Industrial Tools - Austral Bolts & Marine by australbolts

OUR CORPORATE PHILOSOPHY

Bordo International is synonymous with excellence in industrial cutting tools. Bordo’s head office is located in the Eastern suburbs of Melbourne and utilises a comprehensive distribution network throughout Australia. Founded in 1987, Bordo remains a 100% family-owned Australian company committed to our customers and the local community. Our mission is to provide a complete cutting tool range that is of a quality and reliability that exceeds our customers’ expectations and requirements; and a service level second-to-none in the market, reflecting our total commitment to excellence.

PRODUCTS

As Industrial Cutting Tool and Power Tool Accessory specialists, our extensive product range is one of the most comprehensive in the industry. Our continually expanding range of precision cutting tools ensures you need look no further for all your industrial cutting needs. All of our products have been carefully selected and determined to be the best quality of their kind in the world.

SERVICE

Bordo International is committed to working with our suppliers and customers to improve and expand our range of cutting tools and power tool accessories, whilst continuing to provide the highest levels of service. We are supported by a team of technical and production experts who ensure that all specialised tooling requirements are met to our customers’ exacting specifications.

VISION

The Bordo Quality Commitment exists throughout all levels of our company – products, service, vision. We source our products from the world’s finest manufacturers, maintaining our ‘quality without compromise’ ethos. Our commitment results in the most reliable and competitive package available – when you use our tools you can be assured you are getting the very best the world has to offer.

Bordo International Pty Ltd ABN 96 005 125 833 3 Kingston Park Court Scoresby Victoria 3179 Australia Telephone +61 3 9212 7000 Facsimile +61 3 9212 7070 Email info@bordo.com.au Web www.bordo.com.au

Buyer’s Guide 03/2012

Part No. 9910-CAT0312

Buyer’s Guide 03/2012

18193_InsideCover_OL.pdf

23/04/12

3:17 PM

CONDITIONS OF SALE DRILLS Jobber Drills Metric Jobber Drills Fractional Jobber Drills Gauge Jobber Drills Bulk Merchandisers Jobber Drills Clam Shell Jobber Drills Clam Shell Merchandisers Jobber Drills Sets Reduced Shank Drills Long Series Drills Extra Deep Hole Drills NEW Aircraft (Long Reach) Drills Colour Band Drills Stub Drills Panel Drills Centre Drills Spotting Drills Spot Weld Drills Spot Weld Drills Tungsten Carbide TiAlN Coated Glass & Tile Drills NEW Power-Hex Drill Adaptors Power-Hex Drills & Merchandiser Power-Hex Countersink Drills & Set NEW TCT Countersink Drills Morse Taper Shank Drills Morse Taper Sleeves Universal Drills Ceramic Tile Drills Diamond Mist Drills Step Drills – HSS NEW Step Drills – HSS-Co5 Spiral Flute TiN Coated NEW Superflex Drills Brad Point Drills – HSS Spade Bits NEW Spade Bits – Long Auger Drills Quad Max Cutters Power-Bore Drills Self Feeding Wood Bits MASONRY DRILLS AND CORE BITS Straight Shank Masonry Drills Colour Flute Masonry Drills SDS Multi-fit Drills SDS Plus DELTAGON Drills SDS Plus Drills NEW SDS Max DELTAGON Drills SDS Max Drills SDS Chisels SDS Multi-fit Core Bits Hyperdia Diamond Core Bits Drimond Diamond Core Bits Wetmond Diamond Core Bits Poly-Clic Shanks and Accessories Diamond Core Bit Dust Collection COUNTERSINKS Countersinks Counterbores Counterbore Drills TAPS AND DIES Hand Taps – Chrome Alloy Button Dies & Die Nuts – Chrome Alloy Tap and Die Sets – Chrome Alloy Hand & Machine Taps – HSS Spiral Flute & Spiral Point Taps – HSS-Co5 Colour Band Taps – HSSE-V3 HSS Tap Set NEW HSS Drill & Tap Set NEW HSSE-V3 Blue Band Drill & Tap Set HSS Tap Merchandisers Drill Taps Tap Wrenches & Button Die Holders NEW Ratchet Tap Wrench Screw Extractors

2 3 6 7 8 10 12 14 19 23 26 27 28 34 36 37 37 38 38 39 40 41 42 43 44 46 47 48 49 51 52 54 55 56 56 58 60 61 62 64 65 66 69 72 75 76 78 79 80 81 82 83 83 84 90 91 92 98 103 104 113 116 118 118 118 119 121 122 122 123

MILLING CUTTERS Slot Drills, Short & Long Slot Drills Ball Nose, Short & Long End Mills Multimills Toolbits REAMERS MTS Machine Hand Chucking Adjustable Hand, Taper Pin BURRS NEW Express Cut Radius Burr Express Cut Non-Ferrous Cut Express Cut Extended Shank NEW Burr Sets Burr Merchandisers HOLE SAWS Bi-Metal Hole Saws NEW Bi-Metal Hole Saws Kits NEW Bi-Metal Hole Saw Merchandisers Power-Hex Bi-Metal Hole Saws NEW RIPPER Carbide Tipped Hole Saws Brilliant Vacuum Brazed Diamond Hole Saws Remgrit Hole Saws Downlight Cutters Adjustable Tungsten Carbide Blade Hole Cutters Door Lock Installation Kit Mortice Chisel NEW Mandrels, Pilot Drills & Accessories Thinwall M42 Sheetmetal Hole Saws XP & XP2 Tungsten Carbide Cutters NEW Annular Cutters Chassis (Screw) Punches SAW BLADES NEW Hack Saw Blades RemGrit Hack Saw Blades Hack Saw Frames Air Saw Blades RemGrit Rod Saw Blades Reciprocating Saw Blades NEW Jig Saw Blades ACCESSORIES NEW Bordo Plus Screwdriver Insert Bits NEW Bordo Impact Screwdriver Insert Bits NEW Bordo Impact Nutsetters Bordo Standard Screwdriver Insert Bits Bordo Standard Screwdriver Insert Bits – Security Bordo Standard Screwdriver Power Bits Bordo Standard Nutsetters Adaptors and Bit Holders Bordo Standard Screwdriver Bits – Clam Shell NEW Bordo Plus Quick Change Holders Screwdriver Bit Sets Screwdriver Bit Merchandisers Dust Bowls Holesaw Drilling Templates Power-Hex Quick Change Adaptors & Extensions ABRASIVES Flap Discs Flap Wheels BRUSHWARE Cup Brushes Twist Knot Cup Brushes Crimped Wire Wheel Brushes Twist Knot Wheel Brushes Crimped Wire Brass Coated Brushes Nylongrit Brushes Scratch Brushes & Accessories Polishing Mops Polishing Compounds Spindles Brushware Plan-a-grams TECHNICAL RETURNS PROCEDURES

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 1

WWW.BORDO.COM.AU

124 128 130 133 134 136 137 138 138 139 140 140 144 145 146 148 150 152 155 156 158 160 161 163 164 165 165 166 168 169 172 175 176 177 178 179 179 180 182 188 190 190 192 194 195 196 197 198 200 201 202 206 206 207 208 209 212 212 213 213 214 215 216 217 217 217 218 220 232

PAGE 001 21/04/12 6:17 PM

CONDITIONS OF SALE CONDITIONS OF SALE Effective March 2012 1 2

PRICES: All prices quoted exclude GST and are subject to change without notice. Export shipments are not subject to GST. All prices quoted in Australian Dollars unless otherwise stated. FREIGHT TERMS: Bordo International Pty Ltd (“Bordo”) has no minimum invoice value. All orders over $250 nett exclusive of GST are freight-free — prices are ex-warehouse. Bordo reserves the right to despatch freight-free orders by a carrier and method of its choosing. Freight-free orders are calculated on a $250 nett exclusive of GST basis per order for each warehouse dispatch. Drop-shipments incur freight charges. Where the order is under $250 nett exclusive of GST the customer is responsible for all costs associated with delivery. Any period for delivery of goods stated by Bordo is an estimate only and not a contractual commitment. Bordo will use its reasonable endeavours to meet any estimated dates for delivery of the goods but will not be liable for any loss or damage suffered by the customer or any third party for failure to meet an estimated date. The customer indemnifies Bordo against any loss or damage suffered by Bordo, its sub contractors or employees as a result of delivery, except where the customer is a “consumer” as defined in the Australian Consumer Schedule of the Competition and Consumer Act 2010 (Cth) as amended (“ACL”) and Bordo has not used due care and skill. 3. PAYMENT TERMS: Unless otherwise agreed in writing payment for the goods or services must be made in full within 30 days from the end of the month of the date of Bordo’s invoice. Bordo reserves the right to require payment in full on delivery of the goods. Payment by cheque is not deemed made until the proceeds of the cheque have cleared. Payment terms may be revoked or amended at Bordo’s sole discretion immediately upon giving the customer written or verbal notice. The time for payment is of the essence. 4. DAMAGE, DEFECTS AND LOSS IN TRANSIT: Bordo will not be liable for any shortages or non compliance with the specifications in these Terms and Conditions unless the customer notifies Bordo with full details and description within 10 working days of delivery to the customer. Where any shortages, claim for damaged goods or non compliance with the agreement specifications is accepted by Bordo, Bordo may, at its option, repair or replace the goods or refund or credit the portion of the purchase price. Bordo will not under any circumstances accept goods for return that have been specifically produced, imported or acquired to fulfil the agreement, that are discontinued goods or no longer stocked by Bordo, that have been altered in any way, that have been used, or that are not in their original condition and packaging. If the customer is a consumer, nothing in this clause limits any remedy available for a failure of the statutory guarantees in the ACL. 5. CREDIT INFORMATION: 5.1. Bordo may seek consumer credit information (section 18K(1)(b), Privacy Act 1988). If Bordo considers it relevant to assessing the customer’s application for commercial credit. The customer agrees to Bordo obtaining from a credit reporting agency a credit report containing personal credit information about the customer and to conducting a search of the Personal Property Securities Register for the purpose of assessing the customer’s application for commercial credit. 5.2. Exchanging information with other credit providers (Section 18N(1)(b), Privacy Act 1988). The customer agrees to Bordo obtaining personal information about the customer from other credit providers whose names the customer may have provided for Bordo or that may be named in a credit report, and from the Personal Property Securities Register, for the purpose of assessing the customer’s application for commercial credit. 5.3. Agreement to a credit provider being given a consumer credit report to collect overdue payments on commercial credit (Section 18K(1)(h) Privacy Act 1988). The customer agrees that Bordo may obtain a consumer credit report about the customer from a credit reporting agency for the purpose of collecting overdue payments relating to commercial credit owed by the customer. 6. RETENTION OF TITLE: 6.1 Until Bordo receives full payment in cleared funds for all goods supplied by it to the customer, as well as all other amounts owing to Bordo by the customer: (a) title and property in all goods remains vested in Bordo and does not pass to the customer; (b) the customer must hold the goods as fiduciary bailee and agent for Bordo; (c) the customer must keep the goods separate from its own goods and maintain Bordo’s labelling and packaging; (d) the customer must hold the proceeds of sale of the goods on trust for Bordo in a separate account with a bank to whom the customer has not given security however failure to do so will not affect the customer’s obligation as trustee; (e) in addition to its rights under the Personal Property Securities Act 2009 (Cth) (“PPSA”), Bordo may without notice, enter any premises where it suspects the goods are and remove them, notwithstanding that they may have been attached to other goods not the property of Bordo, and for this purpose the customer irrevocably licences Bordo to enter such premises and also indemnifies Bordo from and against all costs, claims, demands or actions by any party arising from such action. 6.2 The customer warrants that it is not at the time of placing an order for goods or services insolvent and knows of no circumstances which would entitle any creditor to appoint a receiver or to petition for winding up or to exercise any other rights over or against its assets. 6.3 If any of these retention of title provisions are construed to be invalid or not enforceable in accordance with their terms all other provisions which are self-sustaining and capable of separate enforcement without regard to the invalid provisions shall be and continue to be valid and enforceable in accordance with their terms. 7. PERSONAL PROPERTY SECURITIES ACT: 7.1. Notwithstanding anything to the contrary contained in these Terms and Conditions, the PPSA applies to these Terms and Conditions. 7.2. For the purposes of the PPSA: (a) terms used in this clause 7 that are defined in the PPSA have the same meaning as in the PPSA; (b) these Terms and Conditions are a security agreement and Bordo has a Purchase Money Security Interest in all present and future goods supplied by Bordo to the customer and the proceeds of the goods; (c) the security interest is a continuing interest irrespective of whether there are monies or obligation owing by the customer at any particular time; and (d) the customer must do whatever is necessary in order to give a valid security interest over the goods and their proceeds which is able to be registered by Bordo on the Personal Property Securities Register. 7.3. The security interest arising under this clause 7 attaches to the goods when the goods are collected or dispatched from Bordo’s premises and not at any later time. 7.4. Where permitted by the PPSA, the customer waives any rights to receive the notifications, verifications, disclosures or other documentation specified under sections 95, 118, 121(4), 130, 132(3)(d), 132(4), 135 and 157 of the PPSA. 7.5. Bordo and the customer agree to contract out of and nothing in the provisions of sections 96, 125, 129, 142 and 143 of the PPSA will apply to these Terms and Conditions. 7.6. To the extent permitted by the PPSA, the customer agrees that: (a) the provisions of Chapter 4 of the PPSA which are for the benefit of the customer or which place obligations on Bordo will apply only to the extent that they are mandatory or Bordo agrees to their application in writing; and (b) where Bordo has rights in addition to those in Chapter 4 of the PPSA, those rights will continue and apply. 7.7. The customer must immediately upon Bordo’s request: (a) do all things and execute all documents necessary to give effect to the security interest created under these Terms and Conditions; and (b) procure from any person considered by Bordo to be relevant to its security position such agreements and waivers (including as equivalent to those above) as Bordo may at any time require. 7.8. Bordo may allocate amounts received from the customer in any manner Bordo determines, including in any manner required to preserve any Purchase Money Security Interest it has in goods supplied by Bordo. 8. CREDITS/RETURNS: Except to the extent of any liability imposed by the ACL, authorisation must be obtained before returning goods for credit. No goods will be accepted for credit that are correctly supplied and invoiced if not returned freight paid within 14 days and delivery freight will be charged. Also a 15% restocking fee will be charged for any goods supplied correctly. Goods forwarded in error will be replaced no charge freight paid. Goods incorrectly sent must be held by the customer pending our further instruction. 9. LIABILITY: 9.1 Except as these Terms and Conditions specifically state, these Terms and Conditions do not include by implication any other term, condition or warranty in respect of the quality, merchantability, acceptability, fitness for purpose, condition, description, assembly, manufacture, design or performance of the goods or services or any contractual remedy for their failure. 9.2. If the customer is a consumer nothing in these Terms and Conditions restricts, limits or modifies the customer’s rights or remedies against Bordo for failure of a statutory guarantee under the ACL. 9.3. If the customer on-supplies the goods to a consumer: (a) if the goods or services are not of a kind ordinarily acquired for personal, domestic or household use or consumption, then the amount specified in section 276A(1) of the ACL is the absolute limit of Bordo’s liability to the customer; (b) if the goods are of a kind ordinarily acquired for personal, domestic of household use or consumption, then payment of any amount required under section 274 of the ACL is the absolute limit of Bordo’s liability to the customer howsoever arising under or in connection with the sale, installation, use of, storage or any other dealings with the goods by the customer or any third party. 9.4. If clause 9.2 or 9.3 does not apply, then other than as stated in these Terms and Conditions Bordo is not liable to the customer in any way howsoever arising under or in connection with the sale, installation, use of, storage or any other dealings with the goods or services by the customer or any third party. 9.5. Bordo is not liable for any indirect or consequential losses or expenses suffered by the customer or any third party, howsoever caused, including but not limited to loss of turnover, profits, business or goodwill or any liability to any other party, except to the extent of any liability imposed by the ACL. 9.6. The customer acknowledges that: (a) it has not relied on any service involving skill and judgement, or on any advice, recommendation, information or assistance provided by Bordo in relation to the goods or their use or application; (b) it has not made known, either expressly or by implication, to Bordo any purpose for which it requires the goods and it has the sole responsibility of satisfying itself that the goods are suitable for the use of the customer. 9.7. Nothing in these Terms and Conditions is to be interpreted as excluding, restricting or modifying the application of any State or Federal legislation applicable to the sale of goods which cannot be so excluded, restricted or modified. 10. TRADING TERMS AND CONDITIONS: Are subject to change without notice. Trading terms and conditions appear on the Account Application Form, our web site, or are available on request.

FUTURE UPDATES Bordo International Pty Ltd’s trading terms and conditions and any amendments or additions to these terms can be found on our website (www.bordo.com.au). DISCLAIMER Whilst every effort has been made to ensure the accuracy of the information contained herein, Bordo International Pty Ltd accepts no liability for any loss or damage either direct or consequential arising out of, or in relation to, the use or application of the said information or products referred to herein. All information is believed to be correct at time of printing. E.&O.E. © Copyright 2012 Bordo International Pty Ltd ABN 96 005 125 833. This publication is copyright. Other than for the purposes of, and under the conditions prescribed under, the copyright act no part of this publication may in any form or by any means be reproduced, stored in a retrieval system or transmitted without prior written permission of Bordo International Pty Ltd.

PAGE 002

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 2

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:17 PM

DRILLS JOBBER METRIC BULK

GROUP SURFACE FINISH MATERIAL POINT-TYPE FLUTE TYPE PACKAGING

JOBB BRIGHT HSS 118º SPLIT POINT* 30º HELIX BULK

JOBB BLACK HSS 118º SPLIT POINT* 30º HELIX BULK

JOBB BRONZE HSS-Co5 135º SPLIT POINT 30º HELIX BULK

DIA MM 0.30 0.35 0.38 0.40 0.45 0.50 0.55 0.60 0.65 0.70 0.75 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 1.20 1.25 1.30 1.35 1.40 1.45 1.50 1.55 1.60 1.65 1.70 1.75 1.80 1.85 1.90 1.95 2.00 2.05 2.10 2.15 2.20 2.25 2.30 2.35 2.40 2.45 2.50 2.55 2.60 2.65 2.70 2.75 2.80 2.85 2.90

PACK $ PART $ PART $ FL OAL QTY EACH NUMBER EACH NUMBER EACH MM MM 13.29 – – 4 19 10 2007-0.30 – 8.87 – – 4 19 10 2007-0.35 – 11.98 – – 4 19 10 2007-0.38 – 8.63 – – 5 20 10 2007-0.40 – 8.63 – – 5 20 10 2007-0.45 – 8.63 – – 6 22 10 2007-0.50 – 8.63 – – 7 24 10 2007-0.55 – 8.63 – – 7 24 10 2007-0.60 – 8.63 – – 8 26 10 2007-0.65 – 8.63 – – 9 28 10 2007-0.70 – 8.63 – – 9 28 10 2007-0.75 – 5.52 – – 10 30 10 2007-0.80 – 5.52 – – 10 30 10 2007-0.85 – 5.52 – – 11 32 10 2007-0.90 – 5.52 – – 11 32 10 2007-0.95 – 3.49 3.49 6.06 12 34 10 2007-1.00 2003-1.00 – 3.49 – 12 34 10 – 2003-1.05 3.63 3.63 – 14 36 10 2007-1.10 2003-1.10 – 3.63 – 14 36 10 – 2003-1.15 3.63 3.63 – 16 38 10 2007-1.20 2003-1.20 3.63 3.63 – 16 38 10 2007-1.25 2003-1.25 3.63 3.63 – 16 38 10 2007-1.30 2003-1.30 – 3.63 – 18 40 10 – 2003-1.35 3.63 3.63 – 18 40 10 2007-1.40 2003-1.40 – 3.63 – 18 40 10 – 2003-1.45 2.93 2.93 6.06 18 40 10 2007-1.50 2003-1.50 – 2.93 – 20 43 10 – 2003-1.55 2.73 2.73 – 20 43 10 2007-1.60 2003-1.60 – 3.24 – 20 43 10 – 2003-1.65 2.73 2.73 – 20 43 10 2007-1.70 2003-1.70 2.73 2.73 – 22 46 10 2007-1.75 2003-1.75 2.73 2.73 – 2007-1.80 2003-1.80 22 46 10 – 3.24 – 22 46 10 – 2003-1.85 2.73 2.73 – 22 46 10 2007-1.90 2003-1.90 – 3.24 – 24 49 10 – 2003-1.95 2.69 2.69 6.06 24 49 10 2007-2.00 2003-2.00 – 3.20 – 24 49 10 – 2003-2.05 2.86 2.86 – 24 49 10 2007-2.10 2003-2.10 – 3.40 – 27 53 10 – 2003-2.15 2.86 2.86 – 27 53 10 2007-2.20 2003-2.20 2.86 2.86 – 27 53 10 2007-2.25 2003-2.25 2.86 2.86 – 27 53 10 2007-2.30 2003-2.30 – 3.40 – 27 53 10 – 2003-2.35 2.86 2.86 – 30 57 10 2007-2.40 2003-2.40 – 3.40 – 30 57 10 – 2003-2.45 2.86 2.86 6.06 30 57 10 2007-2.50 2003-2.50 – 3.40 – 30 57 10 – 2003-2.55 2.86 2.86 – 30 57 10 2007-2.60 2003-2.60 – 3.40 – 30 57 10 – 2003-2.65 2.86 2.86 – 33 61 10 2007-2.70 2003-2.70 2.86 2.86 – 33 61 10 2007-2.75 2003-2.75 2.86 2.86 – 33 61 10 2007-2.80 2003-2.80 – 3.40 – 33 61 10 – 2003-2.85 2.86 2.86 – 33 61 10 2007-2.90 2003-2.90 * Some older stock may be 118º standard chisel point. All sizes 3.4mm and 1/8" and below are 118º standard chisel point.

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 3

PART NUMBER – – – – – – – – – – – – – – – 2011-1.00 – – – – – – – – – 2011-1.50 – – – – – – – – – 2011-2.00 – – – – – – – – – 2011-2.50 – – – – – – – –

JOBB BLACK HSS 118º CHISEL POINT 30º HELIX BULK $ EACH – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –

PART NUMBER – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –

WWW.BORDO.COM.AU

DRILL BIT SURFACE TREATMENT BRIGHT FINISH A bright finish tool has no surface treatment and is supplied in the as-ground condition. These tools are suitable for general purpose use, particularly for non-ferrous applications. BLACK FINISH (also called blue finish) A black finish is achieved by steam tempering, a thermal process resulting in a porous tool coating. This surface helps to keep lubricant on the tool, particularly important on the cutting edges, thus reducing friction and cold welding. The result is increased tool life. Black finish tools are generally recommended for ferrous applications where the oxide layer aids chip flow and heat dissipation. BRONZE FINISH (gold oxide) This metallic brown coloured low temperature temper treatment is normally only used on cobalt tools for identification purposes. Cobalt HSS drills are extremely hard and provide superior performance and increased tool life especially in stainless steel and high tensile steel.

COLOUR BAND SERIES Drills & Taps designed for optimum machining efficiency in specific materials PAGE

PAGE 003 21/04/12 6:17 PM

DRILLS JOBBER METRIC BULK

METRIC JOBBER DRILLS

DIN338 118º

140º–145º

118º Split Point (crankshaft point) Split point is self centering and reduces need for end thrust. Friction at workpiece is reduced. 118º point angles are ideal for use in materials such as mild steel and cast iron. The 118º point creates easily controlled chips which are wide and thin.

135º

140º–145º

135º Split Point (crankshaft point) Split point is self centering and the short distance from the drill axis to the outer corners results in faster penetration, reducing end thrust. The 135º point should be used to cut harder steel materials especially in deep hole applications. In these situations it will produce thicker chips minimising work hardening of the cavity. Faster penetration reduces abrasion and friction along the cutting edges.

PAGE 004

GROUP SURFACE FINISH MATERIAL POINT-TYPE FLUTE TYPE PACKAGING DIA MM 2.95 3.00 3.10 3.20 3.26 3.30 3.40 3.50 3.60 3.70 3.80 3.90 4.00 4.10 4.20 4.30 4.40 4.50 4.60 4.70 4.80 4.90 5.00 5.10 5.20 5.30 5.40 5.50 5.60 5.70 5.80 5.90 6.00 6.10 6.20 6.30 6.40 6.50 6.60 6.70 6.80 6.90 7.00 7.10 7.20 7.30 7.40 7.50 7.60 7.70 7.80 7.90 8.00 8.10

FL MM 33 33 36 36 36 36 39 39 39 39 43 43 43 43 43 47 47 47 47 47 52 52 52 52 52 52 57 57 57 57 57 57 57 63 63 63 63 63 63 63 69 69 69 69 69 69 69 69 75 75 75 75 75 75

OAL MM 61 61 65 65 65 65 70 70 70 70 75 75 75 75 75 80 80 80 80 80 86 86 86 86 86 86 93 93 93 93 93 93 93 101 101 101 101 101 101 101 109 109 109 109 109 109 109 109 117 117 117 117 117 117

PACK QTY 10 10 10 12 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 4

JOBB BRIGHT HSS 118º SPLIT POINT* 30º HELIX BULK

JOBB BLACK HSS 118º SPLIT POINT* 30º HELIX BULK

$ EACH – 2.60 3.00 3.00 4.82 3.00 3.00 3.00 3.37 3.37 3.37 3.37 3.37 3.76 3.76 3.76 3.76 3.76 4.03 4.03 4.03 4.03 4.18 5.45 5.45 5.45 5.45 5.45 5.57 5.57 5.57 5.57 5.57 6.49 6.49 6.49 6.49 6.49 7.92 7.92 7.92 7.92 8.30 8.30 8.30 8.30 8.30 8.30 9.47 9.47 9.47 9.47 9.47 10.25

$ EACH 3.40 2.60 3.00 3.00 – 3.00 3.00 3.00 3.37 3.37 3.37 3.37 3.37 3.76 3.76 3.76 3.76 3.76 4.03 4.03 4.03 4.03 4.18 5.45 5.45 5.45 5.45 5.45 5.57 5.57 5.57 5.57 5.57 6.49 6.49 6.49 6.49 6.49 7.92 7.92 7.92 7.92 8.30 8.30 8.30 8.30 8.30 8.30 9.47 9.47 9.47 9.47 9.47 10.25

PART NUMBER – 2007-3.00 2007-3.10 2007-3.20 2013-30 2007-3.30 2007-3.40 2007-3.50 2007-3.60 2007-3.70 2007-3.80 2007-3.90 2007-4.00 2007-4.10 2007-4.20 2007-4.30 2007-4.40 2007-4.50 2007-4.60 2007-4.70 2007-4.80 2007-4.90 2007-5.00 2007-5.10 2007-5.20 2007-5.30 2007-5.40 2007-5.50 2007-5.60 2007-5.70 2007-5.80 2007-5.90 2007-6.00 2007-6.10 2007-6.20 2007-6.30 2007-6.40 2007-6.50 2007-6.60 2007-6.70 2007-6.80 2007-6.90 2007-7.00 2007-7.10 2007-7.20 2007-7.30 2007-7.40 2007-7.50 2007-7.60 2007-7.70 2007-7.80 2007-7.90 2007-8.00 2007-8.10

PART NUMBER 2003-2.95 2003-3.00 2003-3.10 2003-3.20 – 2003-3.30 2003-3.40 2003-3.50 2003-3.60 2003-3.70 2003-3.80 2003-3.90 2003-4.00 2003-4.10 2003-4.20 2003-4.30 2003-4.40 2003-4.50 2003-4.60 2003-4.70 2003-4.80 2003-4.90 2003-5.00 2003-5.10 2003-5.20 2003-5.30 2003-5.40 2003-5.50 2003-5.60 2003-5.70 2003-5.80 2003-5.90 2003-6.00 2003-6.10 2003-6.20 2003-6.30 2003-6.40 2003-6.50 2003-6.60 2003-6.70 2003-6.80 2003-6.90 2003-7.00 2003-7.10 2003-7.20 2003-7.30 2003-7.40 2003-7.50 2003-7.60 2003-7.70 2003-7.80 2003-7.90 2003-8.00 2003-8.10

JOBB BRONZE HSS-Co5 135º SPLIT POINT 30º HELIX BULK $ EACH – 6.06 – – – – – 6.85 – – – – 7.48 – – – – 8.57 – – – – 9.76 – – – – 11.22 – – – – 13.19 – – – – 15.04 – – – – 16.51 – – – – 17.65 – – – – 20.59 –

PART NUMBER – 2011-3.00 – – – – – 2011-3.50 – – – – 2011-4.00 – – – – 2011-4.50 – – – – 2011-5.00 – – – – 2011-5.50 – – – – 2011-6.00 – – – – 2011-6.50 – – – – 2011-7.00 – – – – 2011-7.50 – – – – 2011-8.00 –

JOBB BLACK HSS 118º CHISEL POINT 30º HELIX BULK $ EACH – – 3.00 – – 3.00 – 3.00 – – – – 3.37 – 3.76 – – 3.76 4.03 – 4.03 – 4.18 5.45 – – – 5.45 – – – – 5.57 – – – – 6.49 – – 7.92 – 8.30 – – – – 8.30 – – – – 9.47 –

PART NUMBER – – 2008-3.10 – – 2008-3.30 – 2008-3.50 – – – – 2008-4.00 – 2008-4.20 – – 2008-4.50 2008-4.60 – 2008-4.80 – 2008-5.00 2008-5.10 – – – 2008-5.50 – – – – 2008-6.00 – – – – 2008-6.50 – – 2008-6.80 – 2008-7.00 – – – – 2008-7.50 – – – – 2008-8.00 –

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:17 PM

DRILLS JOBBER METRIC BULK

GROUP SURFACE FINISH MATERIAL POINT-TYPE FLUTE TYPE PACKAGING DIA MM 8.20 8.30 8.40 8.50 8.60 8.70 8.80 8.90 9.00 9.10 9.20 9.30 9.40 9.50 9.60 9.70 9.80 9.90 10.00 10.10 10.20 10.30 10.40 10.50 10.60 10.70 10.80 10.90 11.00 11.10 11.20 11.30 11.40 11.50 11.60 11.70 11.80 11.90 12.00 12.10 12.20 12.30 12.40 12.50 12.60 12.70 12.80 12.90 13.00

FL MM 75 75 75 75 81 81 81 81 81 81 81 81 81 81 81 87 87 87 87 87 87 87 87 87 87 94 94 94 94 94 94 94 94 94 94 94 94 101 101 101 101 101 101 101 101 101 101 101 101

OAL MM 117 117 117 117 125 125 125 125 125 125 125 125 125 125 125 133 133 133 133 133 133 133 133 133 133 142 142 142 142 142 142 142 142 142 142 142 142 151 151 151 151 151 151 151 151 151 151 151 151

PACK QTY 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

JOBB BRIGHT HSS 118º SPLIT POINT* 30º HELIX BULK

JOBB BLACK HSS 118º SPLIT POINT* 30º HELIX BULK

$ EACH 10.25 10.25 10.25 10.25 11.49 11.49 11.49 11.49 11.49 12.56 12.56 12.56 12.56 12.56 13.38 13.38 13.38 13.38 13.38 16.82 16.82 16.82 16.82 16.46 22.23 22.23 22.23 22.23 19.14 23.83 23.83 23.83 23.83 20.53 26.53 26.53 26.53 26.53 22.85 29.09 29.09 29.09 29.09 25.05 30.03 30.03 30.03 30.03 25.86

PART NUMBER 2007-8.20 2007-8.30 2007-8.40 2007-8.50 2007-8.60 2007-8.70 2007-8.80 2007-8.90 2007-9.00 2007-9.10 2007-9.20 2007-9.30 2007-9.40 2007-9.50 2007-9.60 2007-9.70 2007-9.80 2007-9.90 2007-10.00 2007-10.10 2007-10.20 2007-10.30 2007-10.40 2007-10.50 2007-10.60 2007-10.70 2007-10.80 2007-10.90 2007-11.00 2007-11.10 2007-11.20 2007-11.30 2007-11.40 2007-11.50 2007-11.60 2007-11.70 2007-11.80 2007-11.90 2007-12.00 2007-12.10 2007-12.20 2007-12.30 2007-12.40 2007-12.50 2007-12.60 2007-12.70 2007-12.80 2007-12.90 2007-13.00

PART NUMBER 2003-8.20 2003-8.30 2003-8.40 2003-8.50 2003-8.60 2003-8.70 2003-8.80 2003-8.90 2003-9.00 2003-9.10 2003-9.20 2003-9.30 2003-9.40 2003-9.50 2003-9.60 2003-9.70 2003-9.80 2003-9.90 2003-10.00 2003-10.10 2003-10.20 2003-10.30 2003-10.40 2003-10.50 2003-10.60 2003-10.70 2003-10.80 2003-10.90 2003-11.00 2003-11.10 2003-11.20 2003-11.30 2003-11.40 2003-11.50 2003-11.60 2003-11.70 2003-11.80 2003-11.90 2003-12.00 2003-12.10 2003-12.20 2003-12.30 2003-12.40 2003-12.50 2003-12.60 2003-12.70 2003-12.80 2003-12.90 2003-13.00

JOBB BRONZE HSS-Co5 135º SPLIT POINT 30º HELIX BULK $ EACH – – – 21.41 – – – – 27.30 – – – – 28.27 – – – – 31.05 – – – – 35.73 – – – – 39.44 – – – – 47.11 – – – – 50.42 – – – – 63.25 – – – – 64.70

PART NUMBER – – – 2011-8.50 – – – – 2011-9.00 – – – – 2011-9.50 – – – – 2011-10.00 – – – – 2011-10.50 – – – – 2011-11.00 – – – – 2011-11.50 – – – – 2011-12.00 – – – – 2011-12.50 – – – – 2011-13.00

JOBB BLACK HSS 118º CHISEL POINT 30º HELIX BULK $ EACH – – – 10.25 – – – – 11.49 – – – – 12.56 – – – – 13.38 – 16.82 – – 16.46 – – – – 19.14 – – – – 20.53 – – – – 22.85 – – – – 25.05 – – – – 25.86

PART NUMBER – – – 2008-8.50 – – – – 2008-9.00 – – – – 2008-9.50 – – – – 2008-10.00 – 2008-10.20 – – 2008-10.50 – – – – 2008-11.00 – – – – 2008-11.50 – – – – 2008-12.00 – – – – 2008-12.50 – – – – 2008-13.00

DRILL BIT MATERIALS HIGH SPEED STEEL (HSS) Bordo HSS jobber drills are ground from premium quality M2 high speed steel. HSS can withstand higher operating temperatures than carbon steel without losing its temper (hardness). This property allows HSS to cut faster than high carbon steel, hence the name high speed steel. M2 HSS is an alloyed steel in the tungstenmolybdenum series which typically contains 4% Chromium, 5% Molybdenum, 6% Tungsten, 2% Vanadium and 1% Carbon (approx. by % wt). The material is also subject to high temperature heat treatment to complete the process. HSS steel has a very high wear resistance, a bending strength up to 4700MPa with high toughness and themoplasticity. HSS jobber drills are ideal for general purpose use in a wide variety of ferrous and non-ferrous metals, timber and plastic. HSS-Co5 (COBALT) Bordo Cobalt jobber drills are manufactured from HSS-Co5 steel which is very similar to M2 HSS with the important addition of 5% cobalt. The addition of cobalt to M2 HSS significantly increases heat resistance and allows the drill to run at higher temperatures without losing its temper (hardness). Cobalt drills provide increased performance and tool life when machining tough steels. HSS-Co5 (Cobalt) jobber drills are ideal for use in drilling stainless steel and high tensile steel.

* Some older stock may be 118º standard chisel point. All sizes 3.4mm and 1/8" and below are 118º standard chisel point.

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 5

WWW.BORDO.COM.AU

PAGE 005 21/04/12 6:17 PM

DRILLS JOBBER FRACTIONAL BULK

FRACTIONAL JOBBER DRILLS

ANSI B94-11 118º

140º–145º

135º

140º–145º

GROUP SURFACE FINISH MATERIAL POINT-TYPE FLUTE TYPE PACKAGING DIA INCH 1/64 1/32 3/64 1/16 5/64 3/32 7/64 1/8 9/64 5/32 11/64 3/16 13/64 7/32 15/64 1/4 17/64 9/32 19/64 5/16 21/64 11/32 23/64 3/8 25/64 13/32 27/64 7/16 29/64 15/32 31/64 1/2

MM 0.40 0.79 1.19 1.59 1.98 2.38 2.78 3.17 3.57 3.97 4.37 4.76 5.16 5.56 5.95 6.35 6.75 7.14 7.54 7.94 8.33 8.73 9.13 9.52 9.92 10.32 10.72 11.11 11.51 11.91 12.30 12.70

FL MM 5 13 19 22 25 32 38 41 44 51 54 59 62 64 67 70 73 75 78 81 84 87 89 92 95 98 100 103 106 110 111 114

OAL MM 19 35 44 48 51 57 67 70 73 79 83 89 92 95 98 102 105 108 111 114 117 121 124 127 130 133 137 140 143 146 149 152

PACK QTY 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5

JOBB BRIGHT HSS 118º SPLIT POINT* 30º HELIX BULK

JOBB BLACK HSS 118º SPLIT POINT* 30º HELIX BULK

$ EACH 9.32 5.95 3.43 2.76 2.59 2.59 2.59 2.59 3.16 3.40 3.89 4.14 4.76 5.14 5.52 6.09 7.15 8.03 9.03 9.28 9.91 10.66 11.54 13.33 14.05 14.84 16.38 18.63 20.47 22.00 24.44 24.95

PART NUMBER 2006-1/64 2006-1/32 2006-3/64 2006-1/16 2006-5/64 2006-3/32 2006-7/64 2006-1/8 2006-9/64 2006-5/32 2006-11/64 2006-3/16 2006-13/64 2006-7/32 2006-15/64 2006-1/4 2006-17/64 2006-9/32 2006-19/64 2006-5/16 2006-21/64 2006-11/32 2006-23/64 2006-3/8 2006-25/64 2006-13/32 2006-27/64 2006-7/16 2006-29/64 2006-15/32 2006-31/64 2006-1/2

PART NUMBER 2000-1/64 2000-1/32 2000-3/64 2000-1/16 2000-5/64 2000-3/32 2000-7/64 2000-1/8 2000-9/64 2000-5/32 2000-11/64 2000-3/16 2000-13/64 2000-7/32 2000-15/64 2000-1/4 2000-17/64 2000-9/32 2000-19/64 2000-5/16 2000-21/64 2000-11/32 2000-23/64 2000-3/8 2000-25/64 2000-13/32 2000-27/64 2000-7/16 2000-29/64 2000-15/32 2000-31/64 2000-1/2

JOBB BRONZE HSS-Co5 135º SPLIT POINT 30º HELIX BULK $ EACH 6.06 6.06 6.06 6.06 6.06 7.03 7.64 8.38 9.37 10.00 10.49 11.72 12.22 14.19 15.80 17.53 19.25 20.86 22.58 24.57 27.15 29.38 31.33 33.56 35.78 38.75 41.33 44.66 50.35

PART NUMBER 2010-1/16 2010-5/64 2010-3/32 2010-7/64 2010-1/8 2010-9/64 2010-5/32 2010-11/64 2010-3/16 2010-13/64 2010-7/32 2010-15/64 2010-1/4 2010-17/64 2010-9/32 2010-19/64 2010-5/16 2010-21/64 2010-11/32 2010-23/64 2010-3/8 2010-25/64 2010-13/32 2010-27/64 2010-7/16 2010-29/64 2010-15/32 2010-31/64 2010-1/2

PAGE 006

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 6

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:17 PM

DRILLS JOBBER GAUGE BULK

GROUP SURFACE FINISH MATERIAL POINT-TYPE FLUTE TYPE PACKAGING DIA GAUGE 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41

MM 0.34 0.37 0.41 0.46 0.51 0.53 0.57 0.61 0.63 0.66 0.71 0.74 0.79 0.81 0.84 0.89 0.91 0.94 0.96 0.99 1.02 1.04 1.07 1.09 1.18 1.32 1.4 1.51 1.61 1.7 1.78 1.85 1.93 1.99 2.06 2.08 2.18 2.26 2.37 2.44

JOBB BRIGHT HSS 118º STD CHISEL 30º HELIX BULK FL MM 1/8 1/8 3/16 3/16 3/16 1/4 1/4 5/16 5/16 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 5/8 11/16 11/16 11/16 11/16 3/4 3/4 7/8 7/8 7/8 7/8 1 1 1 1 1 1-1/8 1-1/8 1-1/8 1-1/4 1-1/4 1-3/8

OAL MM 3/4 3/4 7/8 7/8 7/8 1 1 1-1/8 1-1/8 1-1/4 1-1/4 1-3/8 1-3/8 1-3/8 1-3/8 1-1/2 1-1/2 1-1/2 1-1/2 1-5/8 1-5/8 1-5/8 1-5/8 1-3/4 1-3/4 1-7/8 1-7/8 1-7/8 1-7/8 2 2 2 2 2 2-1/8 2-1/8 2-1/8 2-1/4 2-1/4 2-3/8

PACK QTY 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12

$ EACH 13.29 13.29 11.14 11.14 11.14 11.14 11.14 11.14 11.14 11.14 9.32 9.32 8.61 8.61 8.61 8.61 8.61 8.61 8.61 8.61 8.13 8.13 8.13 8.13 8.13 5.12 5.12 5.12 4.65 4.65 4.65 4.65 4.65 4.65 4.65 4.65 4.65 4.65 4.65 4.65

PART NUMBER 2013-80 2013-79 2013-78 2013-77 2013-76 2013-75 2013-74 2013-73 2013-72 2013-71 2013-70 2013-69 2013-68 2013-67 2013-66 2013-65 2013-64 2013-63 2013-62 2013-61 2013-60 2013-59 2013-58 2013-57 2013-56 2013-55 2013-54 2013-53 2013-52 2013-51 2013-50 2013-49 2013-48 2013-47 2013-46 2013-45 2013-44 2013-43 2013-42 2013-41

GROUP SURFACE FINISH MATERIAL POINT-TYPE FLUTE TYPE PACKAGING DIA GAUGE 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

MM 2.49 2.53 2.58 2.63 2.70 2.79 2.72 2.87 2.95 3.05 3.26 3.45 3.57 3.66 3.73 3.80 3.86 3.91 3.99 4.04 4.09 4.22 4.30 4.39 4.50 4.57 4.62 4.70 4.80 4.85 4.91 4.98 5.05 5.10 5.18 5.22 5.31 5.41 5.61 5.79

JOBB BRIGHT HSS 118º STD CHISEL 30º HELIX BULK FL MM 1-3/8 1-3/8 1-7/16 1-7/16 1-7/16 1-1/2 1-1/2 1-1/2 1-5/8 1-5/8 1-5/8 1-3/4 1-3/4 1-7/8 1-7/8 1-7/8 2 2 2 2-1/8 2-1/8 2-1/8 2-1/8 2-3/16 2-3/16 2-3/16 2-3/16 2-5/16 2-5/16 2-5/16 2-7/16 2-7/16 2-7/16 2-7/16 2-1/2 2-1/2 2-1/2 2-1/2 2-5/8 2-5/8

OAL MM 2-3/8 2-3/8 2-1/2 2-1/2 2-1/2 2-5/8 2-5/8 2-5/8 2-3/4 2-3/4 2-3/4 2-7/8 2-7/8 3 3 3 3-1/8 3-1/8 3-1/8 3-1/4 3-1/4 3-1/4 3-1/4 3-3/8 3-3/8 3-3/8 3-3/8 3-1/2 3-1/2 3-1/2 3-5/8 3-5/8 3-5/8 3-5/8 3-3/4 3-3/4 3-3/4 3-3/4 3-7/8 3-7/8

PACK QTY 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12

$ EACH 4.57 4.82 4.82 4.82 4.82 4.82 4.82 4.82 4.82 4.82 4.82 5.51 5.51 5.51 5.51 5.51 7.35 7.35 7.35 7.35 7.57 7.57 7.57 7.57 7.57 7.57 7.57 7.57 9.20 9.20 9.20 9.20 9.64 9.64 9.64 9.64 11.48 11.48 11.48 11.48

PART NUMBER 2013-40 2013-39 2013-38 2013-37 2013-36 2013-35 2013-34 2013-33 2013-32 2013-31 2013-30 2013-29 2013-28 2013-27 2013-26 2013-25 2013-24 2013-23 2013-22 2013-21 2013-20 2013-19 2013-18 2013-17 2013-16 2013-15 2013-14 2013-13 2013-12 2013-11 2013-10 2013-9 2013-8 2013-7 2013-6 2013-5 2013-4 2013-3 2013-2 2013-1

GAUGE DRILL SETS PAGE

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 7

WWW.BORDO.COM.AU

118º

125º–135º

Standard Point (chisel point) Standard point is suitable for general purpose drilling.

USAGE GAUGE DRILLS Gauge size drill calculations are generally made utilising a referance book or table. For example, to drill a hole which is 10 thou (thousandth of an inch = .001) bigger than a 1/8” bolt, the user must first work out that 1/8” is 125 thou, so the required hole size is 135 thou. Using a reference table establishes that you would need a number 29. Number drill bit gauge sizes are analogous to, but different from, American wire gauge. Number gauge is most commonly used from size 80 (the smallest) to size 1 (the largest) followed by letter gauge size A (the smallest) to size Z (the largest). Number gauge is actually defined down to size 97, but these smallest sizes are very rarely used. DRILL BIT SURFACE TREATMENT BRIGHT FINISH A bright finish tool has no surface treatment and is supplied in the as-ground condition. These tools are suitable for general purpose use, particularly for non-ferrous applications.

PAGE 007 21/04/12 6:17 PM

DRILLS JOBBER BULK MERCHANDISERS

METRIC JOBBER DRILLS

DIN338 FRACTIONAL JOBBER DRILLS

GROUP SURFACE FINISH MATERIAL POINT-TYPE FLUTE TYPE PACKAGING

JOBB BRIGHT HSS 118º SPLIT POINT* 30º HELIX BULK

JOBB BLACK HSS 118º SPLIT POINT* 30º HELIX BULK

JOBB BRIGHT HSS 118º SPLIT POINT* 30º HELIX BULK

JOBB BLACK HSS 118º SPLIT POINT* 30º HELIX BULK

ANSI B94-11 118º

MERCHANDISER TYPE

140º–145º

METRIC BRIGHT 230 PIECES METRIC BLACK 230 PIECES FRACTIONAL BRIGHT 265 PIECES FRACTIONAL BLACK 265 PIECES

$ MERCH 1,729.05

MERCHANDISER CONTENTS

QTY EACH 20 10 10 10 20 10 10 10 10 10 20 10 10 10 10 5 5 5 5 5 5 5 5 5 5

PART NUMBER 2007-D2

PART NUMBER 2007-1.00 2007-1.50 2007-2.00 2007-2.50 2007-3.00 2007-3.50 2007-4.00 2007-4.50 2007-5.00 2007-5.50 2007-6.00 2007-6.50 2007-7.00 2007-7.50 2007-8.00 2007-8.50 2007-9.00 2007-9.50 2007-10.00 2007-10.50 2007-11.00 2007-11.50 2007-12.00 2007-12.50 2007-13.00

$ MERCH

PART NUMBER

1,729.05

2003-D2

QTY EACH 20 10 10 10 20 10 10 10 10 10 20 10 10 10 10 5 5 5 5 5 5 5 5 5 5

PART NUMBER 2003-1.00 2003-1.50 2003-2.00 2003-2.50 2003-3.00 2003-3.50 2003-4.00 2003-4.50 2003-5.00 2003-5.50 2003-6.00 2003-6.50 2003-7.00 2003-7.50 2003-8.00 2003-8.50 2003-9.00 2003-9.50 2003-10.00 2003-10.50 2003-11.00 2003-11.50 2003-12.00 2003-12.50 2003-13.00

$ MERCH

PART NUMBER

2,010.85

2006-D2

QTY EACH 10 10 10 10 20 10 10 10 20 10 10 10 20 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5

PART NUMBER 2006-1/16 2006-5/64 2006-3/32 2006-7/64 2006-1/8 2006-9/64 2006-5/32 2006-11/64 2006-3/16 2006-13/64 2006-7/32 2006-15/64 2006-1/4 2006-17/64 2006-9/32 2006-19/64 2006-5/16 2006-21/64 2006-11/32 2006-23/64 2006-3/8 2006-25/64 2006-13/32 2006-27/64 2006-7/16 2006-29/64 2006-15/32 2006-31/64 2006-1/2

$ MERCH

PART NUMBER

2,010.85

2000-D2

QTY EACH 10 10 10 10 20 10 10 10 20 10 10 10 20 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5

PART NUMBER 2000-1/16 2000-5/64 2000-3/32 2000-7/64 2000-1/8 2000-9/64 2000-5/32 2000-11/64 2000-3/16 2000-13/64 2000-7/32 2000-15/64 2000-1/4 2000-17/64 2000-9/32 2000-19/64 2000-5/16 2000-21/64 2000-11/32 2000-23/64 2000-3/8 2000-25/64 2000-13/32 2000-27/64 2000-7/16 2000-29/64 2000-15/32 2000-31/64 2000-1/2

* Some older stock may be 118º standard chisel point. All sizes 3.4mm and 1/8" and below are 118º standard chisel point.

PAGE 008

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 8

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:18 PM

DRILLS JOBBER BULK MERCHANDISERS

GROUP SURFACE FINISH MATERIAL POINT-TYPE FLUTE TYPE PACKAGING MERCHANDISER TYPE BULK JOBBER DRAWER MERCHANDISER MERCHANDISER CONTENTS

JOBB BRIGHT HSS 118º SPLIT POINT* 30º HELIX BULK MERCHANDISER TOTAL PIECES 630 QTY EACH 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

$ MERCHANDISER 5,314.65 TYPE

SIZE

Jobber Jobber Jobber Jobber Jobber Jobber Jobber Jobber Jobber Jobber Jobber Jobber Jobber Jobber Jobber Jobber Jobber Jobber Jobber Jobber Jobber Jobber Jobber Jobber Jobber Jobber Jobber Jobber Jobber Jobber Jobber Jobber Jobber Jobber Jobber Jobber Jobber Jobber Jobber Jobber Jobber Jobber Jobber Jobber Jobber Jobber Jobber

1.0mm 1.5mm 2.0mm 2.5mm 3.0mm 3.3mm 3.5mm 3.7mm 3.9mm 4.0mm 4.1mm 4.2mm 4.5mm 5.0mm 5.1mm 5.5mm 6.0mm 6.5mm 6.6mm 6.8mm 6.9mm 7.0mm 7.5mm 8.0mm 8.4mm 8.5mm 8.7mm 8.8mm 9.0mm 9.4mm 9.5mm 9.9mm 10.0mm 10.2mm 10.5mm 10.8mm 11.0mm 11.1mm 11.2mm 11.5mm 11.8mm 12.0mm 12.2mm 12.5mm 12.8mm 12.9mm 13.0mm

METRIC JOBBER DRILLS

DIN338 FRACTIONAL JOBBER DRILLS

ANSI B94-11

PART NUMBER 2007-D4 PART NUMBER 2007-1.00 2007-1.50 2007-2.00 2007-2.50 2007-3.00 2007-3.30 2007-3.50 2007-3.70 2007-3.90 2007-4.00 2007-4.10 2007-4.20 2007-4.50 2007-5.00 2007-5.10 2007-5.50 2007-6.00 2007-6.50 2007-6.60 2007-6.80 2007-6.90 2007-7.00 2007-7.50 2007-8.00 2007-8.40 2007-8.50 2007-8.70 2007-8.80 2007-9.00 2007-9.40 2007-9.50 2007-9.90 2007-10.00 2007-10.20 2007-10.50 2007-10.80 2007-11.00 2007-11.10 2007-11.20 2007-11.50 2007-11.80 2007-12.00 2007-12.20 2007-12.50 2007-12.80 2007-12.90 2007-13.00

QTY EACH 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5

TYPE

SIZE

1/16” 5/64” 3/32” 7/64” 1/8” 9/64” 5/32” 11/64” 3/16” 13/64” 7/32” 15/64” 1/4” 17/64” 9/32” 19/64” 5/16” 21/64” 11/32” 23/64” 3/8” 25/64” 13/32” 27/64” 7/16” 29/64” 15/32” 31/64” 1/2”

10 10 10 10 10 10

Panel D’End Panel D’End Panel D’End Panel S’End Panel S’End Panel S’End

#30 #20 #11 #30 #20 #11

2345-30 2345-20 2345-11 2346-30 2346-20 2346-11

USAGE PANEL DRILLS Panel drills are principally used during sheet metal fabrication to drill holes for rivets. They are designed to drill shallow holes that do not exceed 1.25 x drill diameter. When using double ended panel drills ensure the drill chuck jaws are tight to prevent damage to the back of the chuck. DRILL BIT MATERIALS HIGH SPEED STEEL (HSS) Bordo HSS jobber drills are ground from premium quality M2 high speed steel. HSS can withstand higher operating temperatures than carbon steel without losing its temper (hardness). This property allows HSS to cut faster than high carbon steel, hence the name high speed steel. M2 HSS is an alloyed steel in the tungstenmolybdenum series which typically contains 4% Chromium, 5% Molybdenum, 6% Tungsten, 2% Vanadium and 1% Carbon (approx. by % wt). The material is also subject to high temperature heat treatment to complete the process. HSS steel has a very high wear resistance, a bending strength up to 4700MPa with high toughness and themoplasticity. HSS jobber drills are ideal for general purpose use in a wide variety of ferrous and non-ferrous metals, timber and plastic.

* Some older stock may be 118º standard chisel point. All sizes 3.4mm and 1/8" and below are 118º standard chisel point.

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 9

WWW.BORDO.COM.AU

PAGE 009 21/04/12 6:18 PM

DRILLS JOBBER METRIC CLAM SHELL

135º

140º–145º

HIGH SPEED STEEL

DIA MM 1.00 1.50 2.00 2.50 3.00 3.50 4.00 4.50 5.00 5.50 6.00 6.50 7.00 7.50 8.00 8.50 9.00 9.50 10.00 10.50 11.00 11.50 12.00 12.50 13.00

FL MM 12 18 24 30 33 39 43 47 52 57 57 63 69 69 75 75 81 81 87 87 94 94 101 101 101

OAL MM 34 40 49 57 61 70 75 80 86 93 93 101 109 109 117 117 125 125 133 133 142 142 151 151 151

CLAM QTY 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

HIGH SPEED STEEL HIGH SPEED STEEL

$ CLAM 7.45 6.33 5.86 6.20 5.68 3.46 3.83 4.21 4.62 5.87 5.99 6.90 8.43 8.80 9.95 10.71 11.93 12.98 13.79 16.81 19.44 20.80 23.07 25.22 26.03

COBALT HSSSPEED STEEL HIGH

PART NUMBER 2007-1.00S 2007-1.50S 2007-2.00S 2007-2.50S 2007-3.00S 2007-3.50S 2007-4.00S 2007-4.50S 2007-5.00S 2007-5.50S 2007-6.00S 2007-6.50S 2007-7.00S 2007-7.50S 2007-8.00S 2007-8.50S 2007-9.00S 2007-9.50S 2007-10.00S 2007-10.50S 2007-11.00S 2007-11.50S 2007-12.00S 2007-12.50S 2007-13.00S

COBALT HSS COBALT HSS

$ CLAM 13.77 13.77 13.77 13.77 13.77 8.67 9.29 10.39 11.58 13.03 15.01 16.85 18.78 19.92 22.86 23.68 29.57 30.55 33.33 37.99 41.70 49.38 52.68 65.52 66.98

HIGH SPEED STEELSTEEL HIGH SPEED

PART NUMBER 2011-1.00S 2011-1.50S 2011-2.00S 2011-2.50S 2011-3.00S 2011-3.50S 2011-4.00S 2011-4.50S 2011-5.00S 2011-5.50S 2011-6.00S 2011-6.50S 2011-7.00S 2011-7.50S 2011-8.00S 2011-8.50S 2011-9.00S 2011-9.50S 2011-10.00S 2011-10.50S 2011-11.00S 2011-11.50S 2011-12.00S 2011-12.50S 2011-13.00S

* Some older stock may be 118º standard chisel point. All sizes 3.4mm and 1/8" and below are 118º standard chisel point.

PAGE 010

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 10

12.7mm

PLASTIC

19.05mm

PLASTIC

3/4" 1/2"

WOOD METAL

3/8" REDUCED SHANK TWIST DRILL 3/8" REDUCED SHANK TWIST DRILL

3/8" REDUCED SHANK TWIST DRILL

HIGH SPEED STEEL HIGH SPEED STEEL

WOOD METAL

REDUCED SHANK REDUCED SHANK

12.7mm

PLASTIC

1/2"

PLASTIC

13.00mm

WOOD

METAL

REDUCED SHANK REDUCED SHANK

3/8" REDUCED SHANK TWIST DRILL

HIGH SPEED STEEL TIPPED CARBIDE

WOOD METAL

3/8" REDUCED SHANK TWIST DRILL

1/2"

13.00mm

13.0mm

PLASTIC

450 RPM SINGLE BRICK

WOOD METAL

REDUCED SHANK MASONRY DRILL

1/2"

12.7mm

1/2"

13.0mm 450 RPM SINGLE BRICK

COBALT HSS CARBIDE TIPPED

Stainless 460 RPM Cast Iron 500 RPM Medium Steel 640 RPM

METAL

MASONRY DRILL COBALT DRILL

12.7mm

1/2" Stainless 460 RPM Cast Iron 500 RPM Medium Steel 640 RPM

13.0mm

METAL

Stainless 460 RPM Cast Iron 500 RPM Medium Steel 640 RPM

PLASTIC

METAL

COBALT DRILL COBALT DRILL

WOOD

METAL

13.0mm

METAL

Wood 790 RPM Medium Steel 530 RPM Plastic 760 RPM

13.0mm

JOBB BRONZE HSS-Co5 135º SPLIT POINT 30º HELIX CLAM SHELL

COBALT DRILL TWIST DRILL

12.7mm

PLASTIC

1/2"

13.0mm

PLASTIC

Wood 790 RPM Medium Steel 530 RPM Plastic 760 RPM

TWIST DRILL

140º–145º

WOOD

METAL

Wood 790 RPM Medium Steel 530 RPM Plastic 760 RPM

PLASTIC

WOOD METAL

TWIST DRILL TWIST DRILL

WOOD METAL

12.7mm

118º

JOBB BRIGHT HSS 118º SPLIT POINT* 30º HELIX CLAM SHELL

1/2"

DIN338

GROUP SURFACE FINISH MATERIAL POINT-TYPE FLUTE TYPE PACKAGING

Wood 790 RPM Medium Steel 530 RPM Plastic 760 RPM

METRIC JOBBER DRILLS

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:18 PM

DRILLS JOBBER FRACTIONAL CLAM SHELL

HIGH SPEED STEEL

DIA INCH 1/16 5/64 3/32 7/64 1/8 9/64 5/32 11/64 3/16 13/64 7/32 15/64 1/4 17/64 9/32 19/64 5/16 21/64 11/32 23/64 3/8 25/64 13/32 27/64 7/16 29/64 15/32 31/64 1/2

MM 1.59 1.98 2.38 2.78 3.17 3.57 3.97 4.37 4.76 5.16 5.56 5.95 6.35 6.75 7.14 7.54 7.94 8.33 8.73 9.13 9.52 9.92 10.32 10.72 11.11 11.51 11.91 12.30 12.70

FL MM 22 25 32 38 41 44 51 54 59 62 64 67 70 73 75 78 81 84 87 89 92 95 98 100 103 106 110 111 114

OAL MM 48 51 57 67 70 73 79 83 89 92 95 98 102 105 108 111 114 117 121 124 127 130 133 137 140 143 146 149 152

PACK QTY 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

$ CLAM 6.00 5.65 5.65 5.74 5.74 3.64 3.87 4.35 4.59 5.19 5.57 5.93 6.50 7.54 8.53 9.52 9.76 10.38 11.12 11.98 13.74 14.44 15.21 16.73 18.93 20.74 22.25 24.63 25.14

PART NUMBER 2006-1/16S 2006-5/64S 2006-3/32S 2006-7/64S 2006-1/8S 2006-9/64S 2006-5/32S 2006-11/64S 2006-3/16S 2006-13/64S 2006-7/32S 2006-15/64S 2006-1/4S 2006-17/64S 2006-9/32S 2006-19/64S 2006-5/16S 2006-21/64S 2006-11/32S 2006-23/64S 2006-3/8S 2006-25/64S 2006-13/32S 2006-27/64S 2006-7/16S 2006-29/64S 2006-15/32S 2006-31/64S 2006-1/2S

COBALT HSS COBALT HSS

$ CLAM 13.77 13.77 13.77 13.77 13.77 8.40 9.02 9.75 10.72 11.34 11.82 13.04 15.04 17.20 18.96 21.27 23.16 24.92 26.82 28.97 31.83 34.26 39.35 41.98 44.61 48.12 51.19 55.16 61.87

1/2"

* Some older stock may be 118º standard chisel point. All sizes 3.4mm and 1/8" and below are 118º standard chisel point.

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 11

WWW.BORDO.COM.AU

WOOD

METAL

PLASTIC

REDUCED SHANK REDUCED SHANK

3/8" REDUCED SHANK TWIST DRILL

450 RPM SINGLE BRICK

PLASTIC

13.00mm

13.0mm

WOOD

METAL

MASONRY DRILL REDUCED SHANK

1/2"

12.7mm

1/2"

COBALTCARBIDE HSS TIPPED

PART NUMBER 2010-1/16S 2010-5/64S 2010-3/32S 2010-7/64S 2010-1/8S 2010-9/64S 2010-5/32S 2010-11/64S 2010-3/16S 2010-13/64S 2010-7/32S 2010-15/64S 2010-1/4S 2010-17/64S 2010-9/32S 2010-19/64S 2010-5/16S 2010-21/64S 2010-11/32S 2010-23/64S 2010-3/8S 2010-25/64S 2010-13/32S 2010-27/64S 2010-7/16S 2010-29/64S 2010-15/32S 2010-31/64S 2010-1/2S

DRILL BIT MATERIALS HIGH SPEED STEEL (HSS) Bordo HSS jobber drills are ground from premium quality M2 high speed steel. HSS can withstand higher operating temperatures than carbon steel without losing its temper (hardness). This property allows HSS to cut faster than high carbon steel, hence the name high speed steel. M2 HSS is an alloyed steel in the tungstenmolybdenum series which typically contains 4% Chromium, 5% Molybdenum, 6% Tungsten, 2% Vanadium and 1% Carbon (approx. by % wt). The material is also CARBIDE subject to high HIGH SPEED STEEL TIPPED temperature heat treatment to complete the process. HSS steel has a very high wear resistance, a bending strength up to 4700MPa with high toughness and themoplasticity. HSS jobber drills are ideal for general purpose use in a wide variety of ferrous and non-ferrous metals, timber and plastic. HSS-Co5 (COBALT) Bordo Cobalt jobber drills are manufactured from HSS-Co5 steel which is very similar to M2 HSS with the important addition of 5% cobalt. The addition of cobalt to M2 HSS significantly increases heat resistance and allows the drill to run at higher temperatures without losing its temper (hardness). Cobalt drills provide increased performance and tool life when machining tough steels. HSS-Co5 (Cobalt) jobber drills are ideal for use in drilling stainless steel and high tensile steel.

13.0mm 450 RPM SINGLE BRICK

Stainless 460 RPM Cast Iron 500 RPM Medium Steel 640 RPM

METAL

COBALT DRILL MASONRY DRILL

12.7mm

13.0mm

1/2" Stainless 460 RPM Cast Iron 500 RPM Medium Steel 640 RPM

METAL

Stainless 460 RPM Cast Iron 500 RPM Medium Steel 640 RPM

13.0mm

HIGH SPEED COBALT STEEL HSS

METAL

COBALT DRILL COBALT DRILL

PLASTIC

Stainless 460 RPM Cast Iron 500 RPM Medium Steel 640 RPM

13.0mm

METAL

WOOD METAL

Wood 790 RPM Medium Steel 530 RPM Plastic 760 RPM

HIGH SPEED STEEL HIGH SPEED STEEL

JOBB BRONZE HSS-Co5 135º SPLIT POINT 30º HELIX CLAM SHELL

TWIST DRILL COBALT DRILL

12.7mm

PLASTIC

1/2"

PLASTIC

13.0mm

WOOD

METAL

Wood 790 RPM Medium Steel 530 RPM Plastic 760 RPM

WOOD METAL

TWIST DRILL TWIST DRILL

TWIST DRILL

PLASTIC

1/2"

WOOD METAL

12.7mm

JOBB BRIGHT HSS 118º SPLIT POINT* 30º HELIX CLAM SHELL

Wood 790 RPM Medium Steel 530 RPM Plastic 760 RPM

GROUP SURFACE FINISH MATERIAL POINT-TYPE FLUTE TYPE PACKAGING

PAGE 011 21/04/12 6:18 PM

HIGH S HIGH SPEED STE

DRILLS JOBBER CLAM SHELL MERCHANDISERS

METRIC JOBBER DRILLS

DIN338 FRACTIONAL JOBBER DRILLS

GROUP SURFACE FINISH MATERIAL POINT-TYPE FLUTE TYPE PACKAGING

JOBB BRIGHT HSS 118º SPLIT POINT* 30º HELIX CLAM SHELL

JOBB BRONZE HSS-Co5 135º SPLIT POINT 30º HELIX CLAM SHELL

JOBB BRIGHT HSS 118º SPLIT POINT* 30º HELIX CLAM SHELL

JOBB BRONZE HSS-Co5 135º SPLIT POINT 30º HELIX CLAM SHELL

ANSI B94-11 118º

MERCHANDISER TYPE

140º–145º

METRIC BRIGHT 171 CLAM SHELLS METRIC COBALT 92 CLAM SHELLS FRACTIONAL BRIGHT 179 CLAM SHELLS FRACTIONAL COBALT 99 CLAM SHELLS

$ MERCH 1,469.95

MERCHANDISER CONTENTS

135º

140º–145º

PAGE 012

QTY EACH 10 10 10 10 10 10 10 10 10 5 10 5 5 5 10 5 5 3 10 3 3 3 3 3 3

PART NUMBER 2007-D1

$ MERCH

PART NUMBER

1,954.99

2011-D1

QTY EACH 5 5 5 5 5 5 5 5 5 3 5 3 3 3 5 3 3 2 5 2 2 2 2 2 2

$ MERCH

PART NUMBER

1,524.01

2006-D1

QTY EACH 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 10 3 3 3 3 3 3 3 3

$ MERCH

PART NUMBER

2,083.55

2010-D1

QTY EACH 5 5 5 5 5 5 5 5 5 3 3 3 3 3 3 3 3 3 3 3 5 2 2 2 2 2 2 2 2

* Some older stock may be 118º standard chisel point. All sizes 3.4mm and 1/8" and below are 118º standard chisel point.

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 12

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:19 PM

METRIC JOBBER DRILLS

DIN338 FRACTIONAL JOBBER DRILLS

ANSI B94-11 118º

BRIGHT FINISH Bright finish jobber drills have no surface treatment and are supplied in the as-ground condition. This is the most common finish for HSS jobber drills. These drills can be used for all general purpose drilling in wood, metal and plastics. They are particularly well suited for use in non-ferrous applications.

140º–145º 0 45º

METRIC JOBBER DRILLS

DIN338 FRACTIONAL JOBBER DRILLS

ANSI B94-11 118º

140º–14 º 140º–145º

METRIC JOBBER DRILLS

DIN338 FRACTIONAL JOBBER DRILLS

ANSI B94-11 135º

BRONZE FINISH (gold oxide) This metallic brown coloured low temperature temper treatment is normally only used on cobalt tools for identification purposes. Cobalt HSS drills are extremely hard and provide superior performance and increased tool life especially when drilling in stainless steel and high tensile steel.

140º–14 º 140º–145º

18193_Bordo_BuyersGuide_082011_PJ32.indd 13

BRIGHT HSS 2007-M1 12 PIECE 1.0-6.5 x 0.5mm rises 2007-M2 19 PIECE 1.0-10.0 x 0.5mm rises 2007-M3 25 PIECE 1.0-13.0 x 0.5mm rises 2007-M5 19 PIECE 1.0-6.5 x 0.5mm rises 7.0-13.0 x 1.0mm rises 2006-F1 13 PIECE 1/16"-1/4" x 1/64" rises 2006-F2 21 PIECE 1/16"-3/8" x 1/64" rises 2006-F3 29 PIECE 1/16"-1/2" x 1/64" rises 2006-F5 21 PIECE 1/16"-1/4" x 1/64" rises 9/32"-1/2" x 1/32" rises

BLACK HSS 2003-M1 12 PIECE 1.0-6.5 x 0.5mm rises 2003-M2 19 PIECE 1.0-10.0 x 0.5mm rises 2003-M3 25 PIECE 1.0-13.0 x 0.5mm rises 2000-F1 13 PIECE 1/16"-1/4" x 1/64" rises 2000-F2 21 PIECE 1/16"-3/8" x 1/64" rises 2000-F3 29 PIECE 1/16"-1/2" x 1/64" rises

COBALT HSS-Co5 2011-M2 19 PIECE 1.0-10.0 x 0.5mm rises 2011-M3 25 PIECE 1.0-13.0 x 0.5mm rises 2011-M5 19 PIECE 1.0-6.5 x 0.5mm rises 7.0-13.0 x 1.0mm rises 2010-F2 21 PIECE 1/16"-3/8" x 1/64" rises 2010-F3 29 PIECE 1/16"-1/2" x 1/64" rises 2010-F5 21 PIECE 1/16"-1/4" x 1/64" rises 9/32"-1/2" x 1/32" rises

23/04/12 4:14 PM

DRILLS JOBBER METRIC & GAUGE SETS

METRIC JOBBER DRILLS

DIN338

GROUP SURFACE FINISH MATERIAL POINT-TYPE FLUTE TYPE PACKAGING

SET DESCRIPTION SET CONTENTS M1 JOBBER – ABS CASE 1.0 - 6.5 x 0.5mm rises M2 JOBBER – ABS CASE 1.0 - 10.0 x 0.5mm rises M3 JOBBER – ABS CASE 1.0 - 13.0 x 0.5mm rises M5 JOBBER – ABS CASE 1.0 - 6.5 x 0.5mm rises 7.0 - 13.0 x 1.0mm rises WIRE GAUGE S2 – METAL CASE No.61 - No.80 WIRE GAUGE S1 – METAL CASE No.1 - No.60

NEW PRODUCT

MERCHANDISER DESCRIPTION MERCHANDISER CONTENTS DS1 MERCHANDISER 9 SETS M2 DRILL SET M3 DRILL SET M5 DRILL SET DS2 MERCHANDISER 10 SETS M1 DRILL SET M2 DRILL SET M3 DRILL SET DS3 MERCHANDISER 9 SETS M3 DRILL SET

JOBB BRIGHT HSS 118º SPLIT POINT* 30º HELIX SET

JOBB BLACK HSS 118º SPLIT POINT* 30º HELIX SET

JOBB BRONZE HSS-Co5 135º SPLIT POINT 30º HELIX SET

DRILLS QTY

$ SET

PART NUMBER

$ SET

PART NUMBER

$ SET

PART NUMBER

57.40

2007-M1

57.40

2003-M1

–

136.55

2007-M2

136.55

2003-M2

313.56

2011-M2

268.32

2007-M3

268.32

2003-M3

612.83

2011-M3

175.25

2007-M5

–

399.39

2011-M5

205.36

2013-WGS2

–

419.70

2013-WGS1

–

SET QTY

$ MERCHANDISER

PART NUMBER

$ MERCHANDISER

PART NUMBER

$ MERCHANDISER

PART NUMBER

1,740.36

2007-DS1

–

3,977.34

2011-DS1

1,444.21

2007-DS2

1,444.21

2003-DS2

–

2,414.88

2007-DS3

–

3 3 3 4 3 3 9

* Some older stock may be 118º standard chisel point. All sizes 3.4mm and 1/8" and below are 118º standard chisel point.

PAGE 014

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 14

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:19 PM

DRILLS JOBBER METRIC & GAUGE SETS

DRILL BIT SURFACE TREATMENT BRIGHT FINISH A bright finish tool has no surface treatment and is supplied in the as-ground condition. These tools are suitable for general purpose use, particularly for non-ferrous applications. BLACK FINISH (also called blue finish) A black finish is achieved by steam tempering, a thermal process resulting in a porous tool coating. This surface helps to keep lubricant on the tool, particularly important on the cutting edges, thus reducing friction and cold welding. The result is increased tool life. Black finish tools are generally recommended for ferrous applications where the oxide layer aids chip flow and heat dissipation. BRONZE FINISH (gold oxide) This metallic brown coloured low temperature temper treatment is normally only used on cobalt tools for identification purposes Cobalt HSS drills are extremely hard and provide superior performance and increased tool life especially in stainless steel and high tensile steel.

2013-WGS2

2013-WGS1

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 15

WWW.BORDO.COM.AU

PAGE 015 21/04/12 6:20 PM

DRILLS JOBBER FRACTIONAL SETS

FRACTIONAL JOBBER DRILLS

ANSI B94-11

GROUP SURFACE FINISH MATERIAL POINT-TYPE FLUTE TYPE PACKAGING

SET DESCRIPTION SET CONTENTS F1 JOBBER – ABS CASE 1/16" - 1/4" x 1/64" rises F2 JOBBER – ABS CASE 1/16" - 3/8" x 1/64" rises F3 JOBBER – ABS CASE 1/16" - 1/2" x 1/64" rises F5 JOBBER – ABS CASE 1/16" - 1/4" x 1/64" rises 9/32" - 1/2" x 1/32" rises

NEW PRODUCT

MERCHANDISER DESCRIPTION MERCHANDISER CONTENTS DS1 MERCHANDISER 9 SETS F2 DRILL SET F3 DRILL SET F5 DRILL SET DS2 MERCHANDISER 10 SETS F1 DRILL SET F2 DRILL SET F3 DRILL SET DS3 MERCHANDISER 9 SETS F3 DRILL SET

JOBB BRIGHT HSS 118º SPLIT POINT* 30º HELIX SET

JOBB BLACK HSS 118º SPLIT POINT* 30º HELIX SET

JOBB BRONZE HSS-Co5 135º SPLIT POINT 30º HELIX SET

DRILLS QTY

$ SET

PART NUMBER

$ SET

PART NUMBER

$ SET

PART NUMBER

60.79

2006-F1

60.79

2000-F1

–

139.33

2006-F2

139.33

2000-F2

331.80

2010-F2

297.45

2006-F3

297.45

2000-F3

714.03

2010-F3

188.88

2006-F5

–

490.54

2010-F5

SET QTY

$ MERCHANDISER

PART NUMBER

$ MERCHANDISER

PART NUMBER

$ MERCHANDISER

PART NUMBER

1,876.98

2006-DS1

–

4,609.11

2010-DS1

1,553.50

2006-DS2

1,553.50

2000-DS2

–

2,677.05

2006-DS3

–

3 3 3 4 3 3 9

* Some older stock may be 118º standard chisel point. All sizes 3.4mm and 1/8" and below are 118º standard chisel point.

PAGE 016

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 16

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:20 PM

DRILLS JOBBER FRACTIONAL SETS

DRILL BIT MATERIALS HIGH SPEED STEEL (HSS) Bordo HSS jobber drills are ground from premium quality M2 high speed steel. HSS can withstand higher operating temperatures than carbon steel without losing its temper (hardness). This property allows HSS to cut faster than high carbon steel, hence the name high speed steel. M2 HSS is an alloyed steel in the tungstenmolybdenum series which typically contains 4% Chromium, 5% Molybdenum, 6% Tungsten, 2% Vanadium and 1% Carbon (approx. by % wt). The material is also subject to high temperature heat treatment to complete the process. HSS steel has a very high wear resistance, a bending strength up to 4700MPa with high toughness and themoplasticity. HSS jobber drills are ideal for general purpose use in a wide variety of ferrous and non-ferrous metals, timber and plastic. HSS-Co5 (COBALT) Bordoâ&#x20AC;&#x2122;s Cobalt jobber drills are manufactured from HSS-Co5 steel which is very similar to M2 HSS with the important addition of 5% cobalt. The addition of cobalt to M2 HSS significantly increases heat resistance and allows the drill to run at higher temperatures without losing its temper (hardness). Cobalt drills provide increased performance and tool life when machining tough steels. HSS-Co5 (Cobalt) jobber drills are ideal for use in drilling stainless steel and high tensile steel.

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 17

WWW.BORDO.COM.AU

PAGE 017 21/04/12 6:21 PM

DRILLS JOBBER DRILL SET CADDIES

DRILL SET CADDIES Drill set caddies are designed to snap into the base of Bordo’s ABS drill sets. The caddies allow the convenient storage of extra drills, screwdriver bits and other related accessories.

GROUP CADDY TYPE CONTENTS METRIC JOBBER DRILLS – BRIGHT

JOBB

1.00 1.50 2.00 2.50 3.00

PART NUMBER 2007-1.00 2007-1.50 2007-2.00 2007-2.50 2007-3.00

$ EACH 14.29

PART NUMBER 2018-C2

1 1 1 1 1

1/16 5/64 3/32 7/64 1/8

2006-1/16 2006-5/64 2006-3/32 2006-7/64 2006-1/8

12.94

2018-C1

METRIC JOBBER DRILLS – COBALT

1 1 1 1 1

1.00 1.50 2.00 2.50 3.00

2011-1.00 2011-1.50 2011-2.00 2011-2.50 2011-3.00

30.55

2018-C11

FRACTIONAL JOBBER DRILLS – COBALT

1 1 1 1 1

1/16 5/64 3/32 7/64 1/8

2010-1/16 2010-5/64 2010-3/32 2010-7/64 2010-1/8

30.55

2018-C10

METRIC JOBBER DRILLS – BLACK

1 1 1 1 1

1.00 1.50 2.00 2.50 3.00

2003-1.00 2003-1.50 2003-2.00 2003-2.50 2003-3.00

14.29

2018-C13

FRACTIONAL JOBBER DRILLS – BLACK

1 1 1 1 1

1/16 5/64 3/32 7/64 1/8

2000-1/16 2000-5/64 2000-3/32 2000-7/64 2000-1/8

12.94

2018-C12

DOUBLE ENDED PANEL DRILLS – BRIGHT

2 1 1

NO.30 NO.20 NO.11

2345-30 2345-20 2345-11

18.24

2018-C8

SCREWDRIVER BITS & BIT HOLDER

1 1 1 1 1 1

HX5 5300-HX5X25 PZ2 5300-PZ2X25 PH2 5300-PH2X25 PH1 5300-PH1X25 SL5 5300-SL5X25 HOLDER 5350-MH1/4X75

20.80

2018-C3

NUTSETTER & DOUBLE ENDED POWER BIT

1 1

NS5/16 5600-NS5/16X65 PH2/SL2 5500-PH2SL5X45

14.86

2018-C4

PIN CHUCK SET

–

26.57

2018-C5

CHUCK KEY

–

9.87

2018-C7

3 FLUTE COUNTERSINK – COBALT

20.5

3843-20.5

120.94

2018-C6

STORAGE BOX

–

7.24

2018-C9

QTY

SIZE

1 1 1 1 1

FRACTIONAL JOBBER DRILLS – BRIGHT

PAGE 018 18193_Bordo_BuyersGuide_082011_PJ32.indd 18

21/04/12 6:21 PM

DRILLS REDUCED SHANK METRIC CLAM SHELL

COBALT HSS STEEL HIGH SPEED

DIA MM 10.00 10.50 11.00 11.50 12.00 12.50 13.00 13.50 14.00 14.50 15.00 15.50 16.00 16.50 17.00 17.50 18.00 18.50 19.00 19.50 20.00 20.50 21.00 21.50 22.00 22.50 23.00 23.50 24.00 24.50 25.00 26.00 27.00 28.00 29.00 30.00

FL MM 87 87 94 94 101 101 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89 89

HIGH SPEED STEEL CARBIDE TIPPED

OAL MM 133 133 142 142 151 151 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152

PACK QTY 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

$ EACH – – – – – – 39.82 47.18 47.18 50.28 50.74 54.12 54.87 58.23 58.23 62.30 62.30 64.94 64.94 69.05 70.24 75.08 75.08 78.19 78.19 84.92 84.92 89.01 90.44 96.48 96.48 118.49 130.28 139.51 139.51 145.05

HIGH SPEED STEELSTEEL HIGH SPEED

HIGH SPEED STEEL HIGH SPEED STEEL

PART NUMBER – – – – – – 2654-13.00 2654-13.50 2654-14.00 2654-14.50 2654-15.00 2654-15.50 2654-16.00 2654-16.50 2654-17.00 2654-17.50 2654-18.00 2654-18.50 2654-19.00 2654-19.50 2654-20.00 2654-20.50 2654-21.00 2654-21.50 2654-22.00 2654-22.50 2654-23.00 2654-23.50 2654-24.00 2654-24.50 2654-25.00 2654-26.00 2654-27.00 2654-28.00 2654-29.00 2654-30.00

HIGH SPEED STEEL HIGH SPEED STEEL HIGH SPEED STEEL

$ EACH – – – – – – – 47.44 47.44 – – – – – – – – – – – – – – – – – – – – – – – – – – –

HIGH STEEL SPEED STEEL HIGH SPEED

COBALT HSS

PART NUMBER – – – – – – – 2647-13.50 2647-14.00 – – – – – – – – – – – – – – – – – – – – – – – – – – –

CARBIDE TIPPED

$ EACH – 16.81 19.44 20.80 23.07 25.22 26.03 – – – – – – – – – – – – – – – – – – – – – – – – – – – – –

HIGH SPEED STEEL

PART NUMBER – 2647-10.50 2647-11.00 2647-11.50 2647-12.00 2647-12.50 2647-13.00 – – – – – – – – – – – – – – – – – – – – – – – – – – – – –

HIGH SPEED STEEL

1/2" REDUCED SHANK TWIST DRILL

METAL

PLASTIC

HIGH SPEED STEEL

DRILL BIT MATERIALS HIGH SPEED STEEL (HSS) Bordo HSS drills are ground from premium quality M2 high speed steel. HSS can withstand higher operating temperatures than carbon steel without losing its temper (hardness). This property allows HSS to cut faster than high carbon steel, hence the name high speed steel. M2 HSS is an alloyed steel in the tungstenmolybdenum series which typically contains 4% Chromium, 5% Molybdenum, 6% Tungsten, 2% Vanadium and 1% Carbon (approx. by % wt). The material is also subject to high temperature heat treatment to complete the process. HSS steel has a very high wear resistance, a bending strength up to 4700MPa with high toughness and themoplasticity. HSS drills are ideal for general purpose use in a wide variety of ferrous and non-ferrous metals, timber and plastic.

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 19

WWW.BORDO.COM.AU

PAGE 019 21/04/12 6:21 PM

WOOD METAL PLASTIC

REDUCED SHANK

17.00mm

19.05mm

WOOD

BRIGHT/BLACK FINISH These drills are ground and then a black finish is achieved by steam tempering, a thermal process resulting in a porous tool coating. This surface aids chip flow and heat dissipation. The drill is then ground a second time to achieve a bright finish on the shank and cutting edges. REDUCED SHANK

REDUCED SHANK

3/8" REDUCED SHANK TWIST DRILL

HIGH SPEED STEEL

3/4"

WOOD METAL PLASTIC

3/8" REDUCED SHANK TWIST DRILL

12.7mm

1/2"

WOOD METAL PLASTIC

REDUCED SHANK

13.00mm 3/8" REDUCED SHANK TWIST DRILL

WOOD METAL PLASTIC

REDUCED SHANK

MASONRY DRILL

450 RPM SINGLE BRICK

13.0mm

12.7mm

1/2"

COBALT HSS

Stainless 460 RPM Cast Iron 500 RPM Medium Steel 640 RPM

METAL

1/2"

JOBB BRIGHT HSS 118º SPLIT POINT 30º HELIX 3/8" CLAM SHELL

COBALT DRILL

13.0mm Stainless 460 RPM Cast Iron 500 RPM Medium Steel 640 RPM

METAL

COBALT DRILL

13.0mm

14.00mm

Wood 790 RPM Medium Steel 530 RPM Plastic 760 RPM

3/8" REDUCED SHANK TWIST DRILL

WOOD WOOD METAL METAL PLASTICPLASTIC

TWIST DRILL REDUCED SHANK

12.7mm 17.07mm

1/2" 43/64" 14.00mm Wood 790 RPM Medium Steel 530 RPM Plastic 760 RPM

WOOD WOOD METAL METAL

1/2" REDUCED SHANK TWIST DRILL 3/8" REDUCED SHANK TWIST DRILL

WOOD METAL

PLASTIC PLASTIC PLASTIC

REDUCED SHANK REDUCED SHANK TWIST DRILL

17.07mm

17.00mm

43/64"

1/2" REDUCED SHANK TWIST DRILL

WOOD METAL PLASTIC

PDSL BRIGHT / BLACK HSS 118º NOTCHED POINT 30º HELIX 3/8" CLAM SHELL

1/2" REDUCED SHANK TWIST DRILL

WOOD METAL PLASTIC

REDUCED SHANK REDUCED SHANK

19.05mm

3/4" 17.00mm 3/8" REDUCED SHANK TWIST DRILL

REDUCED SHANK SHANK REDUCED

HIGH HIGHSPEED SPEEDSTEEL STEEL

1/2" REDUCED SHANK TWIST DRILL

12.7mm 19.05mm

1/2" 3/4"

WOODWOOD METALMETAL PLASTIC PLASTIC

3/8" 3/8" REDUCED REDUCED SHANK SHANK TWIST TWIST DRILL DRILL

12.7mm

1/2" 13.00mm

HIGH HIGH SPEEDSPEED STEELSTEEL

WOOD WOOD METAL METAL PLASTICPLASTIC

REDUCED SHANK REDUCED SHANK

3/8" REDUCED SHANK TWIST DRILL

WOOD WOOD METAL METAL PLASTIC PLASTIC

3/8" REDUCED SHANK TWIST DRILL

1/2"

13.00mm 13.0mm 450 RPM SINGLE BRICK

3/8" REDUCED SHANK TWIST DRILL

WOOD METAL PLASTIC

REDUCED SHANK MASONRY DRILL

1/2"

13.0mm 1/2" 450 RPM SINGLE BRICK

MASONRY DRILL COBALT DRILL

COBALT CARBIDE TIPPEDHSS

Stainless 460 RPM Cast Iron 500 RPM Medium Steel 640 RPM

12.7mm

COBALT COBALT HSS HSS

METAL

12.7mm

PSDL BRIGHT / BLACK HSS 118º NOTCHED POINT 30º HELIX 1/2" CLAM SHELL

1/2" 13.0mm Stainless 460 RPM Cast Iron 500 RPM Medium Steel 640 RPM

COBALT DRILL COBALT DRILL

METAL METAL

Stainless 460 RPM Cast Iron 500 RPM Medium Steel 640 RPM

13.0mm 13.0mm Wood 790 RPM Medium Steel 530 RPM Plastic 760 RPM

METAL PLASTIC

Stainless 460 RPM Cast Iron 500 RPM Medium Steel 640 RPM

12.7mm

HIGH HIGH SPEEDSPEED STEELSTEEL

METAL WOOD

COBALT DRILL TWIST DRILL

13.0mm 1/2" Wood 790 RPM Medium Steel 530 RPM Plastic 760 RPM

Wood 790 RPM Medium Steel 530 RPM Plastic 760 RPM

1/2"

HIGH SPEED STEEL

WOOD WOOD METAL METAL PLASTIC PLASTIC

TWIST DRILL TWIST DRILL

TWIST DRILL

Wood 790 RPM Medium Steel 530 RPM Plastic 760 RPM

WOOD METAL PLASTIC

12.7mm

GROUP SURFACE FINISH MATERIAL POINT-TYPE FLUTE TYPE SHANK DIAMETER PACKAGING

HIGH SPEED STE

DRILLS REDUCED SHANK FRACTIONAL CLAM SHELL

HIGH SPEED STEEL

COBALT HSS

135º

140º–145º

PAGE 020

CARBIDE TIPPED

DIA INCH 25/64 13/32 27/64 7/16 29/64 15/32 31/64 1/2 17/32 35/64 9/16 37/64 19/32 39/64 5/8 41/64 21/32 43/64 11/16 45/64 23/32 47/64 3/4 49/64 25/32 51/64 13/16 53/64 27/32 55/64 7/8 57/64 29/32 59/64 15/16 61/64 31/32 63/64 1 1-1/16 1-3/32* 1-1/8 1-5/32* 1-3/16 1-7/32* 1-1/4

HIGH SPEED STEEL

MM 9.92 10.32 10.72 11.11 11.51 11.91 12.30 12.70 13.49 13.89 14.29 14.68 15.08 15.48 15.88 16.27 16.67 17.06 17.46 17.86 18.26 18.65 19.05 19.45 19.84 20.24 20.64 21.03 21.43 21.83 22.23 22.62 23.02 23.42 23.81 24.21 24.61 25.00 25.40 26.99 27.78 28.58 29.37 30.16 30.96 31.75

FL MM 95 98 100 103 106 110 111 114 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86

HIGH SPEED STEELHIGH SPEED STEEL HIGH SPEED STEEL

OAL MM 130 133 137 140 143 146 149 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152 152

PACK QTY 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

$ EACH – – – – – – – – 45.35 51.58 47.27 51.14 50.65 58.03 53.99 54.67 58.03 58.03 62.11 62.11 62.11 70.96 64.71 68.81 68.81 82.04 74.72 74.72 74.72 77.85 77.85 84.56 84.56 97.28 88.63 96.01 96.01 96.01 96.01 125.41 132.55 141.95 176.60 147.59 192.00 160.41

HIGHHSS SPEED STEEL COBALT

HIGH SPEED STEEL HIGH SPEED STEEL CARBIDE TIPPED HIGH SPEED STEEL

PART NUMBER – – – – – – – – 2651-17/32 2651-35/64 2651-9/16 2651-37/64 2651-19/32 2651-39/64 2651-5/8 2651-41/64 2651-21/32 2651-43/64 2651-11/16 2651-45/64 2651-23/32 2651-47/64 2651-3/4 2651-49/64 2651-25/32 2651-51/64 2651-13/16 2651-53/64 2651-27/32 2651-55/64 2651-7/8 2651-57/64 2651-29/32 2651-59/64 2651-15/16 2651-61/64 2651-31/32 2651-63/64 2651-1 2651-1.1/16 2651-1.3/32 2651-1.1/8 2651-1.5/32 2651-1.3/16 2651-1.7/32 2651-1.1/4

HIGH SPEED STEEL HIGH SPEED STEEL

$ EACH – – – – – – – – – – 47.51 – – – 57.48 – – – – – – – 68.57 – – – – – – – – – – – – – – – – – – – – – – –

HIGHHSS SPEED STEEL COBALT

PART NUMBER – – – – – – – – – – 2646-9/16 – – – 2646-5/8 – – – – – – – 2646-3/4 – – – – – – – – – – – – – – – – – – – – – – –

HIGH SPEED STEEL HIGH SPEED STEEL

$ EACH 14.44 15.21 16.73 18.93 20.74 22.25 24.63 25.14 – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –

HIGHSTEEL SPEED STEEL HIGH SPEED

HIGH SPEED STEEL

PART NUMBER 2646-25/64 2646-13/32 2646-27/64 2646-7/16 2646-29/64 2646-15/32 2646-31/64 2646-1/2 – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:21 PM

WOOD METAL PLASTIC

REDUCED SHANK

3/8" REDUCED SHANK TWIST DRILL

REDUCED SHANK

17.00mm

METAL PLASTIC

1/2" REDUCED SHANK TWIST DRILL

19.05mm

WOOD

3/4"

WOOD METAL PLASTIC

REDUCED SHANK

12.7mm

14.00mm

1/2" 3/8" REDUCED SHANK TWIST DRILL

3/8" REDUCED SHANK TWIST DRILL

WOOD WOOD METAL METAL PLASTICPLASTIC

REDUCED SHANK REDUCED SHANK

17.07mm

13.00mm 43/64"

WOOD METAL PLASTIC

3/8" REDUCED SHANK TWIST DRILL 1/2" REDUCED SHANK TWIST DRILL

1/2"

COBALT HSS HIGH SPEED STEELCARBIDE TIPPED

WOOD METAL PLASTIC

REDUCED SHANK REDUCED SHANK

17.00mm

13.0mm 450 RPM SINGLE BRICK

REDUCED SHANK

PLASTIC

JOBB BRIGHT HSS 118º SPLIT POINT 30º HELIX 3/8" CLAM SHELL

MASONRY 1/2" REDUCED SHANK TWIST DRILLDRILL

12.7mm

1/2"

WOOD

METAL

Stainless 460 RPM Cast Iron 500 RPM Medium Steel 640 RPM

19.05mm

3/4"

13.0mm

METAL

COBALT DRILL

COBALT DRILL REDUCED SHANK

Stainless 460 RPM Cast Iron 500 RPM Medium Steel 640 RPM

METAL

3/8" REDUCED SHANK TWIST DRILL

12.7mm

13.0mm 1/2" Wood 790 RPM Medium Steel 530 RPM Plastic 760 RPM

METAL WOOD

PLASTIC

3/8" REDUCED SHANK TWIST DRILL

WOODWOOD METALMETAL PLASTIC PLASTIC

TWIST DRILL REDUCED SHANK

12.7mm

1/2" 13.00mm

14.00mm

TWIST DRILL 3/8" REDUCED SHANK TWIST DRILL SHANK REDUCED

450 RPM SINGLE BRICK

METALMETAL

PLASTIC PLASTIC

Wood 790 RPM Medium Steel 530 RPM Plastic 760 RPM

WOODWOOD

METAL

PLASTIC

REDUCED SHANK

MASONRY DRILL

PDSL BRIGHT / BLACK HSS 118º NOTCHED POINT 30º HELIX 3/8" CLAM SHELL

3/8" REDUCED SHANK TWIST DRILL

1/2"

13.0mm

17.07mm

12.7mm

1/2"

WOOD

43/64"

Stainless 460 RPM Cast Iron 500 RPM Medium Steel 640 RPM

METAL PLASTIC

1/2" REDUCED SHANK TWIST DRILL

METAL WOOD

COBALT DRILL REDUCED SHANK

17.00mm 13.0mm Stainless 460 RPM Cast Iron 500 RPM Medium Steel 640 RPM

HIGH SPEED STEELHSS COBALT

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 20

1/2" REDUCED SHANK TWIST DRILL

REDUCED SHANK

3/8" REDUCED SHANK TWIST DRILL TWIST DRILL

HIGH SPEED STEEL

METAL

WOOD METAL PLASTIC

COBALT DRILL

19.05mm

3/4"

REDUCED SHANK

3/8" REDUCED SHANK TWIST DRILL

PLASTIC

13.0mm

WOOD

METAL

PLASTIC

Wood 790 RPM Medium Steel 530 RPM Plastic 760 RPM

12.7mm

1/2"

WOOD

METAL

Wood 790 RPM Medium Steel 530 RPM Plastic 760 RPM

12.7mm

WOOD METAL PLASTIC

TWIST DRILL

1/2"

WOOD METAL PLASTIC

REDUCED SHANK

13.00mm

PSDL BRIGHT/ BLACK HSS 118º NOTCHED POINT 30º HELIX 1/2" CLAM SHELL

3/8" REDUCED SHANK TWIST DRILL

WOOD METAL PLASTIC

REDUCED SHANK

450 RPM SINGLE BRICK

13.0mm

12.7mm

MASONRY DRILL

COBALT DRILL

Notched Point A variation on standard chisel point providing faster starting and reduced drill wander. Suitable for general purpose drilling.

1/2"

METAL

Stainless 460 RPM Cast Iron 500 RPM Medium Steel 640 RPM

METAL

13.0mm

125º–135º

Stainless 460 RPM Cast Iron 500 RPM Medium Steel 640 RPM

13.0mm Wood 790 RPM Medium Steel 530 RPM Plastic 760 RPM

TWIST DRILL

12.7mm

1/2" Wood 790 RPM Medium Steel 530 RPM Plastic 760 RPM

STEEL

WOOD METAL PLASTIC

1/2"

GROUP SURFACE FINISH MATERIAL POINT-TYPE FLUTE TYPE SHANK DIAMETER PACKAGING

118º

HIGH SPEED STE

DRILLS REDUCED SHANK SETS MERCHANDISERS

GROUP SURFACE FINISH MATERIAL POINT TYPE FLUTE TYPE SHANK DIAMETER PACKAGING

PDSL BRIGHT/ BLACK HSS 118º NOTCHED POINT 30º HELIX 1/2" SET

SET DESCRIPTION SET CONTENTS REDUCED SHANK METRIC 16, 18, 22, 25mm REDUCED SHANK METRIC 14, 15, 16, 16.5, 18, 20, 22, 25mm REDUCED SHANK FRACTIONAL 5/8", 3/4", 7/8", 1" REDUCED SHANK FRACTIONAL 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1"

DRILLS QTY

$ SET

PART NUMBER

$ SET

PART NUMBER

303.69

2654-S1

–

565.33

2654-S2

–

303.69

2651-S1

–

565.33

2651-S2

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 21

PDSL BRIGHT / BLACK HSS 118º NOTCHED POINT 30º HELIX 1/2" SET

WWW.BORDO.COM.AU

DRILL BIT SURFACE TREATMENT BRIGHT/BLACK FINISH These drills are ground and then a black finish is achieved by steam tempering, a thermal process resulting in a porous tool coating. This surface aids chip flow and heat dissipation. The drill is then ground a second time to achieve a bright finish on the shank and cutting edges. DRILL BIT MATERIALS HIGH SPEED STEEL (HSS) Bordo HSS drills are ground from premium quality M2 high speed steel. HSS can withstand higher operating temperatures than carbon steel without losing its temper (hardness). This property allows HSS to cut faster than high carbon steel, hence the name high speed steel. M2 HSS is an alloyed steel in the tungstenmolybdenum series which typically contains 4% Chromium, 5% Molybdenum, 6% Tungsten, 2% Vanadium and 1% Carbon (approx. by % wt). The material is also subject to high temperature heat treatment to complete the process. HSS steel has a very high wear resistance, a bending strength up to 4700MPa with high toughness and themoplasticity. HSS drills are ideal for general purpose use in a wide variety of ferrous and non-ferrous metals, timber and plastic.

PAGE 021 21/04/12 6:22 PM

DRILLS REDUCED SHANK MERCHANDISERS

118º

GROUP SURFACE FINISH MATERIAL POINT TYPE FLUTE TYPE SHANK DIAMETER PACKAGING

PDSL BRIGHT/ BLACK HSS 118º NOTCHED POINT 30º HELIX 1/2" SET

PDSL BRIGHT / BLACK HSS 118º NOTCHED POINT 30º HELIX 1/2" SET

125º–135º

Notched Point A variation on standard chisel point providing faster starting and reduced drill wander. Suitable for general purpose drilling.

135º

MERCHANDISER TYPE METRIC FRACTIONAL 140º–145º

MERCHANDISER CONTENTS

PAGE 022

$ MERCHANDISER 894.75

QTY EACH 2 2 2 2 2 1 1 1 1 1

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 22

SIZE MM 14.00 14.50 15.00 16.00 16.50 18.00 19.00 20.00 22.00 25.00

PART NUMBER 2654-D1

PART NUMBER 2654-14.00 2654-14.50 2654-15.00 2654-16.00 2654-16.50 2654-18.00 2654-19.00 2654-20.00 2654-22.00 2654-25.00

$ MERCHANDISER

PART NUMBER

946.02

2651-D1

QTY EACH 2 2 2 2 2 1 1 1 1 1

SIZE INCH 9/16 19/32 5/8 21/32 11/16 3-4 13/16 7/8 15/16 1

PART NUMBER 2651-9/16 2651-19/32 2651-5/8 2651-21/32 2651-11/16 2651-3/4 2651-13/16 2651-7/8 2651-15/16 2651-1

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:22 PM

DRILLS LONG SERIES METRIC BULK & HANG SELL

GROUP SURFACE FINISH MATERIAL POINT-TYPE FLUTE TYPE PACKAGING

LONG BLACK HSS 118º STD CHISEL 30º HELIX BULK

LONG BLACK HSS 118º STD CHISEL 30º HELIX HANG SELL

NEW PACKAGING

METRIC LONG SERIES

OAL MM 56 70 85 95 100 106 112 119 126 132 139 139 148 156 156 165 165 175 175 184 184 195 195 205 205 205

PACK QTY 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5

$ EACH 5.29 5.29 5.29 5.29 6.07 6.57 6.57 7.42 11.19 13.10 13.75 15.53 16.67 19.96 23.31 23.98 25.75 31.23 34.21 40.43 43.10 50.09 54.78 62.84 68.46 73.73

PART NUMBER 2501-1.00 2501-1.50 2501-2.00 2501-2.50 2501-3.00 2501-3.30 2501-3.50 2501-4.00 2501-4.50 2501-5.00 2501-5.50 2501-6.00 2501-6.50 2501-7.00 2501-7.50 2501-8.00 2501-8.50 2501-9.00 2501-9.50 2501-10.00 2501-10.50 2501-11.00 2501-11.50 2501-12.00 2501-12.50 2501-13.00

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 23

PACK QTY 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

$ EACH 5.82 5.82 5.82 5.82 6.58 7.10 7.10 7.93 11.70 13.63 14.27 16.04 17.18 20.48 23.81 24.50 26.28 31.74 34.73 40.94 43.62 50.61 55.30 63.37 68.99 74.25

WWW.BORDO.COM.AU

12.7mm

1/2" Point Type 135º Split Point FL 114 MM OAL 305 MM

12.70mm

1/2" Point Type 118º Chisel Point FL 134 MM OAL 205 MM

PART NUMBER 2501-1.00S 2501-1.50S 2501-2.00S 2501-2.50S 2501-3.00S 2501-3.30S 2501-3.50S 2501-4.00S 2501-4.50S 2501-5.00S 2501-5.50S 2501-6.00S 2501-6.50S 2501-7.00S 2501-7.50S 2501-8.00S 2501-8.50S 2501-9.00S 2501-9.50S 2501-10.00S 2501-10.50S 2501-11.00S 2501-11.50S 2501-12.00S 2501-12.50S 2501-13.00S

PLASTIC

FL MM 33 45 56 62 66 69 73 78 82 87 91 91 97 102 102 109 109 115 115 121 121 128 128 134 134 134

HIGH SPEED STEEL

WOOD METAL

LONG REACH (AIRCRAFT) DRILL

DIA MM 1.00 1.50 2.00 2.50 3.00 3.30 3.50 4.00 4.50 5.00 5.50 6.00 6.50 7.00 7.50 8.00 8.50 9.00 9.50 10.00 10.50 11.00 11.50 12.00 12.50 13.00

PLASTIC

Black finish surface coated HSS long series drill. Designed for general purpose drilling where extra reach is required.

Point Type 118º Chisel Point FL 134 MM OAL 205 MM

HIGH SPEED STEEL

WOOD METAL

LONG SERIES DRILL

PLASTIC

Black finish surface coated HSS long series drill. Designed for general purpose drilling where extra reach is required.

WOOD METAL

13.0mm

DIN340

HSS jobber drills are ideal for general purpose use in a wide variety of ferrous and nonferrous metals, timber and plastic.

PAGE 023 21/04/12 6:22 PM

DRILLS LONG SERIES FRACTIONAL BULK & HANG SELL

DRILL BIT SURFACE TREATMENT BLACK FINISH (also called blue finish) A black finish is achieved by steam tempering, a thermal process resulting in a porous tool coating. This surface helps to keep lubricant on the tool, particularly important on the cutting edges, thus reducing friction and cold welding. The result is increased tool life. Black finish tools are generally recommended for ferrous applications where the oxide layer aids chip flow and heat dissipation.

PAGE 024

HIGH SPEED STEEL

INCH 1/16 5/64 3/32 7/64 1/8 9/64 5/32 11/64 3/16 13/64 7/32 15/64 1/4 17/64 9/32 19/64 5/16 21/64 11/32 23/64 3/8 25/64 13/32 27/64 7/16 29/64 15/32 31/64 1/2

DIA

MM 1.59 1.98 2.38 2.78 3.17 3.57 3.97 4.37 4.76 5.16 5.56 5.95 6.35 6.75 7.14 7.54 7.94 8.33 8.73 9.13 9.52 9.92 10.32 10.72 11.11 11.51 11.91 12.30 12.70

FL MM 50 56 62 66 69 73 78 82 87 87 91 91 97 102 102 109 109 109 115 115 121 121 121 128 128 128 134 134 134

OAL MM 76 85 95 100 106 112 119 126 132 132 139 139 148 156 156 165 165 165 175 175 184 184 184 195 195 195 205 205 205

PACK QTY 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 24

$ EACH 5.29 5.29 5.29 6.07 6.57 6.57 7.42 11.15 11.19 13.10 13.10 13.75 15.53 16.67 19.96 23.31 23.98 25.75 31.23 34.21 34.21 40.43 43.10 50.09 50.09 54.78 62.84 68.46 73.73

PART NUMBER 2500-1/16 2500-5/64 2500-3/32 2500-7/64 2500-1/8 2500-9/64 2500-5/32 2500-11/64 2500-3/16 2500-13/64 2500-7/32 2500-15/64 2500-1/4 2500-17/64 2500-9/32 2500-19/64 2500-5/16 2500-21/64 2500-11/32 2500-23/64 2500-3/8 2500-25/64 2500-13/32 2500-27/64 2500-7/16 2500-29/64 2500-15/32 2500-31/64 2500-1/2

PACK QTY 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

$ EACH 5.82 5.82 5.82 6.58 7.10 7.10 7.93 11.67 11.70 13.63 13.63 14.27 16.04 17.18 20.48 23.81 24.50 26.28 31.74 34.73 34.73 40.94 43.62 50.61 50.61 55.30 63.37 68.99 74.25

12.7mm

1/2" Point Type 135º Split Point FL 114 MM OAL 305 MM

12.70mm

1/2"

HIGH SPEED STEEL

PLASTIC

Black finish surface coated HSS drill with 135° split point for fast penetration and reduced wander. Designed for general purpose drilling where extra reach is required.

Standard Point (chisel point) Standard point is suitable for general purpose drilling.

PLASTIC

WOOD METAL

LONG REACH (AIRCRAFT) DRILL

125º–135º

Black finish surface coated HSS long series drill. Designed for general purpose drilling where extra reach is required.

LONG SERIES DRILL

PLASTIC

WOOD METAL

Point Type 118º Chisel Point FL 134 MM OAL 205 MM

WOOD METAL

118º

Black finish surface coated HSS long series drill. Designed for general purpose drilling where extra reach is required.

ANSI B94-11

LONG SERIES DRILL

FRACTIONAL LONG SERIES

LONG BLACK HSS 118º STD CHISEL 30º HELIX HANG SELL

13.0mm

PACKAGING

LONG BLACK HSS 118º STD CHISEL 30º HELIX BULK

Point Type 118º Chisel Point FL 134 MM OAL 205 MM

NEW

GROUP SURFACE FINISH MATERIAL POINT-TYPE FLUTE TYPE PACKAGING

PART NUMBER 2500-1/16S 2500-5/64S 2500-3/32S 2500-7/64S 2500-1/8S 2500-9/64S 2500-5/32S 2500-11/64S 2500-3/16S 2500-13/64S 2500-7/32S 2500-15/64S 2500-1/4S 2500-17/64S 2500-9/32S 2500-19/64S 2500-5/16S 2500-21/64S 2500-11/32S 2500-23/64S 2500-3/8S 2500-25/64S 2500-13/32S 2500-27/64S 2500-7/16S 2500-29/64S 2500-15/32S 2500-31/64S 2500-1/2S

HIGH SPEED STEEL

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:22 PM

DRILLS LONG SERIES MERCHANDISERS

GROUP SURFACE FINISH MATERIAL POINT-TYPE FLUTE TYPE PACKAGING

LONG BLACK HSS 118º STD CHISEL 30º HELIX HANG SELL

NEW PACKAGING

DRILL BIT MATERIALS

MERCHANDISER TYPE LONG SERIES METRIC – 50 DRILLS LONG SERIES FRACTIONAL – 58 DRILLS MERCHANDISER CONTENTS

$ MERCHANDISER 1,352.66

QTY EACH 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 – – – –

SIZE MM 1.00 1.50 2.00 2.50 3.00 3.50 4.00 4.50 5.00 5.50 6.00 6.50 7.00 7.50 8.00 8.50 9.00 9.50 10.00 10.50 11.00 11.50 12.00 12.50 13.00 – – – –

PART NUMBER 2501-D1

PART NUMBER 2501-1.00S 2501-1.50S 2501-2.00S 2501-2.50S 2501-3.00S 2501-3.50S 2501-4.00S 2501-4.50S 2501-5.00S 2501-5.50S 2501-6.00S 2501-6.50S 2501-7.00S 2501-7.50S 2501-8.00S 2501-8.50S 2501-9.00S 2501-9.50S 2501-10.00S 2501-10.50S 2501-11.00S 2501-11.50S 2501-12.00S 2501-12.50S 2501-13.00S – – – –

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 25

$ MERCHANDISER

PART NUMBER

1,576.50

2500-D1

QTY EACH 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

SIZE INCH 1/16S 5/64S 3/32S 7/64S 1/8S 9/64S 5/32S 11/64S 3/16S 13/64S 7/32S 15/64S 1/4S 17/64S 9/32S 19/64S 5/16S 21/64S 11/32S 23/64S 3/8S 25/64S 13/32S 27/64S 7/16S 29/64S 15/32S 31/64S 1/2S

WWW.BORDO.COM.AU

HIGH SPEED STEEL (HSS) Bordo HSS jobber drills are ground from premium quality M2 high speed steel. HSS can withstand higher operating temperatures than carbon steel without losing its temper (hardness). This property allows HSS to cut faster than high carbon steel, hence the name high speed steel. M2 HSS is an alloyed steel in the tungstenmolybdenum series which typically contains 4% Chromium, 5% Molybdenum, 6% Tungsten, 2% Vanadium and 1% Carbon (approx. by % wt). The material is also subject to high temperature heat treatment to complete the process. HSS steel has a very high wear resistance, a bending strength up to 4700MPa with high toughness and themoplasticity. HSS jobber drills are ideal for general purpose use in a wide variety of ferrous and nonferrous metals, timber and plastic.

PAGE 025 21/04/12 6:22 PM

DRILLS EXTRA DEEP HOLE METRIC BULK

EXTRA DEEP HOLE

DIN1869 130º

125º–135º

UX Point The notched UX point provides self centering, easier penetration, improved hole accuracy and improved load distribution. The special notch geometry gives a corrected rake angle of 15º which provides a strong point for harder materials, as well as preventing snatching with materials such as Aluminium, Brass, Bronze and Plastics.

GROUP SURFACE FINISH MATERIAL POINT-TYPE FLUTE TYPE PACKAGING LENGTH DIA MM 2.00 2.50 3.00 3.50 4.00 4.50 5.00 5.50 6.00 6.50 7.00 7.50 8.00 8.50 9.00 9.50 10.00

PACK QTY 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

XTRA BRONZE HSS-Co5 130º UX POINT 40º HELIX PARABOLIC BULK TUBE SERIES 1 FL MM 90 95 105 115 120 125 135 140 140 150 155 155 165 165 175 175 185

OAL MM 135 140 155 165 175 185 195 205 205 215 225 225 240 240 250 250 265

$ EACH 25.01 25.87 28.11 28.74 31.29 35.03 38.91 41.44 43.12 57.54 60.04 71.06 76.14 79.50 82.88 86.25 91.33

XTRA BRONZE HSS-Co5 130º UX POINT 40º HELIX PARABOLIC BULK TUBE SERIES 2

PART NUMBER 2503-2.00X135 2503-2.50X140 2503-3.00X155 2503-3.50X165 2503-4.00X175 2503-4.50X185 2503-5.00X195 2503-5.50X205 2503-6.00X205 2503-6.50X215 2503-7.00X225 2503-7.50X225 2503-8.00X240 2503-8.50X240 2503-9.00X250 2503-9.50X250 2503-10.00X265

FL MM – – 135 145 150 160 170 180 180 190 200 200 210 210 220 220 235

OAL MM – – 200 210 220 235 245 260 260 275 290 290 305 305 320 320 340

$ PART EACH NUMBER – – – – 30.45 2503-3.00X200 32.99 2503-3.50X210 34.67 2503-4.00X220 41.44 2503-4.50X235 43.12 2503-5.00X245 47.38 2503-5.50X260 48.20 2503-6.00X260 62.57 2503-6.50X275 65.95 2503-7.00X290 75.28 2503-7.50X290 83.72 2503-8.00X305 87.11 2503-8.50X305 92.20 2503-9.00X320 96.42 2503-9.50X320 103.19 2503-10.00X340

XTRA BRONZE HSS-Co5 130º UX POINT 40º HELIX PARABOLIC BULK TUBE SERIES 3 FL MM – – – 180 190 200 210 225 225 235 250 250 235 280 280 280 295

OAL MM – – – 265 280 295 315 330 330 350 370 370 390 390 410 410 430

$ PART EACH NUMBER – – – – – – 37.22 2503-3.50X265 38.07 2503-4.00X280 45.67 2503-4.50X295 34.70 2503-5.00X315 52.44 2503-5.50X330 53.29 2503-6.00X330 70.24 2503-6.50X350 76.14 2503-7.00X370 86.25 2503-7.50X370 93.88 2503-8.00X390 97.24 2503-8.50X390 106.55 2503-9.00X410 110.80 2503-9.50X410 121.79 2503-10.00X430

DRILL BIT MATERIALS HSS-Co5 (COBALT) Bordo cobalt jobber drills are manufactured from HSS-Co5 steel which is very similar to M2 HSS with the important addition of 5% cobalt. The addition of cobalt to to M2 HSS significantly increases heat resistance and allows the drill to run at higher temperatures without losing its temper (hardness). Cobalt drills provide increased performance and tool life when machining tough steels. HSS-Co5 (Cobalt) jobber drills are ideal for use in drilling stainless steel and high tensile steel. They are NOT suitable for deep hole drilling in wood.

PAGE 026

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 26

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:22 PM

DRILLS LONG REACH (AIRCRAFT) FRACTIONAL CLAM SHELL

PLASTIC

12.7mm

1/2" Point Type 135º Split Point FL 114 MM OAL 305 MM

METAL

INCH 1/8 3/16 1/4 5/16 3/8 7/16 1/2

DIA

MM 3.17 4.76 6.35 7.94 9.52 11.11 12.70

LONG BLACK HSS 135º SPLIT POINT 30º HELIX HANG SELL

FL MM 114 114 114 114 114 114 114

OAL MM 305 305 305 305 305 305 305

PACK QTY 1 1 1 1 1 1 1

$ EACH 23.64 44.51 48.19 66.48 82.09 92.24 106.07

PART NUMBER 2502-1/8 2502-3/16 2502-1/4 2502-5/16 2502-3/8 2502-7/16 2502-1/2

USAGE Long Reach Drills are suitable for all general purpose drilling where extra reach is required. They are suitable for drilling: Wood – All types Plastic – All types Metal – Brass, Steel, Aluminium and Stainless Steel at reduced speed using cutting fluid Long Reach Drills have self centering 135º Split Point for fast penetration and reduced end thrust. They are ideal for cutting harder steel materials and minimise work hardening of the substrate. These drills feature a black finish (also called blue finish).

HIGH SPEED STEEL

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 27

NEW PRODUCT

WARNING Long Reach Drillls are not designed to drill deep holes. Maximum hole depth must be less than the flute length (FL) of the drill. Deep hole drilling requires the use of a Bordo Long Series Drill, Bordo Extra Deep Hole Drill or Bordo Auger Bit depending on the material being drilled.

Black finish surface coated HSS drill with 135° split point for fast penetration and reduced wander. Designed for general purpose drilling where extra reach is required.

1/2"

HIGH SPEED STEEL

WOOD

LONG REACH (AIRCRAFT) DRILL

LONG SERIES DRILL

PLASTIC

Point Type 118º Chisel Point FL 134 MM OAL 205 MM

METAL

Black finish surface coated HSS long series drill. Designed for general purpose drilling where extra reach is required.

WOOD

12.70mm

GROUP SURFACE FINISH MATERIAL POINT-TYPE FLUTE TYPE PACKAGING

WWW.BORDO.COM.AU

PAGE 027 21/04/12 6:22 PM

DRILLS COLOUR BAND BLUE METRIC BULK

METRIC JOBBER DRILLS

DIN338 118º

GROUP SURFACE FINISH MATERIAL POINT-TYPE FLUTE TYPE DRILL LENGTH / TAP THREAD PACKAGING

CBJB VIOLET / GREY HSS-Co TiAlN COATED MULTI FACETED 35º HELIX STANDARD SNAP PACK

CBTP VIOLET / GREY HSSE-V3 TiAlN COATED STRAIGHT SPIRAL POINT METRIC COARSE SNAP/TELESCOPIC PACK

CBTP VIOLET / GREY HSSE-V3 TiAlN COATED SPIRAL FLUTE SPIRAL 40º HELIX METRIC COARSE SNAP/TELESCOPIC PACK

$ EACH – 27.36 – 29.51 – – – 35.53 – 37.85 – – – 39.94 – – – – 53.06 – – – 89.07 – 103.91 –

$ EACH – 33.11 – 34.99 – – – 42.77 – 45.9 – – – 56.62 – – – – 71.01 – – – 105.98 – 123.65 –

140º–145º

Multi Faceted Point The multi faceted point was specifically developed to enable higher load carrying capacity and to enhance feed rates during the machining of difficult materials such as stainless steel.

DRILL BIT SURFACE TREATMENT VIOLET / GREY - TiAlN (Titanium Aluminium Nitride – TiAlN) A violet/grey finish with a higher hardness than both TiN and TiCN coating utilises aluminium in the coating which imparts greater oxidation stability. This stability is a result of a very thin film (of Aluminium Oxide) which is formed on the surface of the TiAlN. This film is self repairing which leads to increased tool service life. This high performance coating is able to withstand much higher temperatures which allows increased speeds and feeds and semi-dry machining operations. TiAlN coating is especially useful when machining cast iron and tough steels.

DIA MM 2.00 2.50 3.00 3.30 3.50 3.70 4.00 4.20 4.50 5.00 5.50 6.00 6.50 6.80 7.00 7.50 7.80 8.00 8.50 9.00 9.50 10.00 10.20 11.00 12.00 13.00

FL MM 24 30 33 36 39 39 43 43 47 52 57 57 63 69 69 69 75 75 75 81 81 87 87 94 101 101

OAL MM 49 57 61 65 70 70 75 75 80 86 93 93 101 109 109 109 117 117 117 125 125 133 133 142 151 151

PACK QTY 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

$ EACH 21.33 21.82 22.37 22.77 23.65 24.37 25.09 25.98 26.60 28.28 30.53 34.61 37.08 39.15 39.32 41.56 42.27 42.58 47.31 48.98 52.42 55.05 57.61 63.85 69.51 81.66

PART NUMBER 2050-2.00 2050-2.50 2050-3.00 2050-3.30 2050-3.50 2050-3.70 2050-4.00 2050-4.20 2050-4.50 2050-5.00 2050-5.50 2050-6.00 2050-6.50 2050-6.80 2050-7.00 2050-7.50 2050-7.80 2050-8.00 2050-8.50 2050-9.00 2050-9.50 2050-10.00 2050-10.20 2050-11.00 2050-12.00 2050-13.00

PART NUMBER – 3150-3.00 – 3150-4.00 – – – 3150-5.00 – 3150-6.00 – – – 3150-8.00 – – – – 3150-10.00 – – – 3150-12.00 – 3150-14.00 –

PART NUMBER – 3250-3.00 – 3250-4.00 – – – 3250-5.00 – 3250-6.00 – – – 3250-8.00 – – – – 3250-10.00 – – – 3250-12.00 – 3250-14.00 –

for the complete range of Colour Band Taps see Page 116

PAGE 028

SIZE X PITCH MM – M3.00 x 0.5 – M4.00 x 0.7 – – – M5.00 x 0.8 – M6.00 x 1.0 – – – M8.00 x 1.25 – – – – M10.00 x 1.5 – – – M12.00 x 1.75 – M14.00 x 2.0

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 28

MACHINED HARDNESS MATERIAL Brinell N/mm2 DRILLING – COPPER Free Cutting <250 861 Austenitic <250 861 Martensitic, Ferritic >300 971 DRILLING – TITANIUM Pure, Unalloyed <200 758 Titanium Alloys >300 971 DRILLING – NICKEL Pure, Unalloyed <300 971

SPEED m/min

FEED RATE FOR DIAMETER (MM) 6 8 10 12 16

12-22 0.08 10-15 0.08 12-18 0.06

0.11 0.11 0.08

0.12 0.12 0.09

0.16 0.16 0.12

0.19 0.19 0.14

0.20 0.20 0.15

0.24 0.24 0.16

0.28 0.28 0.21

20-32 0.06 06-12 0.06

0.08 0.08

0.09 0.09

0.12 0.12

0.14 0.14

0.15 0.15

0.16 0.16

0.21 0.21

10-15 0.08

0.11

0.12

0.16

0.19

0.20

0.24

0.28

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:22 PM

DRILLS COLOUR BAND BLUE –STUB METRIC BULK

GROUP SURFACE FINISH MATERIAL POINT-TYPE FLUTE TYPE DRILL LENGTH / TAP THREAD PACKAGING

CBJB VIOLET / GREY HSS-CO TiAlN COATED MULTI FACETED 35º HELIX STUB SNAP PACK

CBTP VIOLET / GREY HSSE-V3 TiAlN COATED SPIRAL POINT STRAIGHT METRIC COARSE SNAP/TELESCOPIC PACK

CBTP VIOLET / GREY HSSE-V3 TiAlN COATED SPIRAL FLUTE SPIRAL 40º HELIX METRIC COARSE SNAP/TELESCOPIC PACK

METRIC STUB DRILLS

DIN1897 118º

140º–145º

DIA MM 2.00 2.50 3.00 3.30 3.50 3.70 4.00 4.20 4.50 5.00 5.50 6.00 6.50 6.80 7.00 7.50 7.80 8.00 8.50 9.00 9.50 10.00 10.20 11.00 12.00 13.00

FL MM 12 14 16 18 20 20 22 22 24 26 28 28 31 34 34 34 37 37 37 40 40 43 43 47 51 51

OAL MM 38 43 46 49 52 52 55 55 58 62 66 66 70 74 74 74 79 79 79 84 84 89 89 95 102 102

PACK QTY 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

$ EACH 19.18 19.38 19.90 20.61 20.94 21.25 21.97 22.29 22.37 23.34 24.85 28.68 31.64 32.76 33.16 34.29 34.44 35.16 38.83 40.19 42.02 43.70 45.78 49.31 53.14 61.77

PART NUMBER 2051-2.00 2051-2.50 2051-3.00 2051-3.30 2051-3.50 2051-3.70 2051-4.00 2051-4.20 2051-4.50 2051-5.00 2051-5.50 2051-6.00 2051-6.50 2051-6.80 2051-7.00 2051-7.50 2051-7.80 2051-8.00 2051-8.50 2051-9.00 2051-9.50 2051-10.00 2051-10.20 2051-11.00 2051-12.00 2051-13.00

SIZE X PITCH MM – M3.00 x 0.5 – M4.00 x 0.7 – – – M5.00 x 0.8 – M6.00 x 1.0 – – – M8.00 x 1.25 – – – – M10.00 x 1.5 – – – M12.00 x 1.75 – M14.00 x 2.0

$ EACH – 27.36 – 29.51 – – – 35.53 – 37.85 – – – 39.94 – – – – 53.06 – – – 89.07 – 103.91 –

PART NUMBER – 3150-3.00 – 3150-4.00 – – – 3150-5.00 – 3150-6.00 – – – 3150-8.00 – – – – 3150-10.00 – – – 3150-12.00 – 3150-14.00 –

$ EACH – 33.11 – 34.99 – – – 42.77 – 45.9 – – – 56.62 – – – – 71.01 – – – 105.98 – 123.65 –

PART NUMBER – 3250-3.00 – 3250-4.00 – – – 3250-5.00 – 3250-6.00 – – – 3250-8.00 – – – – 3250-10.00 – – – 3250-12.00 – 3250-14.00 –

for the complete range of Colour Band Taps see Page 116

SPEED m/min

FEED RATE FOR DIAMETER (MM) 6 8 10 12 16

12-22 0.08 10-15 0.08 12-18 0.06

0.11 0.11 0.08

0.12 0.12 0.09

0.16 0.16 0.12

0.19 0.19 0.14

0.20 0.20 0.15

0.24 0.24 0.16

0.28 0.28 0.21

20-32 0.06 06-12 0.06

0.08 0.08

0.09 0.09

0.12 0.12

0.14 0.14

0.15 0.15

0.16 0.16

0.21 0.21

10-15 0.08

0.11

0.12

0.16

0.19

0.20

0.24

0.28

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 29

WWW.BORDO.COM.AU

PAGE 029 21/04/12 6:22 PM

DRILLS COLOUR BAND RED METRIC BULK

METRIC JOBBER DRILLS

DIN338 130º

GROUP SURFACE FINISH MATERIAL POINT-TYPE FLUTE TYPE THREAD PACKAGING

CBJB VIOLET / GREY HSS-Co TiAlN COATED 130º UX 33º HELIX PARABOLIC – SNAP PACK

CBTP VIOLET / GREY HSSE-EV TiAlN COATED SPIRAL POINT STRAIGHT METRIC COARSE SNAP/TELEPACK

CBTP VIOLET / GREY HSSE-EV TIALN COATED SPIRAL FLUTE SPIRAL 15º HELIX METRIC COARSE SNAP/TELEPACK

$ EACH – 27.69 – – 30.18 – – – – 34.07 – 35.68 – – – 45.55 – – – 60.78 – – – 86.31 – – 103.64 –

$ EACH – 29.15 – – 30.95 – – – – 36.17 – 38.25 – – – 47.57 – – – 61.83 – – – 88.91 – – 106.74 –

125º–135º

UX Point The notched UX point provides self centering, easier penetration, improved hole accuracy amd improved load distribution. The special notch geometry gives a corrected rake angle of 15º which provides a strong point for harder materials, as well as preventing snatching with materials such as Aluminium, Brass, Bronze and Plastics.

DRILL BIT SURFACE TREATMENT VIOLET / GREY (Titanium Aluminium Nitride – TiAlN) A violet/grey finish with a higher hardness than both TiN and TiCN coating utilises aluminium in the coating which imparts greater oxidation stability. This stability is a result of a very thin film (of Aluminium Oxide) which is formed on the surface of the TiAlN. This film is self repairing which leads to increased tool service life. This high performance coating is able to withstand much higher temperatures which allows increased speeds and feeds and semi-dry machining operations. TiAlN coating is especially useful when machining cast iron and tough steels.

PAGE 030

DIA MM 2.00 2.50 3.00 3.20 3.30 3.50 3.70 4.00 4.10 4.20 4.50 5.00 5.50 6.00 6.50 6.80 7.00 7.50 8.00 8.50 9.00 9.50 10.00 10.20 10.50 11.00 12.00 13.00

FL MM 24 30 33 36 36 39 39 43 43 43 47 52 57 57 63 69 69 69 75 75 81 81 87 87 87 94 101 101

OAL MM 49 57 61 65 65 70 70 75 75 75 80 86 93 93 101 109 109 109 117 117 125 125 133 133 133 142 151 151

PACK QTY 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

$ EACH 9.16 9.16 10.58 11.55 11.55 12.32 13.19 13.73 14.49 14.60 15.26 17.33 20.49 21.91 24.41 28.11 28.11 31.17 33.01 35.31 38.56 41.73 44.78 49.14 51.00 55.15 62.54 71.70

PART NUMBER 2052-2.00 2052-2.50 2052-3.00 2052-3.20 2052-3.30 2052-3.50 2052-3.70 2052-4.00 2052-4.10 2052-4.20 2052-4.50 2052-5.00 2052-5.50 2052-6.00 2052-6.50 2052-6.80 2052-7.00 2052-7.50 2052-8.00 2052-8.50 2052-9.00 2052-9.50 2052-10.00 2052-10.20 2052-10.50 2052-11.00 2052-12.00 2052-13.00

SIZE X PITCH MM – M3.00 x 0.5 – – M4.00 x 0.7 – – – – M5.00 x 0.8 – M6.00 x 1.0 – – – M8.00 x 1.25 – – – M10.00 x 1.5 – – – M12.00 x 1.75 – – M14.00 x 2.0 –

PART NUMBER – 3152-3.00 – – 3152-4.00 – – – – 3152-5.00 – 3152-6.00 – – – 3152-8.00 – – – 3152-10.00 – – – 3152-12.00 – – 3152-14.00 –

PART NUMBER – 3252-3.00 – – 3252-4.00 – – – – 3252-5.00 – 3252-6.00 – – – 3252-8.00 – – – 3252-10.00 – – – 3252-12.00 – – 3252-14.00 –

for the complete range of Colour Band Taps see Page 116

TOUGH TREATABLE STEEL RED BAND The mechanical properties of materials are influenced diversely by the addition of alloying elements and heat treatment processes, resulting in some high-strength, quenched and tempered steels or hardened steels. This range has its own unique set of machining requirements which are satisified by the Red Band Series. TiAlN coating increases tool surface hardness to 87Rc. For machining materials with Hardness < 470 HB : Tensile Strength <1500 N/mm2

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 30

MACHINED HARDNESS SPEED MATERIAL Brinell N/mm2 m/min DRILLING – COPPER High Tensile Bronze <350 1144 15-28 DRILLING – CARBON ALLOY STEELS Low Alloy Steel >250 861 25-30 Alloyed, Heat Treated >300 971 15-20 Alloyed, Heat Treated >350 1144 10-15 DRILLING – NICKEL Nimonic 75 >300 971 06-10 Iconel 718 Alloy <350 1144 04-08

FEED RATE FOR DIAMETER (MM) 6 8 10 12 16

0.06

0.08

0.09

0.12

0.14

0.15

0.16

0.21

0.06 0.04 0.04

0.08 0.06 0.06

0.09 0.06 0.06

0.12 0.07 0.07

0.14 0.10 0.10

0.15 0.11 0.11

0.16 0.13 0.13

0.21 0.16 0.16

0.06 0.04

0.08 0.06

0.09 0.06

0.12 0.07

0.14 0.10

0.15 0.11

0.16 0.13

0.21 0.16

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:22 PM

DRILLS COLOUR BAND YELLOW METRIC BULK

GROUP SURFACE FINISH MATERIAL POINT-TYPE FLUTE TYPE THREAD PACKAGING

CBJB BRIGHT HSS 130º NOTCHED 35º HELIX – SNAP PACK

CBTP BRIGHT HSSE-EV SPIRAL POINT STRAIGHT METRIC COARSE SNAP/TELEPACK

CBTP BRIGHT HSSE-EV SPIRAL FLUTE SPIRAL 40º HELIX METRIC COARSE SNAP/TELEPACK

CBTP BRIGHT HSSE-EV ROLL FORM FLUTELESS METRIC COARSE SNAP/TELEPACK

METRIC JOBBER DRILLS

DIN338 130º

125º–135º

DIA MM 2.00 2.50 3.00 3.20 3.30 3.50 3.70 4.00 4.10 4.20 4.50 4.80 5.00 5.50 6.00 6.50 6.80 7.00 7.50 7.80 8.00 8.50 9.00 9.50 10.00 10.20 10.50 11.00 12.00 13.00

FL MM 24 30 33 36 36 39 39 43 43 43 47 52 52 57 57 63 69 69 69 75 75 75 81 81 87 87 87 94 101 101

OAL MM 49 57 61 65 65 70 70 75 75 75 80 86 86 93 93 101 109 109 109 117 117 117 125 125 133 133 133 142 151 151

PACK QTY 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

$ EACH 4.01 4.18 4.58 5.42 5.54 5.68 5.68 5.68 6.26 6.64 6.96 7.61 7.75 8.06 9.42 9.87 10.70 12.18 14.44 15.15 15.41 17.60 19.87 21.08 22.51 22.76 26.24 26.82 31.40 39.13

PART NUMBER 2054-2.00 2054-2.50 2054-3.00 2054-3.20 2054-3.30 2054-3.50 2054-3.70 2054-4.00 2054-4.10 2054-4.20 2054-4.50 2054-4.80 2054-5.00 2054-5.50 2054-6.00 2054-6.50 2054-6.80 2054-7.00 2054-7.50 2054-7.80 2054-8.00 2054-8.50 2054-9.00 2054-9.50 2054-10.00 2054-10.20 2054-10.50 2054-11.00 2054-12.00 2054-13.00

SIZE X PITCH MM – M3.00 x 0.5 – – M4.00 x 0.7 – – – – M5.00 x 0.8 – – M6.00 x 1.0 – – – M8.00 x 1.25 – – – – M10.00 x 1.5 – – – M12.00 x 1.75 – – M14.00 x 2.0 –

$ EACH – 12.77 – – 13.88 – – – – 13.82 – – 14.49 – – – 18.48 – – – – 24.68 – – – 44.39 – – 53.30 –

PART NUMBER – 3154-3.00 – – 3154-4.00 – – – – 3154-5.00 – – 3154-6.00 – – – 3154-8.00 – – – – 3154-10.00 – – – 3154-12.00 – – 3154-14.00 –

$ EACH – 16.61 – – 16.33 – – – – 17.06 – – 16.90 – – – 20.95 – – – – 29.53 – – – 50.80 – – 60.99 –

PART NUMBER – 3254-3.00 – – 3254-4.00 – – – – 3254-5.00 – – 3254-6.00 – – – 3254-8.00 – – – – 3254-10.00 – – – 3254-12.00 – – 3254-14.00 –

$ EACH – 30.76 – – 31.30 – – – – 32.85 – – 33.98 – – – 36.85 – – – – 52.43 – – – – – – – –

PART NUMBER – 3255-3.00 – – 3255-4.00 – – – – 3255-5.00 – – 3255-6.00 – – – 3255-8.00 – – – – 3255-10.00 – – – – – – – –

130º Notched Point The notched point reduces end thrust and optimizes centre cutting efficiency with chisel strength.

for the complete range of Colour Band Taps see Page 116

ALUMINIUM YELLOW BAND The alloying elements which are used to create the myriad of Aluminium Alloys have an effect on the machining properties of the resulting materials. This generally creates a difficult long chip form which has tendencies to stick to the tool, placing a unique set of demands on tooling. Yellow Band Series contends with these difficulties. For machining materials with Hardness < 200 HB : Tensile Strength <700 N/mm2

MACHINED HARDNESS SPEED MATERIAL Brinell N/mm2 m/min DRILLING – ALUMINIUM ALLOYS Wrought & Extruded <150 541 50-60 Wrought & Treated >150 541 35-50 Cast, Low Si <5% <150 541 30-40 Cast, High Si >10% >150 541 23-35 DRILLING – COPPER Pure <100 – 35-55 0.06 Brass, Soft <200 717 40-50 Brass, Bronze >200 717 35-45

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 31

FEED RATE FOR DIAMETER (MM) 6 8 10 12 16

0.12 0.08 0.08 0.08

0.15 0.11 0.11 0.11

0.17 0.12 0.12 0.12

0.22 0.16 0.16 0.16

0.26 0.19 0.19 0.19

0.28 0.20 0.20 0.20

0.32 0.24 0.24 0.24

0.36 0.28 0.28 0.28

0.08 0.15 0.08

0.09 0.19 0.11

0.12 0.21 0.12

0.14 0.28 0.16

0.15 0.33 0.19

0.16 0.35 0.20

0.21 0.40 0.24

0.21 0.45 0.28

WWW.BORDO.COM.AU

PAGE 031 21/04/12 6:22 PM

DRILLS COLOUR BAND GREEN METRIC BULK

METRIC JOBBER DRILLS

DIN338 130º

GROUP SURFACE FINISH MATERIAL POINT-TYPE FLUTE TYPE THREAD PACKAGING

CBJB GOLD COLOURED HSS-CO TiN COATED 130º SPLIT POINT 33º HELIX – SNAP PACK

CBTP GOLD COLOURED HSSE-EV TiN COATED SPIRAL POINT STRAIGHT METRIC COARSE SNAP/TELESCOPIC PACK

CBTP GOLD COLOURED HSSE-EV TiN COATED SPIRAL FLUTE SPIRAL 35º HELIX METRIC COARSE SNAP/TELESCOPIC PACK

$ EACH – 24.68 – – 28.08 – – – – 31.47 – – 35.70 – – – 38.16 – – – – 44.65 – – – 86.93 – – 101.47 –

$ EACH – 34.5 – – 38.47 – – – – 43.63 – – 48.96 – – – 51.59 – – – – 69.15 – – – 89.4 – – 101.98 –

140º–145º

Split Point The 130º Split Point provides self centering and easier penetration. The 33º helix open profile flute design has reinforced web for high rigidity under extreme conditions.

DRILL BIT SURFACE TREATMENT GOLD FINISH (TiN) (Titanium Nitride) A very hard gold coloured surface finish a few microns thick is achieved by Physical Vapour Deposition (PVD). As with all surface coated tools, performance will deteriorate after resharpening. The coating helps to dissipate heat and reduces friction and cold welding. Higher speed and feed rates can be achieved and tool life is greatly increased.

DIA MM 2.00 2.50 3.00 3.20 3.30 3.50 3.70 4.00 4.10 4.20 4.50 4.80 5.00 5.50 6.00 6.50 6.80 7.00 7.50 7.80 8.00 8.50 9.00 9.50 10.00 10.20 10.50 11.00 12.00 13.00

FL MM 24 30 33 36 36 39 39 43 43 43 47 52 52 57 57 63 69 69 69 75 75 75 81 81 87 87 87 94 101 101

OAL MM 49 57 61 65 65 70 70 75 75 75 80 86 86 93 93 101 109 109 109 117 117 117 125 125 133 133 133 142 151 151

PACK QTY 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

$ EACH 5.84 5.98 6.33 6.33 6.33 7.07 7.69 7.69 8.21 8.21 8.43 9.04 9.04 10.89 11.53 13.05 14.69 14.69 16.12 17.19 17.19 19.19 20.74 22.62 24.47 26.31 27.22 29.03 33.05 41.24

PART NUMBER 2056-2.00 2056-2.50 2056-3.00 2056-3.20 2056-3.30 2056-3.50 2056-3.70 2056-4.00 2056-4.10 2056-4.20 2056-4.50 2056-4.80 2056-5.00 2056-5.50 2056-6.00 2056-6.50 2056-6.80 2056-7.00 2056-7.50 2056-7.80 2056-8.00 2056-8.50 2056-9.00 2056-9.50 2056-10.00 2056-10.20 2056-10.50 2056-11.00 2056-12.00 2056-13.00

PART NUMBER – 3156-3.00 – – 3156-4.00 – – – – 3156-5.00 – – 3156-6.00 – – – 3156-8.00 – – – – 3156-10.00 – – – 3156-12.00 – – 3156-14.00 –

PART NUMBER – 3256-3.00 – – 3256-4.00 – – – – 3256-5.00 – – 3256-6.00 – – – 3256-8.00 – – – – 3256-10.00 – – – 3256-12.00 – – 3256-14.00 –

for the complete range of Colour Band Taps see Page 116

CARBON STEEL GREEN BAND The machinability of different carbon steels is as varied as their properties. Soft-tough construction steels place a unique set of demands on the tools.The Green Band Series of drills and taps have been developed specifically for this range of steels. TiN coating increases tool surface hardness to 85Rc. For machining materials with Hardness < 250 HB : Tensile Strength <900 N/mm2

PAGE 032

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 32

MACHINED HARDNESS SPEED MATERIAL Brinell N/mm2 m/min DRILLING – CARBON ALLOY STEELS

FEED RATE FOR DIAMETER (MM) 6 8 10 12 16

Free Cutting Mild Steel <120

420 40-50 0.12

0.15

0.17

0.22

0.26

0.28

0.32

0.36

Low Carbon Steel

<200

758 30-40 0.08

0.11

0.12

0.16

0.19

0.20

0.24

0.28

Medium Carbon Steel <250

861 25-35 0.06

0.08

0.09

0.12

0.14

0.15

0.16

0.21

To convert Surface Metres Per Minute to RPM : RPM = (surface m/min x 318.5) ÷ D where “D” is outside diameter of drill expressed in millimeters

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:22 PM

DRILLS COLOUR BAND WHITE METRIC BULK

GROUP SURFACE FINISH MATERIAL POINT-TYPE FLUTE TYPE THREAD PACKAGING

CBJB GOLD COLOURED HSS-CO TiN COATED 118º / 70º DX 33º HELIX – SNAP PACK

CBTP VIOLET / GREY HSSE-EV TIAIN COATED SPIRAL FLUTE SPIRAL 15º HELIX METRIC COARSE SNAP/TELESCOPIC PACK

METRIC JOBBER DRILLS

DIN338 118º

125º–135º

DIA MM 4.00 4.20 4.50 5.00 5.50 6.00 6.50 6.80 7.00 7.50 8.00 8.50 9.00 9.50 10.00 10.20 10.50 11.00 12.00

FL MM 43 43 47 52 57 57 63 69 69 69 75 75 81 81 87 87 87 94 101

OAL MM 75 75 80 86 93 93 101 109 109 109 117 117 125 125 133 133 133 142 151

PACK QTY 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

$ EACH 7.69 8.21 8.43 9.04 10.89 11.53 13.05 14.69 14.69 16.12 17.19 19.19 20.74 22.62 24.47 26.31 27.22 29.03 33.05

PART NUMBER 2058-4.00 2058-4.20 2058-4.50 2058-5.00 2058-5.50 2058-6.00 2058-6.50 2058-6.80 2058-7.00 2058-7.50 2058-8.00 2058-8.50 2058-9.00 2058-9.50 2058-10.00 2058-10.20 2058-10.50 2058-11.00 2058-12.00

$ EACH – 40.35 – 46.73 – – – 58.15 – – – 71.7 – – – 102.38 – – 118.11

SIZE X PITCH MM – M5.00 x 0.8 – M6.00 x 1.0 – – – M8.00 x 1.25 – – – M10.00 x 1.5 – – – M12.00 x 1.75 – – M14.00 x 2.0

DX Point The double angled DX Point (118º/70º) minimises wear on the outer corners of the drill point in highly abrasive materials such as Cast Iron and Reinforced Plastics. The point is web thinned to enable easier penetration.

PART NUMBER – 3258-5.00 – 3258-6.00 – – – 3258-8.00 – – – 3258-10.00 – – – 3258-12.00 – – 3258-14.00

DRILL BIT SURFACE TREATMENT

for the complete range of Colour Band Taps see Page 116

CAST IRON WHITE BAND A highly abrasive material with damping and thermal conductivity, high strength and resistance to wear. Cast Iron is used extensively for mass produced components.The White Band Series is designed for this specific purpose. TiAlN coating increases tool surface hardness to 87Rc. For machining materials with Hardness < 300 HB : Tensile Strength <1000 N/mm2

MACHINED HARDNESS SPEED MATERIAL Brinell N/mm2 m/min DRILLING – CAST IRON

FEED RATE FOR DIAMETER (MM) 6 8 10 12 16

Plain Grey Irons

<150

541 35-45 0.12

0.15

0.17

0.22

0.26

0.28

0.32

Plain SG Iron

<250

861 23-35 0.06

0.08

0.09

0.12

0.14

0.15

0.16

0.21

Alloy SG Iron Nickel

>250

861 15-28 0.06

0.08

0.09

0.12

0.14

0.15

0.16

0.21

0.36

To convert Surface Metres Per Minute to RPM : RPM = (surface m/min x 318.5) ÷ D where “D” is outside diameter of drill expressed in millimeters

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 33

VIOLET / GREY (Titanium Aluminium Nitride – TiAlN) A violet/grey finish with a higher hardness than both TiN and TiCN coating utilises aluminium in the coating which imparts greater oxidation stability. This stability is a result of a very thin film (of Aluminium Oxide) which is formed on the surface of the TiAlN. This film is self repairing which leads to increased tool service life. This high performance coating is able to withstand much higher temperatures which allows increased speeds and feeds and semi-dry machining operations. TiAlN coating is especially useful when machining cast iron and tough steels.

WWW.BORDO.COM.AU

PAGE 033 21/04/12 6:22 PM

DRILLS STUB METRIC BULK

METRIC STUB DRILLS

DIN1897 135º

118º

140º–145º

PAGE 034

GROUP SURFACE FINISH MATERIAL POINT-TYPE FLUTE TYPE PACKAGING

DIA MM 1.00 1.50 2.00 2.50 3.00 3.26 3.30 3.50 3.70 4.00 4.09 4.20 4.50 4.85 5.00 5.50 6.00 6.50 6.80 7.00 7.50 7.80 8.00 8.50 9.00 9.50 10.00 10.20 10.50 11.00 11.50 12.00 12.50 13.00

DIA GAUGE – – – – – 30 – – – – 20 – – 11 – – – – – – – – – – – – – – – – – – – –

STUB BLACK HSS 135º SPLIT POINT 30º HELIX BULK

FL MM 6 9 12 14 16 24 18 20 20 22 27 22 24 30 26 28 28 31 34 34 34 37 37 37 40 40 43 43 43 47 47 51 51 51

OAL MM 26 32 38 43 46 49 49 52 52 55 54 55 58 57 62 66 66 70 74 74 74 79 79 79 84 84 89 89 89 95 95 102 102 102

PACK QTY 10 10 10 10 10 10 – 10 10 10 10 – 10 10 10 10 10 10 – 10 10 – 5 5 5 5 5 – 5 5 5 5 5 5

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 34

$ EACH 2.66 2.66 2.66 2.66 2.90 – – 3.12 – 3.58 – – 3.12 – 4.12 5.19 5.57 6.26 – 7.49 8.70 – 9.37 10.09 11.52 12.61 14.76 – 15.72 18.22 19.93 22.86 24.91 26.83

PART NUMBER 2021-1.00 2021-1.50 2021-2.00 2021-2.50 2021-3.00 – – 2021-3.50 – 2021-4.00 – – 2021-4.50 – 2021-5.00 2021-5.50 2021-6.00 2021-6.50 – 2021-7.00 2021-7.50 – 2021-8.00 2021-8.50 2021-9.00 2021-9.50 2021-10.00 – 2021-10.50 2021-11.00 2021-11.50 2021-12.00 2021-12.50 2021-13.00

STUB BRIGHT HSS 135º SPLIT POINT 30º HELIX BULK

$ EACH – – – – – 2.90 – – – – 3.58 – – 4.12 – – – – – – – – – – – – – – – – – – – –

PART NUMBER – – – – – 2034-30 – – – – 2034-20 – – 2034-11 – – – – – – – – – – – – – – – – – – – –

CBTP VIOLET / GREY HSS-Co TiAIN COATED MULTI FACETED POINT 35º HELIX SNAP PACK

PACK QTY – – 1 1 1 – 1 1 1 1 – 1 1 – 1 1 1 1 1 1 1 1 1 1 1 1 1 1 – 1 – 1 – 1

$ EACH – – 19.18 19.38 19.90 – 20.61 20.94 21.25 21.97 – 22.29 22.37 – 23.34 24.85 28.68 31.64 32.76 33.16 34.29 34.44 35.16 38.83 40.19 42.02 43.70 45.78 – 49.31 – 53.14 – 61.77

PART NUMBER – – 2051-2.00 2051-2.50 2051-3.00 – 2051-3.30 2051-3.50 2051-3.70 2051-4.00 – 2051-4.20 2051-4.50 – 2051-5.00 2051-5.50 2051-6.00 2051-6.50 2051-6.80 2051-7.00 2051-7.50 2051-7.80 2051-8.00 2051-8.50 2051-9.00 2051-9.50 2051-10.00 2051-10.20 – 2051-11.00 – 2051-12.00 – 2051-13.00

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:22 PM

DRILLS STUB FRACTIONAL BULK

GROUP SURFACE FINISH MATERIAL POINT-TYPE FLUTE TYPE PACKAGING

STUB BLACK HSS 118º SPLIT POINT 30º HELIX BULK

FRACTIONAL STUB DRILLS

DIN1897 DRILL BIT SURFACE TREATMENT BRIGHT FINISH A bright finish tool has no surface treatment and is supplied in the as-ground condition. These tools are suitable for general purpose use, particularly for non-ferrous applications.

DIA INCH 1/16 5/64 3/32 7/64 1/8 9/64 5/32

DIA MM 1.59 1.98 2.38 2.78 3.17 3.57 3.97

FL MM 16 18 19 21 22 24 25

OAL MM 41 43 44 46 48 49 52

PACK QTY 10 10 10 10 10 10 10

$ EACH 2.66 2.66 2.66 2.66 2.66 2.84 3.25

PART NUMBER 2020-1/16 2020-5/64 2020-3/32 2020-7/64 2020-1/8 2020-9/64 2020-5/32

11/64 3/16 13/64 7/32 15/64 1/4 17/64 9/32 19/64 5/16 21/64 11/32 23/64 3/8 25/64 13/32 27/64 7/16 29/64 15/32 31/64 1/2

4.37 4.76 5.16 5.56 5.95 6.35 6.75 7.14 7.54 7.94 8.33 8.73 9.13 9.52 9.92 10.32 10.72 11.11 11.51 11.91 12.30 12.70

27 29 30 32 33 35 37 38 40 41 43 43 44 46 48 49 51 52 54 54 56 57

54 56 57 60 62 64 67 68 70 71 75 75 78 79 83 84 86 87 90 92 94 95

10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5

3.88 4.35 4.78 5.41 5.68 6.16 7.39 7.79 8.73 8.73 10.29 11.04 12.26 13.19 13.41 15.83 17.39 17.39 19.30 21.20 24.99 24.99

2020-11/64 2020-3/16 2020-13/64 2020-7/32 2020-15/64 2020-1/4 2020-17/64 2020-9/32 2020-19/64 2020-5/16 2020-21/64 2020-11/32 2020-23/64 2020-3/8 2020-25/64 2020-13/32 2020-27/64 2020-7/16 2020-29/64 2020-15/32 2020-31/64 2020-1/2

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 35

WWW.BORDO.COM.AU

BLACK FINISH (also called blue finish) A black finish is achieved by steam tempering, a thermal process resulting in a porous tool coating. This surface helps to keep lubricant on the tool, particularly important on the cutting edges, thus reducing friction and cold welding. The result is increased tool life. Black finish tools are generally recommended for ferrous applications where the oxide layer aids chip flow and heat dissipation. VIOLET / GREY (Titanium Aluminium Nitride – TiAlN) A violet/grey finish with a higher hardness than both TiN and TiCN coating utilises aluminium in the coating which imparts greater oxidation stability. This stability is a result of a very thin film (of Aluminium Oxide) which is formed on the surface of the TiAlN. This film is self repairing which leads to increased tool service life. This high performance coating is able to withstand much higher temperatures which allows increased speeds and feeds and semi-dry machining operations. TiAlN coating is especially useful when machining cast iron and tough steels.

PAGE 035 21/04/12 6:23 PM

DRILLS PANEL (RIVET) BULK & CLAM MERCHANDISER

DIA DIA GAUGE MM / INCH – 1/8” 30 3.26mm 20 4.09mm 11 4.85mm

FL MM 14 14 14 17

OAL MM 51 51 55 62

PACK QTY 10 10 10 10

PANEL DRILLS DOUBLE ENDED BRIGHT MERCHANDISER CONTENTS

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 36

$ EACH – 5.46 6.55 7.76

PART NUMBER – 2346-30S 2346-20S 2346-11S

$ MERCHANDISER 542.05 QTY CLAMS 5 15 10 10

SIZE GAUGE 30 30 20 11

PART NUMBER 2345-1/8S 2345-30S 2345-20S 2345-11S

HIGH SPEED STEEL HIGH SPEED STEELTIPPED CARBIDE

6.1-6.4MM #C-E

12.5mm

1/4"

1/2"

1/4" HEX SHANK DRILL ADAPTOR GLASS DRILL SUITS

1/4" HEX SHANK 1/4" HEX SHANK DRILL ADAPTORDRILL ADAPTOR SUITS DRILL SUITS DRILL

1/4"

6.1-6.4MM #C-E

1/4"

6.1-6.4MM #C-E

WOOD PLASTIC

1/4” HEX SHANK HSS

6.5mm

PART NUMBER 2345-1/8 2345-30 2345-20 2345-11

CARBIDE TIPPED CARBIDE TIPPED

PANL BRIGHT HSS 135° SPLIT POINT DOUBLE ENDED CLAM SHELL OF 10 $ EACH 39.21 39.21 48.53 58.35

$ EACH 3.87 3.87 4.81 5.79

GLASS&TILE DRILL1/2"

Diameter 3.26mm Rivet Diameter 1/8" 12.5mm

DOUBLE ENDED 10PK

GLASS

GLASS&TILE DRILL

Diameter 3.26mm Rivet Diameter 1/8"

GLASS

No. 30 1/2"

PART NUMBER – 2346-30 2346-20 2346-11

DOUBLE ENDED 10PK No. 30 GLASS&TILE DRILL

METAL

PANEL DRILL

No. 30

No. 20 DOUBLE ENDED

PANL BRIGHT HSS 135° SPLIT POINT DOUBLE ENDED CLAM SHELL OF 2 $ EACH 8.26 8.26 10.12 12.09

Diameter 3.26mm Rivet Diameter 1/8"

Diameter 4.09mm Rivet Diameter 5/32"

METAL

PANEL DRILL DOUBLE ENDED 10PK

No. 20 Diameter 4.09mm Rivet Diameter 5/32"

METALMETAL

PANEL DRILL DOUBLE ENDED PANEL DRILL

No. 20 No. 20 Diameter 4.09mm Rivet Diamater 5/32"

Diameter 4.09mm Rivet Diameter 5/32"

DOUBLE ENDED

METAL

$ EACH – 2.46 3.01 3.61

SPEED STEEL HIGHHIGH SPEED SPEED STEEL STEEL HIGH SPEEDHIGH STEEL HIGH SPEED STEEL HIGH SPEED STEEL

PANL BRIGHT HSS 135° SPLIT POINT SINGLE ENDED CLAM SHELL OF 2 RIVET DIA. 3mm 1/8” 5/32” 3/16”

PART NUMBER 2343-1/8 2343-30 2343-20 2343-11

PANL BRIGHT HSS 135° SPLIT POINT DOUBLE ENDED BULK (10)

suits POWER-HEX QUICK CHANGE ADAPTOR

GROUP SURFACE FINISH MATERIAL POINT-TYPE END TYPE PACKAGING

METALMETAL

METAL

PANL BRIGHT HSS 135° SPLIT POINT SINGLE ENDED BULK (10)

s &LUTE s s (#3 #OUNTERSINK s #HISEL 0OINT s (ELIX s (33 $RILL "IT

HIGH SPEED STEEL

$ EACH 3.87 3.87 4.81 5.79

PANEL DRILL

PART NUMBER – 2344-30 2344-20 2344-11

METAL

MERCHANDISER TYPE

PAGE 036

$ EACH – 2.46 3.01 3.61

No. 20

PACK QTY 10 10 10 10

Diameter 4.09mm Rivet Diamater 5/32"

OAL MM 51 51 55 62

PANL BLACK HSS 135° SPLIT POINT DOUBLE ENDED BULK (10)

PANEL DRILL PANEL DRILL

FL MM 14 14 14 17

PANEL DRILL

RIVET DIA. 3mm 1/8” 5/32” 3/16”

No. 20

DIA DIA GAUGE MM / INCH – 1/8” 30 3.26mm 20 4.09mm 11 4.85mm

PANL BLACK HSS 135° SPLIT POINT SINGLE ENDED BULK (10)

Diameter 4.09mm Rivet Diamater 5/32"

140º–145º

GROUP SURFACE FINISH MATERIAL POINT-TYPE END TYPE PACKAGING

PANEL DRILL

135º

1/4” HEX SHANK1/4” 1/4” HSSHEX HEXSHANK SHANKHSS HSS

PART NUMBER 2345-1/8T 2345-30T 2345-20T 2345-11T

PART NUMBER 2345-D1 PART NUMBER 2345-30T 2345-30S 2345-20S 2345-11S

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:23 PM

DRILLS CENTRE AND SPOTTING BULK

GROUP SURFACE FINISH MATERIAL POINT TYPE / ANGLE PACKAGING

EQUIV NO. 1 2 3 4 5 6 7 8

CENT BRIGHT HSS 118º / 60º BULK

BODY DIA. INCH 7/8 3/16 1/4 5/16 7/16 1/2 5/8 3/4

PILOT DIA. INCH 3/64 5/64 7/64 1/8 3/16 7/32 1/4 5/16

PL INCH 3/64 5/64 7/64 1/8 3/16 7/32 1/4 5/16

OAL INCH 1-1/4 1-7/8 2 2-1/8 2-3/4 3 3-1/4 3-1/2

GROUP SURFACE FINISH MATERIAL POINT TYPE PACKAGING DIA MM 6.00 8.00 10.00 12.00 16.00 20.00

FL MM 20 25 32 30 35 37

$ EACH 9.80 10.29 11.32 13.66 22.16 41.32 62.72 84.11

PART NUMBER 2560-1 2560-2 2560-3 2560-4 2560-5 2560-6 2560-7 2560-8

SPOT VIOLET / GREY HSS-Co5 TiAIN COATED 90º BULK OAL MM 66 79 90 102 115 130

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 37

PACK QTY 1 1 1 1 1 1 1 1

PACK QTY 1 1 1 1 1 1

$ EACH 10.76 13.33 20.89 23.56 41.99 62.73

PART NUMBER 2570-6 2570-8 2570-10 2570-12 2570-16 2570-20

WWW.BORDO.COM.AU

CENTRE DRILLS

ANSI B94-11 USAGE CENTRE DRILLS Center Drills are used with a lathe to center drill stock for mounting in the lathe. They are designed to drill a small diameter pilot hole followed by a 60° countersink which provides a bearing surface for the 60° point of the lathe center. Center drills are also used extensively with milling machines to accurately start holes. The hole locations can be dialed in using the milling machine’s calibrated handwheels. The hole is then started using the center drill. The large diameter shank on the center drill holds the drill point right on center. Once the hole is started, the center drill is replaced with a drill of the desired diameter and the finished hole is then drilled.

PAGE 037 21/04/12 6:23 PM

DRILLS SPOT WELD METRIC BULK

SPOT WELD DRILLS These drills are designed for removing spot welds and are especially useful for vehicle body repairs. The drills are designed to cut through existing spot welds, releasing damaged panels and enabling replacements to be fitted with minimum fuss. The HSS-Co5 material ensures a long bit life.

TUNGSTEN CARBIDE TiAlN COATED SPOT WELD DRILL These milling drills are designed for removing spot welds with pneumatic tools. They are designed for maximum performance and tool life when used on the hard welds featured in many modern vehicles. The combination of solid carbide and TiAlN coating allows them to cut very hard metal sheets up to 1500N/mm2 tensile strength.

PAGE 038

GROUP SURFACE FINISH MATERIAL PACKAGING DIA MM 6.00 8.00 8.00 8.00

FL MM 28 15 15 37

SWDB BRIGHT HSS-Co5 BULK OAL MM 66 38 45 79

PACK QTY 1 1 1 1

GROUP SURFACE FINISH COATING MATERIAL PACKAGING DIA MM 8.00

FL MM 15

PART NUMBER 2555-6X66 2555-8X38 2555-8X45 2555-8X79

SWDB VIOLET / GREY TiAIN SOLID TUNGSTEN CARBIDE BULK OAL MM 45

PACK QTY 1

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 38

$ EACH 32.20 30.65 33.73 37.10

$ EACH 198.01

PART NUMBER 2556-8X45

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:23 PM

DRILLS GLASS AND TILE HANG SELL & MERCHANDISER

FL MM 3 4 5 6 8 9.5 12.5

OAL MM 63.5 63.5 63.5 63.5 70.0 70.0 76.0

MERCHANDISER TYPE GLASS & TILE DRILL MERCHANDISER CONTENTS

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 39

PACK QTY 1 1 1 1 1 1 1

1/2"

1/4" HEX SHANK DRILL ADAPTOR SUITS DRILL

1/4" 6.1-6.4MM #C-E

CARBIDE TIPPED

$ EACH 11.95 10.18 10.78 12.41 15.03 20.04 30.84

PART NUMBER 2550-1/8 2550-5/32 2550-3/16 2550-1/4 2550-5/16 2550-3/8 2550-1/2

$ MERCHANDISER 693.35

PART NUMBER 2550-D1

QTY CLAMS 5 5 5 10 10 5 5

PART NUMBER 2550-1/8 2550-5/32 2550-3/16 2550-1/4 2550-5/16 2550-3/8 2550-1/2

SIZE INCH 1/8 5/32 3/16 1/4 5/16 3/8 1/2

WWW.BORDO.COM.AU

TUNGSTEN CARBIDE SPEAR POINT DRILLS These drills are designed for drilling glass, tile and other hard, brittle materials. The tungsten carbide spear point is extremely hard and features uniquely sharpened edges for fast penetration with reduced end thrust. These drill bits cut clean round holes without chipping or material breakage. Work best with a lubricant such as water to extend bit life. When drilling multiple holes in ceramic tiles, or when drilling vitrified porcelain, 1/4” HEX SHANK HSS we recommend using either Bordo ceramic tile drills or the Bordo mist drill product range.

DRILL BIT MATERIAL TUNGSTEN CARBIDE (Commonly referred to as Carbide) Is a chemical compound containing equal parts of tungsten and carbon atoms. Carbide is three times stiffer than steel and is much denser than either steel or titanium. Carbide has a very high abrasion resistance and can also withstand higher temperatures than standard HSS. Carbide tools are often used for machining hard materials such as ceramics and stainless steel, as well as in situations where other tools would wear away, such as high volume production runs. Because carbide tools maintain a sharp cutting edge better than other tools, they generally produce a better finish on parts, and their temperature resistance allows faster machining. Whilst tunsgten carbide is extremely hard it is also brittle so it is important to avoid bit “chattering” as this is the most common cause of tool failure.

PAGE 039 21/04/12 6:23 PM

WOOD PLASTIC

s &LUTE s s (#3 #OUNTERSINK s #HISEL 0OINT s (ELIX s (33 $RILL "IT

GLASS&TILE DRILL

DOUBLE ENDED 10PK HIGH SPEED STEEL

12.5mm

No. 30

GLASS

Diameter 3.26mm Rivet Diameter 1/8"

METAL

PANEL DRILL

No. 20 Diameter 4.09mm Rivet Diameter 5/32"

HIGH SPEED STEEL

DIA MM 1/8 5/32 3/16 1/4 5/16 3/8 1/2

DOUBLE ENDED

METAL

PANEL DRILL

Diameter 4.09mm Rivet Diamater 5/32"

PANEL DRILL

METAL

GLBD SHOT PEENED SHANK TUNGSTEN CARBIDE TIPPED SPEAR CLAM SHELL

No. 20

GROUP SURFACE FINISH POINT TYPE POINT FORM PACKAGING

1/4” HE

DRILLS POWER-HEX ADAPTORS CLAM & MERCH

NEW PRODUCT

GROUP SURFACE FINISH SHANK TYPE PACKAGING

PHEX BLACK 1/4" HEX CLAM SHELL

PACK QTY

$ PACK

1/16" 3/32" 1/8" 5/32" 3/16" 7/32" 1/4" 1/8" BULK PACK 1/8"

52-54 40-44 30-32 20-26 11-15 2-4 Letter C - E

1.4-1.6 2.1-2.4 2.9-3.2 3.7-4.0 4.5-4.8 5.3-5.6 6.1-6.4

1 1 1 1 1 1 1

7.39 7.39 7.39 7.39 7.39 7.39 7.39

30-32

2.9-3.2

59.90

2201-1/8B

ADAPTOR QTY

$ SET

PART NUMBER

33.44

2201-S1

$ MERCHANDISER 103.46

PART NUMBER 2201-D1

POWER-HEX DRILL ADAPTORS – CLAM SHELL 1/16", 3/32", 1/8", 5/32", 3/16", 7/32" & 1/4"

MERCHANDISER TYPE POWER-HEX DRILL ADAPTORS MERCHANDISER CONTENTS

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 40

PART NUMBER 1/4” HEX SHANK HSS 2201-1/16 2201-3/32 2201-1/8 2201-5/32 2201-3/16 2201-7/32 2201-1/4

QTY

DESCRIPTION

PART NUMBER

2 2 2 2 2 2 2

POWER-HEX ADAPTOR - 1/16 POWER-HEX ADAPTOR - 3/32 POWER-HEX ADAPTOR - 1/8 POWER-HEX ADAPTOR - 5/32 POWER-HEX ADAPTOR - 3/16 POWER-HEX ADAPTOR - 7/32 POWER-HEX ADAPTOR - 1/4

2201-1/16 2201-3/32 2201-1/8 2201-5/32 2201-3/16 2201-7/32 2201-1/4

1/4” HEX SHANK HSS

DUAL BLADE

PREMIUM HSS-Co5 COBALT DRILL SCREW GAUGE PILOT HOLES

6G 8G

HARDWOOD

TCT COUNTERSINK

1.98mm Equivalent

TUNGSTEN CARBIDE

USE WITH BORDO TCT COUNTERSINKS Countersinking Depth

2mm 4mm 6mm

4MM

2MM

SOFTWOOD

DEPTH STOPS

6MM

SUITS DRILL MM

5/64"

s )DEAL FOR COUNTERSINKING FIBRE CEMENT SHEET

SUITS DRILL # / LETTER

for use in Cement Sheet Blue Board Hardwood Softwood MDF Laminates and other hard or abrasive materials

TCT COUNTERSINK

CARBIDE TIPPED

6.5mm

PLASTIC

#C-E

suits POWER-HEX QUICK CHANGE ADAPTOR

12.5mm

GLASS&TILE DRILL

WOOD

1/4" 6.1-6.4MM

SUITS DRILL INCH

SET DESCRIPTION SET CONTENTS

PAGE 040

1/2"

No. 30 DOUBLE ENDED 10PK HIGH SPEED STEEL

1/4" HEX SHANK DRILL ADAPTOR SUITS DRILL

s &LUTE s s (#3 #OUNTERSINK s #HISEL 0OINT s (ELIX s (33 $RILL "IT

HIGH SPEED STEEL

GLASS

Diameter 3.26mm Rivet Diameter 1/8"

METAL

PANEL DRILL

No. 20 Diameter 4.09mm Rivet Diameter 5/32"

DOUBLE ENDED

Diameter 4.09mm Rivet Diamater 5/32"

METAL

PANEL DRILL

Guidelines for Use Select the correct size Power-Hex Drill Adaptor to suit the drill you wish to convert. Loosen the collet on the adaptor and fully insert the drill into the adaptor. Tighten the adaptor with a spanner or adjustable wrench to ensure that there is no slip. To remove and replace the drill simply reverse the procedure.

METAL

PANEL DRILL

Bordo’s range of Power-Hex Drill Adaptors convert standard round shank jobber drills to 1/4” hex shank. The resulting hex shank drill is suitable for use in quick change adaptors, bit holders and standard drill chucks.

No. 20

POWER-HEX DRILL ADAPTORS

TCT COUNTERSINK DEPTH STOPS

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:23 PM

DRILLS POWER-HEX METRIC CLAM & MERCH

1/4” HEX SHANK HSS

DIA MM 2.00 2.50 3.00 3.50 4.00 4.50 5.00 5.50 6.00 6.50

GAUGE SCREW 2G 4G 6G 8G 10G 12G 12G – – –

POWER-HEX DRILLS QTY CLAMS 10 10 10 10 10 10 10 10 10 10

SIZE INCH DRILLS 2.00 2.50 3.00 3.50 4.00 4.50 5.00 5.50 6.00 6.50

COBALT DRILL SCREW GAUGE PILOT HOLES HARDWOOD

QTY CLAMS

TUNGSTEN CARBIDE

2200-2.00 2200-2.50 2200-3.00 2200-3.50 2200-4.00 2200-4.50 2200-5.00 2200-5.50 2200-6.00 2200-6.50

PART NUMBER

DRILLS WITH COUNTERSINK 6 2.00 2200-2.00CS 6 2.50 2200-2.50CS 6 3.00 2200-3.00CS 6 3.50 2200-3.50CS 6 4.00 2200-4.00CS 6 4.50 2200-4.50CS 6 5.00 2200-5.00CS 6 5.50 2200-5.50CS 6 6.00 2200-6.00CS 6 6.50 2200-6.50CS

WWW.BORDO.COM.AU

PAGE 041 21/04/12 6:24 PM

DEPTH STOPS

USE WITH BORDO TCT COUNTERSINKS

Countersinking Depth

2mm 4mm 6mm

4MM

2MM

SOFTWOOD

PART NUMBER 2200-2.00 2200-2.50 2200-3.00 2200-3.50 2200-4.00 2200-4.50 2200-5.00 2200-5.50 2200-6.00 2200-6.50

SIZE INCH

TCT COUNTERSINK

DUAL BLADE

PART NUMBER 2200-D1

PART NUMBER

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 41

$ EACH 3.06 2.78 2.91 3.12 3.39 3.39 3.80 3.93 4.14 4.48

$ MERCHANDISER 729.08

MERCHANDISER TYPE

MERCHANDISER CONTENTS

PACK QTY 1 1 1 1 1 1 1 1 1 1

OAL MM 69 77 81 90 95 100 106 113 113 121

1/4” HEX SHANK HSS

1.98mm Equivalent

6MM

CARBIDE TIPPED

for use in Cement Sheet Blue Board Hardwood Softwood MDF Laminates and other hard or abrasive materials

s )DEAL FOR COUNTERSINKING FIBRE CEMENT SHEET

PLASTIC

Power-Hex drill bits feature a 1/4” hex shank which makes them ideal for use with quick change adaptors and bit holders. Changing your drill bit is now as easy as swapping between any other 1/4” hex shank accessory. Power-Hex drills are ideal for use5/64" with TUNGSTEN CARBIDE Bordo’s extensive PREMIUM range of quick HSS-Co5 change adaptors, bit 6G holders and quick 8G change extensions.

TCT COUNTERSINK

6.1-6.4MM #C-E

6.5mm

1/2"

WOOD

1/4"

suits POWER-HEX QUICK CHANGE ADAPTOR

HIGH SPEED STEEL

1/4" HEX SHANK DRILL ADAPTOR SUITS DRILL

12.5mm

Diameter 3.26mm Rivet Diameter 1/8"

DOUBLE ENDED 10PK

PANEL DRILL

HIGH SPEED STEEL

GLASS

GLASS&TILE DRILL

No. 30

No. 20 Diameter 4.09mm Rivet Diameter 5/32"

DOUBLE ENDED

METAL

POWER-HEX DRILLS

PHEX BRIGHT HSS 118˚ STD CHISEL 30˚ HELIX 1/4" HEX CLAM SHELL

s &LUTE s s (#3 #OUNTERSINK s #HISEL 0OINT s (ELIX s (33 $RILL "IT

HIGH SPEED STEEL

METAL

PANEL DRILL

Diameter 4.09mm Rivet Diamater 5/32"

PANEL DRILL

METAL

No. 20

GROUP SURFACE FINISH MATERIAL POINT TYPE FLUTE TYPE SHANK TYPE PACKAGING

TCT COUNTERSINK DEPTH STOPS

DRILLS POWER-HEX METRIC CLAM & SET

GROUP SURFACE FINISH MATERIAL POINT TYPE FLUTE TYPE COUNTERSINK TYPE SHANK TYPE PACKAGING

118º

PHEX BRIGHT HSS 118˚ STD CHISEL 30˚ HELIX 4 FLUTE 90˚ HSS 1/4" HEX CLAM SHELL

POWER-HEX DRILLS Power-Hex drill bits feature a 1/4” hex shank which makes them ideal for use with quick change adaptors and bit holders. Changing your drill bit is now as easy as swapping between any other 1/4” hex shank accessory. Power-Hex drills are ideal for use with Bordo’s extensive range of quick change adaptors, bit holders and quick change extensions.

1/4” HEX SHANK HSS

SIZE 2.00 2.50 3.00 3.50 4.00 4.50 5.00 5.50 6.00 6.50

GAUGE SCREW 2G 4G 6G 8G 10G 12G 12G – – –

DIA OUTER (MM) 13 13 13 13 13 14 16 16 16 16

OAL MM 69 77 81 90 95 100 106 113 113 121

PACK QTY 1 1 1 1 1 1 1 1 1 1

POWER-HEX DRILL AND BIT SET

The depth of the drilled hole can be adjusted by loosening the grub screw on the countersink and re-positioning it at the desired position on the drill. Ensure you tighten the grub screw to secure it in place. Power-Hex drills and countersinks are designed for use in timber and plastics – they are NOT designed for use in metal.

QTY CLAMS

PREMIUM HSS-Co5

COBALT DRILL SCREW GAUGE PILOT HOLES

6G 8G

HARDWOOD

TCT COUNTERSINK

DUAL BLADE

TUNGSTEN CARBIDE

USE WITH BORDO TCT COUNTERSINKS Countersinking Depth

4MM

2MM

2mm 4mm 6mm

6MM

s )DEAL FOR COUNTERSINKING FIBRE CEMENT SHEET

SOFTWOOD

DEPTH STOPS

TCT COUNTERSINK DEPTH STOPS

PART NUMBER 2200-2.00CS 2200-2.50CS 2200-3.00CS 2200-3.50CS 2200-4.00CS 2200-4.50CS 2200-5.00CS 2200-5.50CS 2200-6.00CS 2200-6.50CS

SIZE PART MM NUMBER POWER-HEX DRILLS 1 2.00 2200-2.00 1 2.50 2200-2.50 1 3.00 2200-3.00 1 3.50 2200-3.50 1 4.00 2200-4.00 1 4.50 2200-4.50 1 5.00 2200-5.00 POWER-HEX DRILLS WITH C’SINK 1 2.00 2200-2.00CS 1 2.50 2200-2.50CS 1 3.00 2200-3.00CS 1 3.50 2200-3.50CS 1 4.00 2200-4.00CS 1 4.50 2200-4.50CS 1 5.00 2200-5.00CS

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 42

$ EACH 5.50 5.02 5.29 5.62 6.11 6.11 6.85 7.13 7.47 8.08

1.98mm Equivalent

TUNGSTEN CARBIDE

$ SET 94.08

SET TYPE

SET CONTENTS

1/4” HEX SHANK HSS

5/64"

for use in Cement Sheet Blue Board Hardwood Softwood MDF Laminates and other hard or abrasive materials

TCT COUNTERSINK

PLASTIC

#C-E

6.5mm

WOOD

1/4" 6.1-6.4MM

s &LUTE s s (#3 #OUNTERSINK s #HISEL 0OINT s (ELIX s (33 $RILL "IT

1/2"

1/4" HEX SHANK DRILL ADAPTOR SUITS DRILL

CARBIDE TIPPED

GUIDELINES FOR USE

PAGE 042

12.5mm

GLASS&TILE DRILL

No. 30 Diameter 3.26mm Rivet Diameter 1/8"

HIGH SPEED STEEL

GLASS

suits POWER-HEX QUICK CHANGE ADAPTOR

BRIGHT FINISH A bright finish tool has no surface treatment and is supplied in the as-ground condition. These tools are suitable for general purpose use, particularly for nonferrous applications.

DOUBLE ENDED 10PK

DRILL BIT HIGH SPEED STEEL SURFACE TREATMENT

HIGH SPEED STEEL

METAL

PANEL DRILL

No. 20 Diameter 4.09mm Rivet Diameter 5/32"

PANEL DRILL

DOUBLE ENDED

METAL

Standard Point (chisel point) Standard point is suitable for general purpose drilling. Diameter 4.09mm Rivet Diamater 5/32"

PANEL DRILL

METAL

No. 20

125º–135º

PART NUMBER 2200-S1 PART NUMBER POWER-BITS 50MM 1 5400-PH1x50 1 5400-PH2x50 1 5400-PH3x50 1 5400-PH2Gx50 1 5400-SL5x50 1 5400-SL6x50 1 5400-SL8x50 1 5400-HX5x50 1 5400-PZ1x50 1 5400-PZ2x50 1 5400-PZ3x50 1 5400-SR1x50 1 5400-SR2x50 ADAPTOR 1/4" Quick Change Adaptor

QTY

STYLE

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:24 PM

DRILLS COUNTERSINK METRIC CLAM & MERCH

GROUP DRILL TYPE POINT TYPE FLUTE TYPE COUNTERSINK MATERIAL COUNTERSINK TYPE SHANK TYPE PACKAGING

PHDL HSS-Co5 135˚ SPLIT POINT 30˚ HELIX TUNGSTEN CARBIDE 90º DUAL BLADE 1/4" HEX CLAM SHELL

NEW PRODUCT

CARBIDE TIPPED

6mm 1/4” HEX SHANK HSS

SIZE INCH 3/32 5/64 1/8 7/64 9/64 5/32* 3/16*

PILOT PILOT HARDWOOD SOFTWOOD 6G 8G 8G 10G 10G 14G 12G – 14G 16G 16G – 18G 24G

SHANK HOLE 1G 2G 4G 5G 6G 7G 9G

COBALT DRILL SCREW GAUGE PILOT HOLES

6G 8G

HARDWOOD

TCT COUNTERSINK

DUAL BLADE

PREMIUM HSS-Co5

USE WITH BORDO TCT COUNTERSINKS Countersinking Depth

2mm 4mm 6mm

2MM

SOFTWOOD

TUNGSTEN CARBIDE

1/4” HEX SHANK HSS

PACK QTY 1 1 1 1 1 1 1

1.98mm Equivalent

TUNGSTEN CARBIDE

DEPTH STOPS

4MM

PLASTIC

#C-E

5/64"

s )DEAL FOR COUNTERSINKING FIBRE CEMENT SHEET

1/4" 6.1-6.4MM

for use in Cement Sheet Blue Board Hardwood Softwood MDF Laminates and other hard or abrasive materials

TCT COUNTERSINK

WOOD

6MM

6.5mm

1/2" 12.5mm

1/4" HEX SHANK DRILL ADAPTOR SUITS DRILL

suits POWER-HEX QUICK CHANGE ADAPTOR

HIGH SPEED STEEL

GLASS

GLASS&TILE DRILL

No. 30 Diameter 3.26mm Rivet Diameter 1/8"

DOUBLE ENDED 10PK

PANEL DRILL

No. 20 Diameter 4.09mm Rivet Diameter 5/32"

DOUBLE ENDED

HIGH SPEED STEEL

METAL

s &LUTE s s (#3 #OUNTERSINK s #HISEL 0OINT s (ELIX s (33 $RILL "IT

HIGH SPEED STEEL

METAL

PANEL DRILL

4mm

PANEL DRILL

METAL

Diameter 4.09mm Rivet Diamater 5/32"

2mm

No. 20

COUNTERSINK MATERIAL

TCT COUNTERSINK DEPTH STOPS

$ EACH 51.61 51.61 51.61 51.61 51.61 58.28 58.28

PART NUMBER 2202-3/32 2202-5/64 2202-1/8 2202-7/64 2202-9/64 2202-5/32 2202-3/16

$ CLAM 14.69

PART NUMBER 2202-3ST

$ MERCHANDISER 1,062.56

PART NUMBER 2202-D1

* Depth stops not suitable for use with these sizes

CLAM CONTENTS DEPTH STOPS TO SUIT TCT COUNTERSINKS 2MM, 4MM AND 6MM

MERCHANDISER TYPE TCT COUNTERSINK MERCHANDISER CONTENTS

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 43

QTY 3

QTY EACH

SIZE MM/INCH

PART NUMBER

2 2 2 2 2 2 2 2 2 2 2 2 2 2 10

3/32 5/64 7/64 9/64 1/8 3/16 5/32 3/32 5/64 7/64 9/64 1/8 3/16 5/32 –

2202-3/32 2202-5/64 2202-7/64 2202-9/64 2202-1/8 2202-3/16 2202-5/32 2010-3/32S 2010-5/64S 2010-7/64S 2010-9/64S 2010-1/8S 2010-3/16S 2010-5/32S 2202-3ST

WWW.BORDO.COM.AU

TUNGSTEN CARBIDE (Commonly referred to as Carbide) Is a chemical compound containing equal parts of tungsten and carbon atoms. Carbide is three times stiffer than steel and is much denser than either steel or titanium. Carbide has a very high abrasion resistance and can also withstand higher temperatures than standard HSS. Carbide tools are often used for machining hard materials such as ceramics and stainless steel, as well as in situations where other tools would wear away, such as high volume production runs. Because carbide tools maintain a sharp cutting edge better than other tools, they generally produce a better finish on parts, and their temperature resistance allows faster machining. Whilst tunsgten carbide is extremely hard it is also brittle so it is important to avoid bit “chattering” as this is the most common cause of tool failure.

Shank Holes

SHANK HOLES Using a shank Usinghole a shank allowshole the screw thread allows the toscrew to base threadonly onlythethe base material and material and tighten tighten gaps gapsbetween betweenthem them.

PAGE 043 21/04/12 6:24 PM

DRILLS MORSE TAPER METRIC BULK

MORSE TAPER DRILLS

DIN345 118º

125º–135º

Notched Point A variation on standard chisel point providing faster starting and reduced drill wander. Suitable for general purpose drilling.

GROUP SURFACE FINISH MATERIAL POINT-TYPE FLUTE TYPE PACKAGING DIA MM MTS 5.00 6.00 7.00 8.00 9.00 10.00 10.25* 10.50 11.00 11.50 12.00 12.50 13.00 13.50 14.00 MTS 14.50 15.00 15.50 16.00 16.50 17.00 17.50 18.00 18.50 19.00 19.50 20.00 20.50 20.75* 21.00 21.50 22.00 22.50 22.75* 23.00 MTS 23.50 24.00 24.25* 24.50 25.00 25.25* 25.50 26.00 26.25* 26.50 27.00 27.25* 27.50 28.00 28.50 28.75* 29.00 29.25* 29.50 29.75* 30.00 30.50 30.75*

MTS NO. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3

MTSD BLACK HSS 118º NOTCHED† 30º HELIX SINGLE FL MM

OAL MM

PACK QTY

$ EACH

PART NUMBER

52 57 69 75 81 87 87 87 94 94 101 101 101 108 108

133 138 150 156 162 168 168 168 175 175 182 182 182 189 189

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

29.52 32.51 34.96 37.04 47.09 35.20 48.28 36.47 41.14 43.56 46.05 48.03 49.77 50.10 50.88

2608-5.00 2608-6.00 2608-7.00 2608-8.00 2608-9.00 2608-10.00 2608-10.25 2608-10.50 2608-11.00 2608-11.50 2608-12.00 2608-12.50 2608-13.00 2608-13.50 2608-14.00

114 114 120 120 125 125 130 130 135 135 140 140 145 145 145 150 150 155 155 155

212 212 218 218 223 223 228 228 233 233 238 238 243 243 243 248 248 253 253 253

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

58.81 59.77 62.71 66.68 72.19 79.43 82.79 88.40 94.79 98.84 112.13 112.13 124.36 128.29 124.36 128.34 136.35 140.76 155.04 147.05

2608-14.50 2608-15.00 2608-15.50 2608-16.00 2608-16.50 2608-17.00 2608-17.50 2608-18.00 2608-18.50 2608-19.00 2608-19.50 2608-20.00 2608-20.50 2608-20.75 2608-21.00 2608-21.50 2608-22.00 2608-22.50 2608-22.75 2608-23.00

155 160 160 160 160 165 165 165 165 165 170 170 170 170 175 175 175 175 175 175 175 180 180

276 281 281 281 281 286 286 286 286 286 291 291 291 291 296 296 296 296 296 296 296 301 301

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

152.06 158.69 173.15 163.88 168.79 178.53 186.47 195.61 197.87 198.38 196.99 205.47 210.79 211.39 236.57 244.33 240.89 250.71 241.75 254.71 242.44 250.02 262.62

2608-23.50 2608-24.00 2608-24.25 2608-24.50 2608-25.00 2608-25.25 2608-25.50 2608-26.00 2608-26.25 2608-26.50 2608-27.00 2608-27.25 2608-27.50 2608-28.00 2608-28.50 2608-28.75 2608-29.00 2608-29.25 2608-29.50 2608-29.75 2608-30.00 2608-30.50 2608-30.75

GROUP SURFACE FINISH MATERIAL POINT-TYPE FLUTE TYPE PACKAGING DIA MM MTS 31.00 31.25* 31.50 MTS 32.00 32.50 33.00 33.50 34.00 34.50 35.00 35.50 36.00 37.00 38.00 39.00 40.00 41.00 42.00 43.00 44.00 45.00 46.00 46.50* 47.00 47.50* 48.00 49.00 50.00 MTS 51.00 52.00* 53.00* 54.00* 55.00 56.00* 57.00* 58.00* 59.00* 60.00 61.00* 62.00 63.00* 64.00* 65.00 70.00 75.00

MTS NO. 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

MTSD BLACK HSS 118º NOTCHED† 30º HELIX SINGLE FL MM

OAL MM

PACK QTY

$ EACH

PART NUMBER

180 180 180

301 301 301

1 1 1

254.86 265.20 275.99

2608-31.00 2608-31.25 2608-31.50

185 185 185 185 190 190 190 190 195 195 200 200 200 205 205 210 210 210 215 215 215 215 220 220 220

334 334 334 334 339 339 339 339 344 344 349 349 349 354 354 359 359 359 364 364 364 364 369 369 369

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

288.75 295.74 301.60 321.62 324.38 348.06 354.64 361.11 370.00 398.71 407.33 440.54 455.87 470.48 497.39 552.92 572.83 592.87 640.37 651.03 660.26 692.32 744.99 797.78 855.78

2608-32.00 2608-32.50 2608-33.00 2608-33.50 2608-34.00 2608-34.50 2608-35.00 2608-35.50 2608-36.00 2608-37.00 2608-38.00 2608-39.00 2608-40.00 2608-41.00 2608-42.00 2608-43.00 2608-44.00 2608-45.00 2608-46.00 2608-46.50 2608-47.00 2608-47.50 2608-48.00 2608-49.00 2608-50.00

225 225 225 230 230 230 235 235 235 235 240 240 240 245 245 250 255

412 412 412 417 417 417 422 422 422 422 427 427 427 432 432 437 442

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

916.05 1,001.81 1,037.17 1,086.97 1,050.66 1,152.27 1,197.50 1,272.45 1,301.20 1,284.46 1,416.34 1,428.79 1,454.70 1,553.14 1,567.57 1,798.23 2,113.69

2608-51.00 2608-52.00 2608-53.00 2608-54.00 2608-55.00 2608-56.00 2608-57.00 2608-58.00 2608-59.00 2608-60.00 2608-61.00 2608-62.00 2608-63.00 2608-64.00 2608-65.00 2608-70.00 2608-75.00

MTS Sleeves page

† Some older stock may be 118º standard chisel point. * Discontinued - available until current stocks are depleted.

PAGE 044

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 44

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:24 PM

DRILLS MORSE TAPER FRACTIONAL BULK

GROUP SURFACE FINISH MATERIAL POINT-TYPE FLUTE TYPE PACKAGING DIA INCH MTS 1/8 3/16 13/64 7/32 1/4 9/32 5/16 11/32 23/64* 3/8 25/64* 13/32 7/16 15/32 1/2 17/32 MTS 9/16 19/32 5/8 21/32 11/16 23/32 3/4 25/32 13/16 27/32 7/8 29/32 MTS 15/16 31/32 1 1-1/16 1-1/8 1-3/16 1-1/4 MTS 1-5/16 1-3/8 1-7/16 1-1/2 1-9/16 1-5/8 1-11/16 1-3/4 1-13/16 1-7/8 1-15/16 2 MTS 2-1/8* 2-1/4* 2-3/8* 2-5/8* 2-3/4* 2-7/8* 3*

MTS NO. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5

MTSD BLACK HSS 118º NOTCHED† 30º HELIX SINGLE FL MM

OAL MM

PACK QTY

$ EACH

PART NUMBER

37 52 52 57 64 69 75 81 81 87 87 87 94 101 101 108

117 133 133 138 144 150 156 162 162 168 168 168 175 182 182 189

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

30.02 32.51 28.93 32.26 28.75 33.38 35.98 46.26 46.43 49.54 50.44 35.97 41.49 44.14 48.21 49.40

2607-1/8 2607-3/16 2607-13/64 2607-7/32 2607-1/4 2607-9/32 2607-5/16 2607-11/32 2607-23/64 2607-3/8 2607-25/64 2607-13/32 2607-7/16 2607-15/32 2607-1/2 2607-17/32

114 121 121 124 130 133 140 140 146 149 149 156

213 219 219 222 229 232 238 238 244 248 248 254

1 1 1 1 1 1 1 1 1 1 1 1

53.66 59.61 61.82 76.70 80.69 89.37 102.04 110.54 122.62 124.84 137.58 144.98

2607-9/16 2607-19/32 2607-5/8 2607-21/32 2607-11/16 2607-23/32 2607-3/4 2607-25/32 2607-13/16 2607-27/32 2607-7/8 2607-29/32

159 159 165 168 175 181 184

279 279 286 289 295 302 305

1 1 1 1 1 1 1

156.46 160.45 183.84 194.21 237.50 239.02 280.44

2607-15/16 2607-31/32 2607-1 2607-1.1/16 2607-1.1/8 2607-1.3/16 2607-1.1/4

184 191 194 200 200 206 210 210 216 219 219 225

333 340 343 349 349 356 359 359 365 368 368 375

1 1 1 1 1 1 1 1 1 1 1 1

317.08 349.65 375.84 401.61 449.45 473.29 542.42 576.33 631.37 682.57 786.56 903.15

2607-1.5/16 2607-1.3/8 2607-1.7/16 2607-1.1/2 2607-1.9/16 2607-1.5/8 2607-1.11/16 2607-1.3/4 2607-1.13/16 2607-1.7/8 2607-1.15/16 2607-2

229 235 235 244 250 255 260

416 422 422 432 437 442 447

1 1 1 1 1 1 1

1,004.31 1,108.23 1,319.07 1,681.61 1,772.90 1,914.49 2,198.47

2607-2.1/8 2607-2.1/4 2607-2.3/8 2607-2.5/8 2607-2.3/4 2607-2.7/8 2607-3

MORSE TAPER DRILLS

DIN345 118º

125º–135º

Notched Point A variation on standard chisel point providing faster starting and reduced drill wander. Suitable for general purpose drilling.

† Some older stock may be 118º standard chisel point. * Discontinued - available until current stocks are depleted.

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 45

WWW.BORDO.COM.AU

PAGE 045 21/04/12 6:24 PM

DRILLS MTS SLEEVES BULK

MTS SLEEVES Bordo’s range of hardened steel Morse Taper Shank Sleeves are precision ground inside and out and are also fully through hardened. These “adapter sleeves” convert the smaller MT male taper of a tool to a larger MT shank to enable usage in a drill press or lathe fitted with a larger MTS chuck.

GROUP SURFACE FINISH MATERIAL PACKAGING PACKAGING

MSLV BRIGHT HARDENED STEEL SINGLE SINGLE

A B

MTS INSIDE

MTS OUTSIDE

PACK QTY

$ EACH

PART NUMBER

1 1 2 2 2 3 3 4 5

2 3 3 4 5 4 5 5 6

1 1 1 1 1 1 1 1 1

29.45 40.14 38.63 48.42 73.73 48.42 73.73 74.35 191.45

2625-1X2 2625-1X3 2625-2X3 2625-2X4 2625-2X5 2625-3X4 2625-3X5 2625-4X5 2625-5X6

IDENTIFYING MORSE TAPER SHANK SIZES MTS # MTS 1 MTS 2 MTS 3 MTS 4 MTS 5 MTS 6

PAGE 046

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 46

A 0.4750" 12.065MM 0.7000" 17.780MM 0.9380" 23.825MM 1.2310" 31.267MM 1.7480" 44.399MM 2.4940" 63.348MM

B 0.3690" 9.373MM 0.5720" 14.529MM 0.7780" 19.761MM 1.0200" 25.908MM 1.4750" 37.465MM 2.1160" 53.746MM

C 2.13" 54.10MM 2.56" 65.02MM 3.19" 81.06MM 4.06" 103.12MM 5.19" 131.83MM 7.25" 184.15mm

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:24 PM

DRILLS UNIVERSAL METRIC CLAM, SET, MERCH

FL MM 40.00 40.00 50.00 50.00 60.00 60.00 60.00 80.00 80.00 80.00 90.00

OAL MM 70 75 85 85 100 100 100 120 120 120 150

SHANK MM 2.8 3.6 4.6 5.1 5.6 6.1 6.6 7.1 8.1 8.6 10

SET DESCRIPTION UNIVERSAL DRILL SET 4, 5, 6, 8 and 10mm

MERCHANDISER TYPE UNIVERSAL DRILLS MERCHANDISER CONTENTS

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 47

TITANIUM CARBIDE

TUNGSTEN CARBIDE

PACK QTY 1 1 1 1 1 1 1 1 1 1 1

$ EACH 14.33 14.33 14.75 15.19 15.35 16.94 17.70 17.83 22.26 22.79 30.25

PART NUMBER 2700-3.00 2700-4.00 2700-5.00 2700-5.50 2700-6.00 2700-6.50 2700-7.00 2700-8.00 2700-9.00 2700-10.00 2700-12.00

PIECES QTY 5

$ SET 85.04

PART NUMBER 2700-S1

FEATURES s $). )3/ s 3PECIAL CUTTING EDGE geometry s $IAMOND GROUND carbide tip s 5NIVERSAL DRILL BIT with asymmetric spiral shape s #UTTING DRILLING spiral for optimum spoil removal s 3TRAIGHT m UTE ENTRY s (IGH TEMPERATURE brazing at 1,120ยบC s 3PECIALLY GROUND cutting helix with micro surface hardness s 'ROUND SURFACE 22mm

10.0mm Multiโ Facet Tungsten Carbide Tip

s %XTREME 0ERFORMANCE IN HARD CERAMIC MATERIALS

for use in Natural Stone Artificial Stone Ceramics and Tiles

CERAMIC TILE DRILL

12.0mm 15/32โ s 'ROUND -ICRO (ARDENED 3URFACE s /PTIMISED #UTTING %DGE 'EOMETRY

UNIVERSAL DRILL

HIGH SPEED STEEL

Diamond Ground Titanium Carbide Tip

12.0mm

WOOD DRILL BRAD POINT

for use in Masonry Natural Stone Artificial Stone Ceramics Steel / Metal Wood PVC / Acrylic Glass & Tiles

s "RAD POINT PROVIDES ACCURATE STARTING AND WIDE FLUTES ENSURE FAST CHIP EXTRACTION s 0RECISION GROUND FOR EXACT HOLE SIZE IN WOODWORKING APPLICATIONS s #UTTING SPURS REDUCE SPLINTERING TO ENSURE A SMOOTH CLEAN HOLE

6.5mm 800 RPM GREEN PLUG

MASONRY DRILL

WOOD

CARBIDE TIPPED

DIA MM 3.00 4.00 5.00 5.50 6.00 6.50 7.00 8.00 9.00 10.00 12.00

UNIVERSAL DRILLS

MPDB BRIGHT / ORANGE STEEL TITANIUM CARBIDE 30ยบ HELIX CLAM SELL

1/4"

GROUP SURFACE FINISH MATERIAL POINT-TYPE FLUTE TYPE PACKAGING

FOR USE IN Masonry Natural Stone Artificial Stone Ceramics Steel / Metal Wood / PVC / Acrylic Glass Tiles, Hard burnt brick Not for hammer action

NEW PACKAGING

$ MERCHANDISER 358.92 QTY EACH 2 2 2 2 2 2 2 2 2 2

SIZE MM/INCH 3.00 4.00 5.00 5.50 6.00 6.50 7.00 8.00 10.00 12.00

PART NUMBER 2700-D1 PART NUMBER 2700-3.00 2700-4.00 2700-5.00 2700-5.50 2700-6.00 2700-6.50 2700-7.00 2700-8.00 2700-10.00 2700-12.00

WWW.BORDO.COM.AU

PAGE 047 21/04/12 6:24 PM

DRILLS CERAMIC TILE METRIC CLAM, SET & MERCH

PAGE 048

HIGH SPEED STEEL

22mm

TUNGSTEN CARBIDE

TITANIUM CARBIDE

DIA MM

FL MM

OAL MM

SHANK MM

PACK QTY

$ EACH

PART NUMBER

3.00 4.00 5.00 5.50 6.00 6.50 8.00 10.00

42 50 50 65 65 65 75 90

85 85 85 100 100 100 125 150

3.0 4.0 5.0 5.5 6.0 6.5 8.0 10.0

1 1 1 1 1 1 1 1

25.15 24.86 26.47 26.47 27.77 27.77 34.88 42.61

2710-3.00 2710-4.00 2710-5.00 2710-5.50 2710-6.00 2710-6.50 2710-8.00 2710-10.00

PIECES QTY 5

$ SET 137.82

PART NUMBER 2710-S1

$ MERCHANDISER 707.94

PART NUMBER 2710-D1

SET CONTENTS CERAMIC TILE DRILL SET 5, 5.5, 6, 6.5 and 8mm

MERCHANDISER TYPE CERAMIC TILE DRILLS MERCHANDISER CONTENTS

QTY EACH 3 3 3 3 3 3 3 3

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 48

are also suitable for use in brick, concrete and other masonry materials. Ensure the drill is in rotary only - DO NOT use hammer action.

10.0mm Multi–Facet Tungsten Carbide Tip

s 'ROUND -ICRO (ARDENED 3URFACE s /PTIMISED #UTTING %DGE 'EOMETRY

Diamond Ground Titanium Carbide Tip

CERAMIC TILE DRILL

15/32”

for use in Natural Stone Artificial Stone Ceramics and Tiles

CERAMIC TILE DRILLS

s %XTREME 0ERFORMANCE IN HARD CERAMIC MATERIALS

12.0mm

for use in Masonry Natural Stone Artificial Stone Ceramics Steel / Metal Wood PVC / Acrylic Glass & Tiles

UNIVERSAL DRILL

WOOD DRILL BRAD POINT

800 RPM GREEN PLUG

CARBIDE TIPPED

12.0mm

6.5mm

WOOD

CTDB BRIGHT STEEL TUNGSTEN CARBIDE 30º HELIX CLAM SHELL

1/4"

GROUP SURFACE FINISH MATERIAL POINT-TYPE FLUTE TYPE PACKAGING

MASONRY DRILL

EXTREME PERFORMANCE MULTI-FACET TUNGSTEN CARBIDE TIP These Rotary Only ceramic tile drills provide outstanding performance and extended tool life in hard ceramic materials. They feature a unique cutting edge geometry in conjunction with high temperature brazing to ensure reliable and accurate drilling in multiple hole applications. Use of water cooling will extend bit life. s !LTHOUGH THESE drill bits are not recommended for drilling vitrified porcelain, their superior multi-facet tungsten carbide tip enables them to drill most materials of this type, albeit with a reduced tool life. s 4HESE CERAMIC tile drills can also be used to successfully drill in brick, concrete and other masonry materials.

SIZE MM/INCH 3.00 4.00 5.00 5.50 6.00 6.50 8.00 10.00

PART NUMBER 2710-3.00 2710-4.00 2710-5.00 2710-5.50 2710-6.00 2710-6.50 2710-8.00 2710-10.00

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:24 PM

DRILLS DIAMOND MIST METRIC CLAM SHELL

GROUP TYPE CUTTERS CUTTING SURFACE CUTTING METHOD PACKAGING

DIMD DIAMOND MIST DRILL REPLACEABLE DIAMOND WET HANG SELL

The interchangeable cutters result in a lower cost per hole than some other diamond drill solutions.

2712-B050

6.00mm 6.50mm

WATER BOTTLE SWIVEL SET

2712-B060

PART # 2712-WBS INCLUDES: s 3CREW TOP PRESSURE BULB assembly – connects to any PET 600ml soft drink bottle s (OSE TO CONNECT TO BODY s "ELT CLIP BOTTLE HOLDER

8.00mm

10.00mm

12.00mm

Bordo’s range of diamond drills are ideally suited to cutting ceramics, porcelain tiles and stone. They produce no-crack, burr-free holes with minimum spalling.

2712-WBS 5.00mm

DIAMOND MIST DRILL

2712-B085

2712-SH1

Rotary only action ensures low noise and vibration. Speed recommendations over page.

NOTE: Bottle not included

2712-B105 DIA SUITS DIAMOND MIST PACK MM DRILL SHANK QTY INTERCHANGEABLE DIAMOND CUTTERS 5.00 2712-B050 1 6.00 2712-B060 1 6.50 2712-B060 1 8.00 2712-B060 1 10.00 2712-B085 1 12.00 2712-B105 1

DESCRIPTION

2715-DT

MIST DRILL BODY - SH1 DRILLING TEMPLATE 4-13MM PRESSURE WATER BOTTLE WATER BOTTLE SWIVEL SET

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 49

PART NUMBER

41.88 49.83 49.83 83.76 91.72 104.70

2712-5.00 2712-6.00 2712-6.50 2712-8.00 2712-10.00 2712-12.00

SHANK SUITS CUTTER LENGTH PACK $ PART # MM QTY EACH NUMBER MM MIST DRILL SHANKS ENSURE CUTTER AND SHANK ARE COMPATIBLE - SEE ABOVE 050 5.0 69.79 100 1 2712-B050 060 6.0, 6.5, 8.0 69.79 100 1 2712-B060 085 10.0 78.52 100 1 2712-B085 105 12.0 78.52 100 1 2712-B105

2712-SH1

2712-WBS BELT CLIP

$ EACH

PIECES QTY 1 1 1 1

$ EACH 240.80 42.83 15.30 104.70

PART NUMBER 2712-SH1 2715-DT 2715-WB 2712-WBS

WWW.BORDO.COM.AU

PAGE 049 21/04/12 6:24 PM

DRILLS DIAMOND MIST METRIC SETS

DIAMOND MIST DRILL Bordo’s range of diamond drills are ideally suited to cutting ceramics, porcelain tiles and stone.

GROUP TYPE CUTTERS CUTTING SURFACE CUTTING METHOD PACKAGING

DIMD DIAMOND MIST DRILL REPLACEABLE DIAMOND WET INJECTION MOLDED CASE

They produce no-crack, burr-free holes with minimum spalling. The interchangeable cutters result in a lower cost per hole than some other diamond drill solutions. Rotary only action ensures low noise and vibration.

NEW SETS

SET TYPE MIST DRILL SET S1 MIST DRILL SET S2 MIST DRILL SET S3 MIST DRILL SET S4 MIST DRILL SET S5

$ SET 551.05 – – – –

PART NUMBER 2712-S1 – – – –

$ SET – 695.25 – – –

PART NUMBER – 2712-S2 – – –

$ SET – – 612.85 – –

PART NUMBER – – 2712-S3 – –

$ SET – – – 623.15 –

PART NUMBER – – – 2712-S4 –

$ SET – – – – 1,107.25

PART NUMBER – – – – 2712-S5

SET CONTENTS

QTY EACH

PART NUMBER

QTY EACH

PART NUMBER

QTY EACH

PART NUMBER

QTY EACH

PART NUMBER

QTY EACH

PART NUMBER

5MM CUTTER 6MM CUTTER 6.5MM CUTTER 8MM CUTTER 10MM CUTTER 12MM CUTTER B050 SHANK B060 SHANK B085 SHANK B105 SHANK SH1 BODY SWIVEL SET TEMPLATE

1 – – – – – 1 – – – 1 1 1

2712-5.00 – – – – – 2712-B050 – – – 2712-SH1 2712-WBS 2715-DT

– 1 1 1 – – 1 1 – – 1 1 1

– 2712-6.00 2712-6.50 2712-8.00 – – 2712-B050 2712-B060 – – 2712-SH1 2712-WBS 2715-DT

– – – – 1 – – – 1 – 1 1 1

– – – – 2712-10.00 – – – 2712-B085 – 2712-SH1 2712-WBS 2715-DT

– – – – – 1 – – – 1 1 1 1

– – – – – 2712-12.00 – – – 2712-B105 2712-SH1 2712-WBS 2715-DT

1 1 1 1 1 1 1 1 1 1 1 1 1

2712-5.00 2712-6.00 2712-6.50 2712-8.00 2712-10.00 2712-12.00 2712-B050 2712-B060 2712-B085 2712-B105 2712-SH1 2712-WBS 2715-DT

DIAMOND MIST DRILL Diamond mist drills are designed to deliver the correct amount of lubrication to maximise drill life and optimise drilling performance. The life of any type of diamond drill depends upon the hardness, abrasiveness and thickness of the material being drilled and the specific drilling techniques used (drill speed, pressure and lubrication). Using diamond drills in hard materials is not difficult, however drilling the hole takes time. You should consider that they aren’t “drilling” a hole – they are “grinding” a hole. As the diameter of the cutter increases the optimum rotation speed decreases. Cutter size 5.0 to 10.0mm Rotation Speed 15000 to 3000 RPM; Cutter size 11.0 to 24.0mm Rotation Speed 7000 to 1500 RPM

PAGE 050

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 50

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:24 PM

DRILLS STEP CLAM, SET, MERCH

STEP BRIGHT HSS 5MM 2 CLAM SHELL

HSS STEP DRILLS

4 - 12 4 - 20 4 - 30

1.0 2.0 2.0

6.0 8.0 10.0

OAL MM

PACK QTY

$ EACH

PART NUMBER

65.0 90.0 115.0

1 1 1

84.20 96.48 188.47

2600-M1 2600-M2 2600-M3

HIGH SPEED STEEL

Manufactured from premium quality high speed steel with double fluted ground cutting edge for long service life. Step Drill benefits s .O PILOT HOLE required TITANIUM CARBIDE

s %ASY TO SHARPEN s 3TEP DEPTH of 5mm

DIAMETER MM MAX

INCREMENT SHANK DIA. INCH INCH

1/8" - 1/2" 1/4" - 3/4"

1/32 1/16

1/4 3/8

OAL INCH

PACK QTY

$ EACH

PART NUMBER

3-1/8 2-3/4

1 1

84.20 96.48

2600-1 2600-2

s 3TEPLESS DRILLING IN the thinest sheets s "URR FREE DRILLING without sheet deformation s !UTOMATIC deburring

SET CONTENTS METRIC STEP DRILL SET 2600 -M1, 2600-M2, 2600-M3

MERCHANDISER TYPE STEP DRILLS - WALL MOUNT

MERCHANDISER CONTENTS

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 51

PIECES QTY 3

$ SET 369.15

PART NUMBER 2600-S1

$ MERCHANDISER 1,099.66

PART NUMBER 2600-D2

QTY EACH 2 2 2 2 2

SIZE MM/INCH 4-12 4-20 6-30 1/8-1/2 1/4-3/4

NEW PACKAGING

PART NUMBER 2600-M1 2600-M2 2600-M3 2600-1 2600-2

WWW.BORDO.COM.AU

PAGE 051 21/04/12 6:25 PM

for use in Natural Stone Artificial Stone Ceramics and Tiles

Multi–Facet Tungsten Carbide Tip

INCREMENT SHANK DIA. MM MM

for use in Masonry Natural Stone Artificial Stone Ceramics Steel / Metal Wood PVC / Acrylic Glass & Tiles

CERAMIC TILE DRILL

DIAMETER MM MAX

WOOD DRILL BRAD POINT

CARBIDE TIPPED

6.5mm

WOOD

800 RPM GREEN PLUG

MASONRY DRILL

1/4"

4 6 8 10 12 14 16 18 20 22 24 26 28 30

12.0mm

Ø mm

These Bordo’s range of step drills are ideal for electrical contractors, sheetmetal workers and auto mechanics. Step drills are designed for drilling repetitive holes in steel, stainless steel, copper, brass, aluminium, plastic, plexiglas, laminates and many other thin materials. 12.0mm

GROUP SURFACE FINISH MATERIAL STEP DEPTH FLUTES PACKAGING

15/32”

4 6 8 10 12 14 16 18 20

5 6 7 8 9 10 11 12

s 'ROUND -ICRO (ARDENED 3URFACE s /PTIMISED #UTTING %DGE 'EOMETRY

METRIC & FRAC.

Diamond Ground Titanium Carbide Tip

Ø mm

UNIVERSAL DRILL

Ø mm

TUNGSTEN CARBIDE

DRILLS STEP METRIC CLAM, SET, MERCH

NEW IMPROVED HSS-Co5 SPIRAL FLUTE TiN COATED STEP DRILLS Bordo’s NEW range of Cobalt Spiral Flute Titianium Nitride (TiN) coated step drills offer unparalleled performance when drilling hard metals such as stainless steel. s (33 #O MATERIAL provides increased performance and tool life when machining tough steels. s (IGH PERFORMANCE point for faster starting and reduced bit wander. s m ATTED SHANK prevents slipping in drill chuck. s 3PIRAL m UTES enable easier tool penetration. s 4I. COATING EXTENDS tool life, helps to dissipate heat, reduces friction and cold welding. s $EBURRING GROOVE simplifies deburring operation and negates the need for an additional manufacturing process.

NEW PACKAGING

HSS-Co5 (COBALT) Bordo’s Cobalt step drills are manufactured from HSS-Co5 steel which is very similar to M2 HSS with the important addition of 5% cobalt. The addition of cobalt to M2 HSS significantly increases heat resistance and allows the drill to run at higher temperatures without losing its temper (hardness). Cobalt drills provide increased performance and tool life when machining tough steels. HSS-Co5 (Cobalt) step drills are ideal for use in drilling stainless steel and high tensile steel.

PAGE 052

GROUP SURFACE FINISH MATERIAL FLUTE TYPE FLUTES PACKAGING

DIAMETER MM MAX 4 - 12 4 - 20 4 - 30

STEP GOLD COLOURED HSS-Co5 TiN COATED SPIRAL 2 CLAM SHELL

INCREMENT STEP DEPTH SHANK DIA. MM MM MM 1.0 2.0 2.0

5.0 5.0 5.0

6.0 8.0 10.0

OAL MM

PACK QTY

$ EACH

PART NUMBER

68.0 69.0 96.0

1 1 1

99.06 113.51 221.73

2602-M1 2602-M2 2602-M3

PIECES QTY 3

$ SET 434.30

PART NUMBER 2602-S1

SET CONTENTS METRIC STEP DRILL SET 2602 -M1, 2602-M2, 2602-M3

MERCHANDISER TYPE STEP DRILLS - WALL MOUNT MERCHANDISER CONTENTS

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 52

$ MERCHANDISER 984.13 QTY EACH 1 1 1 1 1 1 1 1

SIZE MM/INCH 4-12 4-20 6-30 1/8-1/2 1/4-3/4 4-12 4-20 4-30

PART NUMBER 2602-D2 PART NUMBER 2600-M1 2600-M2 2600-M3 2600-1 2600-2 2602-M1 2602-M2 2602-M3

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:25 PM

DRILLS STEP METRIC MERCHANDISER

GROUP SURFACE FINISH MATERIAL - STEP DRILL / COUNTERSINK COUNTERSINK TYPE COUNTERSINK ANGLE PACKAGING

MERCHANDISER TYPE COUNTERSINKS - PERSPEX BENCH

CSNK BRIGHT HSS / HSS-Co5 CROSS HOLE / SINGLE / TRIPLE 90º MERCHANDISER

$ MERCHANDISER POA

PART NUMBER 2600-D1

HSS STEP DRILLS These Bordo’s range of step drills are ideal for electrical contractors, sheetmetal workers and auto mechanics. Step drills are designed for drilling repetitive holes in steel, stainless steel, copper, brass, aluminium, plastic, plexiglas, laminates and many other thin materials. Manufactured from premium quality high speed steel with double fluted ground cutting edge for long service life. Step Drill benefits s .O PILOT HOLE required

MERCHANDISER CONTENTS COUNTERSINKS - CROSS HOLE

COUNTERSINKS - SINGLE FLUTE

COUNTERSINKS - THREE FLUTE

STEP DRILLS

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 53

QTY EACH

SIZE MM/INCH

PART NUMBER

3 3 2 2 1 1 3 2 2 1 1 3 2 2 1 1 2 1 1 2 2

6.35 10.0 15.0 20.0 25.0 30.0 10.0 15.0 20.0 25.0 30.0 10.0 14.4 20.5 28.0 35.0 4-12 4-20 6-30 1/8-1/2 1/4-3/4

3840-6.35 3840-10 3840-15 3840-20 3840-25 3840-30 3842-10 3842-15 3842-20 3842-25 3842-30 3843-10 3843-14.4 3843-20.5 3843-28 3843-35 2600-M1 2600-M2 2600-M3 2600-1 2600-2

WWW.BORDO.COM.AU

s %ASY TO SHARPEN s 3TEP DEPTH of 5mm s 3TEPLESS DRILLING IN the thinest sheets s "URR FREE DRILLING without sheet deformation s !UTOMATIC deburring

PAGE 053 21/04/12 6:25 PM

DRILLS SUPERFLEX FRACTIONAL HANG SELL

NEW PRODUCT

GROUP SURFACE FINISH MATERIAL – DRILL BODY / SHAFT POINT TYPE PACKAGING

FLEX BLACK HCS / SPRING STEEL WORM POINT HANG SELL

SUPERFLEX FLEXIBLE SHAFT WOOD DRILLS Bordo’s range of SuperFlex drills are ideal for installing wire or cable inside existing timber stud walls. The flexible spring steel shaft allows maximum flexibility of drilling position within the wall cavity. The extreme reach of SuperFlex drills (up to 1.8m) simplifies the previously time consuming task of drilling through noggins, top plates, bottom plates or studs inside finished walls. The SuperFlex drill features a double fluted reduced taper auger head with a self feeding lead screw point, fishing eyes at both ends, flexible memory retention shaft with flatted ends to ensure a positive chuck engagement.

DIA MM

OAL MM

OAL INCHES

PACK QTY

$ EACH

PART NUMBER

3/8 1/2 9/16 3/4 3/8 1/2 9/16 3/4

1372 1372 1372 1372 1829 1829 1829 1829

54 54 54 54 72 72 72 72

1 1 1 1 1 1 1 1

118.64 121.19 131.95 177.90 128.64 131.20 141.95 192.18

2680-3/8X54 2680-1/2X54 2680-9/16X54 2680-3/4X54 2680-3/8X72 2680-1/2X72 2680-9/16X72 2680-3/4X72

ACCESSORIES

$ EACH

PART NUMBER

POSITIONING HANDLE

74.71

2680-PH

Available in 3/8", 1/2", 9/16" and 3/4" diameters in lengths of 54" (1,372mm) and 72" (1,829mm).

PAGE 054

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 54

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:25 PM

DRILLS BRAD POINT METRIC CLAM & MERCH

BRAD POINT DRILLS

HIGH SPEED STEEL

TITANIUM CARBIDE

DIA MM

FL MM

OAL MM

SHANK MM

PACK QTY

$ EACH

PART NUMBER

3.00 4.00 5.00 6.00 7.00 8.00 9.00 10.00 11.00 12.00

33 43 52 57 65 70 70 75 94 101

61 75 86 93 109 117 115 120 142 151

3 4 5 6 7 8 9 10 10 10

1 1 1 1 1 1 1 1 1 1

13.46 13.46 13.46 13.46 15.02 15.02 19.14 23.80 30.20 32.93

2666-3.00 2666-4.00 2666-5.00 2666-6.00 2666-7.00 2666-8.00 2666-9.00 2666-10.00 2666-11.00 2666-12.00

Multi–Facet Tungsten Carbide Tip

s 4HE CENTRING TIP enables drilling of precise pilot holes. s %XTREME 0ERFORMANCE IN HARD CERAMIC MATERIALS

s (33 CONSTRUCTION ensures a long service life. usage s (OLD THE DRILL BIT perpendicular to the workpiece; start (slowly) with a low speed. Then continue drilling with the recommended speed. TUNGSTEN CARBIDE

s $RILL USING STEADY pressure; do not use a coolant. s ,IFT OUT REGULARLY AT least every 30mm, and remove spoil from the flutes. s 4HE WORKPIECE should always be clamped tightly. s .EVER LET THE DRILL tip impact on a hard support surface (metal/ stone).

MERCHANDISER TYPE BRAD POINT DRILL MERCHANDISER CONTENTS

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 55

$ MERCHANDISER 505.49

PART NUMBER 2666-D1

QTY EACH

SIZE MM/INCH

PART NUMBER

3 3 3 3 2 3 2 3 2 3

3.00 4.00 5.00 6.00 7.00 8.00 9.00 10.00 11.00 12.00

2666-3.00 2666-4.00 2666-5.00 2666-6.00 2666-7.00 2666-8.00 2666-9.00 2666-10.00 2666-11.00 2666-12.00

WWW.BORDO.COM.AU

s "LUNT DRILL BITS result in imprecise holes. Only sharp drill bits achieve optimum drilling results. Not for hammer action

PAGE 055 21/04/12 6:25 PM

22mm

for use in Natural Stone Artificial Stone Ceramics and Tiles

10.0mm

features s 0RECISION GROUND shoulder cutters provide completely round holes and minimise break through.

CERAMIC TILE DRILL

15/32” s 'ROUND -ICRO (ARDENED 3URFACE s /PTIMISED #UTTING %DGE 'EOMETRY

Diamond Ground Titanium Carbide Tip

for use in Masonry Natural Stone Artificial Stone Ceramics Steel / Metal Wood PVC / Acrylic Glass & Tiles

12.0mm

Brad point drills are ideally suited to drilling dowel holes and for drilling fibreboard, plywood, softwoods and hardwoods.

UNIVERSAL DRILL

WOOD DRILL BRAD POINT

CARBIDE TIPPED

6.5mm 800 RPM GREEN PLUG

MASONRY DRILL

WOOD

12.0mm

BPDB BRIGHT HSS W POINT 30º HELIX HANG SELL

1/4"

GROUP SURFACE FINISH MATERIAL POINT TYPE FLUTE TYPE PACKAGING

DRILLS SPADE METRIC CLAM SHELL

HIGH SPEED STEEL

s (EAVY DUTY SHANK prevents bending. s (EX SHANK PREVENTS slippage in chuck. s (EX SHANK ensures a positive lock in spade bit extensions. s 3UITS ALL STANDARD quick change adaptors.

PAGE 056

22mm

10.0mm s %XTREME 0ERFORMANCE IN HARD CERAMIC MATERIALS

12.0mm 15/32â&#x20AC;?

SPAD BLACK HIGH CARBON STEEL SELF CENTERING 1/4" HEX 405MM CLAM SHELL

TUNGSTEN CARBIDE

TITANIUM CARBIDE

s &AST STARTING

Multiâ&#x20AC;&#x201C;Facet Tungsten Carbide Tip

s ,OW COST PER HOLE

CERAMIC TILE DRILL

Spade Bit benefits

Diamond Ground Titanium Carbide Tip

Bordoâ&#x20AC;&#x2122;s range of standard length spade bits are ideal for creating holes in a wide variety of CARBIDE TIPPED timbers.

for use in Natural Stone Artificial Stone Ceramics and Tiles

s 'ROUND -ICRO (ARDENED 3URFACE s /PTIMISED #UTTING %DGE 'EOMETRY

800 RPM GREEN PLUG

HIGH CARBON SPADE BITS

for use in Masonry Natural Stone Artificial Stone Ceramics Steel / Metal Wood PVC / Acrylic Glass & Tiles

UNIVERSAL DRILL

WOOD DRILL BRAD POINT

WOOD

12.0mm

6.5mm

MASONRY DRILL

1/4"

NEW RANGE

SPAD BLACK HIGH CARBON STEEL SELF CENTERING 1/4" HEX 150MM CLAM SHELL

NEW DESIGN

GROUP SURFACE FINISH MATERIAL POINT SHANK OAL PACKAGING

DIA MM

DIA INCH EQUIV

PACK QTY

$ EACH

PART NUMBER

$ EACH

PART NUMBER

6.00 8.00 10.00 11.00 12.00 13.00 14.00 16.00 18.00 19.00 20.00 22.00 24.00 25.00 28.00 30.00 32.00 35.00 38.00

1/4 5/16 3/8 7/16 â&#x20AC;&#x201C; 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1-1/8 â&#x20AC;&#x201C; 1-1/4 1-3/8 1-1/2

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

8.38 8.38 10.19 10.26 10.26 10.42 10.59 10.90 11.68 11.68 11.68 11.68 13.11 13.11 13.11 13.38 13.64 13.99 14.71

2670-6 2670-8 2670-10 2670-11 2670-12 2670-13 2670-14 2670-16 2670-18 2670-19 2670-20 2670-22 2670-24 2670-25 2670-28 2670-30 2670-32 2670-35 2670-38

â&#x20AC;&#x201C; â&#x20AC;&#x201C; 21.25 â&#x20AC;&#x201C; â&#x20AC;&#x201C; â&#x20AC;&#x201C; â&#x20AC;&#x201C; 23.77 â&#x20AC;&#x201C; 29.43 29.43 29.43 â&#x20AC;&#x201C; 32.29 â&#x20AC;&#x201C; â&#x20AC;&#x201C; 32.29 â&#x20AC;&#x201C; â&#x20AC;&#x201C;

â&#x20AC;&#x201C; â&#x20AC;&#x201C; 2672-10 â&#x20AC;&#x201C; â&#x20AC;&#x201C; â&#x20AC;&#x201C; â&#x20AC;&#x201C; 2672-16 â&#x20AC;&#x201C; 2672-19 2672-20 2672-22 â&#x20AC;&#x201C; 2672-25 â&#x20AC;&#x201C; â&#x20AC;&#x201C; 2672-32 â&#x20AC;&#x201C; â&#x20AC;&#x201C;

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 56

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:25 PM

DRILLS SPADE METRIC SETS & MERCH

GROUP SURFACE FINISH MATERIAL POINT SHANK PACKAGING

SPAD BLACK HIGH CARBON STEEL SELF CENTERING 1/4" HEX CLAM SHELL

HIGH CARBON SPADE BITS Bordoâ&#x20AC;&#x2122;s range of standard length spade bits are ideal for creating holes in a wide variety of timbers. Spade Bit benefits s ,OW COST PER HOLE s &AST STARTING s (EAVY DUTY SHANK prevents bending. s (EX SHANK prevents slippage in chuck. s (EX SHANK ensures a positive lock in spade bit extensions.

SET DESCRIPTION SET CONTENTS SET 1 - CLAM SHELL 19, 22, 25MM SET 2 - CLAM SHELL 18, 19, 22, 25, 32MM SET 5 - PVC POUCH 10, 13, 16, 19, 22, 32MM

MERCHANDISER TYPE SPADE BITS MERCHANDISER CONTENTS

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 57

DRILLS QTY 3

$ SET 28.30

PART NUMBER 2670-S1

63.02

2670-S2

52.62

2670-S5

$ MERCHANDISER 774.18

PART NUMBER 2670-D1

QTY EACH 4 4 2 2 4 2 4 2 8 4 4 2 8 2 4 2 2 2 2

s 3UITS ALL STANDARD quick change adaptors.

SIZE PART MM/INCH NUMBER 6 2670-6 8 2670-8 10 2670-10 11 2670-11 12 2670-12 14 2670-14 16 2670-16 18 2670-18 19 2670-19 20 2670-20 22 2670-22 24 2670-24 25 2670-25 28 2670-28 32 2670-32 35 2670-35 38 2670-38 150 2670-EXT150 300 2670-EXT300

WWW.BORDO.COM.AU

PAGE 057 21/04/12 6:25 PM

DRILLS AUGER METRIC HANG TUBE

HIGH CARBON AUGER BITS Bordo’s range of auger bits are available in short, medium and long series OALs. Auger Bit benefits s &ULLY HEAT TREATED to increase durability and protect against bending in heavy duty drilling applications. s 3INGLE SPUR scribes hole edge and ensures a smooth hole finish. s #OARSE SCREW point provides fast starting in all wood types. s 3OLID CENTRE design provides increased bit rigidity. s /PTIMISED m UTE grind ensures fast chip removal improving speed and finish. s (EX SHANK ensures a positive lock in chucks and extensions.

NEW IMPROVED

GROUP SURFACE FINISH MATERIAL POINT-TYPE SHANK PACKAGING LENGTH

AUGR BRIGHT / BLUE HIGH CARBON STEEL WORM POINT 3/8" (NOMINAL) HEX* HANG TUBE SHORT

AUGR BRIGHT / BLUE HIGH CARBON STEEL WORM POINT 3/8” (NOMINAL) HEX* HANG TUBE MEDUIM

AUGR BRIGHT / BLUE HIGH CARBON STEEL WORM POINT 3/8” (NOMINAL) HEX* HANG TUBE LONG

DIA MM

PACK QTY

OAL MM

$ EACH

PART NUMBER

OAL MM

$ EACH

PART NUMBER

OAL MM

$ EACH

PART NUMBER

6.00 8.00 10.00 12.00 13.00 14.00 15.00 16.00 17.00 18.00 19.00 20.00 21.00 22.00 24.00 25.00 28.00 30.00 32.00 35.00 38.00

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

160 170 190 190 190 200 200 200 200 200 210 210 210 210 210 210 210 – 210 – 210

22.09 22.09 22.09 22.80 22.80 24.78 24.91 24.91 26.45 26.45 28.86 28.86 31.59 31.59 33.87 33.87 41.42 – 48.97 – 70.65

2660-6X160 2660-8X170 2660-10X190 2660-12X190 2660-13X190 2660-14X200 2660-15X200 2660-16X200 2660-17X200† 2660-18X200 2660-19X210 2660-20X210 2660-21X210 2660-22X210 2660-24X210† 2660-25X210 2660-28X210† – 2660-32X210† – 2660-38X210†

210 225 250 270 270 290 – 290 – 330 330 330 – 330 – 330 – 330 330 330 330

25.06 25.06 25.76 28.68 33.57 33.57 – 34.68 – 44.00 46.99 46.99 – 50.84 – 57.47 – 70.65 80.87 94.43 111.93

2660-6X210 2660-8X225 2660-10X250 2660-12X270 2660-13X290 2660-14X290 – 2660-16X290 – 2660-18X330 2660-19X330 2660-20X330 – 2660-22X330 – 2660-25X330 – 2660-30X330 2660-32X330 2660-35X330 2660-38X330

– – 500 500 500 500 – 500 – 500 500 500 – 500 – 500 – 500 500 500 500

– – 47.10 49.25 54.10 56.43 – 58.87 – 67.03 71.71 71.71 – 77.41 – 82.07 – 100.21 103.12 116.12 127.32

– – 2660-10X500 2660-12X500 2660-13X500 2660-14X500 – 2660-16X500 – 2660-18X500 2660-19X500 2660-20X500 – 2660-22X500 – 2660-25X500 – 2660-30X500† 2660-32X500† 2660-35X500† 2660-38X500†

$ PART SET NUMBER AUGER & EXTENSION SET 321.36 2660-25S1 25MM X 210MM AUGER BIT WITH 6 QUICK CHANGE 300MM LOCKING EXTENSIONS DESCRIPTION

NEW AND IMPROVED LOCKING EXTENSIONS

Bordo’s 3/8" x 300mm quick change extensions suit all accessories with 3/8" shank and power groove. Join multiple extensions together for extreme reach. Extensions are securely joined together by rotating the threaded quick change locking collar – no threaded rods to come undone! Extends your reach up to 1,700mm. Set contains 1 x 25mm high carbon steel, heat treated Auger Bit with coarse screw point and 6 x 300mm Quick Change Extensions.

* Older stock of auger drills may have 7/16” hex shank.

PAGE 058

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 58

†

This product is being discontinued and is only available until current stocks are depleted.

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:25 PM

DRILLS AUGER METRIC MERCHANDISERS

GROUP SURFACE FINISH MATERIAL POINT-TYPE SHANK PACKAGING LENGTH

MERCHANDISER TYPE AUGER BITS - 2 TIER MERCHANDISER AUGER BITS - 3 TIER MERCHANDISER

MERCHANDISER CONTENTS

AUGR BRIGHT / BLUE HIGH CARBON STEEL WORM POINT 3/8" (NOMINAL) HEX* HANG TUBE SHORT AND MEDIUM $ MERCHANDISER 790.63 –

PART NUMBER 2660-D1 –

AUGR BRIGHT / BLUE HIGH CARBON STEEL WORM POINT 3/8” (NOMINAL) HEX* HANG TUBE SHORT, MEDUIM AND LONG $ MERCHANDISER – 1,244.33

PART NUMBER – 2660-D2

QTY EACH

SIZE MM

OAL MM

PART NUMBER

QTY EACH

SIZE MM

OAL MM

PART NUMBER

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

10.00 12.00 16.00 25.00 8.00 10.00 12.00 13.00 14.00 16.00 19.00 20.00 25.00 10.00 12.00 16.00 19.00 20.00 EXT EXT

190 190 200 210 225 250 270 290 290 290 330 330 330 500 500 500 500 500 300 300

2660-10X190 2660-12X190 2660-16X200 2660-25X210 2660-8X225 2660-10X250 2660-12X270 2660-13X290 2660-14X290 2660-16X290 2660-19X330 2660-20X330 2660-25X330 2660-10X500 2660-12X500 2660-16X500 2660-19X500 2660-10X500 5750-38X300 5750-38716X300

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

8.00 10.00 12.00 13.00 14.00 16.00 20.00 22.00 25.00 8.00 10.00 12.00 13.00 14.00 16.00 18.00 19.00 20.00 25.00 10.00 12.00 13.00 14.00 16.00 18.00 19.00 20.00 22.00 EXT EXT

170 190 190 190 200 200 210 210 210 225 250 270 290 290 290 330 330 330 330 500 500 500 500 500 500 500 500 500 300 300

2660-8X170 2660-10X190 2660-12X190 2660-13X190 2660-14X200 2660-16X200 2660-20X210 2660-22X210 2660-25X210 2660-8X225 2660-10X250 2660-12X270 2660-13X290 2660-14X290 2660-16X290 2660-18X330 2660-19X330 2660-20X330 2660-25X330 2660-10X500 2660-12X500 2660-13X500 2660-14X500 2660-16X500 2660-18X500 2660-19X500 2660-20X500 2660-22X500 5750-38X300 5750-38716X300

Extensions & Adaptors to suit Hex Shank Auger Drills see page 207 5750-38716x300 pictured Outside diameter of 27.5mm – Ideally suited for use wth auger bits 28mm and above.

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 59

WWW.BORDO.COM.AU

PAGE 059 21/04/12 6:25 PM

DRILLS QUAD MAX METRIC CLAM, SETS, MERCH

QUAD MAX GROUP 4 FLUTE CUTTERS Use for all general drilling in wood Quad Max benefits s #OARSE SCREW POINT starts quickly in dry, wet & gummy wood. s #UTTING SPURS REDUCE splintering to ensure a smooth clean hole. s &OUR CUTTING surfaces â&#x20AC;&#x201C; up to 10 times faster than standard spade bits. s v HEX SHANK SUITS Power-HexÂŽ quick change adaptors and standard chucks. s &ULLY HEAT TREATED FOR increased durability.

QMWB BLUE OR BLACK HIGH CARBON STEEL 4 FLUTE WORM POINT 1/4â&#x20AC;? HEX* CLAM SHELL

SURFACE FINISH MATERIAL CUTTERS POINT SHANK PACKAGING

DIA MM

FL MM

OAL MM

SHANK MM

PACK QTY

$ EACH

PART NUMBER

16.00 20.00 22.00 25.00 32.00

70 70 80 90 90

165 165 165 165 165

1/4 1/4 1/4 1/4 7/16

1 1 1 1 1

14.07 14.74 14.74 15.85 20.02

2673-16 2673-20 2673-22 2673-25 2673-32

PIECES QTY 3

$ SET 40.45

PART NUMBER 2673-S1

75.93

2673-S2

$ MERCHANDISER 378.10 â&#x20AC;&#x201C; â&#x20AC;&#x201C;

PART NUMBER 2673-D1 â&#x20AC;&#x201C; â&#x20AC;&#x201C;

Recommended Speeds Size (mm) RPM 16 - 20 1500-2000 SET DESCRIPTION 22 - 25 1000-1500 SET CONTENTS 32 <1300

SET 1 - CLAM SHELL 16, 20, 25 MM SET 2 - CLAM SHELL 16, 20, 22, 25, 32 MM

MERCHANDISER TYPE QUAD MAX MERCHANDISER - D1 WOOD DRILLING MERCHANDISER - D2 WOOD DRILLING MERCHANDISER - D3 MERCHANDISER CONTENTS

SIZE PART MM NUMBER QUAD MAX CUTTERS 2 16.00 2673-16 2 20 00 2673-20 2 22 00 2673-22 2 25 00 2673-25 2 32 00 2673-32 2 SET 2673-S1 2 SET 2673-S2

QTY EACH

$ MERCHANDISER â&#x20AC;&#x201C; 622.26 â&#x20AC;&#x201C; QTY EACH 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

* Older stock of 32mm Quad Max 4 flute cutters may have 7/16â&#x20AC;? hex shank

PAGE 060

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 60

PART NUMBER â&#x20AC;&#x201C; 2673-D2 â&#x20AC;&#x201C;

SIZE PART MM NUMBER QUAD MAX CUTTERS 16 00 2673-16 20 00 2673-20 22 00 2673-22 25 00 2673-25 32 00 2673-32 SET 2673-S1 SET 2673-S2 SPADE BITS 10 00 2670-10 12 00 2670-12 14 00 2670-14 16 00 2670-16 19 00 2670-19 20 00 2670-20 22 00 2670-22 25 00 2670-25 32 00 2670-32 EXT300 5750-14X300

$ MERCHANDISER â&#x20AC;&#x201C; â&#x20AC;&#x201C; 793.07

PART NUMBER â&#x20AC;&#x201C; â&#x20AC;&#x201C; 2673-D3

SIZE PART MM NUMBER QUAD MAX CUTTERS 2 16 00 2673-16 2 20 00 2673-20 2 22 00 2673-22 2 25 00 2673-25 2 32 00 2673-32 2 SET 2673-S1 2 SET 2673-S2 SPADE BITS 2 10 00 2670-10 2 12 00 2670-12 2 14 00 2670-14 2 16 00 2670-16 2 19 00 2670-19 2 20 00 2670-20 2 22 00 2670-22 2 25 00 2670-25 2 32 00 2670-32 2 EXT300 5750-14X300 SELF FEEDING WOOD BITS 1 25 00 2674-25 1 32 00 2674-32 1 38 00 2674-38 1 51 00 2674-51 1 54 00 2674-54

QTY EACH

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:25 PM

DRILLS POWER-BORE METRIC HANG & MERCH

GROUP SURFACE FINISH MATERIAL POINT SHANK PACKAGING

AUGR BRIGHT HSS THREADED SPLIT POINT 11MM HEX HANG SELL

DIA MM

OAL MM

FL MM

PACK QTY

$ EACH

PART NUMBER

13.00 14.50 15.00 16.00 16.00 17.50 19.00 19.00 20.00 22.00 25.00 25.50 32.00 38.00

280.00 300.00 300.00 300.00 450.00 300.00 300.00 450.00 300.00 300.00 450.00 300.00 335.00 335.00

165.00 180.00 180.00 180.00 330.00 180.00 180.00 330.00 180.00 200.00 330.00 200.00 215.00 220.00

1 1 1 1 1 1 1 1 1 1 1 1 1 1

69.95 76.23 77.51 80.12 112.91 83.27 94.32 129.27 120.08 133.51 192.72 174.55 228.05 376.16

2662-13.0X280 2662-14.5X300 2662-15.0X300 2662-16.0X300 2662-16.0X450 2662-17.5X300 2662-19.0X300 2662-19.0X450 2662-20.0X300 2662-22.0X300 2662-25.0X450 2662-25.5X300 2662-32.0X335 2662-38.0X335

$ MERCHANDISER 2,115.23

PART NUMBER 2662-D1

MERCHANDISER TYPE POWER-BORE MERCHANDISER CONTENTS

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 61

QTY EACH

SIZE MM

PART NUMBER

2 2 2 2 2 2 2 1 1 1 1

13.00 14.50 15.00 16.00 17.50 19.00 20.00 22.00 25.50 32.00 38.00

2662-13.0X280 2662-14.5X300 2662-15.0X300 2662-16.0X300 2662-17.5X300 2662-19.0X300 2662-20.0X300 2662-22.0X300 2662-25.5X300 2662-32.0X335 2662-38.0X335

WWW.BORDO.COM.AU

POWERBORE DRILLS

Bordo’s range of PowerBore HSS split point auger bits outperform conventional augers in tough Australian hardwood. features s (EX SHANK eliminates chuck slip. s 3ELF FEEDING HSS threaded split point. s /UTPERFORMS and outlasts conventional augers. s %XTREME performance in tough Australian hardwoods. s (EAVY DUTY construction for long life – guaranteed!

PAGE 061 21/04/12 6:25 PM

DRILLS SELF FEEDING METRIC CLAMS & SETS

SELF FEEDING WOOD BITS

Bordoâ&#x20AC;&#x2122;s range of Self Feeding Wood Bits are ideal for drilling large diameter holes in soft woods for plumbing and conduit penetrations and a wide variety of other applications. Self Feeding Wood Bits feature: s 2EPLACEABLE COARSE screw points which drill quickly in dry, wet and gummy woods. s v HEX SHANKS to suit drills with 1/2â&#x20AC;? (or larger) chuck. s 0RECISION MILLED shank which eliminates wobble and runout. s 3PURS ON THE outside diameter cut holes cleanly and accurately. s $UAL INSIDE CUTTING planes shave hole radius for clean, smooth holes without pressure. s &ORGED IN ONE piece from high carbon steel for maximum strength under the toughest drilling conditions. s #LAM SHELL PACKED with spare screw point drill.

NEW PACKAGING

PAGE 062

GROUP SURFACE FINISH MATERIAL POINT CUTTERS PACKAGING

SFWB BRIGHT / BLUE FORGED HIGH CARBON STEEL REPLACEABLE SCREW POINT 2 CLAM SHELL

DIA MM

DIA INCH

SHANK INCH

PACK QTY

$ EACH

PART NUMBER

25.00 29.00 32.00 35.00 38.00 44.00 51.00 54.00 57.00 65.00 76.00 92.00 118.00

1 1-1/8 1-1/4 1-3/8 1-1/2 1-3/4 2 2-1/8 2-1/4 2-9/16 3 3-5/8 4-5/8

7/16 7/16 7/16 7/16 7/16 7/16 7/16 7/16 7/16 7/16 7/16 7/16 7/16

1 1 1 1 1 1 1 1 1 1 1 1 1

24.43 25.84 26.76 28.79 32.34 38.72 41.87 45.41 47.44 53.00 75.61 91.64 120.63

2674-25 2674-29 2674-32 2674-35 2674-38 2674-44 2674-51 2674-54 2674-57 2674-65 2674-76 2674-92 2674-118

$ SET 367.60 SELF FEEDING WOOD BITS - 9 PIECES 25, 29, 32, 35, 38, 44, 51, 54 AND 57MM PLUS 5 REPLACEMENT SCREW TIP POINTS AND A 300MM QUICK CHANGE EXTENSION SET TYPE

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 62

PART NUMBER 2674-S1

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:25 PM

DRILLS SELF FEEDING METRIC MERCHANDISER

GROUP SURFACE FINISH MATERIAL POINT CUTTERS PACKAGING

WOOD DRILLING MERCHANDISERS

Additional wood drilling merchandisers featuring spade bits, quad max 4 flute cutters and self feeding wood bits are listed on page 60.

SFWB BRIGHT / BLUE FORGED HIGH CARBON STEEL REPLACEABLE SCREW POINT 2 CLAM SHELL

$ MERCHANDISER 703.60

MERCHANDISER TYPE SELF FEEDING WOOD BITS

QTY EACH

MERCHANDISER CONTENTS

1 1 1 1 1 1 1 1 1 1 1 1 1 1

ACCESSORIES EXTENSION - 140MM (5-1/2") NO 1 TIP - SUITS SIZES 8 & 65MM NO 2 TIP - SUITS SIZES 75MM PLUS GRUB SCREW

PACK QTY 1 5 5 1

PART NUMBER 2674-D1

SIZE MM

PART NUMBER

25 2674-25 29 2674-29 32 2674-32 35 2674-35 38 2674-38 44 2674-44 51 2674-51 54 2674-54 57 2674-57 65 2674-65 76 2674-76 92 2674-92 118 2674-118 300 EXT 5750-38716X300

$ EACH 19.77 2.64 2.24 1.02

SELF FEEDING WOOD BITS

PART NUMBER 2674-EXT140 2674-TIP1 2674-TIP2 2674-GS

Extensions & Adaptors to suit Self Feeding Wood Bits see page 207 5750-38716x300 pictured Outside diameter of 27.5mm â&#x20AC;&#x201C; Ideally suited for use wth self feeding bits 29mm and above.

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 63

WWW.BORDO.COM.AU

PAGE 063 21/04/12 6:26 PM

DRILLS MASONRY STRAIGHT SHANK CLAM & MERCH

GROUP SURFACE FINISH POINT-TYPE SHANK TYPE PACKAGING LENGTH DIAMETER MM INCH 3.00 1/8 4.00 5/32 5.00 3/16 5.50 7/32 6.00 15/64 6.50 1/4 7.00 9/32 8.00 5/16 9.00 11/32 10.00 3/8 11.00 7/16 12.00 15/32 13.00 1/2 14.00 9/16 16.00 5/8 18.00 23/32 20.00 3/4 22.00 7/8 25.00 1

MSDB SHOT PEENED CARBIDE TIPPED STRAIGHT CLAM SHELL STANDARD FIXING PLUG COLOUR ● YELLOW – WHITE ● RED – ● GREEN – ● BLUE – ● ORANGE ● GREY – – – ● BLACK – – – –

FL MM 30 40 45 50 55 55 55 60 60 65 – – – – – – – – –

OAL SHANK MM MM 70 3.0 75 4.0 85 5.0 100 5.5 100 6.0 100 6.5 100 7.0 120 8.0 120 9.0 120 10.0 – – – – – – – – – – – – – – – – – –

MASONRY - STRAIGHT SHANK PLUG COLOUR ● YELLOW – WHITE ● RED – ● GREEN – ● BLUE ● ORANGE ● GREY – –

PAGE 064

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 64

PART NUMBER 2530-3.00X70 2530-4.00X75 2530-5.00X85 2530-5.50X100 2530-6.00X100 2530-6.50X100 2530-7.00X100 2530-8.00X120 2530-9.00X120 2530-10.00X120 – – – – – – – – –

$ MERCHANDISER 988.60

MERCHANDISER TYPE

MERCHANDISER CONTENTS

$ EACH 6.11 5.88 4.72 5.23 5.23 5.23 6.67 7.15 8.11 8.11 – – – – – – – – –

MSDB SHOT PEENED CARBIDE TIPPED STRAIGHT CLAM SHELL SINGLE BRICK FL OAL SHANK MM MM MM – – – – – – 86 150 5.0 86 150 5.5 86 150 6.0 86 150 6.5 86 150 7.0 86 150 8.0 – – – 86 150 10.0 86 150 11.0 86 150 12.0 86 150 13.0 86 150 14.0 86 150 9.5 86 150 12.5 86 150 12.5 86 150 12.5 86 150 12.5

$ EACH – – 9.59 9.23 9.15 9.34 10.04 10.55 – 12.10 13.57 14.63 15.98 20.56 23.88 31.45 31.45 35.35 52.00

MSDB SHOT PEENED CARBIDE TIPPED STRAIGHT CLAM SHELL DOUBLE BRICK

PART FL OAL SHANK NUMBER MM MM MM – – – – – – – – 2530-5.00X150 – – – 2530-5.50X150 – – – 2530-6.00X150 200 330 6.0 2530-6.50X150 200 330 6.5 2530-7.00X150 – – – 2530-8.00X150 200 330 8.0 – – – – 2530-10.00X150 200 330 10.0 2530-11.00X150 – – – 2530-12.00X150 200 330 12.0 2530-13.00X150 200 330 13.0 2530-14.00X150 200 330 14.0 2530-16.00X150 200 330 9.5 2530-18.00X150 200 330 12.5 2530-20.00X150 200 330 12.5 2530-22.00X150 200 330 12.5 2530-25.00X150 200 330 12.5

$ EACH – – – – 22.42 22.42 – 23.89 – 24.22 – 24.22 24.22 35.35 35.35 48.41 48.41 56.16 70.23

PART NUMBER – – – – 2530-6.00X330 2530-6.50X330 – 2530-8.00X330 – 2530-10.00X330 – 2530-12.00X330 2530-13.00X330 2530-14.00X330 2530-16.00X330 2530-18.00X330 2530-20.00X330 2530-22.00X330 2530-25.00X330

PART NUMBER 2530-D1

QTY SIZE PART QTY SIZE PART EACH MM NUMBER EACH MM NUMBER STANDARD FIXING SINGLE BRICK 10 3.0 2530-3.00X70 – – – 10 4.0 2530-4.00X75 – – – 10 5.0 2530-5.00X85 5 5.0 2530-5.00X150 10 5.5 2530-5.50X100 10 5.5 2530-5.50X150 5 6.0 2530-6.00X100 5 6.0 2530-6.00X150 5 6.5 2530-6.50X100 – – – 5 7.0 2530-7.00X100 – – – 10 8.0 2530-8.00X120 10 8.0 2530-8.00X150 5 10.0 2530-10.00X120 5 10.0 2530-10.00X150 – – – 5 11.0 2530-11.00X150 – – – 5 12.0 2530-12.00X150 – – – 5 13.0 2530-13.00X150

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:26 PM

DRILLS MASONRY COLOUR FLUTE CLAMS & SET

FL MM 30 45 50 55 60 65

OAL MM 70 85 100 100 120 120

SHANK MM 3.0 5.0 5.5 6.5 8.0 10.0

$ EACH 6.59 5.05 5.61 5.61 7.67 8.70

PART NUMBER 2532-3.00X70 2532-5.00X85 2532-5.50X100 2532-6.50X100 2532-8.00X120 2532-10.00X120

In Bordo’s colour flute masonry sets the carbide drills are colour coded to standard masonry plug colours. The sets are supplied in an attractive 15 piece cut down counter display box.

$ SET 46.28

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 65

HIGH SPEED STEEL

PART NUMBER 2532-S1

WWW.BORDO.COM.AU

12.0mm 15/32”

TITANIUM CARBIDE

SET STANDARD FIXING 15 SET DISPLAY BOX

PACKAGING LENGTH OUTER

MASONRY - COLOUR FLUTE

Colour Flute Masonry Drills feature: s 3TRAIGHT SHANK FOR use in a hammer drill with a standard chuck. s 0REMIUM GRADE carbide. s (IGH TEMPERATURE brazing for longer life. s &LUTES DESIGNED for optimum spoil removal. s #OLOUR CODED TO match masonry wall plugs.

Colour Flute Masonry Drills are suitable for use in: s #ONCRETE s "RICK s "LOCK s 3TONE

COLOUR FLUTE MASONRY SET

SET TYPE

for use in Masonry Natural Stone Artificial Stone Ceramics Steel / Metal Wood PVC / Acrylic Glass & Tiles

s 'ROUND -ICRO (ARDENED 3URFACE s /PTIMISED #UTTING %DGE 'EOMETRY

PLUG COLOUR ● YELLOW WHITE ● RED ● GREEN ● BLUE ● ORANGE

WOOD

Diamond Ground Titanium Carbide Tip

DIAMETER MM INCH 3.00 1/8 5.00 3/16 5.50 7/32 6.50 1/4 8.00 5/16 10.00 3/8

Bordo’s colour flute masonry drill set features “colour coded” drill sizes to match standard masonry wall plug (and spaghetti) colour coding conventions. Now you no longer need to look up reference tables to determine what drill size to use with your masonry plug - just match the colour!

UNIVERSAL DRILL

CARBIDE TIPPED

COLOUR FLUTE MASONRY

12.0mm

6.5mm 800 RPM GREEN PLUG

MASONRY DRILL

1/4"

BRIGHT WITH COLOUR CODED FLUTES CARBIDE TIPPED STRAIGHT CLAM SHELL STANDARD FIXING

MSDB

SURFACE FINISH POINT-TYPE SHANK TYPE PACKAGING LENGTH

WOOD DRILL BRAD POINT

GROUP

PAGE 065 21/04/12 6:26 PM

DRILLS MASONRY SDS MULTI-FIT HANG SELL

SDS Multi-fit

SDS Multi-fit Suits all Rotary Hammers fitted with an SDS Plus or Ramset R3® chuck

GROUP SURFACE FINISH MATERIAL POINT-TYPE SHANK TYPE PACKAGING

DIA MM 5.00 5.50 6.00 6.50 8.00 10.00 5.00 5.50 6.00 6.50 7.00* 8.00 10.00 12.00 13.00* 15.00* 16.00

5.00 6.00 6.50 8.00 10.00 12.00 16.00 18.00 20.00 8.00* 10.00 12.00 14.00 22.00 24.00 25.00

OAL

6.50* 10.00* 12.00 14.00* 16.00 18.00 20.00 22.00 24.00 25.00

FL MM 50 50 50 50 50 50 50 100 100 100 100 100 100 100 100 100 100 100 100 150 150 150 150 150 150 150 150 150 150 200 200 200 200 200 200 200 200 400 400 400 400 400 100 100 100 150 150 150

SDSM SHOT PEENED CHROME, NICKEL, MOLYBDENUM STEEL ALLOY VACUUM BRAZED CARBIDE SDS MULTI-FIT HANG TAB

OAL MM 110 110 110 110 110 110 110 160 160 160 160 160 160 160 160 160 160 160 160 210 210 210 210 210 210 210 210 210 210 260 260 260 260 260 260 260 260 450 450 450 450 450 450 450 450 450 450 450

PACK QTY 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

$ EACH SDS MULTI-FIT 10.99 10.99 10.99 11.78 13.17 14.82 SDS MULTI-FIT 12.22 12.22 12.22 13.85 15.35 13.54 15.30 19.89 22.55 25.75 29.61 SDS MULTI-FIT 18.76 18.76 18.76 17.66 22.20 24.35 38.81 48.55 60.84 SDS MULTI-FIT 24.49 24.49 25.19 30.57 93.42 106.42 113.46 SDS MULTI-FIT 41.67 41.67 43.95 52.58 52.58 78.46 78.46 108.77 136.79 136.79

PART NUMBER SDS MULTI-FIT 2540-5.00X110 2540-5.50X110 2540-6.00X110 2540-6.50X110 2540-8.00X110 2540-10.00X110 SDS MULTI-FIT 2540-5.00X160 2540-5.50X160 2540-6.00X160 2540-6.50X160 2540-7.00X160 2540-8.00X160 2540-10.00X160 2540-12.00X160 2540-13.00X160 2540-15.00X160 2540-16.00X160 SDS MULTI-FIT 2540-5.00X210 2540-6.00X210 2540-6.50X210 2540-8.00X210 2540-10.00X210 2540-12.00X210 2540-16.00X210 2540-18.00X210 2540-20.00X210 SDS MULTI-FIT 2540-8.00X260 2540-10.00X260 2540-12.00X260 2540-14.00X260 2540-22.00X260 2540-24.00X260 2540-25.00X260 SDS MULTI-FIT 2540-6.50X450 2540-10.00X450 2540-12.00X450 2540-14.00X450 2540-16.00X450 2540-18.00X450 2540-20.00X450 2540-22.00X450 2540-24.00X450 2540-25.00X450

* Discontinued item. These items will only be available until current stocks are depleted. The following are registered trademarks R3® – Illinois Tool Works Ramset® – Illinois Tool Works SDS Plus® – Robert Bosch Power Tool Corp. SDS Max® – Robert Bosch Power Tool Corp.

PAGE 066

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 66

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:26 PM

DRILLS MASONRY SDS MULTI-FIT SET & MERCH

GROUP SURFACE FINISH MATERIAL POINT-TYPE SHANK TYPE PACKAGING

SDSM SHOT PEENED CHROME, NICKEL, MOLYBDENUM STEEL ALLOY VACUUM BRAZED CARBIDE SDS MULTI-FIT HANG TAB

SDS Multi-fit

SDS Multi-fit Suits all Rotary Hammers fitted with an SDS Plus or Ramset R3速 chuck

$ SET 64.54

PART NUMBER 2540-S1

$ MERCHANDISER 1,830.59

PART NUMBER 2540-D1

SET TYPE SDS MULTI-FIT - 5 PIECES 5.0, 5.5, 6.5, 8.0, 10.0MM X 160MM

MERCHANDISER TYPE MASONRY - SDS MULTI-FIT MERCHANDISER CONTENTS

QTY EACH 3 3 3 3 3 3 3 3 3 3 3 3 3 3

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 67

PART NUMBER 2540-5.00X110 2540-5.50X110 2540-6.00X110 2540-6.50X110 2540-8.00X110 2540-10.00X110 2540-5.00X160 2540-5.50X160 2540-6.00X160 2540-6.50X160 2540-8.00X160 2540-10.00X160 2540-12.00X160 2540-16.00X160

QTY EACH 2 2 2 2 2 2 2 2 2 2 2 2 2

PART NUMBER 2540-5.00X210 2540-6.00X210 2540-8.00X210 2540-10.00X210 2540-12.00X210 2540-16.00X210 2540-18.00X210 2540-20.00X210 2540-10.00X260 2540-12.00X260 2540-22.00X260 2540-24.00X260 2540-25.00X260

WWW.BORDO.COM.AU

PAGE 067 21/04/12 6:26 PM

Bordoâ&#x20AC;&#x2122;s range of Deltagon SDS Plus drill bits offer outstanding performance in a wide variety of masonry drilling applications. Deltagon bits offer specific advantages over standard SDS Plus bits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eltagon SDS-Plus Masonry Bit Round Hole

Conventional Masonry Bit Triangular Hole

Superior hole roundness results in increased anchor performance.

! . $ # $% # %# # ! & !" % % % ! . $ # $% # %# # ! &$ $ *

18193_Bordo_BuyersGuide_082011_PJ32.indd 68

21/04/12 6:27 PM

DRILLS DELTAGON SDS-PLUS HANG SELL

GROUP SURFACE FINISH MATERIAL POINT-TYPE SHANK TYPE PACKAGING

DIA MM

4.00 5.00 5.50 6.00 6.50 8.00 10.00

59.5 18

24.5

5.00 5.50 6.00 6.50 7.00 8.00 10.00 12.00 13.00 14.00 15.00 16.00 18.00 20.00 5.00 5.50 6.00 6.50 8.00 10.00 12.00 14.00 16.00 18.00 20.00

ASYMETRICAL SOLID CARBIDE 5 CUTTER HEAD

22.00 24.00 25.00 26.00 8.00 10.00 12.00 14.00 16.00 18.00 20.00

FL MM 50 50 50 50 50 50 50 50 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 150 150 150 150 150 150 150 150 150 150 150 150 200 200 200 200 200 250 250 250 250 250 250 250 250

SDSD SHOT PEENED CHROME, NICKEL, MOLYBDENUM STEEL ALLOY SOLID MULTI-FACET CARBIDE SDS-PLUS HANG TAB

OAL MM 116 116 116 116 116 116 116 116 166 166 166 166 166 166 166 166 166 166 166 166 166 166 166 216 216 216 216 216 216 216 216 216 216 216 216 270 270 270 270 270 316 316 316 316 316 316 316 316

PACK QTY 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

$ EACH DELTAGON SDS-PLUS 25.45 26.46 26.46 27.41 27.41 27.41 35.24 DELTAGON SDS-PLUS 29.37 29.37 29.37 29.37 29.37 30.37 36.26 37.20 40.17 45.03 56.77 62.65 73.45 86.15 DELTAGON SDS-PLUS 43.07 46.04 46.04 46.04 46.99 53.87 67.58 80.27 97.89 111.60 127.26 DELTAGON SDS-PLUS 156.62 176.20 186.00 195.78 DELTAGON SDS-PLUS 58.73 64.61 79.32 87.16 113.56 137.05 156.62

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 69

PART NUMBER DELTAGON SDS-PLUS 2543-4.00X116 2543-5.00X116 2543-5.50X116 2543-6.00X116 2543-6.50X116 2543-8.00X116 2543-10.00X116 DELTAGON SDS-PLUS 2543-5.00X166 2543-5.50X166 2543-6.00X166 2543-6.50X166 2543-7.00X166 2543-8.00X166 2543-10.00X166 2543-12.00X166 2543-13.00X166 2543-14.00X166 2543-15.00X166 2543-16.00X166 2543-18.00X166 2543-20.00X166 DELTAGON SDS-PLUS 2543-5.00X216 2543-5.50X216 2543-6.00X216 2543-6.50X216 2543-8.00X216 2543-10.00X216 2543-12.00X216 2543-14.00X216 2543-16.00X216 2543-18.00X216 2543-20.00X216 DELTAGON SDS-PLUS 2543-22.00X270 2543-24.00X270 2543-25.00X270 2543-26.00X270 DELTAGON SDS-PLUS 2543-8.00X316 2543-10.00X316 2543-12.00X316 2543-14.00X316 2543-16.00X316 2543-18.00X316 2543-20.00X316

WWW.BORDO.COM.AU

SDS-Plus

SDS-Plus Suits all Rotary Hammers fitted with an SDS-Plus chuck

OAL

PAGE 069 21/04/12 6:27 PM

DRILLS DELTAGON SDS-PLUS HANG SELL & SETS

SDS-Plus

SDS Plus Suits all Rotary Hammers fitted with an SDS Plus chuck

GROUP SURFACE FINISH MATERIAL POINT-TYPE SHANK TYPE PACKAGING

DIA MM 22.00 24.00 25.00 26.00 10.00 12.00 14.00 16.00 18.00 20.00 22.00 24.00 25.00 26.00

FL MM 250 250 250 250 250 400 400 400 400 400 400 400 400 400 400 400 400

SDSD SHOT PEENED CHROME, NICKEL, MOLYBDENUM STEEL ALLOY SOLID MULTI-FACET CARBIDE SDS-PLUS HANG TAB

OAL MM 320 320 320 320 320 466 466 466 466 466 466 466 470 470 470 470 470

PACK QTY 1 1 1 1 1 1 1 1 1 1 1 1 1 1

$ EACH DELTAGON SDS-PLUS 172.29 189.91 209.49 221.23 DELTAGON SDS-PLUS 84.18 103.76 121.39 148.79 154.66 184.04 DELTAGON SDS-PLUS 191.87 211.45 231.02 236.90

PART NUMBER DELTAGON SDS-PLUS 2543-22.00X320 2543-24.00X320 2543-25.00X320 2543-26.00X320 DELTAGON SDS-PLUS 2543-10.00X466 2543-12.00X466 2543-14.00X466 2543-16.00X466 2543-18.00X466 2543-20.00X466 DELTAGON SDS-PLUS 2543-22.00X470 2543-24.00X470 2543-25.00X470 2543-26.00X470

ASYMETRICAL SOLID CARBIDE 5 CUTTER HEAD

59.5

24.5

SET TYPE

PAGE 070

DELTA 5 PACK S1 – 166MM OAL 5.0, 5.5, 6.5, 8.0, 10.0MM DELTA 5 PACK S2 – 166MM OAL 5.5, 6.5, 8.0, 10.0, 12.0MM DELTA 3 PACK S3 – 166MM OAL 5.5, 6.5, 8.0MM

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 70

$ EACH 154.74

PART NUMBER 2543-S1

$ EACH –

PART NUMBER –

$ EACH –

PART NUMBER –

–

162.56

2543-S2

–

89.12

2543-S3

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:27 PM

DRILLS DELTAGON SDS-PLUS MERCHANDISERS

GROUP SURFACE FINISH MATERIAL POINT-TYPE SHANK TYPE PACKAGING

MERCHANDISER TYPE DELTAGON SDS-PLUS – WALL MOUNT MERCHANDISER CONTENTS

MERCHANDISER TYPE DELTAGON SDS-PLUS – UNIVERSAL MERCHANDISER CONTENTS

SDSD SHOT PEENED CHROME, NICKEL, MOLYBDENUM STEEL ALLOY SOLID MULTI-FACET CARBIDE SDS-PLUS HANG TAB $ MERCHANDISER 2,073.79 QTY EACH 2 1 2 2 1 1 2 1 2 2 1 2 2 2 1 1

PART NUMBER 2543-5.00X116 2543-5.50X116 2543-6.00X116 2543-6.50X116 2543-8.00X116 2543-10.00X116 2543-5.00X166 2543-5.50X166 2543-6.00X166 2543-6.50X166 2543-7.00X166 2543-8.00X166 2543-10.00X166 2543-12.00X166 2543-13.00X166 2543-16.00X166

PART NUMBER 2543-D1 QTY EACH 1 1 1 2 2 1 1 1 1 1 1 1 1 1

$ MERCHANDISER 865.76 QTY EACH 2 2 2 2 2

PART NUMBER 2543-5.50X166 2543-6.50X166 2543-8.00X166 2543-10.00X166 2543-12.00X166

SDS-Plus

SDS-Plus Suits all Rotary Hammers fitted with an SDS-Plus chuck

PART NUMBER 2543-5.00X216 2543-6.00X216 2543-8.00X216 2543-10.00X216 2543-12.00X216 2543-14.00X216 2543-16.00X216 2543-18.00X216 2543-20.00X216 2543-10.00X316 2543-12.00X316 2543-10.00X466 2543-12.00X466 2543-16.00X466

PART NUMBER 2543-D4 QTY EACH 2 2 2 2

PART NUMBER 2543-6.50X216 2543-10.00X266 2543-14.00X266 2543-12.00X316

59.5 18

24.5

DELTAGON SDS-PLUS UNIVERSAL MERCHANDISER

This high impact merchandiser can used as a bench mounted display and it can also be used on existing slatwall and pegboard merchandising systems.

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 71

WWW.BORDO.COM.AU

PAGE 071 21/04/12 6:27 PM

DRILLS MASONRY SDS-PLUS HANG SELL

SDS-Plus

SDS Plus Suits all Rotary Hammers fitted with an SDS Plus chuck

GROUP SURFACE FINISH MATERIAL POINT TYPE SHANK TYPE PACKAGING DIA MM 4.00 5.00 5.50 6.00 6.50 7.00 8.00 10.00 5.00 5.50 6.00 6.50 7.00 8.00 10.00 12.00 13.00 15.00 16.00

SDS-Plus QUAD CUTTER Utilises 4 cutting surfaces to ensure greater productivity

PAGE 072

5.00 5.50 6.00 6.50 8.00 10.00 11.00 12.00 16.00 18.00 20.00 8.00 10.00 12.00 13.00 14.00 15.00 16.00 18.00 20.00 22.00 24.00 25.00

FL MM 50 50 50 50 50 50 50 50 50 100 100 100 100 100 100 100 100 100 100 100 100 150 150 150 150 150 150 150 150 150 150 150 150 200 200 200 200 200 200 200 200 200 200 200 200 200

SDSP SDSP SHOT PEENED SHOT PEENED CHROME, NICKEL, MOLYBDENUM STEEL ALLOY CHROME, NICKEL, MOLYBDENUM STEEL ALLOY VACUUM BRAZED CARBIDE QUAD HEAD VACUUM BRAZED CARBIDE SDS-PLUS SDS-PLUS HANG TAB HANG TAB OAL MM 110 110 110 110 110 110 110 110 110 160 160 160 160 160 160 160 160 160 160 160 160 210 210 210 210 210 210 210 210 210 210 210 210 260 260 260 260 260 260 260 260 260 260 260 260 260

PACK QTY 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 72

$ EACH SDS PLUS 10.99 10.99 10.99 10.99 11.78 11.78 13.17 14.82 SDS PLUS 12.22 12.22 12.22 13.85 15.35 13.54 15.30 19.89 22.55 25.75 29.61 SDS PLUS 18.76 18.76 18.76 18.76 17.66 22.20 24.02 24.35 38.81 48.55 60.84 SDS PLUS 24.49 24.49 25.19 26.88 30.57 41.14 – – – 93.42 106.42 113.46

PART NUMBER SDS PLUS 2544-4.00X110 2544-5.00X110 2544-5.50X110 2544-6.00X110 2544-6.50X110 2544-7.00X110 2544-8.00X110 2544-10.00X110 SDS PLUS 2544-5.00X160 2544-5.50X160 2544-6.00X160 2544-6.50X160 2544-7.00X160 2544-8.00X160 2544-10.00X160 2544-12.00X160 2544-13.00X160 2544-15.00X160 2544-16.00X160 SDS PLUS 2544-5.00X210 2544-5.50X210 2544-6.00X210 2544-6.50X210 2544-8.00X210 2544-10.00X210 2544-11.00X210 2544-12.00X210 2544-16.00X210 2544-18.00X210 2544-20.00X210 SDS PLUS 2544-8.00X260 2544-10.00X260 2544-12.00X260 2544-13.00X260 2544-14.00X260 2544-15.00X260 – – – 2544-22.00X260 2544-24.00X260 2544-25.00X260

$ EACH QUAD CUTTER – – – – – – – – QUAD CUTTER – – – – – – – – – – – QUAD CUTTER – – – – – – – – – – – QUAD CUTTER – – – – – – 105.10 112.39 122.73 – – –

PART NUMBER QUAD CUTTER – – – – – – – – QUAD CUTTER – – – – – – – – – – – QUAD CUTTER – – – – – – – – – – – QUAD CUTTER – – – – – – 2545-16.00X260 2545-18.00X260 2545-20.00X260 – – –

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:27 PM

DRILLS MASONRY SDS-PLUS HANG SELL & SET

GROUP SURFACE FINISH MATERIAL POINT TYPE SHANK TYPE PACKAGING DIA MM 6.50 8.00 10.00 12.00 14.00 16.00 18.00 20.00 22.00 24.00 25.00 26.00 8.00 10.00 12.00 14.00 16.00 18.00 20.00 22.00 25.00 10.00 12.00 14.00 16.00 18.00 20.00 22.00 26.00

FL MM 400 400 400 400 400 400 400 400 400 400 400 400 400 550 550 550 550 550 550 550 550 550 550 950 950 950 950 950 950 950 950 950

SDSP SDSP SHOT PEENED SHOT PEENED CHROME, NICKEL, MOLYBDENUM STEEL ALLOY CHROME, NICKEL, MOLYBDENUM STEEL ALLOY VACUUM BRAZED CARBIDE QUAD HEAD VACUUM BRAZED CARBIDE SDS-PLUS SDS-PLUS HANG TAB HANG TAB OAL MM 450 450 450 450 450 450 450 450 450 450 450 450 450 600 600 600 600 600 600 600 600 600 600 1000 1000 1000 1000 1000 1000 1000 1000 1000

PACK QTY 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

$ EACH SDS PLUS 56.31 46.08 41.67 43.95 52.58 52.58 78.46 78.46 108.77 136.79 136.79 149.05 SDS PLUS 80.90 85.85 118.97 152.06 176.29 212.17 262.16 290.78 304.22 SDS PLUS 213.86 228.12 242.37 256.62 270.87 313.69 348.86 364.69

PART NUMBER SDS PLUS 2544-6.50X450 2544-8.00X450 2544-10.00X450 2544-12.00X450 2544-14.00X450 2544-16.00X450 2544-18.00X450 2544-20.00X450 2544-22.00X450 2544-24.00X450 2544-25.00X450 2544-26.00X450 SDS PLUS 2544-8.00X600 2544-10.00X600 2544-12.00X600 2544-14.00X600 2544-16.00X600 2544-18.00X600 2544-20.00X600 2544-22.00X600 2544-25.00X600 SDS PLUS 2544-10.00X1000 2544-12.00X1000 2544-14.00X1000 2544-16.00X1000 2544-18.00X1000 2544-20.00X1000 2544-22.00X1000 2544-25.00X1000

$ EACH QUAD CUTTER – – – – – 132.27 135.26 139.72 147.15 168.16 172.68 195.16 QUAD CUTTER – – – – – – – – – QUAD CUTTER – – – – – – – –

PART NUMBER QUAD CUTTER – – – – – 2545-16.00X450 2545-18.00X450 2545-20.00X450 2545-22.00X450 2545-24.00X450 2545-25.00X450 2545-26.00X450 QUAD CUTTER – – – – – – – – – QUAD CUTTER – – – – – – – –

SDS-Plus

SDS-Plus Suits all Rotary Hammers fitted with an SDS-Plus chuck

59.5 18

SET TYPE SDS-PLUS - 5 PIECES 5.0, 5.5, 6.5, 8.0, 10.0MM X 160MM

$ SET 64.54

PART NUMBER 2544-S1

24.5

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 73

WWW.BORDO.COM.AU

PAGE 073 21/04/12 6:27 PM

DRILLS MASONRY SDS-PLUS HANG SELL

SDS-Plus

SDS Plus Suits all Rotary Hammers fitted with an SDS Plus chuck

GROUP SURFACE FINISH MATERIAL POINT TYPE SHANK TYPE PACKAGING

SDS-PLUS – WALL MOUNT MERCHANDISER CONTENTS

SDS-Plus QUAD CUTTER Utilises 4 cutting surfaces to ensure greater productivity

PAGE 074

$ MERCHANDISER 5,314.85

MERCHANDISER TYPE

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 74

QTY EACH 9 3 6 6 3 3 6 3 6 6 3 3 3 3 3 3 3 3 3 2 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1

PART NUMBER 2544-5.00X110 2544-5.50X110 2544-6.00X110 2544-6.50X110 2544-8.00X110 2544-10.00X110 2544-5.00X160 2544-5.50X160 2544-6.00X160 2544-6.50X160 2544-8.00X160 2544-10.00X160 2544-12.00X160 2544-5.00X210 2544-5.50X210 2544-6.00X210 2544-6.50X210 2544-8.00X210 2544-10.00X210 2544-12.00X210 2544-16.00X210 2544-18.00X210 2544-20.00X210 2544-8.00X260 2544-10.00X260 2544-12.00X260 2544-14.00X260 2544-22.00X260 2544-24.00X260 2544-25.00X260 2544-6.50X450 2544-8.00X450 2544-10.00X450 2544-12.00X450 2544-14.00X450 2544-16.00X450 2544-18.00X450 2544-20.00X450 2544-22.00X450 2544-25.00X450 2544-12.00X600 2544-16.00X600 2544-20.00X600

PART NUMBER 2544-D2 QTY EACH 2 2 2 1 1 1 1 1 1 1 – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –

PART NUMBER 2545-16X260 2545-18X260 2545-20X260 2545-16X450 2545-18X450 2545-20X450 2545-22X450 2545-24X450 2545-25X450 2545-26X450 – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:27 PM

DRILLS DELTAGON SDS-MAX HANG SELL

GROUP SURFACE FINISH MATERIAL POINT-TYPE SHANK TYPE PACKAGING

DIA MM 10.00 12.00 14.00 15.00 16.00 18.00 18.00 20.00 20.00 22.00 24.00 25.00 24.00 25.00 26.00 10.00 12.00 14.00 16.00 18.00 20.00

FL MM 165 165 165 165 165 165 200 200 200 200 200 200 260 260 260 400 400 400 400 400 400 400 400 400 400 400

SMXD SHOT PEENED CHROME, NICKEL, MOLYBDENUM STEEL ALLOY SOLID MULTI-FACET CARBIDE – 3 CUTTER SDS-MAX HANG TAB

OAL MM 305 305 305 305 305 305 340 340 340 340 340 340 380 380 380 520 520 520 520 540 540 540 540 540 540 540

PACK QTY 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

$ EACH DELTAGON 3 CUTTER 123.66 126.00 137.67 140.01 142.35 DELTAGON 3 CUTTER 172.68 – 196.01 – 228.68 DELTAGON 3 CUTTER – – DELTAGON SDS-MAX – – – DELTAGON 3 CUTTER 203.00 205.34 210.01 214.67 219.34 233.34

PART NUMBER DELTAGON 3 CUTTER 2549-10.00X305 2549-12.00X305 2549-14.00X305 2549-15.00X305 2549-16.00X305 DELTAGON 3 CUTTER 2549-18.00X340 – 2549-20.00X340 – 2549-22.00X340 DELTAGON 3 CUTTER – – DELTAGON 3 CUTTER – – – DELTAGON 3 CUTTER 2549-10.00X540 2549-12.00X540 2549-14.00X540 2549-16.00X540 2549-18.00X540 2549-20.00X540

SMXD SHOT PEENED CHROME, NICKEL, MOLYBDENUM STEEL ALLOY SOLID MULTI-FACET CARBIDE – 5 CUTTER SDS-MAX HANG TAB

$ EACH DELTAGON 5 CUTTER – – – – – DELTAGON 5 CUTTER – 194.45 – 205.26 – DELTAGON 5 CUTTER 256.83 280.02 DELTAGON 5 CUTTER 303.52 345.35 350.22 DELTAGON 5 CUTTER – – – – – –

PART NUMBER DELTAGON 5 CUTTER – – – – – DELTAGON 5 CUTTER – 2549-18.00X340-5 – 2549-20.00X340-5 – DELTAGON 5 CUTTER 2549-24.00X380 2549-25.00X380 DELTAGON 5 CUTTER 2549-24.00X380 2549-25.00X520 2549-26.00X520 DELTAGON 5 CUTTER – – – – – –

NEW PRODUCT SDS-Max

SDS-Max Suits all Rotary Hammers fitted with an SDS-Max chuck

ASYMETRICAL SOLID CARBIDE 5 CUTTER HEAD

Standard Deltagon bits feature a solid triple flute carbide head. Bits over 20mm feature an asymetrical solid 5 cutter carbide head for improved cutting efficiency, reduced vibration and superior performance in mesh and bar. Two extra sizes of SDS-MAX bits are also available in the ultra performance 5 cutter configuration - 18 & 20MM. These sizes are ideal for use in drilling pre-cast concrete.

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 75

WWW.BORDO.COM.AU

PAGE 075 21/04/12 6:28 PM

DRILLS MASONRY SDS-MAX HANG SELL

SDS-Max

SDS-Max Suits all Rotary Hammers fitted with an SDS-Max chuck

PAGE 076

GROUP SURFACE FINISH MATERIAL POINT TYPE SHANK TYPE PACKAGING DIA MM

FL MM 250 12.00 250 14.00 250 16.00 250 18.00 250 230 20.00 230 22.00 230 25.00 230 28.00 230 30.00 230 32.00 230 35.00 230 38.00 230 40.00 230 450 12.00 450 14.00 450 16.00 450 18.00 450 200 20.00 430 22.00 430 25.00 430 28.00 430 30.00 430 Ø 32.00 430 35.00 430 38.00 430 40.00 430 800 12.00 800 14.00 800 16.00 800 18.00 800 780 20.00 780 22.00 780 25.00 24.5 780 28.00 780 30.00 780 32.00 780 35.00 780 10 38.00 780 40.00 780 1180 20.00 1180 25.00 1180 32.00 1180

SMAX SHOT PEENED CHROME, NICKEL, MOLYBDENUM STEEL ALLOY VACUUM BRAZED CARBIDE SDS-MAX HANG TAB OAL MM 370 370 370 370 370 370 370 370 370 370 370 370 370 370 370 570 570 570 570 570 260 570 570 570 570 570 570 570 570 570 920 920 920 920 920 920 59.5920 920 920 920 920 920 920 920 920 1320 1320 1320 1320

PACK QTY 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 76

$ EACH SDS-MAX 85.97 91.43 96.69 111.52 SDS-MAX 122.23 137.56 151.17 166.32 191.69 211.26 232.54 279.07 324.78 SDS-MAX 106.07 113.56 107.44 118.34 SDS-MAX 125.90 151.32 195.50 210.01 219.03 249.18 297.86 351.82 428.34 SDS-MAX 162.07 171.77 181.14 200.89 SDS-MAX 210.92 254.85 287.19 345.93 397.69 410.99 553.27 628.69 722.67 SDS-MAX 328.56 471.06 770.49

PART NUMBER SDS-MAX 2547-12.00X370 2547-14.00X370 2547-16.00X370 2547-18.00X370 SDS-MAX 2547-20.00X370 2547-22.00X370 2547-25.00X370 2547-28.00X370 2547-30.00X370 2547-32.00X370 2547-35.00X370 2547-38.00X370 2547-40.00X370 SDS-MAX 2547-12.00X570 2547-14.00X570 2547-16.00X570 2547-18.00X570 SDS-MAX 2547-20.00X570 2547-22.00X570 2547-25.00X570 2547-28.00X570 2547-30.00X570 2547-32.00X570 2547-35.00X570 2547-38.00X570 2547-40.00X570 SDS-MAX 2547-12.00X920 2547-14.00X920 2547-16.00X920 2547-18.00X920 SDS-MAX 2547-20.00X920 2547-22.00X920 2547-25.00X920 2547-28.00X920 2547-30.00X920 2547-32.00X920 2547-35.00X920 2547-38.00X920 2547-40.00X920 SDS-MAX 2547-20.00X1320 2547-25.00X1320 2547-32.00X1320

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:28 PM

DRILLS MASONRY SDS-MAX MERCHANDISER

GROUP SURFACE FINISH MATERIAL POINT TYPE SHANK TYPE PACKAGING

MERCHANDISER TYPE MASONRY - SDS-MAX MERCHANDISER CONTENTS

SMAX SHOT PEENED CHROME, NICKEL, MOLYBDENUM STEEL ALLOY VACUUM BRAZED CARBIDE SDS-MAX HANG TAB $ MERCHANDISER 3,589.28 QTY EACH 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

PART NUMBER 2547-D1

SDS-Max

SDS-Max Suits all Rotary Hammers fitted with an SDS-Max chuck

PART NUMBER 2547-12.00X370 2547-14.00X370 2547-16.00X370 2547-18.00X370 2547-20.00X370 2547-22.00X370 2547-25.00X370 2547-28.00X370 2547-30.00X370 2547-32.00X370 2547-12.00X570 2547-16.00X570 2547-20.00X570 2547-22.00X570 2547-25.00X570 2547-28.00X570 2547-32.00X570 2547-35.00X570 2547-38.00X570 2547-40.00X570

SDS Chisels and Core Bits Bordo’s range of SDS-Plus and SDS-Max Chisels and SDS Multi-fit Core Bits. PAGE

78 & 79

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 77

WWW.BORDO.COM.AU

PAGE 077 21/04/12 6:28 PM

CHISELS MASONRY SDS HANG SELL

SDS-Plus

SDS Plus Suits all Rotary Hammers fitted with an SDS Plus chuck

GROUP SURFACE FINISH POINT-TYPE SHANK TYPE PACKAGING LENGTH

SDPC SHEET PEENED CHROME, NICKEL, MOLY STEEL ALLOY VACUUM BRAZED CARBIDE SDS-PLUS HANG TAB

SMCH SHEET PEENED CHROME, NICKEL, MOLY STEEL ALLOY VACUUM BRAZED CARBIDE SDS-MAX HANG TAB

WIDTH MM

POINT TYPE

OAL MM

PACK QTY

$ EACH

PART NUMBER

$ EACH

PART NUMBER

– – – –

POINT POINT POINT POINT

250 280 400 600

1 1 1 1

29.00 – – –

2546-PX250 – – –

– 32.92 44.14 60.97

– 2548-PX280 2548-PX400 2548-PX600

20 25 25 25 40 50 50

FLAT FLAT FLAT FLAT FLAT FLAT FLAT

250 280 400 600 250 400 600

1 1 1 1 1 1 1

41.61 – – – 45.86 – –

2546-F20X250 – – – 2546-F40X250 – –

– 43.51 45.91 64.06 – 73.88 92.19

– 2548-F25X280 2548-F25X400 2548-F25X600 – 2548-F50X400 2548-F50X600

HOLLOW

250

57.31

2546-H20X250

–

SDS-Max

SDS-Max Suits all Rotary Hammers fitted with an SDS-Max chuck

SDS-PLUS & SDS-MAX CHISELS MERCHANDISER CONTENTS

PAGE 078

$ MERCHANDISER 455.75

MERCHANDISER TYPE

QTY EACH 1 2 1 1

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 78

SDS-PLUS PART NUMBER 2546-PX250 2546-F20X250 2546-F40X250 2546-H20X250

PART NUMBER 2546-D1 QTY EACH 1 1 1 1 1

SDS-MAX PART NUMBER 2548-PX280 2548-PX400 2548-F25X280 2548-F25X400 2548-F50X400

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:28 PM

CORE BITS MASONRY SDS MULTI-FIT HANG SELL

SDS Multi-fit

with 100mm Mandrel Cutting Depth 110mm

Mandrel Length (L) 100mm

with 170mm Mandrel Cutting Depth 180mm with 220mm Mandrel Cutting Depth 230mm

Mandrel Length (L) 170mm

Mandrel Length (L) 220mm

with 320mm Mandrel Cutting Depth 330mm

Mandrel Length (L) 320mm

GROUP SURFACE FINISH MATERIAL POINT-TYPE SHANK TYPE PACKAGING

CORE SHOT PEENED CHROME, NICKEL, MOLYBDENUM STEEL ALLOY VACUUM BRAZED CARBIDE SDS-MULTI-FIT HANG PACK

DIA MM

THREAD MM X MM

TEETH NUMBER

PACK QTY

$ EACH

PART NUMBER

30.00 35.00 40.00 45.00 50.00 60.00 66.00 68.00 70.00 80.00 85.00 90.00 105.00 125.00

16.0 X 2.0 16.0 X 2.0 16.0 X 2.0 16.0 X 2.0 16.0 X 2.0 16.0 X 2.0 16.0 X 2.0 16.0 X 2.0 16.0 X 2.0 16.0 X 2.0 16.0 X 2.0 16.0 X 2.0 16.0 X 2.0 16.0 X 2.0

5 5 6 6 7 8 8 8 8 9 9 10 11 12

1 1 1 1 1 1 1 1 1 1 1 1 1 1

117.37 126.44 147.72 159.62 174.63 204.72 216.77 228.84 234.84 264.95 277.00 289.04 334.15 409.49

7082-30 7082-35 7082-40 7082-45 7082-50 7082-60 7082-66 7082-68 7082-70 7082-80 7082-85 7082-90 7082-105 7082-125

LENGTH MM

CUT DEPTH MM

PACK QTY

$ EACH

PART NUMBER

100 170 220 320

110 180 240 330

1 1 1 1

88.16 119.92 137.83 168.80

7082-4446 7082-6186 7082-7617 7082-6150

ACCESSORIES

$ EACH

PART NUMBER

CORE BIT PILOT BIT

18.79

7082-6299

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 79

WWW.BORDO.COM.AU

SDS Multi-fit Suits all Rotary Hammers fitted with an SDS Plus or Ramset R3速 chuck

FOR USE IN ROTARY HAMMERS WITH SDS CHUCK RECOMMENDED 800W MIN.

PAGE 079 21/04/12 6:28 PM

CORE BITS MASONRY HYPERDIA HANG SELL

SDS-Plus GROUP CORE BIT TYPE CUTTING MATERIAL SURFACE FINISH SHANK TYPE PACKAGING Cuts through block, mortar and various types of pipes thanks to the unique large particle diamond configuration on the cutting surfaces in conjunction with the external peripheral thread. Ideal for use in: block, mortar, brick, roof tiles, ALC (Autoclaved Light-weight Concrete block), AAC (Autoclaved Aerated Concrete) such as Hebel®, siding boards (ceramic or metal), FRP (Fibre Reinforced Plastic) pipe, PVC pipe, FRPM (Fibre Reinforced Plastic Mortar) pipe, and spiral duct pipe. By using a center pin you can drill insulated walls, hard ceramic siding board, and even composite wall! Characteristics The embedded diamonds make it easy to cut holes in block, mortar, and brick, which are traditionally difficult materials for a rotation only carbide blade. The unique diamond layout reduces jamming. Poly-clic Shanks: “S” shank with 10mm for 22-45mm diameter Hyperdia cutters. “L” shank with 13mm for 50-310mm diameter Hyperdia cutters. Use Center Pin with: s -ORTAR BLOCK TILE s %XTRUDED CEMENT panel, brick, ceramic siding, FRP s (ARD CERAMIC SIDING board s )NSULATED WALLS Use Centre Drill with: s %XTRUDED CEMENT panel, brick, ceramic siding, FRP s -ETAL SIDING BOARD s !,# s 06# &20- PIPE

DIA MM 25.00 29.00 32.00 35.00 38.00 45.00 50.00 55.00 60.00 65.00 70.00 75.00 80.00 85.00 90.00 95.00 100.00 105.00 110.00 115.00 120.00 125.00 130.00 140.00 150.00 155.00 160.00 165.00 170.00 200.00 210.00 220.00 250.00 260.00 300.00 310.00

CUT DEPTH MM 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130 130

HYPD DRY DIAMOND LARGE PARTICLE DIAMOND PERIPHERAL THREAD POLY-CLIC HANG SELL OAL MM 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160

PACK QTY 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

$ EACH 291.27 291.27 291.27 291.27 291.27 291.27 296.17 296.17 308.40 315.75 350.01 367.14 384.28 401.41 435.68 452.81 487.08 514.01 521.34 550.72 580.10 638.83 697.58 731.84 793.03 817.51 817.51 920.32 920.32 1,319.28 1,542.01 1,622.78 2,325.25 2,570.01 3,181.92 3,426.69

PART NUMBER 7105-25 7105-29 7105-32 7105-35 7105-38 7105-45 7105-50 7105-55 7105-60 7105-65 7105-70 7105-75 7105-80 7105-85 7105-90 7105-95 7105-100 7105-105 7105-110 7105-115 7105-120 7105-125 7105-130 7105-140 7105-150 7105-155 7105-160 7105-165 7105-170 7105-200 7105-210 7105-220 7105-250 7105-260 7105-300 7105-310

Large diamond

Poly-clic shanks, centre pins and carbide centre drills to suit Hyperdia diamond core bits PAGE

HEBEL® is a registered trademark of the Xella® group

PAGE 080

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 80

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:28 PM

CORE BITS MASONRY DRIMOND HANG SELL

SDS-Plus GROUP CORE BIT TYPE CUTTING MATERIAL SURFACE FINISH SHANK TYPE PACKAGING DIA MM 25.00 29.00 32.00 35.00 38.00 45.00 50.00 55.00 60.00 65.00 70.00 75.00 80.00 85.00 90.00 95.00 100.00 105.00 110.00 115.00 120.00 125.00* 130.00 150.00 155.00 160.00 165.00 170.00 180.00 200.00 210.00 220.00

CUT DEPTH MM 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150

DRMD DRY DIAMOND DIAMOND PERIPHERAL THREAD SDS POLY-CLIC HANG SELL OAL MM 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180

PACK QTY 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

$ EACH 532.37 532.37 532.37 532.37 532.37 532.37 556.84 556.84 581.32 611.91 648.62 715.93 783.24 844.44 887.26 979.06 1,040.24 1,101.43 1,162.62 1,223.82 1,285.01 1,315.60 1,315.60 1,468.58 1,621.56 1,621.56 1,682.75 1,682.75 1,808.79 2,049.90 2,172.27 2,294.65

PART NUMBER 7106-25 7106-29 7106-32 7106-35 7106-38 7106-45 7106-50 7106-55 7106-60 7106-65 7106-70 7106-75 7106-80 7106-85 7106-90 7106-95 7106-100 7106-105 7106-110 7106-115 7106-120 7106-125 7106-130 7106-150 7106-155 7106-160 7106-165 7106-170 7106-180 7106-200 7106-210 7106-220

Drimond core bits are optimally designed for dry cut drilling in reinforced concrete with re-bar below 13mm diameter. Ideal for use in: s PRE CAST AND reinforced concrete containing re-bar smaller than 13mm diameter. s !LL KINDS OF masonry pipes. Carbide tipped centre pin ensures accurate starting. Peripheral threading for efficient dust removal. Poly-clic Shanks: “S” shank with 10mm for 22-45mm diameter Drimond cutters. “L” shank with 13mm for 50-310mm diameter Drimond cutters.

Poly-clic shanks and centre pins to suit Drimond diamond core bits PAGE

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 81

WWW.BORDO.COM.AU

PAGE 081 21/04/12 6:28 PM

CORE BITS MASONRY WETMOND HANG SELL

SDS-Plus GROUP CORE BIT TYPE CUTTING MATERIAL SURFACE FINISH SHANK TYPE PACKAGING Wetmond diamond core bits feature an internal water injection system to ensure optimal cooling of the cutting surface. Ideal for use in: concrete, reinforced concrete, brick, mortar, stone, ceramic tile, marble, granite, hume and clay pipes, etc. By using a center pin you can drill insulated walls, hard ceramic siding board, and even composite wall. Poly-clic WET Shanks: “S” shank for 25-45mm diameter Wetmond cutters. “L” shank for 50-220mm diameter Wetmond cutters. IMPORTANT Poly-clic wet shanks are only suitable for use with Wetmond diamond core bits. A consistent supply of water is required when using Wetmond core bits.

SAFETY WARNING The presence of water greatly increases the risk of electric shock to the operator - ensure adequate safety precautions are being implemented.

WTMD WET DIAMOND DIAMOND SMOOTH SDS POLY-CLIC - WETMOND HANG SELL

DIA MM

CUT DEPTH MM

OAL MM

PACK QTY

$ EACH

PART NUMBER

25.00 29.00 32.00 35.00 38.00 45.00 50.00 55.00 60.00 65.00 70.00 75.00 80.00 90.00 100.00 110.00 120.00 150.00 170.00 220.00

150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150

180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

562.96 562.96 562.96 562.96 562.96 562.96 624.15 648.62 673.11 703.70 764.89 826.08 887.26 1,021.88 1,162.62 1,254.41 1,346.19 1,590.97 1,866.32 2,496.59

7107-25 7107-29 7107-32 7107-35 7107-38 7107-45 7107-50 7107-55 7107-60 7107-65 7107-70 7107-75 7107-80 7107-90 7107-100 7107-110 7107-120 7107-150 7107-170 7107-220

Poly-clic shanks & centre pins to suit Wetmond diamond core bits PAGE

PAGE 082

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 82

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:28 PM

CORE BITS MASONRY POLY-CLIC HANG SELL

SDS-Plus GROUP CORE BIT TYPE PACKAGING

POLY DIAMOND HANG SELL

Insert the cutter onto the shank

SUITS CORE BIT TYPE

Stopper locks cutter

Turn clockwise

CORE BIT SIZE MM

DRY CUTTING DIAMOND POLY-CLIC SHANK HYPERDIA AND DRIMOND 25 – 45 HYPERDIA AND DRIMOND 25 – 45 HYPERDIA AND DRIMOND 25 – 45 HYPERDIA AND DRIMOND 25 – 45 HYPERDIA AND DRIMOND 50 – 220 HYPERDIA AND DRIMOND 50 – 220 HYPERDIA AND DRIMOND 50 – 220 HYPERDIA AND DRIMOND 50 – 220 WET CUTTING DIAMOND POLY-CLIC SHANK WETMOND 25 – 45 WETMOND 25 – 45 WETMOND 25 – 45 WETMOND 25 – 45 WETMOND 50 – 220 WETMOND 50 – 220 WETMOND 50 – 220 WETMOND 50 – 220

SHANK LENGTH MM

SHANK TYPE

PACK QTY

$ EACH

PART NUMBER

80 178 80 178 100 178 100 178

STRAIGHT STRAIGHT SDS PLUS SDS PLUS STRAIGHT STRAIGHT SDS PLUS SDS PLUS

1 1 1 1 1 1 1 1

89.10 107.69 89.10 107.69 160.18 191.89 160.18 191.89

7100-S 7100-S200 7100-SSDS 7100-S200SDS 7100-L 7100-L200 7100-LSDS 7100-L200SDS

80 276 80 276 100 276 100 276

STRAIGHT STRAIGHT SDS PLUS SDS PLUS STRAIGHT STRAIGHT SDS PLUS SDS PLUS

1 1 1 1 1 1 1 1

489.52 514.01 489.52 514.01 562.96 611.91 562.96 611.91

7101-S 7101-S300 7101-SSDS 7101-S300SDS 7101-L 7101-L300 7101-LSDS 7101-L300SDS

CENTRE PINS HYPERDIA DRIMOND WETMOND

ALL ALL ALL

– – –

1 1 1

107.69 134.62 68.54

7100-CP3 7100-DCP3 7101-CP

CENTRE DRILLS HYPERDIA

ALL

–

50.91

7100-CD225

DUST COLLECTION PAD & PLATE – WET OR DRY USE HYPERDIA, DRIMOND, WETMOND ≤ 38 HYPERDIA, DRIMOND, WETMOND ≤ 80 HYPERDIA, DRIMOND, WETMOND ≤ 165 HYPERDIA, DRIMOND, WETMOND ≤ 220

– – – –

1 1 1 1

82.68 104.43 348.10 446.02

7102-38 7102-80 7102-V 7102-L

DUST COLLECTION REPLACEMENT PLATES HYPERDIA, DRIMOND, WETMOND ≤ 38 HYPERDIA, DRIMOND, WETMOND ≤ 80 HYPERDIA, DRIMOND, WETMOND ≤ 165 HYPERDIA, DRIMOND, WETMOND ≤ 220

– – – –

1 1 1 1

18.19 22.38 48.96 48.96

7102-38P 7102-80P 7102-VP 7102-LP

HOSE ADAPTOR HYPERDIA, DRIMOND, WETMOND

–

19.58

7102-ADP

–

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 83

WWW.BORDO.COM.AU

Poly-clic Shanks for Dry Diamond Cutters Two quick change shanks fit the entire range of Hyperdia and Drimond core cutters. Poly-clic Shanks for Wet Diamond Cutters An internal water injection system allows effective cooling of the cutting edge and smooth discharge of dust. Poly-clic benefits: s #OST PER HOLE IS reduced by use of interchangeable core cutters. s !UTOMATIC LOCK and manual release. s 1UICK CHANGE system allows easy slug removal. s 3HANK IS EQUIPPED with a semi-auto lock mechanism to prevent loosening of cutter in reverse mode. s 3HANK HAS A quick-change center drill/center pin.

PAGE 083 21/04/12 6:28 PM

COUNTERSINKS CROSS HOLE BULK & SETS

GROUP SURFACE FINISH MATERIAL FLUTE TYPE ANGLE PACKAGING

DIAMETER MM INCH 6.35* 10.0 15.0 20.0 25.0 30.0 40.0

1/4 – – – – – –

CSNK BRIGHT HSS-Co5 CROSS HOLE 90° SINGLE

CAPACITY MM-MAX 2–5 4-9 6 - 14 8- 18 10 - 23 12- 28 16-38

SHANK TYPE MM INCH

OAL MM

PACK QTY

$ EACH

PART NUMBER

$ EACH

PART NUMBER

6.35 6 8 10 12 12 16

45 45 55 65 78 88 132

1 1 1 1 1 1 1

31.23 32.43 40.77 60.56 95.67 115.29 369.33

3840-6.35 3840-10 3840-15 3840-20 3840-25 3840-30 3840-40

40.09 62.28 57.56 78.72 118.47 141.34 424.05

3850-6.35 3850-10 3850-15 3850-20 3850-25 3850-30 3850-40

$ SET 360.56

PART NUMBER 3840-S

$ SET 452.71

PART NUMBER 3850-S

SIZE MM

PART NUMBER

SIZE MM

PART NUMBER

10.0 15.0 20.0 25.0 30.0

3840-10 3840-15 3840-20 3840-25 3840-30

10.0 15.0 20.0 25.0 30.0

3850-10 3850-15 3850-20 3850-25 3850-30

1/4 – – – – – –

* DOUBLE ENDED

These tools are best used as deburring tools, where a burr, or sharp edge, from a previous machining operation needs to be removed for cosmetic and safety reasons. However they may be used in softer materials (such as wood or plastic) to create a countersunk hole for a screw. The intersection of the hole and cone form the cutting edge on the tool. The cone is not truly symmetrical as it is essential that the cone retreats away from the cutting edge as the tool rotates. If this does not occur the cutting edge will lack clearance and rub rather than bite into the material. This clearance is referred to as cutting relief. The radially relieved single cutting edge provide fast stock removal with low vibration for chatterfree operation ensuring the smoothest finish.

PAGE 084

CSNK GOLD COLOURED HSS-Co5 – TiN COATED CROSS HOLE 90° SINGLE

SET CROSS HOLE 90º SET CONTENTS

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 84

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:28 PM

COUNTERSINKS CROSS HOLE BULK & SET

GROUP SURFACE FINISH MATERIAL FLUTE TYPE ANGLE PACKAGING

DIAMETER MM INCH 10.0 15.0 20.0 25.0 30.0

– – – – –

CSNK BRIGHT HSS-Co5 CROSS HOLE 60° SINGLE

CAPACITY MM-MAX 5-9 8 - 14 10- 18 12 - 23 15- 28

SHANK TYPE MM INCH 6 8 10 12 12

– – – – –

OAL MM

PACK QTY

$ EACH

PART NUMBER

49 60 72 87 93

1 1 1 1 1

45.52 60.81 94.04 142.72 175.76

3841-10 3841-15 3841-20 3841-25 3841-30

COUNTERSINKS All Bordo Countersinks are made from 100% M35 cobalt high speed steel. Cobalt offers increased wear and heat resistance in alloy steels, stainless steels and other abrasive or difficult materials. This increases tool life in all production applications. Titanium Nitride (TiN) Coated Countersinks have a very hard gold coloured surface finish. This coating is only a few microns thick and is achieved by Physical Vapour Deposition (PVD). This treatment results in reduced friction, greater heat dissipation and reduced cold welding - which means higher speed and feed rates with greatly increased tool life. As with all surface coated tools, performance will deteriorate after resharpening. SINGLE FLUTE COUNTERSINKS For countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals. The fluted countersink cutter is used to provide a heavy chamfer in the entrance to a drilled hole. This may be required to allow the correct seating for a countersunk head screw or to provide the lead in for a second machining operation such as tapping. Use on light to medium materials. Resharpenable.

SET CROSS HOLE 60º SET CONTENTS

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 85

$ SET 422.63

PART NUMBER 3841-S

SIZE MM

PART NUMBER

10.0 15.0 20.0 25.0 30.0

3841-10 3841-15 3841-20 3841-25 3841-30

WWW.BORDO.COM.AU

TRIPLE FLUTE COUNTERSINKS For countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals. The three fluted countersink is self centering with wide flutes and is used to provide a heavy chamfer in the entrance to a drilled hole. This may be required to allow the correct seating for a countersunk head screw or to provide the lead in for a second machining operation such as tapping. Use on medium to hard materials. Resharpenable.

PAGE 085 21/04/12 6:28 PM

COUNTERSINKS SINGLE FLUTE BULK & SETS

GROUP SURFACE FINISH MATERIAL FLUTE TYPE ANGLE PACKAGING

DIAMETER MM INCH

CSNK BRIGHT HSS-Co5 SINGLE FLUTE 90° SINGLE

OAL MM

PACK QTY

$ EACH

PART NUMBER

$ EACH

PART NUMBER

45 55 65 78 88

1 1 1 1 1

38.04 41.89 57.30 95.67 127.33

3842-10 3842-15 3842-20 3842-25 3842-30

39.91 51.53 75.46 118.47 152.96

3852-10 3852-15 3852-20 3852-25 3852-30

SINGLE FLUTE

$ SET 364.25

PART NUMBER 3842-S

$ SET 453.63

PART NUMBER 3852-S

SET CONTENTS

SIZE MM

PART NUMBER

SIZE MM

PART NUMBER

10.0 15.0 20.0 25.0 30.0

3842-10 3842-15 3842-20 3842-25 3842-30

10.0 15.0 20.0 25.0 30.0

3852-10 3852-15 3852-20 3852-25 3852-30

10.0 15.0 20.0 25.0 30.0

– – – – –

CAPACITY MM-MAX 1 -10 2 - 15 2- 20 3 - 25 3- 30

SHANK TYPE MM INCH

CSNK GOLD COLOURED HSS-Co5 – TiN COATED SINGLE FLUTE 90° SINGLE

6 8 10 12 12

– – – – –

SINGLE FLUTE COUNTERSINKS For countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals. The fluted countersink cutter is used to provide a heavy chamfer in the entrance to a drilled hole. This may be required to allow the correct seating for a countersunk head screw or to provide the lead in for a second machining operation such as tapping. Use on light to medium materials. Resharpenable.

SET

PAGE 086

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 86

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:29 PM

COUNTERSINKS TRIPLE FLUTE BULK & SET

GROUP SURFACE FINISH MATERIAL FLUTE TYPE ANGLE PACKAGING

DIAMETER MM INCH 10.0 – 14.4 – 20.5 – 25.0 – – 28.0 – 31.0 – 35.0* – 40.0*

CSNK BRIGHT HSS-Co5 TRIPLE FLUTE 90° SINGLE

CAPACITY MM-MAX 2.2 - 10.0 2.5 - 14.4 3.0 - 20.5 3.2 - 25.0 3.5 - 28.0 3.5 - 31.0 4.5 - 35.0 4.5 - 40.0

SHANK TYPE MM INCH 6 – 8 – 10 – 10 – 12 – 12 – 16 – 16 –

OAL MM 50 56 63 67 71 71 98 111

PACK QTY 1 1 1 1 1 1 1 1

$ EACH 31.05 36.13 56.35 88.27 101.08 139.11 208.11 273.50

PART NUMBER 3843-10 3843-14.4 3843-20.5 3843-25 3843-28 3843-31 3843-35 3843-40

CSNK GOLD COLOURED HSS-Co5 – TiN COATED TRIPLE FLUTE 90° SINGLE

$ EACH 39.91 49.65 74.50 111.06 126.72 169.39 238.31 311.77

PART NUMBER 3853-10 3853-14.4 3853-20.5 3853-25 3853-28 3853-31 3853-35 3853-40

TRIPLE FLUTE COUNTERSINKS

* shanks have 3 flats for more effective holding

TRIPLE FLUTE

$ SET 378.53

PART NUMBER 3843-S

SET CONTENTS

SIZE MM

PART NUMBER

10.0 14.4 20.5 25.0 31.0

3843-10 3843-14.4 3843-20.5 3843-25 3843-31

SET

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 87

For countersinking and deburring in a wide range of materials including ferrous and nonferrous metals. The three fluted countersink is self centering with wide flutes and is used to provide a heavy chamfer in the entrance to a drilled hole. This may be required to allow the correct seating for a countersunk head screw or to provide the lead in for a second machining operation such as tapping. Use on medium to hard materials. Resharpenable.

WWW.BORDO.COM.AU

PAGE 087 21/04/12 6:29 PM

COUNTERSINKS

MERCHANDISER

PAGE 088

GROUP SURFACE FINISH MATERIAL COUNTERSINK TYPE ANGLE PACKAGING

MERCHANDISER TYPE COUNTERSINKS - PERSPEX BENCH

MERCHANDISER CONTENTS

CSNK BRIGHT HSS-Co5 CROSS HOLE / SINGLE / TRIPLE 90ยบ MERCHANDISER

$ MERCHANDISER 3,294.92

QTY EACH

SIZE MM

PART NUMBER

3 3 2 2 1 1 3 2 2 1 1 3 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

6.35 10.0 15.0 20.0 25.0 30.0 10.0 15.0 20.0 25.0 30.0 10.0 14.4 20.5 28.0 35.0 M3 M4 M5 M6 M8 M10 M12 M3 M4 M5 M6 M8 M10 M12

3840-6.35 3840-10 3840-15 3840-20 3840-25 3840-30 3842-10 3842-15 3842-20 3842-25 3842-30 3843-10 3843-14.4 3843-20.5 3843-28 3843-35 3870-3.0 3870-4.0 3870-5.0 3870-6.0 3870-8.0 3870-10.0 3870-12.0 3871-3.0 3871-4.0 3871-5.0 3871-6.0 3871-8.0 3871-10.0 3871-12.0

COUNTERSINKS - CROSS HOLE

COUNTERSINKS - SINGLE FLUTE

COUNTERSINKS - THREE FLUTE

COUNTERBORES

COUNTERBORE DRILLS

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 88

PART NUMBER 3840-D1

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:29 PM

COUNTERSINKS

MERCHANDISER

GROUP SURFACE FINISH MATERIAL COUNTERSINK TYPE ANGLE PACKAGING

MERCHANDISER TYPE COUNTERSINKS - PERSPEX BENCH

MERCHANDISER CONTENTS COUNTERSINKS - CROSS HOLE

COUNTERSINKS - SINGLE FLUTE

COUNTERSINKS - THREE FLUTE

STEP DRILLS

CSNK BRIGHT HSS-Co5 CROSS HOLE / SINGLE / TRIPLE 90ยบ MERCHANDISER

$ MERCHANDISER POA

PART NUMBER 2600-D1

QTY EACH

SIZE MM/INCH

PART NUMBER

3 3 2 2 1 1 3 2 2 1 1 3 2 2 1 1 2 1 1 2 2

6.35 10.0 15.0 20.0 25.0 30.0 10.0 15.0 20.0 25.0 30.0 10.0 14.4 20.5 28.0 35.0 4-12 4-20 6-30 1/8-1/2 1/4-3/4

3840-6.35 3840-10 3840-15 3840-20 3840-25 3840-30 3842-10 3842-15 3842-20 3842-25 3842-30 3843-10 3843-14.4 3843-20.5 3843-28 3843-35 2600-M1 2600-M2 2600-M3 2600-1 2600-2

CROSS HOLE COUNTERSINKS For countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals. The intersection of the hole and cone form the cutting edge on the tool. The cone is not truly symmetrical as it is essential that the cone retreats away from the cutting edge as the tool rotates. If this does not occur the cutting edge will lack clearance and rub rather than bite into the material. This clearance is referred to as cutting relief. The radially relieved single cutting edge provide fast stock removal with low vibration for chatterfree operation ensuring the smoothest finish. These tools are best used as deburring tools, where a burr, or sharp edge, from a previous machining operation needs to be removed for cosmetic and safety reasons, however they may be used in softer materials (such as wood or plastic) to create a countersunk hole for a screw. HSS STEP DRILLS These Bordoโ s range of step drills are ideal for electrical contractors, sheetmetal workers and auto mechanics. Step drills are designed for drilling repetitive holes in steel, stainless steel, copper, brass, aluminium, plastic, plexiglas, laminates and many other thin materials. Manufactured from premium quality high speed steel with double fluted ground cutting edge for long service life. Step Drill benefits s .O PILOT HOLE required. s %ASY TO SHARPEN s 3TEP DEPTH of 5mm. s 3TEPLESS DRILLING in the thinnest sheets. s "URR FREE DRILLING without sheet deformation. s !UTOMATIC deburring.

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 89

WWW.BORDO.COM.AU

PAGE 089 21/04/12 6:29 PM

COUNTERBORES

BULK & SETS

COUNTERBORES Use with Fillister cap screw and ejector caps in moulds.

GROUP SURFACE FINISH MATERIAL COUNTERBORE ANGLE PACKAGING

DIAMETER D d 6.0 6.5 8.0 10.0 11.0 15.0 18.0 20.0

3.2 3.7 4.3 5.3 6.4 8.4 10.5 13.0

CSNK BRIGHT HSS-Co5 180째 SINGLE

SHANK MM

OAL MM

SCREW MM

PACK QTY

$ EACH

PART NUMBER

6.0 6.5 8.0 10.0 10.0 12.5 12.5 12.5

71.0 71.0 71.0 80.0 80.0 100.0 100.0 100.0

M3.0 M3.5 M4.0 M5.0 M6.0 M8.0 M10.0 M12.0

1 1 1 1 1 1 1 1

57.59 57.59 58.22 66.45 74.99 102.84 134.47 183.21

3870-3.0 3870-3.5 3870-4.0 3870-5.0 3870-6.0 3870-8.0 3870-10.0 3870-12.0

$ SET 493.60

PART NUMBER 3870-SET

SET CONTENTS COUNTERBORE SET 3870-3.0, 3870-4.0, 3870-5.0, 3870-6.0, 3870-8.0, 3870-10.0

PAGE 090

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 90

PIECES QTY 6

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:29 PM

COUNTERBORE DRILLS BULK & SETS

GROUP SURFACE FINISH MATERIAL COUNTERBORE ANGLE PACKAGING

DIAMETER D d 6.0 8.0 10.0 11.0 15.0 18.0 20.0

3.4 4.5 5.5 6.6 9.0 11.0 14.0

Use with standard cap screws.

SHANK MM

STEP (L) MM

OAL MM

SCREW MM

PACK QTY

$ EACH

PART NUMBER

6.0 8.0 10.0 10.0 12.5 12.5 12.5

9.00 11.0 13.0 15.0 19.0 23.0 28.0

45.0 50.0 55.0 63.0 100.0 110.0 110.0

M3.0 M4.0 M5.0 M6.0 M8.0 M10.0 M12.0

1 1 1 1 1 1 1

41.45 49.05 55.05 68.98 129.09 189.06 247.43

3871-3.0 3871-4.0 3871-5.0 3871-6.0 3871-8.0 3871-10.0 3871-12.0

$ SET 531.56

PART NUMBER 3871-SET

SET CONTENTS COUNTERBORE DRILL SET 3871-3.0, 3871-4.0, 3871-5.0, 3871-6.0, 3871-8.0, 3871-10.0

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 91

COUNTERBORE DRILLS

CSNK BRIGHT HSS-Co5 180째 SINGLE

PIECES QTY 6

WWW.BORDO.COM.AU

PAGE 091 21/04/12 6:29 PM

TAPS HAND CHROME ALLOY HANG SELL

MC MF

GROUP SURFACE FINISH MATERIAL FLUTE TYPE CONTENTS PACKAGING

CTAP BRIGHT CHROME ALLOY STRAIGHT SINGLE SNAP PACK / TELESCOPIC PACK

CTAP BRIGHT CHROME ALLOY STRAIGHT 3 PCS - TAPER / INTER / BOTT SET CASE

NEW PACKAGING

METRIC COARSE & FINE Angle of thread is 60ยบ. The crest is flat and the thread has clearance at the root allowing external thread and internal thread to engage well. Larger root radius and lower thread height enable easy screw thread processing and increase thread screw strength. The major diameter of external thread and pitch are specified by a simple numerical value (most commonly measured in millimeters).

DIA PITCH MM MM METRIC COARSE 2.00 0.40 3.00 0.50 4.00 0.70 5.00 0.8 6.00 1.00 7.00 1.00 8.00 1.25 9.00 1.25 10.00 1.50 11.00 1.50 12.00 1.75 14.00 2.00 16.00 2.00 18.00 2.50 20.00 2.50 TAPER TAPS 22.00 2.50 Taper Taps have a 24.00 3.00 lead of eight threads and are used as a 27.00 3.00 starting tap in difficult 30.00 3.50 or high precision holes. Manufactured from 33.00 3.50 HSS this general 36.00 4.00 purpose tap is designed METRIC FINE for use in medium tensile materials and 8.00 1.00 is for hand or general 10.00 1.00 machine use. 10.00 1.25 12.00 1.25 INTERMEDIATE TAPS 12.00 1.50 Intermediate Taps 14.00 1.25 have a lead of four 14.00 1.50 threads and are used in most general purpose 16.00 1.50 applications to cut 18.00 1.50 a thread true to a 20.00 1.50 pre-drilled pilot hole. 22.00 1.50 24.00 2.00 BOTTOMING TAPS 25.00 1.50 Bottoming Taps have 32.00 1.50 a lead of two threads and are used to ensure SPARK PLUG minimum thread 10.00 1.00 run-out when tapping 12.00 1.25 to the bottom of a blind hole. Bottoming Taps 14.00 1.25 are typically preceded 18.00 1.50 by the use of a Taper CONDUIT or Intermediate Tap. 16.00 1.50 20.00 1.50 25.00 1.50 32.00 1.50

PAGE 092

OAL MM

DRILL MM

PACK QTY

$ EACH

TAPER PART NUMBER

INTERMEDIATE PART NUMBER

BOTTOMING PART NUMBER

$ SET

PART NUMBER

43 48 54 60 64 64 70 75 75 80 86 91 97 102 108 119 124 135 138 151 162

1.60 2.50 3.30 4.20 5.00 6.00 6.80 7.80 8.50 9.50 10.20 12.00 14.00 15.50 17.50 19.50 21.00 24.00 26.50 29.50 32.00

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

6.77 10.48 10.48 7.18 7.18 7.42 7.43 9.70 9.55 12.01 12.33 17.67 23.09 27.52 27.10 35.68 70.16 93.27 102.20 143.39 166.18

4220-2.00T 4220-3.00T 4220-4.00T 4220-5.00T 4220-6.00T 4220-7.00T 4220-8.00T 4220-9.00T 4220-10.00T 4220-11.00T 4220-12.00T 4220-14.00T 4220-16.00T 4220-18.00T 4220-20.00T 4220-22.00T 4220-24.00T 4220-27.00T 4220-30.00T 4220-33.00T 4220-36.00T

4220-2.00I 4220-3.00I 4220-4.00I 4220-5.00I 4220-6.00I 4220-7.00I 4220-8.00I 4220-9.00I 4220-10.00I 4220-11.00I 4220-12.00I 4220-14.00I 4220-16.00I 4220-18.00I 4220-20.00I 4220-22.00I 4220-24.00I 4220-27.00I 4220-30.00I 4220-33.00I 4220-36.00I

4220-2.00B 4220-3.00B 4220-4.00B 4220-5.00B 4220-6.00B 4220-7.00B 4220-8.00B 4220-9.00B 4220-10.00B 4220-11.00B 4220-12.00B 4220-14.00B 4220-16.00B 4220-18.00B 4220-20.00B 4220-22.00B 4220-24.00B 4220-27.00B 4220-30.00B 4220-33.00B 4220-36.00B

20.31 31.44 31.44 21.53 21.53 22.25 22.28 29.10 28.63 36.02 36.97 53.03 69.26 82.59 81.30 107.03 210.46 279.79 306.61 430.17 498.53

4220-2.00TS 4220-3.00TS 4220-4.00TS 4220-5.00TS 4220-6.00TS 4220-7.00TS 4220-8.00TS 4220-9.00TS 4220-10.00TS 4220-11.00TS 4220-12.00TS 4220-14.00TS 4220-16.00TS 4220-18.00TS 4220-20.00TS 4220-22.00TS 4220-24.00TS 4220-27.00TS 4220-30.00TS 4220-33.00TS 4220-36.00TS

69.00 75.00 76.00 76.00 89.00 76.00 95.00 102.00 104.00 104.00 113.00 130.00 83.00 102.00

7.00 9.00 8.80 10.80 10.50 12.80 12.50 14.50 16.50 18.50 20.50 22.00 23.50 30.50

1 1 1 1 1 1 1 1 1 1 1 1 1 1

7.42 13.39 9.55 20.17 12.33 23.98 17.67 23.09 27.52 27.52 35.36 71.37 78.83 138.49

4221-8.00T 4222-10.00T 4221-10.00T 4222-12.00T 4221-12.00T 4222-14.00T 4221-14.00T 4223-16.00T 4221-18.00T 4223-20.00T 4221-22.00T 4221-24.00T 4223-25.00T 4223-32.00T

4221-8.00I 4222-10.00I 4221-10.00I 4222-12.00I 4221-12.00I 4222-14.00I 4221-14.00I 4223-16.00I 4221-18.00I 4223-20.00I 4221-22.00I 4221-24.00I 4223-25.00I 4223-32.00I

4221-8.00B 4222-10.00B 4221-10.00B 4222-12.00B 4221-12.00B 4222-14.00B 4221-14.00B 4223-16.00B 4221-18.00B 4223-20.00B 4221-22.00B 4221-24.00B 4223-25.00B 4223-32.00B

22.25 40.18 28.63 60.49 36.97 71.97 53.03 69.26 82.59 82.59 106.11 214.12 236.45 415.49

4221-8.00TS 4222-10.00TS 4221-10.00TS 4222-12.00TS 4221-12.00TS 4222-14.00TS 4221-14.00TS 4223-16.00TS 4221-18.00TS 4223-20.00TS 4221-22.00TS 4221-24.00TS 4223-25.00TS 4223-32.00TS

75.00 9.00 76.00 10.80 76.00 12.80 104.00 16.50

1 1 1 1

13.39 20.17 23.98 27.52

4222-10.00T 4222-12.00T 4222-14.00T 4221-18.00T

4222-10.00I 4222-12.00I 4222-14.00I 4221-18.00I

4222-10.00B 4222-12.00B 4222-14.00B 4221-18.00B

40.18 60.49 71.97 82.59

4222-10.00TS 4222-12.00TS 4222-14.00TS 4221-18.00TS

102.00 104.00 83.00 102.00

1 1 1 1

23.09 27.52 78.83 138.49

4223-16.00T 4223-20.00T 4223-25.00T 4223-32.00T

4223-16.00I 4223-20.00I 4223-25.00I 4223-32.00I

4223-16.00B 4223-20.00B 4223-25.00B 4223-32.00B

69.26 82.59 236.45 415.49

4223-16.00TS 4223-20.00TS 4223-25.00TS 4223-32.00TS

14.50 18.50 23.50 30.50

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 92

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:29 PM

TAPS HAND CHROME ALLOY HANG SELL

GROUP SURFACE FINISH MATERIAL FLUTE TYPE CONTENTS PACKAGING

CTAP BRIGHT CHROME ALLOY STRAIGHT SINGLE SNAP PACK / TELESCOPIC PACK

CTAP BRIGHT CHROME ALLOY STRAIGHT 3 PCS - TAPER / INTER / BOTT SET CASE

UNC UNF

NEW PACKAGING

DIA INCH UNC 5G 6G 8G 10G 12G 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1 1-1/8 1-1/4 UNF 5G 6G 8G 10G 12G 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1 1 1-1/8 1-1/4

TPI

OAL MM

DRILL MM

PACK QTY

$ EACH

TAPER PART NUMBER

INTERMEDIATE PART NUMBER

BOTTOMING PART NUMBER

$ SET

PART NUMBER

40 32 32 24 24 24 UNS 20 18 16 14 13 12 11 10 9 8 7 7

48.00 50.00 53.00 58.00 62.00 58.00 66.00 72.00 80.00 85.00 89.00 95.00 102.00 112.00 118.00 130.00 138.00 151.00

2.65 2.85 3.50 3.90 4.50 3.70 5.10 6.60 8.00 9.40 10.80 12.20 13.50 16.50 19.50 22.25 25.00 28.00

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

11.07 11.07 9.84 7.96 7.96 7.96 7.96 7.96 8.60 10.38 12.46 20.30 19.70 25.00 40.33 43.11 82.79 100.31

4232-5GT 4232-6GT 4232-8GT 4232-10GT 4232-12GT 4232-3/16T 4232-1/4T 4232-5/16T 4232-3/8T 4232-7/16T 4232-1/2T 4232-9/16T 4232-5/8T 4232-3/4T 4232-7/8T 4232-1T 4232-1.1/8T 4232-1.1/4T

4232-5GI 4232-6GI 4232-8GI 4232-10GI 4232-12GI 4232-3/16I 4232-1/4I 4232-5/16I 4232-3/8I 4232-7/16I 4232-1/2I 4232-9/16I 4232-5/8I 4232-3/4I 4232-7/8I 4232-1I 4232-1.1/8I 4232-1.1/4I

4232-5GB 4232-6GB 4232-8GB 4232-10GB 4232-12GB 4232-3/16B 4232-1/4B 4232-5/16B 4232-3/8B 4232-7/16B 4232-1/2B 4232-9/16B 4232-5/8B 4232-3/4B 4232-7/8B 4232-1B 4232-1.1/8B 4232-1.1/4B

33.22 33.22 29.51 23.88 23.88 23.88 23.88 23.88 25.80 31.14 37.38 60.91 59.09 75.00 121.01 129.31 248.39 300.95

4232-5GTS 4232-6GTS 4232-8GTS 4232-10GTS 4232-12GTS 4232-3/16TS 4232-1/4TS 4232-5/16TS 4232-3/8TS 4232-7/16TS 4232-1/2TS 4232-9/16TS 4232-5/8TS 4232-3/4TS 4232-7/8TS 4232-1TS 4232-1.1/8TS 4232-1.1/4TS

44 40 36 32 28 32 UNS 28 24 24 20 20 18 18 16 14 12 14 UNS 12 12

48.00 50.00 53.00 58.00 62.00 62.00 66.00 69.00 76.00 82.00 84.00 90.00 95.00 104.00 113.00 120.00 120.00 127.00 137.00

2.70 2.95 3.50 4.10 4.70 4.10 5.50 6.90 8.50 9.90 11.50 12.90 14.50 17.50 20.40 23.25 23.25 26.50 29.50

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

11.07 11.07 10.03 7.96 7.96 9.06 7.96 8.92 8.92 11.51 12.64 19.86 19.56 22.94 40.18 41.54 69.58 83.10 100.31

4234-5GT 4234-6GT 4234-8GT 4234-10GT 4234-12GT 4236-3/16T 4234-1/4T 4234-5/16T 4234-3/8T 4234-7/16T 4234-1/2T 4234-9/16T 4234-5/8T 4234-3/4T 4234-7/8T 4234-1T 4236-1T 4234-1.1/8T 4234-1.1/4T

4234-5GI 4234-6GI 4234-8GI 4234-10GI 4234-12GI 4236-3/16I 4234-1/4I 4234-5/16I 4234-3/8I 4234-7/16I 4234-1/2I 4234-9/16I 4234-5/8I 4234-3/4I 4234-7/8I 4234-1I 4236-1I 4234-1.1/8I 4234-1.1/4I

4234-5GB 4234-6GB 4234-8GB 4234-10GB 4234-12GB 4236-3/16B 4234-1/4B 4234-5/16B 4234-3/8B 4234-7/16B 4234-1/2B 4234-9/16B 4234-5/8B 4234-3/4B 4234-7/8B 4234-1B 4236-1B 4234-1.1/8B 4234-1.1/4B

33.22 33.22 30.08 23.88 23.88 27.20 23.88 26.74 26.74 34.49 37.91 59.54 58.65 68.81 120.53 124.61 208.72 249.30 300.95

4234-5GTS 4234-6GTS 4234-8GTS 4234-10GTS 4234-12GTS 4236-3/16TS 4234-1/4TS 4234-5/16TS 4234-3/8TS 4234-7/16TS 4234-1/2TS 4234-9/16TS 4234-5/8TS 4234-3/4TS 4234-7/8TS 4234-1TS 4236-1TS 4234-1.1/8TS 4234-1.1/4TS

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 93

WWW.BORDO.COM.AU

UNC UNIFIED NATIONAL COARSE This thread form was introduced in 1948 as an attempt to standardise thread forms in the USA, Canada and the UK. The thread profile of UNC is the same as for metric threads and is described in the JIS B0206 standard. The thread is described by its major diameter and the number of threads per inch of length (TPI).This thread series is commonly used in the mass production of bolts, screws and nuts. It is used for threading into lower tensile strength materials (bronze, brass, aluminium and plastics) to obtain the best resistance to stripping of the internal thread. It is also used on quick assembly or disassembly or if corrosion or slight damage is possible. UNF UNIFIED NATIONAL FINE This thread form was introduced in 1948 as an attempt to standardise thread forms in the USA, Canada and the UK. The thread profile of UNF is the same as for metric threads and is described in the JIS B0206 standard. The thread is described by its major diameter and the number of threads per inch of length (TPI). When used on external threads this series has greater tensile stress area than coarse threads of the same size. Fine series threads will resist stripping out better than coarse threads in areas where the external and mating internal threads are subjected to loads equal to or greater than the capacity of the screw or bolt. Fine threads are also used where the length of engagement is limited or where wall thickness demands a fine pitch.

PAGE 093 21/04/12 6:29 PM

TAPS HAND CHROME ALLOY HANG SELL

BSW BSF

GROUP SURFACE FINISH MATERIAL FLUTE TYPE CONTENTS PACKAGING

CTAP BRIGHT CHROME ALLOY STRAIGHT SINGLE SNAP PACK / TELESCOPIC PACK

CTAP BRIGHT CHROME ALLOY STRAIGHT 3 PCS - TAPER / INTER / BOTT SET CASE

NEW PACKAGING

BSW BRITISH STANDARD WHITWORTH This thread form was developed by Sir Joseph Whitworth in 1841. The thread form has rounded roots and crests and is specified in BS84:1956. The thread angle for BSW is 55ยบ as opposed to 60ยบ in Metric and Unified threads. BSF BRITISH STANDARD FINE This thread form was based upon the British Standard Whitworth (BSW) but has a finer thread (more threads per inch for a given diameter). The thread form was first introduced in 1908 and is specified in BS84:1956. When used on external threads this series has greater tensile stress area than coarse threads of the same size. Fine series threads will resist stripping out better than coarse threads in areas where the external and mating internal threads are subjected to loads equal to or greater than the capacity of the screw or bolt. Fine threads are also used where the length of engagement is limited or where wall thickness demands a fine pitch.

DIA INCH BSW 1/8 5/32 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2 BSF 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1

TPI

OAL MM

DRILL MM

PACK QTY

$ EACH

TAPER PART NUMBER

INTERMEDIATE PART NUMBER

BOTTOMING PART NUMBER

$ SET

PART NUMBER

40 32 (WHIT) 24 20 18 16 14 12 12 11 10 9 8 7 7 6 6

48.00

2.55

8.86

4228-1/8T

4228-1/8I

4228-1/8B

26.56

4228-1/8TS

53.00

3.20

8.60

4228-5/32T

4228-5/32I

4228-5/32B

25.80

4228-5/32TS

58.00 66.00 72.00 80.00 85.00 89.00 95.00 102.00 112.00 118.00 130.00 138.00 151.00 162.00 170.00

3.70 5.10 6.50 7.90 9.30 10.50 12.10 13.50 16.25 19.25 22.00 24.75 28.00 30.25 33.50

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

6.09 6.72 7.42 8.60 10.66 12.46 20.30 19.56 22.94 37.24 41.54 82.77 102.20 151.57 186.51

4228-3/16T 4228-1/4T 4228-5/16T 4228-3/8T 4228-7/16T 4228-1/2T 4228-9/16T 4228-5/8T 4228-3/4T 4228-7/8T 4228-1T 4228-1.1/8T 4228-1.1/4T 4228-1.3/8T 4228-1.1/2T

4228-3/16I 4228-1/4I 4228-5/16I 4228-3/8I 4228-7/16I 4228-1/2I 4228-9/16I 4228-5/8I 4228-3/4I 4228-7/8I 4228-1I 4228-1.1/8I 4228-1.1/4I 4228-1.3/8I 4228-1.1/2I

4228-3/16B 4228-1/4B 4228-5/16B 4228-3/8B 4228-7/16B 4228-1/2B 4228-9/16B 4228-5/8B 4228-3/4B 4228-7/8B 4228-1B 4228-1.1/8B 4228-1.1/4B 4228-1.3/8B 4228-1.1/2B

18.26 20.17 22.25 25.80 31.97 37.38 60.91 58.65 68.81 111.70 124.61 248.32 306.61 454.73 559.56

4228-3/16TS 4228-1/4TS 4228-5/16TS 4228-3/8TS 4228-7/16TS 4228-1/2TS 4228-9/16TS 4228-5/8TS 4228-3/4TS 4228-7/8TS 4228-1TS 4228-1.1/8TS 4228-1.1/4TS 4228-1.3/8TS 4228-1.1/2TS

32 26 22 20 18 16 16 14 12 11 10

58.00 66.00 72.00 80.00 85.00 89.00 91.00 102.00 112.00 118.00 130.00

4.00 5.30 6.80 8.30 9.70 11.10 12.70 14.00 16.75 19.75 22.75

1 1 1 1 1 1 1 1 1 1 1

6.77 7.70 8.92 10.48 12.92 16.16 24.34 32.32 38.20 49.28 69.25

4230-3/16T 4230-1/4T 4230-5/16T 4230-3/8T 4230-7/16T 4230-1/2T 4230-9/16T 4230-5/8T 4230-3/4T 4230-7/8T 4230-1T

4230-3/16I 4230-1/4I 4230-5/16I 4230-3/8I 4230-7/16I 4230-1/2I 4230-9/16I 4230-5/8I 4230-3/4I 4230-7/8I 4230-1I

4230-3/16B 4230-1/4B 4230-5/16B 4230-3/8B 4230-7/16B 4230-1/2B 4230-9/16B 4230-5/8B 4230-3/4B 4230-7/8B 4230-1B

20.31 23.11 26.74 31.44 38.74 48.50 73.01 96.95 114.59 147.84 207.76

4230-3/16TS 4230-1/4TS 4230-5/16TS 4230-3/8TS 4230-7/16TS 4230-1/2TS 4230-9/16TS 4230-5/8TS 4230-3/4TS 4230-7/8TS 4230-1TS

BSP BRITISH STANDARD PIPE BSPF (G SERIES) This series is a pipe thread which is used mainly for mechanical coupling. The angle of thread is mainly 55ยบ however for the US method some threads have a 60ยบ angle. It is specified according to JIS and ISO R228.

PAGE 094

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 94

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:29 PM

TAPS HAND CHROME ALLOY HANG SELL

GROUP SURFACE FINISH MATERIAL FLUTE TYPE CONTENTS PACKAGING

CTAP BRIGHT CHROME ALLOY STRAIGHT SINGLE SNAP PACK / TELESCOPIC PACK

CTAP BRIGHT CHROME ALLOY STRAIGHT 3 PCS - TAPER / INTER / BOTT SET CASE

BSP BSPT NPT NPSF

NEW PACKAGING

DIA INCH

TPI

OAL MM

DRILL MM

BSPF (G SERIES) 1/8 28 54.00 8.80 1/4 19 62.00 11.80 3/8 19 65.00 15.25 1/2 14 79.00 19.00 5/8 14 81.00 21.00 3/4 14 83.00 24.50 1 11 96.00 30.75 1-1/4 11 102.00 39.50 1-1/2 11 108.00 45.50 2 11 115.00 57.00 BSPT (RC SERIES PIPE TAPER) 1/8 28 54.00 8.40 1/4 19 62.00 11.20 3/8 19 65.00 14.75 1/2 14 79.00 18.25 3/4 14 83.00 23.75 1 11 96.00 30.00 1-1/4 11 102.00 38.50 1-1/2 11 108.00 44.50 2 11 115.00 56.00 NPT 1/8 27 54.00 8.70 1/4 18 62.00 11.10 3/8 18 65.00 14.50 1/2 14 79.00 18.00 3/4 14 83.00 23.25 1 11.5 96.00 29.00 1-1/4 11.5 102.00 38.00 1-1/2 11.5 108.00 44.00 2 11.5 114.00 56.00 NPSF (DRYSEAL) 1/8 27 59.00 8.70 1/4 18 67.00 11.20 3/8 18 75.00 15.00 1/2 14 87.00 18.50

PACK QTY

$ EACH

TAPER PART NUMBER

INTERMEDIATE PART NUMBER

BOTTOMING PART NUMBER

$ SET

PART NUMBER

1 1 1 1 1 1 1 1 1 1

11.07 13.88 20.30 25.22 36.53 44.36 79.54 175.43 216.64 265.09

4246-1/8T 4246-1/4T 4246-3/8T 4246-1/2T 4246-5/8T 4246-3/4T 4246-1T 4246-1.1/4T 4246-1.1/2T 4246-2T

4246-1/8I 4246-1/4I 4246-3/8I 4246-1/2I 4246-5/8I 4246-3/4I 4246-1I 4246-1.1/4I 4246-1.1/2I 4246-2I

4246-1/8B 4246-1/4B 4246-3/8B 4246-1/2B 4246-5/8B 4246-3/4B 4246-1B 4246-1.1/4B 4246-1.1/2B 4246-2B

33.22 41.65 60.91 75.69 109.61 133.09 238.60 526.27 649.93 795.27

4246-1/8TS 4246-1/4TS 4246-3/8TS 4246-1/2TS 4246-5/8TS 4246-3/4TS 4246-1TS 4246-1.1/4TS 4246-1.1/2TS 4246-2TS

1 1 1 1 1 1 1 1 1

27.10 27.10 33.85 39.99 56.79 96.95 197.91 246.91 308.64

– – – – – – – – –

4248-1/8B 4248-1/4B 4248-3/8B 4248-1/2B 4248-3/4B 4248-1B 4248-1.1/4B 4248-1.1/2B 4248-2B

– – – – – – – – –

1 1 1 1 1 1 1 1 1

27.10 32.02 41.54 50.78 90.80 142.51 236.96 326.20 507.80

– – – – – – – – –

4252-1/8B 4252-1/4B 4252-3/8B 4252-1/2B 4252-3/4B 4252-1B 4252-1.1/4B 4252-1.1/2B 4252-2B

– – – – – – – – –

1 1 1 1

27.73 33.85 52.34 72.31

– – – –

4256-1/8B 4256-1/4B 4256-3/8B 4256-1/2B

– – – –

NPSF (DRYSEAL) NATIONAL PIPE STRAIGHT FUEL Another variation of the Dryseal thread is the NPSF. It is used for internal threads and an NPTF external thread can be screwed into it to provide both a satisfactory mechanical connection and hydraulic seal. A combination of a parallel and tapered thread would not appear to be ideal but it is widely used. Many quick disconnect couplers for example have the NPSF thread and are recommended by the manufacturer for use with NPT and NPTF.

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 95

WWW.BORDO.COM.AU

BSPT BRITISH STANDARD PIPE TAPER (RC SERIES PIPE TAPER) This is based on the Whitworth thread form - a symmetrical V-thread with an angle of 55º. BSPT has been widely adopted internationally for interconnecting and sealing pipe ends by mating an external (male) with an internal (female) thread. The thread diameter increases along the length of the thread allowing the coupled pipes to form a seal when torqued as the flanks of the threads compress against each other. The taper is “1 to 16”, meaning that for each 16 mm increase in the distance from the end, the diameter increases by 1 mm. NPT NATIONAL PIPE TAPERED NPT is a US standard for tapered threads used to join pipes and fittings. ANSI/ASME standard B1.20.1 covers threads of 60º form with flat crests and roots. The taper on NPT threads allows them to form a seal when torqued as the flanks of the threads compress against each other. However a clearance remains between the crests and roots of the threads, resulting in a leakage around this spiral. This means that NPT fittings must be made leak free with the aid of thread seal tape or a thread sealant compound. For each 12” increase in distance from the end, the diameter increases by 3/4”.

PAGE 095 21/04/12 6:29 PM

TAPS HAND CHROME ALLOY MERCHANDISER

GROUP SURFACE FINISH MATERIAL FLUTE TYPE CONTENTS PACKAGING

CTAP BRIGHT CHROME ALLOY STRAIGHT SINGLE SNAP PACK / TELESCOPIC PACK

NEW PACKAGING

HAND TAP MERCHANDISER

$ MERCHANDISER 697.20

PART NUMBER 4220-D1

MERCHANDISER CONTENTS

QTY EACH

SIZE MM/INCH

PART NUMBER

5 5 5 5 5 2 2 5 5 5 5 5 5 2 2 5 5 5 2 2

4.0 5.0 6.0 7.0 8.0 10.0 12.0 1/8 5/32 3/16 1/4 5/16 3/8 7/16 1/2 1/4 5/16 3/8 7/16 1/2

4220-4.00I 4220-5.00I 4220-6.00I 4220-7.00I 4220-8.00I 4220-10.00I 4220-12.00I 4228-1/8I 4228-5/32I 4228-3/16I 4228-1/4I 4228-5/16I 4228-3/8I 4228-7/16I 4228-1/2I 4234-1/4I 4234-5/16I 4234-3/8I 4234-7/16I 4234-1/2I

MERCHANDISER TYPE

METRIC COARSE

INTERMEDIATE TAPS Intermediate Taps have a lead of four threads and are used in most general purpose applications to cut a thread true to a pre-drilled pilot hole.

BSW

BOTTOMING TAPS Bottoming Taps have a lead of two threads and are used to ensure minimum thread run-out when tapping to the bottom of a blind hole. Bottoming Taps are typically preceded by the use of a Taper or Intermediate Tap.

UNF

PAGE 096

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 96

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:29 PM

TAPS HAND CHROME ALLOY MERCHANDISER

GROUP SURFACE FINISH MATERIAL LEAD TYPE FLUTE TYPE PACKAGING

CTAP BRIGHT CHROME ALLOY TAPER / INTERMEDIATE / BOTTOMING STRAIGHT BULK MERCHANDISER

MERCHANDISER TYPE BULK THREADING MERCHANDISER

TOTAL PIECES 304

$ MERCHANDISER 4,920.57

PART NUMBER 4220-D3

MERCHANDISER CONTENTS QTY TYPE EACH THREAD FORM 5 MC - TAPER 5 MC - TAPER 5 MC - TAPER 5 MC - TAPER 5 MC - TAPER 5 MC - TAPER 5 MC - TAPER 1 MC - TAPER 1 MC - TAPER 1 MC - TAPER 1 MC - TAPER 5 MC - INTER 5 MC - INTER 5 MC - INTER 5 MC - INTER 5 MC - INTER 5 MC - INTER 5 MC - INTER 1 MC - INTER 1 MC - INTER 1 MC - INTER 1 MC - INTER 5 MC - BOTT 5 MC - BOTT 5 MC - BOTT 5 MC - BOTT 5 MC - BOTT 5 MC - BOTT 5 MC - BOTT 1 MC - BOTT 1 MC - BOTT 1 MC - BOTT 1 MC - BOTT 2 2 2 2 2 2 2 1 2 2 2 2 2 2 2 1 2 2 2 2 2 2 2 1

MF - TAPER S/PLUG - TAPER MF - TAPER MF - TAPER MF - TAPER S/PLUG - TAPER MF - TAPER CONDUIT - TAPER MF - INTER S/PLUG - INTER MF - INTER MF - INTER MF - INTER S/PLUG - INTER MF - INTER CONDUIT - INTER MF - BOTT S/PLUG - BOTT MF - BOTT MF - BOTT MF - BOTT S/PLUG - BOTT MF - BOTT CONDUIT - BOTT

SIZE D X PITCH 3 X 0.5 4 X 0.7 5 X 0.8 6X1 8 X 1.25 10 X 1.5 12 X 1.75 14 X 2 16 X 2 18 X 2.5 20 X 2.5 3 X 0.5 4 X 0.7 5 X 0.8 6X1 8 X 1.25 10 X 1.5 12 X 1.75 14 X 2 16 X 2 18 X 2.5 20 X 2.5 3 X 0.5 4 X 0.7 5 X 0.8 6X1 8 X 1.25 10 X 1.5 12 X 1.75 14 X 2 16 X 2 18 X 2.5 20 X 2.5 8X1 10 X 1 10 X 1.25 12 X 1.25 12 X 1.5 14 X 1.25 14 X 1.5 25 X 1.5 8X1 10 X 1 10 X 1.25 12 X 1.25 12 X 1.5 14 X 1.25 14 X 1.5 25 X 1.5 8X1 10 X 1 10 X 1.25 12 X 1.25 12 X 1.5 14 X 1.25 14 X 1.5 25 X 1.5

PART QTY TYPE SIZE NUMBER EACH THREAD FORM D X PITCH 4220-3.00T 2 BSW - TAPER 1/2 X 12 4220-4.00T 2 BSW - INTER 1/2 X 12 4220-5.00T 2 BSW - BOTT 1/2 X 12 4220-6.00T 4220-8.00T 1 UNC - TAPER 8G X 32 4220-10.00T 1 UNC - TAPER 10G X 24 4220-12.00T 2 UNC - TAPER 3/16X24(UNS) 4220-14.00T 2 UNC - TAPER 1/4 X 20 4220-16.00T 2 UNC - TAPER 5/16 X 18 4220-18.00T 2 UNC - TAPER 3/8 X 16 4220-20.00T 1 UNC - TAPER 7/16 X 14 4220-3.00I 2 UNC - TAPER 1/2 X 13 4220-4.00I 1 UNC - TAPER 9/16 X 12 4220-5.00I 1 UNC - TAPER 5/8 X 11 4220-6.00I 1 UNC - TAPER 3/4 X 10 4220-8.00I 1 UNC - TAPER 1X8 4220-10.00I 1 UNC - INTER 8G X 32 4220-12.00I 1 UNC - INTER 10G X 24 4220-14.00I 2 UNC - INTER 3/16X24(UNS) 4220-16.00I 2 UNC - INTER 1/4 X 20 4220-18.00I 2 UNC - INTER 5/16 X 18 4220-20.00I 2 UNC - INTER 3/8 X 16 4220-3.00B 1 UNC - INTER 7/16 X 14 4220-4.00B 2 UNC - INTER 1/2 X 13 4220-5.00B 1 UNC - INTER 9/16 X 12 4220-6.00B 1 UNC - INTER 5/8 X 11 4220-8.00B 1 UNC - INTER 3/4 X 10 4220-10.00B 1 UNC - INTER 1X8 4220-12.00B 1 UNC - BOTT 8G X 32 4220-14.00B 1 UNC - BOTT 10G X 24 4220-16.00B 2 UNC - BOTT 3/16X 24(UNS) 4220-18.00B 2 UNC - BOTT 1/4 X 20 4220-20.00B 2 UNC - BOTT 5/16 X 18 2 UNC - BOTT 3/8 X 16 4221-8.00T 1 UNC - BOTT 7/16 X 14 4222-10.00T 2 UNC - BOTT 1/2 X 13 4221-10.00T 1 UNC - BOTT 9/16 X 12 4222-12.00T 1 UNC - BOTT 5/8 X 11 4221-12.00T 1 UNC - BOTT 3/4 X 10 4222-14.00T 1 UNC - BOTT 1X8 4221-14.00T 4223-25.00T 1 UNF - TAPER 8G X 36 4221-8.00I 1 UNF - TAPER 10G X 32 4222-10.00I 2 UNF - TAPER 3/16 X 32 4221-10.00I 2 UNF - TAPER 1/4 X 28 4222-12.00I 2 UNF - TAPER 5/16 X 24 4221-12.00I 2 UNF - TAPER 3/8 X 24 4222-14.00I 1 UNF - TAPER 7/16 X 20 4221-14.00I 2 UNF - TAPER 1/2 X 20 4223-25.00I 1 UNF - TAPER 9/16 X 18 4221-8.00B 1 UNF - TAPER 5/8X18 4222-10.00B 1 UNF - TAPER 3/4 X 16 4221-10.00B 1 UNF - TAPER 1 X 12 4222-12.00B 1 UNF - INTER 8G X 36 4221-12.00B 1 UNF - INTER 10G X 32 4222-14.00B 2 UNF - INTER 3/16 X 32 4221-14.00B 2 UNF - INTER 1/4X28 4223-25.00B 2 UNF - INTER 5/16X24

PART NUMBER 4228-1/2T 4228-1/2I 4228-1/2B 4232-8GT 4232-10GT 4232-3/16T 4232-1/4T 4232-5/16T 4232-3/8T 4232-7/16T 4232-1/2T 4232-9/16T 4232-5/8T 4232-3/4T 4232-1T 4232-8GI 4232-10GI 4232-3/16I 4232-1/4I 4232-5/16I 4232-3/8I 4232-7/16I 4232-1/2I 4232-9/16I 4232-5/8I 4232-3/4I 4232-1I 4232-8GB 4232-10GB 4232-3/16B 4232-1/4B 4232-5/16B 4232-3/8B 4232-7/16B 4232-1/2B 4232-9/16B 4232-5/8B 4232-3/4B 4232-1B 4234-8GT 4234-10GT 4236-3/16T 4234-1/4T 4234-5/16T 4234-3/8T 4234-7/16T 4234-1/2T 4234-9/16T 4234-5/8T 4234-3/4T 4234-1T 4234-8GI 4234-10GI 4236-3/16I 4234-1/4I 4234-5/16I

QTY TYPE EACH THREAD FORM 2 UNF - INTER 1 UNF - INTER 2 UNF - INTER 1 UNF - INTER 1 UNF - INTER 1 UNF - INTER 1 UNF - INTER 1 UNF - BOTT 1 UNF - BOTT 2 UNF - BOTT 2 UNF - BOTT 2 UNF - BOTT 2 UNF - BOTT 1 UNF - BOTT 2 UNF - BOTT 1 UNF - BOTT 1 UNF - BOTT 1 UNF - BOTT 1 UNF - BOTT

PART NUMBER 4234-3/8I 4234-7/16I 4234-1/2I 4234-9/16I 4234-5/8I 4234-3/4I 4234-1I 4234-8GB 4234-10GB 4236-3/16B 4234-1/4B 4234-5/16B 4234-3/8B 4234-7/16B 4234-1/2B 4234-9/16B 4234-5/8B 4234-3/4B 4234-1B

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

BSPF - TAPER BSPF - TAPER BSPF - TAPER BSPF - TAPER BSPF - TAPER BSPF - TAPER BSPF - INTER BSPF - INTER BSPF - INTER BSPF - INTER BSPF - INTER BSPF - INTER BSPF - BOTT BSPF - BOTT BSPF - BOTT BSPF - BOTT BSPF - BOTT BSPF - BOTT

1/8 X 28 1/4 X 19 3/8 X 19 1/2 X14 3/4 X 14 1 X 11 1/8 X 28 1/4 X 19 3/8 X 19 1/2 X 14 3/4 X 14 1 X 11 1/8 X 28 1/4 X 19 3/8 X 19 1/2 X 14 3/4 X 14 1 X 11

4246-1/8T 4246-1/4T 4246-3/8T 4246-1/2T 4246-3/4T 4246-1T 4246-1/8I 4246-1/4I 4246-3/8I 4246-1/2I 4246-3/4I 4246-1I 4246-1/8B 4246-1/4B 4246-3/8B 4246-1/2B 4246-3/4B 4246-1B

2 2 1 1 1 1

BSPT - BOTT BSPT - BOTT BSPT - BOTT BSPT - BOTT BSPT - BOTT BSPT - BOTT

1/8 X 28 1/4 X 19 3/8 X 19 1/2 X 14 3/4 X 14 1 X 11

4248-1/8B 4248-1/4B 4248-3/8B 4248-1/2B 4248-3/4B 4248-1B

2 2 1 1 1 1

NPT - BOTT NPT - BOTT NPT - BOTT NPT - BOTT NPT - BOTT NPT - BOTT

1/8 X 27 1/4 X 18 3/8 X 18 1/2 X 14 3/4 X 14 1 X 11.5

4252-1/8B 4252-1/4B 4252-3/8B 4252-1/2B 4252-3/4B 4252-1B

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 97

SIZE D X PITCH 3/8 X 24 7/16 X 20 1/2 X 20 9/16 X 18 5/8 X 18 3/4 X 16 1 X 12 8G X 36 10G X 32 3/16 X 32 1/4 X 28 5/16 X 24 3/8 X 24 7/16 X 20 1/2 X 20 9/16 X 18 5/8 X 18 3/4 X 16 1 X 12

WWW.BORDO.COM.AU

PAGE 097 21/04/12 6:29 PM

BUTTON DIES & DIE NUTS CHROME ALLOY HANG SELL

MC MF

GROUP SURFACE FINISH MATERIAL DIE TYPE PACKAGING OUTSIDE DIAMETER

DIES BRIGHT CHROME ALLOY BUTTON CLAM SHELL 1"

DIES BRIGHT CHROME ALLOY BUTTON CLAM SHELL 1- 1/2"

DIES BRIGHT CHROME ALLOY BUTTON CLAM SHELL 2"

DIES BRIGHT CHROME ALLOY NUT CLAM SHELL -

NEW PACKAGING

METRIC COARSE & FINE Angle of thread is 60º. The crest is flat and the thread has clearance at the root allowing external thread and internal thread to engage well. Larger root radius and lower thread height enable easy screw thread processing and increase thread screw strength. The major diameter of external thread and pitch are specified by a simple numerical value (most commonly measured in millimeters).

PAGE 098

DIAMETER MM METRIC COARSE 2.00 3.00 4.00 5.00 6.00 7.00 8.00 9.00 10.00 11.00 12.00 14.00 16.00 18.00 20.00 22.00 24.00 27.00 30.00 33.00 36.00 METRIC FINE 8.00 10.00 12.00 12.00 14.00 14.00 16.00 18.00 20.00 22.00 24.00 25.00 SPARK PLUG 10.00 12.00 14.00 18.00 CONDUIT 16.00 20.00 25.00

PITCH MM

PACK QTY

$ EACH

PART NUMBER

$ EACH

PART NUMBER

$ EACH

PART NUMBER

$ EACH

PART NUMBER

0.40 0.50 0.70 0.80 1.00 1.00 1.25 1.25 1.50 1.50 1.75 2.00 2.00 2.50 2.50 2.50 3.00 3.00 3.50 3.50 4.00

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

23.78 23.78 20.60 18.77 18.77 18.77 18.77 18.77 18.77 21.08 21.16 – – – – – – – – – –

4800-2-1D 4800-3-1D 4800-4-1D 4800-5-1D 4800-6-1D 4800-7-1D 4800-8-1D 4800-9-1D 4800-10-1D 4800-11-1D 4800-12-1D – – – – – – – – – –

– – 35.94 35.94 35.94 35.94 34.46 34.46 34.46 35.05 34.46 35.05 35.05 – – – – – – – –

– – 4800-4-1.5D 4800-5-1.5D 4800-6-1.5D 4800-7-1.5D 4800-8-1.5D 4800-9-1.5D 4800-10-1.5D 4800-11-1.5D 4800-12-1.5D 4800-14-1.5D 4800-16-1.5D – – – – – – – –

– – – – – – – – 44.95 – 44.95 44.95 47.41 49.83 49.83 53.85 65.24 – – – –

– – – – – – – – 4800-10-2D – 4800-12-2D 4800-14-2D 4800-16-2D 4800-18-2D 4800-20-2D 4800-22-2D 4800-24-2D – – – –

– – 23.49 24.43 24.43 24.93 24.43 24.93 35.68 – 35.68 45.86 45.86 57.87 56.64 86.16 105.26 146.18 180.03 216.95 256.99

– – 4830-4 4830-5 4830-6 4830-7 4830-8 4830-9 4830-10 – 4830-12 4830-14 4830-16 4830-18 4830-20 4830-22 4830-24 4830-27 4830-30 4830-33 4830-36

1.00 1.25 1.25 1.50 1.25 1.50 1.50 1.50 1.50 1.50 2.00 1.50

1 1 1 1 1 1 1 1 1 1 1 1

18.77 18.77 21.08 21.08 – – – – – – – –

4801-8-1D 4801-10-1D 4802-12-1D 4801-12-1D – – – – – – – –

34.46 34.46 35.05 34.46 35.05 34.46 – – – – – –

4801-8-1.5D 4801-10-1.5D 4802-12-1.5D 4801-12-1.5D 4802-14-1.5D 4801-14-1.5D – – – – – –

– – 44.95 44.95 45.53 44.95 47.41 49.83 49.83 53.85 65.24 65.99

– – 4802-12-2D 4801-12-2D 4802-14-2D 4801-14-2D 4803-16-2D 4802-18-2D 4803-20-2D 4801-22-2D 4801-24-2D 4803-25-2D

24.43 35.68 35.68 35.68 – 45.86 45.86 56.64 56.64 56.64 56.64 68.31

4831-8 4831-10 4832-12 4831-12 – 4831-14 4833-16 4832-18 4833-20 4831-22 4831-24 4833-25

1.00 1.25 1.25 1.50

1 1 1 1

18.77 21.08 – –

4802-10-1D 4802-12-1D – –

34.46 35.05 35.05 –

4802-10-1.5D 4802-12-1.5D 4802-14-1.5D –

– 44.95 45.53 49.83

– 4802-12-2D 4802-14-2D 4802-18-2D

35.68 35.68 – 56.64

4832-10 4832-12 – 4832-18

1.50 1.50 1.50

1 1 1

– – –

47.41 49.83 65.99

4803-16-2D 4803-20-2D 4803-25-2D

45.86 56.64 68.31

4833-16 4833-20 4833-25

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 98

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:30 PM

BUTTON DIES & DIE NUTS CHROME ALLOY HANG SELL

GROUP SURFACE FINISH MATERIAL DIE TYPE PACKAGING OUTSIDE DIAMETER

DIES BRIGHT CHROME ALLOY BUTTON CLAM SHELL 1"

DIES BRIGHT CHROME ALLOY BUTTON CLAM SHELL 1- 1/2"

DIES BRIGHT CHROME ALLOY BUTTON CLAM SHELL 2"

DIES BRIGHT CHROME ALLOY NUT CLAM SHELL -

UNC UNF

NEW PACKAGING

DIAMETER INCH

TPI

PACK QTY

$ EACH

PART NUMBER

$ EACH

PART NUMBER

$ EACH

PART NUMBER

$ EACH

PART NUMBER

5G 6G 8G 10G 12G 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2 1-3/4 2

40 32 32 24 24 24 UNS 20 18 16 14 13 12 11 10 9 8 7 7 6 6 5 4.5

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

23.83 23.83 23.83 23.83 23.83 23.83 19.07 19.07 19.07 21.45 22.94 – – – – – – – – – – –

4812-5G-1D 4812-6G-1D 4812-8G-1D 4812-10G-1D 4812-12G-1D 4812-3/16-1D 4812-1/4-1D 4812-5/16-1D 4812-3/8-1D 4812-7/16-1D 4812-1/2-1D – – – – – – – – – – –

– – – – – – 34.46 34.46 30.63 34.46 34.46 37.69 38.49 – – – – – – – – –

– – – – – – 4812-1/4-1.5D 4812-5/16-1.5D 4812-3/8-1.5D 4812-7/16-1.5D 4812-1/2-1.5D 4812-9/16-1.5D 4812-5/8-1.5D – – – – – – – – –

– – – – – – – – – – 44.79 48.14 47.70 49.83 53.85 64.96 – – – – – –

– – – – – – – – – – 4812-1/2-2D 4812-9/16-2D 4812-5/8-2D 4812-3/4-2D 4812-7/8-2D 4812-1-2D – – – – – –

– – – – – – 20.91 20.91 20.91 22.79 23.70 28.66 30.16 37.55 49.83 59.09 63.73 73.05 82.36 87.41 115.96 142.94

– – – – – – 4842-1/4 4842-5/16 4842-3/8 4842-7/16 4842-1/2 4842-9/16 4842-5/8 4842-3/4 4842-7/8 4842-1 4842-1.1/8 4842-1.1/4 4842-1.3/8 4842-1.1/2 4842-1.3/4 4842-2

5G 6G 8G 10G 12G 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1 1 1-1/8 1-1/4 1-3/8 1-1/2

44 40 36 32 28 32 UNS 28 24 24 20 20 18 18 16 14 12 14 UNS 12 12 12 12

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

23.83 23.83 23.83 23.83 26.03 27.52 18.77 18.77 18.77 21.16 22.46 – – – – – – – – – –

4814-5G-1D 4814-6G-1D 4814-8G-1D 4814-10G-1D 4814-12G-1D 4816-3/16-1D 4814-1/4-1D 4814-5/16-1D 4814-3/8-1D 4814-7/16-1D 4814-1/2-1D – – – – – – – – – –

– – – – – – 34.46 34.46 34.46 34.46 34.46 37.84 37.84 – – – – – – – –

– – – – – – 4814-1/4-1.5D 4814-5/16-1.5D 4814-3/8-1.5D 4814-7/16-1.5D 4814-1/2-1.5D 4814-9/16-1.5D 4814-5/8-1.5D – – – – – – – –

– – – – – – – – – – 44.95 47.41 47.41 49.83 53.85 65.24 96.63 – – – –

– – – – – – – – – – 4814-1/2-2D 4814-9/16-2D 4814-5/8-2D 4814-3/4-2D 4814-7/8-2D 4814-1-2D 4816-1-2D – – – –

– – – – – 27.48 19.07 20.91 20.91 22.94 23.70 28.03 29.98 37.55 49.83 59.09 76.63 99.11 119.41 159.43 199.46

– – – – – 4846-3/16 4844-1/4 4844-5/16 4844-3/8 4844-7/16 4844-1/2 4844-9/16 4844-5/8 4844-3/4 4844-7/8 4844-1 4846-1 4844-1.1/8 4844-1.1/4 4844-1.3/8 4844-1.1/2

UNC

UNF

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 99

WWW.BORDO.COM.AU

PAGE 099 21/04/12 6:30 PM

BUTTON DIES & DIE NUTS CHROME ALLOY HANG SELL

BSW BSF

GROUP SURFACE FINISH MATERIAL DIE TYPE PACKAGING OUTSIDE DIAMETER

DIES BRIGHT CHROME ALLOY BUTTON CLAM SHELL 1"

DIES BRIGHT CHROME ALLOY BUTTON CLAM SHELL 1- 1/2"

DIES BRIGHT CHROME ALLOY BUTTON CLAM SHELL 2"

DIES BRIGHT CHROME ALLOY NUT CLAM SHELL* -

NEW PACKAGING

BSW BRITISH STANDARD WHITWORTH This thread form was developed by Sir Joseph Whitworth in 1841. The thread form has rounded roots and crests and is specified in BS84:1956. The thread angle for BSW is 55º as opposed to 60º in Metric and Unified threads. BSF BRITISH STANDARD FINE This thread form was based upon the British Standard Whitworth (BSW) but has a finer thread (more threads per inch for a given diameter). The thread form was first introduced in 1908 and is specified in BS84:1956. When used on external threads this series has greater tensile stress area than coarse threads of the same size. Fine series threads will resist stripping out better than coarse threads in areas where the external and mating internal threads are subjected to loads equal to or greater than the capacity of the screw or bolt. Fine threads are also used where the length of engagement is limited or where wall thickness demands a fine pitch.

DIAMETER INCH

TPI

PACK QTY

$ EACH

PART NUMBER

$ EACH

PART NUMBER

$ EACH

PART NUMBER

$ EACH

PART NUMBER

1/8 5/32 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1 1-1/8 1-1/4 1-1/2 1-3/4 2

40 32 WHIT 24 20 18 16 14 12 12 11 10 9 8 7 7 6 5 4.5

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

19.60 19.87 17.66 17.66 17.66 17.66 19.87 21.36 – – – – – – – – – –

4808-1/8-1D 4808-5/32-1D 4808-3/16-1D 4808-1/4-1D 4808-5/16-1D 4808-3/8-1D 4808-7/16-1D 4808-1/2-1D – – – – – – – – – –

– – 32.32 32.32 32.32 32.32 32.32 32.13 36.03 35.36 – – – – – – – –

– – 4808-3/16-1.5D 4808-1/4-1.5D 4808-5/16-1.5D 4808-3/8-1.5D 4808-7/16-1.5D 4808-1/2-1.5D 4808-9/16-1.5D 4808-5/8-1.5D – – – – – – – –

– – – – – – – 42.17 44.63 44.79 46.46 50.48 60.30 – – – – –

– – – – – – – 4808-1/2-2D 4808-9/16-2D 4808-5/8-2D 4808-3/4-2D 4808-7/8-2D 4808-1-2D – – – – –

15.23 25.55 15.23 17.39 19.38 19.38 20.91 21.70 25.85 27.73 34.76 46.76 53.85 90.50 97.55 191.76 269.59 339.79

4838-1/8 4838-5/32 4838-3/16 4838-1/4 4838-5/16 4838-3/8 4838-7/16 4838-1/2 4838-9/16 4838-5/8 4838-3/4 4838-7/8 4838-1 4838-1.1/8 4838-1.1/4 4838-1.1/2 4838-1.3/4 4838-2

3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1

32 26 22 20 18 16 16 14 12 11 10

1 1 1 1 1 1 1 1 1 1 1

24.93 24.43 24.74 24.93 28.03 – – – – – –

4810-3/16-1D 4810-1/4-1D 4810-5/16-1D 4810-3/8-1D 4810-7/16-1D – – – – – –

– 51.72 46.16 46.16 46.16 46.16 – – – – –

– 4810-1/4-1.5D 4810-5/16-1.5D 4810-3/8-1.5D 4810-7/16-1.5D 4810-1/2-1.5D – – – – –

– – – – – 68.33 70.78 70.78 74.83 81.26 96.34

– – – – – 4810-1/2-2D 4810-9/16-2D 4810-5/8-2D 4810-3/4-2D 4810-7/8-2D 4810-1-2D

21.70 21.70 21.70 21.70 29.87 23.70 36.32 39.08 48.02 64.96 78.18

4840-3/16 4840-1/4 4840-5/16 4840-3/8 4840-7/16 4840-1/2 4840-9/16 4840-5/8 4840-3/4 4840-7/8 4840-1

BSW

BSF

* BSW sizes greater than 1-1/2” and some BSPF and BSPT sizes may be supplied in bulk single packs.

PAGE 100

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 100

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:30 PM

BUTTON DIES & DIE NUTS CHROME ALLOY HANG SELL

GROUP SURFACE FINISH MATERIAL DIE TYPE PACKAGING OUTSIDE DIAMETER

DIES BRIGHT CHROME ALLOY BUTTON CLAM SHELL 2"

DIES BRIGHT CHROME ALLOY NUT CLAM SHELL* -

BSP BSPT NPT

NEW PACKAGING

DIAMETER INCH BSPF (G SERIES) 1/8 1/4 3/8 1/2 5/8 3/4 7/8 1 BSPT 1/8 1/4 3/8 1/2 3/4 1 NPT 1/8 1/4 3/8 1/2 3/4

TPI

PACK QTY

$ EACH

PART NUMBER

$ EACH

PART NUMBER

$ EACH

PART NUMBER

$ EACH

PART NUMBER

28 19 19 14 14 14 14 11

1 1 1 1 1 1 1 1

– – – – – – – –

44.95 44.95 47.41 60.64 61.85 60.64 84.72 84.72

4818-1/8-2D 4818-1/4-2D 4818-3/8-2D 4818-1/2-2D 4818-5/8-2D 4818-3/4-2D 4818-7/8-2D 4818-1-2D

20.91 26.78 31.39 44.32 67.38 61.24 – 107.06

4848-1/8 4848-1/4 4848-3/8 4848-1/2 4848-5/8 4848-3/4 – 4848-1

28 19 19 14 14 11

1 1 1 1 1 1

– – – – – –

92.02 92.02 98.14 122.19 122.19 –

4820-1/8-2D 4820-1/4-2D 4820-3/8-2D 4820-1/2-2D 4820-3/4-2D –

30.62 45.52 49.67 84.83 128.30 171.75

4850-1/8 4850-1/4 4850-3/8 4850-1/2 4850-3/4 4850-1

27 18 18 14 14

1 1 1 1 1

– – – – –

92.02 92.02 98.14 122.19 122.19

4822-1/8-2D 4822-1/4-2D 4822-3/8-2D 4822-1/2-2D 4822-3/4-2D

– – – – –

* BSW sizes greater than 1-1/2” and some BSPF and BSPT sizes may be supplied in bulk single packs.

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 101

WWW.BORDO.COM.AU

PAGE 101 21/04/12 6:30 PM

BUTTON DIES & DIE NUTS CHROME ALLOY MERCHANDISER

GROUP SURFACE FINISH MATERIAL FLUTE TYPE CONTENTS PACKAGING

CTAP BRIGHT CHROME ALLOY STRAIGHT SINGLE SNAP PACK / TELESCOPIC PACK

NEW PACKAGING

BUTTON DIE MERCHANDISER

$ MERCHANDISER 773.76

PART NUMBER 4800-D1

MERCHANDISER CONTENTS

QTY EACH

SIZE MM/INCH

PART NUMBER

2 2 2 2 5 2 2 2 2 2 2 2 2 2 2 2 2 5 2 2

4.0 5.0 6.0 7.0 8.0 10.0 12.0 1/8 5/32 3/16 1/4 5/16 3/8 7/16 1/2 1/4 5/16 3/8 7/16 1/2

4800-4-1D 4800-5-1D 4800-6-1D 4800-7-1D 4800-8-1D 4800-10-1D 4800-12-1D 4808-1/8-1D 4808-5/32-1D 4808-3/16-1D 4808-1/4-1D 4808-5/16-1D 4808-3/8-1D 4808-7/16-1D 4808-1/2-1D 4814-1/4-1D 4814-5/16-1D 4814-3/8-1D 4814-7/16-1D 4814-1/2-1D

MERCHANDISER TYPE

METRIC COARSE

BSW

UNF

PAGE 102

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 102

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:30 PM

BUTTON DIES & HAND TAPS CHROME ALLOY SETS

GROUP SURFACE FINISH MATERIAL PACKAGING TAP TYPE DIE TYPE

TAP& DIE SET TYPE METRIC COARSE – 18 PIECES UNC – 18 PIECES UNF – 18 PIECES BSW – 18 PIECES SET CONTENTS CHROME ALLOY TAPS

CHROME ALLOY BUTTON DIES

WRENCH/HOLDER

CTAP BRIGHT CHROME ALLOY BLOW MOULDED CASE INTERMEDIATE TAPS 1" BUTTON DIES

$ SET 323.13 – – –

PART NUMBER 4220-S1 – – –

$ SET – 323.13 – –

PART NUMBER – 4232-S1 – –

$ SET – – 323.13 –

PART NUMBER – – 4234-S1 –

$ SET – – – 323.13

PART NUMBER – – – 4228-S1

SIZE MM

PART NUMBER

SIZE INCH

PART NUMBER

SIZE INCH

PART NUMBER

SIZE INCH

PART NUMBER

3.00 X 0.50 4220-3.00I 4.00 X 0.70 4220-4.00I 5.00 X 0.80 4220-5.00I 6.00 X 1.00 4220-6.00I 7.00 X 1.00 4220-7.00I 8.00 X 1.25 4220-8.00I 10.00 X 1.50 4220-10.00I 12.00 X 1.75 4220-12.00I 3.00 x 0.50 4800-3-1D 4.00 x 0.70 4800-4-1D 5.00 x 0.80 4800-5-1D 6.00 x 1.00 4800-6-1D 7.00 x 1.00 4800-7-1D 8.00 x 1.25 4800-8-1D 10.00 x 1.50 4800-10-1D 12.00 x 1.75 4800-12-1D Tap Wrench 4998-1/8-1/2 “0” Size (M3-M12) Die Holder 4999-1 1” Diameter

6G x 32 4232-6GI 8G x 32 4232-8GI 10G x 24 4232-10GI 1/4 x 20 4232-1/4I 5/16 x 18 4232-5/16I 3/8 x 16 4232-3/8I 7/16 x 14 4232-7/16I 1/2 x 13 4232-1/2I 6G x 32 4812-6G-1D 8G x 32 4812-8G-1D 10G x 24 4812-10G-1D 1/4 x 20 4812-1/4-1D 5/16 x 18 4812-5/16-1D 3/8 x 16 4812-3/8-1D 7/16 x 14 4812-7/16-1D 1/2 x 13 4812-1/2-1D Tap Wrench 4998-1/8-1/2 “0” Size (M3-M12) Die Holder 4999-1 1” Diameter

8G x 36 4234-8GI 10G x 32 4234-10GI 3/16 x 32 4236-3/16I 1/4 x 28 4234-1/4I 5/16 x 24 4234-5/16I 3/8 x 24 4234-3/8I 7/16 x 20 4234-7/16I 1/2 x 20 4234-1/2I 8G x 36 4814-8G-1D 10G x 32 4814-10G-1D 3/16 x 32 4816-3/16-1D 1/4 x 28 4814-1/4-1D 5/16 x 24 4814-5/16-1D 3/8 x 24 4814-3/8-1D 7/16 x 20 4814-7/16-1D 1/2 x 20 4814-1/2-1D Tap Wrench 4998-1/8-1/2 “0” Size (M3-M12) Die Holder 4999-1 1” Diameter

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 103

1/8 x 40 4228-1/8I 5/32 x 32 4228-5/32I 3/16 x 24 4228-3/16I 1/4 x 20 4228-1/4I 5/16 x 18 4228-5/16I 3/8 x 16 4228-3/8I 7/16 x 14 4228-7/16I 1/2 x 12 4228-1/2I 1/8 x 40 4808-1/8-1D 5/32 x 32 4808-5/32-1D 3/16 x 24 4808-3/16-1D 1/4 x 20 4808-1/4-1D 5/16 x 18 4808-5/16-1D 3/8 x 16 4808-3/8-1D 7/16 x 14 4808-7/16-1D 1/2 x 12 4808-1/2-1D Tap Wrench 4998-1/8-1/2 “0” Size (M3-M12) Die Holder 4999-1 1” Diameter

WWW.BORDO.COM.AU

PAGE 103 21/04/12 6:30 PM

TAPS HAND & MACHINE HSS HANG SELL

TAPER TAPS Taper Taps have a lead of eight threads and are used as a starting tap in difficult or high precision holes. Manufactured from HSS this general purpose tap is designed for use in medium tensile materials and is for hand or general machine use. INTERMEDIATE TAPS Intermediate Taps have a lead of four threads and are used in most general purpose applications to cut a thread true to a pre-drilled pilot hole. BOTTOMING TAPS Bottoming Taps have a lead of two threads and are used to ensure minimum thread run-out when tapping to the bottom of a blind hole. Bottoming Taps are typically preceded by the use of a Taper or Intermediate Tap.

PAGE 104

GROUP SURFACE FINISH MATERIAL FLUTE TYPE CONTENTS PACKAGING

DIA PITCH OAL DRILL MM MM MM MM METRIC COARSE 1.00 0.25 38.50 0.75 1.20 0.25 38.50 0.85 1.40 0.30 40.00 1.10 1.60 0.35 41.00 1.25 1.70 0.35 41.00 1.45 2.00 0.40 41.00 1.60 2.50 0.45 44.50 2.05 3.00 0.50 48.00 2.50 3.50 0.60 50.00 2.90 4.00 0.70 53.00 3.30 4.50 0.75 53.00 3.70 5.00 0.80 58.00 4.20 6.00 1.00 66.00 5.00 7.00 1.00 66.00 6.00 8.00 1.25 72.00 6.80 9.00 1.25 72.00 7.80 10.00 1.50 80.00 8.50 12.00 1.75 89.00 10.20 14.00 2.00 95.00 12.00 16.00 2.00 102.00 14.00 18.00 2.50 112.00 15.50 20.00 2.50 112.00 17.50 22.00 2.50 118.00 19.50 24.00 3.00 130.00 21.00 30.00 3.50 138.00 26.50 33.00 3.50 151.00 29.50 36.00 4.00 162.00 32.00 39.00 4.00 170.00 35.00 42.00 4.50 170.00 37.50 45.00 4.50 187.00 40.50 48.00 5.00 187.00 43.00 52.00 5.00 200.00 47.00 56.00 5.50 200.00 50.50 METRIC COARSE - LEFT HAND 3.00 0.50 48.00 2.50 4.00 0.70 53.00 3.30 5.00 0.80 58.00 4.20 6.00 1.00 66.00 5.00 8.00 1.25 72.00 6.80 10.00 1.50 80.00 8.50 12.00 1.75 89.00 10.20 14.00 2.00 95.00 12.00 16.00 2.00 102.00 14.00 18.00 2.50 112.00 15.50 20.00 2.50 112.00 17.50 22.00 2.50 118.00 19.50 24.00 3.00 130.00 21.00

HSTD BRIGHT HSS STRAIGHT SINGLE SNAP PACK / TELESCOPIC PACK

PACK QTY

$ EACH

TAPER PART NUMBER

INTERMEDIATE PART NUMBER

BOTTOMING PART NUMBER

$ SET

PART NUMBER

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

83.55 79.59 79.59 67.03 67.03 27.16 22.87 17.96 19.80 14.84 25.52 16.10 16.86 22.65 18.13 33.08 24.59 36.57 45.71 54.93 83.53 95.21 104.03 118.91 219.10 281.46 312.13 354.22 404.80 523.86 559.10 688.19 1,125.57

– – – – – 3020-2.00T 3020-2.50T 3020-3.00T 3020-3.50T 3020-4.00T 3020-4.50T 3020-5.00T 3020-6.00T 3020-7.00T 3020-8.00T 3020-9.00T 3020-10.00T 3020-12.00T 3020-14.00T 3020-16.00T 3020-18.00T 3020-20.00T 3020-22.00T 3020-24.00T 3020-30.00T 3020-33.00T 3020-36.00T 3020-39.00T 3020-42.00T 3020-45.00T 3020-48.00T 3020-52.00T 3020-56.00T

3020-1.00I 3020-1.20I 3020-1.40I 3020-1.60I 3020-1.80I 3020-2.00I 3020-2.50I 3020-3.00I 3020-3.50I 3020-4.00I 3020-4.50I 3020-5.00I 3020-6.00I 3020-7.00I 3020-8.00I 3020-9.00I 3020-10.00I 3020-12.00I 3020-14.00I 3020-16.00I 3020-18.00I 3020-20.00I 3020-22.00I 3020-24.00I 3020-30.00I 3020-33.00I 3020-36.00I 3020-39.00I 3020-42.00I 3020-45.00I 3020-48.00I 3020-52.00I 3020-56.00I

– – – – – 3020-2.00B 3020-2.50B 3020-3.00B 3020-3.50B 3020-4.00B 3020-4.50B 3020-5.00B 3020-6.00B 3020-7.00B 3020-8.00B 3020-9.00B 3020-10.00B 3020-12.00B 3020-14.00B 3020-16.00B 3020-18.00B 3020-20.00B 3020-22.00B 3020-24.00B 3020-30.00B 3020-33.00B 3020-36.00B 3020-39.00B 3020-42.00B 3020-45.00B 3020-48.00B 3020-52.00B 3020-56.00B

– – – – – 81.49 68.61 53.89 59.42 44.52 76.58 48.28 50.61 67.96 54.37 99.26 73.74 109.70 137.13 164.80 250.59 285.65 312.09 356.77 657.29 844.37 936.40 1,062.66 1,214.40 1,571.58 1,677.30 2,064.61 3,376.69

– – – – – 3020-2.00TS 3020-2.50TS 3020-3.00TS 3020-3.50TS 3020-4.00TS 3020-4.50TS 3020-5.00TS 3020-6.00TS 3020-7.00TS 3020-8.00TS 3020-9.00TS 3020-10.00TS 3020-12.00TS 3020-14.00TS 3020-16.00TS 3020-18.00TS 3020-20.00TS 3020-22.00TS 3020-24.00TS 3020-30.00TS 3020-33.00TS 3020-36.00TS 3020-39.00TS 3020-42.00TS 3020-45.00TS 3020-48.00TS 3020-52.00TS 3020-56.00TS

1 1 1 1 1 1 1 1 1 1 1 1 1

36.13 35.42 35.42 37.48 39.27 48.01 81.03 97.35 104.63 143.26 167.09 240.97 240.97

3080-3.00T 3080-4.00T 3080-5.00T 3080-6.00T 3080-8.00T 3080-10.00T 3080-12.00T 3080-14.00T 3080-16.00T 3080-18.00T 3080-20.00T 3080-22.00T 3080-24.00T

3080-3.00I 3080-4.00I 3080-5.00I 3080-6.00I 3080-8.00I 3080-10.00I 3080-12.00I 3080-14.00I 3080-16.00I 3080-18.00I 3080-20.00I 3080-22.00I 3080-24.00I

3080-3.00B 3080-4.00B 3080-5.00B 3080-6.00B 3080-8.00B 3080-10.00B 3080-12.00B 3080-14.00B 3080-16.00B 3080-18.00B 3080-20.00B 3080-22.00B 3080-24.00B

108.41 106.25 106.25 112.43 117.81 144.05 243.08 292.04 313.89 429.80 501.24 722.93 722.93

3080-3.00TS 3080-4.00TS 3080-5.00TS 3080-6.00TS 3080-8.00TS 3080-10.00TS 3080-12.00TS 3080-14.00TS 3080-16.00TS 3080-18.00TS 3080-20.00TS 3080-22.00TS 3080-24.00TS

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 104

HSTD BRIGHT HSS STRAIGHT 3 PCS - TAPER / INTER / BOTT SET CASE

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:31 PM

TAPS HAND & MACHINE HSS HANG SELL

GROUP SURFACE FINISH MATERIAL FLUTE TYPE CONTENTS PACKAGING

DIA PITCH OAL MM MM MM METRIC FINE 2.00 0.45 41.00 3.00 0.35 48.00 4.00 0.50 53.00 4.50 0.50 53.00 5.00 0.50 58.00 6.00 0.75 66.00 7.00 0.75 66.00 8.00 0.75 69.00 8.00 1.00 69.00 9.00 1.00 69.00 10.00 0.75 76.00 10.00 1.00 76.00 10.00 1.25 76.00 12.00 1.00 84.00 12.00 1.25 84.00 12.00 1.50 89.00 14.00 1.00 90.00 14.00 1.25 90.00 14.00 1.50 95.00 16.00 1.00 95.00 16.00 1.25 95.00 16.00 1.50 102.00 18.00 1.00 104.00 18.00 1.25 104.00 18.00 1.50 104.00 20.00 1.50 104.00 20.00 2.00 112.00 22.00 1.50 113.00 22.00 2.00 118.00 24.00 1.50 120.00 24.00 2.00 120.00 25.00 1.50 120.00 27.00 2.00 127.00 30.00 2.00 127.00 32.00 1.50 137.00 METRIC FINE - LEFT HAND 8.00 0.75 69.00 10.00 1.00 76.00 10.00 1.25 76.00 12.00 1.00 84.00 12.00 1.25 84.00 12.00 1.50 89.00 14.00 1.50 95.00 16.00 1.50 102.00 18.00 1.50 104.00 20.00 1.50 104.00 22.00 1.50 113.00

HSTD BRIGHT HSS STRAIGHT SINGLE SNAP PACK / TELESCOPIC PACK

DRILL MM

PACK QTY

$ EACH

TAPER PART NUMBER

INTERMEDIATE PART NUMBER

BOTTOMING PART NUMBER

$ SET

PART NUMBER

1.55 2.65 3.50 4.00 4.50 5.20 6.20 7.20 7.00 8.00 9.20 9.00 8.80 11.00 10.80 10.50 13.00 12.80 12.50 15.00 14.75 14.50 17.00 16.80 16.50 18.50 18.00 20.50 20.00 22.50 22.00 23.50 25.00 28.00 30.50

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

39.29 31.58 31.58 31.58 27.72 27.72 30.37 37.92 32.93 44.96 51.58 44.30 44.30 60.29 51.83 51.83 72.50 75.43 75.43 72.50 72.50 80.45 113.97 85.55 102.09 116.37 110.14 143.05 110.14 123.01 187.73 123.01 154.77 174.33 174.33

– 3021-3.00T 3021-4.00T 3021-4.50T 3021-5.00T 3021-6.00T 3021-7.00T 3024-8.00T 3021-8.00T 3021-9.00T 3024-10.00T 3022-10.00T 3021-10.00T 3024-12.00T 3022-12.00T 3021-12.00T 3024-14.00T 3022-14.00T 3021-14.00T 3021-16.00T 3024-16.00T 3023-16.00T 3021-18.00T 3024-18.00T 3022-18.00T 3023-20.00T 3021-20.00T 3021-22.00T 3024-22.00T 3024-24.00T 3021-24.00T 3023-25.00T 3021-27.00T 3021-30.00T 3021-32.00T

3021-2.00I 3021-3.00I 3021-4.00I 3021-4.50I 3021-5.00I 3021-6.00I 3021-7.00I 3024-8.00I 3021-8.00I 3021-9.00I 3024-10.00I 3022-10.00I 3021-10.00I 3024-12.00I 3022-12.00I 3021-12.00I 3024-14.00I 3022-14.00I 3021-14.00I 3021-16.00I 3024-16.00I 3023-16.00I 3021-18.00I 3024-18.00I 3022-18.00I 3023-20.00I 3021-20.00I 3021-22.00I 3024-22.00I 3024-24.00I 3021-24.00I 3023-25.00I 3021-27.00I 3021-30.00I 3021-32.00I

– 3021-3.00B 3021-4.00B 3021-4.50B 3021-5.00B 3021-6.00B 3021-7.00B 3024-8.00B 3021-8.00B 3021-9.00B 3024-10.00B 3022-10.00B 3021-10.00B 3024-12.00B 3022-12.00B 3021-12.00B 3024-14.00B 3022-14.00B 3021-14.00B 3021-16.00B 3024-16.00B 3023-16.00B 3021-18.00B 3024-18.00B 3022-18.00B 3023-20.00B 3021-20.00B 3021-22.00B 3024-22.00B 3024-24.00B 3021-24.00B 3023-25.00B 3021-27.00B 3021-30.00B 3021-32.00B

– 94.74 94.74 94.74 83.14 83.14 91.16 113.75 98.76 95.86 154.75 132.89 132.89 180.86 155.50 155.50 217.51 226.27 226.27 217.51 217.51 241.34 341.89 256.67 306.28 349.13 330.40 429.13 330.40 369.05 563.18 369.05 464.30 522.97 522.97

– 3021-3.00TS 3021-4.00TS 3021-4.50TS 3021-5.00TS 3021-6.00TS 3021-7.00TS 3024-8.00TS 3021-8.00TS 3021-9.00TS 3024-10.00TS 3022-10.00TS 3021-10.00TS 3024-12.00TS 3022-12.00TS 3021-12.00TS 3024-14.00TS 3022-14.00TS 3021-14.00TS 3021-16.00TS 3024-16.00TS 3023-16.00TS 3021-18.00TS 3024-18.00TS 3022-18.00TS 3023-20.00TS 3021-20.00TS 3021-22.00TS 3024-22.00TS 3024-24.00TS 3021-24.00TS 3023-25.00TS 3021-27.00TS 3021-30.00TS 3021-32.00TS

7.20 9.00 8.80 11.00 10.80 10.50 12.50 14.50 16.50 18.50 20.50

1 1 1 1 1 1 1 1 1 1 1

100.31 138.00 137.75 198.94 158.46 158.46 233.80 233.80 300.76 376.07 450.66

3082-8.00T 3082-10.00T 3083-10.00T 3082-12.00T 3083-12.00T 3084-12.00T 3082-14.00T 3082-16.00T 3082-18.00T 3082-20.00T 3082-22.00T

3082-8.00I 3082-10.00I 3083-10.00I 3082-12.00I 3083-12.00I 3084-12.00I 3082-14.00I 3082-16.00I 3082-18.00I 3082-20.00I 3082-22.00I

3082-8.00B 3082-10.00B 3083-10.00B 3082-12.00B 3083-12.00B 3084-12.00B 3082-14.00B 3082-16.00B 3082-18.00B 3082-20.00B 3082-22.00B

300.92 414.04 413.25 596.83 475.37 475.37 701.45 701.45 902.27 1,128.21 1,352.01

3082-8.00TS 3082-10.00TS 3083-10.00TS 3082-12.00TS 3083-12.00TS 3084-12.00TS 3082-14.00TS 3082-16.00TS 3082-18.00TS 3082-20.00TS 3082-22.00TS

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 105

HSTD BRIGHT HSS STRAIGHT 3 PCS - TAPER / INTER / BOTT SET CASE

WWW.BORDO.COM.AU

PAGE 105 21/04/12 6:31 PM

TAPS HAND & MACHINE HSS HANG SELL

SPARK CONDUIT OVERSIZE / GALVANISING

GROUP SURFACE FINISH MATERIAL FLUTE TYPE CONTENTS PACKAGING

HSTD BRIGHT HSS STRAIGHT SINGLE SNAP PACK / TELESCOPIC PACK

DIA PITCH OAL MM MM MM SPARK PLUG 10.00 1.00 76.00 12.00 1.25 84.00 14.00 1.25 90.00 18.00 1.50 104.00 CONDUIT 16.00 20.00

1.50 1.50

HSTD BRIGHT HSS STRAIGHT 3 PCS - TAPER / INTER / BOTT SET CASE

DRILL MM

PACK QTY

$ EACH

TAPER PART NUMBER

INTERMEDIATE PART NUMBER

BOTTOMING PART NUMBER

$ SET

PART NUMBER

9.00 10.80 12.80 16.50

1 1 1 1

44.30 51.83 75.43 102.09

3022-10.00T 3022-12.00T 3022-14.00T 3022-18.00T

3022-10.00I 3022-12.00I 3022-14.00I 3022-18.00I

3022-10.00B 3022-12.00B 3022-14.00B 3022-18.00B

132.89 155.50 226.27 306.28

3022-10.00TS 3022-12.00TS 3022-14.00TS 3022-18.00TS

102.00 14.50 104.00 18.50

1 1

80.45 116.37

3023-16.00T 3023-20.00T

3023-16.00I 3023-20.00I

3023-16.00B 3023-20.00B

241.34 349.13

3023-16.00TS 3023-20.00TS

1 1 1 1 1

60.29 72.50 85.55 123.01 155.59

– – – – –

3026-10.00B 3026-12.00B 3026-16.00B 3026-20.00B 3026-24.00B

– – – – –

OVERSIZE / GALVANISING 10.00+0.4 1.50 80.00 12.00+0.4 1.75 89.00 16.00+0.4 2.00 102.00 20.00+0.4 2.50 112.00 24.00+0.4 3.00 130.00

8.9 10.6 14.4 17.9 21.5

INTERMEDIATE TAPS Intermediate Taps have a lead of four threads and are used in most general purpose applications to cut a thread true to a pre-drilled pilot hole. BOTTOMING TAPS Bottoming Taps have a lead of two threads and are used to ensure minimum thread run-out when tapping to the bottom of a blind hole. Bottoming Taps are typically preceded by the use of a Taper or Intermediate Tap.

PAGE 106

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 106

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:31 PM

TAPS HAND & MACHINE HSS HANG SELL

GROUP SURFACE FINISH MATERIAL FLUTE TYPE CONTENTS PACKAGING

DIA INCH

TPI

UNC 5G 40 6G 32 8G 32 10G 24 12G 24 3/16 24 UNS 1/4 20 5/16 18 3/8 16 7/16 14 1/2 13 9/16 12 5/8 11 3/4 10 7/8 9 1 8 1-1/8 7 1-1/4 7 1-1/2 6 1-3/4 5 2 4.5 UNC - LEFT HAND 1/4 20 5/16 18 3/8 16 7/16 14 1/2 13 5/8 11 3/4 10 7/8 9 1 8

HSTD BRIGHT HSS STRAIGHT SINGLE SNAP PACK / TELESCOPIC PACK

HSTD BRIGHT HSS STRAIGHT 3 PCS - TAPER / INTER / BOTT SET CASE

OAL MM

DRILL MM

PACK QTY

$ EACH

TAPER PART NUMBER

INTERMEDIATE PART NUMBER

BOTTOMING PART NUMBER

$ SET

PART NUMBER

48.00 50.00 53.00 58.00 62.00 58.00 66.00 72.00 80.00 85.00 89.00 95.00 102.00 112.00 118.00 130.00 138.00 151.00 170.00 187.00 200.00

2.65 2.85 3.50 3.90 4.50 3.70 5.10 6.60 8.00 9.40 10.80 12.20 13.50 16.50 19.50 22.25 25.00 28.00 34.00 39.50 45.00

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

25.49 19.09 19.09 17.26 20.54 18.69 16.09 18.66 24.72 31.27 36.66 52.43 55.28 70.79 104.93 131.70 201.62 227.65 355.00 486.20 663.11

3032-5GT 3032-6GT 3032-8GT 3032-10GT 3032-12GT 3032-3/16T 3032-1/4T 3032-5/16T 3032-3/8T 3032-7/16T 3032-1/2T 3032-9/16T 3032-5/8T 3032-3/4T 3032-7/8T 3032-1T 3032-1.1/8T 3032-1.1/4T 3032-1.1/2T 3032-1.3/4T 3032-2T

3032-5GI 3032-6GI 3032-8GI 3032-10GI 3032-12GI 3032-3/16I 3032-1/4I 3032-5/16I 3032-3/8I 3032-7/16I 3032-1/2I 3032-9/16I 3032-5/8I 3032-3/4I 3032-7/8I 3032-1I 3032-1.1/8I 3032-1.1/4I 3032-1.1/2I 3032-1.3/4I 3032-2I

3032-5GB 3032-6GB 3032-8GB 3032-10GB 3032-12GB 3032-3/16B 3032-1/4B 3032-5/16B 3032-3/8B 3032-7/16B 3032-1/2B 3032-9/16B 3032-5/8B 3032-3/4B 3032-7/8B 3032-1B 3032-1.1/8B 3032-1.1/4B 3032-1.1/2B 3032-1.3/4B 3032-2B

76.48 57.28 57.28 51.77 61.59 56.09 48.25 55.98 74.17 93.82 109.94 157.29 165.83 212.36 314.76 395.09 604.86 682.96 1,065.01 1,458.58 1,989.31

3032-5GTS 3032-6GTS 3032-8GTS 3032-10GTS 3032-12GTS 3032-3/16TS 3032-1/4TS 3032-5/16TS 3032-3/8TS 3032-7/16TS 3032-1/2TS 3032-9/16TS 3032-5/8TS 3032-3/4TS 3032-7/8TS 3032-1TS 3032-1.1/8TS 3032-1.1/4TS 3032-1.1/2TS 3032-1.3/4TS 3032-2TS

66.00 72.00 80.00 85.00 89.00 102.00 112.00 118.00 130.00

5.10 6.60 8.00 9.40 10.80 13.50 16.50 19.50 22.25

1 1 1 1 1 1 1 1 1

55.35 61.43 71.36 100.78 129.82 155.10 209.80 283.47 285.20

3090-1/4T 3090-5/16T 3090-3/8T 3090-7/16T 3090-1/2T 3090-5/8T 3090-3/4T 3090-7/8T 3090-1T

3090-1/4I 3090-5/16I 3090-3/8I 3090-7/16I 3090-1/2I 3090-5/8I 3090-3/4I 3090-7/8I 3090-1I

3090-1/4B 3090-5/16B 3090-3/8B 3090-7/16B 3090-1/2B 3090-5/8B 3090-3/4B 3090-7/8B 3090-1B

166.06 184.29 214.09 302.34 389.43 465.31 629.39 850.38 855.60

3090-1/4TS 3090-5/16TS 3090-3/8TS 3090-7/16TS 3090-1/2TS 3090-5/8TS 3090-3/4TS 3090-7/8TS 3090-1TS

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 107

WWW.BORDO.COM.AU

UNC

PAGE 107 21/04/12 6:31 PM

TAPS HAND & MACHINE HSS HANG SELL

UNF UNEF

GROUP SURFACE FINISH MATERIAL FLUTE TYPE CONTENTS PACKAGING

UNF DIA UNIFIED INCH NATIONAL FINE This thread form was UNF introduced in 1948 4G as an attempt to standardise thread 5G forms in the USA, Canada and the UK. 6G The thread profile of 8G UNF is the same as for metric threads and 10G is described in the JIS 12G B0206 standard. The thread is described by 3/16 its major diameter and the number of threads 1/4 per inch of length (TPI). 5/16 When used on external threads this series 3/8 has greater tensile stress area than 7/16 coarse threads of the 1/2 same size. Fine series threads will resist 9/16 stripping out better than 5/8 coarse threads in areas where the external and 3/4 mating internal threads are subjected to loads 7/8 equal to or greater 1 than the capacity of the screw or bolt. Fine 1 threads are also used 1-1/8 where the length of engagement is limited 1-1/4 or where wall thickness demands a fine pitch. 1-1/2 UNEF UNIFIED NATIONAL EXTRA FINE UNEF is a subset of UNF in which the thread forms feature a greater number of TPI than the standard UNF series.

48 44 40 36 32 28 32 UNS 28 24 24 20 20 18 18 16 14 12 14 UNS 12 12 12 UNF - LEFT HAND 10G 32 1/4 28 5/16 24 3/8 24 7/16 20 1/2 20 5/8 18 3/4 16 7/8 14 1 12

UNS UNIFIED NATIONAL SPECIAL UNS is a variation on standard UNF and UNEF diameter and pitch combinations. UNS threads are rarely used for bolts, but UNEF rather on nuts, tapped 1/4 holes, and threaded OD’s. Most UNS 5/16 threads have more 3/8 threads per inch than the correlating UNF 1/2 or UNEF standard, therefore they are often 5/8 the strongest thread 3/4 available. Because of this they are often 1 used in applications where high stresses are encountered, such as machine tool spindles or automotive spindles.

PAGE 108

TPI

32 32 32 28 24 20 20

HSTD BRIGHT HSS STRAIGHT SINGLE SNAP PACK / TELESCOPIC PACK

HSTD BRIGHT HSS STRAIGHT 3 PCS - TAPER / INTER / BOTT SET CASE

OAL MM

DRILL MM

PACK QTY

$ EACH

TAPER PART NUMBER

INTERMEDIATE PART NUMBER

BOTTOMING PART NUMBER

$ SET

PART NUMBER

48.00 48.00 50.00 53.00 58.00 62.00 58.00 66.00 69.00 76.00 82.00 84.00 90.00 95.00 104.00 113.00 120.00 120.00 127.00 137.00 149.00

2.40 2.70 2.95 3.50 4.10 4.70 4.00 5.50 6.90 8.50 9.90 11.50 12.90 14.50 17.50 20.40 23.25 24.00 26.50 29.50 36.00

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

34.91 26.13 26.62 19.84 17.44 20.75 22.95 16.25 17.86 24.99 31.60 37.03 52.93 53.15 71.46 103.01 129.31 170.72 201.62 227.65 355.00

3034-4GT 3034-5GT 3034-6GT 3034-8GT 3034-10GT 3034-12GT 3036-3/16T 3034-1/4T 3034-5/16T 3034-3/8T 3034-7/16T 3034-1/2T 3034-9/16T 3034-5/8T 3034-3/4T 3034-7/8T 3034-1T 3036-1T 3034-1.1/8T 3034-1.1/4T 3034-1.1/2T

3034-4GI 3034-5GI 3034-6GI 3034-8GI 3034-10GI 3034-12GI 3036-3/16I 3034-1/4I 3034-5/16I 3034-3/8I 3034-7/16I 3034-1/2I 3034-9/16I 3034-5/8I 3034-3/4I 3034-7/8I 3034-1I 3036-1I 3034-1.1/8I 3034-1.1/4I 3034-1.1/2I

3034-4GB 3034-5GB 3034-6GB 3034-8GB 3034-10GB 3034-12GB 3036-3/16B 3034-1/4B 3034-5/16B 3034-3/8B 3034-7/16B 3034-1/2B 3034-9/16B 3034-5/8B 3034-3/4B 3034-7/8B 3034-1B 3036-1B 3034-1.1/8B 3034-1.1/4B 3034-1.1/2B

104.70 78.39 79.86 59.49 52.32 62.25 68.86 48.77 53.58 74.96 94.82 111.11 158.80 159.45 214.39 309.05 387.92 512.17 604.86 682.96 1,065.01

3034-4GTS 3034-5GTS 3034-6GTS 3034-8GTS 3034-10GTS 3034-12GTS 3036-3/16TS 3034-1/4TS 3034-5/16TS 3034-3/8TS 3034-7/16TS 3034-1/2TS 3034-9/16TS 3034-5/8TS 3034-3/4TS 3034-7/8TS 3034-1TS 3036-1TS 3034-1.1/8TS 3034-1.1/4TS 3034-1.1/2TS

58.00 66.00 69.00 76.00 82.00 84.00 95.00 104.00 113.00 120.00

4.10 5.50 6.90 8.50 9.90 11.50 14.50 17.50 20.40 23.25

1 1 1 1 1 1 1 1 1 1

37.40 55.35 61.43 71.36 100.78 129.82 155.10 229.27 293.71 335.62

3092-10GT 3092-1/4T 3092-5/16T 3092-3/8T 3092-7/16T 3092-1/2T 3092-5/8T 3092-3/4T 3092-7/8T 3092-1T

3092-10GI 3092-1/4I 3092-5/16I 3092-3/8I 3092-7/16I 3092-1/2I 3092-5/8I 3092-3/4I 3092-7/8I 3092-1I

3092-10GB 3092-1/4B 3092-5/16B 3092-3/8B 3092-7/16B 3092-1/2B 3092-5/8B 3092-3/4B 3092-7/8B 3092-1B

112.20 166.06 184.29 214.09 302.34 389.43 465.31 687.78 881.14 1,006.84

3092-10GTS 3092-1/4TS 3092-5/16TS 3092-3/8TS 3092-7/16TS 3092-1/2TS 3092-5/8TS 3092-3/4TS 3092-7/8TS 3092-1TS

66.00 69.00 76.00 84.00 95.00 104.00 120.00

5.60 7.20 8.80 11.80 14.75 18.00 24.20

1 1 1 1 1 1 1

49.23 54.14 54.14 62.40 75.04 88.55 127.33

– – – – – – –

3038-1/4B 3038-5/16B 3038-3/8B 3038-1/2B 3038-5/8B 3038-3/4B 3038-1B

– – – – – – –

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 108

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:31 PM

TAPS HAND & MACHINE HSS HANG SELL

GROUP SURFACE FINISH MATERIAL FLUTE TYPE CONTENTS PACKAGING

DIA INCH

TPI

BSW 1/16 60 3/32 48 WHIT 1/8 40 5/32 32 WHIT 3/16 24 7/32 24 WHIT 1/4 20 5/16 18 3/8 16 7/16 14 1/2 12 9/16 12 5/8 11 3/4 10 7/8 9 1 8 1-1/8 7 1-1/4 7 1-3/8 6 1-1/2 6 1-3/4 5 2 4.5 BSW - LEFT HAND 1/4 20 5/16 18 3/8 16 7/16 14 1/2 12 9/16 12 5/8 11 3/4 10 7/8 9 1 8

HSTD BRIGHT HSS STRAIGHT SINGLE SNAP PACK / TELESCOPIC PACK

HSTD BRIGHT HSS STRAIGHT 3 PCS - TAPER / INTER / BOTT SET CASE

OAL MM

DRILL MM

PACK QTY

$ EACH

TAPER PART NUMBER

INTERMEDIATE PART NUMBER

BOTTOMING PART NUMBER

$ SET

PART NUMBER

41.00 44.50 48.00 53.00 58.00 62.00 66.00 72.00 80.00 85.00 89.00 95.00 102.00 112.00 118.00 130.00 138.00 151.00 162.00 170.00 187.00 200.00

1.20 1.85 2.55 3.20 3.70 4.50 5.10 6.50 7.90 9.30 10.50 12.10 13.50 16.25 19.25 22.00 24.75 28.00 30.25 33.50 39.00 44.50

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

80.99 63.52 27.75 27.75 17.13 24.09 17.13 19.44 25.56 33.01 38.13 55.72 57.97 74.00 104.29 131.15 203.13 230.70 295.61 387.56 531.01 687.13

– 3028-3/32T 3028-1/8T 3028-5/32T 3028-3/16T 3028-7/32T 3028-1/4T 3028-5/16T 3028-3/8T 3028-7/16T 3028-1/2T 3028-9/16T 3028-5/8T 3028-3/4T 3028-7/8T 3028-1T 3028-1.1/8T 3028-1.1/4T 3028-1.3/8T 3028-1.1/2T 3028-1.3/4T 3028-2T

3028-1/16I 3028-3/32I 3028-1/8I 3028-5/32I 3028-3/16I 3028-7/32I 3028-1/4I 3028-5/16I 3028-3/8I 3028-7/16I 3028-1/2I 3028-9/16I 3028-5/8I 3028-3/4I 3028-7/8I 3028-1I 3028-1.1/8I 3028-1.1/4I 3028-1.3/8I 3028-1.1/2I 3028-1.3/4I 3028-2I

– 3028-3/32B 3028-1/8B 3028-5/32B 3028-3/16B 3028-7/32B 3028-1/4B 3028-5/16B 3028-3/8B 3028-7/16B 3028-1/2B 3028-9/16B 3028-5/8B 3028-3/4B 3028-7/8B 3028-1B 3028-1.1/8B 3028-1.1/4B 3028-1.3/8B 3028-1.1/2B 3028-1.3/4B 3028-2B

– 190.54 83.23 83.23 51.41 72.30 51.41 58.30 76.69 99.03 114.41 167.16 173.93 221.99 312.86 393.46 609.38 692.08 886.84 1,162.67 1,593.00 2,061.38

– 3028-3/32TS 3028-1/8TS 3028-5/32TS 3028-3/16TS 3028-7/32TS 3028-1/4TS 3028-5/16TS 3028-3/8TS 3028-7/16TS 3028-1/2TS 3028-9/16TS 3028-5/8TS 3028-3/4TS 3028-7/8TS 3028-1TS 3028-1.1/8TS 3028-1.1/4TS 3028-1.3/8TS 3028-1.1/2TS 3028-1.3/4TS 3028-2TS

66.00 72.00 80.00 85.00 89.00 95.00 102.00 112.00 118.00 130.00

5.10 6.50 7.90 9.30 10.50 12.10 13.50 16.25 19.25 22.00

1 1 1 1 1 1 1 1 1 1

46.28 52.31 52.31 60.29 91.34 143.28 139.13 157.63 208.38 272.56

3086-1/4T 3086-5/16T 3086-3/8T 3086-7/16T 3086-1/2T 3086-9/16T 3086-5/8T 3086-3/4T 3086-7/8T 3086-1T

3086-1/4I 3086-5/16I 3086-3/8I 3086-7/16I 3086-1/2I 3086-9/16I 3086-5/8I 3086-3/4I 3086-7/8I 3086-1I

3086-1/4B 3086-5/16B 3086-3/8B 3086-7/16B 3086-1/2B 3086-9/16B 3086-5/8B 3086-3/4B 3086-7/8B 3086-1B

138.81 156.94 156.94 180.86 273.99 429.88 417.39 472.89 625.14 817.71

3086-1/4TS 3086-5/16TS 3086-3/8TS 3086-7/16TS 3086-1/2TS 3086-9/16TS 3086-5/8TS 3086-3/4TS 3086-7/8TS 3086-1TS

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 109

WWW.BORDO.COM.AU

BSW

PAGE 109 21/04/12 6:31 PM

TAPS HAND & MACHINE HSS HANG SELL

BSF BRASS BA

BSF BRITISH STANDARD FINE This thread form was based upon the British Standard Whitworth (BSW) but has a finer thread (more threads per inch for a given diameter). The thread form was first introduced in 1908 and is specified in BS84:1956. When used on external threads this series has greater tensile stress area than coarse threads of the same size. Fine series threads will resist stripping out better than coarse threads in areas where the external and mating internal threads are subjected to loads equal to or greater than the capacity of the screw or bolt. Fine threads are also used where the length of engagement is limited or where wall thickness demands a fine pitch. BA BRITISH ASSOCIATION In 1884 the British Association for the Advancement of Science adopted a thread form and series, primarily for use in precision equipment. It was inspired by one used in the Swiss watch and clock industry, and was formerly sometimes called the Swiss Small Screw Thread System; but is now just referred to as the BA series. Like the Whitworth thread, it has a rounded root and crest, but the included angle is 47.5째. Despite the date of origin and the British sponsorship, the BA is a metric series. Not only is it based on the metre, but the thread frequency is specified in terms of round numbers in the pitch sequence, with threads per metre allowed to fall where it may.

PAGE 110

GROUP SURFACE FINISH MATERIAL FLUTE TYPE CONTENTS PACKAGING

DIA INCH

TPI

HSTD BRIGHT HSS STRAIGHT SINGLE SNAP PACK / TELESCOPIC PACK

HSTD BRIGHT HSS STRAIGHT 3 PCS - TAPER / INTER / BOTT SET CASE

OAL MM

DRILL MM

PACK QTY

$ EACH

TAPER PART NUMBER

INTERMEDIATE PART NUMBER

BOTTOMING PART NUMBER

$ SET

PART NUMBER

BSF 3/16 32 1/4 26 5/16 22 3/8 20 7/16 18 1/2 16 5/8 14 3/4 12 7/8 11 1 10 BSF - LEFT HAND 1/4 26 5/16 22 3/8 20 7/16 18 1/2 16 5/8 14 3/4 12 7/8 11 1 10 1 8

58.00 66.00 72.00 80.00 85.00 89.00 102.00 112.00 118.00 130.00

4.00 5.30 6.80 8.30 9.70 11.10 14.00 16.75 19.75 22.75

1 1 1 1 1 1 1 1 1 1

20.27 21.58 24.34 33.03 41.57 47.71 64.66 94.54 127.35 164.24

3030-3/16T 3030-1/4T 3030-5/16T 3030-3/8T 3030-7/16T 3030-1/2T 3030-5/8T 3030-3/4T 3030-7/8T 3030-1T

3030-3/16I 3030-1/4I 3030-5/16I 3030-3/8I 3030-7/16I 3030-1/2I 3030-5/8I 3030-3/4I 3030-7/8I 3030-1I

3030-3/16B 3030-1/4B 3030-5/16B 3030-3/8B 3030-7/16B 3030-1/2B 3030-5/8B 3030-3/4B 3030-7/8B 3030-1B

60.80 64.71 73.01 99.11 124.70 143.14 193.98 283.64 382.05 492.74

3030-3/16TS 3030-1/4TS 3030-5/16TS 3030-3/8TS 3030-7/16TS 3030-1/2TS 3030-5/8TS 3030-3/4TS 3030-7/8TS 3030-1TS

66.00 72.00 80.00 85.00 89.00 102.00 112.00 118.00 130.00 130.00

5.30 6.80 8.30 9.70 11.10 14.00 16.75 19.75 22.75 22.00

1 1 1 1 1 1 1 1 1 1

60.35 66.77 82.74 88.72 133.67 149.45 209.40 279.74 285.20 272.56

3088-1/4T 3088-5/16T 3088-3/8T 3088-7/16T 3088-1/2T 3088-5/8T 3088-3/4T 3088-7/8T 3088-1T 3086-1T

3088-1/4I 3088-5/16I 3088-3/8I 3088-7/16I 3088-1/2I 3088-5/8I 3088-3/4I 3088-7/8I 3088-1I 3086-1I

3088-1/4B 3088-5/16B 3088-3/8B 3088-7/16B 3088-1/2B 3088-5/8B 3088-3/4B 3088-7/8B 3088-1B 3086-1B

181.02 200.35 248.23 266.15 401.03 448.34 628.19 839.21 855.60 817.71

3088-1/4TS 3088-5/16TS 3088-3/8TS 3088-7/16TS 3088-1/2TS 3088-5/8TS 3088-3/4TS 3088-7/8TS 3088-1TS 3086-1TS

BRASS 1/4 5/16 3/8 7/16 1/2

26 26 26 26 26

66.00 72.00 80.00 85.00 89.00

5.30 6.90 8.50 10.20 11.80

1 1 1 1 1

21.97 40.47 40.47 60.65 72.33

3060-1/4T 3060-5/16T 3060-3/8T 3060-7/16T 3060-1/2T

3060-1/4I 3060-5/16I 3060-3/8I 3060-7/16I 3060-1/2I

3060-1/4B 3060-5/16B 3060-3/8B 3060-7/16B 3060-1/2B

65.89 121.40 121.40 181.92 216.98

3060-1/4TS 3060-5/16TS 3060-3/8TS 3060-7/16TS 3060-1/2TS

PITCH 0.35 0.39 0.43 0.48 0.53 0.59 0.66 0.73 0.81 0.9 1.00

41.00 41.00 44.50 44.50 44.50 48.00 50.00 53.00 58.00 62.00 66.00

1.40 1.55 1.80 2.05 2.30 2.65 3.00 3.40 4.00 4.50 5.10

1 1 1 1 1 1 1 1 1 1 1

61.74 58.66 32.09 33.38 21.91 20.20 19.44 21.67 19.44 21.91 20.90

3044-10T 3044-9T 3044-8T 3044-7T 3044-6T 3044-5T 3044-4T 3044-3T 3044-2T 3044-1T 3044-0T

3044-10I 3044-9I 3044-8I 3044-7I 3044-6I 3044-5I 3044-4I 3044-3I 3044-2I 3044-1I 3044-0I

3044-10B 3044-9B 3044-8B 3044-7B 3044-6B 3044-5B 3044-4B 3044-3B 3044-2B 3044-1B 3044-0B

185.22 175.94 96.27 100.16 65.72 60.63 58.31 64.99 58.31 65.72 62.73

3044-10TS 3044-9TS 3044-8TS 3044-7TS 3044-6TS 3044-5TS 3044-4TS 3044-3TS 3044-2TS 3044-1TS 3044-0TS

BA 10 9 8 7 6 5 4 3 2 1 0

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 110

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:31 PM

TAPS HAND & MACHINE HSS HANG SELL

GROUP SURFACE FINISH MATERIAL FLUTE TYPE CONTENTS PACKAGING

DIA INCH

TPI

HSTD BRIGHT HSS STRAIGHT SINGLE SNAP PACK / TELESCOPIC PACK

HSTD BRIGHT HSS STRAIGHT 3 PCS - TAPER / INTER / BOTT SET CASE

OAL MM

DRILL MM

PACK QTY

$ EACH

TAPER PART NUMBER

INTERMEDIATE PART NUMBER

BOTTOMING PART NUMBER

$ SET

PART NUMBER

BSPF (G SERIES) 1/8 28 1/4 19 3/8 19 1/2 14 5/8 14 3/4 14 7/8 14 1 11 1-1/4 11 1-1/2 11 1-3/4 11 2 11 2-1/4 11 2-1/2 11 3 11

59.00 67.00 75.00 87.00 91.00 96.00 102.00 109.00 119.00 125.00 132.00 140.00 142.00 153.00 164.00

8.80 11.80 15.25 19.00 21.00 24.50 28.25 30.75 39.50 45.50 51.00 57.00 62.70 72.10 84.80

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

29.19 42.56 59.60 84.78 112.91 119.94 184.77 201.53 301.98 373.66 595.38 638.06 1,002.94 1,341.01 2,092.92

3046-1/8T 3046-1/4T 3046-3/8T 3046-1/2T 3046-5/8T 3046-3/4T 3046-7/8T 3046-1T 3046-1.1/4T 3046-1.1/2T 3046-1.3/4T 3046-2T 3046-2.1/4T 3046-2.1/2T 3046-3T

3046-1/8I 3046-1/4I 3046-3/8I 3046-1/2I 3046-5/8I 3046-3/4I 3046-7/8I 3046-1I 3046-1.1/4I 3046-1.1/2I 3046-1.3/4I 3046-2I 3046-2.1/4I 3046-2.1/2I 3046-3I

3046-1/8B 3046-1/4B 3046-3/8B 3046-1/2B 3046-5/8B 3046-3/4B 3046-7/8B 3046-1B 3046-1.1/4B 3046-1.1/2B 3046-1.3/4B 3046-2B 3046-2.1/4B 3046-2.1/2B 3046-3B

87.56 127.67 178.78 254.34 338.74 359.80 554.28 604.60 905.91 1,120.99 1,786.13 1,914.17 3,008.81 4,023.03 6,278.75

3046-1/8TS 3046-1/4TS 3046-3/8TS 3046-1/2TS 3046-5/8TS 3046-3/4TS 3046-7/8TS 3046-1TS 3046-1.1/4TS 3046-1.1/2TS 3046-1.3/4TS 3046-2TS 3046-2.1/4TS 3046-2.1/2TS 3046-3TS

BSPT 1/8 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2

59.00 67.00 75.00 87.00 96.00 109.00 119.00 125.00 140.00

8.00 11.20 14.75 18.25 23.75 30.00 38.50 44.50 56.00

1 1 1 1 1 1 1 1 1

54.90 75.11 101.25 125.62 168.22 232.21 341.35 418.27 799.67

– – – – – – – – –

3048-1/8B 3048-1/4B 3048-3/8B 3048-1/2B 3048-3/4B 3048-1B 3048-1.1/4B 3048-1.1/2B 3048-2B

– – – – – – – – –

28 19 19 14 14 11 11 11 11

BSPF BSPT

BSP BRITISH STANDARD PIPE BSPF (G SERIES) This series is a pipe thread which is used mainly for mechanical coupling. The angle of thread is mainly 55º however for the US method some threads have a 60º angle. It is specified according to JIS and ISO R228. BSPT BRITISH STANDARD PIPE TAPER (RC SERIES PIPE TAPER) This is based on the Whitworth thread form - a symmetrical V-thread with an angle of 55º. BSPT has been widely adopted internationally for interconnecting and sealing pipe ends by mating an external (male) with an internal (female) thread. The thread diameter increases along the length of the thread allowing the coupled pipes to form a seal when torqued as the flanks of the threads compress against each other. The taper is “1 to 16”, meaning that for each 16 mm increase in the distance from the end, the diameter increases by 1 mm. BRASS (BSB) BRITISH STANDARD BRASS Brass tubing has a uniform wall thickness, irrespective of the tube diameter, therefore any thread cut on, or in, it needs to have the same depth, so 26 TPI is standard on all BSB diameters. BSB is often confused with BS Cycle thread, the difference being that brass thread has an angle of 55º whereas Cycle is 60º.

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 111

WWW.BORDO.COM.AU

PAGE 111 21/04/12 6:31 PM

TAPS HAND & MACHINE HSS HANG SELL

NPT NPTF NPSF

NPT NATIONAL PIPE TAPERED NPT is a US standard for tapered threads used to join pipes and fittings. ANSI/ASME standard B1.20.1 covers threads of 60-degree form with flat crests and roots. The taper on NPT threads allows them to form a seal when torqued as the flanks of the threads compress against each other. However a clearance remains between the crests and roots of the threads, resulting in a leakage around this spiral. This means that NPT fittings must be made leak free with the aid of thread seal tape or a thread sealant compound. For each 12” increase in distance from the end, the diameter increases by 3/4”.

GROUP SURFACE FINISH MATERIAL FLUTE TYPE CONTENTS PACKAGING

DIA INCH

HSTD BRIGHT HSS STRAIGHT 3 PCS - TAPER / INTER / BOTT SET CASE

TPI

OAL MM

DRILL MM

PACK QTY

$ EACH

TAPER PART NUMBER

INTERMEDIATE PART NUMBER

BOTTOMING PART NUMBER

$ SET

PART NUMBER

27 18 18 14 14 11.5 11.5 11.5 11.5

59.00 67.00 75.00 87.00 96.00 109.00 119.00 125.00 140.00

8.70 11.10 14.50 18.00 23.25 29.00 38.00 44.00 56.00

1 1 1 1 1 1 1 1 1

50.42 77.54 91.45 135.29 159.60 220.28 323.48 535.60 852.93

– – – – – – – – –

3052-1/8B 3052-1/4B 3052-3/8B 3052-1/2B 3052-3/4B 3052-1B 3052-1.1/4B 3052-1.1/2B 3052-2B

– – – – – – – – –

NPTF (DRYSEAL TAPER) 1/8 27 59.00 1/4 18 67.00 3/8 18 75.00 1/2 14 87.00

8.40 11.00 14.50 17.50

1 1 1 1

58.24 96.06 121.43 209.41

– – – –

3054-1/8B 3054-1/4B 3054-3/8B 3054-1/2B

– – – –

8.50 11.00 14.50 18.00

1 1 1 1

36.71 60.74 73.42 111.39

– – – –

3056-1/8B 3056-1/4B 3056-3/8B 3056-1/2B

– – – –

NPT 1/8 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2

NPSF (DRYSEAL) 1/8 27 NPTF (DRYSEAL TAPER) 1/4 18 NATIONAL PIPE TAPER FUEL 3/8 18 NPTF is a semi1/2 14 compatible variant of NPT, designed to provide a more leak free seal without the use of teflon tape or other sealant compound. NPTF threads are the same basic shape but with crest and root heights adjusted for an interference fit, eliminating the spiral leakage path.

HSTD BRIGHT HSS STRAIGHT SINGLE SNAP PACK / TELESCOPIC PACK

59.00 67.00 75.00 87.00

PAGE 112

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 112

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:31 PM

TAPS MACHINE HSS-Co5 HANG SELL

GROUP SURFACE FINISH MATERIAL FLUTE TYPE POINT TYPE / LEAD (THREADS) PACKAGING

DIA MM

PITCH MM

HPMT BRIGHT HSS-Co5* STRAIGHT GUN NOSE (SPIRAL POINT); 4-5 SNAP PACK / TELESCOPIC PACK

HPMT BRIGHT HSS-Co5* SPIRAL 35º 2-3 SNAP PACK / TELESCOPIC PACK

OAL MM

DRILL MM

PACK QTY

$ EACH

PART NUMBER

$ EACH

PART NUMBER

METRIC COARSE 3.00 0.50 3.50 0.60 4.00 0.70 5.00 0.80 6.00 1.00 7.00 1.00 8.00 1.25 9.00 1.25 10.00 1.50 11.00 1.50 12.00 1.75 14.00 2.00 16.00 2.00 18.00 2.50 20.00 2.50 22.00 2.50 24.00 3.00 27.00 3.00 30.00 3.50 33.00 3.50 36.00 4.00

48.00 50.00 53.00 58.00 66.00 66.00 72.00 72.00 80.00 85.00 89.00 95.00 102.00 112.00 112.00 118.00 130.00 135.00 138.00 151.00 162.00

2.50 2.90 3.30 4.20 5.00 6.00 6.80 7.80 8.50 9.50 10.20 12.00 14.00 15.50 17.50 19.50 21.00 24.00 26.50 29.50 32.00

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

23.41 25.83 19.36 19.64 21.27 29.32 24.21 43.62 33.09 51.95 48.17 61.90 82.09 102.32 116.00 142.71 162.65 254.20 300.46 385.87 427.95

3120-3.00 3120-3.50 3120-4.00 3120-5.00 3120-6.00 3120-7.00 3120-8.00 3120-9.00 3120-10.00 3120-11.00 3120-12.00 3120-14.00 3120-16.00 3120-18.00 3120-20.00 3120-22.00 3120-24.00 3120-27.00 3120-30.00 3120-33.00 3120-36.00

30.31 33.57 25.75 26.03 28.35 38.77 32.28 57.35 44.28 69.12 63.22 82.09 90.26 111.11 127.09 155.78 177.62 – – – –

3220-3.00 3220-3.50 3220-4.00 3220-5.00 3220-6.00 3220-7.00 3220-8.00 3220-9.00 3220-10.00 3220-11.00 3220-12.00 3220-14.00 3220-16.00 3220-18.00 3220-20.00 3220-22.00 3220-24.00 – – – –

METRIC FINE 5.00 0.50 6.00 0.75 8.00 1.00 10.00 1.00 10.00 1.25 12.00 1.50

58.00 66.00 69.00 76.00 76.00 89.00

4.50 5.20 7.00 9.00 8.80 10.50

1 1 1 1 1 1

37.96 38.43 42.02 44.28 44.28 60.96

3121-5.00 3121-6.00 3121-8.00 3122-10.00 3121-10.00 3121-12.00

51.06 53.51 62.96 64.29 68.39 81.40

3221-5.00 3221-6.00 3221-8.00 3222-10.00 3221-10.00 3221-12.00

SPARK PLUG 10.00 1.00

76.00

9.00

44.28

3122-10.00

64.29

3222-10.00

MC MF

SPIRAL FLUTE TAPS Spiral Flute Taps are used for machine tapping in all blind hole applications, especially in soft metals that produce long stringy swarf such as aluminium, copper and magnesium. Manufactured from HSS-Co5 this modern design tap uses the shear action provided by the spiral flutes to draw the swarf out of the hole which minimises swarf clogging when tapping deeper holes. SPIRAL POINT TAPS GUN NOSE Spiral Point Taps are used for machine tapping blind and through holes where there is sufficient clearance to accomodate chips. Manufactured from HSS-Co5 this modern design tap uses straight flutes supplemented by angular cutting faces at the point to produce a fine finish on the threads. Shallower flutes achieve a stronger cross section allowing the tap to withstand greater cutting forces.

* Some older stock may be supplied as HSSE-V3

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 113

WWW.BORDO.COM.AU

PAGE 113 21/04/12 6:31 PM

TAPS MACHINE HSS-Co5 HANG SELL

UNC UNF

GROUP SURFACE FINISH MATERIAL FLUTE TYPE POINT TYPE / LEAD (THREADS) PACKAGING

DIA INCH

HPMT BRIGHT HSS-Co5* STRAIGHT GUN NOSE (SPIRAL POINT); 4-5 SNAP PACK / TELESCOPIC PACK

HPMT BRIGHT HSS-Co5* SPIRAL 35ยบ 2-3 SNAP PACK / TELESCOPIC PACK

TPI

OAL MM

DRILL MM

PACK QTY

$ EACH

PART NUMBER

$ EACH

PART NUMBER

UNC 6G 8G 10G 12G 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1

32 32 24 24 20 18 16 14 13 12 11 10 9 8

50.00 53.00 58.00 62.00 66.00 72.00 80.00 85.00 89.00 95.00 102.00 112.00 118.00 130.00

2.85 3.50 3.90 4.50 5.10 6.60 8.00 9.40 10.80 12.20 13.50 16.50 19.50 22.25

1 1 1 1 1 1 1 1 1 1 1 1 1 1

24.76 24.76 24.76 29.32 23.41 26.91 35.28 45.47 53.28 79.50 83.85 106.92 149.92 188.60

3132-6G 3132-8G 3132-10G 3132-12G 3132-1/4 3132-5/16 3132-3/8 3132-7/16 3132-1/2 3132-9/16 3132-5/8 3132-3/4 3132-7/8 3132-1

26.91 26.91 26.91 26.91 25.04 29.32 38.77 52.62 60.95 86.98 91.34 116.57 164.25 205.42

3232-6G 3232-8G 3232-10G 3232-12G 3232-1/4 3232-5/16 3232-3/8 3232-7/16 3232-1/2 3232-9/16 3232-5/8 3232-3/4 3232-7/8 3232-1

UNF 5G 6G 8G 10G 12G 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1

44 40 36 32 28 28 24 24 20 20 18 18 16 14 12

48.00 50.00 53.00 58.00 62.00 66.00 69.00 76.00 82.00 84.00 90.00 95.00 104.00 113.00 120.00

2.70 2.95 3.50 4.10 4.70 5.50 6.90 8.50 9.90 11.50 12.90 14.50 17.50 20.40 23.25

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

28.07 26.06 26.06 26.06 30.87 24.64 28.33 37.13 47.87 56.09 72.26 76.23 106.92 149.92 188.60

3134-5G 3134-6G 3134-8G 3134-10G 3134-12G 3134-1/4 3134-5/16 3134-3/8 3134-7/16 3134-1/2 3134-9/16 3134-5/8 3134-3/4 3134-7/8 3134-1

30.58 28.33 28.33 28.33 28.33 26.36 30.87 40.80 52.42 60.95 79.07 83.04 105.97 149.33 186.76

3234-5G 3234-6G 3234-8G 3234-10G 3234-12G 3234-1/4 3234-5/16 3234-3/8 3234-7/16 3234-1/2 3234-9/16 3234-5/8 3234-3/4 3234-7/8 3234-1

* Some older stock may be supplied as HSSE-V3

PAGE 114

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 114

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:31 PM

TAPS MACHINE HSS-Co5 HANG SELL

GROUP SURFACE FINISH MATERIAL FLUTE TYPE POINT TYPE / LEAD (THREADS) PACKAGING

DIA INCH BSW 1/8 5/32 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1

HPMT BRIGHT HSS-Co5* STRAIGHT GUN NOSE (SPIRAL POINT); 4-5 SNAP PACK / TELESCOPIC PACK

HPMT BRIGHT HSS-Co5* SPIRAL 35ยบ 2-3 SNAP PACK / TELESCOPIC PACK

TPI

OAL MM

DRILL MM

PACK QTY

$ EACH

PART NUMBER

$ EACH

PART NUMBER

40 32 WHIT 24 20 18 16 14 12 12 11 10 9 8

48.00 53.00 58.00 66.00 72.00 80.00 85.00 89.00 95.00 102.00 112.00 118.00 130.00

2.55 3.20 3.70 5.10 6.50 7.90 9.30 10.50 12.10 13.50 16.25 19.25 22.00

1 1 1 1 1 1 1 1 1 1 1 1 1

22.93 22.93 23.76 23.76 27.19 35.66 45.62 53.00 69.12 72.26 92.64 129.53 163.78

3128-1/8 3128-5/32 3128-3/16 3128-1/4 3128-5/16 3128-3/8 3128-7/16 3128-1/2 3128-9/16 3128-5/8 3128-3/4 3128-7/8 3128-1

27.73 27.73 28.07 28.07 32.03 42.23 53.84 62.89 82.08 85.59 109.11 153.29 193.56

3228-1/8 3228-5/32 3228-3/16 3228-1/4 3228-5/16 3228-3/8 3228-7/16 3228-1/2 3228-9/16 3228-5/8 3228-3/4 3228-7/8 3228-1

BSW

* Some older stock may be supplied as HSSE-V3

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 115

WWW.BORDO.COM.AU

PAGE 115 21/04/12 6:31 PM

TAPS COLOUR BAND HSSE-V3 BULK

STAINLESS STEEL BLUE BAND The machining of stainless steels is difficult due to its work hardening properties, toughness and poor thermal conductivity, which places high demands on the cutting tools. The Blue Band Series has been specifically designed to suit these difficult machining requirements. TiAlN coating increases tool surface hardness to 87Rc. For machining materials with Hardness < 350 HB : Tensile Strength <1250 N/ mm2. TOUGH TREATABLE STEEL RED BAND The mechanical properties of materials are influenced diversely by the addition of alloying elements and heat treatment processes, resulting in some high-strength, quenched and tempered steels or hardened steels. This range has its own unique set of machining requirements which are satisified by the Red Band Series. TiAlN coating increases tool surface hardness to 87Rc. For machining materials with Hardness < 470 HB : Tensile Strength <1500 N/ mm2

PAGE 116

GROUP SURFACE FINISH MATERIAL POINT TYPE FLUTE TYPE PACKAGING

DIA PITCH MM MM METRIC COARSE 3.00 0.50 4.00 0.70 5.00 0.80 6.00 1.00 8.00 1.25 10.00 1.50 12.00 1.75 14.00 2.00 16.00 2.00 18.00 2.50 20.00 2.50 22.00 2.50 24.00 3.00

CBTP VIOLET / GREY HSSE-V3 TIAIN COATED SPIRAL FLUTE SPIRAL 40째 HELIX SNAP/TELESCOPIC PACK

OAL MM

PACK QTY

$ EACH

PART NUMBER

$ EACH

PART NUMBER

56.00 63.00 70.00 80.00 90.00 100.00 110.00 110.00 110.00 125.00 140.00 140.00 160.00

1 1 1 1 1 1 1 1 1 1 1 1 1

28.18 30.40 36.60 38.99 41.14 54.65 91.74 107.03 107.89 152.90 178.56 193.67 226.52

3150-3.00 3150-4.00 3150-5.00 3150-6.00 3150-8.00 3150-10.00 3150-12.00 3150-14.00 3150-16.00 3150-18.00 3150-20.00 3150-22.00 3150-24.00

34.10 36.04 44.05 47.28 58.32 73.14 109.16 127.36 128.38 181.94 212.49 230.46 269.56

3250-3.00 3250-4.00 3250-5.00 3250-6.00 3250-8.00 3250-10.00 3250-12.00 3250-14.00 3250-16.00 3250-18.00 3250-20.00 3250-22.00 3250-24.00

GROUP SURFACE FINISH MATERIAL POINT TYPE FLUTE TYPE PACKAGING

DIA PITCH MM MM METRIC COARSE 3.00 0.50 4.00 0.70 5.00 0.80 6.00 1.00 8.00 1.25 10.00 1.50 12.00 1.75 14.00 2.00 16.00 2.00 18.00 2.50 20.00 2.50 22.00 2.50 24.00 3.00

CBTP VIOLET / GREY HSSE-V3 TIAIN COATED SPIRAL POINT STRAIGHT SNAP/TELESCOPIC PACK

CBTP VIOLET / GREY HSSE-V3 TIAIN COATED SPIRAL FLUTE SPIRAL 15째 HELIX SNAP/TELESCOPIC PACK

OAL MM

PACK QTY

$ EACH

PART NUMBER

$ EACH

PART NUMBER

56.00 63.00 70.00 80.00 90.00 100.00 110.00 110.00 110.00 125.00 140.00 140.00 160.00

1 1 1 1 1 1 1 1 1 1 1 1 1

28.52 31.09 35.09 36.75 46.92 62.60 88.90 106.75 107.67 149.30 164.77 171.50 209.90

3152-3.00 3152-4.00 3152-5.00 3152-6.00 3152-8.00 3152-10.00 3152-12.00 3152-14.00 3152-16.00 3152-18.00 3152-20.00 3152-22.00 3152-24.00

30.02 31.88 37.26 39.40 49.00 63.68 91.58 109.94 110.90 152.29 168.07 174.94 214.10

3252-3.00 3252-4.00 3252-5.00 3252-6.00 3252-8.00 3252-10.00 3252-12.00 3252-14.00 3252-16.00 3252-18.00 3252-20.00 3252-22.00 3252-24.00

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 116

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:31 PM

TAPS COLOUR BAND HSSE-V3 BULK

GROUP SURFACE FINISH MATERIAL POINT TYPE FLUTE TYPE PACKAGING

DIA PITCH MM MM METRIC COARSE 3.00 0.50 4.00 0.70 5.00 0.80 6.00 1.00 8.00 1.25 10.00 1.50 12.00 1.75 14.00 2.00 16.00 2.00 18.00 2.50 20.00 2.50 22.00 2.50 24.00 3.00

CBTP BRIGHT HSSE-V3 SPIRAL POINT STRAIGHT SNAP/TELESCOPIC PACK

PACK QTY

$ EACH

PART NUMBER

$ EACH

PART NUMBER

$ EACH

PART NUMBER

56.00 63.00 70.00 80.00 90.00 100.00 110.00 110.00 110.00 125.00 140.00 140.00 160.00

1 1 1 1 1 1 1 1 1 1 1 1 1

13.15 14.30 14.23 14.92 19.03 25.42 45.72 54.90 61.52 85.31 94.15 98.00 119.95

3154-3.00 3154-4.00 3154-5.00 3154-6.00 3154-8.00 3154-10.00 3154-12.00 3154-14.00 3154-16.00 3154-18.00 3154-20.00 3154-22.00 3154-24.00

17.11 16.82 17.57 17.41 21.58 30.42 52.32 62.82 79.22 108.77 120.05 124.96 152.93

3254-3.00 3254-4.00 3254-5.00 3254-6.00 3254-8.00 3254-10.00 3254-12.00 3254-14.00 3254-16.00 3254-18.00 3254-20.00 3254-22.00 3254-24.00

31.68 32.24 33.84 35.00 37.96 54.00 – – – – – – –

3255-3.00 3255-4.00 3255-5.00 3255-6.00 3255-8.00 3255-10.00 – – – – – – –

CBTP GOLD COLOURED HSSE-V3 TiN COATED SPIRAL POINT STRAIGHT SNAP/TELESCOPIC PACK

CBTP GOLD COLOURED HSSE-V3 TiN COATED SPIRAL FLUTE SPIRAL 35° HELIX SNAP/TELESCOPIC PACK

CBTP VIOLET / GREY HSSE-V3 TIAIN COATED SPIRAL FLUTE SPIRAL 15° HELIX SNAP/TELESCOPIC PACK

OAL MM

PACK QTY

$ EACH

PART NUMBER

$ EACH

PART NUMBER

$ EACH

PART NUMBER

56.00 63.00 70.00 80.00 90.00 100.00 110.00 110.00 110.00 125.00 140.00 140.00 160.00

1 1 1 1 1 1 1 1 1 1 1 1 1

25.42 28.92 32.41 36.77 39.30 45.99 89.54 104.51 123.36 174.43 190.69 205.18 249.82

3156-3.00 3156-4.00 3156-5.00 3156-6.00 3156-8.00 3156-10.00 3156-12.00 3156-14.00 3156-16.00 3156-18.00 3156-20.00 3156-22.00 3156-24.00

35.54 39.62 44.94 50.43 53.14 71.22 92.08 105.04 105.98 142.09 156.72 167.55 211.12

3256-3.00 3256-4.00 3256-5.00 3256-6.00 3256-8.00 3256-10.00 3256-12.00 3256-14.00 3256-16.00 3256-18.00 3256-20.00 3256-22.00 3256-24.00

37.83 38.47 41.56 48.13 59.89 73.85 105.45 121.65 128.09 162.33 189.49 201.30 244.86

3258-3.00 3258-4.00 3258-5.00 3258-6.00 3258-8.00 3258-10.00 3258-12.00 3258-14.00 3258-16.00 3258-18.00 3258-20.00 3258-22.00 3258-24.00

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 117

CBTP BRIGHT HSSE-V3 ROLL FORM FLUTELESS SNAP/TELESCOPIC PACK

OAL MM

GROUP SURFACE FINISH MATERIAL POINT TYPE FLUTE TYPE PACKAGING

DIA PITCH MM MM METRIC COARSE 3.00 0.50 4.00 0.70 5.00 0.80 6.00 1.00 8.00 1.25 10.00 1.50 12.00 1.75 14.00 2.00 16.00 2.00 18.00 2.50 20.00 2.50 22.00 2.50 24.00 3.00

CBTP BRIGHT HSSE-V3 SPIRAL FLUTE SPIRAL 40° HELIX SNAP/TELESCOPIC PACK

WWW.BORDO.COM.AU

ALUMINIUM YELLOW BAND The alloying elements which achieve varying Aluminium Alloys have an effect on the machining properties of these materials. This generally creates a difficult long chip formation and material which has tendencies to stick to the tool, placing a unique set of demands on tooling. Yellow Band Series contends with these difficulties. For machining materials with Hardness < 200 HB : Tensile Strength <700 N/mm2 CARBON STEEL GREEN BAND The machinability of different carbon steels is as varied as their properties. Soft-tough construction steels place a unique set of demands on the tools. The Green Band Series of drills and taps have been developed specifically for this range of steels. TiN coating increases tool surface hardness to 85Rc. For machining materials with Hardness < 250 HB : Tensile Strength <900 N/mm2 CAST IRON WHITE BAND A highly abrasive material with damping and thermal conductivity, high strength and resistance to wear. Cast Iron is used extensively for mass produced components. The White Band Series is designed for this specific purpose. TiAlN coating increases tool surface hardness to 87Rc. For machining materials with Hardness < 300 HB : Tensile Strength <1000 N/mm2

PAGE 117 21/04/12 6:31 PM

TAPS HAND & MACHINE SETS

GROUP SURFACE FINISH DRILL MATERIAL & TYPE TAP MATERIAL & TYPE PACKAGING

NEW SETS

CBTP VIOLET / GREY HSS-Co TiAlN JOBBER HSSE-V3 TiAlN INTER SET

PART NUMBER 3020-S1 – –

$ SET – 178.14 –

PART NUMBER – 3020-S2 –

$ SET – – 564.60

PART NUMBER – – 3150-S1

DESCRIPTION

PART NUMBER

DESCRIPTION

PART NUMBER

DESCRIPTION

PAR T NUMBER

3.00 x 0.50 4.00 x 0.70 5.00 x 0.80 6.00 x 1.00 8.00 x 1.25 10.00 x 1.50 12.00 x 1.75 – – – – – – –

3020-3.00I 3020-4.00I 3020-5.00I 3020-6.00I 3020-8.00I 3020-10.00I 3020-12.00I – – – – – – –

3.00 x 0.50 4.00 x 0.70 5.00 x 0.80 6.00 x 1.00 8.00 x 1.25 10.00 x 1.50 12.00 x 1.75 2.50MM JOBBER 3.30MM JOBBER 4.20MM JOBBER 5.00MM JOBBER 6.80MM JOBBER 8.50MM JOBBER 10.20MM JOBBER

3020-3.00I 3020-4.00I 3020-5.00I 3020-6.00I 3020-8.00I 3020-10.00I 3020-12.00I 2007-2.50 2007-3.30 2007-4.20 2007-5.00 2007-6.80 2007-8.50 2007-10.20

3.00 x 0.50 4.00 x 0.70 5.00 x 0.80 6.00 x 1.00 8.00 x 1.25 10.00 x 1.50 12.00 x 1.75 2.50MM JOBBER 3.30MM JOBBER 4.20MM JOBBER 5.00MM JOBBER 6.80MM JOBBER 8.50MM JOBBER 10.20MM JOBBER

3150-3.00 3150-4.00 3150-5.00 3150-6.00 3150-8.00 3150-10.00 3150-12.00 2050-2.50 2050-3.30 2050-4.20 2050-5.00 2050-6.80 2050-8.50 2050-10.20

HSS TAP SET METRIC COARSE - 7 PCE HSS MC DRILL & TAP SET - M3 TO M12 BLUE BAND MC DRILL & TAP SET - M3 TO M12

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 118

HSTD BRIGHT HSS JOBBER HSS INTERMEDIATE LEADS SET

$ SET 141.67 – –

SET TYPE

SET CONTENTS

PAGE 118

HSTD BRIGHT – HSS INTERMEDIATE LEADS SET

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 23/04/12 11:08 AM

TAPS HAND & MACHINE HSS MERCHANDISER

GROUP SURFACE FINISH MATERIAL LEAD TYPE FLUTE TYPE PACKAGING

HSTD BRIGHT HSS TAPER / INTER / BOTTOMING STRAIGHT HANG SELL MERCHANDISER

TOTAL PIECES 51

MERCHANDISER TYPE HSS TAP MERCHANDISER

$ MERCHANDISER 1,795.09

PART NUMBER 3020-D1

MERCHANDISER CONTENTS QTY TYPE EACH THREAD FORM 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

MC - Taper MC - Taper MC - Taper MC - Taper MC - Taper MC - Taper MC - Taper MC - Taper MC - Taper MC - Inter MC - Inter MC - Inter MC - Inter MC - Inter MC - Inter MC - Inter MC - Inter MC - Inter

SIZE D X PITCH

PART NUMBER

3 x 0.5 4 x 0.7 5 x 0.8 6x1 8 x 1.25 10 x 1.5 12 x 1.75 16 x 2 20 x 2.5 3 x 0.5 4 x 0.7 5 x 0.8 6x1 8 x 1.25 10 x 1.5 12 x 1.75 16 x 2 20 x 2.5

3020-3.00T 3020-4.00T 3020-5.00T 3020-6.00T 3020-8.00T 3020-10.00T 3020-12.00T 3020-16.00T 3020-20.00T 3020-3.00I 3020-4.00I 3020-5.00I 3020-6.00I 3020-8.00I 3020-10.00I 3020-12.00I 3020-16.00I 3020-20.00I

QTY TYPE EACH THREAD FORM

SIZE D X PITCH

PART NUMBER

1 1 1 1 1 1 1 1 1

MC - Bott MC - Bott MC - Bott MC - Bott MC - Bott MC - Bott MC - Bott MC - Bott MC - Bott

3 x 0.5 4 x 0.7 5 x 0.8 6x1 8 x 1.25 10 x 1.5 12 x 1.75 16 x 2 20 x 2.5

3020-3.00B 3020-4.00B 3020-5.00B 3020-6.00B 3020-8.00B 3020-10.00B 3020-12.00B 3020-16.00B 3020-20.00B

1 1 1

BSPT - Bott BSPT - Bott BSPT - Bott

1/8 x 28 1/4 x 19 3/8 x 19

3048-1/8B 3048-1/4B 3048-3/8B

1 1 1

NPT - Bott NPT - Bott NPT - Bott

1/8 x 27 1/4 x 18 3/8 x 18

3052-1/8B 3052-1/4B 3052-3/8B

QTY TYPE EACH THREAD FORM

PART NUMBER

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

UNC - Taper UNC - Taper UNC - Taper UNC - Taper UNC - Taper UNC - Inter UNC - Inter UNC - Inter UNC - Inter UNC - Inter UNC - Bott UNC - Bott UNC - Bott UNC - Bott UNC - Bott

3/16x 24(UNS) 1/4 x 20 5/16 x 18 3/8 x 16 1/2 x 13 3/16x 24(UNS) 1/4 x 20 5/16 x 18 3/8 x 16 1/2x13 3/16x 24(UNS) 1/4 x 20 5/16 x 18 3/8 x16 1/2 x 13

3032-3/16T 3032-1/4T 3032-5/16T 3032-3/8T 3032-1/2T 3032-3/16I 3032-1/4I 3032-5/16I 3032-3/8I 3032-1/2I 3032-3/16B 3032-1/4B 3032-5/16B 3032-3/8B 3032-1/2B

1 1 1

BSW - Taper BSW - Inter BSW - Bott

1/2 x 12 1/2 x 12 1/2 x 12

3028-1/2T 3028-1/2I 3028-1/2B

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 119

SIZE D X PITCH

WWW.BORDO.COM.AU

PAGE 119 21/04/12 6:32 PM

TAPS HAND & MACHINE HSS MERCHANDISER

GROUP SURFACE FINISH MATERIAL LEAD TYPE FLUTE TYPE PACKAGING

HSTD BRIGHT HSS TAPER / INTER / BOTTOMING STRAIGHT BULK MERCHANDISER

TOTAL PIECES 163

MERCHANDISER TYPE BULK THREADING MERCHANDISER

TAPER TAPS MERCHANDISER CONTENTS Taper Taps have a QTY TYPE SIZE lead of eight threads EACH THREAD FORM D X PITCH and are used as a starting tap in difficult 1 MC - Taper 3 x 0.5 or high precision holes. 1 MC - Taper 4 x 0.7 Manufactured from 1 MC - Taper 5 x 0.8 HSS this general 1 MC - Taper 6x1 purpose tap is designed for use in medium 1 MC - Taper 8 x 1.25 tensile materials and 1 MC - Taper 10 x 1.5 is for hand or general 1 MC - Taper 12 x 1.75 machine use. 1 MC - Taper 14 x 2 INTERMEDIATE TAPS Intermediate Taps have a lead of four threads and are used in most general purpose applications to cut a thread true to a pre-drilled pilot hole. BOTTOMING TAPS Bottoming Taps have a lead of two threads and are used to ensure minimum thread run-out when tapping to the bottom of a blind hole. Bottoming Taps are typically preceded by the use of a Taper or Intermediate Tap.

PAGE 120

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

MC - Taper MC - Taper MC - Taper MC - Inter MC - Inter MC - Inter MC - Inter MC - Inter MC - Inter MC - Inter MC - Inter MC - Inter MC - Inter MC - Inter MC - Bott MC - Bott MC - Bott MC - Bott MC - Bott MC - Bott MC - Bott MC - Bott MC - Bott MC - Bott MC - Bott

16 x 2 18 x 2.5 20 x 2.5 3 x 0.5 4 x 0.7 5 x 0.8 6x1 8 x 1.25 10 x 1.5 12 x 1.75 14 x 2 16 x 2 18 x 2.5 20 x 2.5 3 x 0.5 4 x 0.7 5 x 0.8 6x1 8 x 1.25 10 x 1.5 12 x 1.75 14 x 2 16 x 2 18 x 2.5 20 x 2.5

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

MF - Taper S/Plug - Taper MF - Taper S/Plug - Taper MF - Taper S/Plug - Taper MF - Taper MF - Taper MF - Inter S/Plug - Inter MF - Inter S/Plug - Inter MF - Inter S/Plug - Inter MF - Inter MF - Inter MF - Bott S/Plug - Bott MF - Bott S/Plug - Bott MF - Bott

8x1 10 x 1 10 x 1.25 12 x 1.25 12 x 1.5 14 x 1.25 14 x 1.5 25 x 1.5 8x1 10 x 1 10 x 1.25 12 x 1.25 12 x 1.5 14 x 1.25 14 x 1.5 25 x 1.5 8x1 10 x 1 10 x 1.25 12 x 1.25 12 x 1.5

PART QTY TYPE NUMBER EACH THREAD FORM 3020-3.00T 1 S/Plug - Bott 3020-4.00T 1 MF - Bott 3020-5.00T 1 MF - Bott 3020-6.00T 3020-8.00T 1 UNC - Taper 3020-10.00T 1 UNC - Taper 3020-12.00T 1 UNC - Taper 3020-14.00T 1 UNC - Taper 3020-16.00T 1 UNC - Taper 3020-18.00T 1 UNC - Taper 3020-20.00T 1 UNC - Taper 3020-3.00I 1 UNC - Taper 3020-4.00I 1 UNC - Taper 3020-5.00I 1 UNC - Taper 3020-6.00I 1 UNC - Taper 3020-8.00I 1 UNC - Taper 3020-10.00I 1 UNC - Inter 3020-12.00I 1 UNC - Inter 3020-14.00I 1 UNC - Inter 3020-16.00I 1 UNC - Inter 3020-18.00I 1 UNC - Inter 3020-20.00I 1 UNC - Inter 3020-3.00B 1 UNC - Inter 3020-4.00B 1 UNC - Inter 3020-5.00B 1 UNC - Inter 3020-6.00B 1 UNC - Inter 3020-8.00B 1 UNC - Inter 3020-10.00B 1 UNC - Inter 3020-12.00B 1 UNC - Bott 3020-14.00B 1 UNC - Bott 3020-16.00B 1 UNC - Bott 3020-18.00B 1 UNC - Bott 3020-20.00B 1 UNC - Bott 1 UNC - Bott 3021-8.00T 1 UNC - Bott 3022-10.00T 1 UNC - Bott 3021-10.00T 1 UNC - Bott 3022-12.00T 1 UNC - Bott 3021-12.00T 1 UNC - Bott 3022-14.00T 1 UNC - Bott 3021-14.00T 3023-25.00T 1 UNF - Taper 3021-8.00I 1 UNF - Taper 3022-10.00I 1 UNC - Taper 3021-10.00I 1 UNF - Taper 3022-12.00I 1 UNF - Taper 3021-12.00I 1 UNF - Taper 3022-14.00I 1 UNF - Taper 3021-14.00I 1 UNF - Taper 3023-25.00I 1 UNF - Taper 3021-8.00B 1 UNF - Taper 3022-10.00B 1 UNF - Taper 3021-10.00B 1 UNF - Taper 3022-12.00B 1 UNF - Inter 3021-12.00B 1 UNF - Inter

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 120

$ MERCHANDISER 8,824.73

PART NUMBER 3020-D3

SIZE D X PITCH 14 x 1.25 14 x 1.5 25 x 1.5 8G x 32 10G x 24 3/16x 24(UNS) 1/4 x 20 5/16 x 18 3/8 x 16 7/16 x 14 1/2 x 13 9/16 x 12 5/8 x 11 3/4 x 10 1x8 8G x 32 10G x 24 3/16x 24(UNS) 1/4 x 20 5/16 x 18 3/8 x 16 7/16x14 1/2x13 9/16 x 12 5/8 x 11 3/4 x 10 1x8 8G x 32 10G x 24 3/16x 24(UNS) 1/4 x 20 5/16 x 18 3/8x16 7/16 x 14 1/2 x 13 9/16 x 12 5/8 x 11 3/4 x 10 1x8 8G x 36 10G x 32 3/16x 24(UNS) 1/4 x 28 5/16 x 24 3/8 x 24 7/16 x 20 1/2 x 20 9/16 x 18 5/8 x 18 3/4 x 16 1 x 12 8G x 36 10G x 32

PART QTY TYPE SIZE NUMBER EACH THREAD FORM D X PITCH 3022-14.00B 1 UNC - Inter 3/16x 24(UNS) 3021-14.00B 1 UNF - Inter 1/4 x 28 3023-25.00B 1 UNF - Inter 5/16 x 24 1 UNF - Inter 3/8 x 24 3032-8GT 1 UNF - Inter 7/16 x 20 3032-10GT 1 UNF - Inter 1/2 x 20 3032-3/16T 1 UNF - Inter 9/16 x 18 3032-1/4T 1 UNF - Inter 5/8 x 18 3032-5/16T 1 UNF - Inter 3/4 x 16 3032-3/8T 1 UNF - Inter 1 x 12 3032-7/16T 1 UNF - Bott 8G x 36 3032-1/2T 1 UNF - Bott 10G x 32 3032-9/16T 1 UNC - Bott 3/16x 24(UNS) 3032-5/8T 1 UNF - Bott 1/4 x 28 3032-3/4T 1 UNF - Bott 5/16 x 24 3032-1T 1 UNF - Bott 3/8 x 24 3032-8GI 1 UNF - Bott 7/16 x 20 3032-10GI 1 UNF - Bott 1/2 x 20 3032-3/16I 1 UNF - Bott 9/16 x 18 3032-1/4I 1 UNF - Bott 5/8 x 18 3032-5/16I 1 UNF - Bott 3/4 x 16 3032-3/8I 1 UNF - Bott 1 x 12 3032-7/16I 3032-1/2I 1 BSPF - Taper 1/8 x 28 3032-9/16I 1 BSPF - Taper 1/4 x 19 3032-5/8I 1 BSPF - Taper 3/8 x 19 3032-3/4I 1 BSPF - Taper 1/2 x 14 3032-1I 1 BSPF - Taper 3/4 x 14 3032-8GB 1 BSPF - Taper 1 x 11 3032-10GB 1 BSPF - Inter 1/8 x 28 3032-3/16B 1 BSPF - Inter 1/4 x 19 3/8 x 19 3032-1/4B 1 BSPF - Inter 3032-5/16B 1 BSPF - Inter 1/2 x 14 3032-3/8B 1 BSPF - Inter 3/4 x 14 3032-7/16B 1 BSPF - Inter 1 x 11 3032-1/2B 1 BSPF - Bott 1/8 x 28 3032-9/16B 1 BSPF - Bott 1/4 x 19 3032-5/8B 1 BSPF - Bott 3/8 x 19 3032-3/4B 1 BSPF - Bott 1/2 x 14 3032-1B 1 BSPF - Bott 3/4 x 14 1 BSPF - Bott 1 x 11 3034-8GT 1 BSPT - Bott 1/8 x 28 3034-10GT 1 BSPT - Bott 1/4 x 19 3032-3/16T 1 BSPT - Bott 3/8 x 19 3034-1/4T 1 BSPT - Bott 1/2 x 14 3034-5/16T 1 BSPT - Bott 3/4 x 14 3034-3/8T 1 BSPT - Bott 1 x 11 3034-7/16T 3034-1/2T 1 NPT - Bott 1/8 x 27 3034-9/16T 1 NPT - Bott 1/4 x 18 3034-5/8T 1 NPT - Bott 3/8 x 18 3034-3/4T 1 NPT - Bott 1/2 x 14 3034-1T 1 NPT - Bott 3/4 x 14 3034-8GI 1 NPT - Bott 1 x 11.5 3034-10GI

PART NUMBER 3032-3/16I 3034-1/4I 3034-5/16I 3034-3/8I 3034-7/16I 3034-1/2I 3034-9/16I 3034-5/8I 3034-3/4I 3034-1I 3034-8GB 3034-10GB 3032-3/16B 3034-1/4B 3034-5/16B 3034-3/8B 3034-7/16B 3034-1/2B 3034-9/16B 3034-5/8B 3034-3/4B 3034-1B 3046-1/8T 3046-1/4T 3046-3/8T 3046-1/2T 3046-3/4T 3046-1T 3046-1/8I 3046-1/4I 3046-3/8I 3046-1/2I 3046-3/4I 3046-1I 3046-1/8B 3046-1/4B 3046-3/8B 3046-1/2B 3046-3/4B 3046-1B 3048-1/8B 3048-1/4B 3048-3/8B 3048-1/2B 3048-3/4B 3048-1B 3052-1/8B 3052-1/4B 3052-3/8B 3052-1/2B 3052-3/4B 3052-1B

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:32 PM

Ã&#x2DC;

TAPS DRILL TAPS HSS HANG, SET, MERCH

HSTD BRIGHT HSS SPIRAL 1/4" HEX HANG SELL

d h = 45Ã·48 mm

GROUP SURFACE FINISH MATERIAL FLUTE TYPE SHANK PACKAGING

Ã¸ DIA PITCH / TPI MM / INCH MM

DRILL

2 TAP

MC 3.00 4.00 5.00 6.00 8.00 10.00 UNC 6G 8G 10G 12G 1/4 5/16 3/8 UNF 10G

OAL MM

PACK QTY

$ EACH

PART NUMBER

COMBINATION DRILL TAPS FEATURES

0.50 0.70 0.80 1.00 1.25 1.50

36 39 41 44 51 58

1 1 1 1 1 1

27.81 27.81 27.81 27.81 30.39 40.69

3010-3.00 3010-4.00 3010-5.00 3010-6.00 3010-8.00 3010-10.00

32 32 24 24 20 18 16

39 39 41 44 44 50 59

1 1 1 1 1 1 1

27.81 27.81 27.81 27.81 27.81 30.39 40.69

3011-6G 3011-8G 3011-10G 3011-12G 3011-1/4 3011-5/16 3011-3/8

27.81

3012-10G

s 3AVE TIME $RILL tap and deburr in one operation. s /NE PIECE DRILL TAP guarantees correct drill for tap size. s 4APERED DESIGN prevents thread damage from over drilling. s -ADE OF HIGH speed steel for long life. s !FTER COMPLETING tap, reverse the drill to back out. s 5SE OF CUTTING OIL recommended. s #LEAN TAP OF METAL chips to extend life. s #APACITY 10 gauge (3.5mm).

DEBURR

$ PART SET NUMBER 121.64 HSS DRILL TAP SETâ&#x20AC;&#x201C; METRIC COARSE 3010-S1 M3X0.50, M4X0.70, M5X0.80, M6X1.00, M8X1.25, M10X1.50 + 1/4" QUICK CHANGE BIT HOLDER SET TYPE

$ MERCHANDISER 663.54

MERCHANDISER TYPE DRILL TAP MERCHANDISER MERCHANDISER CONTENTS

QTY 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 121

DESCRIPTION MC 3.00 X 0.50 MC 4.00 X 0.70 MC 5.00 X 0.80 MC 6.00 X 1.00 MC 8.00 X 1.25 MC 10.00 X 1.50 UNC 6G X 32 UNC 8G X 32 UNC 10G X 24 UNC 12G X 24 UNC 1/4 X 20 UNC 5/16 X 18 UNC 3/8 X 16 UNF 10G X 32 SET

PART NUMBER 3010-D1 PART NUMBER 3010-3.00 3010-4.00 3010-5.00 3010-6.00 3010-8.00 3010-10.00 3011-6G 3011-8G 3011-10G 3011-12G 3011-1/4 3011-3/8 3011-5/16 3012-10G 3010-S1

WWW.BORDO.COM.AU

PAGE 121 21/04/12 6:32 PM

TAP & DIE WRENCHES & HOLDERS

GROUP WRENCH TYPE PACKAGING

SIZE MM

CTAP BAR PATTERN BULK

RANGE MM

RANGE OAL PACK INCH MM QTY BAR PATTERN TAP WRENCH 00 M2–M6 1/16 – 1/4 165 1 0 M3–M12 1/8 – 1/2 200 1 5 M5–M16 3/16 –5/8 255 1 6 M6–M20 1/4 – 3/4 345 1 7 M10–M25 3/8 – 1 420 1 8 M20–M38 3/4 – 1-1/2 630 1

$ EACH

PART NUMBER

$ EACH

PART NUMBER

– – – – 142.21 378.54

– – – – 4998-3/8-1 4998-3/4-1.1/2

57.87 60.96 73.86 94.16 – –

4998-1/16-1/4 4998-1/8-1/2 4998-3/16-5/8 4998-1/4-3/4 – –

GROUP WRENCH TYPE PACKAGING

NEW WRENCH

SIZE INCH

CTAP T PATTERN HANG SELL

RANGE MM

RANGE INCH

PACK QTY

T PATTERN TAP WRENCH 1/4 M3–M6 1/8 – 1/4 1 1/2 M3–M12 1/4 – 1/2 1 T PATTERN TAP WRENCH - RATCHET 1/4 M3–M6 1/4 – 3/4 1 1/2 M6–M12 1/4 – 1/2 1 QUICK CHANGE RATCHET TAP WRENCH SET 1/2 M2–M12 1/8 – 1/2 1

DIE HOLDER 1 1-1/2 2

PAGE 122

CTAP T PATTERN - RACHET HANG SELL

CTAP QUICK CHANGE RACHET SET DISPLAY CASE

$ EACH

PART NUMBER

$ EACH

PART NUMBER

$ EACH

PART NUMBER

27.09 43.12

4997-1/8-1/4 4997-1/4-1/2

– –

45.59 59.45

4996-1/8-1/4 4996-1/4-1/2

– –

–

113.30

4996-1/2QC

GROUP WRENCH TYPE PACKAGING

SIZE INCH

CTAP BAR PATTERN HANG SELL

CTAP DIE HOLDER HANG SELL

RANGE MM

OAL MM

PACK QTY

$ EACH

PART NUMBER

– – –

210 310 400

1 1 1

25.70 57.26 77.54

4999-1 4999-1.1/2 4999-2

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 122

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:32 PM

SCREW EXTRACTORS LH STUB DRILLS

SIZE 1 2 3 4 5 6 7 8 9

PILOT DRILL MM INCH 2.00 3.00 4.00 6.35 7.50 10.70 13.50 20.60 27.00

FOR BOLT MM INCH

5/64 4-4.5 5/32-3/16 7/64 5.5-6.5 7/32-1/4 5/32 8 5/16 1/4 10-12 3/8-1/2 19/64 14-20 9/16-3/4 27/64 19-25 3/4-1 17/32 25-35 1 - 1-3/8 13/16 35-44.5 1-3/8 - 1-3/4 1-1/16 44.5-54 1-3/4 - 2-1/8

PACK QTY

$ EACH

5 5 5 5 5 1 1 1 1

6.84 7.31 8.99 9.65 11.19 14.12 22.28 99.60 134.89

No. 5 INCLUDES Left Hand Stub Drill For Screws 14.0-20.0mm

SCREW EXTRACTOR

No. 5 No. 5 For Screws 14.0-20.0mm Pilot Drill 7.50mm

INCLUDES Left Hand Stub Drill For Screws 14.0-20.0mm

SCREW EXTRACTOR

EXTR BRONZE * HSS-Co5* LH STUB DRILL ONLY BULK

CHROME ALLOY

CHROME ALLOY ALLOY CHROME

CHROME ALLOY

PART PACK NUMBER QTY

$ EACH

PART PACK NUMBER QTY

$ EACH

PART PACK NUMBER QTY

$ EACH

PART NUMBER

9900-1 9900-2 9900-3 9900-4 9900-5 9900-6 9900-7 9900-8 9900-9

7.48 7.92 9.49 10.25 11.81 – – – –

9900-1S 9900-2S 9900-3S 9900-4S 9900-5S – – – –

10.89 11.12 13.87 17.83 20.46 – – – –

9900-1W 9900-2W 9900-3W 9900-4W 9900-5W – – – –

3.64 3.43 4.60 7.81 8.87 – – – –

2005-5/64 2005-7/64 2005-5/32 2005-1/4 2005-19/64 – – – –

1 1 1 1 1 – – – –

$ SET 47.85 –

SET DECRIPTION SCREW EXTRACTORS - SM1 SCREW EXT. + LH STUB DRILLS - SM2 SET CONTENTS

EXTR BRIGHT CHOME ALLOY EXTRACTOR + LH STUB DRILL CLAM SHELL

SCREW EXTRACTOR

No. 5

EXTR BRIGHT CHOME ALLOY – CLAM SHELL

For Screws 14.0-20.0mm Pilot Drill 7.50mm

EXTR BRIGHT CHOME ALLOY – BULK

SCREW EXTRACTOR

GROUP SURFACE FINISH MATERIAL DRILL PACKAGING

1+1 1+1 1+1 1+1 1+1 – – – –

PART NUMBER 9900-SM1 –

5 5 5 5 5 – – – –

$ SET – 82.30

NEW MATERIAL

DRILL BIT MATERIALS HSS-Co5 (COBALT) Bordo’s Cobalt stub drills are manufactured from HSS-Co5 steel which is very similar to M2 HSS with the important addition of 5% cobalt. The addition of cobalt to M2 HSS significantly increases heat resistance and allows the drill to run at higher temperatures without losing its temper (hardness). Cobalt drills provide increased performance and tool life when machining tough steels. HSS-Co5 (Cobalt) stub drills are ideal for use in drilling stainless steel and high tensile steel.

PART NUMBER – 9900-SM2

QTY EACH

SIZE

PART NUMBER

QTY EACH

SIZE

PART NUMBER

1 1 1 1 1

1 2 3 4 5

9900-1 9900-2 9900-3 9900-4 9900-5

1 1 1 1 1 1 1 1 1 1

1 2 3 4 5 5/64" 7/64" 5/32" 1/4" 19/64"

9900-1 9900-2 9900-3 9900-4 9900-5 – – – – –

* Some older stock may be supplied as black finish HSS drills

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 123

WWW.BORDO.COM.AU

PAGE 123 21/04/12 6:32 PM

MILLING CUTTERS SLOT DRILLS SHORT

GROUP SURFACE FINISH MATERIAL LENGTH TYPE PACKAGING DIA MM SHORT 1.50 2.00 2.50 3.00 3.50 4.00 4.50 5.00 5.50 6.00 6.50 7.00 7.50 8.00 8.50 9.00 9.50 10.00 10.50 11.00 12.00 13.00 14.00 15.00 16.00 17.00 18.00 19.00 20.00 22.00 24.00 25.00 28.00 30.00 32.00 36.00 40.00 45.00 50.00

PAGE 124

ENDM BRIGHT HSS-Co8 SHORT CENTRE CUTTING THREADED SINGLE

ENDM BRIGHT HSS-Co8 SHORT CENTRE CUTTING PLAIN - FLATTED SINGLE

SHANK MM

FL MM

OAL MM

FLUTES #

PACK QTY

$ EACH

PART NUMBER

$ EACH

PART NUMBER

6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 12.00 12.00 12.00 12.00 12.00 12.00 16.00 16.00 16.00 16.00 16.00 25.00 25.00 25.00 25.00 25.00 32.00 32.00 32.00 32.00 32.00

2.50 4.00 5.00 5.00 6.00 7.00 7.00 8.00 8.00 8.00 10.00 10.00 10.00 11.00 11.00 11.00 11.00 13.00 13.00 13.00 16.00 16.00 16.00 16.00 19.00 19.00 19.00 19.00 19.00 26.00 26.00 26.00 26.00 26.00 32.00 32.00 38.00 38.00 45.00

48.00 48.00 49.00 49.00 50.00 51.00 51.00 52.00 52.00 52.00 60.00 60.00 60.00 61.00 61.00 61.00 61.00 63.00 70.00 70.00 73.00 73.00 73.00 73.00 79.00 79.00 79.00 79.00 79.00 102.00 102.00 102.00 102.00 102.00 112.00 112.00 118.00 118.00 125.00

2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

21.30 21.30 21.30 21.71 21.71 23.10 23.10 23.32 23.58 23.58 34.89 35.07 35.07 35.76 35.97 36.42 36.66 36.66 43.51 43.89 44.49 47.22 55.12 65.04 65.04 71.48 74.55 83.11 88.99 137.30 139.83 139.83 178.63 223.22 237.73 257.05 367.48 454.42 530.68

6006-1.50S 6006-2.00S 6006-2.50S 6006-3.00S 6006-3.50S 6006-4.00S 6006-4.50S 6006-5.00S 6006-5.50S 6006-6.00S 6006-6.50S 6006-7.00S 6006-7.50S 6006-8.00S 6006-8.50S 6006-9.00S 6006-9.50S 6006-10.00S 6006-10.50S 6006-11.00S 6006-12.00S 6006-13.00S 6006-14.00S 6006-15.00S 6006-16.00S 6006-17.00S 6006-18.00S 6006-19.00S 6006-20.00S 6006-22.00S 6006-24.00S 6006-25.00S 6006-28.00S 6006-30.00S 6006-32.00S 6006-36.00S 6006-40.00S 6006-45.00S 6006-50.00S

– – – 21.27 21.54 22.58 22.58 22.79 23.03 23.03 33.76 33.93 33.93 34.59 34.76 35.21 35.42 35.42 – 48.16 48.76 51.49 59.40 69.33 69.33 – 78.83 – 93.27 141.57 – 145.68 – – – – – – –

– – – 6010-3.00S 6010-3.50S 6010-4.00S 6010-4.50S 6010-5.00S 6010-5.50S 6010-6.00S 6010-6.50S 6010-7.00S 6010-7.50S 6010-8.00S 6010-8.50S 6010-9.00S 6010-9.50S 6010-10.00S – 6010-11.00S 6010-12.00S 6010-13.00S 6010-14.00S 6010-15.00S 6010-16.00S – 6010-18.00S – 6010-20.00S 6010-22.00S – 6010-25.00S – – – – – – –

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 124

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:32 PM

MILLING CUTTERS SLOT DRILLS LONG

GROUP SURFACE FINISH MATERIAL LENGTH TYPE PACKAGING DIA MM LONG 2.00 3.00 4.00 5.00 6.00 6.50 7.00 8.00 8.50 9.00 10.00 11.00 12.00 13.00 14.00 15.00 16.00 17.00 18.00 19.00 20.00

ENDM BRIGHT HSS-Co8 LONG CENTRE CUTTING THREADED SINGLE

ENDM BRIGHT HSS-Co8 LONG CENTRE CUTTING PLAIN - FLATTED SINGLE

SHANK MM

FL MM

OAL MM

FLUTES #

PACK QTY

$ EACH

PART NUMBER

$ EACH

PART NUMBER

6.00 6.00 6.00 6.00 6.00 10.00 10.00 10.00 10.00 10.00 10.00 12.00 12.00 12.00 12.00 12.00 16.00 16.00 16.00 16.00 16.00

4.00 11.00 12.50 12.50 16.00 16.00 16.00 19.00 22.00 22.00 22.00 22.00 25.50 25.50 28.50 31.50 31.50 35.00 35.00 38.00 38.00

51.00 60.50 66.50 70.00 76.00 76.00 76.00 79.50 82.50 82.50 82.50 89.00 95.00 95.00 101.50 108.00 108.00 114.50 114.50 120.50 120.50

2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

26.44 25.60 26.51 27.70 27.70 43.74 43.74 45.43 46.31 46.31 46.31 55.74 55.74 61.86 64.62 86.76 86.76 94.99 99.95 121.69 121.69

6006-2.00L 6006-3.00L 6006-4.00L 6006-5.00L 6006-6.00L 6006-6.50L 6006-7.00L 6006-8.00L 6006-8.50L 6006-9.00L 6006-10.00L 6006-11.00L 6006-12.00L 6006-13.00L 6006-14.00L 6006-15.00L 6006-16.00L 6006-17.00L 6006-18.00L 6006-19.00L 6006-20.00L

– 25.32 24.16 25.32 25.68 – – 36.70 36.86 36.97 39.64 55.09 58.56 60.16 75.59 81.37 95.47 – 108.64 – 125.51

– 6010-3.00L 6010-4.00L 6010-5.00L 6010-6.00L – – 6010-8.00L 6010-8.50L 6010-9.00L 6010-10.00L 6010-11.00L 6010-12.00L 6010-13.00L 6010-14.00L 6010-15.00L 6010-16.00L – 6010-18.00L – 6010-20.00L

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 125

WWW.BORDO.COM.AU

PAGE 125 21/04/12 6:32 PM

MILLING CUTTERS SLOT DRILLS SHORT

GROUP SURFACE FINISH MATERIAL LENGTH TYPE PACKAGING DIA INCH SHORT 1/16 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2

PAGE 126

ENDM BRIGHT HSS-Co8 SHORT CENTRE CUTTING THREADED SINGLE

SHANK INCH

FL MM

OAL MM

FLUTES #

PACK QTY

$ EACH

PART NUMBER

1/4 1/4 1/4 1/4 3/8 3/8 1/2 1/2 1/2 5/8 5/8 1 1 1 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4

2.50 8.00 10.00 11.00 13.00 14.00 17.00 19.00 22.00 22.00 25.00 25.00 27.00 30.00 35.00 40.00 43.00 48.00 48.00 51.00 51.00

48.00 51.00 52.00 56.00 60.00 60.00 65.00 67.00 69.00 72.00 77.00 100.00 95.00 95.00 117.00 111.00 115.00 118.00 118.00 118.00 118.00

2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

18.91 21.71 23.32 23.58 35.76 36.66 43.89 47.22 55.12 65.04 83.11 137.22 139.83 178.63 237.73 267.41 297.52 356.54 410.51 445.68 496.94

6000-1/16S 6000-1/8S 6000-3/16S 6000-1/4S 6000-5/16S 6000-3/8S 6000-7/16S 6000-1/2S 6000-9/16S 6000-5/8S 6000-3/4S 6000-7/8S 6000-1S 6000-1.1/8S 6000-1.1/4S 6000-1.3/8S 6000-1.1/2S 6000-1.5/8S 6000-1.3/4S 6000-1.7/8S 6000-2S

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 126

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:32 PM

MILLING CUTTERS SLOT DRILLS LONG

GROUP SURFACE FINISH MATERIAL LENGTH TYPE PACKAGING DIA INCH LONG 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2

ENDM BRIGHT HSS-Co8 LONG CENTRE CUTTING THREADED SINGLE

SHANK INCH

FL MM

OAL MM

FLUTES #

PACK QTY

$ EACH

PART NUMBER

1/4 1/4 1/4 3/8 3/8 1/2 1/2 1/2 5/8 5/8 1 1 1 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4

11.00 13.00 16.00 19.00 22.00 22.00 25.00 29.00 32.00 38.00 42.00 44.00 48.00 51.00 54.00 57.00 64.00 64.00 64.00 64.00

64.00 70.00 76.00 79.00 83.00 89.00 95.00 102.00 108.00 121.00 140.00 159.00 159.00 159.00 159.00 159.00 159.00 159.00 159.00 159.00

2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

24.94 24.58 25.25 35.93 39.12 57.89 51.83 68.93 81.80 106.32 164.72 181.66 221.79 283.92 335.78 400.31 478.85 563.73 637.80 711.82

6000-1/8L 6000-3/16L 6000-1/4L 6000-5/16L 6000-3/8L 6000-7/16L 6000-1/2L 6000-9/16L 6000-5/8L 6000-3/4L 6000-7/8L 6000-1L 6000-1.1/8L 6000-1.1/4L 6000-1.3/8L 6000-1.1/2L 6000-1.5/8L 6000-1.3/4L 6000-1.7/8L 6000-2L

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 127

WWW.BORDO.COM.AU

PAGE 127 21/04/12 6:32 PM

MILLING CUTTERS SLOT DRILLS BALL NOSE

GROUP SURFACE FINISH MATERIAL LENGTH TYPE PACKAGING DIA MM

PAGE 128

ENDM BRIGHT HSS-Co8 SHORT / LONG CENTRE CUTTING THREADED SINGLE

ENDM BRIGHT HSS-Co8 SHORT / LONG CENTRE CUTTING PLAIN - FLATTED SINGLE

SHANK MM

FL MM

OAL MM

FLUTES #

PACK QTY

$ EACH

PART NUMBER

$ EACH

PART NUMBER

SHORT 3.00 4.00 5.00 6.00 8.00 10.00 12.00 14.00 16.00 18.00 20.00 22.00 25.00 30.00

6.00 6.00 6.00 6.00 10.00 10.00 12.00 12.00 16.00 16.00 16.00 25.00 25.00 25.00

5.00 7.00 8.00 8.00 11.00 13.00 16.00 16.00 19.00 19.00 19.00 26.00 26.00 26.00

49.00 51.00 52.00 52.00 61.00 63.00 73.00 73.00 79.00 79.00 79.00 102.00 102.00 102.00

2 2 2 2 2 2 3 2 2 2 2 2 2 2

1 1 1 1 1 1 1 1 1 1 1 1 1 1

43.22 42.55 42.55 44.66 55.70 60.04 82.88 87.54 105.44 128.70 144.74 219.02 226.85 330.27

6022-3.00S 6022-4.00S 6022-5.00S 6022-6.00S 6022-8.00S 6022-10.00S 6022-12.00S 6022-14.00S 6022-16.00S 6022-18.00S 6022-20.00S 6022-22.00S 6022-25.00S 6022-30.00S

56.50 52.76 55.74 56.14 72.07 76.00 100.57 – – – – – – –

6024-3.00S 6024-4.00S 6024-5.00S 6024-6.00S 6024-8.00S 6024-10.00S 6024-12.00S – – – – – – –

LONG 3.00 4.00 5.00 6.00 8.00 10.00 12.00 16.00 18.00 25.00 30.00

6.00 6.00 6.00 6.00 10.00 10.00 12.00 16.00 16.00 16.00 25.00

11.00 12.50 12.50 16.00 19.00 22.00 25.50 31.50 35.00 44.50 51.00

60.50 66.50 70.00 76.00 79.50 82.50 95.00 108.00 114.50 159.00 159.00

2 2 2 2 2 2 2 2 2 2 2

1 1 1 1 1 1 1 1 1 1 1

45.92 45.92 45.92 46.28 57.99 64.28 88.68 106.54 136.18 270.12 391.58

6022-3.00L 6022-4.00L 6022-5.00L 6022-6.00L 6022-8.00L 6022-10.00L 6022-12.00L 6022-16.00L 6022-18.00L 6022-25.00L 6022-30.00L

38.75 38.80 40.66 39.40 55.62 64.84 85.08 106.54 155.96 303.95 334.41

6024-3.00L 6024-4.00L 6024-5.00L 6024-6.00L 6024-8.00L 6024-10.00L 6024-12.00L 6024-16.00L 6024-18.00L 6024-25.00L 6024-30.00L

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 128

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:32 PM

MILLING CUTTERS SLOT DRILLS BALL NOSE

GROUP SURFACE FINISH MATERIAL LENGTH TYPE PACKAGING DIA INCH

ENDM BRIGHT HSS-Co8 SHORT / LONG CENTRE CUTTING THREADED SINGLE

SHANK INCH

FL MM

OAL MM

FLUTES #

PACK QTY

$ EACH

PART NUMBER

SHORT 1/8 3/16 1/4 5/16 3/8 7/16 1/2 5/8 3/4 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2

1/4 1/4 1/4 3/8 3/8 1/2 1/2 5/8 5/8 1 1 1 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4

8.00 10.00 11.00 13.00 14.00 17.00 19.00 22.00 25.00 25.00 27.00 30.00 35.00 40.00 43.00 48.00 48.00 51.00 51.00

51.00 52.00 56.00 60.00 60.00 65.00 67.00 72.00 77.00 100.00 95.00 95.00 117.00 111.00 115.00 118.00 118.00 118.00 118.00

2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

42.55 40.79 44.48 50.79 56.87 70.95 85.04 107.87 144.24 234.02 234.19 297.89 394.53 448.70 518.48 668.53 722.13 793.37 864.59

6016-1/8S 6016-3/16S 6016-1/4S 6016-5/16S 6016-3/8S 6016-7/16S 6016-1/2S 6016-5/8S 6016-3/4S 6016-7/8S 6016-1S 6016-1.1/8S 6016-1.1/4S 6016-1.3/8S 6016-1.1/2S 6016-1.5/8S 6016-1.3/4S 6016-1.7/8S 6016-2S

LONG 1/8 3/16 1/4 5/16 3/8 7/16 1/2 5/8 3/4 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2 1-3/4 2

1/4 1/4 1/4 3/8 3/8 1/2 1/2 5/8 5/8 1 1 1 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4

11.00 13.00 16.00 19.00 22.00 22.00 25.00 32.00 38.00 42.00 44.00 48.00 51.00 54.00 57.00 64.00 64.00

64.00 70.00 76.00 79.00 83.00 89.00 95.00 108.00 121.00 140.00 159.00 159.00 159.00 159.00 159.00 159.00 159.00

2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

43.50 44.21 46.56 57.27 62.76 84.82 91.83 114.80 145.42 230.95 268.22 324.94 434.16 449.65 461.36 743.26 942.50

6016-1/8L 6016-3/16L 6016-1/4L 6016-5/16L 6016-3/8L 6016-7/16L 6016-1/2L 6016-5/8L 6016-3/4L 6016-7/8L 6016-1L 6016-1.1/8L 6016-1.1/4L 6016-1.3/8L 6016-1.1/2L 6016-1.3/4L 6016-2L

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 129

WWW.BORDO.COM.AU

PAGE 129 21/04/12 6:32 PM

MILLING CUTTERS END MILLS SHORT

GROUP SURFACE FINISH MATERIAL LENGTH TYPE PACKAGING DIA MM SHORT 3.00 3.50 4.00 4.50 5.00 5.50 6.00 6.50 7.00 7.50 8.00 8.50 9.00 9.50 10.00 11.00 12.00 13.00 14.00 15.00 16.00 18.00 19.00 20.00 22.00 24.00 25.00 28.00 30.00 32.00 35.00 38.00 40.00 45.00 50.00

PAGE 130

ENDM BRIGHT HSS-Co8 SHORT END CUTTING THREADED SINGLE

ENDM BRIGHT HSS-Co8 SHORT END CUTTING PLAIN - FLATTED SINGLE

SHANK MM

FL MM

OAL MM

FLUTES #

PACK QTY

$ EACH

PART NUMBER

$ EACH

PART NUMBER

6.00 6.00 6.00 6.00 6.00 6.00 6.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 12.00 12.00 12.00 12.00 12.00 16.00 16.00 16.00 20.00 25.00 25.00 25.00 25.00 25.00 32.00 32.00 32.00 32.00 32.00 32.00

9.50 12.50 12.50 12.50 16.00 16.00 16.00 16.00 15.00 18.00 18.00 21.00 21.00 21.00 21.00 19.00 24.00 24.50 28.50 26.50 26.50 35.00 38.00 38.00 41.50 41.50 44.50 46.00 46.00 51.00 54.00 54.00 55.50 57.00 65.00

54.00 57.00 57.00 57.00 60.50 60.50 60.50 60.50 60.50 63.50 63.50 66.50 66.50 66.50 66.50 66.50 70.00 70.00 73.00 71.00 77.00 80.00 83.50 83.50 98.50 98.50 101.50 104.50 104.50 112.50 116.00 116.00 117.50 119.00 127.00

4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 6 6 6 6 6 6 6 6 6 6 8

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

20.70 20.70 21.17 21.30 21.63 21.63 21.83 30.97 28.79 29.32 29.60 30.44 30.44 30.63 30.63 39.10 39.71 46.23 49.54 56.83 56.97 67.45 72.52 87.89 122.31 124.26 126.69 168.55 186.11 207.18 231.69 288.01 347.45 444.04 505.59

6066-3.00S 6066-3.50S 6066-4.00S 6066-4.50S 6066-5.00S 6066-5.50S 6066-6.00S 6066-6.50S 6066-7.00S 6066-7.50S 6066-8.00S 6066-8.50S 6066-9.00S 6066-9.50S 6066-10.00S 6066-11.00S 6066-12.00S 6066-13.00S 6066-14.00S 6066-15.00S 6066-16.00S 6066-18.00S 6066-19.00S 6066-20.00S 6066-22.00S 6066-24.00S 6066-25.00S 6066-28.00S 6066-30.00S 6066-32.00S 6066-35.00S 6066-38.00S 6066-40.00S 6066-45.00S 6066-50.00S

21.27 – 21.74 – 22.23 – 22.39 – 30.88 – 31.75 – 32.63 – 32.87 45.39 46.02 52.92 56.61 64.42 64.55 75.71 – 97.43 134.09 – 157.94 – – – – – – – –

6070-3.00S – 6070-4.00S – 6070-5.00S – 6070-6.00S – 6070-7.00S – 6070-8.00S – 6070-9.00S – 6070-10.00S 6070-11.00S 6070-12.00S 6070-13.00S 6070-14.00S 6070-15.00S 6070-16.00S 6070-18.00S – 6070-20.00S 6070-22.00S – 6070-25.00S – – – – – – – –

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 130

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:33 PM

MILLING CUTTERS END MILLS LONG

GROUP SURFACE FINISH MATERIAL LENGTH TYPE PACKAGING DIA MM LONG 3.00 4.00 5.00 6.00 7.00 8.00 9.00 10.00 11.00 12.00 13.00 14.00 15.00 16.00 18.00 20.00

ENDM BRIGHT HSS-Co8 LONG END CUTTING THREADED SINGLE

ENDM BRIGHT HSS-Co8 LONG END CUTTING PLAIN - FLATTED SINGLE

SHANK MM

FL MM

OAL MM

FLUTES #

PACK QTY

$ EACH

PART NUMBER

$ EACH

PART NUMBER

6.00 6.00 6.00 6.00 10.00 10.00 10.00 10.00 12.00 12.00 12.00 12.00 12.00 16.00 16.00 25.00

19.00 25.50 31.50 31.50 34.00 34.00 37.00 37.00 41.50 49.50 50.00 57.00 58.50 58.50 70.00 76.00

63.50 70.00 76.00 76.00 79.50 79.50 82.50 82.50 89.00 95.00 95.00 101.50 103.00 108.50 115.00 121.50

4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

20.95 21.57 21.99 23.62 38.12 38.33 39.75 39.75 47.99 50.23 57.07 66.01 81.75 81.17 89.91 111.54

6066-3.00L 6066-4.00L 6066-5.00L 6066-6.00L 6066-7.00L 6066-8.00L 6066-9.00L 6066-10.00L 6066-11.00L 6066-12.00L 6066-13.00L 6066-14.00L 6066-15.00L 6066-16.00L 6066-18.00L 6066-20.00L

21.39 24.24 24.42 25.21 – 39.19 – 39.99 – 61.86 – 79.95 – 97.35 107.35 132.16

6070-3.00L 6070-4.00L 6070-5.00L 6070-6.00L – 6070-8.00L – 6070-10.00L – 6070-12.00L – 6070-14.00L – 6070-16.00L 6070-18.00L 6070-20.00L

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 131

WWW.BORDO.COM.AU

PAGE 131 21/04/12 6:33 PM

MILLING CUTTERS END MILLS SHORT

GROUP SURFACE FINISH MATERIAL LENGTH TYPE PACKAGING DIA INCH

PAGE 132

ENDM BRIGHT HSS-Co8 SHORT / LONG END CUTTING THREADED SINGLE

SHANK INCH

FL MM

OAL MM

FLUTES #

PACK QTY

$ EACH

PART NUMBER

SHORT 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2

1/4 1/4 1/4 3/8 3/8 1/2 1/2 1/2 5/8 5/8 1 1 1 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4

10.00 13.00 16.00 18.00 22.00 22.00 24.00 29.00 32.00 38.00 41.00 43.00 46.00 51.00 54.00 54.00 54.00 57.00 62.00 65.00

54.00 57.00 60.00 64.00 67.00 67.00 70.00 73.00 77.00 83.00 98.00 102.00 105.00 113.00 116.00 116.00 116.00 119.00 124.00 127.00

4 4 4 4 4 4 4 4 4 4 6 6 6 6 6 6 8 8 8 8

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

21.68 22.61 22.85 29.32 30.16 39.12 46.27 49.56 56.99 85.80 144.66 126.69 168.55 207.24 231.69 288.06 347.47 444.07 484.83 505.59

6060-1/8S 6060-3/16S 6060-1/4S 6060-5/16S 6060-3/8S 6060-7/16S 6060-1/2S 6060-9/16S 6060-5/8S 6060-3/4S 6060-7/8S 6060-1S 6060-1.1/8S 6060-1.1/4S 6060-1.3/8S 6060-1.1/2S 6060-1.5/8S 6060-1.3/4S 6060-1.7/8S 6060-2S

LONG 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2

1/4 1/4 1/4 3/8 3/8 1/2 1/2 1/2 5/8 5/8 1 1 1 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4

19.00 25.00 32.00 34.00 37.00 42.00 49.00 57.00 59.00 76.00 86.00 100.00 100.00 102.00 102.00 102.00 102.00 102.00 102.00 102.00

64.00 70.00 76.00 79.00 83.00 89.00 95.00 102.00 109.00 121.00 143.00 157.00 157.00 164.00 164.00 164.00 164.00 164.00 164.00 164.00

4 4 4 4 4 4 4 4 4 4 6 6 6 6 6 6 8 8 8 8

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

20.95 21.99 23.65 36.81 38.18 47.99 57.11 66.01 81.17 101.75 170.33 184.98 244.94 304.34 327.00 400.09 498.10 549.39 600.55 632.08

6060-1/8L 6060-3/16L 6060-1/4L 6060-5/16L 6060-3/8L 6060-7/16L 6060-1/2L 6060-9/16L 6060-5/8L 6060-3/4L 6060-7/8L 6060-1L 6060-1.1/8L 6060-1.1/4L 6060-1.3/8L 6060-1.1/2L 6060-1.5/8L 6060-1.3/4L 6060-1.7/8L 6060-2L

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 132

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:33 PM

MILLING CUTTERS MULTIMILLS SHORT / LONG

GROUP SURFACE FINISH MATERIAL LENGTH TYPE PACKAGING DIA MM

ENDM BRIGHT HSS-Co8 SHORT / LONG END CUTTING THREADED SINGLE

SHANK MM

FL MM

OAL MM

FLUTES #

PACK QTY

$ EACH

PART NUMBER

SHORT 3.00 4.00 5.00 6.00 8.00 10.00 12.00 13.00 14.00 15.00 16.00 18.00 19.00 20.00 22.00 25.00

6.00 6.00 6.00 6.00 10.00 10.00 12.00 12.00 12.00 12.00 16.00 16.00 16.00 16.00 25.00 25.00

9.50 12.50 16.00 16.00 18.00 21.00 24.00 24.50 28.50 26.50 26.50 35.00 38.00 38.00 41.50 44.50

54.00 57.00 60.50 60.50 63.50 66.50 70.00 70.00 73.00 71.00 77.00 80.00 83.50 83.50 98.50 101.50

3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

25.74 25.14 25.25 24.45 39.11 39.02 55.53 61.08 75.75 80.49 88.14 106.65 114.53 122.42 180.83 191.81

6036-3.00S 6036-4.00S 6036-5.00S 6036-6.00S 6036-8.00S 6036-10.00S 6036-12.00S 6036-13.00S 6036-14.00S 6036-15.00S 6036-16.00S 6036-18.00S 6036-19.00S 6036-20.00S 6036-22.00S 6036-25.00S

LONG 6.00 8.00 10.00 12.00 14.00 16.00 18.00 20.00 22.00 25.00

6.00 10.00 10.00 12.00 12.00 16.00 16.00 16.00 25.00 25.00

31.50 34.00 37.00 49.50 57.00 58.50 70.00 76.00 85.50 100.00

76.00 79.50 82.50 95.00 101.50 108.50 115.00 121.50 143.00 157.00

3 3 3 3 3 3 3 3 3 3

1 1 1 1 1 1 1 1 1 1

30.12 40.41 43.19 59.20 85.43 95.34 119.14 141.22 211.62 233.91

6036-6.00L 6036-8.00L 6036-10.00L 6036-12.00L 6036-14.00L 6036-16.00L 6036-18.00L 6036-20.00L 6036-22.00L 6036-25.00L

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 133

WWW.BORDO.COM.AU

PAGE 133 21/04/12 6:33 PM

TOOLBITS HSS-Co10 METRIC

GROUP SHAPE MATERIAL PACKAGING

TOOL SQUARE HSS-Co10 SINGLE

DIAMETER MM

OAL MM

PACK QTY

$ EACH

PART NUMBER

$ EACH

PART NUMBER

4.00 5.00 6.00 8.00 8.00 10.00 12.00 14.00

63.00 80.00 63.00 63.00 100.00 100.00 100.00 125.00

5 5 5 5 5 5 5 1

– – 11.21 – 27.78 43.39 – 59.20

– – 3803-6X63 – 3803-8X100 3803-10X100 – 3803-14X125

11.10 12.75 14.54 15.61 – 32.86 44.45 –

3813-4X63 3813-5X80 3813-6X63 3813-8X63 – 3813-10X100 3813-12X100 –

GROUP SHAPE TYPE MATERIAL PACKAGING

PAGE 134

TOOL ROUND HSS-Co10 SINGLE

TOOL BEVEL PARTING OFF BLADE HSS-Co10 SINGLE

OAL MM

HEIGHT MM

WIDTH MM

PACK QTY

$ EACH

PART NUMBER

48.94

3826-12X3

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 134

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:33 PM

TOOLBITS HSS / HSS-Co10 FRACTIONAL

GROUP SHAPE MATERIAL PACKAGING

TOOL SQUARE HSS SINGLE

TOOL ROUND HSS SINGLE

DIA MM

PITCH MM

PACK QTY

$ EACH

PART NUMBER

$ EACH

PART NUMBER

1/8 3/16 3/16 3/16 1/4 1/4 1/4 5/16 5/16 5/16 3/8 3/8 3/8 7/16 7/16 1/2 1/2 5/8 5/8 3/4 3/4 1

3 2-1/2 3 4 2-1/2 3 4 2-1/2 3 4 3 4 6 3-1/2 4 4 6 4-1/2 6 5 6 7

5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 1 1 1 1 1

– 7.84 – – 9.46 11.35 15.15 11.11 13.33 17.77 14.47 19.29 28.94 – – 22.93 34.40 38.74 51.66 79.40 – 171.71

– 3800-3/16X2.5 – – 3800-1/4X2.5 3800-1/4X3 3800-1/4X4 3800-5/16X2.5 3800-5/16X3 3800-5/16X4 3800-3/8X3 3800-3/8X4 3800-3/8X6 – – 3800-1/2X4 3800-1/2X6 3800-5/8X4.5 3800-5/8X6 3800-3/4X5 – 3800-1X7

– – – – – 5.80 7.73 – 8.39 – – 12.73 – – – 22.93 – – – – – –

– – – – – 3810-1/4X3 3810-1/4X4 – 3810-5/16X3 – – 3810-3/8X4 – – – 3810-1/2X4 – – – – – –

TOOL SQUARE HSS-Co10 SINGLE

$ EACH – 9.85 11.19 – 12.46 14.92 19.92 14.72 17.81 23.93 21.17 27.77 41.83 – 38.99 41.59 62.54 60.30 80.39 87.18 – 196.79

PART NUMBER – 3802-3/16X2.5 3802-3/16X3 – 3802-1/4X2.5 3802-1/4X3 3802-1/4X4 3802-5/16X2.5 3802-5/16X3 3802-5/16X4 3802-3/8X3 3802-3/8X4 3802-3/8X6 – 3802-7/16X4 3802-1/2X4 3802-1/2X6 3802-5/8X4.5 3802-5/8X6 3802-3/4X5 – 3802-1X7

GROUP SHAPE TYPE MATERIAL PACKAGING

$ EACH 14.88 – – 15.44 – 16.40 – – – 25.89 – 34.76 – 34.47 – 46.88 69.85 – 106.47 – 157.25 –

PART NUMBER 3812-1/8X3 – – 3812-3/16X4 – 3812-1/4X3 – – – 3812-5/16X4 – 3812-3/8X4 – 3812-7/16X3.5 – 3812-1/2X4 3812-1/2X6 – 3812-5/8X6 – 3812-3/4X6 –

TOOL BEVEL PARTING OFF BLADE HSS - Co10 SINGLE

OAL MM

HEIGHT MM

WIDTH MM

PACK QTY

$ EACH

PART NUMBER

4 - 1/2 5 6

1/2 5/8 3/4

3/32 3/32 1/8

1 1 1

47.05 58.13 80.37

3825-1/2X3/32 3825-5/8X3/32 3825-3/4X1/8

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 135

TOOL ROUND HSS-Co10 SINGLE

WWW.BORDO.COM.AU

PAGE 135 21/04/12 6:33 PM

REAMERS MTS MACHINE

GROUP MATERIAL FLUTE TYPE CUTTING DIRECTION HOLE LIMIT PACKAGING DIA MM METRIC MTS 1 3.00 3.50 4.00 4.50 5.00 5.50 6.00 6.50 7.00 7.50 8.00 8.50 9.00 9.50 10.00 10.50 11.00 11.50 12.00 12.50 13.00 13.50 14.00 MTS 2 14.50 15.00 15.50 16.00 16.50 17.00 17.50 18.00 18.50 19.00 19.50 20.00 21.00 22.00 23.00 MTS 3 24.00 25.00

PAGE 136

FL MM

OAL MM

REAM HSS 10ยบ LEFT HAND SPIRAL RIGHT HAND H7 SINGLE MTS #

PACK QTY

$ EACH

PART NUMBER

32.00 32.00 38.00 38.00 38.00 45.00 45.00 50.00 54.00 54.00 58.00 58.00 62.00 62.00 66.00 66.00 71.00 71.00 76.00 76.00 76.00 81.00 81.00

115.00 115.00 120.00 120.00 120.00 127.00 127.00 130.00 134.00 134.00 138.00 138.00 142.00 142.00 146.00 146.00 151.00 151.00 156.00 156.00 156.00 161.00 161.00

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

84.16 84.16 84.16 84.16 84.16 84.16 75.52 79.06 79.06 79.06 79.06 84.16 84.16 80.98 80.98 102.49 102.49 110.53 97.92 106.24 118.24 144.45 118.24

6301-3.00 6301-3.50 6301-4.00 6301-4.50 6301-5.00 6301-5.50 6301-6.00 6301-6.50 6301-7.00 6301-7.50 6301-8.00 6301-8.50 6301-9.00 6301-9.50 6301-10.00 6301-10.50 6301-11.00 6301-11.50 6301-12.00 6301-12.50 6301-13.00 6301-13.50 6301-14.00

81.00 81.00 87.00 87.00 87.00 87.00 93.00 93.00 93.00 93.00 100.00 100.00 100.00 107.00 107.00

181.00 181.00 187.00 187.00 187.00 187.00 193.00 193.00 193.00 193.00 200.00 200.00 200.00 207.00 207.00

2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

159.25 153.79 175.18 156.47 180.85 156.47 202.19 186.07 213.13 199.48 226.54 199.48 236.58 215.86 259.30

6301-14.50 6301-15.00 6301-15.50 6301-16.00 6301-16.50 6301-17.00 6301-17.50 6301-18.00 6301-18.50 6301-19.00 6301-19.50 6301-20.00 6301-21.00 6301-22.00 6301-23.00

115.00 242.00 115.00 242.00

3 3

1 1

272.96 284.33

6301-24.00 6301-25.00

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 136

GROUP MATERIAL FLUTE TYPE CUTTING DIRECTION HOLE LIMIT PACKAGING DIA INCH

FL MM

FRACTIONAL MTS 1 1/8 32.00 5/32 32.00 3/16 38.00 7/32 45.00 1/4 50.00 9/32 54.00 5/16 58.00 11/32 62.00 3/8 66.00 13/32 66.00 7/16 71.00 15/32 76.00 1/2 76.00 17/32 81.00 MTS 2 9/16 81.00 19/32 87.00 5/8 87.00 21/32 87.00 11/16 93.00 23/32 93.00 3/4 100.00 25/32 100.00 13/16 100.00 27/32 107.00 7/8 107.00 29/32 107.00 MTS 3 15/16 115.00 31/32 115.00 1 115.00 1-1/16 124.00 1-1/8 124.00 1-3/16 133.00 1-1/4 133.00 MTS 4 1-5/16 133.00 1-3/8 142.00 1-7/16 142.00 1-1/2 152.00 1-5/8 152.00 1-3/4 163.00 1-7/8 174.00

REAM HSS 10ยบ LEFT HAND SPIRAL RIGHT HAND H7 SINGLE

OAL MM

MTS #

PACK QTY

$ EACH

PART NUMBER

115.00 115.00 120.00 127.00 130.00 134.00 138.00 142.00 146.00 146.00 151.00 156.00 156.00 161.00

1 1 1 1 1 1 1 1 1 1 1 1 1 1

84.02 84.02 84.02 84.02 76.32 79.06 79.06 84.16 86.36 89.63 90.88 94.40 94.40 106.82

6300-1/8 6300-5/32 6300-3/16 6300-7/32 6300-1/4 6300-9/32 6300-5/16 6300-11/32 6300-3/8 6300-13/32 6300-7/16 6300-15/32 6300-1/2 6300-17/32

181.00 187.00 187.00 187.00 193.00 193.00 200.00 200.00 200.00 207.00 207.00 207.00

2 2 2 2 2 2 2 2 2 2 2 2

1 1 1 1 1 1 1 1 1 1 1 1

118.75 149.67 125.76 155.82 143.32 183.33 166.07 199.48 178.12 236.58 199.72 259.30

6300-9/16 6300-19/32 6300-5/8 6300-21/32 6300-11/16 6300-23/32 6300-3/4 6300-25/32 6300-13/16 6300-27/32 6300-7/8 6300-29/32

242.00 242.00 242.00 251.00 251.00 260.00 260.00

3 3 3 3 3 3 3

1 1 1 1 1 1 1

272.96 316.18 316.18 325.26 350.29 407.16 434.47

6300-15/16 6300-31/32 6300-1 6300-1.1/16 6300-1.1/8 6300-1.3/16 6300-1.1/4

293.00 302.00 302.00 312.00 312.00 323.00 334.00

4 4 4 4 4 4 4

1 1 1 1 1 1 1

491.30 527.73 568.62 664.19 746.09 948.55 1,157.77

6300-1.5/16 6300-1.3/8 6300-1.7/16 6300-1.1/2 6300-1.5/8 6300-1.3/4 6300-1.7/8

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:33 PM

REAMERS HAND

GROUP MATERIAL FLUTE TYPE CUTTING DIRECTION HOLE LIMIT PACKAGING

REAM HSS 10ยบ LEFT HAND SPIRAL RIGHT HAND H7 SINGLE

DIA MM

FL MM

OAL MM

PACK QTY

$ EACH

PART NUMBER

METRIC 2.00 2.50 3.00 3.50 4.00 4.50 5.00 5.50 6.00 6.50 7.00 7.50 8.00 8.50 9.00 9.50 10.00 10.50 11.00 11.50 12.00 12.50 13.00 13.50 14.00 14.50 15.00 16.00 17.00 18.00 19.00 20.00 21.00 22.00 23.00 24.00 25.00

25.00 29.00 31.00 35.00 38.00 41.00 44.00 47.00 47.00 50.00 54.00 54.00 58.00 58.00 62.00 62.00 66.00 66.00 71.00 71.00 76.00 76.00 76.00 81.00 81.00 81.00 81.00 87.00 87.00 93.00 93.00 100.00 100.00 107.00 107.00 115.00 115.00

50 58 62 71 76 81 87 93 93 100 107 107 115 115 124 124 133 133 142 142 152 152 152 163 163 163 163 175 175 188 188 201 201 215 215 231 231

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

65.26 65.26 59.37 53.90 53.90 53.90 53.90 53.90 53.90 56.87 56.87 59.81 59.37 65.26 73.69 73.69 73.69 86.36 90.30 102.24 95.78 111.12 111.12 130.80 116.24 143.77 143.77 148.29 142.84 172.64 167.16 172.64 234.29 207.69 259.30 259.30 286.59

6311-2.00 6311-2.50 6311-3.00 6311-3.50 6311-4.00 6311-4.50 6311-5.00 6311-5.50 6311-6.00 6311-6.50 6311-7.00 6311-7.50 6311-8.00 6311-8.50 6311-9.00 6311-9.50 6311-10.00 6311-10.50 6311-11.00 6311-11.50 6311-12.00 6311-12.50 6311-13.00 6311-13.50 6311-14.00 6311-14.50 6311-15.00 6311-16.00 6311-17.00 6311-18.00 6311-19.00 6311-20.00 6311-21.00 6311-22.00 6311-23.00 6311-24.00 6311-25.00

GROUP MATERIAL FLUTE TYPE CUTTING DIRECTION HOLE LIMIT PACKAGING DIA INCH

FL MM

FRACTIONAL 1/8 33.00 9/64 35.00 5/32 38.00 11/64 41.00 3/16 44.00 13/64 44.00 7/32 47.00 15/64 47.00 1/4 50.00 9/32 54.00 5/16 58.00 11/32 62.00 3/8 66.00 13/32 66.00 7/16 71.00 15/32 76.00 1/2 76.00 9/16 81.00 5/8 87.00 11/16 93.00 3/4 100.00 13/16 100.00 7/8 107.00 15/16 115.00 1 115.00

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 137

REAM HSS 10ยบ LEFT HAND SPIRAL RIGHT HAND H7 SINGLE OAL MM

PACK QTY

$ EACH

PART NUMBER

66.00 71.00 76.00 81.00 87.00 87.00 93.00 93.00 100.00 107.00 115.00 124.00 133.00 133.00 142.00 152.00 152.00 163.00 175.00 188.00 201.00 201.00 215.00 231.00 231.00

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

50.19 50.19 59.58 59.58 59.37 51.17 53.90 53.90 53.90 56.63 59.37 73.69 78.94 78.94 89.63 95.78 97.14 116.01 122.82 149.90 166.07 180.85 221.08 261.59 291.15

6310-1/8 6310-9/64 6310-5/32 6310-11/64 6310-3/16 6310-13/64 6310-7/32 6310-15/64 6310-1/4 6310-9/32 6310-5/16 6310-11/32 6310-3/8 6310-13/32 6310-7/16 6310-15/32 6310-1/2 6310-9/16 6310-5/8 6310-11/16 6310-3/4 6310-13/16 6310-7/8 6310-15/16 6310-1

WWW.BORDO.COM.AU

PAGE 137 21/04/12 6:33 PM

REAMERS CHUCKING & ADJUSTABLE

GROUP MATERIAL FLUTE TYPE CUTTING DIRECTION HOLE LIMIT PACKAGING DIA MM / INCH METRIC 4.00 4.50 5.00 5.50 6.00 7.00 8.00 9.00 10.00 11.00 12.00 13.00 FRACTIONAL 3/16 1/4 5/16 3/8 7/16 1/2

REAM HSS-CO 10ยบ LEFT HAND SPIRAL RIGHT HAND H7 SINGLE

FL MM

OAL MM

PACK QTY

$ EACH

PART NUMBER

19.00 21.00 23.00 26.00 26.00 31.00 33.00 36.00 38.00 41.00 44.00 44.00

75.00 80.00 86.00 93.00 93.00 109.00 117.00 125.00 133.00 142.00 151.00 151.00

1 1 1 1 1 1 1 1 1 1 1 1

34.06 37.42 38.63 39.40 41.33 43.32 47.30 52.18 64.99 72.87 80.70 84.68

6321-4.00 6321-4.50 6321-5.00 6321-5.50 6321-6.00 6321-7.00 6321-8.00 6321-9.00 6321-10.00 6321-11.00 6321-12.00 6321-13.00

23.00 28.00 33.00 38.00 41.00 44.00

86.00 101.00 117.00 133.00 142.00 151.00

1 1 1 1 1 1

39.40 41.33 47.30 66.96 72.87 84.68

6320-3/16 6320-1/4 6320-5/16 6320-3/8 6320-7/16 6320-1/2

GROUP MATERIAL PACKAGING RANGE INCH 1/4 - 9/32 9/32 - 5/16 5/16 - 11/32 11/32 - 3/8 3/8 - 13/32 13/32 - 7/16 7/16 - 15/32 15/32 - 17/32 17/32 - 19/32 19/32 - 21/32 21/32 - 23/32 23/32 - 25/32 25/32 - 27/32 27/32 - 15/16 15/16 - 1-1/16 1-1/16 - 1-3/16 1-3/16 - 1-11/32 1-11/32 - 1-1/2 1-1/2 - 1-13/16 1-13/16 - 2-7/32

PAGE 138

REAM HSS SINGLE RANGE MM 6.35 - 7.15 7.15 - 7.95 7.95 - 8.70 8.70 - 9.50 9.50 - 10.25 10.25 - 11.00 11.00 - 12.00 12.00 - 13.50 13.50 - 15.00 15.00 - 16.75 16.75 - 18.25 18.25 - 19.75 19.75 - 21.50 21.50 - 23.75 23.75 - 27.00 27.00 - 30.25 30.25 - 34.25 34.25 - 38.00 38.00 - 46.00 46.00 - 56.00

PACK QTY 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 138

$ EACH 138.67 138.67 138.67 138.67 142.92 142.92 145.76 145.76 148.34 154.04 173.62 184.68 198.42 214.97 245.67 276.39 342.56 403.96 588.23 961.48

PART NUMBER 6345-1/4 6345-9/32 6345-5/16 6345-11/32 6345-3/8 6345-13/32 6345-7/16 6345-15/32 6345-17/32 6345-19/32 6345-21/32 6345-23/32 6345-25/32 6345-27/32 6345-15/16 6345-1.1/16 6345-1.3/16 6345-1.11/32 6345-1.1/2 6345-1.13/16

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:33 PM

REAMERS HAND TAPER PIN

GROUP MATERIAL FLUTE TYPE INCLINATION (TAPER) PACKAGING

DIA INCH METRIC 2.00 2.50 3.00 4.00 5.00 6.00 8.00 10.00 12.00 16.00 20.00 25.00 DIA INCH

MIN DIA MM

MAX DIA MM

FL MM

OAL MM

PACK QTY

$ EACH

PART NUMBER

1.90 2.40 2.90 3.90 4.90 5.90 7.90 9.90 11.80 15.80 19.80 24.70

2.86 3.36 4.06 5.26 6.36 8.00 10.80 13.40 16.00 20.40 24.80 30.70

48.00 48.00 58.00 68.00 73.00 105.00 145.00 175.00 210.00 230.00 250.00 300.00

68.00 68.00 80.00 93.00 100.00 135.00 180.00 215.00 255.00 280.00 310.00 370.00

1 1 1 1 1 1 1 1 1 1 1 1

66.07 66.07 66.07 68.68 68.68 71.42 82.34 102.49 167.16 362.48 473.11 545.91

6331-2.00 6331-2.50 6331-3.00 6331-4.00 6331-5.00 6331-6.00 6331-8.00 6331-10.00 6331-12.00 6331-16.00 6331-20.00 6331-25.00

NUMBER SERIES

FRACTIONAL 1/16 3/32 7/64 1/8 9/64 5/32 11/64 3/16 7/32 1/4 9/32 5/16 11/32 3/8 13/32 7/16 1/2 9/16 5/8 3/4 7/8

REAM HSS STRAIGHT 1:50 SINGLE

7/0 5/0 4/0 3/0 2/0 0 1 2 3 4 5 – 6 – 7 – 8 9 – 10 11

MIN DIA MM

MAX DIA MM

FL MM

OAL MM

PACK QTY

$ EACH

PART NUMBER

1.10 1.75 2.03 2.29 2.64 2.95 3.23 3.50 4.13 4.64 5.23 5.84 6.43 7.03 7.42 8.21 9.41 10.93 12.11 14.67 17.45

1.63 2.41 2.82 3.23 3.63 4.01 4.42 4.95 5.59 6.43 7.42 8.03 8.81 9.68 10.46 11.25 12.85 14.50 16.08 19.30 22.48

25.4 31.8 38.1 44.5 47.6 50.8 52.2 69.9 69.9 85.7 104.8 104.8 114.3 127.0 146.1 146.1 165.1 171.5 190.5 222.3 241.3

50.8 57.2 63.5 69.9 73.0 76.2 88.9 101.6 101.6 117.5 142.9 142.9 152.4 165.1 190.5 190.5 209.6 215.9 235.0 273.1 204.8

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

66.07 66.07 66.07 66.07 66.07 68.68 68.68 68.68 68.68 71.42 75.52 82.34 82.34 102.49 102.49 167.16 167.16 263.89 340.72 366.24 473.11

6330-1/16 6330-3/32 6330-7/64 6330-1/8 6330-9/64 6330-5/32 6330-11/64 6330-3/16 6330-7/32 6330-1/4 6330-9/32 6330-5/16 6330-11/32 6330-3/8 6330-13/32 6330-7/16 6330-1/2 6330-9/16 6330-5/8 6330-3/4 6330-7/8

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 139

WWW.BORDO.COM.AU

PAGE 139 21/04/12 6:33 PM

BURRS CARBIDE EXPRESS CUT BULK

GROUP SURFACE FINISH MATERIAL STYLE TYPE PACKAGING

BURS BRIGHT TUNGSTEN CARBIDE RADIUS EXPRESS CUT SINGLE

BURS BRIGHT TUNGSTEN CARBIDE CYLINDRICAL EXPRESS CUT SINGLE

BURS BRIGHT TUNGSTEN CARBIDE CYLINDRICAL + END CUT EXPRESS CUT SINGLE

NEW PRODUCT RADIUS BURR With its exclusive inverted curve design, the innovative new Radius Burr now allows you to create a smooth radius on sharp corners with ease. Incorporating a unique guide system which will always centre the burr when working on edges, the Radius Burr enables significantly enhanced control to guarantee faster and easier removal of material. With this handy new tool, you’ll no longer have to worry about scoring the surface you’re working on - whatever the application. The new Radius Burr is truly a great alternative to traditional grinding or flap discs which are commonly used to finish external edges. Ideal for the production of internal and external chamfers, the New Radius Burr’s unique design gives it a versatility that makes it suitable for use across a wide range of jobs and reduces the need for consumable and tool changes, saving you time as well as money. CNC machined for consistently high quality, and offering the latest cut technology, the new Radius Burr is suitable for use on a wide range of metals, alloys and other materials including titanium, bronze, stainless steel, cast iron and brass. Manufactured and inspected to strict standards from sintered tungsten carbide, its novel design cuts better and lasts longer, giving you a more cost effective and efficient solution for difficult to machine materials. Choose the new Radius Burr for superb performance – for longer.

PAGE 140

HEAD DIA INCH RADIUS 1/2

FL INCH

OAL INCH

SHANK INCH 1/4 1/4

STYLE

PACK QTY

$ EACH

PART NUMBER

$ EACH

PART NUMBER

$ EACH

PART NUMBER

2-3/4

–

167.12

6400-37108

–

SA SA-41 SA-42 SA-43 SA-52 SA-53 SA-51 SA-51 SA SA-11 SA-14 SA-1 SA-2 SA-3 SA-4 SA-5 SA-6 SA-7 SA-9

1 1 1 1 1 1 1

– – – – – – –

2 2 2 2-1/2 2-1/2 2-3/4 2-3/4 2-3/4 2-3/4 2-3/4

1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4

1 1 1 1 1 1 1 1 1 1

– – – – – – – – – –

20.12 20.12 20.12 48.50 48.50 32.99 32.99 – 33.85 33.85 36.70 44.28 47.61 68.93 74.25 93.67 139.28 194.80

6400-95013 6400-95014 6400-95016 6400-95024 6400-95026 6400-95020 6400-95022 – 6400-95003 6400-95005 6400-95000 6400-95006 6400-95008 6400-95011 6400-95018 6400-95028 6400-95030 6400-95032

– – – – – – – – – – – – – – – – – –

CYLINDRICAL WITH END CUT 1/4 3/16 1-7/16 1/4 1/2 1-3/4 CYLINDRICAL WITH END CUT 1/8 1/2 2 3/16 5/8 2 1/4 5/8 2 5/16 3/4 2-1/2 3/8 3/4 2-1/2 7/16 1 2-3/4 1/2 1 2-3/4 5/8 1 2-3/4 3/4 1 2-3/4

1/8 1/8 1/8 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4

SB SB-51 SB-51 SB SB-11 SB-14 SB-1 SB-2 SB-3 SB-4 SB-5 SB-6 SB-7

1 1

– –

1 1 1 1 1 1 1 1 1

– – – – – – – – –

– 32.99 32.99 – 36.57 36.57 39.67 48.66 52.46 76.02 81.81 102.78 153.23

– 6400-95051 6400-95052 – 6400-95037 6400-95039 6400-95034 6400-95040 6400-95042 6400-95044 6400-95048 6400-95054 6400-95055

CYLINDRICAL 1/16 1/4 3/32 7/16 1/8 9/16 5/32 1/2 3/16 1/2 1/4 3/16 1/4 1/2 CYLINDRICAL 1/8 1/2 3/16 5/8 1/4 5/8 5/16 3/4 3/8 3/4 7/16 1 1/2 1 5/8 1 3/4 1 1 1

1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-7/16 1-1/2

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 140

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:34 PM

BURRS CARBIDE EXPRESS CUT BULK

GROUP SURFACE FINISH MATERIAL STYLE TYPE PACKAGING

BURS BRIGHT TUNGSTEN CARBIDE CYLINDRICAL BALL NOSE EXPRESS CUT SINGLE

HEAD DIA FL OAL INCH INCH INCH CYLINDRICAL BALL NOSE 3/32 7/16 1-1/2 1/8 9/16 1-1/2 5/32 1/2 1-1/2 3/16 1/2 1-1/2 1/4 1/2 1-3/4 CYLINDRICAL BALL NOSE 1/8 1/2 2 3/16 5/8 2 1/4 5/8 2 5/16 3/4 2-1/2 3/8 3/4 2-1/2 7/16 1 2-3/4 1/2 1 2-3/4 5/8 1 2-3/4 3/4 1 2-3/4 BALL 3/32 1/8 3/16 1/4 BALL 1/8 3/16 1/4 5/16 3/8 7/16 1/2 5/8 3/4 1 OVAL 1/8 3/16 1/4 OVAL 1/4 3/8 1/2 5/8 3/4

– – – –

1-1/2 1-1/2 1-1/2 1-15/32

– – – – – – – – – –

2 2 2 2-1/32 2-5/64 2-9/64 2-13/64 2-5/8 2-7/16 2-11/16

7/32 9/32 3/8

1-1/2 1-1/2 1-5/8

3/8 5/8 7/8 1 1

2 2-3/8 2-5/8 2-3/4 2-3/4

SHANK INCH 1/8 1/8 1/8 1/8 1/8 1/8 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4

STYLE

1/8 1/8 1/8 1/8 1/8 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4

SD SD-41 SD-42 SD-53 SD-51 SD SD-11 SD-14 SD-1 SD-2 SD-3 SD-4 SD-5 SD-6 SD-7 SD-9

1/8 1/8 1/8 1/8 1/4 1/4 1/4 1/4 1/4 1/4

SE SE-41 SE-53 SE-51 SE SE-1 SE-3 SE-5 SE-6 SE-7

SC SC-41 SC-42 SC-52 SC-53 SC-51 SC SC-11 SC-14 SC-1 SC-2 SC-3 SC-4 SC-5 SC-6 SC-7

BURS BRIGHT TUNGSTEN CARBIDE BALL EXPRESS CUT SINGLE

PACK QTY

$ EACH

PART NUMBER

$ EACH

PART NUMBER

$ EACH

PART NUMBER

1 1 1 1 1

20.12 20.12 48.50 48.50 32.99

6400-95068 6400-95070 6400-95077 6400-95079 6400-95074

– – – – –

1 1 1 1 1 1 1 1 1

39.39 39.39 42.64 48.19 52.94 75.66 83.37 104.81 150.50

6400-95058 6400-95061 6400-95056 6400-95062 6400-95065 6400-95066 6400-95072 6400-95081 6400-95082

– – – – – – – – –

1 1 1

– – – –

20.12 20.12 48.50 32.99

6400-95206 6400-95208 6400-95214 6400-95211

– – – –

1 1 1 1 1 1 1 1 1

– – – – – – – – – –

39.20 39.20 39.20 38.84 43.45 50.33 58.72 72.71 100.43 172.41

6400-95196 6400-95197 6400-95194 6400-95199 6400-95201 6400-95204 6400-95209 6400-95216 6400-95218 6400-95219

– – – – – – – – – –

1 1 1

– – –

20.12 48.50 32.99

6400-95162 6400-95169 6400-95166

1 1 1 1 1

– – – – –

47.96 52.94 77.56 107.89 144.77

6400-95159 6400-95161 6400-95164 6400-95170 6400-95173

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 141

BURS BRIGHT TUNGSTEN CARBIDE OVAL EXPRESS CUT SINGLE

WWW.BORDO.COM.AU

EXPRESS CUT BURRS (Double Cut Burrs) Express Cut Burrs are general purpose burrs designed for rapid stock removal and improved operator control. Chip size is reduced and lower tool speeds can be used compared with standard cut burrs. Express Cut Burrs are ideal for used in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite. USAGE s )T MAY BE NECESSARY to alter the running speeds from those shown in the speed chart in order to achieve optimum performance. s (ARDER MATERIALS require slower running speeds. s 3MALLER BURRS require faster running speeds. s ,ONG SHANK BURRS require slower speeds for safety reasons. s !PPLY CONSTANT movement and light pressure when using the burr. s 2UNNING BELOW THE optimum speed will cause chipping. s 2UNNING ABOVE optimum speed will cause premature tooth wear. s !LLOWING THE BURR to become too hot may cause the braze to soften, and cause the head to become detached from the shank. s 5SING TOOLS AND collets which have become worn will cause chipping. s $O NOT SINK THE BURR for more than one third of its periphery.

PAGE 141 21/04/12 6:34 PM

BURRS CARBIDE EXPRESS CUT BULK

GROUP SURFACE FINISH MATERIAL STYLE TYPE PACKAGING

PAGE 142

BURS BRIGHT TUNGSTEN CARBIDE TREE RADIUS NOSE EXPRESS CUT SINGLE

HEAD DIA FL INCH INCH TREE RADIUS NOSE 1/8 1/4 1/8 1/2 3/16 1/2 1/4 1/2 TREE RADIUS NOSE 1/4 5/8 3/8 3/4 7/16 1 1/2 1 1/2 3/4 5/8 1 3/4 1-1/4 3/4 1 3/4 1-/1/2 TREE POINTED NOSE 1/8 1/4 1/8 5/16 1/8 3/8 1/8 1/2 3/16 1/2 1/4 1/2 TREE POINTED NOSE 1/4 5/8 5/16 3/4 3/8 3/4 1/2 3/4 1/2 1 5/8 1 3/4 1 FLAME 1/8 3/16 FLAME 5/16 1/2 5/8 3/4

OAL INCH 1-1/2 1-1/2 1-1/2 1-3/4 2 2-1/2 2-3/4 2-3/4 2-1/2 2-3/4 3 2-3/4 3-1/4

1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-3/4 2 2-1/2 2-1/2 2-1/2 2-3/4 2-3/4 2-3/4

1/4 3/8

1-1/2 1-1/2

3/4 1-1/4 1-7/16 1-5/8

2-1/2 3 3-3/16 3-3/8

SHANK INCH 1/8 1/8 1/8 1/8 1/8 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4

STYLE

1/8 1/8 1/8 1/8 1/8 1/8 1/8 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4

SG SG-41 SG-42 SG-43 SG-44 SG-53 SG-51 SG SG-1 SG-2 SG-3 SG-13 SG-5 SG-6 SG-7

1/8 1/8 1/8 1/4 1/4 1/4 1/4 1/4

SH SH-41 SH-53 SH SH-2 SH-5 SH-6 SH-7

SF SF-41 SF-42 SF-53 SF-51 SF SF-1 SF-3 SF-4 SF-5 SF-13 SF-6 SF-14 SF-7 SF-15

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 142

BURS BRIGHT TUNGSTEN CARBIDE TREE POINTED NOSE EXPRESS CUT SINGLE

BURS BRIGHT TUNGSTEN CARBIDE FLAME EXPRESS CUT SINGLE

PACK QTY

$ EACH

PART NUMBER

$ EACH

PART NUMBER

$ EACH

PART NUMBER

1 1 1 1

20.12 20.12 48.50 32.99

6400-95096 6400-95098 6400-95104 6400-95102

– – – –

1 1 1 1 1 1 1 1

44.53 51.87 72.12 76.76 76.76 134.84 175.38 139.28 205.81

6400-95085 6400-95092 6400-95094 6400-95100 6400-95087 6400-95107 6400-95089 6400-95108 6400-95091

– – – – – – – – –

1 1 1 1 1 1

– – – – – –

20.12 20.12 20.12 20.12 48.50 32.99

6400-95119 6400-95121 6400-95122 6400-95125 6400-95131 6400-95128

– – – – – –

1 1 1 1 1 1 1

– – – – – – –

44.53 49.97 55.31 75.20 75.20 104.68 139.28

6400-95110 6400-95115 6400-95117 6400-95113 6400-95126 6400-95133 6400-95135

– – – – – – –

1 1

– –

20.12 48.50

6400-95223 6400-95227

1 1 1 1

– – – –

54.35 111.06 153.35 194.80

6400-95221 6400-95225 6400-95230 6400-95232

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:34 PM

BURRS CARBIDE EXPRESS CUT BULK

GROUP SURFACE FINISH MATERIAL STYLE TYPE PACKAGING

BURS BRIGHT TUNGSTEN CARBIDE 14º INCLUDED ANGLE EXPRESS CUT SINGLE

HEAD DIA FL ANGLE OAL INCH INCH DEG. INCH 14º INCLUDED ANGLE 1/8 3/8 1-1/2 8º 1/8 1/2 1-1/2 8º 3/16 1/2 1-1/2 14º 14º INCLUDED ANGLE 1/4 5/8 2 14º 5/16 7/8 2-3/4 14º 3/8 1-1/16 2-15/16 14º 1/2 1-1/8 3 14º 5/8 1-5/16 3-3/16 14º 3/4 1-1/2 3-3/8 14º POINTED CONE 1/8 3/8 1/8 7/16 1/8 5/8 3/16 1/2 1/4 1/2 POINTED CONE 1/4 1/2 1/4 3/4 1/4 1 3/8 5/8 1/2 7/8 5/8 1 INVERTED TAPER 1/8 3/16 3/16 1/4 1/4 1/4 INVERTED TAPER 1/4 5/16 1/2 1/2

1-1/2 1-1/2 1-1/2 1-1/2 1-7/8

12º 14º 7º 16º 22º

2 2 2 2-1/2 2-3/4 2-7/8

22º 14º 10º 28º 28º 31º

1-1/2 1-1/2 1-1/2

10º 10º 10º

2 2-1/4

10º 16º

SHANK INCH 1/8 1/8 1/8 1/8 1/4 1/4 1/4 1/4 1/4 1/4 1/4

STYLE

1/8 1/8 1/8 1/8 1/8 1/8 1/4 1/4 1/4 1/4 1/4 1/4 1/4

SM SM-41 SM-42 SM-43 SM-53 SM-51 SM SM-1 SM-2 SM-3 SM-4 SM-5 SM-6

1/8 1/8 1/8 1/8 1/4 1/4 1/4

SN SN-42 SN-53 SN-51 SN SN-1 SN-3

SL SL-41 SL-42 SL-53 SC SL-1 SL-2 SL-3 SL-4 SL-6 SL-7

BURS BRIGHT TUNGSTEN CARBIDE POINTED CONE EXPRESS CUT SINGLE

PACK QTY

$ EACH

PART NUMBER

$ EACH

PART NUMBER

$ EACH

PART NUMBER

1 1 1

20.12 20.12 48.50

6400-95183 6400-95184 6400-95186

– – –

1 1 1 1 1 1

45.59 55.18 66.32 81.01 159.39 210.31

6400-95174 6400-95177 6400-95179 6400-95180 6400-95189 6400-95190

– – – – – –

1 1 1 1 1

– – – – –

20.12 20.12 20.12 48.50 32.99

6400-95145 6400-95146 6400-95148 6400-95154 6400-95153

– – – – –

1 1 1 1 1 1

– – – – – –

39.88 45.59 44.92 66.40 83.19 111.01

6400-95136 6400-95138 6400-95141 6400-95143 6400-95151 6400-95156

– – – – – –

1 1 1

– – –

20.12 48.50 32.99

6400-95237 6400-95242 6400-95239

1 1

– –

43.45 71.09

6400-95233 6400-95243

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 143

BURS BRIGHT TUNGSTEN CARBIDE INVERTED TAPER EXPRESS CUT SINGLE

WWW.BORDO.COM.AU

PAGE 143 21/04/12 6:34 PM

BURRS CARBIDE NON-FERROUS BULK

GROUP SURFACE FINISH MATERIAL STYLE TYPE PACKAGING

NON-FERROUS CUT BURRS Non-Ferrous Cut Burrs are for use on non-ferrous and non-metallic materials such as aluminium, brass, copper, bronze, coarse plastic, hard rubber, reinforced plastic and fibreglass composites. They are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging. USAGE s )T MAY BE NECESSARY to alter the running speeds from those shown in the speed chart in order to achieve optimum performance. s (ARDER MATERIALS require slower running speeds. s 3MALLER BURRS require faster running speeds. s ,ONG SHANK BURRS require slower speeds for safety reasons. s !PPLY CONSTANT movement and light pressure when using the burr. s 2UNNING BELOW THE optimum speed will cause chipping. s 2UNNING ABOVE optimum speed will cause premature tooth wear. s !LLOWING THE BURR to become too hot may cause the braze to soften, and cause the head to become detached from the shank. s 5SING TOOLS AND collets which have become worn will cause chipping. s $O NOT SINK THE BURR for more than one third of its periphery.

BURS BRIGHT TUNGSTEN CARBIDE CYLINDRICAL NON FERROUS CUT SINGLE

HEAD DIA FL INCH INCH CYLINDRICAL 1/4 3/4 3/8 3/4 1/2 1 5/8 1 3/4 1

SHANK INCH 1/4 1/4 1/4 1/4 1/4 1/4

CYLINDRICAL WITH BALL NOSE 1/4 3/4 2 3/8 3/4 2-1/2 1/2 1 2-3/4 5/8 1 2-3/4 3/4 1 2-3/4 BALL 1/4 3/8 1/2 5/8

– – – –

OAL INCH 2 2-1/2 2-3/4 2-3/4 2-3/4

2 2-5/64 2-13/64 2-5/16

OAL INCH

5/8 7/8 1

TREE RADIUS NOSE 1/4 3/4 3/8 3/4 1/2 1 5/8 1 14º INCLUDED ANGLE 3/8 1-1/16 1/2 1-1/8 5/8 1-5/16

PAGE 144

$ EACH

PART NUMBER

$ EACH

PART NUMBER

$ EACH

PART NUMBER

SA SA-1NF SA-3NF SA-5NF SA-6NF SA-7NF

1 1 1 1 1

46.01 68.98 101.10 123.97 170.20

6401-95289 6401-95293 6401-95299 6401-95305 6401-95311

– – – – –

1/4 1/4 1/4 1/4 1/4 1/4

SC SC-1NF SC-3NF SC-5NF SC-6NF SC-7NF

1 1 1 1 1

– – – – –

51.41 68.98 101.10 154.18 211.47

6401-95290 6401-95294 6401-95300 6401-95306 6401-95312

– – – – –

1/4 1/4 1/4 1/4 1/4

SD SD-1NF SD-3NF SD-5NF SD-6NF

1 1 1 1

– – – –

50.68 54.84 81.29 146.94

6401-95291 6401-95295 6401-95301 6401-95307

OVAL

FL INCH

2-3/8 2-5/8 2-3/4

SHANK INCH 1/4 1/4 1/4 1/4

2 2-1/2 2-3/4 2-3/4

2-15/16 3 3-3/16

TREE RADIUS NOSE

14º INCLUDED ANGLE

PACK QTY

$ EACH

PART NUMBER

$ EACH

PART NUMBER

$ EACH

PART NUMBER

SE SE-3NF SE-5NF SE-6NF

1 1 1

74.65 91.87 165.75

6401-95296 6401-95302 6401-95308

– – –

1/4 1/4 1/4 1/4 1/4

SF SF-1NF SF-3NF SF-5NF SF-6NF

1 1 1 1

– – – –

51.41 72.90 102.36 146.94

6401-95292 6401-95297 6401-95303 6401-95309

– – – –

1/4 1/4 1/4 1/4

SL SL-3NF SL-4NF SL-6NF

1 1 1

– – –

93.48 128.91 234.55

6401-95298 6401-95304 6401-95310

STYLE

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 144

BURS BRIGHT TUNGSTEN CARBIDE BALL NON FERROUS CUT SINGLE

PACK QTY

STYLE

HEAD DIA INCH OVAL 3/8 1/2 5/8

BURS BRIGHT TUNGSTEN CARBIDE CYLINDRICAL BALL NOSE NON FERROUS CUT SINGLE

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:34 PM

BURRS CARBIDE EXTENDED BULK

GROUP SURFACE FINISH MATERIAL STYLE TYPE PACKAGING

HEAD DIA INCH CYLINDRICAL 1/4 3/8 1/2

BURS BRIGHT TUNGSTEN CARBIDE CYLINDRICAL EXPRESS CUT SINGLE

FL INCH

OAL INCH

SHANK INCH 1/4 1/4 1/4 1/4

5/8 3/4 1

6-5/8 6-3/4 7

CYLINDRICAL WITH BALL NOSE 1/4 5/8 6-5/8 3/8 3/4 6-3/4 1/2 1 7 BALL 1/4 3/8 1/2

– – –

6-13/64 6-21/64 2-29/64

$ EACH

PART NUMBER

$ EACH

PART NUMBER

$ EACH

PART NUMBER

SA SA-1L6 SA-3L6 SA-5L6

1 1 1

52.00 73.25 114.45

6402-95247 6402-95249 6402-95251

– – –

1/4 1/4 1/4 1/4

SC SC-1L6 SC-3L6 SC-5L6

1 1 1

– – –

60.57 81.60 128.40

6402-95253 6402-95255 6402-95257

– – –

1/4 1/4 1/4 1/4

SD SD-1L6 SD-3L6 SD-5L6

1 1 1

– – –

55.85 67.15 90.44

6402-95259 6402-95261 6402-95263

TREE RADIUS NOSE

14° INCLUDED ANGLE 1/4 5/8 3/8 1-1/16 1/2 1-1/8

6-5/8 6-3/4 7

SHANK INCH 1/4 1/4 1/4 1/4

6-5/8 7-3/16 7-1/4

1/4 1/4 1/4 1/4

OAL INCH

14º INCLUDED ANGLE

PACK QTY

$ EACH

PART NUMBER

$ EACH

PART NUMBER

SF SF-1L6 SF-3L6 SF-5L6

1 1 1

63.14 80.01 118.00

6402-95265 6402-95267 6402-95269

– – –

SL SL-1L6 SL-3L6 SL-4L6

1 1 1

– – –

64.68 101.94 124.91

6402-95271 6402-95273 6402-95275

STYLE

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 145

BURS BRIGHT TUNGSTEN CARBIDE BALL EXPRESS CUT SINGLE

PACK QTY

STYLE

HEAD DIA FL INCH INCH TREE RADIUS NOSE 1/4 5/8 3/8 3/4 1/2 1

BURS BRIGHT TUNGSTEN CARBIDE CYLINDRICAL BALL NOSE EXPRESS CUT SINGLE

WWW.BORDO.COM.AU

PAGE 145 21/04/12 6:34 PM

BURRS CARBIDE SETS

GROUP SURFACE FINISH MATERIAL SHANK DIAMETER TYPE PACKAGING

BURS BRIGHT TUNGSTEN CARBIDE 1/4" EXPRESS CUT* SET

$ SET 372.93 –

SET TYPE #3 – 1/4" CUT DIAMETER BURRS, 8 PCS #4 – 1/2" CUT DIAMETER BURRS, 8 PCS SET CONTENTS

HEAD DIA INCH 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4

SA-1 SC-1 SD-1 SE-1 SF-1 SG-1 SL-1 SM-2

PART NUMBER 6403-3 – DESCRIPTION CYLINDRICAL CYLINDRICAL BALL BALL OVAL TREE RADIUS TREE POINTED 14º INCLUDED ANGLE POINTED CONE

$ SET 458.48 –

SET TYPE #10 – AUTOMOTIVE, 8 PCS* #11 – 3/8" CUT DIAMETER BURRS, 8 PCS SET CONTENTS

STYLE

HEAD DIA INCH 1/4 3/8 1/2 1/4 1/4 3/8 3/8 3/8

STYLE

BURS BRIGHT TUNGSTEN CARBIDE 1/4" EXPRESS CUT SET

PART HEAD DIA NUMBER INCH 6400-95000 1/2 6400-95056 1/2 6400-95194 1/2 6400-95159 1/2 6400-95085 1/2 6400-95110 1/2 6400-95174 1/2 6400-95138 1/2

PART NUMBER 6403-10 – DESCRIPTION

PART HEAD DIA NUMBER INCH SA-1 CYLINDRICAL 6400-95000 3/8 SB-3 CYLINDRICAL END CUT 6400-95042 3/8 SB-5 CYLINDRICAL END CUT 6400-95048 3/8 SC-1 CYLINDRICAL BALL 6400-95056 3/8 SD-1 BALL 6400-95194 3/8 SE-3 OVAL 6400-95161 3/8 SF-3 TREE RADIUS 6400-95092 3/8 SE-3NF OVAL – NON-FERROUS 6401-95296 3/8

$ SET – 636.27 STYLE SA-5 SC-5 SD-5 SE-5 SF-5 SG-5 SL-4 SM-5

$ SET – 467.91 STYLE

PART NUMBER – 6403-4 DESCRIPTION CYLINDRICAL CYLINDRICAL BALL BALL OVAL TREE RADIUS TREE POINTED 14º INCLUDED ANGLE POINTED CONE

PART NUMBER 6400-95000 6400-95056 6400-95194 6400-95159 6400-95085 6400-95110 6400-95174 6400-95138

PART NUMBER – 6403-11 DESCRIPTION

PART NUMBER SB-3 CYLINDRICAL END CUT 6400-95042 SC-3 CYLINDRICAL BALL 6400-95065 SD-3 BALL 6400-95201 SE-3 OVAL 6400-95161 SF-3 TREE RADIUS 6400-95092 SG-3 TREE POINTED 6400-95117 SL-3 14º INCLUDED ANGLE 6400-95179 SM-4 POINTED CONE 6400-95143

* #10 Set Automotive contains 7 x Express Cut Burrs and 1 x Non-Ferrous Burr

PAGE 146

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 146

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:34 PM

BURRS CARBIDE SETS

GROUP SURFACE FINISH MATERIAL SHANK DIAMETER TYPE PACKAGING

BURS BRIGHT TUNGSTEN CARBIDE 1/4" NON FERROUS CUT SET

BURS BRIGHT TUNGSTEN CARBIDE 1/4" EXPRESS CUT SET

NEW SET

$ SET 643.86 –

SET TYPE #12 – NON-FERROUS BURRS, 8 PCS #5 – EXPRESS CUT BURRS, 5 PCS SET CONTENTS

HEAD DIA INCH 1/4 3/8 3/8 3/8 3/8 3/8 1/2 1/2

STYLE SA-1NF SA-3NF SC-3NF SD-3NF SE-3NF SF-3NF SF-5NF SL-4NF

PART NUMBER 6403-12 – DESCRIPTION CYLINDRICAL CYLINDRICAL CYLINDRICAL BALL BALL OVAL TREE RADIUS TREE RADIUS 14º INCLUDED ANGLE

PART HEAD DIA NUMBER INCH 6401-95289 3/8 6401-95293 3/8 6401-95294 1/2 6401-95295 3/8 6401-95296 1/2 6401-95297 – 6401-95303 – 6401-95304 –

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 147

$ SET – 317.39 STYLE SB-3 SC-3 SC-5 SF-3 SF-5

– – –

PART NUMBER – 6403-5 DESCRIPTION

PART NUMBER CYLINDRICAL END CUT 6400-95042 CYLINDRICAL BALL 6400-95065 CYLINDRICAL BALL 6400-95072 TREE RADIUS 6400-95092 TREE RADIUS 6400-95100

– – –

WWW.BORDO.COM.AU

PAGE 147 21/04/12 6:34 PM

BURRS CARBIDE MERCHANDISERS

GROUP SURFACE FINISH MATERIAL SHANK DIAMETER TYPE PACKAGING

MERCHANDISER TYPE D2 BURR MERCHANDISER – 22 PCS D3 BURR MERCHANDISER – 50 PCS MERCHANDISER CONTENTS

PAGE 148

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 148

BURS BRIGHT TUNGSTEN CARBIDE 1/4" EXPRESS CUT & NON FERROUS CUT BENCH MERCHANDISER

$ MERCHANDISER 1,367.78 – QTY EACH 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

STYLE SB-1 SB-3 SB-5 SC-1 SC-3 SC-5 SD-1 SD-3 SE-3 SE-5 SF-1 SF-3 SF-5 SG-3 SG-5 SH-2 SH-5 SL-3 SL-4 SN-1 SC-3NF SF-3NF

PART NUMBER 6404-D2 – PART NUMBER 6400-95034 6400-95042 6400-95048 6400-95056 6400-95065 6400-95072 6400-95194 6400-95201 6400-95161 6400-95164 6400-95085 6400-95092 6400-95100 6400-95117 6400-95126 6400-95221 6400-95225 6400-95179 6400-95180 6400-95233 6401-95294 6401-95297

BURS BRIGHT TUNGSTEN CARBIDE 1/4" EXPRESS CUT & NON FERROUS CUT BENCH MERCHANDISER

$ MERCHANDISER – 3,204.88 QTY EACH 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

STYLE SA-1 SA-2 SA-3 SA-5 SA-6 SB-1 SB-2 SB-3 SB-5 SB-6 SC-1 SC-2 SC-3 SC-5 SC-6 SH-2 SH-5 SD-1 SD-2 SD-3 SD-5 SE-1 SE-3 SE-5 SF-1 SF-3 SF-5 SF-6 SG-1 SG-2 SG-3 SG-5 SL-1 SL-2 SL-3 SL-4 SM-1 SM-3 SM-4 SM-5 SN-1 SA-1NF SA-3NF SC-1NF SC-3NF SD-3NF SE-3NF SF-3NF SF-5NF SL-4NF

PART NUMBER – 6404-D3 PART NUMBER 6400-95000 6400-95006 6400-95008 6400-95018 6400-95028 6400-95034 6400-95040 6400-95042 6400-95048 6400-95054 6400-95056 6400-95062 6400-95065 6400-95072 6400-95081 6400-95221 6400-95225 6400-95194 6400-95199 6400-95201 6400-95209 6400-95159 6400-95161 6400-95164 6400-95085 6400-95092 6400-95100 6400-95107 6400-95110 6400-95115 6400-95117 6400-95126 6400-95174 6400-95177 6400-95179 6400-95180 6400-95136 6400-95141 6400-95143 6400-95151 6400-95233 6401-95289 6401-95293 6401-95290 6401-95294 6401-95295 6401-95296 6401-95297 6401-95303 6401-95304

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:34 PM

BURRS CARBIDE MERCHANDISERS

GROUP SURFACE FINISH MATERIAL SHANK DIAMETER TYPE PACKAGING

MERCHANDISER TYPE D4 BURR MERCHANDISER – 100 PCS D5 BURR MERCHANDISER – 200 PCS MERCHANDISER CONTENTS

BURS BRIGHT TUNGSTEN CARBIDE 1/4" EXPRESS CUT & NON FERROUS CUT BENCH MERCHANDISER

$ MERCHANDISER 6,409.76 – QTY EACH 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

PART NUMBER 6404-D4 – PART NUMBER 6400-95000 6400-95006 6400-95008 6400-95018 6400-95028 6400-95034 6400-95040 6400-95042 6400-95048 6400-95054 6400-95056 6400-95062 6400-95065 6400-95072 6400-95081 6400-95221 6400-95225 6400-95194 6400-95199 6400-95201 6400-95209 6400-95159 6400-95161 6400-95164 6400-95085 6400-95092 6400-95100 6400-95107 6400-95110 6400-95115 6400-95117 6400-95126 6400-95174 6400-95177 6400-95179 6400-95180 6400-95136 6400-95141 6400-95143 6400-95151 6400-95233 6401-95289 6401-95293 6401-95290 6401-95294 6401-95295 6401-95296 6401-95297 6401-95303 6401-95304

BURS BRIGHT TUNGSTEN CARBIDE 1/4" EXPRESS CUT & NON FERROUS CUT BENCH MERCHANDISER

$ MERCHANDISER – 12,819.52 QTY EACH 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 149

PART NUMBER – 6404-D5 PART NUMBER 6400-95000 6400-95006 6400-95008 6400-95018 6400-95028 6400-95034 6400-95040 6400-95042 6400-95048 6400-95054 6400-95056 6400-95062 6400-95065 6400-95072 6400-95081 6400-95221 6400-95225 6400-95194 6400-95199 6400-95201 6400-95209 6400-95159 6400-95161 6400-95164 6400-95085 6400-95092 6400-95100 6400-95107 6400-95110 6400-95115 6400-95117 6400-95126 6400-95174 6400-95177 6400-95179 6400-95180 6400-95136 6400-95141 6400-95143 6400-95151 6400-95233 6401-95289 6401-95293 6401-95290 6401-95294 6401-95295 6401-95296 6401-95297 6401-95303 6401-95304

WWW.BORDO.COM.AU

PAGE 149 21/04/12 6:34 PM

HOLESAWS BI-METAL HANG SELL

s 48mm (1-7/8”) depth of cut. s MM 3/16”) thick heavy-duty backing plate eliminates need for drive plate. APPLICATIONS s Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas. s Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications. s Use in steel, aluminium, brass, cast iron, plastic, wood and a wide variety of other materials. s #AN BE USED IN stainless steel with use of a cutting lubricant, reduced spindle speed and sufficient feed pressure to produce chips. Repetition hole cutting in stainless steel is best suited to Bordo XP and XP2 hole saws.

PAGE 150

$ EACH

PART NUMBER

OLD PART NUMBER

14.00 16.00 17.00 19.00 20.00 21.00 22.00 24.00 25.00 27.00 29.00 30.00 32.00 33.00 35.00 37.00 38.00 40.00 41.00 43.00 44.00 45.00 46.00 48.00 50.00 51.00 52.00 54.00 55.00 57.00 59.00 60.00 64.00 65.00 67.00 68.00 70.00 73.00 75.00 76.00 79.00

9/16 5/8 11/16 3/4 – 13/16 7/8 15/16 1 1-1/16 1-1/8 1-3/16 1-1/4 1-5/16 1-3/8 1-7/16 1-1/2 1-9/16 1-5/8 1-11/16 1-3/4 – 1-13/16 1-7/8 – 2 2-1/16 2-1/8 – 2-1/4 2-5/16 2-3/8 2-1/2 2-9/16 2-5/8 – 2-3/4 2-7/8 – 3 3-1/8

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

25.70 19.23 19.23 19.23 19.23 19.23 19.23 20.35 21.60 21.60 21.88 22.37 22.96 23.47 24.72 24.72 24.95 25.95 25.95 27.48 28.48 28.59 28.68 29.40 29.40 29.40 33.31 33.31 33.31 33.31 33.77 33.87 35.97 39.26 39.18 39.35 39.71 40.45 41.25 41.48 42.37

7010-14 7010-16 7010-17 7010-19 7010-20 7010-21 7010-22 7010-24 7010-25 7010-27 7010-29 7010-30 7010-32 7010-33 7010-35 7010-37 7010-38 7010-40 7010-41 7010-43 7010-44 7010-45 7010-46 7010-48 7010-50 7010-51 7010-52 7010-54 7010-55 7010-57 7010-59 7010-60 7010-64 7010-65 7010-67 7010-68 7010-70 7010-73 7010-75 7010-76 7010-79

7010-509 7010-510 7010-511 7010-512 7010-M513 7010-513 7010-514 7010-515 7010-516 7010-517 7010-518 7010-519 7010-520 7010-521 7010-522 7010-523 7010-524 7010-525 7010-526 7010-527 7010-528 7010-M528 7010-529 7010-530 Ø 7010-M532 7010-532 7010-533 7010-534 7010-M534 7010-536 7010-537 7010-538 7010-540 7010-541 7010-542 7010-M542 7010-544 7010-546 7010-M548 7010-548 7010-550

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 150

54 – 60 mm

83 mm

s 4/6 variable tooth configuration.

PACK QTY

60 mm

FEATURES

DIAMETER INCH EQUIV.

63 mm

Bordo hole saws are premium quality, general purpose saws suitable for a wide variety of materials and applications. The high-speed steel cutting edge provides shock resistant teeth and resists tooth strippage. 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration.

DIAMETER MM

40 mm

BI-METAL HOLESAWS

48 mm

65 mm

29 mm

70 mm

BMHS Vx BI-METAL M3 EDGE 2 PIECE; 4/6 VARIABLE PITCH 48MM HANG SELL 41 – 48 mm

GROUP MATERIAL TYPE INTERNAL DEPTH PACKAGING

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:34 PM

HOLESAWS BI-METAL HANG SELL

83 mm

60 mm

63 mm

40 mm

BMHS Vx BI-METAL M3 EDGE 2 PIECE; 4/6 VARIABLE PITCH 48MM HANG SELL

54 – 60 mm

48 mm

70 mm

GROUP MATERIAL TYPE INTERNAL DEPTH PACKAGING

DIAMETER MM

DIAMETER INCH EQUIV.

PACK QTY

$ EACH

PART NUMBER

OLD PART NUMBER

83.00 86.00 89.00 92.00 95.00 98.00 100.00 * 102.00 * 105.00 * 108.00 * 111.00 * 114.00 * 121.00 * 127.00 * 140.00 * 146.00 * 152.00 * 160.00 * 168.00 * 177.00 * 210.00 *

3-1/4 3-3/8 3-1/2 3-5/8 3-3/4 3-7/8 – 4 4-1/8 4-1/4 4-3/8 4-1/2 4-3/4 5 5-1/2 5-3/4 6 6-5/16 6-5/16 7 8-1/4

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

42.37 44.65 44.83 49.46 51.69 54.57 56.70 56.70 60.51 64.88 64.88 69.26 79.29 82.76 90.84 100.16 108.51 113.46 121.57 129.68 137.79

7010-83 7010-86 7010-89 7010-92 7010-95 7010-98 7010-100 7010-102 7010-105 7010-108 7010-111 7010-114 7010-121 7010-127 7010-140 7010-146 7010-152 7010-160 7010-168 7010-177 7010-210

7010-552 7010-554 7010-556 7010-558 7010-560 7010-562 7010-M564 7010-564 7010-566 7010-568 7010-570 7010-572 7010-576 7010-580 7010-588 7010-592 7010-596 – – – –

Mandrels, Pilot Drills and Accessories

Ø Ø

page

166

* Large diameter hole saws should be used with high feed pressure and lower speeds.

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 151

WWW.BORDO.COM.AU

PAGE 151 21/04/12 6:34 PM

HOLESAWS BI-METAL KITS

GROUP MATERIAL TYPE INTERNAL DEPTH PACKAGING

BMKT Vx BI-METAL M3 EDGE 2 PIECE; 4/6 VARIABLE PITCH 48MM BLOW MOULDED KIT BOX

NEW KITS BI-METAL HOLESAWS Bordo hole saws are premium quality, general purpose saws suitable for a wide variety of materials and applications. The high-speed steel cutting edge provides shock resistant teeth and resists tooth strippage. 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration. FEATURES s 4/6 variable tooth configuration.

$ KIT 321.38 –

KIT TYPE ELECTRICIAN’S MASTER KIT – 8 SAWS CHIPPY’S MASTER KIT – 11 SAWS KIT CONTENTS

s 48mm (1-7/8”) depth of cut.

PART NUMBER 7010-S1 –

DESCRIPTION SPADE BIT 16MM SPADE BIT 20MM SPADE BIT 25MM BI-METAL HOLE SAW 16MM BI-METAL HOLE SAW 20MM BI-METAL HOLE SAW 25MM BI-METAL HOLE SAW 32MM BI-METAL HOLE SAW 40MM BI-METAL HOLE SAW 50MM BI-METAL HOLE SAW 54MM BI-METAL HOLE SAW 64MM 3/8 HEX MANDREL 7/16" HEX POSI-LOCK QC MANDREL 1/4" PILOT DRILL 3-1/2L –

PART NUMBER 2670-16 2670-20 2670-25 7010-16 7010-20 7010-25 7010-32 7010-40 7010-50 7010-54 7010-64 7050-5519 7050-5548 7060-8534 –

$ KIT – 470.29

PART NUMBER – 7010-S2

PART NUMBER BI-METAL HOLE SAW 16MM 7010-16 BI-METAL HOLE SAW 20MM 7010-20 BI-METAL HOLE SAW 22MM 7010-22 BI-METAL HOLE SAW 25MM 7010-25 BI-METAL HOLE SAW 32MM 7010-32 BI-METAL HOLE SAW 40MM 7010-40 BI-METAL HOLE SAW 50MM 7010-50 BI-METAL HOLE SAW 54MM 7010-54 BI-METAL HOLE SAW 64MM 7010-64 BI-METAL HOLE SAW 92MM 7010-92 BI-METAL HOLE SAW 114MM 7010-114 3/8-7/16 HEX QC EXT. 300MM (12") 5750-38716X300 3/8 HEX MANDREL 7050-5519 7/16" HEX POSI-LOCK QC MANDREL 7050-5548 1/4" PILOT DRILL 3-1/2L 7060-8534 DESCRIPTION

s #AN BE USED IN stainless steel with use of a cutting lubricant, reduced spindle speed and sufficient feed pressure to produce chips. Repetition hole cutting in stainless steel is best suited to Bordo XP and XP2 hole saws.

PAGE 152

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 152

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:34 PM

HOLESAWS BI-METAL KITS

GROUP MATERIAL TYPE INTERNAL DEPTH PACKAGING

BMKT Vx BI-METAL M3 EDGE 2 PIECE; 4/6 VARIABLE PITCH 48MM BLOW MOULDED KIT BOX

NEW KITS

KIT TYPE PLUMBER’S PIPE KIT – 12 SAWS SPARKY’S KIT – 6 SAWS KIT CONTENTS

$ KIT 492.96 –

PART NUMBER 7010-S3 –

PART NUMBER BI-METAL HOLE SAW 16MM 7010-16 BI-METAL HOLE SAW 19MM 7010-19 BI-METAL HOLE SAW 22MM 7010-22 BI-METAL HOLE SAW 25MM 7010-25 BI-METAL HOLE SAW 27MM 7010-27 BI-METAL HOLE SAW 30MM 7010-30 BI-METAL HOLE SAW 35MM 7010-35 BI-METAL HOLE SAW 44MM 7010-44 BI-METAL HOLE SAW 57MM 7010-57 BI-METAL HOLE SAW 73MM 7010-73 BI-METAL HOLE SAW 92MM 7010-92 BI-METAL HOLE SAW 114MM 7010-114 3/8~7/16 HEX QC EXT. 300MM (12") 5750-38716X300 3/8 HEX MANDREL 7050-5519 7/16" HEX POSI-LOCK QC MANDREL 7050-5548 1/4" PILOT DRILL 3-1/2L 7060-8534

$ KIT – 219.47

DESCRIPTION

DESCRIPTION BI-METAL HOLE SAW 16MM BI-METAL HOLE SAW 20MM BI-METAL HOLE SAW 25MM BI-METAL HOLE SAW 32MM BI-METAL HOLE SAW 40MM BI-METAL HOLE SAW 50MM 3/8 HEX MANDREL 7/16" HEX POSI-LOCK QC MANDREL 1/4" PILOT DRILL 3-1/2L – – – – – – –

PART NUMBER – 7010-S4 PART NUMBER 7010-16 7010-20 7010-25 7010-32 7010-40 7010-50 7050-5519 7050-5548 7060-8534 – – – – – – –

PLUMBER’S PIPE SET 7010-S3 16mm 19mm 22mm 25mm 27mm 30mm 35mm 44mm 57mm 73mm 92mm 114mm

1/2" Copper 1/2" Lagged Copper and 16mm PEX 3/4" (20mm) Copper and 20mm PEX 3/4" (20mm) Lagged Copper 1" (25mm) Copper and 25mm PEX 25mm Lagged Copper 1-1/4" (32mm) Copper and 32mm PEX 40mm PVC 50mm PVC 65mm PVC 90mm PVC Stormwater 100mm PVC

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 153

WWW.BORDO.COM.AU

PAGE 153 21/04/12 6:35 PM

HOLESAWS BI-METAL KITS

GROUP MATERIAL TYPE INTERNAL DEPTH PACKAGING

BMKT Vx BI-METAL M3 EDGE 2 PIECE; 4/6 VARIABLE PITCH 48MM BLOW MOULDED KIT BOX

LOCKSMITH’S KIT – 4 SAWS INDUSTRIAL KIT – 16 SAWS KIT CONTENTS

s 48mm (1-7/8”) depth of cut.

PART NUMBER 7010-S5 –

DESCRIPTION 25MM CHISEL SPADE BITS-10MM SPADE BITS-22MM SPADE BITS-25MM SPADE BITS-32MM SPADE BITS-35MM BI-METAL HOLE SAW 22MM BI-METAL HOLE SAW 25MM BI-METAL HOLE SAW 32MM BI-METAL HOLE SAW 54MM 3/8 HEX MANDREL 7/16" HEX POSI-LOCK QC MANDREL 1/4" PILOT DRILL 3-1/2L – – – – – – –

s MM 3/16”) thick heavy-duty backing plate eliminates need for drive plate. APPLICATIONS s Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas. s Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications. s Use in steel, aluminium, brass, cast iron, plastic, wood and a wide variety of other materials. s #AN BE USED IN stainless steel with use of a cutting lubricant, reduced spindle speed and sufficient feed pressure to produce chips. Repetition hole cutting in stainless steel is best suited to Bordo XP and XP2 hole saws.

PAGE 154

$ KIT 240.19 –

KIT TYPE

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 154

PART NUMBER – 2670-10 2670-22 2670-25 2670-32 2670-35 7010-22 7010-25 7010-32 7010-54 7050-5519 7050-5548 7060-8534 – – – – – – –

$ KIT – 665.38

PART NUMBER – 7010-S6

PART NUMBER BI-METAL HOLE SAW 16MM 7010-16 BI-METAL HOLE SAW 20MM 7010-20 BI-METAL HOLE SAW 22MM 7010-22 BI-METAL HOLE SAW 25MM 7010-25 BI-METAL HOLE SAW 32MM 7010-32 BI-METAL HOLE SAW 38MM 7010-38 BI-METAL HOLE SAW 40MM 7010-40 BI-METAL HOLE SAW 51MM 7010-51 BI-METAL HOLE SAW 54MM 7010-54 BI-METAL HOLE SAW 60MM 7010-60 BI-METAL HOLE SAW 64MM 7010-64 BI-METAL HOLE SAW 70MM 7010-70 BI-METAL HOLE SAW 89MM 7010-89 BI-METAL HOLE SAW 92MM 7010-92 BI-METAL HOLE SAW 100MM 7010-100 BI-METAL HOLE SAW 114MM 7010-114 7/16" HEX POSI-LOCK QC MANDREL 7050-5548 3/8 HEX MANDREL 7050-5519 3/8-7/16 HEX QC EXT. 300MM (12") 5750-38716X300 1/4" PILOT DRILL 3-1/2L 7060-8534 DESCRIPTION

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:35 PM

HOLESAWS BI-METAL MERCHANDISERS

GROUP MATERIAL TYPE INTERNAL DEPTH PACKAGING

BMKT Vx BI-METAL M3 EDGE 2 PIECE; 4/6 VARIABLE PITCH 48MM MERCHANDISER

NEW

MERCHANDISER TYPE D1 MERCHANDISER – 27 SAWS D3 MERCHANDISER – 57 SAWS KIT CONTENTS

$ MERCHANDISER 1,116.96 –

PART NUMBER 7010-D1 –

PART NUMBER BI-METAL HOLE SAW - 16MM 7010-16 BI-METAL HOLE SAW - 19MM 7010-19 BI-METAL HOLE SAW - 20MM 7010-20 BI-METAL HOLE SAW - 22MM 7010-22 BI-METAL HOLE SAW - 25MM 7010-25 BI-METAL HOLE SAW - 29MM 7010-29 BI-METAL HOLE SAW - 30MM 7010-30 BI-METAL HOLE SAW - 32MM 7010-32 BI-METAL HOLE SAW - 35MM 7010-35 BI-METAL HOLE SAW - 38MM 7010-38 BI-METAL HOLE SAW - 40MM 7010-40 BI-METAL HOLE SAW - 41MM 7010-41 BI-METAL HOLE SAW - 44MM 7010-44 BI-METAL HOLE SAW - 48MM 7010-48 BI-METAL HOLE SAW - 50MM 7010-50 BI-METAL HOLE SAW - 51MM 7010-51 BI-METAL HOLE SAW - 54MM 7010-54 BI-METAL HOLE SAW - 57MM 7010-57 BI-METAL HOLE SAW - 60MM 7010-60 BI-METAL HOLE SAW - 64MM 7010-64 BI-METAL HOLE SAW - 70MM 7010-70 BI-METAL HOLE SAW - 76MM 7010-76 BI-METAL HOLE SAW - 83MM 7010-83 BI-METAL HOLE SAW - 89MM 7010-89 BI-METAL HOLE SAW - 92MM 7010-92 BI-METAL HOLE SAW - 102MM 7010-102 BI-METAL HOLE SAW - 114MM 7010-114 1/4 ROUND MANDREL 7050-5514 3/8 HEX MANDREL 7050-5519 7/16 HEX MANDREL 7050-5520 7/16 HEX QUICK CHANGE MANDREL 7050-5545 3/8 HEX SNAP-LOCK QC MANDREL 7050-5547 1/4" PILOT DRILL 3-1/2L 7060-8534 1/4" PILOT DRILL 4-1/2L 7060-8535 3/8-7/16 HEX QC EXT.- 300MM (12") 5750-38716X300 DESCRIPTION

$ MERCHANDISER – 2,679.24

PART NUMBER ALL BI-METAL HOLE SAWS 14-152MM 7010-XXX 3/8 HEX MANDREL 7050-5519 1/4 ROUND MANDREL 7050-5514 7/16 HEX MANDREL 7050-5520 7/16 HEX QUICK CHANGE MANDREL 7050-5545 3/8 HEX QUICK CHANGE MANDREL 7050-5546 3/8" HEX SNAP-LOCK QC MANDREL 7050-5547 7/16" HEX POSI-LOCK QC MANDREL 7050-5548 1/4" PILOT DRILL 3-1/2L 7060-8534 1/4" PILOT DRILL 4-1/2L 7060-8535 CARBIDE TIPPED DRILL 7060-8537CT 3/8-7/16 HEX QC EXT. 300MM (12") 5750-38716X300 – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 155

PART NUMBER – 7010-D3

DESCRIPTION

WWW.BORDO.COM.AU

PAGE 155 21/04/12 6:35 PM

HOLESAWS POWER-HEX BI-METAL HANG SELL

54 – 60 mm

48 mm

65 mm

70 mm

PHHS Vx BI-METAL M3 EDGE 1 PIECE; 4/6 VARIABLE PITCH 48MM HANG SELL 41 – 48 mm

GROUP MATERIAL TYPE INTERNAL DEPTH PACKAGING

29 mm

BI-METAL HOLESAWS

FEATURES

APPLICATIONS s Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas. s Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications. s Use in steel, aluminium, brass, cast iron, plastic, wood and a wide variety of other materials. s #AN BE USED IN stainless steel with use of a cutting lubricant, reduced spindle speed and sufficient feed pressure to produce chips. Repetition hole cutting in stainless steel is best suited to Bordo XP and XP2 hole saws.

PAGE 156

DIAMETER INCH EQUIV.

PACK QTY

$ EACH

PART NUMBER

OLD PART NUMBER

16.00 19.00 20.00 22.00 25.00 29.00 30.00 32.00 35.00 38.00 40.00 41.00 44.00 48.00 50.00 51.00 54.00 57.00 60.00 64.00 67.00 70.00 73.00 75.00 76.00 79.00 83.00 86.00 89.00 92.00 95.00 98.00 100.00 102.00 105.00 108.00 111.00 114.00 121.00 127.00

5/8 3/4 – 7/8 1 1-1/8 1-3/16 1-1/4 1-3/8 1-1/2 1-9/16 1-5/8 1-3/4 1-7/8 – 2 2-1/8 2-1/4 2-3/8 2-1/2 2-5/8 2-3/4 2-7/8 – 3 3-1/8 3-1/4 3-3/8 3-1/2 3-5/8 3-3/4 3-7/8 – 4 4-1/8 4-1/4 4-3/8 4-1/2 4-3/4 5

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

44.92 44.92 44.92 44.92 47.19 47.46 47.95 48.51 50.18 50.42 51.37 51.37 53.82 54.68 54.68 54.68 58.44 58.44 58.98 61.02 64.10 64.60 65.32 66.07 66.31 67.17 67.17 69.35 69.54 73.97 76.12 78.90 80.94 80.94 84.60 88.82 88.82 93.02 102.66 106.01

7030-16 7030-19 7030-20 7030-22 7030-25 7030-29 7030-30 7030-32 7030-35 7030-38 7030-40 7030-41 7030-44 7030-48 7030-50 7030-51 7030-54 7030-57 7030-60 7030-64 7030-67 7030-70 7030-73 7030-75 7030-76 7030-79 7030-83 7030-86 7030-89 7030-92 7030-95 7030-98 7030-100 7030-102 7030-105 7030-108 7030-111 7030-114 7030-121 7030-127

7030-510 7030-512 7030-M513 7030-514 7030-516 7030-518 7030-519 7030-520 7030-522 7030-524 7030-525 7030-526 7030-528 7030-530 7030-M532 7030-532 7030-534 7030-536 7030-538 7030-540 7030-542 7030-544 7030-546 7030-M548 Ø 7030-548 7030-550 7030-552 7030-554 7030-556 7030-558 7030-560 7030-562 7030-M564 7030-564 7030-566 7030-568 7030-570 7030-572 7030-576 7030-580

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 156

83 mm

s MM 3/16”) thick heavy-duty backing plate eliminates need for drive plate.

DIAMETER MM

63 mm

s 48mm (1-7/8”) depth of cut.

60 mm

s 4/6 variable tooth configuration.

40 mm

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:35 PM

HOLESAWS POWER-HEX BI-METAL KIT

BMHS Vx BI-METAL M3 EDGE 1 PIECE; 4/6 VARIABLE PITCH 48MM BLOW MOLDED KIT BOX

54 – 60 mm

48 mm

70 mm

GROUP MATERIAL TYPE INTERNAL DEPTH PACKAGING

BI-METAL HOLESAWS Bordo hole saws are premium quality, general purpose saws suitable for a wide variety of materials and applications. The high-speed steel cutting edge provides shock resistant teeth and resists tooth strippage. 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration. FEATURES s 4/6 variable tooth configuration.

$ KIT 440.17

KIT TYPE TRADESMAN’S SET – 9 SAWS

83 mm

60 mm

63 mm

40 mm

KIT CONTENTS

DESCRIPTION BI-METAL HOLE SAW 16MM BI-METAL HOLE SAW 20MM BI-METAL HOLE SAW 22MM BI-METAL HOLE SAW 25MM BI-METAL HOLE SAW 32MM BI-METAL HOLE SAW 40MM BI-METAL HOLE SAW 51MM BI-METAL HOLE SAW 54MM BI-METAL HOLE SAW 60MM POWER-HEX QC ADAPTOR 1/4" PILOT DRILL 3-1/2L

PART NUMBER 7030-S1 PART NUMBER 7030-16 7030-20 7030-22 7030-25 7030-32 7030-40 7030-51 7030-54 7030-60 7065-5555 7060-8536

s Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications. s Use in steel, aluminium, brass, cast iron, plastic, wood and a wide variety of other materials. s #AN BE USED IN stainless steel with use of a cutting lubricant, reduced spindle speed and sufficient feed pressure to produce chips. Repetition hole cutting in stainless steel is best suited to Bordo XP and XP2 hole saws.

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 157

WWW.BORDO.COM.AU

PAGE 157 21/04/12 6:35 PM

HOLESAWS RIPPER TCT HANG SELL

NEW SIZES

DIAMETER INCH EQUIV.

PACK QTY

$ EACH

PART NUMBER

16.00 20.00 25.00 32.00 35.00 38.00 44.00 51.00 54.00 57.00 60.00 63.00 80.00 92.00 114.00 153.00

5/8 – 1 1-1/4 1-3/8 1-1/2 1-3/4 2 2-1/8 2-1/4 2-3/8 – – 3-5/8 4-1/2 –

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

23.81 23.81 25.29 25.29 25.29 27.51 29.53 34.78 37.01 35.20 40.05 40.86 43.68 58.28 72.58 112.36

7075-16 7075-20 7075-25 7075-32 7075-35 7075-38 7075-44 7075-51 7075-54 7075-57 7075-60 7075-63 7075-80 7075-92 7075-114 7075-153

$ MERCHANDISER 655.33

PART NUMBER 7075-D1

MERCHANDSIER TYPE RIPPER – 16 SAWS

DESCRIPTION

MERCHANDISER CONTENTS

RIPPER HOLE SAW 16MM RIPPER HOLE SAW 20MM RIPPER HOLE SAW 25MM RIPPER HOLE SAW 32MM RIPPER HOLE SAW 35MM RIPPER HOLE SAW 38MM RIPPER HOLE SAW 44MM RIPPER HOLE SAW 51MM RIPPER HOLE SAW 54MM RIPPER HOLE SAW 57MM RIPPER HOLE SAW 60MM RIPPER HOLE SAW 63MM RIPPER HOLE SAW 80MM RIPPER HOLE SAW 92MM RIPPER HOLE SAW 114MM RIPPER HOLE SAW 153MM

PAGE 158

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 158

48 mm

70 mm

40 mm

APPLICATIONS s )DEAL FOR CUTTING timber and all types of composite board, particularly MDF. s 2IPPER HOLESAWS are also suitable for cutting wood laminates, plywood, insulation and fibre cement sheet.

DIAMETER MM

63 mm

65 mm

37mm

18mm

FEATURES s (EAVY DUTY ABRASION resistant tungsten carbide teeth will cut materials that quickly dull normal hole saws. s (EAVY DUTY construction for long life with large gullets for easy slug removal.

CTHS TUNGSTEN CARBIDE 2 PIECE 65MM HANG SELL 41 – 48 mm

10mm

GROUP MATERIAL TYPE INTERNAL DEPTH PACKAGING

29 mm

RIPPER HEAVY DUTY TUNGSTEN CARBIDE TIPPED HOLESAWS

PART NUMBER 7075-16 7075-20 7075-25 7075-32 7075-35 7075-38 7075-44 7075-51 7075-54 7075-57 7075-60 7075-63 7075-80 7075-92 7075-114 7075-153

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:35 PM

HOLESAWS RIPPER TCT KIT

GROUP MATERIAL TYPE INTERNAL DEPTH PACKAGING

CTHS TUNGSTEN CARBIDE 2 PIECE 65MM BLOW MOLDED KIT BOX

CTHS TUNGSTEN CARBIDE 2 PIECE 65MM INJECTION MOLDED KIT BOX

RIPPER HEAVY DUTY TUNGSTEN CARBIDE TIPPED HOLESAWS FEATURES s (EAVY DUTY ABRASION resistant tungsten carbide teeth will cut materials that quickly dull normal hole saws. s (EAVY DUTY construction for long life with large gullets for easy slug removal.

NEW SET

KIT TYPE RIPPER HOLE SAW KIT - 6 HOLE SAWS RIPPER HOLE SAW KIT - 9 HOLE SAWS KIT CONTENTS

$ KIT 163.36 –

PART NUMBER 7075-S2 –

DESCRIPTION RIPPER HOLE SAW 25MM RIPPER HOLE SAW 32MM RIPPER HOLE SAW 35MM RIPPER HOLE SAW 38MM RIPPER HOLE SAW 44MM RIPPER HOLE SAW 51MM POSI-LOCK QC MANDREL PILOT DRILL - CARBIDE TIPPED – – – – –

PART NUMBER 7075-25 7075-32 7075-35 7075-38 7075-44 7075-51 7050-5548 7060-8537CT – – – – –

$ KIT – 300.35 DESCRIPTION RIPPER HOLE SAW 25MM RIPPER HOLE SAW 32MM RIPPER HOLE SAW 35MM RIPPER HOLE SAW 38MM RIPPER HOLE SAW 44MM RIPPER HOLE SAW 51MM RIPPER HOLE SAW 54MM RIPPER HOLE SAW 57MM RIPPER HOLE SAW 63MM 7/16" HEX SHANK POSI-LOCK MANDREL 7/16" HEX SHANK MANDREL PILOT DRILL PILOT DRILL - CARBIDE TIPPED

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 159

PART NUMBER – 7075-S1 PART NUMBER 7075-25 7075-32 7075-35 7075-38 7075-44 7075-51 7075-54 7075-57 7075-63 7050-5548 7050-5520 7060-8535 7060-8538CT

WWW.BORDO.COM.AU

APPLICATIONS s )DEAL FOR CUTTING timber and all types of composite board, particularly MDF. s 2IPPER HOLESAWS are also suitable for cutting wood laminates, plywood, insulation and fibre cement sheet.

PAGE 159 21/04/12 6:35 PM

HOLESAWS BRILLIANT DIAMOND HANG SELL

45 mm

vacuum brazed diamond

DIHS VACUUM BRAZED DIAMOND 2 PIECE; M14 THREAD 45MM HANG SELL 50mm for Ø ≥ 25mm

brilliant

GROUP MATERIAL TYPE INTERNAL DEPTH PACKAGING

vacuum brazed diamond saws

DIAMOND HOLESAWS Bordo’s range of Brilliant diamond hole saws are manufactured using vacuum brazing to “adhere” the diamond material to the saw. FEATURES s 6ACUUM BRAZING provides the strongest bond between the diamond particles and the holesaw s 3UPERIOR PERFORMANCE and greater saw life than traditional electroplated diamond saws.

Ø DIAMETER MM

DIAMETER INCH EQUIV.

PACK QTY

$ EACH

PART NUMBER

10.00 15.00 20.00 25.00 30.00 35.00 40.00 45.00 50.00 65.00 75.00 115.00

– – – 1 1-3/16 1-3/8 1-9/16 1-3/4 – 2-9/16 – –

1 1 1 1 1 1 1 1 1 1 1 1

178.21 178.21 178.21 178.21 193.10 193.10 193.10 215.28 227.25 269.11 358.81 478.42

7084-10 7084-15 7084-20 7084-25 7084-30 7084-35 7084-40 7084-45 7084-50 7084-65 7084-75 7084-115

$ EACH 19.44

PART NUMBER 7084-1420

s 3LOTTED CUTTING EDGE allows water to enter the cut, extending tool life APPLICATIONS s )DEALLY SUITED TO cutting ceramics, tiles, porcelain and stone

DESCRIPTION MANDREL – TO SUIT BRILLIANT SAWS

Adjustable Holesaw Drilling Template 4-83mm page

206

Brilliant diamond hole saws achieve optimal cutting efficiency when used at high speeds in an angle grinder. The saws feature an M14 thread which is suitable for use with most popular angle grinders. Brilliant saws may be used in pistol and pedestal drills using the three jaw chuck adaptor mandrel – Part # 7084-1420

Apply spinning hole saw to workpiece at an angle so that only the edge is engaged. As a small groove begins to form gradually move the grinder/drill until the saw is flat and fully engaged with the workpiece. Aternatively position the saw using Bordo adjustable drilling template and commence drilling with the saw flat against the workpiece IMPORTANT Drilling using diamond abrasive is a wet process. Ensure adequate water to keep the saw edge cool. Water and electricity are a dangerous combination - maintain a safe working environment.

PAGE 160

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 160

FINAL START

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071

FINAL

21/04/12 6:35 PM

TC GRIT EDGE BOX & KIT

54 â&#x20AC;&#x201C; 60 mm

PACK QTY

$ EACH

Ã&#x2DC; PART NUMBER

OLD PART NUMBER

16.00 19.00 20.00 22.00 25.00 29.00 32.00 35.00 38.00 44.00 48.00 51.00 54.00 57.00 60.00 64.00 70.00 76.00 83.00 86.00 95.00 102.00 114.00

â&#x20AC;&#x201C; 3/4 â&#x20AC;&#x201C; 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2 1-3/4 1-7/8 2 2-1/8 2-1/4 2-3/8 2-1/2 2-3/4 3 3-1/4 3-3/8 3-3/4 4 4-1/2

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

36.21 36.21 36.85 36.85 36.85 38.34 40.52 41.96 44.93 49.25 49.25 49.25 49.25 50.04 51.43 52.16 62.27 64.56 66.63 67.19 68.74 69.41 81.78

7090-16 7090-19 7090-20 7090-22 7090-25 7090-29 7090-32 7090-35 7090-38 7090-44 7090-48 7090-51 7090-54 7090-57 7090-60 7090-64 7090-70 7090-76 7090-83 7090-86 7090-95 7090-102 7090-114

7090-GO10M 7090-GO12 7090-GO13M 7090-GO14 7090-GO16 7090-GO18 7090-GO20 7090-GO22 7090-GO24 7090-GO28 7090-GO30 7090-GO32 7090-GO34 7090-GO36 7090-GO38 7090-GO40 7090-GO44 7090-GO48 7090-GO52 7090-GO54 7090-GO60 7090-GO64 7090-GO72 60 mm

Ã&#x2DC; DIAMETER INCH EQUIV.

63 mm

DIAMETER MM

FEATURES s MM v depth of cut. s .O TEETH TO DULL or chip. s (IGH HEAT AND abrasion resistance. s 2ESISTS SNAGGING s 3MOOTH CUTTING s (IGH WEAR resistance. s MM v thick heavy duty backing plate eliminates the need for drive plate. s 5SES STANDARD holesaw mandrel, usually in conjunction with carbide tipped pilot drill.

83 mm

48 mm

70 mm

Ã&#x2DC;

REMG TUNGSTEN CARBIDE GRIT 2 PIECE 29MM BOX

65 mm

29 mm

41 â&#x20AC;&#x201C; 48 mm

GROUP MATERIAL TYPE INTERNAL DEPTH PACKAGING

40 mm

Ã&#x2DC;

HOLESAWS REMGRIT

APPLICATIONS s 2ECOMMENDED FOR cutting laminates, fibreglass, ceramic tile, marble and slate, cast iron, fibre cement sheet and composites. s .OT SUITABLE FOR monocottura or vitrified products â&#x20AC;&#x201C; these products are best cut by Bordoâ&#x20AC;&#x2122;s Brilliant diamond hole saws. See page 160.

Ã&#x2DC; Ã&#x2DC; $ KIT 387.23

KIT TYPE TILERâ&#x20AC;&#x2122;S SET â&#x20AC;&#x201C; 6 SAWS KIT CONTENTS

DESCRIPTION REMGRIT HOLE SAW 20MM REMGRIT HOLE SAW 29MM REMGRIT HOLE SAW 35MM REMGRIT HOLE SAW 38MM REMGRIT HOLE SAW 44MM REMGRIT HOLE SAW 51MM 11/32" HEX MANDREL 11/32" HEX QC MANDREL MANDREL ADPATOR

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 161

PART NUMBER 7090-S1 PART NUMBER 7090-20 7090-29 7090-35 7090-38 7090-44 7090-51 7050-5519CT 7050-5546CT 7050-5511

WWW.BORDO.COM.AU

PAGE 161 21/04/12 6:35 PM

HOLESAWS REMGRIT TC GRIT MECHANDISERS

REMGRIT HOLE SAWS The tungsten carbide Grit-Edge on each RemGrit product equips it to handle the toughest materials, from ceramic tile to marble and glass. Thousands of carbide particles are permanently bonded to the cutting edge precisely for specific cutting and drilling needs. FEATURES s MM v depth of cut. s .O TEETH TO DULL or chip. s (IGH HEAT AND abrasion resistance. s 2ESISTS SNAGGING s 3MOOTH CUTTING s (IGH WEAR resistance. s MM v thick heavy duty backing plate eliminates the need for drive plate. s 5SES STANDARD holesaw mandrel, usually in conjunction with carbide tipped pilot drill.

GROUP MATERIAL TYPE CUTTING DEPTH PACKAGING

$ MERCHANDISER 900.57 â&#x20AC;&#x201C;

MERCHANDISER TYPE REMGRIT D3 MERCH â&#x20AC;&#x201C; 17 SAWS REMGRIT D1 MERCH â&#x20AC;&#x201C; 23 SAWS

DESCRIPTION

MERCHANDISER CONTENTS

REMGRIT HOLE SAW 22MM REMGRIT HOLE SAW 25MM REMGRIT HOLE SAW 29MM REMGRIT HOLE SAW 32MM REMGRIT HOLE SAW 35MM REMGRIT HOLE SAW 38MM REMGRIT HOLE SAW 44MM REMGRIT HOLE SAW 51MM REMGRIT HOLE SAW 54MM REMGRIT HOLE SAW 57MM REMGRIT HOLE SAW 64MM REMGRIT HOLE SAW 70MM REMGRIT HOLE SAW 76MM REMGRIT HOLE SAW 83MM REMGRIT HOLE SAW 86MM REMGRIT HOLE SAW 95MM REMGRIT HOLE SAW 114MM â&#x20AC;&#x201C; â&#x20AC;&#x201C; â&#x20AC;&#x201C; â&#x20AC;&#x201C; â&#x20AC;&#x201C; â&#x20AC;&#x201C; â&#x20AC;&#x201C; â&#x20AC;&#x201C; â&#x20AC;&#x201C; â&#x20AC;&#x201C;

PAGE 162

REMG TUNGSTEN CARBIDE GRIT 2 PIECE 29MM MERCHANDISER

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 162

REMG TUNGSTEN CARBIDE GRIT 2 PIECE 29MM MERCHANDISER

PART NUMBER 7090-D3 â&#x20AC;&#x201C; PART NUMBER 7090-22 7090-25 7090-29 7090-32 7090-35 7090-38 7090-44 7090-51 7090-54 7090-57 7090-64 7090-70 7090-76 7090-83 7090-86 7090-95 7090-114 â&#x20AC;&#x201C; â&#x20AC;&#x201C; â&#x20AC;&#x201C; â&#x20AC;&#x201C; â&#x20AC;&#x201C; â&#x20AC;&#x201C; â&#x20AC;&#x201C; â&#x20AC;&#x201C; â&#x20AC;&#x201C; â&#x20AC;&#x201C;

$ MERCHANDISER â&#x20AC;&#x201C; 1,327.99 DESCRIPTION REMGRIT HOLE SAW 16MM REMGRIT HOLE SAW 19MM REMGRIT HOLE SAW 20MM REMGRIT HOLE SAW 22MM REMGRIT HOLE SAW 25MM REMGRIT HOLE SAW 29MM REMGRIT HOLE SAW 32MM REMGRIT HOLE SAW 35MM REMGRIT HOLE SAW 38MM REMGRIT HOLE SAW 44MM REMGRIT HOLE SAW 48MM REMGRIT HOLE SAW 51MM REMGRIT HOLE SAW 54MM REMGRIT HOLE SAW 57MM REMGRIT HOLE SAW 60MM REMGRIT HOLE SAW 64MM REMGRIT HOLE SAW 70MM REMGRIT HOLE SAW 76MM REMGRIT HOLE SAW 83MM REMGRIT HOLE SAW 86MM REMGRIT HOLE SAW 95MM REMGRIT HOLE SAW 102MM REMGRIT HOLE SAW 114MM 11/32" HEX MANDREL 11/32" HEX QC MANDREL PILOT BIT - CARBIDE TIPPED MANDREL ADPATOR

PART NUMBER â&#x20AC;&#x201C; 7090-D1 PART NUMBER 7090-16 7090-19 7090-20 7090-22 7090-25 7090-29 7090-32 7090-35 7090-38 7090-44 7090-48 7090-51 7090-54 7090-57 7090-60 7090-64 7090-70 7090-76 7090-83 7090-86 7090-95 7090-102 7090-114 7050-5519CT 7050-5546CT 7060-8537CT 7060-5511

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:35 PM

HOLESAWS DOWNLIGHT TC GRIT HANG, SET & MERCH

REMG TUNGSTEN CARBIDE GRIT 2 PIECE 26MM HANG SELL, KIT, MERCHANDISER

32 mm

50mm for Ã&#x2DC; â&#x2030;¥ 25mm

GROUP MATERIAL TYPE INTERNAL DEPTH PACKAGING

DOWNLIGHT CUTTERS The tungsten carbide Grit-Edge on each Bordo Downlight Cutter provides an extremely hard wearing, smooth cutting edge - even in the most abrasive materials. FEATURES s MM v depth of cut.

Ã&#x2DC;

s .O TEETH TO dull or chip.

DIAMETER MM 72.00 75.00 89.00 92.00 95.00

DIAMETER INCH â&#x20AC;&#x201C; â&#x20AC;&#x201C; 3-1/2 3-5/8 3-3/4

PACK QTY 1 1 1 1 1

$ EACH 63.57 63.57 71.36 71.36 71.36

PART NUMBER 7095-72 7095-75 7095-89 7095-92 7095-95

s (IGH HEAT and abrasion resistance. s 2ESISTS snagging. s 3MOOTH cutting. s (IGH WEAR resistance. APPLICATIONS s 2ECOMMENDED FOR cutting plasterboard, fibre cement sheet and composites.

$ KIT 447.78

KIT TYPE DOWNLIGHT CUTTER KIT â&#x20AC;&#x201C; 5 SAWS

DESCRIPTION

KIT CONTENTS

DOWNLIGHT CUTTER - 72MM DOWNLIGHT CUTTER - 75MM DOWNLIGHT CUTTER - 89MM DOWNLIGHT CUTTER - 92MM DOWNLIGHT CUTTER - 95MM 11/32 HEX MANDREL 300MM QUICK CHANGE EXTENSION

$ MERCHANDISER 852.09

MERCHANDISER TYPE DOWNLIGHT CUTTER â&#x20AC;&#x201C; 10 SAWS MERCHANDISER CONTENTS

QTY

DESCRIPTION

2 2 2 2 2 5

DOWNLIGHT CUTTER - 72MM DOWNLIGHT CUTTER - 75MM DOWNLIGHT CUTTER - 89MM DOWNLIGHT CUTTER - 92MM DOWNLIGHT CUTTER - 95MM 7/16 HEX MANDREL

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 163

PART NUMBER 7095-S1

NEW PRODUCT

PART NUMBER 7095-72 7095-75 7095-89 7095-92 7095-95 7050-5546 5750-38716X300

PART NUMBER 7095-D1 PART NUMBER 7095-72 7095-75 7095-89 7095-92 7095-95 7050-5521

WWW.BORDO.COM.AU

PAGE 163 21/04/12 6:35 PM

HOLESAWS ADJUSTABLE HOLE CUTTERS BOX

ADJUSTABLE HOLE CUTTERS Quickly and safely cut large diameter holes in a wide variety of materials. FEATURES s 3IMPLE TO ADJUST and built to last.

GROUP CUTTING BLADE CUTTING DEPTH COWL TYPE SHANK PACKAGING

ADHC TUNGSTEN CARBIDE 50MM MAX. IMPACT RESISTANT POLYCARBONATE ADJUSTABLE WITH BALANCE BAR FLATTED BLOW MOLDED KIT BOX

s 3UPPLIED WITH two replaceable tungsten carbide blades. s !DJUSTABLE CUTTING thickness from 5mm to 50mm. s )MPACT RESISTANT cowl collects dust and debris whilst protecting the operator from flying material. s "ALANCE BAR ENSURES minimal vibration when cutting large diameter holes. s 3UITABLE FOR CUTTING veneer, plywood, composite board, plasterboard, fibre cement sheet and acrylic sheet. s 3UITABLE FOR CUTTING sheet metal up to 1mm thick – including brass & aluminium using tungsten carbide spear tip blade included.

MAX. DIA MM

MIN. DIA MM

PACK QTY

$ EACH

PART NUMBER

220 290

30 30

1 1

208.58 250.29

7096-220A 7096-285A

$ EACH 17.39 19.13 12.41 16.14

PART NUMBER 7096-WDB 7096-SMB 7096-HSSD 7096-CTD

7096-WDB

7096-SMB

ACCESSORIES REPLACEMENT BLADE REPLACEMENT BLADE - SPEAR TIP HSS PILOT DRILL CARBIDE TIPPED PILOT DRILL

PAGE 164

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 164

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:35 PM

HOLESAWS DOOR LOCK INSTALLATION KIT MORTICE CHISEL

GROUP SAW MATERIAL TYPE CUTTING DEPTH PACKAGING

BMKT BI-METAL, M3 EDGE 2 PIECE 44MM : 1-3/4" CLAM SHELL

$ KIT 135.66

KIT TYPE DOOR LOCK INSTALLATION KIT KIT CONTENTS

DESCRIPTION DOOR LOCK MORTICE CHISEL

Designed for fast, accurate door lock installation with professional results every time. Dual sided, no need to flip or reposition. Simply position, tighten and drill. For use on wood and metal doors. Heavy duty drill guide is completely adjustable for fast lock installation. Adjusts to 1-3/8” and 1-3/4” door thickness and to 2-3/8” and 2-3/4” backset. Side window for accurate positioning on door.

PART NUMBER 7010-6574 SIZE INCH

QTY 1 1 1 1 1 1 1

DOOR LOCK INSTALLATION KIT

INSTALLATION GUIDE 2-1/8” BI-METAL HOLE SAW 1” BI-METAL HOLE SAW MANDREL PILOT DRILL MANDREL ADAPTOR INSTRUCTION SHEET

$ EACH 31.82

PART NUMBER 7010-6575

DOOR LOCK MORTICE CHISEL s 0ROTECTS DELICATE door edges. s /UTLINE BLADE FOR clean, accurate professional installation. s 'UIDE POST matches 1” door edge bore for simple placement. s 0RESET DEPTH FOR precise mounting. s -ORTICE BLADE FOR clean trimming of strike plate area. s #LEAR VISIBILITY FOR accurate placement. s "ODY MATCHES both common door widths for additional alignment.

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 165

WWW.BORDO.COM.AU

PAGE 165 21/04/12 6:35 PM

HOLESAWS MANDRELS HANG SELL

5548 NEW

5547 NEW

5546CT

5546

5545

5520

5519CT

MAND CLAM SHELL / HANG BOX

5519

Bordo’s Snap-Lock mandrel features a spring loaded collar to quickly engage and disengage the dual locking pins that prevent mandrel and saw binding.

GROUP PACKAGING

5514

SNAP-LOCK MANDREL

POSI-LOCK MANDREL Bordo’s Posi-Lock mandrel tightens to create a positive lock to minimise saw runout and wobble. Locking pins prevent mandrel and saw binding.

NEW

MANDRELS

HOLE SAW MM

CHUCK INCH

SHANK INCH

14 - 30 14 - 30 14 - 30 32 - 51 72 - 95 32 - 152 32 - 152 32 - 152 32 - 210

1/4" 3/8"-1/2" 3/8"-1/2" 1/2" 3/8"-1/2" 1/2" 3/8"-1/2" 3/8"-1/2" 1/2"

1/4" RND 11/32" HEX 11/32" HEX 7/16" HEX 7/16” HEX 7/16" HEX 11/32" HEX 11/32" HEX 11/32"

32 - 210

1/2"

7/16"

s BI-METAL HOLESAW s REMGRIT TUNGSTEN CARBIDE GRIT EDGE HOLESAW

SUITS

DESCRIPTION

s MOST ECONOMICAL s FITS 3/8" AND 1/2" DRILLS ss 5519 WITH CARBIDE BIT ss FITS 1/2" DRILLS s DOWNLIGHT CUTTER MANDREL ss SCREW IN PINS (QUICK CHANGE) ss SCREW IN PINS (QUICK CHANGE) sss 5546 WITH CARBIDE BIT ss SNAP-LOCK MANDREL ss POSI-LOCK MANDREL s RIPPER CARBIDE TIPPED HOLESAW s DOWNLIGHT CUTTER

GROUP PACKAGING

HOLE SAW MM

$ EACH

PART NUMBER

1 1 1 1 1 1 1 1 1

19.76 28.86 49.55 33.93 33.93 50.24 50.24 68.88 50.24

7050-5514 7050-5519 7050-5519CT 7050-5520 7050-5521 7050-5545 7050-5546 7050-5546CT 7050-5547

49.55

7050-5548

PHEX DISPLAY BOX

CHUCK INCH

SHANK INCH

SUITS DESCRIPTION

STUB MANDRELS – TO SUIT POWER-HEX ADAPTOR 16 - 30 3/8"-1/2" 11/32" HEX sss POWER-HEX COMPATIBLE 32 - 100 3/8"-1/2" 11/32" HEX ssss POWER-HEX COMPATIBLE

s BI-METAL HOLESAW s REMGRIT TUNGSTEN CARBIDE GRIT EDGE HOLESAW PAGE 166

PACK QTY

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 166

PACK QTY

$ EACH

PART NUMBER

10 10

16.81 16.81

7065-5512 7065-5558

s RIPPER CARBIDE TIPPED HOLESAW s DOWNLIGHT CUTTER TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:36 PM

HOLESAWS PILOT DRILLS & ACCESSORIES

GROUP PRODUCT MATERIAL DIAMETER PACKAGING

LENGTH MM INCH 89.00 3-1/2 89.00 3-1/2 114.00 4-1/2 89.00 3-1/2 114.00 4-1/2

ACES PILOT DRILL HSS 1/4" CLAM SHELL

FOR USE WITH MANDRELS 5515, 5516, 5519, 5546 MANDRELS 5512, 5558 STUB MANDRELS 5514, 5518, 5520, 5545, 5573 MANDRELS 5519CT, 5546CT MANDRELS 5514, 5518, 5520, 5545, 5573 MANDRELS

QTY PACK 1 1 1 1 1

$ EACH 9.28 9.28 9.28 – –

PART NUMBER 7060-8534 7060-8536 7060-8535 – –

ACES PILOT DRILL HSS – CARBIDE TIP 1/4" BULK

$ EACH – – – 21.75 21.75

GROUP

PART NUMBER – – – 7060-8537CT 7060-8538CT

ACES

DESCRIPTION

$ EACH

PART NUMBER

EXTENSION 300MM (12") – FOR USE WITH 5518, 5520 & 5545 EXTENSION ADAPTER – FOR USE WITH 5515 & 5516 TO SUIT 5500 ADAPTOR MANDREL ADAPTOR – FOR SMALL THREAD MANDRELS TO FIT HOLE SAWS >30MM SET SCREWS – FOR USE WITH 5514, 5519 & 5520 SET SCREWS – FOR USE WITH 5545 & 5546 SET SCREWS – FOR USE WITH 7065-5512 AND 7065-5558 STUB MANDRELS

38.92 26.00 7.88 5.46 5.46 5.46

7060-5500 7060-5502 7060-5511 7060-SS1 7060-SS2 7060-SS3

Dust Bowls & Power-Hex Quick Change Adaptors and Extensions Quick change industrial strength adaptors and extensions page

206 & 207 SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 167

WWW.BORDO.COM.AU

PAGE 167 21/04/12 6:36 PM

HOLESAWS SHEETMETAL THINWALL HANG & MERCH

THINWALL SHEETMETAL HOLESAWS Ideal for the electrical and plumbing tradesman. Hole saw has a thin 0.5mm sidewall blade thickness, which allows for faster cutting and longer battery life. Ideal for chargeable impact drivers.

GROUP MATERIAL TEETH SIDEWALL TYPE SHANK PACKAGING

BMSM M42 BI-METAL â&#x20AC;&#x201C; 8% COBALT 8 TPI CONSTANT PITCH 0.5MM 1 PIECE 1/4" BOX

FEATURES s #ONSTANT PITCH M42 material with special 8TPI tooth design for smoother cuts in sheet metal. s 3ELF EJECTING plug removal. s " pilot drill for easy center locating and quicker cutting penetration. s " quick change shank, ideal for use with battery operated impact drivers. s 3AFETY COLLAR STOP helps prevent cutting too deep. BENEFITS s 3MOOTH AND FAST cutting â&#x20AC;&#x201C; especially designed tooth geometry assures increased performance and better wear resistance.

DIAMETER MM

DIAMETER INCH EQUIV.

PACK QTY

$ EACH

PART NUMBER

OLD PART NUMBER

16.00 19.00 20.00 22.00 25.00 27.00 29.00 30.00 32.00 35.00 38.00

5/8 3/4 â&#x20AC;&#x201C; 7/8 1 1-1/16 1-1/8 1-3/16 1-1/4 1-3/8 1-1/2

1 1 1 1 1 1 1 1 1 1 1

18.37 18.42 18.48 18.54 18.58 18.65 18.92 19.37 19.99 20.54 21.15

7040-16 7040-19 7040-20 7040-22 7040-25 7040-27 7040-29 7040-30 7040-32 7040-35 7040-38

7040-6918 7040-6919 7040-6920 7040-6921 7040-6922 7040-6923 7040-6924 7040-6925 7040-6926 7040-6927 7040-6928

s ,IGHTWEIGHT BLADES maximize the use of chargeable impact drivers by using a reduced motor and operation load. s 3AFETY COLLAR STOP helps prevent damage to wires when drilling into electrical boxes.

$ MERCHANDISER 211.01

MERCHANDSIER TYPE SHEETMETAL HOLE SAWSâ&#x20AC;&#x201C; 11 SAWS MERCHANDISER CONTENTS

QTY 1 1 1 1 1 1 1 1 1 1 1

PAGE 168

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 168

DESCRIPTION THINWALL SAW 16MM THINWALL SAW 19MM THINWALL SAW 120MM THINWALL SAW 22MM THINWALL SAW 25MM THINWALL SAW 27MM THINWALL SAW 29MM THINWALL SAW 30MM THINWALL SAW 32MM THINWALL SAW 35MM THINWALL SAW 38MM

PART NUMBER 7040-D1 PART NUMBER 7040-16 7040-19 7040-20 7040-22 7040-25 7040-27 7040-29 7040-30 7040-32 7040-35 7040-38

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:36 PM

HOLESAWS XP & XP2 TCT HANG SELL

$ EACH

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

80.98 80.98 80.98 80.98 80.98 80.98 80.98 80.98 80.98 80.98 93.62 93.62 93.62 93.62 93.62 109.74 109.74 109.74 109.74 109.74 126.39 126.39 126.39 145.83 145.83 145.83 170.15 170.15 187.49 208.32 245.15 265.98 288.88 288.88 381.94 431.25

PART NUMBER 7080-16 7080-17 7080-18 7080-19 7080-20 7080-21 7080-22 7080-23 7080-24 7080-25 7080-26 7080-27 Ø 7080-28 7080-29 7080-30 7080-31 7080-32 7080-33 7080-34 7080-35 7080-36 7080-38 7080-40 7080-42 7080-43 7080-45 7080-48 7080-50 7080-55 7080-60 7080-65 7080-70 7080-75 7080-80 7080-90 7080-100

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 169

$ EACH

PART NUMBER

124.15 – 124.15 124.15 129.71 – 129.71 – 129.71 129.71 140.83 140.83 140.83 – 140.83 – 169.64 169.64 169.64 169.64 180.77 180.77 180.77 203.24 – 203.24 – 203.24 281.11 290.89 290.89 313.14 313.14 357.64 402.13 480.00

7081-16 – 7081-18 7081-19 7081-20 – 7081-22 – 7081-24 7081-25 7081-26 7081-27 Ø 7081-28 – 7081-30 – 7081-32 7081-33 7081-34 7081-35 7081-36 7081-38 7081-40 7081-42 – 7081-45 – 7081-50 7081-55 7081-60 7081-65 7081-70 7081-75 7081-80 7081-90 7081-100

29 mm

PACK QTY

WWW.BORDO.COM.AU

XP2 TUNGSTEN CARBIDE HOLE SAWS

70 mm

XP TCT hole saws are ideal for repetition cutting in steel plate, stainless steel plate and synthetic resin plates up to 4mm thick.

XP2 TCT hole saws feature 3 edged cutters which balance theØcutting effort for smoother boring, greater control and reduced drag. The deep body makes them ideal for use with curved surfaces such as metal pipes. FEATURES s Non-uniform separation of the tungsten carbide teeth and integrated mandrel virtually elimates vibration due to resonance. s %XTREMELY LONG service life. s .O NEED FOR MESSY cutting fluids. s (EAVY DUTY PLUG ejector spring. APPLICATIONS s 2EPETITION CUTTING of steel plate, stainless steel plate, sheet metal and other hard or abrasive materials. Cutting Depth (mm) XP Steel 4.5 S/Steel 3 AluminiumØ 3

XP2 23 3+ 3+

PAGE 169 21/04/12 6:36 PM

40 mm

5/8 11/16 10mm – 3/4 – 13/16 7/8 – 15/16 1 – 1-1/16 – Ø 1-1/8 1-3/16 – 1-1/4 1-5/16 – 1-3/8 – 1-1/2 1-9/16 – 1-11/16 – 1-7/8 – – 2-3/8 2-9/16 2-3/4 – – – –

37mm

52mm

10mm

16.00 17.00 18.00 19.00 20.00 21.00 22.00 23.00 24.00 25.00 26.00 27.00 28.00 29.00 30.00 31.00 32.00 33.00 34.00 35.00 36.00 38.00 40.00 42.00 43.00 45.00 48.00 50.00 55.00 60.00 65.00 70.00 75.00 80.00 90.00 100.00

DIAMETER INCH EQUIV.

18mm

XP TUNGSTEN CARBIDE HOLE SAWS

41 – 48 mm

65 mm

Ø DIAMETER MM

35mm

SMCC XP2 - DEEP CUT TUNGSTEN CARBIDE BUILT-IN 25.0MM HANG SELL

37mm

18mm

52mm

35mm

29 mm

10mm

SMCC XP TUNGSTEN CARBIDE BUILT-IN 4.5MM HANG SELL

41 – 48 mm

GROUP TYPE TOOTH MATERIAL MANDREL CUTTING DEPTH PACKAGING

HOLESAWS XP & XP2 ACCESSORIES KIT

XP TUNGSTEN CARBIDE HOLE SAWS XP TCT hole saws are ideal for repetition cutting in steel plate, stainless steel plate and synthetic resin plates up to 4mm thick. XP2 TUNGSTEN CARBIDE HOLE SAWS XP2 TCT hole saws feature 3 edged cutters which balance the cutting effort for smoother boring, greater control and reduced drag. The deep body makes them ideal for use with curved surfaces such as metal pipes.

GROUP TYPE TOOTH MATERIAL MANDREL CUTTING DEPTH PACKAGING

SMCC XP TUNGSTEN CARBIDE BUILT-IN 4.5MM HANG SELL

SMCC XP2 - DEEP CUT TUNGSTEN CARBIDE BUILT-IN 25.0MM HANG SELL

ACCESSORIES

$ EACH

PART NUMBER

$ EACH

PART NUMBER

PILOT DRILL – 6MM X 47MM TO SUIT XP PILOT DRILL – 6MM X 75MM TO SUIT XP2 EJECTOR SPRING TO SUIT XP EJECTOR SPRING TO SUIT XP2

8.84 – 4.85 –

7080-6PD – 7080-SPRING –

– 8.84 – 4.85

– 7081-6PD – 7081-SPRING

$ KIT 506.44

PART NUMBER 7080-S1

FEATURES s Non-uniform separation of the tungsten carbide teeth and integrated mandrel virtually elimates vibration due to resonance. s %XTREMELY LONG service life. s .O NEED FOR MESSY cutting fluids. s (EAVY DUTY PLUG ejector spring. APPLICATIONS s 2EPETITION CUTTING of steel plate, stainless steel plate, sheet metal and other hard or abrasive materials. Cutting Depth (mm) XP XP2 Steel 4.5 23 S/Steel 3 3+ Aluminium 3 3+

KIT TYPE XP CARBIDE CUTTER – 5 SAWS KIT CONTENTS

QTY 1 1 1 1 1 2 2

PAGE 170

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 170

DESCRIPTION

PART NUMBER

XP SAW 16MM 7080-16 XP SAW 20MM 7080-20 XP SAW 25MM 7080-25 XP SAW 32MM 7080-32 XP SAW 40MM 7080-40 XP PILOT DRILL 7080-6PD XP SPRING 7080-SPRING

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:36 PM

HOLESAWS XP & XP2 TCT MERCHANDISER

GROUP TYPE TOOTH MATERIAL MANDREL CUTTING DEPTH PACKAGING

SMCC XP TUNGSTEN CARBIDE BUILT-IN 4.5MM HANG SELL

SMCC XP2 - DEEP CUT TUNGSTEN CARBIDE BUILT-IN 25.0MM HANG SELL

MERCHANDISER TYPE XP CARBIDE CUTTER – 14 SAWS XP2 CARBIDE CUTTER– 14 SAWS MERCHANDISER CONTENTS

$ MERCHANDISER 1,642.61 –

PART NUMBER 7080-D2 –

$ MERCHANDISER – 2,347.59

PART NUMBER – 7081-D2

DESCRIPTION

PART NUMBER

DESCRIPTION

PART NUMBER

7080-16 7080-18 7080-19 7080-20 7080-22 7080-25 7080-28 7080-30 7080-32 7080-35 7080-38 7080-50 7080-60 7080-65

XP2 CUTTER 16MM XP2 CUTTER 18MM XP2 CUTTER 19MM XP2 CUTTER 20MM XP2 CUTTER 22MM XP2 CUTTER 25MM XP2 CUTTER 28MM XP2 CUTTER 30MM XP2 CUTTER 32MM XP2 CUTTER 35MM XP2 CUTTER 38MM XP2 CUTTER 50MM XP2 CUTTER 60MM XP2 CUTTER 65MM

7081-16 7081-18 7081-19 7081-20 7081-22 7081-25 7081-28 7081-30 7081-32 7081-35 7081-38 7081-50 7081-60 7081-65

XP CUTTER 16MM XP CUTTER 18MM XP CUTTER 19MM XP CUTTER 20MM XP CUTTER 22MM XP CUTTER 25MM XP CUTTER 28MM XP CUTTER 30MM XP CUTTER 32MM XP CUTTER 35MM XP CUTTER 38MM XP CUTTER 50MM XP CUTTER 60MM XP CUTTER 65MM

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 171

WWW.BORDO.COM.AU

s Non-uniform separation of the tungsten carbide teeth and integrated mandrel virtually elimates vibration due to resonance. s %XTREMELY LONG service life. s .O NEED FOR MESSY cutting fluids. s (EAVY DUTY PLUG ejector spring. APPLICATIONS s 2EPETITION CUTTING of steel plate, stainless steel plate, sheet metal and other hard or abrasive materials. Cutting Depth (mm) XP XP2 Steel 4.5 23 S/Steel 3 3+ Aluminium 3 3+

PAGE 171 21/04/12 6:36 PM

Ă&#x2DC;

10mm

Ă&#x2DC; ANLR HSS-M2 AL 50.0MM HANG SELL

SMOOTH AND FAST CUTTING

Annular Cutters achieve burr-free finished holes without the need for pre-drilling or step drilling. Faster and more accurate than using standard HSS twist drills. Bordoâ&#x20AC;&#x2122;s Annular Cutters are CNC ground and feature multi-cut geometry for smooth and fast cutting. The precision ground flutes run the entire length of the cutter providing efficient chip removal. FEATURES s INCREASED CUTTING speed. s REDUCED TOOTH LOAD s MINIMIZED TOOL WEAR s EXTENDED TOOL LIFE s CLOSE TOLERANCE drilling without runout. s REAMED QUALITY BURR free finished holes. s RESHARPENABLE

Bordo Annular Cutters feature a 3/4â&#x20AC;? universal shank that suits most standard machines including HougenÂŽ, SluggerÂŽ, RotabroachÂŽ, RotabestÂŽ and NittoÂŽ.

DIAMETER MM

PACK QTY

$ EACH

PART NUMBER

$ EACH

12.00 13.00 14.00 15.00 16.00 17.00 18.00 19.00 20.00 21.00 22.00 23.00 24.00 25.00 26.00 27.00 28.00 29.00 30.00 31.00 32.00 33.00 34.00 35.00 36.00 37.00 38.00 39.00 40.00 41.00 42.00 43.00 44.00 45.00 46.00 47.00 48.00 49.00 50.00 51.00 52.00 55.00

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

44.87 44.87 46.97 46.97 48.71 48.71 51.48 51.48 56.07 56.94 63.96 65.96 68.03 69.03 72.04 72.04 77.29 79.00 80.11 85.28 87.83 92.08 96.46 98.06 104.13 107.90 112.37 115.91 119.68 128.62 131.69 140.00 152.46 152.75 158.99 163.35 168.16 172.64 183.11 188.50 198.25 â&#x20AC;&#x201C;

7400-12X25 7400-13X25 7400-14X25 7400-15X25 7400-16X25 7400-17X25 7400-18X25 7400-19X25 7400-20X25 7400-21X25 7400-22X25 7400-23X25 7400-24X25 7400-25X25 7400-26X25 7400-27X25 7400-28X25 7400-29X25 7400-30X25 7400-31X25 7400-32X25 7400-33X25 7400-34X25 7400-35X25 7400-36X25 7400-37X25 7400-38X25 7400-39X25 7400-40X25 7400-41X25 7400-42X25 7400-43X25 7400-44X25 7400-45X25 7400-46X25 7400-47X25 7400-48X25 7400-49X25 7400-50X25 7400-51X25 7400-52X25 â&#x20AC;&#x201C;

59.18 59.18 60.35 60.35 61.66 61.66 65.43 66.93 70.42 70.42 79.27 81.27 86.28 86.28 89.05 91.59 95.36 98.30 104.13 112.60 113.37 117.44 123.38 124.69 132.99 137.93 143.47 147.54 158.08 164.32 174.40 174.40 188.64 188.64 203.42 203.42 215.51 215.51 237.06 237.06 249.60 260.91

48 mm

70 mm

Ă&#x2DC;

PART NUMBER

7400-12X50 7400-13X50 7400-14X50 7400-15X50 7400-16X50 7400-17X50 7400-18X50 7400-19X50 7400-20X50 7400-21X50 7400-22X50 7400-23X50 7400-24X50 7400-25X50 7400-26X50 7400-27X50 7400-28X50 7400-29X50 7400-30X50 7400-31X50 7400-32X50 7400-33X50 7400-34X50 7400-35X50 7400-36X50 7400-37X50 7400-38X50 7400-39X50 7400-40X50 7400-41X50 7400-42X50 7400-43X50 7400-44X50 7400-45X50 7400-46X50 7400-47X50 7400-48X50 7400-49X50 7400-50X50 7400-51X50 7400-52X50 7400-55X50

Ă&#x2DC;

63 mm

HSS ANNULAR CUTTERS

83 mm

40 mm

MULTI-CUT GEOMETRY

Ă&#x2DC;

60 mm

ANLR HSS-M2 AL 25.0MM HANG SELL

Ă&#x2DC;

40 mm

Ă&#x2DC;

GROUP MATERIAL CUTTING DEPTH PACKAGING

63 mm

NEW PRODUCT

37mm

18mm

HANG SELL

65 mm

29 mm

HSS

41 â&#x20AC;&#x201C; 48 mm

ANNULAR CUTTERS

Ă&#x2DC;

Trademarks remain the property of their respective owners.

PAGE 172

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 172

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:36 PM

ANNULAR CUTTERS HSS ACCESSORIES

GROUP MATERIAL USE WITH TO SUIT ANNULAR CUTTER DEPTH PACKAGING

ANLR HSS ANNULAR CUTTER 25.0MM BULK & HANG SELL

ANLR HSS ANNULAR CUTTER 50.0MM BULK & HANG SELL

NEW PRODUCT MULTI-CUT GEOMETRY SMOOTH AND FAST CUTTING

ANNULAR CUTTER PINS

$ EACH

PART NUMBER

$ EACH

PART NUMBER

77MM ANNULAR CUTTER PIN – BULK 77MM ANNULAR CUTTER PIN – CLAM SHELL 103MM ANNULAR CUTTER PIN – BULK 103MM ANNULAR CUTTER PIN – CLAM SHELL

6.22 7.36 – –

7400-1/4X77 7400-1/4X77S – –

– – 8.28 9.42

– – 7400-1/4X103 7400-1/4X103S

MULTI-CUT GEOMETRY

HSS ANNULAR CUTTER PINS Annular Cutter Pins perform three functions: Centering The pilot pin accurately centres the cutter over the area to be drilled. Cutting Lubricant During drilling, the pilot pin retracts and allows internal coolant to reach the cutting teeth.

SMOOTH & FAST CUTTING

Slug Ejection When hole cutting is complete, the slug is automatically ejected from the cutter.

ACCESSORY DRILL CHUCK

$ EACH 57.08

PART NUMBER 7400-DRILLCHUCK

Step hardened tooth tips retain point hardness increasing cutter performance and extending tool life. Extra large fully ground and relieved flutes reduce friction and enhance chip removal allowing increased feed rates. Alloyed HSS body absorbs high torque loads to minimise tool failure. 3/4" (19.05mm) universal shank with 2 flats and 3 dimples to suit all common magnetic base drilling machines.

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 173

WWW.BORDO.COM.AU

PAGE 173 21/04/12 6:36 PM

ANNULAR CUTTERS HSS MERCHANDISER

NEW PRODUCT

GROUP MATERIAL CUTTING DEPTH PACKAGING

ANLR HSS-M2 AL 25.0MM & 50.0MM BENCH AND HANG SELL MERCHANDISERS

MULTI-CUT GEOMETRY SMOOTH AND FAST CUTTING

HSS ANNULAR CUTTERS Annular Cutters achieve burr-free finished holes without the need for pre-drilling or step drilling. Faster and more accurate than using standard HSS twist drills.

MERCHANDISER TYPE LARGE BENCH MERCH â&#x20AC;&#x201C; 24 CUTTERS SMALL BENCH MERCH â&#x20AC;&#x201C; 18 CUTTERS HANG SELL MERCH â&#x20AC;&#x201C; 18 CUTTERS MERCHANDISER CONTENTS

$ MERCHANDISER 1,747.94 â&#x20AC;&#x201C; â&#x20AC;&#x201C;

PART NUMBER 7400-D2 â&#x20AC;&#x201C; â&#x20AC;&#x201C;

$ MERCHANDISER â&#x20AC;&#x201C; 1,377.66 â&#x20AC;&#x201C;

PART NUMBER â&#x20AC;&#x201C; 7400-D3 â&#x20AC;&#x201C;

$ MERCHANDISER â&#x20AC;&#x201C; â&#x20AC;&#x201C; 1,389.06

PART NUMBER â&#x20AC;&#x201C; â&#x20AC;&#x201C; 7400-D1

DESCRIPTION

PART NUMBER

DESCRIPTION

PART NUMBER

DESCRIPTION

PART NUMBER

12MM X 25MM 13MM X 25MM 14MM X 25MM 16MM X 25MM 17MM X 25MM 18MM X 25MM 20MM X 25MM 22MM X 25MM 24MM X 25MM 26MM X 25MM 28MM X 25MM 30MM X 25MM 32MM X 25MM 12MM X 50MM 14MM X 50MM 16MM X 50MM 18MM X 50MM 20MM X 50MM 22MM X 50MM 24MM X 50MM 26MM X 50MM 28MM X 50MM 30MM X 50MM 32MM X 50MM PIN â&#x20AC;&#x201C; 103MM PIN â&#x20AC;&#x201C; 77MM

Bordoâ&#x20AC;&#x2122;s Annular Cutters are CNC ground and feature multi-cut geometry for smooth and fast cutting. The precision ground flutes run the entire length of the cutter providing efficient chip removal. FEATURES s INCREASED CUTTING speed. s REDUCED TOOTH LOAD s MINIMIZED TOOL WEAR s EXTENDED TOOL LIFE s CLOSE TOLERANCE drilling without runout. s REAMED QUALITY BURR free finished holes. s RESHARPENABLE

Bordo Annular Cutters feature a 3/4â&#x20AC;? universal shank that suits most standard machines including HougenÂŽ, SluggerÂŽ, RotabroachÂŽ, RotabestÂŽ and NittoÂŽ.

7400-12X25 7400-13X25 7400-14X25 7400-16X25 7400-17X25 7400-18X25 7400-20X25 7400-22X25 7400-24X25 7400-26X25 7400-28X25 7400-30X25 7400-32X25 7400-12X50 7400-14X50 7400-16X50 7400-18X50 7400-20X50 7400-22X50 7400-24X50 7400-26X50 7400-28X50 7400-30X50 7400-32X50 7400-1/4X103 7400-1/4X77

14MM X 25MM 16MM X 25MM 18MM X 25MM 20MM X 25MM 22MM X 25MM 24MM X 25MM 26MM X 25MM 30MM X 25MM 32MM X 25MM 14MM X 50MM 16MM X 50MM 18MM X 50MM 20MM X 50MM 22MM X 50MM 24MM X 50MM 26MM X 50MM 30MM X 50MM 32MM X 50MM PIN â&#x20AC;&#x201C; 103MM PIN â&#x20AC;&#x201C; 77MM â&#x20AC;&#x201C; â&#x20AC;&#x201C; â&#x20AC;&#x201C; â&#x20AC;&#x201C; â&#x20AC;&#x201C; â&#x20AC;&#x201C;

7400-14X25 7400-16X25 7400-18X25 7400-20X25 7400-22X25 7400-24X25 7400-26X25 7400-30X25 7400-32X25 7400-14X50 7400-16X50 7400-18X50 7400-20X50 7400-22X50 7400-24X50 7400-26X50 7400-30X50 7400-32X50 7400-1/4X103 7400-1/4X77 â&#x20AC;&#x201C; â&#x20AC;&#x201C; â&#x20AC;&#x201C; â&#x20AC;&#x201C; â&#x20AC;&#x201C; â&#x20AC;&#x201C;

7400-14X25 7400-16X25 7400-18X25 7400-20X25 7400-22X25 7400-24X25 7400-26X25 7400-30X25 7400-32X25 7400-14X50 7400-16X50 7400-18X50 7400-20X50 7400-22X50 7400-24X50 7400-26X50 7400-30X50 7400-32X50 7400-1/4X103S 7400-1/4X77S â&#x20AC;&#x201C; â&#x20AC;&#x201C; â&#x20AC;&#x201C; â&#x20AC;&#x201C; â&#x20AC;&#x201C; â&#x20AC;&#x201C;

Trademarks remain the property of their respective owners.

PAGE 174

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 174

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:37 PM

Ø Ø Ø

SCREW PUNCHES CHASSIS HANG SELL

GROUP MATERIAL CAPACITY - PLASTIC CAPACITY - MILD STEEL CAPACITY - STAINLESS STEEL PACKAGING

DIAMETER MM

DIAMETER INCH EQUIV.

PACK QTY

$ EACH

PART NUMBER

12.70 16.00 19.00 20.00 22.00 22.50 25.00 25.40 28.30 30.00 32.00 32.50 35.00 38.00 40.00 45.00 48.00 50.00 51.00

1/2 5/8 3/4 – 7/8 – – 1 – – 1-1/4 – 1-3/8 1-1/2 – – 1-7/8 – 2

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

51.17 51.17 56.73 56.73 62.29 62.29 62.29 62.29 62.29 70.08 70.08 70.08 85.65 85.65 105.68 122.36 127.93 139.05 139.05

7086-12.7 7086-16.0 7086-19.0 7086-20.0 7086-22.0 7086-22.5 7086-25.0 7086-25.4 7086-28.3 7086-30.0 7086-32.0 7086-32.5 7086-35.0 7086-38.0 7086-40.0 7086-45.0 7086-48.0 7086-50.0 7086-51.0

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 175

SCWP CHROME ALLOY STEEL 8.0MM 3.0MM 1.5MM HANG SELL

WWW.BORDO.COM.AU

SCREW (CHASSIS) PUNCH A screw punch, also known as a chassis punch or a knockout punch, is used to punch a hole through sheet metal.

USAGE First drill a pilot hole in the sheet metal the same size as the bolt in the punch. For sizes 13mm and under a jobber drill may be used. For larger sizes use a Bordo step drill. Place the die on to the bolt and then insert this assembly through the pilot hole. Wind the punch onto the bolt and tighten by hand until firm. Turn hex head of bolt with a socket, spanner or wrench until the punch is drawn completely through the sheet metal.

PAGE 175 21/04/12 6:37 PM

10 PACK

BI-METAL HACKSAW BLADES

10 PACK

HACKSAW HANG SELL

INDUSTRIAL TOOLS

300 x 13 x 0.65mm

32TPI

ITEM NO. 7255-32

300 x 13

300 x BI-METAL 13 xINDUSTRIAL 0.65mm 32TPI ITEM NO. 7255-32 300 xBI-METAL 13 xINDUSTRIAL 0.65mm 32TPI ITEM NO. 7255-32 300 xBI-METAL 13 x 0.65mm 32TPI ITEM NO. 7255-32 COBALT BI-METAL Flexible Shatterproof COBALT Flexible Shatterproof COBALT Flexible Shatterproof COBALT Flexible Shatterproof INDUSTRIAL TOOLS TOOLS TOOLS

300 x 13

ITEM NO. 7255-32

MADE IN U.S.A. 12" (300mm) x 18/24 VARIABLE

ITEM NO. 7250-AG1220

PART NUMBER 7250-1218ULT 7250-1224ULT 7250-1232ULT

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:37 PM

ITEM NO. 7255-32

32TPI

BI-METAL HSS ITEM NO. EDGE 7250-AG1220

32TPI

ITEM NO. 7255-32

300 x 13 x 0.65mm

32TPI

300 x 13 x 0.65mm

$ PACK 44.50 44.50 44.50

PART NUMBER 7255-18T 7255-24T 7255-32T

300 x 13 x 0.65mm

ITEM NO. 7250-AG1220

COBALT BI-METAL Flexible Shatterproof

ITEM NO. 7255-32

ITEM NO.BI-METAL 7255-32Flexible Shatterproof COBALT

ITEM NO. 7255-32

INDUSTRIAL TOOLS

32TPI

INDUSTRIAL TOOLS

32TPI

$ PACK 55.50 55.50 55.50

PART NUMBER 7260-18 7260-24 7260-32

COBALT BI-METAL Flexible Shatterproof

32TPI

300 x 13 x 0.65mm

MADE IN U.S.A. 12" (300mm) x 18/24 VARIABLE

ITEM NO. 7250-AG1220

300 x 13 x 0.65mm

BI-METAL HSS EDGE

INDUSTRIAL TOOLS

$ EACH 1.64 1.64 1.64

300 x 13 x 0.65mm

ITEM NO. 7255-32

ITEM NO. 7250-AG1220

COBALT BI-METAL Flexible Shatterproof

MADE IN U.S.A. 12" (300mm) x 18/24 VARIABLE

32TPI

HACK HIGH CARBON – REGULAR PITCH 13MM (1/2") 0.46MM (0.025") BULK HANG PACK

INDUSTRIAL TOOLS

BI-METAL HSS EDGE

300 x 13 x 0.65mm

10 PACK

COBALT HACKSAW BLADES

10 PACK

PART NUMBER 7251-18 7251-24 7251-32

10 PACK

COBALT BI-METAL Flexible Shatterproof

BI-METAL, M3 EDGE HSS 10 PACK CLAM SHELL

PACK QTY 10 10 10

$ EACH 3.65 3.65 3.65

COBALT HACKSAW BLADES

BI-METAL, M4 EDGE COBALT 10 PACK CLAM SHELL

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 176

COBALT BI-METAL Flexible Shatterproof

18 24 32

COBALT BI-METAL Flexible Shatterproof

10 PACK

INDUSTRIAL TOOLS

ITEM NO.BI-METAL 7255-32Flexible Shatterproof COBALT

TPI

INDUSTRIAL TOOLS

BI-METAL HACKSAW BLADES

10 PACK

INDUSTRIAL TOOLS

LENGTH MM INCH 300 12 300 12 300 12

PAGE 176

COBALT HACKSAW BLADES

INDUSTRIAL TOOLS

ITEM NO. 7250-AG1220

MATERIAL BI-METAL MATERIAL PACKAGING

ITEM NO. 7255-32

HACK HIGH SPEED STEEL – REGULAR PITCH 13MM (1/2") 0.46MM (0.025") BULK HANG PACK

PART NUMBER 7250-1218UL 7250-1224UL 7250-1232UL

32TPI

HIGH SPEED STEEL FLEXIBLE Flexible high speed steel blade for increased wear resistance and superior cutting life. HIGH CARBON FLEXIBLE Professional quality blade manufactured from flexible hi-carbon steel for general purpose cutting in a wide range of materials.

$ EACH 4.27 4.27 4.27

MADE IN U.S.A. 12" (300mm) x 18/24 VARIABLE

10 PACK

PART NUMBER 7255-18 7255-24 7255-32

300 x 13 x 0.65mm

BI-METAL HACKSAW BLADES

BI-METAL HSS EDGE

$ EACH 5.30 5.30 5.30

COBALT HACKSAW BLADES

32TPI

MADE IN U.S.A. 12" (300mm) x 18/24 VARIABLE

COBALT BI-METAL Flexible Shatterproof

18 24 32

PACK QTY 100 100 100

HACK BI-METAL, M3 EDGE HSS REGULAR PITCH 13MM (1/2") 0.46MM (0.025") BULK HANG PACK

INDUSTRIAL TOOLS

TPI

MADE IN U.S.A. 12" (300mm) x 18/24 VARIABLE

ITEM NO. 7255-32

LENGTH MM INCH 300 12 300 12 300 12

BI-METAL HSS EDGE

32TPI

BI-METAL M3 EDGE FLEXIBLE SHATTERPROOF High speed steel cutting edge welded to tough flexible alloy steel producing a blade with superior cutting life and resistance to breakage.

BI-METAL HSS EDGE

MADE IN U.S.A. 12" (300mm) x 18/24 VARIABLE

300 x 13 x 0.65mm

BI-METAL M42 EDGE 5% COBALT FLEXIBLE SHATTERPROOF High speed steel cutting edge with 5% Cobalt welded to tough flexible alloy steel producing a blade with superior cutting life and resistance to breakage. Will cut any metals including alloys, steels and stainless steels. Long lasting, and hard wearing.

HACK BI-METAL, M42 EDGE 5% COBALT REGULAR PITCH 13MM (1-2") 0.46MM (0.025") BULK HANG PACK

BI-METAL HSS EDGE

COBALT BI-METAL Flexible Shatterproof

REGULAR PITCH A standard tooth configuration that produces an efficient cut on all types of materials.

COBALT HACKSAW BLADES

INDUSTRIAL TOOLS

NEW PRODUCT

GROUP MATERIAL BI-METAL MATERIAL TOOTH CONFIGURATION HEIGHT THICKNESS PACKAGING

300 x 13 x 0.65mm

10 PACK

COBALT BI-METAL Flexible Shatterproof 10 PACK

INDUSTRIAL TOOLS

PACK

BI-METAL HACKSAW BLADES

OBALT CKSAW ADES

10 PACK

BI-METAL HACKSAW BLADES

10 PACK

SAW BLADES

SAW BLADES HACKSAW HANG SELL BI-METAL HSS EDGE

MADE IN U.S.A. 12" (300mm) x 18/24 VARIABLE

ITEM NO. 7250-AG1220

GROUP MATERIAL BI-METAL MATERIAL TOOTH CONFIGURATION HEIGHT THICKNESS PACKAGING

LENGTH MM INCH 300 12 300 12 300 12

HACK BI-METAL, M3 EDGE M3 HSS VARIABLE PITCH 13MM 0.46MM BULK HANG PACK

TPI 14 / 18 18 / 24 24 / 32

PACK QTY 100 100 100

GROUP MATERIAL HEIGHT PACKAGING LENGTH MM INCH 300 12

PART NUMBER 7250-AG1216 7250-AG1220 7250-AG1228

REMG TUNGSTEN CARBIDE GRIT 19MM HANG SELL

TPI

PACK QTY 1

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 177

$ EACH 5.11 5.11 5.11

$ EACH 12.12

VARIABLE PITCH BI-METAL M3 EDGE The variable tooth pitch minimises vibration whilst cutting. The spring steel back and variable tooth configuration allows smoother cutting for an optimal work finish.

PART NUMBER 7093-GH12C

WWW.BORDO.COM.AU

TUNGSTEN CARBIDE HACKSAW BLADES Carbide grit particles are permanently bonded to an alloy steel blade. TCG hacksaw blades are designed to cut materials that standard hacksaw blades won’t even scratch. They are ideal for straight cuts in hardened steel chain and bolts as well as ceramic tiles, stranded cable, hydraulic hose and even glass.

PAGE 177 21/04/12 6:37 PM

SAW BLADES

OBALT CKSAW ADES

PACK

HACKSAW MERCH & FRAME INDUSTRIAL TOOLS

INDUSTRIAL TOOLS

NEW PRODUCT

COBALT BI-METAL Flexible Shatterproof

300 x 13 x 0.65mm

32TPI ITEM NO. 7255-32

BI-METAL M3 EDGE FLEXIBLE SHATTERPROOF High speed steel cutting edge welded to tough flexible alloy steel producing a blade with superior cutting life and resistance to breakage.

NEW PRODUCT

COBALT BI-METAL Flexible Shatterproof

GROUP MATERIAL TOOTH CONFIGURATION HEIGHT THICKNESS PACKAGING

BI-METAL & VARIABLE – 300 BLADES BI-METAL – 300 BLADES BI-METAL & COBALT – 300 BLADES

$ MERCHANDISER 1,407.00 – –

MERCHANDISER CONTENTS

HI-TENSION FRAME HEAVY DUTY FRAME

BORDO INDUSTRIAL TOOLS

PART NUMBER 7250-D1 – –

$ MERCHANDISER – 1,281.00 –

ITEM NO. 7250-AG1220

PART NUMBER – 7250-D2 –

$ MERCHANDISER – – 1,435.50

PART NUMBER – – 7250-D3

QTY

PART NUMBER

QTY

PART NUMBER

QTY

PART NUMBER

50 50 50 50 50 50

7250-1218UL 7250-1224UL 7250-1232UL 7250-AG1216 7250-AG1220 7250-AG1228

100 100 100 – – –

7250-1218UL 7250-1224UL 7250-1232UL – – –

50 50 50 50 50 50

7250-1218UL 7250-1224UL 7250-1232UL 7255-18 7255-24 7255-32

GROUP TYPE SIZE PACKAGING

18193_Bordo_BuyersGuide_082011_PJ32.indd 178

ITEM NO. 7255-32

MADE IN U.S.A. 12" (300mm) x 18/24 VARIABLE

DESCRIPTION

PAGE 178

32TPI

HACK BI-METAL, M3 EDGE & BI-METAL, M4 EDGE REGULAR & VARIABLE VARIBALE PITCH 13MM 0.46MM MULTI-USE BENCH & HANG HAND SELL MERCHANDISER

BI-METAL HSS EDGE

MERCHANDISER TYPE

300 x 13 x 0.65mm

HACK HI-TENSION FRAME 300MM (12") DISPLAY BOX OF 10

$ EACH 45.37 –

PART NUMBER 7268-1 –

HACK HEAVY DUTY DRAME 300MM (12") DISPLAY BOX OF 10

$ EACH – 67.28

PART NUMBER – 7268-2

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:38 PM

SAW BLADES AIR SAW ROD SAW

GROUP MATERIAL CUTTING EDGE PACKAGING

LENGTH MM INCH 75 3 75 3 75 3 100 4 100 4 125 5

AGRS BI-METAL, M3 EDGE MATRIX II HANG SELL

TPI

USAGE

18 24 32 18 32 18

METALS OVER 1/8"(3.2MM) THICK METALS 1/16" (1.6MM) TO 1/8" [3.2MM) THICK METALS 1/16" (1.6MM) AND THINNER METALS OVER 1/8" (3.2MM) THICK CONDUIT, PIPE & TUBING METALS 1/16" (1.6MM) & THINNER HEAVY GAUGE METALS

LENGTH TPI USAGE MM INCH AIR SAW BLADE ASSORTMENT – 5 PIECE PACK 75 3 18 METALS OVER 1/8” (3.2MM) THICK 75 3 24 METALS 1/16” (1.6MM) TO 1/8” [3.2MM) THICK 75 3 32 METALS 1/16” (1.6MM) AND THINNER 100 4 18 METALS OVER 1/8” (3.2MM) THICK 100 4 32 CONDUIT, PIPE & TUBING METALS 1/16" (1.6MM) & THINNER

PACK QTY 5 5 5 5 5 5

$ EACH 34.04 34.04 34.04 34.04 34.04 47.38

PART NUMBER 7200-70872 7200-70874 7200-70876 7200-70882 7200-70886 7200-70888

PACK QTY

$ EACH 30.00

PART NUMBER 7200-70860

1 1 1 1 1

GROUP MATERIAL PACKAGING

LENGTH MM INCH 150 6 300 12

REMG TUNGSTEN CARBIDE GRIT HANG SELL

DESCRIPTION 150MM TUNSGTEN CARBIDE GRIT ROD SAW 300MM TUNSGTEN CARBIDE GRIT ROD SAW

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 179

PACK QTY 1 1

$ EACH 7.37 10.01

PART NUMBER 7093-GG6C 7093-GG12C

WWW.BORDO.COM.AU

TUNGSTEN CARBIDE GRIT ROD SAWS Carbide grit particles are permanently bonded to a heavy duty alloy steel rod. TCG rod saws can be used in place of bolt cutters, acetylene cutting torches and abrasive cut-off wheels. Rod saws are able to cut “unsawable materials” such as glass, ceramic tiles and hardened steel. They cut in both directions and are can be used in tight spaces where alternative cutting solutions don’t fit.

PAGE 179 21/04/12 6:38 PM

SAW BLADES RECIPROCATING HANG SELL

XTREME RECIPROCATING SAW BLADES Bi-Metal with Cobalt Demolition Saw Blades are extra thick for heavy duty cutting and long life. 14 TPI Demolition & Rescue Saw Blades s &OR CUTTING PIPE angle iron, nail embedded wood and structural steel. s 7IDER MM n v and thicker (1.1mm â&#x20AC;&#x201C; .042â&#x20AC;?) blades for demolition work. s !VAILABLE IN MM (6â&#x20AC;?), 229mm (9â&#x20AC;?) and 305mm (12â&#x20AC;?) lengths with 1/2â&#x20AC;? universal shanks. 6 TPI Wrecking Saw Blades s &OR CUTTING WOOD sleepers and other tough materials. s 7IDER MM n v and thicker (1.6mm â&#x20AC;&#x201C; .062â&#x20AC;?) blades for demolition work. s !VAILABLE IN MM (6â&#x20AC;?), 229mm (9â&#x20AC;?) and 305mm (12â&#x20AC;?) lengths with 1/2â&#x20AC;? universal shanks and structural steel.

NEW RANGE

GROUP TYPE MATERIAL PACKAGING

LENGTH TPI MM INCH DEMOLITION / GENERAL USE 152 6 14 229 9 14 305 12 14 WRECKING / ROUGH CUT WOOD 152 6 6 229 9 6 305 12 6

THICKNESS MM INCH

USAGE

PACK QTY

$ EACH

PART NUMBER

1.1 1.1 1.1

0.042 0.042 0.042

DEMOLITION & RESCUE DEMOLITION & RESCUE DEMOLITION & RESCUE

1 1 1

7.26 11.23 13.93

7202-6489 7202-6490 7202-6491

1.6 1.6 1.6

0.062 0.062 0.062

WRECKING WRECKING WRECKING

1 1 1

8.86 12.89 18.12

7202-6486 7202-6487 7202-6488

GROUP TYPE MATERIAL PACKAGING

LENGTH TPI MM INCH WOOD 152 6 6 152 6 10 229 9 6 305 12 6 METAL 76 3 14 152 6 14 152 6 18 152 6 24 203 8 18 GENERAL PURPOSE 203 8 10/14 305 12 10/14

PAGE 180

AGRS XTREME BI-METAL 8% COBALT HANG SELL

AGRS AGGRESSOR BI-METAL 8% COBALT HANG SELL

THICKNESS MM INCH

PACK QTY

$ PACK

PART NUMBER

1.3 1.3 1.3 1.3

0.05 0.05 0.05 0.05

WOOD GENERAL PURPOSE WOOD GENERAL PURPOSE WOOD GENERAL PURPOSE WOOD GENERAL PURPOSE

5 5 5 5

45.94 38.00 62.12 76.02

7200-AG608 7200-AG310 7200-AG906 7200-AG1208

0.9 0.9 0.9 0.9 0.9

0.035 0.035 0.035 0.035 0.035

METAL METAL METAL METAL METAL

5 5 5 5 5

29.22 38.00 38.00 38.00 57.01

7200-AG114 7200-AG314 7200-AG318 7200-AG324 7200-AG418

0.9 1.3

0.035 0.05

COMBINATION BLADE COMBINATION BLADE

5 5

57.01 70.34

7200-AG410 7200-AG1210

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 180

USAGE

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:38 PM

SAW BLADES RECIPROCATING HANG SELL

GROUP TYPE MATERIAL BLADE HEIGHT PACKAGING

LENGTH MM INCH GRIT EDGE 152 6

REMG GRIT EDGE TUNGSTEN CARBIDE GRIT 19MM HANG SELL

TPI GRIT

THICKNESS MM INCH -

USAGE

PACK QTY

$ EACH

PART NUMBER

TUNGSTEN CARBIDE GRIT – COARSE

10.93

7092-GR24C

GROUP TYPE MATERIAL PACKAGING

MERCHANDSIER TYPE XTREME RECIPS – 60 BLADES MERCHANDISER CONTENTS

AGRS XTREME BI-METAL 8% COBALT COMBINATION BENCH / WALL MOUNT MERCHANDISER

$ MERCHANDISER 722.90 QTY 10 10 10 10 10 10

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 181

DESCRIPTION 152MM DEMO & RESCUE 229MM DEMO & RESCUE 305MM DEMO & RESCUE 152MM WRECKING 229MM WRECKING 305MM WRECKING

TUNGSTEN CARBIDE RECIP. BLADES Carbide grit particles are permanently bonded to an alloy steel blade. TCG reciprocating saw blades are designed to cut materials that standard blades won’t even scratch. They are ideal for cutting hardened steel chain and bolts as well as ceramic tiles, stranded cable, hydraulic hose and even concrete block and pavers. When using TCG recip blades to cut masonry products it is best to use a sawing action to help clear material from the cut to maximise blade efficiency.

PART NUMBER 7202-D1 PART NUMBER 7202-6489 7202-6490 7202-6491 7202-6486 7202-6487 7202-6488

WWW.BORDO.COM.AU

PAGE 181 21/04/12 6:38 PM

SAW BLADES JIG SAW T-SHANK (EURO)

JIGSAW BLADE SELECTION CHART GROUP

SINGLE LUG JIGS

SYNTHETICS METALS MISCELLANEOUS T-SHANK (EURO) PVC Acrylic Ferrous NonTIMBER Alumin. Sandwich Fibre Ceramic Ce HANG SELL Cut Cut (Steel) Ferrous Material Glass /Glass S

31113

30970

31120

30987

31137

30994

31144

T-SHANK (EURO SHANK) – TIMBER & SYNTHETICS 31007 100mm 100mm 100mm – 100mm ✔ ✔

31151

31014

30mm

60mm

PITCH

60mm

–

≤ 30

60mm

31113

60mm

TIMBER PRECISE CUT

PACK

PART #

$ PACK

PART #

–

60mm

–

60mm

–

7110-31120

15.24

–

31182

31038 60mm 60mm – – 60mm – – – – – TIMBER UP TO 30MM. IDEAL FOR PRECISE, STRAIGHT, CLEAN CUTS IN HARDWOOD, SOFTWOOD, PLYWOOD, CHIPBOARD, MDF AND SYNTHETICS. DOWN CUT.

7110-30987

–

31199

–

31205

–

– 7110-30994

–

31212

–

31229

–

31236

7.94 18.38 – ≤ 100 – ✔ ✔ – ✔ – – ALLOY 132 4.0 T301DL 7110-31144 31045 – – CLEAN CUTS – IN HARDWOOD, – SOFTWOOD, – CHIPBOARD, 3mm MDF AND 3mm 3mm TIMBER UP TO 100MM. IDEAL–FOR FAST, STRAIGHT, SYNTHETICS.

–

31069

31243

≤ 60 31052

31250

31076

31267

31083

31274

31090

–

31281

31106

31175

31298

–

≤ 30

60mm

–

31021

≤ 30

60mm

–

PACK

–

2– 2– 5– 5–

31175

≤ 30

60mm

≤ 30

–

$ PACK

–

6.29 14.25 – – – – – ALLOY 100 2.5 T101B 7110-31113 7110-30970 TIMBER UP TO 30MM. IDEAL FOR PRECISE, STRAIGHT, CLEAN CUTS IN HARDWOOD, SOFTWOOD, PLYWOOD, CHIPBOARD, MDF AND SYNTHETICS. ≤ 30

–

BOSCH EQUIVALENT

30mm LENGTH MM

30mm

FAST CUT CLEAN CUT ROUGH CUT STRAIGHT CUT CURVED CUT DOWN CUT

30mm

ACRYLIC MM

30mm PVC MM

30mm

CHIPBOARD AND MDF MM LAMINATED PARTICLE BOARD MM

PLYWOOD MM

SOLID TIMBER MM

NEW

BLADE MATERIAL

7110- PART # PREFIX TIMBER SHANK Part # PartTYPE # Solid Plywood Chipboard Laminated PRODUCT5 PACK PACKAGINGTimber 2 PACK & MDF Part. Board

–

– ✔ – ✔ – ✔ ALLOY

DOWN CUT– 30mm TIMBER 30mm 31120

–

100

2.5

T101BR

30mm 30mm

6.68

–

50mm – – – ✔ ✔– – ✔ – – –ALLOY 100 6.29 14.25 4.0 50mm T101D 7110-31137 TIMBER UP TO 60MM. IDEAL FOR FAST, STRAIGHT, CLEAN CUTS IN HARDWOOD, SOFTWOOD, CHIPBOARD, MDF AND SYNTHETICS. ≤ 60

≤ 60

50mm ≤ 60 ≤ 60 50mm ≤ 60 – 20mm

31137

20mm

–

TIMBER FAST CUT

–

20mm 20mm –

–

1.2mm 1.2mm 1.2mm

≤ 100 ≤ 100 ≤ 100

31144–

–

TIMBER FAST CUT LONG

–

3mm

5.27 ≤ 60 ≤ 60 T144D – ≤ 60 –– – ✔ –– – ✔ – – –ALLOY 100 – 4.0 3mm 3mm TIMBER UP TO 60MM. HIGH SPEED, STRAIGHT CUTS IN HARDWOOD, SOFTWOOD, CHIPBOARD AND MDF.

–

31151

–

– HIGH SPEED – TIMBER

–

6mm

–

3mm

–

85mm 85mm

–

20mm

5.62 – – ✔ – – – ✔ – ALLOY 100 4.0 T244D TIMBER UP TO 60MM. HIGH SPEED, CURVED CUTS IN HARDWOOD, SOFTWOOD, CHIPBOARD AND MDF. ≤ 60

≤ 60

–

≤ 60

TIMBER CURVED CUT

–

6mm –

4.21 ≤ 60 ≤ 60 – – ≤ 60 – ✔ – ✔ ✔ – – ALLOY 100 3.0 T111C – – – – – – – TIMBER UP TO 60MM. FOR FAST, STRAIGHT, ROUGH CUTS IN HARDWOOD, SOFTWOOD AND PLASTIC.

31182

7110-31007

3mm

–

7110-31151 3mm

11.70 3mm

7110-31014 –

–

6mm

–

3mm

3mm 12.58

7110-31021

65mm

–

6mm

85mm

–

20mm

–

7110-31175

20mm 20mm 7110-31182

–

9.04

–

7110-31038

–

15mm 15mm

TIMBER ROUGH CUT

3.93 – ≤ 30 ≤ 30 – – ≤ 30 ≤ 30 – – – ✔ – – ALLOY 75 2.0 T119B 7110-31199 – TIMBER & ACRYLIC UP TO 30MM. FOR STRAIGHT CUTS IN HARDWOOD, SOFTWOOD, PLYWOOD, INSULATION MATERIALS, PLASTIC AND ACRYLIC GLASS.

31199

TIMBER AND ACRYLIC

31205

4.32 – ≤ 20 ≤ 20 ≤ 20 – ≤ 20 ≤ 20 – – – – ✔ – ALLOY 75 2.0 T119BO 7110-31212 – TIMBER & ACRYLIC UP TO 20MM. FOR CURVED CUTS IN HARDWOOD, SOFTWOOD, PLYWOOD, INSULATION MATERIALS, PLASTIC AND ACRYLIC GLASS.

2.5 MM

31212

PAGE 182

TIMBER AND ACRYLIC

100

4-30 MM

4.52 – ≤ 50 ≤ 50 – – ≤ 50 ≤ 50 – – – ✔ – – ALLOY 100 2.0 – 7110-31205 – TIMBER & ACRYLIC UP TO 50MM. FOR STRAIGHT CUTS IN HARDWOOD, SOFTWOOD, PLYWOOD, INSULATION MATERIALS, PLASTIC AND ACRYLIC GLASS.

30970

TIMBER AND ACRYLIC

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 182

TIMBER PRECISE CUT

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 26/04/12 5:02 PM

SAW BLADES JIG SAW T-SHANK (EURO)

JIGSAW BLADE SELECTION CHART GROUP

SINGLE LUG JIGS

30970

31120

30987

31137

30994

30mm

60mm

PITCH

60mm

–

BOSCH EQUIVALENT

30mm

LENGTH MM

30mm

FAST CUT CLEAN CUT ROUGH CUT STRAIGHT CUT CURVED CUT DOWN CUT

30mm

ACRYLIC MM

30mm

PVC MM

30mm

SANDWICH MATERIAL MM

30mm ALUMINIUM MM

30mm

BLADE MATERIAL

31113

NON-FERROUS MM

SYNTHETICS METALS MISCELLANEOUS T-SHANK (EURO) PVC Acrylic Ferrous NonMETAL Alumin. Sandwich Fibre Ceramic Ce PRODUCT HANG SELL Cut Cut (Steel) Ferrous Material Glass /Glass S

FERROUS (STEEL) MM

7110- PART # PREFIX TIMBER SHANK Part # PartTYPE # Solid Plywood Chipboard Laminated PACKAGINGTimber 2 PACK 5 PACK & MDF Part. Board

–

NEW

–

31151

31014

60mm

METAL EXTRA THIN

31229

–

PACK

–

PACK

–

PACK

–

PACK

PART # –

60mm

–

60mm

–

T118A

6.08

7110-31236

13.89

–

7110-31045

–

– 14.59

– 7110-31069

–

7110-31076 –

–

31182

31038 60mm 60mm – – 60mm – – – THIN METALS 1.5 TO 3.0MM. STRAIGHT CUTS IN THIN METALS. FERROUS, NON-FERROUS, SHEET METAL AND ALUMINIUM.

31199

–

31205

–

31212

–

31229

–

31236

7.06 16.34 3 3 3 – – 3 – – – ✔ – – BiM 75 1.2 T118AF 7110-31243 7110-31052 31045 – – – BLADE. FERROUS, – 3mm 3mm 3mm & ACRYLIC.– THIN METALS 1.5–TO 3.0MM. STRAIGHT CUTS. BI-METAL FLEXIBLE–& SHATTERPROOF NON-FERROUS, STAINLESS, ALUMINIUM

–

31069

31243

310526

31250

31076

31267

31083

31274

31090

30mm 31236

–

60mm

–

31021 3

60mm

–

31175

60mm

–

2– 2– 5– 5–

$ PACK PART # $ PACK T-SHANK (EURO SHANK) – METAL, SYNTHETICS & MISCELLANEOUS 31007 100mm 100mm 100mm✔ – 100mm – – – – 6.08 – 1.2 1.2 1.2 – – – – – – – – HSS 75 0.9 T118G 7110-31229 THIN METALS 0.9 TO 1.2MM. STRAIGHT CUTS IN EXTRA THIN METALS. FERROUS, NON-FERROUS, SHEET METAL AND ALUMINIUM.

31144

–

– – – ✔ – –

30mmTHIN METAL

–

HSS

–

1.2

30mm 30mm

–– 3 3 50mm 3 – 50mm – – – –– – – ✔ – – HSS 7550mm 1.2 50mm T218A –– THIN METALS 1.5 TO 3.0MM. CURVED CUTS IN THIN METALS. FERROUS, NON-FERROUS, SHEET METAL AND ALUMINIUM.

20mm

31069

20mm

–

METAL CURVED

–

31243

–

METAL THIN

–

20mm 20mm –

–

1.2mm 1.2mm 1.2mm 3mm

3mm

6.08 13.89 6 6– – –– – – –– – ✔ – – – HSS 75 – 2.0 3mm T118B 7110-31250 3mm 3mm 3mm METALS 3.0 TO 6.0MM. STRAIGHT CUTS IN MEDIUM-THICK METALS. FERROUS, NON-FERROUS, SHEET METAL AND ALUMINIUM.

–

31250

– MEDIUM METAL

–

6mm

–

3mm

65mm

–

85mm 85mm

6mm

85mm

–

20mm

–

20mm

–

9.23 21.75 3 3 3 65 – – – – – ✔ – – HSS 132 1.2 T318A 7110-31267 7110-31083 METALS 1.5–3.0MM, SANDWICH 1.5–65.0MM. STRAIGHT CUTS IN METALS & SANDWICH MATERIALS. FERROUS, NON-FERROUS, SHEET METAL & ALUMINIUM.

31281

31106

31298

–

31267

–

METAL & SANDWICH

–

20mm 20mm

10.62 25.25 6 6 6 85 85 85 – – – ✔ – – BiM 132 2.0 T318BF 7110-31274 – – – – – – – – – METALS 2.0–6.0MM, SANDWICH 2.0–85.0MM. SAME AS 7110-31267 ABOVE WITH BI-METAL FLEXIBLE & SHATTERPROOF BLADE.

7110-31090

–

METAL & SANDWICH

31274

7.16 16.60 – 20 20 – 20 – ✔ – – ✔ – – HSS 100 3.0 T127D 7110-31281 7110-31106 ALUMINIUM 2.0–20.0MM. FAST, STRAIGHT CUTS IN ALUM., NON-FERROUS METALS, FIBREGLASS REINFORCED SYNTHETICS, FIBRE CEMENT SHEET & PLASTIC.

PERFECT FOR FIBRE CEMENT SHEET

METAL ALUMINIUM

100

4-30 MM

31281

15mm 15mm

T-SHANK (EURO SHANK) – CERAMICS, GLASS, FIBRE CEMENT SHEET 13.98 – – – – – – – – – ✔ – – TCG 75 – T130RIFF 7110-31298 ABRASIVE 1.0–15.0MM. PRECISE, STRAIGHT CUTS IN CERAMICS, GLASS, FIBRE CEMENT SHEET AND FIBREGLASS REINFORCED SYNTHETICS.

30970

ABRASIVE MATERIALS

2.5 MM

31298

PERFECT FOR CERAMICS AND FIBRE CEMENT SHEET

TIMBER PRECISE CUT

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 183

–

WWW.BORDO.COM.AU

PAGE 183 26/04/12 5:02 PM

SAW BLADES JIG SAW UNIVERSAL SHANK

JIGSAW BLADE SELECTION CHART

UNIVERSAL

7110- PART # PREFIX TIMBER SYNTHETICS METALS GROUP JIGSMISCELLANEOUS Part # Part #SHANK Solid Plywood Chipboard Laminated PVC Acrylic Ferrous Non Alumin. Sandwich Cement Fast UNIVERSALFibre SHANK Ceramic (B&D) 2 PACK 5 PACK & MDF Part. Board Cut Cut (Steel) Ferrous Material TIMBER Glass /Glass Sheet Cut TYPE Timber PRODUCT31304PACKAGING 31373 30mm 30mm 30mm 30mm 30mm – – – – – HANG–SELL – – – 31380 31311 30mm 30mm 30mm 30mm 30mm – – – – – – – – – 31397 31328 60mm 60mm 60mm 60mm 60mm – – – – – – – – ✔ 31403 – 100mm 100mm 100mm – 100mm – – – – – – – – ✔ 31410 31335 60mm 60mm 60mm 60mm – – – – – – – – – ✔ 31427 – 60mm 60mm 60mm 60mm – – – – – – – – – ✔ PACK PACK PACK PACK 31434 31342 60mm 60mm – – 60mm – – – – – – – – ✔ $ PACK PART # $ PACK PART # 31441 – UNIVERSAL 30mm 30mm – – 30mm 30mm – – – – – – – – SHANK – TIMBER & SYNTHETICS 31458 – ≤ 30 ≤ 50mm 50mm – – 50mm 50mm – – – – – – – – 6.29 14.25 30 ≤ 30 ≤ 30 ≤ 30 – – ✔ – ✔ – – ALLOY 100 2.5 U101B 7110-31373 7110-31304 31465 – TIMBER 20mm 20mm 20mm – 20mm 20mm – – – – – – – – UP TO 30MM. IDEAL FOR PRECISE, STRAIGHT, CLEAN CUTS IN HARDWOOD, SOFTWOOD, PLYWOOD, CHIPBOARD, MDF AND SYNTHETICS. 31472 31359 – – – – – – 3mm 3mm 3mm – – – – – CUT– 31373 31496 – – –TIMBER PRECISE – – – 3mm 3mm 3mm – – – – – 31489 – – – – – – 3mm 3mm 3mm 3mm – – – – – 31502 31366≤ 30 ≤ 30 – ≤ 30 ≤ –30 ≤ 30 –– – ✔ –– ✔ – ✔– ALLOY – 100 6mm 6mm 6mm – – 15.24 – 7110-31311 – – 6.68 2.5 U101BR 7110-31380 31519 – TIMBER UP–TO 30MM.–IDEAL FOR PRECISE, – – CLEAN CUTS – IN HARDWOOD, – 3mm 3mmPLYWOOD, 3mmCHIPBOARD, 65mm – DOWN CUT. – – STRAIGHT, SOFTWOOD, MDF AND–SYNTHETICS. 31526 – – – – – 85mm 85mm 6mm 6mm 6mm 85mm – – – – TIMBER DOWN CUT 31380 31533 – – – – – 20mm – – 20mm 20mm – 20mm – 20mm ✔ BOSCH EQUIVALENT

PITCH

LENGTH MM

BLADE MATERIAL

FAST CUT CLEAN CUT ROUGH CUT STRAIGHT CUT CURVED CUT DOWN CUT

ACRYLIC MM

PVC MM

CHIPBOARD AND MDF MM LAMINATED PARTICLE BOARD MM

2 2 5 5

6.29 14.25 ≤ 60 ≤ 60 ≤ 60 ≤ 60 ≤ 60 – ✔ ✔ – ✔ – – ALLOY 100 4.0 U101D 7110-31397 TIMBER UP TO 60MM. IDEAL FOR FAST, STRAIGHT, CLEAN CUTS IN HARDWOOD, SOFTWOOD, CHIPBOARD, MDF AND SYNTHETICS.

TIMBER FAST CUT

7.94 – – ≤ 100 – ✔ ✔ – ✔ – – ALLOY 132 4.0 U301DL 7110-31403 TIMBER UP TO 100MM. IDEAL FOR FAST, STRAIGHT, CLEAN CUTS IN HARDWOOD, SOFTWOOD, CHIPBOARD, MDF AND SYNTHETICS.

≤ 100 ≤ 100 ≤ 100

100

TIMBER FAST CUT LONG

31403

31373

TIMBER PRECISE CUT

5.27 – – ✔ – – ✔ – – ALLOY 100 4.0 U144D TIMBER UP TO 60MM. HIGH SPEED, STRAIGHT CUTS IN HARDWOOD, SOFTWOOD, CHIPBOARD AND MDF.

4.21 ≤ 60 ≤ 60 – – ≤ 60 – ✔ – ✔ ✔ – – ALLOY 100 3.0 U111C TIMBER UP TO 60MM. FOR FAST, STRAIGHT, ROUGH CUTS IN HARDWOOD, SOFTWOOD AND PLASTIC.

31434

31373

TIMBER ROUGH CUT

11.70

7110-31335

–

7110-31434

9.04

7110-31342

2.5 MM

7110-31427

PLASTICS

TIMBER CURVED CUT

MDF

5.62 ≤ 60 ≤ 60 ≤ 60 ≤ 60 – – ✔ – – – ✔ – ALLOY 100 4.0 U244D TIMBER UP TO 60MM. HIGH SPEED, CURVED CUTS IN HARDWOOD, SOFTWOOD, CHIPBOARD AND MDF.

31427

7110-31410

–

TIMBER HIGH SPEED

LAMINATED CHIPBOARD

31410

≤ 60

CHIPBOARD

≤ 60

PLYWOOD

≤ 60

TIMBER

Ideal for precise, straight, clean cuts in hardwood, softwood, plywood, chipboard, MDF and synthetics

TIMBER UP TO 30MM

31397

≤ 60

7110-31328

SMOOTH CUT

PLYWOOD MM

SOLID TIMBER MM

T +61 3 9212 7000 F +61 3 9212 7070

NEW

CUTTING FEA Clean Rough Str Cut Cut ✔ – ✔ – ✔ – ✔ – – – – – – ✔ – – – – – – – – – – – – – – – – – – – –

TIMBER PRECISE CUT

3.93 – ≤ 30 ≤ 30 – – ≤ 30 ≤ 30 – – – ✔ – – ALLOY 75 2.0 U119B 7110-31441 – TIMBER & ACRYLIC UP TO 30MM. FOR STRAIGHT CUTS IN HARDWOOD, SOFTWOOD, PLYWOOD, INSULATION MATERIALS, PLASTIC AND ACRYLIC GLASS.

31441

TIMBER AND ACRYLIC

4.52 – ≤ 50 ≤ 50 – – ≤ 50 ≤ 50 – – – ✔ – – ALLOY 100 2.0 – 7110-31458 – TIMBER & ACRYLIC UP TO 50MM. FOR STRAIGHT CUTS IN HARDWOOD, SOFTWOOD, PLYWOOD, INSULATION MATERIALS, PLASTIC AND ACRYLIC GLASS.

31458

TIMBER AND ACRYLIC

4.32 – ≤ 20 ≤ 20 ≤ 20 – ≤ 20 ≤ 20 – – – – ✔ – ALLOY 75 2.0 T119BO 7110-31465 – TIMBER & ACRYLIC UP TO 20MM. FOR CURVED CUTS IN HARDWOOD, SOFTWOOD, PLYWOOD, INSULATION MATERIALS, PLASTIC AND ACRYLIC GLASS.

31465

PAGE 184

TIMBER AND ACRYLIC

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 184

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 26/04/12 5:02 PM

SAW BLADES JIG SAW UNIVERSAL SHANK

JIGSAW BLADE SELECTION CHART

UNIVERSAL

7110- PART # PREFIX TIMBER SYNTHETICS METALS CUTTING FEA GROUP JIGSMISCELLANEOUS Part # Part #SHANK Solid Plywood Chipboard Laminated PVC Acrylic Ferrous Non Alumin. Sandwich Cement Fast Clean Rough Str UNIVERSALFibre SHANK Ceramic (B&D) 2 PACK 5 PACK & MDF Part. Board Cut Cut (Steel) Ferrous Material METAL Glass /Glass Sheet Cut Cut Cut TYPE Timber PRODUCT 31373 31304PACKAGING 30mm 30mm 30mm 30mm 30mm – – – – – HANG–SELL – – – ✔ – 31380 31311 30mm 30mm 30mm 30mm 30mm – – – – – – – – – ✔ – 31397 31328 60mm 60mm 60mm 60mm 60mm – – – – – – – – ✔ ✔ – 31403 – 100mm 100mm 100mm – 100mm – – – – – – – – ✔ ✔ – 31410 31335 60mm 60mm 60mm 60mm – – – – – – – – – ✔ – – 31427 – 60mm 60mm 60mm 60mm – – – – – – – – – ✔ – – PACK PACK PACK PACK 31434 31342 60mm 60mm – – 60mm – – – – – – – – ✔ – ✔ $ PACK PART # $ PACK PART # 31441 – UNIVERSAL 30mm 30mm – – 30mm 30mm – – – – – – – – – – SHANK – METAL, SYNTHETICS & MISCELLANEOUS 31458 – 50mm 50mm – – 50mm 50mm – – – – – – – – – – 6.08 13.89 3 3 3 – – – – – – ✔ – – HSS 75 1.2 U118A 7110-31472 7110-31359 31465 – THIN METALS 20mm1.5 TO 20mm 20mm – 20mm 20mm – – – – – – – – – – 3.0MM. STRAIGHT CUTS IN THIN METALS. FERROUS, NON-FERROUS, SHEET METAL AND ALUMINIUM. 31472 31359 – – – – – – 3mm 3mm 3mm – – – – – – – 31472 31496 – – – METAL THIN – – – – 3mm 3mm 3mm – – – – – – – 31489 – – – – – – 3mm 3mm 3mm 3mm – – – – – – – 31502 31366 3 –– – – –– – ✔ –– HSS – 75 6mm 6mm 6mm – – – – – – – 7.06 3 – 3 –– – 1.2 U218A 7110-31496 –– 31519 – THIN METALS – 1.5 TO –3.0MM. CURVED – CUTS IN THIN – METALS.– FERROUS, – NON-FERROUS, 3mm 3mm METAL 3mm 65mm – – – – – – SHEET AND ALUMINIUM. 31526 – – – – – 85mm 85mm 6mm 6mm 6mm 85mm – – – – – – 31533 – –31496 – METAL THIN – CURVED– 20mm – – 20mm 20mm – 20mm – 20mm ✔ – – BOSCH EQUIVALENT

PITCH

LENGTH MM

BLADE MATERIAL

FAST CUT CLEAN CUT ROUGH CUT STRAIGHT CUT CURVED CUT DOWN CUT

ACRYLIC MM

PVC MM

SANDWICH MATERIAL MM

ALUMINIUM MM

NON-FERROUS MM

FERROUS (STEEL) MM

T +61 3 9212 7000 F +61 3 9212 7070

NEW

2 2 5 5

6.08 – 3 3 3 – – 3 – – – ✔ – – BiM 75 1.2 U118AF 7110-31489 – THIN METALS 1.5 TO 3.0MM. STRAIGHT CUTS. BI-METAL FLEXIBLE & SHATTERPROOF BLADE. FERROUS, NON-FERROUS, STAINLESS, ALUMINIUM & ACRYLIC.

METAL THIN

6.08 13.89 6 6 6 – – – – – – ✔ – – HSS 75 2.0 U118B 7110-31502 METALS 3.0 TO 6.0MM. STRAIGHT CUTS IN MEDIUM-THICK METALS. FERROUS, NON-FERROUS, SHEET METAL AND ALUMINIUM.

100

31502

METAL MEDIUM

7110-31366

TIMBER PRECISE CUT

31373

9.23 – 3 3 3 65 – – – – – ✔ – – HSS 132 1.2 U318A 7110-31519 – METALS 1.5–3.0MM, SANDWICH 1.5–65.0MM. STRAIGHT CUTS IN METALS & SANDWICH MATERIALS. FERROUS, NON-FERROUS, SHEET METAL & ALUMINIUM.

31519

METAL & SANDWICH

–

7.16 – – 20 20 – 20 – ✔ – – ✔ – – HSS 100 3.0 U127D 7110-31533 – ALUMINIUM 2.0–20.0MM. FAST, STRAIGHT CUTS IN ALUM., NON-FERROUS METALS, FIBREGLASS REINFORCED SYNTHETICS, FIBRE CEMENT SHEET & PLASTIC.

31533

31373

METAL ALUMINIUM

TIMBER PRECISE CUT

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 185

WWW.BORDO.COM.AU

2.5 MM

31526

MDF

10.62 6 6 6 85 85 85 – – – ✔ – – BiM 132 2.0 U318BF 7110-31526 METALS 2.0–6.0MM, SANDWICH 2.0–85.0MM. SAME AS 7110-31519 ABOVE WITH BI-METAL FLEXIBLE & SHATTERPROOF BLADE.

SMOOTH CUT

PLASTICS

LAMINATED CHIPBOARD

CHIPBOARD

PLYWOOD

METAL & SANDWICH

TIMBER

Ideal for precise, straight, clean cuts in hardwood, softwood, plywood, chipboard, MDF and synthetics

TIMBER UP TO 30MM

31489

PERFECT FOR FIBRE CEMENT SHEET

PAGE 185 26/04/12 5:02 PM

JIG SAW ASSORTMENT

NEW PRODUCT

GROUP PACKAGING

JIGS HANG SELL

$ ASSORTMENT 14.03

PART NUMBER 7110-37054

JIGSAW BLADE SELECTION CHART ASSORTMENT

T-SHANK – 5 BLADES

SINGLE L

7110- PART T-SHANK # PREFIX (EURO SHANK) TIMBER SYNTHETICS METALS MISCELLANE – ASSORTMENT PACK TIMBER UP TO 30MM. IDEAL FOR PRECISE, STRAIGHT, CLEAN CUTS IN HARDWOOD, SOFTWOOD, PLYWOOD, CHIPBOARD, MDF AND SYNTHETICS. Part # Part # Solid Plywood Chipboard Laminated PVC Acrylic Ferrous Non Alumin. Sandwich Fibre Ceramic TIMBER PRECISE CUT Cut (Steel) Ferrous Material Glass /Glass 2 PACK 5 PACK31113Timber & MDF Part. Board Cut 31113

30970 30mm 30mm 30mm 30mm SOFTWOOD 30mmAND PLASTIC. – TIMBER UP TO 60MM. FOR FAST, STRAIGHT, ROUGH CUTS IN HARDWOOD,

31120

30987

31137

–

30994 60mm 60mm 60mm 60mm 60mm – – – AND ACRYLIC – GLASS. – TIMBER & ACRYLIC UP TO 20MM. FOR CURVED CUTS IN HARDWOOD, SOFTWOOD, PLYWOOD, INSULATION MATERIALS, PLASTIC

–

TIMBER30mm ROUGH CUT30mm 3118230mm

TIMBER AND ACRYLIC

31212100mm

100mm

–

31151

THIN METALS 1.560mm TO 3.0MM. STRAIGHT THIN METALS. FERROUS, 31014 60mm CUTS IN60mm 60mm NON-FERROUS, – SHEET– METAL AND–ALUMINIUM. –

–

31175

31021

–

31182

ALUMINIUM 2.0–20.0MM. STRAIGHT CUTS IN ALUM., FIBREGLASS REINFORCED SYNTHETICS, FIBRE–CEMENT SHEET 31038 60mmFAST, 60mm – NON-FERROUS – METALS,60mm – – – & PLASTIC. –

–

31199

–

31205

60mm

METAL ALUMINIUM

31281

100mm

–

THIN 60mmMETAL60mm

–

30mm

31007

31236

100mm

30mm

31144

60mm

–

– –

–

30mm

–

30mm 30mm

–

50mm

–

50mm 50mm

–

31212

–

20mm

–

20mm 20mm

–

31229

–

JIGSAW SELECTION CHART 31045 BLADE – – – – ASSORTMENT

31236

$ ASSORTMENT – 14.03

PART NUMBER –7110-37061

1.2mm 1.2mm 1.2mm 3mm

3mm

–

UNIVERSA – –

– TIMBER – – – – –METALS3mm 3mm MISCELLANEOUS 3mm – – – F PART # 31069 PREFIX SYNTHETICS CUTTING UNIVERSAL SHANK (B&D Laminated SHANK) PVC – ASSORTMENT Part # Solid Plywood Chipboard Acrylic Ferrous PACK Non Alumin. Sandwich Fibre Ceramic Cement Fast Clean Rough – IDEAL FOR PRECISE, –SOFTWOOD, 3mm 3mm 3mm 3mm – 5 31052 PACK &– MDF STRAIGHT, Part.–Board Cut – Cut (Steel) Ferrous Material Glass /Glass Sheet Cut – Cut –Cut TIMBER UPTimber TO 30MM. CLEAN CUTS IN HARDWOOD, PLYWOOD, CHIPBOARD, MDF AND SYNTHETICS. 31304 30mm 30mm 30mm 30mm 30mm – – – – – – – – – ✔ – TIMBER PRECISE CUT – 31076 31373 –– –– –– 31311 30mm –30mm – 30mm 30mm 30mm– – –– –6mm – 6mm – 6mm– – – ✔ 31328 60mm 60mm 60mm 60mm 60mm – – – – – – – – ✔ ✔ – TIMBER UP TO 60MM. FOR FAST, STRAIGHT, ROUGH–CUTS IN HARDWOOD, – –– AND PLASTIC. 65mm –– – 31083 100mm –100mm 100mm – 100mm– –SOFTWOOD –– –3mm – 3mm – 3mm– – ✔ – ✔ TIMBER ROUGH 31434 31335 60mm 60mm 60mm CUT 60mm – – – – – – – – – ✔ – – – 85mm 85mm –– – 31090 60mm –60mm – 60mm 60mm – – – 85mm – – –6mm – 6mm – 6mm– – ✔ – – 31342 60mm UP60mm 60mm SOFTWOOD, –PLYWOOD, –INSULATION– MATERIALS,– PLASTIC –AND ACRYLIC ✔ TIMBER & ACRYLIC 31106 – TO 20MM.–FOR–– CURVED CUTS ––– IN HARDWOOD, – – 20mm – – 20mm – 20mm–– GLASS. ––– 20mm–– –✔– – 30mm 30mm 30mm 30mm – – – – – TIMBER AND ACRYLIC 31465 – 50mm 50mm – 50mm 50mm – – – – – – – –20mm ––– – ––– – – – –– – –– ––– 15mm–– 15mm – 20mm 20mm 20mm 20mm – – – – – THIN METALS 1.5 AND ALUMINIUM. 31359 – TO 3.0MM. – STRAIGHT – CUTS IN THIN – METALS. –FERROUS,–NON-FERROUS, 3mm SHEET 3mmMETAL3mm – – – – – – – – – – – – – – 3mm 3mm 3mm – – – – – – – 31472 METAL THIN – – – – – – 3mm 3mm 3mm 3mm – – – – – – – 31366 – – – – – – 6mm 6mm 6mm – – – – – – – METALS, FIBREGLASS REINFORCED SYNTHETICS, FIBRE CEMENT – ALUMINIUM 2.0–20.0MM. – –FAST, STRAIGHT – CUTS IN ALUM., – NON-FERROUS – – 3mm 3mm 3mm 65mm – SHEET &– PLASTIC. – – – – – – – – – 85mm 85mm 6mm 6mm 6mm 85mm – – – – – – METAL ALUMINIUM 31533 – – – – – 20mm – – 20mm 20mm – 20mm – 20mm ✔ – –

18193_Bordo_BuyersGuide_082011_PJ32.indd 186

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071

BORDO INDUSTRIAL TOOLS

100

PAGE 186

Part # 31243 2 PACK 31373 31250 31380 31397 31267 31403 31410 31274 31427 31434 31281 31441 31458 31298 31465 31472 31496 31489 31502 31519 31526 31533

4-30 MM

– 7110-

UNIVERSAL SHANK – 5 BLADES

n rd,

9212 7070

3 Kingston Park Court Scoresby Victoria 3179 Australia T +61 3 9212 7000 F +61 3 T +61 3 9212 7000 F +61 3 9212 7070

SAW BLADES

26/04/12 5:02 PM

SAW BLADES JIG SAW MERCHANDISERS

GROUP PACKAGING

JIGS MERCHANDISER

NEW PRODUCT

7110- PART # PREFIX

TIMBER

SYNTHETICS

METALS

MISCELLANEOUS

CUTTING FEATURES

120

30987

137

30994

144

31007

100mm 100mm31144 100mm

151

31014

60mm 60mm 31151 60mm 31014 60mm MERCHANDISER CONTENTS

175

31021

60mm

60mm 31175 60mm

31021 60mm

100mm 100mm 100mm – –100mm –– – 31458 – – – – 100mm 50mm –50mm– 31465 – PART 20mm 20mm PACK 20mm 60mm – 60mm – PACK–60mm 60mm– –– – 31472 – 31359 –– – – – QTY 31496 NUMBER – QTY – – – 60mm – 60mm – –60mm – –60mm – –– – 31489 –– – – – WOOD BLADES

182

31038

60mm

60mm 31182 –

31038 –

60mm 60mm

199

–

30mm

30mm 31199 –

–

205

–

50mm

50mm 31205 –

–

50mm 50mm

212

–

20mm

20mm 31212 20mm

–

20mm 20mm

229

–

– 31229 –

–

––

236

31045

– 31236 –

31045 –

––

– –

–

31069 –

––

– 31243 –

31052 –

––

100 75

4-30 MM

30970

––

MDF

PLASTICS

30970

CHIPBOARD

30970 30970

18193_Bordo_BuyersGuide_082011_PJ32.indd 187

TIMBER PRECISE TIMBER CUT PRECISE CUT 30970 TIMBER PRECISE TIMBER CUT PRECISE CUT 30970

bordo.com.au

–

– – – – – – – – – –

–

✔–

✔ ✔– – ✔– – ✔✔ ✔ ✔– ✔ ✔–

– –– ✔ –– ✔ –– – –– – ––

✔

–

✔– –

✔–

–

–– –

✔– –

–

✔

–

✔

–

✔

–

✔

–

✔

–

✔

–

✔

–

SALES@BORDO.COM.AU TIMBER PRECISE TIMBER CUT PRECISEWWW.BORDO.COM.AU CUT 30970

– –

4-30 MM

– –

TIMBER PRECISE CUT

TIMBER PRECISE TIMBER CUT PRECISE CUT 30970

– – – – – – – – – – –✔ – ✔ –

2.5 MM

100

7110-31397 (2 PACK) –✔ –– (2 –PACK) – 7110-31403 7110-31410 (2 PACK) –– –✔ –– 7110-31427 (2 PACK) –✔ –– –– 7110-31434 (2 PACK) –✔ –– (2 –PACK) – 7110-31441 –7110-31458 – –✔ (2 –PACK) – 7110-31465 (2 PACK) –✔ –– –– METAL BLADES –3– –✔ –– (2 –PACK) – 7110-31472 7110-31489 –3– –✔ –– (2 –PACK) – 3 7110-31496 (2 PACK) –– –✔ –– –– 3 7110-31502 (2 PACK) 20mm – – ✔ 20mm – ✔ – 3 7110-31519 (2 PACK) 3– 15mm 7110-31526 15mm ✔ 15mm – (2 –PACK) – 3 7110-31533 (2 PACK) – –

TIMBER PRECISE CUT

31373

–

✔

–

✔

–

– –

–

✔

–

BLADES SUIT

–

3 –3– –3– 3 –– 3 –3– –3– 3 ––

–

––– – –✔ – – – PART –✔ – ––– – –✔ NUMBER – – – – – – BLADES –✔ – – –✔ WOOD

SMOOTH CUT

–

– –✔ – –– – –– – – – – 7110-31373 PACK) –✔ ––– (2–✔ – 65mm –– 85mm – 7110-31380 (2–PACK) – –✔ – –– – 20mm ––– 20mm –

–✔ –

PREMIUM QUALITY ALLOY BLADES

– 31298 –

–

– – – –– – –PACK– 3mm – –3mm QTY 3mm 3mm 3mm – –3mm 6mm 6mm 3mm –3✔3mm 6mm 3 6mm 20mm– –20mm

BLADES SUIT LU : B&D : DeWalt : Festo : GMC : Hitachi : Makita : Metabo

–

✔

PLASTICS

20mm –

30mm 30mm – – –50mm✔ –– 50mm – 20mm 20mm – – – – –PART – – – ✔ 3mm – NUMBER – – – 3mm – – – BLADES – –– –3mm✔ 3mm WOOD – – – 6mm PACK) –7110-31113 – – – –– – (2 – ✔ 3mm – 85mm 85mm 6mm 7110-31120 (2 PACK) – – – 20mm – – – – ––

MDF

85mm –

31106 –

–

–– –

LAMINATED CHIPBOARD

31090 –

– 31281 –

–

CHIPBOARD

– 31274 –

–

30mm

PLYWOOD

–

TIMBER

–– ––

31366

30mm

31076 – 31083 –

TIMBER UP TO 30MM

– 31250 – – 31267 –

31502

–

Ideal for precise, straight, clean cuts in hardwood, softwood, plywood, chipboard, MDF and synthetics

–

31441

2 – 31519 PACK) 60mm – – 7110-30970 – – – – (560mm – – – –3– – – – – – – 2 315267110-30987 (5 PACK) 3– 30mm 30mm – 31533 – – – – – 30mm – 30mm –– – – – – 2 7110-30994 (5 PACK) 3 7110-31137 (2 PACK) 50mm 50mm 2 – – 7110-31007 – – – (550mm – 50mm – – – – – – – – PACK) 3 7110-31144 (2 PACK) – 2 7110-31014 (5 PACK) 3 20mm 20mm –20mm – – – 20mm– 20mm – – –7110-31151 – – – (2 –PACK)– – 2 7110-31021 (5 PACK) 3 7110-31175 (2 PACK) – – 1.2mm– 1.2mm –1.2mm – – – –1.2mm – 1.2mm –1.2mm – – – 2 7110-31038 (5 PACK) 3 7110-31182 (2 PACK) – – 3mm –METAL 3mm BLADES – 3mm – – – –33mm –7110-31199 3mm – 3mm(2 –PACK)– – – – 23mm – 7110-31045 3mm – 3mm(5 PACK) – – – –33mm –7110-31205 3mm – 3mm(2 –PACK)– – 2 7110-31052 (5 PACK) 3 7110-31212 (2 PACK) 3mm– 3mm – 3mm – 3mm – – 3mm – 3mm – 3mm – 3mm – – – METAL BLADES 2 7110-31069 (5 PACK) – – 26mm – 7110-31076 6mm – 6mm(5 PACK) – – – –36mm –7110-31229 6mm – 6mm(2 –PACK)– – – – 23mm – 7110-31083 3mm – 3mm(5 PACK) –65mm – –33mm –7110-31236 3mm – 3mm(2 –PACK) 65mm– 2 7110-31090 (5 PACK) 3 7110-31243 (2 PACK) 85mm – 6mm – 6mm – 6mm 85mm 85mm 85mm – 6mm – 6mm – 6mm – 85mm– 2 7110-31106 (5 PACK) 3 7110-31250 (2 PACK) –– – ASSORTMENT – 20mm –20mm 20mm – – 20mm 20mm20mm 20mm(2 ✔ PACK 3 – –7110-31267 PACK)– – 3 – 15mm 7110-31274 –– 2 – – – 7110-31106 – – – – – 15mm – 15mm– (2 –PACK)– – TUNGSTEN CARBIDE GRIT EDGE 3 7110-31281 (2 PACK) 2 7110-31289 (2 PACK) – –

JIGSAW BLADES

Part No. 7110-31373

30mm 30mm

–

OOD

ER UP TO 30MM – PRECISE CUT

–

31373

–

31007 –

2.5 MM

Part No. 7110-30970 31106

4-30 MM

298

31090

PLASTICS

281

MDF

274

31076

31083

JIGSAW BLADES 100

267

31052

CHIPBOARD

250

31069

OOD

243

–

BOSCH EQUIVALENT U101B

30970

Bordo International Pty Ltd ABN 96 005 125 833 3 Kingston Park Court Scoresby Victoria 3179 Australia T +61 3 9212 7000 F +61 3 9212 7070

113

TIMBER 7110- PART # PREFIX SYNTHETICS TIMBERPart # METALS SYNTHETICS MISCELLANEOUS METALS CUTTING MISCELLANEOUS FEATURES FEATURES Part # Solid Plywood Chipboard Laminated PVC Acrylic Ferrous Non Alumin. Sandwich Fibre Ceramic Cement CUTTING Fast Clean Rough Straight Curved PART $ Part. Board PART $ Straight Cut CutFast (Steel) Ferrous MaterialCement Glass PART /Glass Cut Curved Cut Cut 2$PACK Non 5 PACK Timber & Ferrous MDF Ceramic Solid PlywoodPart Chipboard #TYPE Laminated Part # Solid PlywoodFerrous Chipboard PVC Acrylic Laminated Alumin. PVC Sandwich AcrylicFibre NonCement Alumin. Sandwich Clean Fibre RoughCeramic Curved Down Fast Sheet Clean Cut RoughCutStraight Dow MERCHANDISER MERCHANDISER NUMBER MERCHANDISER NUMBER MERCHANDISER NUMBER 31304 30mm 30mm 30mm 30mm – CutMaterial – Cut –Glass – –Cut – – Cut ✔ Cut– ✔ Board Timber Cut Cut (Steel) Part. Board 30mm Cut Material Cut Glass (Steel)/Glass FerrousSheet Cut – /Glass Cut– Sheet Cut Cut Cut Cut –Cut Timber 2 PACK & MDF Part. 5 PACK &31373 MDFFerrous 31380 31311 30mm 30mm 30mm 30mm 30mm – – – – – – – – – ✔ – ✔ – 491.53 D1 T-SHANK MERCHANDISER –––– 30mm 30mm 31113 30mm 30970 30mm– 5 PACKS 30mm 30mm 30mm – –30mm 30mm–7110-D1 30mm–60mm– 60mm – – – 60mm – – 60mm – – – –– –– ✔ – – – – – –✔ – ––– 31397 – 31328 60mm –✔ ✔ – ✔ ✔– ✔– –– 31403 – 100mm 100mm 100mm 100mm 7110-D2 – – – –– – – – ✔ ✔ – ✔ – – 322.20 – D2 T-SHANK MERCHANDISER – 2 PACKS – – 30mm 30mm 31120 30mm 30987 30mm 30mm 30mm 30mm – –30mm 30mm– 60mm 30mm–60mm– 60mm – – 60mm – – –– – – – –– ✔ – – – – –✔ – ––– ✔ ✔– 31410 – 31335 –– –✔ ✔ – – ✔– –✔ – – 322.20 D3 UNI. SHANK MERCHANDISER – 2 PACKS – – 7110-D3 31427 – 60mm 60mm 60mm 60mm – – – – – – – – – ✔ – – – ✔ 60mm 60mm 31137 60mm 30994 60mm 60mm 60mm 60mm – –60mm 60mm– 60mm 60mm–60mm– – – – – – – 60mm – – – ✔ –– ✔ – – – – –✔ – ––– – ✔✔ 31434 – 31342 –✔ –✔ ✔ – – ✔– ––

precise, straight, clean cuts in hardwood, softwood, plywood, chipboard, MDF and synthetics.

10- PART # PREFIX rt # Part # PACK 5 PACK

Bordo International Pty Ltd ABN 96 005 125 833 3 Kingston Park Court Scoresby Victoria 3179 Australia T +61 3 9212 7000 F +61 3 9212 7070

JIGSAW CHART BLADESINGLE SELECTION CHART UNIVERSAL SHAN JIGSAW BLADE SELECTION JIGSAW BLADE CHARTSELECTION LUG EURO SHANK SINGLE(TLUG SHANK) EURO SHANK (T SHANK

PAGE 187 21/04/12 6:38 PM

SCREWDRIVER BITS BORDO PLUS HANG SELL

BORDO SCREWDRIVER INSERT BITS, POWER BITS, NUTSETTERS, ADAPTORS, BIT HOLDERS AND QUICK CHANGE EXTENSIONS BORDO'S RANGE OF SCREWDRIVER BITS INCLUDES AN EXTENSIVE RANGE OF INSERT BITS, POWERBITS, NUTSETTERS, MAGNETIC BIT HOLDERS, QUICK CHANGE BIT HOLDERS AND QUICK CHANGE EXTENSIONS. The screwdriver bit program is made up of three distinct ranges: BORDO PLUS – For challenging applications Bordo has developed the "Plus" range when extreme bit performance is paramount. These insert bits feature multi-stage hardening and tempering to create a dynamic torsion zone which dissipates damaging peak torque. DiaTiN and ISOTiN bits also include high performance surface coatings to increase surface hardness and increase wear resistance. The Plus range also includes a range of premium bit holders which have been designed to provide outstanding functionality. BORDO IMPACT – Today's modern impact drivers place a unique set of demands on screwdriver bits. Bordo's Impact bits have been specifically engineered to provide industry leading performance in all impact driver applications. BORDO STANDARD – Bordo's standard range of screwdriver bits includes an extensive range of insert bits, powerbits, nutsetters, magnetic bit holders, quick change bit holders and quick change extensions. Insert bits and powerbits are available in a large range of tip styles and lengths to suit all common applications and most security fasteners. All bit tips are precision formed to guarantee optimum engagement ensuring maximum tool life and minimising damage to screw heads. Each bit is manufactured using high grade alloy material and heat tempered for high durability in all general purpose applications.

BORDO PLUS DIATiN HI-TORQUE DYNAMIC TORSION BITS Bordo's DIATiN range of insert bits are ideal for challenging applications where extreme bit performance is paramount. These bits are multi-stage hardened and tempered to create a "dynamic torsion zone" to dissipate damaging peak torque loads and feature a Titanium Nitride coating. The TiN (Titanium Nitride) coating significantly increases surface hardness and wear resistance resulting in longer tool life and optimum corrosion protection. In addition to the TiN coating these bits feature Tip styles to suit Phillips® #2 a Tungsten Diamond Carbon coating on the "engagement zone" of the bit. This and Pozidriv® #2 special coating ensures a very high level of grip between the bit and screw which significantly reduces cam-out. This extra grip reduces the axial load required, reducing operator fatigue and potential damage to screw head guideways. Tungsten Diamond Carbon These insert bits offer significant advantages over standard bits especially coating engagement zone when fastening solid metal and sheet metal. When the underside of a screw head comes into contact with the flat non-elastic surface of metal the insert bit TiN coated experiences a sharp peak in torque load. The torsion bit is designed to dissipate this peak torque avoiding permanent Retaining ring notches distortion or deformation of the bit point. Additionally this also significantly reduces the chance of the bit slipping out of the screw head reducing wear and potential damage to the work piece. These advantages also apply when 1/4" hex fastening into layers of materials with differing degrees of hardness, where alternating loads apply additional stresses to insert bits.

NEW PRODUCT

GROUP

SCHT SIZE

OAL MM

PACK QTY

PACK TYPE

$ EACH

PART NUMBER

PHILLIPS®

BOX

8.21

5303-PH2X25

POZIDRIV®

BOX

8.21

5303-PZ2X25

TYPE – BORDO PLUS DIATiN

PAGE 188

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 188

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:39 PM

SCREWDRIVER BITS BORDO PLUS HANG SELL

BORDO PLUS ISOTiN HI-TORQUE DYNAMIC TORSION BITS Bordo’s ISOTiN range of insert bits are manufactured to suit the demanding applications of professional screw fastening. These bits are multi-stage hardened and tempered to create a “dynamic torsion zone” to dissipate damaging peak torque loads and feature a double coating of Titanium Nitride. The TiN (Titanium Nitride) coating significantly increases surface hardness and wear resistance resulting in longer tool life and optimum corrosion protection. These insert bits offer significant advantages over standard bits especially when fastening solid metal and sheet metal. When the underside of a screw head comes into contact with the flat non-elastic surface of metal the insert bit experiences a sharp peak in torque load.

Tip styles to suit Phillips and Pozidriv

NEW PRODUCT

Double thickness Titanium Nitride (TiN) coating

Retaining ring notches

The torsion bit is designed to dissipate this peak torque avoiding permanent distortion or deformation of the bit point. Additionally this also significantly reduces the chance of the bit slipping out of the screw head reducing wear and potential damage to the work piece. These advantages also apply when fastening into layers of materials with differing degrees of hardness, where alternating loads apply additional stresses to insert bits.

1/4" hex

GROUP

SCHT SIZE

OAL MM

PACK QTY

PACK TYPE

$ EACH

PART NUMBER

PHILLIPS® PHILLIPS® PHILLIPS®

#1 #2 #3

25 25 25

5 5 5

BOX BOX BOX

4.17 4.17 4.17

5302-PH1X25 5302-PH2X25 5302-PH3X25

POZIDRIV® POZIDRIV®

#1 #2

25 25

5 5

BOX BOX

4.17 4.17

5302-PZ1X25 5302-PZ2X25

TYPE – BORDO PLUS ISOTiN

BORDO PLUS HI-TORQUE DYNAMIC TORSION BITS This range of bits has been specifically developed to meet the demands of industrial and professional screw fastening. Hi-Torque Dynamic Torsion bits are cold forged from premium quality high-alloy steels and are manufactured to tolerances far exceeding the required DIN standard. All Bordo Plus Hi-Torque Torsion bits are multi-stage hardened and tempered to create a “dynamic torsion zone” to dissipate damaging peak torque loads. These insert bits offer significant advantages over standard bits especially when fastening solid metal and sheet metal. When the underside of a screw head comes into contact with the flat nonelastic surface of metal the insert bit experiences a sharp peak in torque load.

Tip styles to Phillips and Pozidriv screws

The torsion bit is designed to dissipate this peak torque avoiding permanent distortion or deformation of the bit point. Additionally this also significantly reduces the chance of the bit slipping out of the screw head reducing wear and potential damage to the workpiece. These advantages also apply when fastening into layers of materials with differing degrees of hardness, where alternating loads apply additional stresses to insert bits.

Retaining ring notches 1/4" hex

GROUP

SCHT SIZE

OAL MM

PACK QTY

PACK TYPE

$ EACH

PART NUMBER

PHILLIPS® PHILLIPS® PHILLIPS®

#1 #2 #3

25 25 25

5 5 5

BOX BOX BOX

1.69 1.69 1.69

5301-PH1X25 5301-PH2X25 5301-PH3X25

POZIDRIV® POZIDRIV® POZIDRIV®

#1 #2 #3

25 25 25

5 5 5

BOX BOX BOX

1.69 1.69 1.69

5301-PZ1X25 5301-PZ2X25 5301-PZ3X25

TYPE – BORDO PLUS HI-TORQUE

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 189

NEW PRODUCT

Tough alloy material with high Rockwell hardness

WWW.BORDO.COM.AU

PAGE 189 21/04/12 6:39 PM

SCREWDRIVER BITS BORDO IMPACT BULK

BORDO IMPACT BITS

NEW PRODUCT

Bordo’s range of Impact Bits are designed and manufactured for optimum performance in modern impact drivers. Not only do they offer significantly increased bit life in impact applications but they also offer exceptional performance in standard driving usage. The impact driver action places high peak torque demands on both insert and power bits. Our range features a uniquely engineered torsion zone with multi-stage hardening and tempering to dissipate damaging peak loads. Many manufacturers spruke the benefits of their “high torque”, “torsion” and “impact” bits. The vast majority do not live up to the hype. Bordo’s range of impact bits significantly outperform those of our competitors.

Tip styles to suit common applications

Uniquely engineered torsion zone Retaining ring notches 1/4" hex

Uniquely engineered torsion zone with multi-stage hardening and tempering to dissipate damaging peak loads

PH2 x 25MM CYCLES BEFORE FAILURE average impact 10.3 Nm at 100% loading

BORDO IMPACT

10236

2880 4603 3621 386 0

1000

2000

3000

4000

5000

6000

7000

8000

9000

10000

11000

PH2 x 50MM CYCLES BEFORE FAILURE average impact 10.3 Nm at 100% loading

BORDO IMPACT

10035

1955 5638 1807 1376 0

PAGE 190

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 190

1000

2000

3000

4000

5000

6000

7000

8000

9000

10000

11000

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:39 PM

SCREWDRIVER BITS BORDO IMPACT BULK

GROUP

SCIM TYPE – IMPACT PHILLIPS® PHILLIPS® PHILLIPS® PHILLIPS® POZIDRIV® POZIDRIV® HEX HEX SQUARE RECESS SQUARE RECESS SQUARE RECESS NUTSETTER NUTSETTER NUTSETTER NUTSETTER Phillips® Grippa® Slotted Hex PoziDriv® Square Recess Torx®

SIZE

OAL MM

PACK QTY

PACK TYPE

$ EACH

#2 #2 #2 #2 #2 #2 5MM 5MM #2 #2 #2 1/4" 3/8" 5/16" 5/16"

25 50 100 150 25 50 25 50 25 50 100 65 65 65 150

10 10 10 10 10 10 10 10 10 10 10 5 5 5 5

SLEEVE SLEEVE SLEEVE SLEEVE SLEEVE SLEEVE SLEEVE SLEEVE SLEEVE SLEEVE SLEEVE SLEEVE SLEEVE SLEEVE SLEEVE

1.18 2.11 4.84 5.92 1.18 2.11 1.55 2.78 1.18 1.96 4.84 9.01 9.79 9.17 16.48

PART NUMBER 5305-PH2X25 5405-PH2X50 5405-PH2X100 5405-PH2X150 5305-PZ2X25 5405-PZ2X50 5305-HX5X25 5405-HX5X50 5305-SR2X25 5405-SR2X50 5405-SR2X100 5605-NS1/4X65 5605-NS3/8X65 5605-NS5/16X65 5605-NS5/16X150

NEW PRODUCT

Most common screw drive system that absorbs torque peaks and lowers slippage. Ribbing on the Grippa grips in the recess of the screw greatly reducing cam-out. Oldest and still very popular screw type. Reduces cam-out and less operator pressure is needed. Self-centering for fast, efficient assembly operations. Growing in popularity in fasteners such as batten and decking screws. For fast, efficient installation and removal of fasteners. Cam-out is virtually eliminated due to the vertical sidewalls and reduced recess fallaway, and torque transfer is improved by the large cross-sectional areas of the six lobes.

GROUP

SCIM TYPE – IMPACT PHILLIPS® PHILLIPS® NUTSETTER

SIZE

OAL MM

BITS PER PACK

PACK TYPE

ORDER QTY

$ PER PACK

PART NUMBER

#2 #2 5/16"

25 50 65

25 25 5

BOX BOX BOX

5 PACKS 5 PACKS 5 PACKS

35.95 51.29 45.06

5305-PH2X25TP 5405-PH2X50TP 5605-NS5/16X65TP

NEW PRODUCT

BONUS

5350-MH1/4x50 bit holder in every insert bit trade pack

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 191

WWW.BORDO.COM.AU

PAGE 191 21/04/12 6:39 PM

SCREWDRIVER BITS BORDO STD

BORDO STANDARD SERIES SCREWDRIVER BITS, NUTSETTERS, BIT HOLDERS AND QUICK CHANGE EXTENSIONS

Tip styles to suit all common applications

Bordo’s standard range of screwdriver bits includes an extensive range of Tough alloy material insert bits, powerbits, nutsetters, magnetic bit holders, quick change bit with high Rockwell holders and quick change extensions. Insert bits and powerbits are available hardness in a large range of tip styles and lengths to suit all common applications and most security fasteners. All bits are packaged in individual sleeves, in strips of 5 or 10 pieces, which are marked with the part number and barcode. All bit Retaining ring tips are precision formed to ensure optimum engagement ensuring maximum notches tool life and minimising damage to screw heads. Each bit is manufactured using high grade alloy material and heat tempered for high durability in all 1/4" hex general purpose applications. Bordo’s standard range provides professional quality bits that are suitable for use in all common fastening applications. For challenging applications Bordo has developed the “Plus” range – when extreme bit performance is paramount. These insert bits feature multi-stage hardening and tempering to create a dynamic torsion zone which dissipates damaging peak torque. DiaTiN and ISOTiN bits also include high performance surface coatings to increase surface hardness and increase wear resistance – see pages 186 - 187. Today’s modern impact drivers place a unique set of demands on screwdriver bits. Bordo’s Impact bits have been specifically engineered to provide industry leading performance in impact applications – see page 188.

PAGE 192

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 192

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:39 PM

SCREWDRIVER BITS BORDO STD INSERT

GROUP

SCRW

PHILLIPS® PHILLIPS® PHILLIPS® PHILLIPS® PHILLIPS® 5/16" HEX

#0 #1 #2 #3 #4

OAL MM 25 25 25 25 30

GRIPPA® GRIPPA® GRIPPA®

1 2 3

25 25 25

10 10 10

SLEEVE SLEEVE SLEEVE

0.88 0.88 0.88

5300-PH1GX25 5300-PH2GX25 5300-PH3GX25

POZIDRIV® POZIDRIV® POZIDRIV®

#1 #2 #3

25 25 25

10 10 10

SLEEVE SLEEVE SLEEVE

0.88 0.88 0.88

5300-PZ1X25 5300-PZ2X25 5300-PZ3X25

2MM 3MM 4MM 5MM

25 25 25 25

10 10 10 10

SLEEVE SLEEVE SLEEVE SLEEVE

1.15 1.15 1.15 1.15

5300-HX2X25 5300-HX3X25 5300-HX4X25 5300-HX5X25

SQUARE RECESS SQUARE RECESS SQUARE RECESS

#1 #2 #3

25 25 25

10 10 10

SLEEVE SLEEVE SLEEVE

0.88 0.88 0.88

5300-SR1X25 5300-SR2X25 5300-SR3X25

SLOTTED SLOTTED SLOTTED

#4 #5 #6

25 25 25

10 10 10

SLEEVE SLEEVE SLEEVE

0.88 0.88 0.88

5300-SL4X25 5300-SL5X25 5300-SL6X25

TORX® TORX® TORX® TORX® TORX® TORX® TORX® TORX® 5/16" HEX

T10 T15 T20 T25 T27 T30 T40 T45

25 25 25 25 25 25 25 30

10 10 10 10 10 10 10 10

SLEEVE SLEEVE SLEEVE SLEEVE SLEEVE SLEEVE SLEEVE SLEEVE

3.19 3.19 3.19 3.19 4.07 4.07 4.07 4.07

5300-TX10X25 5300-TX15X25 5300-TX20X25 5300-TX25X25 5300-TX27X25 5300-TX30X25 5300-TX40X25 5300-TX45X25

PHILLIPS® DRYWALL PLASTERBOARD PHILLIPS® REDUCED NOSE

SLEEVE

2.52

5300-PH2DWX25

SLEEVE

1.09

5300-PH2RNX25

TYPE – STANDARD

HEX HEX HEX HEX

SIZE

PACK QTY 10 10 10 10 10

PACK TYPE SLEEVE SLEEVE SLEEVE SLEEVE SLEEVE

$ EACH 0.88 0.88 0.88 0.88 2.32

PART NUMBER 5300-PH0X25 5300-PH1X25 5300-PH2X25 5300-PH3X25 5300-PH4X30

PHILLIPS #2 REDUCED NOSE Phillips® Reduced Nose insert bits are designed for use in screws with poorly formed or damaged screw heads.

Bordo's range of IMPACT powerbits are engineered for optimum performance in impact drivers - see page 190

See pages 200 for the complete range of Bordo Plus high performance magnetic bit holders.

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 193

PHILLIPS #2 DRYWALL / PLASTERBOARD BITS Phillip® Drywall/ Plasterboard bits convert any standard cordless (or corded) drill into a screwgun. These bits drive the screw to an ideal preset depth and evenly draw in the plasterboard paper without tearing.

WWW.BORDO.COM.AU

PAGE 193 21/04/12 6:39 PM

SCREWDRIVER BITS BORDO STD SECURITY

GROUP

SCRW

SIZE

OAL MM

PACK QTY

PACK TYPE

$ EACH

TORX® TR TORX® TR TORX® TR TORX® TR TORX® TR TORX® TR TORX® TR TORX® TR 5/16" HEX TORX® TR 5/16" HEX

T10 T15 T20 T25 T27 T30 T40 T45 T50

25 25 25 25 25 25 25 30 30

10 10 10 10 10 10 10 10 10

SLEEVE SLEEVE SLEEVE SLEEVE SLEEVE SLEEVE SLEEVE SLEEVE SLEEVE

4.96 4.96 4.96 4.96 6.24 6.24 6.24 6.24 6.24

5300-TX10TRX25 5300-TX15TRX25 5300-TX20TRX25 5300-TX25TRX25 5300-TX27TRX25 5300-TX30TRX25 5300-TX40TRX25 5300-TX45TRX25 5300-TX50TRX25

TRI-WING® TRI-WING® TRI-WING® TRI-WING® TRI-WING® TRI-WING®

#0 #1 #2 #3 #4 #5

25 25 25 25 25 25

10 10 10 10 10 10

SLEEVE SLEEVE SLEEVE SLEEVE SLEEVE SLEEVE

5.92 5.92 5.92 5.92 5.92 5.92

5300-TW0X25 5300-TW1X25 5300-TW2X25 5300-TW3X25 5300-TW4X25 5300-TW5X25

3/32" 1/8" 5/32" 3/16" 7/32" 3MM 4MM 5MM 6MM

25 25 25 25 25 25 25 25 25

10 10 10 10 10 10 10 10 10

SLEEVE SLEEVE SLEEVE SLEEVE SLEEVE SLEEVE SLEEVE SLEEVE SLEEVE

4.40 4.40 4.40 4.40 4.40 4.40 4.40 4.40 4.40

5300-IH3/32X25 5300-IH1/8X25 5300-IH5/32X25 5300-IH3/16X25 5300-IH7/32X25 5300-IH3X25 5300-IH4X25 5300-IH5X25 5300-IH6X25

#4 #6 #8 #10

25 25 25 25

10 10 10 10

SLEEVE SLEEVE SLEEVE SLEEVE

4.40 4.40 4.40 4.40

5300-PD4X25 5300-PD6X25 5300-PD8X25 5300-PD10X25

–

SLEEVE

6.17

5300-TLX25

TYPE

IN-HEX IN-HEX IN-HEX IN-HEX IN-HEX IN-HEX IN-HEX IN-HEX IN-HEX PIN DRIVE PIN DRIVE PIN DRIVE PIN DRIVE TRI-LOBULAR

PART NUMBER

For insert bit sets and power bit sets see page 201

PAGE 194

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 194

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:39 PM

SCREWDRIVER BITS BORDO STD POWER BITS

GROUP

SCRW

SIZE

OAL MM

PACK QTY

PACK TYPE

$ EACH

PHILLIPS® PHILLIPS® PHILLIPS® PHILLIPS® PHILLIPS® PHILLIPS®

#1 #2 #2 #2 #2 #3

50 50 75 100 150 50

10 10 10 10 10 10

SLEEVE SLEEVE SLEEVE SLEEVE SLEEVE SLEEVE

1.56 1.56 2.41 3.56 4.39 1.56

5400-PH1X50 5400-PH2X50 5400-PH2X75 5400-PH2X100 5400-PH2X150 5400-PH3X50

GRIPPA® GRIPPA® GRIPPA® GRIPPA®

2 2 2 2

50 75 100 150

10 10 10 10

SLEEVE SLEEVE SLEEVE SLEEVE

1.56 2.41 3.56 4.39

5400-PH2GX50 5400-PH2GX75 5400-PH2GX100 5400-PH2GX150

POZIDRIV® POZIDRIV® POZIDRIV® POZIDRIV®

#1 #2 #2 #3

50 50 150 50

10 10 10 10

SLEEVE SLEEVE SLEEVE SLEEVE

1.56 1.56 4.39 1.56

5400-PZ1X50 5400-PZ2X50 5400-PZ2X150 5400-PZ3X50

5MM 6MM 8MM 10MM 12MM

50 50 50 50 50

10 10 10 10 10

SLEEVE SLEEVE SLEEVE SLEEVE SLEEVE

2.07 2.07 2.54 3.99 4.57

5400-HX5X50 5400-HX6X50 5400-HX8X50 5400-HX10X50 5400-HX12X50

SQUARE RECESS SQUARE RECESS SQUARE RECESS SQUARE RECESS SQUARE RECESS SQUARE RECESS SQUARE RECESS

#1 #1 #1 #2 #2 #2 #2

50 100 150 50 75 100 150

10 10 10 10 10 10 10

SLEEVE SLEEVE SLEEVE SLEEVE SLEEVE SLEEVE SLEEVE

1.44 3.56 4.39 1.44 2.41 3.56 4.39

5400-SR1X50 5400-SR1X100 5400-SR1X150 5400-SR2X50 5400-SR2X75 5400-SR2X100 5400-SR2X150

SLOTTED SLOTTED SLOTTED SLOTTED SLOTTED

#3 #4 #5 #6 #8

50 50 50 50 50

10 10 10 10 10

SLEEVE SLEEVE SLEEVE SLEEVE SLEEVE

1.56 1.56 1.56 1.56 2.41

5400-SL3X50 5400-SL4X50 5400-SL5X50 5400-SL6X50 5400-SL8X50

TYPE

HEX HEX HEX HEX HEX

PART NUMBER

Bordo's range of IMPACT powerbits are engineered for optimum performance in impact drivers - see page 190

See pages 200 for the complete range of Bordo Plus high performance magnetic bit holders.

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 195

WWW.BORDO.COM.AU

PAGE 195 21/04/12 6:39 PM

SCREWDRIVER BITS DBL ENDED NUTSETTERS

GROUP

SCRW SIZE

OAL MM

PACK QTY

PACK TYPE

$ EACH

PHILLIPS® PHILLIPS® PHILLIPS® PHILLIPS® PHILLIPS®

#2 #2 #2 #2 #2

45 65 100 150 200

10 10 10 10 10

SLEEVE SLEEVE SLEEVE SLEEVE SLEEVE

2.22 2.37 2.56 6.06 6.76

5500-PH2DX45 5500-PH2DX65 5500-PH2DX100 5500-PH2DX150 5500-PH2DX200

POZIDRIV® POZIDRIV®

#2 #2

45 65

10 10

SLEEVE SLEEVE

2.22 2.37

5500-PZ2DX45 5500-PZ2DX65

SQUARE RECESS

SLEEVE

2.22

5500-SR2DX45

#2/5MM

SLEEVE

2.51

5500-PH2SL5X45

TYPE

Standard Nutsetters feature a small internal chamfer to facilitate quick screw engagement. The chamfer also reduces marking of the head–shoulder junction when using painted hex head screws.

PHILLIPS®

SLOTTED

GROUP

SCRW

SIZE

OAL MM

PACK QTY

PACK TYPE

$ EACH

NUTSETTER NUTSETTER

1/4" 1/4"

42 65

10 10

SLEEVE SLEEVE

5.92 6.40

5600-NS1/4X42 5600-NS1/4X65

NUTSETTER

3/16"

SLEEVE

5.92

5600-NS3/16X42

NUTSETTER NUTSETTER NUTSETTER NUTSETTER NUTSETTER NUTSETTER

5/16" 5/16" 5/16" 5/16" 5/16" 5/16"

42 65 100 150 200 300

10 10 10 10 10 10

SLEEVE SLEEVE SLEEVE SLEEVE SLEEVE SLEEVE

5.92 6.40 9.02 12.22 16.69 21.16

5600-NS5/16X42 5600-NS5/16X65 5600-NS5/16X100 5600-NS5/16X150 5600-NS5/16X200 5600-NS5/16X300

NUTSETTER – FLAT NUTSETTER – FLAT

5/16" 5/16"

42 65

10 10

SLEEVE SLEEVE

5.92 6.40

5600-NS5/16X42F 5600-NS5/16X65F

NUTSETTER NUTSETTER NUTSETTER NUTSETTER

3/8" 3/8" 3/8" 3/8"

42 65 150 200

10 10 10 10

SLEEVE SLEEVE SLEEVE SLEEVE

6.40 6.76 18.49 20.73

5600-NS3/8X42 5600-NS3/8X65 5600-NS3/8X150 5600-NS3/8X200

NUTSETTER

10MM

SLEEVE

6.76

5600-NS10X65

NUTSETTER

7/16"

SLEEVE

10.42

5600-NS7/16X65

TYPE

Flat Nutsetters provide maximum screw engagement and minimise cam-out when using hex screws with small head heights.

All Bordo Nutsetters are manufactured from premium heat treated alloy steel and feature powerful magnets. The universal 1/4" hex shank is suitable for use in most power tools and quick change adaptors/ extensions.

PAGE 196

PART NUMBER

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 196

PART NUMBER

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:40 PM

SCREWDRIVER BITS ADAPTORS HOLDERS

SCRW OAL MM

PACK QTY

PACK TYPE

$ EACH

ADAPTORS 1/4" HEX - 3/8" SQUARE 1/4" HEX - 3/8" SQUARE 1/4" HEX - 1/2" SQUARE 1/4" HEX - 1/2" SQUARE 1/4" HEX - 1/4" SQUARE 1/4" HEX - 1/4" SQUARE 1/4" HEX - 1/4" SQUARE 1/4" HEX - 1/4" SQUARE 1/4" HEX - 3/8" SQUARE

M–M M–M M–M M–M M–M M–M M–M F–F F–F

50 75 50 75 51 100 150 50 50

5 5 5 5 5 5 5 5 5

SLEEVE SLEEVE SLEEVE SLEEVE SLEEVE SLEEVE SLEEVE SLEEVE SLEEVE

4.82 5.34 6.23 6.76 2.82 5.10 6.33 14.71 18.45

5610-SD3/8X50 5610-SD3/8X75 5610-SD1/2X50 5610-SD1/2X75 5610-SD1/4X51 5610-SD1/4X100 5610-SD1/4X150 5620-FSD1/4X50 5620-FSD3/8X50

MAGNETIC HOLDERS STANDARD BIT HOLDER STANDARD BIT HOLDER STANDARD BIT HOLDER C-RING HOLDER S/STEEL 5/16" BIT HOLDER SDS PLUS BIT HOLDER

1/4" 1/4" 1/4" 1/4" 5/16" 1/4"

50 75 150 75 75 75

5 5 5 5 5 5

SLEEVE SLEEVE SLEEVE SLEEVE SLEEVE SLEEVE

7.17 7.81 15.61 22.48 13.54 20.89

5350-MH1/4X50 5350-MH1/4X75 5350-MH1/4X150 5350-MHC1/4X75 5350-MH5/16BDX75 5350-SDSX75

5750-14X65

GROUP

PART NUMBER

5610-SD1/4X51

SIZE

TYPE

5620-FSD1/4X50

GROUP

PHEX SIZE

OAL MM

PACK QTY

PACK TYPE

$ EACH

QUICK CHANGE QUICK CHANGE HOLDER QUICK CHANGE EXT. QUICK CHANGE EXT.

1/4" 1/4" 1/4"

65 150 300

1 1 1

SLEEVE SLEEVE SLEEVE

12.12 16.57 18.35

5750-14X65 5750-14X150 5750-14X300

HANDLE QUICK CHANGE HANDLE

1/4"

–

DISPLAY

23.59

5750-14DH

PART NUMBER

Quick Change Handle Bordo's quick change screwdriver bit handle is machined from a solid aluminium billet with fine knurling for the ultimate nonslip grip. Each handle features two click-in quick change sockets to suit all standard 1/4" hex shank accessories. Ideal for use with with any of Bordo's extensive range of premium quality powerbits.

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 197

NEW PRODUCT 5350-SDSX75

5750-14X150

5350-MH1/4X75

TYPE

WWW.BORDO.COM.AU

PAGE 197 21/04/12 6:40 PM

SCREWDRIVER BITS BORDO STD HANG SELL

SCRW

PHILLIPS® PHILLIPS® PHILLIPS® POZIDRIV® POZIDRIV® POZIDRIV® HEX SLOTTED SLOTTED SLOTTED

SIZE

OAL MM

PACK QTY

PACK TYPE

$ CLAM

PART NUMBER

#1 #2 #3 #1 #2 #3 5 #4 #5 #6

25 25 25 25 25 25 25 25 25 25

2 2 2 2 2 2 2 2 2 2

CLAM CLAM CLAM CLAM CLAM CLAM CLAM CLAM CLAM CLAM

3.37 3.37 3.37 3.37 3.37 3.37 3.37 3.37 3.37 3.37

5300-PH1X25S 5300-PH2X25S 5300-PH3X25S 5300-PZ1X25S 5300-PZ2X25S 5300-PZ3X25S 5300-HX5X25S 5300-SL4X25S 5300-SL5X25S 5300-SL6X25S

GROUP

PHILLIPS x 25MM

1/4" SHANK

HEAD

MAGNETIC

SCRW

TYPE – STANDARD PHILLIPS® PHILLIPS® PHILLIPS® PHILLIPS® PHILLIPS® PHILLIPS® POZIDRIV® POZIDRIV® POZIDRIV® POZIDRIV® SQUARE RECESS SQUARE RECESS SQUARE RECESS SQUARE RECESS SLOTTED SLOTTED SLOTTED SLOTTED SLOTTED DOUBLE ENDED PHILLIPS® PHILLIPS® PHILLIPS® POZIDRIV® POZIDRIV® PHILLIPS® SLOTTED

PAGE 198

No.2

Insert Bits

TYPE – STANDARD

SCREWDRIVER BITS

GROUP

SIZE

OAL MM

PACK QTY

PACK TYPE

$ CLAM

#1 #2 #2 #2 #2 #3 #1 #2 #2 #3 #1 #1 #2 #2 #3 #4 #5 #6 #8

50 50 75 100 150 50 50 50 150 50 100 150 100 150 50 50 50 50 50

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

CLAM CLAM CLAM CLAM CLAM CLAM CLAM CLAM CLAM CLAM CLAM CLAM CLAM CLAM CLAM CLAM CLAM CLAM CLAM

2.69 2.69 3.28 6.38 7.34 2.69 2.69 2.69 7.34 2.69 6.38 7.34 6.38 7.34 2.69 2.69 2.69 2.69 3.43

5400-PH1X50S 5400-PH2X50S 5400-PH2X75S 5400-PH2X100S 5400-PH2X150S 5400-PH3X50S 5400-PZ1X50S 5400-PZ2X50S 5400-PZ2X150S 5400-PZ3X50S 5400-SR1X100S 5400-SR1X150S 5400-SR2X100S 5400-SR2X150S 5400-SL3X50S 5400-SL4X50S 5400-SL5X50S 5400-SL6X50S 5400-SL8X50S

#2 #2 #2 #2 #2 #2/5MM

45 65 100 45 65 5

1 1 1 1 1 1

CLAM CLAM CLAM CLAM CLAM CLAM

2.37 2.37 2.87 2.37 2.69 2.80

5500-PH2DX45S 5500-PH2DX65S 5500-PH2DX100S 5500-PZ2DX45S 5500-PZ2DX65S 5500-PH2SL5X45S

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 198

PART NUMBER

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:40 PM

SCREWDRIVER BITS BORDO STD HANG SELL

GROUP

1/4" SHANK

5/16" 7.94MM

x 65mm

HEAD

One Piece

NUTSETTER

MAGNETIC

SCRW

TYPE – STANDARD NUTSETTER NUTSETTER NUTSETTER NUTSETTER NUTSETTER NUTSETTER MAGNETIC HOLDERS STANDARD BIT HOLDER

SIZE

OAL MM

PACK QTY

PACK TYPE

$ EACH

PART NUMBER

1/4" 1/4" 5/16" 5/16" 3/8" 3/8"

42 65 42 65 42 65

1 1 1 1 1 1

CLAM CLAM CLAM CLAM CLAM CLAM

7.23 8.50 7.23 8.50 8.50 8.78

5600-NS1/4X42S 5600-NS1/4X65S 5600-NS5/16X42S 5600-NS5/16X65S 5600-NS3/8X42S 5600-NS3/8X65S

1/4"

CLAM

8.24

5350-MH1/4X75S

MAGNETIC

$ MERCHANDISER 917.22

MERCHANDISER TYPE SCREWDRIVER MERCHANDISER

MERCHANDISER CONTENTS

STYLE INSERT BITS HEX 5MM PHILLIPS #1 PHILLIPS #2 PHILLIPS #3 POZIDRIV #1 POZIDRIV #2 SLOT 5MM NUTSETTERS 1/4" X 42 1/4" X 65 3/8" X 42 3/8" X 65 5/16" X 42 5/16" X 65 BIT HOLDER 1/4” X 75

PART NUMBER 5300-D1

QTY PIECES

PART NUMBER

8 8 8 8 8 8 8

5300-HX5X25S 5300-PH1X25S 5300-PH2X25S 5300-PH3X25S 5300-PZ1X25S 5300-PZ2X25S 5300-SL5X25S

5 5 5 5 5 5

5600-NS1/4X42S 5600-NS1/4X65S 5600-NS3/8X42S 5600-NS3/8X65S 5600-NS5/16X42S 5600-NS5/16X65S

5350-MH1/4X75S

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 199

STYLE POWER BITS PHILLIPS #1 PHILLIPS #2 PHILLIPS #2 PHILLIPS #2 PHILLIPS #2 PHILLIPS #3 POZIDRIV #1 POZIDRIV #2 POZIDRIV #3 SLOT 6MM SLOT 8MM DOUBLE ENDED PHILLIPS #2 PHILLIPS #2 PHILLIPS #2 PH #2 / SL 5MM POZIDRIV #2

QTY PIECES

PART NUMBER

8 8 8 8 8 8 8 8 8 8 8

5400-PH1X50S 5400-PH2X50S 5400-PH2X75S 5400-PH2X100S 5400-PH2X150S 5400-PH3X50S 5400-PZ1X50S 5400-PZ2X50S 5400-PZ3X50S 5400-SL6X50S 5400-SL8X50S

8 8 8 8 8

5500-PH2DX45S 5500-PH2DX65S 5500-PH2DX100S 5500-PH2SL5X45S 5500-PZ2DX65S

WWW.BORDO.COM.AU

PAGE 199 21/04/12 6:40 PM

SCREWDRIVER BITS BORDO PLUS BIT HOLDERS

BORDO PLUS BIT HOLDERS THE BORDO PLUS RANGE OF BIT HOLDERS HAVE BEEN DESIGNED TO PROVIDE OUTSTANDING FUNCTIONALITY AND OUTSTANDING TOOL LIFE. OUR QR+, MAG+ AND MPQR+ BIT HOLDERS ARE INTEGRAL COMPONENTS IN THE BORDO PLUS PREMIUM INSERT BIT PROGRAM. EACH HOLDER MUST OUTLAST HUNDREDS OR EVEN THOUSANDS OF INSERT BITS. THEREFORE WE MAKE NO COMPROMISES IN ENSURING EACH HOLDER IS PRODUCED TO EXACTING STANDARDS.

NEW PRODUCT MAG+ USAGE Ensure an insert bit is engaged in the holder. Loosen the small locking sleeve and wind the guide sleeve and locking sleeve down to expose the end of the insert bit. Place the screw on the insert bit and wind the guide sleeve up until the head of the screw is held flat on the annular magnet. Wind the locking sleeve up firmly to lock the position. To change bits hold the locking sleeve in position and wind off the guide sleeve. Insert and new insert bit and wind the guide sleeve back on and tighten firmly against the locking sleeve. Check for positive screw engagement and adjust if necessary. The MAG+ screw grip magnetic bit holder is ideally suited for use with PH2, PH3, PZ2 and T30 screws as the annular magnet is optimally sized for their head diameter.

BORDO PLUS MP-QR+ SCREW GRIP QUICK CHANGE MAGNETIC BIT HOLDER The MP-QR+ screw grip quick change magnetic bit holder features a strong annular magnet which firmly grips the screw head and ensures a positive engagement with the insert bit. The screw is held securely on the holder and can be fastened at any angle without tilting or slipping, enabling precise fixing and one-handed operation. The MP-QR+ holder can be used with any type of standard 25mm insert bit. Insert bits click into the holder without retracting the sleeve. To remove the bit simply retract the sleeve and it automatically disengages from the holder for quick and simple replacement. Bits are held in place by a strong neodymium magnet and a retaining ring to ensure safe clamping. This strong “locking” action prevents the bit slipping from the holder or becoming jammed in a screw head.

BORDO PLUS MAG+ SCREW GRIP MAGNETIC BIT HOLDER The MAG+ screw grip magnetic bit holder features a strong annular magnet which firmly grips the screw head and ensures a positive engagement with the insert bit. The screw is held securely on the holder and can be fastened at any angle without tilting or slipping, enabling precise fixing and one-handed operation. The MAG+ holder can be used with any type of standard 25mm insert bit.

BORDO PLUS QR+ MAGNETIC BIT HOLDER Insert bits click into the holder without retracting the sleeve. To remove the bit simply retract the sleeve and it automatically disengages from the holder for quick and simple replacement. Bits are held in place by a strong neodymium magnet and a retaining ring to ensure safe clamping. This strong “locking” action prevents the bit slipping from the holder or becoming jammed in a screw head.

GROUP

SCHT TYPE

MP-QR+ BIT HOLDER MAG+ BIT HOLDER QR+ BIT HOLDER

PAGE 200

SHANK INCH

OAL MM

PACK QTY

PACK TYPE

$ EACH

PART NUMBER

1/4 1/4 1/4

70 60 60

1 1 1

BOX BOX BOX

26.55 19.96 26.07

5360-MPQR1/4X70 5360-MP1/4X60 5360-QR1/4X60

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 200

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:40 PM

SCREWDRIVER BITS BORDO STD SETS

GROUP SHANK BODY

SCRW 1/4" HEX POWER GROOVE

PIECES TOTAL

$ SET

PART NUMBER

PIECES TOTAL

$ SET

PART NUMBER

INSERT BIT SET

53.95

5300-S1

–

POWER BIT SET

–

58.96

5400-S1

SET CONTENTS

STYLE

OAL MM

QTY

PART NUMBER

STYLE

OAL MM

QTY

PART NUMBER

PHILLIPS #1 PHILLIPS #2 PH GRIPPA #2 PHILLIPS #3 SLOT 4MM SLOT 5MM SLOT 6MM HEX 5MM TRI LOBULAR POZIDRIV #1 POZIDRIV #2 POZIDRIV #3 TORX T10 TORX T15 TORX T20 TORX T25 TORX T27 TORX T30 TORX T40 SQ RECESS #1 SQ RECESS #2 SQ RECESS #3 TORX T10 TR TORX T15 TR TORX T20 TR TORX T25 TR TORX T27 TR TORX T30 TR TORX T40 TR QC ADAPTOR

25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 65

1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

5300-PH1X25 5300-PH2X25 5300-PH2GX25 5300-PH3X25 5300-SL4X25 5300-SL5X25 5300-SL6X25 5300-HX5X25 5300-TLX25 5300-PZ1X25 5300-PZ2X25 5300-PZ3X25 5300-TX10X25 5300-TX15X25 5300-TX20X25 5300-TX25X25 5300-TX27X25 5300-TX30X25 5300-TX40X25 5300-SR1X25 5300-SR2X25 5300-SR3X25 5300-TX10TRX25 5300-TX15TRX25 5300-TX20TRX25 5300-TX25TRX25 5300-TX27TRX25 5300-TX30TRX25 5300-TX40TRX25 5750-14X65

PHILLIPS #1 PHILLIPS #2 PH GRIPPA #2 PHILLIPS #3 POZIDRIV #1 POZIDRIV #2 POZIDRIV #3 SLOT 3MM SLOT 4MM SLOT 5MM SLOT 6MM SLOT 8MM HEX 5MM SQ RECESS #1 SQ RECESS #2 NUTSETTER 5/16" QC ADAPTOR

50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 42 65

2 3 3 2 2 2 2 2 2 2 2 2 2 2 2 1 1

5400-PH1X50 5400-PH2X50 5400-PH2GX50 5400-PH3X50 5400-PZ1X50 5400-PZ2X50 5400-PZ3X50 5400-SL4X50 5400-SL4X50 5400-SL5X50 5400-SL6X50 5400-SL8X50 5400-HX5X50 5400-SR1X50 5400-SR2X50 5600-NS5/16X42 5750-14X65

SET

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 201

WWW.BORDO.COM.AU

PAGE 201 21/04/12 6:40 PM

SCREWDRIVER BITS BORDO IMPACT MERCHANDISER

GROUP SHANK BODY

SCRW 1/4" HEX POWER GROOVE

5305-D2

NEW PRODUCT

MERCHANDISER TYPE IMPACT SCREWDRIVER MERCHANDISER

PIECES TOTAL 336

$ MERCHANDISER $POA

STYLE

MERCHANDISER CONTENTS

INSERT BITS POZIDRIV #2 PHILLIPS #2 HEX 5MM SQR RECESS #2 POWER BITS PHILLIPS #2 PHILLIPS #2 PHILLIPS #2 POZIDRIV #2 HEX 5MM SQ RECESS#2 SQ RECESS#2 NUTSETTERS NUTSETTER 1/4" NUTSETTER 3/8" NUTSETTER 5/16" NUTSETTER 5/16" BIT HOLDERS MAGNETIC HOLDER MAGPLUS BIT HOLDER QR PLUS BIT HOLDER MPQR PLUS BIT HOLDER

PAGE 202

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 202

PART NUMBER 5305-D2

OAL MM

QTY

PART NUMBER

25 25 25 25

30 30 20 20

5305-PZ2X25 5305-PH2X25 5305-HX5X25 5305-SR2X25

50 100 150 50 50 50 100

30 30 30 30 20 20 10

5405-PH2X50 5405-PH2X100 5405-PH2X150 5405-PZ2X50 5405-HX5X50 5405-SR2X50 5405-SR2X100

65 65 65 150

10 10 10 10

5605-NS1/4X65 5605-NS3/8X65 5605-NS5/16X65 5605-NS5/16X150

75 60 60 70

20 2 2 2

5350-MH1/4X75 5360-MP1/4X60 5360-QR1/4X60 5360-MPQR1/4X70

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:40 PM

SCREWDRIVER BITS BORDO STD MERCHANDISER

GROUP SHANK BODY

SCRW 1/4" HEX POWER GROOVE

5300-D2 5300-D2G

MERCHANDISER TYPE BENCH MERCHANDISER - SMALL

PIECES TOTAL

$ MERCHANDISER

PART NUMBER

330

1,100.50

5300-D2

BENCH MERCHANDISER GRIPPA - SMALL MERCHANDISER CONTENTS

STYLE INSERT BITS PHILLIPS #2 POZIDRIV #2 HEX 5MM POWER BITS PHILLIPS #1 PHILLIPS #2 PHILLIPS #2 PHILLIPS #2 PHILLIPS #2 SQ RECESS #2 POZIDRIV #2 HEX 5MM DOUBLE ENDED PHILLIPS #2 PHILLIPS #2 NUTSETTERS NUTSETTER 1/4" NUTSETTER 3/8" NUTSETTER 3/8" NUTSETTER 5/16" NUTSETTER 5/16" NUTSETTER 5/16" BIT HOLDERS MAGNETIC HOLDER

OAL MM

QTY

25 25 25

30 20 20

50 50 75 100 150 50 50 50

10 30 30 20 20 10 10 10

65 100

30 10

42 42 65 42 65 150

10 10 10 10 10 10

PIECES TOTAL

PART NUMBER

–

330

1,100.50

5300-D2G

PART NUMBER

STYLE

INSERT BITS PHILLIPS #2 POZIDRIV #2 HEX 5MM POWER BITS 5400-PH1X50 PHILLIPS #1 5400-PH2X50 PHILLIPS #2 5400-PH2X75 PHILLIPS #2 5400-PH2X100 PHILLIPS #2 5400-PH2X150 PHILLIPS #2 5400-SR2X50 SQ RECESS #2 5400-PZ2X50 POZIDRIV #2 5400-HX5X50 HEX 5MM DOUBLE ENDED 5500-PH2DX65 PHILLIPS #2 5500-PH2DX100 PHILLIPS #2 NUTSETTERS 5600-NS1/4X42 NUTSETTER 1/4" 5600-NS3/8X42 NUTSETTER 3/8" 5600-NS3/8X65 NUTSETTER 3/8" 5600-NS5/16X42 NUTSETTER 5/16" 5600-NS5/16X65 NUTSETTER 5/16" 5600-NS5/16X150 NUTSETTER 5/16" BIT HOLDERS 5350-MH1/4X75 MAGNETIC HOLDER 5300-PH2X25 5300-PZ2X25 5300-HX5X25

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 203

$ MERCHANDISER

OAL MM

QTY

PART NUMBER

25 25 25

30 20 20

5300-PH2GX25 5300-PZ2X25 5300-HX5X25

50 50 75 100 150 50 50 50

10 30 30 20 20 10 10 10

5400-PH2GX50 5400-PH2GX75 5400-PH2GX100 5400-PH2GX150 5400-PH1X50 5400-SR2X50 5400-PZ2X50 5400-HX5X50

65 100

30 10

5500-PH2DX65 5500-PH2DX100

42 42 65 42 65 150

10 10 10 10 10 10

5600-NS1/4X42 5600-NS3/8X42 5600-NS3/8X65 5600-NS5/16X42 5600-NS5/16X65 5600-NS5/16X150

5350-MH1/4X75

WWW.BORDO.COM.AU

NEW PRODUCT

PAGE 203 21/04/12 6:40 PM

SCREWDRIVER BITS BORDO STD MERCHANDISER

GROUP SHANK BODY

NEW PRODUCT

MERCHANDISER TYPE BENCH MERCH. – LARGE BENCH MERCH. GRIPPA – LARGE MERCHANDISER CONTENTS

SCRW 1/4" HEX POWER GROOVE

PIECES TOTAL

$ MERCHANDISER

PART NUMBER

PIECES TOTAL

$ MERCHANDISER

PART NUMBER

450

1,525.50

5300-D4

–

450

1,525.50

5300-D4G

STYLE INSERT BITS PHILLIPS #1 PHILLIPS #2 PHILLIPS #3 POZIDRIV #1 POZIDRIV #2 HEX 5MM SQR RECESS #2 POWER BITS PHILLIPS #1 PHILLIPS #2 PHILLIPS #2 PHILLIPS #2 PHILLIPS #2 POZIDRIV #1 POZIDRIV #2 HEX 5MM SLOTTED 6MM SLOTTED 8MM SQR RECESS #2 SQR RECESS #2 DOUBLE ENDED PHILLIPS #2 PHILLIPS #2 PHILLIPS #2 PHILLIPS #2 SLOT 5 NUTTSETTERS NUTSETTER 1/4" NUTSETTER 3/8" NUTSETTER 3/8" NUTSETTER 5/16" NUTSETTER 5/16" NUTSETTER 5/16" ADAPTERS 1/4" HEX -1/2" SQR 1/4" HEX -3/8" SQR BIT HOLDERS MAGNETIC HOLDER

PAGE 204

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 204

OAL QTY MM 25 25 25 25 25 25 25

10 30 10 10 10 10 10

50 100 150 50 75 50 50 50 50 50 50 150

10 10 10 30 20 10 10 10 10 10 10 10

45 65 100 20

30 30 10 10

42 42 65 42 65 150

10 10 10 20 30 10

50 50

10 10

PART NUMBER

STYLE

INSERT BITS PHILLIPS GRIPPA #2 PHILLIPS #1 PHILLIPS #3 POZIDRIV #1 POZIDRIV #2 HEX 5MM SQR RECESS #2 POWER BITS 5400-PH1X50 PHILLIPS #2 GRIPPA 5400-PH2X100 PHILLIPS #2 GRIPPA 5400-PH2X150 PHILLIPS #2 GRIPPA 5400-PH2X50 PHILLIPS #2 GRIPPA 5400-PH2X75 PHILLIPS #1 5400-PZ1X50 POZIDRIV #1 5400-PZ2X50 POZIDRIV #2 5400-HX5X50 HEX 5MM 5400-SL6X50 SLOTTED 6MM 5400-SL8X50 SLOTTED 8MM 5400-SR2X50 SQR RECESS #2 5400-SR2X150 SQR RECESS #2 DOUBLE ENDED 5500-PH2DX45 PHILLIPS #2 5500-PH2DX65 PHILLIPS #2 5500-PH2DX100 PHILLIPS #2 5500-PH2SL5X45 PHILLIPS #2 SLOT 5 NUTTSETTERS 5600-NS1/4X42 NUTSETTER 1/4" 5600-NS3/8X42 NUTSETTER 3/8" 5600-NS3/8X65 NUTSETTER 3/8" 5600-NS5/16X42 NUTSETTER 5/16" 5600-NS5/16X65 NUTSETTER 5/16" 5600-NS5/16X150 NUTSETTER 5/16" ADAPTERS 5610-SD1/2X50 1/4" HEX -1/2" SQR 5610-SD3/8X50 1/4" HEX -3/8" SQR BIT HOLDERS 5350-MH1/4X75 MAGNETIC HOLDER 5300-PH1X25 5300-PH2X25 5300-PH3X25 5300-PZ1X25 5300-PZ2X25 5300-HX5X25 5300-SR2X25

OAL QTY MM

PART NUMBER

25 25 25 25 25 25 25

30 10 10 10 10 10 10

5300-PH2GX25 5300-PH1X25 5300-PH3X25 5300-PZ1X25 5300-PZ2X25 5300-HX5X25 5300-SR2X25

50 75 100 150 50 50 50 50 50 50 50 150

30 20 10 10 10 10 10 10 10 10 10 10

5400-PH2GX50 5400-PH2GX75 5400-PH2GX100 5400-PH2GX150 5400-PH1X50 5400-PZ1X50 5400-PZ2X50 5400-HX5X50 5400-SL6X50 5400-SL8X50 5400-SR2X50 5400-SR2X150

45 65 100 20

30 30 10 10

5500-PH2DX45 5500-PH2DX65 5500-PH2DX100 5500-PH2SL5X45

42 42 65 42 65 150

10 10 10 20 30 10

5600-NS1/4X42 5600-NS3/8X42 5600-NS3/8X65 5600-NS5/16X42 5600-NS5/16X65 5600-NS5/16X150

50 50

10 10

5610-SD1/2X50 5610-SD3/8X50

5350-MH1/4X75

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:40 PM

SCREWDRIVER BITS BORDO STD MERCHANDISER

GROUP SHANK BODY

MERCHANDISER TYPE BULK CABINET MERCHANDISER MERCHANDISER CONTENTS

SCRW 1/4" HEX POWER GROOVE

PIECES TOTAL

$ MERCHANDISER

PART NUMBER

1420

4,050.60

5300-D3

STYLE INSERT BITS PHILLIPS #1 PHILLIPS #2 PHILLIPS #3 PHILLIPS #2 GRIPPA PHILLIPS #2 DRYWALL PHILLIPS #2 R/NOSE SLOT 4MM SLOT 5MM SLOT 6MM HEX 5MM POZIDRIV #1 POZIDRIV #2 POZIDRIV #3 SQUARE RECESS #1 SQUARE RECESS #2 SQUARE RECESS #3 TORX T10 TORX T15 TORX T20 TORX T25 TORX T27 TORX T30 TORX T40 POWER BITS PHILLIPS #1 PHILLIPS #2 PHILLIPS #2 PHILLIPS #2 PHILLIPS #2 PHILLIPS #3 PHILLIPS #2 GRIPPA PHILLIPS #2 GRIPPA PHILLIPS #2 GRIPPA PHILLIPS #2 GRIPPA HEX 5MM SLOT 4MM SLOT 5MM SLOT 6MM SLOT 8MM

OAL QTY MM 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25

10 100 10 50 10 10 10 10 10 50 10 50 10 10 10 10 10 10 10 10 10 10 10

50 50 75 100 150 50 50 75 100 150 50 50 50 50 50

20 100 50 50 20 10 50 20 20 20 20 10 10 10 10

PART NUMBER

POWER BITS 5300- PH1X25 POZIDRIV #1 5300-PH2X25 POZIDRIV #2 5400-PH3X25 POZIDRIV #2 5300-PH2GX25 POZIDRIV #3 5300-PH2DWX25 SQUARE RECESS #1 5300-PH2RNX25 SQUARE RECESS #1 5300-SL4X25 SQUARE RECESS #1 5300-SL5X25 SQUARE RECESS #2 5300-SL6X25 SQUARE RECESS #2 5300-HX5X25 SQUARE RECESS #2 DOUBLE ENDED 5300-PZ1X25 5300-PZ2X25 PHILLIPS #2 5300-PZ3X25 PHILLIPS #2 5300-SR1X25 PHILLIPS #2 5300-SR2X25 POZIDRIV #2 5300-SR3X25 POZIDRIV #2 5300-TX10X25 PHILLIPS #2 SLOT 5MM 5300-TX15X25 NUTSETTERS 5300-TX20X25 NUTSETTER 1/4" 5300-TX25X25 NUTSETTER 5/16" 5300-TX27X25 NUTSETTER 3/8" 5300-TX30X25 NUTSETTER 1/4" 5300-TX40X25 NUTSETTER 5/16" NUTSETTER 3/8" 5400-PH1X50 NUTSETTER 7/16" 5400-PH2X50 NUTSETTER 5/16" SQUARE DRIVE 5400-PH2X75 5400-PH2X100 SQUARE DRIVE 3/8" 5400-PH2X150 SQUARE DRIVE 3/8" 5400-PH3X50 SQUARE DRIVE 1/2" 5400-PH2GX50 SQUARE DRIVE 1/2" 5400-PH2GX75 BIT HOLDERS 5400-PH2GX100 MAGNETIC HOLDER 5400-PH2GX150 5400-HX5X50 5400-SL4X50 5400-SL5X50 5400-SL6X50 5400-SL8X50

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 205

OAL QTY MM

STYLE

PART NUMBER

50 50 150 50 50 100 150 50 100 150

20 50 10 10 10 10 10 10 10 10

5400-PZ1X50 5400-PZ2X50 5400-PZ2X150 5400-PZ3X50 5400-SR1X50 5400-SR1X100 5400-SR1X150 5400-SR2X50 5400-SR2X100 5400-SR2X150

45 65 100 45 65 45

50 50 10 10 10 10

5500-PH2DX45 5500-PH2DX65 5500-PH2DX100 5500-PZ2DX45 5500-PZ2DX65 5500-PH2SL5X45

42 42 42 65 65 65 65 150

20 20 20 20 20 50 50 10

5600-NS1/4X42 5600-NS5/16X42 5600-NS3/8X42 5600-NS1/4X65 5600-NS5/16X65 5600-NS3/8X65 5600-NS7/16X65 5600-NS5/16X150

50 75 50 75

10 10 10 10

5610-SD3/8X50 5610-SD3/8X75 5610-SD1/2X50 5610-SD1/2X75

5350-MH1/4X75

WWW.BORDO.COM.AU

PAGE 205 21/04/12 6:40 PM

SCREWDRIVER BITS DUST BOWL TEMPLATES

GROUP MATERIAL APERTURE RE-INFORCING PACKAGING

DIAMETER MM INCH 265 10-1/2

DEPTH MM 115

REMG FLEXIBLE POLYMER HEAVY DUTY PLASTIC HANG SELL

PACK QTY 5

GROUP PRODUCT HOLDING METHOD SUITS DRILL/HOLESAW SIZES SUITS DRILL/HOLESAW TYPE PACKAGING

DESCRIPTION HOLESAW TEMPLATE DRILLING TEMPLATE

PAGE 206

$ EACH 39.89

DIMD HOLESAW TEMPLATE SUCTION CUP 4MM TO 83MM BRILLIANT DIAMOND HOLESAWS HANG SELL

PACK QTY 1 1

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 206

PART NUMBER 7095-DB1

$ EACH 69.53 –

PART NUMBER 2715-HT –

DIMD DRILLING TEMPLATE SUCTION CUP 4 TO 13MM, 5/32 TO 1/2” DIAMOND MIST DRILL HANG SELL

$ EACH – 42.83

PART NUMBER – 2715-DT

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:40 PM

SCREWDRIVER BITS QC ADAPTORS & EXTENSIONS

GROUP ACCEPTS ø inch 1/4 1/4 1/4 1/4 and 3/8* 3/8* 3/8* and 7/16 3/8* and 7/16

PHEX LENGTH SHANK ADAPTOR INCH 65 150 300 65 300 300 600

PHEX

PACK QTY

$ EACH

PART NUMBER

$ EACH

PART NUMBER

$ EACH

PART NUMBER

1 1 1 1 1 1 1

12.12 16.57 18.35 – – – –

5750-14X65 5750-14X150 5750-14X300 – – – –

– – – 22.80 – – –

– – – 5750-1438X70 – – –

– – – – 29.04 – –

– – – – 5750-38X300 – –

for use with 1/4" and 3/8" shanks with or without power groove

for use with 3/8" shanks with power groove

1/4 1/4 1/4 3/8 3/8 7/16 7/16

$ EACH

PART NUMBER

– – – – – – – – – – 51.12 5750-38716X300 65.80 5750-38716X600

* These Power-Hex Adaptors suit 11/32” (nominal 3/8”)

for use with 1/4" shanks with or without power groove

for use with 3/8" and 7/16" shanks with or without power groove

NEW IMPROVED 5750-38X300

5750-38716x600 Outside diameter of 27.5mm – Ideally suited for use wth tools of diameter 28mm and above.

18193_Bordo_BuyersGuide_082011_PJ32.indd 207

Outside diameter of 27.5mm – Ideally suited for use wth tools of diameter 28mm and above.

SALES@BORDO.COM.AU

5750-38716x300

7/16" HEX SHANK ACCESSORIES

Outside diameter of 19mm – Ideally suited for use wth auger bits 20mm and above.

3/8" HEX SHANK ACCESSORIES*

5750-38x300

5750-1438x70

5750-14x300

5750-14x150

5750-14x65

1/4" HEX SHANK ACCESSORIES

WWW.BORDO.COM.AU

PAGE 207 21/04/12 6:41 PM

ABRASIVES FLAP DISCS BULK

FLAP DISCS CERAMIC ZIRCONIA Flap discs are available in a wide range of sizes and grits and are used for applications including weld seam removal, surface blending, edge grinding and weld preparation on ferrous and non-ferrous metals. Their main advantage over other types of abrasives in that they grind and finish in one operation, thereby, reducing both finishing time and finishing costs. Flap discs produce very little vibration and noise during use. Ceramic zirconia flap discs are ideal for use on ferrous metals.

GROUP TYPE MATERIAL PACKAGING

FLAP FLAP DISC CERAMIC ZIRCONIA BULK

DIAMETER MM INCH 100 4 100 4 100 4 100 4

MM 16 16 16 16

BORE INCH 5/8 5/8 5/8 5/8

GRIT 40 60 80 120

PACK QTY 10 10 10 10

$ EACH 15.77 15.77 15.77 15.77

PART NUMBER 7500-FD100Z40 7500-FD100Z60 7500-FD100Z80 7500-FD100Z120

115 115 115 115

4-1/2 4-1/2 4-1/2 4-1/2

22 22 22 22

7/8 7/8 7/8 7/8

40 60 80 120

10 10 10 10

17.33 17.33 17.33 17.33

7500-FD115Z40 7500-FD115Z60 7500-FD115Z80 7500-FD115Z120

127 127 127 127

5 5 5 5

22 22 22 22

7/8 7/8 7/8 7/8

40 60 80 120

10 10 10 10

18.75 18.75 18.75 18.75

7500-FD127Z40 7500-FD127Z60 7500-FD127Z80 7500-FD127Z120

180 180 180 180

7 7 7 7

22 22 22 22

7/8 7/8 7/8 7/8

40 60 80 120

10 10 10 10

30.13 30.13 30.13 30.13

7500-FD180Z40 7500-FD180Z60 7500-FD180Z80 7500-FD180Z120

MERCHANDISER TYPE FLAP DISC MERCHANDISER CONTENTS

$ MERCHANDISER 1,352.44 QTY SIZE/GRIT EACH MM / G 10 10 10 10 5 5 5 5 5 5 5 5

PAGE 208

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 208

100/40 100/60 100/80 100/120 115/40 115/60 115/80 115/120 127/40 127/40 127/40 127/40

PART NUMBER 7500-D2 PART NUMBER 7500-FD100Z40 7500-FD100Z60 7500-FD100Z80 7500-FD100Z120 7500-FD115Z40 7500-FD115Z60 7500-FD115Z80 7500-FD115Z120 7500-FD127Z40 7500-FD127Z60 7500-FD127Z80 7500-FD127Z120

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:41 PM

ABRASIVES FLAP WHEELS BULK

GROUP TYPE MATERIAL SPINDLE DIAMETER PACKAGING

FLWH 1 PIECE INCLUDING SPINDLE ALUMINIUM OXIDE 6MM BULK

DIAMETER MM

WIDTH MM

GRIT

PACK QTY

$ EACH

PART NUMBER

30.00 30.00 30.00 30.00 30.00 30.00 30.00 30.00 30.00 30.00 30.00 30.00

10 10 10 10 10 10 15 15 15 15 15 15

40 60 80 120 180 240 40 60 80 120 180 240

1 1 1 1 1 1 1 1 1 1 1 1

7.69 7.69 7.69 7.69 7.69 7.69 8.01 8.01 8.01 8.01 8.01 8.01

7510-30X10X40G 7510-30X10X60G 7510-30X10X80G 7510-30X10X120G 7510-30X10X180G 7510-30X10X240G 7510-30X15X40G 7510-30X15X60G 7510-30X15X80G 7510-30X15X120G 7510-30X15X180G 7510-30X15X240G

40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00 40.00

10 10 10 10 10 10 15 15 15 15 15 15 20 20 20 20 20 20 25 25 25 25 25 25

40 60 80 120 180 240 40 60 80 120 180 240 40 60 80 120 180 240 40 60 80 120 180 240

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

8.21 8.21 8.21 8.21 8.21 8.21 8.60 8.60 8.60 8.60 8.60 8.60 9.61 9.61 9.61 9.61 9.61 9.61 10.63 10.63 10.63 10.63 10.63 10.63

7510-40X10X40G 7510-40X10X60G 7510-40X10X80G 7510-40X10X120G 7510-40X10X180G 7510-40X10X240G 7510-40X15X40G 7510-40X15X60G 7510-40X15X80G 7510-40X15X120G 7510-40X15X180G 7510-40X15X240G 7510-40X20X40G 7510-40X20X60G 7510-40X20X80G 7510-40X20X120G 7510-40X20X180G 7510-40X20X240G 7510-40X25X40G 7510-40X25X60G 7510-40X25X80G 7510-40X25X120G 7510-40X25X180G 7510-40X25X240G

50.00 50.00 50.00 50.00 50.00 50.00

15 15 15 15 15 15

40 60 80 120 180 240

1 1 1 1 1 1

10.37 10.37 10.37 10.37 10.37 10.37

7510-50X15X40G 7510-50X15X60G 7510-50X15X80G 7510-50X15X120G 7510-50X15X180G 7510-50X15X240G

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 209

WWW.BORDO.COM.AU

FLAP WHEELS ALUMINIUM OXIDE Flap wheels are ideal for stock removal, deburring, cleaning, blending and finishing in a variety of applications, including stainless steel pipe fabrication and stainless steel vessels. A flap wheel is an abrasive wheel made from abrasive strips (flaps) radiating from a center hub. Bordo’s flap wheels come in many different diameters, widths and grits. The outside diameter of the wheel can range from 30mm to 80mm. Bordo’s flap wheels use Aluminium Oxide (Al2O3) as the abrasive material which is bonded to the strips of the wheel. Aluminium oxide is a fused, hard synthetic crystalline abrasive. Within the abrasive compound the Aluminium and Oxygen elements are held very close together causing these two relatively light elements to make a hard, dense crystal. On the MOHS scale of hardness Aluminium Oxide is 9.0. This hard crystal structure has a tendency to slowly dull or round and is hard to fracture.

PAGE 209 21/04/12 6:41 PM

ABRASIVES FLAP WHEELS BULK

PAGE 210

GROUP TYPE MATERIAL SPINDLE DIAMETER PACKAGING

FLWH 1 PIECE INCLUDING SPINDLE ALUMINIUM OXIDE 6MM BULK

DIAMETER MM 50.00 50.00 50.00 50.00 50.00 50.00 50.00 50.00 50.00 50.00 50.00 50.00

WIDTH MM 20 20 20 20 20 20 25 25 25 25 25 25

GRIT 40 60 80 120 180 240 40 60 80 120 180 240

PACK QTY 1 1 1 1 1 1 1 1 1 1 1 1

$ EACH 11.77 11.77 11.77 11.77 11.77 11.77 14.27 14.27 14.27 14.27 14.27 14.27

PART NUMBER 7510-50X20X40G 7510-50X20X60G 7510-50X20X80G 7510-50X20X120G 7510-50X20X180G 7510-50X20X240G 7510-50X25X40G 7510-50X25X60G 7510-50X25X80G 7510-50X25X120G 7510-50X25X180G 7510-50X25X240G

60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00 60.00

15 15 15 15 15 15 20 20 20 20 20 20 30 30 30 30 30 30 40 40 40 40 40 40 50 50 50 50 50 50

40 60 80 120 180 240 40 60 80 120 180 240 40 60 80 120 180 240 40 60 80 120 180 240 40 60 80 120 180 240

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

11.65 11.65 11.65 11.65 11.65 11.65 12.67 12.67 12.67 12.67 12.67 12.67 14.45 14.45 14.45 14.45 14.45 14.45 17.70 17.70 17.70 17.70 17.70 17.70 20.62 20.62 20.62 20.62 20.62 20.62

7510-60X15X40G 7510-60X15X60G 7510-60X15X80G 7510-60X15X120G 7510-60X15X180G 7510-60X15X240G 7510-60X20X40G 7510-60X20X60G 7510-60X20X80G 7510-60X20X120G 7510-60X20X180G 7510-60X20X240G 7510-60X30X40G 7510-60X30X60G 7510-60X30X80G 7510-60X30X120G 7510-60X30X180G 7510-60X30X240G 7510-60X40X40G 7510-60X40X60G 7510-60X40X80G 7510-60X40X120G 7510-60X40X180G 7510-60X40X240G 7510-60X50X40G 7510-60X50X60G 7510-60X50X80G 7510-60X50X120G 7510-60X50X180G 7510-60X50X240G

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 210

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:41 PM

ABRASIVES FLAP WHEELS BULK

GROUP TYPE MATERIAL SPINDLE DIAMETER PACKAGING

DIAMETER MM 80.00 80.00 80.00 80.00 80.00 80.00 80.00 80.00 80.00 80.00 80.00 80.00

FLWH 1 PIECE INCLUDING SPINDLE ALUMINIUM OXIDE 6MM BULK

WIDTH MM 30 30 30 30 30 30 50 50 50 50 50 50

GRIT 40 60 80 120 180 240 40 60 80 120 180 240

$ EACH 21.20 21.20 21.20 21.20 21.20 21.20 29.86 29.86 29.86 29.86 29.86 29.86

PACK QTY 1 1 1 1 1 1 1 1 1 1 1 1

$ MERCHANDISER 797.10

MERCHANDISER TYPE FLAP WHEEL MERCHANDISER CONTENTS

18193_Bordo_BuyersGuide_082011_PJ32.indd 211

PART NUMBER 7510-D1

WIDTH QTY DIA MM MM GRIT 3 3 3 3 3 3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

SALES@BORDO.COM.AU

PART NUMBER 7510-80X30X40G 7510-80X30X60G 7510-80X30X80G 7510-80X30X120G 7510-80X30X180G 7510-80X30X240G 7510-80X50X40G 7510-80X50X60G 7510-80X50X80G 7510-80X50X120G 7510-80X50X180G 7510-80X50X240G

30 30 30 40 40 40 50 50 50 60 60 60 60 60 60 60 80 80 80 80 80 80 80

15 15 15 15 15 15 20 20 20 30 30 30 40 40 40 40 30 30 30 30 50 50 50

60 80 120 60 80 120 60 80 120 60 80 120 180 60 80 120 40 60 80 120 60 80 120

PART NUMBER 7510-30X15X60G 7510-30X15X80G 7510-30X15X120G 7510-40X15X60G 7510-40X15X80G 7510-40X15X120G 7510-50X20X60G 7510-50X20X80G 7510-50X20X120G 7510-60X30X60G 7510-60X30X80G 7510-60X30X120G 7510-60X40X40G 7510-60X40X60G 7510-60X40X80G 7510-60X40X120G 7510-80X30X40G 7510-80X30X60G 7510-80X30X80G 7510-80X30X120G 7510-80X50X60G 7510-80X50X80G 7510-80X50X120G

WWW.BORDO.COM.AU

PAGE 211 21/04/12 6:41 PM

BRUSHWARE CUP BRUSHES HANG SELL

CUP BRUSHES TWIST KNOT Twist knot cup brushes are designed for use with electric or pneumatic high speed grinders for heavy duty cleaning of large surfaces, and also for removal of weld scale, rust, old paint, and corrosion. These brushes are constructed using hi-tensile wire to ensure superior performance and a long life. They are available with either carbon steel wire or stainless steel wire. Bordo’s twist knot cup brushes 100mm and over are bridle banded to reduce flare for a faster cutting action. Bands can easily be removed as the wire wears.

GROUP TYPE MATERIAL PACKAGING

DIAMETER MM 70* 70 70 90* 90 100 100 100* 125 125* 125* 125*

WBRS TWIST KNOT CUP BRUSH STEEL WIRE CLAM SHELL

WBRS TWIST KNOT CUP BRUSH STAINLESS STEEL WIRE CLAM SHELL

NO. OF ROWS

THREAD

WIRE DIA INCH

MAX RPM

PACK QTY

$ EACH

PART NUMBER

$ EACH

PART NUMBER

1 1 1 1 1 1 1 1 1 1 1 1

M10 X 1.25 MULTI-BORE† MULTI-BORE†

0.35 0.35 0.50 0.35 0.50 0.35 0.50 0.50 0.50 0.50 0.80 0.80

12,500 12,500 12,500 8,500 8,500 8,500 8,500 8,500 6,500 6,500 6,500 6,500

1 1 1 1 1 1 1 1 1 1 1 1

24.07 24.07 24.07 38.18 38.18 45.00 45.00 45.00 70.04 70.04 70.04 70.04

5100-70-1.3 5100-70-3.3 5100-70-3.5 5100-90-3.3 5100-90-3.5 5100-100-3.3 5100-100-3.5 5100-100-4.5 5100-125-3.5 5100-125-4.5 5100-125-3.8 5100-125-4.8

– 59.14 59.14 – – 118.16 118.16 – 183.84 – – –

– 5101-70-3.3 5101-70-3.5 – – 5101-100-3.3 5101-100-3.5 – 5101-125-3.5 – – –

M14 X 2.00 M14 X 2.00 M14 X 2.00 M14 X 2.00 5/8” X 11NC M14 X 2.00 5/8” X 11NC M14 X 2.00 5/8” X 11NC

† MULTI-BORE TWIST KNOT CUP BRUSHES HAVE A M14 X 2.00 THREAD AND ARE SUPPLIED WITH A M10 X 1.50 ADAPTOR

CUP BRUSHES CRIMPED WIRE Crimped wire cup brushes are designed for use with electric or pneumatic high speed grinders for removing scale, rust, and paint and other surface preparation including deburring and polishing. Crimped wire brushes are not as agressive as their twist knot equivalents. These brushes are constructed using hi-tensile wire to ensure superior performance and a long life. They are manufactured from carbon steel wire.

GROUP TYPE MATERIAL PACKAGING

DIAMETER MM 75* 75* 75 80 80 100 100* 120*

WBRS CRIMPED WIRE CUP BRUSH STEEL WIRE CLAM SHELL

NO. OF ROWS

THREAD

WIRE DIA INCH

MAX RPM

PACK QTY

$ EACH

PART NUMBER

1 1 1 1 1 1 1 1

M10 X 1.25 M10 X 1.50 M14 X 2.00 M14 X 2.00 5/8” X 11NC M14 X 2.00 5/8” X 11NC M14 X 2.00

0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30

12,500 12,500 12,500 8,500 8,500 6,500 6,500 6,500

1 1 1 1 1 1 1 1

25.08 25.08 25.08 31.83 31.83 40.21 40.21 52.56

5104-75-1.3 5104-75-2.3 5104-75-3.3 5104-80-3.3 5104-80-4.3 5104-100-3.3 5104-100-4.3 5104-120-3.3

* Discontinued item. Available until current stock is depleted.

PAGE 212

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 212

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:41 PM

BRUSHWARE WHEEL BRUSHES HANG SELL

GROUP TYPE MATERIAL PACKAGING

WBRS TWIST KNOT WHEEL STEEL WHEEL CLAM SHELL

WBRS TWIST KNOT BEVEL STEEL WIRE CLAM SHELL

DIAMETER MM 85 100 125 150 200

SHANK OR BORE

THREAD / BORE MM

WIRE DIA INCH

MAX RPM

PACK QTY

$ EACH

PART NUMBER

$ EACH

PART NUMBER

SHANK MULTI MULTI MULTI MULTI

6MM SHANK 16 22.2 22.2 22.2

0.5 0.5 0.5 0.5 0.5

20,000 12,500 10,000 9,000 8,500

1 1 1 1 1

23.66 27.84 34.40 36.19 52.29

5106-85.5S 5106-100.5 5106-125.5 5106-150.5 5106-200.5

– – – – –

100* 100 100 115

– – – –

M10X1.25 M10X1.50 M14X2.00 M14X2.00

0.5 0.5 0.5 0.5

12,500 12,500 12,500 12,500

1 1 1 1

– – – –

29.53 29.53 29.53 46.20

5112-100-1.5 5112-100-2.5 5112-100-3.5 5112-115-3.5

GROUP TYPE MATERIAL PACKAGING

DIAMETER SHANK/ THREAD / BORE WIRE DIA THICKNESS BORE MM INCH MM MM 100 MULTI 20 0.3 16 125 MULTI 20 0.3 18 125* MULTI 20 0.3 25 150 MULTI 32 0.3 18 150* MULTI 32 0.2 25 150 MULTI 32 0.3 25 150* MULTI 32 0.4 25 200* MULTI 32 0.2 25 200 MULTI 32 0.3 20 200 MULTI 32 0.3 25 200 MULTI 32 0.4 25 200* MULTI 32 0.3 28 BOXED 250 250* 250*

MULTI MULTI MULTI

50.8 50.8 50.8

0.3 0.3 0.3

25 40 50

WBRS CRIMPED WIRE WHEEL STEEL WIRE CLAM SHELL

WBRS CRIMPED WIRE WHEEL STAINLESS STEEL WIRE CLAM SHELL

MAX RPM

PACK QTY

$ EACH

PART NUMBER

$ EACH

PART NUMBER

8,000 6,000 6,000 8,000 8,000 8,000 8,000 4,500 4,500 4,500 4,500 4,500

1 1 1 1 1 1 1 1 1 1 1 1

26.82 41.15 49.07 33.90 – 36.69 – – 37.32 43.17 – 48.93

5108-100/16.3 5108-125/18.3 5108-125/25.3 5108-150/18.3 – 5108-150/25.3 – – 5108-200/20.3 5108-200/25.3 – 5108-200/28.3

– – – – 102.89 – 102.89 165.20 – – 165.20 –

– – – – 5109-150/25.2 – 5109-150/25.4 5109-200/25.2 – – 5109-200/25.4 –

3,000 3,000 3,000

1 1 1

87.34 106.04 130.73

BOXED 5108-250/25.3 5108-250/40.3 5108-250/50.3

– – –

* Discontinued item. Available until current stock is depleted.

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 213

WWW.BORDO.COM.AU

PAGE 213 21/04/12 6:41 PM

BRUSHWARE BRASS COATED HANG SELL

GROUP TYPE MATERIAL PACKAGING

DIAMETER MM 50 75 100 100 125* 150*

WBRS CRIMP WIRE WHEEL WITH SHANK BRASS COATED WIRE CLAM SHELL

SHANK/ BORE

SHANK / BORE WIRE DIA THICKNESS INCH INCH MM

SHANK SHANK SHANK BORE BORE BORE

1/4 1/4 1/4 1/2 5/8-1/2 5/8-1/2

0.3 0.3 0.3 0.3 0.3 0.3

7 10 12 12 16 18

WBRS CRIMP WIRE WHEEL WITH BORE BRASS COATED WIRE CLAM SHELL

MAX RPM

PACK QTY

$ EACH

PART NUMBER

$ EACH

PART NUMBER

4,500 4,500 4,500 4,500 3,750 3,750

1 1 1 1 1 1

6.73 8.22 10.72 – – –

5132-50S 5132-75S 5132-100S – – –

– – – 12.15 18.36 20.55

– – – 5132-100B 5132-125B 5132-150B

* Discontinued item. Available until current stock is depleted.

GROUP TYPE MATERIAL PACKAGING

DIAMETER MM 50 65 75 25

WBRS CRIMP WIRE CUP WITH SHANK BRASS COATED WIRE CLAM SHELL

SHANK/ BORE

SHANK / BORE WIRE DIA THICKNESS INCH INCH MM

SHANK SHANK SHANK SHANK

1/4 1/4 1/4 1/4

0.3 0.3 0.3 0.3

– – – 12

MAX RPM

PACK QTY

$ EACH

PART NUMBER

$ EACH

PART NUMBER

4,500 4,500 4,500 4,500

1 1 1 1

7.60 8.74 9.48 –

5130-50S 5130-65S 5130-75S –

– – – 9.48

– – – 5134-25S

GROUP TYPE PACKAGING

PAGE 214

WBRS CRIMP WIRE END WITH SHANK BRASS COATED WIRE CLAM SHELL

WBRS FILE CARD HANG PACK

WBRS BATTERY TERMINAL BRUSH HANG PACK

TYPE

OAL MM

WIDTH MM

LENGTH MM

PACK QTY

$ EACH

PART NUMBER

$ EACH

PART NUMBER

FILE CARD BATTERY TERMINAL BRUSH

235 85

40 15/25

115 35

1 1

8.46 –

5198-FC1 –

– 7.48

– 5196-BTMB

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 214

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:41 PM

BRUSHWARE NYLONGRIT HANG SELL

GROUP TYPE MATERIAL PACKAGING

DIAMETER MM 50* 75 100 75* 100* 125* 150*

WBRS NYLONGRIT WHEEL WITH SHANK GRIT IMPREGNATED NYLON CLAM SHELL

SHANK/ BORE SHANK SHANK SHANK BORE BORE BORE BORE

SHANK / BORE WIRE DIA THICKNESS MAX INCH INCH MM RPM 1/4" 1/4" 1/4" 1/2" 1/2" 5/8-1/2" 5/8-1/2"

– – – – – – –

4,500 4,500 4,500 4,500 4,500 3,750 3,750

WBRS NYLONGRIT WHEEL WITH BORE GRIT IMPREGNATED NYLON CLAM SHELL

PACK QTY

$ EACH

PART NUMBER

$ EACH

PART NUMBER

1 1 1 1 1 1 1

24.29 27.89 31.68 – – – –

5152-50S 5152-75S 5152-100S – – – –

– – – 24.00 31.68 37.30 43.53

– – – 5152-75B 5152-100B 5152-125B 5152-150B

* Discontinued item. Available until current stock is depleted.

GROUP TYPE MATERIAL PACKAGING

DIAMETER MM 50* 75 25

WBRS NYLONGRIT CUP WITH SHANK GRIT IMPREGNATED NYLON CLAM SHELL

SHANK/ BORE SHANK SHANK SHANK

SHANK / BORE WIRE DIA THICKNESS MAX INCH INCH MM RPM 1/4" 1/4" 1/4"

– – –

4,500 4,500 4,500

WBRS NYLONGRIT END WITH SHANK GRIT IMPREGNATED NYLON CLAM SHELL

PACK QTY

$ EACH

PART NUMBER

$ EACH

PART NUMBER

1 1 1

25.90 31.68 –

5150-50S 5150-75S –

– – 25.90

– – 5154-25S

BRUSHES NYLONGRIT Bordo’s Nylongrit brushes are constructed using grit impregnated nylon fibres that are self-replenishing as the brush ages. BENEFITS s -AINTAIN SHAPE and will not rust. s 7ILL NOT SHED BRISTLES under normal conditions. s !BRASIVE GRIT IS impregnated throughout each bristle. s 3AFER TO USE WILL not puncture skin. APPLICATIONS s 2EMOVING PAINTS corrosion, weld scale, surface rust and burns from metals. s 0REPARE PLASTIC fibreglass, and rubber surfaces for adhesives. s 0REPARING METAL surfaces for primers and paint. s #LEANING UNl NISHED tile, stone, cement, and brick mortar. s 2EMOVING OLD PAINT and finishes from wood. s #LEANING AND sanding wood turnings, railings, banisters, trim and moulding. s 2OUNDING AND blending edges, cutouts and joints.

* Discontinued item. Available until current stock is depleted.

GROUP TYPE PACKAGING

TYPE DRIVE ARBOR DRIVE ARBOR

WBRS DRIVE ARBOR HANG PACK

SHANK INCH

BORE INCH

PACK QTY

$ EACH

PART NUMBER

1/4 1/4

1/2 3/8

1 1

6.38 5.99

5194-DA1/2 5194-DA3/8

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 215

WWW.BORDO.COM.AU

PAGE 215 21/04/12 6:42 PM

BRUSHWARE SCRATCH BRUSHES HANG SELL

BRUSHES SCRATCH STEEL WIRE These brushes are suitable for a range of general applications in the paint, welding, and automotive trades. They are constructed using tempered steel wire and are the most economical general purpose brush.

GROUP MATERIAL PACKAGING

STAINLESS STEEL WIRE Stainless wire scratch brushes are primarily used for metal finishing on smooth surfaces such as plating. The stainless steel wire is non-corrosive and suitable where hygiene requirements are a consideration or where moisture is present. Stainless steel wire scratch brushes are predominantly used in the welding or painting industries. Stainless steel wire resists oxidation and rusting.

TYPE

NEW PRODUCT NEW PRODUCT

WBRS STAINLESS WIRE BOX

WBRS BRASS WIRE BOX

WIRE DIA MM

ROWS

COLOUR

BOX QTY

$ EACH

PART NUMBER

$ EACH

PART NUMBER

$ EACH

PART NUMBER

UNIVERSAL HAND UNIVERSAL HAND UNIVERSAL HAND

0.3 0.3 0.3

– – –

RED GREEN YELLOW

24 24 24

9.99 – –

5174-SW-R – –

– 13.71 –

– 5174-SS-G –

– – 13.71

– – 5174-BW-Y

WOODEN HANDLE* WOODEN HANDLE

0.3 0.3

3 4

– –

24 24

3.02 3.49

5172-SW-3R 5172-SW-4R

LONG WOODEN HANDLE LONG WOODEN HANDLE LONG WOODEN HANDLE* LONG WOODEN HANDLE*

0.33 0.35 0.28 0.33 0.35 0.28 0.35

3X19 3X19 3X19 4X19 4X19 4X19 5X19

– – – – – – –

12 12 12 12 12 12 12

5.78 – – 7.07 – – 9.65

5170-SW-3R – – 5170-SW-4R – – 5170-SW-5R

– 12.46 – – 13.39 – –

– 5170-SS-3R – – 5170-SS-4R – –

– – 9.30 – – 11.52 –

– – 5170-BW-3R – – 5170-BW-4R –

LONG W/HANDLE CONVEX PLASTIC SHOE HANDLE

0.35 0.35

3X14 4X16

– –

12 12

6.36 7.41

5170-SW-3RC 5171-SW-4RSH

WITH SCRAPER LONG WOODEN HANDLE PLASTIC HANDLE

0.33 0.33

3X19 4X11

– –

12 12

7.70 9.34

5170-SW-3RSC 5171-SW-4RSC

WELDING WELDING HMR & BRUSH

0.33

3X15

–

15.60

5173-SW-WHB

BRASS WIRE Brass bristles remove residues from metal without severely scratching the surface and are ideal for use in tooling production and aluminum welding. They may also used for cleaning grills and some ovens. Brass wire scratch brushes are LONG WOODEN HANDLE softer than tempered LONG WOODEN HANDLE steel and will not scratch enamelled LONG WOODEN HANDLE* surfaces.

NEW PRODUCT

WBRS STEEL WIRE BOX

* Discontinued item. Available until current stock is depleted.

PAGE 216

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 216

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:42 PM

BRUSHWARE POLISHING HANG SELL

GROUP TYPE USAGE BORE PACKAGING

DIAMETER MM 50 75 100 150 150 200 200

MOPS CALICO - LOOSE LEAF HIGH GLOSS POLISHING TAPERED CLAM SHELL*

MOPS STITCHED RAG GENERAL PURPOSE TAPERED CLAM SHELL*

MOPS SISAL CUTTING BACK TAPERED CLAM SHELL*

CALICO MOPS FOLDS

STICHED BAG & SISAL SECTIONS

PACK QTY

$ EACH

PART NUMBER

$ EACH

PART NUMBER

$ EACH

PART NUMBER

50 FOLD 50 FOLD 50 FOLD 50 FOLD 100 FOLD 50 FOLD 100 FOLD

1 SECTION 1 SECTION 1 SECTION 1 SECTION 2 SECTION 1 SECTION 2 SECTION

1 1 1 1 1 1 1

16.40 22.52 22.31 30.16 40.83 46.33 65.20

5200-50X50 5200-75X50 5200-100X50 5200-150X50 5200-150X100 5200-200X50 5200-200X100

11.36 18.60 19.08 19.56 27.19 22.31 34.36

5202-50X1 5202-75X1 5202-100X1 5202-150X1 5202-150X2 5202-200X1 5202-200X2

12.95 12.95 19.69 20.59 25.83 23.20 29.95

5204-50X1 5204-75X1 5204-100X1 5204-150X1 5204-150X2 5204-200X1 5204-200X2

* Mops 100mm and smaller are not supplied in clam shells

GROUP PACKAGING

COMP HANG SELL

COMPOUNDS WHITE COMBINED CUTTING & FINISHING COMPOUND Fast cutting with medium to high finish. Use on calico or stitched rag mop - can be used on sisal mops for extra cut. GREEN FINISHING COMPOUND Creates a lustrous surface. This compound achieves a superior finish on chrome, stainless steel, decorative copper and brass. Best used with a calico mop. BLUE FINISHING COMPOUND Used to produce a lustrous, smear free, high reflective surface on all metals that are suitable for lacquering. Best used with a loose leaf calico polishing mop. BROWN COMBINED CUTTING AND FINISHING COMPOUND General purpose tripoli. Use on sisal, stitched rag and calico mops. Easy to remove prior to electroplating. GREY CUTTING COMPOUND Rough cut to remove scratches, belt marks and drawing marks. Maximum abrasive content with high rate of surface removal. Fast and economical.

COLOUR WHITE LIGHT GREEN LIGHT BLUE BROWN DARK GREY

DESCRIPTION FOR HIGH GLOSS FINISH ON ALUMINIUM & ALUMINIUM ALLOYS FOR HIGH GLOSS FINISH ON COPPER, BRASS & STAINLESS STEEL FOR HIGH GLOSS FINISH ON MOST PLASTICS, SILVER, GOLD & DIE CAST METALS FOR GENERAL PURPOSE USE ON COPPER, BRASS, ALUMINIUM & MOST METALS FOR LIGHT SCRATCHES ON COPPER, BRASS, S/STEEL BEFORE HIGH GLOSS POLISHING

GROUP TYPE USAGE

THREAD / SHANK MM INCH 12 – 16 – – 1/2 – 5/8 WITH SHANK 6 –

PACK QTY

$ EACH

PART NUMBER

1 1 1 1 1

12.33 12.33 12.33 7.08 10.23

5220-1 5220-2 5220-3 5220-4 5220-5

SPIN LEFT HAND TAPERED SPINDLE HANG SELL

MC MC BSW BSW

BENCH GRINDER BENCH GRINDER BENCH GRINDER BENCH GRINDER

PACK QTY 1 1 1 1

–

USE IN A PISTOL DRILL WITH MOPS <100MM

TYPE

USE IN

18193_Bordo_BuyersGuide_082011_PJ32.indd 217

PACKAGING

SPIN RIGHT HAND TAPERED SPINDLE HANG SELL

$ EACH 28.91 28.91 28.91 28.91

PART NUMBER 5240-12L 5240-16L 5240-1/2L 5240-5/8L

$ EACH 28.91 28.91 28.91 28.91

PART NUMBER 5240-12R 5240-16R 5240-1/2R 5240-5/8R

–

28.91

5240-6S

SALES@BORDO.COM.AU

NEW

WWW.BORDO.COM.AU

PAGE 217 21/04/12 6:42 PM

BRUSHWARE POLISHING PLAN-A-GRAM

GROUP PACKAGING

WBRS HANG SELL

PLAN-A-GRAM TYPE INDUSTRIAL POLISHING INDUSTRIAL POLISHING PLAN-A-GRAM CONTENTS

QTY EACH 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

PAGE 218

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 218

WBRS HANG SELL

$ PLAN-A-GRAM

PART NUMBER

$ PLAN-A-GRAM

PART NUMBER

1,017.87 –

5200-D1 –

– 600.18

– 5200-D2

SIZE MM

DESCRIPTION MM X FOLD/SECTION

PART NUMBER

POLISHING MOPS CALICO 150MM X 100 FOLD 5200-150X100 CALICO 200MM X 100 FOLD 5200-200X100 STITCH RAG 150MM X 2 SEC. 5202-150X2 STITCH RAG 200MM X 2 SEC. 5202-200X2 SISAL 150MM X 2 SEC. 5204-150X2 SISAL 200MM X 2 SEC. 5204-200X2 POLISHING COMPOUNDS WHITE – 5220-1 LIGHT GREEN – 5220-2 LIGHT BLUE – 5220-3 BROWN – 5220-4 DARK GREY – 5220-5 TAPERED SPINDLES LEFT HANDED 12MM 5240-12L LEFT HANDED 16MM 5240-16L LEFT HANDED 1/2” 52401/2L LEFT HANDED 5/8” 5240-5/8L RIGHT HANDED 12MM 5240-12R RIGHT HANDED 16MM 5240-16R RIGHT HANDED 1/2” 5240-1/2R RIGHT HANDED 5/8” 5240-5/8R

QTY EACH 2 2 2 2 2 2 2 2 2 2 2

SIZE MM

DESCRIPTION MM X FOLD/SECTION

PART NUMBER

POLISHING MOPS CALICO 150MM X 50 FOLD 5200-150X50 CALICO 200MM X 50 FOLD 5200-200X50 STITCH RAG 150MM X 1 SEC. 5202-150X1 STITCH RAG 200MM X 1 SEC. 5202-200X1 POLISHING COMPOUNDS WHITE – 5220-1 LIGHT GREEN – 5220-2 BROWN – 5220-4 TAPERED SPINDLES LEFT HANDED 12MM 5240-12L LEFT HANDED 16MM 5240-16L LEFT HANDED 1/2” 52401/2L LEFT HANDED 5/8” 5240-5/8L

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:42 PM

BRUSHWARE

PLAN-A-GRAM

GROUP PACKAGING

WBRS HANG SELL

PLAN-A-GRAM TYPE INDUSTRIAL BRUSHWARE INDUSTRIAL BRUSHWARE PLAN-A-GRAM CONTENTS

QTY EACH

WBRS HANG SELL

$ PLAN-A-GRAM

PART NUMBER

$ PLAN-A-GRAM

PART NUMBER

1,948.97 –

5100-D1 –

– 1,598.89

– 5100-D2

SIZE MM

DESCRIPTION

PART NUMBER

TWIST KNOT CUP M10 X 1.50 5100-70-2.5 M14 X 2.00 5100-70-3.5 M14 X 2.00 5100-100-3.5 M14 X 2.00 5100-125-3.5 CRIMPED WIRE CUP 3 70 M10 X 1.50 5100-70-2.5 3 70 M14 X 2.00 5100-70-3.5 2 125 M14 X 2.00 5100-125-3.5 TWIST KNOT WHEEL 1 85 6MM SHANK 5106-85.5S CRIMPED WIRE WHEEL 4 150 X 18 32MM BORE 5108-150/18.3 4 150 X 25 32MM BORE 5108-150/25.3 4 200 X 20 32MM BORE 5108-200/20.3 4 200 X 25 32MM BORE 5108-200/25.3 UNIVERSAL HAND SCRATCH 6 STEEL WIRE 5174-SW-R 6 BRASS WIRE 5174-BW-Y 6 STAINLESS STEEL 5174-SS-G LONG WOOD HAND SCRATCH 6 4 X 19 STEEL WIRE 5170-SW-4R 6 4 X 19 BRASS WIRE 5170-BW-4R STAINLESS 6 4 X 19 5170-SS-4R STEEL 2 40 X 115 FILE CARD 5198-FC1 HANDYMAN CRIMPED WIRE WHEEL WITH SHANK 2 50X0.3X7 BRASS WIRE 5132-50S 2 75X0.3X10 BRASS WIRE 5132-75S 2 100X0.3X12 BRASS WIRE 5132-100S HANDYMAN CRIMPED WIRE CUP WITH SHANK 2 65X0.3 BRASS WIRE 5130-65S 2 75X0.3X12 BRASS WIRE 5130-75S HANDYMAN CRIMPED WIRE END WITH SHANK 2 25 BRASS WIRE 5134-25S NYLONGRIT WHEEL 2 50 NYLONGRIT 5152-50S 2 75 NYLONGRIT 5152-75S 2 100 NYLONGRIT 5152-100S NYLONGRIT CUP 2 50 NYLONGRIT 5150-50S 2 75 NYLONGRIT 5150-75S NYLONGRIT END 2 25 NYLONGRIT 5154-25S 3 3 2 2

70 70 100 125

QTY EACH

DESCRIPTION

PART NUMBER

TWIST KNOT CUP M10 X 1.50 5100-70-2.5 M14 X 2.00 5100-70-3.5 M14 X 2.00 5100-100-3.5 M14 X 2.00 5100-125-3.5 CRIMPED WIRE CUP 2 75 M10 X 1.50 5104-75-2.3 2 75 M14 X 2.00 5104-75-3.3 2 80 M14 X 2.00 5104-80-3.3 2 100 M14 X 2.00 5104-100-3.3 CRIMPED WIRE WHEEL 4 150 X 18 32MM BORE 5108-150/18.3 4 200 X 25 32MM BORE 5108-200/25.3 UNIVERSAL HAND SCRATCH 6 STEEL WIRE 5174-SW-R 6 BRASS WIRE 5174-BW-Y LONG WOOD HAND SCRATCH 6 4 X 19 STEEL WIRE 5170-SW-4R 6 4 X 19 BRASS WIRE 5170-BW-4R 6 4 X 19 STAINLESS STEEL 5170-SS-4R HANDYMAN CRIMPED WIRE WHEEL WITH SHANK 2 75X0.3X10 BRASS WIRE 5132-75S 2 100X0.3X12 BRASS WIRE 5132-100S 3 3 2 2

70 70 100 125

HANDYMAN CRIMPED WIRE CUP WITH SHANK 2 65X0.3 BRASS WIRE 5130-65S 2 75X0.3X12 BRASS WIRE 5130-75S HANDYMAN CRIMPED WIRE END WITH SHANK 2 25 BRASS WIRE 5134-25S NYLONGRIT WHEEL 2 75 NYLONGRIT 5152-75S 2 100 NYLONGRIT 5152-100S NYLONGRIT CUP 2 50 NYLONGRIT 5150-50S 2 75 NYLONGRIT 5150-75S NYLONGRIT END 2 25 NYLONGRIT 5154-25S

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 219

SIZE MM

WWW.BORDO.COM.AU

PAGE 219 21/04/12 6:42 PM

TECHNICAL DRILLS

RELATIVE CUTTING SURFACE SPEEDS, FEEDS, THRUSTS AND CUTTING FLUIDS FOR M2 HSS DRILLS BY MATERIAL

CONDITION / TREATMENT BRINELL HARDNESS NO.

CARBON STEELS

Annealed or Cold Drawn

1020 1025

174 to 241 1060 1090 ALLOY STEELS Annealed

4132 4140 4615 5140 197 to 225

M1 M2 T1 STAINLESS STEELS

Cold Drawn

304 310 316 321

120 to 240

203 303 Annealed

420 430 440

174 to 183

CAST IRON - GREY

Annealed 190 to 225 As Cast 190 to 225

CAST IRON - MALLEABLE

Malleablized & Heat Treated 202 to 225

ALUMINIUM ALLOYS

As Cast

- CAST

40 to 100 (500kg)

DIE CASTINGS

As Cast

ZINC ALLOYS

80 to 100 (500kg)

COPPER ALLOYS

As Cast 60 to 90

BRASSES & BRONZES

As Cast

- SOFT

60 to 90

HIGH TENSILE

As Cast or Heat Treated 100 to 170

PLASTICS, THERMO-PLASTICS, Extruded, Moulded or Cast POLYETHYLENE NYLON, ACRYLICS, Cast, Moulded or Filled

RE-INFORCED FIBREGLASS

PAGE 220

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 220

14 15

18 37 21 27 61 76 37 61 27 15 30

POLYCARBONATES THERMOSETTING PLASTICS,

403 405 410 416

CAST IRON - DUCTILE

20 18

4132 4140 4615 5140

HIGH SPEED

23 21

1040 1045 1050 1055

TOOL STEELS

SURFACE SPEED M / MIN

MATERIAL

FEED “F” (MM PER REVOLUTION)

THRUST “T” (KG) NOMINAL HOLE DIAMETER (MM) F

1.5

3.0

6.0

13.0

25.0

50.0

0.03

0.08

0.13

0.23

0.36

0.56

162

206

1096

2808

0.03

0.08

0.13

0.23

0.36

0.56

162

433

1096

2808

0.03

0.08

0.13

0.23

0.36

0.51

162

433

1096

2644

0.03

0.08

0.15

0.25

0.41

0.58

200

505

1299

3130

0.03

0.05

0.10

0.18

0.30

0.46

139

365

990

2476

0.03

0.05

0.08

0.13

0.20

0.30

149

377

991

2515

0.03

0.05

0.10

0.18

0.30

0.46

139

365

990

2476

0.03

0.08

0.15

0.25

0.43

0.64

185

466

1250

3050

CUTTING FLUID

Light Oil or Soluble Oil

Light Oil or Soluble Oil Medium Oil, Sulphurized Mineral Oil

Medium Oil, Sulphurized Mineral Oil

0.03

0.05

0.10

0.18

0.30

0.46

140

365

990

2476

0.03

0.08

0.15

0.25

0.41

0.64

139

365

990

2476

0.03

0.08

0.15

0.25

0.41

0.64

123

311

799

2033

0.03

0.05

0.10

0.18

0.25

0.33

243

587

1359

Sulphurized or Medium Oil

0.03

0.08

0.18

0.28

0.46

0.71

Soluble Oil

Sulphurized or Medium Oil Sulphurized or Medium Oil

145

379

958

Kerosene

0.05

0.10

0.20

0.30

0.46

0.64

Soluble Oil

110

270

635

Kerosene

0.03

0.08

0.15

0.30

0.41

0.64

Soluble Oil

154

215

999

2541

Kerosene

0.03

0.08

0.18

0.33

0.46

0.71

164

379

958

0.03

0.05

0.10

0.18

0.25

0.33

243

587

1359

0.05

0.08

0.13

0.25

0.51

0.76

291

716

0.05

0.08

0.13

0.20

0.30

0.41

206

480

0.05

0.08

0.13

0.20

0.30

0.38

206

462

Light Mineral Oil Heavy Sulphurized Oil Medium Oil, Sulphurized Mineral Oil – –

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:42 PM

TECHNICAL DRILLS

CUTTING SPEED CHART IN REVOLUTIONS PER MINUTE (RPM) CALCULATED FROM SURFACE SPEED AND DRILL DIAMETER DIAMETER

SURFACE SPEED M / MIN 10 12 15 18 20 RPM (REVOLUTIONS PER MINUTE)

3180

3980

4780

5570

6370

1910

2120

2650

3180

3720

4250

1190

1430

1590

1990

2390

2790

3180

760

960

1150

1270

1590

1910

2230

2550

530

640

800

960

1060

1330

1590

1860

2120

320

400

480

600

720

800

1000

1190

1390

1590

190

250

320

380

480

570

640

800

960

1110

1270

130

160

210

270

320

400

480

530

660

800

930

1060

110

140

180

230

270

340

410

450

570

680

800

910

100

120

160

200

240

300

360

400

500

600

700

800

23/32

110

140

180

210

270

320

350

440

530

620

710

25/32

100

130

160

190

240

290

320

400

480

560

640

7/8

120

140

170

220

260

290

360

430

510

580

15/16

110

130

160

200

240

270

330

400

460

530

–

120

140

180

210

240

290

350

410

470

1-1/8

110

130

160

190

210

270

320

370

420

1-1/4

100

120

150

180

200

250

300

350

400

1-3/8

110

140

170

190

230

280

330

370

–

110

130

160

180

220

270

310

350

1-1/2

100

130

150

170

210

250

290

340

1-9/16

100

120

140

160

200

240

280

320

–

110

140

150

190

230

270

300

1-3/4

110

130

140

180

220

250

290

1-13/16

100

120

140

170

210

240

280

1-7/8

100

120

130

170

200

230

270

–

100

110

160

190

220

250

INCH

5/64

480

640

800

960

1270

1590

1910

2390

2870

1/8

320

420

530

640

850

1060

1270

1590

5/32

240

320

400

480

640

800

960

13/64

190

250

320

380

510

640

15/64

160

210

270

320

420

5/16

120

160

200

240

25/64

130

160

15/32

110

35/64

5/8

COBALT DRILLS (HSS-Co5) Cobalt drills were developed to tackle the drilling of tough materials like stainless steel, inconel, tool steels, titanium alloys, etc. Cobalt tools are also used to increase productivity for machining normal steels and other regular materials where increased tool life and faster drilling speeds may offer significant benefits. When using cobalt drills we recommend up to a 20% increase in cutting speed over standard HSS drills. Increases in speeds of up to 40% or more may be possible in some machining applications.

Use these two charts to calculate the correct cutting parameters for drilling using an M2 HSS drill bit. FOR EXAMPLE When drilling a 8mm hole into 1060 Carbon Steel first check the chart opposite where you can see the correct surface speed is 20 metres per minute (m/min). To convert this to RPM use the chart above. The intersection of the 20 m/min surface speed with an 8mm drill diameter shows and optimum speed of 800 RPM. In addition to speed, the table opposite also shows FEED rate in mm per revolution and THRUST pressure in kg. To maximise cutting efficiency and bit life a suitable cutting fluid (lubricant) should also be used.

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 221

WWW.BORDO.COM.AU

PAGE 221 21/04/12 6:42 PM

TECHNICAL DRILLS

TIPS FOR SUCCESSFUL DRILLING s s s s

s s s s s s

%NSURE WORKPIECE IS l RMLY AND SECURELY FASTENED !VOID EXCESS LATERAL LOADS %NSURE COLLETS AND DRILL CHUCKS ARE IN GOOD CONDITION AND WILL NOT ALLOW DRILL SLIPPAGE "OTH DRILL AND component damage can occur. 7HEN USING TAPER SHANK DRILLS ENSURE ALL TAPER SLEEVES ARE CLEAN AND IN GOOD CONDITION .EVER ALLOW the drill to drive off the tang. This is an indication that either the drill, the sleeve, or both are damaged. Use only soft faced hammers to drive the taper shank into the sleeve. Use a proper drift key to remove the shank from the sleeve. %NSURE DRILL IS KEPT SHARP AND SHARPEN BEFORE POINT OF FAILURE )F ALLOWED TO BECOME BLUNT EXTRA GRIND ing will be needed to bring the drill back to optimum performance. +EEP THE m UTES FREE FROM SWARF #LOGGED m UTES WILL HAMPER DRILL PERFORMANCE 5SE ADEQUATE COOLANT PARTICULARLY AT THE DRILL POINT WHEREVER POSSIBLE !VOID EXCESSIVE SPEED AND FEED RATES 5SE THE CHARTS IN THIS CATALOGUE )F UNSURE OF THE CORRECT SPEED or feed rate to use, it is generally better to start at low speeds and feeds, and build up as appropriate. 7HEN RESHARPENING IT IS IMPORTANT THAT ALL WEAR IS REMOVED AND THE CORRECT POINT GEOMETRY IS MAIN tained. Do not overheat or burn the drill when grinding. )F THE HOLE IS DEEPER THAN TIMES ITS DIAMETER IT IS CONSIDERED A DEEP HOLE 7HEN DRILLING DEEP HOLES peck drilling is needed in order for the coolant to reach the point of the drill, and also to aid chip clearance.

RECOMMENDED SPEEDS AND FEEDS FOR DEEP HOLE DRILLING SPEEDS 3 x Diameter of Drill 4 x Diameter of Drill 5 x Diameter of Drill >6 x Diameter of Drill

10% speed reduction 20% speed reduction 30% speed reduction 40% speed reduction

FEEDS 3 x Diameter of Drill 4 x Diameter of Drill 5-8 x Diameter of Drill

10% feed reduction 10% feed reduction 20% feed reduction

CAUSES AND SOLUTIONS FOR COMMON DRILLING PROBLEMS CHIPPING OR BREAKING OF LIPS CAUSE Excessive lip clearance angles behind cutting edge. SOLUTION Reduce lip clearance as per charts. WORN OUTER CORNERS CAUSE Peripheral speed too great for material being drilled. SOLUTION Reduce cutting speed to correct speed. Increase feed rate. Improve coolant flow. Check clearance and alignment. Add corner break. BROKEN OUTER CORNERS CAUSES Drilling thin material that is insufficiently supported. Using a two flute drill to enlarge the diameter of an existing hole. SOLUTIONS Use a sheet metal drill and clamp the workpiece securely. Ream the hole to correct size. DRILL SPLITS UP WEB CAUSES Feed rate too great. Not enough lip clearance behind cutting edge. Excessive web thinning. Using hard object to seat the drill in sleeve. SOLUTIONS Reduce feed to correct rate (see charts). Ensure lip clearance is correct. Ensure web thickness is not less than 10% of the drill diameter. Use soft object to seat the drill in sleeve (e.g. copper or wood). OVERSIZE OR OUT-OF-ROUND HOLES CAUSES Unequal point angles. Flutes are congested with chips. Loose spindle or worn drill sleeve. Unsecured workpiece which moves during drilling. SOLUTIONS Ensure points are resharpened accurately. Ensure flutes are kept free from swarf. Ensure spindle or drill sleeve is in good condition. Secure workpiece. ROUGH HOLE FINISH CAUSES Drill is blunt. Insufficient coolant supply to drill point. Feed rate too great. Possible chip congestion in flutes. SOLUTIONS Sharpen the drill. Ensure coolant is reaching the drill point. Use correct feed rate (see charts). Ensure flutes are kept free from swarf. BROKEN OR DAMAGED TANG CAUSE Poor fit between drill sleeve and the drill shank. SOLUTIONS Only use sleeves that are in good condition. Ensure both drill shank and sleeve are clean. DRILL RUBBING AND NOT ENTERING WORKPIECE CAUSES Insufficient lip clearance. Web too thick. Chisel angle too high. SOLUTIONS Increase lip clearance (see charts). Reduce web thickness as per charts. Sharpen drill correctly to ensure correct chisel angle. CRACKS IN CUTTING EDGES CAUSE Point was overheated and cooled to quickly when resharpened. SOLUTION Use coolant when grinding, and quench frequently in soluble oil. DRILL BREAKS AT FLUTE RUNOUT CAUSES Workpiece moved during drilling. Flutes clogged with swarf. Incorrect drill for application. SOLUTIONS Secure workpiece. Maintain clear flutes by peck drilling. Use correct drill for application.

PAGE 222

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 222

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:42 PM

TECHNICAL DRILLS

DRILL NOMENCLATURE AND POINT STYLES AXIS TANG CHISEL EDGE ANGLE BODY CLEARANCE DIAMETER

POINT ANGLE LAND

WEB THICKNESS

FLANK CHISEL EDGE

MORSE TAPER SHANK

HEEL LIP CYLINDRICAL LAND WIDTH (MARGIN)

RECESS LIP CLEARANCE ANGLE

HELIX ANGLE FLUTE RUNOUT

OVERALL LENGTH (OAL)

HEEL BODY LENGTH

VIEW OF LIP CLEARANCE

FLUTE LENGTH (FL)

FLUTE LEAD OF HELIX

LIP CLEARANCE ANGLE DRILL SIZE (MM) 0.3 to 3.0 3.1 to 6.0 6.1 to 12.0 12.1 to 20.0 20.1 and over

ANGLE (DEGREES) 18 – 24 14 – 18 10 – 14 8 – 12 6 – 10

CYLINDRICAL LAND (MARGIN)

BODY CLEARANCE DIAMETER

DRILL POINT STYLES 118º

118º

130º

135º

118º

130º

118º

70º

125º–135º

Standard Point (chisel point) Standard point is suitable for general purpose drilling.

140º–145º

Split Point The 130º Split Point provides self centering and easier penetration. The 33º helix open profile flute design has reinforced web for high rigidity under extreme conditions.

125º–135º

140º–145º

135º Split Point (crankshaft point) Split point is self centering and the short distance from the drill axis to the outer corners results in faster penetration, reducing end thrust. The 135º point should be used to cut harder steel materials especially in deep hole applications.In these situations it will produce thicker chips minimising work hardening of the cavity. Faster penetration reduces abrasion and friction along the cutting edges.

Notched Point A variation on standard chisel point providing faster starting and reduced drill wander. Suitable for general purpose drilling.

125º–135º

140º–145º

125º–135º

130º Notched Point The notched point reduces end thrust and optimizes centre cutting efficiency with chisel strength.

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 223

WWW.BORDO.COM.AU

PAGE 223 21/04/12 6:42 PM

TECHNICAL DRILLS

COMMON RESHARPENING ERRORS ON STANDARD POINTS LIP CLEARANCE ANGLE TOO GREAT

LIP CLEARANCE ANGLE TOO SMALL

CHISEL ANGLE TOO GREAT

CHISEL ANGLE TOO SMALL

UNEQUAL LIP LENGTH

DIFFERENCE IN RELATIVE LIP HEIGHT (DUE TO UNEQUAL LIP LENGTH) WILL CAUSE AN OVERSIZE HOLE

UNEVEN WEB THINNING

WEB THINNING TOO GREAT

WEB THINNING IS RECOMMENDED FOR s 2%34/2).' #()3%, %$'% 4/ 4(% /2)').!, ,%.'4( !&4%2 -5,4)0,% 2%'2).$3 s ,!2'%2 $2),,3 7(%2% -!#().% 4(2534 )3 ,)-)4%$ s $)&&)#5,4 -!4%2)!,3

DRILL NOMENCLATURE AND DEFINITIONS AXIS BACK TAPER BODY BODY CLEARANCE CHISEL EDGE CHISEL EDGE ANGLE CYLINDRICAL LAND (MARGIN) CYLINDRICAL LAND WIDTH DIAMETER FLANK FLUTE LENGTH FLUTE RUNOUT FLUTES HEEL HELIX ANGLE LAND LEAD OF HELIX LIP CLEARANCE ANGLE LIPS OVERALL LENGTH POINT POINT ANGLE RELATIVE LIP HEIGHT RECESS SHANK TANG WEB (CORE) WEB (CORE) THICKNESS

PAGE 224

The longitudinal centre line of the drill. The slight decrease in diameter from the front to the back in the drill body. The portion of the drill extending from the cutting lips to the shank. The portion of the land that has been cut away to provide diametrical clearance. The edge formed by the intersection of the cutting lips. The included angle betwen the chisel edge and the cutting lip when viewed from the point end of the drill. The cylindrical portion of the land that is not cut away to provide clearance. The distance between the leading edge and the heel of the land, measured at a right angle (Margin Width) to the leading edge. The measurement across the cylindrical lands (margin) at the outer corners of the drill. The surface of the drill point extending behind the lip to follow the flute. The axial length from the extreme end of the point to the termination of the flutes at the shank end of the drill. As this includes the flute runout, flute length does not indicate the usable length of the drill. The end of the flutes near the shank where they join the drill body. The grooves in the body of a drill which provide the cutting lips, allow swarf and chip ejection, and permit cutting fluid to reach the cutting lips. The edge formed by the intersection of the body clearance and the flute surface. The angle formed by the leading edge of the land and the plane containing the axis of the drill. The peripheral portion of the body between adjacent flutes. The distance measured parallel to the axis between corresponding points on the leading edge of the land in one turn of the drill. The angle formed between the outer corner of the lip and a plane at right angles to the axis of the drill, and usually measured at the periphery of the drill. The cutting edges of a two flute drill extending from the chisel edge to the periphery of the drill. The total length measured from the extreme point to the end of the shank. The sharpened end of the drill comprising the cutting lips, chisel edge, lands and the web. The included angle between the cutting lips. The relative position of the lips measured at the outer corners in a direction parallel to the drill axis. The section of reduced diameter between the shank and the body of a drill. The part of the drill by which it is held and driven. The flattened end of a taper shank intended to fit into a driving slot in a socket. The central portion of the drill that joins the land. The end of the web forms the chisel edge on a two flute drill. The minimum dimension of the web measured at the point of the drill.

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 224

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:42 PM

TECHNICAL DRILLS COUNTERSINKS

CUTTING SPEEDS (RPM) AND FEEDS FOR M2 HSS STEP DRILLS

MATERIAL TO BE CUT

FEED (MM/MIN)

4 - 12MM

STEP DRILL SIZE RANGE 4 - 20MM 6 - 30MM 1/8 - 1/2"

1/4 - 3/4"

MILD STEEL (<700 N/MM2)

20 - 25

SPEED (RPM)

1900 - 600

1900 - 400

1900 - 250

1900 - 600

1900 - 400

MILD STEEL (>700 N/MM2)

16 - 20

SPEED (RPM)

1500 - 500

1500 - 320

1500 - 250

1500 - 500

1500 - 320

ALLOY STEEL (1000 N/MM2)

10 - 16

SPEED (RPM)

1500 - 500

1500 - 320

1500 - 250

1500 - 500

1500 - 320

CAST IRON (<250 N/MM2)

12 - 25

SPEED (RPM)

1190 - 400

1190 - 240

800 - 130

1190 - 400

1190 - 240

CAST IRON (>250 N/MM2)

8 - 12

SPEED (RPM)

800 - 230

800 - 160

400 - 250

800 - 230

800 - 160

STAINLESS STEEL

5 - 12

SPEED (RPM)

500 - 300

400 - 250

500 - 300

400 - 250

AL ALLOY (<11% Si)

10 - 16

SPEED (RPM)

1990 - 550

1900 - 400

1990 - 270

1990 - 550

1900 - 400

THERMOPLASTIC

12 - 25

SPEED (RPM)

1590 - 450

1590 - 320

1590 - 210

1590 - 450

1590 - 320

WOOD

40 - 100

SPEED (RPM)

3000 - 1000

2800 - 1000

1500 - 800

3000 - 1000

2800 - 1000

CUTTING SPEEDS (RPM) AND FEEDS FOR HSS-Co5 BRIGHT FINISH COUNTERSINKS

MATERIAL TO BE CUT STEEL ≤500 N/MM2 STEEL 500–800 N/MM2 STEEL 800–1000 N/MM2 STAINLESS STEEL 1000–1300 N/MM2 STAINLESS STEEL ICONEL-NIMONIC CAST IRON ALUMINIUM BRASS - BRONZE COPPER LAMINATES PLASTICS

SMM FEED RPM FEED RPM FEED RPM FEED RPM FEED RPM FEED RPM FEED RPM FEED RPM FEED RPM FEED RPM FEED RPM

35-45 20-30 15-20 12-15

50-60

20-30

50-100

SURFACE SPEED / FEED / RPM BY COUNTERSINK DIAMETER (MM) ∅10 ∅20 ∅30 SMM ∅10 ∅20 ∅30 SMM ∅10 275 138 90 275 138 90 210 35-45 17-22 1250 625 430 1250 625 420 620 136 68 45 136 68 45 150 20-30 10-15 800 400 260 800 400 260 480 68 34 23 68 34 23 100 15-20 8-12 520 260 180 520 260 180 380 45 25 17 45 25 17 32 12-15 6-8 380 200 140 380 200 140 320 – – – – – – 15 4-6 – – – – – – 180 – – – 150 130 100 80 20-40 15-25 – – – 1200 550 430 630 400 200 150 400 200 150 375 0-60 35-45 1600 800 600 1600 800 600 1250 – – – 300 150 90 240 30-40 20-30 – – – 1200 600 370 800 200 100 65 200 100 65 – 20-30 35-70 800 400 260 800 400 260 – – – – 1600 800 250 720 50-100 – – – 3200 1600 1000 1600 1600 800 250 1600 800 250 720 500 35-70 3200 1600 1000 3200 1600 1000 1600

∅20 100 310 76 240 50 190 16 160 8 90 60 320 190 625 120 400 – – 360 800 360 800

∅30 75 210 50 160 36 130 11 110 5 65 50 210 130 430 80 260 – – 240 530 240 530

SMM – RELATIVE SURFACE SPEED IN M/MIN FEED IS SHOWN IN MM/MIN EXAMPLE If you are countersinking in Stainless Steel (1000-1300 N/mm2) using a 20mm diameter Single Flute countersink; The SMM (Relative Surface Speed in Metres per Minute) is 12-15 m/min, the Feed Rate is 25 mm/min and the Speed in RPM is 200.

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 225

WWW.BORDO.COM.AU

PAGE 225 21/04/12 6:42 PM

TECHNICAL TAPS

TAPPING DRILL TABLES

DIA. 1.00 1.20 1.40 1.60 1.80 2.00 2.50 3.00 3.50 4.00 4.50 5.00 6.00 7.00 8.00 9.00 10.00 12.00 14.00 16.00 18.00 20.00 22.00 24.00 30.00 33.00 36.00 39.00 42.00 45.00 48.00 52.00 56.00

METRIC COARSE (ISO) PITCH OAL x 0.25 38.50 x 0.25 38.50 x 0.30 40.00 x 0.35 41.00 x 0.35 41.00 x 0.40 41.00 x 0.45 44.50 x 0.50 48.00 x 0.60 50.00 x 0.70 53.00 x 0.75 53.00 x 0.80 58.00 x 1.00 66.00 x 1.00 66.00 x 1.25 72.00 x 1.25 72.00 x 1.50 80.00 x 1.75 89.00 x 2.00 95.00 x 2.00 102.00 x 2.50 112.00 x 2.50 112.00 x 2.50 118.00 x 3.00 130.00 x 3.50 138.00 x 3.50 151.00 x 4.00 162.00 x 4.00 170.00 x 4.50 170.00 x 4.50 187.00 x 5.00 187.00 x 5.00 200.00 x 5.50 200.00

DRILL 0.75 0.95 1.10 1.25 1.45 1.60 2.05 2.50 2.90 3.30 3.70 4.20 5.00 6.00 6.80 7.80 8.50 10.20 12.00 14.00 15.50 17.50 19.50 21.00 26.50 29.50 32.00 35.00 37.50 40.50 43.00 47.00 50.50

BSPF (BRITISH STANDARD PIPE G-SERIES) DIA. DRILL TPI OAL 1/8 x 28 59.00 8.80 1/4 x 19 67.00 11.80 3/8 x 19 75.00 15.25 1/2 x 14 87.00 19.00 5/8 x 14 91.00 21.00 3/4 x 14 96.00 24.50 7/8 x 14 102.00 28.25 1 x 11 109.00 30.75 1-1/4 x 11 119.00 39.50 1-1/2 x 11 125.00 45.50 1-3/4 x 11 132.00 51.00 2 x 11 140.00 57.00 2-1/4 x 11 142.00 62.70 2-1/2 x 11 153.00 72.10 3 x 11 164.00 84.80

PAGE 226

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 226

DIA. 2.00 3.00 4.00 4.50 6.00 7.00 8.00 8.00 9.00 10.00 10.00 10.00 12.00 12.00 12.00 14.00 14.00 14.00 16.00 16.00 16.00 18.00 18.00 18.00 20.00 20.00 22.00 22.00 24.00 24.00 25.00 27.00 30.00 32.00

METRIC FINE (ISO) PITCH OAL x 0.45 41.00 x 0.35 48.00 x 0.50 53.00 x 0.50 53.00 x 0.75 66.00 x 0.75 66.00 x 0.75 69.00 x 1.00 69.00 x 1.00 69.00 x 0.75 76.00 x 1.00 76.00 x 1.25 76.00 x 1.00 84.00 x 1.25 84.00 x 1.50 89.00 x 1.00 90.00 x 1.25 90.00 x 1.50 95.00 x 1.00 95.00 x 1.25 95.00 x 1.50 102.00 x 1.00 104.00 x 1.25 104.00 x 1.50 104.00 x 1.50 104.00 x 2.00 112.00 x 1.50 113.00 x 2.00 118.00 x 1.50 120.00 x 2.00 120.00 x 1.50 120.00 x 2.00 127.00 x 2.00 127.00 x 1.50 137.00

DRILL 1.55 2.65 4.00 4.00 5.20 6.20 7.20 7.00 8.00 9.20 9.00 8.80 11.00 10.80 10.50 13.00 12.80 12.50 15.00 14.75 14.50 17.00 16.80 16.50 18.50 18.00 20.50 20.00 22.50 22.00 23.50 25.00 28.00 30.50

BSPT (BRITISH STANDARD PIPE TAPER) DIA. DRILL TPI OAL 1/8 x 28 59.00 8.40 1/4 x 19 67.00 11.20 3/8 x 19 75.00 14.75 1/2 x 14 87.00 18.25 3/4 x 14 96.00 23.75 1 x 11 109.00 30.00 1-1/4 x 11 119.00 38.50 1-1/2 x 11 125.00 44.50 2 x 11 140.00 56.00

DIA. 10.00 12.00 14.00 18.00

SPARK PLUG (ISO) PITCH OAL x 1.00 76.00 x 1.25 84.00 x 1.25 90.00 x 0.50 104.00

DRILL 9.00 10.80 12.80 16.50

OVERSIZE / GALVANISING (ISO) DIA. DRILL PITCH OAL 10.00+0.4 x 1.50 80.00 8.90 12.00+0.4 x 1.75 89.00 10.60 16.00+0.4 x 2.00 102.00 14.40 20.00+0.4 x 2.50 112.00 17.90 24.00+0.4 x 3.00 130.00 21.40 OVERSIZE / GALVANISING (ISO) DIA. DRILL PITCH OAL 16.00 x 1.50 102.00 14.50 20.00 x 1.50 104.00 18.50

NPT (NATIONAL PIPE THREAD TAPERED) DIA. DRILL TPI OAL 1/8 x 27 59.00 8.70 1/4 x 18 67.00 11.10 3/8 x 18 75.00 14.50 1/2 x 14 87.00 18.00 3/4 x 14 96.00 23.25 1 x 11.5 109.00 29.00 1-1/4 x 11.5 119.00 38.00 1-1/2 x 11.5 125.00 44.00 2 x 11.5 140.00 56.00

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:42 PM

TECHNICAL TAPS

TAPPING DRILL TABLES UNC (UNIFIED NATIONAL COARSE) DIA. DRILL TPI OAL 5G x 40 48.00 2.65 6G x 32 50.00 2.85 8G x 32 53.00 3.50 10G x 24 58.00 3.90 12G x 24 62.00 4.50 3/16 x 24 UNS 58.00 3.70 1/4 x 20 66.00 5.10 5/16 x 18 72.00 6.60 3/8 x 16 80.00 8.00 7/16 x 14 85.00 9.40 1/2 x 13 89.00 10.80 9/16 x 12 95.00 12.20 5/8 x 11 102.00 13.50 3/4 x 10 112.00 16.50 7/8 x 9 118.00 19.50 1 x 8 130.00 22.25 1-1/8 x 7 138.00 25.00 1-1/4 x 7 151.00 28.00 1-1/2 x 6 170.00 34.00 1-3/4 x 5 187.00 39.50 2 x 4.5 200.00 45.00

DIA. 1/8 1/4 3/8 1/2

x x x x

NPSF (DRYSEAL) TPI OAL 27 59.00 18 67.00 18 75.00 14 87.00

NPTF (DRYSEAL TAPER) TPI OAL x 27 59.00 x 18 67.00 x 18 75.00 x 14 87.00

DRILL 8.70 11.10 14.50 18.00

DRILL 8.40 11.10 14.50 18.00

UNF (UNIFIED NATIONAL FINE) DIA. DRILL TPI OAL 4G x 48 48.00 2.40 5G x 44 48.00 2.70 6G x 40 50.00 2.95 8G x 36 53.00 3.50 10G x 32 58.00 4.10 12G x 28 62.00 4.70 3/16 x 32 UNS 58.00 4.00 1/4 x 28 66.00 5.50 5/16 x 24 69.00 6.90 3/8 x 24 76.00 8.50 7/16 x 20 82.00 9.90 1/2 x 20 84.00 11.50 9/16 x 18 90.00 12.90 5/8 x 18 95.00 14.50 3/4 x 16 104.00 17.50 7/8 x 14 113.00 20.40 1 x 12 120.00 23.25 1 x 14 UNS 120.00 23.25 1-1/8 x 12 127.00 26.50 1-1/4 x 12 137.00 29.50 1-1/2 x 12 149.00 36.00

BSW (BRITISH STANDARD WHITWORTH) DIA. DRILL TPI OAL 1/16 x 60 41.00 1.20 3/32 x 48 Whit 44.50 1.85 1/8 x 40 48.00 2.55 5/32 x 32 Whit 53.00 3.20 3/16 x 24 58.00 3.70 7/32 x 24 Whit 62.00 4.50 1/4 x 20 66.00 5.10 5/16 x 18 72.00 6.50 3/8 x 16 80.00 7.90 7/16 x 14 85.00 9.30 1/2 x 12 89.00 10.50 9/16 x 12 95.00 12.10 5/8 x 11 102.00 13.50 3/4 x 10 112.00 16.25 7/8 x 9 118.00 19.25 1 x 8 130.00 22.00 1-1/8 x 7 138.00 24.75 1-1/4 x 7 151.00 28.00 1-3/8 x 6 162.00 30.25 1-1/2 x 6 170.00 33.50 1-3/4 x 5 187.00 39.00 2 x 4.5 200.00 44.50

UNEF (UNIFIED NATIONAL EXTRA FINE) DIA. DRILL TPI OAL 1/4 x 32 66.00 5.60 5/16 x 32 69.00 7.20 3/8 x 32 76.00 8.80 1/2 x 28 84.00 11.80 5/8 x 24 95.00 14.75 3/4 x 20 104.00 18.00 1 x 20 120.00 24.20

BSF (BRITISH STANDARD FINE) DIA. DRILL TPI OAL 3/16 x 32 58.00 4.00 1/4 x 26 66.00 5.30 5/16 x 22 72.00 6.80 3/8 x 20 80.00 8.30 7/16 x 18 85.00 9.70 1/2 x 16 89.00 11.10 5/8 x 14 102.00 14.00 3/4 x 12 112.00 16.75 7/8 x 11 118.00 19.75 1 x 10 130.00 22.75

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 227

WWW.BORDO.COM.AU

PAGE 227 21/04/12 6:42 PM

TECHNICAL BURRS HOLESAWS

TUNGSTEN CARBIDE BURR SPEEDS ALL QUOTED SPEEDS X 1000 RPM BRASS, COPPER, UNHARDENED CAST IRON AND STEEL BRONZE

ALUMINIUM AND PLASTIC

HARDENED STEEL, STAINLESS STEEL NIMONIC ALLOYS

MAXIMUM OPERATING SPEED

SPEED RANGE

REC. STARTING SPEED

SPEED RANGE

REC. STARTING SPEED

SPEED RANGE

REC. STARTING SPEED

SPEED RANGE

REC. STARTING SPEED

3MM (1/8")

100

60-80

45-80

60-80

6MM (1/4")

15-60

22-60

45-60

30-45

10MM (3/8")

10-50

15-40

30-40

19-30

12MM (1/2")

7-30

11-30

22-30

15-22

16MM (5/8")

6-20

9-20

18-20

12-18

20MM (3/4")

5-17

8-17

15-17

10-15

25MM (1")

4-13

6-13

10-13

7-11

BURR HEAD DIAMETER

RECOMMENDED SPEEDS ARE BASED ON STANDARD SHANK LENGTH OF 45MM / (1-3/4”) MAX OVERHANG OF 10MM (3/8”) MAXIMUM RECOMMENDED OPERATING SPEEDS FOR EXTENDED LENGTH SHANKS IS 15,000RPM

XP AND XP2 TUNGSTEN CARBIDE CUTTER SPEEDS MATERIAL

18 – 21 MM

XP AND XP2 CUTTER DIAMETER (MM) – SPEEDS IN RPM 22 – 30 MM 32 – 40 MM 41 –50 MM 51 – 60 MM

60 – 76 MM

STEEL

700 – 1000

500 – 800

300 – 600

200 – 500

200 – 400

150 – 300

STAINLESS STEEL

300 – 700

200 – 450

175 – 315

120 – 225

95 – 195

80 – 150

TCG (TUNGSTEN CARBIDE GRIT) EDGE HOLESAW SPEEDS TCG EDGE HOLESAWS (TUNGSTEN CARBIDE GRIT) DIA. MM DIA. INCHES 16 19 3/4 20 22 7/8 25 1 29 1-1/8 32 1-1/4 35 1-3/8 38 1-1/2 44 1-3/4 48 1-7/8 51 2 54 2-1/8 57 2-1/4 60 2-3/8 64 2-1/2 70 2-3/4 76 3 83 3-1/4 86 3-3/8 95 3-3/4 102 4 114 4-1/2

PAGE 228

BRICK CERAMIC 620 510 470 430 380 340 310 280 260 220 200 190 180 170 160 150 140 130 120 115 102 95 82

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 228

ALL QUOTED SPEEDS RPM REINFORCED SLATE PLASTICS 1540 2140 1280 1790 1180 1660 1090 1530 960 1340 850 1190 770 1070 700 980 640 890 550 770 510 720 480 670 450 630 430 600 400 570 380 540 350 500 320 450 295 415 285 400 255 350 240 330 215 290

FIBRE 920 770 715 660 580 510 460 420 390 330 310 290 280 270 250 230 210 190 180 175 160 150 125

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:42 PM

TECHNICAL HOLESAWS

Vx BI-METAL HOLESAW SPEEDS Vx BI-METAL HOLESAWS (BORDO AND POWER-HEX) DIA. MM DIA. INCHES 14 9/16 16 5/8 17 11/16 19 3/4 20 21 13/16 22 7/8 24 15/16 25 1 27 1-1/16 29 1-1/8 30 1-3/16 32 1-1/4 33 1-5/16 35 1-3/8 37 1-7/16 38 1-1/2 40 1-9/16 41 1-5/8 43 1-11/16 44 1-3/4 46 1-3/16 48 1-7/8 51 2 52 2-1/16 54 2-1/8 57 2-1/4 59 2-5/16 60 2-3/8 64 2-1/2 65 2-9/16 67 2-5/8 68 70 2-3/4 73 2-7/8 76 3 79 3-1/8 83 3-1/4 86 3-3/8 89 3-1/2 92 3-5/8 95 3-3/4 98 3-7/8 102 4 104 4-1/8 108 4-1/4 111 4-3/8 114 4-1/2 121 4-3/4 127 5 140 5-1/2 146 5-3/4 152 6

MILD STEEL 580 550 500 460 440 425 390 370 350 325 300 285 275 260 250 240 230 220 210 205 195 190 180 170 165 160 150 145 140 135 130 130 130 125 120 115 110 105 100 95 90 90 90 85 80 80 80 75 75 65 60 55 55

ALL QUOTED SPEEDS RPM TOOL STEEL CAST IRON BRASS S/STEEL 300 400 790 275 365 730 250 330 665 230 300 600 220 290 580 210 280 560 195 260 520 185 245 495 175 235 470 160 215 435 150 200 400 145 190 380 140 180 360 135 175 345 125 165 330 120 160 315 115 150 300 110 145 290 105 140 280 100 135 270 95 130 260 95 125 250 90 120 240 85 115 230 80 110 220 80 105 210 75 100 200 75 95 195 70 90 190 65 85 180 65 85 175 65 85 170 65 80 175 60 80 160 60 75 160 55 70 150 55 70 140 50 65 140 50 65 130 45 60 130 45 60 120 45 60 120 45 60 120 40 55 110 40 55 110 40 55 110 40 50 100 35 50 100 35 50 92 30 45 90 25 40 85 25 35 75 25 35 75

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 229

ALUMINIUM 900 825 750 690 660 635 585 555 525 480 450 425 410 390 375 360 345 330 315 305 295 285 270 255 245 240 225 225 220 205 200 195 190 185 180 170 165 155 150 145 140 135 135 130 120 120 120 105 95 90 85 75 75

WWW.BORDO.COM.AU

PAGE 229 21/04/12 6:42 PM

TECHNICAL ANNULAR CUTTERS

ANNULAR CUTTER SPEEDS IN SURFACE METRES PER MINUTE

MATERIAL ALUMINIUM

BRASS & BRONZE CAST IRON

MALLEABLE IRON MAGNESIUM NICKEL ALLOYS STEEL - FREE MACHINING CARBON STEEL STEEL ALLOYS - SOFT

STEEL ALLOYS - MEDIUM

STEEL ALLOYS - HARD TOOL STEEL

FORGINGS ARMOUR PLATE STAINLESS STEEL - FERRITIC STAINLESS STEEL - AUSTENITIC

WROUGHT & CAST DIE CAST 360, 380 DIE CAST 383, 413 DIE CAST 390, 392 SOFT MEDIUM CHILLED FERRITIC PEARLITIC 200-230 MONEL 400-404 RESULPHURISED/LEADED 10XX, 12XX, XX10, XX20 10XX, 12XX, XX10, XX20 41XX, 51XX, XX30, XX40 52XX, 93XX, XX50, X100 10XX, 12XX, XX10, XX20 41XX, 51XX, XX30, XX40 52XX, 93XX, XX50, X100 T15, M42, D2 M2, A2 S6, H13

430/405, 430F LOWER BHN HIGHER BHN 309/316 HIGHER BHN 301/304 HIGHER BHN 303/203EZ

STAINLESS STEEL - MARTENSITIC STAINLESS STEEL - PRECIPITATION HARDENING INCONEL INCONEL INCONEL

PAGE 230

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 230

600/HASTELLOY B, C, X, S 718/WASPELLOY 700/RENE 41

ALL QUOTED SPEEDS IN SMM HARDNESS CUTTING SPEED BRINELL SURFACE METRES/MIN 30-150 150 – 300 40-125 135 – 180 40-125 135 – 180 40-125 20 – 30 90 – 180 120-150 20 – 38 160-220 15 – 30 230-300 10 – 15 110-160 30 – 40 160-220 22 – 30 50-90 120 – 240 80-170 18 – 25 115-240 10 – 15 32 – 90 125-160 27 – 34 170-210

20 – 27

220-250

17 – 23

260-300

11 – 15

210-250

11 – 18

200-250 135-185 135-185

12 – 15 12 – 17 27 – 38 17 – 23

225-275

12 – 21

135-185 185-240 150-200 140-220 200-300 225-300

21 – 38 14 – 34 14 – 17 3–5 3–4 3–4

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:43 PM

TECHNICAL REAMERS

REAMER SPEEDS AND FEEDS SPEEDS The most efficient speed for machine reaming is closely related to the type of material being reamed, the rigidity of the set up, and the tolerance or finish required. Quite often the best speed is found to approximate one half of the speed used for drilling the same material. The following table may be used for a guide for high speed steel reamers. Carbide reamers or diamond tipped reamers may be run considerably faster. When close tolerances and a fine finish are required, it is usually found necessary to finish ream at considerably slower speeds. FEEDS In reaming, feeds are usually higher than those used for drilling. The amount of feed may vary with the material, but a good starting point would be between 0.04MM (.0015” ) and 0.10MM (.004”) per flute per revolution. Too low a feed may result in glazing, excessive wear, and chatter. Too high a feed tends to reduce the accuracy of the hole and may also lower the quality of the finish. The basic idea is to use as high a feed as possible and still produce the required finish and accuracy. ALL QUOTED SPEEDS SMM

MATERIAL

REAMER TOLERANCES Bordo reamers are manufactured to produce holes to H7 tolerance. The tolerance limits in the table below are added to the nominal reamer diameter.

REAMER DIAMETER (MM) > 1.0 – 3.0 >3.0 6.0 > 6.0 – 10.0 > 10.0 – 18.0 > 18.0 – 30.0 > 30.0 – 50.0

HOLE DIAMETER TOLERANCE H7

CUTTING DIAMETER TOLERANCE MM +0.004 +0.005 +0.006 +0.008 +0.009 +0.012

MM +0.008 +0.010 +0.012 +0.015 +0.017 +0.021

MM +0.010 +0.012 +0.015 +0.018 +0.021 +0.025

SPEEDS

MAGNESIUM AND ITS ALLOYS ALUMINIUM AND ITS ALLOYS BAKELITE BRASS AND BRONZE, ORDINARY BRONZE, HIGH TENSILE MONEL METAL CAST IRON, SOFT CAST IRON, HARD CAST IRON, CHILLED MALLEABLE IRON STEEL, PLAIN CARBON BR 150 - 225 STEEL, PLAIN CARBON BR 230 - 325 STEEL, PLAIN CARBON BR 330 - 425 STEEL ALLOY BR 150 - 225 STEEL ALLOY BR 230 - 325 STEEL ALLOY BR 330 - 425 STEEL, TOOL BR 150 - 250 STEEL, TOOL BR 255 - 375 STEEL, FREE MACHINING STAINLESS STEEL, HARD STAINLESS & P.H.

50 – 82 40 – 60 21 – 30 39 – 61 15 – 21 7 – 11 21 – 30 15 – 21 6–9 15 – 18 17 – 20 12 – 15 7 – 11 4 – 20 10 – 14 6 –9 12 –15 6–9 12 –15 6–9

OVERALL LENGTH CUTTING LENGTH

RECESS

SHANK

DIAMETER

BEVEL LEAD ANGLE

TANG

SHANK LENGTH OF SQUARE

TAPER LEAD LENGTH

DIAMETER

TAPER LEAD ANGLE

SIZE OF SQUARE CIRCULAR LAND

SECTION B-B

NO CIRCULAR LAND PRIMARY CLEARANCE ANGLE

CLEARANCE ANGLE

CIRCULAR LAND CLEARANCE ANGLE

DIAMETER

SECTION A-A

FLUTE

CENTRE HOLE RADIAL FACE CUTTING EDGE

SALES@BORDO.COM.AU 18193_Bordo_BuyersGuide_082011_PJ32.indd 231

WWW.BORDO.COM.AU

PAGE 231 21/04/12 6:43 PM

RETURNS & CREDITS

CREDITS/RETURNS POLICY from page 002. 8. CREDITS/RETURNS: Except to the extent of any liability imposed by the ACL, authorisation must be obtained before returning goods for credit. No goods will be accepted for credit that are correctly supplied and invoiced if not returned freight paid within 14 days and delivery freight will be charged. Also a 15% restocking fee will be charged for any goods supplied correctly. Goods forwarded in error will be replaced no charge freight paid. Goods incorrectly sent must be held by the customer pending our further instruction.

CREDITS/RETURNS PROCEDURE RETURNED FOR WARRANTY 1. All goods returned to Bordo International MUST be accompanied by a Return Authorisation Number. Goods returned to Bordo International without an RA will not be processed. 2. All RA returns are to be delivered to Bordo International Pty Ltd 3 Kingston Park Court Scoresby Victoria 3179 Australia. 3. Cost of returning all goods under warranty including transport and insurance, is the CUSTOMER’S responsibility. 4. Goods must be properly packaged for return, goods damaged in transit will void warranty. 5. Goods returned for warranty will be repaired or replaced at Bordo International’s discretion. 6. Whilst Bordo International will endeavour to return warrantied goods to customers as quickly as possible, temporary replacement items will not be supplied. 7. A copy of the original invoice must accompany all warranty returns. 8. Goods returned with NO FAULT FOUND may be charged a minimum adminstration fee of $25.00 +GST per item.

RETURNED FOR CREDIT 1. All credit requests must be made to your account/sales representative OR to Bordo Customer Service. 2. All goods returned to Bordo International MUST be accompanied by a Return Authorisation Number. Goods returned to Bordo International without an RA will not be processed. 3. Specifically ordered non-stock items will not be accepted for credit. 4. Credit will be issued at Bordo International’s discretion and, where applicable, re-stocking fees will apply. 5. All RA returns are to be delivered to Bordo International Pty Ltd 3 Kingston Park Court Scoresby Victoria 3179 Australia. 6. Goods may be considered as eligible for credit return provided that ALL of the following criteria are met: a) a credit Return Authorisation number (RA) is obtained prior to sending the returned goods; and b) the goods are returned unopened, undamaged and in original packaging, and as such must not have additional price, warranty, freight and/or other sticker, tags or labels attached; and c) the returned goods are received by Bordo International within 14 days of receipt of goods by the customer. 7. If returned goods are deemed by Bordo International NOT to be in a re-saleable condition, credit will be denied and it will be the customer’s responsibility to arrange the collection of the goods. 8. Unless Bordo International have incorrectly shipped products, transport charges will be paid by the customer unless otherwise agreed by Bordo International in writing.

PAGE 232

BORDO INDUSTRIAL TOOLS

18193_Bordo_BuyersGuide_082011_PJ32.indd 232

TELEPHONE 03 9212 7001 FACSIMILE 03 9212 7071 21/04/12 6:43 PM

M2 â&#x20AC;&#x201C; M12 (1/8" â&#x20AC;&#x201C; 1/2") PowerCoil Thread Repair Kits include all the necessary components to sucessfully repair damaged threads. Kits include Drill, STI Tap, Inserts, Installation Tool and Tang Break-Off Tool. The PowerCoil Wire Thread Insert System includes a complete range of over 140 Thread Repair Kits; Free Running & Screw Locking inserts; Strip Feed Inserts; STI Hand & Machine Taps; Installation, Tang Break & Removal Tools.

wire thread insert system

features & benefits s ,IGHTER AND #HEAPER THAN ANY OTHER EQUIVALENT TYPE OF THREAD INSERT

s 4HEIR INTRODUCTION MAY RESULT IN THE USE OF THINNER SECTIONS OR LIGHTER PARENT MATERIALS WITHOUT SACRIFICING THREAD STRENGTH s #REATE INTERNAL THREADS WITH GREATLY IMPROVED DISTRIBUTION OF RESIDUAL STRESS LOADING

s #AN GENERALLY BE INTRODUCED INTO EXISTING DESIGNS WHERE NO PREVIOUS PROVISION HAS BEEN MADE

s #OMPENSATE FOR PITCH AND FLANK ANGLE ERRORS

s )NCREASE QUALITY AND PERFORMANCE WHILST REDUCING OVERALL PRODUCT COST

s #REATE INTERNAL THREADS IN WHICH WEAR DUE TO THREAD FRICTION IS VIRTUALLY ELIMINATED s 0ROVIDING THREADS THAT STAY TIGHT

wire thread insert system

installation instructions 1

DRILL $RILL TO CLEAR THE DAMAGED THREAD WITH A STANDARD TWIST DRILL 4HREAD 2EPAIR +ITS UP TO - INCLUDE THE CORRECT SIZE DRILL 4HE REQUIRED TAPPING DRILL SIZE IS SHOWN ON THE FRONT OF THIS PACK

Note: Spark Plug inserts utilise a pilot nose tap which does not require pre-drilling.

TAP 5SE THE SPECIFIED TAP TO CUT THE HOLDING THREAD INTO THE CLEARED HOLE 7HEN TAPPING A HOLE IT IS RECOMMENDED TO USE A SUITABLE LUBRICANT

Note: Wire Thread inserts require the use of STI taps which are slightly oversize to provide the correct hole diameter. Always check that the thread and pitch of the tap are the same as the bolt you wish to insert into the finished hole.

INSERT

Note: Do not position tang at the very top or bottom of the insert tool slot. 5SE THE INSTALLATION TOOL TO WIND THE INSERT INTO THE THREADED HOLE USING LIGHT DOWNWARD PRESSURE UNTIL HALF A TURN BELOW THE SURFACE Note: Do not work against the thread direction as the tang may break off.

SNAP ,IFT INSTALLATION TOOL ROTATE Â&#x17D; AND TAP DOWN SHARPLY TO BREAK OFF WIRE THREAD INSERT TANG 5SE THE TANG BREAK OFF TOOL TO PERFORM THIS FUNCTION WHERE SUPPLIED

,OOSEN THE GRUB SCREW AND SLIDE THE COLLAR ALONG THE INSERT TOOL SHAFT SO THAT THE X TANG ON THE INSERT IS POSITIONED HALF WAY X UP THE INSERT TOOL SLOT

Note: For spark plug and large inserts use long nose pliers to remove the tang.

DONE! 9OU HAVE SUCCESFULLY REPAIRED YOUR DAMAGED THREAD 4HE NEW THREAD IS NORMALLY STRONGER THAN THE ORIGINAL

PowerCoil military standards available: MA3279, MA3280, MA3281, NASM122076â&#x20AC;&#x201C;124850, MA3329, MA3330, MA3331 and NASM21209 0OWER#OIL IS A REGISTERED TRADEMARK OF "ORDO )NTERNATIONAL 0TY ,TD +INGSTON 0ARK #OURT 3CORESBY 6ICTORIA !USTRALIA

18193_OutsideCover_OL_noUV.pdf

23/04/12

2:56 PM