SAM10_PD.pdf

SAM10 Digital to analog A/V bridge with SDI processed outputs A Synapse® product

COPYRIGHT ©2010 AXON DIGITAL DESIGN BV ALL RIGHTS RESERVED NO PART OF THIS DOCUMENT MAY BE REPRODUCED IN ANY FORM WITHOUT THE PERMISSION OF AXON DIGITAL DESIGN BV.

VIDEO D/A CONVERSION

Block schematic & I/O panel SAM10

SDI IN + EMBEDDED AUDIO

ProcAmp Jitter trap

Eq

EMB

+

WSS VI EDH proc.

DE-EMB A

16 ch

DE-EMB B

16 ch

DE-EMB C

16 ch

-

Digital Encoder

D/A D/A

AES/EBU IN 1

AES/EBU IN 2

SRC

SRC

Gain Phase Clip-detect

SDI OUT + EMBEDDED AUDIO

4 ch D/A

Gain Phase Clip-detect

SDI OUT + EMBEDDED AUDIO

2 ch

4 ch

2 ch

Gain Phase Clip-detect

D/A

Gain Phase Clip-detect

D/A

D/A

D/A

Y/R/CVBS Pr/G/Y Pb/B/C

ANALOG AUDIO 1 ANALOG AUDIO 2 ANALOG AUDIO 3 ANALOG AUDIO 4

4 ch µP

1

2

3

Audio outputs To Synapse bus 4

Rack controller

INTERNAL SYNAPSE BUS

BPL12

SDI INPUT (OPTIONAL FIBER INPUT) SDI OUTPUT 1 SDI OUTPUT 2 (OPTIONAL FIBER OUTPUT) Y (for Y_Pr_Pb)/ R/CVBS OUTPUT Pr/G/Y (for Y_C) OUTPUT Pb/B/C OUTPUT

AES/EBU INPUT - ANALOG AUDIO OUTPUT

July 2009

SAM10

VIDEO D/A CONVERSION

Features The SAM10 is another ultimate example of combined functions and features in a single module.

The module bridges the digital world to the analog world. With composite or component video and analog audio outputs, the SAM10 is the ideal card to source an analog tape machine from an SDI + embedded audio or digital audio signal. It can also be found in a studio or transmission environment that is being upgraded to a central SDI + embedded audio single layer router. If an AES/EBU layer is required, the SAM10 accepts this signal too. To preserve your investment after the infrastructure is digitized; it comes with an SDI by-pass function and can be used as an SDI de-embedder. The SAM10 is the mirror function of the ASM10.

12-bit video D/A conversion and encoding 24-bit audio D/A conversion and processing CVBS or Component analog video outputs Adjustable chroma filter 1.3MHz 0.65Mhz 1.0Mhz 2.0Mhz 3.0Mhz CIF QCIF Sub-carrier phase adjustment (-89 to 89 deg) Hue adjustment (-22 to 22deg) DAC gain (0.99 to 1.14 x) Selectable pedestal Proc-Amp Y gain C gain Y-Black C-Black Jitter trap for maximum isolation of SDI input Video Index and WSS insertion Embedding function into SDI output De-embedding function from SDI input to local analog outputs, bus outputs and local embedder Analog audio output @0dBFS can be selected between +12, +15, +18 and +14dBu Analog audio output can be any channel of the de-embedder or AES/EBU source ADD-ON audio output can be any channel of the de-embedder or AES/EBU source Individual AES/EBU input gain and Analog audio output gain.

SDI by-pass mode Full control and status monitoring through the front panel of the SFR04/SFR08/SFR18 frame and the Ethernet port (ACP) Optional 1 fiber input (replacing 1 SDI input) or 1 fiber output (replacing 1 SDI output) on I/O panel

Complementary cards: DAC20, DAC24, ADL24, DAS24, DIO48, DLA44, DLA43

Applications

Connecting analog legacy equipment to an SDI-Embedded infrastructure Converting a analog VTR to the digital world (together with an ASM10)

July 2009

SAM10

VIDEO D/A CONVERSION

Ordering information Module: SAM10: Digital to analog A/V bridge with SDI processed outputs Standard I/O: BPL12_SAM10: I/O panel for SAM10 Fiber outputs BPL12T_FC/PC_SAM10: I/O panel for SAM10 with fiber transmitter on FC/PC BPL12T_SC_SAM10: I/O panel for SAM10 with fiber transmitter on SC Fiber inputs: BPL12R_FC/PC_SAM10: I/O panel for SAM10 with fiber receiver on FC/PC BPL12R_SC_SAM10: I/O panel for SAM10 with fiber receiver on SC

July 2009

SAM10

VIDEO D/A CONVERSION

Specifications Serial Video Input Standard Number of Inputs Equalization Return Loss

625/50 or 525/59.94 SMPTE 259M-C (270Mb/s) with SMPTE 272M embedded audio 1 Automatic to 300m @ 270Mb/s with Belden 1694A or equivalent cable > 15dB up to 270MHz

SD Serial Video Output Standard Number of Outputs Signal Level DC Offset Rise/Fall Time Overshoot Return Loss AES Input Inputs Connector Standard Input Level Coupling Impedance Sampling Frequency

625/50 or 525/59.94 SMPTE 259M-C (270Mb/s) with SMPTE 272M embedded audio 2 800mV nominal 0V ±0.5V 800ps nominal < 10% of amplitude > 15dB up to 270MHz 2 26 pins female sub-D (balanced) AES-1992 for balanced synchronous or asynchronous PCM/AES 2V to 7V for balanced operation Transformer 110 Ohms 32kHz to 96kHz or 48kHz locked to video SRC=off

Analog Video Output Standard Number of Outputs Connector Signal Level Impedance Return Loss Frequency Response Differential Gain Differential Phase SNR

PAL (ITU624-4) or NTSC (SMPTE 170M) 3 BNC 1V nominal 75 Ohms > 35dB to 10MHz 0.5dB to 4.5 MHz < 0.6% < 0.7° > 75dB

Analog Audio Output Type Number of Outputs Connector Impedance Signal Level Frequency Response Gain Mismatch THD+N Crosstalk Dynamic range

Balanced analog audio 4 per channel (8 in single channel mode) 26 pins female sub-D 50 Ohms balanced 0dBFS => 12dBu, 15dBu, 18dBu or 24dBu < ±0.05dB (20Hz to 20kHz) < 0.25 dB @997Hz, -20dBFS Multi channel < 92dB @ 1kHz, -1dBFS < -100dB (20Hz to 20kHz) > 97dB @-60dBFS

Miscellaneous Weight Operating Temperature Dimensions

Approx. 250g 0 °C to +50 °C 137 x 296 x 20 mm (HxWxD)

Electrical Voltage Power

July 2009

+24V to +30V <13 Watts

SAM10