Access Internet – UMTS ODYS Loox Please take note of: This function provides an additional feature that is only with additional accessories that is not included in the delivered packaging content You need to use a suitable and compatible 3G UMTS dongle. Currently, only the dongle of Huawei E220, E261, EC122, MF190, E1750, ZTE MF190 and E156G support it. The use of any other dongles apart of those above listed can not be guaranteed and is at your own risk To connect to the Internet you need a SIM card from a mobile phone company, with the corresponding rate that allows an Internet connection Attention! You should deactivate the PIN-Code of your SIM-Card before starting use it. This enable the use for all popular mobile phones. You usually find The corresponding menu in the security settings of your phone
The device has the ability to be connected with an UMTS dongle. Access must be configured first 1. 2. 3. 4. 5. 6.
7.
Connect the dongle to the device with Turn the power on now. Click on in the overview page of the installed applications, "Settings" - "Wireless & Network" - "mobile networks". Select "access points" to add an Internet access. Press the Menu button and select "New APN". Key in the appropriate data from your mobile internet service provider (ISP) for the connection If necessary, please contact your mobile operator to key in all the appropriate access data. Key in the following datas from your provider:
Name: APN: Port: Userrname: Password: MCC: MNC: Authentication Type: Data also apply to these providers (Selection)
O2 O2 Internet
E-Plus WEB GPRS internet.eplus.de
Vodafone VF DE Web web.vodafone.de
eplus
262 07 PAP or CHAP Fonic
internet 262 03 PAP BASE Blau MEDION-Mobile simyo uboot vybemobile
262 02
Milleni.com PAYBACK smobil
T-Mobile T-Mobile Internet internet.t-d1.de 9201 internet t-d1 262 01
Congstar klarmobil callmobile REWE simply Tangens
Information are subject to change. Changes are reserved to the providers .
8. 9.
Press the Menu button and select "Save" to save the settings. The list of APNs set is displayed. This is usually only after setting up a value.
10. Make sure that the circle on the right side turn to green after you key in the APN otherwise click on it to enable it. 11. You can now leave the settings and start a new website using the browser 12. Watch out the status LED on the dongle. Usually (depending on model), this lit blue when the connection was established successfully. Blue flash means that connection to the provider is already succeed but still no data transmission. Attention! To add a new access point, the dongle must be connected! Please note the 3G icon in the status bar. If present, the connection is available. if fail please connect the dongle again with the device. If you need any support with the setting, please contact our Customer Service at support@axdia.de