November 2024 Southeast Edition

Blend Times Now Require ‘On-the-Spot’ Determination

By John Yoswick, Autobody News

Collision repairers for decades have understood the concept of “judgement times,” having to determine while looking at the vehicle how much labor will be required to repair a particular dent in a panel, for example.

Given changes in the estimating systems in the past year, determining blend time has become another of the items requiring an “on-the-spot evaluation.”

Though the 50% of full refinish time remains the default setting for calculating blend times in the CCC Intelligent Solutions and Solera (Audatex) estimating systems, users can change that percentage, and the two companies changed their guidance to say blend times vary and require a vehicle-by-vehicle evaluation. Mitchell continues to use the 50% formula but has given users the ability to change that percentage in the system.

A committee presentation at the Collision Industry Conference (CIC) in Denver this past summer highlighted how many other collision repair labor operations there are that, like blending, require the judgement or “on-thespot evaluation” by the estimator.

Danny Gredinberg of the Database Enhancement Gateway (DEG) noted there are many notincluded labor procedures that body technicians in shops may be performing. He said the “labor general information” section of the Mitchell P-pages lists 17 bodylabor-related items that would be additions to its published times, including broken glass clean-up and tar and grease removal.

“It should not be inferred that a component with no established labor time has been included in another component’s replacement allowance,” the Mitchell P-pages state.

The Motor Information Guide to Estimating — the basis for the CCC estimating system — lists 43 not-included items in the body section alone, including “road test vehicle” and “anti-corrosion material restoration/application.”

The Solera (Audatex) database reference manual lists 61 bodyrelated “labor exclusions,” including “assembly of new parts that come unassembled,” and “disassembly of recycled parts and assemblies.”

“So there’s many different things you may need to consider in the repair process as an ‘on-the-spot’

10 Veterans Graduate from Caliber Training Program At North Carolina School

Caliber Collision’s Changing Lanes program, which helps military members transition to a job in civilian life, recently celebrated 10 new graduates at Fayetteville Technical Community College in Fayetteville, NC. The comprehensive 15-week auto body technician training program equips participants with the necessary skills to thrive in various auto repair specialties.

The course, designed by Caliber

Jim Hudson Automotive Group Acquires Scott Will Toyota in South Carolina

The Jim Hudson Automotive Group has acquired Scott Will Toyota, a topperforming dealership in Sumter, SC, from Scott Will

The transaction, finalized Sept. 5, was facilitated by Ozog Consulting Group (OCG), serving as the exclusive sell-side advisor, which also announced the sale.

The dealership is now known as Jim Hudson Toyota Sumter.

“With the completion of this transaction, the Hudson organization is proud to add one

of the finest Toyota dealerships in the state,” said Jim Hudson, founder and CEO of the Jim Hudson Automotive Group.

“Scott’s enthusiasm for the car business, his exemplary leadership and empathy for his employees and customers, are apparent at every level of the dealership,” added Keith Hudson, president of the Jim Hudson Automotive Group.

“Scott Will Toyota is known for its customer-focused and professional

Danny Gredinberg said there are dozens of operations shops perform that have no set labor time in the estimating systems.

See it at our booth #31017 upstairs, South Hall

The liner reimagined.

When used with SATA spray guns, there is no need for an adapter.

Particle free premium strainers that click into the lid before painting. Lids offer a quadruple bayonet safety system

Hard cup, liner and lid are made with high quality materials.

Complete and detailed scale system with an upside-down scale

LCS: .40 liter, .65 liter, .85 liter

Exclusives

Mike Anderson Shops’ Needs from OEM Parts Wholesalers Go Beyond Prices, Discounts 6

Abby Andrews

Connecting Vehicles Could Be Useful in Collision Repair 28

Negotiate with Insurance Companies to Get Compensated for Proper Repairs 12

Using DRPs to Fuel Your Collision Repair Shop’s Growth 7

Brian Bradley Analysts: Fed Rate Cut Could Drive Brownfield Acquisitions in Collision Repair 26

Elizabeth Crumbly

Mitchell Donates $1.5M in Tech to Boost Collision Engineering Program 44

Why MSOs are Stepping Up to Purchase Dealership Collision Centers 36

3D Printing Offers Collision Repair Innovative Option for Parts, Shipping, Design 38

Paul Hughes Arkansas MSO Owners Find Out How Much Work Goes into Selling to Consolidator 42

Should Independent Body Shops Care About Growing State-Level Push for

REGIONAL NEWS

10 Veterans Graduate from Caliber Training Program at North Carolina School 1

CCA Reschedules Quarterly Meeting to Nov. 14 45

Jim Hudson Automotive Group Acquires Scott Will Toyota in South Carolina 1

Joe Hudson’s Collision Center Expands to West Virginia 47

NATIONAL NEWS

Alerts Cause Most ADAS-Related Complaints from New Vehicle Owners 17

ASE Education Foundation Encourages Mentorships 44

asTech Names New additions to leadership team 47

BendPak Bringing Eight-Armed Car Lift to SEMA 32

Can’t-Miss Tools to Check Out at 2024 SEMA Show 34

Crash Champions Launches Campaign Awareness 14

Consumer Privacy? 30

Stacey Phillips Ronak

3M Skills Development Center Celebrates First Anniversary of Educating, Upskilling Technicians 11

Auto Additive on Track to Provide HighQuality, OEM-Grade 3D-Printed Parts, Tools & Jigs 40

Lucid Hosts First Certified Body Repair Network Conference 4

Leona Scott

Exclusive Look: 2024 MSO Symposium Agenda Offers Critical Insights for Collision Industry Leaders 16

Jorge Sandoval Goes from Selling Cheese to 2024 Auto Glass Technician Olympics Champ 8

How Body Shops Can Navigate the Challenges of EV Collision Repairs 20 John Yoswick Blend Times Now Require ‘On-the-Spot’ Determination 1 Collision Shops, Vendors Can Help Counter Grim Entry-Level Tech

Index of Advertisers

Joe Hudson’s Expands Southeast Presence with Acquisitions in Georgia, MS 32 Quality Collision Group Acquires Triangle Collision in Raleigh, NC 43 Toyota Awards $5.8 Million to Enhance STEM Education in MS 14

Wins 3

Stellantis Files Several Lawsuits Against UAW Over Strike Threats 10

Launches ‘Pay it Forward’ Campaign 9

Lucid Hosts First Certified Body Repair Network Conference

By Stacey Phillips Ronak Autobody News

In early June, Lucid Motors held its first Certified Body Repair Network conference in Scottsdale, AZ. Certified facility owners from across the country had an opportunity to meet Lucid team members, network with shops and tour the Advanced Manufacturing Plant-1 (Amp-1) in Case Grande, AZ, located between Phoenix and Tucson.

“As the industry’s leading electric vehicle (EV) in regard to range and charging, we have to be a leader in the collision space and have a presence,” said Jake Rodenroth, Lucid’s senior manager of the North American Body Repair Program.

“The future of Lucid is very bright. The scale of the operation and the wonderful people committed to its cause is truly impressive.”

many of their names but hadn’t met the people and were able to interact with them.”

Mike Anderson, owner of Collision Advice, also shared tips on providing excellent customer service.

“Collision repairers have to be doing more than just good work,” stressed Rodenroth. “That’s the expectation. We’re trying to coach to customer service.”

Rodenroth and Andy MacDonald, director of technical operations at Lucid, shared their appreciation for Anderson presenting and inspiring the people in the room.

Following the presentations, attendees toured the 3.85-millionsquare-foot AMP-1, one of two manufacturing facilities in Casa Grande.

“The tour was really a treat because they’ve only recently opened the factory to the general public,” said Rodenroth.

During the event, attendees met the people involved at Lucid on a day-to-day basis and heard from the various departments, including body, technical training, parts and paint.

For two years, monthly calls have been held with the network to exchange information. Following an in-person meeting during the 2023 SEMA Show in Las Vegas, NV, Lucid decided to plan a formal meeting in June 2024 with certified shops.

Rodenroth said it was a great opportunity to talk to shop owners one-on-one.

“It’s good to feel their handshake and see their smile, especially some of the new shops that I haven’t had a lot of interaction with and have only talked to on the phone,” he said. “You have a deeper connection when you get to know people personally.”

During the event, attendees met the people involved at Lucid on a day-to-day basis and heard from the various departments, including body, technical training, parts and paint.

“There are so many people who make our program successful and we wanted to highlight them,” said Rodenroth. “The shops recognize

17 minutes.

The Air has received numerous awards and accolades, including the following this year: the Top Gear Electric Award for 2024 Best Luxury EV, U.S. News and World Report’s 2024 Best Luxury Electric Car, and Car and Driver’s 2024 10 Best List.

The company has also announced it will be selling the Gravity SUV with a projected range of up to 440 miles, depending on trim level.

program’s specific requirements in the regional market that they operate in,” said MacDonald. “Collision repair experience in structural aluminum and EV repair is preferential and a proven track record in delivering best-in-class customer service is mandatory.”

“We aspire to be the best certified network a shop can be on,” said Rodenroth. “It’s not easy to get on the program or stay on it.”

After evaluating more than 60 sites in 13 states for the Lucid Motors Factory, a 500-acre site in Casa Grande was chosen.

“Casa Grande offered close proximity to critical utilities, an established transportation systems and strong support from state and local government,” said MacDonald. “The facility is the first purpose-built EV factory in North America.”

Company Background

Based in Newark, CA, MacDonald said Lucid’s mission is to inspire the adoption of sustainable energy by creating advanced technologies and the most captivating luxury EVs centered around the human experience.

“Our commitment to efficiency has created one of the fastestcharging, longest range and most efficient EVs,” noted MacDonald. “By using fewer batteries and less grid electricity, we’ve reduced the demand for critical materials and their environmental impact.”

Introduced in 2021, the Lucid Air sedan is among the fastest-charging EVs on the market. The model has four trim levels: The Pure with 430 hp and 410-mile range, the Touring with 620 hp and 411-mile range, the Grand Touring with 819 hp and 516-mile range, and the Sapphire with 1,234 hp and 427-mile range. Depending on trim level, the vehicle charges up to 200 miles in about 12-

Lucid vehicles can be purchased over the Internet and at Lucid Studios in states where the auto manufacturer is licensed to conduct sales. The company provides services to customers through Lucid Service Centers and mobile service operations.

Lucid Certified Body Repair Network

Entry into the Lucid Body Repair Program is by invitation from Lucid and subject to being committed to certain requirements. These include a rigorous business evaluation, sending technicians to extensive hands-on body repair and mechanical training program courses, meeting all body and mechanical repair tooling and equipment requirements and performing to Lucid Body Repair Program operating standards requirements.

“Lucid carefully vets any candidate body repair centers to ensure that they are the best fit for meeting our customers’ needs and can meet our

He said shops must have the required equipment, restricted parts and hands-on training to repair vehicles properly.

Rodenroth encourages collision repairer facilities to access Lucid’s online landing page, fill out the form and learn more about the program.

“We’ve had some good shops that have reached out to us, but they’re located in a populated market where we already have certified shops and that wouldn’t be fair to them,” he noted.

The goal is to keep certified shops busy.

“We want to have that same respect for every shop we onboard,” said Rodenroth.

He said certification is like a badge of honor.

“It’s not a membership. It’s a certification,” Rodenroth emphasized. “Companies like ours aspire to change how people drive and own cars. Our network aspires to change how the industry repairs cars and interact with owners.”

To learn more, visit techinfo. lucidmotors.com/landing

The Lucid Air sedan has received numerous awards and accolades.

Certified facility owners had an opportunity to meet Lucid team members, network and tour the Advanced Manufacturing Plant-1 (Amp-1) in Case Grande, AZ.

Mike Anderson — From the Desk of Mike Anderson

Shops’ Needs from OEM Parts Wholesalers Go Beyond Prices, Discounts

As I mentioned in a previous column, I’ve conducted more than a dozen meetings bringing together collision repairers with regional wholesale parts managers and other OEM representatives for an automaker. The key goal of this effort, for me, is to help both sides of the parts purchase transaction a better understand each other’s perspective, and to share information with one another that would give all of the participants a clearer understanding of how the parts processes work between the various stakeholders.

Over a number of columns, I’m trying to share the things I saw and heard at those meetings that clearly surprised some of the participants or opened their eyes to seeing something in a way they hadn’t previously. In particular, I realized the voice of the wholesale parts distributor is often missing in industry discussions, so that’s something I’m working to add to the mix.

Since my first column on this was published, I’ve received a lot of calls and emails from wholesale parts vendors providing me some additional insights.

But this column focuses on collision repairers, and what they said loud and clear about what they are looking for in a best-in-class OEM wholesale parts vendor. Some readers might be surprised — as some of the participants at these meetings were — that while things like “price” and “discount” might be on shops’ list of what they’re looking for, it’s not necessarily at the top of the list.

For example, I posed this scenario to shop representatives attending the meetings, making sure they knew I wanted them to answer truthfully, not just what they thought I wanted hear. Imagine you had a car you are repairing as part of a direct repair claim for Insurer A. Your parts wholesale dealer doesn’t have the part but could get it from another dealership – but they can’t do so and give you the same discount they do on parts generally.

“Nine times out of 10, I’d still buy it,” a shop manager at a meeting in Arizona said, echoing what I heard over and over again from shops at these meetings. “I need it fast, regardless of money.”

I see a lot of parts wholesalers not wanting to get the part from another dealership because they

can’t do so and honor the discount they offer that shop. But I’m telling you, parts departments need to have a conversation with their shop

He called the shop and said, “You told me this part was on backorder, but this other dealership says they have it.”

customers, because at the end of the day, cycle time often trumps discount. They may be very willing to make less on a part if they can get it fast.

For instance, under some DRP agreements, if a shop doesn’t meet cycle time and customer satisfaction metrics, it has to give the insurer a designated percentage rebate over a specific period of time. So a single long delay, even for a single part, could skew the shop’s average — even if they hit the cycle time requirement for every other vehicle — and cost a significant amount of money.

That’s why getting a part quickly might matter more to shops than discount. This is true for non-DRP shops just as much as DRP shops.

This highlights another item at the top of most shops’ list for what they want from a parts wholesaler: honest and accurate communication about parts availability. Based on what a shop is told about parts availability, they are making decisions about which vehicles to bring in for repairs and when, which vehicles to disassemble and completion dates they can promise to customers.

If a parts vendor gives them bad information and they make a decision on that, it could possibly cost them tens of thousands of dollars.

An experience I heard about involving a dealership body shop also highlights the need for good communication between shops and wholesale parts vendors.

I was in a dealership body shop in Florida that had recently told a customer a part for their vehicle was on backorder. But that vehicle owner found the part at another dealership.

The dealership body shop called that other dealership, but that dealership wouldn’t sell them the part. That’s a hard conversation to have with a customer. They don’t understand why the shop can’t get that part from another dealership.

That hurts the OEM brand, and it makes the body shop look bad. Dealerships need to learn to play nice in the sandbox together. They need to help each other.

Here’s another point about that: If there’s added costs to a wholesale dealer getting that part from another dealer — the time and money involved in physically going to pick that part up, for example — talk to the shop customer about that. They may be willing to pay a delivery fee added to the invoice for that. Again, it comes down to good communication.

Shops also want accurate information about parts pricing. Again, under some DRP agreements, shops get dinged by insurers for supplements based on parts price increases. Again, good communication is often every bit as important to shops as discounts. Look for more key takeaways about the relationship between shops and wholesale parts vendors in my next column.

Using DRPs To Fuel Your Collision Repair Shop’s Growth

By Abby Andrews Autobody News

G&C Auto Body was founded in Santa Rosa, CA, in 1972 by Gene Crozat and Leo Gassell. Two satellite locations were opened in the 1990s. When the business was handed down to Crozat’s children, they decided to ramp up the growth. It now has 42 locations in 14 counties in Northern California.

Patrick Crozat, Gene’s son and the current COO of G&C Auto Body, appeared on The Collision Vision podcast, hosted by Cole Strandberg and driven by Autobody News, as part of its “Insurance Talk: Navigating Insurance and Repairs” series, to talk about how Direct Repair Program (DRP) agreements with insurance companies have fueled his family business’ explosive growth.

What is a DRP?

Crozat said DRPs have been a part of the collision repair industry since he got into it 22 years ago.

He described them as “contractual agreements where in turn for referrals from that insurance partner, you’re going to make concessions where you’re going to look out for the cost of the bill for them, and provide customer service.”

He said DRPs are valuable to insurance companies because they help foster a relationship with a body shop, which is the “face” of the repair process for the customer, while giving the insurance company some control over the customer’s experience.

“To ease the process between the claim and the body shop and the insurance company, I see a lot of benefits to the programs,” Crozat said.

DRPs have been “crucial” to G&C Auto Body’s growth, Crozat said. “I think it would be very, very hard for any body shop owner to grow to multiple locations without DRP relationships. I think it’s always been that way,” he added.

It’s difficult to run multiple stores in the same niche, Crozat said, whether it’s going after luxury brands or referrals from a local dealership.

Crozat said his dad was always an advocate for DRPs. “He wanted it to be a symbiotic relationship between the body shop and the insurance company, and that we’re both working towards taking care of our customer,” he said.

Pros and Cons of DRPs

DRPs require a lot more administrative paperwork, and usually include a

discount on the shop’s stated labor rate.

“You are focusing on pleasing a second customer in a way,” Crozat said, referring to the insurance company.

There are often multiple body shops in an area with the same DRP, leading to competition for the insurance company’s referrals.

“I love competition. I think competition is always needed and it drives businesses to excellence,” Crozat said. “If someone owns the market and they don’t have to work hard for it, they don’t have to try and earn it every day. Human nature. I think people will get very complacent and they wouldn’t give the best job that they could do.”

What Does a DRP Relationship Look Like?

Most of G&C’s DRP partners like to have sit-down meetings with management at least twice a year to review the business, Crozat said. A large MSO like G&C Auto Body then disseminates any information to all of its locations.

G&C has a DRP account manager, who has nine employees under them, each with a specialization. The company has a training website with every DRP’s individual processes, to serve as a reference for employees, and holds monthly training sessions on each DRP for any new hires or anyone who needs a refresher.

Strandberg asked what advice Crozat could give owners of smaller companies looking to build infrastructure like that.

“It all starts with one step,” Crozat said. “It can be overwhelming to look at the big picture.”

certified facilities, it is restricting other repairers from being able to get parts for those manufacturers. Crozat said that led G&C Auto Body to get Tesla certifications at 11 locations, since there are so many Teslas in the MSO’s California markets.

He said when going after an OEM’s certification, form strong relationships with the local dealerships who the vehicles for repair. But it is also key to advertise OEM certifications directly to consumers, in the event of personnel changes at the dealership.

Measuring Your Shop’s DRP Success

G&C Auto Body updates a “scorecard” weekly showing each shop’s performance in the metrics important to each DRP agreement at that shop.

Technology has made it easier to track shops’ KPIs and other metrics, meaning insurance companies now make referrals based on performance. “That’s what’s going to drive profitability for the insurance company, and that’s going to drive better CSI and lower rental days,” he said.

That has helped G&C Auto Body excel, Crozat said, as it performs well in terms of cycle time and CSI, so insurance companies want to establish a DRP at any shop the company opens.

Strandberg asked if G&C’s DRPs are leading to it being pulled into some of the markets it is growing into

Crozat said there have been instances of an insurance company asking about G&C’s growth plans, and then encouraging entry into a particular market.

“In those conversations they’ll be like, ‘Hey, you know what? We could really use a shop in that area. So let’s start looking at it,’” he said.

Crozat said his company prefers to open locations within a certain distance of each other, to support each other and build out markets. Insurance companies can provide data on how many competitor shops already exist in a set radius.

“It would have been really scary back in the day to do something like that, if you didn’t know if you could get the insurance companies and have that business,” Crozat said.

Crozat’s wife, Tara Crozat, joined G&C Auto Body as a customer support representative. She was then promoted to a clerical lead and then a writer. Now she manages the service writer program, which includes building SOPs and maintaining the training website. She also implemented a training program for new hires interested in becoming estimators.

“She was the most thorough, detailed writer,” Crozat said. “I would look internally at who is a writer in your organization that is on top of everything — very detail-oriented, process-driven and organized.”

The Future of DRPs vs. OEM Certifications

Crozat said he thinks DRP agreements will largely remain the same, but maybe with some tweaks.

“I don’t think I’ve seen too much evolution with insurance partner relationships over the years,” he said.

G&C Auto Body has at least six DRPs per facility; some longerserving locations have up to 13.

“We’ve always been an advocate of having every DRP that we can get in our locations, so that we’re not hoping that all of our business comes from one insurance company all the time,” Crozat said. “I would recommend going towards having more DRP partners and growing your business to be able to meet all their needs.”

As more OEMs demand their vehicles are repaired only at

If a store isn’t hitting certain metrics, its estimates are reviewed centrally until they meet the standard, Crozat said.

“It’s continuous coaching until people understand the program and how to win with that insurance contract,” he said.

Overcoming Challenges with DRPs There have been instances where an insurance company hasn’t wanted to pay for a part of the repair process.

“You’re not always going to get what you want with an insurance partner. And that’s what is — it’s a partnership, and a partnership is everyone gives and takes,” Crozat said.

He recommended maintaining good communication with DRP partners, as it increases the likelihood they’ll work with a shop if a part of the agreement is harming their business.

“Be open and honest and share the numbers with them,” Crozat said. “Maybe they’ll make a concession with you and work with you on it.” Crozat also recommended talking to them regularly about how the shop can “be a better partner” for the insurance company.

“How am I doing currently? Where could I improve? How can I earn more of your business? And how can I grow with you? See if you can chart that path with the insurance partner,” Crozat said.

“If that path isn’t there, go looking to add maybe more insurance partners, where then you have enough business to be able to open a second location, or to take the building over next door down the street,” he added.

G&C Auto Body’s flagship location in Santa Rosa, CA.

Jorge Sandoval Goes from Selling Cheese To 2024 Auto Glass Technician Olympics Champ

By Leona Scott Autobody News

Meet Jorge Sandoval, winner of the Auto Glass Technician Olympics (AGTO) Competition. AGTO is the Olympics of the automotive glass industry, a premier international competition designed to honor the technicians who complete the best auto glass installations.

The 2024 event occurred during Auto Glass Week, held Sept. 1921 in Orlando, FL. After three previous tries, Sandoval beat 28 competitors to come out on top in 2024. His journey to victory is anything but conventional. His story is one of resilience, hard work and a commitment to excellence and quality craftsmanship.

Sandoval owns KD Auto Glass in Moreno Valley, CA, and is an instructor for Kaizen Glass Solutions. He has spent more than two decades perfecting his skills in the auto glass industry.

From Humble Beginnings to Business Ownership

Sandoval’s story began in 1999 when he moved to the U.S. However, he

got fired from his sales position in 2012 and, from there, went full-time into auto glass work. He landed in the auto glass field almost by chance.

more on profit than quality.

“I knew then that I wanted to be known for doing the job right and hold myself to higher standards than just chasing money,” he said.

After honing his skills and gaining experience, Sandoval started his own business, KD Auto Glass, in 2018. The business is named after his 10-year-old son, Diego, affectionately known as “King Diego.”

Before establishing KD Auto, Sandoval operated under various names but finally decided to put down roots and build a brand that stood for quality and reliability. “There is a right way to do this job; I wanted my business to reflect that.”

A Champion’s Training Ground

Virginia, I got fourth place. Finally, this time in Orlando, I won first place,” he said. He said preparation was key to his success. Guided by a former champion and backed by sponsors like Shauna Davis of Kaizen Glass Solutions and DuPont Rep Jaime Mendoza, Sandoval spent an intense month of rigorous study, familiarizing himself with every detail of the Auto Glass Replacement Safety Standards (AGRSS).

“I met a guy doing auto glass work, and we’d replace two to three windshields a day,” Sandoval recalled. It wasn’t long before he realized most people in the field focused

Sandoval’s journey to victory at the Auto Glass Technician Competition wasn’t without its challenges.

“It’s my fourth time competing. The first time, I got second place. The second time, I got third. In West

The competition is grueling, requiring competitors to complete complex procedures in a limited time while maintaining high quality and customer service.

The fourth time was a charm for Jorge Sandoval as he became the 2024 Auto Glass Technician Olympic Champion. Jorge Sandoval.

Mastering

the Competition: Focus

and Precision

The Auto Glass Technician Competition tests both technical skills and customer service. Competitors must complete windshield replacements and recalibrations while proctors act as mock customers, posing questions and evaluating responses.

“You have one hour and 20 minutes to do everything,” Sandoval said. “You must log your information and pay attention to time, temperature, humidity and paperwork. You have to answer the proctor’s questions and be friendly, all while staying focused on the task at hand.”

There were 29 competitors this year, and the elimination process lasted for two days. Based on technical execution and knowledge points, the field was narrowed down to four finalists who competed on the final day.

Looking Ahead: Business and Beyond

Winning the competition not only brought Sandoval the $10,000 prize money, which he plans to use for a family vacation, but it also cemented his status as a leader in the industry. KD Auto Glass continues to grow, offering replacement and recalibration services that cater to the increasingly complex needs of modern vehicles.

“The industry is changing rapidly, especially with ADAS. Customers want to go to shops that can do it all, and that’s what we aim to provide,” said Sandoval.

Sandoval advises those aspiring to reach similar heights: “If you really want to win, you have to study the rules and commit to constant improvement. It’s not just about the work you do — it’s about doing it the right way.”

WIN Launches ‘Pay It Forward’ Campaign

The Women’s Industry Network (WIN) has reintroduced its successful Pay It Forward campaign, providing an impactful platform for advancing women at various career stages within the collision repair industry. Through the generosity of members and industry sponsors, WIN is extending a limited number of complimentary one-year memberships to those new to or currently unaffiliated with the industry.

This initiative is designed to bolster the network’s commitment to nurturing female talent in a predominantly male industry by facilitating access to education, mentoring and leadership development opportunities.

Participants in the Pay It Forward campaign can either directly nominate someone to receive a membership or contribute to the “WIN Pick” fund, which allows the organization to allocate memberships.

For more information, visit thewomensindustrynetwork.siteym.com/page/Payitforward.

Collision, provides training in a wide array of technical skills, including safety protocols, tool identification, vehicle disassembly and reassembly, plastic welding and repair, glass replacement and metal welding and repair. This training ensures participants are well-prepared to meet the demands of the civilian workforce in the auto repair industry. Among the successful graduates in Fayetteville Tech’s 57th cohort, five have embarked on a career trajectory on the Caliber Collision Technician track, two have joined the Protech Calibration track, and three have pioneered the new Caliber Auto Glass track.

According to Fayetteville Tech, the partnership and training program significantly enhance the employment prospects for veterans, providing them with highly soughtafter skills in a growing industry.

SUBSCRIBE TO OUR YOUTUBE CHANNEL

Autobody News

Jim Hudson Automotive

employee culture, essential values we share at the Hudson Organization. We welcome Scott Will Toyota employees to the Hudson family, and are grateful for their hard work and talent, and for the Hudson team, in the successful completion of this transaction,” said Hudson.

Jim, Keith and Ken Hudson, and the entire Hudson organization. I look forward to seeing the continued growth of the Toyota brand and additional opportunities for all our talented associates.”

“We are always grateful when a client chooses OCG to assist, guide and advise with their portfolio activities,” said Joe Ozog, president of OCG. “Scott was one of our most treasured clients to represent.”

“As I was evaluating my options with Joe and David, it became clear it was the best time for me to explore other opportunities,” said Will. “I am tremendously proud of the business and reputation we built at Scott Will Toyota. This certainly was not an easy decision, but the team at Ozog made it a smooth transaction. I congratulate

Fred Davenport of Murchison, Taylor & Gibson served as legal counsel and Heather Mueller of PBMares served as the transaction accounting firm to Scott Will Toyota. Skip Hardin Jr. of The McKay Firm served as legal counsel to the Jim Hudson Automotive Group.

Stellantis Files Several Lawsuits Against UAW Over Strike Threats

Stellantis, the parent company of Chrysler, filed eight lawsuits Oct. 7 against the United Auto Workers (UAW) and 23 local units, accusing the union of breaching their contract by threatening to strike due to the automaker’s postponed investments.

The lawsuits were filed in Michigan, Ohio, Indiana, Texas, Arizona, Massachusetts and Oregon.

The lawsuits joined a similar one Stellantis filed Oct. 3 against the UAW and its Local 230 in Los Angeles after the union members at the Los Angeles parts distribution center voted for strike authorization. This vote was in response to grievances over Stellantis’s faltering on promised investments.

The union has argued Stellantis is violating the terms agreed upon last fall, which included significant financial commitments to

various facilities, including a $1.5 billion pledge to revamp the shuttered Belvidere, IL, assembly plant for new midsize truck production by 2027.

The UAW’s proposed reinstatement of the Jobs Bank — a concept that prohibits layoffs but was a factor in the automaker’s 2009 bankruptcy — was rejected by Stellantis during a meeting Oct. 5. Stellantis argued that such measures could jeopardize the company’s future.

In July, the Energy Department announced plans to award Stellantis $334.8 million to convert the Belvidere Assembly plant to build electric vehicles (EVs), though this award is yet to be finalized. This comes amid Stellantis’s contention that their investment plans, including those for EVs, are always subject to market conditions, which have recently shown a slowdown in demand for EVs.

3M Skills Development Center Celebrates First Anniversary of Educating, Upskilling Technicians

By Stacey Phillips Ronak Autobody News

Just over a year ago, the 3M Skills Development Center opened its doors in St. Paul, MN, to help educate and upskill the collision repair industry. Since the first class was held in June 2023, more than 55 events

3M is finding the classes are also attracting people from outside collision repair facilities. For example, students from different military bases have been interested in attending the courses.

“We’re fixing cars and they’re fixing planes, automobiles and tanks,” said Spah. “You might be next to

have taken place with more than 1,100 attendees from all experience levels. They include technicians, CEOs and managers, OEM partners, distributors, performance groups and the military.

Adam Spah , application engineering manager at 3M, said the 15,000-square-foot 3M Skills Development Center has been a source of training for students from across the country in 42 U.S. states, as well as Canada, with 80% of attendees from outside Minnesota and the surrounding states.

“It has been an exciting journey over the last 12 months,” said Spah. “The industry is very busy, but proactive business owners and shop managers are realizing the importance of investing in training technicians to increase the quality of work they put in each day, even though it’s a challenge to send a technician away for three or four days.”

The backbone of the Skills Development Center is multi-day hands-on training that focuses on the most updated body repair and paint preparation and refinishing methods. The body repair and paint classes are each held one week a month and offered to anyone who has an interest in taking them, whether that’s a college student, someone working out of their garage or technicians who have been part of the industry for just a few months or more than 30 years.

“We’re really focused on getting people through the classes to help upskill the industry,” said Spah.

around knowledge, skills and abilities so students learn what they need to repair vehicles properly. Within the open enrollment courses, 3M focuses on being product agnostic, hands-on, OEM-aligned and process-oriented.

“You would think that coming into a 3M facility, you’re just going to learn about 3M products, but we keep it very product agnostic, so you could potentially use various brands during the classes,” Spah explained.

With much of the industry training being conducted virtually during the pandemic, 3M has put a high emphasis on 90% of the learning at the facility being hands-on. Rather than looking at a screen and flipping through slides, Spah said students are doing the activities they are taught.

depending on that OEM,” said Spah. “There is also a focus on the science of ‘why’ something is done so students will retain the skills taught.”

Technicians learn the proper OEMapproved techniques for squeeze type welding on various components of a repair.

a bodyman or painter in the class, but we’ll also have somebody from a military base in that same class learning together.”

When training classes aren’t being held, the center typically plans meetings and events with industry organizations, OEMs, vocational technical instructors, collision performance groups, MSOs, distributors and several others.

The Collision Repair Education Foundation (CREF) has brought in students to get a glimpse of the industry and encourage interest in working on vehicles.

“We explain to them that they can make really good money — even six figures — in this industry and have a good career,” said Spah. “Their eyes light up and they get excited.”

The 3M Skills Development Center works closely with OEMs to share information about what is taking place at the facility. Several auto manufacturers have visited over the past year.

“They want to learn what we’re teaching and how they can leverage our high level of education for their technician certification programs,” noted Spah. “We tell them how we dive deep into OEM repair manuals and find that it excites OEMs to know technicians are following the procedures.”

Since opening the center, Spah said there has been a solid increase in demand for open enrollment classes and site visits, which he predicts will continue to accelerate in 2024.

Training classes are centered

“Getting somebody out of their element and focusing on what they’re learning goes a long way,” he explained. “They are more likely to learn and retain the skills as well as the proper technique by doing the repair activities on a physical piece.”

To support the goal of handson training, the facility was built with a flexible layout that can be adjusted to fit the needs of those in attendance. In addition to a traditional classroom space, there is a hands-on work environment that features stations with electrical and air service. A 36-foot GFS XL paint booth is set up with three-stage filtration, which can accommodate 16 painters. There is also a dedicated welding area with stations equipped with fume extraction hoods.

Spah noted only about 40% of technicians look at repair manuals or procedures when they fix vehicles. As a result, 3M educators spend time teaching where to find the OEM procedures and how to fix a vehicle to its pre-collision condition.

“Trainers explain the standard operating procedures (SOPs) to follow to ensure the procedure is done the same way every time,

3M’s trainers are technical engineers with a strong collision repair background. Their backgrounds range from 20-40 years of collision experience, and include I-CAR certified instructors, paint company technical experts, and those with insurance experience. Some have authored several technical articles.

“We know vehicles are becoming more complex so we work closely with trainers to ensure the training is relevant to the cars being repaired,” said Spah.

The training programs complement those available through the online 3M Collision Repair Academy, the 3M Collision YouTube channel and virtual I-CAR Alliance training. In addition, live webinars are held at the facility where students can participate in a real-time Q&A.

Spah said they have noticed an uptick in skills as technicians leave and they’re becoming more efficient.

“They are reporting getting more repair orders through after going through our sessions,” he added.

After a course is completed, 3M asks for feedback from students to continually improve the program.

“The feedback we’ve had with the classes so far has been incredibly positive,” said Spah.

3M also welcomes feedback from the industry to ensure timely and relevant courses are offered. Looking ahead, potential classes include welding certification, front office training and repair planning. Spah said 3M is currently working toward a new curriculum with a new course set to debut soon. Look for new classes in early 2025.

For more information about courses offered through the 3M Skills Development Center, visit www.3M.com.

With a 36-oot spray booth, up to 16 painters apply various coatings.

Technicians go through the proper procedures for paint correction.

Negotiate With Insurance Companies To Get Compensated For Proper Repairs

By Abby Andrews Autobody News

For collision repair shops, working with insurance companies on claims can be contentious and stressful.

Billy Walkowiak is the founder and president of Collision Safety Consultants, a team of independent appraisers specializing in vehicle diminished value, total loss assessments and pre-purchase and post-collision repair inspections.

He joined The Collision Vision podcast, hosted by Cole Strandberg and driven by Autobody News, to talk about how to negotiate with insurance companies, using the right to appraisal clause, the importance of documentation and ensuring shops do right by the consumer.

Common Challenges in Dealing with Insurance Companies

“I would say the No. 1 issue is ignorance,” Walkowiak said. “Ignorance on the part of the consumer, ignorance on the part of the adjuster. And believe it or not, ignorance on the shop.”

Educating all parties is important. “It seems like no one understands exactly what’s going on unless they’ve had some type of class,” he said.

Walkowiak said he has met shop owners who don’t know the difference between a first-party and third-party claim and how that affects the customer’s rights.

“A first-party claim is when you’re dealing with your own insurance company, who has a contractual obligation to work on your behalf,” Walkowiak said. “They have to be fair and equitable. If they’re not, that opens them up to unfair and deceptive trade practices, bad faith claims, etc.”

A third-party claim, on the other hand, is when the customer’s vehicle is damaged by another person, whose insurance company handles the claim. In that case, the insurance company is trying to protect its own customer by minimizing the amount the insurer has to pay.

“When you try and fight a thirdparty carrier, you’re beating your head against a wall and all you’re going to get is a headache,” Walkowiak said.

“I have to explain that to consumers and shops every day, all day long,” he said. “The reason you pay insurance is to be protected. You don’t pay insurance to pay someone else off.”

Walkowiak said collision repair

associations are doing a better job of educating its shop members on topics like contract law. Repair Appraisal Clause Appraisal clauses — which are not included in every policy — allow a customer to challenge their insurance company on repair costs. Walkowiak said that benefits not only the customer, but the shop as well.

If an insurer writes an estimate of $10,000, but the shop says it will cost $15,000, the shop has to ask for the remaining $5,000 from the customer to fully complete the repair – unless the customer has an insurance policy with an appraisal clause.

In that case, an independent appraiser, like Collision Safety Consultants, is hired by the insurance company, and they negotiate the claim.

“We call that leveling the playing field,” Walkowiak said.

Walkowiak got into independent appraising thanks to his father-in-law, who co-owned a shop in Belmont, NC. He suggested Walkowiak could help customers dealing with total loss and diminished value claims, as well as post-repair inspections.

“I liked it because I was helping

consumers overcome the shortfall between them and an insurance company,” Walkowiak said.

Collision Safety Consultants started with diminished value claims. The company then started doing post-repair inspections.

“We were checking other body shops’ work to make sure that it was done properly and safely,” Walkowiak said. “I was the bad guy. You can imagine what I was known as, and it sure wasn’t a sweetheart.”

Collision Safety Consultants handles shops found to be in the wrong differently, depending on the circumstances.

“If they cheated somebody or committed fraud, all bets are off. We were taking them to the mat. You get no mercy,” Walkowiak said.

But if it was found to be a matter of a tech who took a shortcut, or a new manager who didn’t know a process yet, the appraisal company would take another approach.

“We would educate them,” Walkowiak said. “Catching them doing something bad was probably the best thing that ever happened to them, because we showed them how they could make more money doing it properly.”

From Body Shop Adversary to Asset

Strandberg pointed out Collision Safety Consultants seems to have morphed into an asset for body shops, as it often helps shops get paid for what they believe is a proper estimate.

Walkowiak said shops certified to work on premium brands, like Tesla, Jaguar and Mercedes-Benz, have the most challenges, as insurers don’t want to pay for higher labor rates. He said that can almost be considered the insurance company’s violation of the contractual obligation between the customer and the shop.

“When you take your car into the shop, that contract is between the vehicle owner and the shop. The insurance company doesn’t come into play,” Walkowiak said. “Now the insurance company says they’re not going to pay the consumer.

“What I’m doing is helping the consumer. I’m not actually helping the body shop now,” he said. “It helps the body shop because they get paid and the consumer feels better about the body shop, and that they don’t have to pay out-of-pocket money.

“But my goal is to make a consumer whole. And in that process, the body shop gets made whole without the consumer getting injured,” Walkowiak said.

Negotiating with Insurance Companies

Strandberg asked if there are any best practices shops can deploy to negotiate with insurers to get fair compensation.

“Documentation, documentation, documentation, documentation,” Walkowiak said.

He recommended taking photos of every step of the process and printing them out, along with the written OEM repair procedures.

“You’re talking 80, 90 pictures. It’s a little cost of ink, but there is no question. Was it done?” Walkowiak said.

When an insurance company then says it won’t pay for a part of the process, the independent appraiser can point out where the OEM repair procedures called for it.

Insurance companies also challenge labor rates, but Walkowiak said his company fights for higher rates charged by shops that invest in the equipment and training to justify them.

The real key is to be a superior negotiator, Walkowiak said.

“I’m a hell of a negotiator,” he said. “Either people like me, they loathe me or they respect me. Any three of those pretty much gives me what I want.”

Perserverance pays off. Walkowiak

suggested going up an insurance company’s chain of command. “Insurance company managers hate to get phone calls,” he said.

Some shop owners and customers believe lodging complaints about an insurance company with their state’s Department of Insurance doesn’t do anything, but if the same company is reported repeatedly, the managers will eventually make concessions.

“They’re going to come around and say if every consumer is filing a complaint about Jim the adjuster, because Jim doesn’t want to pay for everything, then eventually Jim’s going to get pulled away from that shop,” Walkowiak said.

Strandberg asked about the best approach when trying to negotiate payment with an insurance company.

“I used to come in like a bulldog. Now I’m pretty much nice to everybody, and until someone disrespects me or says something that I can’t live with, I’m still nice,” Walkowiak said. “When it comes to negotiating, just be nice, be polite, be respectful and see what they got. Feel everything out.”

He said there are cases where the issue is more of a clash of personalities rather than a question of procedure.

If there’s “bad blood” between an insurance company and a shop, and the insurer is challenging a

repair estimate, Walkowiak said the first option is to check to see if the customer’s policy has the appraisal clause.

If not, the next step is to ask the insurance company management to assign a new appraiser or adjuster. Or, Walkowiak said, the shop could have a sit-down with the insurance company employee to try to clear the air.

Proper Repairs vs. Full Payment

Walkowiak said it is more important to complete every step of a repair procedure than it is to make concessions so the insurance company payment covers it, as improper repairs can cause serious injury or death in a future collision.

“Any shop that performs a repair on a vehicle is liable. Doesn’t matter what the insurance company wrote. Doesn’t matter what the insurance company said. Ultimately, liability falls on the shop owner,” Walkowiak said.

Every customer needs to be educated from the first consultation that their insurance company might tell them the shop charges for things no other shop does, and then how to challenge it.

Walkowiak said customers should be taught to ask which shops charge less, and then ask if those are DRP

Toyota Awards $5.8 Million To Enhance STEM Education in MS

Toyota USA Foundation announced a $5.8 million grant to Lee County and Pontotoc City Schools in Mississippi, aimed at revolutionizing STEM education

aim to create limitless possibilities for all in our work with communities to address barriers so that everyone can participate in the quality STEM jobs of the future.”

and fostering workforce readiness. Part of Toyota’s Driving Possibilities program, the funds align with the company’s goal to support educational and community engagement nationwide.

“We believe all students deserve equal access to opportunities and a pathway to high-growth careers, no matter their background,” stated Ana Meade, Vice President of Social Innovation at Toyota. “Through Driving Possibilities, we

The program in Mississippi collaborates with the CREATE Foundation and the University of Mississippi to implement a national approach to education that integrates STEM into daily learning and professional development for educators. This effort is designed not only to improve educational outcomes but also to meet the pressing need for skilled STEM professionals.

“The tailored plan will help

enhance educational opportunities from PreK through 12th grade while integrating STEM into the everyday life of our students and teachers,” said Aaron Foster, plant vice president of Toyota Mississippi.

Lee County Schools will focus on embedding STEM programming at the middle school level and developing a targeted professional development program for educators. Pontotoc City Schools will introduce a Newcomer Program to provide resources for Englishlanguage learners, including translation services.

Mississippi Lt. Gov. Delbert Hosemann praised Toyota’s commitment: “Toyota is leading the way on helping us create Mississippi’s next generation workforce. When industry and education work together, the possibilities for our children and our economy are endless.”

This investment in Mississippi’s educational landscape is part of a broader effort by the Toyota USA Foundation, which has committed nearly $72 million across various locations to support community and educational advancements.

Crash Champions Launches Campaign Awareness

Crash Champions Collision Repair Team has kicked off its annual “Champions For a Cause” campaign in support of Breast Cancer Awareness Month and Susan G. Komen, continuing a tradition of raising both awareness and funds for breast cancer research and support services.

Throughout October, more than 650 repair centers will unite as employees don pink polos and T-shirts adorned with a special edition Crash Champions logo and ribbon. Proceeds from the sale of these uniforms will directly benefit Susan G. Komen, an organization with a long-standing commitment to groundbreaking research and community health resources.

Crash Champions raised $70,000 for the organization in 2023 through its campaign efforts, which included participation in “Race for the Cure” and “More than Pink Walk” events. The company continues its commitment in 2024, as a proud National Team supporter of these events, taking place across the U.S.

We Answer the Call! TM

The Collision Industry Foundation (CIF) is a non-profit organization dedicated to providing support and assistance to collision repair professionals during times of crisis and hardship.

MISSION

Secure and distribute donations to individuals who have experienced significant losses due to natural disasters or other catastrophic events.

Tax-deductible donations needed to provide assistance: www.CollisionIndustryFoundation.org

Collision Shops, Vendors Can Help Counter Grim Entry-Level Tech Numbers

By John Yoswick Autobody News

George Arrants, vice president of the ASE Education Foundation, doesn’t think the collision industry’s technician shortage is based on a lack of interest in the trades by young people nor too few students entering collision repair training.

“The number of students in a program this year is higher than ever before,” said Arrants, whose organization evaluates and accredits entry-level automotive technology education programs against industry standards. “We see that most of our programs are at capacity or higher. But then for some reason, once we get them in the programs, we think our job is done.”

The problem, he said, is the followthrough during those students’ time in the program and into their first job in the industry. Arrants estimates 1 in 5 graduates of automotive training programs never enter the industry, and about an equal number leave the industry within two years.

I-CAR research has produced even more stark findings: Only 15% of students who enter the industry stay for more than 18 months.

“We’re eating our young,” Arrants said. “These people are interested in our industry. But we bring them into our shops and expect them to be productive. There’s not one of us who was productive our first day on the job. There’s no on-boarding, there’s no mentoring.”

Waiting to employ students only once they finish a program is also an issue, he said.

“If you don’t hire them until after they graduate, the only thing they know is the program they were in,” Arrants said. “That means when they come to you, it’s a whole new experience. And that’s why we lose a lot of them. But we have found that for those students who work in your shops while they’re in school, it’s a more seamless transition. And they stay for decades.”

He said there’s another sad truth about those entry-level technicians leaving the collision industry: “They’re not leaving skilled trades,” he said. “They’re staying in the skilled trades. They’re just not staying with us.”

Help Foundation Support Schools, Students

What else can shops and vendors in the industry do to help collision repair training programs and the students they are training to help stem the flow of potential technicians out of the industry?

Supporting the Collision Repair Education Foundation (CREF) is one good step. CREF provided $136,000 in scholarships to collision repair students last year, and another $678,000 in grants to 110 schools to benefit their collision repair training program. CREF also donated more than $18 million in product donations to the programs, including 78 current model Audi and Volkswagen vehicles to schools.

for more participants in their program advisory committees.

“One of instructors’ biggest pet peeves is an employer, who they’ve never heard from or seen, coming in at the end of the spring semester and saying, ‘I want your best students,’” Eckenrode said. “The instructors look at them thinking, ‘Where have you been for the past school year? I’m going to help those employers and local businesses that

Brandon Eckenrode, executive director of CREF, said any organization within the industry can sponsor uniforms for students at their local school.

“We’ve heard from instructors that when the students have brand new uniforms rather than just wearing street clothes, that has made the biggest impact of all that we’ve given out,” Eckenrode said. “It’s a way for you to connect with the students as it’s you, the sponsoring company, that’s helping distribute the uniforms, and talking to these students, helping make sure that these students look professional while they’re learning. The sponsoring company’s logo is on the front of all the uniforms, so it’s almost a walking billboard for your company.”

CREF can also assist with parts donations.

“Instructors have told us their No. 1 need is donated scrap and spare parts,” Eckenrode said. “We literally have instructors rummaging through the Dumpsters of body shops and dealerships looking for spare parts that they can bring back for their students to work on. I think we can agree that with the number of damaged and slightly used parts that are taken off of customers’ cars, there’s absolutely no reason why instructors should be rummaging through the trash to get these parts.”

He said most schools are looking

different companies that are waiting for them to graduate, and it’s that that motivates them to stay in the collision industry and that program,’” Eckenrode said. “They walk out of those events with a stack of business cards. Some of them walk out with multiple job offers.”

For more information about working with CREF to help a school’s collision repair program, check the foundation’s website.

Entry-Level Training Program for In-Shop Use

Shops can also help relieve the industry’s technician shortage by training new entry-level workers inhouse. I-CAR is now making its new I-CAR Academy Program available to collision repair facilities, after launching it for schools earlier this year. The I-CAR Academy program is an early career program to educate and recognize new technicians starting a career in the industry.

I-CAR’s Jeff Peevy said the program is in part a response to what he heard from shops about entry-level technicians they were seeing from school collision repair training programs.

are committed throughout the entire year, not just coming in and trying to cherry pick those best students when they are graduating.’”

Eckenrode noted that in-kind donations made up the bulk of the assistance the foundation provided to schools last year.

“Tools, equipment, supplies, parts, everything that your companies may have, we can find homes for those in local schools,” Eckenrode said. “There are some schools that have 150 students and their total program budget is $3,000, and that is the state of what they have. So it’s an opportunity for us to make sure that they have the items they need to provide a quality technical education.”

He said CREF also continues to hold career fairs around the country.

“These help showcase to these students all the different companies that are interested in them, Eckenrode said. “And what’s great about these events is it’s not just repair facilities. It’s tool and equipment companies, paint vendors, insurance, rental car. Everybody is there to showcase, ‘Hey, we need you.’

“We’ve heard from instructors who say, ‘I’ve had students who are kind of trying out collision repair and they’re not quite sure if they like it, but they come to these career fair events, they see all the

“There was a lot of feedback saying a young person coming out of a school had experienced an inch-deep and a mile-wide training experience,” Peevy said. “And when they were put into the shop environment, they really did not have a high level of proficiency in anything. They had experienced a lot of things, but they could not be put on something to do without having a lot of oversight.”

The new program focuses instead on “what would you have an entrylevel technician do that would make them valuable to your operation from day one, what would make them feel valued from day one,” he said.

I-CAR Academy’s curriculum covers collision repair fundamentals such as safety and tool skills, plastic repair, small dent repair, disassembly and reassembly, and supports a shop using it by including resources on selecting and training a mentor. A badging system recognizes a new technician’s progress.

“Our industry is in dire need of technicians,” I-CAR CEO John Van Alstyne said. “For some, the right starting point is a school, while others excel beginning their career in a shop. Regardless of where a technician enters the industry, they can count on I-CAR Academy to give them a solid and relevant foundation from which to build their future.”

George Arrants of the ASE Education Foundation estimates 1 in 5 graduates never enter the industry, and about an equal number leave the industry within two years.

Exclusive Look: 2024 MSO Symposium Agenda Offers Critical Insights For Collision Industry Leaders

By Leona Scott Autobody News

As the automotive repair landscape rapidly evolves, staying ahead of industry trends and technology advancements is crucial for multishop operators (MSOs) executives.

The 2024 MSO Symposium, now in its 13th year, promises to deliver a robust agenda packed with invaluable content tailored to industry leaders’ needs. Scheduled for Nov. 4 in Las Vegas in advance of the SEMA/AAPEX show, this exclusive annual event is set to provide attendees with a unique opportunity to network, learn and strategize for future growth.

Navigating the Collision Industry’s Future: An Insider’s Perspective

For Autobody News readers, we’re offering an exclusive preview of the MSO Symposium’s comprehensive agenda, highlighting sessions designed to empower collision repair professionals to navigate the industry’s ever-changing landscape.

Autobody News spoke with David Black, corporate collision director at Body by Cochran and MSO Symposium advisory board member, to delve into the event’s planning

process and the thought-provoking topics on the docket.

Black, who has been attending the MSO Symposium since 2015 and joined the advisory board in 2018, shared his insights into the event’s strategic focus.

“The board is diverse, representing various perspectives across the collision repair industry. We tackle the good, the bad and the indifferent, discussing what’s affecting MSOs and identifying areas of opportunity,” Black said. “Our goal is to make sure attendees leave the symposium better informed and ready to seize opportunities for business growth.”

Key Topics: Calibrations, AI, and a

New Customer Paradigm

This year’s agenda includes several high-priority topics that will shape the future of the collision repair industry. Sessions will cover a range of critical issues, from the complexities of calibrations to the transformative potential of artificial intelligence.

“Calibration is a hot topic right now,” Black said. “With the increasing sophistication of vehicle technology, ensuring accurate calibrations has become a business-critical function for MSOs. We’ll explore the latest advancements and best practices to help shops optimize this process.”

Artificial intelligence (AI) will also take center stage, with sessions dedicated to its current and future applications in the industry.

“AI is not just a buzzword — it’s a tool already making a significant impact,” Black said. “From AI-driven estimating to enhancing customer service through AI-powered solutions, we’ll cover the full spectrum of what s possible now and on the horizon.”

The Customer Experience: A Shift in Expectations

The pandemic has reshaped how customers interact with businesses,

and the collision repair industry is no exception. “We’ve seen a shift in the customer base,” Black said. “Customers now use their phones for everything, including scheduling repair appointments. We need to meet them where they are and make the process as seamless as possible — like Amazon.”

The symposium will address this shift with sessions focused on integrating technology to enhance customer experience.

An Agenda Packed with Insights and Networking Opportunities

Here’s a sneak peek at the 2024 MSO Symposium agenda:

9-10 a.m.: Welcome Breakfast & Networking Hour — Sponsored by LKQ Corporation

10-10:15 a.m.: Welcome and Introductions

10:15-11 a.m.: Where is the Economy Headed: 2025 and Beyond

— Phil Mackintosh, Nasdaq’s Chief Economist, will provide a macroeconomic outlook.

11-11:30 a.m.: Trends and Metrics Impacting the Repair Facility Market

— Kyle Krumlauf, CCC Intelligent Solutions, will provide a deep dive into

David Black, MSO Advisory Board member

the latest data trends.

11:30 a.m.-noon: Scale and its Rewards: Industry Landscape and Market Dynamics — Dave Roberts will explore market consolidation trends and capital considerations.

Noon-12:30 p.m.: Solving Problems: Re-imagining Your Business

12:30-1:45 p.m.: Plated Luncheon — Sponsored by PPG Industries

1:45-2:30 p.m.: Panel Discussion: Calibration — Addressing challenges and opportunities in vehicle calibrations.

2:30-3:15 p.m.: The Power of AI Today, Tomorrow and Next Year — Featuring Ryan Taylor from BodyShop Booster, discussing AI’s diverse applications.

3:15-4 p.m.: Networking Break — Sponsored by Axalta Coating Systems

4-4:45 p.m.: Technology Panel: Business & Data System Interruptions

4:45-5:15 p.m.: Futurist: Automotive & Beyond

5:15-7 p.m.: Industry Networking Reception — Sponsored by SherwinWilliams

Why You Should Attend: A Unique Perspective and Networking

The MSO Symposium is a chance to network with leaders from large, small, public and private operations. Black highlighted the event’s inclusiveness: “I see myself like these other guys. I may operate on a larger scale, but we share more similarities than differences. The symposium is about tapping into those similarities and learning from each other.”

Attendees will benefit from realtime updates on what’s currently happening and gain insights into what will shape the future of the collision repair industry.

“We want every attendee to leave with a better understanding of the industry’s future and how to grow their business,” Black said.

If you want to attend this exclusive event, visit MSOSymposium.com to learn more and see if you qualify. The MSO Symposium is a must-attend for those seeking to stay ahead in an everevolving industry.

Cause Most ADAS-Related Complaints from New Vehicle Owners

Annoying alerts from Advanced Driver Assistance Systems (ADAS) are the leading cause of complaints in new vehicles, according to the J.D. Power 2024 U.S. ADAS Quality and Satisfaction Study.

The study points out that ADAS-related issues contribute to 12.8% of all new-vehicle problems, amounting to 24.9 problems per 100 vehicles (PP100).

Most concerning is that vehicle alerts, specifically, have emerged as the most frequent complaint, averaging 9.0 PP100. This issue has shown a steady increase over the past five years, indicating a growing problem as vehicles incorporate more advanced technologies.

“The biggest issue consumers have with advanced driver assistance systems is that the alerts are annoying and

bothersome,” said Ashley Edgar , senior director of global automotive supplier benchmarking and alternative mobility at J.D. Power. “As more technology is added to vehicles, manufactures need to ensure that driver assistance systems are integrated in such a way that enhances safety without detracting from the overall driving experience. Additionally, dealer personnel should focus on educating new-vehicle buyers about the purpose of various ADAS technologies to increase comprehension and satisfaction.”

The annual study, now in its third year, analyzed feedback from 99,144 owners and lessees of new 2024 modelyear vehicles, surveyed after the first 90 days of ownership. The survey period spanned from July 2023 to May 2024.

Low-Voltage Batteries in EVs, Hybrids Need Particular Attention in Collision Repair Shops

By John Yoswick Autobody News

Donny Seyfer of the National Automotive Service Task Force pointed out a variety of things collision shops and insurers should be aware of related to the lowvoltage batteries within electric and hybrid vehicles, including the fact there are a lot of different chemistries involved.

“It’s very critical that you are aware of what you’re working on, because they’re not all the same,” Seyfer said. Battery chargers, for example, need to be designed for the type of battery being charged.

Second, battery management systems, even on internal combustion engine (ICE) vehicles, have become much more sophisticated.

“Battery life also is a big issue, depending on where the vehicle lives,” he said, noting that cold and hot climates are hard on batteries. “So keep in mind that many times you may have a vehicle come in with a pre-existing condition that you [need to] catch on the front-end.”

A pre-repair scan helps ensure a shop and insurer are “not on the hook for things that weren’t related to the accident, nor something that happened in the shop, particularly given the cost of some of these batteries.”

Alternators or generators are battery maintainers, not battery chargers, he cautioned.

“So if you are jumping vehicles and then expecting that alternator to do all the work, you’re beating the living hell out of that alternator,” Seyfer said. “It was not designed for that. In fact, you can cause damage to the battery because the alternator will work so hard to do a job that it wasn’t intended to do.”

It’s also very important to know what “fully-charged” means for the different types of batteries.

“A 100% charged 12 volt battery is actually sitting at about 12.7 to 13.2 volts, not 12 volts,” he said. “In fact, if that battery is down to 12 volts, it’s basically discharged. EVs that have lithium ion or lithium iron chemistry functions usually are looking for a 40% to 80% charge. That’s where they work the best. If you overcharge or undercharge them consistently, it hurts them.”

Alternators and generators aren’t the only things that can be damaged by an undercharged low-voltage battery on an electric or hybrid vehicle, Seyfer said.

“If the charging system voltage or the battery voltage is low, the starter will work way harder to do its job against that low voltage and it will draw more current, which can just tear up starters,” he said. “Of course, it damages the battery, particularly if they run at these low charges constantly. And most importantly, it can create diagnostic trouble codes that you will have a really hard time diagnosing. If you’re starting vehicles consistently that have low voltage, they start to get a little upset with you.”

Seyfer recommends always looking at the OEM service information to confirm the type of battery the vehicle has.

“Yes, they’re marked, but you might have to take the entire battery out,” he said. “Many of them are in cases to keep the temperature regulated so they don’t get too hot. So your best bet is to look up the battery in the service information.”

The charging systems often draw current while the vehicle is just sitting, he said.

“And it’s kind of big numbers these days, so you may actually want to maintain a battery while the vehicle is waiting for parts or things that might take a while to get there,” he said. “Make sure you get a [good] battery charger, and the prices are rather stunning. But the nice part is that many of them are capable of doing all different [battery] chemistries for you.

“You may also want to get a power supply, if you don’t already have one, so that when you’re doing remote scanning or you are doing calibrations and things like that, you can maintain that battery voltage in the system continuously, and it replicates what the charging system does while that vehicle is sitting static for a while during operations,” he added.

Charging has to be current-, voltage- and temperature-regulated, Seyfer said.

“If any one of those three parts of the triangle are off, you can damage the battery, any kind of battery,” he said. “This is why modern chargers are really important, because if you

just put the right voltage to it, you could be putting stunning amounts of current in it with some of the old push-around batteries.”

His final caution related to lowvoltage battery systems could come as a surprise to shops.

“It seems to be becoming a more and more common issue:

vehicles that are really pretty new that have batteries that are not up to the task, that can set diagnostic trouble codes and give you a major headache trying to diagnose them,” he said. “We [check] this with a scope, but you can easily do this with a volt Ohm meter that has min/max recording capabilities on it. If you start a vehicle while it’s sitting there with what you would consider a correct charge, a battery sitting at, say, 12.7 volts, and you go to crank it, watch to see if that voltage drops too low.

“We had a Subaru recently that was only one year old, and the battery went down to six volts,” Seyfer said. “It was setting diagnostic trouble codes. Tech couldn’t figure out what was going on. That can cause modules to brown out and not work correctly. So just keep that in mind if you’ve got inexplicable things happening, particularly right after a start.”

Donny Seyfer of the National Automotive Service Task Force said a scan of an electric or hybrid vehicle arriving for collision repair can make shops and insurers aware of pre-existing battery issues.

Axalta Irus Mix – a Leap Forward in Refinish Technology

Axalta Irus Mix is the future for bodyshops. It is the fastest fully automated, completely hands-free mixing machine for the automotive refinish industry. It delivers highly accurate color, maximizing profitability and minimizing environmental impact to help bodyshops meet or exceed key business goals. Axalta Irus Mix, which works with Axalta’s innovative bottles made from 50%

Axalta Irus Mix, with its patented technology, is the fastest fully automated mixing machine on the market - between 15% and 100% faster than anything else available. Refinish customers can save more than 60% on labor time with Axalta Irus Mix compared to manual mixing.

Labor Optimization

As cutting-edge as Axalta Irus Mix is, it is extremely easy to use. In fact, one of the benefits of Axalta Irus Mix is that a skilled refinisher doesn’t have to operate it; anyone can, freeing up skilled technicians to do other jobs while the paint is being mixed. It is straight-forward and intuitive so after only one training session someone will be very comfortable and confident using Axalta Irus Mix.

Consumption Benefits

Axalta Irus Mix was designed to work with Axalta’s proven bottle system, so there is no need to refill or decant product into special bottles. Additionally, the bottles are fitted with precise dosing lids, delivering accurate color without waste. The computer-controlled dosing enables bodyshops to mix colors in small amounts resulting in less consumption and less waste. And for those tints that are not used frequently, there are four optimized bottle sizes that perfectly match tint popularity. For the bodyshop, this means less money tied up in stock.

Environmental Thoughtfulness

Axalta’s bottle system is made from 50% recycled plastic, underscoring Axalta’s commitment to sustainability. Spies Hecker Permahyd Hi-TEC is available in bottles exclusively with Axalta Irus Mix.

Axalta Irus Mix is the final step of Axalta’s simple, three-step Axalta Irus digital color management process: Scan – Match – Mix.

First, refinishers scan the color with Axalta Irus Scan – the newly launched spectrophotometer. This new technology scientifically measures paint color on a vehicle to provide accurate color matches in both waterborne and solventborne basecoat technologies.

Second, match the color using Axalta Nimbus Color, a revolutionary platform that leverages proprietary algorithms to find, sort, and return accurate color formulas.

Then it’s time to mix with Axalta Irus Mix. Axalta Irus Mix enables its users to work more efficiently, profitably and sustainably. Everything about Axalta Irus Mix is technologically advanced. Simply launch the mixing process from a PC or tablet and put the empty mixing cup in Axalta Irus Mix. The mixing formula is wirelessly sent from Axalta Nimbus Color to Axalta Irus Mix and, with a simple push of a button, Axalta Irus Mix does the rest, allowing skilled refinishers to do other, more productive tasks. The mixing cup is removed when finished and ready to be attached to the spray gun. For added convenience, after dispensing, the machine carries out quick automatic nozzle cleaning procedures to avoid blockages.

Axalta Irus Mix is linked to a cloud-based monitoring system that continuously checks its status. Users also have access to Axalta sales, technical and color teams.

Troy Weaver, Senior Vice President, Global Refinish, says, “At Axalta, we strive to be at the forefront of innovation. We constantly look for ways to help our customers to do business better, to enable our customers to work as efficiently as possible and to maximize their profitability. Axalta Irus Mix has done just that – as we have seen with more than 100 machines in use globally. Axalta Irus Mix is ideal for bodyshops and multi-shop owners who are looking to increase efficiency, profitability and to do more jobs per day. It not only reduces bodyshops bottlenecks and frees up refinishers to carry out more profitable, highly-skilled tasks, but also it boosts bodyshops’ capacities, saving them money and helping them become more sustainable. We are delivering technology that truly automates color like never before.”

How Body Shops Can Navigate the Challenges of EV Collision Repairs

By Leona Scott Autobody News

As electric vehicles (EVs), especially battery electric vehicles (BEVs), become more common, collision repair shops face many challenges, such as managing high-voltage batteries, thermal runaway risks and complex diagnostics. Advanced tools, proper training and realtime access to OEM repair data are essential for safely handling BEV repairs and ensuring shops stay competitive.

In this question-and-answer article, Craig Edmonds, president of asTech, prepares repairers for the challenges of repairing BEVs. In addition, we hear from a collision repair shop in Glendale, AZ, which is positioning itself as consumers’ goto repair solution for BEVs.

Q:As EVs become more common, how can collision repair shops address the unique challenges?

One of the most significant challenges for repair shops is managing the HV battery, which stores substantial energy. Mishandling can lead to dangerous outcomes. Untrained technicians risk severe injury, while improper repairs could cause further damage to the vehicle. Another challenge is the risk of thermal runaway, where an unseen

Edmonds: As EVs become more prevalent, collision repair shops face several challenges. A major concern is the complexity of highvoltage (HV) systems, particularly in battery electric vehicles. BEVs rely entirely on large HV batteries for propulsion, introducing safety and technical challenges during repairs. Unlike traditional internal combustion engine (ICE) vehicles, BEVs require specialized training and equipment to handle these powerful batteries safely.

internal HV battery issue, such as damage from an accident, could cause a fire. Shops must diligently monitor the battery’s condition, especially after a collision. What might look like minor damage to the battery shell could result in a catastrophic fire if not handled properly.

Moreover, BEVs depend on complex thermal management systems to regulate battery temperature. These systems must function correctly to avoid overheating, which could lead to battery degradation or failure. Collision repair shops must understand and assess these systems during repairs to ensure battery health.

Technological tools can play a key role in identifying battery issues. Once it’s safe, performing an OEM or OEM-compatible pre-scan can provide insights into the battery system’s condition. However, while onboard diagnostics help, they don’t always capture physical damage sustained in an accident, so combining data from scans with a thorough visual inspection is essential.

Q:How important is it for shops to have a

comprehensive repair plan when dealing with EVs, and what role do tools like asTech’s play in ensuring those repairs are efficient and accurate?

Edmonds: Developing a thorough repair plan is critical for any vehicle, but especially for BEVs. Their increased complexity means that even small mistakes can turn a repairable car into a total loss. Additionally, the rising costs associated with BEV components make precision in the repair process vital.

Diagnostic tools are evolving along with vehicle technology. Many legacy OEMs have adapted their diagnostic methods to fit BEVs, helping their dealer networks avoid learning entirely new systems. However, newer BEV manufacturers are introducing more sophisticated onboard computers, integrating diagnostic tools directly into the vehicle. This shift requires technicians to adapt and learn to interpret data in new ways. Tools like those provided by asTech can simplify this process. By connecting directly to OEM tools, shops can access the most up-to-date diagnostic procedures, ensuring technicians work with accurate data. These tools also help

Craig Edmonds, president of asTech.

technicians understand complex reports and meet insurance carrier requirements, further streamlining the repair process.

Q:What are some key differences between traditional and EV repairs?

Edmonds: Safety is one of the main differences between traditional vehicle repairs and EV repairs. While conventional vehicles don’t pose the same level of risk, working on a damaged BEV introduces hazards like high-voltage electrocution or fire. Developing safety policies and ensuring all technicians are trained on BEV systems is essential. Shops cannot afford to take risks when it comes to EV repairs.

Q:How can advanced diagnostic tools and real-time access to OEM repair data help shops avoid common issues?

Edmonds: Advanced diagnostic tools and real-time access to OEM repair data are invaluable for shops working on BEVs. Battery diagnostics and HV system repairs are complex and require up-to-date information. Before a BEV enters the garage, shops must have the right tools, equipment, training and repair data. Access to OEM repair data in real-time ensures that technicians know the latest procedures and can avoid common pitfalls in EV repairs.

Being “service ready” for BEVs means thoroughly preparing with the necessary knowledge, parts, and skills. Waiting until a BEV arrives to start learning puts the shop and its staff at significant risk. Instead, preparation is key to maintaining safety and ensuring accurate and efficient repairs.

Arizona Collision Shop Adapts to EV Repair Market by Being ‘Service Ready’

Leigh Vilcak, body shop manager at Sands Collision Center in Glendale, AZ, is preparing his team to work on BEVs. The facility has been partnering with asTech for many

Harper Volkswagen

years, and its partnership has encouraged it to be more “service ready.”

“At Sands, we’re just beginning to see BEVs enter our service department, though not many have come through the body shop yet,” Vilcak said.

Sands Collision is part of an automotive group that also owns Chevrolet and Kia dealerships. The collision center is becoming a GMcertified repair facility.

“Manufacturers are increasingly restricting the sale of BEV parts to non-certified shops, which has made certification a top priority for us,” Vilcak said.

In addition to becoming GM-certified, Sands Collision has significantly invested in upgrading its equipment. BEVs often come with heavier batteries, which require more substantial lift equipment. Sands plans to invest in a $68,000 frame rack to accommodate the structural needs of BEVs.

Vilcak said the body shop has created clean, dedicated areas for working on EVs, especially since many BEVs are made with aluminum. Aluminum is more susceptible to cross-contamination and galvanic corrosion, he explained, and it presents unique

safety risks due to its explosive tendencies in dust form. Therefore, high-voltage components and explosive dust are a huge risk when not properly handled.

Training has been a critical focus for Vilcak’s team. “We’re ensuring that our technicians are fully equipped, from using the correct safety gloves to learning how to store the large batteries that come with BEVs properly,” he said.

Looking Ahead: The Future of Collision Repair Technology

The collision repair industry must focus on continuous learning and adaptation. Although BEVs are gaining traction, they won’t dominate the market for several years. Meanwhile, hybrid vehicles will likely become more common as OEMs continue to develop and invest in them.

Repair shops must prioritize education and training in new vehicle technologies to remain competitive. Establishing standards for learning about electronics, advanced driver assistance systems (ADAS), programming and diagnostics is critical. By creating a strong foundation of knowledge in these areas, shops can ensure they are ready to service current and future vehicle technologies.

Leigh Vilcak, body shop manager at Sands Collision Center in Glendale, AZ.

evaluation,” Gredinburg said.

‘Repair or Replace’ Considerations

Andrew Batenhorst of the CIC Estimating and Repair Planning Committee pointed to a series of factors that can play into case-bycase decisions during estimating related to repair versus replace of a damaged panel.

The first, he said, involves reviewing the automaker documentation to look for any guidelines, the types and mil thickness of material involved, limits on the use of heat, whether there are restrictions on access to replacement parts, and what types of tools or consumables would be needed for repair.

“That brings us to accessibility, basically factoring what panels are around where we’re working, how much room we have from the backside, are we going to have any issues with getting the tools onto the panel to do what we need to do to properly straighten it,” Batenhorst said. “If we’re inhibited from doing that, that could lead to a ‘replace’ decision instead.”

Another factor is whether there is damage in a crumple zone that would affect repairability.

“In many cases, that’s a dealbreaker automatically,” he said. “If a crumple zone is affected, going back to the OEM instructions, that may right away warrant the replacement.”

Similarly, an estimator needs to determine if body lines or contours on a damaged part can be recreated accurately.

“The invasiveness of the repair is also very important,” Batenhorst said. “Our approach is always to minimize the intrusiveness to the vehicle, and try to preserve as much of factory e-coating, and limit how drastically we need to go into the car.”

There are refinish considerations, such as how much factory corrosion protection needs to be protected or restored, maximizing the amount of factory paint as possible, and considering whether refinishing or blending of adjacent panels would be involved.

One final consideration is part availability.

“Obviously, there’s a financial or economic decision that gets factored into this,” Batenhorst said. “We are still dealing in many cases with part delays from all the turmoil that’s in the world currently. Sometimes that may cause you to have a different approach to that repair or replace decision that you’re trying to make.”

Industry Slow to Change

Despite the prevalence of onthe-spot evaluations required during estimating, many in the industry see resistance among some insurers to move away from strict use of the 50% formula for blending rather than looking at it based on the factors that vary from vehicle to vehicle.

Darrell Amberson of the LaMettry’s Collision chain in Minnesota said changes to such things as the blend formula often take too long to get implemented.

“As an industry, when we have some significant changes come along, we’re notoriously slow,” Amberson said. “It tends to take us years to really evolve to the point where the dust settles and common compensation methodologies are established as the norm.”

He said he’s discouraged by how few insurers have been open to moving away from the old blend formula.

“I get a lot of excuses that are not necessarily based on good logic,” Amberson said. “Right now we have one insurer that’s adjusted its normal pricing. We have some others that are on a case-by-case

basis. But a whole lot of them are just not doing anything.”

He said he agreed repairers need to focus on the variables impacting the blend procedure the paint companies point to, rather than just the outcome of the 2022 blend study by the Society of Collision Repair Specialists, despite the efforts to make the study “accurate, fair and reasonable.”

“I’ve seen many industry changes over the years where we start a conversation and often there’s not much flexibility on the two sides,” Amberson said. “And then after a lot of education and discussions, we tend to evolve and find some kind of common ground. But we don’t do that enough or quick enough.

“We need more discussions like this [at CIC]. We need more activity from the paint companies. We need more insurance companies to come in and really understand the situation and help us all evolve,” he continued. “Too many times there’s a kind of a bullheadedness, ‘We’re just not going to accept a change,’ and that’s not necessarily reasonable.”

Saying he was speaking for a shop owner who couldn’t attend CIC, Andy Tylka of TAG Auto Group said that shop owner sees part of the problem is that 50% of full refinish time is still the default for blending in the CCC estimating system.

“He feels that doesn’t open up the mentality that it is an on-thespot evaluation,” Tylka said. “He is continuing to get responses from insurance companies that assume that the default is the standard. They’re referencing it as the standard, the established formula of CCC. He asked me to [say] that he feels like that 50% needs to go away. It needs to be a forced adjustment on every profile. Because right now it [seems to be] implying that there’s a recommended formula.”

Dan Risley of CCC Intelligent Solutions is the current chair of CIC, and he addressed that comment later in the meeting.

“I think it’s really a continual education process because we have the slider in there for the [user] to choose whatever they feel is necessary as an on-thespot evaluation,” Risley said. “The language is in there referencing the fact that it’s an on-the-spot evaluation. But that said, I heard the point loud and clear, and I’ll make sure I’ll bring that back to our team.”

Hunter Engineering is proud to announce that three Hunter products have been named winners in the 2024 PTEN People’s Choice Awards.

ADAS category: Ultimate ADAS. Ultimate ADAS combines standardsetting alignment technology with an efficient and easy-to-use guided target placement system for aroundthe-vehicle coverage.

Brake service category: AutoComp Elite Brake Lathe with HunterNet 2 Connectivity. Hunter made its popular AutoComp Elite on-car brake lathe even more popular by connecting it to the HunterNet 2 platform.

Lifts, jacks and stands category: RX14KL and RX16KL Scissor Alignment Lifts. Responding to a growing industry need for greater length, Hunter introduced new, longer variations of its popular RX14 and RX16 scissor alignment racks.

Andrew Batenhorst highlighted some of the factors that have to be taken into consideration when making “repair versus replace” decisions during estimating.

Dan Risley of CCC said his company has given users flexibility in calculating blend times and has stated it requires an “onthe-spot evaluation.”

Fits Right The First Time

Unlock savings and precision fit with genuine parts

• Save time and money: reduce returns by up to 16%

• Faster ordering process

• More accurate orders

• Easier invoice processing

• Live information

• Seamless fit

• Competitive pricing

Carlock Honda

Birmingham

800-987-0819

205-949-5457

Dept Hours: M-F 8-6 robert thompson@carlockcars com

AutoNation Honda

Clearwater

Clearwater

888-205-2564

727-530-1173

Dept Hours: M-F 7-7; Sat 8-5; Sun 10-3 santosr1@autonation com

AutoNation Honda

Hollywood

Hollywood

800-542-8121

954-964-8300

Dept Hours: M-F 7-7; Sat 7-5; Sun 9-5 hernandeze@autonation�com

Classic Honda

Orlando

888-893-4984

407-521-1115

Dept Hours: M-F 7-7; Sat 8-4 parts@classichonda com

Headquarter Honda

Clermont

800-497-2294

407-395-7374

Dept Hours: M-F 8-7; Sat 8-5 pepe guevara@headquarterhonda com

Acura of Orange Park

Jacksonville

888-941-7278

904-777-1008

Dept� Hours: M-F 7-8; Sat 7-5; Sun 9-3 msweeney@acuraoforangepark com

Duval Acura

Jacksonville

800-352-2872

904-725-1149

Dept Hours: M-F 7-7; Sat 8-5 Cecil adams@duvalacura com

Hendrick Honda Pompano Beach

Pompano Beach

954-425-8244

Dept Hours: M-Fri 7-6; Sat 7-5; gerardbruno@hendrickauto com

Holler Honda

Orlando

407-442-1938

Dept Hours: M-F 7-6; Sat 7-4 parts@hollerhonda com

Honda of South Miami

Miami

305-256-2240

Dept Hours: M-F 8-6 mfranceschi@hondaofsouthmiami com

Rick Case Honda Davie

877-544-2249

Dept Hours: M-F 7-7; Sat 7:30-4 robbutton@rickcase com

Ed Voyles Honda

Marietta

800-334-3719

770-933-5870 Direct

Dept Hours: M-F 7-7; Sat 7-6 hondaparts@edvoyles com

Gerald Jones Honda

Augusta

800-733-2210

706-228-7040

Dept Hours: M-F 7:30-6; Sat 8-5 tdunn@geraldjoneshonda com

Rick Case Acura Fort Lauderdale 800-876-1150

954-377-7688

Dept Hours: M-F 7:30-6; Sat 8-5 rubenramos@rickcase com

Jackson Acura Roswell

877-622-2871

678-259-9500

Dept Hours: M-F 7-6; Sat 7:30-6 kmcmillan@jacksonacura com

Honda Mall of Georgia

Buford/Gwinnett

678-318-3155

Dept Hours: M-F 7-7; Sat 7-5 cdunlap@penskeautomotive com

Milton Martin Honda

Gainesville

770-534-0086

678-989-5473

Dept Hours: M-F 7:30-6 robertthomas@mmhonda com

Honda of Newnan

Newnan

678-423-8183

Dept Hours: M-F 7-6; Sat 7-4 samuel trapani@henrickauto com

Nalley Honda Union City 866-362-8034

770-306-4646

Dept Hours: M-F 7:30-7; Sat 8-5 hondawp@nalleycars com

Patty Peck Honda

Ridgeland

800-748-8676

601-957-3400

800-476-9411

828-684-4400

Dept Hours: M-F 8-5; Sat 8-4 appletreeparts@hotmail com

McKenney-Salinas Honda Gastonia

888-703-7109

704-824-8844 x 624

Dept Hours: M-F 7:30-5:30 parts@mshonda com

Dept Hours: M-F 7:30-6; Sat 8-5 pmartin@pattypeckhonda com Apple Tree Honda Asheville

Vann York Automall

High Point

336-841-6200

Dept Hours: M-F 7:30-6; Sat 8-3

Fred

864-234-6481

Dept Hours: M-F 7:30-6; Sat 8-5 hgrparts@anderson-auto net

Piedmont

864-375-2082

Dept Hours: M-F 7:30-6; Sat 8-5 swhite@piedmontcars com

Nalley Acura Marietta 800-899-7278 770-422-3138

Dept Hours: M-F 7-7; Sat 7-5 byoung@nalleycars com

Dept Hours: M-F 7:30-6; Sat 8-1 www flowacura com

Karen Radley Acura Woodbridge

800-355-2818

703-550-0205

Dept Hours: M-F 7:30-5:30; Sat 8-3 coreythompson@radleyautogroup com

MISSISSIPPI

SO.

Airport Honda Alcoa

800-264-4721

865-970-7792

Dept Hours: M-F 7:30-6:30; Sat 7:30-5 parts@airporthonda com

AutoNation Honda

West Knoxville Knoxville

800-824-1301

865-218-5461

Dept Hours: M-F 7:30-6 rossd1@autonation com

Wolfchase Honda Bartlett

800-982-7290

901-255-3780

Dept Hours: M-F 7-7 ekerr@wolfchasehonda com

Checkered Flag Honda

Norfolk

800-277-2122

757-687-3453

Dept Hours: M-Sat 7:30-6 honda checkeredflag com

Hall Honda

Virginia Beach

800-482-9606

757-431-4329

Dept Hours: M-F 8-7; Sat 8-5 fox@hallauto com

Valley Honda

Staunton

800-277-0598

540-213-9016

Dept Hours: M-F 7:30-5:30; Sat 9-5 bwimer@myvalleyhonda com

West Broad Honda

Richmond

800-446-0160

804-672-8811

Dept Hours: M-Fri 7:30-6:30; Sat 8-5 wbhonda@aol com

TENNESSEE VIRGINIA

VIRGINIA

Analysts: Fed Rate Cut Could Drive Brownfield Acquisitions in Collision Repair

By Brian Bradley Autobody News

The recent interest rate cut by the Federal Reserve could spur more real estate acquisition in the collision repair industry, but it may take months for this and other impacts of the decrease to materialize, according to analysts.

“Interest rate cuts tend to cause capitalization rates to decrease because lower rates can make financing more affordable for investors in commercial properties,” Focus Advisors Senior Associate Madeleine Roberts Rich told Autobody News. “More affordable financing drives up valuations.”

The Fed cut interest rates by 0.5 percentage points to between 4.75% and 5% on Sept. 18, the first cut since March 2020. The action may signal more repair shop expansion and investments on the horizon.

But Rich cautioned it can take a long time for business owners to plan and find financing for major investments such as real estate purchases or business acquisitions. “It certainly does not happen overnight,” she said. It can take a while for other industries to respond to interest rate shifts as well. For instance, experts

expect the Fed rate cut won’t create significant effects in the manufacturing industry until January, spurred in part by an anticipated spike in consumer sentiment as credit card interest rates come down, according to a Sept. 19 article in Manufacturing Dive.

Analysts noted many of the Fed rate cut’s impacts on collision repair industry investments are uncertain writ large. Still, analysts envision a few potential outcomes.

decreases, as borrowing costs for real estate become more affordable, she noted.

“If they own a property where Caliber is the tenant or Gerber’s the tenant or Crash Champions is the tenant, the cap rate on their property’s going to go down a good amount,” Rich said. “Or, if they’re considering … an entry into a lease with that consolidator, they’re going to benefit from the lower cap rates as well.”

Rich said she believes the most significant impacts of the Fed rate cut will be on landlords who own shops occupied by consolidators. Fed rate cuts generally coincide with real estate capitalization rate

Scott Gould, senior vice president of investments at real estate investment brokerage firm Marcus & Millichap, said the Fed rate cut will likely propel “a little bit more” real estate investment in the collision repair industry.

“There’s still a lot of money on the sidelines just waiting to feel what’s going to happen next,” he said. “There’s that pent-up demand.”

With the rate cut, it could make more sense for high-leverage real estate investors in the collision sphere to snap up more real estate, Gould said.

“I’m optimistic that that will kick up more activity from passive investors looking to buy body shop properties as income streams,” he said.

However, current construction costs may not yet be conducive to a sustainable greenfield strategy.

National construction costs were about 27% higher in the second quarter of 2024 than in 2019, the last full year prior to the COVID-19 pandemic, according to the most recent Overall Construction Cost Index by construction and real estate development firm Mortenson.

Gould cited some remaining stagnation in the market. Loans aren’t as cheap as they were three or four years ago, which has made financing these investments a lot less attractive.

“The buyers that want to see an adjustment in pricing that haven’t really gotten that from the sellers, so there’s that delta between expectations, which has slowed transactions,” Gould said.

Shop Consolidations

Though the rate cut could catalyze some additional borrowing in the collision repair space, specifically for real estate, analysts believe it’s unlikely the move will directly spark new company acquisitions.

Real Estate Investments

Multi-shop operators (MSOs) have sought out some debt to drive their acquisitions during the 2020-2024 period of higher interest rates, but the industry can view debt-infused transactions as a gamble, according to Focus Advisors President Chris Lane

“First of all, it’s expensive,” he said. “Second of all, it’s risky.”

The disincentives of seeking debt, continuing high industrywide business valuations, and ongoing robust competition mean a rate shift in and of itself isn’t likely to sway consolidations one way or the other, Lane said.

“I don’t think that the cost of capital is going to influence the rate of consolidation,” he said. “It’s going to continue at the rate that it is. There’s just too much competition for shops that I don’t think the macro picture interest rates are going to matter that much.”

However, outside investors, such as private equity firms that acquire smaller mom-and-pop shops and MSOs, commonly use some bank debt alongside their existing equity to buy those shops and MSOs, Lane said.

Higher interest rates during the last four years have translated to banks scrutinizing private equity firms’ financials a bit more, and spending more time in vetting deals they lend for, he added. So, if more capital

opens, collision repair companies’ valuations could potentially see a modest uptick above their already strong levels.

Focus Advisors is a mergers and acquisitions (M&A) advisory firm for collision repair businesses looking to sell or acquire capital to grow. The firm represents the owners, not buyers, and has closed more than 30 MSO acquisitions.

Bank Interest Rates

Gould said he has already seen lenders start to quote lower interest rates in response to the Fed’s rate cut.

As of late September, some lenders were considering putting a floor on their five-year adjustments because they don’t know how low interest rates will go, he said.

“They don’t want to do a loan today at 6.5 [percent], and then [the Fed rate] goes back down to 4 [percent], and then they get readjusted much further south,” Gould said.

That said, not all interest rates have responded to the rate cut yet, he added. Lenders are all over the board.

Common real estate projects in the collision repair space, such as greenfield and brownfield investments, are generally more reliant on longer-term fixed rates than they are on banks’ prime rates,

Paul Knowlton, equipment finance sales executive for The Huntington National Bank, told Autobody News.

Banks’ prime rates are more closely tied to the federal funds rate.

“Prime doesn’t lower the 10year cost of money by half a point,” Knowlton said. “But in general, it’s trending the right way, and expectations are for rates to continue to drop and the yield curve to be normalized.”

Knowlton emphasized his opinions were only his, and not Huntington Bank’s.

A Sept. 23 Huntington Bank report noted longer-run rates have decreased for several months in anticipation of the Fed’s September rate cut, including for auto loans and home mortgages.

Further, the nationwide shift to electric vehicles and batteries is prompting a “boom” in factory construction, which is experiencing its highest spending level in decades, increasing from about $900 billion in 2013 to well over $2 trillion in 2023, according to the Huntington report.

“Rate forecasts are often wrong, so taking advantage of [longerduration] rates can reduce interest expense volatility and lock in the current outlook,” the report stated.

Political Backdrop

How quickly any macro effects of

the rate cut spill into the collision repair industry depend on a range of factors, including the ones described above.

Additionally, despite the rate cut, some financial uncertainty has percolated in the collision repair borrowing space regarding the pending November presidential election, analysts noted.

Companies are waiting to see the fiscal and tax implications of the next administration, according to Lane.

“To people, it feels like, ‘I’m more afraid of who the next administration is going to be, and what’s going to happen to my tax rate,’” Lane said. “They feel more strongly about, ‘What are my cap gains rates; what is that going to look like?’ than they do about interest rates. I think a lot of that is probably driving economic decisions.”

Though the political cycle can damper repair equipment acquisition and expansion decisions, it appears the decreased Fed rate is eliminating some of those headwinds, Knowlton said.

“Anytime there’s an election cycle, there’s uncertainty, and uncertainty isn’t conducive to making future investments, whether it’s buying a business or financing equipment,” he

l CONTINUED ON PAGE 31

Connecting Vehicles Could Be Useful in Collision Repair

by Abby Andrews Autobody News

CIECA recently hosted a webinar, “Why the Collision Industry Should Be Interested in V2X,” to dip into the emerging world of Vehicle to Everything (V2X) technology and how it could affect road safety, traffic management and even collision repair.

The presentation was led by Arif Rafiq, a transportation industry expert who advises governments on systems developed to manage roads, highways and public transportation infrastructure.

Rafiq spoke about why V2X technology will be critical to the future of mobility, including how it could be applied to collision repair.

Rafiq said V2X is communication between a vehicle — which could be a car, truck or even a burrito delivery robot — and everything around it — other vehicles and the local transportation infrastructure. C-V2X is when the vehicle receives and sends data through the cellular network.

He opened with an imagined scenario: two autonomous cars driving side by side on a road, approaching an intersection.

Currently, if those cars are built by different manufacturers, “they may have different perspectives on what actually is at that intersection” based on data collected by other cars made by their respective manufacturers. One might think it’s a regular intersection, but the other could be more up-todate and know it’s now a roundabout with an active work zone.

“Now these two vehicles have different perspectives of that same intersection,” Rafiq said. “What’s going to happen when they both reach that intersection? That depends on the intelligence built into the cars. The risk to the occupants has now gone up.”

Rafiq said that scenario is one he is working to avoid in the future, as autonomous vehicles become more common.

He shared a screenshot of what an autonomous car “sees” for data collection, not navigation, which it sends “home” to be used to build an HD map that all the same manufacturers’ cars then use for navigation.

“A tremendous amount of data needs to be stored to track every road and intersection in the world,” Rafiq said.

There are three options.

First, all of that data could be stored directly in the vehicle, but it quickly becomes outdated.

Second, the car can sense and interpret all data in real time, similar to an image Rafiq shared from a traffic camera identifying cars, large trucks and people in different colored boxes.

But that technology is not perfect and doesn’t always recognize everything correctly.

Third, the data could be delivered to the vehicle as needed.

Rafiq said he thinks the third option “has a lot of merit.” He referred to the earlier example of the two autonomous cars approaching an intersection that recently became a roundabout.

How V2X Could Affect Collision Repair

One viewer asked if V2X could be used to validate ADAS calibrations are done correctly.

Rafiq said he thinks it could get there, but right now there is not a place for that kind of data in the current message subset within V2X data, which include those related to basic

If the local government supplied that information on a platform open to the public, it could theoretically be accessible to connected vehicles as

safety, local geography, signal phase and timing, road safety, emergency vehicle alerts and more.

“It’s constantly being updated,” Rafiq

saying it will eliminate them,” Rafiq said. He said there will be an aftermarket to serve V2X data, and the data could be used to treat collisions that do happen with more intelligence.

For example: if an ADAS feature quit working because it was too foggy, leading to a collision, that data could be sent to both the OEM and the local government that’s maintaining the “digital twin,” which could useful for improving autonomous driving.

The data could also potentially provide a detailed audit of a collision, like a “black box” on an airplane.

That information could help quickly identify the precise repairs needed, which could streamline the insurance claims process. It could even be used to optimize health care for people involved the collision.

One hurdle that needs to be cleared before V2X becomes more common is ensuring the security of vehicles owners’ Personally Identifiable Information (PII), which Rafiq said is

Should Independent Body Shops Care About Growing State-Level Push For Consumer Privacy?

By Paul Hughes Autobody News

A push by individual states to regulate consumer information collected by businesses isn’t yet touching smaller body shops and collision centers, but efforts are gaining steam and there are great reasons for indie operators to know and prepare for local laws.

Act in 2018, and two years later, voters approved a proposition that expanded on CCPA. All regulations were effective by January 2023.

Other states are joining in.

Six states’ laws will have gone into effect this year and last, when Montana’s begins Oct. 1, according to nonprofit International Association of Privacy Professionals (IAPP). Nine

California was first with legislation often presented as “privacy protection” bills dealing with individuals’ data. The state passed the California Consumer Privacy

more are slated to hit in 2025 — six of these by January — with three more in January 2026. Four more states have active bills.

Only about one-fourth of states

haven’t tried to enact privacy legislation.

There is currently no national law, but that’s in the works as well.

Does Privacy Matter to Collision Centers?

“What’s really changing is the statelevel stuff,” said Brad Miller, head of legal at Utah-based ComplyAuto, which develops software to aid companies’ compliance with state and federal regulations.

The changes are more than just new legislation itself. Because it’s happening — or not — one-by-one, there are differences within and among various laws. Multiplied by dozens of states, it gets complicated.

Miller said “privacy” generally refers to “non-public personal information” — but not just the usual suspects. It involves obvious datapoints — insurance, driver licenses, Social Security numbers — but “anything personally identifiable” as well.

Some states let businesses correct a problem before they’re punished; some don’t.

“There are lots of layers to this, and all the laws are different,” Miller said.

A common approach seems to

be good for most shops: smallbusiness exemptions, which also differ state-to-state.

California’s law applies to businesses with more than $25 million in gross annual revenue or information on at least 100,000 residents or households.

Most independent body shops aren’t touched. MSOs and dealerships with shops likely are, and online privacy adds a whole ‘nother slew of considerations.

How Independent Body Shops Are Handling Data

Roberto Baires owns Micro Tech Resources IT in Northern California. Among his clients are 100 or so body shops. More are concerned with the long-time CARFAX issue — past repairs not being in a vehicle history — than with the state’s stringent customer data privacy rules.

He stressed the limited information shops hold, noting, “customer data they see is in the estimating software, insurance companies, parts procurement, credit cards — they’re the ones managing it.”

“We have to keep some information for lifetime warranty repairs,” said Tiffany Silva, who

co-owns Accurate Auto Body in Richmond, CA. But for the most part, “there’s nothing for me to hold.”

“Shops hold some data, but more of it is physical,” Baires added.

“I’m ‘old-school,’” said Ken Pike , owner of Ken’s Custom Auto Body in Marysville, CA. He collects a name and phone number for estimating but doesn’t keep any customer data. “I charge their credit card and that’s it.”

He’s never had a customer ask about their information.

Silva said her shop has policies in place — where it can exist, what happens if an employee takes a photo of a vehicle — developed with an attorney and IT. “We have data and we protect the data, but it doesn’t come up.”

Miller said if the law applies to a shop, it overlaps with much standard practice, apart from the exemptions.

The ABCs of Consumer Data and Customer Interaction

And Silva’s policy approach is a good step even for shops that don’t strictly “need” it.

With the industry’s increasing complexity, technological advances and customer privacy and data concerns, there are good reasons to be ready to act.

Acquisitions: If a shop might ever

be sold, it’s best to have operations as pristine as possible. Big buyers will have their own method, of course, but keeping data collection clean and in compliance is never bad.

Breaches: Shop relationships with insurance companies, suppliers and dealers, among others, are at risk for hacking, ransomware and other cybersecurity issues. And these attacks are only expected to increase.

Customers: A formal policy developed with the right people and communicated to anyone who walks in the door ups the body shop’s game. It speaks to professionalism, customer care and a strong work ethic.

A policy defines relationships with consumers, third parties and the state. It prevents problems and prepares a shop for service today, and tomorrow.

Miller said federal legislation frequently stalls over particulars; but if not inevitable, it’s also not impossible. And without one, the news is more complex than good, since states passing a different law every time doesn’t make compliance any easier.

“The auto body industry is having to deal with this,” he said. “And new regulations are coming.”

said. Despite election timing, there are “a lot of tax benefits to buying equipment in the fourth quarter.”

Equipment Purchases

To be certified to repair their vehicles, some OEMs require body shops to have specific types of equipment, whether it be certain welders, frame straighteners or measuring systems, to name a few.

Companies may have to invest as much as $50,000 to $150,000 in equipment if they want to work on a particular car brand, Knowlton said.

Buying equipment in the fourth quarter of a calendar year, just before tax season, can bring timely benefits.

Internal Revenue Code Section 179 allows businesses to claim lower current-year tax liability for depreciable assets, including equipment, instead of capitalizing an asset and depreciating it over time in future tax years.

“My guess is that the capital equipment people see a pretty good bump here through the year, irrespective of the election,” Knowlton added.

Though new equipment — along with real estate — is a major area that

collision repairers seek financing for, it can be “hit or miss,” as not every shop feels the need to make frequent or higher-end investments in new equipment, Lane said. That said, the last time frame the collision repair industry found itself in a lower rate environment — during the heat of COVID in 2020 — shops borrowed substantially, including for equipment investments, Rich said.

“They got [Small Business Administration] loans during COVID that when rates were really, really, really low, a lot of collision repair entrepreneurs, fortunately, recognized that this is too good to pass up,” she said.

The Federal Funds Rate sat at 0% to 0.25% in March 2020. It didn’t rise until March 2022, to 0.25% to 0.50%.

Even though rates are nowhere near as low as COVID rates, this is the first rate cut in four years, and anytime there’s a business rate cut, it increases business confidence, Knowlton said.

“Lowering and decreasing rates creates some certainty, which allows companies to look forward a little further,” he added. “Whether it’s the brownfield investments or investing in equipment or buying that shop in the next town, it just makes that path a little smoother and that decision a little easier to make.”

Joe Hudson’s Expands Southeast Presence With Acquisitions in Georgia, MS

Joe Hudson’s Collision Center expanded its influence in the Southeast by acquiring RCI Collision in Warner Robins, GA; Butch’s Body Shop by RCI in Dublin, GA; and Bob’s Paint and Auto Body in Columbus, MS.

The move strengthens the company’s presence in Georgia and Mississippi, promising improved customer service and community ties.

Established in 1989 and headquartered in Montgomery, AL, Joe Hudson’s Collision Center now has more than 230 collision repair facilities across the southeastern U.S.

“Our goal is to broaden our market reach and strengthen our relationships with the communities we serve,” said Brant Wilson, CEO of Joe Hudson’s Collision Center. “Georgia has proven to be a successful market for us, and the addition of RCI Collision and Butch’s Body Shop by RCI will enable us to fill service availability gaps and connect our eastern and western locations more effectively. Furthermore,

acquiring Bob’s Paint and Auto Body will allow us to better serve the Columbus, MS, market, enhance our regional capabilities and build deeper connections with local customers. These acquisitions are a key component of our long-term growth strategy, aimed at increasing our market penetration and reinforcing our dedication to customer satisfaction.”

“Our goal is to broaden our market reach and strengthen our relationships with the communities we serve,”

BRANT WILSON CEO OF JOE HUDSON’S COLLISION CENTER

“We are privileged to welcome these three exceptional collision repair companies into our organization,” said Cameron Dickson, COO at Joe Hudson’s.

“Over the years, these locations have built strong reputations for repair quality, customer service and community engagement. With the integration of these

locations, we are well-positioned to enhance our service delivery, streamline operations and reinforce our regional presence. We look forward to the benefits this expansion will bring and the continued value it will provide to our customers and their communities.”

“As we welcome these new locations into our family, we’re excited about the opportunity to integrate our new team members into our existing network,” said Wendy Patrick, chief administrative officer. “By acquiring locations within and adjacent to our current markets, we can provide streamlined training and support, ensuring that everyone is aligned with our core values and operational standards. This integration not only makes the onboarding process smoother but also opens up additional growth opportunities for our new employees. They will benefit from a well-established support system and the chance to advance their careers within a thriving environment.”

BendPak Bringing EightArmed Car Lift To SEMA

Shop owners, technicians and enthusiasts will get their first look at BendPak’s groundbreaking new Octa-Flex Series two-post car lift at the 2024 SEMA Show. This unique lift has eight fully adjustable, telescoping swing arms to let technicians use a two-post lift in ways they could only dream of in the past, like tackling cab-off repairs or removing heavy components such as EV battery packs, drivetrains and wheel assemblies without additional equipment or a second tech. The Octa-Flex EV12DPS prototype will be displayed in BendPak’s flagship outdoor booth #81210 in the Silver Lot. This expansive booth, in a slightly different location than usual due to convention center construction, also features additional BendPak service and parking lifts, a full line of portable lifts from QuickJack and MaxJax, the latest Cool Boss evaporative coolers, and the versatile JackPak collection of portable power packs. It’s a onestop location to explore and order equipment from across the BendPak universe – taking advantage of exclusive SEMA Show specials.

Can’t-Miss Tools To Check Out At 2024 SEMA Show

By Toby Chess Autobody News

It has been nearly a year since I found some new and improved tools at the last SEMA Show. If you are at SEMA this year, take a few minutes to check out these tools in person.

I purchase these tools, most of the time, and I do not get paid or take any compensation from sales. There are competitors with similar items and you may want to do your homework before purchasing. If anyone has a similar product, send me an email; I would like to check it out. Moreover, if anyone has a neat new tool, I would like to hear from you.

Car-Rep aka Wise Spray

I recently wrote about Car-Rep’s 2K Epoxy Primer. It is a true 2K material. When one sprays the product, moisture in the air will mix with the catalyst, and that starts the crosslinking process. The product has a 3-year shelf life and it is at the right price point.

Since the last time I wrote about this new technology, the company came out with two different products, a top coat (three colors) and DTM primers (five colors). Both are 2K epoxies.

Requiring no primers or clear

coats, Car-Rep 2K Top Coats are easy to apply and are the only 2K Top Coats which require no mixing and feature unlimited pot life. They are available in high gloss jet black, satin jet black and high gloss pure white.

The other products from Car-Rep are OEM match DTM primers. Same technology, 2K epoxy primer. There are five colors to match OEM colors: light green, olive green, black, white and gray.

Polyvance

Polyvance has a hot air welder for $600. It’s a great starter tool for a shop that has no plastic bumper welder. They also have a bumper pliers kit that makes repairing broken

tabs much easier.

Technicians often have difficulty restoring the correct dimensions of the slot, which is critical for proper bumper installation. This kit will allow the tech to quickly and accurately repairs torn slots and recessed bolt holes in automotive bumpers.

Astro Pneumatic

Last year, I showed a drill bit set from Astro Pneumatic. Everyone I have shown them to has gone to Amazon and purchased the kit.

At the same time, I purchased their in-line 4-inch Quick Change Cut-Off tool. It is one of the easiest tools to use to cut a straight line. (I also have the long corner grinder from Dent Fix, and it does an excellent job of cutting along a line.) It has a great price point — less than $80 at Amazon — and

you do not have to think twice about purchasing it.

I also purchased Astro’s #936 Onyx Gear Driven Heavy Duty Air Saw. I have seen the Snap-on air saw used on the structural steel test and it is one of the best, but it is a little pricey. The Astro air saw is just as good and sells for less than $150 on Amazon. I found a substitute cut-off disc at SEMA from Millner-Haufen Tool Co. I featured this 4-inch cut-off wheel in my SEMA tools report a few years ago. It is still cutting like when it was new. I used my Astro 4-inch cut-off tool with the Millner-Haufen 4-inch disc to cut some 3/16 metal and it sliced right through it. I also used it on a cinder block, as I was installing a fence extender on a cinder block wall. It also has a 40 grit surface on the side of the disc for grinding. Best of all, it has a lifetime warranty.

Reliable Automotive Equipment

My next item is a specialty center punch for self-piercing rivets (SPRs). Some manufacturers use a forming die that leaves the backside of the rivet flat, with no center dimple. When using an extractor die set like this one, it is extremely important to center the point of the extractor die in the middle of the backside SPR. If it is not centered, there

Astro Pneumatic’s #936 Onyx Gear Driven Heavy Duty Air Saw.

is a good chance of breaking the die, and they are not cheap.

A center punch tool was designed to remove SPRs. One end fits over a 3 mm installed SPR and the other end fits over a 5 mm rivet. The hardened spike is hammered on the end, forming a dimple in the backside of the SPR. Now the extraction tool spike is placed over the rivet and pushed out the front. I purchased mine from Reliable Automotive Equipment.

Majestic Hammer & Dollies

Next, a tool every technician should have in their tool box: a leather leadshot dolly. When hammering from the back side of the part, this dead blow, non-marring dolly will not leave any of the panel damage you would get with a traditional steel dolly. Mine is made by Majestic Hammer & Dollies, and I purchased it from online retailer Tool Source for less than $70.

KECO

It is amazing how one company changed the way we repair major panel damage. I was with Dale Matsumoto in Hawaii in 2018 when he told me about KECO. He said he could pull out large dents with glue. I thought he was crazy until I watched him use the glue tab system to pull out a large dent on a Toyota Tacoma without removing the paint.

I was at SEMA in 2018 and found Chris White, owner of KECO, in a small booth in the middle of nowhere. I bought the kit — I still have it — and proceeded to make it a Kool Tools of SEMA 2018 after using it on a number of vehicles. Six years later, a couple of OEM certification programs state that a glue dent pulling system equivalent to KECO’s is required.

In my opinion, there a number of very good glue dent pulling systems, but KECO is at the top today and here is what sets them apart. KECO has three fulltime engineers designing and producing new equipment, tools and tabs. The company will do extensive testing before releasing the products. They give a lifetime warranty on most of their tabs.

Finally, they listen. They have a tool that will pull out door, fender and quarter panel lips. I pulled out a quarter panel with the leverage bar and proceeded to bend the steel part of the puller. I welded a spline on it and it worked OK, but I told the company it needed to be stronger and have a larger lip. I received the updated version and it still would bend. Again I told Chris White, and he sent a new one to try. It worked like a charm.

Enough of the background info. I want to show a couple of new KECO tools.

The first tool is the GPR Star Vortex

Cooler. The biggest complaint I get from techs is it takes too much time for the glue to set up for pulling. This tool will accelerate the glue set-up time to about two minutes. It has a magnet attachment so it can be set up without anyone holding it. It only works for steel parts. The only caution is the glue can get too cold and fracture, which leads to a tab failure.

The other tool is the KECO K-Tower. There are a number of these new towers that use air to create a vacuum seal to hold the tower in place for pulling. You have the GUNIWHEEL Fast Puller XL, GYS’s AirFix Draw Aligner, Pro Spot International’s Vac-U-Pull, Spanesi and KECO’s.

I have tried all of the above towers, and each work as advertised. What set apart KECO from the rest is its tower articulates to the left and right, whereas the other units are secured to the base and cannot be moved once the tower arm is tightened down. The articulating tower gives the tech a more precise pull that is faster than the stationary towers. It also has a larger base, and I was told this allows for a stronger pull. KECO has a number of accessories that give the unit more versatility. There are a number of new tools and products that will help you speed up production and improve the quality of collision repairs. If you have ideas, procedures or tools that will make a difference, send them to me and I will get it out to all the readers of Autobody News. Remember we are all in the same boat and if we can help each other, the consumer will be the winner. Have a great time at SEMA. Toby Chess can be reached via email at tcspeedster@gmail.com.

FLORIDA

MIAMI LAKES CHRYSLER DODGE JEEP RAM 16600 NW 57th Ave Miami Lakes, FL 33014 (305) 556-2777

MISSISSIPPI

MAC HAIK CHRYSLER DODGE JEEP RAM 5395 I-55 North Jackson, MS 39206 (601) 500-5555

SOUTH CAROLINA

SPARTANBURG CHRYSLER DODGE JEEP RAM 8200 Fairforest Road Spartanburg, SC 29303 (800)

10671 Patriot Hwy. Fredericksburg, VA 22408 Phone: (540) 735-1130 Fax: (540) 891-9685 WEST VIRGINIA

102 Orchard Park Road Hurricane, WV 25526 (800) 888-8264

Fai Zhen from MA’s Auto Collision uses the KECO GPR Star Vortex Cooler.

KECO GPR Star Vortex Cooler.

Why MSOs Are Stepping Up To Purchase Dealership Collision Centers

By Elizabeth Crumbly Autobody News

Sales of dealership collision centers pose multifaceted benefits, both for dealerships selling and the MSOs that often purchase. These changes aren’t without challenges, but a consolidating industry means these moves will likely become more common in coming years.

“It’s a slow and steady trend that we’ve seen for many years,” said Madeleine Roberts Rich, senior associate with Focus Advisors, a firm that represents MSO owners as they grow or exit. “The reason is that the collision repair industry is consolidating. As we’ve seen, there’s

a handful of consolidators that are establishing more and more market share primarily through acquisitions.”

When Dealerships Sell

So, why are dealerships selling? It’s primarily to streamline operations and enhance focus on automotive sales, reducing the added management needs for collision repair operations. Keeping up with technology and the hiring competition for highly trained technicians can be prohibitive in keeping a shop going.

“The game is much more expensive than it has been in the past, and the tech workforce really drives volumes,” explained David Roberts, Focus Advisors founder and managing director. “So, if you don’t have a steady volume of vehicles going through your collision repair shop, people are going to look around where they can make more money, and they’ll almost invariably find an MSO in the area that is doing more work.”

And dealerships that find a buyer free up significant funds.

“They have cash that they can then use as capital to invest in their core competency if it’s expanding their existing dealership operations in place or then trying to expand to a new location,” Rich explained. “They

have freed up cash in this liquidity event, and in a high interest rate environment like we’re in, access to cash can be quite important.”

There’s also built-in opportunity for sale of more parts for dealerships as they continue to funnel repairs from vehicle buyers toward shops they’ve sold. This scenario is beneficial when a dealership sells the shop but keeps the real estate in a long-term lease situation.

One drawback Roberts noted in that scenario is that buyers will likely extract regular repair discounts from a dealer, but the volume of business can make up for that factor. Indeed, Rich said, lifetime customers often

mean lifetime servicing of a vehicle or multiple vehicles: It’s one more reason to make sure a collision center is in capable hands.

When MSOs Buy MSOs looking to purchase dealership collision centers get the benefits of having a staffed location with ready equipment, and ostensibly, they start out with dealership customers. That doesn’t mean there aren’t potential hurdles, though.

These purchasers, explained Roberts, need to be sure they’ll really have access to a steady pipeline of customers as dealerships’ modes of operation often differ from those of shops that have been historically focused strictly on repair.

“If you’re an MSO buying a dealer shop, you really do have to have your act together,” Roberts said. “The dealer is trying to manage a bunch of different things, and if they’ve got a bunch of different nameplates and they’re really into selling new and used cars and servicing those cars, then getting access to repairable vehicles today comes much more through insurance companies. And most dealers don’t have arrangements with insurance companies in which they participate in direct repair programs.”

Madeleine Roberts Rich of Focus Advisors

David Roberts of Focus Advisors

Making sure a shop is the right fit is also important for an MSO looking to purchase.

Joe Hudson’s Collision Center, an-Alabama-based MSO, which recently entered the dealership shop acquisition trend by buying Bedford Nissan Collision Center in Bedford, OH, is an example of this factor. Bedford Nissan’s existing certifications made it a fit for acquisition, Joe Hudson’s Chief Operating Officer Cameron Dickson explained in a press release.

“Identifying growth opportunities that align with our standards for quality and outstanding customer service is crucial,” Dickson said. “Bedford Nissan Collision Center’s numerous OEM certifications and I-CAR Gold Class recognition make it an ideal partner. This acquisition allows us to quickly integrate our operations and continue delivering the top-notch service our customers have come to expect.”

The Transition

Dealership sales are on the rise right now, according to a report released in June by Kerrigan Advisors, an auto buy/sell advisory firm. The first quarter of this year, the firm reported, saw a 38% rise in dealership sales compared to first quarter of 2023. It’s important for dealers to

consider how their collision operations factor into these sales, and transition of body shop ownership can happen in a number of ways. Some dealers just want to be out of the game altogether, and that can mean moving the shop off their premises.

“They just want to sell the business,” Roberts explained. “They don’t get as much for the business, but they repurpose the body shop into more service space.”

In this case, he said, a buying MSO might move the business, its equipment and its employees to an existing shop that has capacity.

Dealers will also participate in the aforementioned long-term lease situation. This, Rich pointed out, makes for a built-in credit tenant and a lowered capitalization rate. Lower cap rates (annual net operating income divided by market value) indicate less risk and higher value for commercial real estate.

But how does a dealership reach this point? Long-term lease rates, Rich explained, are based as a percentage of trailing 12-month sales for the body shop. The valuation of the body shop itself is then based on adjusted EBITDA (earnings before interest, taxes, depreciation and amortization) figures.

Getting accurate numbers

through this process is especially important as the selling of a business is a bespoke thing, and it’s a process worth pursuing fully, Rich said.

“What we, as investment bankers, hate to see is for owner operators to sell themselves short by not fully understanding what their true adjusted EBITDA is,” she explained. “Because with selling a business, it’s not like selling a house where there’s tons of records on Redfin or Zillow.”

Some dealers want to sell the whole business, dealership and all, and in those cases, it can be beneficial to look at chunking up the transaction, as selling the body shop separately can result in more money, Roberts contended.

Separating the body shop from the rest of the sale allows consolidators and MSOs to step into the equation. Sometimes in

these situations, the real estate changes hands, and there’s a lease opportunity for the new owner. Body shop acquisition may not be a priority for another dealer looking to acquire the business, so the profit opportunity can be less there.

“If they just want to sell their body shop, the process is different because dealers are always being approached by other dealers that want to buy to bulk up in their market, but they’re not often being approached by people that want to buy their body shop,” Roberts explained.

Doubling Down

However a sale takes place, offloading a body shop can be relief for a dealership owner looking to free up cash. And it’s a way for dealers to simplify operations and for MSOs to step up and do what they do best.

“The body shop business and the business of selling cars are very different, and they’re both getting a lot more complex,” Rich said. “So, splitting one’s focus, especially if the body shop, as involved as it is, is only a very small fraction of your annual sales — it’s just going to pull focus. Doubling down on what you do best and then getting a best-in-class operator to run the body shop side is an advantage.”

There are also several reasons for dealership owners to offload body shops

3D Printing Offers Collision Repair Innovative Option For Parts, Shipping, Design

By Elizabeth Crumbly, Autobody News

Automotive repair is benefitting from 3D printing in myriad ways, from the busting of supply chain blockages to innovations in parts and tools.

Steven Corzyk, a mobility application engineer with Hewlett Packard, appeared on AirPro Diagnostics’ TechTalk360 webinar series to talk about the benefits this technology brings to the industry. The process of 3D printing, he explained, is a cost-effective alternative to injection molding, in which molten material is injected into a mold before cooling and solidifying.

Printing can bring about a freer design process without a need for the die drawing and undercuts injection

molding uses. Cost reduction is another big benefit. Printers, Corzyk said, can mean rapid, less costly prototyping and the ability for short runs. And time to market can also see significant improvement from printers, which can move that process from weeks to days with rapid production and adaptation of parts for changing product lines. Printer users can quickly move from design reviews to part reviews, too, he said, thereby reducing product transport time.

Molds vs. Printers

Some aspects of injection molds make printers look especially flexible. The long lead times injection molding often require eventually affect end customers. Molds lost or damaged

during shipping slow the process even more, Corzyk pointed out. Aftermarket supplies, which require stock storage, can trigger supply chain disruption when out of stock

waste. There’s the possibility for lots of variations bespoke to customer needs with no additional tooling, he said, and there’s less waste in printing than in molding. Printing,

triggers are tripped, and besides that, he contended, new design iterations and improvements for molds are expensive.

The speedy, adjustable properties of printing, by contrast, can have a positive effect on supply chains, Corzyk said. And they offer sustainability in the form of lightweight and efficient part design optimized for function, better performance, reduced process

he pointed out, also means fewer assembly requirements and thereby reduced usage of adhesives.

Types of 3D Products

3D products run a gamut that can help in processes ranging from transport to design to production. Parts that need to be contained in a specific way, Corzyk said, can benefit from custom-printed packing, storage

l CONTINUED ON PAGE 41

I-CAR Named Apprenticeship Hub

I-CAR has been designated as a Registered Apprenticeship Hub and is the recipient of a substantial Apprenticeship Building America grant, part of the U.S. Department of Labor’s Investing in America program, aimed at expanding apprenticeship opportunities in highdemand fields.

The $7 million grant, to be disbursed over four years, will enable I-CAR to establish new Registered Apprenticeship Programs (RAPs) and engage with repair centers either independently or through collaborations with I-CAR Academy Schools. These efforts are expected to standardize and elevate the training available in the collision repair industry to levels seen in other skilled trades. The introduction of these apprenticeship programs comes at a critical time. The collision repair industry is currently grappling with a significant shortage of qualified technicians, exacerbated by the increasing complexity of modern vehicles and a general decline in interest in trade careers. This gap has had detrimental effects on both repair shop efficiency and consumer safety.

3D printers can aid in the production of OEM-certified parts.

3D printers manufacture parts by using layers of powder that are heated past melting point before fusing with the layers below them.

ALABAMA

Serra Kia

Birmingham

800-426-4351

205-856-6600

M- F 8am-5pm jessica@serraparts.com

FLORIDA

Deland Kia

Deland

386-734-7800 (386) 822-9278 Fax parts@delandkia.net www.delandkia.net FREE Local Delivery

Kia of Orange Park Jacksonville 904-771-6078 (904) 674-0221 Fax

M-F 7-6; Sat 8-5 dcarr@kiaoforangepark.com

Kia of Vero Beach Vero Beach

772-770-9887 (772) 562-0732 Fax M-F 7:30-5 mikep@toyotaofvero.com

Miami Lakes Kia

Miami Lakes 305-556-2777

305-891-5555 M-F 8-6

Rick Case Kia Sunrise 954-364-3079

M-F 7:30-6; Sat 8-5 troythomas@rickcase.com

GEORGIA

Sons Kia

McDonough 678-783-2193 (678) 783-2298 Fax

M-F 7:30-6; Sat 8-4

SO. CAROLINA

Kia of Greenville Greenville 864-516-2700 (864) 520-8981 Fax aburgos@kiaofgreenville.net

VIRGINIA

CMA’S Colonial Kia Chesterfield 804-431-3838 (804) 431-1646 Fax M-F 8-5; Sat 8-1 dwomack@colonial.cmacars.com

Ourisman Kia of Fairfax Fairfax (703) 934-8877 x227, 237 or 254 M-F 7am-7pm; Sat 8am-5pm mmunn@ourismancars.com www.ourismankiaoffairfax.com

*Kia Genuine replacement parts sold but not installed by an Authorized Kia Dealer are covered for 12 months from purchase date, regardless of mileage, for the part only, and any labor charge is the consumer’s responsibility.

Stacey

Auto Additive on Track To Provide High-Quality, OEM-Grade 3D-Printed Parts, Tools & Jigs

Since launching this year, Auto Additive has positioned itself as a collision repair specialist provider of high-quality, OEM-grade 3D-printed parts, tools and jigs for the automotive repair and customization industry. The company is working with several launch clients in the collision industry from headlight reconditioners, product suppliers and collision repairers to understand the opportunity in these sectors and how 3D printing can help the repair process.

“We have made great progress and already co-developed a number of patented tools and jigs for our clients and are working on some inspiring and ground-breaking solutions that will help transform sectors of auto repair, services and additive manufacturing,” said Harold Sears, head of Auto Additive’s Strategic Advisory Council.

The company’s services include 3D scanning, product engineering, testing and CAD (digital parts) supply chain management.

The company is in the process

of setting up the digital additive manufacturing infrastructure, in the form of “Digital Rails” which will allow any provider with a digital catalog to print with Auto Additive worldwide on demand and with confidence.

“This enables us to provide an industry-first solution and print customer parts on demand anywhere in the world through transparent, blockchain-driven software, providing ultimate client IP protection,” said Sears.

Audi Part Professionals are experts on collision parts, replacement components and mechanical items.

range of clientele, such as OEMs, aftermarket suppliers, collision groups and specialty collision supply businesses.

“We are not a direct parts or product supplier; we provide our services to current parts, tools and consumable suppliers and work with them to solve their and the industry’s needs” through additive innovation, explained Trajcevska.

Auto Additive’s strategic advisory council, led by industry veteran Sears and featuring representatives from GM, HP, I-CAR, Boyd Group, Tesla, SEM / PPG and more, ensures the company stays at the cutting edge of technological and industry advancements.

“Through collaborations with industry leaders like HP 3D Printing, GKN Forcast 3D and Assembrix, Auto Additive can deliver advanced, sustainable and reliable 3D printing solutions tailored to the needs of the automotive sector,” said Diana Trajcevska , the company’s director of digital innovation.

The goal is to service and open new opportunities for a broader

ALABAMA

Audi Birmingham Irondale

205.986.7410

205.986.7438 Fax

“We work together to determine best practices and pathways for utilizing 3D printing in the collision repair process and parts supply that will benefit everyone involved,” said Mario Dimovski, a member of the strategic advisory council.

Trajcevska shared two projects that Auto Additive has collaborated on. Auto Additive collaborated with

GEORGIA

Audi Gwinnett Duluth

678.258.2535

770.476.9311 Fax

M-F 7am-6pm; Sat 8am-4pm daniel.williford@audiofbirmingham.com www.audiofbirmingham.com

FLORIDA

Audi North Miami North Miami Beach

305.952.5960

305.944.4009 Fax

M-Sat 8am-6pm amartinez@audinorthmiami.com www.audinorthmiami.com

Audi West Palm Beach West Palm Beach

866.441.3309

561.615.4175

Auto Additive team members and partners include, pictured, left to right: Harold Sears, head of Auto Additive’s Strategic Advisory Council; Peter McAninch, director of Plastrepair EU Limited; Lior Polak, CEO and co-founder of Assembrix; Michael LoPrete, director of process and industry relations for 4Plastic; Brian Driehorst, chief revenue officer at Headlights.com; Bahadir Dogan, global application engineering manager at 3M; and Steve Corzyk, additive application engineer at HP. Order Audi Genuine Parts from

561.615.4179 Fax

M-F 7:30am-7pm; Sat 8am-5pm parts@audiwpb.com www.audiwpb.com

M-F 7:30am-6pm parts@audigwinnett.com www.audigwinnett.com

Regardless of the age of your customer’s Audi, Audi dealers have access to over 200,000 part numbers and are supported by a nationwide network of distribution centers to help ensure non-stocked parts are delivered the next day.

4Plastics to develop the Plastic Repair Push Tool using advanced 3D printing technology. Trajcevska said the tool addresses challenges in repairing impacts on bumper covers by offering a precise, efficient solution.

“The tool’s innovative design and durable material significantly improve repair quality and reduce labor time and costs,” he noted.

To tackle the issue of damaged or missing tabs on headlights, Auto Additive, in collaboration with Headlights.com and Forcast 3D, introduced 3D printed weld-on PP tabs.

“These tabs can be welded directly onto headlights, matching the original OEM material’s durability and reducing the need for costly replacements,” explained Trajcevska. “This innovation will enable repair shops to restore more headlights with broken tabs efficiently, cutting costs and minimizing environmental impact by reducing landfill waste.”

“It’s important to understand that Auto Additive is not doing anything new,” said Sears. “We are playing the role of a fast follower, bridging the gap of 3D printing between vehicle OEMs who are 3D printing parts now and various other industries that have already adopted this technology for

increasing and include the U.S. Navy, defense, rail, aviation, agriculture, aerospace, appliances and sporting goods manufacturers.

“Our mission is to bring the same quality and materials used by OEMs in their 3D printing of parts for new cars in the manufacturing process to the automotive repair and replacement market,” said Sears.

“We also need to consider that Auto Additive’s solutions will have an enormous impact on the environment and sustainability,” added Trajcevska.

“This is a core value at Auto Additive.”

By using additive manufacturing processes, Auto Additive hopes to enable customers and the industry to reduce waste by diverting previously non-repairable parts from landfills and lowering the carbon footprint associated with traditional manufacturing methods.

Auto Additive has also recently become a member AMGTA (Additive Manufacturing Green Trade Association), joining a string of global 3D printing companies promoting sustainability in 3D printing.

“This commitment to sustainability is reflected in our mission and it will form one of our key reporting metrics, providing clients with waste diversion and carbon offset

3D Printing Offers

and transport materials like cardboard or molded foam. Visual prototypes can help in design processes, and short runs of aftermarket parts can aid in repairs on out-of-production vehicles.

Printing of tools, he said, is particularly influential in standardization of procedure in repair of common or recurring problems in car models. 3D printers, he said, can produce elastomeric materials, which are non-marring — an especially important property for tools.

While the production cost is generally lower than with molds, and processes can be flexible, 3D printing comes with its drawbacks. Most printed parts, Corzyk pointed out, are gray, although some can be made in white. These colors are fine for most tools or fixtures, but they aren’t acceptable by OEM Class A standards. Dying, painting or finishing of parts, he said, is a way around this factor.

How 3D Printing Works

The printing process uses a layering effect. Inside a 3D printer, a thin layer of powder is spread across the build chamber. When the print heads come across, they use black ink, which promotes energy absorption.

The following dealerships are eager to serve your needs. Call your local Subaru collision parts specialist today!

Stivers Decatur

Subaru

Decatur (404) 248-1888

Fax (404) 425-5800

Mon.-Fri. 7:30-6; Sat. 9-5 dway@stiversonline.com www.stiverssubaru.com

Subaru of Gwinnett

Duluth (678) 475-7245

Mon.-Fri. 8-5; Sat. 8-3 parts@subaruofgwinnett.com www.subaruofgwinnett.com

Troncalli Subaru

Cumming (770) 889-8951

Direct (678) 341-4220 Fax (678) 341-4221 www.troncallisubaru.com

As the powder passes melting temperature, it fuses to the layer below it. This process, Corzyk said, happens hundreds of times, and the resulting item is encased in excess powder which is captured with a vacuum. HP printers, he said, have produced parts used by major auto manufacturers. An alignment assembly tool has allowed Volkswagen to install badges on the front of its vehicles more efficiently. Ford has used printed wax sealant nozzles, and Peugeot offers a printed elastomer car accessory.

Choosing a 3D Printer

When choosing a printer, Corzyk stressed, it’s important to look for a legitimate brand.

HP, as an example, he said, has put significant effort into pursuing certifications for approved parts when it comes to factors like flammability, dimensional accuracy and cytotoxicity. When individuals with non-OEM certified printers make cheap items, buyers may not know they’re not legitimate choices for spare parts and in-plant usage. Toplevel OEMs, Corzyk said, are taking counterfeits seriously and are coming up with ways to make printed parts verifiable. Since parts are printed layer by layer, a QR code or serial number can be embedded. UV ink can also be a way to identify counterfeit parts with blacklight-visible images.

Jim Armstrong

Subaru

Hickory (888) 905-6135 (828) 322-9372 opt 5 Mon.-Fri. 8-5

parts@jimarmstrongsubaru.com www.jimarmstrongsubaru.com

Parkway Subaru

Wilmington (800) 424-9434 (910) 793-8710 Fax Mon.-Fri. 7-6; Sat. 8-2

GEORGIA NO. CAROLINA

Arkansas MSO Owners Find Out How Much Work Goes Into Selling To Consolidator

By Paul Hughes Autobody News

Sometimes a “nice problem to have” is not quite true.

Two Steve Halls — father and son — and son and brother Shaun Hall sold their four-unit MSO, Steve’s Auto Body, in northeastern Arkansas to consolidator Joe Hudson’s Collision Centers in September 2023. The four shops were in Marion, Jonesboro, Paragould and Searcy. In a way, they ended up like eight shops, and, in an unhelpful way, like just one.

in five years, between 2010 and 2015. At its sale, the four sites — regularly outgrowing original spaces; renovated; and adding land, buildings and shop space — totaled some 120,000 square feet, 55 employees and north of $13 million in annual sales.

The brothers joined as growth began.

Opening and expanding multiple shops fast, usually doubling space, means four were like eight. Combining numbers across the four means you could see them as one operation.

Steve Hall Sr. had the first one in Marion by 1999. The others came

Which became a problem.

Need for Speed?

“We just didn’t know,” Steve Hall Jr. said.

The business was growing, new hires coming onboard, technology spawned new equipment, there were loans for land and building buys —and money was coming in.

The MSO saw 15% gross sales growth annually for the five years from 2018 leading to the exit, Hall Jr. said.

“We were growing so rapidly and

didn’t realize it had gotten out of control until we got ready to sell.”

There were four problems: grouping expenses for the shops — “that was our first mess up,” Hall Jr said; a near-monopoly in the market — “the only MSO … we had a great reputation;” inexperienced workforce — “the talent we had, had never done anything that large;” and exponential expense growth — “keeping up with ADAS … changing metals … I-CAR [training.]”

Grouping expenses is a big no-no, but the Halls are by no means unique in the industry here. And while a near-monopoly sounds like a nice problem to have, market dominance bred some carelessness. The busy business has to keep serving the customer; paperwork didn’t get done.

Expense growth is a given, and employment issues — changes wrought by COVID like finding willing techs, then having them miss time for training on new systems -- also hit ops.

The shops had no full-time bookkeeper.

Boiled down: scant attention for financials. “We were just focused on getting things done.”

Speed Kills

“It was chaotic,” Hall Jr. said. “We’d created a beast.”

Much work was done in the family: dad on a construction project, Shaun running a store.

“Things got away from us a bit.”

The MSO’s metrics were good, the family said, and made shops an acquisition target, with the usual nosing about by big buyers, including Joe Hudson’s, who’d been calling for about a year, and Caliber Holdings LLC.

Before they saw the problem, the family had decided to sell.

“My dad’s health started turning [and] COVID left a bad taste” on labor, Hall Jr. said. “Big MSOs were buying up shops; we felt it was a good time.”

Consultant Laura Gay of Floridabased Consolidation Coach stepped in.

“It’s hard to keep the books clean, if you’re running a fast-paced, highproduction collision shop,” she said.

“To take it to market,” material has to be structured for the gimlet-eyed, green eyeshade guys. Gay called the process “forensic financial analysis.”

Slowing Down

The list of financial must-haves —

407-295-7379

(407) 291-2541 Fax

M-F 7:30-6, Sat. 7:30-5 parts@reedmotorsinc.com www.reednissan.com

Vero Beach

772-778-3600 (772) 778-1927 Fax

M-F 7:30-6, SAT. 8-3 wstevens@sutherlinautomotive.com

M-F 8-5, Sat. 8-3 iogparts@gmail.com www.Infinitiofgwinnettparts.com

954-390-6449 Fax Hours: M-F 7-6; Sat 7-2:30 jmcnamara@griecocars.com Gus Machado Ford HIALEAH

305-825-3018 Fax Hours: M-F 8-7; Sat 7-4 avalle@gusmachadoford.com

M-F 7-6; Sat 7-4 www.autonationfordmemphis.com

multiple income and cost-of-goods accounts, separate labor costing for each area, profitability by profit center, taxes — make you want to say, “Are you sure?”

She’s sure.

Hall added to the list: “assets, sales information, land, leases, list of employees and their certifications.”

“This is something all shop owners should do,” Gay said.

Employment issues crop up, again, too.

“Estimator, parts person, whoever closes the ticket, the actual person doing the books, coding it all properly,” Gay said. “You need people who embrace it.”

She said ideally collision centers do this as they go; often they don’t. “There’s always lug nuts that don’t get tightened.”

Steve’s Auto Body created a whole new set of books for each shop, and filed amended tax returns as numbers clarified.

“There was a lot of unwinding to rewind,” Gay said.

Future Bright

“I didn’t want to sell to an MSO that

just completely change everything.”

Joe Hudson’s has more than 230 locations. This month it entered Ohio, its 17th state, and most recently bought shops in Georgia and Mississippi.

It had 194 shops in 15 states when it bought the Halls’ MSO, which was its entrance into Arkansas. JHCC

CEO Brant Wilson said in a press release on the deal the consolidator would be “developing a successful Arkansas market with these new locations.”

Gay called buying a dominant mini-MSO “a platform opportunity for a consolidator.”

Joe Hudson’s website this month lists 12 Arkansas collision shops in its system.

The Halls have seen more health issues, and Hall Jr. said they can spend more time together.

And work slower, doing real estate development. The family kept the land the shops sit on, and lease it to the new owner. Hall Jr. called the lease “awesome.”

Five acres near one of the shops remain in the family; the Halls plan to develop a self-storage facility.

Quality

Collision Group Acquires Triangle Collision in Raleigh, NC

Quality Collision Group announced its acquisition of Triangle Collision in Raleigh, NC, a premium collision repair facility renowned for its high standards and customer commitment. This acquisition increases QCG’s national footprint to 71 partner locations and improves its service offerings in the Raleigh metropolitan area.

“Acquiring Triangle Collision is a key step in our strategic growth,” said Blake Farley, EVP of operations at QCG. “Their commitment to performing repairs the right way and reputation for outstanding customer care are exactly what we seek in our partners. Together, we will continue to set the industry standard for collision repair.”

Founded in 1984, Triangle Collision has earned a reputation for its exceptional OEM-centric services and a steadfast dedication to customer satisfaction. The facility is equipped with the latest technology and tools necessary to meet the rigorous standards of automotive manufacturers. With

brands such as Tesla, Honda/ Acura, and Subaru, Triangle Collision’s technicians are adept at restoring vehicles to their factory specifications. Additionally, the center holds an I-Car Gold Class certification.

“We couldn’t be more thrilled to join forces with Quality Collision Group,” said Clint Rogers, owner of Triangle Collision. “We’ve taken pride in delivering unmatched repair quality and customer service for years. Partnering with QCG allows us to build on that legacy while giving us access to cuttingedge resources and support. This ensures our customers and employees will benefit from the best the industry offers, solidifying our position as the go-to collision repair facility in the region.”

The acquisition enhances QCG’s service capabilities within the competitive North Carolina market, joining Relentless Collision’s facilities in Raleigh, Durham and Cary. For further details about Quality Collision Group or partnership opportunities,

GENUINE PARTS

Mitchell Donates $1.5M in Tech To Boost Collision Engineering Program

By Elizabeth Crumbly Autobody News

An unexpected contribution has bolstered an education program nurturing bright-eyed new talent through the industry pipeline. San Diego-based Mitchell, a company that specializes in claims technology solutions, recently announced a $1.5 million in-kind donation to the Collision Engineering program, which serves students at seven colleges across the nation.

“What a surprise it was to receive that donation from them,” said Mary Mahoney, vice president for Enterprise Mobility, which launched the Collision Engineering program in partnership with Ranken Technical College in St. Louis, MO. The program includes eight weeks in the classroom and another eight in a body shop apprenticeship.

“They are a valuable partner of ours,” she told Autobody News of Mitchell. “They believe in the mission. They believe in trying to

build, recruit, coach and develop that next generation of collision repair technicians.”

‘So Much More Opportunity’

The donation, Mahoney explained, will provide more students with access to its advanced technology solutions, including Mitchell Cloud Estimating with Integrated Repair Procedures and Mitchell TechAdvisor.

New vehicle innovations mean body shop technicians need software knowledge alongside collision repair skills. Through Mitchell’s technology donation, students receive realworld experience using the same advanced solutions as collision facilities do today to restore vehicles to pre-accident condition, she said. Students’ access to the system in the program will enhance the employability of graduates.

Advanced software like this, Mahoney said, can be difficult to integrate into a curriculum because of the training needed. To curb that challenge, Mitchell is providing ondemand training for instructors, along with product guidance and live webinar training sessions for students hosted by Mitchell trainers.

The technology should go into use in the next few months: Instructors, Mahoney said, are “ecstatic.”

“They were so excited, and they just saw so much more value for the student, and so much more opportunity to inspire them and give them more confidence,” she said.

The Collision Engineering program began as a pilot endeavor in 2020 at Ranken and has since spread to seven colleges, including, most recently, Sandhills Community College in Southern Pines, NC. Since launching, the CEP has graduated 165 students, Mahoney said, and it maintains roughly an 87.5% retention rate.

Future Growth

A focus moving forward is on which schools to bring into the program and how to continue financial support for students and the colleges currently participating. Bringing more women into the program, and thus the industry, is also close to the forefront.

“They feel this environment is more comfortable for them,” she said. “We have 15 women that are either in the program now or have graduated, and those are the kind of the comments we’ve gotten from them.”

ASE Education Foundation Encourages Mentorships

South

NO. CAROLINA

The ASE Education Foundation is actively calling on automotive industry professionals to volunteer as mentors in an effort to combat the ongoing shortage of qualified automotive service technicians. Mentorships are a critical tool in bridging the skills gap by giving students hands-on experience and industry connections.

Mentors from local businesses provide essential real-world training, enabling students to apply classroom knowledge in professional settings. These mentors work alongside schools and instructors, offering both guidance and feedback to students while helping place them in entrylevel positions within the automotive and transportation industries.

Industry members interested in becoming mentors are encouraged to contact their local ASE field manager, who serves as a liaison between students, schools, and ASE industry partners. A full list of ASE field managers and the areas they serve is available at www. aseeducationfoundation.org.

Collision Engineering program students at the College of Lake County participate in an instructional session. Photo contributed by Enterprise Mobility

Indeed, feedback from women graduates has reflected positively on the support and structure the program offers.

“When I was picking a career, I knew I wanted to be passionate about it, but I also wanted to make an impact and the trades had that to offer,” said Karina Badillo, a College of Lake County CEP graduate. “When I first started college, I bounced around through welding and through automotive technology, but they didn’t have a program that was similar to this … you can really connect the bookwork to the actual hands-on experience that the real world has to offer … It is really nice being able to have a team behind you.”

Developing Partnerships

Expansion means the need for more industry collaboration and partnership.

Enterprise Mobility Foundation has provided most Collision Engineering funding thus far, Mahoney said, with expenditures per student coming in at just over $10,500. That number covers tools, PPE equipment books and other supplies.

The foundation also funds school needs like instructors and training equipment, and it subsidizes student pay during their shop participation by adding to the amount employers can

provide. Additionally, funds support the professional and personal development of students and their mentors.

“We want these students to understand how to operate successfully in a work environment, and develop strong relationships,” Mahoney explained. “The idea is to help build a culture where people feel more comfortable. That has been a wonderful add, and people want more of that.”

A significant contributor has been the Ford Fund, which provided nearly half a million dollars allowing the collision program at Parkland College in Champaign, IL, to continue and relaunch as Collision Engineering.

Westmont, IL-based MSO Crash Champions has hosted program apprentices in shops, and CEO Matt Ebert has made the program the company’s charity of choice for an annual fundraiser, Mahoney said. AAA Northern California has also committed to contributions to the program, including vehicle donations.

“Our goal now is building off what we have learned and continuing to expand. What we recognize is we can’t do this alone, and we are looking for everyone in the industry to join the movement,” Mahoney

7:30am - 5:30pm Sat 8am - 4pm manderson@lynchauto.com

CCA Reschedules Quarterly Meeting To

Due to Hurricane Helene, the Carolinas Collision Association postponed its final quarterly meeting of 2024 to Nov. 14 at Sandhills Community College’s Stone Hall in Pinehurst, NC.

The meeting was originally scheduled for Oct. 3. Doors open at 5 p.m. The event begins at 6 and includes dinner and two presentations: Logan Morris  will speak about “Comprehensive Compliance Simplified,” and Jeremy Winters of Accudraft will present “Importance of Maintenance and Evolution of Paint Booths.”

Registration is $10 for CCA

members, including shops and vendors, as well as for students and educators and non-member shops attending their first CCA event. Registration is $20 for non-member shops and vendors. To register, visit carolinascollisionassociation.com. Sandhills Community College is located at 3395 Airport Road, Pinehurst, NC 28374. CCA is also currently collecting donations to help area shops affected by Hurricane Helene. To donate, go to https://collectcheckout.com/collectcheckout/fields?cartId=5341ab9873d3-4130-bd50-5140e05be731

VIRGINIA

757-687-3465

Fax: 757-687-3514

M-F 8am-5pm volkswagenparts@checkeredflag.com

Fax: 770-986-0001 M-Sat 7:30am-7pm vwwholesaleparts@jimellis.com

Co-President & Publisher

Nathan Gregory

Co-President & Publisher

Paul Stepanek

Editor Abby Andrews

Contributing Writers

Mike Anderson, Brian Bradley, Elizabeth Crumbly, Paul Hughes Stacey Phillips Ronak, Leona Scott Ben Shimkus, Cole Strandberg John Yoswick

Advertising Sales

Norman Morano, Steve Sklenar, Paul Ropski

Office & Media Manager

Kelly Cashman

Director of Digital

Bryan Malinski

Design Director

Vicki Sitarz

Art Director

Rodolfo Garcia

The Right to Equitable and Professional Auto Industry Repair (REPAIR) Act, (HR 906), did not receive the necessary committee markup to advance to the House floor.

The bill, which had been under consideration since last October, seeks to prohibit vehicle manufacturers from impeding a vehicle owner’s access to their vehicle’s data related to diagnostics and repair. It also would also prohibit automakers from impairing a nonOEM parts manufacturer from producing or selling compatible aftermarket parts.

According to House Energy and Commerce Committee Chair Cathy McMorris Rodgers, while the bill was not marked up, it still deserves recognition for the extensive groundwork laid by its proponents, including U.S. Rep. Neil Dunn of Florida and his team.

“I did want to mention one bill that we will not be considering today, the REPAIR Act, led by Dr. Dunn. I want to recognize the hard work that he, his staff and numerous stakeholders have done,” McMorris Rodgers said. “While we aren’t marking it up today,

Accounting & HR Manager

Heather Priddy

Content Manager

Randi Scholtes

Serving Illinois, Iowa, Indiana, Kansas, Kentucky, Michigan, Minnesota, Missouri, Nebraska, North Dakota, Ohio, South Dakota, Wisconsin and adjacent metro areas. Autobody News is a monthly publication for the autobody industry. Permission to reproduce in any form the material published in Autobody News must be obtained in writing from the publisher.

©2024 Autobody News, LLC.

Autobody News P.O. Box 1516 Carlsbad, CA 92018 (800) 699-8251 (760) 603-3229 Fax editor@autobodynews.com

a lot of progress has been made, and I would encourage members and stakeholders to keep working together to find a path forward on this important piece of legislation.”

•

•

• Conforms

•

• Saves

as hosting lawmakers at businesses and running awareness campaigns.

“The groundwork you’ve helped lay for federal right to repair legislation will be instrumental in

Advocates for the REPAIR Act have sent more than 100,000 letters to Congress, made more than 10,000 phone calls to representatives, and engaged in various grassroots activities such

our future success,” the Auto Care Association said in a statement on the bill.

The Auto Care Association said it plans to provide updates on next steps at the upcoming AAPEX event

in Las Vegas, NV. The bill can be reintroduced to Congress in 2025. Opponents of the bill spoke at the Collision Industry Conference in July, including representatives of the Society of Collision Repair Specialists (SCRS) and the Automotive Service Association (ASA).

They said the organizations backing the REPAIR Act, including insurance companies and nonOEM part manufacturers and distributors, are more focused on the aspects of the bill that would give those companies the right to produce non-OEM parts and use them in repairs.

They also pointed out that SCRS and ASA already have a voluntary agreement with the Alliance for Automotive Innovation, which represents automakers, guaranteeing independent repairers have access to OEM tools and information.

Wayne Weikel, of the Alliance for Automotive Innovation, said his organization, along with SCRS and ASA, had been meeting with members of Congress to explain their position on the REPAIR Act.

Hurricane Helene Costs Insurers $6.4 Billion

Hurricane Helene, which battered the Southeast, has left behind an estimated $6.4 billion in insured losses, according to a report from catastrophe modeling firm Karen Clark & Company (KCC).

The total spans damages from wind, storm surge and inland flooding across multiple states.

The Category 4 hurricane, which made landfall Sept. 26 in Florida’s Big Bend region, unleashed winds of up to 140 miles per hour. Beyond its initial impact, Helene wreaked havoc as far north as Ohio, causing widespread catastrophic flooding, claiming more than 200 lives and leaving millions without electricity.

The highest toll from the hurricane occurred well beyond the landfall point, with more significant wind damage reported in Georgia than Florida and severe flooding devastation in North Carolina.

Insurance giants State Farm General Insurance Co. and Citizens Property Insurance Corp., two of the largest insurers in the Southeast, are facing monumental claims, having received more than 60,000 combined in the wake of Helene. This figure reflects only a fraction of the broader economic destruction, as insured losses typically exclude flood damage, a consequence not covered under standard property policies and often insured separately through entities like the National Flood Insurance Program.

Georgia and South Carolina residents, who generally carry less flood coverage compared to those in frequently storm-hit Florida, may face considerable uninsured losses. According to another estimate by AccuWeather Inc., the total economic impact of Hurricane Helene could reach as high as $160 billion. This figure includes broader economic repercussions such as lost wages, canceled flights and supply chain disruptions, positioning Helene among the top five costliest storms in U.S. history.

More Than 670 Vehicles Destroyed at Florida Dealership

At Ken Ganley Kia New Port Richey in Florida, 672 vehicles were completely destroyed by the storm.

The vehicles suffered a variety of damages; many were submerged under 4 feet of water, some caught fire, while others had airbags that deployed autonomously.

The destroyed inventory included 660 new and used vehicles and 12 customer cars that were in for servicing. The total estimated loss ranges between $28 million to $30

million. Additionally, the owner, Ken Ganley, will face about $3.5 million in insurance deductibles due to the damages.

Kia has already dispatched 15 new vehicles to the dealership, with another 300 to 400 expected soon.

The Ken Ganley Automotive Group, which ranks as the 14th largest dealership group in the U.S., plans to send approximately 100 used vehicles from its Ohio locations to replenish the Florida site’s inventory.

Automakers Announce Assistance for Hurricane Victims

Honda has donated $500,000 to the American Red Cross to support communities affected by Hurricane Helene. The funds will assist in immediate disaster recovery efforts across the impacted region, which includes areas where Honda has manufacturing operations.

Honda is encouraging its employees to get involved by offering matching donations up to $1,000 per eligible associate contribution. The company is also providing $200 grants to eligible organizations where Honda associates volunteer their time.

In addition to financial aid, North Carolina-based Honda Aircraft is deploying its HondaJet to transport much-needed humanitarian relief to areas hardest hit by the storm.

Honda and Acura Financial Services are extending support to their customers through payment extensions and lease deferrals. This assistance is aimed at providing financial relief to those struggling in the wake of the hurricane’s destruction.

Toyota Motor North America, in partnership with Toyota Financial Services, is also matching employee donations to the American Red Cross and other nonprofits, and offering payment relief options to customers in disaster-stricken areas.

Affected lease and finance customers residing in designated disaster areas may benefit from extensions and deferred lease payments, redirected billing statements, and flexible phone or online payment arrangements.

Customers can contact Toyota Financial Services at 800-874-8822 or Lexus Financial Services at 800874-7050.

Hurricane Halts Critical Quartz Mines, Threatens Global Chip Supply Chain

In the wake of Hurricane Helene in North Carolina, operations have been halted at two of the world’s most important quartz mines,

threatening a ripple effect across the global semiconductor industry. The two mines, located in Spruce Pine, nestled in the Blue Ridge Mountains, produce the world’s purest quartz, a key material in semiconductor chips, solar panels and advanced technology.

Operations at the mines, managed separately by Sibelco and The Quartz Corp, were suspended Sept. 26, just ahead of the storm. The facilities have been significantly impacted by flooding, road closures and power outages. As of now, it’s unclear when they will reopen, raising concerns about chip shortages. Supply chain experts said it could take weeks.

The mines produce an estimated 80-90% of the world’s high-purity quartz. Though some manufacturers have stockpiles of quartz, long-term shutdowns of the mines could lead to a repeat of the 2021 global chip shortage, which caused delays in the automotive and tech industries.

FOLLOW US ON INSTAGRAM :

@autobodynews

Joe

AsTech Names New Additions To Leadership Team

Repairify announced two new additions to its leadership team: Mike Gugino as chief revenue officer and Kennedy Taylor as senior vice president of marketing.

Gugino joins asTech bringing a distinguished background across the military, investment banking and technology sectors, and a track record in driving business outcomes and strategic growth. Before joining asTech, he served as head of international operations and strategy at Axon, where he managed a global sales force and oversaw business operations, sales enablement and strategic partnerships across more than 30 countries.

Taylor brings more than a decade of marketing expertise to her new role as senior vice president of marketing, and a strong track record in developing and executing innovative marketing strategies that drive growth and enhance brand recognition. Her career highlights include leading rebranding initiatives, digital marketing transformations and successful product launches across various industries.

Center Expands To West Virginia

Joe Hudson’s Collision Center expanded its operations into West Virginia through the acquisition of Geer Brothers Body Shop locations in Barboursville and Huntington, increasing the company’s reach to 18 states. “The acquisition of both Geer Brothers Body Shop locations represents another milestone in our commitment to expanding into strategically aligned markets,” said Brant Wilson, CEO of Joe Hudson’s Collision Center. “As we mark our entry into West Virginia — the 18th state in our growing network — we recognize the importance of establishing a strong presence in adjacent markets. The locations in Barboursville and Huntington are well-respected within their communities, distinguished by their longstanding dedication to the tri-state area. We look forward to honoring the legacy of Geer Brothers by delivering outstanding service and high-quality repairs to these dynamic communities.”

“This expansion not only enhances our presence but also underscores our commitment to providing exceptional collision repair services across all our locations,”

said Cameron Dickson, COO of Joe Hudson’s. “A key aspect of our acquisition process is ensuring that potential partners are known for quality repairs and outstanding customer service. Geer Brothers has exemplified these values for decades. Our dedicated integration team is poised to seamlessly incorporate both shops, offering the support and training needed for a smooth transition. We are thrilled to enter West Virginia with these two exemplary locations.”

“Our goal is to keep these talented technicians who are both I-CAR trained and ASE-certified,” said Wendy Patrick, chief administrative officer of Joe Hudson’s Collision Center. “Their expertise is essential for delivering the high-quality repairs and customer service we pride ourselves on. Additionally, the knowledgeable and experienced front-end employees are vital to the success of these locations. As we expand into West Virginia and integrate new facilities, ensuring we retain these key team members is critical to maintaining our standards and supporting our customers effectively.”

Hudson’s Collision

TIREANDLOADINGINFORMATION

SRSSIDEAIRBAG COUSSINGONFLABLELATÉRAL (SRS)

TOAVOIDSERIOUSINJURYORDEATH: •Donotleanagainstthedoor. •Donotuseseatcoversthat Seeblocksideairbagdeployment. owner’smanualformoreinformation.POURÉVITERDESBLESSURES GRAVESOUMORTELLES: •Nevousappuyezpascontrelaporte. •N’utilizezpasuncouvre-siège quipeutbloquerledéploiementdu Voircoussingonflablelatéral.lemanuelduconducteurpour deplusamplesrenseignements.

AVERTISSEMENT BY: TOYOTA MOTOR MANUFACTURING,

Conformstoregulations: 2015

VEHICLEEMISSIONCONTROLINFORMATION

Conformstoregulations:

U.S.

U.S.EPAclass/stds: LDV/TIER2 Californiaclass/stds: PC/ULEVqualified Group: FGMXV01.80111.2L

Evap:SFI/HO2S/TWCFGMXR0095805 , OBD:

Thecombinedweightofoccupantsandcargoshouldneverexceed352kgor776lbs.

TIREANDLOADINGINFORMATION

U.S.