SFR-Mobile_PD.pdf

SFR - Mobile 4 slot battery and/or AC operated mobile Synapse frame A Synapse® product

COPYRIGHT  2013 AXON DIGITAL DESIGN BV ALL RIGHTS RESERVED NO PART OF THIS DOCUMENT MAY BE REPRODUCED IN ANY FORM WITHOUT THE PERMISSION OF AXON DIGITAL DESIGN BV.

FRAMES

Features The SFR-Mobile is a 100% compatible Synapse frame designed for mobile applications and road use. The frame can hold up to 4 cards with 4 standard connector panels. Power to the frame can be either AC or DC (2x).

All power can be applied simultaneously where the AC power wins over applied DC power. The modular AC power connector can be future upgraded by a combi connector like the Lemo SMPTE These frames, together with the rack controllers and power supplies, form the base of the Synapse system. All frames contain the unique ADD-ON daisy chain bus. It enables you to embed audio and even video from one card to the other from within the frame (instead of external physical wires).

The bus is a central (passive) interface between the power supply, the front panel control and the cards. Beside the ADD-ON bus there is also an internal bus which distribute reference, power and control/monitoring data to all cards.

The optional, separately available rain and sun protective cover can be attached for outdoor use of the SFR-Mobile.

         

Portable Robust design Central genlock input(s) for all cards that require a reference Ethernet connection for remote control, setup and maintenance USB connector for GPI extender Easy, hot swappable fans Auto input range AC power supply Dual 12V (on 4p XLR) DC input Full control of all card and frame parameters through the intuitive interface on the outside front panel.

Internal Synapse ADD-ON daisy chain bus for audio, GPI and multiview applications Separate rack controller slot which doesn’t take up a card slot

Rack controllers The frame comes with a built-in rack controller like the ERC18 (for the SFR18).

Ordering information   

SFR-M: Portable Synapse frame SFR-M-SNMP: Portable Synapse frame, SNMP compatible SFR-M-COVER: Rain and Sun protective cover for outside use

March 2013

SFR Mobile

FRAMES

Specifications Dimensions height

202 (250 with weather cover)

Width

235 (340 with weather cover)

Depth (including front lid)

485 (including handles) (710 with weather cover)

Weight

SFR-Mobile With protective Cover

Power AC

DC (2x)

8.5 kg (18.7 lbs) 10 kg

Input: Wide input range: 104–126 & 207-253VAC at 47-63Hz Inrush current: <=25A Hold up time: 20ms Output: Max. output power: 100 Output voltage: +30V Tolerance (max): 5% (1.5V) Ripple/Noise: 0.5V (50MHz) Load Range: 0 .. 100W Fuse: 250V / 2AT – 1x Input: 12V DC (11.5-14.4V) Inrush current: <= TBD Hold up time: TBD Output: Max. output power: 100 Output voltage: +28V Load Range: 0 .. 100W

Fan noise

All SPL measurements are performed at a weighted measurement up to TBD dB with filter “A”.

Distance to DUT is 1 meter. Frames are placed one meter from the ground in a 19” rack of 47 RU. All unused space is closed with blind panels.

Miscellaneous Operating temperature Storage temperature

March 2013

0º to 50º C environmental temperature (32º to 104º F) -20º to 70º C environmental temperature (-4º to 158º F)

SFR Mobile