WARE HANDLING MACHINES • TRANSFER WHEEL • CROSS CONVEYOR • SERVO STACKER DUAL AXIS
“BDF S.D.A. 02” SERVO STACKER DUAL AXIS
General Features • Rotation and arm movements controlled by two identical brushless servo motors • Installed on rails with easy and quick withdrawal system
• • • •
• Push-bar (optional) with variable step inserts and ready to accept different type of inserts • Inserts in graphite (optional) with easy change system
• User-friendly operator interface • Programming, saving, loading of configuration and production data • Stabilization bar (optional) with height adjustment
Reduced time to replace the push-bar Accurate and absolutely repeatable movements Extremely reduced maintenance Different types of cycle synchronization
Technical Data CYCLE SPEED
• up to 14 cycles per minute
CROSS CONVEYOR SPEED
• up to 45 m/min
GLASS CONTAINERS MAX. HEIGHT
• 450 mm
PUSH-BAR:
• Max. width 4500 mm • Min. inserts centres distance: 60 mm • Inserts step: 20 mm
STROKE IN LEHR DIRECTION
• 415 mm
SIDE SHIFT STROKE
• 430 mm
ADMISSIBLE LEHR BELT HEIGHT
• 800 ÷ 950 mm
MIN. FINGERS QUOTE
• 825 ÷ 980 mm
OVERALL DIMENSIONS LENGTH (IN LEHR DIRECTION):
• Machine structure: 2870 mm
Transfer Wheel TR 96-888
General Features
Technical Data
• Use of different finger type: - “V” type for normal bottles - “L” openable type for unstable bottles • Different finger sizes for each finger type • 4 finger spacing configurations • Quick-change fingers • Finger lenght adjustable
• For ware dimension from 30 mm up to 116 mm • Max speed 250 bottles per minute
“L” openable finger type
• Very good ware release on the cross conveyor do to the self fingers opening made by the ware and finger relative speed change on the cross conveyor • Reduced job change time • Reduced setup time • Quick-change fingers spacing • Very low maintenance
CROSS CONVEYOR Type 3800
General Features • Simple and strong construction • Individual adjustable sections on the structure • Adjustable cross conveyor height • Dead plates in refractory steel • Supplied for all lehr widths
Divided in individual adjustable sections to correct possible structural deformations due to the heat given off by the annealing lehr
• Low maintenance • Reduced wearing parts
Technical Data DELIVERY LAYOUT
• LH or RH
MIN. LEHR BELT HEIGHT (H)
• 800 mm
BELT LINEAR SPEED RANGE
• 2 ÷ 30 m/min
BELT
• Chain: silent type • Width: 6” - 152,4 mm (standard) • Pitch: ½”
DRIVE SYSTEM
• Oscillating drive group for belt constant self-tensioning • Drive group: gear reducer directly coupled to the motor (when run by an electronic drive system; motor not supplied) • Option for drive group: motor-variator (for manual speed setup; motor included)
CONNECTION TO THE ANNEALING LEHR
• Refractory steel dead plates • Each plate is freely connected to the cross conveyor frame by means of two pins and, on the opposite side, it lays on the lehr belt
MECHANISM REQUIREMENTS
• Connection to the Lincoln lubrication system
CROSS CONVEYOR Type 3900 Water Cooled
General Features • Simple and strong construction • The silent chain slides on modular wearing plates (300 mm long each one) placed on the beam
• The idler sprocket axis is adjustable both vertically and transversally to allow corrections of deviations and to get optimal positioning of the chain
• Adjustable cross conveyor height • Easy and quick adjustable dead plates in refractory steel • Supplied for all lehr widths
Steel square tube water cooled to allow a suitable cooling in such way to avoid possible structural deformations due to the heat given off by the annealing lehr.
• Low maintenance • Reduced wearing parts
Technical Data DELIVERY LAYOUT
• LH or RH
MIN. LEHR BELT HEIGHT (H)
• 800 mm
BELT LINEAR SPEED RANGE
• 2 ÷ 30 m/min
BELT
• Chain: silent type • Width: 6” - 152,4 mm (standard) • Pitch: ½” • Option: steel wire-mesh belt
DRIVE SYSTEM
• Oscillating drive group for belt constant self-tensioning • Drive group: gear reducer directly coupled to the motor (when run by an electronic drive system; motor not supplied) • Option for drive group: motor-variator (for manual speed setup; motor included)
CONNECTION TO THE ANNEALING LEHR
• Refractory steel dead plates • Each plate is freely connected to the cross conveyor frame by means of two pins and, on the opposite side, it lays on the lehr belt • An adjusting device to be operated from outside the cross conveyor allows to adjust the height of the plates for an optimal connection between cross conveyor and lehr
MECHANISM REQUIREMENTS
• Connection to the Lincoln lubrication system • Water flow: max. 30 litres/min • Water connections: G 1”½ (valves and water control system not included)
BDF in the world
companies representative offices
MOSCOW
MÜNCHEN
SHANGHAI MEXICO CITY
foshan
BDF CZECH
BUENOS AIRES
MCR SYSTEMS
BDF
BDF SERVIS
TDE MACNO
www.bdf.it BDF INDUSTRIES S.p.A. - Head Office and Sales Department Via dell’Industria, 40 - 36100 Vicenza - Italy phone +39 0444.286.100 - fax +39 0444.286.299 - e-mail: bdf@bdf.it
studiobrand.it
GTECH