HSI21_PD.pdf

HSI21 X31 Cue encoder/decoder A Synapse® product

COPYRIGHT  2013 AXON DIGITAL DESIGN BV ALL RIGHTS RESERVED NO PART OF THIS DOCUMENT MAY BE REPRODUCED IN ANY FORM WITHOUT THE PERMISSION OF AXON DIGITAL DESIGN BV.

MISCELLANEOUS VIDEO PROCESSING

Video Processing

Block schematic & I/O panel

BPH04 BHX04

HD, SD SDI INPUT (OPTIONAL FIBER INPUT) HD, SD SDI PREVIEW OUTPUT HD, SD SDI PROCESSED OUTPUT 1 HD, SD SDI PROCESSED OUTPUT 2 (OPTIONAL FIBER OUTPUT)

CVBS PREVIEW OUTPUT ETHERNET

GPI INPUT

October 2013

HSI21

MISCELLANEOUS VIDEO PROCESSING

Video Processing

Features The HSI21 is a standalone card that can insert or decode X31 cues into or from the vertical blanking. The card will decode the cues and pass the status to GPI.

   

   

Formats:  1080i/50  625/50 X31 Cue encoding and decoding Inserts incoming cues generated on GPI’s on the platform in WST-B in SD format or OP47 in HD Output of GPI’s on extra card  Receive the incoming SDI or HD-SDI data stream.  Drive GPI16 card as output  GPI16 cards may be accessed by multiple decoder cards in same chassis.

GPI inputs come from HSI21 card Locks to SDI input Full control and status monitoring through the front panel of the SFR04/SFR08/SFR18 frame and the Ethernet port (ACP) Optional 1 fiber input (replacing 1 SDI input) or 1 fiber output (replacing 1 SDI output) on I/O panel

Complementary cards:  GPI16

Applications The HSI21 will typically be used in applications where you need to control devices on a remote location by GPI. This is an easy way to have your control embedded in the video. This also assures the users the trigger is correct timed in comparison with the video.

One of the use cases is the triggering of local advertisements. A head end can send one program and enables the local broadcaster to insert their own regional ads.

Ordering information Module:  HSI21: HD Cue tone encoder and decoder Standard I/O:  BPH04_HSI21: I/O-panel for HSI21 Relay bypass I/O:  BHX04_HSI21: I/O-panel for HSI21 with relay bypass Fiber outputs:  BPH04T_FC/PC_HSI21: I/O-panel for HSI21 with fiber transmitter on FC/PC  BPH04T_SC_HSI21: I/O-panel for HSI21 with fiber transmitter on SC Fiber inputs:  BPH04R_FC/PC_HSI21: I/O-panel for HSI21 with fiber receiver on FC/PC  BPH04R_SC_HSI21: I/O-panel for HSI21 with fiber receiver on SC

October 2013

HSI21

MISCELLANEOUS VIDEO PROCESSING

Video Processing

Specifications SD/HD Serial Video Input Nunber of Inputs Standard

Equalization

1 625/50 or 525/59.94 SMPTE 259M-C (270Mb/s) with SMPTE 272M embedded audio SMPTE 292M (1.5Gb/s), SMPTE 274M, SMPTE 296M 1080i/59.94, 1080i/50 Automatic to 100m @ 1.5Gb/s with Belden 1694A or equivalent cable.

Serial Video Output Number of Outputs Signal Level DC Offset Rise and Fall Time Overshoot Return Loss Wideband Jitter

3 (1 preview and 2 processed) 800mV nominal 0V ±0.5V 750ps nominal for SD < 10% of amplitude > 15dB up to 270MHz < 0.2UI

Analog Video Output Standard Number of Outputs Connector Signal Level Impedance Return Loss Frequency Response Differential Gain Differential Phase SNR

PAL (ITU624-4) or NTSC (SMPTE 170M), composite 1 BNC 1V nominal 75 Ohms > 35dB to 10MHz 0.5dB to 4.5 MHz < 0.6% < 0.7° > 75dB

Ethernet Standard Connector

10Base-T, 100Base-Tx IEEE 802.3 8P8C

Reference Video Input Standard Number of Inputs Connector Signal Level Impedance Return Loss

PAL (ITU624-4), NTSC (SMPTE 170M) 2 on SFR18, 2 on SFR08, 1 on SFR04 BNC 1V nominal High impedance, with loop for termination > 25dB to 10MHz

World System Teletext Standard

WST-B ETSI EN 300 706 V1.2.1 (2003-04) Packet 31 Independent Data Lines (IDL), ETSI EN 300 708 V1.2.1 (2002-12)

OP47 Standard

OP47-SDP (Issue 4, December 2008)

Miscellaneous Weight Operating Temperature Dimensions

Approx. 250g 0 °C to +50 °C 137 x 296 x 20 mm (HxWxD)

Electrical Voltage Power

October 2013

+24V to +30V <10 Watts

HSI21