FCL IN-LINE SUCTION FILTRES WITH PAPER CARTRIDGE These small in-line filtres retain impurities and very fine dust, interfering with the capacity in a negligible manner. Thanks to their reduced size, they can be directly installed onto vacuum piping, close to the services (vacuum cups, vacuum clamping systems etc.) for a fractionated filtration and a better visual control of all the plant suction points. They are composed of a cylindrical transparent plexiglas body closed by two anodised aluminium flanges kept in place by seeger rings, where all the threaded male or female connections and seals are located. Inside there is a filtering cartridge with a filtering degree equal to 7 µ, which is made with a special treated paper that is pleated to increase the filtering surface. The filtres can be inspected by simply removing one of the flanges. Due to the paper filtering element, these filtres are not recommended in presence of water or oil vapours or condensations. Technical features Working pressure: from 0.5 to 3000 mbar abs. Fluid temperature: from -20 to +60 °C Filtering degree: 7 µ
5
Filtering cartridge
FCL 1 FCL 2 FCL 3
d
A
B
C
D
Max capacity
Ø G1/4” G3/8” G1/2”
79.2 83.6 89.6
Ø 20.0 24.0 26.5
17 20 24
7.1 9.3 12.3
cum/h 7.5 20 25
B
C
D
E
Max capacity
Ø 20.0 24.0 26.5
17 20 24
19.1 19.1 24.3
12 12 15
cum/h 7.5 20 25
Spare cartridge art. 00 FCL 03 00 FCL 03 00 FCL 03
Spare sealing kit art. 00 KIT FCL 1 00 KIT FCL 1 00 KIT FCL 1
Weight
Spare sealing kit art. 00 KIT FCL 1 00 KIT FCL 1 00 KIT FCL 1
Weight
g 120 136 152
Filtering cartridge
Art.
d
FCL 1 M FCL 2 M FCL 3 M
Ø G1/4” G3/8” G1/2”
A
103.2 103.2 113.6
Conversion ratio: inch = mm ; pounds = g = Kg 453.6 0.4536 25.4
Spare cartridge art. 00 FCL 03 00 FCL 03 00 FCL 03
g 122 138 154
3D drawings available at www.vuototecnica.net
Art.
5.01
GAS-NPT thread adapters available at page 1.117
5
FCL IN-LINE SUCTION FILTRES WITH PAPER CARTRIDGE
Filtering cartridge
Art.
d
A
B
C
D
E
F
Max capacity
FCL 1 MF FCL 2 MF FCL 3 MF
Ø G1/4” G3/8” G1/2”
91.2 93.4 101.6
Ø 20.0 24.0 26.5
17 20 24
19.1 19.1 24.3
12 12 15
7.1 9.3 12.3
cum/h 7.5 20 25
Spare cartridge art. 00 FCL 03 00 FCL 03 00 FCL 03
Spare sealing kit art. 00 KIT FCL 1 00 KIT FCL 1 00 KIT FCL 1
Weight g 120 136 152
PAPER FILTERING CARTRIDGES FOR FCL FILTRES
3D drawings available at www.vuototecnica.net
The cartridges described below are suited for FCL filtres. They are made with a special treated paper with a filtering degree equal to 7 µ, which is pleated in order to increase its surface and wrapped on two flanges in plastic material. They are recommended for retaining impurities and fine dust, but not in presence of water or oil vapours or condensations.
Art. 00 FCL 03
5.02
Filtre art. FCL 1 - FCL 2 - FCL 3 FCL 1 M - FCL 2 M - FCL 3 M FCL 1 MF - FCL 2 MF - FCL 3 MF
D Ø 31
D1 Ø 10
g Conversion ratio: inch = mm ; pounds = = Kg 453.6 0.4536 25.4
H 47
Filtering degree micron 5÷7
GAS-NPT thread adapters available at page 1.117
5
FB SUCTION FILTRES WITH METAL CARTRIDGE Preventing impurities from reaching the vacuum pump is fundamental to guarantee the correct operation and long duration. This range of filtres, to be placed on the vacuum pump suction inlet or on the plant pipeline, has been designed for this purpose. Their simple and rational structure features threaded connections for the installation and a lid, very easy to open, to allow easily cleaning the filtering cartridge. The lids are made with die-cast aluminium, as are the containers, except for the models FB 5, FB 10 e FB 20 which are in transparent plastic material (cellulose acetate), particularly resistant to shocks. The standard filtering cartridges are in profiled stainless steel mesh, with a filtering degree equal to 44 µ. Upon request, they can be supplied with a filtering degree equal to 100 or 300 µ. The capacity of these filtres ranges from 5 to 300 cum/h. Technical features Working pressure: from 0.5 to 3000 mbar abs. Fluid temperature: from -20 to +90 °C for filtres with aluminium container from -20 to +50 °C for filtres with containers in transparent plastic material Filtering degree: 44 µ
5
2 holes ø 5x11
Art.
FB 5
d
A
B
C
D
Max capacity
Ø G1/4”
61
74.5
12.5
Ø 59
cum/h 5
Conversion ratio: inch = mm ; pounds = g = Kg 25.4 453.6 0.4536
Spare cartridge art. 00 FB 03
Spare sealing kit art. 00 KIT FB5
Weight g 140
3D drawings available at www.vuototecnica.net
Filtering cartridge
5.03
GAS-NPT thread adapters available at page 1.117
5
FB SUCTION FILTRES WITH METAL CARTRIDGE
Screw TEM6
Screw TEM6
3D drawings available at www.vuototecnica.net
Filtering cartridge
Art.
FB 10 5.04
d
A
B
C
D
Max capacity
Ø G3/8”
81
87
17
Ø 79
cum/h 10
g Conversion ratio: inch = mm ; pounds = = Kg 453.6 0.4536 25.4
Spare cartridge art. 00 FB 13
Spare sealing kit art. 00 KIT FB10
Weight g 258
GAS-NPT thread adapters available at page 1.117
5
FB SUCTION FILTRES WITH METAL CARTRIDGE
Scre
Screw TEM6
Filtering cartridge
5
Art.
FB 20
d
A
B
C
D
Max capacity
Ø G1/2”
81
116
17
Ø 79
cum/h 20
Conversion ratio: inch = mm ; pounds = g = Kg 25.4 453.6 0.4536
Spare cartridge art. 00 FB 22
Sealing kit and small items art. 00 KIT FB20
Weight g 312
3D drawings available at www.vuototecnica.net
Condensation drainage
5.05
GAS-NPT thread adapters available at page 1.117
5
FB SUCTION FILTRES WITH METAL CARTRIDGE
Screw TEM6
Screw TEM6
3D drawings available at www.vuototecnica.net
Filtering cartridge
Art.
FB 20 A 5.06
d
A
B
C
D
Max capacity
Ø G1/2”
81
121
17
Ø 81
cum/h 20
g Conversion ratio: inch = mm ; pounds = = Kg 453.6 0.4536 25.4
Spare cartridge art. 00 FB 22
Sealing kit and small items art. 00 KIT FB20
Weight g 394
GAS-NPT thread adapters available at page 1.117
5
FB SUCTION FILTRES WITH METAL CARTRIDGE
Screw TEM6
5
Art.
FB 25
d
A
B
C
D
Max capacity
Ø G3/4”
96
144
31
Ø 90
cum/h 40
Conversion ratio: inch = mm ; pounds = g = Kg 453.6 0.4536 25.4
Spare cartridge art. 00 FB 22
Sealing kit and small items art. 00 KIT FB 25
Weight g 594
3D drawings available at www.vuototecnica.net
Filtering cartridge
5.07
GAS-NPT thread adapters available at page 1.117
5
FB SUCTION FILTRES WITH METAL CARTRIDGE
Screw TEM6
Filtering cartridge
3D drawings available at www.vuototecnica.net
Condensation drainage
Art.
FB 30
5.08
d
A
B
C
D
Max capacity
Ø G1”
120
181
31
Ø 112
cum/h 70
g Conversion ratio: inch = mm ; pounds = = Kg 453.6 0.4536 25.4
Spare cartridge art. 00 FB 34
Sealing kit and small items art. 00 KIT FB 30
Weight g 758
GAS-NPT thread adapters available at page 1.117
5
FB SUCTION FILTRES WITH METAL CARTRIDGE
Screw TEM12
Filtering cartridge
5
Art.
FB 40 FB 50
d
A
B
C
D
Max capacity
Ø G1” 1/4 G1” 1/2
190 190
255 255
39 39
Ø 182 182
cum/h 150 200
Conversion ratio: inch = mm ; pounds = g = Kg 25.4 453.6 0.4536
Spare cartridge art. 00 FB 45 00 FB 45
Sealing kit and small items art. 00 KIT FB 40 00 KIT FB 50
Weight Kg 3.06 2.99
3D drawings available at www.vuototecnica.net
Condensation drainage
5.09
GAS-NPT thread adapters available at page 1.117
5
FB SUCTION FILTRES WITH METAL CARTRIDGE
Screw TEM12
Filtering cartridge
3D drawings available at www.vuototecnica.net
Condensation drainage
Art.
FB 60
5.10
d
A
B
C
D
Max capacity
Ø G2”
182
260
42
Ø 182
cum/h 300
g Conversion ratio: inch = mm ; pounds = = Kg 453.6 0.4536 25.4
Spare cartridge art. 00 FB 52
Sealing kit and small items art. 00 KIT FB 60
Weight Kg 3.18
GAS-NPT thread adapters available at page 1.117
5
STAINLESS STEEL MESH FILTERING CARTRIDGES FOR FB FILTRES The cartridges described in this page are suited for FB suction filtres. The standard ones are made with profiled stainless steel mesh with a filtering degree equal to 44 µ. Upon request, the same cartridges can be supplied with a filtering degree equal to 100 or 300 µ. They are recommended for retaining impurities even in presence of water and oil vapours or condensations, but not for retaining fine and impalpable dust.
5
00 FB 03 00 FB 13 00 FB 16 00 FB 34
Art. 00 FB 45 00 FB 52
Filtre art. FB 40 - FB 50 FB 60
D Ø 35 58 58 74
D1 Ø 6 16 16 16
D Ø 95 95
D2 Ø 10.0 25.5 25.5 25.5
D1 Ø 39 49
H
Filtering degree micron 44 44 44 44
34 34 67 67
D2 Ø 49 49
H 160 160
Filtering degree micron 44 44
Note: All the cartridges can be supplied with a 100 or 300 micron filtering degree, upon request. Conversion ratio: inch = mm ; pounds = g = Kg 25.4 453.6 0.4536
3D drawings available at www.vuototecnica.net
Art.
Filtre art. FB 5 FB 10 FB 20 - FB 25 FB 30
5.11
GAS-NPT thread adapters available at page 1.117
5
FC SUCTION FILTRES WITH PAPER CARTRIDGE These filtres have been designed to allow vacuum pumps to operate even in very dusty environments. Installed onto the pump suction inlet, they are able to retain fine and impalpable dust interfering with the capacity in a negligible manner. The filtering cartridge is made with a special treated paper with a filtering degree equal to 5 ÷ 7 µ, which is pleated to increase its surface and is contained in a double perforated sheet steel enclosure. The filtering cartridge container, as well as the lid, is made with sheet steel and varnished with a special anti-oxidation paint. A seal located between the lid and the container guarantees a perfect vacuum seal between the two elements. The release clamps applied onto the container allow a quick opening of the lid for the filtering cartridge inspection or replacement. Due to their paper filtering element, these filtres are not recommended in case of water or oil vapours and condensation. Technical features Working pressure: from 0.5 to 2000 mbar abs. Fluid temperature: from -20 to +60 °C Filtering degree: 5 ÷ 7 µ
Seal
3D drawings available at www.vuototecnica.net
Filtering cartridge
Art.
FC 10 FC 20 FC 25
5.12
Seal
d
A
B
C
D
E
F
Max capacity
Ø G3/8” G1/2” G3/4”
79 93 93
70 80 80
9 13 13
Ø 72 96 96
49 67 67
37 51 51
cum/h 15 30 50
g Conversion ratio: inch = mm ; pounds = = Kg 453.6 0.4536 25.4
Spare cartridge art. 00 FC 04 00 FC 08 00 FC 08
Spare sealing kit art. 00 KIT FC 10 00 KIT FC 20 00 KIT FC 25
Weight g 352 774 734
GAS-NPT thread adapters available at page 1.117
5
FC SUCTION FILTRES WITH PAPER CARTRIDGE
5
Filtering cartridge
Art.
FC 30 FC 35 FC 38 FC 55
Seal
d
A
B
C
E
F
G
Max capacity
Ø G1” G1” 1/4 G1” 1/2 G2”
105 97 101 170
92 84 88 157
13 13 13 13
84 78 80 81
41 46 45 79
64 51 56 91
cum/h 90 100 200 300
Conversion ratio: inch = mm ; pounds = g = Kg 25.4 453.6 0.4536
Spare cartridge art. 00 FC 15 00 FC 15 00 FC 15 00 FC 33
Spare sealing kit art. 00 KIT FC 30 00 KIT FC 35 00 KIT FC 38 00 KIT FC 55
Weight Kg 1.17 1.02 0.95 1.29
3D drawings available at www.vuototecnica.net
Seal
5.13
GAS-NPT thread adapters available at page 1.117
5
FC SUCTION FILTRES WITH PAPER CARTRIDGE
3D drawings available at www.vuototecnica.net
Seal
Filtering cartridge
Art.
FC 40 FC 50
5.14
Seal
d
A
B
D
E
F
G
Max capacity
Ø G1” 1/4 G1” 1/2
161 197
125 161
Ø 162 160
102 100
77 85
84 112
cum/h 150 200
g Conversion ratio: inch = mm ; pounds = = Kg 453.6 0.4536 25.4
Spare cartridge art. 00 FC 22 00 FC 24
Spare sealing kit art. 00 KIT FC 40 00 KIT FC 50
Weight Kg 1.83 2.11
GAS-NPT thread adapters available at page 1.117
5
FC SUCTION FILTRES WITH PAPER CARTRIDGE
5
Filtering cartridge
Art.
FC 60 FC 80 FC 100
Seal
d
A
B
C
D
E
F
G
Max capacity
Ø G2” G3” G4”
258 270 336
235 246 311
23 24 25
Ø 185 185 295
115 125 166
126 126 134
132 144 202
cum/h 300 360 540
Conversion ratio: inch = mm ; pounds = g = Kg 25.4 453.6 0.4536
Spare cartridge art. 00 FC 29 00 FC 29 00 FC 34
Spare sealing kit art. 00 KIT FC 60 00 KIT FC 80 00 KIT FC 100
Weight Kg 4.62 3.45 5.56
3D drawings available at www.vuototecnica.net
Seal
5.15
GAS-NPT thread adapters available at page 1.117
5
PAPER FILTERING CARTRIDGES FOR FC FILTRES The cartridges described in this page are suited for FC suction filtres. They are made with a special treated paper, with a filtering degree equal to 5 ÷ 7 µ, which is pleated to increase its surface and contained into a double perforated sheet steel enclosure. They are recommended for retaining fine and impalpable dust, but not in presence of water and oil vapours and condensation.
Art.
3D drawings available at www.vuototecnica.net
00 FC 04 00 FC 08
Art. 00 FC 15 00 FC 22 00 FC 24 00 FC 33
5.16
Filtre art. FC 10 FC 20 - FC 25
Filtre art. FC 30 - FC 35 - FC 38 FC 40 FC 50 FC 55
D Ø 50 64
D Ø 98 126 126 98
D2 Ø 23 38
D1 Ø 60 64 64 60
H
Filtering degree micron 5÷7 5÷7
59 69
D2 Ø 60 64 64 60
H 70 125 156 140
Filtering degree micron 5÷7 5÷7 5÷7 5÷7
g Conversion ratio: inch = mm ; pounds = = Kg 25.4 453.6 0.4536
5
PAPER FILTERING CARTRIDGES FOR FC FILTRES
Art. 00 FC 29 00 FC 34
Filtre art. FC 60 - FC 80 FC 100
D Ø 152 227
D1 Ø 89 178
D2 Ø 89 178
H 215 278
Filtering degree micron 5÷7 5÷7
Conversion ratio: inch = mm ; pounds = g = Kg 453.6 0.4536 25.4
3D drawings available at www.vuototecnica.net
5
5.17
5
FO OIL-BATH SUCTION FILTRES In presence of a a considerable amount of fine or impalpable dust, the traditional suction filtre would require a cartridge with a filtering degree so high that, along with reducing its operation autonomy, it would also reduce the vacuum pump suction capacity. Oil-bath suction filters have been studied in order to overcome this problem. The main feature of these filtres is the ability to retain the smallest and most impalpable dust particles,without reducing the vacuum pump suction capacity. Oil-bath filtres are composed of a sheet steel head and container coupled with an interposed seal and clamped by release clamps. Inside, besides the oil bowl, there are two steel wool filtering cartridges, one of which is detachable and washable, while the other is fixed. The release clamps guarantee easy access for cleaning operations. They can be used with any kind of oil, even drain oil, as long as it has a minimum viscosity degree. The ideal oil is the same one used for the pump. Oil-bath suction filtres are not recommended for dry vacuum pumps. They are currently available for capacities up to 300 cum/h. Technical features Working pressure: from 0.5 to 2000 mbar abs. Fluid temperature: from -20 to +90 °C Filtering degree: ≤1 µ
Seal
3D drawings available at www.vuototecnica.net
Fixed cartridge
Mobile cartridge
Art.
FO 20 FO 30 FO 50 FO 60
5.18
Oil
d
A
B
C
D
E
F
G
H
I
Max capacity
Ø G1/2” G1” G1” 1/2 G2”
205 210 305 340
85 88 110 140
112 106 135 140
Ø 106 129 160 185
8 16 60 60
100 106 128 142
Ø 40 50 60 67
156 151 199 217
49 59 106 123
cum/h 30 90 200 300
g Conversion ratio: inch = mm ; pounds = = Kg 453.6 0.4536 25.4
Spare cartridge art. 00 FO 04 00 FO 09 00 FO 14 00 FO 19
Spare sealing kit art. 00 KIT FO 20 00 KIT FO 30 00 KIT FO 50 00 KIT FO 60
Weight Kg 1.44 1.84 2.76 3.70
GAS-NPT thread adapters available at page 1.117
5
STEEL WOOL FILTERING CARTRIDGES FOR FO FILTRES The cartridges described in this page are suited for FO oil-bath suction filtres. They are made with pressed steel wool contained in a double perforated sheet steel enclosure. Their function is to retain fine or impalpable dust impregnated with the filtre oil.
Art.
Filtre
D
D1
D2
H
00 FO 04 00 FO 09 00 FO 14 00 F0 19
art. FO 20 FO 30 FO 50 FO 60
Ø 110 134 165 190
Ø 40 49 58 66
Ø 103 127 155 180
70 72 86 104
Filtering degree (installed on the filtre) micron ≤1 ≤1 ≤1 ≤1
Conversion ratio: inch = mm ; pounds = g = Kg 453.6 0.4536 25.4
3D drawings available at www.vuototecnica.net
5
5.19
5
FO LONG OPERATION AUTONOMY OIL-BATH SUCTION FILTRES In presence of a a considerable amount of fine or impalpable dust, the traditional suction filtre would require a cartridge with a filtering degree so high that, along with reducing its operation autonomy, it would also reduce the vacuum pump suction capacity. Oil-bath suction filters have been studied in order to overcome this problem. The main feature of these filtres is the ability to retain the smallest and most impalpable dust particles,without reducing the vacuum pump suction capacity. Oil-bath filtres are composed of a sheet steel head and container coupled with an interposed seal and clamped by release clamps. Inside, besides the oil bowl, there are two steel wool filtering cartridges, one of which is detachable and washable, while the other is fixed. The release clamps guarantee easy access for cleaning operations. Two indicator lights allow monitoring the oil level and the degree of clogging. They can be used with any kind of oil, even drain oil, as long as it has a minimum viscosity degree. The ideal oil is the same one used for the pump. Oil-bath suction filtres are not recommended for dry vacuum pumps. They are currently available for capacities of 200 and 300 cum/h. Technical features Working pressure: from 0.5 to 2000 mbar abs. Fluid temperature: from -20 to +90 °C Filtering degree: ≤1 µ
Filtering cartridge
3D drawings available at www.vuototecnica.net
Seal
Art.
FO 160 FO 300
d
A
B
C
D
E
F
G
H
I
L
Max capacity
Ø G1” 1/2 G2”
Ø 250 350
100 80
508 508
Ø 290 390
308 308
32.5 32.5
Ø 12 12
910 920
356 356
140 200
cum/h 200 300
Spare seal art. 00 FO 30 00 FO 29
Weight Kg 27 40
Note: The filtering cartridges are washable and, therefore, are not to be replaced. 5.20
g Conversion ratio: inch = mm ; pounds = = Kg 453.6 0.4536 25.4
GAS-NPT thread adapters available at page 1.117
5
FS SYPHON SUCTION FILTRES These filtres retain impurities and liquids extracted through vacuum cups or vacuum clamping systems, preventing them from entering into the vacuum pumps. They are composed of: - A transparent plexiglas cylindrical container with an extractable lid to allow inspection and cleaning. - A check valve located on the suction inlet for preventing the air from returning in the filtre when the pump is idle. - A stainless steel mesh filtering cartridge with a filtering degree equal to 44 µ, also located on the suction inlet to retain dust and solid impurities. - A 2-way manual valve for service vacuum interception. - A 2-way manual valve for restoring the atmospheric pressure inside the filtre. - A radial vacuum gauge the direct reading of the vacuum level. - A magnetic level switch that stops the pump when the sucked liquid exceeds the safety level. - A rigid pipe connected to the service to convey the air flow and the sucked liquid to the bottom of the container. - A check valve at the bottom of the filtre to automatically drain the sucked liquid and impurities every time the atmospheric pressure is restored inside the filtre. - A cock applied on the aforementioned check valve for manual liquid drainage. - A sturdy metal bracket for fixing the filtre to the wall. Technical features Working pressure: from 0.5 to 2000 mbar abs. Fluid temperature: from -5 to +50 °C Filtering degree: 44 µ
5
Vacuum gauge
Seal Magnetic sensor
Art.
FS 5 FS 10 FS 20 FS 25 FS 30 FS 50
d
A
B
C
D
E
G
H
I
L
M
N
O
P
Ø G3/8” G3/8” G1/2” G3/4” G1” G2”
461 551 630 750 890 960
130 130 130 150 190 190
175 175 175 195 225 225
Ø 200 200 200 240 300 300
25 25 25 25 30 30
100 100 100 100 120 120
250 340 410 510 610 610
111 111 120 140 160 240
150 150 150 170 200 200
25 25 25 30 40 40
140 140 140 170 205 250
Ø 10 10 10 11 11 11
136 136 145 180 220 276
Conversion ratio: inch = mm ; pounds = g = Kg 453.6 0.4536 25.4
Max capacity Capacity cum/h 10 10 20 40 70 150
l 6.0 8.5 10.5 19.5 38.0 38.0
Spare Spare cartridge vacuum gauge art. art. 00 FB 13 09 05 10 00 FB 13 09 05 10 00 FB 22 09 05 10 00 FB 22 09 05 10 00 FB 34 09 05 10 00 FB 45 09 05 10
Spare seal art. 00 FS 52 00 FS 52 00 FS 52 00 FS 36 00 FS 41 00 FS 41
Weight Kg 5.5 6.0 6.8 9.1 19.2 22.7
3D drawings available at www.vuototecnica.net
Filtering cartridge
5.21
GAS-NPT thread adapters available at page 1.117
5
SYPHON FILTRE SYSTEM WITH AUTOMATIC BY-PASS FS 50 BP This system is composed of two syphon filtres. It starts working with suction through filtre 1 while filtre 2 is excluded. When the sucked liquid reaches the level switch floater via the 1” 1/2 3-way vacuum interception solenoid valves, the suction is automatically commuted to filtre 2. The inlet of atmospheric air in filtre 1, via the ½” 3-way solenoid valve installed on its lid allows automatically draining the liquid through the check valve with cock located at the bottom of the filtre. Once the liquid has been drained after a set time (this operation can be timed), the solenoid valve returns to its initial position, thus allowing the recreation of vacuum inside the filtre, through a small flexible pipe connected to the main vacuum piping. Thanks to this solution, there is no reduction of the vacuum level at the service when the suction exchange between the two filtres occurs. This exchange occurs when the liquid reaches the level switch floater in filtre 2 and from that moment on, the operations described above will be repeated. The filtre system is composed of: - 2 plexiglas syphon filtres with aluminium lids and with accessories, with a capacity of 38 litres each. - 2 1” 1/2 gas servo-controlled 3-way vacuum solenoid valves art. 07 06 11. - 2 ½” gas servo-controlled 3-way solenoid valves art. 07 03 11. - 4 1” 1/2 gas 2-way manual valves for vacuum interception art. 13 07 10. - 2 ½” gas 2-way manual valves for the inlet of atmospheric air art. 13 03 10. - 1 switchgear enclosed in a watertight metal casing for Volt 230/ 50 Hz single-phase electric voltage. - 1 frame in varnished steel profiles for the assembly of all the components described above. The syphon filtre system with automatic by-pass is recommended when there is a considerable presence of liquid in the sucked fluid and the machines cannot be stopped for draining the sucked liquid with traditional syphon filtres. Technical features Working pressure: from 0.5 to 2000 mbar abs. Fluid temperature: from -5 to +50 °C Filtering degree: 44 µ
solenoid valve
vacuum gauge
electric device
FILTRE 1 FILTRE 2
SYPHON FILTRE 2 38L
SYPHON FILTRE 1 38L
3D drawings available at www.vuototecnica.net
LIQUID DRAINAGE
solenoid valve
Art.
A
B
G
H
Max capacity
Capacity
FS 50 BP
1350
1000
G1” 1/2
1180
cum/h 200
l 38 x 2
5.22
g Conversion ratio: inch = mm ; pounds = = Kg 453.6 0.4536 25.4
Spare Cartridge art. 00 FB 45
Spare vacuum gauge art. 09 05 10
Spare seal art. 00 FS 41
GAS-NPT thread adapters available at page 1.117
5
FP SERIES FILTERING CARTRIDGE CONTAINERS WITH COMPRESSION SEALING The containers of the FP series are suited for the filtering cartridges with compression sealing and are composed of a transparent plastic container and a blue plastic head screwed together with an interposed seal. The number after the article indicates the length in inches of the filtering cartridge. The cartridge can be chosen in various materials: pleated paper, pleated polypropylene mesh and stainless steel mesh AISI 304. In the following page are described the filtering cartridges with compression sealing, with all the indications regarding dimensions, materials and filtering degree of each one of them. Technical features Working pressure: from 0.5 to 9000 mbar abs. Temperature of the sucked fluid: from -10 to 45 °C
5
Art. FP 25/4 FP 30/4 NP
d A B Ø G3/4” 130 163 G1” 143 169 Key for clamping the container
C 21 24
D Ø 130 130
E
F
49 50
50 51
Max capacity cum/h 70 100
Cartridge length 4” 4”
Cartridge art. SP/4 - SS/4 - SA/4 SP/4 - SS/4 - SA/4
Weight Kg 0.84 0.91
Note: The filtering cartridge is not part of the filtre, therefore, it must be ordered separately. Conversion ratio: inch = mm ; pounds = g = Kg 453.6 0.4536 25.4
3D drawings available at www.vuototecnica.net
4 holes ø 4.2 for fixing
5.23
GAS-NPT thread adapters available at page 1.117
5
FILTERING CARTRIDGES WITH COMPRESSION SEALING The filtering cartridges described in this page, once installed on their container, are able to retain the impurities and dust contained in the sucked fluid, interfering with the vacuum pump or generator capacity in a negligible manner. They are produced with different materials that can be identified with the following abbreviations: - Series SP. Pleated paper filtering cartridge with compression sealing. - Series SS. Pleated polypropylene mesh filtering cartridge with compression sealing. - Series SA. AISI 304 stainless steel mesh filtering cartridge with compression sealing. The number after the article indicates the length in inches of the filtering cartridge.
3D drawings available at www.vuototecnica.net
Seal
D1 Ø 30
D2 Ø 30
H
Length
SP/4
D Ø 70
98
SS/4
70
30
30
SA/4
70
30
30
Art.
5.24
4”
Container art. FP 25/4 - FP 30/4
Filtering degree micron 25
98
4”
FP 25/4 - FP 30/4
50
98
4”
FP 25/4 - FP 30/4
50
g Conversion ratio: inch = mm ; pounds = = Kg 453.6 0.4536 25.4
GAS-NPT thread adapters available at page 1.117
5
FM SERIES QUICK COUPLING FILTERING CARTRIDGE CONTAINERS The containers of the FM series are suited for quick coupling filtering cartridges and are composed of a transparent SAN (Styrene-acrylic nitrile) container and a head with a reinforced polypropylene ring nut, coupled together with an interposed seal. The number after the article indicates the length in inches of the filtering cartridge. The cartridge can be chosen in various materials: pleated paper, pleated polypropylene mesh and AISI 304 stainless steel mesh. The quick coupling filtering cartridges are described at page 5.27, with all the indications regarding dimensions, materials and filtering degree of each one of them. Technical features Working pressure: from 0.5 to 9000 mbar abs. Temperature of the sucked fluid: from -10 to 45 °C
5
FM 20/7 FM 25/7 FM 30/7
d Ø G1/2” G3/4” G1”
241 241 247
18 21 24
D Ø 100 100 100
FM 25/10 FM 30/10 NF
G3/4” 133 315 G1” 145 321 Key for tightening the ring nut
21 24
100 100
Art.
A
B
C
133 133 145
E
F 49 50 51
Max capacity cum/h 30 70 100
Cartridge length 7” 7” 7”
48 49 50 49 50
50 51
70 100
10” 10”
Cartridge art. RP/7 - RS/7 - RA/7 RP/7 - RS/7 - RA/7 RP/7 - RS/7 - RA/7 RP/10 - RS/10 - RA/10 RP/10 - RS/10 - RA/10
Weight Kg 0.75 0.87 0.99 1.05 1.17
Note: The filtering cartridge is not part of the filtre, therefore, it must be ordered separately. Conversion ratio: inch = mm ; pounds = g = Kg 453.6 0.4536 25.4
3D drawings available at www.vuototecnica.net
4 holes ø 4.2 for fixing
5.25
GAS-NPT thread adapters available at page 1.117
5
FK SERIES QUICK COUPLING FILTERING CARTRIDGE CONTAINERS The containers of the FK series are suited for quick coupling filtering cartridges and are composed of a transparent PET (Polyethylene terephthalate) container and a head with a brass ring nut coupled together with an interposed seal. The number after the article indicates the length in inches of the filtering cartridge. The cartridge can be chosen in various materials: pleated paper, pleated polypropylene mesh and AISI 304 stainless steel mesh. The quick coupling filtering cartridges are described at page 5.27, with all the indications regarding dimensions, materials and filtering degree of each one of them. Technical features Working pressure: from 0.5 to 9000 mbar abs. Temperature of the sucked fluid: from -10 to 45 °C
3D drawings available at www.vuototecnica.net
4 holes ø 4.2 for fixing
A
B
C
FK 25/7 FK 30/7
d Ø G3/4” G1”
125 130
226 232
FK 25/10 FK 30/10 FK 50/10 FK 60/10
G3/4” G1” G1” 1/2 G2”
125 130 140 140
FK 30/20 FK 50/20 FK 60/20 NK
Art.
E
F
24 27
D Ø 100 100
50 51
Max capacity cum/h 70 100
Cartridge length 7” 7”
49 50
300 306 319 336
24 27 30 33
100 100 100 100
G1” 130 564 G1” 1/2 140 576 G2” 140 593 Key for tightening the ring nut
27 30 33
100 100 100
Cartridge art. RP/7 - RS/7 - RA/7 RP/7 - RS/7 - RA/7
Weight Kg 1.64 1.88
49 50 51 52
50 51 52 53
70 100 200 300
10” 10” 10” 10”
RP/10 - RS/10 - RA/10 RP/10 - RS/10 - RA/10 RP/10 - RS/10 - RA/10 RP/10 - RS/10 - RA/10
2.12 2.35 2.58 2.69
50 51 52
51 52 53
100 200 300
20” 20” 20”
RP/20 - RS/20 - RA/20 RP/20 - RS/20 - RA/20 RP/20 - RS/20 - RA/20
2.97 3.20 3.31
Note: The filtering cartridge is not part of the filtre, therefore, it must be ordered separately. 5.26
g Conversion ratio: inch = mm ; pounds = = Kg 453.6 0.4536 25.4
GAS-NPT thread adapters available at page 1.117
5
QUICK COUPLING FILTERING CARTRIDGES The filtering cartridges described in this page, once installed on their container, are able to retain the impurities and dust contained in the sucked fluid, interfering with the vacuum pump or generator capacity in a negligible manner. They are produced with different materials that can be identified with the following abbreviations: - Series RP. Pleated paper quick coupling filtering cartridge with double O-ring. - Series RS. Pleated polypropylene mesh quick coupling filtering cartridge with double O-ring. - Series RA. AISI 304 stainless steel mesh quick coupling filtering cartridge with double O-ring. The number after the article indicates the length in inches of the filtering cartridge.
Seal
RP/7 RP/10 RP/20
A Ø 45 45 45
RS/7 RS/10 RS/20 RA/7 RA/10 RA/20
Art.
B
Length
173 250 505
D Ø 70 70 70
7” 10” 20”
Container art. FM ../7 - FK ../7 FM ../10 - FK ../10 FM ../20 - FK ../20
Filtering degree micron 25 25 25
45 45 45
173 250 505
70 70 70
7” 10” 20”
FM ../7 - FK ../7 FM ../10 - FK ../10 FM ../20 - FK ../20
50 50 50
45 45 45
173 250 505
70 70 70
7” 10” 20”
FM ../7 - FK ../7 FM ../10 - FK ../10 FM ../20 - FK ../20
50 50 50
Conversion ratio: inch = mm ; pounds = g = Kg 453.6 0.4536 25.4
3D drawings available at www.vuototecnica.net
5
5.27
5