Spc mod gbdef0214

SPC

Floor standing heat pump water heaters

Baxi launches its new range of floor standing air-water heat pump water heaters.

Baxi has always been active in developing technologically-advanced and lowest environmental impact solutions. SPC new range distinguishes itself by its efficiency and its capacity of heating large-water quantities up to 65°C with little electricity consumption, as it absorbs heat directly from external air (up to -5°C).

Components Fan

Dryer filter Thermostatic expansion valve

Oversized evaporator

Defrosting electrovalve

Compressor

Remote mount control panel

Enameled steel internal indirect cylinder

Integrated electrical resistance

Imposed current titanium anode

Spiral heat exchange unit to be connected with a solar circuit or to a boiler (SPC 300 S only) External condenser wrapped around the indirect cylinder

The SPC-S model can be connected with a solar system or with a BAXI boiler

Domestic cold water inlet

Installation example Air connection’s maximum length*

m

Ø 160 mm

10

Ø 200 mm

20

External flue duct– no impact on the ambient temperature

No flue duct–for ambient cooling (min 30 m3)

*Except for bend and grid reductions

Model

Capacity l

Heat pump power kW

SPC 200 with integrated electrical resistance

210

1,7

SPC 300 with integrated electrical resistance

270

1,7

SPC 300 S with integrated electrical resistance and (solar or boiler) integrated exchanger

265

1,7

2

SPC

SPC • Domestic hot water production up to 65°C with R134A gas • COP 3,7 (DHW temperature of 51°C –air temperature of 15°C) • Programmable and remote mount control panel • Limited electrical absorption: 500W • Low noise-level at a 2m distance • From -5° to 35°C external air temperature operation • Model with solar integration (SPC-S) • Condenser wrapped directly around the indirect cylinder – to guarantee an efficient heat transfer without scale formation • Electrical pulse titanium anode • Integrated electrical resistance from 1,6kW

39

dB(A)

The remote control panel 14

Screen of large dimensions, easy and intuitive displaying of operating modes, time programming, water quantity, number of baths available, etc.

Buttons of navigation and parameter adjustment with + and - signs

3

12

34

MODE

MENU

Program choice button

Operating mode adjustment: - Automatic. When the «comfort DHW» program is active, DHW production is guaranteed by the HP module and, if necessary, by electrical supply (alternatively, by water supply with SPC 300 S model).

- Eco. When the «reduced» program is active, ACS production is guaranteed only by the HP module.

- Boost. During the «forced» mode, DHW production is guaranteed simultaneously by the HP module and electric integration (possibly by water integration) for a 6-hour time period (time can be modified).

- Holiday. DHW production can be interrupted for an adjustable time period. Nevertheless, a +10°C DHW temperature is kept to guarantee anti-freezing protection.

A saving example In the following example*, a comparison is displayed between the new SPC water heater annual electrical consumption and the one of a traditional electric water heater. As shown by the example, the money saved on the bill amounts to €400.

€ 140/ year

SPC 300

€ 400 annual saving*

€ 540 / year

Traditional electric water heater

* The calculation has been carried out according to the following assumptions: energy demand of a 120 m2-large house, UNI TS 11300-2 ref., common water heater seasonal return calculated from table n° 13 – UNI TS 11300-2 and SPC water heater return according to EN 16147 regulation.

3

Technical data Model

SPC 200

SPC 300

SPC 300 S

l

210

270

265

Heat pump power*

kW

1,7

1,7

1,7

Absorbed electrical power*

We

500

500

500

Capacity

3,5

3,7

3,6

Integrated electrical resistance power

COP* kW

1,6

1,6

1,6

Maximum working pressure

bar

10

10

10

Voltage supply

V

230V Mono

230V Mono

230V Mono

SPC 300 S exchange surface

m2

-

-

1

l

240

357

358

kWh/24h

0,73

0,67

0,75

m3/h

385

385

385

Air pressure available for fan

Pa

50

50

50

Maximum length for air connection Ø 160mm / Ø 200mm

m

10/20

10/20

10/20

DHW quantity supplied at a temperature of 40°C (15°C for domestic cold water) Heat rejection Air flow

R134 A coolant Sound pressure** Empty weight

kg

1,45

1,45

1,45

dB(A)

39

39

39

kg

92

105

123

* Value for domestic water heating from 15° to 51°C with 15°C temperature for air in entrance. ** Measured at a 2-meters distance.

Dimensions (mm) SPC 200 - SPC 300

SPC 300 S

690

690

ø200

ø200

1690 - SPC 200

ø200

ø200

7

7

1

1

2000 2

1460

KEY: 1 - Domestic hot water outlet G 3/4’’ 2 - Electrical resistance 3 - Domestic cold water inlet G 3/4’’ 4 - Water exchanger inlet G 3/4’’ 5 - Hole for water exchanger probe G 3/4’’ 6 - Water exchanger outlet G 3/4’’ 7 - Exhaust pipe for condensate PVC Ø16 x 12mm

2 1375

2000 - SPC 300

4

5

658 6 3

4(1)

90

90

The appliance can be transported in horizontal position and exclusively on the rear of the vehicle (for short trips).

300

600

600 7

1

1 2

3

4(1)

3

4

5

6

7

3 2

50°

Quality Environment Safety

Quality Environment Safety are Baxi strategic aims and the awarded certifications ensure compliance with the specific regulations

36061 BASSANO DEL GRAPPA (VI) - ITALY Via Trozzetti, 20 marketing@baxi.it www.baxi.it The Company assumes no responsibility for any possible contents mistakes, and reserves the right to make changes in products, due to technical or commercial demands, at any time without notice.

Baxi S.p.A. 02-14 (E)