Catalogo csi i gb

Luna Platinum CSI-i

Integrated hybrid systems with inverter air to water monobloc heat pump

Integrated hybrid systems Baxi, since long market leader in heating and home comfort systems, has widened its offer proposing integrated hybrid systems which combine heating technologies and energy sources to provide energy efficient complete integrated systems.

Baxi’s proposal of integrated hybrid systems is now enhanced by new solutions to grant high energy efficiency and low pollutant emissions compared to the best solutions present on the market (with comparable performances).

The new system Luna Platinum CSI-i has been developed to integrate various technologies (solar system, water/air heat pump, gas condensing boiler) with water production for heating, DHW and cooling during the summer.

Why choosing an integrated hybrid system?

1. maximum efficiency in primary energy (lower consumption and lower pollutant emissions)

4. lower aesthetic impact and lower noise: the external unit of the heat pump has been sized according to base loads (single fan model).

2. maximum energy cost savings: the integrated system works with renewable energies (solar, outside air)

5. installation flexibility: two sizes (6-10 kW) of heat pumps and highest modulation rate (3,3 - 33 kW) for condensing boiler, to meet all installation needs in new and existing buildings.

Moreover, the system can be installed even though it is not possible to have the solar collectors on the roof (existing buildings).

3. maximum comfort always granted: in case of unfavourable outside weather conditions, the condensing gas boiler works when the renewable energies do not supply the heat demanded.

The maximum comfort (DHW production, heating and cooling) is always ensured throughout the year and in the most efficient way.

2

6. best rank under Energy Performance of the building

7. lower environmental impact

Luna Platinum CSI-i Luna Platinum CSI-i To meet different installation needs Luna Platinum CSI-i has been developed in 3 configurations: • Luna Platinum CSI-i 1HT+2 LT, solar management • Luna Platinum CSI-i 1 HT+ 1 LT, solar management • Luna Platinum CSI-i 2 LT, solar management

Features • Inverter air to water monobloc heat pump • Circulating pump Erp Ready Class A (reduced consumption) • GAC ( Gas Adaptive Control) automatic combustion control • Wide modulation ratio 1:10 higher efficiency and noiseless • Power set: heating power output set according to design data • 300 litres stainless steel puffer tank with graphite insulation • Integrated electronics and hydraulic group to manage a solar thermal system also in heating mode (only version with solar group) • Integrated electronics and hydraulic group to manage mixed systems for climate regulation in summer and in winter (in the different configurations)

27

70 °C

27 litres/min

*the performance is referred to the following use conditions: cold water inlet temperature 10°C, puffer set point (upper part) 70°C

Tap water at 40°C in 20 min*

Puffer CSI

16

lt/min

lt/min

40 °C

DHW for users

10 °C Mains water

Timing (min)

20’

Luna Platinum CSI-i 633 (1 HT + 2 NT / 1 HT + 1 NT / 2 NT) Gas condensing boilers (Luna Platinum 33) Maximum DHW heat input Maximum heating heat input Range of DHW heat output Range of heating heat output Energetic efficiency (92/42/CEE) DHW production ∆T 30°C Dimensions h x w x d

kW kW kW kW lt/min mm

34 28,9 3,3-33 3,3-28 HHHH 27 2060x868x672

Inverter air to water monobloc heat pump (PBM-i 6) Nominal heating capacity ¹ kW 5,80 COP ¹ 4,30 Nominal cooling output ² kW 4,45 EER ² 4,28 Dimensions hxwxd mm 658x825x300

Luna Platinum CSI-i 1033 (1 HT + 2 NT / 1 HT + 1 NT / 2 NT) Gas condensing boilers (Luna Platinum 33) Maximum DHW heat input Maximum heating heat input Range of DHW heat output Range of heating heat output Energetic efficiency (92/42/CEE) DHW production ∆T 30°C Dimensions h x w x d

kW kW kW kW lt/min mm

34 28,9 3,3-33 3,3-28 HHHH 27 2060x868x672

Inverter air to water monobloc heat pump (PBM-i 10) Nominal heating capacity ¹ kW 9,55 COP ¹ 4,13 Nominal cooling output ² kW 7,02 EER ² 3,27 Dimensions hxwxd mm 882x850x330

(1) Outdoor air temperature 7°C (d.b.)/6°C (w.b) and flow temperature 35°C (2) Outdoor air temperature 35°C (d.b.) and flow temperature 18°C 3

Total reliability of the system: integration of technologies One of the key point of the CSI-i system is the total reliability which guarantees hot water supply for heating and DHW. A continuous service is ensured thanks to the three different energy sources the CSI-i system counts on (solar, electric with inverter monobloc heat pump and gas with condensing boiler), even if one of the technologies doesn’t work properly.

In case of failure of the heat pump, the CSI-i system can count on the supply of solar energy integrated with the condensing boiler.

In case of lack of gas to supply the boiler (or in case of failure), the system makes use of the heat pump to produce hot water up to 60°C.

or ct

le

ol rc

la

So

Luna Platinum CSI-i External sensor

Heat Pump

Dehumidifier

Dehumidifier Z1

Quality Environment Safety

Quality Environment Safety are Baxi strategic aims and the awarded certifications ensure compliance with the specific regulations

36061 BASSANO DEL GRAPPA (VI) - ITALY Via Trozzetti, 20 marketing@baxi.it www.baxi.it The Company assumes no responsibility for any possible contents mistakes, and reserves the right to make changes in products, due to technical or commercial demands, at any time without notice.

Baxi S.p.A. 02-14 (E)

Z2