SEB10_PD.pdf

SEB10 SD 4 channel (2 AES/EBU) digital audio embedder A Synapse ® product

COPYRIGHT ©2010 AXON DIGITAL DESIGN BV ALL RIGHTS RESERVED NO PART OF THIS DOCUMENT MAY BE REPRODUCED IN ANY FORM WITHOUT THE PERMISSION OF AXON DIGITAL DESIGN BV.

EMBEDDING

Audio for Video

Block schematic & I/O panel SEB10

SDI IN+ EMBEDDED AUDIO

EQ EMB A

EMB B

SDI OUT + EMBEDDED AUDIO

EDH PROCESSING

SDI OUT + EMBEDDED AUDIO

2 CH

2 CH AES/EBU IN 1

SRC

2 CH

2 CH

2 CH

2 CH AES/EBU IN 2

GAIN PHASE

GAIN PHASE

SRC

2 CH 2 4 4 4 4

CH CH CH CH CH

4 CH

TEST TONE

µP

1

2

3

AUDIO INPUTS FROM SYNAPSE BUS 4

RACK CONTROLLER

INTERNAL SYNAPSE BUS

BPL02

BPL03

BPL03D

SDI INPUT (OPTIONAL FIBER INPUT) SDI + EMBEDDED OUTPUT 1 SDI + EMBEDDED OUT 2 (OPTIONAL FIBER OR CVBS OUT) AES/EBU INPUT/OUTPUT 1 (on sub-D of BPL03D) AES/EBU INPUT 2 (on sub-D of BPL03D)

For fiber connectivity see www.axon.tv

July 2009

SEB10

EMBEDDING

Audio for Video

Features The SEB10 is a digital audio embedder with 2 local AES/EBU inputs and the possibility to add 4 extra channels through the Synapse ADD-ON bus. The inputs can have a sample rate of 32 to 96 kHz by using the built-in sample rate converter. For Dolby-E and other transparent applications the SRC can be by-passed.4 AES/EBU inputs with sample rate converter (available with 110 Ohms and 75 Ohms inputs)

2 group embedder (1 local 1 ADD-ON) Sample Rate Converter on AES/EBU input Adjustable audio gain (in 0.25dB) and phase (0-180 deg) 4 extra audio channels (1 groups) with optional ADC20, ADC24, ADL24, and DIO24 AES/EBU inputs on 3pole screw terminal or sub-D (110-Ohms) or BNC (75 Ohms) Selectable test tone for all stereo inputs (including embedder B) EDH detection Full control and status monitoring through the front panel of the SFR04/SFR08/SFR18 frame and the Ethernet port (ACP) Optional 1 fiber input (replacing 1 SDI input) or 1 fiber output (replacing 1 SDI output) on I/O panel Optional 1 CVBS output (replacing 1 SDI output) on I/O panel

Complementary cards: ADC20, ADC24, ADL24, DIO24, DIO48, DLA44, DLA43

Applications

Generic AES/EBU embedding

Ordering information Module: SEB10: SD 4 channel (2 AES/EBU) digital audio embedder Standard I/O BPL02_SEB10: I/O panel for SEB10 with unbalanced AES/EBU in BPL03_SEB10: I/O panel for SEB10 with balanced AES/EBU in BPL03D_SEB10: I/O panel for SEB10 with balanced AES/EBU in on sub-D Fiber outputs: BPL02T_FC/PC_SEB10: I/O panel for SEB10 with fiber transmitter on FC/PC BPL02T_SC_SEB10: I/O panel for SEB10 with fiber transmitter on SC BPL03T_FC/PC_SEB10: I/O panel for SEB10 with fiber transmitter on FC/PC BPL03T_SC_SEB10: I/O panel for SEB10 with fiber transmitter on SC BPL03DT_FC/PC_SEB10: I/O panel for SEB10 with fiber transmitter on FC/PC BPL03DT_SC_SEB10: I/O panel for SEB10 with fiber transmitter on SC Fiber inputs: BPL02R_FC/PC_SEB10: I/O panel for SEB10 with fiber receiver on FC/PC BPL02R_SC_SEB10: I/O panel for SEB10 with fiber receiver on SC BPL03R_FC/PC_SEB10: I/O panel for SEB10 with fiber receiver on FC/PC BPL03R_SC_SEB10: I/O panel for SEB10 with fiber receiver on SC BPL03DR_FC/PC_SEB10: I/O panel for SEB10 with fiber receiver on FC/PC BPL03DR_SC_SEB10: I/O panel for SEB10 with fiber receiver on SC CVBS outputs: BPL02C_SEB10: I/O panel for SEB10 with CVBS output BPL03C_SEB10: I/O panel for SEB10 with CVBS output BPL03DC_SEB10: I/O panel for SEB10 with CVBS output

July 2009

SEB10

EMBEDDING

Audio for Video

Specifications Serial Video Input Standard Number of Inputs Equalization Return Loss

625/50 or 525/59.94 SMPTE 259M-C (270Mb/s) with SMPTE 272M embedded audio 1 Automatic to 300m @ 270Mb/s with Belden 1694A or equivalent cable > 15dB up to 270MHz

SD Serial Video Output Standard Number of Outputs Signal Level DC Offset Rise/Fall Time Overshoot Return Loss

625/50 or 525/59.94 SMPTE 259M-C (270Mb/s) with SMPTE 272M embedded audio 2 800mV nominal 0V ±0.5V 800ps nominal < 10% of amplitude > 15dB up to 270MHz

AES Input Connector Standard Number of Inputs Sampling Rate Resolution Minimum Input/Output Delay Number of Inputs Impedance Level

BNC, Screw terminal or 25 pins female sub-D (balanced) AES-1992 for balanced synchronous or asynchronous PCM/AES, SMPTE 276M for single ended synchronous or asynchronous PCM/AES 2 32 kHz to 96 kHz asynchronous 48 kHz Synchronous (SRC=off) 20 bits 2 ms 2 110 Ohms or 75 Ohms 0.2V to 1V nom for BNC, 2V to 7V for balanced operation

Miscellaneous Weight Operating Temperature Dimensions

Approx. 250g 0 °C to +50 °C 137 x 296 x 20 mm (HxWxD)

Electrical Voltage Power

July 2009

+24V to +30V <6 Watts

SEB10