MAY 2014
BODYTALK Maximum Extraction
ALSO IN THIS ISSUE: New PPG Spot Blenders New Cyclone Pads Meet Our Q1 Competition Winner! All the latest offers from Bodyline®
NATIONWIDE COVERAGE:
New Bodyline ™ Air Max Strips ®
enquiries@brownbrothers.com
@BBDUK
1889 - 2014: 125 Years Of Experience Makes A Difference
Aberdeen
0845 034 0850
Basingstoke
01256 320 641
Birmingham
0121 313 2252
Bristol
01179 828 397
Chelmsford
01245 266 736
Glasgow
01698 801 480
Inverness
0845 241 2561
Leeds
0113 243 0481
Maidstone
01622 790305
Newcastle
0191 276 6566
Northampton 01604 624 211 Plymouth
01752 338 172
Swansea
01792 587 196
Warrington
01925 810 276
NEW
PPG Brand is launching a new spot blender; ideal for use on spot, panel and multi panel repairs the new DELTRON® Spot Blenders D8430 and D8731 from PPG melts overspray on repair edges to deliver a market leading final appearance with no visible fade-out edge with minimal polishing required.
PPG SPOT BLENDER 1 LITRE
PPG SPOT BLENDER AEROSOL 400ML
• Easy to use • Fast process time • Superb finish
• Easy to use • Fast process time • Superb finish
Part No:
TRADE
£57
.75
PPGD84300100
NEW
Part No:
TRADE
£35.54
PPGD87310040
PPG UV-CURED PRIMER SURFACER AND ACTIVATOR • • • • • •
Ease of Mixing - 2 part component; reducing stock holding. 1 day pot life - saving material and labour costs. Speed of Appliction - 1 Visit application / no flash off required; saving energy and process times. Clear Material gives clear visibility of the repair below the primer - saving proces times. Fast 4 Minute cure. Easy to Sand - resulting in lesss dry ancillaries / abrasives per job.
NEW
TRADE
£82.74
G/S ADJUSTABLE D/E BLOCK 68H 70 X 420MM • Adapts to surface contours • Concave/convex shape is finely adjustable via a setting screw • Multi-hole backing provides full surface dust extraction to ensure a dust free working environment • Easy to use and adjust to surface shape • Flexible & ergonomic to give greater user control TRADE
TRADE
£281
£76
.12
PPG UV-CURED PRIMER SURFACER Part No:
.72
ACTIVATOR FOR UV-CURED PRIMER SURFACER
PPGD80820100
Part No:
BDPBSDEBA420
NEW
PPGD87830025
BODYLINE CYCLONE PADS
TRADE
£28.57 LOW VOC THINNER MEDIUM 1L Part No:
Part No:
PPGD87180100
1889 - 2014: 125 Years Of Experience Makes A Difference
Bodyline Cyclone Pads are made of strengthened fibres, making these pads strong and long-lasting. The product produces a dense scratch pattern and rapid result when sanding. The dense scratch pattern reduces the tension in the surface, which ensures a good result when painting. Bodyline Cyclone Pads can be used for reaching hard-toreach areas prior to painting, spot-repairs and removing overspray in a blending zone. They can be used both dry and wet. Part No:
Description
Trade
BDPBCPVF
115 x 230mm Very Fine
£17.46
BDPBCPUF
115 x 230mm Ultra Fine
£17.46
BODYTALK 800W UV-A CURING KIT - KIT CONTAINS:
£27.95
Part No:
Part No: COVUKBLPSM
OFFER
£1700
UVLPPGA2
NEW
Size Medium
COVUKBLPSL
Large
COVUKBLPSXL
X-Large
COVUKBLPXXL
XX-Large
EXCLUSIVE PPG PROTECTIVE COVERALLS PPG coveralls are made from revolutionary fabric to allow breathability and comfort whilst offering excellent protection. The innovative lightweight carbon fibre fabric eliminates any electro-static charge and heat build up ensuring complete user safety. • 100% dust & lint free • Anti-static • Hi-life carbon fibre material • Double zipper, vented mesh underarms & back panel mesh • Prevents contaminations in the working environment • User safety • Eliminates heat build up and static electricity • Adds comfort and breathability
UV 800W FLOOD LAMP & TRANSFORMER
HANGING CLAMP MOUNTING BRACKET
• Compact, lightweight and durable • Modular design for multiple UV lamp installations • Fan cooled • Filter glass assembly is fitted to a hinged front door, enabling easy access for UV bulb replacement & cleaning • Elapsed hour counter for service scheduling • Safety wire mesh over filter glass
• Designed for stand or fixed mounting
Part No:
UVLHLEXTCABLE
Part No:
UV BLOCKING SPECTACLES • For eye protection against UV light exposure. Part No:
UVLFLCLAMP
UVLUVSAC&B
5M EXTENSION CABLE • For use with UV flood lamp enabling easy product mobility Part No:
UVLHLEXTCABLE
NB: There is up to a 4 week lead time
OFFER
HONEYWELL XC PROTECTIVE SPEC GR TSR LENS
BODYSHOP HAND WIPES • • • •
Portable hand wipe for bodyshop applications Quickly cleans hands without water Removes paint, resin and sealant Re-sealable tub containing 150 wipes Part No:
The Honeywell protective tinted safety glasses offer eye protection against UV light exposure. Part No:
BDPBBHW150
£9.99
£89
£11
.99
£10.99
£199
OFFER
OFFER
UV LAMP STAND This lamp stand is easy to use, lightweight and very transportable around the repair. The lamp stand with the UV lamp fitted is simple to place in front of the repair to allow the drying to take place. Part No:
NJR10634
CCA1011026
SATAJET 100 B F RP 1.4 + UV RPS 0.6L The Sata 100 B gives the control and ease of use to complement our UV primer. The 1.4 fluid tip helps to minimise your product usage while still delivering the build you need. Part No:
SXK206664
OFFER
£125 TRADE
£92.50
WORKSHOP HAND WIPES • • • •
Portable hand wipe for general applications Quickly cleans hands without water Removes oil, grease and general soiling Re-sealable tub containing 150 wipes Part No:
BDPBWHW150
PPG UV PRIMER GRAVITY GUN 1.4MM
RPS UV 0.6L 125ΜM FLAT SIEVE (BX 57)
The PPG primer gun from Iwata gives the control and ease of use to complement our UV primer. The 1.4 fluid tip helps to minimise your product usage while still delivering the build you need.
The Black RPS pot stops the UV light in the environment from reaching the UV primer thus preventing the activation occurring.
Part No:
IWAW0SPG90PP14C
Part No:
SXK139451
MAXIMUM EX TR AC TION; NE W BODYLINE® AIR MAX STRIPS™
Product of the month BODYLINE AIR MAX ABRASIVE STRIPS
Body damage repair work requires flexibility and efficiency from the Bodyshop. Occasionally, the issue at hand is only a small scratch, at other times larger parts must be sanded, filled, painted and polished. Bodyline’s Air Max Strips™ are the most economical sanding solution, offering worker’s lungs a smaller exposure limit to dust particles. With a good dust extraction unit, special metals like zinc and aluminium or composites like carbon fibre and fibre glass can also be sanded. The new Air Max Strips™ are ideal for sanding soft materials as the anti- clogging capability will prevent the abrasive from rapid wear/premature wear compared to using traditional abrasives. A sanding net with thousands of holes provides a phenomenal dust extraction. The maximum distance from each sanding particle to the closest dust extraction hole is 0.5 mm! Bodyline’s new Air Max Strips™ clever construction provides many advantages. Because the dust is being continuously sucked away, sanding is virtually dust free. Tests have shown that the dust release from Air Max Strips™ is minimal when compared to the dust released from traditional abrasives with dust extraction. When the abrasive and the sanding surface are constantly kept dust free, the lifespan of the abrasive is extended. Since the abrasive maintains its aggressive properties over the entire surface, sanding becomes more even and efficient.
• Fast and effective; with Air Max Strips™ dust-free effective sanding can be carried out during the entire process, this saves time and guarantees better quality. • Excellent cutting speed – Providing time saving benefits to the Bodyshop. • No clogging on the abrasive – Giving the strips longevity of use and providing the Bodyshop with cost saving benefits. • Unbeatable dust extraction - Helping to create a clean working environment. • No hole alignment needed making the strips easy to use. Description
Trade
BDPBAMS19880
70 x 198mm - 80
£36.71
BDPBAMS198120
70 x 198mm - 120
£33.75
BDPBAMS198180
70 x 198mm - 180
£33.75
BDPBAMS198240
70 x 198mm - 240
£33.75
BDPBAMS198320
70 x 198mm - 320
£33.75
BDPBAMS12580
70 x 125mm - 80
£20.60
BDPBAMS125120
70 x 125mm - 120
£17.46
BDPBAMS125180
70 x 125mm - 180
£17.46
BDPBAMS125240
70 x 125mm - 240
£17.46
BDPBAMS125320
70 x 125mm - 320
£17.46
BDPBAMS42080
70 x 420mm - 80
£59.20
BDPBAMS420120
70 x 420mm - 120
£52.41
BDPBAMS420180
70 x 420mm - 180
£52.41
BDPBAMS420240
70 x 420mm - 240
£52.41
BDPBAMS420320
70 x 420mm - 320
£52.41
Part No:
Top Tips
WHATEVER, WHENEVER, WHEREVER.
With our new streamlined bespoke online ordering system, you can order products within minutes, leaving more time for you in the bodyshop.
Register for an online account NOW @ w w w.brownbrothers.com
1889 - 2014: 125 Years Of Experience Makes A Difference
Using the top quality Bodyline abrasives helps to make sure the quality of your repair is as good as it can possibly be and you are getting the most efficient results in terms of cost and time available. To complement your abrasives you need to make sure you are using good quality dust extraction. The dust created by all types of sanding is harmful to inhale to yourself and those working around you; it leaves more mess to be cleaned up and will shorten the life of your abrasives. The latest Bodyline abrasives come with the latest configuration of holes to maximise the performance of your dust extraction; removing the dust stops the build up of residue on the face of the abrasive, if the dust is allowed to build on the surface it will stop the cutting
action and can lead to scratch marking on the surface. You must ensure that your hoover is always maintained correctly, it should be emptied frequently and the hoses must be kept off the floor minimising the risk of items being drawn into the pipes. It is equally important that you turn your hoover off when not in use, this will help to keep your energy costs down. You need to be carful when working with aluminium and steel, these metals should be kept separate and this includes not being mixed in your dust extraction; this is especially worth considering if you are repairing and sanding a lot of alloy wheels.
BODYTALK FROM
£23.99 OFFER
£17.99 SOUND DEADENING FELT PANELS An acoustic insulating/sound proofing panel comprising a layer of felt combined with bitumen. • Can easily be cut into shape • Self-adhesive • Easy to apply • Fire retardant to FMVSS302 • Suitable for use under bonnet, engine bulkheads, boot lids or under carpet • Panel size 50cm x 50cm • Approximately 11mm thick • Box of 4 Part No:
BDPBSDFP4
FROM
£23.99
FROM
79p ROLLER PRIMING SYSTEM
SOFTSPEED ROLL For dry hand sanding and finishing of contoured, curved and cornered bodywork. • Abrasive sheet backed with 5mm of foam to provide consistent sanding action • Innovative stearate coating reduces clogging of the abrasive resulting in longer service life • 200 perforated pads • 115mm x 125mm
Comprises plastic tray and high quality foam roller for fast application of primers to repaired areas without using the spraybooth. All parts are available separately. • High quality cored foam • Tapered end eliminates track marks • Long lasting • Can store large amounts of primer/paint • Reduces expenditure and minimizes waste • Cost effective • Provides better finish
Part No:
Description
Offer
BDPBSPR240
P240 Paper
£23.99
Part No:
Description
Offer
BDPBSPR320
P320 Paper
£23.99
BDPBRH
Replacement Roller Handle
£0.79
Foam Roller Replacements
£5.99
BDPBSPR500
P500 Paper
£23.99
BDPBRR
BDPBSFR800
P800 Film
£29.99
BDPBPRR
Foam Roller Replacements (tapered ends)
£7.99
BDPBSFR1000
P1000 Film
£29 .99
BDPBRT4
4” Roller Tray
£0.99
PANELFLEX N.R.P. FROM
£1.99
Smooth, sound and vibration reduction panels, for the application to vehicle floors, doors, wings, engine compartments, boot floors etc. • Can easily be cut into shape • Remain flexible at cold temperatures • Strong adhesive properties • Over-paintable • Self-adhesive • Panels do not need to be heated during application • Easy to apply, time and labour saving and user friendly • Reproduces O.E. quality both in appearance and effectiveness • Rubber P.U.R. based Part No:
Size
Quantity
Offer
BDPBNRP10
20cm x 50cm
Box of 10
£26.99
BDPBNRP4
50cm x 50cm
Box of 4
£23.99
OFFER
£5.49
PAINT BRUSH • A range of professional paint brushes to give optimum performance. Manufactured from 100% bristle.
PREMIUM NITRILE GLOVES
Part No: Disposable, light weight, nitrile gloves giving 3 times better puncture resistance than latex. Provide excellent protection from refinish materials but still providing excellent dexterity and comfort. The gloves are latex and powder free, thereby eliminating the risk of Type I allergic reactions. Boxes of 100 Part No
Size
BDPBPNGM
Medium
BDPBPNGL
Large
BDPBPNGEL
Extra Large
BDPBPB12
Size
Offer
12mm
£1.99
BDPBPB1
25mm
£2.99
BDPBPB112
37mm
£5.99
BDPBPB2
50mm
£6.49
BDPBPB3
75mm
£9.99
FROM
FROM
£6.10
£14.99 PLASTIC MIXING CUPS
PREMIER SOUND DEADENING PADS Patterned, sound and vibration reduction panels, for the application to vehicle floors, doors, wings, engine compartments, boot floors etc. • Can easily be cut into shape • Remain flexible at cold temperatures • Self-adhesive, strong adhesive properties • Over-paintable • Panels do not need to be heated during application • Easy to apply, time and labour saving and user friendly • Reproduces O.E. quality both in appearance and effectiveness • Bitumen / high density mineral & elastomeric mix based Offer
Part No.
Description
BDPBPSDP10
20cm x 50cm - Box of 10
£14.99
BDPBPSDP4
50cm x 50cm - Box of 4
£17 .99
OFFER
£2
.95
POLYPROPYLENE PAINT PADDLES Lightweight plastic mixing sticks, for mixing paint and other coatings. • Holes provide better agitation • Overall length 275mm • Pack of 10 Part No:
BDPBPPPR
A premium cup specifically designed for paint mixing. Featuring accurate calibrations that can be read from the inside. The flat, wide, base ensures all products are fully mixed and the cup is stable. It is available in a large range of sizes complemented by a similar range of tight fitting lids. • Versatile, easy to use, space efficient, easy to store • Less risk of spillages, secure for transportation • Suitable for both solvent and water based paint • Flat bottoms aid stirring • Protection from dust and contaminants • Compatible with ‘Colad PCLS System’ Part No: BDPBPMC350
Size
Offer
350ml (pack 50)
£6.10
BDPBPMC700
700ml (pack 50)
£8.10
BDPBPMC1400
1400ml (pack 50)
£12.10
BDPBPMC2300
2300ml (pack 50)
£18.10
MIXING BOARD OFFER
OFFER BUY BOTH FOR £9.99
New generation mixing board comprising a hard board with tear-off sheets to provide a clean mixing surface for each mixing operation. Over 100 mixing sheets
£12.99 OFFER
£3.79
Part No:
BDPBMB
OFFER
£9.99 PLASTIC FILLER SPREADERS
POWER WELD & PANEL BONDING ADHESIVE
3 beveled edges enable the user to spread body filler easily giving a better finish. Supplied in packs of 10.
A two-component structural epoxy adhesive for use in metal and composite panel bonding. • Metal to metal bonding (door skins, quarter panels, outer body panels) • Bonds steel, aluminium and SMC • High energy absorption and very good crash performance • Open time of 60 minutes, handling within 4 hours, full cure in 24 hours at 23°C • Bond line thickness is controlled by 0.25mm glass beads • Withstands automotive e-coat, powder prime, and oven temperatures up to 230°C • Spot-weldable (uncured) • Excellent corrosion protection • Low odour • 2:1 adhesive available in 2 formats Part No:
OFFER
£1.49
Part No:
BDPBBFS
OFFER
£4.20
Description
BDPBPW50 BDPBPBA195
50ml twin cartridge 195ml universal cartridge
OFFER
£12.99 PU SEAM SEALER 310ML PROFESSIONAL CAULKING GUN • Allows a consistent flow of product to give a constant even bead • Special stop system, when you stop pressing out the adhesive, the flow will stop immediately • Very high transmission, ideal for higher viscous adhesives • You can rotate the cartridge (tip) during application to keep a steady flow through 360 degrees • Suitable for cartridges up to 310ml Part No:
A multi-purpose, single component, moisture curing polyurethane seam sealer. • Over-paintable in 30 minutes, time and labour saving • Low VOC content • Excellent adhesion • Flows easily, permanently flexible • Resistant to U.V. rays • Environmentally friendly Part No:
AC GEL CLEAR 20G & AEROSOL ACTIVATOR 150ML Quick and easy to apply gel for filling scratches and grooves. Aerosol activator speeds curing time of AC Gel. Part No:
Size
BDPBACGC
AC Gel 20g
BDPBACGA
Activator 150ml
WET ON WET SEALER 290ML A high quality, professional and universal sealant based on MS Polymer technology. • Re-workable for up to 30 minutes • Solvent and isocyanate free • Is over-paintable wet-on-wet with most paint systems, including water-based systems • It can be brushed out to reproduce an O.E. finish in both appearance and effectiveness • No primer required • Remains flexible, non shrinking, can be sanded after curing • Excellent adhesion, high build properties & fills gaps • Time and labour saving, environmentally friendly • OE matching quality Part No:
Colour
BDPBWWSB
Black
BDPBWWSG
Grey
BDPBWWSW
White
BDPBWWSC
Clear
Colour
BDPBBB310
Black
BDPBBG310
Grey
BDPBBW310
White
OFFER
£119.99
BDPBPCG
OFFER
SPRAYABLE SEALER
£8.99 GREY 310ML OFFER
£24.20 PLASTIC APPLICATOR GUN 50ML Hand held, high quality manual applicator gun designed for the controlled application of two component epoxies, silicones and other materials. Use with industry standard 50ml 1:1, 2:1, 4:1, 10:1 ratio cartridges. Part No:
BDPBPAG50
1889 - 2014: 125 Years Of Experience Makes A Difference
A single component sealer specifically designed to match O.E. sprayed seams. • Excellent adhesion • Can be used on any type of car • Isocyanate and silicone free • Rapid over-paintability • Environmentally friendly • Easy to apply • Time and labour saving Part No:
BDPBSSG
PLASTIC REPAIR KIT • A complete plastic repair for structural & cosmetic repairs on bumpers, spoilers, aprons and other vehicle plastic parts. Kit includes: 2 x plastic repair adhesive rapid, standard & slow, adhesion promoter, plastic cleaner. Reinforcement film, contour film, 10 x 3mm drill bits, plastic applicator gun, mixer nozzles. Part No:
BDPBPRK
BODYTALK OFFER BUY BOTH FOR £9.50
BRUSHABLE JOINT SEALER 1KG A highly adhesive, synthetic rubber based sealant that provides a durable protective and flexible seal on overlapping seams and joints. • High adhesion • Over-paintable • Petrol, oil and water resistant • Non-shrinking and durable, permanently elastic • O.E. finish by retaining brush marks when cured • Brushes out without sagging • Easy to use, time and labour saving • Unlike many other brushable sealants it is non-stringing Part No:
BDPBBJS
Strong nylon bristled brush Enables reproduction of original factory finish Can be used to apply most brushable seam sealers Produces a better finish than a standard paint brush Part No:
2-component easy to sand, light-weight bodyfiller. Filling of dents and imperfections in surfaces such as steel and GRP. Kit includes hardener and spreader. Easy to mix and apply. Excellent filling properties. Ideally suited for larger areas. Saves time, money and materials. Can be over-painted with most paint systems. Exceptionally easy to sand, even the next day. For best results, a final application of a stopper filler is recommended. Part No:
£19.99
BDPBES7
BDPBSSB
£9.20 FINE POLYESTER STOPPER 550ML
BDPBFPSB
OFFER
OFFER
£11.50
£22.99 CV TACK CLOTH
PLASTIC BODY FILLER 600ML
Double size tack cloth ideal for use on commercial vehicles. A textured, double sized tack cloth, which is manufactured to act more like a duster, but the unique liquid resin means it will never dry out. • Ideal for large areas, long lasting, value for money, less prep time • Antistatic, no charge or residue left on vehicle • Easy to handle, liquid resin – never dries out • No contamination • Supplied in boxes of 25
Polyester filler, super adhesion flexible filler for plastic repairs in handy dispenser bag. • Ideal for flexible substrates such as bumpers, SMC & most plastics • Pin hole free polyester filler that is fast drying & easy to sand • Fills scratches & scuffs or can be used to finish a repaired area • Virtually no wasted product
Part No:
OFFER
£11.99
Pressure sensitive low-tack tack rag. Silicone free. Due to the amount of tackyfier the cloth leaves virtually no residue on the body. User friendly, doesn’t leave an unpleasant odour or stick to hands after usage. Compatible with all paint technologies, non smearing. • High dust pickup, Glides easily over the surface, used in OEM* • Supplied in packs of 50 and 25 BDPBLTTC
£9.50 ULTRA GLAZE STOPPER 500ML Bodyline Ultra Glaze Stopper is a premium self-levelling finishing glaze designed for the final skimming and direct application onto minor imperfections on bodywork. It has quick drying properties to help improve process time in the bodyshop. • Extra smooth consistency, easy to spread, reducing process time • Quick drying & over-paintable after 20 minutes at 20°C • Adheres to most substrates inc. steel, GRP, & galvanised steel • Pin hole free formula BDPBUGSB
• • • • • • • •
Unique liquid resin Non linting Antistatic Leave no residue Long lasting, value for money Less prep time No contamination No charge left on vehicle, no residue left on vehicle • Liquid resin – never dries out • Supplied in boxes of 10 BDPBTR
OFFER
£19
2-component glass fibre reinforced filler paste. For bridging of holes and rust in surfaces such as steel and GRP. Kit includes hardener and spreader. • Easy to mix and apply • Excellent adhesion to steel, aluminium & zinc coated panels • Waterproof once cured • Easily covered with standard polyester filler or can be overpainted directly Part No:
BDPBBRF4
FILLER DISPENSER
OFFER
£14.20
• Dispenser for both filler and hardener • Ensures the correct proportion of product every time • Dispenses both body filler and hardener to the correct mixing ratio • Small and portable design means it can be wall mounted or even carried to the repair Part No:
BDPBFD13
£13
BODY FILLER OFFER
Part No:
£2.49
FROM
BDPBPBFB
BDPBCTC25
LOW-TACK TACK RAG
Part No:
Part No:
OFFER
BRIDGING FILLER 1.85 LITRES OFFER
Part No:
TACK RAGS
Part No:
Multi-purpose fine polyester stopper for medium fill to skimming applications in handy dispenser bag. • Super smooth & easy to spread • Low viscosity with self-levelling properties • Excellent adhesion, adheres to steel, GRP, aluminium, galvanised steel • Pin hole free, virtually no wasted product • Very easy to sand • Can be over painted after 20 minutes at 20°C • Top quality professional performance
SEAM SEALER BRUSH • • • •
EASY SAND BODY FILLER 3.5 LITRES OFFER
2-component smooth, general-purpose polyester bodyfiller. For the filling of holes and imperfections in surfaces. Kit includes hardener and spreader. Easy to mix and apply. Ideal for dents and imperfections. Excellent adhesion to steel, aluminium & zinc coated panels. Pin-hole free finish. Ideal for larger repairs. Available in two sizes. Part No:
Size
Offer
BDPBBF4
2.2 Litres
£13.00
BDPBBF7L
3.5 Litres
£16.50
OFFER
OFFER
OFFER
£10
£10
DISPOSABLE SEAT COVERS
DISPOSABLE FLOOR MATS
HEAVY DUTY REFUSE SACKS
High-density opaque roll form seat covers. Heavy duty, 20 micron, extra large covers ideal for cars with high backed seats or head restraints. Supplied in a tough dispenser box with aperture for easy removal. • 840mm x 1300mm. • Roll of 100
Tough paper floor mats, single ply, recycled paper. Protects vehicle carpets and projects a professional image to your customers. Available in brown or white. • 380mm x 500mm • Box of 250
High density black refuse sacks, ideal for general waste. • 457 x 725 x 975mm • Roll of 100
.99
Part No:
BDPBDSC100
£12.99
.20
Part No:
Part No:
BDPBBRS
BDPBWFM250
MEET THE
WINNER
WIN 4 TICKETS
TO THE BRANDSHATCH BRITISH SUPERBIKE CHAMPIONSHIP Brown Brothers are giving away 4 Weekend Passes to the Brands Hatch British SuperBike Championship on the 18th-20th July.
Riders will compete on the Brands Hatch GP circuit, fresh from their battles at Knockhill in June. A huge well done to Gordon Daniel at Wetherby
For your chance to win this fantastic prize simply answer the below question.
Bodyshop, who was the randomly selected winner of
How long is the pot life of the new NEXA AUTOCOLOR® UV Speedprime?
the competition featured in Q1 of Bodytalk. Gordon
A) 1 hour
was presented with his Sonos 1 Speaker by our
Please send your answer to enquiries@brownbrothers.com .
Product Sales Manager, Mike Briggs. Congratulations
Closing date for entries is 30th June 2014. The winner will be announced within 30 days of the competition closing date. Terms and Conditions are available on request from your local Brown Brothers Representative.
THE DISCLAIMER BIT
Gordon!
B) 1 day
C) 1 week
BODYLINE®, BROWN BROTHERS®, NEXA AUTOCOLOR® and the PPG Logo are registered trademarks of PPG Industries Ohio Inc. Air Max Strips™ is a trademark of PPG Industries Ohio Inc. Copyright© Brown Brothers Distribution Ltd 2014. Brown Brothers Distribution Ltd is the owner or the licensee of all intellectual property rights arising out of or in connection with this document. The document and its content are protected by copyright laws. All such rights are reserved. The content of this document is provided without any guarantees, conditions or warranties as to its accuracy and, to the fullest extent permitted by law, Brown Brothers Distribution Ltd disclaims all liability and responsibility arising from any reliance placed on this document and its content. All prices are subject to change, offers expire 31st May 2014. Pictures for representation purposes only. Payment by cash on delivery, card payment or via pre-arranged account. Prices exclude VAT.
1889 - 2014: 125 Years Of Experience Makes A Difference