Fuel and Energy systems
Filters and Fuel Accessories
FUEL FILTERS Keeping your fuel clean really is an important issue where boating is concerned. Contaminated fuel affects performance and can increase the wear and tear on your engine. The trouble is that countless small dirt particles are already in the fuel before it gets anywhere near your boat - and that’s where Yamaha Water Separating Fuel Filters come in. They are designed to be the most efficient systems available for removing dirt before it can enter the pumps and injection system. Without one of these, dirty, unfiltered fuel could block the internal fuel passages, causing the engine to run poorly - or even to fail. Instead of the standard 35/27-micron filter, the Yamaha 10-micron filter will protect your engine by removing dirt, water and small foreign particles. These superior 10-micron filters are strongly recommended for all engines, especially HPDI and EFI models. However, it’s important to choose a fuel filter with the right capacity for your engine and to regularly maintain it, to avoid reduced performance and engine damage. A simple rule of thumb is to ensure that the litres-per-hour (LPH) of the filter is greater than that of the engine. This figure can be found in your owner’s manual. Remember, a filter that is too big or too good cannot cause problems, but one that is too small or dirty can restrict fuel flow, possibly resulting in engine failure.
WHAT MAKES THIS FILTER UNIQUE: This is the only filter on the market that is fully homologated. This is due to the metal bowl structure on the bottom of the filter. Making it fully fire proof gaining a Ce, ISO 10088 and ABYC standard. This means it can be used anywhere in the world. In addition the thread on top of the filter towards the mount is unique. This means that it can be only replaced with a YAMAHA genuine replacement filter. These are 10 micron filters that will protect the engine from foreign particles. 10micron filters are far superior then standard offered marine filters The flowrate is indicated on the filter itself and in the part number: So YMEEFWS00180A is 180Liters/H YmeEFWS00360 is 360L/H and 620L/H flowrate wise. It is also printed on the filter itself. Following this logic: Up to 115HP engines the 180 filter can be used. From 115 to XTO the 360 can be used. We recommend the 620 for heavy usage of the 300HP+ range
142 – Dealer Rigging Guide
Part number YMEFWS00180A YMEFWS00180E YMEFWS00360A YMEFWS00360E YMEFWS00620A YMEFWS00620E YMEFWS00SSPT YMEFWSEFT06D YMEFWSEFT08D YMEFWSEFT10D YMEFWSSFT06D YMEFWSSFT08D YMEFWSSFT10D
Part description OB - FUEL WATER SEP S ASSY OB - FUEL WATER SEP S ELEMENT OB - FUEL WATER SEP M ASSY OB - FUEL WATER SEP M ELEMENT OB - FUEL WATER SEP L ASSY OB - FUEL WATER SEP L ELEMENT OB - FUEL WATER SEP SS PLATE OB - ELBOW FITTING 06 MM OB - ELBOW FITTING 08 MM OB - ELBOW FITTING 10 MM OB - STRAIGHT FITTING 06 MM OB - STRAIGHT FITTING 08 MM OB - STRAIGHT FITTING 10 MM
