HSI10_PD.pdf

HSI10

HD/SD SDI Universal databridge with monitoring outputs A Synapse® product

COPYRIGHT  2011 AXON DIGITAL DESIGN BV ALL RIGHTS RESERVED NO PART OF THIS DOCUMENT MAY BE REPRODUCED IN ANY FORM WITHOUT THE PERMISSION OF AXON DIGITAL DESIGN BV.

BRIDGING & VBI INSERTION

Video Processing

Block schematic & I/O panel HSI10

HD/SD-SDI OUTPUT HD/SD-SDI IN 1

EQ

ACTIVE VIDEO EMBEDDED AUDIO ANC BYPASS

ANC/VBI DATA INSERTER

ENCODER CVBS

ETHERNET GPI IN

LINUX POWERED µP

HD/SD-SDI OUTPUT

PREVIEW CVBS OUTPUT

RACK CONTROLLER INTERNAL SYNAPSE BUS

BPH04 BHX04

HD/SD SDI PREVIEW OUTPUT HD/SD SDI PROCESSED OUTPUT 1

relay bypass

HD/SD SDI INPUT (OPTIONAL FIBER INPUT)

HD/SD SDI PROCESSED OUTPUT 2 (OPTIONAL FIBER OUTPUT)

CVBS PREVIEW OUTPUT ETHERNET

GPI INPUT

November 2011

HSI10

BRIDGING & VBI INSERTION

Video Processing

Features The HSI10 is a standalone card that enables meta data, especially Teletext (WST-B) data, to be encoded onto a program feed; This card is able to insert AODB (WST-B, OP47-SDP) protocol in VBI/VANC. Typically this functionality has been serviced by 1RU box, single PSU solutions from specialist subtitling companies, so the modular HSI10 should save on rack space, increase reliability and be more cost effective, certainly in multi-channel applications.

 



     

SD and HD-SDI compatible Formats supported for insertion:  1080i/50 OP47  720p/50 OP47  625/50 WST-B Transparent for formats:  1080i/59.94  720p/59.84  525/59.94 Insert incoming data from the AODB (Axon Open Data Bridge) protocol in a parallel WST-B format or OP47 Bypass functionality which can be triggered by  Already available data in VBI/VANC  Ethernet input loss Ethernet connector for Teletext and AODB data input Locks to SDI input Full control and status monitoring through the front panel of the SFR04/SFR08/SFR18 frame and the Ethernet port (ACP) Optional 1 fiber input (replacing 1 SDI input) or 1 fiber output (replacing 1 SDI output) on I/O panel

Applications The HSI10 will typically be used in applications where Teletext subtitling is required on the program stream as part of the play out process. Generally this will be for live captioning where the program material is not available in time for the captions to be pre-prepared and added to the program material as part of the production process.

The subtitle data stream will normally be generated either from a subtitle preparation workstation directly or from a subtitle transmission product.

Ordering information Module:  HSI10: Caption and Teletext encoder with monitor outputs Standard I/O: BPH04_HSI10: I/O-panel for HSI10



Relay bypass I/O:  BHX04_HSI10: I/O-panel for HSI10 with relay bypass Fiber outputs:  BPH04T_FC/PC_HSI10: I/O-panel for HSI10 with fiber transmitter on FC/PC  BPH04T_SC_HSI10: I/O-panel for HSI10 with fiber transmitter on SC Fiber inputs:  BPH04R_FC/PC_HSI10: I/O-panel for HSI10 with fiber receiver on FC/PC  BPH04R_SC_HSI10: I/O-panel for HSI10 with fiber receiver on SC

November 2011

HSI10

BRIDGING & VBI INSERTION

Video Processing

Specifications SD/HD Serial Video Input Nunber of Inputs Standard

Equalization

Serial Video Output Number of Outputs Signal Level DC Offset Rise and Fall Time Overshoot Return Loss Wideband Jitter

Analog Video Output Standard Number of Outputs Connector Signal Level Impedance Return Loss Frequency Response Differential Gain Differential Phase SNR

Ethernet Standard Connector

Reference Video Input Standard Number of Inputs Connector Signal Level Impedance Return Loss

World System Teletext Standard

OP47

Standard

Miscellaneous

Weight Operating Temperature Dimensions

Electrical Voltage Power

November 2011

1 625/50 or 525/59.94 SMPTE 259M-C (270Mb/s) with SMPTE 272M embedded audio SMPTE 292M (1.5Gb/s), SMPTE 274M, SMPTE 296M 1080i/59.94, 1080i/50, 720p/59.94, 720p/50 Automatic to 100m @ 1.5Gb/s with Belden 1694A or equivalent cable.

3 (1 preview and 2 processed) 800mV nominal 0V ±0.5V 750ps nominal for SD < 10% of amplitude > 15dB up to 270MHz < 0.2UI

PAL (ITU624-4) or NTSC (SMPTE 170M), composite 1 BNC 1V nominal 75 Ohms > 35dB to 10MHz 0.5dB to 4.5 MHz < 0.6% < 0.7° > 75dB

10Base-T, 100Base-Tx IEEE 802.3 8P8C

PAL (ITU624-4), NTSC (SMPTE 170M) 2 on SFR18, 2 on SFR08, 1 on SFR04 BNC 1V nominal High impedance, with loop for termination > 25dB to 10MHz

WST-B ETSI EN 300 706 V1.2.1 (2003-04)

OP47

Approx. 250g 0 °C to +50 °C 137 x 296 x 20 mm (HxWxD)

+24V to +30V <10 Watts

HSI10