V.08
LEDtape
LED Tape
LED TAPE MODELS TO SUIT A VARIETY OF INDOOR & OUTDOOR LIGHTING APPLICATIONS
One of the most versatile light sources, LED tape is easy to install, discreet & flexible. Aluminum profiles enhance appearance and improves heat dissipation.
Why Choose LED tape?
LED Technology
Transition from Old to New Technology
Color Options, Mounting and Controls
Solid state technology makes excellent accent lighting and can be used to supplement other accent lights. A versatile solution, it can also be installed for architectural highlighting of both indoor and outdoor applications. Traditionally, cold cathode lighting was used for these applications due to its low heat output and long life.
The ability for cold cathode to be used for creating shapes had made it especially popular for use in signage lighting. However, cold cathode has significant disadvantages, primarily its cost, driven by complex manufacturing and high labor requirements, and secondly, the lack of onsite flexibility for changes to meet building requirements.
1
LED tape light is a rapidly growing product category, with a wide range of lengths, colors and mounting options. It is a fantastic lighting tool that can be used to create contrast in almost any lighting application, including exterior building lighting, signage, domestic installations, offices, nightclubs, bars and cafes.
LED tape has very low power consumption with low maintenance, and a wide selection of color temperature options in warm white, white, blue and RGB, also controllable with dimmable driver options. We have a range of LED profiles and channels that will enhance any building’s aesthetics, substantially.
LED Tape - Range
LED Tape Bright
Super Bright
Ultra Bright
Bendable Bright
AR-ST901 pg. 3
AR-ST903 pg. 5
AR-ST588 pg. 7
AR-ST905 pg. 8
2.2W/ft
4.4W/ft
8.8W/ft
2.2W/ft
≤198lm/ft
≤427lm/ft
≤678lm/ft
≤198lm/ft
RGB
Bright
Bright
RGB
Standard
Standard
AR-ST324 pg. 9
AR-ST224 pg. 10
AR-ST324RGB pg. 11
AR-ST100 pg. 13
AR-ST100IP pg. 14
2.9W/ft
2.9W/ft
4.4W/ft
1.5W/ft
1.5W/ft
≤144lm/ft
≤165lm/ft
≤90lm/ft
≤72lm/ft
LED Tape Comparison Table Cat. No.
Voltage
Max [W] / ft - [W] / m
Max. Length of run
Distance between LED chips
Mounting
pg. No.
AR-ST901
24V DC
2.2W - 7.2W
32.8ft - 10m
0.67''
3M Self-Adhesive
3
AR-ST903
24V DC
4.4W - 14.4W
19.7ft - 6m
0.67''
3M Self-Adhesive
5
AR-ST588
24V DC
8.8W - 28.9W
19.7ft - 6m
0.67"
3M Self-Adhesive
7
AR-ST905
24V DC
2.2W - 7.2W
32.8ft - 10m
0.67''
3M Self-Adhesive
8
AR-ST324
12V DC
2.9W - 9.5W
32.8ft - 10m
0.3"
3M Self-Adhesive
9
AR-ST224
12V DC
2.9W - 9.5W
32.8ft - 10m
0.3"
3M Self-Adhesive
10
AR-ST324RGB
12V DC
4.4W - 14.4W
19.7ft - 6m
0.6"
3M Self-Adhesive
11
AR-ST100
12V DC
1.5W - 4.9W
32.8ft - 10m
0.6"
3M Self-Adhesive
13
AR-ST100IP
12V DC
1.5W - 4.9W
32.8ft - 10m
0.6"
3M Self-Adhesive
14
N.B. ALL LED TAPE IS NON RETURNABLE & DRIVER SOLD SEPARATELY
auroralighting.com
2
24V Bright 198lm/ft CRI>90 LED Tape Description 24V DC single color, flexible CRI>90 LED strip delivering up to 198lm per foot with self-adhesive backing (always apply to clean surfaces). Perfect for retail applications where higher color rendering is needed to distinguish and enhance certain colors. With a beam angle of 120° individual light points are less visible creating a continuous glow. This strip has cut points every 3.93" / 100mm for maximum flexibility what length is concerned. Maximum run of 32.8ft, any length over 32.8ft must be run in parallel. Very low power consumption of 2.2W/ft. A 24V DC Constant Voltage LED driver is required (see driver options table). Reel length 49ft / 15m. Dimmable with 0-10V and MLV dimmers, with the suitable Aurora offering. IES files available on the Aurora website. 3 year warranty.
0.31’’
Specification
0.08’’
IP Rating Technology
LED
No of LEDs /ft
23
Dimmable
Yes
Lifetime
AR-STPL101
30,000hrs
Color Rendering
CRI>90
Input Voltage
Sku Code
AR-STIL102
24V
Wattage/ft
Lumens/ft
Efficacy LL/CW
Color Temp (K)
AR-ST901/30
2.2W/ft
167lm
76
3000K
AR-ST901/40
2.2W/ft
183lm
83
4000K
AR-ST901/60
2.2W/ft
198lm
90
6000K
LED Strip
ORDER TO THE NEAREST FOOT
Sku Code
0.02’’
Dry Location
AR-STIL103
AR-STPL104
Description
Connectors AR-STPL101
12V / 24V 1' Tape Power Lead
AR-STIL102
12V / 24V 4" Tape Interconnection Lead
AR-STIL103
12V / 24V 1' Tape Interconnection Lead
AR-STPL104
12V / 24V 4" Tape Power Lead T-Connector
AU-ST001A
12V / 24V Single Color Strip Connector
Sku Code
Description
AU-ST001A
Feet per driver
LED Drivers 60W 24V DC Magnetic Dimmable LED Driver
27.2ft
NEW
AR-M60L24DC-AR
NEW
AR-M96L24DC-AR
96W 24V DC Magnetic Dimmable LED Driver
43.6ft**
AA-LED7024CVW
70W IP67 Constant Voltage Driver
31.8ft
AA-LED15024CVW
150W 24V IP65 Constant Voltage LED Driver
68.1ft**
AA-LEDD6024
60W 24V IP67 0-10V Dimmable LED Driver
22.7ft
AA-LED10024CVW
100W IP67 Constant Voltage Driver
45.4ft**
90.8ft** AA-LED20024CVW 200W 24V IP66 Constant Voltage LED Driver **For runs over 32.8ft / 10m individual lengths should be connected in parallel
3
FOR 24V DRIVERS SEE PGS. 17-18
FULLY DIMMABLE WITH MLV AND 0-10V DIMMERS
24V Bright 198lm/ft CRI>90 LED Tape
24V LED Tape
auroralighting.com
4
24V Super Bright 427lm/ft CRI>90 LED Tape Description 24V DC single color, flexible CRI>90 LED strip delivering up to 427lm per foot with self-adhesive backing (always apply to clean surfaces). Perfect for retail applications where higher color rendering is needed to distinguish and enhance certain colors. With a beam angle of 120° individual light points are less visible creating a continuous glow. This strip has cut points every 3.93" / 100mm for maximum flexibility what length is concerned. Maximum run of 19.7ft / 6m, any length over 19.7ft / 6m must be run in parallel. Low power consumption of 4.4W per foot. A 24V DC Constant Voltage LED driver is required (see driver options table). Reel length 22.9ft / 7m. Dimmable with 0-10V and MLV Dimmers with the suitable Aurora driver offering. IES files available on the Aurora website. 3 year warranty.
0.39’’
Specification
0.08’’
IP Rating
0.02’’
Dry Location
Technology
LED
No of LEDs /ft
18
Dimmable
Yes
Lifetime
AR-ST100A
30,000hrs
Color Rendering
CRI>90
Input Voltage
24V
AR-ST100B Sku Code
Wattage/ft
Lumens/ft
Efficacy LL/CW
Color Temp (K)
AR-ST903/30
4.4W/ft
366lm
83
3000K
AR-ST903/40
4.4W/ft
396lm
90
4000K
AR-ST903/60
4.4W/ft
427lm
97
6000K
LED Strip
ORDER TO THE NEAREST FOOT
Sku Code
Description
Connectors AR-ST100A
12V / 24V Single Color Tape Connector
AR-ST100B
12V / 24V Wired Connector - Single Color
Sku Code
Description
Feet per driver
LED Drivers NEW
AR-M60L24DC-AR
60W 24V DC Magnetic Dimmable LED Driver
13.6ft
NEW
AR-M96L24DC-AR
96W 24V DC Magnetic Dimmable LED Driver
21.8ft**
AA-LED7024CVW
70W IP67 Constant Voltage Driver
15ft
AA-LED15024CVW
150W 24V IP65 Constant Voltage LED Driver
34ft**
AA-LEDD6024
60W 24V IP67 0-10V Dimmable LED Driver
13.6ft
AA-LED10024CVW
100W IP67 Constant Voltage Driver
22.6ft**
AA-LED20024CVW
200W 24V IP66 Constant Voltage LED Driver
45ft**
**For runs over 19.7ft / 6m individual lengths should be connected in parallel
5
FOR 24V DRIVERS SEE PGS. 17-18
FULLY DIMMABLE WITH MLV AND 0-10V DIMMERS
24V Super Bright 427lm/ft CRI>90 LED Tape
24V LED Tape
auroralighting.com
6
24V Ultra Bright 678lm/ft LED Tape Description 24V DC single color, flexible LED tape with 3M self-adhesive tape for wet Locations (IP65). Distance between LEDs of 0.67'' / 17mm and cut points every 3 LED rows (1.97''/ 50mm). Requires 24V DC Constant Voltage LED driver. Multi-purpose LED tape that can be used for accent and architectural highlighting in both indoor and outdoor applications. Maximum run of 19.7ft / 6m, any length over 19.7ft / 6m must be run in parallel. A 24V DC Constant Voltage LED driver is required (see driver options table) Reel length 16ft / 4.8m. Dimmable with 0-10V and MLV Dimmers with the suitable Aurora driver offering. IES files available on the Aurora website. 3 year warranty.
0.74ʺ
Specification
0.23ʺ
IP Rating
Wet Location
Technology
LED
No of LEDs /ft
36
Dimmable
Yes
Lifetime
50,000hrs
Color Rendering
3M SELF-ADHESIVE
CRI>80
Input Voltage
Sku Code
RESIN COATED
24V
Wattage/ft
Lumens/ft
Efficacy LL/CW
Color Temp (K)
AR-ST588/27
8.8W/ft
616lm
70
2700K
AR-ST588/60
8.8W/ft
678lm
77
6000K
ORDER TO THE NEAREST FOOT
Sku Code
AR-ST588CK Kit includes:
- IP68 male & female connectors - Silicone end caps x 2 - Heat shrink sleeves x 2 - Silicone sealant tube x 1
Description
Accessories AR-ST588CK
AR-ST588 24V Connector Kit
Sku Code
Description
Feet per driver
LED Drivers NEW NEW
AR-M60L24DC-AR
60W 24V DC Magnetic Dimmable LED Driver
6.8ft
AR-M96L24DC-AR
96W 24V DC Magnetic Dimmable LED Driver
10.9ft
AA-LED7024CVW
70W IP67 Constant Voltage Driver
7ft
AA-LED15024CVW
150W 24V IP65 Constant Voltage LED Driver
17ft
AA-LEDD6024
60W 24V IP67 0-10V Dimmable LED Driver
6.8ft
AA-LED10024CVW
100W IP67 Constant Voltage Driver
11.3ft
AA-LED20024CVW
200W 24V IP66 Constant Voltage LED Driver
22ft**
**For runs over 19.7ft / 6m individual lengths should be connected in parallel
7
FOR 24V DRIVERS SEE PGS. 17-18
FULLY DIMMABLE WITH MLV AND 0-10V DIMMERS
24V Bendable Bright 198lm/ft CRI>90 LED Tape Bendable
Description 24V DC single color, bendable CRI>90 LED strip with self-adhesive backing (Always apply to clean surfaces). Perfect for retail applications where higher color rendering is needed to distinguish and enhance certain colors. With a beam angle of 120° individual light points are less visible creating a continuous glow. The strip has cut points every 3.93" / 100mm for maximum flexibility what length is concerned. Maximum run of 32.8ft / 10m, any length over 32.8ft / 10m must be run in parallel. Low power consumption of 2.2W per foot. A 24V DC Constant Voltage LED driver is required (see driver options table). Reel Length 49ft / 15m. Dimmable with 0-10V and MLV Dimmers with the suitable Aurora driver offering. IES files available on the Aurora website. 3 year warranty.
0.32”
Specification
0.08”
IP Rating
Dry Location
Technology
LED 18
Dimmable
Yes
Lifetime
AR-STPL101
30,000hrs
Color Rendering
CRI>90
Input Voltage
Sku Code
AR-STIL102
24V
Wattage/ft
Lumens/ft
Efficacy LL/CW
Color Temp (K)
AR-ST905/30
2.2W/ft
173lm
79
3000K
AR-ST905/40
2.2W/ft
183lm
83
4000K
198lm
90
6000K
LED Strip
AR-STIL103
AR-ST905/60 2.2W/ft ORDER TO THE NEAREST FOOT
Sku Code
24V LED Tape
No of LEDs /ft
AR-STPL104
Description
Connectors AR-STPL101
12V / 24V 1' Tape Power Lead
AR-STIL102
12V / 24V 4" Tape Interconnection Lead
AR-STIL103
12V / 24V 1' Tape Interconnection Lead
AR-STPL104
12V / 24V 4" Tape Power Lead T-Connector
AU-ST001A
12V / 24V Single Color Strip Connector
Sku Code
Description
AU-ST001A
Feet per driver
LED Drivers NEW
AR-M60L24DC-AR
60W 24V DC Magnetic Dimmable LED Driver
27.2ft
NEW
AR-M96L24DC-AR
96W 24V DC Magnetic Dimmable LED Driver
43.6ft**
AA-LED7024CVW
70W IP67 Constant Voltage Driver
31.8ft
AA-LED15024CVW
150W 24V IP65 Constant Voltage LED Driver
68.1ft**
AA-LEDD6024
60W 24V IP67 0-10V Dimmable LED Driver
22.7ft
AA-LED10024CVW
100W IP67 Constant Voltage Driver
45.4ft**
AA-LED20024CVW
200W 24V IP66 Constant Voltage LED Driver
90.8ft**
FOR 24V DRIVERS SEE PGS. 17-18
FULLY DIMMABLE WITH MLV AND 0-10V DIMMERS
**For runs over 32.8ft / 10m individual lengths should be connected in parallel
auroralighting.com
8
12V Bright (wet location) 144lm/ft LED Tape Description 12V DC single color, flexible LED tape with 3M self-adhesive tape. Distance between LEDs of 0.3'' / 8.3mm and cut point every 3 LEDs (0.98'' / 25mm). Very low power consumption of 2.9W per ft. Requires 12V DC Constant Voltage LED driver. Multi-purpose LED tape that can be used for accent and architectural highlighting in both indoor and outdoor applications. Maximum run of 32.8ft / 10m, any length over 32.8ft / 10m must be run in parallel. Low power consumption of 2.9W per foot. A 12V DC Constant Voltage LED driver is required (see driver options table). Reel Length 16ft / 4.87m. Dimmable with 0-10V and MLV Dimmers with the suitable Aurora driver offering. IES files available on the Aurora website. 3 year warranty.
0.47ʺ
Specification
0.2ʺ
IP Rating Technology
LED
No of LEDs /ft
36
Dimmable
Yes
Lifetime
RESIN COATED
30,000hrs
Color Rendering
CRI>80
Input Voltage
Sku Code
3M SELF-ADHESIVE
12V
Wattage/ft
Lumens/ft
Efficacy LL/CW
Color Temp (K)
LED Strip AR-ST324/27
2.9W/ft
145lm
50
2700K
AR-ST324/35
2.9W/ft
145lm
50
3500K
AR-ST324/65
2.9W/ft
145lm
50
6500K
AR-ST324BLU
2.9W/ft
54lm
19
Blue
AR-ST324CK Kit includes:
- 12V 1.64ft /0.5m Power leads x 2 - Silicone end caps x 2 - 12 x 45mm Heat shrink sleeves x 4 - Silicone sealant tube x 1 - 10 x 25 x 17mm Fixing clips x 20 - Fixing screws x 20
ORDER TO THE NEAREST FOOT
Sku Code
0.01ʺ
Wet Location
Description
Accessories AR-ST324CK
AR-ST324 Connector Kit
Sku Code
Description
Feet per driver
LED Drivers NEW
AR-M60L12DC-AR
60W 12V DC Magnetic Dimmable LED Driver
20.6ft
AA-LEDD3012
30W 12V IP67 0-10V Dimmable LED Driver
10ft
AA-LED6012CVW
60W 12V IP54 Constant Voltage LED Driver
20ft
AA-LEDD6012
50W 12V IP67 0-10V Dimmable LED Driver
17ft
AA-LED10012CVW
100W 12V IP67 Constant Voltage LED Driver
34ft**
AA-LED15012CVW
132W 12V IP67 Constant Voltage LED Driver
45ft**
**For runs over 32.8ft / 10m individual lengths should be connected in parallel
9
FOR 12V DRIVERS SEE PGS. 17-18
FULLY DIMMABLE WITH MLV AND 0-10V DIMMERS
12V Bright 165lm/ft LED Tape Description 12V DC high density single color flexible LED tape with 3M self-adhesive tape. Distance between LEDs of 0.3'' / 8.3mm and cut point every 3 LEDs (0.98'' / 25mm). Very low power consumption of 2.9W per ft. Requires 12V DC Constant Voltage LED driver. Ideal for fast installation into many applications including signs, displays and pelmets. Maximum run of 32.8ft / 10m, any length over 32.8ft / 10m must be run in parallel. Very low power consumption of 2.9W/ft. A 12V DC Constant Voltage LED driver is required (see driver options table). Reel length 16ft / 4.87m. Dimmable with 0-10V and MLV dimmers, with the suitable Aurora offering. IES files available on the Aurora website. 3 year warranty.
0.39ʺ
Specification
0.08ʺ
IP Rating Technology
LED 36
Dimmable
Yes
Lifetime
35,000hrs
Color Rendering
24V LED Tape 12V
No of LEDs /ft
3M SELF-ADHESIVE
CRI>80
Input Voltage
Sku Code
0.02ʺ
Dry Location
12V
Wattage/ft
Lumens/ft
Efficacy LL/CW
Color Temp (K)
AR-ST224/27
2.9W/ft
165lm
57
2700K
AR-ST224/35
2.9W/ft
165lm
57
3500K
AR-ST224/65
2.9W/ft
165lm
57
6500K
AR-ST100A
LED Strip
AR-ST100B
ORDER TO THE NEAREST FOOT
Sku Code
Description
Connectors AR-ST100A
12V / 24V Single Color Tape Connector
AR-ST100B
12V / 24V Wired Connector - Single Color
Sku Code
Description
Feet per driver
LED Drivers NEW
AR-M60L12DC-AR
60W 12V DC Magnetic Dimmable LED Driver
20.6ft
AA-LEDD3012
30W 12V IP67 0-10V Dimmable LED Driver
10ft
AA-LED6012CVW
60W 12V IP54 Constant Voltage LED Driver
20ft
AA-LEDD6012
50W 12V IP67 0-10V Dimmable LED Driver
17ft
AA-LED10012CVW
100W 12V IP67 Constant Voltage LED Driver
34ft**
AA-LED15012CVW
132W 12V IP67 Constant Voltage LED Driver
45ft**
FOR 12V DRIVERS SEE PGS. 17-18
FULLY DIMMABLE WITH MLV AND 0-10V DIMMERS
**For runs over 32.8ft / 10m individual lengths should be connected in parallel
auroralighting.com
10
12V RGB Color Changing (wet location) LED Tape Description 12V DC RGB color changing, flexible LED tape with 3M self-adhesive tape for Wet Locations (IP65). Single RGB LED chip allows programmable settings including static colors and color changing modes dependent on the control system used. Distance between LEDs of 0.6'' / 16.6mm and cut point every 3 LEDs (0.98'' / 25mm). Low power consumption of 4.4W per ft. Requires 12V DC Constant Voltage LED driver. Multi-purpose LED tape that can be used for accent and architectural highlighting in both indoor and outdoor applications. Maximum run of 19.7ft / 6m, any length over 19.7ft / 6m must be run in parallel. Low power consumption of 4.4W/ft. A 12V DC Constant Voltage LED driver is required (see driver options table). Reel length 16ft / 4.87m. IES files available on the Aurora website. 3 year warranty.
RGB
0.47ʺ
Specification
0.2ʺ
IP Rating Technology
LED
No of LEDs /ft
18
Dimmable
Yes
Lifetime
RESIN COATED
30,000hrs
Color Rendering
3M SELF-ADHESIVE
CRI>80
Input Voltage
Sku Code
12V
Wattage/ft
Lumens/ft
Efficacy LL/CW
Color Temp (K)
-
RGB
LED Strip AR-ST324RGB
4.4W/ft
-
AR-ST324RGBCK Kit includes:
- 12V 1.64ft / 0.5m Power leads x 2 - Silicone sealant tube x 1 - 100 x 25 x 17mm Fixing clips x 20 - Fixing screws x 20 - Silicone end caps x 2 - 20 x 45mm Heat shrink sleeves x 4
ORDER TO THE NEAREST FOOT
Sku Code
0.01ʺ
Wet Location
Description
Accessories AR-ST324RGBCK
AR-ST324RGB Connector Kit
Sku Code
Description
Feet per driver
LED Drivers AA-LEDD3012
30W 12V IP67 0-10V Dimmable LED Driver
6ft
AA-LED6012CVW
60W 12V IP54 Constant Voltage LED Driver
13ft
AA-LEDD6012
50W 12V IP67 0-10V Dimmable LED Driver
11ft
AA-LED10012CVW
100W 12V IP67 Constant Voltage LED Driver
22ft**
AA-LED15012CVW
132W 12V IP67 Constant Voltage LED Driver
30ft**
**For runs over 19.7ft / 6m individual lengths should be connected in parallel
11
FOR 12V DRIVERS SEE PGS. 17-18
12V RGB Control
12V LED Tape
AU-RGB1224A
RGB Controller Features
12V - 24V RGB Controller
nn Suitable for control of 12V or 24V DC RGB LED strip nn Output Wattage: 12V: <216W, 24V: <432W nn Precise touch color selection wheel nn 18 Preset color changing functions nn Adjustable brightness and color change speed nn Remote control with 66ft range (3 x AAA batteries required)
Description
V+
_
Cat. No.
+
120V AC
AU-RGB1224A
12V or 24V RGB Flexible Strip
LED Controller AU-RGB1224A
RGB Controller 12V or 24V RGB Flexible Strip
auroralighting.com
12
12V Standard 90lm/ft LED Tape Description 12V DC single color, flexible LED tape with 3M self-adhesive tape. Distance between LEDs of 0.6'' / 16.6mm and cut points every 3 LEDs (2.0'' / 50mm). Very low power consumption of 1.5W per ft. Requires 12V DC Constant Voltage LED driver. Multi-purpose LED tape that delivers discreet illumination with a small profile. Maximum run of 32.8ft / 10m, any length over 32.8ft / 10m must be run in parallel. Very low power consumption of 1.5W/ft. A 12V DC Constant Voltage LED driver is required (see driver options table). Reel length 16ft / 4.87m. Dimmable with 0-10V and MLV Dimmers with the suitable Aurora driver offering. IES files available on the Aurora website. 3 year warranty.
0.32ʺ
Specification
0.07ʺ
IP Rating Technology
LED
No of LEDs /ft
18
Dimmable
Yes
Lifetime
AR-STPL101
30,000hrs
Color Rendering
CRI >80
Input Voltage
Sku Code
AR-STIL102
12V
Wattage/ft
Lumens/ft
Efficacy LL/CW
Color Temp (K)
AR-ST100/27
1.5W/ft
90lm
60
2700K
AR-ST100/35
1.5W/ft
90lm
60
3500K
90lm
60
6500K
LED Strip
AR-STIL103
AR-ST100/65 1.5W/ft ORDER TO THE NEAREST FOOT
Sku Code
0.02ʺ
Dry Location
AR-STPL104
Description
Connectors AR-STPL101
12V / 24V 1' Tape Power Lead
AR-STIL102
12V / 24V 4" Tape Interconnection Lead
AR-STIL103
12V / 24V 1' Tape Interconnection Lead
AR-STPL104
12V / 24V 4" Tape Power Lead T-Connector
AU-ST001A
12V / 24V Single Color Strip Connector
Sku Code
Description
AU-ST001A
Feet per driver
LED Drivers NEW
AR-M60L12DC-AR
60W 12V DC Magnetic Dimmable LED Driver
40ft**
AA-LEDD3012
30W 12V IP67 0-10V Dimmable LED Driver
20ft
AA-LED6012CVW
60W 12V IP54 Constant Voltage LED Driver
40ft**
AA-LEDD6012
50W 12V IP67 0-10V Dimmable LED Driver
33ft
AA-LED10012CVW
100W 12V IP67 Constant Voltage LED Driver
66ft**
AA-LED15012CVW
132W 12V IP67 Constant Voltage LED Driver
88ft**
**For runs over 32.8ft / 10m individual lengths should be connected in parallel
13
FOR 12V DRIVERS SEE PGS. 17-18
FULLY DIMMABLE WITH MLV AND 0-10V DIMMERS
12V Standard (wet location) 72lm/ft LED Tape Description 12V DC single color, flexible LED tape with 3M self-adhesive tape for Wet Locations (IP65). Distance between LEDs of 0.6'' / 16.6mm and cut points every 3 LEDs (2.0'' / 50mm). Very low power consumption of 1.5W per ft. Multi-purpose LED tape that can be used for accent and architectural highlighting in both indoor and outdoor applications. Maximum run of 32.8ft / 10m, any length over 32.8ft / 10m must be run in parallel. Very low power consumption of 1.5W/ft. A 12V DC Constant Voltage LED driver is required (see driver options table). Reel length 16ft / 4.87m. Dimmable with 0-10V and MLV Dimmers with the suitable Aurora driver offering. IES files available on the Aurora website. 3 year warranty.
0.41ʺ
Specification
0.24ʺ
IP Rating Technology
LED 18
Dimmable
Yes
Lifetime
RESIN COATED
30,000hrs
Color Rendering
CRI>70
Input Voltage
3M SELF-ADHESIVE
12V
Wattage/ft
Lumens/ft
Efficacy LL/CW
Color Temp (K)
AR-ST100IPCK Kit includes:
LED Strip AR-ST100IP/27
1.5W/ft
73lm
49
2700K
AR-ST100IP/35
1.5W/ft
73lm
49
3500K
AR-ST100IP/65
1.5W/ft
73lm
49
6500K
AR-ST100IPBLU
1.5W/ft
27lm
18
Blue
ORDER TO THE NEAREST FOOT
Sku Code
12V LED Tape
No of LEDs /ft
Sku Code
0.01ʺ
Wet Location
- 12V 1.64ft / 0.5m Power leads x 2 - Silicone end caps x 2 - 12 x 45mm Heat shrink sleeves x 4 - Silicone sealant tube x 1 - 100 x 25 x 17mm Fixing clips x 20 - Fixing screws x 20
Description
Accessories AR-ST100IPCK
AR-ST100IP Connector Kit
Sku Code
Description
Feet per driver
LED Drivers NEW
AR-M60L12DC-AR
60W 12V DC Magnetic Dimmable LED Driver
40ft**
AA-LEDD3012
30W 12V IP67 0-10V Dimmable LED Driver
20ft
AA-LED6012CVW
60W 12V IP54 Constant Voltage LED Driver
40ft**
AA-LEDD6012
50W 12V IP67 0-10V Dimmable LED Driver
33ft
AA-LED10012CVW
100W 12V IP67 Constant Voltage LED Driver
66ft**
AA-LED15012CVW
132W 12V IP67 Constant Voltage LED Driver
88ft**
FOR 12V DRIVERS SEE PGS. 17-18
FULLY DIMMABLE WITH MLV AND 0-10V DIMMERS
**For runs over 32.8ft / 10m individual lengths should be connected in parallel
auroralighting.com
14
LED Profile Features
PROFILE WITH FROSTED LENS
nn Available with clear or frosted diffuser covers (order separately) nn Aluminum finish (anodized aluminum finish for AU-CH102 and AU-CH103) nn May be cut to length nn Aurora LED tape has adhesive backing to fix it in the profile nn Blank and cable entry end caps available nn See compatibility table below
AU-CH100
AU-CH101
Surface Profile
PROFILE WITH CLEAR LENS
Surface Profile AU-CH100 SHOWN WITH AU-CHPC1FR DIFFUSER COVER (ALL DIFFUSER COVERS SOLD SEPARATELY)
0.63"
0.44"
AU-CH102
0.24"
0.60" 0.44"
AU-CH103
Recessed Profile
Recessed Profile
0.47"
nn Aluminum profiles for mounting flexible or solid LED tapes nn Suitable for lighting furniture, stair treads, glass shelves, counter tops, accent lighting etc. nn Aluminum profile acts as a heatsink for the tape helping to preserve the LED life nn Recessed, surface and corner mount versions available nn 3.3ft standard lengths
0.87"
0.44"
0.47"
0.24"
0.87" 0.44"
0.60"
0.63"
AU-CH105
Corner Profile
Deep Profile
1.02"
" 60 0. 44" 0.
0.75"
1.02"
AU-CH104
0.47"
°
90
Recessed Profile
0.29"
1.81"
0.94"
0.94" 1.03"
0.94"
1.02"
0.96" 0.29"
AU-CHPC3FR
0.98"
Surface Profile
0.87"
0.75"
AU-CH107 0.94"
AU-CH106
0.94" 1.03"
AU-CHPC4FR
Aurora LED Profile / LED Tape Compatibility Cat.No.
AR-ST901 AR-ST903 AR-ST100 AR-ST100IP AR-ST101RGB
AR-ST224 AR-ST324 AR-ST324RGB AR-ST588
AU-CH100
ü
ü
ü
-
ü
ü
-
-
-
AU-CH101
ü
ü
ü
ü
ü
ü
-
-
-
AU-CH102
ü
ü
ü
-
ü
ü
-
-
-
AU-CH103
ü
ü
ü
ü
ü
ü
-
-
-
-
-
AU-CH104
ü
ü
ü
ü
ü
ü
-
AU-CH105
ü
ü
ü
ü
ü
ü
ü
ü
-
AU-CH106
-
-
-
-
-
-
-
-
ü
AU-CH107
-
-
-
-
-
-
-
-
ü
AU-CH105 diffuser requires securing with a silicon sealant (not included).
15
LED Profile
AU-CH105
AU-CH100
A U - CH100 1 Aluminum Profile
Profile
End Caps
AU-CH102*
Mounting Clip
+ AU-CHPC1CL 1
Length
Diffuser Cover
Length
Diffuser Cover With cable entry
AU-CH100* AU-CH101*
12V LED Tape
ORDERING EXAMPLE:
AU-CH101
Without cable entry
AU-CHC1
AU-CHC2
AU-CHC3
SEE TABLE BELOW FOR DETAILS
AU-CHPC1CL* (CLEAR) AU-CHPC1FR* (FROSTED)
AU-CH103* AU-CH104* AU-CH105*
AU-CHPC2FR* (FROSTED)
AU-CH106*
AU-CHPC3FR* (ROUND FROSTED) AU-CHPC4FR* (SQUARE FROSTED)
AU-CH107*
AU-CHPC5FR* (FROSTED)
Add suffix 1 for 3.28ft (1m) Length AU-CH105 Available with Frosted cover only
*
See table below for codes for End Caps with and without cable entry and Mounting Option End Cap
Mounting Option
Profile
Without Cable Entry
With Cable Entry
AU-CH100
AU-CH100EC1
AU-CH100EC2
Mounting Clip AU-CHC1
AU-CH101
AU-CH101EC1
AU-CH101EC2
AU-CHC1
AU-CH102
AU-CH102EC1
AU-CH102EC2
-
AU-CH103
AU-CH103EC1
AU-CH103EC2
-
AU-CH104
AU-CH104EC1
AU-CH104EC2
AU-CHC2
AU-CH105
AU-CH105EC1
AU-CH105EC2
-
AU-CH106
AU-CH1061EC1*
AU-CH1061EC2*
-
AU-CH106
AU-CH1062EC1**
AU-CH1062EC2**
AU-CHC3
AU-CH107 AU-CH107EC1 *For use with AU-CHPC3FR diffuser cover **For use with AU-CHPC4FR diffuser cover
AU-CH107EC2 AU-CHC3 *Specifications in this catalog are subject to change please refer to website auroralighting.com
auroralighting.com
16
Power - Constant Voltage LED Drivers
Description Aurora's new robust dimmable drivers are suitable for working with any standard MLV dimmer and are a great addition to the LED strip portfolio offering versatility and a proven dimming method. The new driver range includes a junction box enabling simple connection and a tidy installation. The range includes 60W at 12VDC, 60W and 96W at 24VDC. NEW
AR-M60L12DC-AR
NEW
TYPE
AR-M60L24DC-AR
NEW
Input Voltage
Output Voltage (VDC)
Nominal Power
AR-M96L24DC-AR 96W 24V DC Magnetic Dimmable LED Driver
60W 24V DC Magnetic Dimmable LED Driver
60W 12V DC Magnetic Dimmable LED Driver
Cat.No.
Features nn Dimmable with any standard MLV (Leading edge) dimmer nn Dual protection - primary and secondary auto-reset circuit breakers nn Two knock-outs one on each side nn Nema 3R Enclosure - Outdoor use nn 5 Year Warranty
Class
Line Current (Amp) at 120V Input
Max. Case Temp (°F)
Dimensions LxWxH
AR-M60L12DC-AR
MLV Dimming
120V
12V DC
60W
2
0.76
158
6.54 x 2.55 x 2.25"
AR-M60L24DC-AR
MLV Dimming
120V
24V DC
60W
2
0.95
158
6.54 x 2.55 x 2.25"
AR-M96L24DC-AR
MLV Dimming
120V
24V DC
96W
2
0.96
158
6.54 x 2.55 x 2.25"
REMOVABLE PANEL GIVING EASY ACCESS TO WIRING
TWO KNOCK-OUTS FOR WIRING ONE ON EACH SIDE
17
Power - Constant Voltage LED Drivers Features
AA-LEDD3012
nn For Constant Voltage LED lamps or fittings it is necessary to wire the circuit in parallel for constant voltage operation nn Overload, thermal and short circuit protection nn 1.0kV SURGE PROTECTION - EN 61547 nn 1-10V dimmable LED drivers nn Safety Compliance EN61347, UL8750, UL1310, UL1012 nn EMC Compliance EN 55015, EN 61000, EN 61547 nn 3 Year warranty
30W 12V IP67 0-10V Dimmable LED Driver
AA-LEDD6024
AA-LED6012CVW
AA-LED10012CVW
50W 12V IP67 0-10V Dimmable LED Driver
60W 24V IP67 0-10V Dimmable LED Driver
60W 12V IP54 Constant Voltage LED Driver
100W 12V IP67 Constant Voltage LED Driver
AA-LED15012CVW
AA-LED5024CVW
AA-LED15024CVW
AA-LED20024CVW
132W 12V IP67 Constant Voltage LED Driver
50W 24V IP67 Constant Voltage LED Driver
150W 24V IP65 Constant Voltage LED Driver
200W 24V IP66 Constant Voltage LED Driver
AA-LEDD6012
Cat.No. AA-LEDD3012
Type 0-10V Dimmable
Input Voltage Output Voltage Nominal (VDC) Power 100 - 277V
12V DC
30W
Line Current (Amp) at 120V Input
Max. Case Temp (°F)
Dimensions LxWxH
0.5
185
4.3 x 2.9 x 1.3"
AA-LEDD6012
0-10V Dimmable
100 - 277V
12V DC
50W
0.8
185
6.7 x 1.8 x 1.3"
AA-LEDD6024
0-10V Dimmable
100 - 277V
24V DC
60W
0.8
185
6.7 x 1.8 x 1.3"
AA-LED6012CVW
Non-Dimmable
100 - 277V
12V DC
60W
0.56
176
6.4 x 1.7 x 1.2"
AA-LED10012CVW
Non-Dimmable
100 - 277V
12V DC
100W
0.92
194
8.7 x 2.7 x 1.5"
AA-LED15012CVW
Non-Dimmable
100 - 277V
12V DC
132W
1.5
194
8.7 x 2.7 x 1.5"
AA-LED5024CVW
Non-Dimmable
100 - 300V
24V DC
50W
0.46
167
6.9 x 2.7 x 1.5"
AA-LED15024CVW
Non-Dimmable
100 - 277V
24V DC
150W
1.5
185
8.7 x 2.7 x 1.5"
AA-LED20024CVW
Non-Dimmable
100 - 277V
24V DC
200W
1.85
185
12.0 x 2.8 x 1.6"
auroralighting.com
18
Product Range
V.08
Dimmable LED Troffer
V.08
dimmable Generation 3.0 Dimmable Slimline LED Flat Panels
V.08
Low Profile LED Highbay
V.08
High Power Linear LED Highbays
V.08
Low Profile LED Highbay
V.08
Professional Lighting Fixtures
V.08
LED Retrofit Trims
V.08
Commercial Lighting Fixtures
V.08
Linear LED Baton
Pro Range
Esofit PLUS
TITAN
visit us.auroralighting.com USA Sales Aurora Lighting Inc 12035 34th St N, Suite 2, St Petersburg, FL 33716 Tel: 727 524 4270, Fax: 727 290 3914
Warranty:
auroralighting.com
For full warranty information please visit us.auroralighting.com/warranty
V.08: 09.01.17