mm. Length 600mm. Clips at c/c 150mm. Clip rails snap together to form longer lengths. Delivered in bundles of 10 x 10 pieces clipped together. Allow 1-2 pcs/m2. Available with or without barb hooks. May be used with U-Clip 1002019. Please note : a pack is 100m.

1009135 1034371

0.14

Suitable for holding 25mm conduit in position. Length 55mm.

Clamp Track 20

Without hooks With hooks

300

U-Clip 25

Clamp Track 16 –20 Self-adhesive universal clip rail made of PPC, for Uponor pipe, 16mm to 20mm. Can be combined in any length, suitable for cutting to size. May be used with U-Clips 1002019 for a more secure fastening to your insulation. Allow 1m/1m2. Length of track: 1m Width of track: approx. 50mm Space between pipe holders: 50mm

0.08

Used for fixing 16-20mm underfloor heating pipe to most types of insulation. The barb length is 33mm and requires a minimum of 35mm insulation depth. For use with Uponor Kombi gun 1002295.

55mm (per/m) 1.16

1000

Kombi Klip long

16-20mm For use on solid screed floors as perimeter wall insulation, to reduce thermal bridging. Made of polyethylene with self adhesive backing and PE skirt providing tight seal between edge strip and insulation. Thermal resistance 0.22m2K/W. Supplied in 50m rolls, 150 x10mm HxD.

0.27

Used for fixing 16-20mm underfloor heating pipe to Rolltec insulation or equivalent. The barb length is 22mm and requires a minimum of 26mm insulation depth. For use with Uponor Kombi gun 1002295.

9.55

Edging strip

100

Kombi Klip short

12.09

W20 - Heat emission plate 400mm

W20 HEP400

Clip

(price/m) 1.32 1.24

177.63

Mobile Uncoiler NEW Suitable for both PEX and MLCP pipes. Includes coil retention arms and de-coiling eyelet.

1058663

209.78 47

Underfloor Heating & Cooling Systems - Controls Uponor Water Temperature Controls Order Code

Description

Pack Qty

Price each (£)

Compact Control Pack V4

1002287

419.28

Uponor Heating Control Pack

1002288 1002289 1002290 1002291 1002292 1002293 1002294

1 1 1 1 1 1 1

522.69 584.19 600.25 636.86 672.30 710.08 747.18

Designed for control of both water temperature and flow rates in secondary underfloor heating systems, in both domestic and commercial applications. The range of 3 sets are preassembled and telescopic to fit directly onto all Uponor UFH manifolds. Both the Midi & Maxi sets require a UNIset Motor. IMPORTANT: Please read announcement on pg 46 with regard to the new EUP directive for pumps.

1002353 1002354 1002355

1 1 1

507.19 631.78 709.00

Climate Controller Extended Features Radio humidity sensor and Radio controller antenna so as to enable dew point monitoring for radiant cooling. Heating and cooling

1047845

1048762

1048764

20.47

Radio Controller Antenna Enables communication between the Climate Controller and radio sensors. Please note that the Radio Antenna does not need to be fitted when using in conjunction with the Radio Zone Controller.

1046116

91.02

Radio Humidity Sensor

1002013 1002014 1002015 1002016 1002017

1 1 1 1 1

78.22 78.22 85.17 93.51 101.77

Radio humidity sensor used for dew point calculation so as to prevent condensation occurring in cooling mode.

1047846

IMPORTANT: From the 1st January 2013 Uponor pump groups will incorporate an A rated energy efficient circulator. This complies with the mandatory EU regulations. Therefore from the 1st January 2013 all Uponor pump groups are subject to price amendments.

123.46

Push 12 Water Temperature Control Designed to fit directly onto an existing radiator circuit, offering control of both water and room temperature, and flow rate to a single loop of underfloor heating pipe. Serves up to 15m2 of floor area. Where electronic on-off control is required order a Push 12 actuator. Additional Eurocone ¾” compression adaptors (2) are required for connection of UFH loop, depending on which pipe is used.

Push 12 230V actuator

20.47

230V/24V transformer for use with Actuator 1002356 and C-46 Controller.

Made from DZR brass. Rotary shoe valve used to blend the system water to the required temperature.

¾“r Kv4 ¾“s Kv6.3 1“r Kv8 1“s Kv12 1¼ “s Kv18

Plug Transformer Power Supply

201.21

3-Port mixing valve

698.28

24v transformer for use with Actuator 1002356 and Climate Controller.

For motorised water temperature control when used with the Climate Controller. To be used in conjunction with either 1048762 or 1048764 24v transformer.

1002356

Cable Transformer Power Supply

Actuator 24V with 0-10V Signal

24V

508.73

1047844 1

UNIset Water Temperature Control Sets

Mini Midi Maxi

Price each (£)

Weather compensated or set point water temperature controller for radiant heating and cooling systems. Features an installtion wizard for a fast and easy setup. Can also communicate with the Radio Zone controller in an integrated and intelligent way via its bus connection.

The pack is made up of the Uponor TM Manifold with a Compact Control Pack V4 prefixed to the manifold. The unit is ready to be wall mounted straight from the box. For supplying UFH systems with floor areas up to 160m² and a maximum 14kW heat load. IMPORTANT: Please read announcement on pg 46 with regard to the new EUP directive for pumps.

2-Port 3-Port 4-Port 5-Port 6-Port 7-Port 8-Port

Pack Qty

Climate Controller

Designed for the control of the water temperature and the flow rates in underfloor heating systems, floor areas up to 160m² and a maximum 14kW heat load. The pack is designed to bolt onto the Uponor TM Manifold. Incorporates a high limit protection function preset to 60°C, a two port thermostatic injection valve, an UFH pump and a balancing valve. IMPORTANT: Please read announcement on pg 46 with regard to the new EUP directive for pumps.

230v

Order Code

Description

1009148 1013006

Did you know... That the Climate Controller can operate as either an underfloor heating or cooling controller.

1 1

405.54 27.66

Underfloor Heating Systems - Controls Uponor Room Controls - Radio Order Code

Description

Pack Qty

Price each (£)

Radio Zone Controller and Interface

Order Code

Description

Pack Qty

Price each (£)

Radio Dial Thermostat

NEW! Featuring Dynamic Energy Management - up to 12% energy saving! Comes complete with 12- channel radio controller, interface unit, external antenna, cables for connections and mounting material.

1045564

396.29

The dial thermostat is an easy-to-use radio thermostat that incorporates conventional thumb wheel control to adjust the room temperature set point. 2x AAA batteries included.

White

1058385

47.88

Radio Zone Controller NEW! Featuring Dynamic Energy Management - up to 12% energy saving! Designed for receiving and interpreting radio signals from a maximum of 12 radio thermostats. In built 23024V transformer, two relays and can control up to 14 x 24V actuators. Time controlled setback is available via the Radio Zone Interface Controller (1046083).

1045567

385.46

Radio Public Thermostat This is a tamper proof thermostat designed for public areas or for user/occupant restriction purposes. It can also be used as a Radio outdoor sensor for the Climate Controller. Can also be connected to a floor sensor ( 1000538 ).

White

1045572

68.79

Radio Zone Interface Controller NEW! Featuring Dynamic Energy Management - up to 12% energy saving! The Interface can be used to control a maximum of three Radio Zone Controllers (1045567). The unit offers 5 temperature setback programs and comes complete with cable for connection to the Controller. Features include holiday mode, assignment of room names, display of all setpoint and actual room temperatures and valve and pump exercise functions.

1046083

Individual radio room control with

Dynamic Energy

Management

198.66

Radio Controller Remote Access Module Allows remote access to switch between Eco or Comfort settings. Very useful for holiday homes. Gives updates; indoor temperature and outdoor temperature - requires a Radio Public Thermostat (1045572) Note: will require a SIM card, not provided.

1046485

647.90

Auto-Balance

Radio Digital Thermostat Push button operation for temperature control from +5°C to +35°C. Allows the user to view the current ambient temperature or the set point temperature via the LCD display. Two standard AAA batteries are included.

White Silver Grey

1000502 1000504 1046114

1 1 1

61.82 78.23 68.15

Supply Diagnostics Room Check Room By-Pass Remote User Access www.youtube.com/user/UponorUK Dynamic Energy Management (DEM) Controls - Virtual City.wmv

Mounting Kit for Radio Digital Thermostat Table stand and wallplate with adhesive sticker for sticking to smooth surfaces.

Comfort setting

Room bypass

Mounting Kit - White Mounting Kit - Silver Mounting Kit - Grey

1000503 1000505 1046115

1 1 1

4.39 11.92 5.86 Supply analysis

Did you know... Did you know the Radio Zone Controller can be connected to the Climate Controller via BUS communication. This enables 2 way communication allowing shared use of sensors and thermostats for improved performance.

Room-check-function

SMS-coupler

Heating Systems - Controls Uponor Room Controls - 12V Wired Order Code

Description

Pack Qty

Price each (£)

Order Code

Description

Price each (£)

Wired Dial Thermostat

Wired Zone Controller

Easy-to-use thermostat that incorporates conventional thumb wheel control to adjust the air temperature set point. The setting range can be limited mechanically by adjusting pins under the thermostat dial. A floor sensor can be wired to the thermostat which will give the it the ability to control the minimum or maximum floor temperature (1000538).

Wiring and relay centre for controlling of up to 14 x 24V actuators via a maximum of 12 wired thermostats. The unit has an in-built 230-24V transformer with two relays. For time controlled setback the Wired Timer should be used.

230/24V

1000534

135.54 White

Wired Controller Timer The Wired Timer offers two timed setback programs . The unit has a large LCD screen with a simplified visual display of Comfort or ECO setting. Also has a facility for external forced ECO mode available via the remote access module (1046485).

1048013

1058387

1048011

1000537

27.04

Digital wired thermostat with large LCD screen and simple menu navigation. For time control use in conjunction with the Wired Timer (1048013). Also includes uponor’s world first “Auto-balance” patented technology (up to 12% energy saving!)

79.67

The thermostat dials are hidden by a cover which needs to be removed before adjustments can be made. The Public Thermostat also allows control over the minimum or maximum floor temperature when used with a floor sensor (1000538).

Wired Digital Thermostat

Wired Public Thermostat

White

Pack Qty

58.82

Wired Programmable Digital Thermostat Programmable digital thermostat with 5/2, 6/1 & 7 day groups for programming between ECO and COMF setting. Includes Uponor’s world first “Auto-balance” patented technology (up to 12% energy saving!)

27.04

1048012

Order Code

Pack Qty

65.35

Uponor Room Controls - Radio & 12V Wired Accessories Description

Order Code

Pack Qty

Price each (£)

Thermal Actuator

Description

Remote Floor Sensor Floor sensor attached to a 4m cable for use with the thermostats to enable control over the maximum or minimum floor temperature.

24V, with open/closed indicator, suitable for use with Uponor underfloor heating manifolds.

For TM/LS Manifolds

1002053

27.66

1000538

90 x 90mm

Set

22.13

For use with Radio/Wired dial and public thermostats to cover standard wall boxes.

15m twisted pairs cable to connect from the Interface to the controller, from one controller to another or to be used as an extension for the antenna cable.

Cable Kit

Thermostat Wall Plate

15m Installation Cable

Cable

Price each (£)

1000515

Spare part cable kit consisting of: • 3m Cable for connecting from the antenna to the Radio Zone Controller • 0.3m Cable for connecting from the antenna to Radio Zone Controller • 2m Cable for connecting from the Interface I-76 Radio Zone Controller

1000514

1000539

31.83

10.05

Did you know... Did you know that our 12v and Radio DEM controls can work in either heating or cooling mode. Ideal for both heating and cooling

2.14

Underfloor Heating Systems - Controls Uponor Controls - 12V STATPACKS

Digital Wired Thermostat White

1048011

Digital wired thermostat with large LCD screen and simple menu navigation. Also Includes Uponor’s world first “Auto-balance” patented technology (up to 12% energy saving!)

Wired Dial Thermostat White

1058387

Easy-to-use thermostat that incorporates conventional thumb wheel control to adjust the air temperature set point. The setting range can be limited mechanically by adjusting pins under the thermostat dial. A floor sensor can be wired to the thermostat which will give it the ability to control the minimum or maximum floor temperature.

Choose your pack... • Select the number of zones your heating system is controlling from column 1. • Column 2 and column 3 list the available thermostat combinations for each pack. Read across the table and select the combination required. • Column 4 and column 5 list the pack product code and pricing*. • Finally add the number of manifold actuators and 12V thermostat remote sensors to your chosen STATPACK. * note: Every pack includes a wiring centre for controlling up to 12 zones and 14 loops. Packs also contain an Wired Timer for setback temperature control. column 1

column 2

column 3

column 4

column 5

Zones

Dial Stat

Digital Stat

Pack Code

Pack Price List (£)

1057095

242.38

1057096

299.57

1057097

266.72

1057098

352.51

1057099

291.06

1057100

405.45

1057101

315.40

1057102

458.37

1057103

339.74

1057104

511.31

1057105

364.09

1057106

564.25

1057107

388.42

1057108

617.19

3 4

Uponor Room Controls - 230V Wired Controls & Accessories Order Code

Description

Pack Qty

Price each (£)

230V Wiring Centre

Order Code

Description

Pack Qty

Price each (£)

Motorised 2 port zone valve For controlling up to 8 room stats and 16 manifold actuators. Includes two volt free relays for pump and boiler control. Night setback facility when used with remote time clock.

White 230V

1047456

135.54

230V Digital Programmable Thermostat

22mm 2-Port

1002047

89.10

Single zone control pack

Modern slim design only 13mm depth after installation. Energy saving feature calculates heat up time of system. Includes holiday mode, temporary over-ride and specified duration, 5/2 or 7 day programme, floor temperature control, lock facility, status display on current thermostat mode.

White 230V

230V power open/spring return zone valve, complete with auxiliary switch.

1058425

62.90

Boxed zoned control pack comprising of programmable thermostat, 2 port zone valve and 12 way wiring box, offering time and temperature control to single zone underfloor heating systems.

Boxed Zoned Control Set

1002134

182.51

230V Digital Dial Thermostat Multi-purpose LCD and dial thermostat with remote sensor and setback facility. Includes, air and remote sensing or remote sensing only, regulation and protection of floor temperature, lock facility, status display on current thermostat mode.

White 230V

1047457

40.03

Remote Sensor Optional 3m long sensor for control and regulation of remote temperatures of remote temperature.

1047459

22.13

230V Thermal Actuators Controlled by the 230V wiring centre for loop and zone regulation. One required per manifold port/loop

230V Thermal Actuator, TM/LS Manifold

1013006

27.66

230V Programmable thermostat 5/2 day programmable thermostat with up to 6 time and temperature changes each day. Battery powered.

White

1002131

111.79

230V Time Clock 230V single channel time switch with volt free output. Used with the wiring centre to provide either 7 day, 24hr or 5/2 day temperature setback on the digital dial thermostat. Program copy and over-ride features included with a backlight display.

White

1002133

86.56

1002130

14.11

Junction box 12 way connector

White

Uponor’s 230V wired system is the latest addition to Uponor’s market leading and innovative range of room controls. The system oﬀers a high level of functionality and is suitable for a wide range of applications, from domestic housing to large commercial buildings.

Underfloor Heating Systems - Controls Uponor Controls - 230V STATPACKS

Choose your pack... • Select the number of zones your heating system is controlling from column 1. • Column 2 and column 3 list the available thermostat combinations for each pack. Read across the table and select the combination required. • Column 4 and column 5 list the pack product code and pricing*. • Finally add the number of manifold actuators and 230V thermostat remote sensors to your chosen 230V STATPACK. * Note: every pack includes a wiring centre for controlling up to 8 zones and 16 loops. Packs with Digital Dial thermostats also include a single channel time clock for timed setback temperature control.

column 1

column 2

column 3

column 4

column 5

Zones

Digital Dial Stat

Programmable Digital Stat

Pack Code

Pack Price

1047700

271.95

1047701

313.12

1047702

307.97

1047703

369.72

1047704

328.55

1047705

343.99

1047706

426.34

1047707

364.58

1047708

385.17

1047709

380.02

1047710

482.95

1047711

400.60

1047712

421.19

1047713

416.05

1047714

539.57

1047715

457.22

1047716

477.81

1047717

452.07

1047718

596.18

1047719

493.25

1047720

513.83

1047721

488.10

1047722

652.79

1047723

529.28

1047724

549.86

1047725

570.45

List (£)

Energy Systems • Collector pipes for geothermal renewable energy heat pump systems • Can be used in conjunction with all Uponor systems; pre-insulated, plumbing, underfloor heating and cooling • 50 year design life • Supports carbon footprint reduction

• Three diﬀerent methods of installation: - borehole - horizontal - lake • No special tools required • Suitable for city or rural projects, Uponor Energy Systems will bring outside natural energies inside your home

Energy Systems Energy Systems (Collector Pipe for GSHPs) Order Code

Description

Pack Qty

Price each (£)

Order Code

Description

Pack Qty

Price each (£)

5.44

Tubolit insulation DG 42/9

Return collector with return elbow attached

2 metres for 40mm pipe

PEM 40x2.4, 2x50m PEM 40x2.4, 2x80m PEM 40x2.4, 2x100m PEM 40x2.4, 2x150m PEM 40x2.4, 2x200m

1048230 1048231 1048232 1048233 1048234

1 1 1 1 1

214.45 343.11 428.88 643.33 857.77

1002162 Straight coupling MDPE Compression Fitting

40mm

Single collector for ground energy

1002138

31.05

1 1

18.31 18.31

1 1

33.90 37.31

16.38

43.49

31.10

1 1

16.65 18.31

23.17

Female thread adaptor MDPE Compression Fitting

40x2.4 100m 40x2.4 200m 40x2.4 250m 40x2.4 300m 40x2.4 400m 40x2.4 500m

1048224 1048225 1048227 1048226 1048228 1048229

1 1 1 1 1 1

209.29 418.59 523.24 627.88 837.18 1,046.47

40mm x1” 40mm x1¼”

1002146 1002147

Female thread take oﬀ tee MDPE Compression Fitting

All pipe available to order on lead-time, typically 2 weeks.

Order Code

Description

Pack Qty

Price each (£)

Rubber hood

40mmx1”x40mm 40mmx1¼”x40mm

1002143 1002368

End plug MDPE Compression Fitting

Pressure sealed 138-168mm

1002163

95.10

40mm Equal tee

Tee pipe with air bleeder

1002145 MDPE Compression Fitting

40mm with air bleeder

1002164

28.67

40mm

1002142

90O Elbow

Wall elbow

MDPE Compression Fitting 40mm. L = 1m

1002166

25.43

40mm

1002141

Male thread adaptor

Snap-in lid

MDPE Compression Fitting 315mm for inspection chamber

1002367

6.54

Return elbow With mounting ring for bottom weight or hauling rope. Pipe connection 40mm.

1002160

45.60

40mmx1” 40mmx1¼”

1002139 1002140

Female thread elbow MDPE Compression Fitting

40mmx1¼”

1002144

Collector spool

Round bottom weight For lowering the return collector into the bore hole> Ø 85mm x 0.5 long = 12kg Multiple weights can be used.

1002167

35.48

For dispensing coils of pipe on site.

1002137

690.30

Tools and accessories Uponor MLCP Tools Description

Order Code

Pack Qty

Net Price Each (£)

Description

Pack Qty

Net Price Each (£)

Inside bending spring

MLCP pliers Special pipe cutting pliers for Uponor MLCP with an outer diameter of 12-20mm; with corrugated tube cutting attachment.

Pipe cutting pliers 12-20mm Spare blades for cutting pliers

Order Code

1006636 1 1006637 1

29.36 4.88

Pipe cutter Pipe cutter for use with Uponor MLCP.

Bending spring for use with Uponor MLCP.

12mm 16mm 20mm 25mm 32mm

1013726 1013729 1013734 1013737 1013739

2.77 1.77 1.81 3.01 3.72

1 1 1 1 1

Outside bending spring Bending spring for use with Uponor MLCP.

Pipe cutter 14-32mm Spare cutting blade

1013719 1 1013721 1

20.33 8.17

Pipe cutting tool Cutting tool for use with Uponor MLCP.

16mm 20mm 25mm

2.47 2.21 3.04

1006640 1 1013792 1 1013794 1

Bending tool 16-32mm Pipe cutting tool 25-63mm Spare cutting disc Pipe cutting tool 50-75mm Spare cutting disc

1006634 1006635 1014171 1014173

1 1 1 1

26.54 2.31 48.68 3.75

Polystyrene hot cutter Ideal for use when installing floating floor panels to cut extra grooves and channels in the insulation. Supplied head cuts 15/16mm groove. Optional 20mm head available (1002072).

110V 230V

1006293 1 1006290 1

95.89 85.44

Bevelling tool 12–25 Installation tool for the bevelling of Uponor MLCP. Supplied with turning handle (can also be used as cordless screwdriver attachment, see instructions).

12mm 14mm 16mm 20mm 25mm

1015837 1006952 1006830 1015749 1015756

1 1 1 1 1

22.47 7.70 7.95 8.24 9.48

Bevelling tool 32-75 Installation tool for the bevelling of Uponor MLCP. Supplied with turning handle (can also be used as cordless screwdriver attachment, see instructions).

32mm 40mm 50mm 63mm 75mm

1015762 1006638 1015808 1014339 1014344

1 1 1 1 1

13.06 19.48 22.17 27.26 35.83

3-size bevelling tool Installation tool for the bevelling of Uponor MLCP.

16/20/25mm 56

1015739 8.5

10.17

Bending tool for producing series of identical curves in Uponor MLCP, supplied in carrying case complete with set of bending inserts.

16,20,25,32

1013773 1

138.09

Battery pressing tool UP 75 Supplied in carrying case, complete with battery and charger unit. Range of application: 14-110mm.

Press tool Spare Battery 12V/3Ah Spare re-charging unit

1006827 1 1006949 1 1006950 1

895.92 54.10 58.17

Pressing jaws Jaws for use with Uponor MLCP press fittings, for use with UP75.

16mm 20mm 25mm 32mm 40mm 50mm Pressing chain

63mm pressing chain 75mm pressing chain 90mm pressing chain 110mm pressing chain

1007084 1007086 1007087 1007088 1015768 1015792

1 1 1 1 1 1

55.06 55.06 55.06 55.06 104.13 109.55

Pressing chain for use with 63-110mm Uponor MLCP Press Fittings, to be used in conjunction with UP75 pressing tool and base pressing unit.

1 1 1 1

364.89 435.69 544.61 653.54

1046545 1

157.94

1046541 1046542 1046543 1046544

Base pressing unit

63-110mm base pressing unit

Uponor MLCP Tools Order Code

Description

Pack Qty

Net Price Each (£)

Description

For fitting to the manual pressing tool for the handling of 12-20mm Uponor MLCP press fittings.

1002128 1015776 1015777 1015780

1 1 1 1

28.34 29.75 29.75 29.75

Press Tool (excl. jaw sets) Spare Battery 9.6V/2.0Ah

Net Price

1007096 1 1015703 1

569.13 56.91

Reusable plug with ½“ FT designed for pressure-testing of Uponor MLCP installations.

12mm 16mm 20mm 25mm 32mm 40mm

63-110mm

1 1 1 1 1

59.85 59.85 59.85 63.81 63.81

2.75 1.58 1.64 1.70 3.82 10.03

1014322 1

420.53

Pipe straightener For the fast, simple, straight alignment of Uponor MLCP supplied in coils (14mm to 32mm). Adjustable to the desired size. Can be used in combination with the Uponor MLCP uncoilers.

Pipe straightner Manual pressing tool

1007089 1007091 1007093 1007094 1007095

10 10 10 10 5 2

Set consists of pipe cutting tool and bevelling tool suitable for use with Uponor MLCP (outer diameter: 63-110mm). Supplied in carrying case.

To be used with Mini 32. Note: Cannot be used with Uponor MLCP Modular fittings.

1013752 1013756 1013760 1013762 1013764 1013765

Tool set 63–110

Mini jaw set

12mm 16mm 20mm 25mm 32mm

Pack Qty

Pressure test plug

Inserts for manual pressing tool

12mm 14mm 16mm 20mm

Order Code

12-20mm

1010512 1

144.50

Designed for use with Uponor MLCP 1220mm press fittings (in conjunction with inserts for manual pressing tool). Supplied in carrying case without inserts for pressing tool.

1015764 1

147.91

Special deals available on tool purchases and hire

Contact your Uponor representative or speak to your local plumbers or builders merchant today for more details. www.uponor.co.uk 57

Tools and accessories Uponor PEX Tools

Uponor General Tools Order Code

Description

Pack Qty

Net Price Each (£)

Plastic pipe cutters

Order Code

Description

Uponor Tape

1001369 1001370

1 1

Width 50mm x Length 66m

Optional 20mm head only for use with 20mm PEX floating floor systems. For connection to items 1006290 230v or 1006293 110v.

1002072

Milwaukee expander tool set

Uponor Tape Dispenser

1000012

4.19

NEW For taping of insulation sections and edges (roll or slab). For use with tape 1000012

38.57

NEW

Includes 1x 230V, 50Hz fast battery charger, 2x 14.4V /1.5Ah Li-ion Batteries, 1x 100g tube of Molykote tool lubricant, 1x operation manual, 1x lightweight plastic case. Expander heads included.

M12 Expander tool

Wide tape for sealed joining of SAS insulation roll or slab. Roll width: 50mm Roll Length: 66m

8.46 28.10

Polystyrene hot cutter head (20mm)

20mm head

Net Price Each (£)

NEW

Cost effective PEX pipe cutters to leave the perfect jointing finish.

Pipe cutter 12-28mm Pipe cutter 12-40mm

Pack Qty

1057166

1000142 Uncoiler

20.23

NEW Suitable for both PEX and MLCP pipes. Includes coil retention arms and de-coiling eyelet.

399.00*

Graphite paste 30gm tube 1058662 Mobile Uncoiler 30g

1008334

177.63

NEW Suitable for both PEX and MLCP pipes. Includes coil retention arms and de-coiling eyelet.

1.42

Pipe and conduit cutter This tool is specially designed for cutting pipe-in-conduit. Conduit cutter is guarded to prevent damage to the pipe inside the conduit. Maximum pipe diameter 22mm.

1058663

209.78

Uponor PEX hand tool set and heads Cutter

1009031

Complete tool set in a box. Includes all 3 expander heads and instructions.

25.71

Hydraulic test pump Use to pressure test all UFH and plumbing installations before screeding and before commissioning. Capacity 5 litres. Maximum pressure 25 bar. Connection is ½” MI.

5 Litres 25 BAR

1004057

126.60

3 Heads (16, 20, 25mm)

NEW CODE

1004000

299.00*

Autorotation head Used in conjunction with item 1004000

Kombi gun For all Uponor pipe from 15mm to 20mm (multi-layer composite pipe and crosslinked polyethylene pipe) to all common UK underfloor heating insulation boards. For use with Kombi Klips 1002296 and 1002297. Now includes stand.

Kombi Gun

* denotes List Price

1002295

104.63

1038188

86.60

Comprehensive installer, design and control courses available at the Uponor Training academy. All courses are held at our purpose built facility close to J20 M1, in the market town of Lutterworth.

To enquire about any of the courses available from Uponor call

01455 550355

• UFH Installer Course A two-day course at our purpose-built facility in Lutterworth. The course is aimed at both new and experienced users of our products. Day 1 gives a thorough understanding of applications of UFH in our theory suite. Day 2 follows with practical exercises in our hands-on practical suite. • Design Considerations & Controls Course Recommended as a follow-up to the UFH Installer course, this course is usually aimed at experienced installers and gives a basic understanding of system requirements from a design point of view. You will also have the opportunity to look at any new Uponor products which are now available. • Controls Wiring Course Uponor has recently launched a range of innovative water temperature and air temperature controls. Consequently, we are now offering an informative course aimed at installers and electricians, who wish to increase their product knowledge with respect to Uponor control systems.

• Plumbing Applications Course A tailored course to show the advantages of Uponor plumbing applications over traditional W E N SE materials. Delegates who will benefit from COUR this course would have a previous plumbing knowledge. The course includes Pipe technology, MLCP Riser System, Multi-layer, Pex pipes, RTM & Practical training. • Merchant Course A course which gives an overview of Uponor products and their applications. Mainly aimed at Merchants but can be specifically tailored to give a bespoke course for installers, or anyone who requires specific guidance in the application of UFH or Plumbing. Please contact us to discuss your requirements. *All courses are inclusive of lunch and course materials.

Reference Index Plumbing System

Order Code

1001210 1001212 1001213 1001231 1001338 1001369 1001370 1001420 1002027 1002028 1002034 1002035 1002036 1002038 1002039 1002040 1002057 1002181 1002182 1002183 1002184 1002185 1002186 1002187 1002188 1002189 1002190 1002191 1002192 1002193 1002194 1002195 1002196 1002237 1002238 1002239 1002240 1002273 1002274 1002275 1002277 1002279 1002280 1002281 1002282 1002284 1002285 1002286 1007078 1007079 1007080 1007081 1008281 1008334 1008497 1008661 1008662 1008663 1008664 1008665 1008669 1008671 1008674 1008675 1008676 1008679 1008680 1008681 1008684 1008685 1008686 60

Price

£1.12 £1.71 £2.72 £3.73 £5.80 £8.46 £28.10 £3.50 £2.31 £0.81 £0.54 £1.02 £0.75 £1.59 £2.15 £3.60 £2.32 £86.75 £102.84 £138.34 £169.55 £201.51 £232.24 £265.33 £297.75 £52.44 £80.84 £108.11 £128.97 £149.62 £170.25 £191.21 £213.24 £14.83 £13.98 £22.03 £12.16 £3.23 £3.23 £1.97 £7.00 £18.97 £15.41 £21.95 £30.54 £17.15 £26.30 £33.16 £2.99 £3.27 £3.82 £7.62 £1.50 £1.42 £5.92 £2.40 £2.80 £2.80 £2.99 £3.90 £0.85 £2.22 £1.25 £2.00 £2.50 £0.93 £1.47 £2.89 £1.34 £1.99 £3.34

Page

20 20 20 23 21 24 24 22 22 22 22 22 22 22 22 23 22 14, 44 14, 44 14, 44 14, 44 14, 44 14, 44 14, 44 14, 44 14 14 14 14 14 14 14 14 23 23 23 23 14 14 14 14 14 14 14 14 14 14 14 10 10 10 10 22 24 22 20 20 20 20 20 20 20 21 21 21 20 20 20 20 20 20

Order Code

1008689 1008690 1008691 1008697 1008699 1008700 1008701 1008702 1008703 1008710 1008711 1008714 1008716 1008715 1008717 1008718 1008719 1008720 1008721 1008722 1008723 1008724 1008725 1008932 1009004 1009006 1009008 1009014 1009015 1009030 1011368 1011370 1011372 1012857 1012858 1012859 1012860 1012862 1012863 1012864 1012866 1012867 1012869 1012872 1013137 1013138 1013139 1013140 1013141 1013142 1013144 1013145 1013146 1013147 1013371 1013377 1013378 1013380 1013388 1013392 1013398 1013400 1013401 1013432 1013436 1013438 1013441 1013442 1013443 1013444 1013445

Price

Page

£2.17 20 £3.27 20 £3.50 20 £2.17 20 £3.27 20 £2.17 20 £3.27 20 £3.27 20 £3.27 20 £2.17 20 £3.27 20 £6.99 21 £6.99 21 £7.30 21 £7.30 21 £6.99 21 £6.99 21 £7.30 21 £7.30 21 £3.99 21 £3.99 21 £3.99 21 £3.99 21 £1.35 20 £1.59 23,36,38,40 £3.29 23 £5.62 22 £0.36 23 £0.96 23 £2.14 22 £0.24 15 £0.25 15,22 £0.25 15 £0.78 5 £0.86 5 £0.86 5 £0.86 5 £1.09 5 £1.09 5 £1.09 5 £1.59 5 £1.59 5 £1.59 5 £1.86 5 £0.29 23 £0.29 23 £0.32 23 £0.32 23 £0.49 23 £0.49 23 £0.63 23 £0.80 23 £1.58 23 £1.97 23 £1.85 5,36,38,40 £1.85 5,36,38,40 £1.85 5,36,38,40 £1.85 5,36,38,40 £2.89 5 £2.89 5 £4.58 5 £4.58 5 £6.58 5 £2.18 5 £2.18 5 £3.60 5 £3.60 5 £5.34 5 £5.34 5 £6.69 5 £6.69 5

Order Code

1013446 1013449 1013451 1013453 1013455 1013457 1013463 1013559 1013575 1013625 1013626 1013627 1013628 1013629 1013630 1013675 1013677 1013679 1013681 1013752 1013756 1013760 1013762 1013764 1013765 1013805 1013806 1013807 1013808 1013813 1013814 1013815 1013831 1013970 1014107 1014109 1014111 1014117 1014120 1014121 1014517 1014525 1014534 1014536 1014556 1014561 1014564 1014567 1014574 1014577 1014580 1014582 1014587 1014589 1014592 1014599 1014602 1014605 1014610 1014613 1014618 1014621 1014644 1014686 1014692 1014729 1014732 1014736 1014751 1014755 1014757

Price

£10.99 £16.40 £26.51 £41.50 £61.36 £88.28 £1.85 £1.85 £1.52 £3.34 £4.44 £5.82 £3.53 £4.91 £6.32 £3.44 £5.16 £3.44 £5.16 £2.75 £1.58 £1.64 £1.70 £3.82 £10.03 £1.77 £1.93 £3.25 £7.08 £3.36 £3.43 £3.53 £4.10 £2.99 £14.32 £24.94 £20.29 £8.84 £2.49 £4.10 £4.05 £3.67 £7.24 £4.79 £5.40 £4.57 £5.51 £8.05 £5.13 £6.63 £10.74 £6.46 £10.19 £6.95 £9.05 £7.15 £12.63 £11.61 £10.29 £16.18 £13.20 £19.60 £7.30 £5.08 £5.41 £7.71 £8.08 £7.12 £10.40 £11.21 £10.55

Page

5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 10,18,55 10,18,55 10,18,55 10,18,55 10,18,55 10,18,55 15 15 15 15 15 15 15 14 15 14 14 14 14 14 14,15 9 9 9 15 9 9 9 9 9 9 9 15 15 9 9 9 9 15 9 9 9 9 15 9 9 9 9 9 9 9 9

Order Code

1014761 1014770 1014774 1014871 1014909 1014910 1014918 1014923 1014927 1014931 1014957 1014961 1014970 1014976 1014981 1014983 1014987 1014991 1014994 1014996 1015000 1015002 1015015 1015017 1015021 1015028 1015033 1015038 1015044 1015048 1015053 1015060 1015064 1015068 1015073 1015082 1015088 1015091 1015152 1015154 1015159 1015164 1015179 1015187 1015194 1015202 1015205 1015212 1015215 1015217 1015219 1015270 1015274 1015283 1015286 1015297 1015301 1015345 1015454 1015512 1015515 1015626 1015631 1022714 1022715 1022716 1022717 1022718 1022719 1022720 1022721

Price

£11.70 £15.11 £15.88 £5.80 £7.03 £7.38 £6.43 £10.52 £10.10 £12.80 £9.90 £10.08 £10.08 £9.27 £12.44 £12.62 £14.55 £15.37 £11.52 £10.81 £10.97 £12.26 £11.11 £11.60 £12.72 £14.16 £18.19 £19.29 £16.42 £17.70 £16.18 £17.24 £17.90 £19.17 £27.08 £23.81 £19.72 £22.28 £5.01 £6.24 £5.15 £4.30 £5.29 £5.76 £6.93 £7.46 £8.61 £34.25 £11.70 £12.96 £12.96 £9.00 £9.74 £10.47 £11.04 £11.78 £19.70 £10.20 £16.00 £7.60 £9.93 £10.33 £20.67 £3.26 £4.08 £5.77 £8.97 £4.42 £6.61 £11.26 £17.91

Page

9 9 9 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 9 9 9 9 9 9 9 9 9 10 9 9 9 9 9 9 9 9 9 15 15 15 15 15 15 8 8 8 8 8 8 8 8

Reference Index Plumbing System

Order Code

1022722 1022723 1022724 1022725 1022726 1022727 1022728 1022729 1022730 1022731 1022732 1022733 1022734 1022735 1022736 1022737 1022738 1022739 1022740 1022741 1022742 1022743 1023040 1023042 1023045 1025723 1025724 1025725 1025726 1025727 1025729 1029121 1029122 1029125 1029126 1029127 1029128 1029129 1029130 1029131 1029132 1029133 1029134 1029135 1029136 1029137 1029138 1029139 1029140 1029141 1029142 1029143 1029144 1029145 1029146 1030301 1033974 1038021 1038022 1038023 1038024 1038025 1038037 1038038 1038039 1038040 1038188 1042320 1042329 1042330 1042331

Price

£6.14 £6.14 £6.14 £6.14 £10.64 £7.41 £9.33 £8.57 £7.97 £10.04 £12.94 £15.70 £15.76 £16.01 £2.60 £3.49 £5.35 £8.75 £3.17 £4.94 £5.08 £8.40 £1.50 £2.99 £9.99 £6.13 £8.15 £5.87 £7.87 £7.49 £6.22 £19.61 £19.61 £21.51 £27.23 £76.25 £81.69 £145.96 £160.12 £23.96 £32.68 £38.12 £16.34 £23.96 £32.68 £38.12 £21.51 £65.35 £30.50 £70.80 £27.23 £70.80 £19.61 £49.02 £35.94 £4.91 £1.04 £3.99 £4.30 £4.99 £5.99 £6.99 £4.30 £4.99 £5.99 £7.99 £86.60 £5.99 £3.25 £4.20 £4.20

Page

8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 22 22 22 21 21 21 21 21 21 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 21 23 21 21 21 21 21 21 21 21 21 24 22 21 21 21

Order Code

1042332 1042333 1042334 1042335 1042336 1042337 1042338 1042339 1042340 1042341 1042342 1042343 1042386 1042387 1042834 1042835 1042838 1042839 1046387 1046388 1046389 1046392 1046393 1046394 1046395 1046396 1046397 1046398 1046399 1046401 1046402 1046403 1046404 1046405 1046406 1046477 1046478 1046603 1046604 1046605 1046606 1046607 1046608 1046609 1046610 1046611 1046612 1046750 1046751 1046901 1046902 1046903 1046904 1046905 1046906 1046907 1046908 1046909 1046910 1046911 1046912 1046913 1046914 1046915 1046916 1046917 1046918 1046919 1046920 1046921 1046924

Price

£5.00 £9.00 £2.99 £4.99 £4.99 £5.99 £2.99 £3.99 4.99 5.25 £3.99 £4.59 £0.20 £0.20 £0.25 £0.25 £0.30 £0.30 £24.12 £26.92 £35.90 £19.18 £20.76 £20.76 £20.20 £21.88 £25.57 £27.50 £30.86 £14.03 £17.95 £12.91 £14.58 £17.40 £18.52 £56.64 £98.03 £22.39 £30.86 £34.22 £46.28 £86.76 £100.47 £171.60 £12.63 £21.27 £41.23 £27.23 £43.57 £16.71 £21.80 £18.75 £20.30 £23.75 £38.47 £22.61 £21.27 £24.20 £22.67 £31.18 £26.28 £40.42 £40.42 £40.26 £22.26 £25.37 £24.89 £24.43 £26.92 £30.58 £28.80

Page

21 21 21 21 21 21 20 20 20 20 21 21 20 20 20 20 20 20 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 12 12 15 12 12 12 12 12 12 12 12 12 12 12 9 9 9 9 9 9 9 9 9 9 9 9 10 10 10 10 10 10 10 10 10 10

Order Code

1046925 1046926 1046927 1046928 1046930 1046931 1046932 1046933 1046934 1046935 1046937 1046938 1046939 1046940 1046941 1047941 1047942 1047997 1047998 1047999 1048000 1048001 1048002 1048003 1048004 1048005 1048274 1048275 1048276 1048277 1048278 1048471 1048539 1048542 1048543 1048544 1048545 1048546 1048547 1048548 1048549 1048550 1048551 1048552 1048553 1048554 1048555 1048556 1048557 1048558 1048559 1048560 1048561 1048562 1048563 1048564 1048565 1048566 1048567 1048568 1048569 1048570 1048571 1048572 1048573 1048574 1048575 1048576 1048577 1048578 1048579

Price

£29.06 £35.35 £31.02 £44.81 £16.10 £18.81 £17.55 £22.41 £23.68 £23.72 £25.27 £27.19 £31.62 £20.70 £20.70 £3.40 £3.99 £7.00 £6.50 £7.99 £8.99 £11.99 £5.99 £5.99 £2.90 £5.50 £328.16 £357.71 £387.40 £417.74 £59.72 £10.50 £4.46 £3.54 £4.46 £6.86 £4.17 £6.17 £3.60 £4.86 £8.17 £4.55 £7.14 £11.71 £6.86 £6.86 £6.86 £10.86 £10.29 £6.29 £7.20 £9.03 £6.34 £7.77 £10.86 £7.43 £8.29 £6.74 £7.99 £8.86 £11.42 £13.26 £16.00 £17.26 £8.00 £14.11 £21.14 £30.97 £15.83 £24.47 £27.90

Page

10 10 10 10 9 9 9 9 9 9 9 9 9 12 12 22 22 21 21 21 21 21 21 21 21 21 14 14 14 14 14 15 7 6 6 6 6 6 6 6 6 7 7 7 7 7 7 7 7 7 7 7 6 6 6 7 7 7 7 7 7 7 7 6 6 6 6 7 7 7 7

Order Code

1048580 1048581 1048582 1048583 1048584 1048585 1048586 1048587 1048588 1048589 1048590 1048591 1048592 1048593 1048594 1048595 1048598 1048599 1048600 1048601 1048602 1048603 1048606 1048607 1057364 1057365 1057368 1057370 1057375 1057376 1057377 1057378 1057379 1057840 1057842 1057844 1057846 1057847 1058086 1058088 1058090 1058092 1058093 1058802 1058803 1058804 1058805 1058934 1058935 1059173 1059174 1059175 1059176 1059177 1059178 1059179 1059180 1059181 1059182 1059183 1059405 1059406 1059407 1059408 1059510 1059511

Price

£26.69 £7.71 £8.69 £9.71 £12.00 £13.71 £19.43 £12.00 £14.00 £15.71 £7.43 £9.37 £10.00 £13.70 £14.51 £21.71 £13.26 £7.77 £9.13 £11.31 £13.71 £5.37 £1.71 £2.86 £10.86 £14.29 £3.40 £5.81 £9.50 £11.50 £8.50 £15.50 £16.00 £1.84 £3.60 £12.88 £9.60 £4.00 2.52 5.66 £3.29 £3.89 £7.91 £1.39 £1.53 £2.90 £3.82 £2.13 £5.19 £1.39 £2.71 £3.80 £2.65 £4.00 £7.08 £2.65 £4.00 £7.08 £1.39 £1.39 £16.99 £21.99 £35.60 £42.50 £2.13 £5.19

Page

7 7 7 7 7 7 7 7 7 7 6 6 6 6 6 6 7 7 7 7 7 7 7 7 7 7 22 22 7 7 7 7 7 16 16 16 16 16 14 14 36 14 14 20 20 20 20 22 22 20 20 20 20 20 20 20 20 20 20 20 9 9 9 9 22 22

Reference Index Pre-Insulated Pipe System

Order Code

1002138 1002140 1002141 1002142 1002146 1002147 1007355 1007357 1018109 1018110 1018111 1018112 1018113 1018114 1018115 1018116 1018117 1018118 1018119 1018120 1018121 1018124 1018125 1018126 1018127 1018128 1018129 1018130 1018131 1018132 1018133 1018134 1018135 1018136 1018137

Price

Page

£31.05 £18.31 £31.10 £43.49 £18.31 £18.31 £579.94 £26.24 £34.39 £37.35 £48.99 £52.44 £59.43 £80.95 £91.07 £108.45 £35.67 £39.76 £52.77 £61.99 £71.42 £21.56 £22.25 £46.84 £49.18 £53.49 £51.99 £56.21 £77.62 £22.75 £26.36 £47.13 £53.57 £57.77 £78.93

53 53 53 53 53 53 30 30 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28

Order Code

1018138 1018139 1018140 1018141 1018142 1018147 1018148 1018149 1018266 1018268 1018269 1018306 1018307 1018308 1018309 1018310 1018311 1018312 1018313 1018314 1018315 1018316 1018326 1018327 1018328 1018329 1018330 1018331 1018332 1018333 1018334 1018335 1018336 1018338 1018339

Price

Page

£95.28 £50.69 £53.69 £58.66 £66.52 £69.55 £76.37 £79.85 £39.21 £52.29 £42.95 £41.08 £43.15 £42.13 £38.22 £42.73 £53.83 £39.25 £39.25 £32.69 £32.29 £24.20 £1,051.91 £1,174.68 £20.75 £22.81 £29.96 £40.24 £68.54 £95.12 £136.13 £169.50 £21.54 £24.11 £29.99

28 28 28 28 28 28 28 28 30 30 30 26,29 26,29 26,29 26,29 26,29 26,29 26,29 26,29 26,29 26,29 26,29 30 30 26,29 26,29 26,29 26,29 26,29 26,29 26,29 26,29 26,29 26,29 26,29

Order Code

1018340 1018341 1018345 1018346 1018347 1018348 1018350 1018351 1018352 1018353 1018355 1018356 1018357 1018358 1018359 1018360 1018362 1018364 1018368 1018369 1018371 1018372 1018374 1018375 1018376 1018378 1018380 1018381 1018382 1018385 1018400 1018401 1018402 1018403 1018404

Price

Page

£41.68 £65.66 £21.83 £24.77 £50.31 £116.71 £18.46 £23.10 £54.84 £101.15 £12.57 £17.10 £31.70 £45.76 £48.80 £67.15 £128.77 £147.84 £14.28 £14.28 £37.36 £30.97 £71.18 £55.96 £56.45 £17.85 £30.83 £32.60 £9.57 £28.59 £9.44 £12.62 £21.11 £31.08 £41.23

26,29 26,29 29 29 29 29 29 29 29 29 29 29 29 29 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30

Order Code

1018405 1018406 1018407 1021990 1021991 1021992 1042970 1042972 1042973 1042974 1042979 1042980 1042981 1042982 1042983 1042984 1042985 1042986 1042987 1045310 1045311 1045312 1048697 1048699 1048700 1048701 1048702 1048902 1048903 1048904 1048905 1048906 1048907 1048908 1048909

Price

Page

£77.33 £147.91 £176.33 £356.76 £307.12 £263.58 £29.22 £29.46 £36.42 £37.54 £46.98 £46.94 £116.24 £116.45 £71.37 £70.89 £173.54 £239.09 £332.57 £24.05 £26.62 £32.10 £256.97 £256.97 £301.39 £342.63 £311.96 £42.38 £43.07 £67.65 £70.01 £74.31 £75.09 £77.01 £98.43

30 30 30 30 30 30 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 30 30 30 30 30 28 28 28 28 28 28 28 28

Underfloor Heating System

Order Code

1000012 1000017 1000018 1000022 1000080 1000142 1000502 1000503 1000504 1000505 1000514 1000515 1000534 1000537 1000538 1000539 1002013 1002014 1002015 1002016 1002017 1002018 1002020 1002021 1002022 1002023 1002024 1002038 1002038 1002039 1002046 1002047 1002051 1002052 1002053 1002070 1002071 1002072 1002076 1002130 1002131 1002133 1002134 1002181 1002182 1002183 1002184 1002185 1002186 1002187 1002188 1002201 1002202 1002203 1002204 1002205 1002206 1002207 1002208 1002287 1002288 1002289 1002290 1002291 1002292 1002293 1002294 1002295 1002296 1002297 1002353

Price

Page

£4.19 37, 56 £4.59 39, 46 £2.84 39, 47 £0.27 39, 47 £1.16 38, 39, 46 £20.23 37, 58 £61.82 49 £4.39 49 £78.23 49 £11.92 49 £10.05 50 £31.83 50 £135.54 50 £27.04 50 £22.13 50 £2.14 50 £78.22 48 £78.22 48 £85.17 48 £93.51 48 £101.77 48 £0.24 39 £8.67 44 £7.42 44 £50.49 44 £18.95 44 £9.44 44 £1.59 38 £1.59 37,38,40,42 £2.15 46 £14.73 39, 46 £89.10 52 £4.47 44 £21.04 43 £27.66 38,41,43,44 £5.70 41 £0.94 58 £38.57 35 £427.36 52 £14.11 52 £111.79 52 £86.56 52 £182.51 52 £86.75 46 £102.84 46 £138.34 46 £169.55 46 £201.51 46 £232.24 46 £265.33 46 £297.75 46 £108.07 38,40,42 £149.75 38,40,42 £185.75 38,40,42 £222.43 38,40,42 £257.92 38,40,42 £295.67 38,40,42 £332.93 38,40,42 £368.88 38,40,42 £419.28 38,40,42 £522.69 38,40,42 £584.19 38,40,42 £600.25 38,40,42 £636.86 38,40,42 £672.30 38,40,42 £710.08 38,40,42 £747.18 38,40,42 £104.63 37,45,56 £0.08 37,45 £0.14 39,47 £507.19 48

Order Code

1002354 1002355 1002356 1005291 1006290 1006293 1006641 1007179 1007227 1009004 1009132 1009135 1009148 1009188 1009228 1009229 1009230 1009231 1009233 1013006 1013127 1013130 1033239 1013463 1013377 1013378 1013559 1013371 1013380 1016703 1033883 1033889 1033891 1034338 1034340 1034347 1034352 1034358 1034365 1034371 1034377 1034491 1034492 1034500 1034538 1045564 1045567 1045572 1046083 1046114 1046115 1046116 1046886 1047456 1047457 1047459 1047622 1047623 1047624 1047625 1047700 1047701 1047702 1047703 1047704 1047705 1047706 1047707 1047708 1047709 1047710

Price

Page

£631.78 48 £709.00 48 £201.21 48 £0.08 39,47 £85.44 56 £95.89 56 £3.73 37 £30.98 37 £7.72 37 £1.59 37,38,40,42 £6.94 47 £1.32 47 £405.54 44, 49 £234.12 46 £2.05 46 £2.05 46 £2.05 46 £2.05 46 £2.34 46 £27.66 44,49 £2.33 39 £1.08 39,47 £2.05 46 £1.85 41,42,44 £1.85 41,42,44 £1.85 41,42,44 £1.85 41,42,44 £1.85 41,42,44 £1.85 41,42,44 £8.96 39,46 £1.47 44 £1.47 44 £1.47 44 £31.05 44 £3.49 44 £13.94 47 £19.07 47 £2.05 44 £9.17 41, 43 £1.24 47 £200.83 46 £12.09 47 £9.55 47 £5.20 44 £2.05 46 £396.29 49 £285.46 49 £68.79 49 £198.66 49 £68.15 49 £5.86 49 £91.02 48 £28.28 46 £135.54 52 £40.03 52 £22.13 52 £1.23 40,42,44 £1.23 40,42,44 £1.85 37 £1.85 37 £271.95 53 £313.12 53 £307.97 53 £369.72 53 £328.55 53 £343.99 53 £426.34 53 £364.58 53 £385.17 53 £380.02 53 £482.95 53

Order Code

1047711 1047712 1047713 1047714 1047715 1047716 1047717 1047718 1047719 1047720 1047721 1047722 1047723 1047724 1047725 1047844 1047845 1047846 1048010 1048011 1048012 1048013 1048274 1048275 1048276 1048277 1048675 1048762 1048764 1048807 1057095 1057096 1057097 1057098 1057099 1057100 1057101 1057102 1057103 1057104 1057105 1057106 1057107 1057108 1057441 1057442 1057368 1058090 1058385 1058386 1058387 1058425 1058662 1058663 1058856 1058857 1059132 1059643 1059644 1059645 1059646 1059647 1059648 1059649 1059650 1059651 1059652 1059653 1059654 1059655 1059656

Price

Page

£400.60 53 £421.19 53 £416.05 53 £539.57 53 £457.22 53 £477.81 53 £452.07 53 £596.18 53 £493.25 53 £513.83 53 £488.10 53 £652.79 53 £529.28 53 £549.86 53 £570.45 53 £508.73 48 £698.28 48 £123.46 48 £46.30 50 £58.82 50 £65.35 50 £79.67 50 £328.16 46 £357.71 46 £387.40 46 £417.74 46 £2.79 37 £20.47 48 £20.47 48 £9.52 37 £242.38 51 £299.57 51 £266.72 51 £352.51 51 £291.06 51 £405.45 51 £315.40 51 £458.37 51 £339.74 51 £511.31 51 £364.09 51 £564.25 51 £388.42 51 £617.19 51 £5.14 37,38,41,43 £3.83 46 £5.14 37 £3.29 38,40,42 £47.88 39 £27.04 50 £27.04 50 £59.48 52 £177.63 37, 58 £209.78 37, 58 £1.23 38,40,42 £1.23 38,40,42 £11.99 38,41,43 £888.12 34 £478.59 34 £1153.03 34 £743.49 34 £992.39 34 £628.29 34 £1257.30 34 £893.19 34 £1049.69 34 £685.59 34 £1308.87 34 £944.76 34 £1177.07 34 £812.09 34

Order Code

1059657 1059658 1059659 1059660 1059661 1059662 1059663 1059664 1059665 1059666 1059667 1059668 1059669 1059670 1059671 1059672 1059673 1059674 1059675 1059676 1059677 1059678 1059679 1059680 1059681 1059682 1059683 1059684 1059685 1059686 1059687 1059688 1059689 1059690 1059691 1059692 1059693 1059694

Price

£1441.98 £1076.99 £1234.38 £869.39 £1493.55 £1128.56 £1291.68 £926.69 £1545.12 £1180.13 £1374.82 £998.77 £1639.72 £1274.24 £1432.12 £1066.63 £1691.29 £1325.81 £1489.42 £1123.93 £1742.86 £1377.38 £1554.79 £1188.42 £1819.69 £1453.33 £1612.09 £1245.73 £1871.26 £1504.90 £1669.39 £1296.72 £1922.83 £1556.47 £1726.69 £1360.33 £1974.40 £1597.23

Page

34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34

Reference Index Energy System

Order Code

1002137 1002139 1002143 1002144 1002145 1002160

Price

Page

£690.30 £16.65 £33.90 £23.17 £16.38 £45.60

55 55 55 55 55 55

Order Code

1002162 1002163 1002164 1002166 1002167 1002367

Price

Page

£5.44 £95.10 £28.67 £25.43 £35.48 £6.54

55 55 55 55 55 55

Price

Page

£55.06 £55.06 £55.06 £55.06 £59.85 £59.85 £59.85 £63.81 £63.81 £850.32 £25.71 £144.50 £20.33 £8.17 £2.77 £1.77

54 54 54 54 55 55 55 55 55 55 56 55 54 54 54 54

Order Code

1002368 1048224 1048225 1048226 1048227 1048228

Price

Page

£37.31 £209.29 £418.59 £627.88 £523.24 £837.18

55 55 55 55 55 55

Price

Page

£1.81 £3.01 £3.72 £138.09 £2.21 £3.04 £48.68 £3.75 £420.53 £27.26 £35.83 £56.91 £10.17 £8.24 £9.48 £13.06

54 54 54 54 54 54 54 54 55 54 54 55 54 54 54 54

Order Code

1048229 1048230 1048231 1048232 1048233 1048234

Price

Page

£1,046.47 £214.45 £343.11 £428.88 £643.33 £857.77

55 55 55 55 55 55

Price

Page

£147.91 £104.13 £29.75 £29.75 £29.75 £109.55 £22.17 £22.47 £364.89 £435.69 £544.61 £653.54 £157.94 £399.00

55 54 55 55 55 54 54 54 54 54 54 54 54 24

Tools and Accessories

Order Code

1001369 1001370 1002128 1004000 1004057 1006634 1006635 1006636 1006637 1006638 1006640 1006827 1006830 1006949 1006950 1006952

Price

Page

£8.46 £28.10 £28.34 £299.00 £126.60 £26.54 £2.31 £29.36 £4.88 £19.48 £2.47 £895.92 £7.95 £54.10 £58.17 £8.14

24 24 55 24 56 54 54 54 54 54 54 54 54 54 54 54

Order Code

1007084 1007086 1007087 1007088 1007089 1007091 1007093 1007094 1007095 1007096 1009031 1010512 1013719 1013721 1013726 1013729

Order Code

1013734 1013737 1013739 1013773 1013792 1013794 1014171 1014173 1014322 1014339 1014344 1015703 1015739 1015749 1015756 1015762

Order Code

1015764 1015768 1015776 1015777 1015780 1015792 1015808 1015837 1046541 1046542 1046543 1046544 1046545 1057166

Notes

Uponor - Conditions of Sale

Interpretation In these conditions-

Buyer means the company, firm, body or person buying the Goods and/or services or whose order for the Goods and/or Services is accepted by the Supplier;

Conditions means the terms and conditions set out in this document and include any special terms and conditions agreed in writing between the Buyer and the Supplier; any special terms shall prevail;

Contract means the contract for the sale of the Gods and/or Services to be provided by the Supplier pursuant to the Contract;

Goods mean the goods the Supplier agrees to supply;

Services means the Services the Supplier agrees to supply;

Supplier means Uponor Housing Solutions Ltd or any other Uponor Group Company

Writing includes fax, e-mail and other comparable means of communication

1.2

Any reference in these conditions to any provision of a statute shall be construed as a reference to that provision as amended, re-enacted or extended at the relevant time.

1.3

Any reference to any English legal concept or term shall, where relevant, be deemed to apply to the nearest analogous concept or term in any other jurisdiction.

Basis of the Sale

2.1

The Supplier shall sell the Goods and/or Services in accordance with any written quotation of the Supplier which is accepted by the Buyer or written order of the Buyer which is accepted by the Supplier, subject in either case to these Conditions, which shall govern the Contract to the exclusion of any other terms and conditions.

2.2

No variation to these Conditions shall be binding unless agreed in Writing by an authorised representative of the Supplier.

2.3

Any typographical, clerical or other error or omission in any sales literature, quotation, price list, acceptance of offer, invoice or other document or information issued by the Supplier shall be subject to correction without any liability on the part of the Supplier.

Orders and Specifications

3.1

No order submitted by the Buyer is accepted by the Supplier unless confirmed in Writing by the Supplier’s authorised representative or delivery of the Goods and/or Services by the Supplier.

3.2

The Buyer is responsible for ensuring the accuracy of the terms of any order (including any applicable specification) and for giving the Supplier any necessary information relating to the Goods and/or Services within a sufficient time to enable the Supplier to perform the Contract in accordance with its terms.

3.3

The quantity, quality and description of and any specification for the Goods and/or Services are those set out in the Supplier’s quotation or the Buyer’s order (to the extent accepted by the Supplier).

3.4

If the Goods are to be manufactured or any process is to be applied to the Goods by the Supplier in accordance with a specification submitted by the Buyer, the Buyer shall indemnify the Supplier against all loss, damages, costs and expenses incurred by the Supplier in connection with any claim for infringement of any patent, copyright, design, trade mark or other intellectual property rights. The Supplier gives no warranty that any Goods based on the specification of the Buyer will be fit for their intended purpose.

3.5

The Supplier may make any changes in the specification of the Goods and/ or Services which are required to conform to any applicable statutory or EC requirements or which do not materially affect their quality or performance.

3.6

No order which has been accepted by the Supplier may be cancelled by the Buyer, except with the agreement in Writing of the Supplier and on terms that the Buyer indemnifies the Supplier in full against all loss (including loss of profit), costs (including the cost of all labour and materials used), damages, charges and expenses incurred by the Supplier as a result of cancellation.

3.7

All drawings, designs, specifications and other information provided by the Supplier are confidential and all rights of copyright ownership and other intellectual property rights in respect of them shall remain vested in the Supplier and shall not pass to the Buyer.

Delivery and Performance

8.7

6.1

Unless otherwise agreed in Writing by the parties, delivery of the Goods shall be made by the Supplier “ex works” as that term is defined in “Inco terms” - the international rules for the interpretation of trade terms of the International Chamber of Commerce sales dated 2000.

The Supplier shall not be liable to the Buyer for loss of contracts, profits, anticipated savings, revenue, business, stoppage to other work or indirect or consequential loss (whether caused by the negligence of the Supplier, its employees or agents or otherwise) in connection with this Contract.

8.8

6.2

Any dates quoted for delivery of the Goods and/or Services are approximate only and the Supplier shall not be liable for any delay in delivery of the Goods and/or Services.

6.3

If the Supplier fails to deliver the Goods or Services (or any instalment) and the Supplier is liable under these Conditions, the Supplier’s maximum liability shall be the excess (if any) of the cost to the Buyer of similar goods or services to replace those not delivered or performed over the price of the Goods or Services.

Notwithstanding any other provision in the Contract except Condition 8.5, the entire liability of the Supplier under or in connection with the Contract shall not exceed the sum paid to the Supplier by the Buyer for the Goods or the Services (or both, where both Goods and Services are to be supplied) which are the subject of the claim in question by the Buyer.

8.9

The Supplier shall not be liable for any breach of its obligations to the extent that the Supplier is prevented or hindered from complying with them by “Force Majeure”.

6.4

If the Buyer fails to take delivery of the Goods or fails to give the Supplier adequate delivery instructions then, without prejudice to any other right or remedy available to the Supplier, the Supplier may store the Goods until actual delivery and charge the Buyer for the reasonable costs (including insurance) of storage and/or sell the Goods at the best price readily obtainable and (after deducting all reasonable storage and selling expenses) account to the Buyer for the excess over the price under the Contract or charge the Buyer for any shortfall below the price under the Contract.

6.5

The Buyer shall comply with all laws governing the importation of the Goods into the country of destination.

6.6

The Supplier will not accept any order for goods which has a nett value of under £500.00 (excluding VAT and delivery) other than an order for products from its “Spares List”.

6.7

The Buyer shall be liable to pay the Suppliers charges for transport of the Goods where:

6.7.1 The Suppliers net invoice value (excluding VAT and delivery costs) is between £300.00 and £500.00. In this instance the cost of carriage will be limited to £25.00 6.7.2 The goods ordered by the Buyer are specified as being required on a next day delivery. Where a next day service is required customers should contact the supplier for a delivery charge quotation. Delivery will be charged on a cost basis whether this is to the Buyers address or that of a third party. 6.7.3 Delivery of the goods is requested to site or another third party address other than on a next day service. Where this is requested the following charges shall apply;

Net Invoice value £500 - £999

Carriage charge £50.00

Net Invoice value £1000 - £2999

Carriage charge £75.00

Net Invoice value over £3000

Free

6.7.4 Where a next day service is required customers should contact the supplier for a delivery charge quotation.

Terms of Payment

5.1

The Supplier may invoice the Buyer at any time for the price of the Goods and/or Services or part of it and, without limitation, may invoice the Buyer in respect of any instalment of an order. Unless the Supplier specifies otherwise (in writing), the Buyer shall pay the invoice (in full without any set off, deduction or counterclaim) within 30 days of the end of the calendar month in which the invoice is dated. Time of payment of the price shall be of the essence of the Contract.

5.2

5.3

If the Buyer fails to make any payment by the due date or the Supplier has reasonable grounds for believing that the Buyer will not make any payment then, without prejudice to any other right or remedy available to the Supplier, the Supplier may cancel the Contract or suspend any further deliveries to the Buyer. If the Buyer fails to make any payment on the due date then without prejudice to any other right or remedy available to the Company the Company shall be entitled to charge the Buyer interest (both before and after any judgment) on the amount unpaid at the rate of 8% per annum above Bank of England base rate from time to time until payment is made (a part of a month being treated as a full month for the purpose of calculating interest)

9.1.3 the Buyer ceases, or threatens to cease, to carry on business; or 9.1.4 the Supplier reasonably believes that any of the foregoing events is about to occur in relation to the Buyer and notifies the Buyer accordingly. 9.2

If the Goods and/or Services have been delivered but not paid for and the Supplier cancels the Contract under Conditions 5.2 and/or 9, the price shall become immediately due and payable notwithstanding any previous agreement or arrangement to the contrary.

10. Non-standard Orders 10.1 Where the Buyer orders Goods or materials of a type, size or quality not normally produced by the Supplier or Services not normally performed by the Supplier, the Supplier shall use all reasonable endeavours to execute the order but, without prejudice to any other provision limiting the Supplier’s liability, if it proves impossible, impracticable or uneconomical to carry out or complete the order, the Supplier may cancel the Contract or the uncompleted balance of it without penalty and the Buyer shall only be liable to pay for the part of it actually delivered or performed.

Risk and Property

11.2 Where Goods are sold FOB, the Supplier shall not be required to give the Buyer the notice specified in Section 32(3) of the Sale of Goods Act 1979.

7.1

Risk of damage to or loss of the Goods shall pass to the Buyer at the time of delivery or, if the Buyer wrongfully fails to take delivery the time when the Supplier has tendered delivery of the Goods. The Buyer should insure the Goods accordingly.

7.2

Notwithstanding delivery and the passing of risk in the Goods, or any other provision of these Conditions, the property in the Goods shall not pass to the Buyer until the Supplier has received in cash or cleared funds payment in full of the price of the Goods and all other goods and services agreed to be sold by the Supplier to the Buyer for which payment is then due.

7.3

Until such time as the property in the Goods passes to the Buyer, the Buyer shall hold the Goods as the Supplier’s fiduciary agent and bailee, and shall keep the Goods separate from those of the Buyer and third parties and properly stored, protected and insured and identified as the Supplier’s property, and shall not be entitled to dispose of the Goods.

7.4

Until such time as the property in the Goods passes to the Buyer, the Supplier may at any time require the Buyer to deliver up the Goods to the Supplier and, if the Buyer fails to do so forthwith, enter upon any premises of the Buyer or any third party where the Goods are stored and repossess the Goods.

Warranties and Liability

Warranties Subject to the conditions set out below, the Supplier warrants that the Goods will correspond with their specification at the time of delivery and will be free from defects in material and workmanship for a period of 12 months from delivery. This warranty is given by the Supplier subject to the following conditions:

8.2

The Supplier may sue the Buyer for the price of the Goods, notwithstanding that title to them has not passed to the Buyer.

9.1.2 an encumbrancer takes possession, or a receiver is appointed, of any of the property or assets of the Buyer; or

11.1 Subject to Condition 6.1, where Goods are sold on the basis of international trade terms, they shall be defined in accordance with “Inco terms” - the international rules for the interpretation of trade terms of the International Chamber of Commerce sales dated 2000.

The price of the Goods and/or Services shall be the price specified on the Supplier’s confirmation of order or, if none, the price specified in the Supplier’s quotation or, if none, the Supplier’s published price list current at the date of supply of the Goods and/or Services shall apply.

4.4

9.1.1 the Buyer is unable to pay its debts, makes any voluntary arrangement with its creditors or (being an individual or firm) becomes bankrupt or (being a company) becomes subject to an administration order or goes into liquidation; or

Retention to title: Goods remain the property of Uponor Limited until paid for in full. Any query regarding this delivery should be notified in writing to Uponor Limited within 3 working days of receipt of the goods.

Price of Goods

All prices are given by the Supplier on an ex works basis and exclude VAT and other duties and the Buyer shall be liable to pay those duties and (subject to condition 6.6) the Supplier’s charges for transport, packaging and insurance.

Without prejudice to any other right or remedy available to the Supplier, the Supplier may cancel the Contract or suspend any further deliveries without any liability to the Buyer, if:

Any alteration to condition 6.7(.1 to .4) must be agreed and confirmed in writing by the Supplier.

4.1

4.3

Insolvency of Buyer

9.1

6.9

The Supplier may vary the price of the Goods and/or Services at any time before delivery to reflect any change in the cost to the Supplier which is due to any factor beyond the control of the Supplier (including, without limitation, foreign exchange fluctuation, currency regulation, increase in the costs of labour, materials or other costs of manufacture), any change in delivery dates, quantities or specifications for the Goods and/or Services which is requested by the Buyer, or any delay caused by any instructions of the Buyer or failure of the Buyer to give the Supplier adequate information or instructions.

6.8

8.1

4.2

8.10 “Force Majeure” means any cause beyond the reasonable control of the Supplier including (without limitation) strikes, lock‑outs, labour

8.2.1 the Supplier shall be under no liability in respect of any defect arising from any drawing, design or specification supplied by the Buyer; 8.2.2 the Supplier shall be under no liability in respect of any defect arising from fair wear and tear, wilful damage, negligence, abnormal working conditions, failure to follow the Supplier’s instructions (whether oral or in Writing), misuse or alteration or repair of the Goods without the Supplier’s approval; 8.2.3 this warranty does not extend to parts, materials or equipment not manufactured by the Supplier, in respect of which the Buyer shall only be entitled to the benefit of any such warranty or guarantee as is given by the manufacturer to the Supplier. 8.3

8.4

8.5

Subject as expressly provided in these Conditions, all warranties, conditions or other terms implied by statute or common law are excluded to the fullest extent permitted by law. Without limitation, the Supplier does not warrant the accuracy or otherwise of any design, drawing, specification, instructions, other information or advice that it provides as part of the Services and/or as ancillary information in relation to the Goods. Any claim by the Buyer which is based on any defect in the quality or condition of the Goods or their failure to correspond with specification shall be notified in writing to the Supplier within 7 days of delivery or (where the defect or failure was not apparent on reasonable inspection) within a reasonable time after discovery of the defect or failure, but, in any event, within 12 months of delivery. If delivery is not refused, and the Buyer does not notify the Supplier accordingly, the Buyer may not reject the Goods and the Supplier shall have no liability and the Buyer shall pay the price as if the Goods had been delivered in accordance with the Contract. Where any valid claim is made in accordance with this Clause 8, the Supplier may replace or repair the Goods (or the part in question) or re-supply the Services (or the part in question) free of charge or, at the Supplier’s sole discretion, refund to the Buyer the price of the Goods or Services (or part of it), but the Supplier shall have no further liability to the Buyer.

11. Export Sales

11.3 Unless otherwise agreed by the Supplier in Writing, the price of the Goods and/or Services shall be secured by an irrevocable letter of credit satisfactory to the Supplier and established by the Buyer in favour of the Supplier immediately upon receipt of the Supplier’s confirmation of order form and confirmed by a United Kingdom bank acceptable to the Supplier. The letter of credit shall be for the price payable plus any duties and taxes payable to the Supplier and shall be valid for the longer of six (6) months or any period estimated by the Supplier for delivery of the Goods and/or Services. 12.

Packing

12.1 Unless otherwise agreed in Writing by the parties, the price specified by the Supplier excludes the cost of packing cases and packing materials, for which the Buyer shall be additionally liable. If the Supplier notifies the Buyer that packing cases and/or materials are returnable, then the full cost of these is payable by the Buyer if the Buyer does not return them in good condition to the Supplier either (at the Supplier’s option) carriage paid or in the Supplier’s vehicle within three (3) months of their delivery to the Buyer. Where not returnable, the Buyer will dispose of all packing in accordance with the regulations (whether statutory or otherwise) relating to the protection of the environment. 12.2 The Supplier shall use all reasonable endeavours to ensure, where necessary, the appropriateness of packing before despatch, but the Supplier shall not be liable for any damage to or loss of Goods between despatch from the Supplier and delivery in accordance with this Contract. 13.

General

13.1 The Supplier may perform any of its obligations or exercise any of its rights under this Contract through any other member of its group. 13.2 The Buyer may not assign any of its rights or obligations or mortgage, charge (otherwise than by floating charge) any of its rights under this Agreement without the prior written consent of the Supplier. 13.3 Each party acknowledges that, in entering into this Contract, it does not do so on the basis of and does not rely on any representation, warranty or other provision except as expressly provided in this Contract and all conditions, warranties or other terms implied by statute or common law are excluded. This condition shall only apply to the extent permitted by law. 13.4 Any notice required or permitted to be given by either party to the other shall be in Writing addressed to that other party at its registered office or principal place of business or such other address as may at the relevant time have been notified pursuant to this provision to the party giving the notice. 13.5 No waiver by the Supplier of any breach of the Contract by the Buyer shall be considered as a waiver of any subsequent breach of the same or any other provision. 13.6 If any provision of the Contract is held by any competent authority in UK law to be invalid or unenforceable in whole or in part the validity of the other provisions of the Contract and the remainder of the provision in question shall not be affected. 13.7 A person who is not a party to the Contract has no rights under the Contracts (Rights of Third Parties) Act 1999 to enforce any term of the Contract. 13.8 The Contract shall be governed by and construed in accordance with the laws of England, and the parties submit to the non‑exclusive jurisdiction of the English courts. 13.9 When supplied as B2B EEE the producer invokes regulation 9.2 and passes all WEEE obligations to the end user.

General Liability 8.6

Notwithstanding anything else in this Contract, neither party’s liability in respect of death or personal injury caused by that party’s negligence shall be limited.

Uponor Limited (â&#x20AC;&#x153;Uponorâ&#x20AC;?) guarantees [to the original purchaser/ customer] that pipes and fittings sold by it are free of defects in materials or manufacture under normal conditions of use for a period of 25 years and in case of electrical and mechanical products for 1 year from the date of installation. This guarantee only applies to the products stored, installed, tested and operated in accordance with the fitting instructions issued by Uponor and valid at the time the products were installed. Where a claim is made during the guarantee period and products are proven to be defective in materials and/or manufacture at the time of delivery, Uponor will supply replacement products free of charge. This is the exclusive remedy under this guarantee. Uponor disclaims any warranty or guarantee not expressly provided for herein, including any implied warranties of merchantability or fitness for a particular purpose. Uponor further disclaims any and all responsibility or liability for losses, damages and expenses, including special, direct, indirect, incidental and consequential damages, whether foreseeable or not, including without limitation any loss of time or use or any inconvenience arising from the ownership, installation or use of the products sold hereunder. This guarantee does not affect the statutory rights of the consumer.

Copyright ÂŠ Uponor (Uponor Limited.) Reproduction of any part of this publication for any purpose is not permitted without the prior written permission of Uponor Limited. The contents of this brochure are provided for guideline only, please consult our technical manuals for full up-to-date information. Uponor reserves the right to alter specifications and operating parameters for all their Underfloor Heating and Plumbing & Heating Systems at any time as part of its policy of continuous product development. Care has been taken to ensure that the information in this price guide is correct at the time of going to press. Uponor Limited reserve the right to alter prices and the details of designs and performance of products without notice. E&OE.

UPG-Sept-2012-UK

Uponor Limited Head Office Gilmorton Road Lutterworth Leicestershire LE17 4DU

T F E W

01455 550355 01455 550366 enquiries.uk@uponor.com www.uponor.co.uk