Barwil Pricelist 2010_Layout 1 30/03/2010 2:16pm Page fc1
By Appointment to Her Majesty Queen Elizabeth II Manufacturer of Kitchen & Bathroom Taps & Mixers Barber Wilsons & Co. Ltd.
T R A D I T I O N A L & C O N T E M P O R A R Y TA P S
B R O C H U R E W I T H D I M E N S I O N A L D R AW I N G S A N D R E C O M M E N D E D R E TA I L P R I C E L I S T ( E X C L U D I N G VAT )
J U LY 2 0 1 0
Barwil Pricelist 2010_Layout 1 30/03/2010 2:16pm Page fc2
Traditional taps in six styles
Regent (R)
Most of the traditional fittings shown in this brochure are from the 1890’s (GA) range which have the original exposed top works, with traditional rubber tap washers. An alternative to this style is the Regent (R) range with "easyclean" shrouded head parts. The code numbers for the Regent range are the same as the 1890’s
Regent with ceramic disc (RCD)
range but are prefixed with the letter ‘R’instead of ‘GA’. For most Regent and GA styles we can now supply ceramic disc headworks. Regent ceramic disc (RCD) and GA ceramic disc (GCD). These give traditional styling with state of the art ceramic disc internals.
1890’s (GA)
1890’s with ceramic disc (GCD)
Mastercraft (MC)
The Mastercraft (MC) range is based on our original 1930’s design and incorporates a stylish Art Deco theme of hexagonal capstans, shrouds and spouts. Again, the code numbers are the same as the 1890’s range but are prefixed with the letters ‘MC’ instead of ‘GA’. Mastercraft is not available with ceramic disc headworks.
Throughout this catalogue taps which are available with ceramic discs are labelled with the suffix CD.
Regent with china lever handles (RFC)
Contemporary taps: Q1 and Q2
Contents Traditional Basin Fittings Bath Fittings Shower Fittings Waste & Cistern Levers Kitchen Mastercraft
Page No. 1-3 4-10 11-19 20 21-23 24-28
Q Range Basin Fittings Bath Fittings Accessories / Showers Arms Concealed Thermostats Traditional Spares General Information
Page No. 29-30 31-33 34 35 36-39 40-41
Barwil Pricelist 2010_Layout 1 30/03/2010 2:16pm Page 1
Prices excluding VAT Basin Fittings
Specification
Polished Brass
Chrome /Nickel
Inca/ Satin Chrome/ Weathered Satin Nickel Bronze
2123 (GA shown. Also available as R, GCD & RCD) 1⁄2" basin taps with 3" nose (pair).
135.34
142.24
179.02
152.92
As above but RFC style.
198.64
208.33
248.61
223.96
2124 (GA shown. Also available as R, GCD & RCD) 1⁄2" basin taps with 4" nose (pair).
135.34
142.24
179.02
152.92
As above but RFC style.
198.64
208.33
248.61
223.96
2125 (GA shown. Also available as R, GCD & RCD) 1⁄2" basin taps with 5" nose for use with inset basins (pair).
204.49
213.38
268.55
229.39
As above but RFC style.
274.35
284.18
341.76
305.48
6470 GA shown. Also available as R, GCD & RCD Monobloc basin mixer with pop-up waste.
220.31
229.30
281.90
246.50
6471 With plug and chain waste and chain boss on body.
220.31
229.30
281.90
246.50
6472 With plug and chain waste and chain stay.
220.31
229.30
281.90
246.50
6475 Monobloc basin mixer with pop-up waste.
232.00
241.00
295.00
257.00
6476 With plug and chain waste to replace pop-up.
220.31
229.30
281.90
246.50
6470 MONOBLOC BASIN MIXER 100 (4”) 15^
64 (21/2”)
35 (13/8”) max 125 (5”) 12mm DIA COPPER 300 (12”)
45 (13/4”) max
6475 MONOBLOC BASIN MIXER
1
Barwil Pricelist 2010_Layout 1 30/03/2010 2:16pm Page 2
Prices excluding VAT Basin Fittings
Specification
Polished Brass
Chrome /Nickel
Inca/ Satin Chrome/ Weathered Satin Nickel Bronze
6450 (GA shown. Also available as R, RCD & GCD) 3-hole basin mixer with pop-up waste, 115mm nozzle.
332.47
348.63
383.17
374.77
6455 As above but 140mm nozzle.
332.47
348.63
383.17
374.77
6451, 6456 With plug and chain waste and chain boss on nose.
332.47
348.63
383.17
374.77
6452, 6457 With plug and chain waste and chain stay.
332.47
348.63
383.17
374.77
As above but RFC style
418.94
439.25
482.77
472.19
150 (6”) min - 250 (10”) max 114/140 projection (47/16 - 51/2) 29 hole (13/16)
40 max (19/16”)
34 hole (15/16”)
/2” BSP
1
Flexible hose 300 max (12”)
6453 (GA shown. Also available as R, GCD & RCD) 3-hole basin mixer with swivel swanneck filler.
332.47
348.63
383.17
374.77
As above but RFC style.
418.94
439.25
482.77
472.19
150min (6”) - 250max (10”) 150mm (6”)
3 holes 29 (13/16”) 260mm (101/4”) 137mm (53/8”)
1
/2” BSP
6454 (GA shown. Also available as R, GCD & RCD) Wall mounted nozzle with valves. Waste not included.
369.93
384.48
423.45
413.33
As above but RFC style.
418.94
439.25
482.77
472.19
40 (19⁄16") Max wall thickness Finished wall surface
⁄ " Regent Deck Valve
1 2
⁄4" Nozzle Standard 203mm (8") projection c/w flow straightener
3
104 (4" )D dep eck th Valv e
Flexible hose 300 (12")
2
Barwil Pricelist 2010_Layout 1 30/03/2010 2:16pm Page 3
Prices excluding VAT Basin Fittings
Specification
Polished Brass
Chrome /Nickel
Inca/ Satin Chrome/ Weathered Satin Nickel Bronze
6459 (Regent shown. Also available as GA, GCD & RCD). 3-hole basin mixer with pop-up waste and swan-neck filler.
332.47
348.63
383.17
374.77
As above but RFC style.
418.94
439.25
482.77
472.19
150 (6”) min - 250 (10”) max
6008 (Regent shown. Also available as GA, GCD & RCD). Retractable hairdressers’ basin mixer with flexible hose and shampoo spray. Rests in a flush fitting independent holder. Incorporating single check valve to comply with Water Byelaws.
370.89
382.25
427.51
410.90
As above but RFC style.
434.93
448.30
497.08
481.91
1870 (GA shown. Also available as R) Monobloc bidet mixer for single hole rim. With pop-up waste and adjustable nozzle.
248.78
256.41
298.53
275.66
As above but RFC style
310.98
320.51
372.90
344.58
1870 MONOBLOC BIDET MIXER
72 (227/32”) 30^
35 (13/8”) max
1875 MONOBLOC BIDET MIXER
28 (13/32”)
92 (38/8”) 45 (13/4” max)
12mm DIA COPPER 300 (12”)
1875 (GA shown. Also available as R, GCD & RCD) Monobloc bidet mixer for single hole rim. With pop-up waste and adjustable nozzle.
248.78
256.41
298.53
275.66
3
Barwil Pricelist 2010_Layout 1 30/03/2010 2:16pm Page 4
Prices excluding VAT Bath Fittings
Specification
Polished Brass
Chrome /Nickel
Inca/ Satin Chrome/ Weathered Satin Nickel Bronze
4300 (GA shown. Also available as R, GCD & RCD) Bath/spray mixer for bath rim mounting. Incorporates single check valve to comply with Water Byelaws.
645.28
677.55
806.32
728.38
4308 As above but with unions for wall fixing.
645.28
677.55
806.32
728.38
179.87
189.54
217.44
203.76
275.41
235.20
Note: Due to the traditional shape of this mixer a short interval must be allowed for draining down purposes after turning the taps to the off position.
2134 (GA shown. Also available as R, GCD & RCD) 3â „4" bath pillar tap with 4" nose (pair).
B
900 (GA shown. Also available as R) 3â „4" globe tap for bath fixing (pair).
4
208.36
218.78
Barwil Pricelist 2010_Layout 1 30/03/2010 2:16pm Page 5
Prices excluding VAT Bath Fittings
Specification
Polished Brass
Chrome /Nickel
Inca/ Satin Chrome/ Weathered Satin Nickel Bronze
3308 (GA shown. Also available as R, GCD & RCD) Bath filler with wall unions.
370.04
395.76
478.22
425.44
3300 As above but for rim mounting.
370.04
395.76
478.22
425.44
3480SET (Regent shown. Also available as GA, GCD & RCD) 3⁄4" deck bath valves and nozzle to form bath filler.
468.86
493.35
535.32
530.36
3480DV 3⁄4" Deck valves. Pairs.
272.90
286.92
314.86
308.42
TT3480DN 1" deck bath nozzle - 8 3⁄4" projection.
146.94
157.42
171.42
169.23
Important note regarding installation: see page 41
250 (9 ⁄8") (as supplied) 11 can be reduced to 170 (6 ⁄16") on site. 7
5
Barwil Pricelist 2010_Layout 1 30/03/2010 2:16pm Page 6
Prices excluding VAT Bath Fittings
Specification
Polished Brass
3484SET (Regent shown. Also available as GA, GCD & RCD) A 4 hole deck set comprising hot and cold valves, diverter/ nozzle, and pull up hand spray. Incorporates single check valve to comply with Water Byelaws. As above but RFC style
Chrome /Nickel
Inca/ Satin Chrome/ Weathered Satin Nickel Bronze
713.08
743.18
876.18
798.92
891.35
928.98
1095.23
991.15
Important note regarding installation: see page 41
290 (113â „8") (as supplied) can be reduced to 1 210 (8 â „4") on site
4309RT (Available as GA, R, GCD & RCD) Bath/spray mixer with 1" (25mm) floor standards and bracing kit and 3400T waste.
1766.93
1924.40
2263.83
2068.75
4310RT (Available as GA, R, GCD & RCD) Bath/spray mixer with 2" (50mm) floor standards and bracing kit and 3400T waste.
1941.91
2151.85
2505.22
2313.23
4311RT (Available as GA, R, GCD & RCD) Bath/spray mixer with 2" (50mm) floor standards and bracing kit and 3400EXP waste.
1899.24
2109.83
2456.25
2268.08
4312RT (Available as GA, R, GCD & RCD) Bath/spray mixer with 1" (25mm) floor standards and bracing kit and 3400EXP waste.
1724.97
1878.90
2214.79
2019.85
TT3400T Bath waste, overflow to trap and 42mm tube.
689.29
759.27
881.71
816.18
TT3400EXP Bath waste, overflow to flow, trap and 42mm tube.
683.37
753.19
835.83
809.66
TT3400DP Bath waste, overflow to floor.
206.44
241.41
279.91
259.52
Note: The above assemblies are available with bath fillers to replace the bath/spray mixers and are then designated 3309-3312 (prices on application).
TT3400T
TT3400EXP TT3400DP
R4310
6
Barwil Pricelist 2010_Layout 1 30/03/2010 2:16pm Page 7
Prices excluding VAT Bath Fittings
4309RT (25mm Standards)
4311 (50mm Standards)
Specification
Polished Brass
Chrome /Nickel
Inca/ Satin Chrome/ Weathered Satin Nickel Bronze
TT3425/42 Floor standards for under roll.
266.70
274.69
329.22
295.30
PS55 42mm trap complete with waste plug and chain.
506.47
545.83
615.80
586.79
PS56 42mm elbow (to take trap outlet through floor).
92.71
96.21
101.48
103.45
PS57 42mm x 300mm length of tube.
45.50
59.52
80.47
63.94
PS57A Flange plate for 42mm diameter tube.
33.24
36.75
41.98
39.49
TT2"3425 pair 50mm floor standards.
398.91
475.92
545.83
511.63
TT2"679 Bracing kit to suit 50mm floor standards only.
178.33
207.11
233.08
222.67
TT1"3425/679 Pair 25mm. Floor Standards with Bracing Kit.
482.11
535.08
638.58
575.19
4310 (50mm Standards)
4312 (25mm Standards)
7
Barwil Pricelist 2010_Layout 1 30/03/2010 2:16pm Page 8
Prices excluding VAT Bath Fittings
Specification
TT3450 SET 3/4" Concealed 3 hole bath filler (incorporates wall stops, nozzle, compression tee and connections).
Polished Brass
357.01
Chrome /Nickel
Inca/ Satin Chrome/ Weathered Satin Nickel Bronze
376.52
432.10
404.77
270 (10 ⁄8") (as supplied) 1 can be reduced to 190(7 ⁄2") on site. 5
1 180 (7 ⁄8")
Finished wall surface
TT1250WS (Also available TCD) 1/2" Wall stops (pair).
219.96
249.94
271.59
268.69
TT3450WS 3/4" Wall stops (pair). As above but RFC style
233.81
246.38
283.17
264.85
292.26
307.98
353.96
331.06
90.96
97.99
117.24
105.31
729.61
832.66
784.33
TT3450WN 1" Wall nozzle.
Flange Dia 75 (3")
TT3452SET 3/4" Concealed 5 hole bath/shower mixer (incorporates wall stops, nozzle, divertor, compression fittings, back inlet, 17 1/2" (450mm) shower arm and 5" rose).
668.80
Note: For alternative size shower arms and roses, please refer to page 18 Important note regarding installation: see page 41
NOTE: Assembly includes all compression fittings but not tubes
8
Barwil Pricelist 2010_Layout 1 30/03/2010 2:16pm Page 9
Prices excluding VAT Bath Fittings
Specification
TT3450WD 3/4" Wall diverter.
Polished Brass
164.43
Chrome /Nickel
171.42
Inca/ Satin Chrome/ Weathered Satin Nickel Bronze
188.97
184.29
This diverter must be removed from the pipework for maintenance.
4306 (GA shown. Also available as R, GCD & RCD) Bath/spray mixer with slider bar. Wall mounting. Incorporates single check valve to comply with water byelaws.
N/A
774.31
946.01
832.41
4305 As above but for deck mounting. Incorporates single check valve to comply with water byelaws.
N/A
774.31
946.01
832.41
750 (29.5�) APPROX
Slider bar available separately. See page 17.
9
Barwil Pricelist 2010_Layout 1 30/03/2010 2:16pm Page 10
Prices excluding VAT Bath Fittings
Specification
Polished Brass
Chrome /Nickel
Inca/ Satin Chrome/ Weathered Satin Nickel Bronze
4302 (GA shown. Also available as R, GCD & RCD) Bath/shower mixer. Wall mounting.
720.99
765.52
849.20
822.90
4301 As above but for deck mounting.
720.99
765.52
849.20
822.90
Above items are supplied with 17 1/2" (450mm) shower arm and 5" rose. Note: For alternative size shower arms and roses, please refer to page 18.
‘B’ RISER KIT FOR 4302
‘C’ RISER KIT FOR 4301
Short – Max 585(23) Min 530(20 3/4) Long – Max 755(29 3/4) Min 700(27 3/4)
Adjustable
10
Barwil Pricelist 2010_Layout 1 30/03/2010 2:16pm Page 11
Prices excluding VAT Shower Fittings
Specification
Polished Brass
Chrome /Nickel
Inca/ Satin Chrome/ Weathered Satin Nickel Bronze
6000 (GA shown. Also available as R, GCD & RCD) Manual shower mixer with handspray and supporting cradle. Incorporates single check valve.
524.44
551.66
651.06
593.05
5300 (GA shown. Also available as R, GCD & RCD) Manual shower mixer with fixed riser.
543.66
572.91
653.96
615.87
Manual shower mixer with fixed riser, 17 1/2" (450mm) shower arm and 5" rose. Note: For alternative size shower arms and roses, please refer to page 18.
Thermostatic Shower Fittings
Specification
Polished Brass
PS53 Exposed Thermostatic mixer valve only and inlet bends.
681.42
Chrome /Nickel
702.52
Inca/ Satin Chrome/ Weathered Satin Nickel Bronze
773.72
755.20
7
11
Barwil Pricelist 2010_Layout 1 30/03/2010 2:16pm Page 12
Prices excluding VAT Thermostatic Shower and Bath filling valves
Specification
Polished Brass
PS53 CU Exposed Thermostatic mixer valve only and inlet bends with compression elbows suitable for 15mm dia. copper tube.
Chrome /Nickel
Inca/ Satin Chrome/ Weathered Satin Nickel Bronze
681.42
702.52
773.72
755.20
881.11
907.49
1026.25
975.57
PERFORMANCE OF THERMOSTATIC VALVE Flow Rates at Equal Pressure Drops. (Open outlet only. Does not allow for losses through pipes & fittings). Pressure drop (bar)
0.1
0.5
1.0
1.5
2.0
3.0
4.0
5.0
Flow rate (litres/min)
14
30
48
55
61
76
90
102
53BA (Regent shown, also available as GA) Thermostatic bath filler.
53 BA
EXPOSED THERMOSTATIC SHOWER COMPONENTS TT5600 1 x PS53-Exposed Thermo Valve 1 x PS49-Riser, Wall Elbow, Shower Arm & 125mm Rose TT5700 1 x PS53-Exposed Thermo Valve 1 x TT57SH Control Valve "Shower" 1 x PS49-Riser, Wall Elbow, Shower Arm & 125mm Rose TT5702 1 x PS53-Exposed Thermo Valve 1 x TT57SH-Control Valve "Shower" 1 x TT57SP-Control Valve "Spray" c/w PS86A x 3⁄4 F x 1⁄2 M Adaptor 1 x PS89A-Thermo.valve Outlet 1 x PS49-Riser, Wall Elbow, Shower Arm & 125mm Rose 1 x PS03-Handspray & Flex 1 x PS50-Wall Mounted Cradle
12
TT5704 1 x PS53-Exposed Thermo Valve TT57SH-Control Valve "Shower’’ c/w 3⁄4 Compression Nut 1 x TT57SP-Control Valve "Spray" c/w PS86A-3⁄4 F x 1⁄2 M Adaptor 1 x PS89A-Thermo Valve Outlet 1 x PS49-Riser, Wall Elbow, Shower Arm & 125mm Rose 1 x PS03-Handspray & Flex 1 x TT28820BW-Slider Assembly To Accept Handspray
TT6003 1 x PS53-Exposed Thermo Valve 1 x PS89-Outlet Adaptor 3⁄4F x 1⁄2M c/w Check Valve 1 x PS03-Handspray & Flex 1 x TT28821BW-Slider Bar
TT6002 1 x PS53-Exposed Thermo Valve 1 x PS04-Handspray, Flex & Cradle
5700BA 1 x PS53-Exposed Thermo Valve 1 x TT57BA-1" Stopcock & Nozzle 1 x TT57SH-Control Valve "Shower" c/w 3⁄4 Compression Nut 1 x PS49-Riser, Wall Elbow, Shower Arm & 125mm Rose
PS49 1 x PS30S-Riser Pipe 1 x PS40A-Wall Elbow 1 x PS29S-Shower Arm 450mm 1 x PS10-125mm Rose
5702BA 1 x PS53-Exposed Thermo Valve 1 x TT57SH-Control Valve "Shower" 1 x TT57TEE/SP-Tee Control Valve c/w PS86A-3⁄4 F x 1⁄2 M Adaptor 1 x PS03-Handspray & Flex 1 x PS50-Wall Mounted Cradle 1 x TT57BA-1" Stopcock & Nozzle 1 x PS49-Riser, Wall Elbow, Shower Arm & 125mm Rose 5704BA 1 x PS53-Exposed Thermo Valve 1 x PS57SH-Control Valve "Shower" 1 x PS57TEE/SP-Tee Control Valve c/w PS86A-3⁄4 F x 1⁄2 M Adaptor 1 x TT57BA-1" Stopcock & Nozzle 1 x PS49-Riser, Wall Elbow, Shower Arm & 125mm Rose 1 x PS03-Handspray, & Flex 1 x TT28820BW-Slider Assembly To Accept Handspray
Barwil Pricelist 2010_Layout 1 30/03/2010 2:16pm Page 13
Prices excluding VAT Thermostatic Bath Showers
Specification
Polished Brass
Chrome /Nickel
Inca/ Satin Chrome/ Weathered Satin Nickel Bronze
5700BA (Regent shown, also available as GA, GCD & RCD) Thermostatic dual control shower/bath filler. Supplied with 17 1/2" (450mm) shower arm and 5" rose.
1207.60
1246.45
1437.63
1339.95
5702BA (Regent shown, also available as GA, GCD & RCD) Thermostatic triple control shower/bath filler with handspray on wall mounted cradle. Supplied with 17 1/2" (450mm) shower arm and 5" rose.
1480.45
1542.67
1848.44
1658.36
5704BA (Regent shown, also available as GA, GCD & RCD) Thermostatic triple control shower/bath filler with handspray mounted on slider/riser tube. Supplied with 17 1/2" (450mm) shower arm and 5" rose.
1505.58
1567.46
1883.18
1685.05
Note: For alternative size shower arms and roses, please refer to page 18.
5700 BA
5702BA
NB. All riser pipes can be shortened on site.
PERFORMANCE OF BATH FILLING THERMOSTATIC VALVE Flow Rates at Equal Pressure Drops. Through 1" valve). Bar
0.1
0.3
0.5
0.8
1.0
2.0
3.0
4.0
5.0
litre/ min
9.9
17
24
29
38
50
60
70
78
5704BA Above items are all shown with a 5" rose alternative roses are available - please see page 18 for further details.
13
Barwil Pricelist 2010_Layout 1 30/03/2010 2:16pm Page 14
Prices excluding VAT Thermostatic Showers
TT5600
Specification
Polished Brass
TT5600 Thermostatic mixer with fixed overhead shower. Supplied with 17 1/2" (450mm) shower arm and 5" rose.
917.55
MC5600 Mastercraft version of thermostatic mixer with fixed overhead shower. Supplied with 17 1/2" (450mm) shower arm and 5" rose.
N/A
Note: For alternative size shower arms and roses, please refer to page 18.
Chrome /Nickel
Inca/ Satin Chrome/ Weathered Satin Nickel Bronze
950.55
1065.98
1021.83
1045.59
1172.60
1123.98
‘A’ RISER KIT FOR 5600 Short 500 (19 3/4") Long 670 (26 1/2")
5700
1295 (51” CTS)
5700
200mm (8” CTS)
5700 (Regent shown, also available as GA, GCD & RCD) Thermostatic mixer with fixed overhead shower and separate valve. Supplied with 17 1/2" (450mm) shower arm and 5" rose.
1005.79
1041.45
1185.07
1119.58
5704 (Regent shown, also available as GA, GCD & RCD) Thermostatic mixer with separate valves to control overhead and hand shower on slider. Supplied with 17 1/2" (450mm) shower arm and 5" rose.
1253.14
1296.49
1555.77
1393.72
5702 (Regent shown, also available as GA, GCD & RCD) Thermostatic mixer with separate valves to control overhead and hand shower on cradle. Supplied with 17 1/2" (450mm) shower arm and 5" rose.
1228.08
1271.67
1521.01
1367.03
Note: For alternative size shower arms and roses, please refer to page 18. 5704
5704
5702
NB. All riser pipes can be shortened on site.
1295 (51” CTS)
1295 (51” CTS)
5702
Above items are all shown with a 5" rose alternative roses are available - please see page 18 for further details.
14
200 (8” CTS)
200mm (8” CTS)
Barwil Pricelist 2010_Layout 1 30/03/2010 2:16pm Page 15
Prices excluding VAT Thermostatic Handspray & Concealed Thermostats
Specification
Polished Brass
Chrome /Nickel
Inca/ Satin Chrome/ Weathered Satin Nickel Bronze
TT6002 Thermostatic mixer with handspray and cradle. Please refer to page 11 & 12 for dimensions.
846.68
872.89
1007.86
938.35
TT6003 Thermostatic mixer with handspray and wall mounted slider bar. Please refer to pages 11 and 12 for dimensions.
N/A
936.00
1130.80
1006.19
PS53C Recessed thermostatic shower mixer 229mm (9") round wall plate.
757.12
780.46
864.98
839.01
Important note regarding installation: see page 41 min
PS53CSQ Recessed thermostatic shower mixer 200mm (8") square wall plate.
808.71
833.78
925.33
896.33
Important note regarding installation: see page 41
15
Barwil Pricelist 2010_Layout 1 30/03/2010 2:16pm Page 16
Prices excluding VAT Concealed Thermostats
Specification
PS53C1 & PS53C1-CD (Ceramic Disc) Recessed thermostatic shower mixer on rectangular plate with separate flow valve.
Polished Brass
995.81
Chrome /Nickel
Inca/ Satin Chrome/ Weathered Satin Nickel Bronze
1026.65
1152.54
1103.64
1272.92
1419.64
1368.38
1483.78
1679.24
1595.07
Important note regarding installation: see page 41
PS53C2 & PS53C2-CD (Ceramic Disc) Recessed thermostatic shower mixer on square plate with separate flow valves for shower & spray.
1234.73
Important note regarding installation: see page 41
PS53C3 & PS53C3-CD Recessed thermostatic shower mixer on square plate with separate flow valves for shower, spray & bath.
1440.57
Important note regarding installation: see page 41
16
Barwil Pricelist 2010_Layout 1 30/03/2010 2:16pm Page 17
Prices excluding VAT Handspray & Shower Arms
Specification
Polished Brass
Chrome /Nickel
Inca/ Satin Chrome/ Weathered Satin Nickel Bronze
6001 (GA shown. Also available as R, GCD & RCD) Manual shower mixer with handspray and wall mounted slider bar. Incorporating single check valve to comply with Water Byelaws.
N/A
634.60
779.47
682.17
TT28821BW Slider Bar Complete (handspray and flex please order separately as PS03 refer to page 19).
N/A
147.03
206.23
158.06
750 (29.5�) APPROX
PS16 Comprises standard 171â „2" shower arm, back inlet and 5" rose. For any variations please order individual components as set out on page 18.
149.23
170.01
200.97
182.73
17
Barwil Pricelist 2010_Layout 1 30/03/2010 2:16pm Page 18
Prices excluding VAT Shower Arms & Shower Accessories
Specification
PS73 Comprises standard 800mm straight shower arm, back inlet and 5" (125mm) rose. For any variations please order individual components as set out below.
Polished Brass
133.28
Chrome /Nickel
176.95
Inca/ Satin Chrome/ Weathered Satin Nickel Bronze
228.73
190.24
Back inlet PS41
Compression joint
Showerarm PS80 800mm long (can be reduced on site)
5" diameter rose PS10
Back inlets available: PS41 back inlet MCPS41 Mastercraft style back inlet.
68.33 N/A
82.03 90.24
89.68 98.63
88.18 96.99
41.75 47.57 47.57 47.54
43.04 50.42 50.42 50.42
48.29 57.04 57.04 57.04
46.26 54.20 54.20 54.20
39.16 97.33 127.54 147.84
44.91 106.69 140.61 164.47
63.02 141.83 187.74 218.41
48.29 114.70 151.17 176.83
50.19
50.33
62.92
54.10
Shower arms available: PS29S 171⁄2" (450mm) shower arm. PS29L 24" (600mm) shower arm. PS80 32" (800mm) straight shower arm (3⁄4" BSP out). PS80A 32" (800mm) straight shower arm (1⁄2" BSP out). Roses available: PS10 5" diameter rose. PS44 8" diameter rose. PS45 10" diameter rose. PS46 12" diameter rose.
PS50 Wall Mounted Cradle for Handspray.
18
Barwil Pricelist 2010_Layout 1 30/03/2010 2:16pm Page 19
Prices excluding VAT Shower Accessories
Specification
Polished Brass
TT67 S/Kit for GA or R fittings MC67 S/Kit for Mastercraft fittings
Chrome /Nickel
N/A N/A
Inca/ Satin Chrome/ Weathered Satin Nickel Bronze
317.46 349.20
418.15 459.97
341.28 375.41
Designed to provide a handspray with a flexible hose as an optional attachment to a manual or thermostatic fixed overhead shower. Kit comprises handspray, cradle and two-way diverter.
PS60 Ball joint swivel only.
27.33
28.14
32.77
30.24
PS61 4" skirted rose.
39.16
44.91
63.02
48.29
TT3430 Shower Tray Waste. 85 (33⁄8") dia. flange x 85 (33⁄8") tail (11⁄2" BSP).
17.35
19.27
28.20
20.80
PS62 Wall outlet (1⁄2" BSP outlet).
33.90
34.93
43.77
37.59
1
/2” BSP
42.0
13.0
65.0 1
/2” BSP 42.0
PS05 Flexible hose.
24.92
25.67
58.67
27.59
PS03 Flexible hose complete with handspray.
83.88
86.49
150.83
92.98
PS02 Handspray.
57.90
60.80
91.36
65.37
17.35
27.28
18.65
TT61600 Wall bracket and swivel connector. (PS03 handspray and flex order seperately).
N/A
19
Barwil Pricelist 2010_Layout 1 30/03/2010 2:16pm Page 20
Prices excluding VAT Wastes & Cistern Levers
Specification
Polished Brass
Inca/ Satin Chrome/ Weathered Satin Nickel Bronze
TT3408W Bath pop-up waste and overflow set 550mm flexible tube and cable.
70.57
74.14
104.63
79.68
TT3408W-EXT As above with 900mm flexible tube and cable
70.57
74.14
104.63
79.68
TT3408W-XXL As above with 1300mm flexible tube and cable
70.57
74.14
104.63
79.68
TT3410 Basin waste with brass plug and chain. 60mm (23⁄8") dia. flange x 85mm (33⁄8") tail (11⁄4" BSP)
25.59
27.92
44.62
30.03
TT3435 Slotted sink waste. 85mm (33⁄8") dia. flange x 85mm (33⁄8") tail (11⁄2" BSP)
26.62
29.23
53.54
31.42
TT3400 Bath waste, plug, chain and overflow set. 72mm (27⁄8") dia. flange x 72mm (27⁄8") tail (11⁄2" BSP)
37.09
40.75
66.58
43.81
TT3420/15 Cistern lever handle with 150mm shank.
64.92
68.24
82.03
73.37
TT3420/25 As above with a 250mm shank.
79.20
82.50
96.16
88.68
TT3420/35 As above but with 350mm shank for concealed cisterns.
79.20
82.50
96.16
88.68
TT3420/35
TT3420-15/25
20
Chrome /Nickel
Barwil Pricelist 2010_Layout 1 30/03/2010 2:16pm Page 21
Prices excluding VAT Kitchen Mixers & Kitchen Taps
Specification
Polished Brass
Chrome /Nickel
Inca/ Satin Chrome/ Weathered Satin Nickel Bronze
1010 (Regent shown. Also available as GA, GCD & RCD) 1â „2" pillar sink mixer with swivel nozzle.
255.94
268.74
348.33
288.92
2010 (GA, R, GCD & RCD) As above but wall mounted, concealed supplies.
255.94
268.74
348.33
288.92
1010 & 2010 as above RFC style
325.93
339.50
421.53
364.95
2015 (GA, R, GCD & RCD) As above but wall mounted, exposed supplies.
284.10
298.30
386.65
320.66
2015 As above but RFC style. For swanneck sizes please refer to dimension page 23.
361.88
375.45
457.50
403.61
1040 (GA shown. Also available as R, GCD & RCD) Sink mixer with flexible hose spray for rinsing items before dishwashing. The hand held spray is retractable and rests in a flush fitting independent holder.
N/A
470.12
611.17
505.36
As above but RFC style.
N/A
592.35
770.06
636.80
NB. Mixers have single flow nozzles fitted with an aerator. Single check valves are incorporated in the hot and cold inlets to comply with water byelaw 25.IRN 101.
40
2010 1/2 BSP
21
Barwil Pricelist 2010_Layout 1 30/03/2010 2:16pm Page 22
Prices excluding VAT Basin Mixers
Specification
1030 (Only available RFC) Mixer and handspray for fitting into work surface at a fixed centres of 203mm. Handspray can be located in a suitable position close by.
Polished Brass
Chrome /Nickel
N/A
Inca/ Satin Chrome/ Weathered Satin Nickel Bronze
471.62
553.64
506.97
Note: 1030 and 1040 Handspray operation interupts the flow through the nozzle at the same temperature.
40
22
260 (RFC shown) 1⁄2" bib tap with quarter turn china lever handle (pair).
191.61
208.33
241.56
223.96
260 (GA shown. Also available as R, GCD & RCD) 1⁄2" sink bib tap (pair).
135.34
142.21
179.02
152.87
TT282 Backplate elbow (each).
17.35
18.20
29.56
19.56
TT280 6" standard (each).
33.79
38.11
43.31
40.96
TT284-1 1" extension (each). TT284-2 2" extension (each). TT284-3 3" extension (each). TT284-4 4" extension (each).
18.06 18.72 21.62 33.91
18.72 19.45 22.29 34.93
30.80 32.25 34.31 40.69
20.13 20.88 23.98 37.59
106 (GA shown. Also available as R, GCD & RCD) 1⁄2" pillar sink tap, with raised nozzle (pair).
137.46
144.37
198.69
155.20
As above but RFC style.
204.35
221.00
254.24
237.59
Barwil Pricelist 2010_Layout 1 30/03/2010 2:16pm Page 23
Prices excluding VAT Kitchen Mixers & Taps
Specification
Polished Brass
Chrome /Nickel
Inca/ Satin Chrome/ Weathered Satin Nickel Bronze
2020 (GA shown. Also available as R, GCD & RCD) Wall mounted sink mixer.
255.94
268.74
348.33
288.92
1070 (RFC shown) Monobloc single hole sink mixer. Quarter turn china lever handles and swivel nozzle. For swanneck sizes please refer to dimension page 23
383.50
396.71
464.74
426.74
As above but R, GA, GCD or RCD style.
302.62
314.84
368.85
338.43
23
Barwil Pricelist 2010_Layout 1 30/03/2010 2:16pm Page 24
Prices excluding VAT Mastercraft Fittings
Specification
Polished Brass
Inca/ Satin Chrome/ Weathered Satin Nickel Bronze
MC2134 Mastercraft 3⁄4" bath pillar taps (pair).
N/A
236.94
271.78
254.70
MC2123 Mastercraft 1⁄2" basin pillar taps (pair).
N/A
177.78
223.78
191.12
MC2123
MC2134
MC6450 Mastercraft 3-hole basin mixer with pop-up waste 112mm nozzle.
N/A
435.76
479.00
468.45
MC6455 As above but with 140mm nozzle.
N/A
435.76
479.00
468.45
6451, 6456 With plug and chain waste and chain boss on nose.
N/A
435.76
479.00
468.45
6452, 6457 With plug and chain waste and chain stay.
N/A
435.76
479.00
468.45
MC6450 RFC As MC6450 above but with lever action 57 A/F (21/4”)
24
Chrome /Nickel
SPECIAL ORDER ONLY
57 A/F (21/4”)
MC6470 Mastercraft Monobloc basin mixer with pop-up waste.
N/A
286.65
352.34
308.16
MC1870 Mastercraft Monobloc bidet mixer with pop-up waste.
N/A
320.49
373.14
344.53
Barwil Pricelist 2010_Layout 1 30/03/2010 2:16pm Page 25
Prices excluding VAT Mastercraft Fittings
Specification
Polished Brass
Chrome /Nickel
Inca/ Satin Chrome/ Weathered Satin Nickel Bronze
MC4300 Mastercraft Bath/spray mixer, pillar mounting.
N/A
846.94
1007.91
910.49
MC4308 Mastercraft Bath/spray mixer, wall mounting. (Not illustrated). Incorporates single check valve.
N/A
846.94
1007.91
910.49
MC3300 Bath filler, pillar mounting.
N/A
494.73
597.79
531.82
MC3308 Bath filler, wall mounting. (Not illustrated).
N/A
494.73
597.79
531.82
MC3490 SET Mastercraft 3/4" Bath deck valves and nozzle to form bath filler
N/A
616.65
669.16
662.94
MC3490 DV PR Mastercraft 3/4" Deck Valves
N/A
358.67
393.59
385.56
MC3490 DN Mastercraft 1" Bath Nozzle (8 3/4" proj)
N/A
196.79
214.30
211.55
MC3490 RFC As MC3490 above but with lever action
SPECIAL ORDER ONLY
MC3490DN
MC3490SET
25
Barwil Pricelist 2010_Layout 1 30/03/2010 2:16pm Page 26
Prices excluding VAT Mastercraft Fittings
Specification
Polished Brass
Chrome /Nickel
Inca/ Satin Chrome/ Weathered Satin Nickel Bronze
MC3470 SET Mastercraft Concealed Wall Stops, Nozzle and Tee
N/A
470.69
540.11
505.98
MC3470 WS Mastercraft 3/4" Concealed Wall Stops, Pair
N/A
307.96
353.94
331.04
MC3470 WN Mastercraft 7" Wall Nozzle and B/Nut
N/A
122.47
146.52
131.64
1095.32
998.66
MC3470WN
180 (71/16”)
MC3470 SET
Finished wall surface
MC3470WS
270 (105/8”) as supplied can be reduced to 190 (71/2”) on site
MC3494 SET Mastercraft 4 hole deck set comprising hot & coldvalves, diverter, nozzle and pull-up handspray incorporating single check valve to comply with Water Byelaws MC3494 RFC As MC3494 above but with lever action
26
N/A
928.99
SPECIAL ORDER ONLY
Barwil Pricelist 2010_Layout 1 30/03/2010 2:16pm Page 27
Prices excluding VAT Mastercraft Fittings
Specification
Polished Brass
MC3460 Mastercraft Concealed bath mixer, mounted on panel. This fitting is supplied assembled (as shown) and must not be removed from the plate
Chrome /Nickel
N/A
Inca/ Satin Chrome/ Weathered Satin Nickel Bronze
446.88
576.61
480.38
)
3/ "
1 0(
34
35
200 (8"
MC3460 viewed from rear showing supply connections
MCPS53C Mastercraft recessed thermostatic shower mixer. Octagonal wall plate and lever.
N/A
858.52
951.45
922.93
772.75
851.05
830.72
Important note regarding installation: see page 41
MCPS53 Mastercraft Exposed Thermostatic mixer valve only and inlet bends.
N/A
Important note regarding installation: see page 41
7
27
Barwil Pricelist 2010_Layout 1 30/03/2010 2:16pm Page 28
Prices excluding VAT Mastercraft Fittings
28
Specification
Polished Brass
Chrome /Nickel
Inca/ Satin Chrome/ Weathered Satin Nickel Bronze
MCPS16 Comprises standard 171â „2" shower arm, Mastercraft back inlet and 5" rose. For any variations please order individual components as set out on page 18.
N/A
187.00
221.10
200.98
MC3400 Bath waste, plug, chain and overflow set.
N/A
50.92
83.19
54.77
MC3420/15 Cistern lever handle with 150mm shank. For dimensions see page 20.
N/A
85.33
102.53
91.72
MC3420/25 As above with a 250mm shank.
N/A
103.12
120.19
110.87
MC3420/35 As above but with 350mm shank for concealed cisterns.
N/A
103.12
120.19
110.87
Barwil Pricelist 2010_Layout 1 30/03/2010 2:16pm Page 29
Prices excluding VAT
Q Range Specification
Chrome
289.86
58 (25/16")
65 (29/16")
125 (415/16")
Q2-2124 (pair) Basin pillar tap
HOLE 22 (7/8") 1/ 2"
Q2-2124
B.S.P
102 (4")
Q2-6571 Lift & turn monobloc basin mixer without pop-up waste Also available: Q2-6570 Lift & turn monobloc basin mixer with pop-up waste
171.85
231.89
FLEXIBLE HOSE
147 (53/4") 45 (113/16")
53
(21/8")
66 (23/8")
45 (113/16") MAX
HOLE 34 (111/32")
(113/16")
147 (53/4") 45
53
115 (41/2")
(23/8")
66 (23/8")
115 (41/2")
HOLE 34 (11/32") FLEXIBLE HOSE
Q2-6570
Q2-6571
300 (12") MAX
Q2-6471 Sequential monobloc basin mixer without pop-up waste
171.85
Also available: Q2-6470 Sequential monobloc basin mixer with pop-up waste
231.89
HOLE 34 (111/32") Q2-6471
FLEXIBLE HOSE
147 (53/4") 45
(113/16")
59
(25/16")
72 (213/16")
45 (113/16") MAX
45
147 (53/4")
115 (41/2")
(113/16")
59
(25/16")
115 (41/2")
72 (213/16")
HOLE 34 (11/32") FLEXIBLE HOSE
Q2-6470 300 (12") MAX
Q-64 150mm Extension standard to suit monobloc basin mixers
33.12 42 (15/8")
155 (61/16")
Q Basin Fittings
Q2 64
29
Barwil Pricelist 2010_Layout 1 30/03/2010 2:17pm Page 30
Prices excluding VAT
Q Range Q Basin Fittings
Specification
Chrome
Q-3418W Basin pop-up waste Also available: Q-3411 Basin flip-over waste
39.35
49.69
Q2-6454 3 Hole wall mounted basin filler without pop-up waste
434.78
60 (23/8")
180 (7")
13 (1/2") 3/ 4"
BSP
35 (13/8")
TIMBER STUDWORK
FINISHED WALL SURFACE
HOLE 42 (121/32") Q2-6454
Q2-6455, (140mm nozzle) Q2-6450, (115mm nozzle) 3 Hole basin set with pop-up waste
360.25 360.25
Also available: Q2-6456, (140mm nozzle) Q2-6451, (115mm nozzle) 3 Hole basin set without pop-up waste
HOLE 29 (15/32")
HOLE 29 (15/32") 1/ 2"
1/ 2"
BSP
FLEXIBLE HOSE
66(25/8")
HOLE 29 (15/32")
HOLE 29 (15/32")
BSP 1/ 2"
Q2-6450/6455
45 (113/16")
64(21/2")
46(113/16")
45 (113/16")
308.50 308.50
1/ 2"
BSP
FLEXIBLE HOSE 300 (12") MAX
Q2-6451/6456
115 (41/2") Q2-6450/6451 140 (51/2") Q2-6455/6456 115 (41/2")
25 (1")
3/ 4"
30
BSP
BSP
Barwil Pricelist 2010_Layout 1 30/03/2010 2:17pm Page 31
Prices excluding VAT
Q Range Specification
Chrome
Q2-1870 Sequential monobloc bidet mixer Also available: Q2-1970 Lift & turn monobloc bidet mixer
240.16
240.16
FLEXIBLE HOSE
Q2-1870
147 (53/4")
66 (23/8")
45
HOLE 34 (111/32")
(113/16")
45
HOLE 34 (111/32")
45 (113/16") MAX
147 (53/4")
115 (41/2")
(113/16")
45 (113/16") MAX
72 (213/16")
115 (41/2")
FLEXIBLE HOSE
Q2-1970 300 (12") MAX
300 (12") MAX
Q2-3480L SET Q2 3/4" Concealed 3 hole deck filler 200mm Nozzle (incorporates deck valves, nozzle, tee and connections). Double nozzle outlet.
424.44
Q2-3480S SET Q2 3/4" Concealed 3 hole deck filler 150mm Nozzle (incorporates deck valves, nozzle, tee and connections). Single nozzle outlet.
414.08
3/ 4" BSP
34 (15/16") HOLE
39 (19/16") HOLE
3/ 4" BSP
3/ 4"
BSP
200 (77/8")
208 (83/16")
165 (61/2")
47 MAX (17/8")
165 (61/2")
39 (19/16") HOLE
290 (113/8" ) AS SUPPLIED Q2-3484S SET CAN BE REDUCED TO 210 (81/4" ) ON SITE Q2-3484L SET
125 (5")
SITE
125 (5")
TO 170
(611/16") ON
46 (113/16")
250 (97/8" ) AS SUPPLIED CAN BE REDUCED
46 (113/16" )
Q2-3480S Q2-3480L
165 (61/2" )
47 MAX (17/8")
34 (15/16") HOLE
3/ 4"
34 (15/16") HOLE
BSP
150 (529/32")
150 (529/32") Q2-3484L Long Deck Nozzle Q2-3480L Long Deck Nozzle
Q2-3484S Short Deck Nozzle Q2-3480S Short Deck Nozzle
1" BSP
91 (39/16")
91 (39/16")
Q Bath Fittings
34 (115/16") HOLE 28 (11/8")
34 (15/16") HOLE 1" BSP
28 (11/8")
Q2-3484L SET Q2 3/4" Concealed 3 hole deck filler 200mm Nozzle (incorporates deck valves, nozzle, tee and connections). Double nozzle outlet.
598.35
Q2-3484S SET Q2 3/4" Concealed 3 hole deck filler 150mm Nozzle (incorporates deck valves, nozzle, tee and connections). Single nozzle outlet.
590.07
31
Barwil Pricelist 2010_Layout 1 30/03/2010 2:17pm Page 32
Prices excluding VAT
Q Range Q Bath Fittings
Specification
Chrome
Q2-3450WS PR 3/4" Wall Stop (pair)
304.36 70 (23/4") FINISHED WALL SURFACE
72 (27/8")
63 MIN (21/2") MIN
35 (13/8")
42 (111/16") HOLE REQUIRED
88 MAX (31/2") Q2-3450 WS
Q2-4300 Bath/Spray Mixer
445.14
Also available: Q2-4308 As above for wall mounting to special order
445.14
Q-3425/42 42mm Floorstands and Bracing Bar
513.46
1700 (67") FLEX TO HANDSPRAY
170 (611/16")
35 (13/8")
842 (331/8")
FLEX TO HANDSPRAY
Bracing kit
Floor level
150 (6")
DIA 42 (1.65")
60 (23/8")
60 (23/8") DIA
3/ 4"
B.S.P
180 (71/8") Fixed Centres Q2-4300 Bath/Spray Mixer
32
Outline of Overflow pipe Holes 29 (15/32")
Q2 Floor Mounted 4300 Bath/Spray Mixer Q-3425-42 Floor standards to take Q-4300. Suitable for some baths with ø28mm (11/8") vertical overflow tube. Available special order only
Barwil Pricelist 2010_Layout 1 30/03/2010 2:17pm Page 33
Prices excluding VAT
Q Range Specification
Chrome
Q2-3450S SET Q2 3/4" Concealed 3 hole filler 170mm Nozzle (incorporate wall stops, nozzle, tee and connections). Single nozzle outlet.
436.86
60 (23/8")
29 (15/32")
1 " BSP
443.07
1 " BSP
Q2-3450L SET Q2 3/4" Concealed 3 hole filler 220mm Nozzle (incorporate wall stops, nozzle, tee and connections). Double nozzle outlet.
60 (23/8")
29 (15/32")
170 (611/16") 38 (11/2")
220 (811/16") 38 (11/2") Q2-3450L Long Wall Nozzle
170 (611/16")
Q2-3450S Short Wall Nozzle
(13/8")
35
270 (10 5/8" ) AS SUPPLIED CAN BE REDUCED TO 190 (7 1/2" ) ON SITE TIMBER STUDWORK
197 (73/4") ONE OUTLET 247 (93/4") TWO OUTLET
22mm COMP. FINISHED WALL SURFACE Q2-3450S SET Q2-3450L SET
Q2-2134 (pair) Bath pillar tap
HOLE 42 (111/16")
335.41
101 (4")
160 (61/4")
170 (611/16")
HOLE 29 (15/32") 58 (25/16")
Q Bath Fittings
Q-3408W Bath pop-up waste & overflow set
3/ 4"
B.S.P
103.52
33
Barwil Pricelist 2010_Layout 1 30/03/2010 2:17pm Page 34
Prices excluding VAT
Q Range Q Shower Accessories & Cistern Levers
Specification
Chrome
Q-28821 Slider bar only (Does not include handspray & flex Q-03)
165.64
755 (293/4")
63 (21/2")
Q2-28821
Q-62 1/2" Wall outlet
45.55
Q-03 Handspray & flexible hose
115.94
Cistern lever Q-3420-15: 150mm shank Q-3420-25: 250mm shank Q-3420-35: 350mm shank
70.40 76.61 76.61 BACK BUSH
1/ 7 2" BSP 22 ( /8") HOLE REQUIRED
150 (6")
100 (4")
Q2-3420/15 25 50 (1") (2") MAX
FRONT BUSH
100 (4")
1/ 7 2" BSP 22 ( /8")
HOLE REQUIRED
WALL CAVITY 25 50 (1") (2") 350 (14") MAX (CUT AS REQUIRED)
Q2-3420/35
Q-16SP6 Overhead shower arm & adjustable 6 jet head
3/ 4"
220 (83/4")
85 (33/8")
60 (23/8")
144.92
BSP Q2-16SP6
Q-16 Overhead shower arm & 6" rose Not illustrated: Q-16EC Overhead shower arm & 6" easy clean rose
155.28
186.34
3/ 4"
495 (191/2")
118 (45/8")
60 (23/8")
BSP Q2-16 Q2-16EC 150 (6")
34
Barwil Pricelist 2010_Layout 1 30/03/2010 2:17pm Page 35
Prices excluding VAT
Q Range Q Shower Valves
Specification
Chrome
Q2-53C Thermostatic shower valve with circular backplate
88 MAX (37/16")
229 (9")
FINISHED WALL SURFACE
FACE PLATE
TIMBER STUDWORK
65 MIN (29/16") 25 (1")
604.56
Q2-53C
Q2-53D Thermostatic shower valve with rectangular backplate
809.53
340 (133/8")
100 (4")
140 (51/2")
TIMBER STUDWORK
FINISHED WALL SURFACE
25 88 MAX (37/16") 65 MIN (29/16")
200 (8") Q2-53D1
Q RANGE TAPS & MIXERS 90 80
FLOW RATE (L/MIN)
70 " 3 ⁄4
60
th Ba
50 1 ⁄" 2
40 30
si n Ba
ixers ntial M Seque
20 10
0. 1 (1.47)
1 (14.7)
2 (29.4) 3 (44.1) DYNAMIC PRESSURE BAR (P.S.I)
4 (58.8)
5 (73.5)
35
Barwil Pricelist 2010_Layout 1 30/03/2010 2:17pm Page 36
Spare Parts
36
TT
Prices excluding VAT
GA
R
GCD
RCD
MODEL
SPARE PARTS
PB
CP/NI
IB
SNI
•
•
•
•
TCD
RFC
MC
22
SIDEVALVE + TOPWORKS (BS5412) PAIR
165.83
193.90
215.54
208.42
•
•
•
•
24
HEADWORKS (BS1010) PAIR
109.18
112.41
136.43
120.83
•
•
•
•
25
3/4" HEADWORKS PAIR
116.26
119.37
162.22
128.31
•
•
•
•
24M
HEADWORKS (BS5412) PAIR
109.18
112.41
136.43
120.83
MODEL
SPARE PARTS
PS01
POP UP EXTENSION ROD
18.20
N/A
PS02
HANDSPRAY & ROSE
57.90
60.80
PS03
HANDSPRAY, ROSE & FLEX
PS04
HANDSPRAY,ROSE,FLEX & CRADLE
PB
CP/NI
SNI
MODEL
SPARE PARTS
N/A
N/A
PS36
`O` RINGS FOR SHUTTLE (2)
91.36
65.37
PS37
DIV HANDLE,CRANK,SPINDLE 4300
IB
PB
CP/NI
IB
SNI
0.50
N/A
N/A
N/A
90.11
92.81
101.27
99.79
83.88
86.49
150.83
92.98
PS38
3/4" HEX NUT C/W CONE
18.20
18.77
21.86
20.17
165.26
170.35
234.19
183.13
PS39
3/4" HEX NUT C/W RINGS
18.20
18.77
21.86
20.17
PS05
FLEXIBLE HOSE 1.5M
24.92
25.67
58.67
27.59
PS40A
3/4" BACKPLATE ELBOW 5600
89.63
92.43
101.30
99.36
PS06
CHINA SLEEVE (4300 DIV.)
18.20
N/A
N/A
N/A
PS40C
3/4" BACKPLATE ELBOW 4301
89.63
92.43
101.30
99.36
PS07
CHINA SLEEVE (4300 HANDSPRAY)
18.20
N/A
N/A
N/A
PS40D
3/4" BACKPLATE ELBOW 4002
89.63
92.43
101.30
99.36
PS08
CHINA SLEEVE (3420 CISTERN)
18.20
N/A
N/A
N/A
PS41
3/4" BACK INLET (CONC SUPPLY)
68.33
82.03
89.68
88.18
PS08B
CHINA SLEEVE (RFC & THERMO)
18.20
N/A
N/A
N/A
PS42
HANDSPRAY & JET (1040)
57.90
60.80
91.36
65.37
PS09
2.1/2" HANDSPRAY ROSE
21.10
22.24
36.93
23.91
PS45
SHOWER ROSE 10" DIA
127.54
140.61
187.74
151.17
147.84
164.47
218.41
176.83
80.17
82.62
108.95
88.84
PS1/2-12
1/2" WALL UNIONS COMP.(5600)PR
123.24
126.95
147.22
136.46
PS46
SHOWER ROSE 12" DIA
PS1/2-12CU
COPPER UNIONS FOR THERMO PAIR
123.24
126.95
147.22
136.46
PS47
9" ROUND PLATE+SCREWS FOR PS53C (BARWIL)
PS1/2-13
1/2" PILLAR UNIONS COMPLETE PR
123.24
126.95
147.22
136.46
PS47B
7" PLATE + SCREWS FOR 3450WD (RACE LINE)
80.17
82.62
108.95
88.84
PS1/2-13LT
1/2" LONG TAIL PILLARS COMP.PR (1010)
149.64
153.37
173.59
164.86
PS47C1
RECTANGULAR PLATE FOR PS53C1 (BARWIL)
126.95
153.23
169.11
164.72
PS1/2-13M
1/2" MUSHROOM UNIONS COMP.PAIR
123.24
126.95
147.22
136.46
PS47C2
RECT.PLATE & SCREWS FOR PS53C2 (BARWIL)
137.81
174.76
202.56
187.86
PS1/2-51
CERAM.DSC H/WK NO CAP (BS1010) PAIR
45.28
N/A
N/A
N/A
PS47SQ
8" SQUARE PLATE+SCREWS FOR PS53CSQ(BW)
82.10
84.70
111.66
91.05
PS1/2-51M
CERAM.DSC H/WK NO CAP (BS5412) PAIR
45.28
N/A
N/A
N/A
PS48
RISER KIT COMPLETE FOR 4301
249.83
281.19
330.33
302.27
PS10
SHOWER ROSE 5" DIA
39.16
44.91
63.02
48.29
PS48A
RISER KIT COMPLETE FOR 4302
249.83
281.19
330.33
302.27
PS11
4300 DIV.HANDLE & CRANK ONLY
56.70
58.43
67.76
62.87
PS49
RISER KIT COMPLETE 5600
236.15
248.00
292.29
266.60
PS11A
5600 GUM. DIVERTOR HANDLE COMPLETE
56.70
58.43
67.76
62.87
PS49A
RISER KIT COMPLETE FOR 5300
236.15
248.00
292.29
266.60
PS14C
BARWIL CHINA INDICES PAIR
PS16
17 1/2" S/ARM, 5" ROSE+B/INLET
PS21
POP UP WASTE ASSEMBLY COMPLETE
PS27
SAVOY DIV.+CHK VALVE COMPLETE
PS28
SAVOY SINGLE CHECK VALVE
PS29L
SHOWER ARM ONLY 24" (3/4" OUTLET)
4.95
N/A
N/A
N/A
PS50
WALL MOUNTED CRADLE
50.19
50.33
62.92
54.10
149.23
170.01
200.97
182.73
PS52
CERAM.DSC H/WK NO LVR*RFC*PAIR (BS1010)
45.28
N/A
N/A
N/A
34.73
42.02
45.43
42.99
PS52F
CERAM.DSC H/WK NO LVR*RFC*PAIR (RFC1070)
45.28
N/A
N/A
N/A
N/A
102.86
128.58
110.56
PS52M
CERAM.DSC H/WK NO LVR*RFC*PAIR (BS5412)
45.28
N/A
N/A
N/A
N/A
44.27
55.39
47.57
PS53
THERMO VALVE + INLET BENDS
681.42
702.52
773.72
755.20
47.57
50.42
57.04
54.20
PS53BA
THERMO VALVE, FLOW VALVE + BATH NOZZLE
881.11
907.49
1026.25
975.57
PS29S
SHOWER ARM ONLY 17.1/2" (3/4" OUTLET)
41.75
43.04
48.29
46.26
PS53C
CONC.THERMO VALVE + 9" ROUND PLATE
757.12
780.46
864.98
839.01
PS3/4-12
3/4" WALL UNIONS COMPLETE PAIR"
157.85
162.55
188.45
174.74
PS53C1
CONC.THERMO VALVE, F.V+RECT.PLATE
995.81
1026.65
1152.54
1103.64
PS3/4-13
3/4" PILLAR UNIONS COMP. PAIR
157.85
162.55
188.45
174.74
PS53C1-CD
CONC.THERM VALVE, 3QT F.V+RECT.PLATE(BW)
995.81
1026.65
1152.54
1103.64
PS3/4-13EXT
3/4" EXT.PILLAR UNIONS COMP.PR
157.85
162.55
188.45
174.74
PS53C2
CONC.THERMO VALVE,2xF.V+RECT.PLATE
1234.73
1272.92
1419.64
1368.38
PS3/4-51
CERAMIC DISC HEADWORKS (3/4”) PAIR
45.28
N/A
N/A
N/A
PS53C2-CD
CONC.THERMO VALVE,2x3QT F.V+RECT.PLATE
1234.73
1272.92
1419.64
1368.38
PS30L
RISER PIPE C/W NUTS LONG 4301/4302
79.27
100.87
117.72
108.40
PS53C3
CONC.THERMO VALVE,3xF.V+RECT.PLATE
1440.57
1483.78
1679.24
1595.07
PS30S
RISER PIPE C/W NUTS SHORT 5300/5600
65.61
67.65
79.68
72.73
PS53CSQ
CONC.THERMO VALVE + 8" SQUARE PLATE
808.71
833.78
925.33
896.33
PS32
1.1/4" POP UP PLUG COMPLETE
18.20
18.77
21.86
20.18
PS54
CRADLE COMPLETE (4300)
81.04
83.98
107.43
90.29
PS32A
1.1/2" POP UP PLUG ONLY
18.20
18.77
21.86
20.18
PS55
P TRAP,WSTE,PLG,CHN,TBE,FLANGE
506.47
545.83
615.80
586.79
PS33
PULL ROD & KNOB ROUND
32.05
33.07
49.54
35.55
PS56
42mm ELBOW
92.71
96.21
101.48
103.45
PS33A
POP UP ROD CONNECTOR
3.68
N/A
N/A
N/A
PS56/2
303 1.1/2Fx42mm C STRAIGHT 4 WSTE
92.71
96.21
101.48
103.45
PS35
SHUTTLE FOR 4300
3.49
N/A
N/A
N/A
PS56A
42mm COMPRESSION NUT ONLY
14.97
16.24
19.99
17.48
Barwil Pricelist 2010_Layout 1 30/03/2010 2:17pm Page 37
Prices excluding VAT
MODEL
SPARE PARTS
PS56B
42mm COMPRESSION OLIVE ONLY
PS56C
1.1/2" BSPFx42mm (TUBE) STRAIGHT COUPLER
PS56D
42mm ELBOW C/W 42mm TUBE FXD (drg pt.3)
PS56E
42mm x 42mm x 28mm TEE (drg pt.3a)
PB
CP/NI
IB
SNI
MODEL
SPARE PARTS
PB
CP/NI
IB
SNI
5.07
N/A
N/A
N/A
PS80
SHOWER ARM 800mm STRAIGHT (3/4" BSP OUT.)
47.57
50.42
57.04
54.20
92.71
96.21
101.48
103.45
PS80A
SHOWER ARM 800mm STRAIGHT (1/2" BSP OUT.)
47.57
50.42
57.04
54.20
92.71
96.21
101.48
103.45
PS81
1.1/2" PLUG, CHAIN & TRIANGLES
18.20
18.77
21.86
20.17
139.08
144.33
152.22
155.16
PS81A
1.1/4" PLUG, CHAIN & TRIANGLES
18.20
18.77
21.86
20.17 81.17
PS57
42mm TUBE (PER 300mm)
45.50
59.52
80.47
63.94
PS82H
6454 8" WALL NOZZLE & AERATOR
73.28
75.51
90.53
PS57A
FLANGE TO SUIT 42mm TUBE
33.24
36.75
41.98
39.49
PS83
O’RING FOR BATH PLUG
0.36
N/A
N/A
N/A
PS58
BOTHWELL FUNNEL
18.20
19.11
22.67
20.55
PS83A
O’RING FOR BASIN PLUG
0.36
N/A
N/A
N/A
PS59A
SHWR ARM 17 1/2" 45 DEG/B (1/2" BSP OUT)
41.75
43.03
48.31
46.24
PS85
3400 OVERFLOW BEND,NUT & CONE
56.50
58.31
61.83
62.66
PS59L
SHOWER ARM 24" (1/2" BSP OUTLET)
47.57
50.40
57.04
54.20
PS85A
3400 OVERFLOW BEND EXT.THD, NUT&CNE
188.63
190.44
193.96
204.71
PS59S
SHOWER ARM 17 1/2”“ (1/2" BSP OUTLET)
41.75
43.03
48.31
46.24
PS85B
3400 OVERFLOW FRONT ONLY
20.13
20.72
21.34
22.26
PS60
BALL JOINT ONLY (1/2" BSP)
27.33
28.14
32.77
30.24
PS86
1/2" Mx1/2" M OUT.ADAP(MEY.6003)
18.86
19.84
29.56
21.33
PS61
SHOWER ROSE 4" SKIRTED (1/2" BSP INLET)
39.16
44.91
63.02
48.29
PS86A
3/4" Fx1/2" M OUTLET ADAP.(4300)
18.86
19.84
29.56
21.33
PS61A
SHOWER ROSE 4" SKIRTED (3/4" BSP INLET)
39.16
44.91
63.02
48.29
PS86B
1/2" Mx3/4" M OUTLET (MEYN.5600)
18.86
19.84
29.56
21.33
PS62
BENT WALL OUTLET FOR FLEX
33.90
34.93
43.77
37.59
PS86C
3/4" Mx3/4" M OUTLET ADAP.(5300)
18.86
19.84
29.56
21.33
PS63
SHOWER ARM GAS MANTEL 17.1/2" (3/4" OUT.)
115.89
119.47
124.78
128.40
PS88
HOLDER BAT AND SCREWS
27.52
30.49
31.35
32.75
PS6450
3H BASIN MXR 4" NOZZLE ASSY
150.24
154.75
167.75
166.36
PS89
3/4" Mx1/2" M+CHK.OUTLET(GUM.6003)
26.53
27.33
34.83
29.38
PS6455
3H BASIN MXR 5" NOZZLE ASSY
150.24
154.75
167.75
166.36
PS89A
3/4" Mx3/4" M OUTLET(GUM.5600)
18.86
19.84
29.56
21.33
PS65A
RISER KIT COMP. C/W 4" SWIVEL ROSE 5600
277.11
309.35
363.12
332.56
PS89B
3/4" Mx1/2" F OUTLET(GUM.5600DV)
18.86
19.84
29.56
21.33
PS65B
RISER KIT COMP. C/W 4" SWIVEL ROSE 5300
277.11
309.35
363.12
332.56
PS90
20mm NOZZLE OUTLET (UN-POL.B)
2.83
N/A
N/A
N/A
PS65C
RISER KIT COMP. C/W 4" SWIVEL ROSE 4301
263.47
276.18
325.10
296.90
PS92
SAVOY CRADLE ONLY
N/A
83.98
107.43
90.29
PS65D
RISER KIT COMP. C/W 4" SWIVEL ROSE 4302
263.47
276.18
325.10
296.90
PS93
1.1/4" BOTTLE TRAP,TUBE & FLGE
65.29
81.74
91.41
87.87
PS66
17 1/2" S/ARM,4" ROSE,B/JNT,B/INLET
176.55
198.38
233.79
213.28
PS96
1" SPACER 6450 NOZZLE
76.30
79.08
91.79
85.02
PS68
45mm SLIDING FLANGE FOR 15mm TUBE
16.02
16.51
21.83
17.75
SK-GA/R1010
SEAL KIT FOR GA/R1010
9.74
N/A
N/A
N/A
PS69
50mm SLIDING FLANGE FOR 22mm TUBE
16.02
16.51
21.83
17.75
SK-GA/R1040
SEAL KIT FOR GA/R1040 INC.AUTO DIV.ASSBY
103.48
N/A
N/A
N/A
PS70
FLEXIBLE HOSE C/W ELBOW (6450) EACH
25.22
N/A
N/A
N/A
SK-GA/R1070
SEAL KIT FOR GA/R1070
10.62
N/A
N/A
N/A
PS71
SWIVEL NUT ONLY (1010/70 S/NECK)
19.54
20.13
22.52
21.65
SK-GA/R1870
SEAL KIT FOR GA/R1870 INC.AERATOR
6.92
N/A
N/A
N/A
PS72
FLEXIBLE HOSE 300mm x 1/2" BSPF x 10mm
25.22
N/A
N/A
N/A
SK-GA/R2123
SEAL KIT FOR GA/R2123/24/25 (PRS)
2.60
N/A
N/A
N/A
PS73
SHOWER ARM 800mm STRAIGHT, 5" ROSE,B/INLET
133.28
176.95
228.73
190.24
SK-GA/R2134
SEAL KIT FOR GA/R2134 (PRS)
2.60
N/A
N/A
N/A N/A
PS74
4" SWANNECK COMPLETE (1010/1070)
73.28
75.51
90.53
81.17
SK-GA/R3300
SEAL KIT FOR GA/R3300
PS74A
6" SWANNECK COMPLETE (1010/1070)
73.28
75.51
90.53
81.17
SK-GA/R4300
SEAL KIT FOR GA/R4300/8 INCL. SHUTTLE
PS74B
8" SWANNECK COMPLETE (1010/1070)
73.28
75.51
90.53
81.17
SK-GA/R6450
PS74C
10" SWANNECK COMP.SQUARE TYPE (1010/70)
92.01
94.02
114.74
101.06
3.02
N/A
N/A
18.66
N/A
N/A
N/A
SEAL KIT FOR GA/R6450/55
7.03
N/A
N/A
N/A
SK-GA/R6454
SEAL KIT FOR GA/R6454
9.74
N/A
N/A
N/A
PS74D
12" SWANNECK COMP.SQUARE TYPE (1010/70)
97.94
100.94
120.85
108.50
SK-GA/R6470
SEAL KIT FOR GA/R6470/71/75/76
6.49
N/A
N/A
N/A
PS74E
8" SWANNECK COMPLETE (1030/1040)
73.28
75.51
90.53
81.17
SK-RFC1010
SEAL KIT FOR RFC1010 (NOT INC.T/WKS)
6.31
N/A
N/A
N/A
PS76
1" BSP HEX NUT
12.93
13.37
13.66
14.38
SK-SWANNECK SEAL KIT FOR SWANNECK
2.17
N/A
N/A
N/A
PS78
GOOSENECK RISER C/W NUT
133.13
137.27
159.15
147.53
SKBW4750-1
GUMMER THERMO: SEAL KIT SKBW4750-1
19.53
N/A
N/A
N/A
PS79
1/2" OFFSET TAIL PLATE
9.86
10.27
15.61
11.05
SKBW4750-2
GUMMER THERMO: CARTRIDGE SKBW4750-2
78.01
N/A
N/A
N/A
PS79A
3/4" OFFSET TAIL PLATE
13.28
13.78
19.11
14.83
PK1
GUMMER THERMO: PACKING KIT
17.96
N/A
N/A
N/A
37
Barwil Pricelist 2010_Layout 1 30/03/2010 2:17pm Page 38
Spare Parts (Mastercraft) GA
R
GCD RCD
TT
TCD RFC
MC
MODEL
MASTERCRAFT SPARE PARTS
PB
CP/NI
IB
SNI
•
22
M/CRAFT SIDEVALVE+TOPWORKS (BS5412) PAIR
N/A
242.39
269.42
260.54
•
24
M/CRAFT HEADWORKS (BS1010) PAIR
N/A
140.50
170.54
151.04
•
24M
M/CRAFT HEADWORKS (BS5412) PAIR
N/A
140.50
170.54
151.04
•
25
M/CRAFT 3/4" HEADWORKS PAIR
N/A
149.20
202.78
160.36
MODEL
SPARE PARTS
PB
CP/NI
IB
SNI
MCPS02
M/CRAFT HANDSPRAY & HEX.ROSE
N/A
66.77
100.51
71.76
MCPS03
M/CRAFT HANDSPRAY, HEX.ROSE & FLEX
N/A
95.00
139.41
102.14
MCPS04
M/CRAFT H/SPRY,HEX.ROSE,FLEX,CRAD
N/A
187.38
257.57
201.40
MCPS1/2-12
M/CRAFT 1/2" WALL UNIONS COMP.(5600) PR
N/A
139.62
161.92
150.10
MCPS11A
M/CRAFT 5600 GUM. DIV.HANDLE COMPLETE
N/A
64.30
74.52
69.14
MCPS12
M/CRAFT 3/4" WALL UNIONS COMP.
N/A
178.81
207.34
192.20
MCPS13
M/CRAFT 3/4" PILLAR UNIONS COMP.PAIR
N/A
178.81
207.34
192.20
MCPS13EXT
M/CRAFT 3/4"EXT.PILLAR UNIONS COMP.PAIR
N/A
178.81
207.34
192.20
MCPS14C
M/CRAFT INDICES (BW)CHINA PAIR
4.95
N/A
N/A
N/A 200.98
MCPS16
M/CRAFT B/INLET,17 1/2" SHWR ARM,5" ROSE
N/A
187.00
221.10
MCPS33
M/CRAFT PULL ROD & KNOB HEX
N/A
47.70
63.60
51.27
MCPS37
M/CRAFT DIV HANDLE, CRANK, SPNDLE MC4300
N/A
102.10
111.37
109.76
MCPS41
M/CRAFT 3/4" BACK INLET CONC.SUPPLY
N/A
90.24
98.63
96.99
MCPS47
M/CRAFT 8" OCT.PLATE+SCREWS PS53C(BW)
N/A
103.27
136.18
110.99
MCPS47B
M/CRAFT 7" OCT.PLATE+SCREWS MC3470WD(BW)
N/A
103.27
136.18
110.99
MCPS50
M/CRAFT WALL MOUNTED CRADLE
N/A
55.37
69.21
59.53
MCPS53
M/CRAFT THERMO VALVE + INLET BENDS
N/A
772.75
851.05
830.72
MCPS53C
M/CRAFT CONC.THERM VLVE+8" OCT.PLATE(BW)
N/A
858.52
951.45
922.93
MCPS53C1
M/CRAFT CONC.THERMO,F.V+RECT.PLATE (BW)
N/A
1129.36
1267.80
1214.04
MCPS53C2
M/C CONC THERM VLVE, 2xF.V+RCT.PLTE(BW)
N/A
1400.23
1561.61
1505.23
MCPS54
M/CRAFT CRADLE COMPLETE (4300)
N/A
92.36
118.19
99.32
MCPS62
M/CRAFT BENT WALL OUTLET FOR FLEX
N/A
38.45
48.13
41.35
MCPS82
M/CRAFT 6455 NOZZLE C/W TUBE
N/A
68.93
86.21
74.11
MCPS82A
M/CRAFT 6450 NOZZLE C/W TUBE
N/A
68.93
86.21
74.11
Prices and specifications Prices and specifications are subject to change without notice. All prices quoted are correct at the time of going to press. Finishes We aim to offer quick delivery of orders for polished brass, chrome and nickel finishes. Orders for inca, satin and weathered finishes may take a little longer.
38
Prices excluding VAT
Quality All Barber Wilson bathroom products are produced to the highest quality standards and electroplated to British Standards: Chrome to BS1224. In addition, most fittings are tested by the WRc Evaluation & Testing Centre to ensure full compliance with current water bylaws. All products incorporating hand-held showers are fitted with backflow prevention devices to comply with these laws.
Guarantee We will make good, free of charge, by repair or at our option by replacement, any goods with defects becoming evident within a period of 12 months of purchase and arising from defects which are attributable to us as manufacturers. We cannot be held responsible for any costs incurred in correcting installation related faults, nor problems with electroplated and polished finishes when our cleaning instructions are not adhered to.
Barwil Pricelist 2010_Layout 1 30/03/2010 2:17pm Page 39
Index STYLE PREFIX
PS PS Q PS PS PS MCPS Q Q Q PS PS PS MCPS PS PS PS PS PS GA PS PS PS PS PS PS PS PS MCPS MCPS Q2 Q2 PS PS PS PS PS PS PS PS Q Q TT MC PS PS PS GA RFC GA TT TT TT TT TT TT TT GA GA RFC RFC RFC GA RFC GA
In product code number order PRODUCT CODE NO.
O2 O3 O3 O5 10 16 16 16 16 16 29 29 41 41 44 45 46 50 53 53 53 53 53 53 53 53 53 53 53 53 53 53 53 55 56 57 57 60 61 62 62 64 67 67 73 80 80 106 260 260 280 282 284 284 284 284 679 900 1010 1010 1010 1030 1040 1070 1070
SUFFIX
SP6 EC S L
BA C CSQ C1 C1-CD C2 C2-CD C3 C3-CD C C D CU
A
S KIT S KIT
A
1 2 3 4 2
PAGE NO.
STYLE PREFIX
PRODUCT CODE NO.
19 19 34 19 18 17 28 34 34 34 18 18 18 18 18 18 18 18 11 12 15 15 16 16 16 16 16 16 27 27 35 35 12 7 7 7 7 19 19 19 34 29 19 19 18 18 18 22 22 22 22 22 22 22 22 22 7 4 21 21 21 22 21 23 23
TT GA MC Q2 GA Q2 GA GA GA RFC GA MC GA Q2 GA GA MC Q2 MC GA GA MC TT TT TT TT MC TT TT TT TT Q Q TT TT TT MC MC MC Q Q Q TT TT TT Q TT TT TT TT TT TT Q2 Q2 Q2 TT MC MC MC MC GA GA TT Q2 Q2
1250 1870 1870 1870 1875 1970 2010 2010 2015 2015 2123 2123 2124 2124 2125 2134 2134 2134 3300 3308 3308 3308 3400 3400 3400 3400 3400 3408 3408 3408 3410 3411 3418 3420 3420 3420 3420 3420 3420 3420 3420 3420 3425 3425 3425 3425 3430 3435 3450 3450 3450 3450 3450 3450 3450 3452 3460 3470 3470 3470 3480 3480 3480 3480 3480
SUFFIX
WS
T EXP DP
W W EXT W XXL
W 15 25 35 15 25 35 15 25 35 42mm 2 1 42
SET WS WN WD WS L SET S SET SET SET WS WN SET DV DN L SET S SET
PAGE NO.
8 3 24 31 3 31 21 23 21 21 1 24 1 29 1 4 24 33 25 5 5 25 6 6 6 20 28 20 20 20 20 30 30 20 20 20 28 28 28 34 34 34 7 7 7 32 19 20 8 8 8 9 32 33 33 8 27 26 26 26 5 5 5 31 31
STYLE PREFIX
GA Q2 Q2 MC MC MC MC GA MC Q2 GA GA GA GA MC Q2 GA GA GA GA GA TT MC GA GA GA GA GA GA GA GA TT TT GA GA MC Q2 GA Q2 GA GA GA Q2 GA MC Q2 GA Q2 GA GA GA MC Q2 GA Q2 GA GA GA Q2 Q2 TT Q TT
PRODUCT CODE NO.
SUFFIX
PAGE NO.
3484 3484 3484 3490 3490 3490 3494 4300 4300 4300 4301 4302 4306 4306 4308 4308 4309 4310 4311 4312 5300 5600 5600 5700 5700 5702 5702 5704 5704 6000 6001 6002 6003 6008 6450 6450 6450 6451 6451 6452 6453 6454 6454 6455 6455 6455 6456 6456 6457 6459 6470 6470 6470 6471 6471 6472 6475 6476 6570 6571 28821 28821 61600
SET L SET S SET SET DV DN SET
6 31 31 25 25 25 26 4 25 32 10 10 9 9 25 32 6 6 6 6 11 14 14 13 14 13 14 13 14 11 17 15 15 3 2 24 30 2 30 2 2 2 30 2 24 30 2 30 2 3 1 24 29 1 29 1 1 1 29 29 17 34 19
RT RT RT RT
BA BA BA
BW
39
Barwil Pricelist 2010_Layout 1 30/03/2010 2:17pm Page 40
Current listings include: Model Number
Certificate Number
IRN Number
Water Byelaws
GA or R 2123, 2124, 106
0307050
001, 005
N/A
GA or R 2134
0307051
001, 005
N/A
0607049 + 0607050
109, 112
16, 18
GCD/RCD/GA/MC 4300 or R 4300, 4308 GA or R 3300, 3308
9812050
101, 109
25, 16, 18
GA or R 1870
0603022
001, 140
19, 20, 21
GA or R 6450, 6455
0603023
101
25
GA or R 6475
0603020
101
25
MC 6470
9105006
101
25
MC 1870
9105016
140
19, 20, 21
GA or R 1070AE Single Flow Swanneck
0603017
101
N/A
GA or R 1070 Duoflow Swanneck
9402004
000
N/A
MC 3460
9002008
101, 109, 111
25, 16, 18, 29, 58, 73
MC 3300, 3308
9002009
101,109
25, 16, 18
MC 4300, 4308
0607049
109, 112
16, 18
MC 2123
9002014
000
N/A
MC 2134
9002015
000
N/A
5600, 5651 Valves
0210040
001, 103,111
17, 29, 58, 73
GA or R 1010AE, 2010AE, 2015AE Single Flow Swanneck
0202028
001, 006
N/A
RFC 1010AE Single Flow Swanneck
0202028
001, 006
N/A
RFC 1070
0603018
101
N/A
GCD RCD 1070
0603019
101
N/A
MC 4308 GCD/RCD/GA/R 4308
0607050
109, 112
16, 18
GCD/RCD 6475
0603021
101
25
GA or R1070
0603017
Conversion tables Imperial Foot Head
40
Conventional screwdown tap in section
Metric
P.S.I.
Metre Head
Bar
Litres
Gallons
10
4.33
3.05
0.30
1
0.22
15
6.51
4.57
0.45
2
0.44
20
8.70
6.10
0.60
3
0.66
25
10.85
7.62
0.75
4
0.88
30
13.00
9.15
0.90
4.55
1.00
35
15.17
10.67
1.05
5
1.10
40
17.34
12.20
1.20
6
1.32
45
19.50
13.72
1.35
7
1.54
50
21.67
15.25
1.50
8
1.76
55
23.84
16.77
1.65
9
1.98
60
26.01
18.30
1.80
10
2.20
65
29.17
19.82
1.95
15
3.30
70
30.34
21.53
2.10
20
4.40
75
32.51
22.87
2.25
25
5.50
80
34.68
24.40
2.40
30
6.60
90
39.01
27.45
2.70
35
7.70
100
43.35
30.50
3.00
40
8.80
110
47.65
33.55
3.30
45
9.90
120
52.02
36.60
3.60
50
11.00
130
56.35
39.65
3.90
55
12.10
140
60.68
42.70
4.20
60
13.20
150
65.02
45.75
4.50
65
14.30
160
69.35
48.80
4.80
70
15.40
170
73.79
52.03
5.10
75
16.50
180
78.03
54.90
5.40
80
17.60
1 2 3 4 5 5a 6 7 8 9 10
Capstan Head (handle) Body Shield Cover (head) Jumper Jumper Washer Spindle Packing (gland) Nut Backnut (flynut) Gland Packing ‘O’ Ring Seal
Ceramic disc headwork in section A B C1 C2 D E F G H J K L
Set Screw Shield Sleeve Spring Joint face to tap body Bronze Clip Nitrile ‘O’ Ring Seal Mobile Upper Ceramic Disc Fixed Lower Ceramic Disc Stainless Steel Ring Silicone Compression Washer Lever Handle
Barwil Pricelist 2010_Layout 1 30/03/2010 2:17pm Page 41
GENERAL - to preserve the high quality finish, rinse after use with clean water using a soft cloth and dry with a soft chamois leather or a towel. NEVER - use any form of abrasive. This type of cleaner/material is not necessary if the product is cleaned regularly in accordance with the above instructions, as they will definitely cause surface damage to all finishes. Most surfaces are relatively immune to attack from casual contact with the chemicals found in household cleaners (but avoid prolonged contact). Such cleaners should be rinsed off if necessary, avoid rubbing. N.B. The use of proprietary chrome, nickel and gold cleaners/polishes should not be necessary, but in any event should only be used in strict accordance with the manufacturers instructions. The only marks that can be difficult to remove with a damp cloth are water stains, which can appear in hard water areas. These marks are limescale, which must be dissolved not rubbed away. Watch out particularly around the base of taps and back of mixers for any build up of limescale. A word of caution: limescale is chemically the same as marble and the cleaner designed for its removal may also dissolve marble surfaces. Alkaline soap residues, if left to dry on, will attack all plated surfaces and again must be rinsed away (not rubbed). Proprietary limescale removers may be used but only strictly in accordance with manufacturers instructions.
CHROME & NICKEL The hardest of the decorative finishes, but we still recommend that you avoid scouring powders and abrasives. Chrome resists most chemicals but watch out for any form of hydrochloric acid such as proprietary liquid cleaner for dentures - it will dissolve the chrome in half an hour. Wipe products dry with a soft cloth after cleaning.
Conversion scale only
Care of decorative finishes
GOLD PLATED (INCA) FINISHES Although the softest of the decorative finishes, it is perfectly durable with care and is resistant to chemical attack. Dissolve any water stains at the first sign using proprietary limescale removers (following the manufacturers instructions). Pay particular attention to the softness of the cloth you use to towel the gold products dry after cleaning. SATIN (VELOS) FINISHES These finishes are available in chrome, inca and nickel. Care as for bright finishes. COLOURS Harder than gold, but less hard than chrome. Resistant to chemicals, but beware of nail varnish remover which will soften most finishes of this nature. Generally care for colours like gold. WEATHERED BRONZE This finish is produced by first electroplating with copper. Items are then chemically aged. Copper highlights will develop in use, due to handling and cleaning as recommended. Cleaning must follow the recommendations for all other decorative finishes as above. POLISHED BRASS FINISH We also supply fittings in natural polished brass. This is not lacquered or electroplated and will tarnish quickly and naturally. To maintain the polished finish metal polish should be used.
IMPORTANT NOTE REGARDING INSTALLATION It is essential that thermostatic valves are installed giving full access for servicing. Where a suitable face plate is provided for finishing it should be affixed to the wall with a thin bead of silicone sealant. Under no circumstances should valves be plastered in, tiled in or otherwise entombed. If practical, rear access should be provided. Failure to follow these instructions could nullify any warranty, and could result in damage to tiled or decorative finishes. It is essential that pipe lines are flushed before fitting.
OTHER BARBER WILSONS PRODUCTS We hope you enjoyed browsing through this catalogue but please be aware that the items shown are standard production lines. We do, however, manufacture many items to bespoke designs tailored to meet a client’s specific needs and preferences. If you don’t see what you want then please do contact our sales office on 020 8888 3461 to discuss your requirements.
41
Barwil Pricelist 2010_Layout 1 30/03/2010 2:16pm Page bc36
TRAD
Barber Wilsons & Co Ltd Crawley Road, Wood Green, London N22 6AH Tel +44 (0)208 888 3461 Fax +44 (0)208 888 2041 Email sales@barwil.co.uk www.barwil.co.uk
B RO C H AND