SAV08_PD.pdf

SAV08 Distribution amplifier with analog video outputs A Synapse® product

COPYRIGHT ©2010 AXON DIGITAL DESIGN BV ALL RIGHTS RESERVED NO PART OF THIS DOCUMENT MAY BE REPRODUCED IN ANY FORM WITHOUT THE PERMISSION OF AXON DIGITAL DESIGN BV.

VIDEO D/A CONVERSION

Block schematic & I/O panel SAV08

SDI IN

EQ

SDI OUT

RECLOCKER

SDI OUT

SDI OUT

SDI OUT

D/A

DIGITAL ENCODER

D/A D/A D/A

CVBS OUT CVBS/Y/G OUT CVBS/B/PB/Y OUT CVBS/R/PR/C OUT

µP

RACK CONTROLLER INTERNAL SYNAPSE BUS

BPL01

BPX01

SDI INPUT (OPTIONAL FIBER INPUT) SDI OUTPUT 1 SDI OUTPUT 2 SDI OUTPUT 3 SDI OUTPUT 4 CVBS OUTPUT 1 CVBS/Y/G OUTPUT 2 CVBS/B/Pb/Y OUTPUT 3 CVBS/R/Pr/C OUTPUT 4 For fiber connectivity see www.axon.tv

July 2009

SAV08

VIDEO D/A CONVERSION

Features The SAV08 is an SDI to composite, component and Y/C converter with a built-in SDI distribution amplifier. Its main application is a one to four SDI distribution amplifier with 4 analog outputs. It can also be used as a large router preview card or a generic monitoring D/A.

4 reclocked SDI outputs 4 configurable analog video outputs 4 composite outputs 1 composite and YC output 1 composite and RGB output 1 composite and YPrPb output Selectable vertical interval blanking 3 Y-Filters Normal Low pass Notch 4 C-Filters 1.3 MHz 0.65 MHz 1.0 MHz 2.0 MHz Selectable NTSC setup removal Y level adjustable for SMPTE, BetaCam Adjustable PrPb levels (700/1000mV) Full control and status monitoring through the front panel of the SFR04/SFR08/SFR18 frame and the Ethernet port (ACP) Optional 1 fiber input (replacing 1 SDI input) on I/O panel

Applications

Pre-routing DA with monitoring output Generic SDI Distribution with preview output

Ordering information Module: SAV08: Distribution amplifier with analog video outputs Standard I/O: BPL01_SAV08: I/O panel for SAV08 BPX01_SAV08: I/O panel for SAV08 with relay bypass Fiber inputs: BPL01R_FC/PC_SAV08: I/O panel for SAV08 with fiber receiver on FC/PC BPL01R_SC_SAV08: I/O panel for SAV08 with fiber receiver on SC

July 2009

SAV08

VIDEO D/A CONVERSION

Specifications Serial Video Input Standard Number of Inputs Equalization Return Loss

625/50 or 525/59.94 SMPTE 259M-C (270Mb/s) with SMPTE 272M embedded audio 1 Automatic to 300m @ 270Mb/s with Belden 1694A or equivalent cable 150m with BPX03 > 20dB up to 270MHz

SD Serial Video Output Standard Number of Outputs Signal Level DC Offset Rise/Fall Time Overshoot Return Loss Jitter

625/50 or 525/59.94 SMPTE 259M-C (270Mb/s) with SMPTE 272M embedded audio 4 800mV nominal 0V ±0.5V 520ps nominal < 10% of amplitude > 18dB up to 270MHz < 600ps 10Hz HPF

Analog Video Output Standard Number of Outputs Connector Signal Level Impedance Return Loss Frequency Response Differential Gain Differential Phase SNR

PAL (ITU624-4) or NTSC (SMPTE 170M), Component, YC and RGB 4 BNC 1V nominal 75 Ohms > 35dB to 10MHz 0.5dB to 4.5 MHz < 0.6% < 0.7° > 75dB

Miscellaneous Weight Operating Temperature Dimensions

Approx. 250g 0 °C to +50 °C 137 x 296 x 20 mm (HxWxD)

Electrical Voltage Power

July 2009

+24V to +30V <6 Watts

SAV08