/////////////////////////
DIY made easy!
Check out our huge range of DIY videos on our website
Sealing natural stone We insist that all natural stone must be sealed to protect and extend the life of the stone. Sealing your stone gives it the absolute best protection against stains and dirts, and makes cleaning so much easier. Beaumont Outdoor use and recommend Aqua Mix. Sealers are generally applied using a roller or spray pack depending on the size of the job. The surface must be clean and dry. Never seal outdoors if rain is predicted within 12 hours. Never seal in extreme heat. Do not seal in windy conditions. Always test the sealer in a corner before applying to large areas. There are two sealers we recommend, depending on the finish you want for your natural stone.
Natural Look Sealer: Sealer’s Choice Gold – Rapid Cure A premium, no sheen, natural look, water based, penetrating sealer formulated to provide maximum stain protection. May be used as a pre-grouting sealer. Allows moisture vapour transmission. Protects in less than 4 hours. Safe to use, low odour, low VOCs. Designed to achieve optimal penetration into dense, low-porosity surfaces. Lasts up to 15 years. For interior and exterior use with Beaumont Stone and Beaumont Engineered Stone Pavers.
Enhanced Look Sealer: Enrich ‘N’ Seal A premium, no sheen, enhanced-look, penetrating sealer formulated to darken, enrich, and highlight the character of unsealed natural stone. Rejuvenates the colour and improves the appearance of worn and weathered stone. May also be used as a pregrouting sealer. Allows moisture-vapour transmission. Effectively seals and darkens the colour of grout joints. Lasts up to 15 years. For interior and exterior use with Beaumont Stone. Not suitable for Beaumont Engineered Stone.