GPI16_PD.pdf

GPI16 Universal GPI card with 10 GPI inputs and 16 GPI outputs A Synapse® product

COPYRIGHT ©2010 AXON DIGITAL DESIGN BV ALL RIGHTS RESERVED NO PART OF THIS DOCUMENT MAY BE REPRODUCED IN ANY FORM WITHOUT THE PERMISSION OF AXON DIGITAL DESIGN BV.

MISCELLANEOUS

Block schematic & I/O panel

GPI OUT 01 GPI INPUT 01

GPI OUT 02

GPI INPUT 02

GPI OUT 03

GPI INPUT 03

GPI OUT 04

GPI INPUT 04

GPI OUT 05

GPI INPUT 05

GPI OUT 06

GPI INPUT 06

GPI OUT 07

GPI INPUT 07 GPI INPUT 08

GPI OUT 08

LOGIC OPTO-COUPLER INPUTS

GPI OUT 09

GPI INPUT 09

GPI OUT 10

GPI INPUT 10

RELAY OUTPUTS

GPI OUT 11 GPI OUT 12 GPI OUT 13 GPI OUT 14

EVENTS

GPI OUT 15 GPI OUT 16

µP

GPI CONTROL TO/FROM MASTER 1

RACK CONTROLLER

2

INTERNAL SYNAPSE BUS

BPL06

GPI INPUTS

GPI OUTPUTS

GPI OUTPUTS

July 2009

GPI16

MISCELLANEOUS

Features The GPI16 card is a universal Synapse GPI I/O(Input/Output) card. The card is capable of forcing GPI output triggering based on events that are generated by cards located in the same rack. (E.g.

An alarm/event generated by any specific card in frame. This alarm/event is put on the bus. The GPI16 card will monitor the internal bus for events and close a relay in case of an event). The GPI16 can also be used as a slave card for Synapse functions, the 8x1 switcher (SDX08) or the VWI10 card for example. In these applications it is possible to control functions directly in to a Master, e.g. GPI based channel selection of the 8x1 switcher SDX08.

10 GPI inputs (opto coupled) 16 GPI outputs (change-over contacts by electromechanical relays) Frame surveillance mode where card events can be mapped to GPI outputs Slave mode where GPI in and outputs are mapped directly to card status and settings Frame mode where the card detect events from other cards in the same frame Latching and non-latching GPI inputs Loop through functionality Full control and status monitoring through the front panel of the SFR04/SFR08/SFR18 frame and the Ethernet port (ACP)

Complementary cards

SDX08, VWI10, CCR10, ARC20/21/22

Applications

GPI alarm monitoring of Synapse events GPI to SNMP conversion Where a third party GPI/O only product is integrated via the GPI16 into the Synapse network and/or SNMP system GPI to Synapse triggers (with ARC, VWI or SDX cards)

Ordering information Module: GPI16: Universal GPI card with 10 GPI inputs and 16 GPI outputs Standard I/O: BPL06_GPI16: I/O panel for GPI16

July 2009

GPI16

MISCELLANEOUS

Specifications GPI I/O Inputs Number of Inputs Outputs Number of outputs

Opto coupled 10 Relay based with change-over contacts 16

Miscellaneous Weight Operating Temperature Dimensions

Approx. 250g 0 째C to +50 째C 137 x 296 x 20 mm (HxWxD)

Electrical Voltage Power

July 2009

+24V to +30V <5 Watts

GPI16