GMW-HMW100_PD.pdf

GMW100 - HMW100

3Gb/s, HD, SD dual channel multiviewer and monitoring card with 2 SDI inputs A Synapse® product

COPYRIGHT  2012 AXON DIGITAL DESIGN BV ALL RIGHTS RESERVED NO PART OF THIS DOCUMENT MAY BE REPRODUCED IN ANY FORM WITHOUT THE PERMISSION OF AXON DIGITAL DESIGN BV.

MULTI-IMAGE PROCESSING AND DVI OUTPUT

Video Processing

Block schematic & I/O panel GMW100 – HMW100

3Gb/s, HD, SD IN 1

LINE SYNC

EQ

PRESCALER DVI DRIVER COMBINER SCALER INTEGRITY CHECKING

3Gb/s, HD, SD IN 2

DEEMBED

LINE SYNC

EQ

WITH BPH23 ONLY

TALLY & UMD CHARACTER GENERATION DVI MUX

BORDER INSERTION

PRESCALER

AUDIO LEVEL INSERTION TIMECODE INSERTION

INTEGRITY CHECKING

DVI OUT

-

DEEMBED -

3Gb/s, HD, SD OUT RECLOCKED 1

3Gb/s, HD, SD OUT RECLOCKED 2 WITH BPH24 ONLY

TALLY/UMD/LTC IN DVI RECEIVER FROM SLOT N+1

GPI IN PLL

1

REFERENCE INPUTS 2

DVI TRANSMITTER TO SLOT N-1

ΜP

RACK CONTROLLER

1

2

3

4

1

2

3

4

SYNAPSE BUS DVI I/O

INTERNAL SYNAPSE BUS

BPH23

BPH24

3Gb/s, HD, SD INPUT 1 3Gb/s, HD, SD INPUT 2 NC NC

TALLY, UMD, LTC and GPI INPUT

DVI OUTPUT (BPH23) 2x SDI OUTPUT (BPH24)

June 2011

G-HMW100

MULTI-IMAGE PROCESSING AND DVI OUTPUT

Video Processing

Features The GMW100 and the HMW100 are a dual channel monitoring cards that can be used stand alone or as part of SynView multi display system.

The unit has 2 serial SDI inputs capable of handling signals up to 3Gb/s. The free selected inputs are displayed within a WUXGA DVI stream (1920x1200 max with BPH23) or visible on a SDI signal up to 3Gb/s (BPH24).

Next to 2 scaled pictures the unit can display up to 16 channels of audio per video and these bar graphs can be positioned in different areas of the screen (side/under) A set of alarms can be viewed inside the screen as well. These alarms will be highlighted in case of for example a freeze frame or silence detection

      



   

        

2 inputs Low latency processing (20 mS for 50Hz, 17 mS for 59.94Hz) Full 10 bit in RGB domain (internal 20bit processing for scaling) Up to 1920x1200 resolution on DVI output (BPH23) Up to 1920x1080p on 3Gb/s SDI output (BPH24) Full variable scaling and positioning both inputs Alarm/Warning trigger (OSD) of the following parameters  Video freeze and black detection (with adjustable threshold and time)  WSS/VI/AFD info  Audio silence, clip and format detection  EDH/CRC/TRS info All inputs compatible with (mixing is allowed):  1080p 50 an 59.94  1080i and 720p 50 and 59.94 Hz  1080p (sf) and 720p 29.97, 25 and 23.98  SD 625 and 525 15pins sub-D connector for serial UMD, Tally protocols (TSL and ASCII) and GPI triggers 8, 16 and 32 character UMD capability Three assignable regions in or under monitor to display Input format, static UMD, Dynamic UMD or timecode Audio metering  4, 8 or 16 free selectable OSD audio level bar-graphs  Masked or transparent bar-graphs  AES/EBU, BBC, and VU scales  Customizable color schemes for audio meters  Free adjustable positioning Two definable clocks in Analog, Digital or Combined mode, with the following possible sources: System, VITC, ATC, SNTP (Ethernet), LTC, Up counter or Down Counter Color corrector UMD colors grey, Green, Red or Amber Border, UMD and Tally brightness adjustment Safe area markers Automatic 4:3 and 16:9 modes through VI or WSS triggers (SD-SDI inputs) GPI control for Aspect ratio (4:3 or 16:9), Full screen/ quad mode and Tally control Locks to Bi-level, Tri-level syncs or SDI input Full control and status monitoring through the front panel of the SFR04/SFR08/SFR18 frame and the Ethernet port (ACP)

Complementary cards:

 GIQ200, HIQ200, SIQ200, GMV200/220, HMV200/220, GQW200/220, HQW200/220, SQW200/220

Applications 

High resolution monitor walls

June 2011

G-HMW100

MULTI-IMAGE PROCESSING AND DVI OUTPUT

Video Processing

Display examples

June 2011

G-HMW100

MULTI-IMAGE PROCESSING AND DVI OUTPUT

Video Processing

Ordering information Module:  GMW100: 3Gb/s, HD, SD twin viewer to QWXGA converter on DVI or (3Gb/s, HD or SD) SDI with LTC input.  HMW100: HD, SD twin viewer to QWXGA converter on DVI or (3Gb/s, HD or SD) SDI with LTC input.

Standard I/O:  BPH23_GMW100: I/O-panel for GMW100-HMW100 with DVI output  BPH24_GMW100: I/O-panel for GMW100-HMW100 with SDI output

Specifications Serial Video Input Standard

625/50 or 525/59.94 SMPTE 259M-C (270Mb/s) with SMPTE 272M embedded audio SMPTE 292M (1.5Gb/s), SMPTE 260M, SMPTE 274M, SMPTE 296M, SMPTE 349M, SMPTE424

Equalization Return loss Number of inputs

1080i/59.94, 1080i/50, 720p/59.94, 720p/50 1080p/50 and 1080p/59.94 Automatic to 130m @ 1.5Gb/s with Belden 1694A or equivalent cable.

Automatic to 100m @ 3Gb/s with Belden 1694A or equivalent cable. > 15dB up to 1.5GHz 4

Reference Input through RRC Number of inputs Tri-level Bi-level

DVI output

Standard Number of outputs Cable driver

Serial video output Standard

Number of outputs

LTC Input

Standard Connector Number of inputs

Miscellaneous

Weight Operating temperature Dimensions

Electrical Voltage Power

June 2011

2 on SFR18, 2 on SFR08 and 1 on SFR04 SMPTE274M, SMPTE296M 600 mVp-p nominal, 75 Ohms terminated through loop PAL Black Burst ITU624-4/SMPTE318, Composite NTSC SMPTE 170M 1Vp-p nominal, 75 Ohms terminated through loop

DVI digital single link 1920 x 1200 1 Up to 10 meter of high quality DVI cable (Gefen)

SMPTE 292M (1.5Gb/s), SMPTE 260M, SMPTE 274M, SMPTE 296M, SMPTE 349M, SMPTE424A 2

SMPTE 12M 15pins D-sub 1

Approx. 250g 0 °C to +50 °C 137 x 296 x 20 mm (HxWxD)

+24V to +30V <16 Watts

G-HMW100