Nuvola3 Comfort

Nuvola3 Comfort

Gas wall hung boilers with storage tank

The ultimate innovation for hot water Nuvola3 Comfort is the boiler with a 60 lt integrated cylinder that can deliver large amounts of hot water Nuvola3 Comfort produces up to 490 litres of DHW in 30’ (ΔT 30°C) and thanks to its output it can recover the cylinder temperature in only 4’.

Nuvola3 Comfort is provided with a LCD display where all the information and diagnostics on boiler’s working is easily and clearly showed.

The selection buttons allow an easy set and programme of the boiler’s parameters.

Nuvola3 Comfort 140 Fi

with 60 lt cylinder, fanned flue

14 kW

240 Fi

with 60 lt cylinder, fanned flue

24 kW

280 Fi

with 60 lt cylinder, fanned flue

28 kW

320 Fi

with 60 lt cylinder, fanned flue

32 kW

240 i

with 60 lt cylinder, open flue

24 kW

280 i

with 60 lt cylinder, open flue

28 kW

Nuvola3 Comfort is provided with a built-in remote control panel (wire connection)

2

Nuvola3 Comfort

• Remote control with LCD display supplied with the boiler; it includes room thermostat, heating and sanitary timers functions • High sanitary performances: up to 490 lt in 30 min (∆T 30°C) • 60 lt stainless steel cylinder • Built-in sanitary expansion vessel

High performance

Built-in expansion vessel

Nuvola3 Comfort is the range with integrated storage which grants high sanitary performance and it represents the ideal solution in case of simultaneous big hot water demands.

Nuvola3 Comfort is provided with a built-in sanitary expansion vessel which represents the ideal solution in case of high pressures on the mains sanitary water.

Hydraulic system

3 way electric diverter valve Steel burner Primary exchanger made of copper pipes protected with anticorrosion coating 60 lt stainless steel AISI 316L cylinder Automatic by-pass Low energy pump with automatic air vent System to prevent pump and 3 way valve sticking operating every 24 hours Heating circuit relief valve set at 3 bar Cylinder relief valve set at 8 bar Built-in sanitary 2 litres expansion vessel Sanitary recirculation option

Thermoregulation system

Two heating temperatures possible ranges: 30/85°C, 30/45°C Built-in climatic regulation (outdoor sensor available as optional) Control of multi-zones system option Room sensor, heating circuit and sanitary timers included in the control panel

Control system

Overheat limit thermostat for the water/flue exchanger Hydraulic pressure switch to prevent boiler operating in event of low water Pressure switch to ensure safe discharge of flue products (fanned flue models) Flue thermostat to ensure safe discharge of flue products (open flue models) Electronic temperatures control by NTC sensors Full anti-frost device Anti-legionella function Electronic thermometer AFR system, patented by Baxi that allows the efficiency optimization thanks to a perfect inlet air regulation (fanned flue models with dual flue system) Heating circuit pressure gauge

Combi with storage Fanned flue

Maximum heat input Minimum heat input Maximum heat output Minimum heat output

kW kW kW kW

140 Fi 240 Fi 15,3 26,3 6,9 11,9 14 24,4 6 10,4

Maximum efficiency % 90,9 92,9 Energetic efficiency (92/42/CEE) HH HHH Efficiency at 30% % 88,3 90,4 Minimum working temperature °C -5 -5 Expansion vessel/pre-charge l/bar 7,5/0,5 7,5/0,5 Heating system max pressure bar 3 3 30/85 30/85 Regulation of water temperature in heating circuit °C

Open flue

280 Fi 320 Fi 30,1 34,5 11,9 11,9 28 32 10,4 10,4 93,1 HHH 90,5 -5 7,5/0,5 3

240 i 27,1 11,9 24,4 10,4

280 i 31,1 11,9 28 10,4

93,2 90,2 90,6 HHH HH HH 90,5 89,4 89,5 -5 -5 -5 7,5/0,5 7,5/0,5 7,5/0,5 3 3 3

30/85

30/85

30/85

30/85

30/45

30/45

30/45

30/45

30/45

30/45

Regulation of water temperature in DHW circuit Cylinder capacity Cylinder expansion vessel capacity/pre-charge Specific flow according to EN 625 DHW production ∆T 25°C (1) DHW production at discharge ∆T 30°C (1)

35/65

35/65

35/65

35/65

35/65

35/65

60 2/3,5 14,1 8,1 260

60 2/3,5 18,2 14 390

60 2/3,5 19 16,1 450

60 2/3,5 21,5 18,3 490

60 2/3,5 18,2 14 390

60 2/3,5 19 16,1 450

Maximum pressure on DHW circuit bar 8 8 8 8 8 Flue tube Ø mm - - - - 140 Coaxial flue system Ø 60/100 m 5 4 4 4 - Dual flue system Ø 80 max length m 30 30 30 30 - Maximum flue mass flow rate kg/s 0,015 0,018 0,018 0,022 0,022 Minimum flue mass flow rate kg/s 0,015 0,017 0,018 0,021 0,021 Maximum flue temperature °C 120 134 142 142 110

8 140 0,024 0,021 115

°C l l/bar l/min l/min l/30’

Dimensions (h x w x d) mm 50x600x466 9 Net weight kg 70 70 70 70 60 Gas type Nat. gas/LPG Power consumption W 190 190 190 190 110 Grade of protection IPX5D IPX5D IPX5D IPX5D IPX5D (1)

60 110 IPX5D

Without flow restrictor.

3

Quality Environment Safety

www.baxi.it Quality Environment Safety are Baxi strategic aims and the awarded certifications ensure compliance with the specific regulations

36061 BASSANO DEL GRAPPA (VI) Italy Via Trozzetti, 20 Tel. +39 0424 517111 - Fax: +39 0424 38089 marketing@baxi.it The Company assumes no responsibility for any possible contents mistakes, and reserves the right to make changes in products, due to technical or commercial demands, at any time without notice.

Baxi S.p.A. 11-10