2HX10_PD.pdf

2HX10 Dual channel HD/SD integrity checking probe with clean switch over function and wings or split screen creation capabilities A Synapse® product

COPYRIGHT © 2009 AXON DIGITAL DESIGN BV ALL RIGHTS RESERVED NO PART OF THIS DOCUMENT MAY BE REPRODUCED IN ANY FORM WITHOUT THE PERMISSION OF AXON DIGITAL DESIGN BV.

INTEGRITY CHECKING AND PROBING

Video Processing

Block schematic & I/O panel 2HX10

HD/SD SDI IN A

HD-SDI OUT 1+ EMBEDDED AUDIO

FRAME SYNC

EQ

2X2 OR 2X1 SWITCH PROBE A

HD/SD SDI IN B

SPLITSCREEN OR SIDE CURTAIN FUNCTION

HD-SDI OUT 2+ EMBEDDED AUDIO

FRAME SYNC

EQ

SD-SDI OUT (MONITOR)

PROBE B

SD-SDI OUT (MONITOR)

DOWN CONVERTER SPLIT IN 2 X ¼ PICTURE

CVBS OUT (MONITOR)

CVBS ENC

CVBS OUT (MONITOR)

GPI/O OR TRIGGER LOGIC

GPI-IN (MANUAL SW)

GPI OUT (STATUS)

PLL

1

µP

REFERENCE INPUTS 2

RACK CONTROLLER INTERNAL SYNAPSE BUS

BPH05 BHX05

HD/SD SDI INPUT 1 (OPTIONAL FIBER INPUT) HD/SD SDI OUTPUT 1(OPTIONAL FIBER OUTPUT) SD-SDI OUTPUT (MONITOR) CVBS OUTPUT (MONITOR) GPI INPUT/OUTPUT HD/SD SDI INPUT 2 (OPTIONAL FIBER INPUT) HD/SD SDI OUTPUT 2 (OPTIONAL FIBER OUTPUT) SD-SDI OUTPUT (MONITOR) CVBS OUTPUT (MONITOR)

July 2009

2HX10

INTEGRITY CHECKING AND PROBING

Video Processing

Features The 2HX10 is a dual channel high performance HD/SD SDI video and embedded audio probe (signal integrity monitor) with clean switch-over function. The switch function can be triggered by any of the integrity controls or by GPI. Besides the extensive probe functions, the cards also provide full line and frame synchronization on both inputs. A monitor output available in both SD and CVBS shows both inputs on a single screen (1/4 size each)

Clean backup switching through built-in frame synchronizers Preview output showing both signals on a single screen (monitoring quality) Creating wings and split screens Probe functions: SDI carrier detect TRS validation ANC checksum validation Video content freeze detection Video content black detection Timecode availability Audio channel detection (16 channels) Audio silence detection (4 pairs 2 groups) Audio Phase reversal detection within one group (4 pairs) Audio Clip/5 sample full-scale indication (4 pairs) Dolby E present detection Locks to Bi-level, Tri-level or SDI input Full control and status monitoring through the front panel of the SFR04/SFR08/SFR18 frame and the Ethernet port (ACP) Optional 2 fiber inputs (replacing 2 SDI inputs) or 2 fiber outputs (replacing 2 SDI outputs) on I/O panel

Applications

The 2HX10 can be used as station output card, and ingest quality control card or a generic 2 x 2 switch.

The integrity checking can also be performed for alarm monitoring purposes with the switch function disabled.

Generic probing with automatic back-up switching Creation of wings (see picture 1) Creation of split screens (see picture 2)

Picture 1: Wings example

July 2009

Picture 2: Split screen example

2HX10

INTEGRITY CHECKING AND PROBING

Video Processing

Ordering information Module: 2HX10: Dual channel HD/SD integrity checking probe with switch over function Standard I/O: BPH05_2HX10: I/O-panel for 2HX10 BHX05_2HX10: I/O-panel with relay bypass for 2HX10 Fiber outputs: BPH05T2_FC/PC_2HX10: I/O-panel for 2HX10 with 2 fiber transmitter on FC/PC BPH05T2_SC_2HX10: I/O-panel for 2HX10 with 2 fiber transmitter on SC Fiber inputs: BPH05R2_FC/PC_2HX10: I/O-panel for 2HX10 with 2 fiber receiver on FC/PC BPH05R2_SC_2HX10: I/O-panel for 2HX10 with 2 fiber receiver on SC

July 2009

2HX10

INTEGRITY CHECKING AND PROBING

Video Processing

Specifications HD/SD Serial Video Input Standard

Equalization Number of inputs Return Loss

625/50 or 525/59.94 SMPTE 259M-C (270Mb/s) with SMPTE 272M embedded audio SMPTE 292M (1.5Gb/s), SMPTE 260M, SMPTE 274M, SMPTE 296M, SMPTE 349M 1080i/59.94, 1080i/50, 720p/59.94, 720p/50 Automatic to 100m @ 1.5Gb/s with Belden 1694A or equivalent cable.

2 (auto or manual selection) > 15dB up to 1.5GHz

HD/SD Serial Video Output Standard

Signal Level DC Offset Rise and Fall Time Overshoot Return Loss

625/50 or 525/59.94 SMPTE 259M-C (270Mb/s) with SMPTE 272M embedded audio SMPTE 292M (1.5Gb/s), SMPTE 260M, SMPTE 274M, SMPTE 296M, SMPTE 349M 1080i/59.94, 1080i/50, 720p/59.94, 720p/50 800mV nominal 0V ±0.5V 200ps nominal for HD, 750ps nominal for SD < 10% of amplitude > 15dB up to 1.0Gb/s, > 10dB up to 1.5Gb/s

SD Serial Video output Standard Number of Outputs Signal Level DC Offset Rise/Fall Time Overshoot Return Loss Return Loss Wideband Jitter Video Delay

625/50 or 525/59.94 SMPTE 259M-C (270Mb/s) with SMPTE 272M embedded audio 2 800mV nominal 0V ±0.5V 800ps nominal < 10% of amplitude > 15dB up to 270MHz > 15dB at 270Mb/s < 0.2UI 1 field

Analog Video Output Standard Number of Outputs Connector Signal Level Impedance Return Loss Frequency Response Differential Gain Differential Phase SNR

PAL (ITU624-4) or NTSC (SMPTE 170M) 2 BNC 1V nominal 75 Ohms > 35dB to 10MHz 0.5dB to 4.5 MHz < 0.6% < 0.7° > 75dB

Reference Input through RRC Number of Inputs Tri-level Bi-level

2 on SFR18, 2 on SFR08 and 1 on SFR04 SMPTE274M, SMPTE296M 600 mVp-p nominal, 75 Ohms terminated through loop PAL Black Burst ITU624-4/SMPTE318, Composite NTSC SMPTE 170M 1Vp-p nominal, 75 Ohms terminated through loop

Miscellaneous Weight Operating Temperature Dimensions

Approx. 250g 0 °C to +50 °C 137 x 296 x 20 mm (HxWxD)

Electrical Voltage Power

July 2009

+24V to +30V <13 Watts

2HX10