Method of installing hardwood flooring

Method of Installing Hardwood Flooring

The glue down method of laying hardwood floors is one of the original methods of installing hardwood flooring. If you want to learn the basics of how to install hardwood flooring using the glue down method, you've come to the right place.

Among do it yourself hardwood floors, those done with the glue down method can be the most stable and enduring. When you are installing hardwood flooring using the glue down method, you can rest assured that you are using a technique that has been time-tested.

Tools Needed When Installing Hardwood Flooring

Tools Needed When Installing Hardwood Flooring Square Notched Trowel Broom and Dust Pan Carpenter's Crayon Circular Saw Glue

Lace Nails Plywood Substrate Sheets Soft Cloths Rubber Gloves

Final Preparation for Installing Hardwood Flooring The glue down method for installing hardwood flooring, it is absolutely essential that the surface where you will be placing your flooring panels is properly prepared. You'll be attaching your flooring panels to this surface, so the floor must be smooth, dry, and as clean as possible to give your hardwood floor a solid support base.

Square Notched Trowel This trowel should have one quarter inch sides for the application of the glue.

Broom and Dust Pan You'll want to constantly be cleaning up any saw dust that could get stuck under your floor panels or get stuck in your connecting joints.

The last thing you need is a lumpy hardwood floor when you're done installing hardwood flooring.

Carpenter's Crayon This is what you use to mark where you'll make your cuts on your panels. You'll also use this to mark up the surface where you'll be laying your panels. You'll want to keep this handy at all times because it is particularly important with the glue down method that everything be done very precisely.

Circular Saw You'll use your circular saw to cut up panels as necessary.

Additionally, you'll use your circular saw to score your substrate sheets every eight inches. This is important for the prevention of curling panels.

Glue Many hardwood panel kits come with their own glue. If you need to buy glue for your hardwood panels.

Lace Nails ď‚— You'll use these nails when connecting

the panels to walls and wall strips.

Plywood Substrate Sheets These are placed on top of the concrete and go underneath your hardwood floor.

Soft Cloths You'll need these to clean up excess glue throughout the process of installing hardwood flooring. If the glue is allowed to set, it'll take extra measure to remove it. In some cases, it requires special chemicals and glue to remove glue once it has set. You'll also need your soft cloths to clean up after you've installed your hardwood floors.

Rubber Gloves It's much better to glue the fingers of your gloves together than your own fingers together! Besides, many people don't like having dried glue on their hands for weeks after they finish installing hardwood flooring.

Final Preparation for Installing Hardwood Flooring This process of installing hardwood flooring waits until the glue is very tacky and then lays the panel in the glue. This keeps you from getting glue smudges all over your panels as you go. Experienced hardwood installers typically use the Walk On method because of the better finished results it can provide. Since you are reading instructions about how to install hardwood floors, we'll assume you're using the Wet Lay method.

Bella Cera Hardwood Floors 400 Oyster Point Blvd, Suite 115 So. San Francisco, CA 94080 Tel.866.599.7999 Fax.650.873.4316

www.bellacerafloors.com/buy-Bella-