SVD10_PD.pdf

SVD10 Universal frame synchronizer with extended (24 frames) video delay offset and monitoring D/A converter A Synapse® product

COPYRIGHT © 2009 AXON DIGITAL DESIGN BV ALL RIGHTS RESERVED NO PART OF THIS DOCUMENT MAY BE REPRODUCED IN ANY FORM WITHOUT THE PERMISSION OF AXON DIGITAL DESIGN BV.

VIDEO DELAY SOLUTIONS

Video Processing

Block schematic & I/O panel SVD10

SDI OUT RECLOCKED

SDI OUT PROCESSED SDI IN

EDH PROCESSIN G

OFFSET DELAY

EQ

FRAME SYNC

SDI OUT PROCESSED

AUTOPHASER

R/CR/Y OUT

G/Y/CVBS OUT

ENCODER

B/CB/C OUT

µP

PLL

RACK CONTROLLER 1

2 INTERNAL SYNAPSE BUS

BPL01

BPX01

SDI INPUT (OPTIONAL FIBER INPUT) SDI RECLOCKED OUTPUT SDI PROCESSED OUTPUT 1 SDI PROCESSED OUTPUT 2 (OPTIONAL FIBER OR CVBS OUTPUT) G/Y/CVBS OUTPUT B/Pb/Y OUTPUT R/Pr/C OUTPUT

July 2009

SVD10

VIDEO DELAY SOLUTIONS

Video Processing

Features The SVD10 is a SD frame synchronizer, with autophaser and video delay of up to 24 frames (adjustable in frames, lines and pixels). The synchronizer function can be used to synchronize a non-synchronous signal or to compensate for a delay. New sync codes (TRS) are being generated and re-inserted in the output signal. The SVD10 has a totally transparent blanking, both horizontally and vertically. The unit has a Serial Digital (SDI) component input at 270Mb/s, one reclocked SDI output and two synchronized/delayed SDI outputs. Furthermore, the card has a programmable analog video output, RGB, composite and component. The video reference is connected through the central genlock input of the SFR18, SFR08 or SFR04 frames.

The line synchronizer function corrects timing errors (hops) that occur due to switching in a router.

In this case, a video reference is not required as the output clock frequency is derived from the input video clock.

Adjustable offset delay up to 24 frames Adjustment in frames, lines and pixels Frame synchronizer mode Line synchronizer/autophaser function in synchronizer mode Manual Freeze Output signal on input loss Freeze Black, Grey or Green Color bar V-bit synchronizing for enhanced autophasing (in 626 only) Analog preview output (RGB, YPrPb, CVBS+YC) Locks to Bi-level sync Full control and status monitoring through the front panel of the SFR04/SFR08/SFR18 and the Ethernet port (ACP) Optional 1 fiber input (replacing 1 SDI input) or 1 fiber output (replacing 1 SDI output) on I/O panel Optional 1 CVBS output (replacing 1 SDI output) on I/O panel

Applications

Compensation of uplink video delays Generic multi-frame timing compensation Virtual studio delay compensation

Ordering information Module: SVD10: Universal frame synchronizer with extended (24 frames) video delay offset and monitoring D/A converter Standard I/O: BPL01_SVD10: I/O panel for SVD10 Relay bypass I/O: BPX01_SVD10: I/O panel for SVD10 with relay bypass Fiber outputs: BPL01T_FC/PC_SVD10: I/O panel for SVD10 with fiber transmitter on FC/PC BPL01T_SC_SVD10: I/O panel for SVD10 with fiber transmitter on SC Fiber inputs: BPL01R_FC/PC_SVD10: I/O panel for SVD10 with fiber receiver on FC/PC BPL01R_SC_SVD10: I/O panel for SVD10 with fiber receiver on SC CVBS output: BPL01C_SVD10: I/O panel for SVD10 with CVBS output

July 2009

SVD10

VIDEO DELAY SOLUTIONS

Video Processing

Specifications Serial Video Input Standard

625/50 or 525/59.94 SMPTE 259M-C (270Mb/s) with SMPTE 272M embedded audio

Number of Inputs Equalization

1 Automatic to 300m @ 270Mb/s with Belden 1694A or equivalent cable 150m with BPX03 > 20dB up to 270MHz

Return Loss

SD Serial Video Output Standard

625/50 or 525/59.94 SMPTE 259M-C (270Mb/s) with SMPTE 272M embedded audio

Number of Outputs Signal Level DC Offset Rise/Fall Time Overshoot Return Loss Jitter

3 (1 reclocked and 2 processed) 800mV nominal 0V ±0.5V 520ps nominal < 10% of amplitude > 18dB up to 270MHz < 600ps 10Hz HPF

Analog Video Output Standard Number of Outputs Connector Signal Level Impedance Return Loss Frequency Response Differential Gain Differential Phase SNR

PAL (ITU624-4) or NTSC (SMPTE 170M), Component and RGB 3 BNC 1V nominal 75 Ohms > 35dB to 10MHz 0.5dB to 4.5 MHz < 0.6% < 0.7° > 75dB

Reference Input through RRC Number of Inputs Bi-level

2 on SFR18, 2 on SFR08 and 1 on SFR04 PAL Black Burst ITU624-4/SMPTE318, Composite NTSC SMPTE 170M 1Vp-p nominal, 75 Ohms terminated through loop

Miscellaneous Weight Operating Temperature Dimensions

Approx. 250g 0 °C to +50 °C 137 x 296 x 20 mm (HxWxD)

Electrical Voltage Power

July 2009

+24V to +30V <9 Watts

SVD10