Ford Blower Motor Recall Issued After

ratory arrest can occur, which has deadly consequences.

Although EV technology can be very dangerous, Fuchs said that auto manufacturers have “many, many safety systems in place.” He stressed the importance of technicians being aware of the risks.

When an EV arrives at a collision repair facility via tow truck/ flatbed, Fuchs reminds technicians

to take precautions to stay safe. “You’re working on the unknown and that’s what can kill someone,” he said.

Fuchs recommended never double-clicking the start button of an EV. Instead, he advised pushing it one time without pressing the brake pedal. The light on the dashboard will come on, signifying you are in axillary mode and the battery contactors are open. Fuchs said no high voltage can go into the system using this method, which is important to know when connecting a diagnostic tool and pre-scanning the vehicle.

“Pre- and post-scanning EVs is really important to know the system configuration,” he said. “If there is a problem, we want it contained in the battery where the risk is.”

He also talked to shops about using a factory scanner to see the fault codes. By viewing the live data, technicians can check the battery/cell balancing.

“It’s important to know the difference between the minimum and maximum voltage between the individual battery cells,” he said.

The difference between two cells can lead to a higher internal resistance, which creates higher temperatures and can “end up in a fire.”

New OEM and aftermarket diagnostic tools are being introduced to the market to read the live data.

“It’s a great way to help the industry stay safe,” said Fuchs.

Before removing the battery, he encouraged technicians to always follow the described pre-scan procedure and check the battery temperature, as well as the live data and/or use a heat gun.

In a case where there is a problem with the battery, Fuchs highly recommended not bringing the vehicle into the shop until the vehicle can be monitored and the battery is removed.

Fuchs also advised shops to create a designated safe zone where EVs can be repaired apart from ICE vehicles in a very clean environment. “If someone grinds on a quarter panel or does a repair that is full

The EV Lab at I-CAR’s Chicago Technical Center in Vernon Hills, IL See EV Safety, Page 30

High-Voltage disconnecting procedure tips:

* Remove the ignition key and lock it in the lockbox so only the technician working on the vehicle has access. * When the ignition is off, disconnect the 12-volt battery (plus and minus cable) and then remove the high-voltage disconnect with proper personal protective equipment (PPE). * Place the removed battery disconnect in the lockbox. * Ensure high voltage is isolated in the battery and perform a Zero [electrical] potential test after the vehicle manufacturer’s recommended wait time. The reason for the wait time is to let the capacitors completely drain because they can store energy like a battery and contain the same voltage, which is dangerous. * Use PPE to remove the connections closest to the high-voltage battery and use a two-pole voltmeter or multimeter to verify zero potential. * Always take the following three measures on both the battery and the system side to check if the high-voltage battery is isolated and the system is safe: high voltage plus against high voltage minus, high voltage plus against ground, and high voltage minus against ground.

EMICH Chevrolet For All Your GM Collision Parts Needs

• $2M+ Onsite Inventory of Genuine GM Parts & ACDelco

Parts Updated Daily • Dedicated Team of GM Wholesale Parts Professionals (100+ Years Combined Experience) • Fleet of 12 Vehicles for Fast Free Delivery throughout Colorado • Competitive Pricing and Discounts

800-274-1127

303-986-2245

303-989-3490 24 Hr. Fax

Mon - Fri 7am-6pm l Sat 8am-4pm