Install Vinyl Stickers in Seven Steps

Install vinyl stickers in seven steps!!!

Look for a perfect surface

Before taking any other step to install a printed window sticker or a vinyl sticker, one must ensure that he/she have a clean, smooth and dry surface.

Clean the surface properly

If the surface is not clean enough then your next job is to make the surface spotless dirtless, non-oily and crystal and clear..

Mark the area

Once you are done with the above-mentioned tasks then mark a particular area from that entire cleaned surface.

Remove that white paper

All kinds of promotional decals or stickers are often attached to a white backing paper which actually protects sticker’s glue from air and moisture.

Place the sticker

Now, slowly place the promotional window sticker inside that marked area and fix it up there. Please do not forget to rub the surface of the sticker with a squeegee or a credit card.

Peel the transparent tapes

Last but not least, slowly peel the clear transparent tape, of at a comfortable angle. Please do it slowly and do not pull the sticker itself from its surface.

Some extra care You can use a pin or a sharp pointed object to poke out the existing bubble. To get the best results, do not try to adhere the sticker under extreme hot or extreme cold environment. The preferable temperature to apply these car window stickers is 70degree Fahrenheit.