Full Mortise One leaf is MORTISED in the DOOR edge, the other leaf is MORTISED in the JAMB. This is the most common hinge application. Hinges priced on pages 4-5.
Wide Throw
The WIDTH of the hinge is increased (i.e. 4.5" x 6"), moving the barrel away from the face of the door. Used when additional THROW is required to clear trim or wall conditions. Full Mortise Only. Priced on pages 4-5.
Half Mortise One leaf is MORTISED in the DOOR edge, the other leaf is applied to the SURFACE (face) of the JAMB. Used when conditions prevent the jamb leaf from being mortised. Call for Quote.
Full Surface One leaf is applied to the SURFACE (face) of the DOOR; the other leaf is applied to the SURFACE (face) of the JAMB. Used when conditions prevent both hinge leaves from being mortised. Call for Quote.
Half Surface One leaf is applied to the SURFACE (face) of the DOOR, the other leaf is MORTISED in the JAMB. Used when conditions prevent the door leaf from being mortised. Call for Quote.
Swing Clear The hinge leaves are formed to locate the barrel in a position that allows the door to SWING CLEAR of the opening when opened to 90 degrees. This permits hospital beds, wheelchairs etc. to pass through the opening without hitting the hinge edge of the door. Call for Quote
Hinge Types
other specialty hinge applications available
Anchor
The hinge leaves are mortised in the door and jamb at the top corner, ANCHORING the door in the jamb. Provides reinforcement and support at the top corner where stress can occur due to high frequency service. Full Mortise only. Call for Quote
Raised Barrel Both hinge leaves are offset to RAISE the BARREL off the jamb, allowing the door to swing without the knuckles rubbing on the jamb. Used when a door is set deep into a wide frame, prohibiting the use of standard Full Mortise hinges. Full Mortise only. Call for Quote
Single Acting Spring UL listed. Adjustable Spring Tension. Full mortise standard priced on page 5. Available in Half Surface - call for quote.
Double Acting Spring
Permits doors to open in either direction and automatically return to closed position. Adjustable spring tension. Priced on page 6.
Floor Hinge
Double acting. Hold open in both directions. Mounts into cut out at bottom of door with top pivot at top corner of door. Priced on page 7.
Pivots
Spring & Gravity See page 7 for descriptions and prices.
Invisible
See page 6 for pricing and details.
800-362-9138 : www.bbwood.com : 7-B
3
RESIDENTIAL FULL MORTISE HINGES 3-1/2" hinges pictured
Shaded prices: Special Order
Call for full carton pricing - 50 per carton
List per Pair - Steel Hinges - Plain Bearing Steel
#2500 - #9611
Steel - Solid Brass
Square Corner
2500 Square
2514 Radius 1/4" 2558 Radius 5/8"
3"
3½"
4"
3½"
4"
3½"
4"
Satin Brass
-
$4
$6
$4
$6
-
-
Bright Brass
-
$7
$8
$7
$8
$11
$13
Antique Brass
-
$9
$11
$9
$11
$11
$13
Oil Rub Bronze
-
$7
$8
$7
$8
$11
$13
Satin Nickel
-
$7
$8
$7
$8
$11
$13
Antique Nickel
-
$9
$11
$9
$11
$11
$13
Bright Chrome
-
$7
$8
$7
$8
$11
$13
Satin Chrome
-
$9
$11
$9
$11
$11
$13
Flat Black
-
$9
$11
$9
$11
$11
$13
List per Pair - Solid Brass Hinges - Plain Bearing Solid Brass
#2514 - #9612
Steel - Solid Brass
1/4" Corner
#2558 - #9613
Steel - Solid Brass
5/8" Corner
9611 Square
9612 Radius 1/4" 9613 Radius 5/8"
3"
3½"
4"
3½"
4"
3½"
4"
$37
$25
$27
$25
$27
$25
$27
Antique Brass
-
$25
$27
$25
$27
$25
$27
Oil Rub Bronze
-
$25
$27
$25
$27
$25
$27
Satin Nickel
-
$25
$27
$25
$27
$25
$27
Bright Brass
Antique Nickel
-
$25
$27
$25
$27
$25
$27
Bright Chrome
-
$25
$27
$25
$27
$25
$27
Tips for Solid Brass 9611 & 9612 &9613 Add to list (per pair of hinges) $14.00
BALL TIP
STEEPLE TIP
Call for pricing on tips for steel hinges
Single Acting SPRING HINGES - Steel Double Acting Hinges see pages 6 & 7 List Per Pair
LB4310C = Square Corner LB4311C = 1/4" Radius
Gauge: 3-1/2"=.130, 4"=.130; 4-1/2"=0.134 C U/L Listed Grade 1 and BHMA/ANSI A156.17 Grade 1 certified for 1,000,000 cycles
4
LB4310C Square LB4311C Radius 1/4" 3½"
4"
4½"
3½"
4"
4½"
Satin Brass
$31
$35
$57
$31
$35
$71
Bright Brass
$46
$55
$79
$46
$55
$93
Antique Brass
$46
$55
$79
$46
$55
$93
Satin Bronze
$45
$54
$73
$45
$54
$87
Oil Rub Bronze $45
$53
$77
$45
$53
$91
Satin Nickel
$40
$48
$70
$40
$48
$84
Antique Nickel
$45
$53
$77
$45
$53
$91
Bright Chrome
$46
$55
$79
$46
$55
$93
Satin Chrome
$40
$48
$70
$40
$48
$84
Flat Black
$27
$33
$51
$27
$33
$65
7-B : www.bbwood.com : 800-362-9138
TEMPLATE FULL MORTISE HINGES Gauge:
# screw holes
3-1/2
0.123
6
4
0.130
8
4-1/2
0.134
8
Size Open
For Round Corner (1/4R) ADD $10.00 per pair For Round Corner (5/8R) ADD $10.00 per pair
0.146 8 Includes machine screws and wood screws. 5
5000, BB5000 962, BB964
5010, BB5010 *Wide Throw Hinge
Shaded prices: Special Order
List per Pair - Steel Hinges
Steel
5000 Plain Bearing
5010 Wide Throw
BB5000 BALL Bearing
BB5010 Wide Throw
3½"
4"
4½"
5"
3½"x5
4"x6
3½"
4"
4½"
5"
3½"x5
4"x6
Satin Brass
$11
$12
$14
$36
$44
$70
$29
$31
$32
$49
$72
$102
Bright Brass
$19
$20
$25
$54
$61
$89
$35
$39
$40
$75
$92
$122
Antique Brass
$21
$24
$27
$59
$69
$99
$39
$42
$44
$95
$99
Satin Bronze
$15
$18
$19
$43
$53
$82
$32
$39
$39
$57
$83
$105
Oil Rub Bronze
$19
$20
$25
$59
$69
$99
$38
$41
$41
$75
$95
$122
Satin Nickel
$16
$12
$14
$45
$53
$89
$37
$39
$39
$63
$91
$112
Antique Nickel
$19
$24
$25
$59
$69
$99
$38
$41
$44
$68
$95
$122
Bright Chrome
$19
$24
$25
$59
$61
$99
$38
$41
$44
$68
$95
$122
Satin Chrome
$19
$16
$23
$41
$53
$99
$36
$38
$38
$57
$82
$112
Flat Black
$13
$15
$16
$33
$34
$35
List per Pair - SOLID BRASS Hinges with Stainless Steel Pin BB964 BALL Bearing
962 Plain Bearing
Solid Brass
3½"
4"
4½"
5"
3½"
4"
4½"
5"
Satin Brass
$62
$62
$64
$74
$74
$74
$69
$84
Bright Brass
$29
$32
$38
$92
$40
$46
$50
$106
Antique Brass
$34
$37
$43
$42
$49
$56
Satin Bronze
$61
$62
$63
$74
$71
$76
$80
$84
Oil Rub Bronze
$31
$32
$38
$92
$42
$49
$56
$106
Satin Nickel
$31
$32
$38
$82
$42
$49
$56
$95
Antique Nickel
$31
$32
$38
$92
$42
$49
$56
$106
Bright Chrome
$31
$32
$38
$92
$42
$49
$56
$106
Satin Chrome
$63
$64
$65
$82
$83
$91
$76
$95
*Wide Throw – Width of hinge is increased, moving barrel away from the door. Used when additional throw is required to clear trim or wall conditions.
EXTRA FEATURES FOR TEMPLATE HINGES BALL TIP - STEEPLE TIP - ACORN TIP
NON-REMOVABLE PIN (NRP) (set screw in barrel, suffix NRP)
ADD $10.00 per pair of hinges Steel: ADD $28.00 per pair of hinges Brass: ADD $42.00 per pair of hinges
Allow 3 working days for NRP hinges 800-362-9138 : www.bbwood.com : 7-B
5
B&B Wood Products inc. DOUBLE ACTING SPRING HINGES #3029 - Door flange mortised in door.
Louver Door Hinge
Hinges are Non-Handed.
1515 1515H - (Hold Open) 1514 (1514H)
- Jamb flange surface applied to face of frame. - Recommend 1-1/2 pair hinges per door. Center hinge should be installed as close as possible to top hinge for support. - Hinge capacity decreases as door height decreases. #1515 - Door flange surface applied or mortised. - Jamb flange surface applied.
3029
DOOR SIZES & WEIGHTS Item Number
2 Hinges per Door
3 Hinges per Door
Maximum Maximum Maximum Maximum Minimum Door Weight Door Width Door Weight Door Width Door Thickness Door Height
1514 (1514H)
18
1'6"
--
--
7/8" to 1"
3'6"
1515 (1515H)
18
1’6"
--
--
1-1/16" to 1-1/2"
3’6"
3029-3
35
2’0"
39
2’8"
3/4" to 1"
5’0"
3029-4
60
2’4"
75
3’0"
7/8" to 1-1/4"
6’8"
3029-5
65
2’8"
93
3’0"
1-1/8" to 1-1/2"
6’8"
3029-6
75
2’8"
107
3’0"
1-1/4" to 1-3/4"
7’0"
3029-7
82
3’0"
120
3’6"
1-3/8" to 2"
7’0"
3029-8
103
3’6"
143
4’0"
1-1/2" to 2"
7’0"
3029-5x3.5*
65
2’8"
93
3’0"
1-3/8"
6’8"
3029-6x4.5*
75
2’8"
107
3’0"
1-3/4"
7’0"
3029-8x4.5*
103
3’6"
143
4’0"
1-3/4"
7’0"
*Hinges will fit into standard full mortise hinge cutout in metal door; but if standard hinge locations are furnished on 1-3/4" hollow metal doors, we recommend using 3029-8x4.5 hinges for maximum support.
List Per Pair
Shaded prices: Special Order
1515 1515H 3029-3 3029-4 3029-5 3029-5x3.5 3029-6 3029-6x4.5 3029-7 3029-8 3029-8x4.5
Satin Brass
$60 $81
$93
$135
$155
$149
$186
$185
$271
$305
Bright Brass
$67 $91
$104 $110 $152
$174
$167
$208
$207
$304
$341
$150 $158 $219
$223
$241
$268
$298
$439
$439
$96
$101 $140
$155
$154
$186
$191
$281
$305
Oil Rub Bronze
$150 $158 $219
$223
$234
$268
$298
$439
$439
Satin Nickel
$133 $140 $194
$198
$214
$238
$265
$390
$390
Antique Nickel
$150 $158 $219
$223
$241
$268
$298
$439
$439
$104 $110 $152
$155
$167
$186
$207
$305
$305
$123 $129 $179
$198
$197
$238
$244
$359
$390
$83
$124
$134
$149
$166
$244
$244
Antique Brass Satin Bronze
Zinc Plated
$62 $84
$67 $91
Satin Chrome Flat Black
$57 $74
$98
$88
$122
1514 & 1514H are SPECIAL ORDER use same prices as 1515 and 1515H
6
7-B : www.bbwood.com : 800-362-9138
B&B Wood Products inc. DOUBLE ACTING FLOOR HINGES 7811 Ball Bearing Floor Mount For 1-3/8" to 1-3/4" Doors •STEEL MECHANISM •DOUBLE ACTING •ANTI FRICTION BEARING •ADJUSTABLE SPRING TENSION •HOLD OPEN AT APPROXIMATELY 85 DEGREES •NON-HANDED •MAXIMUM DOOR WIDTH 3'0" •WEIGHTS UP TO 90 LBS *
(included in 7811)
Shaded prices: Special Order 7811 7813HD 7805
ANSI K82193 Replacement Side Plates: $30.00 pair
JAMB MOUNT: Jamb brackets (7805) may be purchased as a separate item to allow conversion of any pivot from the standard floor mount to jamb mounted. HEAVY DUTY: *7813HD hinge can be used for doors up to 150 lbs. 7813HD does not have a hold open feature.
Satin Brass
$77
$143
$10
Bright Brass
$95
$175
$12
Antique Brass
$98
$175
$14
Satin Bronze
$80
$143
$10
Oil Rub Bronze
$112
$208
$15
Satin Nickel
$102
$188
$13
Antique Nickel
$116
$208
$16
Bright Chrome
$112
$208
$12
Satin Chrome
$92
$188
$13
Flat Black
$91
$143
$11
GRAVITY PIVOTS #7512-H: Special Order
7512-H PIVOT
Hold Open at 90 Degrees
List
• STEEL • DOUBLE ACTING • DOOR WEIGHT CLOSES DOOR - NO SPRING • NON-HANDED • MAXIMUM DOOR SIZE AND WEIGHT WIDTH - 30” WEIGHT - 50 lbs. • FLAT DOOR BRACKET - DOORS 7/8” TO 1 5/8” THICK • FLAT JAMB BRACKET - 1 1/4” WIDE Notes: Round jamb edge of door 7/8" radius. Top clearance required 3/4" (5/8" lift). Pivot side of door to jamb requires 5/32". Made in USA.
SWING and STAY #173-823 Satin Brass Finish.
List Price $25.00 • 3/4" to 1-3/8" thick • up to 50 Lbs.
Satin Brass
$49
Bright Brass
$55
Antique Brass
$55
Satin Bronze
$49
Oil Rub Bronze
$71
Satin Nickel
$63
Antique Nickel
$71
Zinc Plated
$71
Satin Chrome
$63
Flat Black
$49
Includes enough hinges to do one pair of cafe doors. Clearance needed between jamb and panel
Panel thickness 3/4" 1-1/8" 1-3/8"
Clearance 1/4" 3/8" 1/2"
800-362-9138 : www.bbwood.com : 7-B
7
HINGE
203
204
208
212
216
218
220
A
1/2"
1/2"
5/8"
3/4"
1"
1-1/8"
1-3/8"
7/8"
1-1/16"
4-5/8"
5-1/2"
B
29/64" 17/32" 23-32"
C
1-3/4" 2-3/8" 2-3/4" 3-3/4" 4-5/8"
D
23/64" 23/64" 9/64"
5/32"
7/32"
3/8"
1/2"
E
5/32"
3/16"
1/4"
1/4"
9/32"
F
1-11/32"
2-1/16"
2-19/32"
3/64"
3/64"
1-16"
1/16"
2-7/16" 2-15/16"
G
1/32"
H
23/32" 23/32" 29/32" 1-5/64" 1-7/16" 1-19/32" 1-15/16"
I
9/32" 3/4"
Min Wood Thick
3/4"
1"
3/8"
3/64"
15/32" 13/32"
1-1/8" 1-3/8"
1/16" 15/32"
1-3/4"
2"
List Per Pair
FINISH Satin Brass
$25
$32
$39
$72
$106
$192
$184
Bright Brass
$55
$63
$81
$128
$183
$192
$282
Ant Brass
$64
$72
$107
$157
$202
$207
$291
Oil Rub Brz
$64
$72
$107
$157
$202
$207
$291
Satin Nickel
$35
$41
$49
$83
$129
$139
$232
Bright Chrome $55
$63
$83
$128
$183
$192
$282
Satin Chrome
$26
$33
$40
$72
$106
$192
$184
Black
$33
$36
$46
$78
$118
$124
$195
CHOOSING THE RIGHT SOSS HINGE FOR THE JOB DIRECTIONS: After determining the weight and width of the door, locate the value of the two scales and connect with a straight line that continues to line”A”. Draw a line perpendicular to the rules in the table until you reach the proper wood thickness. Use the number and size indicated on this line
RECOMMENDED SPACING The “center” hinge should be located ½ the distance from the horizontal centerline of the door to the centerline of the top hinge. On installations requiring 4 hinges, the second hinge from the top should be located ½ the distance from the door’s horizontal center line to the center line of the top hinge. The third hinge from the top should be located ¼ of the ”B” dimension below the horizontal centerline of the door.
8
SOSS INVISIBLE HINGES
7-B : www.bbwood.com : 800-362-9138
Minimum Door Thickness
Shaded PRICES are special order
B&B Wood Products inc.
SOSS Invisible Spring Closer Hinge The closure rate is adjustable with an allen wrench after installation, and does not require removal of the closer. Installation can be either inside the door or inside the door jamb. Allow one spring closer for each 75lbs of door weight for all spring closers The closer is ideally suited for all types of doors 1-3/8” thick or more. Recommended spacing is one half of the distance from the center of the door to the center of the top hinge.
List EACH
Special Order
Door Thickness
Closer # Description
A
B
C
D
13/8"
216IC
Spring Closer with regular hinge
17/16"
3/8" 6-1/4” 3/4”
13/4"
218IC
Spring Closer with regular hinge
141/64" 3/8"
7"
1"
2"
220IC
Spring Closer with regular hinge
115/16" 3/8"
7"
1"
216IC 218IC 220IC
Satin Brass
$158
$175
$215
Bright Brass
$199
$214
$264
Ant Brass, Oil RubBrz
$211
$228
$264
Satin Nickel
$168
$187
$236
Bright Chrome
$199
$214
$264
Satin Chrome
$158
$175
$215
Black
$163
$179
$206
SOSS FIRE Rated Invisible Hinges Special door and jamb preparation is required for all fire-rated hardware. Use at least one fire-rated hinge for every 20" of door height or portion thereof, or one hinge for every 60 lb. or fraction thereof, whichever calculation demands more hinges. #418, #420: are not to be used on a door that normally is held open. Satin Brass #420 is square corner Bright Brass Door Rating Min Door Hinge # Description
Material
Minutes
Thickness
218FR
#218 Hinge with UL Rating
wood/metal
20/20
1-3/4"
220FR
#220 Hinge with UL Rating
wood/metal
20/20
2"
418
like to 218 but made of Alloy Steel wood/metal
90/180*
1-3/4"
420
like to 220 but made of Alloy Steel wood/metal
20/180
2"
Special Order
List Per Pair 216FR 218FR 220FR $113
$119
$190
$190
$198
$288
Ant Brass, Oil RubBrz
$203
$225
$289
Satin Nickel
$133
$143
$232
Bright Chrome
$190
$198
$288
Satin Chrome
$113
$119
Black
$122
$128
418
420
$558
$619
$190
$474
$619
$196
$576
$633
*The #418 SOSS hinge (not with closer) is for use on 90 minute wood faced doors constructed to Georgia Pacific specifications utilizing 2" No. 10 screws; the hinge style must be a minimum of 2-3/16" wide. This may be made up from two pieces of 1" firestop and 3/16" of wood.
PATH AND CLEARANCE FOR SOSS INVISIBLE HINGES The diagram shows the typical path of a SOSS hinged door. The table shows the door clearance when fully opened for each SOSS hinge.
800-362-9138 : www.bbwood.com : 7-B
9
Strap Hinges - for Interior & Exterior Doors Removable pin and reversible pads for full or half surface application. Using three hinges, 9", 10", 13" and 17-3/4" suitable for 1-3/8" x 32" doors up to 90 lbs. 15-5/8", 17", 19-5/8" and 20-1/2" straps suitable for doors 1-3/4" thick x 36" wide up to 175 lbs.
Rough Iron
Smooth Iron
R5,R6 R7,R8
A5, A6 A8
RG RH Item R5 R6 R7 R8 RG RH
Length Height Pad Width Pad 9" 3-1/8" 1-3/8" 13" 3-1/8" 1-3/8" 17" 4" 2" 20-1/2" 4" 2" 15-5/8" 4" 2" 19-5/8" 4" 2"
AN AP
Gauge Black 0.120 $24 List 0.120 $24 Each 0.16 $44 0.16 $48 0.16 $45 Shaded Prices: Special Order 0.16 $45
Item A5 A6 A8 AN AP
Length Height Pad Width Pad 10" 3-1/8" 1-3/8" 13" 3-1/8" 1-3/8" 17-3/4" 3-1/8" 1-3/8" 15-5/8" 4" 2" 19-5/8" 4" 2"
Gauge Black 0.120 $23 0.120 $24 0.120 $24 0.16 $44 0.16 $44
Dummy Hinge Straps - for use with butt hinges
AB AD AF
R1, R2, R3, RC, RD Item R1 R2 R3 RC RD
Length Strap Width at Hinge Gauge Black List 22-1/4" 1-9/16" 0.16 $26 Each 18-3/4" 1-9/16" 0.16 $24 28-5/16" 3" 0.16 $57 Shaded Prices: 8-3/4" 1-3/8" 0.16 $12 Special Order 14-1/4" 1-3/8" 0.16 $12
Item AB AD AF
Length 14" 18-3/4" 24"
Strap Width at Hinge Gauge Black
1-5/8" 1-5/8" 1-3/4"
0.16 $17 0.16 $20 Alum $47
All Strap Hinges: Rust Color is the same price as Black; Add 75% for the following finishes and allow 6 weeks: Antique Copper, Antique Brass, Antique Pewter, Brushed Nickel, Oil Rub Bronze.
Black Clavos & Grilles
Round: 3/4", 1-1/8", 1-5/8"
Pyramid: 1", 1-5/8" Square: 1-1/8", 1-5/8"
1" pyramid
$6.10
Description
List Ea.
Grill
2x10x12½”
$212.50 CL158P 1-5/8" pyramid
CL34R
3/4" round
$8.30
$5.20 CL118S 1-1/8" square
$8.30
CL118R 1-1/8" round
$6.90 CL158S 1-5/8" square
$8.30
CL158R 1-5/8" round
$8.30
Black Grill 2x10x12½”
Continuous Hinges Gauge .040
List Price Each
10
CL1P
Item
7-B : www.bbwood.com : 800-362-9138
ITEM
Open Width
Length
BRASS
NICKEL
H11636
1-1/16"
36"
$6
$6
H11648
1-1/16"
48"
$7
$7
H11672
1-1/16"
72"
$11
$11
H11436
1-1/4"
36"
$7
$7
H11448
1-1/4"
48"
$8
$8
H11472
1-1/4"
72"
$11
$11
H11236
1-1/2"
36"
$7
$7
H11248
1-1/2"
48"
$8
$8
H11272
1-1/2"
72"
$11
$11
H20036
2"
36"
$9
$9
H20048
2"
48"
$11
$11
H20072
2"
72"
$17
$17
ANSI/BHMA/BBW US Equivalent
Base Material
505
-
600
USP
Primed for painting
Steel
603
US2G
Zinc plated
Steel
604
US2G
Zinc plated and dichromate sealed
Steel
Bright Brass, clear coated
Brass
605
Bright Brass, Lifetime Finish (PVD)
606
US4
Satin Brass, clear coated
Brass
609
US5
Antique Brass (Satin brass, blackened, satin relieved, clear coated)
Brass
611
US9
Bright Bronze, clear coated
Bronze
612
US10
Satin Bronze, clear coated
Bronze
613
US10B
Oil Rubbed Bronze (Dark oxidized satin bronze, oil rubbed) **
Bronze
618
US14
Bright nickel plated, clear coated
Brass, Bronze
619
US15
Satin Nickel plated, clear coated
Brass, Bronze
620
US15A
Antique Nickel (satin nickel plated, blackened, satin relieved, clear coated )
Brass, Bronze
Flat Black Coated
Brass, Bronze
Dark oxidized, statuary bronze, clear coated
Bronze
622
US19
624
US20A
625
US26
Bright Chrome plated
Brass, Bronze
626
US26D
Satin Chrome plated
Brass, Bronze
627
US27
Satin aluminum, clear anodized Aluminum
Aluminum
628
US28
Satin Aluminum, clear anodized
Aluminum
629
US32
Bright stainless steel
Stainless steel
630
US32D
Satin stainless steel
Stainless steel
631
US19
Flat Black Coated
Steel
632
US3
Plated bright brass, clear coated
Steel
633
US4
Plated satin brass, clear coated
Steel
638
US5
Plated satin brass, blackened, satin relieved, clear coated
Steel
639
US10
Plated satin bronze, clear coated
Steel
640
US10B
Oxidized satin bronze plated over copper plate, oil rubbed
Steel
645
US14
Bright nickel plated, clear coated
Steel
646
US15
Satin nickel plated, clear coated
Steel
647
US15A
Satin nickel plated, blackened, satin relieved, clear coated
Steel
650
US20A
Plated dark oxidized statuary bronze, clear coated
Steel
651
US26
Bright chromium plated
Steel
652
US26D
Satin chromium plated
Steel
666
US3
Plated bright brass, clear coated
Aluminum
667
US4
Plated satin brass, clear coated
Aluminum
668
US10
Plated satin bronze, clear coated
Aluminum
669
US14
Bright nickel plated
Aluminum
670
US15
Satin nickel plated
Aluminum
671
US19
Flat Black Coated
Aluminum
672
US26
Bright chromium plated
Aluminum
Aluminum clear coated
Aluminum
673 674
USP
Primed for painting
Zinc
676
US19
Flat Black Coated
Zinc
688
US4
Satin aluminum, gold anodized
Aluminum
689
US28
Aluminum painted
Any
690
US20
Dark bronze painted
Any
691
US10
Light bronze painted
Any
693
Black painted
Any
695
Dark bronze painted
Any
Satin brass painted
Any
696 716
2
Finish Key
Finish Description
US4
Aged Bronze
** These finishes are a "living finish" and will change color over time 7-B : www.bbwood.com : 800-362-9138