SDX08_PD.pdf

SDX08 8 SD-SDI to 1 SD-SDI switcher A Synapse® product

COPYRIGHT ©2010 AXON DIGITAL DESIGN BV ALL RIGHTS RESERVED NO PART OF THIS DOCUMENT MAY BE REPRODUCED IN ANY FORM WITHOUT THE PERMISSION OF AXON DIGITAL DESIGN BV.

DIGITAL VIDEO DISTRIBUTION

Block schematic & I/O panel SDX08

SDI IN 1

SDI IN 2

SDI IN 3

SDI IN 4

SDI IN 5

SDI IN 6

SDI IN 7

SDI IN 8

+

EQ

EQ

SDI OUT

ADJUSTABLE SWITCH TIMING SIGNAL DETECTION

EQ

EQ

EQ

EQ

EQ

EQ µP

PLL

1

REFERENCE INPUTS 2

CONTROLLED BY GPI16 SLAVE CARD

RACK CONTROLLER

INTERNAL SYNAPSE BUS

BPL01 BPX01

SD SDI INPUT 1 (OPTIONAL FIBER INPUT) SD SDI INPUT 2 SD SDI INPUT 3 (OPTIONAL FIBER INPUT) SD SDI OUTPUT (OPTIONAL FIBER OR CVBS OUTPUT) SD SDI INPUT 4 SD SDI INPUT 5 SD SDI INPUT 6 SD SDI INPUT 7 SD SDI INPUT 8 For fiber connectivity see www.axon.tv

July 2009

SDX08

DIGITAL VIDEO DISTRIBUTION

Features The SDX08 is an 8 channel SDI video switcher. The SDX08 routes 1 of 8 SDI-inputs to 1 SDIoutput. The SDX08 has 2 main functions, it can act as a backup-switcher and as a router.

Automatic backup function on all channels Switch back function in back-up mode Can be controlled by a dedicated GPI16 card (with tally back response) Free selection of line and sample for switching.

EDH detection Reclocked output Full control and status monitoring through the front panel of the SFR04/18 frame and the Ethernet port (ACP) Locks to Bi-level sync Optional 1 or 2 fiber inputs (replacing 1 or 2 SDI inputs) on I/O panel Optional 1 CVBS output (replacing 1 SDI output) on I/O panel

Applications

Generic or monitoring 8 by 1 switch Back-up switcher Small routing applications

Ordering information Module: SDX08: 8 SD to 1 SD switcher Standard I/O: BPL01_SDX08: I/O panel for SDX08 BPX01_SDX08: I/O panel for SDX08 with relay bypass Fiber outputs: BPL01T_FC/PC_SDX08: I/O panel for SDX08 with 1 fiber transmitter on FC/PC BPL01T_SC_SDX08: I/O panel for SDX08 with fiber 1 transmitter on SC Fiber inputs: BPL01R2_FC/PC_SDX08: I/O panel for SDX08 with 2 fiber receivers on FC/PC BPL01R2_SC_SDX08: I/O panel for SDX08 with 2 fiber receivers on SC BPL01R_FC/PC_SDX08: I/O panel for SDX08 1 with fiber receiver on FC/PC BPL01R_SC_SDX08: I/O panel for SDX08 with 1 fiber receiver on SC CVBS output: BPL01C_SDX08: I/O panel for SDX08 with CVBS output

July 2009

SDX08

DIGITAL VIDEO DISTRIBUTION

Specifications Serial Video Input Standard

625/50 or 525/59.94 SMPTE 259M-C (270Mb/s) with SMPTE 272M embedded audio

Number of Inputs Equalization

8 Automatic to 300m @ 270Mb/s with Belden 1694A or equivalent cable > 15dB up to 270MHz

Return Loss

SD Serial Video Output Standard

625/50 or 525/59.94 SMPTE 259M-C (270Mb/s) with SMPTE 272M embedded audio

Number of Outputs Signal Level DC Offset Rise/Fall Time Overshoot Return Loss

1 800mV nominal 0V ±0.5V 800ps nominal < 10% of amplitude > 15dB up to 270MHz

Reference Input through RRC Number of Inputs Bi-level

2 on SFR18, 2 on SFR08 and 1 on SFR04 PAL Black Burst ITU624-4/SMPTE318, Composite NTSC SMPTE 170M 1Vp-p nominal, 75 Ohms terminated through loop

Miscellaneous Weight Operating Temperature Dimensions

Approx. 250g 0 °C to +50 °C 137 x 296 x 20 mm (HxWxD)

Electrical Voltage Power

July 2009

+24V to +30V <7 Watts

SDX08