INFLATABLE RESCUE TENTS
■ Easy deployment within a few minutes after being connected to air supply ■ Inflatable with pressure air or electrical blower ■ Quick-coupling device to connect the pressure air supply ■ Safety relief valve ■ Inflatable structure with two-chambers ■ High air tightness and strength of the inflatable structure ■ Tent roof made from PVC coated fabric in white, yellow, orange, red, khaki green colours ■ Tent floor made from a high-strength material with antiskid treatment ■ Tent entrance is equipped with zip fasteners, at the floor there are reversible canvas fasteners with rings ■ Ground fastening flaps and guy ropes on support arches of the structure to secure the stability in all weathers, on a hard surface the tent can be anchored by means of weight bags filled with water or any other weight placed on the ground fastening flaps
■ Venting mesh over the entrance to ensure a natural air exchange ■ Side walls contain 2 closable openings with diameter 350 mm to connect heating, air condition ■ Side walls contain 2 closable openings with diameter 150 mm to connect electro installation cables, hoses ■ Anchor and repair set and hand pump are included ■ Packed in a transport bag ■ Ideal base during a rescue action ■ For short-term and long-term use in many areas – in case of events with an immediate need for hinterlands, for accommodation of people, material storage and similar. ■ Long lifetime with only minimum maintenance and repair required ■ Selection from many types, sizes and colours ■ Easy handling and operation ■ Service centre in the manufacturer´s plant
■ On the structure inside the tent, there are fastening straps for lamps, devices and similar
1
2
3
4
5
6
7
8
On request
Material used
■ Three-layers windows – roof material, film, net
■ Floor – PES textile double-sided PVC coating, high-strength, abrasion proof, water-proof, with anti-skid modification, surface weight approx. 520 g/m2
■ Removable floor, i.e. attached by means of Velcro ■ Removable hygiene liner ■ Removable insulation liner
■ Inflatable frame – PAD fabric double-sided rubber mixture coating, high strength, abrasion resistant, air-proof
■ Lengthwise or crosswise partition curtains to divide the inner space
■ Internal partition curtain – PES fabric one-side PUR coating, water-proof
■ Connecting passages for connection of tents into bigger units and combinations, e.g. field hospitals
■ Isolating liner – Quilted material consisting of three layers: PES fabric, PES fleece and PES fabric resp. non-woven, surface weight approx. 250 g/m2
■ Connecting passage for connection between tent and container ■ Front shelter for container
Roof:
■ Side (technical) entrance
■ PES fabric one-sided PVC coating, high-strength, water-proof, surface weight approx. 300 g/m2, or
■ Weight bags to be filled with water for anchoring the tent on a hard surface
■ PES fabric double-sided PVC coating, high-strength, water-proof, surface weight approx. 420 g/m2, or
Additional accessories:
■ PES fabric double-sided PVC coating, high-strength, water-proof, self extinguishing, surface weight approx. 700 g/m2
- heating - air condition - additional solid floor - lamps etc.
■ Internal partition curtain – PES fabric one-side PUR coating, water-proof. ■ Isolating liner – Quilted material consisting of three layers: PES fabric, PES fleece and PES fabric resp. non-woven, surface weight approx. 250 g/m2.
Fastening for lamps
Venting mesh
Opening for heating
Accessories for the tent
BCB International Ltd. Clydesmuir Road, Cardiff CF24 2QS UK Tel: +44 (0)2920 433 700 Fax: +44 (0)2920 433 701 Email: info@bcbin.com
www.bcbin.com