March 2023 West Edition

Federal ‘Right To Repair’ Legislation Reintroduced in Congress

The Right to Equitable and Professional Auto Industry Repair (REPAIR) Act has been reintroduced by U.S. Reps. Neal Dunn, R-FL, Brendan Boyle, D-PA, Warren Davidson, R-OH, and Marie Gluesenkamp Perez, D-WA.

The legislation will ensure the preservation of consumer choice, a fair marketplace and the continued safe operation of the nation’s 292 million registered passenger and commercial motor vehicles, 70% of which are maintained by independent repair facilities.

• Preserving consumer access to high quality and affordable vehicle repair by ensuring vehicle owners and their repairers of choice have access to necessary repair and maintenance tools and data as vehicles continue to become more advanced.

• Ensuring access to critical repair tools and information—all tools and equipment, wireless transmission of repair and diagnostic data and access to on-board diagnostic and telematic systems needed to repair a vehicle must be made available

Driver of Tesla Model Y Who Drove Off 250-Foot CA Cliff Pleads Not Guilty

By Simon Alvarez Teslarati

Dharmesh Patel of Pasadena, CA, the man behind the wheel of the Tesla Model Y that plunged 250 feet off a cliff at Devil’s Slide in California, pleaded not guilty in court Feb. 9.

Patel is charged with three counts of attempted murder and domestic violence.

Among Patel’s victims were his wife, as well as his 7-year-old daughter and 4-year-old son. Rescuers who responded to the incident said the kids were able to escape the 250-foot drop with mild to moderate injuries. Patel and his wife had more serious injuries.

REGIONAL NEWS

On Feb. 9, Patel was ordered by a judge to remain in custody with no bail. He was also given a no contact order, which prevents him from contacting his wife and two children.

MEMA Aftermarket, Auto Care Association, CAR (Consumer Access to Repair) Coalition and Specialty Equipment Market Association (SEMA) all applauded the move.

The REPAIR Act will accomplish this by:

to the independent repair industry.

• Ensuring cybersecurity by allowing vehicle manufacturers to secure vehicle-generated data and requiring the National Highway Traffic Safety Administration

l CONTINUED ON PAGE 15

Prosecutors and the California Highway Patrol said on Jan. 2, Patel

l CONTINUED ON PAGE 6

Wyoming, U.S. Government Clashing Over EV Infrastructure Placement

By William Johnson Teslarati

The State of Wyoming and the federal government are arguing over where the state should place EV infrastructure.

Despite the news in January that Wyoming was considering banning EVs, Wyoming may be far less anti-EV than one would think. According to EnergyWire, the state is staunchly in support of placing EV infrastructure. However, the federal

INSIDE THIS ISSUE

government denied its proposed location for chargers.

The directive set by the Biden Administration was clear—EV chargers should be placed every 50 miles along U.S. interstates, ensuring Americans are never too far from a charger for their vehicle. This sounds like a good idea, but representatives in the Wyoming State Legislature believe it is counterintuitive.

Wyoming is a unique state, with its vast tracts of open land and numerous

l CONTINUED ON PAGE 10

Columnist Mike Anderson: The Customer Experience and Overworked Admin Staff

Columnist Ed Attanasio: From Tech to TV Spokesperson/Instructor: The Kevin Tetz Story 28

Columnist Stacey Phillips: I-CAR Vehicle Tech and Trends Course Helps Repairers Prepare for the Future

Columnist John Yoswick: SCRS Says Information Providers Taking New

at Blend Formulas

COLUMNISTS

Mike Anderson

The Customer Experience and Overworked Admin Staff 4

Abby Andrews Collision Repairers Should Invest Now in ‘People, Capacity and Innovation’ 36

Ed Attanasio

From Tech to TV Spokesperson/ Instructor: The Kevin Tetz Story 28 Go-Parts Thrived During the Pandemic and Kept Rolling 8

Index of Advertisers

The Customer Experience and Overworked Admin Staff

I had the privilege and honor of addressing the hundreds of professionals at the Collision Industry Conference (CIC) in Palm Springs, CA, in January, and I wanted to share some of what I said there.

One of the key messages: the administrative staff at collision repair facilities today are overwhelmed, pulled in so many directions at the same time. They have to do rental car updates, take OEM training and I-CAR classes, they’re receiving OpenShop assignments and getting emails and phone calls. If we don’t fix this, we’re going to lose people.

Why is that? Let’s take a look at estimating or repair planning. We at Collision Advice are fortunate to do factory estimate training for Toyota/ Lexus, Nissan/Infiniti and other automakers. We recently wrote an estimate to replace a quarter panel on a 2022 Toyota Camry. We had 783 pages of OEM documentation we had to review just to write that estimate to replace a quarter panel. That’s why shops find themselves having to add more admin staff. At some point we’ve got to figure out how to reverse that trend. That means we’ve got to start better using technology.

I also said at CIC that part of the solution is being able to offer the competitive wages and benefits those employees can receive at other companies in other industries, something I’ve written about in this column

career path. As I told the attendees at CIC last month—and in The Collision Vision, Autobody News’ new podcast, available at www.autobodynews. com/podcasts—as an industry, we must develop a standard career path.

Taking a New Look at CSI

Lastly, among the messages I delivered at CIC was something else I’ve written about in this column: My view that for all the positive benefits customer satisfaction indexing (CSI) has brought to our industry, I think customers have survey fatigue.

I also think we have been so focused on three CSI questions— were they kept informed, was the delivery on time, and was the vehicle fixed right the first time—that we’ve stifled the creativity of our staff to create an amazing customer service experience. There’s customer service, and then there’s the customer experience. The focus on those CSI questions has handcuffed

the creativity of our staff to create an exceptional customer service experience.

I told CIC I had two simple words about it: Stop it. We need to stop doing things the way we’ve done it. And we need to open up our mind to creating a more modern service experience for our customers. It can start with something simple. When you use Uber, for example, you get a digital receipt. What are we still giving our customers? A paper receipt. Why aren’t we asking: would you like a paper receipt, a digital receipt or both?

Like I did in this column a while back, and in The Collision Vision, I posed this question to those at CIC: are CSI surveys the way we continue, or do we move to focusing on online reviews?

I don’t know the answer to that. It may be both. But I said CIC may be the forum where we as an industry can discuss that and hash it out. Hope to see you at the next CIC, April 12-13 in Richmond, VA.

As my friend Ray Chew Intelligent Solutions says: We need to figure out how to eliminate human disruption. That means, first, that we have to embrace technology as an industry. We’ve got to quit beating up software companies when they roll out something and it’s not quite perfect. Because you sometimes have to start somewhere. You’ve got to crawl before you walk, before you run.

We do the financials, the profit and loss statements, for more than 400 collision repairers that combined do more than $1 billion a year in revenue. In 2017, the average body shop was spending about 10% of sales on administrative wages. Ladies and gentlemen, we are seeing some shops today where it’s as high as 15.3%. That means at many collision repair facilities, average admin wages have gone up 4 percentage points. Four percent on a million dollars is $40,000. That comes from the bottom line.

If a fast food chain like Chipotle can lay out a career path for potential employees right on its website, our industry needs to do the same

SRSSIDEAIRBAG COUSSINGONFLABLELATÉRAL

CONTROLVEHICLEEMISSIONINFORMATION

Fuel: Gasoline

TOAVOIDSERIOUSINJURYORDEATH: •Donotleanagainstthedoor. •Donotuseseatcoversthat Seeblocksideairbagdeployment. owner’smanualformoreinformation.

WARNING AVERTISSEMENT

POURÉVITERDESBLESSURES

GRAVESOUMORTELLES: •Nevousappuyezpascontrelaporte.

Conformstoregulations: 2015

Californiaclass/stds: PC/ULEVqualified

U.S.EPAclass/stds: LDV/TIER2

Group: FGMXV01.80111.2L Evap:

TIREANDLOADINGINFORMATION

Conformstoregulations:

SEEOWNER’S MANUALFOR ADDITIONAL INFORMATION

VEHICLEEMISSIONCONTROLINFORMATION

Conformstoregulations:2016MY Not for sale in states with California emissions standards.

U.S.EPA:T2B4 LDV

FEDOBDII

TWC/HO2S/WR-HO2S/CAC/TC/DFI

2.3L-Group:GFMXV02.3VJW Evap:GFMXR0125NBV

Fuel:Gasoline ABZ

Noadjustmentsneeded.

VEHICLEEMISSIONCONTROLINFORMATION

U.S.EPA:T2B4 LDV

2016MY

FEDOBDII

TWC/HO2S/WR-HO2S/CAC/TC/DFI

2.3L-Group:GFMXV02.3VJW

Evap:GFMXR0125NBV

Fuel:Gasoline ABZ

California: Not for sale in states with California emissions standards.

Noadjustmentsneeded.

VEHICLE MFD .BY: TOYOTA MOTOR MANUFACTURING, GVWR 4233LB GAWR FR 2668LB RR 2668LB THIS VEHICLE CONFORMS TO ALL APPLICABLE FEDERAL MOTOR VEHICLE SAFETY , BUMPER , AND THEFT PREVENTION STANDARDS IN EFFECT ON THE DATE OF MANUFACTURE SHOWN ABOVE . PASS. CAR C⁄ TR : 4Q2 ⁄ LA43 ACV30L--CEPGKA A ⁄TM: --01A ⁄ U241E MADE IN U.S.A. 08270 00000000000000000 KENTUCKY, INC. 02⁄ 04 STK A AA5 To Visit Our Website SCAN HERE FOR ADDITIONAL INFORMATION ABOUT AUTO DATA LABELS: visit our website at www.AutoDataLabels.com email us at labels@AutoDataLabels.com or call us at (631) 667-2382 4 EASY WAYS TO ORDER LABELS! DON’T RISK LOSING YOUR VEHICLES IDENTITY! ORDER REPLACEMENT VIN LABELS TODAY! Federal Safety Certification (VIN) Label C /TR : 218 ⁄ FA2 0 AXAA54L– ANZMBA A/TM : -01A ⁄U B 80F MADE IN U.S.A. 512 THIS VEHICLE CONFORMS TO ALL APPLICABLE FEDERAL MOTOR VEHICLE SAFE TY AND THEF T PREVENTION STANDARDS IN EFFECT ON THE DATE OF MANUFACTURE SHOWN ABOVE. 11 /18 VEHICLE MFD. BY: TOYOTA MOTOR CORPORATION GVWR: 2090KG ( 4610LB ) GAWR: FRT. 1150KG ( 2535LB ) WITH 225/65R17 TIRES, 17X7J RIMS RR. 1150KG ( 2535LB ) WITH 225/65R17 TIRES, 17X7J RIMS E Replacement label: Not from Toyota JTMP1RFV1KD000000 MPV Contact Us : Contact your LKQ/Keystone Local Sales Rep Upload your photos to the Website: www.AutoDataLabels.com Email your photos: Labels@AutoDataLabels.com Use the App: Download the ADL App And Upload your Photos VIN labels contain vehicle-specific safety information. This information is critical for safe operation and proper repair procedures. • Tire Pressure • Gross Vehicle Weight (GVW) • Paint and Trim Codes • Spare Tire Size

Old EV Batteries Being Reused As Energy Storage Devices in CA

By Maria Merano Teslarati

Electric vehicles are here to stay, and the subject of what to do with their battery packs once they are no longer suitable for the road remains a key concern among skeptics.

A response to these concerns is currently being demonstrated in California by B2U Storage Solutions Inc, a Los Angelesbased startup using secondhand EV batteries as energy storage systems that can support the grid.

B2U said its use of old EV batteries can significantly lower the cost of carbon-free energy storage. The company also said so far, it has 25 MWh of storage capacity tied to a solar energy site in Lancaster, CA. The battery storage system, composed of 1,300 old electric car batteries, is believed to be the first of its kind.

The system is promising, with B2U CEO Freeman Hall stating the batteries earned $1 million

last year selling power into the wholesale energy market. Hall also estimates the use of old EV batteries could reduce the costs of grid-scale battery installations by about 40%.

So far, B2U’s system uses batteries from old Honda and Nissan electric vehicles, and some are up to eight years old.

“Second life and reuse helps the overall lifecycle be more energy efficient, given all the efforts that go into making that battery. So you’re getting maximum value out of it,” Hall told Reuters.

What’s especially admirable about B2U’s technology is its solution doesn’t even require old EV batteries to be disassembled or reconfigured. The batteries themselves are connected into a climate-controlled storage pod sized like a shipping container, and they’re used with their existing casings. The batteries are managed through their existing onboard management software as well.

Pleads Not Guilty

was driving his Model Y near Devil’s Slide when he steered the vehicle off the road. Patel’s alleged actions resulted in the Model Y falling off the cliff and crashing on its wheels onto a beach. Cameras in the area reportedly showed the Model Y did not engage its brake lights as it headed to the cliff.

The family miraculously survived.

In a statement to KRON4, District Attorney Steve Wagstaffe said Patel’s wife was screaming when she was reached by the paramedics. She also made a statement immediately.

“She did make a statement. She said, very simply, ‘This was not an accident,’” Wagstaffe said.

Wagstaffe said while the Tesla Model Y was crushed on all sides, “by some miracle that I don’t understand, all of them have survived.”

Wagstaffe also said they are currently looking into Patel’s motive. “We don’t know the motive. That is the big question right now. But we will continue to look into that, why he would do this,” he said.

A defense attorney said Patel’s wife reportedly does not want to prosecute her husband. Chief Deputy District Attorney Sean Gallagher, however, said there seems to be enough evidence to prove the charges against Patel.

“Regardless of whether she is cooperative, we believe we have sufficient evidence to prove the charges beyond a reasonable doubt.” He added the case is a “very dynamic situation whenever you have this violence within a family setting.”

Prior to the accident, Patel was working as a doctor at the Providence Holy Cross Medical Center. If found guilty, he may face life in prison.

Go-Parts Thrived During the Pandemic and Kept Rolling

By Ed Attanasio Autobody News

Go-Parts is taking a cutting-edge approach to the distribution of aftermarket parts and it’s working for all the right reasons, as explained by CEO Sean Kennedy.

Q: While many parts suppliers, both OE and aftermarket, were hit hard by the pandemic, your business model exceled. Please explain.

A:The impact the pandemic had on our industry, and many others, cannot be overstated. We experienced similar challenges to many of our partners and peers. However, in a climate of clogged supply chains and sluggish recovery, there is a high likelihood that the substantial growth we experienced

immediate advantage. Go-Parts had only been servicing this segment of the automotive market for a couple of years when the supply chain issues began, making us largely an unknown quantity.

The second question here is probably a bit more difficult to answer—have those factors disappeared after the pandemic passed? From a supply chain standpoint, largely yes, but we can clearly see that our new collision partners value what we bring to their businesses and the industry as a whole.

Q: What are you doing to leverage that position you created during the pandemic?

A: I believe our strategy is fairly simple—continue doing what we promise we will do. We were given an opportunity to show that this model, built from our

collision repair segment. This isn’t to say that we don’t build relationships in our ecommerce vertical, because we certainly do, and I am very proud of our brand’s reputation in that space. Rather, this segment of the market requires

technology to improve the stockchecking and buying experience. By providing data in real-time, our partners can better map out their internal operations and know exactly where those parts are at any given moment.

Q:What does the future hold at Go-Parts?

A:While we have a particularly good sense of who we are as an organization, the future is a blank canvas. Our primary goal has always been to iterate based on the needs expressed to us by our supply chain, repair and insurance partners. So the future is quite uncertain but, we feel, it is for all the right reasons.

an entirely different approach and we have thoroughly enjoyed the dialogue with our insurance and

Go-Parts relies on its malleability and iterative culture to keep our organization pointed in the right direction, which is why we have no issues navigating the industry via direct dialogue with clients

in that period stemmed from our use of a decentralized supply chain and distribution network. This dynamic allowed us to weave our way through those challenges, providing uninterrupted service to our partners with no compromise on part or service quality.

Q: What were the major factors behind that shift, and did they disappear after the pandemic passed?  A: Well, I think the dynamic outlined in the previous question fueled a desire to seek out new methods of part procurement. Part availability became a topic of conversation throughout the industry, so simply having the product was an

CEO Sean Kennedy at Go-Parts is using the latest technology to help his shop customers get parts fast

“We are going to continue leaning into who we are—a tech-forward organization that relies on automation, decentralization and soon, the power of AI to streamline the supply chain and deliver value to our role in the process.”

SEAN KENNEDY GO-PARTS CEO

examples of natural beauty; it is the pinnacle of a state people love to visit but not live in. Hence, Wyoming

chargers every 50 miles, going as far as threatening to cut funding for other projects in Wyoming. But in perhaps the most cowboy response the federal government has received in the past 100 years, Wyoming didn’t seem to care.

According to Alternative Fuels Data Center statistics, Wyoming has 81 EV charging station locations, more than only Alaska (57), North Dakota (78) and South Dakota (73).

It should be noted Wyoming’s EV charger plan still includes the placement of some EV chargers along interstates, and in fact, Wyoming is currently in the process of constructing seven of them. However, the state has declined an

equal number of chargers, meaning numerous proposed charging locations, both proposed by the feds and not, will not receive funding.

The U.S. Department of Transportation was not immediately available to comment regarding the situation in Wyoming.

That takes us to today, with Wyoming standing its ground and U.S. Transportation Secretary Pete Buttigieg remaining silent on the issue. In the meantime, the number of all EV chargers in the state— including those placed by Tesla—can be counted on fingers and toes.

While some Wyoming residents seem interested in the prospect of EV ownership, or, as pointed out by EnergyWire, currently own EVs, they remain without the necessary infrastructure or a solution on the horizon.

Mark Wahlin, a former ABRA franchisee and current ABRA vice president of franchise services and operations, announced his retirement.

Wahlin has been working in the collision repair industry for almost 50 years, where he has grown into an incredible leader and mentor. In December 1987, Wahlin signed to be the first ABRA franchisee. He sold his locations to ABRA corporate in October 1998. Recognizing Wahlin’s value, ABRA offered him a position with its corporate team, where he has spent the last 25 years.

proposed EV chargers be placed in locations where most Americans want to go, en route to national parks, state parks and the mountains that bring thousands of visitors. However, none of the locations the state listed are easily accessible from an interstate like I-80 or I-90.

In September of last year, Wyoming’s plan was rejected, as the U.S. government remained entrenched in the idea of placing

Through his tenure with ABRA, he has enhanced the operational processes within the ABRA network, aided in the overall growth and success of this brand, built amazing relationships with owners and much more.

Wayne Kelly, most recently VP of eastern operations for CARSTAR, will assume Wahlin’s role to serve as the VP of operations for ABRA. Kelly has a longstanding history with the ABRA franchise family, starting his career in the automotive industry working as a tech in one of Wahlin’s ABRA facilities.

Credit: Shutterstock

Source: ABRA

Crash Champions, NABC, Restore and Donate Vehicle To Palm Springs, CA, Single Mother

The Crash Champions Collision Repair Team joined hands with the National Auto Body Council®, the Loma Linda Children’s Hospital and local nonprofit organizations to pull off a celebratory vehicle giveaway Jan. 17.

Volkswagen Jetta. The vehicle was donated by GEICO and restored to like-new condition by team members from Crash Champions’ North Long Beach repair center.

The vehicle will provide reliable personal transportation to the daughter’s regular medical appointments.

life change that NABC Recycled Rides consistently delivers, and we’re grateful to play a small part in another successful giveaway. It’s our hope that this vehicle provides a sense of freedom and opportunity for this family.”

Axalta Wins 3 2023 Edison Awards™

Axalta Coating Systems on Feb. 9 announced it has won three prestigious 2023 Edison Awards

The emotional giveaway took place at the Tahquitz Creek Golf Resort as part of the NABC Recycled Rides® program at the organization’s annual charity golf tournament.

The recipient, who was nominated alongside her daughter for the giveaway by Loma Linda Children’s Hospital, received a 2015

Certified Crash Champions technicians volunteered time and expertise to fully refurbish the vehicle in time for the giveaway. The company is a regular participant in NABC Recycled Rides events across the country, taking part in more than 50 in 2022 alone as a Level One partner of the NABC.

“This is yet another opportunity for the team members across Crash Champions to band together with our business partners and local nonprofit organizations in support of a local family in need,” said Matt Ebert, CEO and founder of Crash Champions. “Today’s giveaway is another example of the

NABC Recycled Rides is a unique program in which businesses representing all facets of the automotive collision repair industry team up to repair and donate vehicles to individuals and families in need of reliable transportation. Since the inception of the NABC Recycled Rides program in 2007, members of the NABC have donated nearly 3,000 vehicles valued at $42 million.

Crash Champions is a leading provider of high-quality collision repair service, serving customers at more than 600 repair centers across 36 states.

Source: Crash Champions

Axalta’s Abcite® 2060 Flame Spray Powder Coating, AquaEC® Flex and Self Priming Kitchen Cabinet Coating have won for the Sustainability, Smart Transportation and Material Science categories, respectively.

Named after Thomas Edison, the Edison Awards have recognized and honored some of the most innovative new products, services and business leaders in the world since 1987.

“We are thrilled to be an Edison Awards recipient for a fifth consecutive year,” said Robert Roop, Axalta’s chief technology officer. “Our recognition is testament to how Axalta continues to innovate smarter surface solutions for better living and a sustainable future. We are committed to providing the quality, innovative products and services our customers have come to expect.”

Source: Axalta

Hunter Engineering Focuses on Developing Strategic Solutions For Collision Repairers

By Stacey Phillips Autobody News

In the 1930s, Lee Hunter Jr., a 23-year-old architectural student in St. Louis, MO, often had a dead car battery in his Packard convertible. He set out to create a device that would reduce battery charge time. In 1936, he introduced the Kwikurent, a battery charger that reduced charging time from 24 hours or more to less than an hour.

After serving in the U.S. Army Corps of Engineers and the Ordnance Corps during World War II, Hunter founded Hunter Engineering Company in 1946 and introduced the Tune-In wheel balancer.

“Unlike most other manufacturers, all printed circuit design and assembly is performed in-house and produces over a million boards and cable assemblies every year,” said Settle. “This allows the company to create new products faster and maintain superior quality control.”

Throughout its history, the company has been focused on the automotive repair side of the business.

With the shift to electric vehicles (EVs), Steve Dawson, Hunter’s regional manager in the Washington, D.C. area, said the biggest growth over the next nine years will be in ADAS calibrations. As a result, the company has developed products to meet these needs, such as the ADASLink® diagnostics scan tool powered by Bosch. The equipment allows for dynamic (driving) ADAS calibrations as well as static (fixture) ADAS calibration with the Bosch DAS 3000. The DAS 3000 uses built-in cameras and rear wheel-mounted targets to position the fixture.

“We see tires, electrification and ADAS being critical [in the future],” said Dawson. “ADAS is expected to grow 400% from 2021 to 2030.”

about the Hunter Road Force® Elite wheel balancer. He said the balancer can perform a Road Force® test and balance faster than a traditional balancer and diagnoses vibration issues traditional balancers often can’t identify. It also automatically measures wheels dimensions with its patented vision system.

these critical safety systems,” said Ryan Gerber, Hunter ADAS product specialist.

With ADASLink®, shops can connect the vehicle communication interface (VCI) to the vehicle’s OBD-II port to diagnose and interact with the car. A live camera-guided interface allows technicians to position the fixture properly and an on-screen walkthrough explains how to place the calibration targets. The equipment can calibrate forward-facing radar and camera sensors as well as side and rear sensors, including blind spot and surround view calibrations.

Technicians can also perform dynamic, driving calibrations with ADASLink® plugged into the vehicle.

As the company grew, Hunter developed other innovative equipment. Hunter’s team of engineers has received more than 350 patents and set many industry precedents, including a simplified lightbeam alignment system, a computerized dynamic wheel alignment and the thrust line principle, which many say is the foundation of modern four-wheel alignment.

For his impact on the automotive industry, Hunter was inducted into the Automotive Hall of Fame in 1992. Today, the company is known for designing, manufacturing and selling a wide range of equipment, including computerized wheel balancers, tire changers, alignment racks, on- and off-car brake lathes, vehicle lifts, autonomous alignment and tire inspection equipment and ADAS calibration tools.

Tom Settle, director of field development and training, said Hunter’s award-winning patented alignment systems are used by independent shops, regional and national chains, dealerships and OEM manufacturing facilities worldwide.

The equipment is manufactured in four plants—three in Mississippi and one in Bridgeton, MO, where a research and training center is located. Also in Bridgeton is Hunter’s 26-acre global headquarters. The company has international offices in Canada, Germany and China.

With these changes, Dawson predicts automotive service will ultimately focus on the undercar.

“Shops that are not prepared for undercar in the EV world are going to be missing the boat,” he said. “Gone are the days of basic services, such as oil changes, that used to be the bread and butter of a repair shop.”

Hunter Products Showcased at SEMA

During the November SEMA Show in Las Vegas, NV, Hunter showcased its products and equipment.

Hunter’s latest innovation, unveiled during the show, is the Hunter Maverick™ tire changer, which uses some of the same technology as the Revolution™ fully automatic tire changer.

Settle said the machine allows technicians to control the tire-changing process using variable controls.

“What we find in the body shop world is that fully automatic balancers and tire changers make life easier, especially for those who don’t have the knowledge or ability,” he said.

Another tire changer on display was the Hunter Revolution . Using the semi-autonomous WalkAway™ mode, Settle said, the machine does all the heavy lifting. “If I’m in a body shop environment and I’m not a seasoned tire technician, I can go out to this particular tire changer and all I have to know is the diameter of that wheel and tire and then let the machine do the work,” he said.

Settle also shared information

Hunter sales representative Will Cronin said proper alignment is extremely important, especially with ADAS on vehicles today. Visiting shops within his designated territory, Cronin finds repairers aren’t always familiar with how to do a calibration.

“Today, many body shops have generalists who do a little of everything,” said Cronin. “Hunter’s equipment is easy to use and cuts down time dramatically.”

The Hunter HawkEye Elite® is the company’s fully integrated alignment system, which can capture alignment measurements in 70 seconds. Using WinAlign® software, Settle said four precision cameras provide alignment measurements with a high degree of accuracy, providing fast and efficient readings. The equipment can be integrated with other shop systems, providing flexibility.

The equipment includes step-bystep guidance that walks technicians through the entire process. “If you are new to the industry as far as doing alignments, you can follow along, while also utilizing the onboard training information,” he said.

Sales representative Steve Booz said shops often ask how to incorporate the equipment into their business due to space limitations. “The equipment is designed with portability in mind, so it can be moved around the shop as needed.”

By partnering with Bosch, Booz said customers can be assured they have support from both companies.

Hunter exhibited the ADASLink® diagnostic scan tool as part of the SEMA ADAS Showcase.

“With the interest ADAS is generating now and will be in the future, we’re eager to help inform and educate the industry about servicing

The solution integrates with Hunter’s WinAlign® software, providing technicians with access to specific calibration procedures for more than 25 million vehicles.

Jesse Mincer, another Hunter sales representative, said a common concern from shops is not having a level floor. To address this challenge, Mincer said the portable system can change the level of the framing system where the targets are.

By doing calibrations in-house, he said it saves shops time and allows them to control the work. The work done on the vehicle is then documented, archived and saved in the cloud using HunterNet® 2. This online customer portal was developed for undercar service operators with single or multiple rooftops, featuring online service guides, equipment manuals, IoT capabilities and more.

“None of the technology is fruitful without having some training involved,” said Settle. More than 450 representatives across the country are tasked with installing Hunter equipment and conducting operational training.

In addition, Hunter offers a variety of educational opportunities for the industry focused on efficiency and profitability. These include online video tutorials on the YouTube Hunter Learning Channel, free selfdriven e-learning classes through the Hunter University program, tuitionbased onsite training at 47 centers across North America, as well as custom training at the corporate headquarters.

Since its inception, Settle said, Hunter Engineering has focused on creating efficiency and productivity for customers.

“One of our goals in 2023 is developing strategic solutions for collision repairers so shops can get vehicles repaired efficiently and be profitable at doing it,” he said.

The Hunter Engineering team at the 2022 SEMA Show.

Miles Dierker demonstrates Hunter’s ADASLINK and the Bosch DAS 3000 at Hunter’s training facility in Bridgeton, MO.

Sponsored by:

A few of our Featured Guests:

Mike Anderson

David Leuhr

Brandon Eckonrode

Ryan Evans

Rivian

& many more

Caliber President and CEO Retiring

The Caliber family of brands announced Feb. 9 that after 26 years with the organization, President and CEO Mark Sanders will retire and move into a special advisory role for the next 18 months, effective March 6.

Sanders grew up in the collision repair industry working alongside his father, also an industry veteran. In 1997, Caliber acquired their two collision repair shops, and since then, Sanders has held a variety of operational roles, including Caliber COO and later president and CEO.

Sanders will support David Simmons in his new role as president and CEO of Caliber. Simmons has a diverse background leading large, multinational organizations in the pharmaceutical industry and brings a wealth of experience to Caliber’s next phase of growth. He previously served as CEO of PPD, where he led the company’s global workforce of more than 30,000 employees across 46 countries. Prior to PPD, Simmons spent 15 years at Pfizer as the president of emerging markets and established product business units.

Source: Caliber

Tesla Cybertruck Prototype Sports New Side Mirror Design in Recent Sighting

By Joey Klender Teslarati

A Tesla Cybertruck prototype was spotted on public roads in Palo Alto, CA, sporting a new side mirror design.

The Cybertruck is nearing early production phases, and

company will implement a new, triangular side mirror design that fits the sharp edges of the futuristic cyberpunk-inspired vehicle.

An image from the rear quarter panel of the Cybertruck was uploaded by user ftronz on Instagram, who saw the Cybertruck on Jan. 31, he told Teslarati, in Palo Alto, where Tesla headquarters is located.

Previous versions of the Cybertruck have equipped more traditional, rectangular side mirrors, or in some instances, no mirrors at all. However, the Cybertruck design is far from ordinary, and Tesla has sparred with the idea of implementing a more sleek design that would use a camera-based system.

these regulations, manufacturers are required to deliver vehicles with side mirrors. However, some states have different laws regarding mirrors. For example, Utah requires two mirrors, with only one of them being a driver-side mirror. The other could be the cabin rearview mirror. In Oklahoma, one of the two required mirrors must be located on the driver’s side of the vehicle.

Over the years, Cybertruck sightings have shown differing designs and ideas for side mirrors. In some instances, the Cybertruck has been completely void of them, and others have used various mirror shapes.

according to Tesla’s Chief Vehicle Designer Franz von Holzhausen, the automaker has finalized the vehicle’s design.

It appears Tesla has experimented with a new side mirror design. If von Holzhausen’s statement is true, it seems the

However, federal safety standards require the use of side mirrors for rear visibility. The NHTSA has entertained a potential change in this requirement as “camera monitor systems” could be considered a safe and viable alternative to rear view mirrors.

CEO Elon Musk has said, due to

With von Holzhausen’s comments recently indicating the design phase has concluded, perhaps this is the side mirror design Tesla will use.

Cybertruck production is set to kick off this summer, Musk said on the recent Q4 2022 earnings call. However, volume production is set to begin sometime in 2024 at Gigafactory Texas near Austin.

Flavio Tronzano posted this picture on Instagram of the latest Cybertruck prototype he spotted in Palo Alto, CA

(NHTSA) to develop standards for how vehicle-generated data necessary for repair can be accessed securely.

• Providing transparency for consumers by requiring vehicle owners be informed they can choose where and how to get their vehicle repaired.

• Creating a stakeholder advisory committee and providing them with the statutory authority to provide recommendations to the FTC on how to address emerging barriers to vehicle repair and maintenance.

• Providing ongoing enforcement by establishing a process for consumers and independent repair facilities to file complaints with the FTC regarding alleged violations of the requirements in the bill and a requirement that the FTC act within five months of a claim.

As vehicle technology continues to advance, new barriers to a competitive auto repair market are emerging. These barriers limit consumer choice in where to repair their motor vehicles and increase the cost to repair and maintain vehicles. The REPAIR Act will reduce these

barriers, putting consumers’ interests first.

Dunn is a member of the House Energy and Commerce Committee, which has responsibility for consumer protection matters, among several other topics, and is where the bill has been referred.

“When it comes to repairing their automobiles, consumers deserve options,” said Dunn. “The REPAIR Act would give owners, including the rural communities in my district, secure access to critical data so the service center of their choosing can replace parts and repair their vehicles. I am proud to support competition in the vehicle repair industry and this important legislation.”

“There are hundreds of neighborhood mechanics in Philadelphia,” said Boyle. “The last thing those small business owners need is to be boxed out of making a living. This legislation would not only protect the business relationships between automobile owners and their mechanics, but it also ensures consumers continue to have more options on where to go for repairs.”

“By prohibiting vehicle owners from accessing and sharing data they generate, manufacturers stop consumers from accessing thirdparty repair shops,” said Davidson.

“American vehicle owners have a

right to control their data, and a right to access third-party repair shops, tools and parts.”

“Working families in rural America can’t afford to take a day off to drive their car to the dealership for a costly repair. The REPAIR Act is a bipartisan solution to improve vehicle data access laws to give working families more choices for repair when their car breaks down,” said Gluesenkamp Perez. “I appreciate Reps. Dunn, Boyle and Davidson for their leadership on this issue, and look forward to working in a bipartisan fashion to improve repair laws for families who work for a living.”

The bill is introduced on significant momentum for choice in repair. In November 2020, Massachusetts voters overwhelmingly voiced their support for Ballot Question 1, also known as Right to Repair, with 75% of the vote, which preserves their right as vehicle owners to have access to and control of their vehicle’s mechanical data necessary for service and repair at the shops of their choice.

In May 2021, the FTC released its “Nixing the Fix” report, which highlighted barriers vehicle manufacturers have instituted to squash a consumer’s right to repair. The FTC strongly supports expanding consumer repair options and found “scant evidence” for repair

restrictions imposed by original equipment manufacturers.

In July 2021, President Joe Biden issued the “Promoting Competition in the American Economy” executive order, which encouraged the FTC to address anti-competitive repair restrictions.

In December 2022, the Digital Fair Repair Act was signed into law by New York Gov. Kathy Hochul, and in January 2023, John Deere signed an MOU with the American Farm Bureau Federation.

The REPAIR Act is the only bill that addresses vehicle maintenance and repair restrictions, including heavy duty vehicles the U.S. economy depends on for freight transport.   Automotive aftermarket companies can urge legislators in their district to also co-sponsor the bill by visiting repairact.com.

Source: MEMA Aftermarket

As a family owned and operated dealership since 1909, Glenn E. Thomas Dodge has proudly been serving Chrysler, Dodge, Jeep and Ram customers for 105 years.

We have a long history of providing great service with honesty and integrity.

Vehicle Technology and Trends 2023 Course Helps Repairers Prepare For the Future

By Stacey Phillips Autobody News

With the growing number of advanced driver-assistance systems (ADAS) on new vehicle models, it is becoming increasingly important for collision repairers to understand how they are designed and operate.

This includes features on hybrid, plug-in hybrid and electric vehicles (EVs), especially since EVs are expected to account for nearly 33% of

Q: What prompted the creation of the Vehicle Technology and Trends 2023 course?

A: Launched in 2017, I-CAR’s Vehicle Technology and Trends course is an annual course the I-CAR team develops to highlight new or updated vehicle models, new and evolving technologies, and trends we see that are common to one or more vehicle makers. An updated version of the class has been introduced

technology and the requirements to repair these vehicles properly. This begins with researching and understanding vehicle maker repair procedures and requirements, and keeping up with the latest technology and repair techniques.

There is no wrong way to learn. You can succeed in this industry as long as you engage with the resources available and continue to push yourself to build upon your knowledge and skills.

Q:Can you share information about the collaboration with OEMs?

A: I-CAR works with all segments of the industry, including OEMs, to help identify changes in vehicle design, repair techniques and technologies. Then we develop the educational programming to help ensure collision repair professionals have the information and training required to perform complete, safe and quality repairs for the ultimate benefit of the consumer.

with OEMs in many ways, including developing custom training courses or specialized training programs, vehicle-specific training, and

new vehicle sales in 2030, according to the Inter-Industry Conference on Auto Collision Repair (I-CAR).

“This helps assure that the system is functioning correctly after repairs are completed and before the vehicle is returned to the customer with a complete, safe and quality repair,” said Bud Center, I-CAR’s director of technical products and curriculum.

Center said I-CAR’s Vehicle Technology and Trends 2023 course helps repairers learn about changes in the industry and to prepare for the future. The one-hour, online class includes information about new vehicle features and technology as well as electrical, mechanical and construction trends. Students can preview new and updated vehicle models for domestic, Asian and European imports, as well as some 2024 vehicle offerings.

The course also highlights resources created for technicians, such as the I-CAR Repairability Technical Support (RTS) webpage and the I-CAR Best Practice HV Disconnect/Initialization Feature document.

Based on OEM procedures, the RTS webpage shares information about the ADAS available on a vehicle, where the inputs are located and what events require calibration.

I-CAR’s best practice document, vetted by the industry, explains how to disable and test a vehicle to ensure it is safe to perform repairs.

Autobody News reached out to Center for insight on the new course.

every year since then to ensure the industry is ready for what’s around the corner.

Q: What makes this course unique and what are some of the highlights?

A: The Vehicle Technology and Trends 2023 course is valuable to all members of the collision repair industry. While many other training options are role- or task-specific, this course provides an overview of new vehicles, trends and technologies relevant to all collision repair professionals. With the Technical Tsunami™ we continue to face, the course offers insight into some developments collision repair professionals need to prepare for in their shops.

It also offers a glimpse of 2024 vehicles, upcoming automotive technology and related repair considerations. Being a onehour online course also makes it convenient and accessible to all learners.

Q: Why is it important for the industry to learn about vehicle technology to repair vehicles correctly?

A: There are no shortcuts when performing complete, safe and quality repairs. Modern vehicles are equipped with a tremendous amount of technology and all segments of the industry need to be aware of this

This collaboration also helps us to understand how we can support their networks and reinforce the importance of seeking and following OEM procedures. We collaborate

participation in I-CAR repairability summits. It’s a collaborative process from beginning to end.

Q:What would you like the industry to know about I-CAR’s Vehicle and Technology Specific Training™ portfolio of courses?

A:I-CAR offers a robust group of Vehicle and Technology Specific Training (VTST) courses. The Vehicle Technology and Trends course remains one of our most popular, with application to truly anyone in the automotive industry—from the front desk to the shop floor. Whether it’s the first I-CAR course you take or the 200th, you’ll find the information within the course valuable and relevant.

Credit: Photo courtesy of I-CAR

“There are no shortcuts when performing complete, safe and quality repairs.”

Save the Date For CONNEX Conference

Join CIECA and the collision industry at the 15th annual CIECA conference—CONNEX 2023.

The event is being held Sept. 12-13 at the DoubleTree Hotel by Hilton in Bloomington, IL, and will include insightful and high-profile business and technical speakers, networking opportunities with all industry segments, an NABC Recycled Rides® vehicle gifting, a private factory tour of CIECA member Rivian’s EV plant and CIECA’s Open Annual Meeting and Board Meeting.

The theme of the conference this year is “Connected Car, Connected Industry.” All industry stakeholders, including CIECA members and non-members, are invited to attend. Registration information, hotel details and sponsorship opportunities will be announced soon.

CIECA is looking for thought leaders and industry professionals to present. We invite you to share your knowledge and expertise as we work together to explore emerging issues, forecast for the future, and discuss ways to prepare for the road ahead.

Source: CIECA

Tesla Model S Catches Fire Unexpectedly, Crews Struggle To Extinguish

By Steven Loveday InsideEVs

According to Metro Fire of Sacramento, a Tesla Model S electric sedan caught fire unexpectedly while it was moving at highway speeds in California.

Thankfully, no one was injured by the blaze, but it was difficult for the trained crews to extinguish it.

While EV fires are few and far between compared to gas car fires, they tend to get a lot of attention, and for good reason. EV fires burn extremely hot and often turn into huge blazes rather quickly, sometimes engulfing the cars in flames. Meanwhile, the fire is difficult to put out, and it can reignite over and over. There have even been cases of EVs seemingly reigniting days after an accident, while the cars are parked at a junkyard or investigation site.

Gas car fires happen every day, so they’re not necessarily at the top of the media’s coverage radar. However, there are also many

more gas cars on the road than there are EVs, so it’s still too soon to know how EV fires and gas car fires would stack up if the number of vehicles was even.

It can be argued gasoline is much more volatile and immediately flammable than the lithium-ion batteries in EVs, which are also in laptops, smartphones, tablets and other devices. But the batteries have certain properties that can cause unique issues, which require firefighters to be specially trained to deal with them.

The Sacramento Fire Department tweeted it took about 6,000 gallons of water to put out the Tesla Model S fire. The responders had to lift the EV up to get as much water as possible to douse the battery since it continued to reignite as the work progressed.

According to autoblog, Tesla recommends the use of “large amounts of water to cool the battery.” Several people responded to the fire department’s tweets wondering if a different method

should or could have been used to put out the EV fire more quickly, without the use of so much water.

However, Tesla’s guide says:

“It can take between approximately 3,000-8,000 gallons of water, applied directly to the battery, to fully extinguish and cool down a battery fire; always establish or request additional water supply early. If safety permits, lift or tilt the vehicle for more direct access to the battery.”

The trained firefighters did precisely as Tesla suggests, and were eventually successful. However, as more and more EVs take to our roadways, it’s imperative teams of first responders have special training to ensure the best results in the case of a battery fire.

Encourage Your Representatives To Join the Vehicle Data Access Caucus

The Automotive Service Association (ASA) is asking auto repair shops to send a letter to their U.S. House of Representatives members encouraging them to join the newly established Vehicle Data Access Caucus.

The U.S. House of Representatives Vehicle Data Caucus is a bipartisan group formed by U.S. Rep. Earl “Buddy” Carter, R-GA, and U.S. Rep. Darren Soto, D-FL, to address the issue of vehicle data access.

Carter and Soto are members of the U.S. House Energy and Commerce Committee, which will have jurisdiction for the vehicle data access issue. However, caucus membership is

In their “Dear Colleague” letter, Carter and Soto stated, “With tremendous advancements in technology over the last several years, vehicles are generating increasing amounts of data that can be accessed by a variety of

who can expand or limit services offered, and who will ensure privacy and cybersecurity.”

“The Vehicle Data Access Caucus represents an opportunity to establish national policy on an issue impacting the daily lives of shops across the U.S.,” said Scott Benavidez, ASA board chairman. “Independent repair shops conduct 70% of post-warranty repairs, and it is critical that independent repair shops continue to have access to the vehicle data they need to service these cars.”

ASA is encouraging shops to send a letter to their representatives urging them to join the Vehicle Data Access Caucus. A national, bipartisan

Dynabrade Acquires Global Abrasive Products

Dynabrade, Inc. recently completed the asset purchase of one of its strategic suppliers, Global Abrasive Products, Inc., a 50-employee abrasives converter with locations in Lockport, NY, and Alpharetta, GA.

“For Dynabrade, this is a continuation of our strategic initiative to expand the scope of our vertical integration,” said Dynabrade President Michael Buffamonti “This further elevates our value proposition of becoming the leader in surface solutions and innovative process improvements for industries around the world. With over 1,000 abrasive power tool configurations, and now an abrasive offering for most any application, Dynabrade is in the unique position to provide greater value to our manufacturing

“The Vehicle Data Access Caucus represents an opportunity to establish national policy on an issue impacting the daily lives of shops across the U.S.,”

— SCOTT BENAVIDEZ ASA BOARD CHAIRMAN

SCRS Says Information Providers Taking New Look At Blend Formulas

By John Yoswick Autobody News

The Society of Collision Repair Specialists (SCRS) is having “positive dialogue” with all three estimating system providers regarding refinish blend formulas following an SCRS study last year the association believes demonstrated blending takes more time than a full panel refinish, rather than the 50% less time allocated in the three estimating systems.

At a board meeting earlier this year, Aaron Schulenburg , executive director of SCRS, said CCC Intelligent Solutions and Motor Information Systems, which develops the underlying repair data used by the CCC estimating

research, that was conducted impartially, with a lot of different parties that validated how it occurred, and that it provides enough to get them to do what we’ve asked them to do all along: re-evaluate whether 50% really reflects” what blending requires.

Debate Over Blend Formula Not New

The disagreement over the blend formula stretches back more than a decade; in 2008, for example, the Automotive Service Association issued a position statement arguing blending requires as many procedures as refinishing a new undamaged panel, and calling for the information providers and insurers to acknowledge the additional labor and materials required to facilitate adjacent panel color matching.

Schulenburg said SCRS undertook its blend study because the industry repeatedly asking the information providers to review their formulas—or share details about how they arrived at their formula— over decades didn’t result in any action. The information providers stood by their formulas and said their test results were proprietary, he said at an SCRS open board meeting.

system, have “committed to doing research and replying back to us” by the end of March, and “I think we’re having the same types of positive dialogue with the other two companies.”

He said the companies have said “the amount of pressure they have received since November as a result of this is putting them in a position where they have to look at it, and respond in some way, shape or form,” and the association is “choosing to give them a little latitude to let them go through their processes, because I want to believe that is going to lead to a better outcome.”

“I don’t expect, and I certainly hope that they wouldn’t simply adjust values because any one group said they should,” Schulenburg said. “I would hate to think that any other group might go to them and ask them to lower a value and that they would just do it because they were asked to. What I do think is we provided very meaningful data, very meaningful

“But our members have always said: painting a panel from edge to edge is easier and less time-consuming than it is to create an invisible transition of color to facilitate a color match,” Schulenburg said. “Shops say they can take someone with less skill and teach them how to paint a panel from edge to edge [more easily than] teaching somebody how to create that invisible transition within the panel. That the process takes more time because you’re blending not into a new panel, but an adjacent panel that’s been on the vehicle and collecting road debris and needs to cleaned and masked and prepped in different ways.”

In sharing its blend study findings with the information providers, Schulenburg said, the association also noted changes that have occurred since the information providers’ blend formulas were developed decades ago.

“Colors today are not the same as they were 30 years ago,” he said. “Cars today are not the same as

they were 30 years ago. Consumer expectations today aren’t what they were 30 years ago. It is all so much more complex. The expectations are so much greater. The colors are so much harder, so much richer and

data speaks for itself. They can make their own informed business decisions. Just share the information.”

He said shops can also ask their sales representatives for the estimating systems they use “what their company is doing to address this.”

He said SCRS sees opportunities to address other issues, beyond the blend formula, using a similar process to its blend study.

deeper. Matching them is difficult, and consumers expect more because they spend a whole lot more on their car today than they did 30 years ago. That’s just the reality that we live in.”

Share the Study Findings

He encouraged shops to share the blend study with their colleagues in the industry.

“Don’t encourage them what to do,” Schulenburg cautioned. “The

“There are a lot of issues in the industry where the numbers don’t make sense, where they don’t reflect what our technicians go through, where they don’t reflect the technology changes that have occurred in the equipment or the vehicles,” he said. “I believe we have other studies we can conduct in a similar manner to advance the industry and provide good research and educational material that will inform people.”

Also at the meeting, SCRS said its Blueprint Optimization Tool (BOT), which audits estimates looking for potentially missed operations or line items, now has prompted users within shops to add more than 66,000 operations they are performing to their estimates since the product’s launch in 2020.

SCRS’ Aaron Schulenburg said the association is having “positive dialogue” with all three estimating system providers regarding the association’s blend formula study

“Colors today are not the same as they were 30 years ago. Cars today are not the same as they were 30 years ago. Consumer expectations today aren’t what they were 30 years ago.”

AARON SCHULENBURG SCRS EXECUTIVE DIRECTOR

Hyundai, Kia Launch Anti-Theft Service Campaign

Hyundai and Kia have developed theft deterrent software for millions of their vehicles that lack an immobilizer and will provide it free of charge to vehicle owners.

The software updates the theft alarm software logic to extend the length of the alarm sound from 30 seconds to one minute and requires the key to be in the ignition switch to turn the vehicle on.

BETAG Adds To Senior Leadership Team in North America

The effort is in response to a TikTok social media challenge that has spread nationwide and has resulted in at least 14 reported crashes and eight fatalities. NHTSA urges owners of these vehicles to contact Hyundai (toll-free at 800-6335151) or Kia (toll-free at 800-

333-4542) for information on the free update.

Hyundai will also provide its customers with a window sticker alerting would-be thieves that the vehicle is equipped with anti-theft protection. Hyundai will send the stickers and roll out software updates in a phased approach beginning later in February, with subsequent phases over the next several months.

Kia is also rolling out its free software updates in a phased approach. The company will begin to update vehicles later this month, with ensuing phases throughout the next several months.

Concurrently, the companies have been working with law enforcement agencies to provide more than 26,000 steering wheel locks since November 2022 to 77 law enforcement agencies in 12 states. NHTSA encourages interested vehicle owners to contact local law enforcement to see if a wheel lock is available.

Source: NHTSA

BETAG North America is excited to announce Landon Thompson has joined its senior leadership team.

for Fix Auto USA, responsible for the day-to-day franchise operations for more than 180 collision repair shops, including staff management, operational standards, network performance, franchise compliance, vendor management and insurance performance.

Thompson is a California native, and currently resides in San Diego, CA, with his 9-year-old daughter, Madison. He is an avid sports fan and spends his free time enjoying the beautiful San Diego outdoors and community.

For further information, contact art@betagnothamerica.com.

Source: BETAG North America

Thompson brings a wealth of experience from insurance and collision repair operations, which will offer additional value to BETAG’s customers and industry partners across North America.

Most recently, Thompson was the vice president of operations

Nationwide Catalytic Converter VIN Etching Events Planned To Thwart Theft

Since the start of the pandemic, data trends analyzed by the National Insurance Crime Bureau (NICB) have indicated a drastic increase in vehicle crime across the U.S. Vehicle thefts, carjackings and catalytic converter thefts are all nearing record highs.

To help reduce current catalytic converter theft trends and protect consumers, NICB is partnering with businesses across the U.S. to hold VIN etching events.

“From supply chain disruptions to the exploding market value of precious metals, catalytic converters have become a prime target for thieves across the country,” said David J. Glawe, president and CEO of the NICB. “By attending a local VIN etching event, drivers can add another layer of protection for their vehicles and proactively help deter these crimes from occurring in the first place. ”

NICB, along with partners at Midas in Richmond, VA, and Shaheen Chevrolet in Lansing, MI, recently held VIN etching events in their respective communities.

“I had zero anticipation of a response like this,” said Mark Smith,

owner of Midas of Richmond. “The events are blowing up at our stores, and I mean that in the best of ways. We’re getting multiple, multiple calls a day.”

Catalytic converter thefts increased 1,215% between 2019 and 2022. The converters contain high value precious metals, specifically rhodium, palladium and platinum. The values of these metals have skyrocketed and currently, according to KITCO.com, are approximately:

Rhodium: $12,300

Palladium: $1,784

Platinum: $940

Hours after Smith and local law enforcement held a press conference to announce the new initiative, which involves spraypainting catalytic converters to deter would-be thieves, the appointmentonly time slots scheduled by Midas were booked.

“The more we can make our customers aware of the problem and offer them a solution, the better we can fight this crime,” said Ralph Shaheen, president of Shaheen Automotive Group. “Etching the converter is a start to prevention. It’s inexpensive, only takes a few minutes and is a great service to our customers.”

Though the value of the metals contained in catalytic converters is high, thieves will often receive $50 to $250 per catalytic converter they turn in to recycling facilities.

If you are interested in a local Catalytic Converter Etching event, visit www.nicb.org/news/regionalnews. If no events are currently scheduled in your area, contact a muffler shop that can etch your vehicle’s VIN  on the converter, and spray it with a highly visible highheat paint. Doing so enables the NICB and law enforcement to track the converters.

Should your catalytic converter be stolen, call law enforcement and your insurer immediately.

Source: NICB

Jim Savas Joins Spanesi Americas

Spanesi Americas announced the addition of Savas Communications LLC Principal Jim Savas as a marketing consultant to the Spanesi Americas team. Savas will develop and execute Spanesi-Americas 2023 marketing strategy.

Savas is a seasoned automotive media professional championing Iconic consumer brands including Hot Rod, Motor Trend and National Speed Sports News. On the trade side he led ABRN, Motor Age and Aftermarket Business for 14 years. In Savas’s 40-plus years in the media, he’s successfully lead content teams, driven sale performance and executed marketing objectives.

“I’m very excited to join the Spanesi team, as a global company we’ve made the decision to be digitally focused on our marketing in 2023 and beyond,” Savas said. “I’m looking forward to working with our media partners and executing our strategy.”

Source: Spanesi Americas

Please contact these dealers for your Honda or Acura Genuine parts needs.

Barber Honda Bakersfield

661-396-4235

Dept Hours: M-F 8-5:30 bestchoice@barberhonda com

Capitol Honda San Jose

408-445-4412

Dept Hours: Mon-Sat 7:30-6; Sun 8-5 sbettencourt@penskeautomotive com

Concord Honda Concord

925-825-8016

Dept Hours: M-F 8-6 kevin valenzuela@concordhonda com

Galpin Honda Mission Hills

800-GO GALPIN

818-778-2005

Dept Hours: M-F 7:30-6; Sat 8-2 mteeman@galpin com

Honda of El Cajon

El Cajon

619-440-5851

Dept Hours: M-F 7-6; Sat 7-5 parts@hondaofelcajon com

Honda of Hollywood Hollywood

800-371-3719

323-466-3205

Dept Hours: M-F 8-6 parts@hondaofhollywood com

ACURA

CALIFORNIA

Acura of Concord Concord

925-680-4233

Dept Hours: Mon-Sat 7-6 keith�whisten@cacargroup�com

Acura of Fremont Fremont

888-435-0504

510-431-2560

Dept Hours: M-F 8-6; Sat 8-5 mike ohare@acuraoffremont com

Acura of Pleasanton

Pleasanton

888-985-6342

925-251-7126

Dept Hours: M-F 7:30-6; Sat 8-6 mitch cash@hendrickauto com

Honda of Pasadena Pasadena

800-433-0676

626-683-5880

Dept Hours: M-F 8-6; Sat 8-4

Honda of the Desert Cathedral City

760-770-0828

Dept Hours: M-F 7-6; Sat 7-5 mpartridge@honda111 com

Keyes Honda Van Nuys

818-756-6549

Dept Hours: M-F 8-6; Sat 8-5 malvarez@keyeshonda com

Larry Hopkins Honda

Sunnyvale

408-720-0221

408-736-2608

Dept� Hours: M-Sat 8-5 parts1@hopkinsdirect com

Metro Honda Montclair

800-446-5697

909-625-8960

Dept Hours: M-F 7:30-5:30; Sat 7:30-4 wholesaleparts@metrohonda�com

Ocean Honda Santa Cruz

831-464-1800

Dept Hours: M-F 7-6; Sat 8-4:30 mickw@oceanhondasantacruz�com

Pacific Honda San Diego

858-565-9402 jgardiner@pacifichonda com

AutoNation Acura

Torrance

310-784-8664

310-539-3636

Dept Hours: M-F 7-7; Sat 8-5 alvaradow1@autonation com

Bakersfield Acura

Bakersfield

661-381-2600

Dept Hours: M-F 7:30-5:30 bakersfieldacuraservice@yahoo com

Marin Acura

Corte Madera

800-77-Acura

415-927-5350

Dept Hours: M-F 8-5:30; Sat 8-4 parts@marinacura com

San Francisco Honda

San Francisco

415-913-5125

Dept Hours: M-F 8-5 partsws@sfhonda com

Scott Robinson Honda Torrance

310-371-8320

Dept Hours: M-F 7-6:30; Sat 7-5 mluna@scottrobinson com

Selma Honda Selma

800-717-3562

559-891-5111

Dept Hours: M-F 7-6; Sat 7:30-4:30 hondapartsmgr@selmaautomall com

Larry H. Miller Honda Boise

888-941-2218

208-947-6060

Dept Hours: M-F 7-6; Sat 8-5

Hinshaw’s Honda Auburn

253-288-1069

Dept Hours: M-F 7-6; Sat 7:30-4:30 rickb@hinshaws com

McCurley Integrity Honda

Richland

800-456-6257

509-547-7924

Dept Hours: M-F 8-5:30; Sat 8-4 hondaparts@mccurley net

South Tacoma Honda

Tacoma

888-497-2410

253-474-7541

Dept Hours: M-F 7:30-6; Sat 8-5 bgregory@southtacomahonda com

Metro Acura Montclair

800-446-5697

909-625-8960

Dept Hours: M-F 7:30-5:30 wholesaleparts@metrohonda com

Acura of Honolulu Honolulu

866-931-9086

808-942-4557

Dept Hours: M-F 8-5; Sat 8-4

Johara@lithia com

Tokuda@lithia com

RayleenGarcia@lithia�com

Hinshaw’s Acura Fife

253-926-3331

Dept Hours: M-F 7-6; Sat 8-5 johnny@hinshaws�com

Electrify America Breaks Ground on 75-MW Solar Power Plant in CA

By Iulian Dnistran InsideEVs

Electrify America (EA), one of the largest EV charging providers in the U.S., broke ground on its massive, 75-megawatt (MW) Solar Glow 1 photovoltaic project in San Bernardino County, CA.

project over a 15-year period, shifting away from the usual approach of buying environmental certificates from a third-party supplier on an unbundled basis, which “does less to support additional renewable energy generation.”

In other words, Terra-Gen is building the site and EA is buying the credits associated with it.

purchase agreement (VPPA), EA wants its investment in Solar Glow 1 to make up for an estimated 2 million metric tons of carbon dioxide emissions, or the equivalent of planting nearly 40 million trees.

The National Auto Body Council Body® is proud to announce the Collision Advice Legacy Group Spartan 300 has joined the collision repair industry’s premier philanthropic organization as a level one partner.

The renewable energy plant built by Terra-Gen is expected to go online near the end of the summer with an estimated output of 225,000 megawatt-hours of energy per year.

According to a press release, Electrify America is purchasing and retiring all bundled environmental certificates associated with the new solar

Crash Champions Is NABC Level One Partner

The National Auto Body Council Body® (NABC) is proud to announce Crash Champions has joined the collision repair industry’s premier philanthropic organization as a level one partner.

As a level one partner, Crash Champions and its nationwide network of high-quality repair centers will work alongside an elite consortium of collision repair facilities, rental car companies, parts and materials providers, insurance companies, automotive recyclers, salvage companies, towing companies, industry consultants and more to serve communities across the country with programs that help change and save lives every day.

Operating a rapidly growing coast-to-coast network of highquality collision repair centers, Crash Champions is the largest founder-led MSO in the U.S., serving customers and business partners in 36 states. The company was founded in 1999 by industry veteran and 2022 MSO Executive of the Year Matt Ebert, as a single Chicago repair center.

Source: NABC

“Electrify America has always been focused on driving sustainability forward, which extends beyond electric vehicles and charging and into the energy needed to power the EV revolution. Our customers can feel proud that every charge they make on our network is backed by 100% renewable energy, and today’s groundbreaking of Solar Glow 1 showcases our future and represents our company’s values,” said Rob Barrosa, vice president of technology at Electrify America.

During the 15-year virtual power

“The groundbreaking of Solar Glow 1 is an important step towards additional annual renewable energy generation comparable to the energy used by over 20,000 American homes annually,” said Jigar Shah, EA’s head of energy services.

Electrify America operates 800 EV charging stations in the U.S., with a total of almost 3,500 DC fast chargers and more than 100 Level 2 chargers. According to the company’s website, it plans to open 112 additional stations in the future, which will bring the total to 912 stations countrywide. By comparison, Tesla operates around 1,600 Supercharger stations in the U.S.

As a level one partner, Collision Advice and members of the Spartan group will work alongside an elite consortium of collision repair facilities, rental car companies, parts and materials providers, insurance companies, automotive recyclers, salvage companies, towing companies, industry consultants and more to serve communities across the country with programs that help change and save lives every day. The Legacy Group Spartan 300 brings together likeminded individuals to take a stand for safe and proper repairs, connecting collision repair leaders three times a year in small group, in-person meetings; hosts monthly training webinars to sharpen the skills of shop staff and keep them battle ready; offers 30-minute weekly coaching calls and many more resources; offers a forum that acts outside of paint manufacturer or other vendor influences; and includes access to Mike Anderson and his team.

Source: NABC

Ford Announces Major Changes To Improve Profitability, EVs

By William Johnson Teslarati

Ford on Feb. 15 announced a series of changes and design goals it will be implementing to increase profitability and improve its EV offerings.

Ford’s Q4 earnings report highlighted two major weak points for the company: profitability and quality control. Despite a strong demand for many of its vehicles, particularly its electric offerings, the company saw declines in those two key areas.

To battle these shortcomings, Ford CEO Jim Farley and his team of executives announced a series of changes they hope will revitalize the brand.

According to Reuters, the vast majority of efforts will be aimed at achieving an 8% profit margin on Ford’s next generation of electric vehicles. Compared to rivals, Ford believes it is down by roughly $8 billion in costs, easy to imagine considering the company’s massive $50 billion in planned spending towards electrification.

Planned cost-taming measures

include improving the management of production scheduling, which Ford said could reduce expenses by $2.5 billion alone. Further, thanks to the commodities market finally beginning to cool, Ford is poised to see a decrease in vehicle production costs.

to garner from the company’s new F1 team.

“Why do you think we are doing Formula 1? Because they have the best aero people in the world,” Farley said.

distribution operations.

Ford’s plan of slimming down offerings and improving manufacturing sounds similar to Volkswagen’s initial electrification

More specifically, regarding electric vehicles, Ford aims to produce its new LFP batteries for less than $70 per kWh, a massive leap compared to the NMC batteries Ford currently relies on. The Blue Oval will also be working to reduce battery sizes while maintaining range, thanks to aerodynamics technology it hopes

Ford will also be adopting a technology that has aided Tesla in its efforts to lower costs: large underbody castings. While the company was not specific regarding which vehicles would be receiving these new castings, they could likely be implemented within the next generation of many of its models, and the upcoming SUVs and trucks that Ford said have finalized designs.

Ford executives maintained changes are still coming to its dealership model. Reduced inventories and an increased reliance on online ordering will cut down on costs, further improving profitability. Ford will also be able to implement more changes to manufacturing, supply chain and

strategy put in place by the now departed Herbert Diess. However, unlike Diess, Farley has the backing of his executives and board members, including Bill Ford, who said Farley’s new plan will be “a full court press,” something he believes the company desperately needs.

Ford is at a pivotal point in its history, but unlike the other two Detroit-based brands that constitute “the Big Three,” GM and Stellantis, it has proven time and again it can endure and succeed. Hopefully, that will be the case with electrification, and perhaps, it will lead to faster electrification of the industry overall.

“Why do you think we are doing Formula 1? Because they have the best aero people in the world,”

JIM FARLEY FORD CEO

From Tech To TV Spokesperson/Instructor: The Kevin Tetz Story

By Ed Attanasio Autobody News

Kevin Tetz, 59, is a TV host, internet star and creator of Paintucation University, a video training company that has sold nearly 200,000 instructional DVDs worldwide.

Autobody News sat down recently with Tetz and was inspired by his amazing story from painter to trainer/ mentor and TV personality.

Q: How did you get into the collision repair industry?

A: I grew up in Canada around cars in the automotive restoration and collision repair industries. My dad was a career auto body mechanic and painter, so I kind of grew into it through osmosis. We didn’t have much, and when I needed or wanted a car, I had to build one. So out of necessity, I learned how to hone my own skills and create what I needed.

And then I took a detour from collision and decided to become a rock star. I put about 10 years of my life into that, and when it came crashing down, I went back to what I knew, which was auto body repair. My father was also a musician, and he told me that this trade would probably not make me rich, but collision repair always pay the bills. Of course, he was right.

Q: While you were trying to be a rock star, did you take jobs working at shops along the way?

A: When I was touring with the bands, I tried to make side money, or if the band broke up, I would go to work at a local body shop. So that got me cross-trained while I still had my eye on a different career. I got to work at an exclusive restoration shop in in Venice, CA, and at another high production splash shop in Florida. I learned valuable things such as how to block sand, how to do surface correction, by sanding and polishing on really exclusive cars.

Q: Did you progress quickly by embracing certifications and education during that period?

A: Yes. After music didn’t work out, I went from being a “sander gopher” to working my way up to being a body tech. Then I wanted to open my own shop and I did, and I nearly starved because I didn’t have any business savvy. I was a really good technician, but I did not know how to run a business.

So, I did that and then I was recruited by a local auto body shop in southern Tennessee that wanted me to, ironically, manage their body shop under their leadership. I

seasons and over 200 episodes. I have authored two books, and have been an automotive tech writer for different magazines, using that as a subliminal advertising tool

becoming involved as a training consultant for several different public and private companies, which made me so much better as an instructor.

I love helping people solve problems with paint technologies; it keeps me on my toes! I’m currently working with Axalta Coating Systems creating new training tutorials. I host “Hands On Cars TV” on Amazon Prime and co-hosted “CarCraft TV” last year on MotorTrend Plus. I’m also creating new training courses for people who just want to get better at the trade. I am also creating what I call “internal training,” for body shops that need in-house courses or pre-certification training.

took that job and they sent me to a management training school and to estimating school, where I worked in conjunction with all the claims adjusters in my area who worked for all the big different insurance companies.

Q:

How did you enter the world of broadcast?

A: I never lost that passion for a performance career. I knew I was strong enough in the fundamentals to where I could try and make a video, so I ended up doing a barter deal with a videographer, and I created a video on how to paint a car.

for my instructional videos. So, during that I ended up forming my own production company during my tenure in television, as well as

I’m continually developing new products that fit into the automotive industry, and will continue to expand my product line to include more training guides, tutorials, as well as hand tools. I’m also available for other companies to utilize as a spokesperson, voice over talent or public representative, and hope to expand my experience by offering my services.

For more information about Tetz and Paintucation University, visit www.paintucation.com.

I started out on the DIY Network as a walk-on guest-expert and it grew from there. This was in 2003, so I went to the studios in Knoxville, TN, and I was a good guest, since I was already trained on camera; the music industry helped me with that as well. My first series on DIY was called “Classic Rides,” and I parlayed that into another show on Spike TV called “Trucks!,” where I did 10

“I love helping people solve problems with paint technologies, it keeps me on my toes!”

KEVIN TETZ FOUNDER OF PAINTUCATION UNIVERSITY

Kevin Tetz is the founder of Paintucation University and has sold nearly 200,000 paint training videos in the last two decades.

CCC® ONE To Integrate With CDK System

CCC Intelligent Solutions Inc., announced Jan. 31 its CCC® ONE Repair Workflow shop management solution is now available to dealerowned collision repairers via an integration with CDK Global’s dealer management system (DMS).

The integration will connect two systems mission-critical to dealer and repair center operations, streamlining repair management and creating visibility from the inception of the repair to billing. CDK Global is a leading automotive retail software provider. The new integration between CCC ONE and CDK’s DMS will allow the synchronizing of information like repair order numbers, customer and vehicle details, repair history and accounting data, creating a smoother process for dealerships and minimizing manual steps to reconcile ledger entries.

“We’re very pleased to create an integration with CCC Intelligent Solutions, giving our dealers the option to seamlessly access their repair management solutions,” said Sandy Orlando, senior vice president, CDK Data Services and Fortellis.

Source: CCC Intelligent Solutions Inc.

Tesla Recalls 362K Full Self Driving Vehicles, Fault To Be Fixed Through OTA Update

By Simon Alvarez Teslarati

Tesla has initiated a recall for 362,758 vehicles equipped with the company’s Full Self-Driving (FSD) Beta system. The recall was posted on the National Highway Traffic Safety Administration’s (NHTSA) official website.

The FSD Beta recall covers certain 2016-2023 Model S, Model X, 2017-2023 Model 3, and 2020-2023 Model Y vehicles equipped with the automaker’s Autosteer on City Streets feature, better known as Full Self-Driving Beta or FSD Beta.

As per the NHTSA, the FSD Beta fault may result in a vehicle exceeding the speed limits of inner city roads. It may also result in vehicles traveling through intersections in an unlawful or unpredictable manner. Such tendencies may increase the cause of crashes.

“The FSD Beta system may allow the vehicle to act unsafe around intersections, such as traveling

straight through an intersection while in a turn-only lane, entering a stop sign-controlled intersection without coming to a complete stop, or proceeding into an intersection during a steady yellow traffic signal without due caution.

and the NHTSA then met several times to discuss the agency’s concerns, as well as the electric vehicle maker’s proposed overthe-air software improvements to address the issue.

On Feb. 7, despite not concurring with the agency’s analysis, Tesla administered a voluntary recall out of an abundance of caution. The NHTSA said as of Feb. 14, Tesla had identified 18 warranty claims received between May 8, 2019, and Sept. 12, 2022, that may be related to the FSD Beta fault. No injuries or deaths have been related to the potential issue.

“In addition, the system may respond insufficiently to changes in posted speed limits or not adequately account for the driver’s adjustment of the vehicle’s speed to exceed posted speed limits,” the NHSTA wrote.

Per the NHTSA’s Safety Recall Report, Tesla contacted the agency about a potential issue related to FSD Beta in late January. The company was advised by the NHTSA to file a recall notice. Tesla

Similar to most Tesla recalls, the FSD Beta fault would be fixed through an over-the-air software update.

“Tesla will release an over-theair (OTA) software update, free of charge. Owner notification letters are expected to be mailed by April 15, 2023. Owners may contact Tesla customer service at 1-877798-3752. Tesla’s number for this recall is SB-23-00-001,” the agency said.

Ford Uncovers F-150 Lightning Battery Problem, Production To Resume in Weeks

By Steven Loveday InsideEVs

Ford has reportedly figured out what caused a battery issue in the F-150 Lightning electric pickup truck that has temporarily halted production and shipping to dealers.

Subaru Recalling Certain 2023 Solterra SUVs For Hub Bolt Repairs

end of the week of Feb. 20, and use what it learns in the battery production process going forward, which could take a few weeks. The automaker doesn’t anticipate any related recalls.

When the production shutdown was first announced Feb. 14, Ford spokesperson Emma Bergg said Ford became aware of the potential issue during a pre-delivery quality inspection and issued the stop shipment order early in the week of Feb.

6. The carmaker hadn’t been apprised of any real-world incidents or problems related to the possible battery concern.

The company doesn’t believe the problem impacts trucks already delivered to dealers, and it says production should resume in a few weeks.

Ford reached out to Electrek and said it hopes to be done with its root-cause investigation by the

The F-150 Lightning is one of only three fully electric trucks currently available on our shores. Available competitors include the Rivian R1T and GMC Hummer EV. The Ford full-size electric truck carries a starting price of around $56,000.

Subaru of America, Inc. on Feb. 13 announced a safety recall on select 2023 Subaru Solterra vehicles.

The issue affects 1,182 model year 2023 Subaru Solterras. These vehicles were the subject of an earlier recall requiring the replacement of original hub bolts. Subaru identified an issue with vehicles repaired at two port locations by one particular team of contractors. The teams did not properly complete the repair procedure, resulting in the potential for significantly under-torqued bolts.

Out of an abundance of caution, Subaru is recalling all vehicles repaired at all port locations supported by the third-party contractor.

Vehicles without the original hub bolt concern and

will inspect the hub bolts and, if necessary, retorque to the specification at no cost to the customer. Until the inspection/remedy is completed, do not drive the vehicle. Customers will be instructed not to drive their vehicle and to contact their retailer to have the vehicle towed for inspection. Towing will be offered at no cost to the customer.

Vehicle owners will be contacted by mail. To find out if a vehicle is affected, go to subaru.com/recalls. Vehicle owners can also visit NHTSA. gov/recalls and enter their 17-digit vehicle identification number for more information on this recall. Alternatively, call the Vehicle Safety Hotline 888-327-4236, Monday to Friday 8 a.m. to 8 p.m. ET; Hearing Impaired (TTY): 800-

Critical Nature of ADAS Functionality Could Result in More Vehicle Safety Inspection Programs

By John Yoswick Autobody News

About 15 states currently have some sort of periodic safety inspection for vehicles, but with drivers increasingly reliant on ADAS features, those existing state programs likely need to evolve—and more states are likely to want to find ways to ensure driver assistance features are functioning properly.

That was the consensus among panelists at a discussion during a recent Collision Industry Conference (CIC).

“With the advent of more semiautonomous vehicles, automatic driving features, in my opinion this is going to come to pass at some point,” said Chuck Olsen of AirPro Diagnostics. “This is going to have to be addressed for the safety of the motoring public. In my opinion, we need to be involved as an industry so that we make sure it is done right, not just have legislation coming at us that isn’t correct.”

Olsen said having spent much of his career on the mechanical side of the industry, he thinks “collision shops are better equipped to perform a periodic type of inspection than the classical mechanical shop.”

rate of vehicle fatalities.

“That may not sound like very much, but there’s 30,000 fatal crashes every year in the United States, so that means 1,400 passenger lives per year could be saved,” Dell said. “That’s the equivalent of a few airplane crashes. We’re using this information to try to educate policymakers and legislators around the country. And we’re having some success. I think we’re seeing movement in states taking a new interest for the first time in decades.”

Rather than a patchwork of programs that vary widely by state, Dell said he’d prefer the National Highway Traffic Safety Administration develop national standards or guidelines for the programs, and there are efforts under way to get federal funding and a mandate for NHTSA to at least study the issue.

“Barring that, I think what you will see is leadership from a few states that will help others come along,” Dell said.

hated the program at first because almost every vehicle was failing the safety test.

“But they have gotten smarter about what to look for in the vehicles they are buying to sell,” he said of the dealers. “Fast forward to today, and we don’t see as many safety issues as we did when we first started this. The dealers are now excited about the law. They like what it does for their product and for the consumer. Consumers like it because they know exactly what they’re buying.”

Inspections Could Improve Repairs

Another panelist, Mark Olson of VECO Experts, agreed with others that, given the importance of maintaining the functionality of ADAS, he foresees more states conducting periodic vehicle safety inspections in the future.

“In the next 10 years, annual inspection of safety systems on cars is going to become very real,” Olson said. “In my opinion, we’re not going to escape it.”

Regulators will start to recognize, he said, that less safe vehicles are being brought into states without such programs by those who know

those vehicles will fail the inspection required in their current state.

“If they know it’s not going to pass in New Mexico, they’re going to kick it off to Idaho or Montana where there isn’t an inspection,” Olson said, saying he sees a similar shift in vehicles that can’t pass an emission test into states without such tests. “That’s why having a nationwide scenario might be a really good idea. I’m not saying I’m in favor of the government doing anything. But it may take that.”

Regular safety inspections could also help ferret out incomplete or poor quality collision repair work, Olson said.

“If you can’t get the vehicle tags renewed without passing, that would actually bring the level up in our industry,” he said.

New Study Fuels Interest

Bill Dell of Opus Inspections said required vehicle inspections— whether for safety or emissions— can be a challenge to get enacted because they can be viewed as a new tax or a politically unpopular mandate. But a new study released this past fall by Carnegie Mellon University may help change that.

Dell—who disclosed that his company was one of the sponsors of the three-year, peer-reviewed study— said the study looked at 44 years of accident data, comparing states with vehicle safety inspections to those without. It found the states with such programs experienced a 5.5% lower

Shop Owner Conducts Inspections

Another panelist at CIC, New Mexico shop owner Scott Benavidez, has some experience conducting a state-mandated vehicle safety inspection. Since 2016, New Mexico has required anyone selling a used vehicle to disclose if that vehicle has sustained damage exceeding 6% of its value. Benavidez said he has about a half dozen inspectors looking at more than 7,000 used vehicles a year, primarily for used car dealers.

“We rewrite an estimate based on how much damage we think it had, and if there’s any safety-related issues to it,” Benavidez said. “Then they can disclose that, so the consumer knows what they’re buying, or about 90% of the time, the [dealer] gets [safety issues] fixed. It’s interesting what we find. It could be something as simple as someone [who repaired a vehicle] not putting a [bumper] absorber back in. We see that a lot.”

Benavidez said used car dealers

Bill Dell of Opus Inspections said a new study released this past fall by Carnegie Mellon University found the states with vehicle safety inspections programs had a lower rate of vehicle fatalities.

New Mexico shop owner Scott Benavidez said consumers like his state’s inspection program for used vehicles prior to a purchase because they know exactly what they’re buying.

“In the next 10 years, annual inspection of safety systems on cars is going to become very real. In my opinion, we’re not going to escape it.”

MARK OLSON VECO EXPERTS

Ram Reveals All-Electric Ram 1500 REV, Opens Online Reservations

The Ram Truck brand unveiled its highly anticipated all-new Ram 1500 REV battery-electric truck for the first time Feb. 12 as part of the brand’s Big Game efforts.

The commercial also signaled the official opening of customer reservations for a place in line to per-order the truck at RamRev.com.

The 60-second commercial, “Premature Electrification,” which aired early in the fourth quarter of the game, was released earlier that day across Ram’s social media channels. The spot features Emmynominated actor Jason Jones (“The Detour,” “The Flight Attendant,” “The Daily Show”) as he addresses headon some potential electrification anxieties that consumers may have about purchasing an all-electric vehicle, including range, power and payload.

“We created this commercial to speak directly to Ram truck owners and potential truck owners to bring some lighthearted humor to the high-tech, EV conversation, which rightfully takes itself very seriously,” said Olivier Francois, global chief marketing officer, Stellantis. “As we open reservations today for a

place in line to pre-order the allelectric Ram 1500 REV, we wanted to directly address any potential concerns about EV truck ownership using an approach that we believe will resonate with our truck-buying consumers.

“The intent of the spot is to let our buyers know that we have listened to their concerns as part of our dialogue with them over the last several years as we prepare to introduce the all-electric Ram 1500 REV to the market in 2024.”

With reservations open for a place in line to pre-order the Ram 1500 REV, it is paramount for the brand that Ram 1500 REV buyers have the same level of confidence in their Ram truck purchase that they’ve always held for the brand.

As the Ram brand’s awardwinning lineup expands to include the Ram 1500 REV, the brand is giving its owners more choices than ever to fit their individual truck needs, with the intention to deliver the right EV truck at the right time.

In addition, the Ram brand kicked off the Rev Insider+ paid membership program. For a one-time $100 refundable fee, the program unlocks

privileges that include a chance to reserve a place in line for pre-order and exclusive access to events, news and information about the Ram 1500 REV. Fees are refundable up until the Rev Insider+ paid member is notified by Ram via the email provided at sign up that the Ram 1500 REV has become available for early access pre-order.

Consumers can learn more about becoming part of the Ram Revolution today by visiting RamREV.com.

With the first appearance of the Ram 1500 REV, “Premature Electrification” continues the Ram Truck brand’s electrified journey, redefining the pickup truck segment. Ram’s commitment to adding electrification solutions to its portfolio supports the Stellantis Dare Forward 2030 strategic plan to lead the way the world moves by delivering innovative, clean, safe and affordable mobility solutions.

“Premature Electrification” was created by the Ram Truck brand in partnership with Chicago-based agency Highdive and awardwinning director Ric Cantor and was produced by Interrogate.

Source: Ram Truck Brand

CIECA Announces 2023 Board Officers

During the Collision Industry Electronic Commerce (CIECA) Board of Trustees meeting in Palm Springs, CA, on Jan. 18, the organization’s Board of Trustees elected the following officers for 2023: Chair Greg Best, senior business analyst, California Casualty; Vice Chair Ashley Denison, chief information officer, Caliber Collision; Treasurer Brady Bonner, vice president of client sales and support, Safelite Solutions; Secretary Kim DeVallance Caron, global product portfolio director, Enterprise Holdings; and Past Chair Phil Martinez, senior technical consultant, Mitchell International, an Enlyte company.

The officers will serve on CIECA’s executive committee, which oversees business matters throughout the year and plans the agenda for CIECA board meetings.

Best encourages all industry partners to engage with CIECA as the organization continues to evolve the standards to meet the changing technology needs of the industry.

Source: CIECA

Showing The Love: Drivers Find Lower

Gas Prices

By Andrew Gross AAA

The national average for a gallon of gas dropped another week, falling six cents to $3.43 as of Feb. 9.

Pump prices have fallen every day since Jan. 28. Fewer people fueling up, and lower costs for oil, are behind the price dip.

“Drivers may have a little more in their wallets as we head toward Valentine’s Day,” said Andrew Gross, AAA spokesperson, “and if gas demand and oil costs remain low, drivers will likely see pump prices drop through next week.”

According to new data from the Energy Information Administration (EIA), gas demand dipped slightly from 8.49 million to 8.43 million b/d in the week before Feb. 9. The current gas demand rate is approximately 700,000 b/d lower than the rate during the first week of February 2022, helping to explain why gas prices are declining.

Meanwhile, total domestic gasoline stocks increased significantly by 5 million bbl to 239.6 million bbl over the same week. If gas demand remains low amid growing total domestic stocks, pump prices will drop further. The Feb. 9 national average of $3.43 is 15 cents more than a month ago, but 3 cents less than a year ago.

Since Feb. 2, these 10 states have seen the largest decreases in their averages: Delaware (-15 cents), Ohio (-11 cents), Maryland (-11 cents), Tennessee (-11 cents), Alabama (-10 cents), South Carolina (-10 cents), Wisconsin (-10 cents), Florida (-10 cents), Virginia (-9 cents) and Texas (-9 cents).

The nation’s top 10 least expensive markets: Texas ($3.03), Mississippi ($3.09), Missouri ($3.10), Kentucky ($3.11), Arkansas ($3.11), Oklahoma ($3.12), South Carolina ($3.13), Tennessee ($3.14), Louisiana ($3.16) and Kansas ($3.16).

Source: AAA

Mitchell Publishes EV Collision Insights Report

Mitchell, an Enlyte company, on Feb. 15 announced the availability of its latest trends publication: Plugged-In: EV Collision Insights. The new quarterly report provides auto insurance and collision repair executives with up-to-date information on electric vehicle claims and market data.

In 2022, EV sales hit a tipping point, representing 5.6% of all new vehicles sold, according to Kelley Blue Book. As consumer adoption increases, vehicle manufacturers including Audi, GM and Volvo are pledging to go all-electric in the future—putting more of these automobiles on the road and, potentially, in a collision repair shop. “EVs introduce some unique challenges to both insurers and repairers,” said Ryan Mandell, director of claims performance at Mitchell. “Their more complex, interconnected electronic systems and reliance on lightweight materials can complicate the repair process and increase claims costs. With the release of our new report, we hope to provide the industry with the information it needs to prepare for this growing segment

CALIFORNIA

Audi Burlingame Burlingame

888.737.5738

650.348.0883

650.348.0837 Fax

M-F 7:30am-4:30pm parts@rectormotors.com

Audi Rocklin Rocklin

866.948.0048

916.836.1286

916.836.1293 Fax

M-F 7:30am-6pm Sat 8am-5pm parts@audirocklin.com

Audi Long Beach Long Beach

562.597.4892

562.343.5088 Fax

M-F 7:30am-5pm wholesale@audilb.com parts@audilb.com www.audilb.com

of the car parc and the impact it will have on auto insurance claims.”

Based on data from Q4 2022, the inaugural issue of Plugged-In: EV Collision Insights documents an increase in the:

• Number of EV repairable claims of 1.1% in the U.S. and 2.26% in Canada

• Average percentage of EV parts repaired, suggesting collision facilities may be improving their ability to repair the lighter weight substrates common in these automobiles

• Average number of mechanical hours on EV estimates of 1.7 as compared to labor time listed on collision damage appraisals for vehicles with internal combustion engines

• The report also features current claims data on EV average repairable severity, repairable claims frequency by market, and frequency by vehicle manufacturer and model.

To access the report, visit www. mitchell.com/plugged-in. You can also subscribe to future issues by completing the web form.

Source: Mitchell

Niello Audi Sacramento

916-480-2851

916.483.1963 Fax

M-S 8am-5pm audi.parts@niello.com www.audi.niello.com

Santa Monica Audi Santa Monica

310.481.8216

310.393.6982 Fax

M-F 7:30am-5pm

wholesale@santamonicaaudi.com www.santamonicaaudi.com

WASHINGTON

Audi Seattle Seattle

206.634.8200

206.547.1581 Fax

M-F 7am-6pm parts@uvwaudi.com www.audiseattle.com

Regardless of the age of your customer’s Audi, Audi dealers have access to over 200,000 part numbers and are supported by a nationwide network of distribution centers to help ensure non-stocked parts are delivered the next day.

Order Audi Genuine Parts from these select dealers.

Audi Part Professionals are experts on collision parts, replacement components and mechanical items

Collision Repairers Should Invest Now in ‘People, Capacity and Innovation’

By Abby Andrews Autobody News

Auto body shop owners and managers must be aware of and ready to face the long-term effects of the COVID pandemic, said Sean Carey, president of SCG Management Consultants, in his Jan. 26 presentation, “The New, New Normal and the Impact to the Claims & Collision Industry,” part of CIECA’s webinar series.

“We are now in the ‘COVID tail,’ starting to see issues cropping up,” Carey said.

The full presentation is available on www.cieca.com.

Macro Market Forces

Carey said he thinks the industry is getting to a point where OEM certification programs are becoming “equally important” as the insurance companies’ DRPs. While he thinks both will have a place in the industry, “we’re witnessing the slow death of the DRP.”

“[OEM certification programs] will become the true North Star for our industry, as repairers want to do the right thing,” Carey added.

Carey said OEM repair information is currently not “terribly usable,” but he predicts new entrants in the market will find better ways to consolidate it, which the automakers will support.

Carey predicted the “big will get bigger,” as MSOs, OEMs and insurers consolidate.

Consequences of COVID 20202022

During the lockdown and subsequent recovery period, 2.3 million vehicles weren’t repaired, representing $7.8 billion revenue that didn’t enter the supply chain. Carey said parts suppliers took the biggest hit—$4.4 billion in lost sales.

Carey predicted about 3,500 shops will close in the next 12 to 24 months.

“The No. 1 reason: not enough people to repair cars,” he said. “Many organizations are trying to recruit, but we’re not going to fill that gap. We’ll simply run out of folks.”

Small shops will lose existing employees to larger ones, Carey said. Within three years, he predicted, the average repair cost will be $6,500, and more than half of a repair order will be parts, as they become more expensive than labor.

Micro Challenges

The biggest near-term challenge is people, Carey said. “We have reached

the point of no return; the aging tech base is far outstripping the number of young people coming in,” he said.

He advised listeners to “focus on the people you have, nurture them; they will be much harder to replace.”

waiting time for parts.

“This is about repair planning based on capacity, where insurers and shops, vendors and shops are talking to each other,” Carey said.

Far Horizon Timeline

Carey said 2022 was “a very different year for most of us; let’s not think for one moment that we’re going back to 2019, because that ship has sailed.”

2023 will bring a new set of challenges, as OEMs double down on safe and proper repairs, insurers introduce new claims solutions, MSOs continue to grow and costs continue to pick up, meaning shops will need to pick vendor partners carefully.

payers. If certified repairs are not yet required by 2026, the industry will be solidly on the path to that, Carey said.

After the presentation, an attendee asked Carey what he would do today if he were a shop owner.

First, Carey said, he’d develop an agreement with current staff making it beneficial for them to stay and challenging to leave.

Another near-term challenge continues to be parts and the supply chain. Production bottlenecks are easing, but shops are still dealing with delays. Carey suggested shops balance their vehicle intake— otherwise cycle time, work in progress (WIP) and costs will soar.

Carey said OEMs will solve the problem in the next few years of how to make seamless claims more capable, thanks to the telematic data resulting from the “onslaught of technology” OEMs are introducing in their vehicles. “Insurers’ AI and mobile models can’t compete,” he said.

Finally, shops will reach an economic breaking point. “There is no longer room for shops to absorb large expenses, repair safely and properly and stay profitable,” he said.

2023 Market Sizing

Looking ahead to 2023, Carey predicted a lower repair count, but more parts and a higher average cost, as the total market will crest $40 billion for the first time.

The average repair cost will increase to $4,750 this year, Carey said, and insurance premium increases may not be enough to cover the cost of losses.

There will be $9.5 billion of work in progress, as shops don’t have the people, parts or space to finish jobs.

Future Market Prevailing Conditions

The industry is at a capacity crunch, Carey said. “We used to try to capture every single job,” he said. “We are entering a market where you’re trying to get the right job.”

Workflow efficiency will become king and intake will be critical, as Carey predicted repairers will have to validate everything to receive fair compensation, from storage time to

Looking ahead to the next three years, Carey said 2024 will be when “the fallout begins,” as staffing reaches critical levels, shops begin closing and new technology speeds up first notice of loss and intake.

In 2025, a “new market emerges,” Carey said, riding a wave of new vehicles with new technologies, and finally, in 2026, vehicle data will dictate repairs and OEM-embedded insurance will lead to a change in bill

Next, he would look at how he brings in vehicles for repairs, and any “key triggers” for not accepting one. And finally, he would be “watching like a hawk for opportunities to work closer with insurers, suppliers and OEMs.”

“Take a good step back every now and then and identify: ‘What should I be doing differently to be more efficient?’” Carey advised. “Without a question, people, capacity and innovation.”

“We used to try to capture every single job. We are entering a market where you’re trying to get the right job.”

SEAN CAREY SCG MANAGEMENT CONSULTANTS

Credit: Shutterstock.

NO. CALIFORNIA

Concord Kia

Concord

(888) 811-3058

(925) 685-2952 Fax

M-F 8am - 5:30pm

Sat 9am - 1pm

Rosesville Kia

Roseville

(916) 783-8129

(916) 783-1005 Fax

M- F 7am-6pm Sat 8am-4pm

parts@rosevillekia.com

www.rosevillekia.com

SO. CALIFORNIA

AllStar Kia

San Bernardino

(909) 763-4755

(909) 763-4744 Fax

M-F 8am - 6pm Sat 8am - 2pm

parts@allstarkia.net

www.allstarkia.net

Car Pros Kia Glendale

Glendale

(818) 745-1103

(818) 244-0017 Fax

M-F 7am - 6pm

duncan@carpros.com

Car Pros Kia Huntington Beach

Huntington Beach

(714) 274-6178

(714) 847-4410 Fax

M-F 7am - 6pm Sat 8am - 4pm

jasonr@carpros.com

Citrus Kia Ontario

(800) 583-7042

(909) 390-0948

(909) 390-0982 Fax

scunningham@citrusmotors.com www.citrusmotors.com

M-Sat 7am - 6pm

Free Local Delivery

Ask for Ike, Jimbo, Chris, Juan, Sean, Jeff Se Habla Español

Kearny Mesa Kia

San Diego

(800) 635-6669

(858) 560-5033

(858) 560-9648 Fax

Largest wholesaler in San Diego with 17 delivery trucks

Kia of Alhambra

Alhambra

(626) 289-7803

(626) 289-8807 Fax

kip@kiaofalhambra.com

Kia of Carson Carson

(310) 221-9101

(310) 507-8595 Fax

M-Sat 7am - 7pm Sun 8am - 5pm

www.KiaofCarson.com

Kia of Downtown LA Los Angeles

(213) 342-0923

(213) 342-0980 Fax

M-F 7am - 7pm

www.kiaofdtla.com

Kia of Irvine Irvine

(855) 847-3592

(949) 777-2342 Fax

North County Kia Escondido

(760) 945-9939

(866) 888-3074 Fax

parts@autogrp.com www.northcountykia.com

M-F 7am - 6pm

In San Diego Over 10 Years

NEVADA

Jim Marsh Kia

Las Vegas (877) 274-3820

(702) 946-6084 Fax

M-F 8am - 6pm Sat 8am - 2pm

johnd@jimmarshauto.com

Towbin Kia

Henderson

(702) 868-1234

(702) 567-0037 Fax

M-F 7am - 6pm Sat 7am - 4pm

jmoore@towbinkia.com

www.tkwholesale.com

WASHINGTON

Car Pros Kia Renton Renton

(425) 204-6635

(425) 793-3889 Fax

M-F 7am - 6pm

Sat 8am - 5pm jgaeir@carpros.com

Lee Johnson Kia Kirkland

(425) 823-0188

(425) 284-1790 Fax

M-F 7am - 5:30pm

Sat 7am - 5pm

tthompson@leejohnson.com

*Kia Genuine replacement parts sold but not installed by an Authorized Kia Dealer are covered for 12 months from purchase date, regardless of mileage, for the part only, and any labor charge is the consumer’s responsibility.

Genuine Kia Parts* are specifically manufactured from original engineering specs to ensure the same exceptional quality, performance and safety as when you first drove your Kia off the lot. Plus, they’re covered by our 12-month Replacement Parts Limited Warranty.

Exploding Airbag Warning: Stop Driving 2001-2003 Honda Vehicles

By David A. Wood CarComplaints.com

Honda is warning owners of recalled 2001-2003 Acura and Honda vehicles to park the vehicles and stop driving them if the Takata airbags have not been replaced during previous recalls.

these models that need new airbag inflators:

2001-2002 Honda Accord

2001-2002 Honda Civic

2002 Honda CR-V

2002 Honda Odyssey

2003 Honda Pilot

2002-2003 Acura 3.2 TL

2003 Acura 3.2 CL

However, a customer can verify if their Acura or Honda vehicle is included by using the vehicle identification number (VIN) at www. recalls.acura. com or www. recalls.honda. com.

Years of warning owners to get the free repairs completed by dealers caused Honda to issue this latest warning to stop driving the vehicles if they have not been repaired.

Included in the warning are

After at least 17 deaths and more than 200 injuries blamed on exploding airbags in Honda vehicles, the automaker is still trying to convince owners of the older models to complete the free recall repairs.

Owners can arrange free towing and have access to free loaner or rental vehicles.

Known as Takata “Alpha” airbags, Honda said the airbag inflators suffer a 50% failure rate in the older vehicles. The metal inflators explode and become grenades that shoot metal fragments into vehicle occupants.

According to Honda, its “relentless recall efforts” to owners of vehicles equipped with Alpha inflators include:

• 8.9 million mailed notifications to registered owners

• 5.4 million live and automated phone calls

• 2.3 million emails

• 916,000 text and online messages

• 794,000 in-person visits seeking to locate owners

Honda said even after years of Takata recalls, more than 8,200 owners of the older models still have not responded.

Owners of these vehicles should immediately contact a Honda dealer or call the automaker at 888-234-2138.

CREF Benchmark Grants Applications

The Collision Repair Education Foundation (CREF) seeks to alleviate some of the financial burdens on behalf of the instructors educating the industry’s future workforce by filling those gaps through its 2023 Collision School Career Readiness Benchmark Grants. Completing CREF’s online application will qualify collision schools to receive up to $25,000 in funding.

In 2022, the industry’s generous support enabled CREF to award $436,000 in Benchmark Grants to nearly 70 collision schools, impacting more than 35,000 students. Additionally, CREF distributed more than $10 million worth of in-kind donations, including parts, products, quarter panels, subscriptions, safety equipment and more.

Applications opened Feb. 7 with a deadline of June 28. Visit www. collisioneducationfoundation. org/collision-repair-educationfoundation-benchmark-grant/

Source: CREF

Improved Inventory Levels, Higher Fleet Sales Expected To Support Improving January Auto Sales

New-vehicle sales in January are expected to show a surprising gain when announced, even though market conditions have not appreciably changed. The January 2023 auto sales pace, or seasonally adjusted annual rate (SAAR), is expected to finish near 15.6 million, a large increase from December’s 13.3 million pace, according to a forecast released Jan. 26 by Cox Automotive. However, some of the gain is due to statistical adjustments that correct for expected fewer sales in January and February. With inventories improving daily, sales in January will benefit, increasing the sales pace. Sales volume for the month is expected to rise nearly 3% over January 2022’s inventoryconstrained market but with the same number of selling days.

January sales are expected to fall almost 20% month over month, largely due to three fewer selling days than December and the usual post-holiday drop in activity.

As we start 2023, high interest

appear to be falling away.

According to Charlie Chesbrough, Cox Automotive Senior Economist: “After a slow December, a return to ‘normal’ would be welcome. With inventories improving, and more fleet activity likely, we are expecting an increase in January new-vehicle sales activity. Though some dealer lots across the country have ample inventory, some Asian brands continue to have extremely limited availability. One of the key questions for the market this year is whether some brands—particularly American ones—will be forced to increase incentives to keep supply from getting too high.”

January 2023 Sales Forecast Highlights. Light new-vehicle sales are expected to rise 2.7% from January 2022 but fall 19.8% from last month. The SAAR in January 2023 is estimated to be 15.6 million, above last year’s 12.7 million level and up from December’s 13.3 million pace. January 2023 has

Jay Leno Breaks Several Bones in Motorcycle Crash

By Thanos Pappas CarScoops

Jay Leno seems to be going through a period of bad luck lately. After suffering seconddegree burns in a garage fire in November, the comedian had a new accident with a vintage motorcycle, leading to a few injuries.

Thankfully, the 72-year-old celebrity is recovering well and still plans on performing this weekend in Las Vegas.

Leno first talked about his motorcycle accident during an interview with the Las Vegas Review-Journal. The incident took place Jan. 17, as he was testing a vintage 1940 Indian motorcycle.

During the test drive, he noticed a smell of gasoline, which prompted him to check for leaks.

“So I turned down a side street and cut through a parking lot, and unbeknownst to me, some guy had a wire strung across the parking lot but with no flag hanging from it,” Leno said. “So, you know, I didn’t see it until it was too late. It just clotheslined me and, boom, knocked me off the bike.”

As a result of the fall, the comedian suffered a broken collar bone, two broken ribs and two cracked kneecaps. While those injuries sound serious--and painful---Leno assured everyone he is OK now. He also confirmed he will be working this weekend doing his stand-up shows in Las Vegas as planned.

The comedian didn’t openly discuss his motorcycle accident prior to this interview because of the massive amount of media coverage of his recent burns.

Kearny Mesa Subaru San Diego (800) 548-9124

(858) 300-3331 Fax

Mon.-Fri. 7-6

cguth@kmhyundaisubaru.com

www.kearnymesasubaru.com

Subaru of San Bernardino San Bernardino (909) 888-8686

(909) 571-5483 Fax

Mon.-Fri. 7:30-7; Sat 7:30-5 parts@subarusb.com www.sbsubaru.com

Elk Grove Subaru Elk Grove (877) 475-0659

(916) 509-8559 Fax

Mon.-Fri. 8-6

shawnh@elkgrovesubaru.com www.elkgrovesubaru.com

Santa Cruz Subaru Santa Cruz (888) 844-7131

(831) 420-1402

(831) 420-1923 Fax

Mon.-Fri. 7:30-6; Sat. 8-5 parts@santacruzsubaru.com www.santacruzsubaru.com

Eastside Subaru Kirkland (425) 820-1676

Mon.-Fri. 7-4 ldarwin@eastsidesubaru.com

Kendall Subaru of Marysville

Marysville

Parts Hotline (866) 662-2819 (360) 716-2553 24 Hr Fax Mon.-Fri. 7-6; Sat. 8-4:30 wholesaleparts@kendallauto.com

scotteney@kendallauto.com

www.kendallsubarumarysville.com

Luxury Share of New-Vehicle Market Sets Record in January

The average transaction price (ATP) of a new vehicle in the U.S. declined slightly in January to $49,388, a decrease of 0.6% ($310) from December’s record high and up 5.9% ($2,768) from levels one year earlier.

New-vehicle inventory levels are increasing from historic lows in early 2022, but prices remain elevated, according to data released Feb. 13 by Kelley Blue Book, a Cox Automotive company.

overall average price elevated.”

Incentives remain low compared to pre-pandemic years, but they are trending upwards as inventory improves. The most affordable vehicles—compact cars, compact SUVs and subcompact cars—had incentives between 3% to 4%, which is above industry average. High loan rates and continued inflationary pressures appear to be hurting the lower part of the market, so automakers are more focused on

though luxury ATP declined.

In January, the average luxury buyer paid $65,953 for a new vehicle, down $1,560 from December. Buyers continue to pay over MSRP for new luxury vehicles, but not by much.

Luxury vehicle ATPs were a mixed bag in January, with luxury cars, luxury compact SUVs and luxury mid-size SUVs showing price declines between 0.4% and 1.4%. Entry-level luxury cars, high-end luxury cars and luxury full-size SUVs all saw price increases between 1.3% and 4.8%.

Mercedes-Benz and Lexus showed the most price strength in the luxury market, transacting between 1.4% to 4.8% over sticker price last month.

Luxury brands Audi, BMW, Infiniti, Lexus, Lincoln and Volvo showed the least price strength, selling 1% or more below MSRP in January.

Led by Tesla, EV Prices Decreased Notably in January, Continuing a Downward Trend

According to Kelley Blue Book calculations, new-vehicle ATPs have been above the average manufacturer’s suggested retail price (MSRP), also known as the sticker price, for more than a year. In January, the average price paid was $310 more than the average sticker, as prices continue to trend downward relative to sticker price. A year ago, in January 2022, the average ATP was more than $900 above the average MSRP.

Sales volumes in January were up year over year by more than 6% but down from December, thanks in part to improved supply and added fleet sales. Elevated retail prices and high loan rates are putting downward pressure on retail sales.

“The transaction data from January indicates that overall prices are no longer increasing like they were a year ago,” said  Rebecca Rydzewski, research manager of economic and industry insights for Cox Automotive. “Both luxury and non-luxury prices were down month over month, but the mix of luxury vehicle sales last month—at a record high near 20%—helped keep the

luxury and higher-end models. Average Prices for

Non-Luxury

Cars Decline from the Record High in December

The average price paid for a new non-luxury vehicle in January was $45,344—a decline of $271 compared to December. The majority of non-luxury brands— including Chevrolet, Chrysler, Dodge, Ford, Honda, Kia, Mazda and Subaru—all saw ATP declines between 0.3% to 4.9% month over month in January. This correlates with higher incentives helping to push prices down.

Toyota and Ram showed the most price strength in the non-luxury market, transacting between 2% and 5% over sticker price in January.

Luxury Share Hits Record High, While Average Prices Fall in January.

Strong luxury vehicle sales have been a primary reason for overall elevated new-vehicle prices. This remained the case in January when luxury vehicle share jumped to a record 19.6% of total sales, up from 18.6% in December. The high share of luxury sales helps to push the overall industry ATP higher, even

The average price paid for a new EV decreased in January by $3,363 (down 5.4%) compared to December. The average new EV sold for $58,725, according to Kelley

Blue Book estimates, and is still well above the industry average.

The drop in pricing was driven by significant price cuts from Tesla, which commands roughly two-thirds of the EV market. Tesla’s average transaction prices decreased $5,440, down 8.4% month over month and down 5.5% year over year.

Lower prices likely helped Tesla deliver higher sales volumes. According to Kelley Blue Book estimates, Tesla sales in January increased year over year by more than 30%.

Auto Incentives Offered by Manufacturers Remain at Historically Low Level but Are Increasing

Incentives increased in January 2023 to 2.8% of the average transaction price, compared to 2.7% in December. In January 2021, before the new-vehicle inventory decline, incentives averaged 8.6% of ATP, according to Kelley Blue Book estimates.

Luxury cars had the highest incentives in January at 6.2% of ATP. Meanwhile, vans and minivans had the lowest incentives, with less than 1% of ATP.

Source: Kelley Blue Book

DOWNEY NISSAN Downey

562-334-1188

(562) 334-1195 Fax

M-F 7-5 wholesaleparts@downeynissan com

NISSAN OF BAKERSFIELD Bakersfield

888-402-6915

(661) 835-0389 Fax

M-F 7-6, Sat. 8-5 www�nissanofbakersfield�com

NISSAN OF VAN NUYS

Van Nuys

818-374-4421

(818) 787-8400

(818) 908-9520 Fax

M-F 7-6:30, Sat. 7-6 wholesaleparts@vannuysnissan�com www nissanofvannuysparts com

TEMECULA NISSAN

Temecula

951-972-8430

(951) 972-8396 Fax

M-F 7-6, Sat. 7-6, Sun. 8-5

wholesaleparts@temeculanissan com

INFINITI

INFINITI OF VAN NUYS

Van Nuys

818-374-4493

(818) 787-8400

(818) 809-2727 Fax

M-Sat. 8-5

wholesaleparts@vannuysinfiniti com

www infinitiofvannuys com

GOLDEN STATE NISSAN

Colma

650-488-2873

(650) 944-0305 Fax

M-F 7-6

parts@goldenstatenissan com

FUTURE NISSAN

Roseville

916-677-5251

(916) 786-0743 Fax

M-Sat. 7:30-6

wholesale@futurenissan com

Parts FutureNissan com

GOLDEN STATE INFINITI

Colma

650-488-2877

M-F 7-6

parts@goldenstatenissan com

LITHIA NISSAN OF FRESNO

Fresno

800-870-7779

(559) 436-6040

(559) 436-0743 Fax

M-F 7-6, Sat. 8-4 etaylor@lithia com

Genuine NISSAN & INFINITI OEM Wholesale Parts are Superbly Crafted to Strict Quality Standards. THE FOLLOWING DEALERS PROUDLY STOCK GENUINE PARTS FOR YOUR NISSAN OR INFINITI REPAIRS. THE FOLLOWING DEALERS PROUDLY STOCK GENUINE PARTS FOR YOUR NISSAN OR INFINITI REPAIRS.

S. CALIFORNIA

N. CALIFORNIA

NISSAN

S. CALIFORNIA

N. CALIFORNIA

Average Length of Rental Still Increasing, But At Slower Pace

Enterprise on Jan. 31 reported the average Length of Rental (LOR) in the fourth quarter of 2022 was 18.7 days, a one-half day increase over the quarter before it—a typical annual pattern, brought about by winter weather, animal accidents and holiday travel.

When compared to the same quarter the year before it, LOR was up 1.7 days in Q4 2022. That is an increase, but not as high as Q3 2022’s results, which showed a three-day increase year over year, and less than the 3.9-day increase observed in Q4 2021 compared to Q4 2020. Louisiana recorded the highest overall LOR of any state at 22.3 days, a one-day increase over its Q4 2021 results, followed by Oklahoma (21.4), Rhode Island (21.1), and Georgia (21.0). Ten additional states saw LOR above 20 days. The lowest LOR in the country was Hawaii at 13.7 days, still an increase of 0.8 over Q4 2021. Alaska (20.3) saw the highest year-over-year increase—4.5 days. Colorado, Montana, South Dakota and Washington also saw increases of three days or more.

Every state saw an increase year over year, but New Jersey, Vermont, Wyoming, Hawaii, California and New York were less than one full day. Parts issues, technician staffing and more complex repairs continue to be referenced by industry experts as factors in longer repair times.

“The overall trends in LOR match up with what we saw happen with the backlog of work that repairers reported in our Q4 survey,” said John Yoswick, editor of the weekly CRASH Network newsletter. “While the national average backlog remained at 4.8 weeks, unchanged from the record high in Q3, there was another jump in the percentage of shops with the largest backlogs. A record 25% of shops were reporting eight weeks or more of work scheduled. For comparison, in prepandemic Q4 2019, just 6.4% of shops had backlogs of even just four weeks or more, and the national average was under two weeks.

“Some of the state changes in LOR sync up with what we saw in terms of shops’ backlog of work in Q4,” Yoswick continued. “Colorado, Montana, South Dakota and Washington, where Q4 LOR was up by three days or more, are all in regions where we saw Q4 backlogs increase by a halfweek or more. These regions were also among those with the highest average Q4 backlog—5.5 weeks or more—compared to the three Sunbelt regions where average backlogs were between 3.5 and 4.9 weeks.”

Greg Horn, PartsTrader’s chief innovation officer, who oversees the data analytics department, also commented on Q4 data trends.

“At PartsTrader, we processed close to $2 billion in parts transactions in 2022 and track delivery days quoted in our platform,” Horn said. “We measure parts delivery days by measuring the median plus two standard deviations to capture the parts that are driving collision repair delays. While delays in parts is only one factor in longer repair

by Louisiana (18.9), Georgia (18.7), Oklahoma (18.7), Tennessee (18.2) and Oregon (18.1).

The highest year-over-year increase was in Alaska, where LOR jumped 5.1 days higher than Q4 2021—almost two times greater than the next highest year-over-year increase seen in Washington (+2.8).

The lowest drivable LOR was North Dakota at 11.3 days, followed by Hawaii (11.8), Vermont (12.6), Iowa (12.7) and DC (12.9). Wyoming saw only a 0.2-day increase; California, Louisiana, Michigan, Vermont and Washington, D.C., all had increases under one day.

Non-Drivable

For rentals associated with nondrivable claims, LOR was 27.1 days in Q4 2022, a 2.8-day increase from Q4 2021 (24.3), but almost static compared to Q3 2022 (up 0.1 day).

Louisiana had the highest nondrivable LOR at 33.2 days, a 3.7-day increase from Q4 2021. An additional nine states all had non-drivable LOR higher than 30 days, followed by eight more states with LOR above 29 days.

South Dakota (30.6) saw the highest increase, with LOR jumping eight days higher than Q4 2021 (22.6). Alaska, Colorado, Maine, Montana and Washington saw non-drive increases greater than five days.

On the other end, Iowa and New York had the lowest non-drivable LOR at 23.0 days each, followed by Washington, D.C., at 23.4. California, Hawaii, Massachusetts, New Jersey and Virginia had LORs under 25 days.

Hawaii recorded the only decrease

times, it is a major one.

“Our data shows that Q4 2022 median delivery days for parts were up by 0.4 days over Q3 2022, which tracks with Enterprise’s LOR reporting,” Horn continued. “Similarly, when we compared the Q4 2022 delivery days for parts to Q4 2021, we measured a nearly identical increase of 1.5 days. This would indicate a strong correlation between parts fulfillment and length of rental increases.”

Ryan Mandell, director of claims performance for Mitchell International, shared some relevant data.

“The average vehicle age in Q4 2022 was older than in Q4 2021---7.34 years old compared to 7.01 years old. Average severity is already nearing Q4 2021 numbers at $4,015, compared to $4,068, with approximately 40% of supplements still outstanding,” Mandell said. “Average total labor cost has already eclipsed the Q4 2021 number, increasing from $1,586 to $1,593. Again, important to keep in mind that as supplements are taken into account, the Q4 2022 number will continue to rise.”

Drivable

LOR associated with drivable claims was 16.2 days in Q4 2022, also a 1.7 day increase from Q4 2021, and only 0.6 days higher than Q3 2022.

Rhode Island recorded the highest drivable LOR at 19.3 days, followed

from the previous year’s quarter with results down 0.7 days.

Yoswick offered additional insights into the repair backlog.

“Parts issues, workforce challenges and more harder-hit vehicles are also showing up in another increase in late 2022 in how many jobs shops say they have in process relative to their typical workload,” he said. “The 300+ shops responding to a CRASH Network survey in December had an average car count of 79 jobs per month and reported currently having 61 jobs in process, or the equivalent of 77% of their typical monthly volume. That level of work-in-progress (WIP) is up from 64% three months earlier.

“It may not be surprising to see WIP rising even further in the fourth quarter, typically the busiest in many regions of the country, but most shops are still citing a lack of technicians and parts delays as the chief causes for the backlog of work,” added Yoswick. “Some shops also noted a higher than usual number of non-drivable repairs gumming up the works.”

“Non-drives are preventing regular scheduling, delaying repairs,” said the manager of a smaller independent shop in Pennsylvania responding to CRASH Network’s survey. “The last three out were each between $9,000 and $20,000 in damage.”

Regarding increases in non-drivable

repairs, Mandell added: “Air bag deployments have reached the highest number ever recorded at 1.26%, up from 1.11% in Q4 2021.”

Total Loss

LOR with totals was 18.2 days, a comparatively modest increase of 0.6 days from Q4 2021, and up 0.4 days from Q3 2022.

Hawaii, which saw some good results in other channels, had the highest total loss LOR at 24.6 days, an increase of 4.3 days—also the highest. The next highest were Oregon (21.4) and North Carolina (21.0). Minnesota saw a large increase as well, jumping 3.4 days, followed by Ohio with a 3.0-day increase. On the other end, North Dakota saw a LOR of 14.9 days, followed by Vermont and Wisconsin at 15.9 days each. Seven additional states saw total loss LOR below 17 days.

Twelve states, plus Washington, D.C., had decreases in total loss LOR compared to Q4 2021, led by Vermont (-2.4), Delaware (-1.4) and Rhode Island (-1.0). “Total Loss frequency rose sharply in Q4 2022 to 18.2%---up from 17.9% in Q4 2021 and 16% in Q3 2022,” Mandell said. “A portion of this increase can be attributed to Hurricane Ian, which resulted in Total Loss frequency in Florida in Q4 2022 reaching 27.2%, up from 16.4% in Q4 2021 and 15.9% in Q3 2022.”

Summary

While Q4 2022 continued with the return of historical trending, the results themselves continue to be exacerbated by supply chain disruptions, parts delays, collision repair backlogs, and technician shortages.

With the complexity of vehicle repairs only increasing, for both internal combustion engine (ICE) and battery electric vehicles (BEV) models, the entire industry must play a part in ensuring all collision-related businesses are aligned---not just for procedural solutions, but to ensure our mutual customers receive safe and proper repairs, an excellent experience and peace of mind.

Enterprise is committed to partnering with insurers, repairers, and suppliers on each one of these issues. Through foundational support provided by the Enterprise Holdings Foundation, Enterprise is spearheading the Collision Engineering Program, designed to attract and develop entry-level talent to fill essential roles within the collision repair industry. Enterprise is thrilled to expand its longtime partnership with Ford Motor Company, through its philanthropic arm, the Ford Fund, to expand the program and help address this ongoing industry challenge.

For more information, visit www. beacollisionengineer.com.

Source: Enterprise

Employers Should Look For ASE Entry-Level Certs

Businesses looking to hire entrylevel vehicle service employees should ask if potential hires have earned ASE Entry-Level certification. By earning this first-step certification, prospective employees are indicating to employers they have a substantial level of practical, knowledge-based readiness for the workforce.

ASE Entry-Level certification tests are available for the automobile, collision repair/ refinish and medium/heavy duty truck segments. ASE Entry-level certification is the first step in building career credentials as a service professional. The tests are intended for students in career and technical programs and are a predictable gauge for future success with ASE professional-level certifications. For more information about ASE Entry-Level certifications, visit www.ase.com/entry-level.

Source: ASE

www.autobodynews.com

Dirito Bros. Walnut Creek Volkswagen Walnut Creek

925-934-8459

Fax: 925-934-0786 parts@dirito.co

Niello Volkswagen Sacramento 916-482-5790

Fax: 916-481-9579

Mon-Sat 8am-5pm vw.parts@niello.com

WASHINGTON University Volkswagen Seattle

206-634-8200

Fax: 206-547-1581

M-F 7am-6pm parts@uvwaudi.com www.universityvw.com

CALIFORNIA

Porsche Burlingame Burlingame, CA 888.737.5738

650.348.0883

650.348.0837 Fax parts@rectormotors.com

Porsche Long Beach Long Beach, CA 562-494-1911

562-343-5385 Fax ndavis@porschelb.com

IDAHO Porsche of Boise Boise, ID 800-621-1775

208-672-3494 Fax partspc@lylepearson.com

©2023 Porsche Cars North America, Inc. Porsche recommends seatbelt usage and observance of traffic laws at all times.

Porsche Genuine Parts and Service, only at your local authorized Porsche dealer.

Driven

Brands Promotes New COO

Driven Brands Holdings Inc. on Jan. 26 announced the appointment of Danny Rivera to the newly-created role of chief operating officer, effective Feb. 20, reporting to CEO Jonathan Fitzpatrick

Driven Brands is also pleased to welcome back Mo Khalid, who will succeed Rivera in the role of executive vice president and group president of maintenance, leading both Take 5 Quick Lube and Meineke.

Rivera has more than 20 years of experience in the consumer and retail category, most recently serving as EVP and group president, maintenance, and earlier in a number of executive positions, including serving as the company’s chief information officer and president of Meineke.

Prior to joining Driven Brands in 2012, he served in a variety of leadership roles at AutoNation, Burger King, General Electric and Motorola.

Rivera holds two degrees from Florida International University—a bachelor’s degree in computer engineering and a Juris Doctorate.

Source: Driven Brands

Toyota CEO Steps Down, Opening Up Possibility of New EV Strategy

By William Johnson Teslarati

Akio Toyoda, long-time Toyota CEO and grandson of the company’s founder, announced he will leave his position later this year. Lexus head Koji Sato will replace him.

the Year by AutoCar, following the Japanese brand’s rise to dominance in the early 20-teens. Now, as he departs, the company may again have the opportunity to turn a new leaf and head in a new direction.

The announcement is surrounded by significant fanfare but very few details. Many executives celebrated Toyoda’s dedication to his work and wished him the best as he plans to depart in April, but the brand’s future remains cloudy.

Sato has already hinted at a change in direction. While clearly interested in hydrogen engine and fuel cell technology, Sato has also guided Lexus through the development of its first EV, based on Toyota’s recently relaunched BZ4X.

Another indication of Sato’s potentially different strategy moving forward is his age. At 53, Sato is a spring chick compared to his fellow executives, suggesting he may be here to stay. However, the same was said of Toyoda, now departing at only 66.

Toyoda is known not only for his relation to the founder of the largest automotive company in the world, but also for taking the helm as CEO at Toyota after the market collapse of 2008 and guiding the company to where it is today. In 2012, Toyoda was named Man of

Pump Prices Ease As Oil Market Digests Economic

News

By Andrew Gross AAA

The national average for a gallon of gas barely budged over the past week, drifting lower by three cents to $3.47 as of Feb. 6.

The previous week’s decision by OPEC+ to maintain current production levels and not make any cuts led to lower oil prices.

But the blockbuster U.S. report Feb. 3 of 517,000 jobs added in January, dropping the unemployment rate to a 54year low of 3.4%, may have the opposite effect. Are recession fears fading, and could a healthier global economy lead to more demand for oil and higher prices?

“Keep an eye on the price of oil,” said Andrew Gross, AAA spokesperson, “because oil currently accounts for nearly 60% of what we pay at the pump. And rising or falling oil prices can have a direct impact on motorists’ wallets.”

According to data from the Energy Information Administration (EIA), gas demand

rose from 8.14 million to 8.49 million b/d over the week before Feb. 6. Meanwhile, total domestic gasoline stocks increased by 2.6 million bbl to 234.6 million bbl. Despite rising gas demand, total supply growth has helped limit pump price increases.

The Feb. 6 national average of $3.47 is 18 cents more than a month ago and four cents more than a year ago.

The nation’s top 10 largest weekly decreases: Delaware (-15 cents), Ohio (-12 cents), Maryland (-9 cents), South Carolina (-9 cents), Tennessee (-9 cents), Alabama (-8 cents), Michigan (-8 cents), Indiana (-8 cents), Florida (-8 cents) and Virginia (-7 cents).

The nation’s top 10 least expensive markets: Texas ($3.08), Mississippi ($3.12), Oklahoma ($3.13), Missouri ($3.13), Kentucky ($3.14), Arkansas ($3.14), South Carolina ($3.17), Kansas ($3.18), Louisiana ($3.19) and Tennessee ($3.19).

Source: AAA

Toyoda’s goals within the auto industry were clear. First, due to his passion for driving and motorsports, he pushed the conservative Japanese brand to reignite its performance offerings. Second, Toyoda was known for his slower approach to electrification, instead opting to sell alternative vehicles before rolling out more serious EV offerings.

The road ahead of Toyota is a difficult one. As more and more consumers move to electric offerings, the clock is certainly ticking for Toyota’s upcoming CEO. The potential change in strategy and leadership could be good for the company, perhaps resulting in a faster EV transition than many would expect.

“I believe that over the past 13 years, I have built a solid foundation for passing the baton forward,” Toyoda said.

Caption: Akio Toyoda.

INSIST ON GM GENUINE PARTS

No. California

American Chevrolet MODESTO

209-491-7810

209-575-2564 Fax

M-F 7:30 am - 5:30 pm Sat 9 am - 2 pm gmparts@americanchevrolet.com www.americanchevrolet.com

Blackstone Chevrolet Wholesale Parts FRESNO

559-438-5875

559-438-4345 Fax

M-F 7:30am – 5:30pm Sat 8am – 4:30pm bharman@blackstonegm.com

Chase Chevrolet STOCKTON

209-475-6620

209-475-6708 Fax

M-F 7am - 5pm Sat 7:30am-4:30pm cesar@chasechevrolet.com

Dublin Chevrolet Cadillac Buick GMC DUBLIN

925-828-8251

925-829-2941 Fax

M-F 7am - 6pm Sat 8am - 4:30pm

FH Dailey GM Parts Center SAN LEANDRO

800-4A-GMPART

510-351-0534

M-F 8 am - 5 pm Sat 8 am - 4 pm parts@fhdailey.com www.fhdailey.com

Michael Stead Cadillac WALNUT CREEK

925-934-5022

925-934-0336 Fax

M-F 8 am - 5 pm

Sat 8 am - 3 pm steadparts@gmail.com

Courtesy Chevrolet SAN DIEGO

800-336-1404

619-297-4023 Fax

M-F 7am - 6pm Sat 8am - 5pm www.courtesysandiego.com

Paradise Chevrolet VENTURA

888-5-CHEVY-5

(888-524-3895)

805-642-0134

805-644-7214 Fax

M-F 7:30am - 6pm Sat 8am - 3pm

Rydell Automotive Group SAN FERNANDO VALLEY

818-832-1660

818-832-1692 Fax

M-F 6am - 7pm Sat 8am - 5pm nrparts@rydells.com

Thorson Motor Center PASADENA

626-793-0454

626-795-6872 Fax

M-F 7:30am - 6pm Sat 8:30am - 2pm parts@thorsonmotorcenter.com

Denny Menholt Chevrolet BILLINGS

406-896-3111

406-896-3924 Fax

M-F 7 am - 6 pm tsoltis@dennymenholt.com

Corwin Buick GMC RENO

775-333-8777

775-322-1837 Fax

M-F 8am - 5:30pm ahardie@corwinauto.com www.corwinbuickgmc.com

Michael Hohl Motor Company CARSON CITY

775-884-8619

775-884-8645 Fax

M-F 7 am - 6 pm Sat 8 am - 5 pm gmparts@michaelhohl.com

No. California

So. California

Nevada Montana

Publisher

Jeremy Hayhurst

General Manager

Barbara Davies

Editor

Abby Andrews

Contributing Writers

Mike Anderson, Ed Attanasio, Stacey Phillips, Cole Strandberg, John Yoswick

Advertising Sales

Joe Momber, Norman Morano

Office Manager

Louise Tedesco

Digital Marketing Manager

Bryan Malinski

Art Director

Rodolfo Garcia

Senior Designer

Vicki Sitarz

Accounting & HR Manager

Heather Priddy

Permissions Editor

Randi Scholtes

Office Assistant

Dianne Pray

Serving Alaska, California, Hawaii, Idaho, Montana, Nevada, Oregon, Washington and Wyoming. Autobody News is a monthly publication for the autobody industry. Permission to reproduce in any form the material published in Autobody News must be obtained in writing from the publisher.

©2023 Adamantine Media LLC.

Autobody News P.O. Box 1516 Carlsbad, CA 92018 (800) 699-8251 (760) 603-3229 Fax www.autobodynews.com editor@autobodynews.com

Shoichiro Toyoda, Former President of Toyota, Dead At 97

By Steven Symes Motorious

Shoichiro Toyoda, son of the founder of Toyota and credited with pushing the automaker into international markets, has died at the age of 97. Reports indicate he passed away Feb. 14 due to heart failure.

Made honorary chairman in his later years, he was largely responsible for the company’s aggressive push into North America, including manufacturing vehicles on this continent.

Born Feb. 27, 1925, in Nagoya City, Toyoda was able to experience the height of Imperial Japan, its demise and the rebuilding of the country with foreign help. It wasn’t until 1982 that he became president of his father’s company, using his vision of Toyota becoming an international force to push into markets around the globe. He served as president of Toyota until 1992.

Rapidly, the Toyota name came to become respected as it stood for reliability, durability and all-around quality with legendary

models like the Hilux pickup and Land Cruiser. Countless books and articles have been written about the automaker’s engineering and manufacturing methods developed in part under Toyoda’s watch, with many competitors trying to incorporate elements of them into their own operations.

Also under Toyoda’s direction Lexus was formed, forever altering the luxury car market in North America. Today it is often ranked as one of the most desirable and reliable luxury brands.

In 2007, Shoichiro Toyoda was inducted into the U.S. Automotive Hall of Fame. Such a move was unthinkable when he became president of the company, enduring a smear campaign in the 1980s that accused Toyota and other Japanese manufacturers of stealing manufacturing jobs from American workers. However, Toyota manufacturing in the U.S. surged 49% from 1981 to 1990.

A private funeral for Toyoda’s family will be held.

BendPak Lifting Systems Service Any EV

BendPak has improved, expanded and branded its EV battery scissor lift table lineup to make servicing both electric and internal combustion vehicles more efficient than ever. The new MobiEVSTM EV battery and powertrain lifting system family includes an upgraded model EV2400SL and new, higher-capacity model EV4000SL.

Mobi-EVS full-rise, battery-powered, mobile scissor lift tables have a patentpending design that makes them perfectly suited for removing and installing high-voltage battery packs or internal combustion powertrain components. With a press of the button on the pendant controller, the 40-inch by 60-inch lift platform rises more than 6 feet in less than 20 seconds. Multiple recessed anchoring locations accommodate a variety of modular fixtures, adapters and accessories for maximum versatility.

The new Mobi-EVS model EV4000SL delivers rated load capacity of 4,000 pounds—enough to safely support the high-voltage battery packs of most EVs on the road, as well as traditional powertrain components. The EV2400SL retains its 2,400 pounds capacity.

Source: BendPak

Rivian Celebrates Production Milestones But Will Cut 6%

of Workforce As Price War Looms

By Mark Kane, Joey Klender InsideEVs, Teslarati

There is no doubt 2022 was a challenging but fruitful year for Rivian, which, according to a video posted to YouTube, produced 25,051 electric vehicles, 20,332 of which were delivered to customers.

The company’s manufacturing plant in Normal, IL, runs two shifts and achieved a record 200 vehicles produced in a single day, which would equal roughly 70,000+ vehicles annually. The next step is the addition of a night shift to further increase the production of the R1T pickup, R1S SUV and EDV van.

However, Rivian will reportedly layoff 6% of its workforce, according to an internal memo seen by Reuters, following pressure from EV rivals, which have cut prices significantly already in 2023, putting pressure on EV makers attempting to reach profitability.

The cuts are expected to affect 840 employees, but none related

to manufacturing operations at the plant in Normal.

“We must focus our resources on ramp and our path to profitability,” CEO RJ Scaringe said in the memo, before apologizing to the affected employees.

the best risk-adjusted returns on our capital investments.”

“At this point in time, we believe focusing on our consumer business, as well as our existing commercial business, represent the most attractive near-term opportunities to maximize value for Rivian,” Scaringe said at the time.

Rivian had lost $18 billion in cash and cash equivalents at the end of Q3 2022 compared to the same quarter a year earlier.

Rivian has made several strategy moves over the past six months to conserve cash and work toward profitability within its operations. Just three months after signing a Memorandum of Understanding with Mercedes-Benz to develop electric vans, Rivian scrapped the deal as it needed to “evaluate growth opportunities” and “pursue

Rivian is also implementing improvements based on what it learned from initial production, as well as in response to some parts supply constraints. The increased production volume should help reduce the order backlog—which in the case of R1T/R1S pre-orders exceeds 100,000—and bring the company a step closer to financial profitability.

Volvo Group North America Recall

By David A. Wood CarComplaints.com

Volvo Group North America has agreed to pay $130 million to the National Highway Traffic Safety Administration for alleged failures regarding vehicle recalls.

In a consent order with NHTSA, Volvo agreed to pay the civil penalty of $130 million in what the government called “one of the largest-ever penalties for violations of the Vehicle Safety Act.”

The order follows a NHTSA investigation that allegedly found Volvo failed to properly report death and injury incidents, and failed to recall vehicles in a timely fashion.

Safety regulators also allege Volvo failed to properly notify owners about safety recalls.

NHTSA said in addition to the large penalty, an independent third-party auditor will keep watch over Volvo as the automaker meets regularly with

NHTSA about potential vehicle safety problems. The auditor’s job will also require Volvo be monitored for possible Safety Act regulations violations.

As part of the consent order, employees will receive appropriate training about complying with federal safety regulations.

“The consent order requires the company to make an upfront payment of $65 million and spend an additional $20 million on the specific performance obligation to create a safety data analytics infrastructure, and includes an additional $45 million deferred penalty that may become payable under specified circumstances,” NHTSA said.

The consent order is scheduled to have a three-year term unless NHTSA determines possible problems that could extend the order to five years.

Credit: Rivian/Twitter

MINIMIZE LOSS

Material Usage Rate

Labor

Waste Theft Warranty

Re-work Indifference

Our team and systems work to minimize each

MATERIALS

Hundreds of supplier relationships

TOOLS TECHNIQUE SPEED / QUALITY

OPTIMIZED LABOR / IMPROVED CYCLE TIMES

Careful inspection, monitoring, measurement and reporting

Industrial Finishes has experts on staff

Industrial Finishes provides training, education & SOPs