New Features and Improvements [Date]
Hoang Van Cuong – HSD VIETNAM LTD
1
Certification Program
[Date]
2
Certification Program
[Date]
3
www.TeklaStructures.com
[Date]
4
Tekla User Assistance
[Date]
5
Tekla User Assistance
[Date]
6
Tekla User Assistance
[Date]
7
Tekla User Assistance
[Date]
8
Tekla User Assistance
[Date]
9
Tekla User Assistance
[Date] [Date]
10
Tekla User Assistance
[Date] [Date]
11
Tekla User Assistance
[Date] [Date]
12
Configuration Changes V18
V19
FULL-C
FULL-C
STD-C
STDL-C
PCD-C
DFR-C
ENG-C
CM-C
VIE-C
CM-M
STD-C
CM-C
DFR-C
ENG-C
VIE-C
EDU-C
DEV-C
PRI-C
CIP-C
To be discontinued in v19.
EDU-C
PCD-C
CIP-C
New Tekla Structures Primary configuration will substitute Steel Detailing Limited configuration.
DEV-C
Includes Model Organizer and Clash Check Manager functionality
13
Tekla Structures Primary Functionalities of Full Limitations of the Primary: 2500 parts 5000 rebars / rebar groups Unlimited: Bolts and bolt groups Reference files
Model and open bigger models, but not save
Tekla Structures Primary
Steel Staircase 1192 parts
15
Tekla Structures Primary Ranco project – Estimation, Geometry & Visualization - 1000+ CUs - Some reinforcements - Full geometry
16
Tekla Structures Primary Steel building 1960 parts
17
Tekla Structures Primary Housing block - estimation and production model - Mid level details,typical elements fully detailed - 3046 parts, 500+ Cast units - 2796 nos. of reinforcing bars, groups and meshes - Over 400 drawings created from the original model
18
Tekla Structures Primary Tendering & basic geometry
Sales and tendering model - Geometry, no details - 824 parts = 824 CUâ€&#x;s & Assmeblies
19
Construction Management - Configuration Model
Plan
Pour
Construction Modeling
Configuration changes
Construction Management Construction Management configuration includes three modes Depending on the mode, different functionalities are available which give greater control and flexibility to the user.
CM-C
Construction Viewer
17.4.2013
21
Model
Plan
Pour
Configuration changes
17.4.2013
22
Construction Modeling
Construction Modeling mode
Construction Management
Construction Viewer
Visually explore alternatives as well as analyze the model to optimize the cost and schedule data. Be better prepared to win and deliver more contracts profitably
17.4.2013
23
Construction Modeling
Construction Management Mode
Construction Management
Construction Viewer
Accurate material quantification for cost estimation and construction scheduling ensure the contractors win and complete projects safely, on time and within budget
17.4.2013
24
Construction Modeling
Construction Management Viewer
Construction Management
Construction Viewer
Smooth real-time collaboration and information sharing between the project parties. 17.4.2013
25
Model Organizer Makes easier Possibility to organize to manage the model the information for various created purposes: Design inside theareas model Purchasing packages
Possibility to create Element types organized groups for faster Lots andFactories intuitive reporting Model Organizer Effectively tool for+creating Object Browser BOM for purchasing packages Possibility to create hierarchies based on standardized products inside the company
Object Browser User can easily Possibility to create create own personalized reports fast and efficiently fortake different Enables user to fast purposes: quantity take offs from Purchasing packages Delivery packages Quality checking Possibility to do quick
desired information
quality check reports Easy and dynamic way to manage User caninformation create delivery created into the model packages based on different information Object Browser + Model Organizer Makes the use of other CM tools more effective
Object Browser New dynamic property browsing and reporting tool Powerful, intuitive, and efficient reporting of properties and information – Dynamic reporting of selected objects – Quickly check properties of objects – Sort and group properties interactively
– Easily customize and create templates for different purposes – Export to Excel
What's New in Steel v19.0
28
Model Organizer & Clash Check Manager Possibility to check the quality of tool design: Effective to manage the Tekla model vs. Reference file quality of design Rebar vs. Rebar Improves coordination Embed vs. Rebar Missingdisciplines connections between
User canmore for example Enables effective use group, and detailing of design prioritize, capacity rerun, Reduces: save and overlapping work, assign clashes. communication mistakes, Clash Check Manager + hassle, Model organizer waste at factory
Advanced Options Free text search
30
Advanced Options Write to file
31
Advanced Options Option Types New Model
Files created in model folder Standard.opt *.ini
Existing Model
options_model.db options_drawings.db options.ini
Updated settings Changes in settings Model-specific option in Advanced Options
User-specific option in Advanced Options
options_model.db options_drawings.db options.ini
options.bin ..\Users\<user>\Appdata\Local\Tekla Structures\<version>\UserSettings
32
Advanced Options Option Types
33
Curved Wall Reinforcement Create rebars with hooks to curved parts
Add Material Adding material to parts More flexible modelling – Attach and detach parts – Explode attached pars – Possible to modify attached parts
Create more complex models – Ideal for complex steel plates or other objects where 100 point limitation occurs, e.g. sketched profiles
Add Material Attach and detach parts to another parts. Explode attached parts.
Commands: Attach to Part Detach from Part Explode Part
Modify and inquire: The whole part Each attached part
In drawings attached parts are shown as normal parts.
Attach Part Easily model complex shapes – Use many parts to express complex geometry – Combine to a single part for reporting and drawings – Combined part is numbered as a single part – Easily model large complex plates – Flat plates can produce DSTV – New possibilities for folding and unfolding
37
Attach Part Attach part and detach part commands – Attach one or more parts to a part – Detach one or more attached parts – Explode to detach all attached parts
Visualization – View „Cuts and added material‟ to see the attached parts – Turn off to see the part as a single solid
Editing
Added Material: On
Added Material: Off
– Move, edit properties, cut, and modify attached parts just like regular parts
38
Attach Part - Example A new approach to unfolding – Model the folded part using individual plates, add cuts, bolts, etc. – Use Unfold Surfaces (21) to unfold the parts to individual flat plates – Re-assign bolt holes to the „main‟ plate (use the bolt parts command) – Attach all other the parts to the main plate and update (modify) the bolt holes – Number, and the part gets one mark
From this unfolded part produce – drawings, DSTV, reports, etc. of the unfolded plate
39
Reinforcing Bar Shape Catalog Benefits: NowAdding user rebars can set multiple to the model is now more intuitive reinforcement shapes to User now more options have thehas same shape code when placing the rebars and even though they have the placing is more easier slightly geometry User different is able to move the rebars before placing them
When the shape variants are listed in a report, they all get the same shape code
Custom Component Dialog Editor User is able to modify the dialog boxes of custom components more easily in Custom Component Dialog Editor. User can: Add tabs, images, labels, text boxes, lists Organize objects by dragging and using copy, cut and paste commands Edit the properties of parameters and attributes Prevent accidental modifications by locking
Formwork Components Basic timber plywood formwork Offers useful information for estimating quantities, sourcing, scheduling, planning work on site and making formwork drawings Component creates ties, clips, clamps and plywood panels everything needed in basic timber formwork
Formwork Custom Components Available in Cast in Place Model template (Default) and in “…Common\components_sketches\CIP”
Welding Improved welds in the model – – – – –
Weld marks visible in the model Visualize weld path and solids Around welds with correct length Improved weld placement Supports regional ways of working – AISC and ISO weld interpretations
Quickly and efficiently check welds – Verify weld positions in the model – Reduces the need to go to drawings or property dialogs – no need for “drawing weld marks” What's New in Steel v19.0
44
Welding Set weld representation to „Exact‟ – – – –
Enables enhanced weld visualization Arrow side weld solid will be visible Welds can be selected by selecting the solid Select welds, components, or assemblies to see weld marks
Weld solid – Arrow side weld will be displayed – Calculated from type and parameters – Supported types: Fillet weld, square groove, and beveled penetration welds – Unsupported types get place holder solid What's New in Steel v19.0
45
Welding XS_AISC_WELD_MARK – FALSE = ISO Weld mark – Above line used to create arrow side weld – For fillet welds, size represents throat (sa)
– TRUE = AISC/AWS Weld mark – Below line used to create arrow side weld – For fillet welds, size represents leg length (sz)
Fillet weld size control using prefix – A prefix ending with „s‟ or „a‟: size = sa – A prefix ending with „z‟: size = sz
What's New in Steel v19.0
46
Welding Other Multi line reference text – – – –
Model welds support multi-line reference text See the text in the model & the drawing Limit of 79 characters „New line‟ is 2 characters
Dragging of weld mark leader lines – Works now for around welds too What's New in Steel v19.0
47
DSTV Free Third Party DSTV Viewers – Visually check DSTV results – 2D and 3D views – Contour marking
More info on the extranet – 3rd party extensions
What's New in Steel v19.0
48
DSTV Enhanced output and customization – – – – – –
Reliable plate contours with complex cuts Improved weld preparation for plates Improved results with complex part cuts Use attached parts to create complex plates Customize DSTV headers Many fixes and improvements
Reliable output reduces errors – Save time and money
49
Drawing Snapshot Immediate Quick look review at any type the of drawing content without opening it Makes thetool Excellent drawing to check the content of drawings producing process more fluent Snapshot is automatically takenand Fast whenever easy way drawing to findis opened the rightand drawing saved from the list Snapshot represents the situation when drawing was last saved
Leader lines of associative notes Leader lines of associative notes
18.0
19.0
Dimensions and Clouds Dimensions Flip outside Dimension Angle dimensions Adding dimensions to general arrangement drawings
Clouds
18.0 18.0 18.0
19.0
19.0 19.0
Open Updated Drawings Opening updated drawings 18.0
19.0
Drawing Export Export to DWG/DXF using “paper space” Improved interoperability – Supports CAD standards enabling better collaboration
Model space – Drawing is 1:1 at drawing size and contains the drawing layout – Views are scaled, measurements must be scaled
Paper space – Drawing views are 1:1 in “Model” space without drawing layout – Views are not scaled, measurements are 1:1 – ”TSLayout” contains the drawing layout from Tekla Structures
What's New in Steel v19.0
54
Remove unnecessary drawing files Deleting unnecessary drawing files in single-user mode
Publish to Tekla BIMsight Improved export to Tekla BIMsight Rebars and Grids are now created in separate files Possibility to split the export by phases Benefits: Handling of the Tekla BIMsight model is now more easier Rebar related tasks are now more faster and easier to accomplish
PDF as a Reference Model Now user can import PDF as reference model. Benefits: More smoother workflow User is able to create models more faster Improves communication between the different parties
Precast segment
Export to Software; Revit API Link Exports Tekla Structures parts to an OpenBIM file which is then read by a Tekla developed Revit AddIn
Precast segment
Thank You!