Domestic range - Baxi by Baxi SPA

General catalogue COMMERCIAL AND TECHNICAL INFORMATION

Domestic Range

March 2014 Edition

Company Profile BAXI SPA has a proud tradition of developing and producing boilers and heating systems to the highest technological standards. For over 30 years BAXI SPA has provided a wide range of cutting-edge solutions, anticipating market evolutions and paying attention to customer needs.

How to read this catalogue In this catalogue we show the complete range of BAXI products. On each page, in addition to the product benefits, there is a detailed list of the appliance characteristics, a technical chart, and coloured icons. These icons refer to the specific pages of the technical section of the catalogue where, by segment, the technical drawings and all the specific accessories are represented.

In the technical section you will find:

Dimensional Flue pipe technical accessories drawings Graphs Flue systems

Hydraulic accessories

Thermoregulation accessories

Other accessories

More details and information on the website By accessing to the www.baxi.it, Reserved Area and then to the Tech Area, just after a quick registration it is possible to display and download the following documents:

• Certifications • Fault Finding List • General Catalogues • Instructions Manuals • PCB Service Instructions • Spare Parts Catalogues • Technical Drawings • Technical INFO • Technical presentations

Index Gas condensing boilers Hybrid sistems

4 13

Gas boilers Wall hung boilers

Floor standing boilers

Solid fuel boilers

Solar systems

Indirect cylinders

Water heaters

Technical section

47 3

Gas condensing boilers

Heating only and combi

With DHW ministorage

Combi with DHW storage

- Luna Platinum - Luna Duo-tec - Duo-tec Compact

- Duo-tec Max

- Nuvola Platinum - Nuvola Duo-tec

05 06 07 08 09 10

Combi with DHW storage and solar integration - Platinum FS 11 - Luna3 Comfort HT Solar 12

Gas condensing boilers

Luna Platinum

Technical pages 48-81 82-88 89-92 93-95

• • • • • • •

Removable control panel for wall-hung installation with wide text display, regulation knob, menu selection buttons and back-lighting; supplied with the boiler Wide modulation ratio up to 1÷10: better efficiency thanks to reduced switch-on/switch-off of the boiler Gas Adaptive Control (GAC) system: combustion automatic control to maintain constantly the highest level of efficiency Integrated control of a solar system* Complete soundproofing of the generator Full modulating circulating pump Frontal access for advanced diagnostics Modulation ratio

Control panel

the modulation system is able to adapt the heat output to the energy demanded by the building.

innovative removable control panel distinguished by a clear back-lighting and easiness of use, thanks to the navigation knob and two push-buttons dedicated to the set of the comfort and complete programming of the boiler.

Hydraulic system

3 way electric diverter valve (also heating only models) Stainless steel premixing burner Stainless steel water/flue heat exchanger Stainless steel enhanced DHW exchanger to ensure condensation also in DHW mode Modulating fan with electronic speed adjusting system Automatic by-pass Full modulating low energy pump of the heating circuit with built-in air vent System to prevent pump and diverter valve sticking operating every 24 hours Heating circuit relief valve set at 3 bar

Thermoregulation system

Built-in climatic regulation (outdoor sensor available as optional) Control of multi-zones system option Cascade installation option Room sensor, heating circuit and sanitary timers included in the control panel

Control system

Overheat limit thermostat of the water/flue exchanger Hydraulic pressure switch to prevent boiler operating in event of low water Safety NTC sensor against flues overheat Electronic temperatures control by NTC sensors Full anti-frost device Electronic thermometer Digital heating circuit pressure gauge

*in case of contemporary control of a solar system and a zone by the wallmounted control panel, it is necessary to install a programmable clip in/external module THINK.

Combi 24 GA Product code Maximum DHW heat input

Maximum heating heat input Maximum DHW heat output Maximum heating heat output 80/60°C Maximum heating heat output 50/30°C Minimum heating heat output 80/60°C Minimum heating heat output 50/30°C

kW kW kW kW kW kW

Heating onlys

33 GA

1.12 GA 1.18 GA 1.24 GA 1.32 GA

7102695 7102703 7102665 7108435 7106583 7108436 24,7 34 20,6 24 20 21,8 2,4 2,7

28,9 33 28 30,6 3,3 3,6

12,4 12 13,1 2 2,2

17,4 16,9 18,4 2,4 2,7

24,7 24 26,1 2,4 2,7

33 32 34,9 3,2 3,5

HHHH

109,8 97,7 105,8 107,7 5 -5 10/0,8 25/80 35/60

109,8 97,8 105,8 107,8 5 -5 8/0,8 25/80 35/60

109,8 97,7 105,8 107,7 5 -5 8/0,8 25/80 35/60

109,8 97,6 105,7 107,6 5 -5 8/0,8 25/80 35/60

109,8 97,6 105,7 107,6 5 -5 10/0,8 25/80 35/60

Energetic efficiency (92/42/CEE) Average efficiency (DIN 4702-T8) Nominal efficiency 80/60°C Nominal efficiency 50/30°C Efficiency 30% NOx class (EN 483) Minimum working temperature Expansion vessel capacity/pre-charge Heating temperature range. DHW temperature range DHW production ΔT 25°C (1)

°C l/bar °C °C

109,8 97,7 105,8 107,6 5 -5 8/0,8 25/80 35/60

l/min

13,8

18,9

Minimum capacity DHW flow rate Minimum pressure DHW circuit Maximum pressure heating circuit Maximum pressure DHW circuit Coaxial flue system Ø 60/100 max length Dual flue system Ø 80 max length Maximum flue mass flow rate Minimum flue mass flow rate Maximum flue temperature

l/min bar bar bar m m kg/s kg/s °C

2 0,15 3 8 10 80 0,012 0,001 80

2 0,15 3 8 10 80 0,016 0,002 80

3 10 80 0,006 0,001 75

3 10 80 0,008 0,001 75

3 10 80 0,012 0,001 80

3 10 80 0,016 0,002 80

Dimensions (h x w x d) Net weight Gas type Power consumption

mm kg

34,5

37,5

Grade of protection

% % % %

120

145

IPX5D

760 x 450 x 345 34,5 34,5 Natural Gas/LPG 108 122 IPX5D

IPX5D

120

130

IPX5D

(1) without flow restrictor. s

Heating only models are connectable to Combi 80 L and UB-UB INOX 80/120 lt cylinder. See page 35 for sanitary performance.

Luna Duo-tec

Technical pages 48-81 82-88 89-92 93-95

• • • • • • •

Digital control panel with back-lighted LCD display Wide modulation ratio up to 1÷7: better efficiency thanks to reduced switch-on/switch-off of the boiler Gas Adaptive Control (GAC) system: combustion automatic control to maintain constantly the highest level of efficiency Modulating circulating pump Complete soundproofing of the generator Frontal access for advanced diagnostics Integration with solar system option Modulation ratio

Diagnostics

the modulation system is able to adapt the heat output to the energy demanded by the building.

on the control panel there is easy access for the diagnostics. With a USB connection it is possible to check single boilers or multiple boilers functions.

Combi

Hydraulic system

3 way electric diverter valve (also heating only models) Stainless steel premixing burner Stainless steel water/flue heat exchanger Stainless steel enhanced DHW exchanger to ensure condensation also in DHW mode Modulating fan with electronic speed adjusting system Automatic by-pass Modulating low energy pump of the heating circuit with built-in air vent System to prevent pump and diverter valve sticking operating every 24 hours Central relief valve set at 3 bar

Thermoregulation system

Built-in climatic regulation (outdoor sensor available as optional) Control of multi-zones system option

Control system

24 GA

28 GA

33 GA

Heating onlys 40 GA 1.12 GA 1.24 GA 1.28 GA

7101931 7101932 7101933 7102871 7102852 7102853 7105684

Product code Maximum DHW heat input

24,7

28,9

41,2

Maximum heating heat input

20,6

24,7

28,9

12,4

24,7

28,9

Maximum DHW heat output

Maximum heating heat output 80/60°C

Maximum heating heat output 50/30°C

21,8

26,1

30,6

34,9

13,1

26,1

30,5

Minimum heating heat output 80/60°C

3,4

3,8

4,7

5,7

3,4

Minimum heating heat output 50/30°C

3,7

4,1

5,1

6,3

2,2

3,7

4,3

Energetic efficiency (92/42/CEE)

HHHH

Average efficiency (DIN 4702-T8)

109,8

Nominal efficiency 80/60°C

97,7

97,8

97,6

Nominal efficiency 50/30°C

105,8

105,7

Efficiency 30%

107,6

107,7

107,8

107,6

-5

NOx class (EN 483) Minimum working temperature Expansion vessel capacity/pre-charge Heating temperature range. DHW temperature range

°C l/bar

8/0,8

10/0,8 10/0,8

8/0,8

°C

25/80

°C

35/60

DHW production ΔT 25°C (1)

l/min

13,8

16,1

18,9

22,9

Minimum capacity DHW flow rate

l/min

Minimum pressure DHW circuit

bar

0,15

Maximum pressure heating circuit

bar

Maximum pressure DHW circuit

bar

Coaxial flue system Ø 60/100 max length Dual flue system Ø 80 max length

Maximum flue mass flow rate

kg/s

0,012

0,014

0,016

0,019

0,006

0,012

0,014

Minimum flue mass flow rate

kg/s

0,002

0,003

0,001

0,002

Maximum flue temperature

°C

Dimensions (h x w x d)

Net weight

38,5

39,5

34,5

760 x 450 x 345

Gas type Power consumption Grade of protection

34,5

Natural Gas/LPG W

102

114

133

142

108

102

114

IPX5D

(1) without flow restrictor. s

Heating only models are connectable to Combi 80 L and UB-UB INOX 80/120 lt cylinder. See page 35 for sanitary performance.

Gas condensing boilers

Duo-tec Compact

Technical pages 48-81 82-88 89-92 93-95

• Digital control panel with back-lighted wide LCD display • Wide modulation ratio up to 1÷7: better efficiency thanks to

reduced switch-on/switch-off of the boiler • Ultra compact dimensions (700x400x299 mm) • Gas Adaptive Control (GAC) system: combustion automatic control to maintain constantly the highest level of efficiency • Modulating circulating pump • Complete soundproofing of the generator Compact dimensions

Modulation ratio the modulation system is able to adapt the heat output to the energy demanded by the building.

Duo-tec Compact is ideal to be installed in narrow space thanks to its compact dimensions

Combi

Hydraulic system

3 way electric diverter valve Stainless steel premixing burner Stainless steel water/flue heat exchanger Stainless steel enhanced DHW exchanger to ensure condensation also in DHW mode Modulating fan with electronic speed adjusting system Automatic by-pass Modulating low energy pump of the heating circuit with built-in air vent System to prevent pump and diverter valve sticking operating every 24 hours Central relief valve set at 3 bar

Thermoregulation system

Built-in climatic regulation (outdoor sensor available as optional) Control of multi-zones system option

Control system

Product code

Heating onlys

20 GA

24 GA

1.24 GA

7108973

7106765

7108974

Maximum DHW heat input

19,9

24,7

Maximum heating heat input

19,9

20,6

24,7

Maximum DHW heat output

19,4

Maximum heating heat output 80/60°C

19,4

Maximum heating heat output 50/30°C

21,1

21,8

26,1

Minimum heating heat output 80/60°C

3,4

Minimum heating heat output 50/30°C

3,7

Energetic efficiency (92/42/CEE)

HHHH

Average efficiency (DIN 4702-T8)

109,8

Nominal efficiency 80/60°C

97,7

97,6

Nominal efficiency 50/30°C

105,8

105,7

Efficiency 30%

107,6

-5

NOx class (EN 483) Minimum working temperature Expansion vessel capacity/pre-charge Heating temperature range. DHW temperature range

°C l/bar

7/0,8

8/0,8

°C

25/80

°C

35/60

DHW production ΔT 25°C (1)

l/min

11,4

13,8

Minimum capacity DHW flow rate

l/min

Minimum pressure DHW circuit

bar

0,15

Maximum pressure heating circuit

bar

Maximum pressure DHW circuit

bar

Coaxial flue system Ø 60/100 max length Dual flue system Ø 80 max length

Maximum flue mass flow rate

kg/s

0,009

0,011

0,012

Minimum flue mass flow rate

kg/s

0,002

Maximum flue temperature

°C

Dimensions (h x w x d)

700x400x299

Net weight

Gas type Power consumption Grade of protection

700x400x299 700 x 400 x 299 34

102

IPx5D

IPX5D

(1) without flow restrictor. s

Natural Gas/LPG

Heating only models are connectable to UB-UB INOX 80/120 lt cylinder. See page 35 for sanitary performance.

Duo-tec Max

Technical pages 48-81 82-88 89-92 93-95

• Digital control panel with back-lighted LCD display • Mini storage tank integrated in the expansion vessel (patented by Baxi) • *** DHW comfort (EN 13203) • Wide modulation ratio 1÷7: better efficiency thanks to reduced switch-on/switch-off of the boiler • Gas Adaptive Control (GAC) system: combustion automatic control to maintain constantly the highest level of efficiency • Circulating pump with modulation • Complete soundproofing of the generator • Frontal access for advanced diagnostics Sanitary comfort

Modulation ratio

Thanks to the mini storage tank and to the enhanced plate heat exchanger, DHW is quickly available, at a constant temperature also with different flow rates

the modulation system is able to adapt the heat output to the energy demanded by the building.

Combi with DHW integrated mini storage tank

Hydraulic system

Thermoregulation system

33 GA Product code Maximum DHW heat input

Maximum heating heat input

28,9

Maximum DHW heat output

Maximum heating heat output 80/60°C

Maximum heating heat output 50/30°C

30,6

Minimum heating heat output 80/60°C

4,7

Minimum heating heat output 50/30°C

5,1

Energetic effi ciency (92/42/CEE)

HHHH

Average efficiency (DIN 4702-T8)

Nominal efficiency 80/60°C

97,7

Nominal efficiency 50/30°C

105,8

Effi ciency 30%

107,7

°C

-5

l/bar

8/0,8

Built-in climatic regulation (outdoor sensor available as optional) Control of multi-zones system option

NOx class (EN 483)

Control system

Mini storage tank capacity

Overheat limit thermostat of the water/flue exchanger Hydraulic pressure switch to prevent boiler operating in event of low water Overheat limit thermostat against flues overheat Electronic temperatures control by NTC sensors Safety NTC sensor against flues overheat Full anti-frost device Electronic thermometer Digital heating circuit pressure gauge

7102880

Minimum working temperature Expansion vessel capacity/pre-charge Heating temperature range. DHW temperature range

°C

25/80

°C

35/60

DHW production ΔT 25°C (1)

l/min

18,9

Minimum capacity DHW flow rate

l/min

bar

0,15

Minimum pressure DHW circuit Maximum pressure heating circuit

bar

Maximum pressure DHW circuit

bar

Coaxial flue system Ø 60/100 max length

Dual flue system Ø 80 max length

Maximum flue mass flow rate

kg/s

0,016

Minimum flue mass flow rate

kg/s

0,002

Maximum flue temperature

°C

Dimensions (h x w x d)

760 x 450 x 345

Net weight

Gas type Power consumption Grade of protection

109,8

(1) without flow restrictor.

39,5 Natural Gas/LPG

133 IPX5D

Gas condensing boilers

Nuvola Platinum

Technical pages 48-81 82-88 89-92 93-95

• Removable control panel for wall-hung installation with wide text display, regulation knob, menu selection buttons and back-lighting; supplied with the boiler • Wide modulation ratio up to 1÷10: better efficiency thanks to reduced switch-on/switch-off of the boiler • Gas Adaptive Control (GAC) system: combustion automatic control to maintain constantly the highest level of efficiency • Full modulating circulating pump • High DHW performances: up to 500 lt in 30 minutes (33 kW model) • Integrated sanitary expansion vessel • Frontal access for advanced diagnostics Modulation ratio

Control panel

the modulation system is able to adapt the heat output to the energy demanded by the building.

Hydraulic system

3 way electric diverter valve Stainless steel premixing burner Stainless steel heat exchanger Stainless steel tank Modulating fan with electronic speed adjusting system Automatic by-pass Full modulating low energy pump of the heating circuit with built-in air vent System to prevent pump and diverter valve sticking operating every 24 hours Heating circuit relief valve set at 3 bar Tank relief valve set at 8 bar Integrated sanitary 2 litres expansion vessel Sanitary recirculation option

Thermoregulation system

Integrated climatic regulation (outdoor sensor available as optional) Control of multi-zones system option Room sensor, heating circuit and sanitary timers included in the control panel

Control system

Overheat limit thermostat of the water/flue exchanger Hydraulic pressure switch to prevent boiler operating in event of low water Overheat limit thermostat against flues overheat Electronic temperatures control by NTC sensors Anti legionella function Full anti-frost device Electronic thermometer Digital heating circuit pressure gauge

Combi with DHW storage 24 GA

33 GA 7107052 34

Product code Maximum DHW heat input

7107051 24,7

Maximum heating heat input Maximum DHW heat output Maximum heating heat output 80/60°C Maximum heating heat output 50/30°C Minimum heating heat output 80/60°C Minimum heating heat output 50/30°C

kW kW kW kW kW kW

20,6 24 20 21,8 2,4 2,7

28,9 33 28 30,6 3,3 3,6

HHHH

°C l/bar °C °C l l/bar l/min

109,8 97,7 105,8 107,6 5 -5 7,5/0,8 25/80 35/60 45 2/3,5 16,6

109,8 97,7 105,8 107,7 5 -5 7,5/0,8 25/80 35/60 45 2/3,5 19,5

DHW production at discharge ΔT 30°C (1)

l/min l/30’

13,8 385

18,9 500

Maximum pressure heating circuit Maximum pressure DHW circuit Coaxial flue system Ø 60/100 max length Dual flue system Ø 80 max length Maximum flue mass flow rate Minimum flue mass flow rate Maximum flue temperature

bar bar m m kg/s kg/s °C

3 8 10 80 0,012 0,001 80

3 8 10 80 0,016 0,002 80

Dimensions (h x w x d) Net weight Gas type Power consumption

mm Kg

950x600x466 62 Natural Gas 120

950x600x466 64 Natural Gas 145

IPX5D

Energetic efficiency (92/42/CEE) Average efficiency (DIN 4702-T8) Nominal efficiency 80/60°C Nominal efficiency 50/30°C Efficiency 30% NOx class (EN 483) Minimum working temperature Expansion vessel capacity/pre-charge Heating temperature range DHW temperature range Tank capacity Tank expansion vessel capacity/pre-charge Specific flow rate (EN 625) DHW production ΔT 25°C (1)

Grade of protection

% % % %

(1) without flow restrictor.

Nuvola Duo-tec

Technical pages 48-81 82-88 89-92 93-95

• Digital control panel with back-lighted LCD display • Wide modulation ratio up to 1÷7: better efficiency thanks to reduced switch-on/switch-off of the boiler • Gas Adaptive Control (GAC) system: combustion automatic control to maintain constantly the highest level of efficiency • Modulating circulating pump • High DHW performances: up to 500 lt in 30 minutes (∆T 30°C) • Stainless steel 45 lt cylinder • Frontal access for advanced diagnostics • DHW expansion vessel supplied with the boyler Nuvola Duo-tec 33 GA VES Modulation ratio

Diagnostics

the modulation system is able to adapt the heat output to the energy demanded by the building.

on the control panel there is easy access for the diagnostics. With a USB connection it is possible to check single boilers or multiple boilers functions.

Combi with DHW storage

Hydraulic system

3 way electric diverter valve Stainless steel premixing burner Stainless steel heat exchanger Stainless steel tank Modulating fan with electronic speed adjusting system Automatic by-pass Modulating low energy pump of the heating circuit with built-in air vent System to prevent pump and diverter valve sticking operating every 24 hours Central relief valve set at 3 bar Tank relief valve set at 8 bar Sanitary 2 litres expansion vessel available as optional Sanitary recirculation option

Thermoregulation system

Built-in climatic regulation (outdoor sensor available as optional) Control of multi-zones system option

Control system

Overheat limit thermostat of the water/flue exchanger Hydraulic pressure switch to prevent boiler operating in event of low water Overheat limit thermostat against flues overheat Electronic temperatures control by NTC sensors Anti legionella function Full anti-frost device Electronic thermometer Digital heating circuit pressure gauge

Product code

24 GA

33 GA

7105982

7105983

7114051

Maximum DHW heat input

16,5

24,7

34,0

Maximum heating heat input

12,4

20,6

28,9

Maximum DHW heat output

Maximum heating heat output 80/60°C

Maximum heating heat output 50/30°C

13,1

21,8

30,6

Minimum heating heat output 80/60°C

2,2

3,4

4,7

Minimum heating heat output 50/30°C

2,4

3,7

5,1

Energetic efficiency (92/42/CEE)

HHHH

Average efficiency (DIN 4702-T8)

109,8

Nominal efficiency 80/60°C

97,8

97,7

Nominal efficiency 50/30°C

105,8

Efficiency 30%

107,8

107,6

107,7

°C

-5

NOx class (EN 483) Minimum working temperature Expansion vessel capacity/pre-charge

l/bar

7,5/0,8

Heating temperature range

°C

25/80

DHW temperature range

°C

35/60

l/bar

2/2,5

Specific flow rate (EN 625)

l/min

13,3

16,6

19,5

DHW production ΔT 25°C (1)

l/min

9,2

13,8

18,9

l/30’

275

385

500 3

Tank capacity Tank expansion vessel capacity/pre-charge

DHW production at discharge ΔT 30°C

(1)

Maximum pressure heating circuit

bar

Maximum pressure DHW circuit

bar

Coaxial flue system Ø 60/100 max length Dual flue system Ø 80 max length

Maximum flue mass flow rate

kg/s

0,008

0,012

0,016

Minimum flue mass flow rate

kg/s

0,001

0,002

Maximum flue temperature

°C

Dimensions (h x w x d)

950x600x466

Net weight

67,5

Natural gas/LPG

Natural gas/LGP

Gas type Power consumption Grade of protection (1) without flow restrictor.

16 GA

112

102

133

IPx5D

Gas condensing boilers

Platinum FS

Technical pages 48-81 82-88 89-92 93-95

• Wide modulation ratio up to 1:10: better efficiency and noiseless • Gas Adaptive Control (GAC) system: combustion automatic control • Full modulating circulating pump (Erp Ready – Class A) • Enamelled vitrified stratified steel cylinder - 220 lt capacity - with coil exchanger for solar integration (mod. Solar) • Enamelled vitrified steel cylinder - 160 lt capacity - with single coil exchanger (mod. Combi) • Mixed system (1 high tempertature + 1 low temperature) available as optional • Solar hydraulic group supplied with the cylinder (pump, safety valve, flow rate regulator, air vent) (mod. Solar) • Solar expansion vessel supplied with the cylinder (mod. Solar) • DHW expansion vessel supplied with the cylinder (mod. Combi and mod. Solar) • Removable control panel THINK Hydraulic system

200

600

3 way electric diverter valve 723 Stainless steel premixing burner 920 844 Stainless steel water/flue heat exchanger Stainless steel enhanced DHW exchanger to ensure condensation also in DHW mode 220 lt thermal stratification cylinder made of vitrified steel with solar integration through coil exchanger Modulating fan with electronic speed adjusting system 780 Automatic by-pass 200 Full modulating low energy pump of the heating 1201 circuit with built-in air vent System to prevent pump and diverter valve sticking operating every84424 hours Heating circuit relief valve set at 3 bar Cylinder relief valve set at 10 bar 600 600 (COMBI & SOLAR models) Circulating pump for the cylinder (SOLAR model) Solar expansion vessel (18 l) (SOLAR model) Solar hydraulic group (pump, safety valve, flow rate regulator, air vent) (SOLAR model) Thermostatic mixing valve on the DHW outlet of the cylinder (SOLAR & COMBI models) Sanitary recirculation option (SOLAR & COMBI models)

Thermoregulation system

132

Stratification cylinder

Modular installation

The 220 litres cylinder with thermal stratification grants a fast heating of the sanitary water through an enhanced plates exchanger, ensuring high performance and constant availability of domestic hot water.

Platinum FS has been designed to grant the maximum installation flexibility also in narrow spaces. It is possible to install the boiler separately from the cylinder.

Combi 132

Heating only

DHW storage DHW storage and solar integration 32 GA Combi 160 32 GA Solar 220 1.32 GA

7213896

7213895

7213869

Maximum DHW heat output

Product code kW

Maximum heating heat output 80/60 °C

Minimum heat output 80/60 °C

3,2

Heat output (30% power output)

9,6

Energetic efficiency (92/42/CEE)

HHHH

Efficiency (Pmin - 30°C return temp)

108,5

Efficiency (Pmax 80/60°C)

97,6

°C

-5

Expansion vessel capacity / pre-charge

l/bar

18/0,5

Solar expansion vessel capacity / pre-charge

l/bar

Nox class (EN 483) Minimum working temperature

18/2,5

Built-in climatic regulation (outdoor sensor available as optional) Control of multi-zones system option Room sensor, heating circuit and sanitary timers included in the control panel

Heating temperature range

°C

20-80

DHW temperature range

°C

35-60

Cylinder capacity

160

220

Cylinder expansion vessel capacity / pre-charge

8/3,5

Control system

Specific flow rate (EN 13203)

l/min

24,5

DHW production ∆T 30°C

l/min

15,33

Maximum pressure heating circuit

bar

Maximum pressure DHW circuit

bar

Coaxial flue system Ø 60/100 max length

Dual flue system Ø 80 max length m 80 80

Maximum flue temperature

°C

Dimensions (h x w x d)

Net weight

1742x600x723 2042x600x780 918x600x720 144

Gas type Grade of protection

187

Natural Gas/LPG IPx5D

IPX5D

Luna3 Comfort HT Solar

Technical pages 48-81 82-88 89-92 93-95

• Wide modulation ratio 1÷6: better and noiseless boiler working • 200 lt thermal stratification cylinder made of vitrified steel with solar integration • Remote control with LCD display supplied with the boiler; it includes room thermostat, heating and sanitary timers functions • Mixed system (low and high temperature) installation option • Built-in climatic regulation (outdoor sensor available as optional) • Controller, expansion vessel and hydraulic group for the solar system, integrated in the boiler casing Stratification cylinder

Modular installation

Hydraulic system

3 way electric diverter valve Stainless steel premixing burner Stainless steel heat exchanger with sound proofing composite casing Stainless steel enhanced DHW exchanger to ensure condensation also in DHW mode 200 lt thermal stratification cylinder made of vitrified steel with solar integration through coil exchanger Modulating fan with electronic speed adjusting system Automatic by-pass Multi-speeds low energy pump of the heating circuit with built-in air vent System to prevent pump and diverter valve sticking operating every 24 hours Heating circuit relief valve set at 3 bar Cylinder relief valve set at 8 bar Circulating pump for the cylinder Cylinder expansion vessel Solar expansion vessel Solar hydraulic group (pump, safety valve, flow rate regulator, air vent) Thermostatic mixing valve on the DHW outlet of the cylinder Sanitary recirculation option

Thermoregulation system

Solar controller (pump and two temperature sensors) Built-in climatic regulation (outdoor sensor available as optional) Control of multi-zones system option Room sensor, central heating and sanitary timers included in the control panel

Control system

Overheat limit thermostat for the water/flue exchanger Hydraulic pressure switch to prevent boiler operating in the event of low water Safety NTC sensor against flues overheat Electronic temperatures control by NTC sensors Anti-legionella function Full anti-frost device Thermometer of the cylinder Heating circuit electronic thermometer Heating circuit pressure gauge 12

The 200 litres cylinder with thermal stratification grants a fast heating of the sanitary water through an enhanced plates exchanger, ensuring high performance and constant availability of domestic hot water.

Luna3 Comfort HT Solar has been designed to grant the maximum installation flexibility also in narrow spaces. It is possible to install the boiler separately from the cylinder.

Combi with DHW storage and solar integration 120-120 MS*

240-240 MS*

Product code Maximum DHW heat input

HLZ kW

71413001-71413011 12,4

71411691-71412971 24,7

Maximum heating heat input Maximum DHW heat output Maximum heating heat output 80/60 °C Maximum heating heat output 50/30 °C Minimum heat output 80/60 °C Minimum heat output 50/30 °C

kW kW kW kW kW kW

12,4 12 12 13 2** 2,2**

20,5 24 20 21,6 4 4,3

°C l/bar

HHHH 109,8 97,6 105,1 108 5 -5 8/0,5

HHHH 109,8 97,6 105,1 107,5 5 -5 8/0,5

Solar expansion vessel capacity / pre-charge l Heating temperature range °C DHW temperature range °C Cylinder capacity l Cylinder expansion vessel capacity / pre-charge l Specific flow rate (EN 625) l/min DHW production ∆T 25°C (1) l/min

18/2,5 20/80 35/60 200 8/3,5 18,5 6,9

18/2,5 20/80 35/60 200 8/3,5 27 13,8

Maximum pressure heating circuit Maximum pressure DHW circuit Maximum pressure DHW solar circuit Coaxial flue system Ø 60/100 max length Duel flue system Ø 80 max length Maximum flue mass flow rate Minimum flue mass flow rate Maximum flue temperature

bar bar bar m m kg/s kg/s °C

3 8 6 10 80 0,006 0,002 73

3 8 6 10 80 0,012 0,002 73

Dimensions (h x w x d) Net weight Gas type

mm kg

Energetic efficiency (92/42/CEE) Average efficiency (DIN 4702-T8) Minimum heat output 80/60 °C Minimum heat output 50/30 °C Energetic efficiency 30% Nox class (EN 483) Minimum working temperature Expansion vessel capacity / pre-charge

Power consumption Grade of protection

% % % %

2056x600x640 170-194 (MS) 170-194 (MS) Nat. gas / LPG

297-497 (MS)

IPX5D

(1) without flow restrictor. * Model with mixed system supplied with the boiler. **Boiler working with Natural gas. In case of LPG convertion the minimum output is 3,9 kW (80/60°C) and 4,2 kW (50/30°C)

Hybrid Systems

- Luna Platinum CSI-i - PCIB-i

14 15

Luna Platinum CSI-i

Technical pages

Luna Platinum CSI-i is the new compact hybrid system (including a condensing boiler, an air to water monobloc heat pump and a 300 lt puffer) as it integrates, in the complete version, all the devices for the hydraulic and electronic management of a solar system, of a heat pump, of mixed zones, 2 low temperature zones (LT) (independent) and 1 high temperature zone (HT).

LUNA PLATINUM CSI-i with integrated electronics control of a solar system

1 high temperature zone + 2 low temperature zones 1 high temperature zone + 1 low temperature zone 2 low temperature zones 1 direct high temperature zone

SOLUTIONS

To meet different installation needs Luna Platinum CSI-i has been developed in 3 configurations: • Luna Platinum CSI-i 1HT+2 LT, solar management • Luna Platinum CSI-i 1 HT+ 1 LT, solar management • Luna Platinum CSI-i 2 LT, solar management

litres/min Tap water at 40°C in 20 min*

*the performance is referred to the following use conditions: cold water inlet temperature 10°C, puffer set point (upper part) 70°C

Puffer CSI

Features

lt/min

40 °C

DHW for users

10 °C Mains water

• Inverter air to water monobloc heat pump • Circulating pump Erp Ready Class A (reduced consumption) • GAC ( Gas Adaptive Control) automatic combustion control • Wide modulation ratio 1:10 higher efficiency and noiseless • Power set: heating power output set according to design data • 300 litres stainless steel puffer tank with graphite insulation • Integrated electronics and hydraulic group to manage a solar thermal system also in heating mode (only version with solar group) • Integrated electronics and hydraulic group to manage mixed systems for air-conditioning in summer and in winter (in the different configurations)

70 °C

20’

Timing (min)

Luna Platinum CSI-i 633 1 HT + 2 LT

1 HT + 2 LT

2 LT

7112637

7112643

7112641

Product code Gas condensing boilers (Luna Platinum 33 GA) Maximum DHW heat input kW Maximum heating heat input kW Range of DHW heat output kW Range of heating heat output kW Energetic efficiency (92/42/CEE) DHW production ∆T 30°C lt/min Dimensions h x w x d

34 28,9 3,3-33 3,3-28 HHHH

Inverter air to water monobloc heat pump (PBM-i 6) Nominal heating capacity ¹ kW 5,80 COP ¹ 4,30 Nominal cooling output ² kW 4,45 EER ² 4,28 Dimensions hxwxd mm 658x825x300

2060x868x672

Luna Platinum CSI-i 1033 1 HT + 2 LT

1 HT + 1 LT

2 LT

7112638

7112644

7112642

34 28,9 3,3-33 3,3-28 HHHH

Inverter air to water monobloc heat pump PBM-i 10 Nominal heating capacity ¹ kW 9,55 COP ¹ 4,13 Nominal cooling output ² kW 7,02 EER ² 3,27 Dimensions hxwxd mm 882x850x330

2060x868x672

(1) Outdoor air temperature 7°C (d.b.)/6°C (w.b) and flow temperature 35°C (2) Outdoor air temperature 35°C (d.b.) and flow temperature 18°C

Accessories Room hygrostat with fixed regulation Adjustable room hygrostat Room humidity sensor Room thermostat Wall embedded dehumidifier DBV 14 Wall embedded dehumidifier for cooling DBV - c 14 Galvanized steel template Front panel Ceiling embedded dehumidifier DBO 16 Ceiling embedded dehumidifier for cooling DBO - c 16 Metal template Luna Platinum CSI-i 14

7108085 7108086 7108130 7108088 LNU 61201001 LNU 61231001 LNU 71000001 LNU 71000002 LNU 61101001 LNU 61131001 7109170

PCIB-i

NEW

Technical pages

Hybrid split systems with monobloc pumps. • • • • •

Condensing boiler Luna Platinum, modulation ratio 1:10 Inverter air to water monobloc heat pump, modulation from 30% to 130% System Manager to control the system, with expansions modules as option 15 configurations available for the system, others on demand High flexibility in choosing and installing the components

PCIB-i 624

Code

It is made of:

LSP 69000010

- Luna Platinum 1.24 GA - Outdoor air sensor - Hot water sensor for the cylinder - Air to water monobloc heat pump PBM-i 6 (external unit) - Internal module for PBM-i (System Manager) - Remote control panel - Outdoor air sensor

- Flow/return heat pump water sensors with sensor socket fittings (n°2 pcs) - Puffer tank sensor - Cylinder sensor (to control DHW from the System Manager) - Metal mesh water filter G1” ¼ - Liquid flow switch with T ¾” connection

PCIB-i 1032

Code

It is made of: - Luna Platinum 1.32 GA - Outdoor air sensor - Hot water sensor for the cylinder - Air to water monobloc heat pump PBM-i 10 (external unit) - Internal module for PBM-i (System Manager) - Remote control panel - Outdoor air sensor

LSP 69000011

- Flow/return heat pump water sensors with sensor socket fittings (n°2 pcs) - Puffer sensor - Cylinder sensor (to control DHW from the System Manager) - Metal mesh water filter G1” ¼ - Liquid flow switch with T 1” connection

PCIB-i 1632

Code

It is made of: - Luna Platinum 1.32 GA - Outdoor air sensor - Hot water sensor for the cylinder - Air to water monobloc heat pump PBM-i 16 (external unit) - Internal module for PBM-i (System Manager) - Remote control panel - Outdoor air sensor

LSP 69000013

Heat pumps supplied without expansion vessel

Accessories Remote control panel (to be added to the included one) Cascade management key board (1) System Manager expansion module Serial card RS 485 for Modbus Vibration dampers 3 - way valve 1” 1/4 for DHW Outlet electric heater 3 kW 230V Outlet electric heater 3 kW 400V Outlet electric heater 6 kW 400V Outlet electric heater 9 kW 400V (1)

Necessary for heat pumps in cascade

LSP 71004001 LNP 71004005 LNP 71004014 LNP 71004006 LNP 71004010 LNP 71004007 LNP 71004001 LNP 71004002 LNP 71004003 LNP 71004004 15

Gas boilers Wall hung boilers

Heating only and combi

- Luna3 Comfort 17 - Luna3 18

Low NOx - Luna3 Blue

With micro storage

- Luna3 Comfort Max

With storage

Outdoor installation

- Nuvola3 Comfort - Nuvola3 BS 40

- Luna3 Comfort Air - Luna3 Silver Space

21 22 23 23

Ultra compact dimensions - Ecofour 24 - Eco Compact 25 - Main5 26

Floor standing boilers

Heating only and combi with storage

Heating only

- Slim

- Slim HPS - Slim EF

28 29

Gas boilers

Luna3 Comfort

Technical pages 48-81 82-88 89-92 93-95

• Remote control with LCD display supplied with the boiler; it includes room thermostat, heating and sanitary timers functions • Enhanced heat exchanger • Hydraulic group made of brass and flowmeter with turbine (combi models) • Sanitary pre-heating function • Connection to Baxi integrated solar systems option

Enhanced heat exchanger

Connection to solar systems

Made of copper pipes protected with anticorrosion coating. It has a wide surface of exchange.

Electronics has been designed to allow the boiler to turn on only when the cylinder temperature is lower than the one requested.

Combi Fanned flue

Hydraulic system

240 Fi

3 way electric diverter valve Steel burner Primary exchanger made of copper pipes protected with anticorrosion coating Stainless steel sanitary exchanger (combi models) Automatic by-pass Low energy pump with automatic air vent System to prevent pump and 3 way valve sticking operating every 24 hours Heating circuit relief valve set at 3 bar (1)

Thermoregulation system

Two heating temperatures possible ranges: 30/85°C, 30/45°C Built-in climatic regulation (outdoor sensor available as optional) Control of multi-zones system option Room sensor, heating circuit and sanitary timers included in the control panel Sanitary timer (indirect cylinder)

Control system

Overheat limit thermostat for the water/flue exchanger Hydraulic pressure switch to prevent boiler operating in event of low water Pressure switch to ensure safe discharge of flue products (fanned flue models) Flue thermostat to ensure safe discharge of flue products (open flue models) Electronic temperatures control by NTC sensors Full anti-frost device Electronic thermometer AFR system, patented by Baxi that allows the efficiency optimization thanks to a perfect inlet air regulation (fanned flue models with dual flue system) Heating circuit pressure gauge (1)

In the heating only models, the electric motor is available as optional.

Product code

Natural Gas LPG

Heating only* Open flue

310 Fi

240 i

Open flue

Fanned flue 1.240 Fi

45631358 45224358 45524358 45631158 CSZ 45224158

1.310 Fi

1.240 i

45531358 45531158

45124358

CSE

45624358 45624158

Maximum heat input

26,9

33,3

26,3

26,9

33,3

26,3

Minimum heat input

10,6

11,9

10,6

11,9

10,6

Maximum heat output

Minimum heat output

9,3

10,4

9,3

10,4

9,3

Maximum efficiency

91,2

Energetic efficiency (92/42/CEE) Efficiency at 30% Minimum working temperature

92,9

93,1

91,2

92,9

93,1

HHH

90,2

90,8

90,29

90,2

90,8

90,29

°C

-5

Expansion vessel/pre-charge

l/bar

8/0,5

10/0,5

8/0,5

10/0,5

8/0,5

Heating system max pressure

bar

Heating temperature range

°C

30/85 30/45

DHW temperature range

°C

35/60

DHW production ∆T 25°C

l/min

14,3

13,7

Minimum capacity DHW flow rate

l/min

Minimum pressure on DHW circuit

bar

0,15

Maximum pressure on DHW circuit

bar

Ø mm

120

120 -

Flue tube Coaxial flue system Ø 60/100

Dual flue system Ø 80 max length

Maximum flue mass flow rate

kg/s

0,017

0,018

0,019

0,017

0,018

0,019

Minimum flue mass flow rate

kg/s

0,017

0,019

0,017

0,019

0,017

Maximum flue temperature

°C

135

145

110

135

145

110

Dimensions (h x w x d)

Net weight

730x400x299

Gas type Power consumption Grade of protection

Natural Gas/LPG W

135

165

135

165

IPX5D

* Heating only models are connectable to Combi 80 L/UB-UB INOX 80/120 lt. See page 35 for sanitary performance.

Luna3

Technical pages 48-81 82-88 89-92 93-95

• • • • • •

Digital control panel with wide LCD display Enhanced heat exchanger Hydraulic group made of brass and flowmeter with turbine (combi models) Sanitary pre-heating function Connection to Baxi integrated solar systems option Built-in climatic regulation (outdoor sensor available as optional)

Wide LCD display

Hydraulic group made of brass

The interaction with the boiler is easier thanks to information clearly displayed in the wide LCD display and dedicated push-buttons for setting and regulation.

Luna3 is provided with 3 way electric valve. Thanks to the flowmeter with turbine, the sanitary water is detected and gauged.

Heating only*

Combi

Hydraulic system

Steel burner Primary exchanger made of copper pipes protected with anticorrosion coating Stainless steel sanitary exchanger (combi models) Automatic by-pass Low energy pump with automatic air vent System to prevent pump and 3 way valve sticking operating every 24 hours Heating circuit relief valve set at 3 bar

Thermoregulation system

Two heating temperatures possible ranges: 30/85°C, 30/45°C Remote controller and climatic regulator option Built-in climatic regulation (outdoor sensor available as optional)

Control system

Overheat limit thermostat for the water/flue exchanger Hydraulic pressure switch to prevent boiler’s operating in event of low water Pressure switch to ensure safe discharge of flue products (fanned flue models) Flue thermostat to ensure safe discharge of flue products (open flue models) Electronic temperatures control by NTC sensors Full anti-frost device Electronic thermometer AFR system, patented by Baxi that allows the efficiency optimization thanks to a perfect inlet air regulation (fanned flue models with dual flue system) Heating circuit pressure gauge

Open flue

Fanned flue

240 Fi

280 Fi

310 Fi

240 i

1.310 Fi

CSE

45624366

45628366

45631366

45224366

45531366

Maximum heat input

26,9

30,1

33,3

26,3

33,3

Minimum heat input

10,6

11,9

10,6

11,9

Maximum heat output

Minimum heat output

9,3

10,4

9,3

10,4

Maximum efficiency

Product code

Natural Gas

Energetic efficiency (92/42/CEE)

92,9

93,1

91,2

93,1

HHH

HHH 90,8

Efficiency at 30%

90,2

90,8

90,29

Minimum working temperature

°C

-5

Expansion vessel/pre-charge

l/bar

8/0,5

10/0,5

8/0,5

10/0,5

Heating system max pressure

bar

°C

30/85 30/45

Heating temperature range DHW temperature range

°C

35/60

DHW production ∆T 25°C

l/min

14,3

13,7

Minimum capacity DHW flow rate

l/min

Minimum pressure on DHW circuit

bar

0,15

Maximum pressure on DHW circuit

bar

Ø mm

120

Flue tube Coaxial flue system Ø 60/100

Maximum flue mass flow rate

Dual flue system Ø 80 max length

kg/s

0,017

0,018

0,019

0,018

Minimum flue mass flow rate

kg/s

0,017

0,019

0,017

0,019

Maximum flue temperature

°C

135

140

145

110

145

Dimensions (h x w x d)

Net weight

760x450x345

Gas type Power consumption Grade of protection

40 Natural Gas/LPG s

135

165

IPX5D

* Heating only models are connectable to UB-UB INOX 80/120 lt. See page 35 for sanitary performance. s

For operation with LPG use the conversion kit (injectors) available as optional.

Gas boilers

Luna3 Blue

Technical pages 48-81 82-88 89-92 93-95

• Low NOx burner-Class NOx 5 • Constant efficiency at over 93% for all heat inputs (fanned flue models) • Hydraulic group made of brass and flowmeter with turbine (combi models) • Sanitary pre-heating function • Connection to Baxi integrated solar systems option

Low NOx burner

Constant efficiency

The burner has been designed to grant NOx emissions lower than 10mg/kWh

Constant efficiency at over 93% for all heat inputs (fanned flue models)

Hydraulic system

3 way electric diverter valve Water refrigerated Low NOx burner Primary exchanger made of copper pipes protected with anticorrosion coating Stainless steel DHW exchanger (combi models) Modulating fan with electronic speed adjusting system (fanned flue models) Automatic by-pass Multi-speeds low energy pump with automatic air vent System to prevent pump and diverter valve sticking operating every 24 hours Heating circuit relief valve set at 3 bar

Thermoregulation system

Two heating temperatures possible ranges: 30/85°C, 30/45°C Built-in climatic regulation (outdoor sensor available as optional) Remote controller and climatic regulator (supplied as optional)

Control system

Overheat limit thermostat for the water/flue exchanger Hydraulic pressure switch to prevent boiler’s operating in event of low water Pressure switch to ensure safe discharge of flue products (fanned flue models) Flue thermostat to ensure safe discharge of flue products (open flue models) Chimney sweeper function Electronic temperatures control by NTC sensors Full anti-frost device Electronic thermometer Heating circuit pressure gauge

Combi

Heating only*

Fanned flue

Open flue

240Fi

280Fi

180i

240i

1.240Fi

1.180i

ESB

45624366

45628366

45218366

45224366

45524366

45118366

Maximum efficiency

93,2

93,1

90,3

93,2

90,3

Minimum heat input

11,9

10,6

11,9

10,6

Maximum heat output

17,5

Minimum heat output

10,7

9,3

10,4

10,7

9,3

Maximum efficiency

92,9

91,2

Product code

Natural Gas

Energetic efficiency (92/42/CEE) Efficiency at 30% Minimum working temperature

92,9

93,1

91,2

HHH

91,2

92,5

89,6

91,2

89,6

°C

-5

Expansion vessel/pre-charge

l/bar

8/0,5

10/0,5

8/0,5

Heating system max pressure

bar

°C

30/85 30/45

Heating temperature range DHW temperature range

°C

35/60

DHW production ∆T 25°C

l/min

13,7

Minimum capacity DHW flow rate

l/min

Minimum pressure on DHW circuit

bar

0,15

Maximum pressure on DHW circuit

bar

Ø mm

110

130

110 -

Flue tube Coaxial flue system Ø 60/100

Dual flue system Ø 80 max length

Maximum flue mass flow rate

kg/s

0,018

0,017

0,015

0,009

0,018

0,015

Minimum flue mass flow rate

kg/s

0,015

0,014

0,012

0,035

0,015

0,012

Maximum flue temperature

°C

135

140

120

135

100

Dimensions (h x w x d)

Net weight

41,5

39,5

760x450x345

Gas type Power consumption Grade of protection

Natural Gas/LPG s W

135

165

110

135

110

IPX5D

*Heating only models are connectable to UB-UB INOX 80/120 lt. See page 35 for sanitary performance. s

For operation with LPG use the conversion kit (injectors) available as optional.

Luna3 Comfort Max

Technical pages 48-81 82-88 89-92 93-95

• Micro storage tank integrated in the expansion vessel (patented Baxi) and ***DHW comfort (EN 13203) • Enhanced heat exchanger • Hydraulic group made of brass and flowmeter with turbine • Remote control with LCD display supplied with the boiler; it includes room thermostat, heating and sanitary timers functions

Integrated micro storage tank

Sanitary comfort Thanks to the micro storage tank and to the enhanced plate heat exchanger, DHW is quickly available, at a constant temperature also with different flow rates

The special expansion vessel with integrated micro storage, grants DHW always at your disposal, to satisfy, without waiting times any sanitary demand.

Hydraulic system

3 way electric diverter valve Steel burner Primary exchanger made of copper pipes protected with anticorrosion coating Automatic by-pass Multi-speeds low energy pump with automatic air vent System to prevent pump and diverter valve sticking operating every 24 hours Heating circuit relief valve set at 3 bar

Thermoregulation system

Two heating temperatures possible ranges: 30/85°C, 30/45°C Built-in climatic regulation (outdoor sensor available as option) Control of multi-zones system option Room sensor, heating circuit and sanitary timers included in the control panel

Control system

Combi with DHW micro-storage Fanned flue 250Fi

310Fi

CSB

45825358

45831358

Maximum heat input

26,9

33,3

Minimum heat input

10,6

11,9

Maximum heat output

Minimum heat output

9,3

10,4

Maximum efficiency

92,9

93,1

Product code

Natural Gas

Energetic efficiency (92/42/CEE)

HHH

Efficiency at 30%

90,2

90,8

Minimum working temperature

°C

-5

Expansion vessel/pre-charge

l/bar

8/0,5

Micro storage tank capacity

3,5

°C

30/85 30/45

Heating temperature range DHW temperature range

°C

35/60

DHW production ∆T 25°C

l/min

14,3

Minimum capacity DHW flow rate

l/min

Minimum pressure on DHW circuit

bar

0,15

0,15 8

Maximum pressure on DHW circuit Flue tube Coaxial flue system Ø 60/100 Dual flue system Ø 80 max length

bar

Ø mm

Maximum flue mass flow rate

kg/s

0,017

0,018

Minimum flue mass flow rate

kg/s

0,017

0,019

Maximum flue temperature

°C

135

145

Dimensions (h x w x d)

Net weight

760x450x345 33

Gas type Power consumption Grade of protection s

38 Natural Gas/LPG s

135

165

IPX5D

For operation with LPG use the conversion kit (injectors) available as optional.

Gas boilers

Nuvola3 Comfort

Technical pages 48-81 82-88 89-92 93-95

• Remote control with LCD display supplied with the boiler; it includes room thermostat, heating and sanitary timers functions • High sanitary performances: up to 490 lt in 30 min (∆T 30°C) • 60 lt stainless steel cylinder • Built-in sanitary expansion vessel

High performance

Built-in expansion vessel

Nuvola3 Comfort is the range with integrated storage which grants high sanitary performance and it represents the ideal solution in case of simultaneous big hot water demands.

Nuvola3 Comfort is provided with a built-in sanitary expansion vessel which represents the ideal solution in case of high pressures on the mains sanitary water.

Hydraulic system

3 way electric diverter valve Steel burner Primary exchanger made of copper pipes protected with anticorrosion coating 60 lt stainless steel cylinder Automatic by-pass Low energy pump with automatic air vent System to prevent pump and 3 way valve sticking operating every 24 hours Heating circuit relief valve set at 3 bar Cylinder relief valve set at 8 bar Built-in sanitary 2 litres expansion vessel Sanitary recirculation option

Thermoregulation system

Control system

Overheat limit thermostat for the water/flue exchanger Hydraulic pressure switch to prevent boiler operating in event of low water Pressure switch to ensure safe discharge of flue products (fanned flue models) Flue thermostat to ensure safe discharge of flue products (open flue models) Electronic temperatures control by NTC sensors Full anti-frost device Anti-legionella function Electronic thermometer AFR system, patented by Baxi that allows the efficiency optimization thanks to a perfect inlet air regulation (fanned flue models with dual flue system) Heating circuit pressure gauge

Combi with DHW storage Fanned flue

Open flue

140 Fi

240 Fi

280 Fi

320 Fi

240 i

280 i

CSB

45714358

45724358 45724158

45728358 45728158

45732358 45732158

45424358

45428358

Maximum heat input

15,3

26,3

30,1

34,5

27,1

31,1

Minimum heat input

6,9

11,9

Maximum heat output

24,4

Minimum heat output

10,4

Maximum efficiency

90,9

92,9

93,1

93,2

90,2

90,6

HH 88,3

HHH 90,4

HHH 90,5

HH 89,4

HH 89,5

Product code

Natural Gas LPG

Energetic efficiency (92/42/CEE) Efficiency at 30% Minimum working temperature

°C

-5

Expansion vessel/pre-charge

l/bar

7,5/0,5

Heating system max pressure

bar

Heating temperature range

°C

30/85 30/45

DHW temperature range

°C

35/65

l/bar

2/3,5

Specific flow according to EN 625

l/min

14,1

18,2

21,5

18,2

DHW production ∆T 25°C

l/min

8,1

16,1

18,3

16,1

l/30’

260

390

450

490

390

450

bar

Ø mm

140

140 -

Cylinder capacity Cylinder expansion vessel capacity/pre-charge (1)

DHW production at discharge ∆T 30°C Maximum pressure on DHW circuit Flue tube

(1)

Coaxial flue system Ø 60/100

Dual flue system Ø 80 max length

Maximum flue mass flow rate

kg/s

0,015

0,018

0,022

0,024

Minimum flue mass flow rate

kg/s

0,015

0,017

0,018

0,021

Maximum flue temperature

°C

120

134

142

110

115

Dimensions (h x w x d)

Net weight

950x600x466

Gas type Power consumption Grade of protection (1)

Natural Gas/LPG W

190

110

IPX5D

Without flow restrictor.

Gas boilers

Nuvola3 BS40

Technical pages 48-81 82-88 89-92 93-95

• 40 lt thermal dynamic stratification cylinder: - immediate DHW delivery thanks to 40 lt storage ready to be used at the needed temperature - less scale formation thanks to the DHW plates exchanger - high sanitary performances thanks to high efficiency of heat exchanger • Vertical hydraulic connections for easier replacement of existing boilers • Digital control panel with wide LCD display with text and symbols clearly showed • Up to 440 litres DHW production in 30’ (ΔT 30°C) any scale formation is blocked thanks to the direct DHW exchange through the plates exchanger

Wide LCD display With dedicated push-buttons for programming and regulation, for a clear display of the information

Hydraulic system

3 way electric diverter valve Steel burner Primary exchanger made of copper pipes protected with anticorrosion coating 30 lt vitrified stratification cylinder Automatic by-pass Low energy pump with automatic air vent System to prevent pump and 3 way valve sticking operating every 24 hours Heating circuit relief valve set at 3 bar Cylinder relief valve set at 8 bar Sanitary recirculation option

Thermoregulation system

Two heating temperatures possible ranges: 30/85°C, 30/45°C Built-in climatic regulation (outdoor sensor available as optional) Remote controller and climatic regulator (supplied as optional) Control of multi-zones system option

Control system

Overheat limit thermostat for the water/flue exchanger Hydraulic pressure switch to prevent boiler operating in the event of low water Pressure switch to ensure safe discharge of flue products (fanned flue models) Flue thermostat to ensure safe discharge of flue products (open flue models) Full anti-frost device Anti-legionella function Electronic thermometer AFR system, patented by Baxi that allows the efficiency optimization thanks to a perfect inlet air regulation (fanned flue models with dual flue system) Heating circuit pressure gauge

Combi with DHW storage Fanned flue

Product code

240 Fi BS40

280 Fi BS40

240 i BS 40

280 i BS40

CSB

45714351 45714151

45724351 45724151

45728351 45728151

45424351 45424151

45428351 45428151

Maximum heat input

15,3

26,3

30,1

27,1

31,1

Minimum heat input

6,9

11,9

Maximum heat output

24,4

Minimum heat output

10,4

Maximum efficiency

90,9

92,9

93,1

90,2

90,6

HH 88,3

HHH 90,4

HHH 90,5

HH 89,4

HH 89,5

Energetic efficiency (92/42/CEE) Efficiency at 30%

°C

-5

Expansion vessel/pre-charge

Minimum working temperature

l/bar

7/0,5

7,5/0,5

Heating system max pressure

bar

Heating temperature range

°C

30/85 30/45

DHW temperature range

°C

35/65

Specific flow according to EN 625

l/min

11,4

17,5

DHW production ∆T 25°C (1)

l/min

8,1

16,1

DHW production at discharge ∆T 30°C (1)

l/30’

230

350

400

350

400

bar

Ø mm

140

140 -

Cylinder capacity

Maximum pressure on DHW circuit Flue tube Coaxial flue system Ø 60/100

Dual flue system Ø 80 max length

Maximum flue mass flow rate

kg/s

0,015

0,017

0,018

0,022

0,024

Minimum flue mass flow rate

kg/s

0,015

0,018

0,021

Maximum flue temperature

°C

120

134

142

110

115

Dimensions (h x w x d)

Net weight

950x600x466

Gas type Power consumption Grade of protection (1)

Natural Gas LPG

Open flue

140 Fi BS40

Without flow restrictor.

63 Natural Gas/LPG

190

215

140

165

IPX5D

Luna3 Comfort Air / Silver Space

Technical pages 48-81 82-88 89-92 93-95

• Outdoor installation, (or in partially protect places) minimum working temperature: -15°C • Remote control (WIRELESS data transmission for Luna3 Comfort Air) with LCD display supplied with the boiler; it includes room thermostat, heating and sanitary timers functions • Connection to Baxi integrated solar systems option

Outdoor installation

Remote control

It allows a complete managing of the domestic comfort from inside. The WIRELESS transmission (Luna3 Comfort Air) that occurs between the boiler and the remote control makes installation process easier since electric connections between the boiler and the remote control are not necessary.

Ideal for outdoor installation thanks to the minimum working temperature -15°C, grade of protection IPX5D and anti-frost device.

Hydraulic system

3 way electric diverter valve Steel burner Primary exchanger made of copper pipes protected with anticorrosion coating Stainless steel DHW heat exchanger Automatic by-pass Low energy pump with automatic air vent System to prevent pump and diverter valve sticking operating every 24 hours Heating circuit relief valve set at 3 bar Automatic filling of the heating system (Luna3 Silver Space)

Thermoregulation system

Control system

Overheat limit thermostat for the water/flue exchanger Hydraulic pressure switch to prevent boiler’s operating in event of low water Pressure switch to ensure safe discharge of flue products Electronic temperatures control by NTC sensors Full anti-frost device Electronic thermometer AFR system, patented by Baxi that allows the efficiency optimization thanks to a perfect inlet air regulation (fanned flue models with dual flue system) - Luna3 Silver Space Heating circuit pressure gauge

Luna3 Comfort Air

Luna3 Silver Space

Combi

Fanned flue Product code

Natural Gas LPG

CSB

Fanned flue

250 Fi

310 Fi

45625369 45625169

45625367 45625167

45631367 45631167

Maximum heat input

26,9

33,3

Minimum heat input

10,6

11,9

Maximum heat output

Minimum heat output

9,3

10,4

Maximum efficiency

Energetic efficiency (92/42/CEE) Efficiency at 30% Minimum working temperature Expansion vessel/pre-charge Heating system max pressure Heating temperature range

% °C l/bar

92,9

93,1

HHH 90,2

HHH 90,8

-15

8/0,5

bar

°C

30/85 30/45

35/60

35/60 14,3

35/60 18

DHW temperature range DHW production ∆T 25°C

°C l/min

Minimum capacity DHW flow rate

l/min

Minimum pressure on DHW circuit

bar

0,15

Maximum pressure on DHW circuit

14,3

bar

Coaxial flue system Ø 60/100

Dual flue system Ø 80 max length

Maximum flue mass flow rate

kg/s

0,017

0,018

Minimum flue mass flow rate

kg/s

0,017

0,019

Maximum flue temperature

°C

135

145

Dimensions (h x w x d)

763x450x345

Net weight

Gas type Power consumption Grade of protection

Natural Gas/LPG W

135 IPX5D

830x550x250 40,5

Natural Gas/LPG 135 165 IPX5D

IPX5D

Ecofour

Technical pages 48-81 82-88 89-92 93-95

• • • • • •

Ultra compact dimensions (730x400x299 mm) Digital control panel with wide LCD display and push-buttons Hydraulic group made of brass with electric 3 way valve DHW production through stainless steel plate exchanger Full anti-frost device Outdoor sensor option

Compact dimensions

Control panel Thanks to the control panel with knobs and LCD display, you can easily select temperatures and control the diagnostics.

Ecofour is ideal to be installed in narrow space thanks to its compact dimensions

Combi Fanned flue

Hydraulic system

3 way diverter valve Steel burner Primary exchanger made of copper pipes protected with anticorrosion coating Stainless steel DHW heat exchanger Automatic by-pass Low energy circulating pump with automatic air vent System to prevent pump and diverter 3 way electric valve operating every 24 hours Heating circuit relief valve set at 3 bar

Efficiency at 30%

Thermoregulation system

Expansion vessel capacity/pre-charge

Two heating temperatures possible ranges: 30/85°C, 30/45°C Built-in climatic regulation(outdoor sensor available as optional)

Control system

Product code

Natural Gas

CSE

Heating only* Open flue

Fanned flue

Open flue

24 F

1.24 F

1.14 F

1.24

1.14

46624354

46224354

46524354

46514354

46124354

46114354

Maximum heat input

25,8

26,3

25,8

15,1

26,3

15,4

Minimum heat input

10,6

7,1

10,6

7,1

Maximum heat output

Minimum heat output

9,3

6,0

9,3

6,0

Maximum efficiency

92,93

91,20

92,93

92,50

91,20

90,90

HHH

90,37

89,30

90,37

89,80

89,30

88,60

Energetic efficiency (92/42/CEE) Minimum working temperature Maximum capacity of the heating system

% °C

-5

l/bar

6/0,5

6/0,5 100

100

Heating system max pressure

bar

Heating temperature range

°C

30/85 30/45

DHW temperature range

°C

35/60

5/60

Specific flow according to EN 625

l/min

10.7

10,7

DHW production ∆T 25°C

l/min

13,7

Minimum capacity DHW flow rate

l/min

2,0

Maximum pressure on DHW circuit

bar

Flue tube

Ø mm

120

110

Coaxial flue system Ø 60/100 max length

Dual flue system Ø 80 max length

Maximum flue mass flow rate

kg/s

0,014

0,020

0,014

0,012

0,020

0,014

Minimum flue mass flow rate

kg/s

0,014

0,018

0,014

0,012

0,018

0,013

Maximum flue temperature

°C

146

110

149

115

110

Dimensions (h x w x d)

Net weight

IPX5D

730x400x299

Gas type Grade of protection

IPX5D

For operation with LPG use the conversion kit (injectors) available as optional.

Natural Gas/LPG s IPX5D IPX5D

*Heating only models are connectable to UB-UB INOX 80/120 lt. See page 35 for sanitary performance.

Gas boilers

Eco Compact

Technical pages 48-81 82-88 89-92 93-95

• • • • • • •

NEW

Ultra compact dimensions (700x400x298 mm) Combustion control system (GDC) to guarantee the safe operation of the boiler even in case of combustion anomalies (flue obstruction, flue recirculation, etc.) 8 lt. expansion vessel to manage high water content installations Easy access to the components thanks to the new structure and internal layout Compact hydraulic group with electric 3 way valve, equipped with an anti-torsion metal bar for a safe installation (24 F model) Full anti-frost device Integration with Baxi solar system option Compact dimensions

Control panel Thanks to the control panel with knobs and LCD display, you can easily select temperatures and control the diagnostics.

Eco Compact, distinguished by compact dimensions (700x400x298 mm), is ideal to be installed in narrow space

Combi

Heating only Open flue

Fanned flue

Hydraulic system

3 way diverter valve (standard equipment for 24 F model; optional for 1.24 F model) Steel burner Primary exchanger made of copper pipes protected with anticorrosion coating Stainless steel DHW heat exchanger Automatic by-pass Low energy circulating pump with automatic air vent System to prevent pump and diverter 3 way electric valve operating every 24 hours Heating circuit relief valve set at 3 bar

Control system

Overheat limit thermostat for the water/flue exchanger Hydraulic pressure switch to prevent boiler’s operating in event of low water Heating circuit pressure gauge Electronic thermometer

14 F Product code

Natural Gas

CSE

7115719

Fanned flue

Open flue

18 F

24 F

1.14 F

1.24 F

1.24

7115720

7105065 7113140

soon available

7115737

7112870

soon available

Maximum heat input

15,4

19,4

25,8

26,3

15,4

25,8

26,3

Minimum heat input

10,6

Maximum heat output

Minimum heat output

9,3

Maximum efficiency

91,2

Energetic efficiency (92/42/CEE) Efficiency at 30% Minimum working temperature Expansion vessel capacity/pre-charge Maximum capacity of the heating system

90,8

92,8

93,1

91,2

90,8

93,1

HHH

90,2

90,5

89,3

90,2

90,5

89,3

°C

-5

l/bar

8/0,5

6/0,5

8/0,5

6/0,5

bar

30/85

Heating temperature range

°C

35/60

DHW temperature range

°C

8,6

10,7

Specific flow according to EN 625

l/min

10,3

13,7

Minimum capacity DHW flow rate

l/min

Maximum pressure on DHW circuit

bar

8 -

Heating system max pressure

Flue tube

Ø mm

Coaxial flue system Ø 60/100 max length

Dual flue system Ø 80 max length

0,014

0,015

0,02

0,013

0,015

0,02

Maximum flue mass flow rate

kg/s

0,013

0,015

0,018

0,013

0,015

0,018

Minimum flue mass flow rate

kg/s

128

140

110

125

140

110

Dimensions (h x w x d)

Net weight

Natural Gas/LPG s 110 110 110

110

IPx5D

700x400x298

Gas type Grade of protection

110

Grade of protection

IPx5D

730x400x299

IPx5D

*Heating only models are connectable to UB-UB INOX 80/120 lt. See page 35 for sanitary performance.

Main5

Technical pages 48-81 82-88 89-92 93-95

• Ultra compact dimensions • Bi-thermic rapid heat exchanger • Able to safely work with a minimum gas pressure of 4 mbar and 170 V minimum supply voltage • Combustion control system (GDC) to guarantee the safe operation of the boiler even in case of combustion anomalies (flue obstruction, flue recirculation, etc.) • Easy access to the components, including the expansion vessel, thanks to the new structure and internal layout • Anti-scale electronic system • Anti-frost protection Control Panel The new digital control panel with LCD display and push-buttons, make the boiler’s working check easy and immediate: clear and simple symbols allow to show all boiler’s parameters and anomalies that may occur

Hydraulic system

Steel burner Bi-thermic rapid heat exchanger made of copper pipes protected with anticorrosion coating Automatic by-pass System to prevent pump sticking operating every 24 hours Central heating relief valve set at 3 bar

Control system

Combustion control system (GDC) Overheat limit thermostat for the water/flue exchanger Hydraulic pressure switch to prevent boiler’s operating in event of low water Electronic temperatures control by NTC sensors Anti-frost protection of CH circuit Anti-scale electronic system Electronic thermometer Central heating pressure gauge

Combi 14F Product code

Natural Gas

24F

Maximum heat input

19,4

25,8

Minimum heat input

10,6

Maximum heat output

Minimum heat output

9,3

Maximum efficiency

90,7

92,8

92,9





 90,2

Energetic efficiency (92/42/CEE) Efficiency at 30%

90,1

90,3

Minimum working temperature

°C

-5

l/bar

6/0,5

Expansion vessel capacity/pre-charge Heating system max pressure

bar

Heating temperature range

°C

30/76

DHW temperature range

°C

35/55

DHW production ∆T 25°C

l/min

10,3

13,7

Minimum capacity DHW flow rate

l/min

Minimum pressure on DHW circuit

bar

0,15

Maximum pressure on DHW circuit

bar

Coaxial flue system Ø 60/100 max length

Dual flue system Ø 80 max length

Maximum flue mass flow rate

kg/s

0,014

0,016

Minimum flue mass flow rate

kg/s

0,016

Maximum flue temperature

°C

135

149

Dimensions (h x w x d)

Net weight

700x400x299 27

Gas type Power consumption

Natural Gas/LPG s W

Grade of protection

18F

711178001 711178101 710775002

For operation with LPG use the conversion kit (injectors) available as optional.

110

IPX5D

Gas boilers

Slim

Technical pages 48-81 82-88 89-92 93-95

• Cast iron exchanger • 60 litres stainless steel cylinder (2.300 Fi) • 50 litres cylinder (2.230 i, 2.300 i) • Multifunctional display • Low energy circulating pump (Fi, i models) • System to prevent pump sticking operating every 24 hours • Connection to cylinder option for DHW production (heating only models) Thermoregulation system

Compact dimensions

Built-in climatic regulation (outdoor sensor available as optional) Central heating timer option DHW timer option (DHW production models)

Slim is ideal for installation In compact spaces.

Heating only* Fanned flue 1.230 Fi Product code

WSB

1.230FiN

1.300 Fi

With DHW storage Fanned flue

Open flue 1.300 FiN

1.150 i

1.230 i

1.300 i

1.230 iN

1.300 iN 1.400 iN (1) 1.490 iN (1) 1.620 iN (1) 2.300 Fi

Open flue 2.230 i

2.300 i

43523301 43523347 43530301 43530347 43115301 43123301 43130301 43123347 43130347 43140347 43149347 43162347 43730301 43423301 43430301

Maximum heat input

24,5

16,5

24,5

44,4

54,1

24,5

Minimum heat input

13,5

9,5

13,5

27,5

13,5

Maximum heat output

22,1

29,7

14,9

22,1

29,7

22,1

29,7

48,7

62,2

29,7

22,1

29,7

Minimum heat output

11,8

14,9

8,5

11,8

14,9

11,8

14,9

20,6

24,5

31,6

14,9

11,8

14,9

Maximum efficiency

90,3

90,2

90,1

90,3

90,2

HH 89,6

HH 88,8

HH 88,2

HH 88,5

HH 88,8

HH 88,4

HH 88,9

HH 88,8

HH 88,5

11,8

14,6

11,8

14,6

11,8

14,6

17,4

20,2

25,8

14,6

11,8

14,6

Expansion vessel/pre-charge

l/bar

10/1

Heating system max pressure

bar

Energetic efficiency (92/42/CEE) Energetic efficiency 30% Cast irons sections Cast irons boiler water capacity

Heating temperature range Cylinder temperature regulation

°C

30/85 30/85 30/85 30/85 30/85 30/85 30/85 30/85 30/85 30/85 30/85 30/85 30/85 30/85 30/85 30/45 30/45 30/45 30/45 30/45 30/45 30/45 30/45 30/45 30/45 30/45 30/45 30/45 30/45 30/45

°C

5/65

DHW production ∆T 35°C

l/min

12,2

12,1

DHW production at discharge ∆T 30°C

l/30’

485

366

475

Maximum pressure on DHW system

bar

8 140

Flue tube

Ø mm

110

130

140

130

140

160

180

130

Coaxial flue system Ø 60/100 max length

Dual flue system Ø 80 max length

850 350 600

850 350 520

850 350 600

850 350 680

850 350 600

850 350 680

850 350 635

850 350 715

850 350 875

850 650 600

121

111

144

134

113

136

103

126

150

174

224

184

155

176

Dimensions

Net weight

height width depth

Gas type Power consumption Grade of protection

Natural gas/LPG W

170

120

170

120

IPX4D

* Heating only models are connectable to Slim UB-UB INOX 80/120 lt. See page 35 for sanitary performance. (1) For 1.400 iN - 1.490 iN - 1.620 iN the windproof flue terminal is compulsory.

Slim HPS

Technical pages

• • • •

Body composed by pre-assembled cast iron elements properly designed to optimize the efficiency Stainless steel step-modulation atmospheric burner and gas valve 50 mm fiberglass insulation Flue safety thermostat

Control panel Very user friendly control panel which incorporates full safety features, including control and high limit thermostats, thermometer, and burner on/off switch.

Easy mounting of cast-iron elements Weather compensated central (cascade installations) Connection to an indirect cylinder option Cascade installation option

Heating only Open flue 1.80

1.99

1.110

WSO

7114600

7114601

7114602

Power output Power input

kW kW

56-78,7 62,2-87,4

69,9-98,6 77,7-109,5

74,7-107,9 85,5-120,5

Nominal efficiency Number of elements Number of burners

90 9

89,9 11

89,5 12

lt bar

28 4

34 4

37 4

2,95

9,2

11,6

12,7

4,6-9,1

4,7-9,3

4,6-9,3

160 180 1,70

144 287 1,70

140 330 1,70

Product code

Number of burner injectors Water content of the cast-iron body Maximum pressure in the heating circuit Burner injectors

Natural gas 20 mbar

Flow rate m³/h 15°C 1013 mbar

Design rate (Qn)

Pressure at injectors

mbar

G20

Flue temperature Flue flow rate at design rate Burner injectors Propane gas 37 mbar

G31

Flow rate m³/h 15°C 1013 mbar Pressure at injectors

* with antirefouler These models are connectable to indirect cylinders. See pages 35-37.

°C kg/h Ø Design rate (Qn) mbar

6,7

8,3

9,1

16,1-30,2

16,6-32,7

16,6-34,3

Gas boilers

Slim EF

Technical pages

• • • • •

Body composed by pre-assembled cast iron elements properly designed to optimize the efficiency No need of electric power supply Stainless steel two-stage atmospheric burner and gas valve with pilot burner Piezo electric ignition Flue safety thermostat

Control panel Very user friendly control panel which incorporates full safety features, including control and high limit thermostats, thermometer, and burner on/off switch.

Easy mounting of cast-iron elements Safe lightening by intermittent pilot ignition

Heating only Open flue 1.22

1.31

1.39

1.49

1.61

WSO

7116065

7116066

7116067

7116068

7116069

Power output Power input

kW kW

22 25

30,5 34,8

39,1 44,8

48,8 55

60,7 69,2

Nominal efficiency Number of elements Number of burners

92 3

92 4

92 5

92 6

92 7

bar

10 4

13 4

16 4

19 4

22 4

130

150

180

200

2,64

3,68

4,73

5,82

7,32

100%

9,8

9,6

9,1

11,5

°C kg/h Ø

119 24,7 0,27

118 34,7 0,27

110 52,2 0,27

130 53,1 0,27

141 59,2 0,27

1,97

2,74

3,53

4,34

5,45

Product code

Number of burner injectors Water content of the cast-iron body Maximum pressure in the heating circuit Pilot burner injectors

Natural gas 20 mbar

Flow rate m³/h 15°C 1013 mbar

Design rate (Qn)

Pressure at injectors

mbar

G20

Flue temperature Flue flow rate at design rate Burner injectors Propane gas 37 mbar

G31

Flow rate m³/h 15°C 1013 mbar Pressure at injectors

Design rate (Qn) mbar

100%

* with antirefouler These models are connectable to indirect cylinders. See pages 35-37.

Solid fuel boiler

BPI-Eco

Solid fuel boiler

BPI-Eco

NEW

Technical pages

• • • • • •

Power range: from 23 kW to 67 kW (black coal) Load volume: from 43 dm3 to 137 dm3 Length of wood stump: from 25 cm to 70 cm Boiler capacity: from 30 litres to 66 litres Easier to clean More power for kg (more efficiency)

Solid fuel boiler for heating only Wide loading door and high load volume The primary air is adjusted automatically according to the set temperature The secondary air can be manually adjusted New design of air inlet for improved air distribution 5 models available: from 23 kW to 67 kW

Heating only Open flue

Product code

1.250

1.350

1.450

1.550

1.650

7116512

7116513

7116514

7116515

7116516

67,0

Maximum heat output*

23,0

34,0

45,0

56,0

Duration of a coal load

≥4

Duration of a wood load

≥2

Load volume

dm3

42,7

66,4

90,2

113,9

137,7

Minimum chimney depression

mbar

0,08

0,10

0,12

0,13

0,15

°C

95 50

Number of elements Maximum operating temperature Minumum temperature of water returned to the plant

°C

Maximum working pressure

bar

Test pressure

bar

Water content

66 1001x500x1025

Dimensions (hxwxd)

1001x500x425

1001x500x575

1001x500x725

1001x500x825

Combustion chamber depth

346

496

646

796

946

Weight

226

288

350

412

474

*Carbon heat rate: the heat rate will be reduced by about 10% for the operation with hard wood (birch - oak - olive)

Solar systems

Collectors for forced and natural draft installation

Solar systems Technical pages

Collectors for forced draft installation

SB 25+V/O, SB 20+V/O, SB 100

• Gross surface: 2,51 m² (SB25+V/O), 2,01 m² (SB20+V/O ), 10,05 m2 (SB100) • Meander pipes for a better heat transmission (SB20+,SB25+) • Installation on a pitched, flat built in roof • Solutions for groups from 3 to 7 people • Hydraulic group with electronic regulation available as optional • Connection to the range of cylinders from 200 to 2000 lt, single or double coil option

Product code Gross surface Absorber area Aperture area Collector capacity Maximum working pressure ŋo - Efficiency (with reference to the absorber surface)* α1 Heat losses α2 Heat losses

SVB HP, SVB 26

SB25+V 61525430 2,51 2,35 2,37 2,3 10

LSC m² m² m² lt bar

SB25+O 61525330 2,51 2,35 2,37 2,7 10

Collectors SB20+V SB20+O 61520430 61520330 2,01 2,01 1,88 1,88 1,9 1,9 1,87 2,16 10 10

SB21+ 61521430 2,01 1,88 1,89 1,52 10

SB100 61501010 10,05 9,17 9,43 9 10

81,8

82,4

82,5

81,7

78,7

81,0

W/m²k² W/m²k²

3,505 0,019

3,777 0,016

3,752 0,019

4,027 0,017

4,041 0,0011

3,330 0,013

SVB HP • Modular vacuum tubes collector • Total installation flexibility: the number of tubes can increase, up to 150 pieces (21 sqm) • Unique temperature control device of the water at 95°C • Easy and quick installation

Product code Gross surface Absorber area Aperture area Collector capacity Maximum working pressure ŋo - Efficiency (with reference to the absorber surface)* α1 Heat losses α2 Heat losses

SVB 26 • Gross surface: 2,57 m2 • Absorption capacity 96% • Type of covering: vacuum tubes sidney type with boronsilicate glass and highly selective internal layer Collector SVB HP s 61550541 0,14 0,10 0,11 0,05 6

LSC m² m² m² lt bar

Collector SVB26 61527010 2,57 2,36 2,23 2,27 10

60,5

W/m²k² W/m²k²

1,62 0,008

0,85 0,01

* data based on an average temperature of the heat transfer fluid s code and data referred to a single tube

Collectors for natural draft installation SB 21+

• Gross surface 2,01 m2 • One collector (SB 21+) solution with 150 or 200 liters capacity cylinder • Two collectors (SB 21+) solution with 300 liters capacity cylinder • Installation on flat or pitched roof

Product code Collector Gross surface Absorber area Aperture area Collector capacity Cylinder capacity Maximum working pressure ŋo - Efficiency (with reference to the absorber surface)* α1 Heat losses α2 Heat losses

LSC

STS-150L 69000100 1

m² m² m² lt l bar

150

Collector STS-200L 69000101 1 2,01 1,88 1,89 1,52 200 10

78,7

W/m²k² W/m²k²

4,014 0,0011

STS- 300L 69000102 (flat roof) 69000103 (pitched roof) 2

300

Indirect cylinders

- UB - UB inox - Slim - Slim UB inox - Combi 80 L - Combi 80 L+ - Indirect cylinders

35 35 36 38

Indirect cylinders

UB - UB inox

Technical pages

• 80/120 lt indirect cylinder available in stainless steel or coated steel • Magnesium anode for anticorrosion protection • Nipples in the fixing template • Indirect cylinder temperature controlled directly on the boiler’s control panel

UB Product code 80 Product code 120

Condensig boilers KSG 71403171 KSG 71403181

Cylinder Capacity

Gas boilers

12 kW WH boiler 24 kW WH boiler 28 kW WH boiler 14 kW WH boiler 18 kW WH boiler 24 kW WH boiler 25 kW WH boiler 31 kW WH boiler + UB 80/120 + UB 80/120 + UB 80/120 + UB 80/120 + UB 80/120 + UB 80/120 + UB 80/120 + UB 80/120

80/120

DHW production ∆T 25°C in continuous

l/min

6,9

13,8

16,1

13,7

14,3

DHW production ∆T 30°C at discharge

l/30 min

270/330

430/480

480/530

290/350

340/390

430/480

440/490

490/540

bar

Maximum pressure DHW system UB INOX Product code 80 INOX Product code 120 INOX

Condensig boilers KSG 71408441 KSG 71408451

Cylinder Capacity

80/120

Gas boilers

80/120

DHW production ∆T 25°C in continuous

l/min

6,9

13,8

16,1

13,7

14,3

DHW production ∆T 30°C at discharge

l/30 min

270/330

430/480

480/530

290/350

340/390

430/480

440/490

520/570

bar

Maximum pressure DHW system

80/120

Slim UB - Slim UB inox • 80/120 lt indirect cylinder available in stainless steel or coated steel • Magnesium anode for anticorrosion protection • Nipples in the fixing template • Indirect cylinder temperature controlled directly on the boiler’s control panel

SLIM UB Product code 80 Product code 120

Gas boilers KSW 71412241 KSW 71412251

Cylinder Capacity

14,9 kW FS boiler + UB 80/120

22,1 kW FS boiler + UB 80/120

29,7 kW FS boiler + UB 80/120

40 kW FS boiler + UB 80/120

48,7 kW FS boiler + UB 80/120

62,2 kW FS boiler + UB 80/120

80/120

DHW production ∆T 25°C in continuous

l/min

8,5

12,7

19,5

DHW production ∆T 30°C at discharge

l/30 min

300/360

400/450

490/550

490/610

bar

14,9 kW FS boiler + UB 80/120

22,1 kW FS boiler + UB 80/120

29,7 kW FS boiler + UB 80/120

40 kW FS boiler + UB 80/120

48,7 kW FS boiler + UB 80/120

62,2 kW FS boiler + UB 80/120

80/120

Maximum pressure DHW system SLIM UB INOX Product code 80 INOX Product code 120 INOX

Gas boilers KSW 71408781 KSW 71408791

Cylinder Capacity

80/120

DHW production ∆T 25°C in continuous

l/min

8,5

12,7

19,5

DHW production ∆T 30°C at discharge

l/30 min

300/360

400/450

500/550

570/620

bar

Maximum pressure DHW system

NEW

Technical pages

Combi 80 L+ • • • • •

• • • • •

80 lt stainless steel indirect cylinder connectable to Luna3 Comfort (heating only models) Cylinder temperature sensor included Indirect cylinder temperature controlled directly on the boiler’s control panel Magnesium anode 4 lt expansions vessel kit available as optional (product code KSL 71408611)

NEW

1.12 GA - 1.18 GA 1.24 GA - 1.32 GA models

Combi 80 L+

Luna Platinum

Stainless steel cylinder capacity Cylinder DHW temperature regulation

1.12 GA

1.18 GA

1.24 GA

1.32 GA 80

°C

35/60

DHW production ∆T 25°C in continuous

l/min

6,9

9,7

13,8

18,3

DHW production ∆T 30°C at discharge

l/30 min

252

320

420

550

Maximum recovering time of the cylinder

min

Maximum pressure DHW system

bar

Combi 80 L

80 lt stainless steel indirect cylinder connectable to Platinum GA e Duo-tec GA (heating only models) 4 lt expansions vessel kit included Cylinder temperature sensor included Indirect cylinder temperature controlled directly on the boiler’s control panel Magnesium anode

Luna Platinum + Combi 80 L+

Indirect cylinders Luna Duo-tec + Combi 80 L+

NEW

Technical pages

1.12 GA - 1.24 GA - 1.28 GA models

Combi 80 L+

Luna Duo-tec 1.12 GA Stainless steel cylinder capacity Cylinder DHW temperature regulation

1.24 GA

1.28 GA

°C

35/60

DHW production ∆T 25°C in continuous

l/min

6,9

13,8

16,1

DHW production ∆T 30°C at discharge

l/30 min

252

420

480

Maximum recovering time of the cylinder

min

Maximum pressure DHW system

bar

Luna3 Comfort + Combi

Hydraulic connection kit for heating only boilers KHG 71410701

1.240 Fi - 1.310 Fi - 1.240 i models

Hydraulic connection kit Combi - Luna3 KSL 71411051 Luna3 Comfort 1.240 Fi

1.310 Fi *

°C

35/60

DHW production ∆T 25°C in continuous

l/min

14,3

13,7

DHW production ∆T 30°C at discharge

l/30 min

420

520

420

Maximum recovering time of the cylinder

min

Maximum pressure DHW system

bar

Stainless steel cylinder capacity Cylinder DHW temperature regulation

1.240 i

* also Luna3 1.310 can be connected to Combi 80 L.

Enamelled steel cylinders for boilers and solar systems

Technical pages

• Tanks range from 200 to 500 lt, single and double coil • Enamelled vitrified tanks at 850°C to ensure high protection against corrosion • Insulation made with high-density injected polyurethane foam without CFC • External rigid case in ABS • Magnesium anode (2 in models with double coil) to safeguard the internal tank surface against corrosion • Electric resistances of 1500 W, 2300 W, 3000 W with adjustable thermostat as option • Compatible with all BAXI boilers and solar systems Product code Capacity Dimensions

UBVT 200 SC

UVBT 200 DC

UBVT 300 SC

UBVT 300 DC

UBVT 400 SC

UBVT 400 DC

UBVT 500 DC

7110591

7110592

7110593

7110594

7110595

7110596

7110597

200

300

400

500

1422,5x610

1795,5x610

1671,5x710

1787x760 186

Weight

106

113

128

140

159

Maximum DHW pressure

bar

Maximum coil pressure

bar

Maximum working temperature

°C

Insulation

injected polyurethane

Insulation thickness Heat losses Heat transfer coefficient Coil exchange surface Coil heat exchange (T inlet 80°C - T DHW 10/45°C) Coil water content

Nominal flow rate

kWh/24h (ΔT=40°C)

1,8

2,2

2,6

3,8 3,96

W/K

1,88

2,29

2,71

m2 upper

0,8

1,0

m2 lower

1,2

1,5

1,8

2,5

kW upper

kW lower

lt upper

5,1

6,8

lt lower

8,1

10,1

12,1

16,8

m3/h upper

m3/h lower

DHW production (T inlet 80°C - T DHW

lt/h upper

590

737

10/45°)

lt/h lower

885

1032

1179

1548

Pressure losses

mbar upper

mbar lower

116

0,7

1,3

2,8

3,8

NL number (DIN4708)

Stainless steel cylinders for DHW production • Tanks range with 250 lt double coil and 260 lt single coil models • Weight of only 48 kg and easier transportation with equipped handles • Tank and coils made in DUPLEX stainless steel to maximize the corrosion protection compared to common stainless steel alloys • Tank and connections completely wrapped into the insulation to minimize heat losses • Electric resistance of 2000 W with adjustable thermostat as option • Compatible with all BAXI boilers and solar systems 38

Product code Installation

UBSS 250 DC

UBSS 260 SC

LSC 71525801

LSC 71525701

floor-standing

Capacity

250

260

Upper coil capacity

3,2

Upper coil exchange surface

0,79

Exchanged power - upper coil ΔT=30°C

26,2

mbar

53 to 1000 l/h

Lower coil capacity

6,8

Lower coil exchange surface

1,1

Exchanged power - lower coil ΔT=30°C

36,4

Pressure losses

Heat losses

kWh/24h

1,96

1,98

Weigth (full)

308

Weigth (empty)

Maximum working pressure (heating circuit)

bar

Maximum working pressure (DHW circuit)

bar

Indirect cylinders Technical pages

Vitrified steel cylinder for DHW production for solar integration

Dati tecnici

UB 200 solar

Product code

KSL 71413521

Capacity

200

Solar coil thermal exchange ΔT=30°C

Maximum DHW pressure

bar

Maximum solar circuit pressure

bar

Expansion vessel capacity

Expansion vessel pressure

bar

Voltage

230

Frequency

Nominal power

Weight

145

Dimensions (hxwxd)

1500x600x644

Grade of protection

IPX4D

UB 200 SOLAR

• Vitrified steel DHW cylinder with single coil exchanger for solar integration • To be connected to any combi boiler • Mixing valve and diverter valve supplied with the cylinder • Solar circulating group supplied with the cylinder • Solar controller - supplied with the cylinder • DHW expansion vessel – 8 lt capacity – supplied with the cylinder • Solar expansion vessel – 18 lt capacity – supplied with the cylinder

Enamelled steel cylinders for DHW production for solar integration (with circulating group)

Modello

UBSI 300

UBSI 500

Product code

7110598

7110599

Capacity

Dimensions

• cylinder • hydraulic group • expansion vessel

129

156

bar

Maximum coil pressure

bar

Maximum working temperature

°C

kWh/24h (∆T=40°C)

2,2

3,8

Insulation Insulation thickness Heat losses Heat transfer coefficient

Coil water content Nominal flow rate

• Enamelled tank for DHW production with solar station equipped • Tanks range with 300 lt and 500 lt double coil models • Solar circulating pump equipped • Solar controller equipped • 18 lt solar expansion vessel equipped

1.983x754

Maximum DHW pressure

Coil heat exchange (T inlet 80°C - T DHW 10/45°C)

UBSI 500

500

1.899x604

Weight

Coil exchange surface

UBSI 300

300

DHW production (T inlet 80°C - T DHW 10/45°) Pressure losses NL number (DIN4708)

injected polyurethane

W/K

2,29

3,96

m2 sup.

1,0

m2 inf.

1,5

2,5

kW sup.

kW inf.

lt sup.

6,8

lt inf.

10,1

16,8

m3/h sup.

2,0

m3/h inf.

2,0

lt/h sup.

737

737 1548

lt/h inf.

1032

mbar sup.

mbar inf.

116

1,3

3,8

Technical pages

Vitrified enamelled steel cylinders for DHW production in centralized systems • Tanks range from 800 to 2000 lt, single and double coil • Enamelled vitrified tanks at 850°C to ensure high protection against corrosion • Insulation made with high-density soft polyurethane 100 mm thickness • Magnesium anode (2 in models with double coil) to safeguard the internal tank surface against corrosion • Electric resistances of 1500 W, 2300 W, 3000 W with adjustable thermostat as option

Product code Capacity

UB 800 DC

UB 1000 DC

UB 1000 SC

UB 1500 DC

UB 2000 DC

UB 2000 SC

LSC 71008801

LSC 71010801

LSC 71010701

LSC 71015801

LSC 71020801

LSC 71020701

800

1000

1500

2000

Dimensions

1855x990

2105x990

2185x1200

2470x1300

Weight

220

265

245

365

480

410

Maximum DHW pressure

bar

Maximum coil pressure

bar

Maximum working temperature

°C

Insulation Insulation thickness Heat losses Heat transfer coefficient

soft polyurethane mm

100

kWh/24h (ΔT=40°C)

2,74

3,01

3,89

4,77

W/K

2,85

3,15

4,09

4,97

m2 upper

1,6

1,8

2,8

m lower

2,7

3,0

3,4

4,6

4,3

kW upper

kW lower

120

112

lt upper

9,3

10,4

16,9

lt lower

15,2

17,5

19,5

28,1

26,2

m3/h upper

1,7

2,0

3,1

m3/h lower

2,9

3,2

3,8

5,2

4,8

lt/h upper

1000

1200

1800

lt/h lower

1700

1800

2200

2900

2800

mbar upper

233

mbar lower

236

329

499

1019

832

29,3

37,3

Coil exchange surface 2

Coil heat exchange (T inlet 80°C - T DHW 10/45°C)

Coil water content

Nominal flow rate

DHW production (T inlet 80°C - T DHW 10/45°)

Pressure losses

NL number (DIN4708)

Indirect cylinders Steel cylinders for integration on the heating circuit

Technical pages 75-76

NEW

• Buffer tanks, pipe in tank, tank in tank range from 500 to 1000 lt • Buffer tanks for heat pump for hot and cold water storage (UBPU) • Buffer tanks for integration with solar systems on the heating circuit with stratifier (UBPU SC) • Multi-energy storage tanks with DHW production (UBTT-UBPT) for domestic and residential applications • Insulation with soft polyurethane 100 mm thickness or injected foam 50 mm • Electric resistances of 1500 W, 2300 W, 3000 W with adjustable thermostat as option

Product code Capacity Dimensions Weight Maximum working pressure Maximum working temperature Insulation Insulation thickness Heat losses Heat transfer coefficient

lt mm kg bar °C mm kWh/24h (∆T=40°C) W/K

UBPU 300

UBPU 500

7116702

7116703

300 500 1560x600 1840x600 55 100 6 6 95 95 stiff polyurethane 50 50 1,57 2,11 1,6 2,18

Product code Capacity Dimensions

Dimensions Total capacity

2110x990

1000

Maximum working temperature

°C

Insulation

soft polyurethane mm

100

kWh/24h (∆T=40°C)

2,18

2,74

3,89

W/K

2,29

2,78

4,05

Coil exchange surface

m2 lower

1,8

2,6

3,8

Coil heat exchange (T inlet 80°C - T DHW 10/45°C)

kW lower

Coil water content

lt lower

10,4

14,6

21,6

Nominal flow rate

m3/h lower

1,9

2,8

4,2

lt/h lower

1100

1600

2400

mbar lower

208

700

UBTT 300

UBTT 600

UBTT 1000

7116704

7116705

LSC 71010501

48 7,6

Pressure losses

m2 upper

Coil water content

Nominal flow rate

DHW production 80/60°C

kW lower

Product code

lt upper

11,8

1315x700

1775x995

2050x990

lt lower

16,6

Total capacity

300

600

1000

m3/h upper

1,8

DHW capacity

170

220

m3/h lower

3,2

Weight

140

290

360

lt/h upper

1000

DHW maximum pressure

bar

1800

Maximum coil pressure

bar

°C

lt/h lower

Dimensions

900

Cylinder maximum temperature

Insulation

lt/h

1230

lt/h

1890

mbar upper

mbar lower -

Weight DHW maximum pressure Maximum coil pressure

bar

Cylinder maximum temperature

°C

kWh/24h (∆T=40°C)

3,01

lt/h DHW production 80/60°C - 10/45°C’’

Cylinder maximum temperature

Pressure losses NL number (DIN4708)

Heat loss Heat transfer coefficient

soft polyurethane

Insulation thickness Heat losses

100

kWh/24h (∆T=40°C)

1,57

2,52

2,97

W/K

1,64

2,62

3,09

Exchange surface

m2 lower

1,2

2,5

3,0

313

Coil heat exchange (T inlet 80°C - T DHW 10/45°C)

kW lower

4,0

Coil water content

6,0

14,4

16,7

315

Nominal flow rate

m3/h lower

1,2

2,7

3,2

bar

DHW production (T inlet 80°C - T DHW 10/45°C)

m /h lower

713

1500

1800

Pressure drop

lt/h ilower

310

193

315

mbar lower

1,0

2,2

5,0

W/K

Insulation Insulation thickness

285

1500 2165x1200

200

m2 lower

800 1800x990

DHW capacity

kW upper

500 1775x850 140

DHW corrugate steel pipe surface

Potenza T primario 80°C- T ACS 10/45 °C

lt mm kg

DHW production (T inlet 80°C - T DHW 10/45°C)

Exchange surface

LSC 71015302

bar

Heat transfer coefficient

LSC 71010601

UBPU 1500 SC

Weight

Heat losses

Product code

UBPU 800 SC LSC 71008301

Maximum working pressure

Insulation thickness

UBPT 1000

UBPU 500 SC LSC 71005301

Heat transfer coefficient

NL number (DIN4708)

3,15 soft polyurethane

100

Waters heaters

Electric water heaters

Gas storage water heaters

Gas instantaneous water heaters

Floor standing heat pump water heaters

Water heaters

Electric water heaters

Technical pages 77-78

• Enamelled steel water tank • Temperature regulation with external knob • New ohmic protection system (reduced consumption of the magnesium anode) • Polyurethane insulation without CFC and HCFC • Analogic thermometer • Built-in dielectric fitting • Light indicator • Grade of protection: IP24

Product code

Capacity

Installation

Rating/Voltage

Temperature regulation (with knob)

Dimensions

V530

7110906

Upright

1.200

external

623 x 433 mm

V550

7110907

Upright

1.200

external

585 x 433 mm

V580

7110908

Upright

1.200

external

814 x 433 mm

V510

7110909

100

Upright

1.200

external

973 x 433 mm

O580

7110910

Horizontal

1.500

external

810 x 433 mm

O510

7110911

100

Horizontal

1.500

external

969 x 433 mm

V580 TD

7110912

Thermoelectric upright (right connection)

1.500

external

814 x 433 mm

V580 TS

7110913

Thermoelectric upright (left connection)

1.500

external

814 x 433 mm

V510 TD

7110914

100

Thermoelectric upright (right connection)

1.500

external

973 x 433 mm

V510 TS

7110915

100

Thermoelectric upright (left connection)

1.500

external

973 x 433 mm

R501

7110903

Above sink

1.200

external

456 x 255 mm

R501 SL

7110902

Under sink

1.200

external

456 x 255 mm

R515

7110905

Above sink

1.200

external

400 x 338 mm

R515 SL

7110904

Under sink

1.200

external

400 x 338 mm

Gas storage water heaters

Technical pages

• Porcelain enamel vitrified steel boiler to ensure long-lasting product • Adjustable thermostat • Magnesium anode • Wall hung or floor standing installation

Wall hung

Floor standing

SAG2 50

SAG2 80

SAG2 100

SAG2 125 T

SAG2 155 T

SAG2 195 T

SAG3 300 T

ASB

3110531

3110831

3111031

3111231

3111531

3111931

3113031

100

125

155

195

300

Maximum heat input

4,2

5,8

5.8

7,5

8,5

17,4

Maximum heat output

3,49

4,82

6,3

7,2

7,8

14,6

DHW temperature regulation

°C

40-70

l/min

1,7

2,3

3,0

3,4

3,7

6,9

•

Nat. Gas/LPG

•

Product code Capacity

DHW flow rate ΔT 30°C Thermostat Gas type Thermometer Height

613

863

983

1250

1420

1730

1700

Diameter

450

520

600

Water heaters

Gas instantaneous water heaters NEW

Technical pages

Open flue models • Electronic ignition with battery • Electronic detection of presence of flame • Gas valve with modulation proportional to the water flow to keep the outlet temperature stable • Ignition minimum flow 2,9 lt/min • Operation and battery status LED indicators Fanned flue models • Electronic ignition with cable • Power electronic linear modulation • Electronic water temperature control by NTC sensors • Ignition minimum flow 2,5 lt/min • Digital control panel with LCD display and temperature visualization

Open flue Product code Max heat output

Igniction

Fanned flue

Acquajet 13i

Acquajet 11i

Acquajet 13Fi

Acquajet 11Fi

7213898

7213897

7213900

7213899

19,2

electronic igniction

electronic with cable

lt/min

Dimensions mm (hxlxp)

585x360x220

Weight

10,5

16,5

For operation with LPG use the convertion kit

Water heaters

Floor standing heat pump water heaters NEW

Technical pages

• Domestic hot water production up to 65°C with R134A gas • COP 3,7 (DHW temperature of 51°C –air temperature of 15°C) • Programmable and remote mount control panel • Limited electrical absorption: 500 W • Low noise-level at a 2 m distance • From -5° to 35°C external air temperature operation • Model with solar integration (SPC-S) • Condenser wrapped directly around the indirect cylinder to guarantee an efficient heat transfer without scale formation • Electrical pulse titanium anode • Integrated electrical resistance from 1,6 kW

SPC 200

SPC 300

SPC 300 S

7213893

7112974

7112975

210

270

265

Heat pump power*

1,7

Absorbed electrical power*

500

3,5

3,7

3,6

Product code Capacity

COP* Integrated electrical resistance power

Maximum working pressure

bar

230V Mono

240

357

358

kWh/24h

0,73

0,67

0,75

m3/h

385

Air pressure available for fan

Maximum length for air connection Ø 160mm / Ø 200mm

10/20

R134 A coolant

1,45

dB(A)

105

123

Voltage supply SPC 300 S exchange surface DHW quantity supplied at a temperature of 40°C (15°C for domestic cold water) Heat rejection Air flow

Sound pressure** Empty weight

* Value for domestic water heating from 15° to 51°C with 15°C temperature for air in entrance. ** Measured at a 2-meters distance.

Technical Section Technical drawings Graphs Flue systems

Flue pipe accessories

Hydraulic accessories

Thermoregulation accessories

Other accessories

Technical drawings Graphs Flue systems

Condensing gas boilers Hybrid systems Gas boilers Flue systems Solar collectors Indirect cylinders Electric water heaters Gas water heaters Gas instantaneous water heaters Floor standing heat pump water heaters

48 53 55 64 71 72 77 79 80 81

Condensing gas boilers HEAD mH2O

A69 B 686

50 45

Luna Duo-tec 177

max min

FLOW RATE (l/h)

50 45

179

HEAD mH2O

MR Heating system flow G 3/4” US DHW outlet G 1/2” (for heating only models storage; tank flow G 3/4”) GAS Gas inlet G 3/4” ES Mains water G 1/2” RR Heating system return G 3/4” SC Condensing trap possible to connect on a pipe Ø 21 A Boiler hanging points. Distance between hanging points: 298 mm B Distance between hanging points and hydraulic connections

FLOW RATE (l/h)

A69

Luna Duo-tec 24 GA, 28 GA, 33 GA, 40 GA, 1.12 GA, 1.24 GA, 1.28 GA

max min

179

Luna Platinum 177

B 686

Luna Platinum 24 GA, 33 GA, 1.12 GA, 1.18 GA, 1.24 GA, 1.32 GA

Technical drawings - graphs - flue systems

Condensing gas boilers Duo-tec Compact 20 ga, 24 GA, 1.24 GA

Duo-tec Compact

400 238

FLOW RATE (l/h)

40 30

105 162

B 686

A69

299

Duo-tec Max

Duo-tec Max 33 GA A69

HEAD mH2O

177

max min

B 686

HEAD mH2O

124

FLOW RATE (l/h)

50 45 179

Condensing gas boilers Nuvola Platinum

Nuvola Platinum 24 GA, 33 GA

181

HEAD mH2O

1 2 3 4 5 SC

156,5

DHW outlet G 1/2” Mains water G 1/2” Heating system return G 3/4” Heating system flow G 3/4” Gas inlet G 3/4” Condensing trap possible to connect on a pipe Ø21

MAX MIN

FLOW RATE (l/h)

117,5

100

110

100

110

62,5

bottom view

Nuvola Duo-tec

Nuvola Duo-tec 16 GA, 24 GA, 33 GA VES

181

HEAD mH2O

1 2 3 4 5 SC

156,5

DHW outlet G 1/2” Mains water G 1/2” Heating system return G 3/4” Heating system flow G 3/4” Gas inlet G 3/4” Condensing trap possible to connect on a pipe Ø21

FLOW RATE (l/h)

117,5

100

110

100

110

bottom view

max min

62,5

Technical drawings - graphs - flue systems

Condensing gas boilers Platinum FS 1.32 GA

600

200

132 I

720

918

844

70 167 A 251 816

A B C D G H

128,5

B G

150 715

C 55 121,5

H 112 680

254 818

Heating system return G 3/4” Heating system flow G 3/4” Gas inlet G 1/2” Condensing trap 24x19 2° zone flow (optional) G 3/4” 2° zone return (optional) G 3/4”

Platinum FS 32 GA Combi 160 600

200

132

Prof. 720

70 167 A 1668 1408

D E 816

115 157 245

715

B F

128,5 C 55 121,5

1742

70 40

680

818

598

723

A B C D

E F G H

Heating system return G 3/4” Heating system flow G 3/4” Gas inlet G 1/2” Condensing trap 24x19 200

600

Cold water inlet G3/4’’ DHW outlet G3/4’’ 2° zone flow (optional) G 3/4” 2° zone return (optional) G 3/4” 132 74

723 920

844

780 200

132 74

Condensing gas boilers Platinum FS 32 GA Solar 220

600

200

132 I

70 167 A 720

D E 115 157 245

1375 1274

B F

128,5 C 55 121,5 H 1968

70 40 1378

1410

1236 1160

200

600

132

780 723

A Heating system return G 3/4” B Heating system flow G 3/4” C 844Gas inlet G 1/2” D Condensing trap 24x19 E Cold water inlet G3/4’’

723 920

F DHW outlet G3/4’’ G 2° zone flow (optional) G 3/4” H 2° zone return (optional) G 3/4”

780 132

200

74 1201

844

600

Technical drawings - graphs - flue systems

Condensing gas boilers Luna3 Comfort HT Solar - heating system circuit

600

HEAD mH2O

Luna3 Comfort HT Solar 120, 120 MS, 240, 240 MS 640 600

433,5

273

415

I speed.

I L

FLOW RATE (l/h)

103

95 130 130 E F G A B C D

2056

III speed. II speed.

760 832

190 65105

Luna3 Comfort HT Solar

9085 95 90

HEAD mH2O

frontal view

side view

I speed.

back view

A DHW relief valve outlet G 1/2” B Mains water G 1/2” C DHW recirculation G 1/2” D DHW outlet G 1/2” E Heating system flow G 3/4”

F Gas supply pipe G 3/4” G Heating system return G 3/4” H Solar relief valve outlet G 1/2” I Collector inlet G 3/4” L Collector outlet G 3/4”

III speed. II speed.

FLOW RATE - Solar circuit

Hybrid Systems Prevalenza

HEAD mH2O

Luna Platinum CSI-i

70 70

850

70 70 70 70

frontal view

856

672

back view

side view

Gas G3/4’’

Heating return 2° low temperature zone G1’’

Recirculation G3/4’’

Heating flow 1° low temperature zone G1’’

Cold water inlet G3/4’’

Heating flow 2° low temperature zone G1’’

DHW outlet G3/4’’

Heat pump flow G3/4’’

Heating flow high temperature zone G3/4’’

Heat pump return G3/4’’

Heating return high temperature zone G3/4’’

Solar collector flow G3/4’’

Heating return 1° low temperature zone G1’’

Solar collector return G3/4’’

Portata FLOW RATE Q (l/h)

HEAD mH2O

Prevalenza

Portata FLOW RATE Q (l/h)

Example : pump head 2nd zone with half-open mixing valve

HEAD mH2O

Prevalenza

868

Prevalenza

80 80 80 80 80 80 80 80 80 80 80 80 80

70 70

152

2060

70 70

HEAD mH2O

Portata FLOW RATE Q (l/h)

Zonazone 1 portata 0 rate 0 III 1st flow Zonazone 1 portata 500 l/h 500 l/h II 1st flow rate Zonazone 1 portata 1000 l/h 1000 l/h I 1st flow rate

Portata FLOW RATE Q (l/h)

Hybrid Systems PCIB-i EXTERNAL UNIT 43

327

825

15,3

water inlet

300

658

3/4”

388

water outlet

3/4”

AVAILABLE PRESSURE HEAD (kPa)

Fixing point

PBM-i 6

120 110 100 90 80 70 60 50 40 30 20 10 0

PBM-i 6

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

122,5

357

330

Fixing point

155

540

155

850

882

water inlet

180 110

1”

water outlet 1”

Internal unit for PBM-i (System Manager) 75

333

411

AVAILABLE PRESSURE HEAD (kPa)

PBM-i 10

580

FLOW RATE (l/min)

PBM-i 10 80 70 60 50 40 30 20 10 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40

FLOW RATE (l/min)

Technical drawings - graphs - flue systems

Gas boilers Luna3 Comfort 240 i, 1.240 i

Luna3 Comfort 310 Fi - 1.310 Fi

HEAD mH2O

Luna3 Comfort 240 Fi, 310 Fi, 1.240 Fi, 1.310 Fi

FLOW RATE (l/h)

HEAD mH2O

Luna3 Comfort 240 i - 1.240 i - 1.240 Fi - 240 Fi

FLOW RATE (l/h)

MR Heating system flow G 3/4” US DHW outlet G 1/2” (for heating only models storage tank flow G 3/4”) GAS Gas inlet G 3/4” ES Mains water G 1/2” RR Heating system return G 3/4” A Boiler hanging points. Distance between hanging points: 425 mm B Distance between hanging points and hydraulic connection

Luna3 240 i

188 100

Luna3 310 Fi - 1.310 Fi - 280 Fi - 240 Fi - 240 i

HEAD mH2O

Luna3 240 Fi, 280 Fi, 310 Fi, 1.310 Fi

FLOW RATE (l/h)

Gas boilers Luna3 Comfort Air 250 Fi HEAD mH2O

Luna3 Comfort Air 250 Fi - 310 Fi

FLOW RATE (l/h)

MR Heating system flow G 3/4” US DHW outlet G 1/2” GAS Gas inlet G 3/4” ES Mains water G 1/2” RR Heating system return G 3/4” A Boiler hanging points. Distance between hanging points: 425 mm B Distance between hanging points and hydraulic connection

Luna3 Comfort + Combi 240 Fi, 310 Fi HEAD mH2O

Luna3 Comfort + Combi 240 Fi - 310 Fi

FLOW RATE (l/h)

frontal view

A B C E F G I

side view

Heating system flow G 3/4” M Heating system return G 3/4” M Gas inlet G 3/4” M Mains water G 1/2” M DHW outlet G 1/2” M DHW recirculation G 1/2” M DHW relief valve outlet

back view

view from above

Technical drawings - graphs - flue systems

Gas boilers Luna Platinum + Combi 80 L+

HEAD mH2O

Luna Platinum + Combi 80 L+

max min

FLOW RATE (l/h)

A B C E F G H I

Heating system flow G 3/4” M Heating system return G 3/4” M Gas inlet G 3/4” M Mains water G 1/2” M DHW outlet G 1/2” M DHW recirculation G 1/2” M Condensing trap possible to connect on pipe Ø 21 DHW relief value outlet

Luna Duo-tec + Combi 80 L+

HEAD mH2O

Luna Duo-tec + Combi 80 L+

max min

FLOW RATE (l/h)

A B C E F G H I

Gas boilers Luna3 Blue 180 i - 1.180 i - 240 i

Luna3 Blue 180 i, 240 i, 1.180 i

188 100

HEAD mH2O

Luna3 Blue 240 Fi, 280 Fi, 1.240 Fi

III speed.

II speed. FLOW RATE (l/h)

HEAD mH2O

Luna3 Blue 240 Fi - 1.240 Fi

III speed. II speed. FLOW RATE (l/h)

MR Heating system flow G 3/4” US DHW outlet G 1/2” (for heating only models storage tank flow G 3/4”) GAS Gas inlet G 3/4” ES Mains water G 1/2” RR Heating system return G 3/4”

A B C

Boiler hanging points. Distance between hanging points: 425 mm Distance between hanging points and hydraulic connection Ø 110: 180 i – 1.180 i Ø 130: 240 i

HEAD mH2O

Luna3 Blue 280 Fi

III speed. II speed.

I speed. FLOW RATE (l/h)

Luna3 Comfort Max 250 Fi, 310 Fi HEAD mH2O

Luna3 Comfort Max 310 Fi

I speed.

III speed. II speed.

FLOW RATE (l/h)

HEAD mH2O

Luna3 Comfort Max 250 Fi

II speed. FLOW RATE (l/h)

MR Heating system flow G 3/4” US DHW outlet G 1/2” GAS Gas inlet G 3/4” ES Mains water G 1/2” RR Heating system return G 3/4”

A B

Boiler hanging points. Distance between hanging points: 425 mm Distance between hanging points and hydraulic connection

III speed.

Technical drawings - graphs - flue systems

Gas boilers Nuvola3 Comfort 240 i, 280 i

Nuvola3 Comfort 140 Fi - 240 Fi/i

HEAD mH2O

Nuvola3 Comfort 140 Fi, 240 Fi, 280 Fi, 320 Fi

Ø100

FLOW RATE (l/h)

HEAD mH2O

Nuvola3 Comfort 280 Fi/i - 320 Fi

FLOW RATE (l/h)

1 2 3 4 5

DHW outlet G 1/2” Mains water G 1/2” Heating system return G 3/4” Heating system flow G 3/4” Gas inlet G 3/4”

bottom view

Nuvola3 BS 40 240 i, 280 i

Nuvola3 BS 40 140/240

HEAD mH2O

Nuvola3 BS 40 140 Fi, 240 Fi, 280 Fi

Ø100

FLOW RATE (l/h)

Nuvola3 BS 40 280

HEAD mH2O

5 4 3 2 1 0

FLOW RATE (l/h)

1 2 3 4 5

Heating system flow G 3/4” DHW outlet G 1/2” Mains water G 1/2” Heating system return G 3/4” Gas inlet G 3/4”

bottom view

Gas boilers Luna3 Silver Space 250 Fi, 310 Fi HEAD mH2O

Luna3 Silver Space 250 Fi - 310 Fi

FLOW RATE (l/h)

MR Heating system flow G 3/4” US DHW outlet G 1/2” GAS Gas inlet G 3/4” ES Mains water G 1/2” RR Heating system return G 3/4” A Boiler hanging points. Distance between hanging points: 524 mm B Distance between hanging points and hydraulic connection

Ecofour 24 F, 1.14 F, 1.24 F

Ecofour 24, 1.14, 1.24

EcoFour

HEAD mH2O

400

162

122

Ø120 (24 kW) Ø110 (14 kW)

FLOW RATE (l/h)

B 680

730

A 23

Ø100

65 65

70 65

9 14 5,5 2,5

MR Heating system fl ow G 3/4” US DHW outlet G 1/2” GAS Gas inlet G 3/4” ES Mains water G 1/2” RR Heating system return G 3/4”

A B

65 65

Boiler hanging points. Distance between hanging points: 343 mm Distance between hanging points and hydraulic connection

Technical drawings - graphs - flue systems

Gas boilers Eco Compact 14 F, 18 F, 24 F, 1.14 F, 1.24 F 400

Eco Compact 24, 1.24 0 40

Eco Compact

184 Ø100

HEAD

A 68

A 23

Ø120 (24 kW) Ø110 (14 kW)

400

600

800

1000

1200

730

FLOW RATE (l/h) B 680

700

200

B623

6 5,5 5 4,5 4 3,5 3 2,5 2 1,5 1 0,5

(mH2O)

162

5 65 6 70

70 70

1 16 05 2

MR US GAS ES RR

9 14 5,5 2,5

Heating system flow G 3/4” DHW outlet G 1/2” (24F) (for heating only models, tank flow G 3/4”) Gas inlet G ¾” Mains water G 1/2” Heating system return G 3/4”

A B

Boiler hanging points. Distance between hanging points: 246 mm Distance between hanging points and hydraulic connections

Main5 24 F, 18 F, 14 F Main5

184

Ø100

HEAD mH2O

400

700

FLOW RATE (l/h)

MR Heating system fl ow G 3/4” US DHW outlet G 1/2” GAS Gas inlet G 3/4” ES Mains water G 1/2” RR Heating system return G 3/4” A Boiler hanging points.

Gas boilers Slim 1.230 Fi, 1.300 Fi Slim 2.300 Fi - 2.230 i - 2.300 i - 1.150 i 1.230 i - 1.300 i - 1.230 Fi - 1.300 Fi

116 119 115

520 - 600

350

HEAD mH2O

A 850

I speed.

481 - 564 596 - 676

frontal view

side view

III speed.

II speed.

0 0,2 0,4 0,6 0,8 1,0 1,2 1,4 1,6 1,8 2,0 2,2 2,4

FLOW RATE (l/h)

A Heating system flow G 3/4” M B Heating system return G 3/4” M C Gas supply pipe G 1/2” M

back view

Slim 1.230 FiN, 1.300 FiN 542 - 622 520 - 600

A C B 481 - 561 507 - 587

side view

back view

Slim 1.150 i, 1.230 i, 1.300 i

Slim 1.230 iN, 1.300 iN

Slim 1.400 iN, 1.490 iN, 1.620 iN

Slim 1.150i Slim 1.230i, 1.230iN Slim 1.300i, 1.300iN

520 600 680

dimensions (mm)

Slim 1.400iN Slim 1.490iN Slim 1.620iN

1490 1490 1650

635 715 875

dimensions (mm) L2

frontal view

Slim 2.300 Fi

side view

frontal view

side view

back view

Slim 2.230 i, 2.300 i

A Heating system flow G 3/4” M B Heating system return G 3/4” M C Gas supply pipe G 1/2” M D Mains water G 1/2” M E DHW outlet G 1/2” M F Recirculation G 1/2” M (Slim 2.260 Fi) Recirculation G 1/2” F (Slim 2.230 i, 2.300 Fi) back view

back view

side view

frontal view

Technical drawings - graphs - flue systems

Gas boilers - solid fuel boilers Slim HPS 1.80, 1.99, 1.110

R Heating system return 11/2” M Heating system flow 11/2” G Gas inlet 1” S Boiler drain 3/4”

1.80

1.99

1.110

940

1140

1240

180

225

250

645

670

415

400

Slim EF 1.22, 1.31, 1.39, 1.49, 1.61

1.22

1.31

595

720

130

150

Connections R Heating system return 1 1/2” M Heating system flow 1 1/2” G Gas connection 1/2”

1.39

1.49

670

770

1.61 870

1435

1675

245

295

345

180

200

Connections R Heating system return 1 1/4” M Heating system flow 1 1/2” G Gas connection 3/4”

BPI Eco 347

211

S 155

192

1023

1001

825

392

ø 147

176 500

Coaxial flue system Luna Platinum, Luna Duo-tec, Duo-tec Compact, Duo-tec Max, Nuvola Platinum, Nuvola Duo-tec, Luna3 Comfort HT Solar, Platinum FS

L max= 10 m 25 m

n Ø 60/100 mm n Ø 80/125 mm

L max= 10 m 25 m

L max= 9 m 24 m L max= 10 m 25 m

998

345

L max= 10 m 25 m

345

405

998

345

998

L max= 9 m 24 m

L max= 10 m 25 m

L max= 9 m 24 m

L max= 8 m 23 m LAS chimney

Tubes maximum length (m) Ø 60/100

Ø 80/125

Luna Platinum - Luna Duo-tec Duo-tec Max

Length reduction for a 45° bend insertion (m)

0,5

Luna Platinum/Duo-tec + Combi

177

Duo-tec Compact

238

338

124

131 min

140,5

131 min

177

Length reduction for a 90° bend insertion (m)

450

345

450

540

frontal view

side view

frontal view

side view

400

Luna3 Comfort HT Solar

Nuvola Platinum - Nuvola Duo-tec

273

433,5

156,5 112 min

119 600

side view

Chimney terminal for gas condensing boilers

frontal view

600

640

frontal view

side view

274

466

side view

263,8

171

181

299

frontal view

1150

Platinum FS 140,5

131 min

400

ø 60 ø 100

600 frontal view

662 side view

Vertical coaxial flue terminal Ø 60/100 mm KUG 71413581

Technical drawings - graphs - flue systems

Coaxial flue system Luna3 Comfort - Luna3 Comfort + Combi - Luna3 - Luna3 Comfort Air - Luna3 Blue Luna3 Comfort Max - Luna3 Silver Space - Ecofour - Eco Compact - Main5 L max

L max

998

405

345

998

345

998

LAS chimney

L max

Lmax can change according to the flue type and boiler models. See the instruction manual.

Horizontal flue Vertical chimney

Luna3 24/25 kW Luna3 28/31 kW Luna3 Blue Ecofour - Eco Compact - Main5 Luna3 Luna3 Blue Ecofour - Eco Compact - Main5

Luna3 Comfort - Luna3 Comfort Air Luna3 Blue - Luna3 Comfort Max

Ø 80/125

5 4 4 5 4 4 5

9 8 - 10 -

0,5

Luna3 Comfort + Combi 100

188

450

frontal view

Length reduction for a 45° bend insertion (m)

345

450

550

side view

frontal view

side view

Ecofour

Luna3 Silver Space

398

143 min

100

Ø 60/100

Length reduction for a 90° bend insertion (m)

Eco Compact

100

143 min

Tubes maximum length (m)

226

324

frontal view

250

side view

Main5

122 120

114

184

400

299

frontal view

side view

400

frontal view

side view

299

frontal view

Coaxial flue system Nuvola3 Comfort - Nuvola3 BS 40 n Ø 60/100 mm n Ø 80/125 mm

L max= 4 m 8m

L max= 3 m 7m L max= 3 m (320 Fi)

L max= 4 m 8m

L max= 3 m 7m L max= 2 m (320 Fi)

L max= 3 m (320 Fi) LAS chimney

998

345

998

345

405

998

L max= 3 m (320 Fi)

L max= 4 m 10 m

L max= 3 m 9m

L max= 2 m 8m

Tubes maximum length (m) 100

150

Ø 60/100

Ø 80/125

24/28 kW

flue

14 kW

32 kW

120 min.

Horizontal

600

466

frontal view

Vertical chimney

side view

Length reduction for a 90° bend insertion (m)

Length reduction for a 45° bend insertion (m)

0,5

Slim L max= 3 m

L max= 4 m

L max= 5 m

LAS chimney L max= 4 m

L max= 3 m

345

998

998 405

345

998

L max= 3 m

L max= 3 m L max= 3,5 m L max= 4 m

L max= 4 m

Slim 1.230 Fi/FiN, 1.300 Fi/FiN

Slim 2.300 Fi 100

above view

234

Tubes maximum length (m)

100

100 116

102 min.

234

102 min. 102 min.

102 min.

100

416

side view

above view

side view

Length Length reduction reduction for a 90° for a 45° bend insertion bend insertion (m) (m) 1

0,5

Ø flue mm

60 - 100

Technical drawings - graphs - flue systems

Dual flue system Luna Platinum, Luna Duo-tec, Duo-tec Compact, Duo-tec Max, Nuvola Platinum, Nuvola Duo-tec, Luna3 Comfort HT Solar, Platinum FS L1 = INTAKE PIPE / L2 = FLUE PIPE

L2=5 m (Ø 80)

500 1150

1150 500

L1=30 m (Ø 50)

L1 max = 30 m Ø 50 L2 max = 5 m Ø 80

(L1 + L2) max = 80 m L2 max = 15 m

Tubes maximum length (m) Installation with dual flue chimney terminal Ø 50* (Luna Platinum and Duo-tec boilers, 24 kW models) Installation with dual flue chimney terminal Ø 80

Length reduction for a 90° Length reduction for a 45° bend insertion (m) bend insertion (m)

L1 30

L2 -

L1 4

L2 -

L1 2

L2 -

0,5

0,25

*The installation with flue Ø 50 requires the adjustment of the fan speed parameters

Tubes maximum length (m)

Length reduction for a 90° bend insertion (m)

Length reduction for a 45° bend insertion (m)

Installation with terminal Ø 60

1,25

Installation with terminal Ø 80

0,5

0,25

Installation with chimney terminal

0,5

0,25

Luna Platinum - Luna Duo-tec Duo-tec Max 110

110

140,5

159

177 450

345

frontal view

side view

Nuvola Platinum - Nuvola Duo-tec 110 89 110

177

110 120 110

side view

Luna Platinum/Duo-tec + Combi 110

181

120

110

156,5

177

600

466

600

frontal view

side view

frontal view

Duo-tec Compact 110 120 110

338

159

148

140,5

frontal view

with adjustable dual flue kit

181

110

450

188

191

120

134

120

198

110

with adjustable dual flue kit

frontal view

side view

Luna3 Comfort HT Solar

side view

Platinum FS GA

124

110 120 110 110 120 110

198 134

159 min.

198 134

600

400

299

frontal view

side view

124

433,5

327

238

540

450

466

frontal view

200 640

side view

400 600 frontal view

662 side view

Flexible ducting systems gas condensing boilers KHG71409351

KHG71409351

KHG71409361

KHG71411121 KHG71410571 (1,5 m)

KHG71410571 (1,5 m)

KHG71410581 (20 m)

KHG71410621

KHG71405921

KHG71405991

KHG71410591 drain condensate

KHG71410601

KHG71405911

Chimney terminal for gas condensing boilers

130

Ø 126 Ø 81,5

Ø 60 1150

Ø 100

484

KHG 71409391 Reduction kit from Ø 80/125 to Ø 60/100

200

138

Ø 126

Ø 80 Ø 125

KHG 71409351 Coaxial vertical chimney terminal Ø 80/125

Ø 80

KHG 71409381 Dual flue tubes adapter for coaxial chimney from Ø 80/80 to Ø 80/125

Technical drawings - graphs - flue systems

Dual flue system Luna3 Comfort - Luna3 - Luna3 Comfort + Combi - Luna3 Comfort Air - Luna3 Blue - Luna3 Comfort Max Luna3 Silver Space - Ecofour - Eco Compact - Main5 L1

960

L max

300

Luna3 Comfort

Luna3 Blue

Main5 Ecofour

Eco Compact

31 kW

(L1+L2) Max m

L2 Max m

Luna3 Blue

25 kW

31 kW

L Max m

1150 500

*B22

31 kW

25 kW 30 (G20) 25 (G31) 10

Luna3 Comfort

500 1150

25 kW

Luna3 Silver Space*

Luna3 Comfort 25 kW

31 kW

L Max m

Luna3 Blue

Ecofour

Eco Compact

Main5

Luna3 Comfort 25 kW

31 kW

L Max m

Luna3 Blue

Ecofour Fourtech

Main5

If the pipe length is longer than 6 meters the condensation collector kit must be installed. Length reduction for a 90째 bend insertion 0,5 m. Length reduction for a 45째 bend insertion 0,25 m

188

120

450

frontal view

side view

Luna3 Silver Space

226

frontal view

120 226

120 450

frontal view

550

side view

130

122

324

frontal view

145

Eco Compact

frontal view

398

120

120 324

450

120

Ecofour

143 min

345

145

143 min

120

143 min

Luna3 Comfort + Combi

143 min

Luna3 Comfort - Luna3 - Luna3 Comfort Air - Luna3 Blue Luna3 Comfort Max

Front view

250 =

side view

400

= 400

frontal view

299

side view

Main5

side view

frontal view

side view

Dual flue system Nuvola3 Comfort - Nuvola3 BS 40 L1 650 1150

960

300

650 1150

(L1 + L2) max= 30 m (25 m - 320Fi)

L max= 15 m - 10 m (mod. Comfort)

L max= 15 m

153 120

94 94

135 min.

Length reduction for a 90° Length reduction for a 45° bend insertion (m) bend insertion (m)

frontal view

Ø Flue (mm)

Installation with proof terminal

0,5

0,25

Installation with chimney terminal

0,5

0,25

133

side view

960 300

500

500 1150

L max=5,5 m

1150

Slim

L max=4,5 m

FLUE PIPE (L1) MAXIMUM LENGTH WITH A 90° BEND: 10 m. INTAKE PIPE (L2) MAXIMUM LENGTH WITH A 90° BEND: 10 m. Length reduction for a 45° bend insertion (m)

Ø Flue (mm)

0,5

0,25

0,5

0,25

Slim 1.230 Fi/FiN, 1.300 Fi/FiN 97

133

Slim 2.300 Fi

119 115

101,5 min

Installation with chimney terminal

Length reduction for a 90° bend insertion (m)

101,5 min

Installation with proof terminal

Tubes maximum length (m)

119 234

235

above view

525

998

467

Chimney terminal for gas boilers

Ø 100

KHG 71401061 Dual flue horizontal chimney terminal Ø 80/125

Ø 60

416

KHG 71403641 Vertical chimney terminal for coaxial flue system Ø 60/100

KHG 71403651 Dual flue vertical chimney terminal Ø 80/125

Technical drawings - graphs - flue systems

Collectors for forced natural draft installation SB 25 + V SB 25 + O

SB 20 + V SB 20 + O

0,9 0,8 0,7 0,6

SB25+O

SB25+V

0,5 0,4 0,3 0,2 0,1 0

(*)

0,9 0,8 0,7 0,6 SB20+V

0,5

h x w x d (mm)

SB 25 + V SB 25 + O SB 20 + V SB 20 + O

2187 1147 1755 1148

1147 2187 1148 1755

0,4

0,2 0,1 0

SB 100

h x w x d (mm)

SB 100

SVB HP

SB20+O

0,3

87 87 87 87

2064

4896

114

SVB 26

(*)

SVB HP - SVB 26

SVB HP SVB 26

h x w x d (mm)

SVB HP SVB 26 s

1965 1560

71 1647

80 107

dimensions are referred to a single tube

SB 21+

0,9 0,8 0,7 0,6 0,5 0,4 0,3 0,2

SB 21+

0,1

h x w x d (mm) 1753

1147

0.0

0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.10

(*) I = total incidental radiation on the collector surface (W/m2) tm = average temperature of the absorbing surface (째C) ta = room temperature (째C)

(*)

Indirect cylinders LUNA UB INOX LUNA UB 80, 120

SLIM UB INOX SLIM UB 80, 120

A B

Connection heating system flow/indirect cylinder 3/4”M Connection indirect cylinder return/heating system 3/4” M

C D E F

Mains water 1/2” M Domestic hot water outlet 1/2” M Relief valve 1/2” F Recirculation 1/2” M

G = 45 mm (80 l) 120 mm (120 l) H = 450 mm (80 l) 600 mm (120 l)

450

LUNA PLATINUM + COMBI 80 L+

450

95 65 65

450

130

95 65 65

540

frontal view

132

62 65 95

132

62 65 95

132

62 65 95

130

85 145

62 65 95

85 145

132

130

338

85 145

130

338

130

338

85 145

153 273

120

153 177

273

120

130 153

177

130

120

273

177

153 273

540 back view

A B C E F G H I

Heating system flow G 3/4” M Heating system return G 3/4” M Gas inlet G 3/4” M Mains water G 1/2” M DHW outlet G 1/2” M DHW recirculation G 1/2” M Condensing trap possible to connect on a pipe Ø 21 DHW relief valve outlet

120 177

A B C E F G I

= frontal view

1.240 Fi - 1.310 Fi - 1.240 i models

side view

back view

A I

22 915 954

915

1016

954

227.5

LUNA3 COMFORT + COMBI

130

B F

227.5

540

side view

B F

602 540

Luna Duo-tec 1.12 GA - 1.24 GA - 1.28 GA models

95 65 65

1016

954

1016

LUNA DUO-TEC + COMBI 80 L+

602

1642

Luna Platinum 1.12 GA - 1.18 GA - 1.24 GA - 1.32 GA models

450

130

1642

= 1642

450

Heating system flow G 3/4” M Heating system return G 3/4” M Gas inlet G 3/4” M Mains water G 1/2” M DHW outlet G 1/2” M DHW recirculation G 1/2” M DHW relief valve outlet

Technical drawings - graphs - flue systems I

11 1

Indirect cylinders

12 2

200 SC - 300 SC - 400 SC

UBVT 300 SC

UBVT 400 SC

287

286

304

753

887

858

70.5

66.3

1080

1397

1214

1323.5

1694

1560

1422.5

1795.5

1671.5

I (Ø)

610

710

10 H

7 F E

550

591

3 20°

20°

4 H

45°

27°

30°

45°

30°

27°

5 G

UBVT 500 DC

287

286

304

302,6

753

887

858

948

70,5

66,3

900

1127

994

1133

1080

1397

1219

1358

1170

1487

1309

1448

1323,5

1694

1560

1665,7

1422,5

1795,5

1671,5

1787

I (Ø)

610

710

760

550

A C

UBSS SC/DC 2

UBVT 400 DC

8 6

UBVT 300 DC

UBVT 200 DC

12 2

UBVT 200 SC

7 Solar exchanger inlet G1 8 Solar exchanger outlet G1 9 Solar sensor positioning 10 Electrical resistance seat 11 Magnesium anode 12 Thermometer

200 DC - 300 DC - 400 DC - 500 DC I

Domestic hot7water outlet G1 Recirculation G¾ Exchanger inlet9 G1 Domestic hot water sensor G1 Exchanger outlet G1 8 Domestic cold water inlet 6 + Drain opening G1 C

1 2 3 4 5 6

UBVT 200 DC/SC UBVT 300 DC/SC UBVT 400 DC/SC UBVT 500 DC

1821

1752

1 DHW oultet 3/4” 2 Recirculation 1/2” 3 Upper coil inlet 3/4” 4 Upper coil outlet 3/4” 5 Upper coil temperature sensor 6 Electric resistance (optional) 7 Solar coil inlet 3/4” 8 Solar coil outlet 3/4” 9 Cold water inlet 3/4” 10 Solar coil temperature sensor

1440

1376 1140

371 413

371

413

UBSS 250 DC DOPPIA SERPENTINA

UBSS 260 SC SINGOLA SERPENTINA

UB 200 SOLAR Boiler DHW inlet Boiler DHW outlet Cold water inlet DHW outlet DHW recirculation Boiler drain Solar collectors flow Solar collector return frontal view

UBSI 300 UBSI 500

side view

back view

1 2 3 4 5 6 7 8 9

Lower coil outlet 3/4” Lower coil inlet 3/4” Thermometer Anode D33 mm DHW outlet 1” Upper coil outlet 1” Recirculation 3/4” Upper coil inlet 1” Cold water inlet 1”

Capacity Dimensions A B C E F G I K L d D Insulation Insulation thickness

lt mm mm mm mm mm mm mm mm mm mm mm mm

UBSI 300

UBSI 500

300

500

1574 1536 312 313 1899 1983 1796 1787 1694 1666 1487 1448 1397 1358 1127 1133 71 71 604 754 922 1069 injected polyurethane 50 50

Indirect cylinders UB 800 DC UB 1000 DC UB 1500 DC UB 2000 DC

Model 3

UB 800 DC

UB 1000 DC UB 1500 DC UB 2000 DC

Dimensions

A 7 10 9

H N

M L

935

1085

1200

1340

1465

1720

1770

2000

435

440

500

550

210

260

335

350

385

400

7 J

875

985

1095

1205

1055

1245

1275

1425

O G

965

1120

1185

1315

1180

1395

1370

1485

1365

1560

1680

1870

1455

1700

1820

1990

535

510

495

660

F 9 D d

120°±5°

° 30°±5

120

207

1 DHW outlet 1” 1/4 2 Anode 1” 1/2 3 Thermometer 1/2” 4 Electric resistance 1” 1/2 5 Cold water inlet 1” 1/4 6 Lower coil inlet 1” 1/4 7 Sensor 1/2” 8 Lower coil outlet 1” 1/4 9 Recirculation 1” 10 Upper coil inlet 1” 1/4 11 Upper coil outlet 1” 1/4

200

230

790

1000

1100

Heigth (including insulation)

1855

2105

2185

2470

1780

2030

2120

2405

990

1200

Flange

UB 1000 SC UB 2000 SC

1300 290/220

soft soft soft soft polyurethane polyurethane polyurethane polyurethane

Insulation Insulation thickness

180/120

100

Model

UB 1000 SC

UB 2000 SC

440

550

Dimensions 9

A 7 8

H K

B J

I L

6 G

D d

3515 (40mm FLANGIA COLLARINO DIRITTO)

300150

DHW outlet 1” 1/4 Anode 1” 1/2 Thermometer 1/2” Electric resistance 1” 1/2 Cold water inlet 1” 1/4 Lower coil inlet 1” 1/4 Sensor 1/2” Lower coil outlet 1” 1/4 Recirculation 1”

1720

2000

1350

1540

210

260

350

520

555

730

1395

1600

1535

1750

1700

1990

1235

1430

200

230

790

1100

Heigth (including insulation)

2105

2470

2030

2405

990

1300

Flange

180/120

290/220

soft polyurethane

100

Insulation 2

B C

1 2 3 4 5 6 7 8 9

Insulation thickness

Technical drawings - graphs - flue systems

Indirect cylinders UBPU 300 UBPU 500

Model

2 2

UBPU 300

UBPU 500

Dimensions A

785

925

120

135

235

240

830

970

1340

1610

600

500

Heigth (including insulation)

1560

1840

1560

1840

injected polyurethane

9 9

F H F 3

6 8

D d

Insulation Insulation thickness

° 5°

°±

Dump Boiler/heating system flow Boiler/heating system return Thermometer Sensor Electric resistance Drain Free connection

UBPU 500 1” 1/4 2” 1/2 2” 1/2 1/2” 1/2” 1” 1/2 3/4” 2” 1/2

30°±5

2 3 5 6 7 8 9

UBPU 300 1” 1/4 2” 2” 1/2” 1/2” 1” 1/2 3/4” -

UBPU 500 SC UBPU 800 SC UBPU 1500 SC 1

3-4

K I

3 3

G A B 7 D d

25°±5° ±5°

45°

UBPU 500 SC

UBPU 800 SC

UBPU 1500 SC

Dimensions

Model

±5

45°

1 Dump 1”1/4 2 Boiler/heating system flow 1”1/2 3 Boiler/heating system return 1”1/2 4 Electric resistance1”1/2 5 Stratifier 6 Lower coil outlet 1” 7 Lower coil inlet 1” 8 Sensor 1/2” 9 Termometer 1/2”

710

715

850

330

335

390

930

1045

1290

1090

1095

1310

1470

1475

1770

850

990

1200

650

790

1000

Heigth (including insulation)

1775

1800

2165

1700

1725

2090

Insulation Insulation thickness

soft polyurethane soft polyurethane soft polyurethane mm

100

Entrata acqua fredda 1”

Sonda 1/2”

Anodo 1”1/4

Ricircolo 1”

Mandata acqua calda 1”

350

Indirect cylinders

Sfiato 1/2”

Termometro 1/2”

Mandata riscaldamento alta T° 800

UBTT 300

Cold water inlet 1”

Mandata energia solare 3/4”

Sensor 1/2”

Anode1”1/4

1315

Mandata riscaldamento bassa T°

1055

Entrata acqua fredda 1”

Sonda 1/2” Ritorno riscaldamento alta T° 1” 1/2

Anodo 1”1/4

Ricircolo 1”Sonda solare 1/2”

Mandata acqua calda 1” 650 500

Sfiato 1/2”

800

420

1315

300 225 135

1055

350

Sensor 1/2”

780 700 650 500

800 1315

420 300 225 135

450

120

Solar circuit return 3/4”

450

Ritorno energia solare 3/4” Resistenza elettrica 1”1/2

450

Q 120

300

Ø545

450

120

6 F

Ø545

450

3 4

9 9

Q P

L 6 F

13 220±5

D d

M 7

D d

3 15

Electric resistance 1”1/2

UBTT 300

UBTT 600

UBTT 1000

lt mm mm mm mm mm mm mm mm mm mm mm mm mm mm

170 135 300 420 650 1055 700 225 500 780 225 1055 600

170 240 330 595 880 1235 1450 1055 340 590 890 950 1160 1450 750

220 240 330 595 880 1440 1745 1290 360 640 910 1050 1190 1695 790

1315

1775

2050

mm mm mm

1315 700 120 injected polyurethane 50

1710 950 290/220 soft polyurethane 100

1985 990 290/220 soft polyurethane 100

Ritorno pompa di calore 1”1/2

Ø360

3 120

700 600

300

135

700 600

Drain 3/4”

120

420 300 225

1 Dump 1/2” 2 Thermometer 1/2” 3 Sensor 1/2” 4 Solar circuit flow 1” 5 Solar sensor 1/2” 6 Solar circuit return 1” 7 Drain 3/4” 8 Heating circuit return 1 1/2” 9 Free connection 1 1/2” 10 Electric resistance 1 1/2” 11 Heating circuit flow 1 1/2” 12 Cold water inlet 1” 13 Recirculation 1” 14 Anode 1 1/4” 15 DHW outlet 1”

Ø545

450

Scarico 3/4”

Mandata pompa di calore 1”1/2

120

300

1055 780 700 650 500

Heat pump return 1”1/2

Sonda solare 1/2”

Heat pump flow 1”1/2

Boiler return 1”1/2

Mandata caldaia 1”1/2

Ritorno riscaldamento alta T° 1” 1/2

Ritorno caldaia 1”1/2

Solar sensor 1/2”

Ritorno energia solare 3/4”

Low temperature heating zone return T° 1”1/2

Ritorno riscaldamento bassa T° 1”1/2

Boiler flow 1”1/2

Resistenza elettrica 1”1/2

290±5

Ø360

Ritorno pompa di calore 1”1/2

Termometro 1/2” Scarico 3/4”High temperature heating zone return 1” 1/2

Ø360

Ritorno caldaia 1”1/2

Solar circuit flow 3/4”

Low temperature heating zone flow

Sonda 1/2”

Thermometer 1/2”

High temperature heating zone flow

Ritorno riscaldamento bassa T° 1”1/2

Mandata riscaldamento bassa T°

Mandata pompa di calore 1”1/2

350

780 700

700 Mandata energia solare 3/4” 600

290±5

Dump1/2”

Mandata caldaia 1”1/2

Sonda 1/2”

Mandata riscaldamento alta T°

UBTT600 UBTT 1000

Recirculation 1”

DHW outlet 1”

Dimensions Capacity (DHW) B C E F I K L M N O P Q R d Heigth (including insulation) H D Flange Insulation Insulation thickness

220±5

UBPT 1000

1 Dump 1” 2 Boiler flow 1 1/2” 3 Thermometer 1/2” 4 Sensor 1/2” 5 Heating circuit flow 1 1/2” 6 High temperature heating zone return 1 1/2” 7 Boiler return 1 1/2” 8 Generator flow 1 1/2” 9 Sensor 1/2” 10 Sensor 1/2” 11 Generator return 1 1/2”

12 Low temperature heating zone return 1 1/2” 13 Cold water inlet 1 1/4” 14 Solar circuit return 1” 15 Sensor 1/2” 16 Solar circuit flow 1” 17 Electric resistance 1 1/2” 18 Generator return 1” 19 Sensor 1/2” 20 Generetor flow 1 1/2” 21 DHW outlet 1”

UBPT 1000 Capacity (DHW)

DHW corrugate steel pipe surface

7,6

Insulation Insulation thickness

soft polyurethane mm

100

Technical drawings - graphs - flue systems

Electric water heaters 10-15 lt, above and under sink

under sink hot water

above sink

Capacity

A/H

Ă&#x2DC;

R 501 SL

456

255

238

218

R 501

456

255

166

290

R 515 SL

399

338

235

164

R 515

399

338

163

236

cold water

Capacity

R 501 SL

262

184

R 501

262

184

R 515 SL

345

184

R 515

345

184

dimensions (mm)

Electric water heaters STORAGE horizontal 80/100 lt

upright 30/50/80/100 lt

Capacity

A/H

Ă&#x2DC;

V 530

623

338

423

V 550

585

433

380

451

V 580

814

433

585

451

V 510

100

973

433

785

451

O 580

789

433

395

451

O 510

100

948

433

555

451

V 580 TD

814

433

585

451

V 510 TD

100

973

433

785

451

V 580 TS

814

433

585

451

V 510 TS

100

973

433

785

451

Capacity

V 530

350 100/320 240/272

V 550

165 100/320 240/272

V 580

165 100/320 240/272

V 510

100

165 100/320 240/272

O 580

234

365 240/272

365

O 510

100

234

V 580 TD

165 100/320 240/272 251

206

V 510 TD

100

165 100/320 240/272 251

206

V 580 TS

165 100/320 240/272 251

206

V 510 TS

100

165 100/320 240/272 251

206

dimensions (mm)

240/272

Technical drawings - graphs - flue systems

Gas water heaters SAG2 50 - 80 - 100

MODEL

SAG2 50

460

613

313

SAG2 80

710

863

518

SAG2 100

830

983

638

SAG2 125 T - 155 T - 195 T

SAG3 300 T

MODEL

A (±3)

B (±3)

SAG2 125 T

1150

1250

SAG2 155 T

1320

1420

SAG2 195 T

1590

1730

MODEL

SAG3 300 T

1700

1500

700

600

375

845

1235

140

620

100

1” 1/4

INLET COLD WATER 1 - SHUT OFF VALVE 2 - PRESSURE REDUCER 3 - SAFETY VALVE 4 - EXPANSION VESSEL

HOT WATER OUTLET

DRAIN CONNECTION – ½” 5 - DRAIN VALVE

RECIRCULATION FITTING

Gas instantaneous water heaters 13i / 11i

543

542

585

483

O 1 32

57 155

65 220

36 0

frontal view

lateral view

13Fi / 11Fi 98

482 562 585

562 585

482

O60

G1/2

G1/2 30 366

frontal view

G1/2 155

G1/2

G1/2 220

165

G1/2 39 57

lateral view

G1/2 30 366

G1/2 155

G1/2

Technical drawings - graphs - flue systems B

690

Floor standing heat pump water heaters ø200

SPC 200 - SPC 300

690

ø200

7 1

2000

690

2 1375

1690 mm (SPC 200) - 2000 mm (SPC 300) 690 mmø200 ø200 DHW outlet G 3/4” Electric resistance 7 Cold water inlet G 3/4” Condensation drain PVC Ø16 x 12 mm 3

4(1) 600 2000

1460

A B 1 2 3 7

1460

ø200

658 6

4(1)

300

600

2 1375

658

690

690 3

4(1)

300 2

2000

ø200 7 3

1 2 3 4 5 6 7

50°

ø200

2000

4(1)

600ø200

ø200

690 1460

50°

SPC 300 S

4(1)

600 ø200

ø200

1375

DHW outlet G 3/4” 2 4 5Electric resistance Cold water inlet G 3/4” Water exchanger inlet G 3/4” 658 Water exchanger sensor G 3/4” 6 Water exchanger outlet G 3/4” Condensation drain PVC Ø16 x 12 300mm 3

4(1)

600

600 2 1375

658 1 2

4(1)

3 50°

300 2

600 1

Accessories for gas condensing and gas boilers Flue Systems - Coaxial flue 83

- Dual flue - Flexible ducting system - Special accessories

85 87 87

Other accessories - Replacement kit 88

- Installation templates - Solar integration

88 88

Hydraulic accessories 90 Outdoor installation accessories 92

Thermoregulation accessories

Mixing systems accessories 96 Other accessories 97

Flue pipe accessories Coaxial flue system for gas condensing boilers Description

Code

PP coaxial flue pipes with terminal Ø 60/100 L=750 mm supplied with windproof terminal and sealing collar

KHG 71405961

PP coaxial flue pipe extension Ø 60/100 L=1000 mm

KHG 71405951

Coaxial flue pipe extension L=500 - Ø 60/100

KHG 71411981

PP coaxial flue pipe extension with checking profile - Ø 60/100

KHG 71411951

PP coaxial 90° bend Ø 60/100

KHG 71405971

Coaxial 90° bend with checking profile - Ø 60/100

KHG 71411931

PP coaxial 45° bend Ø 60/100

KHG 71405981

PP coaxial flue pipes with terminal Ø 80/125 L=1000 mm supplied with windproof terminal and sealing collar

KHG 71408891

PP coaxial flue pipe extension Ø 80/125 L=1000 mm

KHG 71408851

PP coaxial flue pipe extension Ø 80/125 L=500 mm

KHG 71408861

PP coaxial 90° bend Ø 80/125

KHG 71408871

PP coaxial 45° bend Ø 80/125

KHG 71408881

Internal sealing collar Ø 100

KHG 71401771

PP vertical chimney terminal Ø 80/125*

KHG 71409351

PP reduction from Ø 80/125 to Ø 60/100

KHG 71409391

Flat roof tile to be used with a vertical chimney terminal Ø 80/125

KHG 71409361

Pitched roof tile to be used with a vertical chimney terminal Ø 80/125; it is adjustable from 15° to 45°

KHG 71409371

*+KHG 71409391

Flue pipe accessories Coaxial flue system for gas boilers Description

Code

Coaxial flue tube with terminal Ø 60/100

KHG 71410181

Coaxial flue tube extension Ø 60/100 L=1000 mm

KHG 71410171

Coaxial flue tube extension Ø 60/100 L=500 mm

KHG 71410391

Coaxial flue tube extension Ø 60/100 with checking profile

KHG 71410401

Starting coaxial 90° bend Ø 60/100

KHG 71410141

Starting coaxial 90° bend Ø 60/100 with checking profile

KHG 71410411

Coaxial 90° bend Ø 60/100 with checking profile - additional

KHG 71413661

Coaxial 90° bend Ø 60/100

KHG 71410151

Coaxial 45° bend Ø 60/100

KHG 71410161

Reduction from Ø 80/125 to Ø 60/100

KHG 71411941

Coaxial flue tube with terminal Ø 80/125

KHG 71414061

Coaxial flue tube extension Ø 80/125 L=1000 mm

KHG 71414041

Coaxial 90° bend Ø 80/125 with checking profile

KHG 71414051

Telescopic coaxial flue pipe Ø 60/100

7108063

Coaxial reduction kit Ø 80/125 - Ø 60/100 with draining trap

KHG 71410201

Coaxial condensate collector kit Ø 60/100 (it replaces KHG 714087710)

KHG 71411971

Internal sealing collar Ø 100

KHG 71401771

Adapter for 45° bend/vertical chimney

KHG 71410191

Vertical chimney terminal for coaxial flue system

KHG 71403641

Flat roof tile

KHG 71403671

Pitched roof tile

KHG 71403661

Flue pipe accessories Dual flue system for gas condensing boilers Description

Code

Adjustable dual flue system Ø 80

7102689

Dual flue system Ø 80 it includes: flue reduction, intake connection

KHG 71405911

Vertical flue system B23 type installation*

KHG 71411101

Tube extension Ø 80 L=1000 mm*

KHG 71405941

Tube extension Ø 80 L=500 mm*

KHG 71405991

Tube extension Ø 80 L=250 mm*

7107183

90° bend Ø 80*

KHG 71405921

45° bend Ø 80*

KHG 71405931

Dual flue terminal Ø 80

KHG 71401041

Reduction M/F from Ø 80 to Ø 60*

KHG 71407561

Tube extension Ø 60 L=1000 mm*

KHG 71407531

Tube extension Ø 60 L=500 mm*

KHG 71407521

90° bend Ø 60*

KHG 71407541

45° bend Ø 60*

KHG 71407551

Dual flue terminal Ø 60

KHG 71403721

Reduction M/F from Ø 80 to Ø 50* (1)

7107175

Tube extension Ø 50 L=500 mm * (1)

7107174

Tube extension Ø 50 L=1000 mm * (1)

7107057

Tube extension Ø 50 L=2000 mm * (1)

7107058

90° bend Ø 50* (1)

7107060

45° bend Ø 50* (1)

7107059

90° flue terminal Ø 50 (1)

7107176

Tube Ø 80 centring (pack of 5)

KHG 71403741

Clamp centring kit Ø 80

KHG 71410611

Tube Ø 60 centring kit (pack of 5)

KHG 71405151

Tube Ø 80 supporting bracket (pack of 5)

KHG 71403731

Internal sealing collar Ø 80

KHG 71401851

External sealing collar Ø 80

KHG 71401841

Coaxial vertical chimney terminal 80/125**

KHG 71409351

Dual flue pipes adapter for coaxial chimney from Ø 80/80 to Ø 80/125

KHG 71409381

Flat roof tile Ø 125 to be used with a vertical chimney terminal

KHG 71409361

Pitched roof tile Ø 125 to be used with a vertical chimney terminal; it is adjustable from 15° to 45°

KHG 71409371

* In PP ** +KHG 71409381 (1) Only for Luna Platinum (mod. 24 kW) / Duo-tec (mod. 24 kW) 85

Flue pipe accessories Dual flue system for fanned flue gas boilers Description

Code

Dual flue AFR system kit

KHG 71406151

Flue system B22 type installation kit

KHG 71411181

Painted tube Ø 80 L=1000 mm

KHG 71401831

Painted tube Ø 80 L=500 mm

KHG 71401821

Aluminium tube Ø 80 L=2000 mm

KHG 71403871

Aluminium tube Ø 80 L=1000 mm

KHG 71403861

Aluminium tube Ø 80 L=500 mm

KHG 71403851

90° bend Ø 80

KHG 71401801

45° bend Ø 80

KHG 71401811

Painted insulated tube Ø 80 L=1000 mm

KHG 71410541

Painted insulated tube Ø 80 L=500 mm

KHG 71410531

Insulated bend 90° Ø 80

KHG 71410511

Insulated bend 45° Ø 80

KHG 71410521

Insulated tube adapter

KHG 71403051

PPS adjustable dual flue system Ø 80 (Main5, Eco Compact)

KHG 71413621

AL adjustable dual flue system Ø 80 (Main5, Eco Compact)

7108183

Condensate collector kit

KHG 71405471

Condensate collector kit - Ø 80

KHG 71411961

Vertical condensate collector kit Ø 80

KHG 71412281

Air inlet/outlet flue socket kit

KHG 71405041

Air outlet flue socket kit

KHG 71405031

Tube Ø 80 centring kit (pack of 5)

KHG 71403741

Clamp centring kit

KHG 71410611

Tube Ø 80 supporting bracket (pack of 5)

KHG 71403731

Internal sealing collar Ø 80

KHG 71401851

Internal sealing collar for insulated tubes Ø 100

KHG 71401771

Flue pipe accessories Dual flue system for fanned flue gas boilers Description

Code

External sealing collar Ø 80

KHG 71401841

Dual flue vertical chimney terminal Ø 80/125

KHG 71403651

Vertical chimney terminal for dual flue system Ø 80

7110046

Flat roof tile

KHG 71403671

Pitched roof tile

KHG 71403661

Dual flue horizontal chimney terminal Ø 80/125*

KHG 71401061

Dual flue terminal Ø 80

KHG 71401041

Dual flue system for fanned flue gas boilers: Luna3 Blue Description

Code

Dual flue system kit

KHG 71401791

Painted tube Ø 80 L=1000 mm

KHG 71401831

Painted tube Ø 80 L=500 mm

KHG 71401821

Bend 90° Ø 80

KHG 71401801

Dual flue terminal Ø 80

KHG 71401041

Flexible ducting system for condensing boilers Description

Code

PP flexible tube Ø 80 L= 1,5 m

KHG 71410571

PP flexible tube Ø 80 L= 20 m

KHG 71410581

PP 90° bend Ø 80 with supporting bracket and condensate drainings

KHG 71410591

PP 90° bend Ø 80 with supporting bracket

KHG 71410601

Flexible centring kit Ø 80 (pack of 3)

KHG 71410621

Triple lips gaskets kit Ø 80 (pack of 5)

KHG 71411121

Special accessories in case of hard weather conditions Description

Code

Horizontal coaxial flue terminal Ø 60/100

KHG 71413611

Vertical coaxial flue terminal Ø 60/100 for gas boilers

KUG 71413571

Vertical coaxial flue terminal Ø 60/100 for condensing boiler

KUG 71413581

Vertical coaxial flue terminal Ø 80/125 for condensing boiler

KUG 71413591

* Selling out product

Other accessories: replacement kits Description

Universal replacement kit: it includes fittings and flexible stainless steel pipes

Code

KHG 71405881

Platinum Duo-tec (1)

(1) Platinum includes: Luna Platinum, Nuvola Platinum; Duo-tec includes: Luna Duo-tec, Duo-tec Compact, Duo-tec Max, Nuvola Duo-tec

Luna3 Comfort HT Solar

Code

Ecofour Eco Compact Main5

•

Luna Platinum, Duo-tec, Compact, Max

Installation templates Description

Luna3

Nuvola3 BS 40 Nuvola3 Comfort

(1) Platinum includes: Luna Platinum, Nuvola Platinum; Duo-tec includes: Luna Duo-tec, Duo-tec Compact, Duo-tec Max, Nuvola Duo-tec

Platinum Duo-tec (1)

Luna3 Comfort HT Solar

Slim Slim HPS

Luna3

Metal template for Platinum/Duo-tec

7109786

•

Metal template for Duo-tec Compact

7109787

Duo-tec Compact

Luna3 Comfort HT Solar template

KSL 71412201

Metal template for Luna3 Comfort fanned flue models s •

KHG 71406201

•

Metal template boilers for outdoor models

KHG 71407641

Silver Space

Metal template for storage boilers

KHG 71406011

Metal template for combi

KSL 71408641

Ecofour Eco Compact Main5

Nuvola3 BS 40 Nuvola3 Comfort

•

• Comfort Combi

• For open flue and fanned flue Luna3 models. s

Not available for Luna3 Silver Space.

Accessories for solar integration Description

Code

KHG 71412311 Solar valve kit

Platinum Duo-tec (1)

Luna Platinum, Duo-tec, Compact, Max

(1) Platinum includes: Luna Platinum, Nuvola Platinum; Duo-tec includes: Luna Duo-tec, Duo-tec Compact, Duo-tec Max, Nuvola Duo-tec

Luna3 Comfort HT Solar

Luna3

Ecofour Eco Compact Main5

•

Nuvola3 BS 40 Nuvola3 Comfort

Hydraulic accessories Description

Code

(1) Platinum includes: Luna Platinum, Nuvola Platinum; Duo-tec includes: Luna Duo-tec, Duo-tec Compact, Duo-tec Max, Nuvola Duo-tec

Platinum Duo-tec (1)

7109314

Luna Platinum

7103512

Duo-tec, Max

7103511

Duo-tec, Max

7103510

Duo-tec

7106980

Duo-tec Compact

Luna3 Comfort HT Solar

Luna3

Slim Slim HPS

Ecofour Eco Compact Main5

Nuvola3 BS 40 Nuvola3 Comfort

Heating systems taps with filter

Heating systems taps and connection pipes

Connection pipes for combi boiler

Connection pipes for heating only boilers

Telescopic connection pipes with heating and mains water valves

KHG 71411071

•

KHG 71410701

•

KHG 71411081

•

KHG 71411231

Luna3 Blue Comfort Max

KHG 71412691

Luna3 Blue Comfort Max

KHG 71412701

Luna3 Blue

Hydraulic connection kit for combi boiler

Hydraulic connection kit for heating only boiler

Hydraulic connection kit with heating valves

Hydraulic connection kit for combi boilers with heating taps

Hydraulic connection kit for standard combi boilers

Hydraulic connection kit for standard system boilers

KHG 71402891 Telescopic connection pipes with gas inlet valve

7106980 Telescopic connection pipes with gas and mains water taps

•

Eco Compact Main5

KHG71411091

Nuvola3 BS40

7107388

Nuvola3 BS40

Hydraulic connection kit for storage boilers

Telescopic connection pipes

* To be used for Slim of connected with female/female adapter available on the market.

Hydraulic accessories Description

Code

KHG 71402331 Vertical tube connection kit: it includes 5 tubes for vertical connection

(1) Platinum includes: Luna Platinum, Nuvola Platinum; Duo-tec includes: Luna Duo-tec, Duo-tec Compact, Duo-tec Max, Nuvola Duo-tec

Platinum Duo-tec (1)

Luna3 Comfort HT Solar

Luna Platinum, Duo-tec, Compact, Max

KHG71402191

Luna3

Slim Slim HPS

Ecofour Eco Compact Main5

•

+ KHG 714028910 •

•

Ecofour

Nuvola3 BS 40 Nuvola3 Comfort

Mains water valve with filter

Slim (combi boilers)

KHG 71405261*

•

Mains water valve without filter *

•

KHG71402461

Ecofour

Heating system flow/return valve with filter

KHG 71402201*

•

Heating system flow/return valve without filter *

7104976 Stop valve kit to avoid installation water to get in contact with waterworks

Slim (combi boilers) + 1.230 - 1.300 Fi / FiN models

•

Luna Platinum, Duo-tec, Max

•

KHG 71402321 Stop valve kit to avoid installation water to get in contact with waterworkss

Stop valve kit for storage boilers to avoid installation water to get in contact with waterworks

Stop valve kit for condensing storage boilers to avoid installation water to get in contact with waterworks

Nuvola3 Comfort

KHG 71408381

KHG 71408391

Nuvola Platinum, Nuvola Duo-tec

KHG 71402161 Expansion vessel (10 lt) n

* To be used for Slim of connected with female/female adapter available on the market. s Not available for Luna3 Silver Space n Not available for Luna3 Silver Space/Luna3 Comfort Max

•

Hydraulic accessories Description

Code

KHG 71407971

(1) Platinum includes: Luna Platinum, Nuvola Platinum; Duo-tec includes: Luna Duo-tec, Duo-tec Compact, Duo-tec Max, Nuvola Duo-tec

Platinum Duo-tec (1)

Luna3 Comfort HT Solar

Luna3

Slim Slim HPS

Ecofour Eco Compact Main5

Nuvola3 BS 40 Nuvola3 Comfort

Nuvola Duo-tec

Additional expansion vessel (2 lt)

KHG 71403441

Nuvola3 BS 40

Additional expansion vessel (2 lt)

KSL 71408611

Comfort Combi

KHG 71408521

•

KHG 71402291

•

Combi additional expansion vessel (4 lt)

Slim

Pump UPS 15/70

Flow restrictor 8 l/minss

KHG 71402271

Nuvola Platinum, Nuvola Duo-tec

Nuvola3 Comfort

Recirculating kit

KHG 71410661

Heating only

KFG 71411191

Heating only

3 way valve motor

3 way valve motor and hot water temperature sensor*

Heating only

KHG 71409631 Electric 3 way kit for external connection

KHW 71408741

Slim

DHW sensor – pump connecting cable

not available for: Luna3 Silver Space * to be used in case of heating only boilers Luna3 models for connection to any solar cylinders

Hydraulic accessories Platinum FS Description

Right side hydraulic connection kit

7213879

Left side hydraulic connection kit

7213880

Central hydraulic connection kit

7213878

Exchanger-boiler recirculation kit

7213877

Cover and hydraulic connection kit for 160 lt tank

7213884

Cover and hydraulic connection kit for 220 lt tank

7213883

Mixing zone kit

7213882

Installation template

7213881

Central hydraulic connection kit for only heating

7213885

Outdoor installation accessories Description

Code

Platinum Duo-tec (1)

(1) Platinum includes: Luna Platinum, Nuvola Platinum, Platinum FS; Duo-tec includes: Luna Duo-tec, Duo-tec Compact, Duo-tec Max, Nuvola Duo-tec

Luna3 Comfort HT Solar

Luna3

KHG 71402481

24 kW

KHG 71407341

â&#x20AC;˘

Upper cover for open flue models

Upper cover for fanned flue models

Ecofour Eco Compact Main5

Nuvola3 BS 40 Nuvola3 Comfort

Thermoregulation accessories Luna Platinum, Nuvola Platinum, Platinum FS (the accessories dedicated to Platinum cannot be used for Duo-tec boilers) Description

Code

Outdoor sensor for Platinum/Duo-tec

7104873

Wireless outdoor sensor THINK* (ONLY FOR PLATINUM BOILERS)

7103027

3LEDs interface THINK with support (ONLY FOR PLATINUM BOILERS)

7102340

5LEDs interface THINK with support (ONLY FOR PLATINUM BOILERS)

7102441

Wireless aerial-5 LEDs (ONLY FOR PLATINUM BOILERS)

7102343

Remote control THINK

7102442

Remote contro THINK wireless

7102443

Modulating room thermostat THINK (ONLY FOR PLATINUM BOILERS)

7101061

Wireless modulating room thermostat THINK* (ONLY FOR PLATINUM BOILERS)

7103044

Room thermostat with timer THINK (ONLY FOR PLATINUM BOILERS)

7102980

Wireless room thermostat with timer THINK* (ONLY FOR PLATINUM BOILERS)

7102979

Room thermostat RAA21

KHG71406281

Room thermostat

KHG 71408691

* wireless model to be ordered with the interface kit for remote control THINK - 5 leds (710244103 .) when the remote control is installed on the wall, or with the wireless aerial (710234302 .) when the remote control is installed in the boiler control panel

Thermoregulation accessories Luna Platinum, Nuvola Platinum, Platinum FS (the accessories dedicated to Platinum cannot be used for Duo-tec boilers) Description

Code

Programmable clip-in module THINK (ONLY FOR PLATINUM BOILERS)

7100345

Heating flow/return sensor clip-in module THINK (ONLY FOR PLATINUM BOILERS)

KHG 71407891

Programmable external module THINK (ONLY FOR PLATINUM BOILERS)

7105037

Hot water temperature sensor

KHG 71407681

Hot water temperture sensor (6 m)

7213887

Thermoregulation accessories Luna Duo-tec, Duo-tec Compact, Duo-tec Max, Nuvola Duo-tec (the accessories dedicated to Platinum cannot be used for Duo-tec boilers) Description

Code

Outdoor sensor for Platinum/Duo-tec

7104873

Modulating thermostat (ONLY FOR DUO-TEC BOILERS)

7104347

Wireless modulating thermostat â&#x20AC;&#x201C; it includes wireless transmitter (ONLY FOR DUO-TEC boilers)

7105430

Modulating room thermostat with timer (ONLY FOR DUO-TEC BOILERS)

7104336

Wireless modulating thermostat with timer (ONLY FOR DUO-TEC BOILERS)

7105432

Room thermostat

KHG 71408691

PCB interface for zone control

7113502

Zone controller kit - MLC30.01 (4 to 1)

7109320

Mixing controller kit - MLC16.60 (mixed zone controller)

7110415

Hot water temperature sensor

KHG 71407681

Thermoregulation accessories Description

Code

Luna3 Comfort HT Solar

KHG 71406211

Luna3

Slim Slim HPS

•

Slim

Ecofour Eco Compact Main5

Nuvola3 BS 40 Nuvola3 Comfort

•

Outdoor sensor

7104873

•

Outdoor sensor

KHG 71406161

Slim

KHG 71406171

Slim

Mechanical daily timer kit

Digital weekly timer

KHG 71410641

•

Nuvola3 BS 40

KHG 71411471

•

Remote controller and climatic regulator

Remote controller and climatic regulator wireless (already included in Luna3 Comfort Air)

KHG 71407261

Slim

KHG 71407251

Slim

Remote controller and climatic regulator

PCB interface for remote controller

KHG 71408681

•

Slim

•

KHG 71408671

•

Slim

•

KHG 71408691

•

Slim

•

Weekly timer and room thermostat nice time

Weekly timer and room thermostat magic time plus

Room thermostat

Eco Compact Main5

KHG 71410051 PCB for remote alarm signal

KHG 71410651

•

KHG 71406191

Heating only

•

PCB interface for zone control

Hot water temperature sensor

Mixing systems accessories

(1) Platinum includes: Luna Platinum, Nuvola Platinum; Duo-tec includes: Luna Duo-tec, Duo-tec Compact, Duo-tec Max, Nuvola Duo-tec

(Dimensions mm hxwxd: 600x450x160; MS models- hwxd: 700x450x160) Description

Code

Platinum Duo-tec (1)

Luna3 Comfort HT Solar

Luna3

Slim Slim HPS

Ecofour Eco Compact Main5

Nuvola3 BS 40 Nuvola3 Comfort

Wall hung box for universal mixing system kit “MS IN”

7109882

•

Box for universal mixing system kit “MS IN”

KHG 71412811

•

Mixing system kit “MS IN” THINK (1 HT zone- 2 LT zones)

7104769

Platinum

Mixing system kit “MS IN” THINK (1 HT zone- 1 LT zone)

7104770

Platinum

3 zones

7104823

2 zones

7104824

1 zone

7104825

• • •

Universal mixing system kit “MS IN” (1 HT zone – 1 LT zone)

KHG 71412911

•

Slim up to 30 kW

•

Universal mixing system kit “MS IN” (1 HT zone – 2 LT zones)

KHG 71412801

•

Slim up to 30 kW

•

Mixing system kit “MS IN” ( 2 LT zones)

KHG 71412921

•

Slim up to 30 kW

•

Mixing system kit (*)

KFG 71407961

•

Additional pump to control a 3rd zone (*)

KHG 71408511

Kit for mixing system

Universal mixing system kit “MS IN” :

Slim up to 30 kW Slim up to 30 kW Slim up to 30 kW

Other accessories Description

(1) Platinum includes: Luna Platinum, Nuvola Platinum; Duo-tec includes: Luna Duo-tec, Duo-tec Compact, Duo-tec Max, Nuvola Duo-tec

Code

Platinum Duo-tec (1)

Luna3 Comfort HT Solar

Luna3

Slim Slim HPS

Ecofour Eco Compact Main5

Nuvola3 BS 40 Nuvola3 Comfort

•

KSL 71412411 Installation kit separate installation Luna3 Comfort HT Solar and storage tank

•

KHG 71407381

Bottom cover

KHG 71402301

Luna Platinum

•

KHG 71402431

Luna Platinum

•

KHG 71412561

•

KHG 71413531

•

Polyphosphate batcher n

Polyphosphate recharge (pack of 4)

Condensate neutralizer kit (for boilers up to 100 kW)

Condensate neutralizer kit recharge (for boilers up to 100 kW)

7213162 Condensate drain kit for condensing boilers up to 45 kW n

not available for Luna3 Silver Space/Luna3 Comfort Max

Accessories for Slim Description

Code

Windproof flue terminal diam. 160 (for 1.400iN - 1.490iN models)

KHW 71406881

Windproof flue terminal diam 180 (for 1.620 iN model)

KHW 71406891

Accessories for UB Inox - Combi 80 L Description

Code

UB inox

Slim UB inox

KHG 71408541

•

KHG 71410661

•

KFG 71411191

•

KHG 71409631

•

Combi 80 L

UB Inox additional expansion vessel (4 litres)

3 way valve motor

3 way valve motor and hot water temperature sensor*

Electric 3 way kit for external connection

KHW 71408561

•

KHW 71409681

•

Connection pump kit

Connection kit to indirect cylinder for boilers > 35 kW

KSG 71408821

•

Metal template UB Inox 80-120

KSL71411051 Combi 80 L connection kit

•

Note

100

101

Quality Environment Safety

Quality Environment Safety are Baxi strategic aims and the awarded certifications ensure compliance with the specific regulations

36061 BASSANO DEL GRAPPA (VI) - ITALY Via Trozzetti, 20 marketing@baxi.it www.baxi.it The Company assumes no responsibility for any possible contents mistakes, and reserves the right to make changes in products, due to technical or commercial demands, at any time without notice. Baxi S.p.A. 03-14 (E)