INTRODUCTION Caymon’s designers are convinced that one of the most important indicators to identify a company, is its customers: the people that once bought our products for the first time and experienced them in everyday life, getting to know them better, and eventually keep buying them. At this moment, Caymon offers a vast range of installation products, ranging from racks, microphone, music and speaker stands to brackets, flight cases, adaptors, soft bags and accessories. This assortment for its part reflects on their variety of customers and thus applications, which vary from churches to concert halls, from nightclubs to cultural centres, from individual musicians to symphonic orchestras.
An extensive product range requires a clear vision on past, present and future. That’s why, many years ago, Caymon’s foundation was based on four solid principles, which have been our company standards ever since: the aim to look ahead and anticipate worldwide tendencies, the aspiration to combine functionality with contemporary design, the decision to settle for no less than the highest quality and the continuous keeping in mind of our existing, new and potential customers. These standards remind us where we’re coming from and what we’re aiming for, in an ever-changing, ever-innovating market.
TABLE OF CONTENT 19” RACKS & ACCESSORIES
SPR SERIES 8 GPR SERIES 10 OPR SERIES 12 DPR SERIES 13 WPR SERIES 14 HPR SERIES 15 EPR SERIES 16 PR SERIES 17 SPR,WPR & HPR ACCESSORIES 18 BLIND PLATES 20 CABLE ORGANIZERS 21 SCREWS & CAGE NUTS 21 RACK PLATES 22 POWER DISTRIBUTION 23 RACK SHELVES 24 DRAWERS 25
MODULAR SOLUTIONS
CHASSIS & STRAIN RELIEF 28 TABLE & WALL MOUNT 29 ELEMENTS 30 MICROPHONE STANDS & ACCESSORIES SPEAKER STANDS
STANDS FLIGHTCASES
ACCESSORIES
36 39
FC SERIES | 500 MM DEPTH 42 FCX SERIES | 360MM DEPTH 44 FCE SERIES | EUROPALLET COMPATIBLE 46 FCP SERIES | FLATSCREEN CASES 48 ACCESSORIES 50 FCMK & FCMC SERIES | MIC CASES 51 FCC SERIES | REMOVABLE TOP 52 FCS SERIES | DJ FLIGHTCASES 54 SOFT BAGS RIGGINGS & BRACKETS
56 62
19” RACKS & ACCESSORIES
19” RACKS & ACCESSORIES
SPR SERIES Optimal protection in fixed installations is guaranteed with the SPR series 19” racks which are compliant to ANSI/EIA RS-310D, DIN41491 and IEC60297 standards and come available in a wide range of heights and depths. They are constructed using a cold rolled steel frame with a thickness of 2 mm and 1,2 mm plates finished in a black (RAL9004) powder coating with fine structure. They come standard with a reversible tempered glass front and steel rear door, both fitted with easy-swing locks. Other features for this product range are removable sides, in depth adjustable 19” profiles, included leveling feet and wheels, ...
SPR618
SPR627
19” rack 18 units 600 mm depth
19” rack 27 units 600 mm depth
SPR632
19” rack 32 units 600 mm depth
SPR832
SPR642
19” rack 32 units 800 mm depth
19” rack 42 units 600 mm depth
SPR842
19” rack 42 units 800 mm depth
Specifications Keylock on both doors and side panels
•
Reversible door position
•
In depth adjustable 19” profiles (front & rear)
•
Cable entry on top & bottom
•
Ventilation grid on top
•
50 mm wheels + leveling feet included
85 kg
•
Punched square holes for use with snap-in cage nuts
98 kg
•
Static load up to 800 kg
DIMENSIONS (H x W x D)
USABLE DEPTH
HEIGHT WITH WHEELS
WEIGHT
SPR618
918 x 600 x 600 mm
540 mm
988 mm
52 kg
SPR627
1318 x 600 x 600 mm
540 mm
1388 mm
57 kg
SPR632
1540 x 600 x 600 mm
540 mm
1610 mm
74 kg
SPR832
1540 x 600 x 800 mm
740 mm
1610 mm
82 kg
SPR642
1985 x 600 x 600 mm
540 mm
2055 mm
SPR842
1985 x 600 x 800 mm
740 mm
2055 mm
Removable sides
8
•
ARTICLE
Unit measurement indicator
Grill door option
SPRxxGL
SPR OPTIONAL GRILL DOORS SPR18GL Grill door for SPR618 SPR27GL Grill door for SPR627 SPR32GL Grill door for SPR632/832 SPR42GL Grill door for SPR642/842
9
19” RACKS & ACCESSORIES
GPR SERIES Flush installation of 19” equipment is made possible using the GPR series racks which are compliant to ANSI/EIA RS-310D, DIN41491 and IEC60297 standards. The slide-out construction allows rack integration into walls or furniture, while keeping the rear side of the equipment accessible for maintenance and servicing. The extending equipment bay rotates over a 90° angle in either direction, while a rear cable support allows effective cable management. They come available in various heights ranging from 12 up to 24 rack space.
GPR412
GPR418
19” slide out rack 12 units 420 mm depth
19” slide out rack 18 units 420 mm depth
GPR424
19” slide out rack 24 units 420 mm depth
Specifications
10
ARTICLE
DIMENSIONS (H x W x D)
USABLE DEPTH
MAX LOAD
GPR412
610 x 503 x 580 mm
420 mm
60 kg
GPR418
880 x 503 x 580 mm
420 mm
60 kg
GPR424
1150 x 503 x 580 mm
420 mm
60 kg
QuadriTM slide technology
•
In-wall / furniture integration for 19” equipment
•
Extending equipment bay
•
Locks in extended position for simplified installation
•
Rear support for cable management
•
Max load up to 60 Kg
Locks in extended position
11
19” RACKS & ACCESSORIES
OPR SERIES The OPR series are solid constructed open-frame racks for 19” equipment compliant to ANSI/EIA RS-310D, DIN41491 and IEC60297 standards which are suitable for wall mounted or floor standing installation. The rugged construction made of 2.5 mm thick steel allows pre-loading of the equipment before transportation to the installation site. Finishing is done in a black (RAL9004) powder coating with fine structure while punched equipment mounting profiles on front and both sides offer a multifunctional use of the cabinet. Delivered in a flat-down package, the simple structure allows assembly by a single person in a record-breaking time. Available in various heights from 6 up to 18 rack space.
OPR506
19” open-frame rack 6 units 500 mm depth
OPR509
OPR512
19” open-frame rack 9 units 500 mm depth
19” open-frame rack 12 units 500 mm depth
OPR518
19” open-frame rack 18 units 500 mm depth
Specifications
12
ARTICLE
DIMENSIONS (H x W x D)
USABLE DEPTH
MAX LOAD
OPR506
395 x 520 x 515 mm
500 mm
400 kg
OPR509
530 x 520 x 515 mm
500 mm
400 kg
OPR512
665 x 520 x 515 mm
500 mm
400 kg
OPR516
935 x 520 x 515 mm
500 mm
400 kg
•
Solid constructed (2.5 mm steel)
•
Flat-down package
•
Floor standing & wall mounting use
•
Simple structure
•
Assembly in a record breaking time by a single person
•
Stand alone & in-furniture integration
•
Unrestricted air flow due to open frame design
DPR SERIES A sturdy and low-cost solution for installation of a large number of 19” equipment is offered by the DPR 4-post open frame rack series which are compliant to ANSI/EIA RS-310D, DIN41491 and IEC60297 standards. The open frame construction is made of solid steel and finished in a black (RAL9004) powder coating with fine structure . Adjustable vertical supports allow in depth adjustment within a range of 55 to 101.5 cm. Delivery in a flat-down package allows easy transportation of the rack to any installation location. Available in heights of 32 and 42 rack space.
DPR932
DPR942
4-post 19” open-frame rack 32 units 550 - 1015 mm depth
4-post 19” open -rame rack 42 units 550 - 1015 mm depth
Specifications ARTICLE
DIMENSIONS (H x W x D)
USABLE DEPTH
MAX LOAD
•
Sturdy & low cost solution
DPR932
1555 x 558 ~ 1023 x 600 mm
550 ~ 1015 mm
450 kg
•
In depth adjustment (55 ~ 101.5 cm)
DPR942
2000 x 558 ~ 1023 x 600 mm
550 ~ 1015 mm
450 kg
•
Flat-down package
•
Unrestricted air flow due to open frame design
DPR modular racks
13
19” RACKS & ACCESSORIES
WPR SERIES Maximum installation flexibility is guaranteed with the WPR series wall mountable 19” racks which are compliant to ANSI/EIA RS-310D, DIN41491 and IEC60297 standards. Their flexible structure allows installation at any location while their different heights and depths provide a solution for a wide variation of applications. They are constructed using a cold rolled steel frame with a thickness of 1,5 mm and 1,2 mm plates, finished in a black (RAL9004) powder coating. The front is finished with a reversible tempered glass front door with a wing-knob lock. Other features for this product range are removable and lockable sides, in depth adjustable 19” profiles, ventilation grid in top panel, ...
WPR406
WPR606
19” wall rack 6 units 450 mm depth
19” wall rack 6 units 600 mm depth
WPR409
WPR609
19” wall rack 9 units 450 mm depth
WPR412
19” wall rack 9 units 600 mm depth
19” wall rack 12 units 450 mm depth
WPR612
19” wall rack 12 units 600 mm depth
Specifications ARTICLE
DIMENSIONS (H x W x D)
MAX LOAD
WEIGHT
•
Reversible door position In depth adjustable 19” profiles
WPR406
368 x 600 x 450 mm
410 mm
60 kg
18,5 kg
•
WPR409
501 x 600 x 450 mm
410 mm
60 kg
22,3 kg
•
Side panels with security key
WPR412
635 x 600 x 450 mm
410 mm
60 kg
25,7 kg
•
Cable entry on top, bottom and back
WPR606
368 x 600 x 600 mm
560 mm
60 kg
20,4 kg
•
Ventilation grid on top
WPR609
501 x 600 x 600 mm
560 mm
60 kg
26 kg
•
Punched square holes for use with snap-in cage nuts
WPR612
635 x 600 x 600 mm
560 mm
60 kg
30 kg
•
Static load up to 60 Kg
•
ANSI/EIA RS- 310D, DIN41491 and IEC60297 standard
Removable side frames
14
USABLE DEPTH
Wing knob lock
Ventilation grid
HPR SERIES Professional 19” double section wall rack cabinet which complies to ANSI/EIA RS-310D, DIN41491 and IEC60297 standards. It ensures maximum installation, connectivity and maintenance ease. The solid construction made of a 1,5 mm thick steel frame and 1,2 mm thick plates is finished with a black (RAL9004) fine structured powder coating. It provides a stable and secure installation while the double section structure allows easy access to the rear side of the equipment. The tempered smokey glass front door is reversible and secured with a key lock which keeps the equipment accessible for authorized persons only.
HPR506
DOUBLE SECTION 19” RACK - 6 UNITS The HPR506 is a professional 19” double section wall rack cabinet which ensures maximum installation, connectivity and maintenance ease storing up to 6 units of 19” equipment. Specifications
HPR509
DIMENSIONS (H x W x D)
USABLE DEPTH
MAX LOAD
WEIGHT
368 x 600 x 550 mm
410 mm
60 kg
22,2 kg
DOUBLE SECTION 19” RACK - 9 UNITS The HPR509 is a professional 19” double section wall rack cabinet which ensures maximum installation, connectivity and maintenance ease storing up to 9 units of 19” equipment. Specifications DIMENSIONS (H x W x D)
USABLE DEPTH
MAX LOAD
WEIGHT
501 x 600 x 550 mm
410 mm
60 kg
26,8 kg
15
19” RACKS & ACCESSORIES
EPR SERIES The best economical solution is guaranteed using the EPR series wall mountable 19” racks which are compliant to ANSI/EIA RS-310D, DIN41491 and IEC60297 standards. Their flexible structure allows installation at any location while their different heights offer a solution for a wide variation of applications. The construction is made using a cold rolled steel frame with a thickness of 1.5 mm and 1,0 mm plates, finished in a black (RAL9004) powder coating. The front is finished with a reversible tempered glass front door. Other features for this product are removable sides, in depth adjustable 19” profiles and a ventilation grid on top.
EPR406
EPR409
19” wall rack 6 units 450 mm depth
EPR412
19” wall rack 9 units 450 mm depth
19” wall rack 12 units 450 mm depth
Specifications
16
ARTICLE
DIMENSIONS (H x W x D)
USABLE DEPTH
MAX LOAD
EPR406
345 x 540 x 450 mm
370 mm
50 kg
EPR409
480 x 540 x 450 mm
370 mm
50 kg
EPR412
615 x 540 x 450 mm
370 mm
50 kg
•
Reversible door position
•
In-depth adjustable 19” profiles
•
Removable side panels
•
Cable entry on top & bottom
•
Ventilation grid on top
•
Punched square holes for use with snap-in cage nuts
•
Static load up to 50 Kg
•
ANSI/EIA RS- 310D, DIN41491 and IEC60297 standard
PR SERIES The PR series are professional standard 19” racks compliant to ANSI/EIA RS-310D, DIN41491 and IEC60297 standards, available in a wide range of heights from 6 to 27 units. They are constructed of 1,5 mm cold rolled steel finished with a black (RAL9004) powder coating with a fine structure. They feature an open front side for direct access and removable rear panel for easy installation and cabling.
PR206
19” rack 6 units 500 mm depth
PR209
PR212
19” rack 9 units 500 mm depth
19” rack 12 units 500 mm depth
PR218
19” rack 18 units 500 mm depth
PR227
19” rack 27 units 500mm depth
Specifications •
Removable rear panel for easy installation & cabling
•
Integrated ventilation grid and cable entry on rear panel
•
Punched square holes for use with snap-in cage nuts
26 kg
•
Rubber feet on bottom
34 kg
•
ANSI/EIA RS- 310D, DIN41491 and IEC60297 standard
ARTICLE
DIMENSIONS (H x W x D)
USABLE DEPTH
WEIGHT
PR206
338 x 540 x 500 mm
475 mm
14,9 kg
PR209
471 x 540 x 500 mm
475 mm
17,7 kg
PR212
605 x 540 x 500 mm
475 mm
20,5 kg
PR218
872 x 540 x 500 mm
475 mm
PR227
1272 x 540 x 500 mm
475 mm
PR210WS
WHEEL SET FOR PR2XX RACKS A set of 4 solid wheels for PR2xx racks. Two wheels have a brake. M8 / ø 50 x 20 mm
17
19” RACKS & ACCESSORIES
SPR, WPR AND HPR ACCESSORIES SPR10CS
SPR10CS The SPR10CS connects 2 racks together without nuts. Every rack is fitted with holes on top allowing for a quick and easy installation of the SPR10CS. This results in a good strong connection yet maintaining nice clean look. For use with SPR & WPR racks.
SPR10DC
DUST COVER BRUSH The SPR10DC is a dust cover brush which is meant to be used for covering the cable inlets which are provided in the SPR and WPR racks. When the racks are installed in industrial environments, through time dust and dirt will enter the racks through all small gaps and openings. In the longer term, this can have a negative influence on the performance of the equipment which is installed in the racks.
SPRXXLR
SPR60LR - SPR80LR A 19” L-rail made of 1,2 mm thick cold rolled steel with a black structural powder coating. The rail provides extra support when mounting heavy equipment and the mounting distance can be adjusted to your needs. For use with SPR series only. Comes in pairs. Specifications
WPRXXLR
ARTICLE
DIMENSIONS (H x W x D)
WEIGHT
SPR60LR
35 x 67 x 350 mm
0,55 kg
SPR80LR
35 x 67 x 550 mm
0,63 kg
WPR45LR - WPR60LR A 19” L-rail set made of 1,2 mm thick cold rolled steel with a black structural powder coating. The rail provides extra support when mounting heavy equipment and the mounting distance can be adjusted to your needs. For use with WPR and HPR series only. Specifications
SPRXXPT
ARTICLE
DIMENSIONS (H x W x D)
WEIGHT
WPR45LR
38 x 45 x 227 mm
0,4 kg
WPR60LR
35 x 68 x 327 mm
0,6 kg
SPR60PT - SPR80PT A 19” rack plinth made of steel with a plate thickness of 1,2 mm and provided with a black (RAL9004) structured powder coating. The plinth raises the rack off the floor allowing easy cable access. Specifications
18
ARTICLE
DIMENSIONS (H x W x D)
WEIGHT
SPR60PT
80 x 600 x 600 mm
6 kg
SPR80PT
80 x 600 x 800 mm
7,6 kg
SPRXXFS WPRXXFS
SPR60FS - SPR80FS / WPR45FS - WPR60FS A 19” fixed shelf made of steel with a plate thickness of 1,2 mm and provided with a black (RAL9004) structured powder coating. The shelf can be used to store equipment which doesn’t contain a standard 19” mounting fixture. For use with SPR or WPR racks only. Specifications
SPRXXRF
ARTICLE
DIMENSIONS (H x W x D)
WEIGHT
SPR60FS
15 x 470 x 350 mm
1,8 kg
SPR80FS
15 x 470 x 550 mm
2,8 kg
WPR45FS
15 x 490 x 350 mm
1,8 kg
WPR60FS
15 x 490 x 550 mm
2,8 kg
SPR60RF - SPR80RF A 19” cooling roof fan unit made of steel with a plate thickness of 1,2 mm and provided with a black (RAL9004) structured powder coating which is used to improve the air circulation and help remove hot air from the rack. The fans run at medium speed and need to be fed with 240V AC at 50/60Hz. For use with SPR racks only. Specifications
SPRXXSS
ARTICLE
DIMENSIONS (H x W x D)
WEIGHT
NOISE
POWER
SPR60RF
50 x 450 x 363 mm
2,3 kg
< 51 dB
2 x 20 W
SPR80RF
50 x 450 x 363 mm
3,5 kg
< 57 dB
4 x 20 W
SPR60SS - SPR80SS A 19” sliding shelf made of steel with a plate thickness of 1,2 mm and provided with a black (RAL9004) structured powder coating. The shelf can be used to store equipment which doesn’t contain a standard 19” mounting fixture or equipment that needs to be accessed frequently. The smooth sliding shelf provides easy access. For use with SPR racks only. Specifications ARTICLE
WPR10RF
DIMENSIONS (H x W x D)
USABLE DEPTH
WEIGHT
SPR60SS
10 x 482 x 380 mm
350 mm
3,2 kg
SPR80SS
10 x 482 x 550 mm
530 mm
4,3 kg
WPR10RF The WPR10RF is a 120 mm sleeve bearing axial ventilation fan for installation to the top compartment of any matching rack. When installed to the provided mounting holes, the rising warm air will be removed from the top section, improving the air flow throughout the cabinet. Specifications
BCO242
SPEED
NOISE
LIFE TERM
2600 RPM
45 dB
30.000 HRS
VERTICAL CABLE ORGANIZER The BCO242 is a cable management system for vertical installation in 42 unit SPR series racks. The high capacity design with large number of openings allows simple and clean cable bundling and routing. Installation can be done on both front and rear side while access can be achieved in both directions. It is constructed using both steel and plastic components. Dimensions : 1869 x 88,6 x 110 mm Units : 42 units For use with SPR642 and SPR842 racks.
19
19” RACKS & ACCESSORIES
BLIND PLATES The range of blind panels includes several models whereof each model is available in different versions in terms of dimensions and/or assembly possibilities. All blind plates are made of 1,5 mm thick cold rolled steel with a U-shaped structure which provides improved strength. They are all finished with a black (RAL9004) powder coating with fine structured finish which ensures an improved scratch resistance.
BLIND PLATES
19” blind cover made of steel with a black structural powder coating. With a thickness of 1,5 mm. Available in 0.33, 0.5, 1, 2, 3, 4, 5 and 6 units.
19” blind cover made of steel with a black structural powder coating. With a thickness of 1,5 mm and ventilation openings. Available in 1, 2, 3, 4, 5 and 6 units.
BSF003
BSV01
19” BLIND PLATE STEEL - 0.33 UNIT Dimensions (H x W x D) : 14,1 x 483 x 10 mm Weight : 0,16 kg
19” VENTILATED BLIND PLATE STEEL - 1 UNIT Dimensions (H x W x D) : 43,7 x 483 x 10 mm Weight : 0,22 kg
BSF005
BSV02
19” BLIND PLATE STEEL - 0.5 UNIT Dimensions (H x W x D) : 21,5 x 483 x 10 mm Weight : 0,20 kg
19” VENTILATED BLIND PLATE STEEL - 2 UNITS Dimensions (H x W x D) : 88,1 x 483 x 10 mm Weight : 0,4 kg
BSF01
BSV03
19” BLIND PLATE STEEL - 1 UNIT Dimensions (H x W x D) : 43,7 x 483 x 10 mm Weight : 0,28 kg
19” VENTILATED BLIND PLATE STEEL - 3 UNITS Dimensions (H x W x D) : 132,5 x 483 x 10 mm Weight : 0,56 kg
BSF02
BSV04
19” BLIND PLATE STEEL - 2 UNITS Dimensions (H x W x D) : 88 ,1 x 483 x 10 mm Weight : 0,46 kg
19” VENTILATED BLIND PLATE STEEL - 4 UNITS Dimensions (H x W x D) : 177 x 483 x 10 mm Weight : 0,7 kg
BSF03
BSV05
19” BLIND PLATE STEEL - 3 UNITS Dimensions (H x W x D) : 132,5 x 483 x 10 mm Weight : 0,70 kg
19” VENTILATED BLIND PLATE STEEL - 5 UNITS Dimensions (H x W x D) : 221,5 x 483 x 10 mm Weight : 0,88 kg
BSF04
BSV06
19” BLIND PLATE STEEL - 4 UNITS Dimensions (H x W x D) : 177 x 483 x 10 mm Weight : 0,82 kg
19” VENTILATED BLIND PLATE STEEL - 6 UNITS Dimensions (H x W x D) : 265,9 x 483 x 10 mm Weight : 0,96 kg
BSF05 19” BLIND PLATE STEEL - 5 UNITS Dimensions (H x W x D) : 221,5 x 483 x 10 mm Weight : 1,10 kg
BSF06 19” BLIND PLATE STEEL - 6 UNITS Dimensions (H x W x D) : 265,9 x 483 x 10 mm Weight : 1,30 kg
20
VENTILATED BLIND PLATES
BLIND PLATES WITH BRUSH
19” blind panels with brush strip which can be installed in any 19” enclosure providing an inlet through which any cable can pass without having any openings or holes in the enclosure. The brush will blend nicely around the passing cable, preventing any unwanted dust or dirt from entering the cabinet.
BLIND PLATE WITH SERVICE DOOR
The BSD02 is a hinged blind panel with slam latch which can be installed to any 19” enclosure. This creates a fully closed rack cabinet while offering easy and instant access inside the cabinet for service and maintenance.
BSB01 + BSB02
BSD02
19” BLIND PLATE WITH BRUSH - 1 UNIT Dimensions (H x W x D) : 43,7 x 483 x 10 mm Weight : 0,196 kg
19” PANEL 19” blind cover with service door, 2 unit Dimensions (H x W x D) : 88,1 x 483 x 21 mm
19” BLIND PLATE WITH BRUSH - 2 UNITS Dimensions (H x W x D) : 88,1 x 483 x 10 mm Weight : 0,338 kg
CABLE ORGANIZER BCO101 HORIZONTAL CABLE ORGANIZER The BCO101 horizontal cable management system can be installed to any 19” rack enclosure occupying one single rackspace. It organizes small to large cable bundles on any device or patch panel, keeping a clean and beautifull overview on the wiring. Access can be achieved in both directions and it is constructed using ABS materials. Dimensions (H x W x D) : 482 x 44 x 65,5 mm Weight : 0,23 kg
SCREWS & CAGE NUTS KM500 + KM600 + KM600A
KS500 + KS600
CAGE NUTS KM500 : M5 Cage nut / 0.5 ~ 1.6 mm plate thickness / zinc plated KM600 : M6 Cage nut / 0.5 ~ 1.6 mm plate thickness / zinc plated KM600A : M6 Cage nut / 1.6 ~ 3.5 mm plate thickness / zinc plated
BOLTS KS500 : M5 x 16 mm / DIN7985 / Black phosphated incl nylon washer KS600 : M6 x 16mm / DIN7985 / Black phosphated incl nylon washer Sold in packs of 100 pcs
Sold in packs of 100 pcs
21
19” RACKS & ACCESSORIES
RACK PLATES
22
BP106
BP106T
19” PANEL 19” blind plate, 1 unit, 6 D-size holes Dimensions (H x W x D) : 43,7 x 483 x 10 mm Weight : 0,26 kg
19” PANEL 19” blind plate, 1 unit, 6 D-size holes and tension relief Dimensions (H x W x D) : 43,7 x 483 x 83 mm Weight : 0,66 kg
BP108
BP108T
19” PANEL 19” blind plate, 1 unit, 8 D-size holes Dimensions (H x W x D) : 43,7 x 483 x 10 mm Weight : 0,28 kg
19” PANEL 19” blind plate, 1 unit, 8 D-size holes and tension relief Dimensions (H x W x D) : 43,7 x 483 x 83 mm Weight : 0,65 kg
BP112
BP112T
19” PANEL 19” blind plate, 1 unit, 12 D-size holes Dimensions (H x W x D) : 43,7 x 483 x 10 mm Weight : 0,30 kg
19” PANEL 19” blind plate, 1 unit, 12 D-size holes and tension relief Dimensions (H x W x D) : 43,7 x 483 x 83 mm Weight : 0,63 kg
BSG01
BSG02
19” PANEL 19” grill security panel, 1 unit Dimensions (H x W x D) : 43,7 x 483 x 25 mm Weight : 0,28 kg
19” PANEL 19” grill security panel, 2 units Dimensions (H x W x D) : 88,1 x 483 x 25 mm Weight : 0,39 kg
POWER DISTRIBUTION PSR108E + PSR108ES + PSR118ES
19” POWER DISTRIBUTION UNIT C13 SOCKET Dimensions (H x W x D) : 45,2 x 480 x 44,9 mm Weight : 0,75 kg 16A ~ 250 V AC / 4000 W Max PSR108E/B : 8 x IEC C13 socket
PSR108ES/B : with front switch & switch cover
PSR118ES/B : with rear switch
PSR108F + PSR108FS + PSR118FS
19” POWER DISTRIBUTION UNIT FRENCH SOCKET Dimensions (H x W x D) : 45,2 x 480 x 44,9 mm Weight : 0,82 kg 16A ~ 250 V AC / 4000 W Max PSR108F/B : 8 x French socket
PSR108FS/B : with front switch & switch cover
PSR118FS/B : with rear switch
PSR108G + PSR108GS + PSR118GS
19” POWER DISTRIBUTION UNIT GERMAN SOCKET Dimensions (H x W x D) : 45,2 x 480 x 44,9 mm Weight : 0,82 kg 16A ~ 250 V AC / 4000 W Max PSR108G/B : 8 x German socket
PSR108GS/B : with front switch & switch cover
PSR118GS/B : with rear switch
PSR107UKS
19” POWER DISTRIBUTION UNIT UK SOCKET Dimensions (H x W x D) : 45,2 x 480 x 44,9 mm Weight : 0,82 kg 13A ~ 250 V AC / 3250 W Max PSR107UKS/B : with front switch & switch cover
23
19” RACKS & ACCESSORIES Effective protection and a clear rack overview is offered using this range of 19” rack mount power distributor units compliant to the ANSI/ EIA RS-310D, DIN41491 and IEC60297 standards. A LED rack light illuminates the equipment over the entire width while portable devices can be charged using the front USB jacks. Superior protection is offered by circuit breakers, while surge protectors and voltage and current indication displays can also be found in this range. The construction is made using black (RAL9004) structured powder coated aluminum fitted with steel 19” mounting ears.
PSR418F + PSR418G
19” POWER DISTRIBUTION LIGHT / USB / FUSE The PSR418 series includes a switchable LED rack light, two front USB jacks and a 16 Amps circuit breaker on the front panel of the unit. Power distribution for up to eight devices is made possible using the rear output sockets. • • • • •
Switchable front LED light Two front USB jacks 16 Amps circuit breaker 19” Rack mountable Aluminum enclosure
Dimensions (H x W x D) : 483 x 45,2 x 157,7 mm 16A ~ 250 V AC / 4000 W Max PSR418F: 8 x French (Type E) socket PSR418G: 8 x German (Type F) socket
PSR518F + PSR518G
19” POWER DISTRIBUTION UNIT LUGHT / USB / FUSE / SURGE / DISPLAY The PSR518 series includes a switchable LED rack light, two front USB jacks and a 16 Amps circuit breaker on the front panel of the unit. Power surge & spike protection is offered by internal protector network, while a voltage and current indicator allow continuous voltage and power consumption monitoring. Power distribution for up to eight devices is made possible using the rear output sockets. • • • • • • •
Switchable front LED light Two front USB jacks 16 Amps circuit breaker Voltage & current indicator display Power surge & spike protection 19” Rack mountable Aluminum enclosure
Dimensions (H x W x D) : 483 x 45,2 x 157,7 mm 16A ~ 250 V AC / 4000 W Max PSR518F: 8 x French (Type E) socket PSR518G: 8 x German (Type F) socket
24
RACK SHELVES The IS series are 19” fixed shelves which are constructed of cold rolled steel with a plate thickness of 1,5 mm. They are available in three models for 1 unit, 2 units and 3 units rack mounting with each of them having a usable depth of 325 mm. The special cutout structure allows easy and effective rack assembly for any device which is not standard fitted with 19” mounting ears, including wire fixation. They are all finished with a black (RAL9004) powder coating with fine structured finish which ensures an improved scratch resistance.
IS110
19” STANDARD SHELF - 1 UNIT For non rack mountable appliances Dimensions (H x W x D) : 43,7 x 483 x 331,5 mm Usable depth : 325 mm Weight : 1,99 kg
IS210
19” STANDARD SHELF - 2 UNITS For non rack mountable appliances Dimensions (H x W x D) : 88,1 x 483 x 331,5 mm Usable depth : 325 mm Weight : 2,36 kg
IS310
19” STANDARD SHELF - 3 UNITS For non rack mountable appliances Dimensions (H x W x D) : 132,5 x 483 x 331,5 mm Usable depth : 325 mm Weight : 2,73 kg
25
19” RACKS & ACCESSORIES
DRAWERS The range of 19” rack drawers consists of three sizes with differences in unit height. These rack drawers can be used for storage of any belongings related to the rack mounted equipment, such as cables, microphones, wireless transmitters, headsets, remote controls, instruction manuals, etc. They are constructed of 1,2 mm thick cold rolled steel which is finished in a black (RAL9004) powder coating with fine structured finish which ensures an improved scratch resistance. All rack drawers come with 2 keys.
RD110L
DRAWER - 1 UNIT 19” drawer with lock, 1 unit Dimensions (H x W x D) : 43,7 x 483 x 375 mm Inside dimensions (H x W x D) : 38,5 x 399 x 350 mm Weight : 4,50 kg
with wing-knob lock
RD210L
DRAWER - 2 UNITS 19” drawer with lock, 2 units Dimensions (H x W x D) : 88 x 483 x 375 mm Inside dimensions (H x W x D) : 83,5 x 399 x 350 mm Weight : 6,14 kg
RD210 RD310L
DRAWER - 3 UNITS 19” drawer with lock, 3 units Dimensions (H x W x D) : 132,5 x 483 x 375 mm Inside dimensions (H x W x D) : 128 x 399 x 350 mm Weight : 7,31 kg
RD410L
DRAWER - 4 UNITS 19” drawer with lock, 4 units Dimensions (H x W x D) : 177 x 483 x 375 mm Inside dimensions (H x W x D) : 172,5 x 399 x 350 mm Weight : 8,48 kg
RD310
RD410 26
drawer without lock
drawer without lock
drawer without lock
MODULAR SOLUTIONS
MODULAR SOLUTIONS
CASY SERIES The CASY system joins the Caymon product range as a flexible solution for a wide variety of applications in terms of system integration and connectivity. This system consists of an entire product range containing different base frames which allow an extensive range of optional modules to be installed. This results in a plug and play, solderless system offering flexible solutions in terms of connectivity, power distribution, internal rack supplies and many more.
19” RACK MOUNT CHASSIS Front & back side module mounting Structured black powder coating (RAL9004) Aluminum extruded frame with steel side ears
CASY001 CHASSIS 12 SPACE 2HE 19” mounting 120 mm depth
CASY002 CHASSIS 12 SPACE 2HE 19” mounting 270 mm depth
SURFACE MOUNT CHASSIS
CASY003 CHASSIS 6 SPACE Table mount 120 mm depth
28
The CASY system is built-up around a main-chassis, available in a range of sizes, mountings and depths. The range of modules goes from standard closed and vented blind panels to connection modules featuring audio connectors, video and data connectivities, power switches & sockets, volume controllers, strain reliefs and many more. The number of configurations is enormous and the number of applications where this system can offer tailored solutions is infinite.
STRAIN RELIEF Structured black powder coating (RAL9004) 1.5 mm cold rolled steel
CASY021 STRAIN RELIEF 12 SPACE for use with CASY001/B and CASY002/B
DESKTOP CHASSIS • • • •
Front module mounting Large access holes on rear Structured black powder coating (RAL9004) Aluminum extruded frame with plastic sides
50 mm usable module depth
CASY014T ON-TABLE CHASSIS 4 SPACE Dimensions (H x W x D) : 112,7 x 172 x 101,1 mm
CASY018T ON-TABLE CHASSIS 8 SPACE Dimensions (H x W x D) : 112,7 x 316 x 101,1 mm
ON-WALL CHASSIS • • • •
Front module mounting Large access holes on rear Structured black powder coating (RAL9004) Aluminum extruded frame with plastic sides
50 mm usable module depth cable duct and cable gland entry provided
CASY014W ON-WALL CHASSIS 4 SPACE Dimensions (H x W x D) : 88,1 x 172 x 55 mm
CASY018W ON-WALL CHASSIS 8 SPACE Dimensions (H x W x D) : 88,1 x 316 x 55 mm
FLIP-OUT DESKTOP CHASSIS • • • • • •
45° Rotatable lid Quick-fix mounting system Cable entry with brush Large access holes on rear Structured black powder coating (RAL9004) Cold rolled steel construction
68.5 mm usable module depth 90 mm installation depth 8 ~ 45 mm mountable plate thickness
CASY024 IN-TABLE MOUNT BOX 4 SPACE Dimensions (H x W x D) : 91,5 x 178 x 198 mm
CASY028 IN-TABLE MOUNT BOX 8 SPACE Dimensions (H x W x D) : 91,5 x 322 x 198 mm
29
MODULAR SOLUTIONS
1 SPACE ELEMENTS Structured black powder coating (RAL9004) 1.5 mm cold rolled steel 35.5 mm (W) x 82.1 mm (H)
CASY101
Closed blind plate
CASY102
Vented blind plate
CASY103
Cover plate with D-size hole
CASY104
Angled cover plate with D-size hole
CASY105
CASY125
CASY148
CASY126
CASY151
CASY131
CASY152
Cover plate with 2 x Neutrik XLR female to 3-pin terminal block
Cover plate with 2 x Neutrik XLR male to 3-pin terminal block
Cover plate with 2 x RCA gender
CASY132
Cover plate with 2 D-size holes
Cover plate with 2 x RCA to 3-pin terminal block
CASY106
CASY135
CASY107
CASY136
Cover plate with 1 Keystone hole
Cover plate with 1 Keystone holes
CASY121
Cover plate with Neutrik XLR female to 3-pin terminal block
CASY122
Cover plate with Neutrik XLR male to 3-pin terminal block
CASY123
Angled cover plate with Neutrik XLR female to 3-pin terminal block
CASY124
Angled cover plate with Neutrik XLR male to 3-pin terminal block
30
solderless
Cover plate with 3.5 mm Jack gender
Cover plate with 3.5 mm Jack to 3-pin terminal block
Cover plate with 2 x 2-pin terminal block to 2-pin terminal block speaker level
Cover plate with VGA and 3,5 mm Jack gender
Cover plate with HDMI and 3,5 mm Jack gender
CASY161
Cover plate with USB 2.0 A gender
CASY162
Cover plate with USB 2.0 A to 4-pin terminal block
CASY167
Cover plate with Neutrik Ethercon to RJ45
CASY138
CASY168
CASY141
CASY181
CASY142
CASY182
CASY143
CASY191
Cover plate with 2 x 3-pin terminal block to 3-pin terminal block line level
Cover plate with Neutrik Speakon to 4-pin terminal block
Cover plate with 2 x Neutrik Speakon to 4-pin terminal block
Angled cover plate with Neutrik Speakon to 4-pin terminal block
Cover plate with 2 x Neutrik Ethercon to RJ45
Cover plate with Euro power male to GST18 female
Cover plate with Euro power female to GST18 male
Cover plate with stereo galvanic isolator (shielded)
2 SPACE ELEMENTS Structured black powder coating (RAL9004) 1.5 mm cold rolled steel 71.5 mm (W) x 82.1 mm (H)
CASY201
Closed blind plate
CASY202
Vented blind plate
CASY203
Cover plate with 4 D-Size holes
solderless
CASY282
CASY295-30
CASY285F
CASY295-60
CASY285G
CASY295-100
Cover plate with 2 x Euro power female to GST18 male
Cover plate with French schuko female to GST18 male (IP44 protection)
Cover plate with German schuko female to GST18 male (IP44 protection)
Cover plate with 100V / 30W volume controller
Cover plate with 100V / 60W volume controller
Cover plate with 100V / 100W volume controller
CASY285UK
Cover plate with UK socket female to GST18 male (IP44 protection)
31
MODULAR SOLUTIONS
3 SPACE ELEMENTS
4 SPACE ELEMENTS
Structured black powder coating (RAL9004) 1.5 mm cold rolled steel 107.5 mm (W) x 82.1 mm (H)
Structured black powder coating (RAL9004) 1.5 mm cold rolled steel 143.5 mm (W) x 82.1 mm (H)
CASY301
CASY401
CASY302
CASY402
Closed blind plate
Vented blind plate
32
Closed blind plate
Vented blind plate
STANDS
STANDS
Caymon’s generation microphone stands includes lightweight, professionally styled stands that offer the fit and feeling of tripods costing considerably more. They feature the most versatile microphone needs. For instance the three-piece clutch with protective insert & metal clutch barrel for secure and scratch resistant positioning, and the easy-locking legs that tighten with a single motion of the metal leg attachment “cup” for fast setup and tear down.
CST201
FLOOR STAND Straight microphone stand. Black cast iron round base. Including cable fixation clamp and 5/8” to 3/8” thread reduction. Specifications HEIGHT ADJUSTABLE
BASE DIAMETER
SCREW BASE
WEIGHT
83 cm to 154 cm
25 cm
5/8” & 3/8”
3,2 kg
CST301 FLOOR STAND Straight microphone stand. Black cast iron base with foldable legs Including cable fixation clamp and 5/8” to 3/8” thread reduction.
OPTION Soft Bag TBAG01 more info p. 59
Specifications
34
HEIGHT ADJUSTABLE
BASE DIAMETER
SCREW BASE
WEIGHT
90 cm to 160 cm
72 cm
5/8” & 3/8”
1,9 kg
CST210 FLOOR STAND Microphone boom stand. Same as CST201B but with standard boom arm of 80 cm. Black cast iron round base. Including cable fixation clamp and 5/8” to 3/8” thread reduction. Specifications HEIGHT ADJUSTABLE
BASE DIAMETER
SCREW BASE
WEIGHT
83 cm to 154 cm
25 cm
5/8” & 3/8”
3,78 kg
CST310 FLOOR STAND Microphone boom stand. Same as CST301B but with standard boom arm of 80 cm. Black cast iron base with foldable legs. Including cable fixation clamp and 5/8” to 3/8” thread reduction. Specifications HEIGHT ADJUSTABLE
BASE DIAMETER
SCREW BASE
WEIGHT
90 cm to 160 cm
72 cm
5/8” & 3/8”
2,34 kg
OPTION Soft Bag TBAG01 more info p. 59
35
STANDS
Caymon’s next generation of professional drum and table microphone stands include lightweight and durable designs that have easy-locking legs or cast iron solid round bases to ensure a fast and stable setup. The drum microphone stand is equipped with an extendible boom arm for easy bass drum miking.
CST259
CST101
FLOOR STAND Microphone drum stand with extendable boom arm, adjustable from 50 to 90 cm. Black cast iron base with foldable legs. Including cable fixation clamp and 5/8” to 3/8” thread reduction. Specifications HEIGHT ADJUSTABLE
BASE DIAMETER
SCREW BASE
WEIGHT
48 cm to 73 cm
56 cm
5/8” & 3/8”
1,74 kg
CST354 SIDE ARM Straight side arm to attach an extra microphone. Screw base 3/8”. Distance between stand and microphone : 25 cm Weight : 0,28 kg
36
TABLE STAND Straight microphone table stand. Black lacquered cast iron round base. Including cable fixation clamp and 5/8” to 3/8” thread reduction. Specifications HEIGHT (FIXED)
BASE DIAMETER
SCREW BASE
WEIGHT
17,3 cm
13 cm
5/8” & 3/8”
0,8 kg
CST312
CST010 BOOM ARM Boom arm for CST201/B or CST301/B Length : 84 cm Screw base : 3/8” Weight : 0,58 kg Color : Black
SIDE ARM Bended side arm to attach an extra microphone. With small boom arm of 51 cm Screw base 3/8” Distance from stand : 8 cm Height : 36,5 cm Weight : 0,80 kg Including cable fixation clamp and 5/8” to 3/8” thread reduction.
Caymon provides a complete range of professional microphone accessories ranging from windscreens, shock mounts, microphone desk arms, different models of clamps and reductions to shockproof mountings for XLR gooseneck microphones and much more.
CMC020
CMC024
CMC033
MICROPHONE CLAMP Universal microphone clamp Screw thread : 5/8” and 3/8” Elastic rubber material. For small condenser microphones Diameter : +/- 20 mm Weight : 0,04 kg
MICROPHONE CLAMP Large microphone clamp Screw thread : 5/8” and 3/8” Elastic rubber material. For handheld wireless microphones Diameter : +/- 24 mm Weight : 0,06 kg
MICROPHONE CLAMP Large microphone clamp Screw thread : 5/8” and 3/8” Elastic rubber material. For handheld wireless microphones Diameter : +/- 33 mm Weight : 0,06 kg
37
STANDS
38
CMA350
CRD130
SHOCK MOUNT Shock mount for XLR based gooseneck microphones. Height : 60 mm Inside diameter : 22 mm Outside diameter : 75 mm Cut-out diameter : 55 mm Built-in depth : 60 mm Weight : 0,06 kg
REDUCTION Thread adaptor 5/8” 27 gauge male thread 3/8” female thread
CRD140
CRD120
MOUNTING FLANGE with 5/8” thread Base diameter : 60 mm Weight : 0,08 kg
REDUCTION Thread adaptor 5/8” 27 gauge female thread 3/8” male thread
CST420/B
CST250
MONITOR STAND Triangular base Height adjustable : 92 to 134 cm Base dimensions (W x H) : 45 x 39 cm Weight : 4,32 kg Including spikes
HEAD BASE Head base for speaker stand. Tube inside diameter : 35 mm Top screw : M10 Height : 11 cm Weight : 0,50 kg
Discover Caymonâ&#x20AC;&#x2122;s range of professional speaker stands. All of the following models are made of aluminium or steel and guarantee a safe and easy setup of your speaker systems. They all have a lightweight design which permits easier transportation. Their solid construction enables them to last even longer and deliver you many years of pleasure.
CST450
CST436
SPEAKER STAND Black aluminium-steel speaker stand with air suspension. Suitable for all speakers with 35 mm stand adaptor.
SPEAKER STAND Standard aluminium speaker stand with blocking mechanism. Suitable for all speakers with 35 mm stand adaptor.
Tube diameter : 35 mm Height adjustable: 110 to 180 cm Max base diameter : 152 cm Weight : 3,38 kg Max Load : 35 kg
Tube diameter : 35 mm Height adjustable : 114 cm to 200 cm Max base diameter : 134 cm Weight : 3,14 kg Max Load : 35 kg
OPTION Soft Bag TBAG05 Soft Bag TBAG25 more info p. 59
OPTION Soft Bag TBAG05 Soft Bag TBAG25 more info p. 59
CST465
CST410
WIND UP STAND Black high-quality aluminium-steel speaker stand for professional use. The height can be adjusted by means of an effective hand crank system. An extra security bolt anchors the complete system to ensure a secure installation. With leg-blocking system to ensure maximum stability.
SPEAKER POLE Black aluminium speaker distance pole for satelite systems. For use with 35 mm stand adapter top and bottom.
Tube diameter : 35 mm Height adjustable: 155 cm to 240 cm Max base diameter : 160 cm Weight : 9,4 kg Max load : 50 kg
Tube diameter : 35 mm top and bottom. Height adjustable: 81 cm to 134 cm Weight : 1,38 kg Max load : 35 kg OPTION Soft Bag TBAG01 more info p. 59
39
40
FLIGHTCASES
FLIGHTCASES
FC SERIES | 500MM DEPTH
FC SERIES
FC104
507
507
The FC series are professional double cover flight cases with a usable depth of 482 mm compliant to the ANSI/EIA RS-310D, DIN41491 and IEC60297 standards for 19” equipment installation. The construction is made out of high quality 9 mm plywood covered by a ProShield™ top layer, offering an optimal protection for your equipment. Both front and back lids are detachable, allowing instant access to both controls and connections of your equipment. Mounting of the equipment can be done using the perforated rack rail with punched square holes for use with snap-in cage nuts, while the dual structure allows installation of horizontal supports for heavy equipment. Superior durability and handling convenience is guaranteed through Penn-Elcom® hardware such as heavy-duty ball corners, rivet protected recessed flip handles and MOL™ type butterfly latches.
FLIGHTCASE 4 UNITS Specifications Top View Top View USABLE DEPTH OUTSIDE DIMENSIONS (H x W x D)
USABLE HEIGHT
4 units
482 mm
210 x 529 x 687 mm
90
90
507 507
90
90
90
90
210 507 230 210 507 230
529 529
WEIGHT 14,60 kg
Front View Front View
FC106
Side View Side View
FLIGHTCASE 6 UNITS Specifications
Top View Top View
USABLE HEIGHT
USABLE DEPTH OUTSIDE DIMENSIONS (H x W x D)
6 units
482 mm
299 x 529 x 687 mm
529 529
90
90
299 507 319 299 507 319
FC104 FC104 Weight: Weight:
507 507
Product description: Product description: PROFESSIONAL PROFESSIONAL FLIGHTCASE FLIGHTCASE - SEPARATE - SEPARATE FRONT FRONT AND REAR AND REAR COVER COVER - 4 UNITS - 4 UNITS dimensions:Unit height: Unit height: OuterOuter dimensions: (w x h x(w d) x h x d)
TBA TBA Front View Front View
FC108
WEIGHT 17,20 kg
529 x 529 230 x 230 687 x 687
4 HE 4 HE
Side View Side View
FLIGHTCASE 8 UNITS Specifications View TopUSABLE View DEPTH OUTSIDE DIMENSIONS (H x W x D) USABLE Top HEIGHT 8 units
482 mm
388 x 529 x 687 mm
529 529
90
90
FC106 FC106 388 408 388 408
Weight: Weight:
Front View Front View
42
WEIGHT 19,50 kg
507 507 90 90 Product description: Product description: PROFESSIONAL PROFESSIONAL FLIGHTCASE FLIGHTCASE - SEPARATE - SEPARATE FRONT FRONT AND REAR AND REAR COVER COVER - 6 UNITS - 6 UNITS OuterOuter dimensions: dimensions:Unit height: Unit height: (w x h x(w d) x h x d)
TBA TBA
529 x 529 319 x 319 687 x 687
Side View Side View
6 HE 6 HE
FC110
507
507
FC SERIES | 500MM DEPTH
FLIGHTCASE 10 UNITS Specifications
Top View Top View
USABLE HEIGHT
USABLE DEPTH OUTSIDE DIMENSIONS (H x W x D)
10 units
482 mm
477 x 529 x 687 mm
507
90
507 507
Front View Front View
FC116
90
90
497
477
497 477
90
507
529 529
WEIGHT 21,50 kg
Side View Side View
FLIGHTCASE 16 UNITS Specifications
Top View Top View
USABLE HEIGHT
USABLE DEPTH
16 units
482 mm
529 529
OUTSIDE DIMENSIONS (H x W x D)
FC110 FC110 FRONTFRONT AND REAR AND REAR COVER COVER - 10 UNITS - 10 UNITS
Weight: Weight:90
90
507 507 Unit height: 90 90 OuterOuter dimensions: dimensions: Unit height:
(w x h x(w d) x h x d)
529 x 529 497 x 497 687 x 687
10 HE10 HE
764
744
764 744
TBA TBA
OPTION All FC flightcases are compatible with FCB104 Caster board more info p. 50
WEIGHT
Product Product description: description:
744 x 529 x 687 mmPROFESSIONAL 32,62FLIGHTCASE kg PROFESSIONAL FLIGHTCASE - SEPARATE - SEPARATE
Front View Front View
Side View Side View
Product description: Product description:
PROFESSIONAL FLIGHTCASE FLIGHTCASE - SEPARATE - SEPARATE FC116 FC116 PROFESSIONAL ProShield FRONT FRONT AND REAR AND REAR COVER COVER - 16 UNITS - 16 toplayer UNITS TM
Weight: Weight:
dimensions:Unit height: Unit height: OuterOuter dimensions: (w x h x(w d) x h x d)
TBA TBA
529 x 529 764 x 764 687 x 687
16 HE16 HE
43
FLIGHTCASES
FCX SERIES | 360MM DEPTH
FCX SERIES
360 360
The FCX series are professional double cover flight cases with a usable depth of 335 mm compliant to the ANSI/EIA RS-310D, DIN41491 and IEC60297 standards for 19” equipment installation. The construction is made out of high quality 9 mm plywood covered by a ProShield™ top layer, offering an optimal protection for your equipment. Both front and back lids are detachable, allowing instant access to both controls and connections of your equipment. Mounting of the equipment can be done using the perforated rack rail with punched square holes for use with snap-in cage nuts. Superior durability and handling convenience is guaranteed through Penn-Elcom® hardware such as heavy-duty ball corners, rivet protected recessed flip handles and MOL™ type butterfly latches.
FCX103
FLIGHTCASE 3 UNITS Specifications Top View USABLE HEIGHT USABLE DEPTH Top View 3 units
OUTSIDE DIMENSIONS (H x W x D)
WEIGHT
166 x 529 x 540 mm
11 kg
335 mm
90 90
Front View Front View
FCX104
360 360
360 166 166 360186 186
529 529
90 90
Side View Side View
FLIGHTCASE 4 UNITS Specifications Top Top View View
USABLE HEIGHT
USABLE DEPTH
OUTSIDE DIMENSIONS (H x W x D)
WEIGHT
4 units
335 mm
210 x 529 x 540 mm
12,20 kg
529 529
90 90
360 210 210 360 230 230
FCX103 FCX103
Weight: Weight:
Front View Front View
FCX106
360 360
90 90
Product description: Product description: PROFESSIONAL FLIGHTCASE - SEPARATE PROFESSIONAL FLIGHTCASE - SEPARATE FRONT AND REAR COVER 3 UNITS FRONT AND REAR COVER - 3-UNITS Outer dimensions: Unit Unit height: Outer dimensions: height: (w x(wh xx hd)x d) Side Side View View
TBA TBA
529 x 186 x 540 529 x 186 x 540
3 HE 3 HE
FLIGHTCASE 6 UNITS Specifications Top Top View View USABLE DEPTH OUTSIDE DIMENSIONS (H x W x D)
WEIGHT
6 units
14,20 kg
USABLE HEIGHT
335 mm
299 x 529 x 540 mm
529 529
90 90
299 299 319 319
FCX104 FCX104
Weight: Weight:
360 360
Product description: Product description: PROFESSIONAL PROFESSIONAL FLIGHTCASE FLIGHTCASE - SEPARATE - SEPARATE FRONT FRONT AND AND REAR REAR COVER COVER - 4-UNITS 4 UNITS Outer dimensions: Outer dimensions: (w x(wh xx hd)x d)
TBA TBA Front View Front View
44
90 90
Unit height: Unit height:
529 529 x 230 x 230 x 540 x 540 Side Side View View
4 HE 4 HE
360 360
FCX SERIES | 360MM DEPTH
FCX108
FLIGHTCASE 8 UNITS Specifications Top Top View View USABLE HEIGHT USABLE DEPTH 8 units
OUTSIDE DIMENSIONS (H x W x D)
WEIGHT
388 x 529 x 540 mm
16 kg
335 mm
90 90
360 360
90 90
360 360
388 388 408 408
529 529
Front View Front View
FLIGHTCASE 10 UNITS Specifications Top Top View View USABLE HEIGHT
USABLE DEPTH
OUTSIDE DIMENSIONS (H x W x D)
WEIGHT
10 units
335 mm
477 x 529 x 540 mm
17,80 kg
529 529
FCX108 FCX108
90 90
Weight: Weight:
Product description: Product description: 360 360 90 90 PROFESSIONAL PROFESSIONAL FLIGHTCASE FLIGHTCASE - SEPARATE - SEPARATE FRONT FRONT AND AND REAR REAR COVER COVER - 8-UNITS 8 UNITS Outer dimensions: Outer dimensions: (w x(wh xx hd)x d)
TBA TBA
Unit height: Unit height:
529 529 x 408 x 408 x 540 x 540
8 HE 8 HE
477 477 497 497
FCX110
Side Side View View
Front View Front View
Side Side View View
FCX110 FCX110 Weight: Weight:
Product description: Product description: PROFESSIONAL PROFESSIONAL FLIGHTCASE FLIGHTCASE - SEPARATE - SEPARATE FRONT FRONT AND AND REAR REAR COVER COVER - 10 - 10 UNITS UNITS Outer dimensions: Outer dimensions: (w x(wh xx hd)x d)
TBA TBA
Unit height: Unit height:
529 529 x 497 x 497 x 540 x 540
10 10 HEHE
45
FLIGHTCASES
FCE SERIES | UNIVERSAL FLIGHTCASES
FCE SERIES The FCE series are professional flight cases with hinged top cover which can be used for storage and transportation of cables, accessories, DI’s, microphones or other required accessories on your mobile installations. The standardized outside dimensions guarantee an optimal utilization of truck or pallet loadspace. The inside usable area can be divided in individual compartments by optional divider plates while optional trays can be inserted for storing small accessories. The construction is made out of high quality 9 mm plywood covered by a ProShield™ top layer, offering an optimal protection for your equipment. Superior durability and handling convenience is guaranteed through Penn-Elcom® hardware such as heavy-duty ball corners, rivet protected recessed flip handles and MOL™ type butterfly latches.
FCE066H 600
580
EURO FLIGHTCASE Specifications INSIDE DIMENSIONS (H x W x D)
OUTSIDE DIMENSIONS (H x W x D)
WEIGHT
580 x 526 x 526 mm
620 x 600 x 600 mm
27,50 kg 580
526
600
580
580
526 580
580
FCD056 divider plate more info p. 47
FCT066 tray insert more info p. 47
526
OPTIONS FCB104 Caster board more info p. 50
EURO FLIGHTCASE
600
FCE126H
580
526
Specifications 48,50 kg
526
600
1180
600
WEIGHT
762 x 1200 x 600 mm
580
OUTSIDE DIMENSIONS (H x W x D)
580 x 1126 x 526 mm
580
INSIDE DIMENSIONS ( H x W x D)
1126
wheels included 1180 1180
580 580
OPTIONS FCD056 and FCD116 divider plates more info p. 47 1126 1126
46
526
526
FCT066 and FCT126 tray inserts more info p. 47
FCE ACCESSORIES
FCD056
FCD116
FLIGHT CASE DIVIDER PLATE for FCE066H and FCE126H Dimensions : 557 x 575 mm Construction : 9 mm black coated plywood
FLIGHT CASE DIVIDER PLATE for FCE126H Dimensions : 1157 x 575 mm Construction : 9 mm black coated plywood
FCT066
FCT126
FLIGHT CASE TRAY INSERT for FCE066H and FCE126H Interior dimensions : 520 x 520 x 105 mm Exterior dimensions : 550 x 550 x 120 mm Construction : 15 mm black coated plywood
FLIGHT CASE TRAY INSERT for FCE126H Interior dimensions : 1120 x 520 x 105 mm Exterior dimensions : 1150 x 550 x 120 mm Construction : 15 mm black coated plywood
47
FLIGHTCASES
FCP SERIES | FLATSCREEN FLIGHTCASES
FCP SERIES The FCP series are professional flight cases which can be used for storage and transportation of two flat screen displays. The inner supporting structure is finished with shock absorbing EVA foam for optimal equipment protection. A movable internal divider tray allows width adjustment to perfectly match the displays’ width offering a tight fitting. Both left & right sides are fitted with 80 mm grooved foam supports holding both displays in position. The construction is made out of high quality 9 mm plywood covered by a ProShield™ top layer, offering an optimal protection for your equipment. Superior durability and handling convenience is guaranteed through Penn-Elcom® hardware such as heavy-duty ball corners, rivet protected recessed flip handles and MOL™ type butterfly latches.
FCP510
ADJUSTABLE FLATSCREEN FLIGHTCASE • Stores two flatscreens up to 55” (1315 x 940 x 80 mm Max) • Divider tray for width adjustment • Includes 4” swivel bearing casters 1440
400
73 kg
560
WEIGHT
1142 x 1440 x 400 mm
980
OUTSIDE DIMENSIONS (H x W x D)
420
Specifications
1315
400
980
605
420
1440
360
80
560
80
915
605
1315
FCP610
1656
605 80
1136
360
80
80
360
605
605 80
1136
80
1136
80
48
1656
80
1656
360
560
560
1136
80
980
980
400
360
605
400 420
1780 420
1780
400
420
1656
400
560
75.5 kg
1780
560
WEIGHT
1142 x 1780 x 400 mm
1780
980
OUTSIDE DIMENSIONS (H x W x D)
980
Specifications
420
80
80
ADJUSTABLE FLATSCREEN FLIGHTCASE 915 • Stores two flatscreens up to 70” (1656 x 940 x 80 mm Max) 360 • Divider tray for width adjustment • Includes 4” swivel bearing casters
FCP400 The FCP400MK2 is a professional flight cases which can be used for storage and transportation of a flat screen displays. The inner supporting structure is finished with shock absorbing EVA foam for optimal equipment protection. A movable internal divider tray allows width adjustment to perfectly match the displays’ width offering a tight fitting. Both left & right sides are fitted with 130 mm adjustable grooved foam supports holding the display in position. The construction is made out of high quality 9 mm plywood, offering an optimal protection for your equipment. The FCP400MK2 comes including 4” swivel bearing casters.
FCP400MK2
ADJUSTABLE FLATSCREEN FLIGHTCASE Specifications OUTSIDE DIMENSIONS (H x W x D)
WEIGHT
1245 x 400 x 795 mm
36 kg
49
FLIGHTCASES
CAS110 + CAS110L
ACCESSORIES
SWIVEL BEARING CASTER 4â&#x20AC;? Wheel dimensions : 100 x 32 mm Load capacity : 113 kg Height : 127 mm CAS110L : with brake
FCB104
CASTER BOARD Caster board to move or transport flightcases with the greatest ease. 4 inch professional blue caster wheels including double brakes on 2 casters. Designed for the following Caymon Flightcases: FC04/FC06/FC08/FC10/FC16 FCC04/FCC06/FCC08/FCC10/FCC16/FCC24/FCE066H Specifications
FCB30
WHEELS
PLATE
DIMENSIONS (H x W x D)
WEIGHT
CAS110 + CAS110L
18 mm Plywood
168 x 530 x 570 mm
7,3 kg
CASTER BOARD Caster board to move or transport flightcases with great ease. Sold in pairs. Specifications
FCB50
WHEELS
PLATE
DIMENSIONS (H x W x D)
WEIGHT
CAS100 + CAS100L
18 mm Plywood
135 x 310 x 140 mm
4,7 kg
CASTER BOARD Caster board to move or transport flightcases with great ease. Sold in pairs. Specifications
50
WHEELS
PLATE
DIMENSIONS (H x W x D)
WEIGHT
CAS100 + CAS100L
18 mm Plywood
135 x 310 x 140 mm
5,4 kg
FCMK & FCMC SERIES | MICROPHONE FLIGHTCASES
FCMK SERIES The FCMK103 is a professional double cover flight case compliant to the ANSI/EIA RS-310D, DIN41491 and IEC60297 standards for 19” equipment installation which is especially designed for use in combination with wireless microphone systems. The inside usable depth of 315 mm allows installation for all type of wireless microphone receivers, while the both covers are storage compartments of the matching transmitters. The covers are provided with diced pick&pluck foam, allowing customization according to transmitter shape, guaranteeing a shock-proof transportation. The construction is made out of high quality 9 mm plywood covered by a ProShield™ top layer, offering Brand an : optimal protection for your equipment. Both front and back lids are detachable, allowing instant access Type : to both controls and connections of your equipment. Mounting of the equipment can be done using the Outer Dimensions : perforated rack rail with punched square holes for use with snap-in cage nuts, while the dual structure allows Weight : installation of horizontal supports for heavy equipment. (H x W x D)
Plate :
Superior durability and handling convenience is guaranteed through Penn-Elcom® hardware such as heavyInside Usable Height : duty ball corners, rivet protected recessed flip handles and MOL™ type butterfly latches. CAYMON CAYMON professional stands and racks professional stands and racks
FCMK103
Specifications WEIGHT
166 x 529 x 540 mm
10.14 kg
Top View 530
Front View
165mm x 530m 537mm 10,00 kg
9mm Multi-La Multiplex 3 units
100
165 165
337
165 165
100
FCMK03
* Professional flight case for wire microphone systems * Removable front and back lid * Integrated flip handles * Professional butterfly latches * Black scratch-resistant coating * Aluminium finishing corners
MICROPHONE FLIGHTCASE
OUTSIDE DIMENSIONS (H x W x D)
CAYMON
Side View
pick & pluck foam Inside lid
FCMC SERIES
Model Nr.
FCMK03 \\Dataserver2\product_data\CAYMON\CAYMON.jpg \\Dataserver2\product_data\CAYMON\CAYMON.jpg
The FCMC series is made for all sorts of professional microphone applications. They have been made of high quality 9mm Multiplex with black scratch-resistant coating, equipped with sturdy, integrated flip handles and professional butterfly latches. But it also thanks its strength and durability to the 3 mm thick aluminium finishing profiles and extra sturdy galvanized metal reinforcements on every corner.
FCMC12
MICROPHONE FLIGHTCASE Specifications OUTSIDE DIMENSIONS (H x W x D)
WEIGHT
269 x 500 x 300 mm
8 kg
51
FLIGHTCASES
FCC SERIES | REMOVABLE TOP
FCC SERIES
450
The FCC series are professional combo flightcases with removable top and front cover, compliant to the ANSI/EIA RS-310D, DIN41491 and IEC60297 standards for 19” equipment installation. The construction is made out of high quality 9 mm plywood covered by a ProShield™ top layer, offering an optimal protection for your equipment. The top section allows installation of 19” mixers or controllers with a maximum height up to 11 units, slanted over an 8 degree angle. The front section allows equipment installation depending of the top equipment’s installation depth. A hinged rear door with cable entry offers easy access to the equipment’s rear side. Mounting of the equipment can be done using the perforated rack rail with punched square holes for use with snap-in cage nuts. Superior durability and handling convenience is guaranteed through Penn-Elcom® hardware such as heavy-duty ball corners, rivet protected recessed flip handles and MOL™ type butterfly latches. 547
FCC104
627
COMBO FLIGHTCASE
USABLE DEPTH
OUTSIDE DIMENSIONS (H x W x D)
WEIGHT
11 x 7 units
525 mm
450 x 547 x 627 mm
17,5 kg
627
7 HE
673
547
11 HE
450
UNIT HEIGHT
7 HE
Specifications
547
COMBO FLIGHTCASE 12 HE
FCC110
11 HE
Specifications USABLE DEPTH
OUTSIDE DIMENSIONS (H x W x D)
WEIGHT
11 x 12 units
525 mm
673 x 547 x 627 mm
22 kg
673
11 HE
UNIT HEIGHT
627
12 HE
547
52
627
940 547
18 HE
COMBO FLIGHTCASE Specifications USABLE DEPTH
OUTSIDE DIMENSIONS (H x W x D)
WEIGHT
11 x 18 units
525 mm
940 x 547 x 627 mm
30 kg
940
11 HE
UNIT HEIGHT
627
18 HE
547
11 HE
FCC116
62
53
FLIGHTCASES
FCS SERIES | DJ FLIGHTCASES
FCS SERIES This series consists of professional half open 19â&#x20AC;? flightcases for mixers and double CD players with combined front and top lid and an integrated door at the back. The mounting of the mixer and double CD controller are angled for comfortable use. All of these models are made of high quality 9mm Multiplex with black scratch-resistant coating, equipped with sturdy, integrated flip handles and professional butterfly latches. But it also thanks its strength and durability to the aluminium finishing profiles and extra sturdy galvanized metal reinforcements on every corner.
FCS04
COMBO DJ FLIGHTCASE Specifications
FCS06
USABLE HEIGHT
USABLE DEPTH
OUTSIDE DIMENSIONS (H x W x D)
WEIGHT
4 units
530 mm
664 x 530 x 600 mm
19,6 kg
COMBO DJ FLIGHTCASE Specifications
54
USABLE HEIGHT
USABLE DEPTH
OUTSIDE DIMENSIONS (H x W x D)
WEIGHT
6 units
530 mm
753 x 530 x 600 mm
21 kg
ACCESSORIES
ACCESSORIES
MOVE SERIES
MOVE SERIES The Move series is the result of many years of experience in developing soft bag designs. The range consists of strong, durable, professional black carrying soft bags for musicians on the road. These bags are made of solid waterproof polyester and will last you a life time. Caymon is even so convinced of this range that they offer a 2 year limited warranty on all the MOVE products.
56
MBL120
MWP100
The Caymon Move MBL are belt pouches made to last. The main compartment is ideal for mobile phones or mp3-players; accessories can be stored in the multiple additional pockets. Inner dimensions : 6 x 12 cm
The MWP100 fits and protects 1 wireless microphone transmitter. The neoprene fabric ensures itâ&#x20AC;&#x2122;s ideal for active users.
MBL220
MWP200
Belt pouch large size. The Caymon Move MBL are belt pouches made to last. The main compartment is ideal for mobile phones or mp3-players; accessories can be stored in the multiple additional pockets. Inner dimensions : 7 x 13 cm
The MWP fits and protects 2 wireless microphone transmitters. The neoprene fabric ensures itâ&#x20AC;&#x2122;s ideal for active users.
MOVE SERIES
MBL100
Secure your communication devices and personal media players with the MWP100 belt. The durable buckle provides reliability and easy adaptability for users on the move. Belt length : 108 cm
MLP117
The Caymon Move MLP117 offers an ideal mix of convenience and protection. Over 19 pouches provide storing space for even the most demanding user, while the heavy duty zippers, padded interior and ballistic nylon exterior ensure a safe journey for all your belongings.
MDJ1000
Protect your CD Player with the Caymon Move MDJ1000. The main compartment, with its modular padding, will fit the pioneer CDJ1000, CDJ800, CDJ900, CDJ2000, DVJ1000 and many other models. Additional pockets offer space for cables and gear.
57
ACCESSORIES
58
MOVE SERIES
MCD064
The Caymon Move MCD064 is a high-quality case for carrying up to 64 CD’s. The Shock-resistant molded casing ensures your discs remain safe even under the most extreme condtions.
MCD128
The Caymon Move MCD128 is a high-quality case for carrying up to 128 CD’s. The Shock-resistant molded casing ensures your discs remain safe, even under the most extreme condtions. The double-stitched sleeves allow for both the cd and its artwork to be stored.
MPR115
The MPR115 soft inner neoprene padding and the high-density ballistic nylon outer shell provide excellent protection for your 15” laptop. Two large zipper pulls, coated in rubber for extra grip, offer easy access to your computer. Inner dimensions : 36 x 27 cm
MPR117
The MPR117 soft inner neoprene padding and the high-density ballistic nylon outer shell provide excellent protection for your 17” laptop. Two large zipper pulls, coated in rubber for extra grip, offer easy access to your computer. Inner dimensions : 41 x 31 cm
STAND BAGS
Strong, professional black carrying soft bags for speaker, microphone or music stands. Available in different sizes. These bags are made of solid waterproof polyester and will last forever. Each bag has an adjustable shoulder strap for practical transportation.
TBAG01
CARRYING SOFT BAG Carrying bag for all CST microphone stands with folding legs or CST410 speaker pole. Length: 102 cm, Ø 10 cm
TBAG05
CARRYING SOFT BAG Carrying bag for CST435 – CST436 – CST450 speaker stand. Length: 102 cm, Ø 13 cm
TBAG25
CARRYING SOFT BAG Carrying bag for 2 CST436 – CST450 speaker stands
59
ACCESSORIES
CD & LP BAGS
SBAG SERIES Professional black carrying bags with a stunning design, for the transportation of 19” equipment. These strong qualitative bags are covered with a solid black polyester coating to protect your valuable equipment. An extra large pocket at the top provides a storage space for all kinds of accessories (cables, plugs, etc.). With their ergonomic and ultra strong shoulder strap these water-resistant soft bags are designed for ‘on the road’ applications.
SBAG02
19” SOFT BAG This sturdy black polyester soft bag is 2 units high and suitable for a number of applications. Specifications
SBAG04
USABLE HEIGHT
USABLE DEPTH
OUTSIDE DIMENSIONS (H x W x D)
WEIGHT
2 units
350 mm
120 x 510 x 380 mm
4,2 kg
19” SOFT BAG This sturdy black polyester soft bag is 4 units high and suitable for a number of applications. Specifications
60
USABLE HEIGHT
USABLE DEPTH
OUTSIDE DIMENSIONS (H x W x D)
WEIGHT
4 units
350 mm
210 x 510 x 380 mm
4,6 kg
SBAG27
CD SOFT BAG This CD soft bag holds up to 75 CDâ&#x20AC;&#x2122;s and is the perfect solution for every mobile DJ. Including 2 large external zip-pockets for housing accessories and an extra strong shoulder strap for carrying. With strengthened construction and soft coated dividing inside. These features make it an unbeatable carrying case for every DJ.
61
ACCESSORIES
RIGGINGS & BRACKETS
Caymonâ&#x20AC;&#x2122;s fly systems simplify rigging and hanging installations and ensure a quick and safe construction thanks to its constant strength and durability tests.
FLY060S
FLY080S
EYE BOLT Eye bolt for speaker cabinets with M6 flying points. Thread length : 30 mm Max load : 70 kg Sold per 4 pcs
EYE BOLT Eye bolt for speaker cabinets with M8 flying points. Thread length : 35 mm Max load : 140 kg Sold per 4 pcs
FLY100S
FLY200
EYE BOLT Eye bolt for speaker cabinets with M10 flying points. Thread length: 35 mm Max load : 230 kg Sold per 4 pcs
FLY HOOK Fly hook for all speaker cabinets with fly hook points. Color : Black coated Weight : 0,08 kg
FLY300
FLY400
FLY HOOK Shackle for rigging purposes. U-shaped with screw bolt Max load : 250 kg
U-FIX Quick link shackle for rigging purposes. Max load : 450 kg
FLY1000
STEEL SERIES
TRUSS HOOK Truss hook for all speakers with M10 fly points. Height : 15 cm Width : 14 cm Weight : 0,46 kg Max load : 35 kg
FLYING STEEL Steel cable for flying systems. Non Certified. With loop on both sides Cable diameter: 4 mm STL025 : length 250 mm, max 50 kg STL050 : length 500 mm, max 50 kg STL075 : length 750 mm, max 50 kg STL100 : length 1000 mm, max 50 kg STL125 : length 1250 mm, max 50 kg STL150 : length 1500 mm, max 50 kg
62
RHB10 19â&#x20AC;? HEADPHONE BRACKET Arm length : 103 mm Arm diameter : 8 mm steel with 11,2 mm soft PVC covering Weight : 82 g Dimensions : 18 x 88,1 x 115,3 mm
WLB25
WLB35
SPEAKER WALL MOUNT BRACKET Height : 250 mm Width: 140 mm Depth : 267,5 mm Tube diameter : 35 mm Color : Black (/B) or white (/W) Weight : 1,96 kg Max load : 40 kg
SPEAKER WALL MOUNT BRACKET Height : 250 mm Width : 140 mm Depth : 367,5 mm Tube diameter : 35 mm Color : Black (/B) or white (/W) Weight : 2,12 kg Max load : 40 kg
CHB196 BUILT-IN HEAD BASE FOR SPEAKER Aluminium flange adaptor. 35 mm to be built in speakers, for use with speakerstands with 35 mm tube diameter. Height : 81 mm Diameter : 110 mm Built-in depth : 75 mm Weight : 0,15 kg Color : Black (/B) or white (/W)
63
NOTES
Any ideas or suggestions? Contact info@caymon.be
INDEX BCO101 BCO242 BP106 BP106T BP108 BP108T BP112 BP112T BSB01 BSB02 BSD02 BSF01 BSF02 BSF003 BSF03 BSF04 BSF005 BSF05 BSF06 BSG01 BSG02 BSV01 BSV02 BSV03 BSV04 BSV05 BSV06 CAS110 CAS110L CASY001 CASY002 CASY003 CASY014T CASY014W CASY018T CASY018W CASY019 CASY021 CASY101 CASY102 CASY103 CASY104 CASY105 CASY106 CASY107 CASY121 CASY122 CASY123 CASY124 CASY125 CASY126 CASY132 CASY135 CASY136 CASY138 CASY141 CASY142 CASY143 CASY148
21 19 22 22 22 22 22 22 21 21 21 20 20 20 20 20 20 20 20 22 22 20 20 20 20 20 20 50 50 28 28 28 29 29 29 29 29 28 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30
CASY151 CASY161 CASY162 CASY167 CASY168 CASY181 CASY182 CASY191 CASY201 CASY202 CASY203 CASY282 CASY285F CASY285G CASY285UK CASY295-30 CASY295-60 CASY295-100 CASY301 CASY302 CASY401 CASY402 CHASSIS CHB196 CMA350 CMC020 CMC024 CMC033 CRD120 CRD130 CRD140 CST010 CST101 CST201 CST210 CST250 CST259 CST301 CST310 CST312 CST354 CST410 CST420/B CST436 CST450 CST465 DPR932 DPR942 EPR406 EPR409 EPR412 FC104 FC106 FC108 FC110 FC116 FCB30 FCB50 FCB104
30 30 30 30 30 30 30 30 31 31 31 31 31 31 31 31 31 31 32 32 32 32 28 63 38 37 37 37 38 38 38 37 36 34 35 38 36 34 35 37 36 39 38 39 39 39 13 13 16 16 16 42 42 42 43 43 50 50 50
FCC104 FCC110 FCC116 FCD056 FCD116 FCE066H FCE126H FCMC12 FCMK103 FCP400MK2 FCP510 FCP610 FCS04 FCS06 FCT066 FCT126 FCX103 FCX104 FCX106 FCX108 FCX110 FLY060S FLY080S FLY100S FLY200 FLY300 FLY400 FLY1000 GPR412 GPR418 GPR424 HPR506 HPR509 IS110 IS210 IS310 KM500 KM600 KM600A KS500 KS600 MBL100 MBL120 MBL220 MCD064 MCD128 MDJ1000 MLP117 MPR115 MPR117 MWP100 MWP200 OPR506 OPR509 OPR512 OPR518 PR206 PR209 PR210WS
52 52 53 47 47 46 46 51 51 49 48 48 54 54 47 47 44 44 44 45 45 62 62 62 62 62 62 62 10 10 10 15 15 25 25 25 21 21 21 21 21 57 56 56 58 58 57 57 58 58 56 56 12 12 12 12 17 17 17
PR212 PR218 PR227 PSR107UKS PSR108E PSR108ES PSR108F PSR108FS PSR108G PSR108GS PSR118ES PSR118FS PSR118GS PSR418F PSR418G PSR518F PSR518G RD110L RD210 RD210L RD310 RD310L RD410 RD410L RHB10 SBAG02 SBAG04 SBAG27 SPR10CS SPR10DC SPR618 SPR627 SPR632 SPR642 SPR832 SPR842 SPRXXFS SPRxxGL SPRXXLR SPRXXPT SPRXXRF SPRXXSS STEEL SERIES STRAIN RELIEF TBAG01 TBAG05 TBAG25 WLB25 WLB35 WPR10RF WPR406 WPR409 WPR412 WPR606 WPR609 WPR612 WPRXXFS WPRXXLR
17 17 17 23 23 23 23 23 23 23 23 23 23 24 24 24 24 26 26 26 26 26 26 26 63 60 60 61 18 18 8 8 8 8 8 8 19 9 18 18 19 19 62 28 59 59 59 63 63 19 14 14 14 14 14 14 19 18
www.caymon.eu info@caymon.eu