Sinov ap1000 asterisk ippbx user manual

AP100 User Manual

SinoVoip AP1000 Hardware Development Platform User's Manual

1

www.sinovoip.com.cn

AP100 User Manual

AP1000_4FXO/FXS

AP1000_8FXO/FXS

AP1000_1 E1/T1

AP1000_2 E1/T1 2

www.sinovoip.com.cn

AP100 User Manual AP1000 is an ideal for small and medium hardware development platform, which is based on the integration of Asterisk IPPBX solutions, plug plate design by preclude the use of a modular, In a small chassis, it integrates a variety of communication interface imports, including analog access of imported FXO / FXS, digital access of imported E1 / T1.

AP1000 hardware development platform supports comprehensive protocol processing, which is installed in the Linux-based operating system, and completely open to the developers , developers on this platform is very easy to do secondary development, to provide more value-added services unique.

AP1000 hardware platform overall Introduction 1, AP1000 hardware platform is composed of three parts as embedded boards, bus adapter plate & Asterisk voice card .

Plug voice card

DC +12V VGA Power input

Ethernet

USB1

USB2

RS232

port1 Ethernet port 2

3

www.sinovoip.com.cn

AP100 User Manual

FXO/FXS 8th indicate Power LED

FXO/FXS 5th indicate

HDD indicator

FXO/FXS 6th indicate

light

FXO/FXS 1th indicate

FXO/FXS 2nd indicate

FXO/FXS 3rd indicate

FXO/FXS 4th indicate

4

www.sinovoip.com.cn

FXO/FXS 7th indicate

AP100 User Manual

The bus adapter plate

Hard dish

RAM

Voice card Embedded mainboard

5

www.sinovoip.com.cn

AP100 User Manual

Plug in and pull out guide rail

Voice card have 4kinds AP1000_4FXO/FXS

Plug in and pull out guide rail

AP1000_8FXO/FXS AP1000_1 E1/T1 AP1000_2 E1/T1

6

www.sinovoip.com.cn

AP100 User Manual

2、Embedded Motherboard Specifications

      

CPU Processor：Intel® Celeron® Processor 1037U (2M Cache, 1.80 GHz) RAM：2GB DDR3 SDRAM (Maxim can expand to 8GB) Hard dish capacity： 500G 2 USB2.0 connector 2 100Mbps Ethernet interface imports 1 VGA connector 1 232 serial port

7

www.sinovoip.com.cn

AP100 User Manual

AP1000_4FXO / FXS voice card introduction

1th connector 2nd connector

3rd connector

4th connector

1th module

2nd module

4th module 3rd module

1．

Support Quad FXO or FXS, and FXO and FXS can choose any combination ，red module is FXO, green module is FXS. 2． Driver layer totally compatible with Asterisk card, we can enjoy Rource code security and stability.

3． No need additional installation drivers, to avoid potential risks. Asterisk comes complete with DAHDI / Zaptel driver (wctdm24xxp driver, no need to install any patches 4． Support Linux, BSD operating system, CentOS, openSUSE, Fedora, Debian, Ubuntu, AstLinux, FreeBSD, OpenBSD. 5． Base on DMA read and write data on technology to support fast data transfer, significantly reducing the CPU usage of the computer.

6． Support codec A-Law, μ-Law, G.729, G.723, GSM, GSM, Speex, ADPCM format.

7. Using pluggable architecture, very easy to replace.

8. In order to prevent loosening during transport modules, each one module has a fixed column with base plate closely linked, very reliable.

8

www.sinovoip.com.cn

AP100 User Manual

Fixed leg

Fixed leg

Fixed leg

Fixed leg

9, After loading the drivers are OK, the front four LEDs L1, L2, L3, L4 is illuminated

9

www.sinovoip.com.cn

AP100 User Manual

AP1000_8FXO / FXS voice card introduction 4th module 3rd module 2nd module 1th module

1th connector 2nd connector 3rd connector 4th connector 8th module

5th connector 7th module 6th connector

7th connector

6th module 5th module

8th connector

1．Support eight FXO or FXS, and FXO and FXS can choose any combination, red module is FXO, green module is FXS. 2．Driver layer is fully compatible with Asterisk card, enjoy Rource code security and stability 3．No need additional installation drivers, to avoid potential risks. Asterisk comes complete with DAHDI / Zaptel driver (wctdm24xxp driver, no need to install any patches).

4．Support Linux, BSD operating system, CentOS, openSUSE, Fedora, Debian, Ubuntu, AstLinux, FreeBSD, OpenBSD. 5．Base on DMA read and write data on technology to support fast data transfer, significantly reducing the CPU usage of the computer.)

10

www.sinovoip.com.cn

AP100 User Manual 6 ． Supports A-Law, μ-Law, G.729, G.723, GSM, GSM, Speex Codec ADPCM format.

7．Using pluggable architecture, very easy to replace.

8．In order to prevent loosening during transport modules, each one module has a fixed column with base plate closely linked, very reliable.)

Fixed leg

Fixed leg

Fixed leg

Fixed leg

Fixed leg

Fixed leg

Fixed leg

Fixed leg

9, After loading the drive normal, positive eight LEDs L1, L2, L3, L4, L5, L6, L7, L8 lights up.

11

www.sinovoip.com.cn

AP100 User Manual

AP1000_1 E1 / T1 voice card introduction

Choose E1/T1 by Dial swith

1．It supports one E1 / T1 / J1 digital trunk lines, supporting SS7 (TUP / ISUP), PRI, R2 and other signaling.

2．Supports the industry-standard telephony and data protocols, including SS7 signaling VII, PPP, Cisco, HDLC, and Frame Relay data modes.

3 ． Driver layer is fully compatible with Asterisk card, we can enjoy Rource code security and stability.

4 ． No need additional installation drivers, to avoid potential risks. Asterisk comes completely DAHDI / Zaptel driver (wtc4xxxP driver, no need to install any patches 5．Support Linux, BSD operating system, CentOS, openSUSE, Fedora, Debian, Ubuntu, AstLinux, FreeBSD, OpenBSD.) 6 ． DMA read and write data on technology to support fast data transfer, significantly reducing the CPU usage of the computer.)

7．Support codec A-Law, μ-Law, G.729, G.723, GSM, GSM, Speex, ADPCM format.

8．Via PCB board dial switch to select E1 and T1 mode.

9．Using pluggable architecture, very easy to replace.

12

www.sinovoip.com.cn

AP100 User Manual

AP1000_2 E1 / T1 voice card introduction

Choose E1/T1 by Dial swith

1．Support second Road E1 / T1 / J1 digital trunk lines, supporting SS7 (TUP / ISUP), PRI, R2 and other signaling.） 2．Supports the industry-standard telephony and data protocols, including SS7 signaling VII, PPP, Cisco, HDLC, and Frame Relay data modes.） 3 ． Driver layer is fully compatible with Asterisk card, enjoy Rource code security and stability.

4 ． No need additional installation drivers, to avoid potential risks. Asterisk comes completely DAHDI / Zaptel driver (wtc4xxxP driver, no need to install any patches 4．Support Linux, BSD operating system, CentOS, openSUSE, Fedora, Debian, Ubuntu, AstLinux, FreeBSD, OpenBSD. 5．Base on DMA read and write data on technology to support fast data transfer, significantly reducing the CPU usage of the computer.） 6 ． upport codec A-Law, μ-Law, G.729, G.723, GSM, GSM, Speex, ADPCM format.

7．Via PCB board dial switch to select E1 and T1 mode.

8．Using pluggable architecture, very easy to replace.

13

www.sinovoip.com.cn

AP100 User Manual

AP1000 hardware development platform use method 1. AP1000 packaging, size 410mm X 430mm X 70mm

14

www.sinovoip.com.cn

AP100 User Manual

2, Open the packaging AP1000

Power line

AP1000 hardware

15

+12V DC adapter

www.sinovoip.com.cn

AP100 User Manual 3Different countries use different standard power supply, AP1000 offers two power lines, customer need to determine what kind before buying .

EU Power supply

China Standard power supply

16

www.sinovoip.com.cn

AP100 User Manual

4．1PCS DC+12V 6A Power adapter

5．Steps of install the system 1）Display via VGA interface to access AP1000.

2）USB keyboard via USB1 interface to access AP1000.

3）USB drive or U disk via USB2 interface to access AP1000.

4 ） AP1000 embedded motherboard uses the power easyable start, as long as a power plug adapter insert AP1000, AP1000 embedded motherboards will start up.

5）Embedded motherboards boot AP1000 hardware platform, there are three main ways, SATA hard drives, USB drives and U disk.

A) power plug adapter insert AP1000 hardware platform, press Del or Delete key immediately, the Del key in the bottom right corner of the keyboard, and some may use the delete key instead of this, as below After enter BIOS, default is Main (Main Menu)interface, as below

17

www.sinovoip.com.cn

AP100 User Manual

B) Then use left right keys to move the cursor to the BOOT this option to enter the interface shown in Figure:

18

www.sinovoip.com.cn

AP100 User Manual C) Hard Drive BBS priorities of the inserted hard disk detection options, press Enter to enter this sub-menu, such as inserting multiple hard drives, you can choose which specific hard disk boot.

D) USB Device BBS priorities of the inserted USB device detection options such as USB U disk, USB drive, USB other storage devices, Enter to enter this sub-menu, select the device you want to start. Show as below

19

www.sinovoip.com.cn

AP100 User Manual

E) BOOT Option # 1 first boot device BOOT Option # 2 second boot device BOOT Option # 3 The third boot device

20

www.sinovoip.com.cn

AP100 User Manual

F) After setting press F4 to save and exit. YES Enter.

6System Shutdown When the system is turned off by way of software, the screen went blank, Please be Noted, AP1000 hardware platform and not a total blackout, pluggable voice card can not be implemented at this time, it is necessary to dial down power plug adapter, AP1000 hardware platform was a total blackout, now can pluggable voice card (Charged pluggable voice card may be damaged AP1000 hardware platform).

21

www.sinovoip.com.cn

AP100 User Manual

Only after pull out power adapter, the power LED will offer, then AP1000 can totally power cut, and then plug and pull out the voice card (or it will damage AP1000

22

www.sinovoip.com.cn

AP100 User Manual For example: AP1000 hardware platform, insert a AP1000_2FXO + 2FXS voice card, install Elastix Here is dahdi_hardware, dahdi_scan tool detects results

dahdi_cfg Loading configuration

23

www.sinovoip.com.cn

AP100 User Manual The following channels was saw on dahdi show channels under asterisk cli. Different modules configured with different results, do not represent all configurations. For example 2FXO, 2FXS of channels

For example 4FXO channel

24

www.sinovoip.com.cn