iRoad
Optic with silk-screened glass Upward emission of light flow = 0 Optical assembly opens easily and removable plate Cosmowhite 140 W Master Colour 250 W
iRoad iGuzzini
Catalogue news 2005 This catalogue introduces the New Products for Indoor and Outdoor Lighting Systems for the year 2005.
Internal Lighting Systems The internal catalogue illustrates internal fittings.
External Lighting Systems This catalogue presents the whole iGuzzini range of external fittings.
1
iRoad fittings for street and residential lighting can be described many ways: uniform light, no glare, no upward dispersion, in full compliance with the standards that govern against light pollution, a strong and technical image but with great design and dĂŠcor. iRoad can also be installed in parks and other landscaped areas, and parking lots. iRoad means city lighting isn't only something that's functional, but something that communicates a look and feel.
2
iRoad design J. M. Wilmotte
iGuzzini
Height: 10000 mm.
Height: 8000 mm. Link roads, squares, avenues with intense traffic, crossroads. Height: 6000 mm. Squares, avenues and moderate traffic, crossroads.
scale 1:200
3
iRoad design J. M. Wilmotte
iGuzzini
These fittings have professional, road or flood asymmetric optics; arms that extend horizontally; and a range of discharge lamps that allow one to choose the most appropriate chromatic yield for each context. These top-performance fittings were
especially designed for lighting roads and large open areas for public and private use. The iRoad optics have undergone a special treatment making them resistant to atmospheric agents while maintaining their operations capabilities.
Road optics (ST) The Road optics make it possible to obtain a greater distance between the posts, consequently with fewer fixtures, less visual impact, lower purchase, maintenance and power costs.
HST-DE 150 W Rx7s a
0,5 m 1 m
h Uo UL
h
a
Uo
UL
8m
36,7
0,40
0,66
Lmed TI% 1,01
0,18
Uo= Average uniformity of zone examined UL= Longitudinal uniformity Lmed= Average luminance in cd/m2 h= Installation height a= Distance between poles TI= Physiological glare
8,3 m
HST-DE 70 W Rx7s a
h
a
Uo
UL
6m
22,2
0,43
0,80
Lmed TI% 1,01
0,12
0,5 m 1 m
h
Uo UL
4,4 m
Asymmetric Optic (A45째) The Asymmetric optic allows glare and light pollution to be drastically reduced and and also curbs stray light falling onto facades of buildings.
HST-DE 150 W Rx7s a
h
ill. ab. L1xL2
Emax
Emed
10 m 19x19 m 48,77 lux 23,67 lux
a 19 m
h
L1 L2
HST-DE 70 W Rx7s a
h
ill. ab. L1xL2
Emax
Emed
8 m 15x15 m 48,92 lux 27,81 lux h
L1 L2
4
a 15 m
iRoad design J. M. Wilmotte
Optic with silk-screened glass
Innovative lamps: Cosmowhite 140W, Master Colour 250W
Optical assembly opens easily
Removable plate
DIRECT LIGHTING SYSTEMS FOR URBAN AREAS iGuzzini
• Direct lighting system, for use with metal and sodium halide lamps. • Installed on a pole or wall-mounted. • The fixture has the following major components: optical assembly, pole, overhanging arm (single or double), intermediate arm, and wall-mount attachment. • Optical assembly and frame in aluminium alloy, with dual chromium plating, followed by passivation heat treatment at 120° C, acrylic RAL 9007 paint finish. Sodiumcalcium tempered sealing glass with customized silk-screening. The frame is fastened to the optical assembly with two stainless steel captive screws and a hinge system that allows it to be easily opened. 99,5% ultrapure aluminium reflector, 5-6 micron double high-bright finish, with an anodizing treatment. Vertical orientation with a graduated scale. Reflector group secured with captive screws. Porcelain lamp holder secured with anodized aluminium supports and cables with quick-connecting terminals. The lamp is equipped with an anti-loosening device. • When opening the optical assembly the decompression valve eliminates the internal depression.
• Pull-out control gear plate made of anodized aluminium. Power supply with ballast, non-explosive power factor correction capacitor, quick-connecting terminals. A disconnecting switch with fuse is available upon request. • Double insulation and ready for Class I grounding • Thanks to the adjustability of the optical assembly, there is no light dispersion into the upper hemisphere above this luminaire. • All external screws are stainless steel. AISI 304. • Pole is equipped with a single or a double arm. To be ordered separately. • Arms for wall-mounting, or for intermediate installation on poles with D=159mm, made of die-cast aluminium and galvanized steel sheet, with a liquid RAL 9007 acrylic paint treatment. • The technical characteristics of the fitting comply with EN60598-1 standard. • IP67 IK07 • F seal • IMQ-ENEC approval • Class of Insulation II (with provisions for Class I upon request)
Decompression valve
Two entries for cables
Disconnecting switch and fuse upon request
Simulation
Upward emission of light flow = 0
Class II,Class II, with provisions for Class I (upon request)
5
Application of the various types of poles/arms, in single, double, wallmounted, and intermediate versions. The mechanical resistance of the entire system is guaranteed only by original iGuzzini components.
The pole is available in two versions, with fixing plate or for burying. 6
iRoad design J. M. Wilmotte
iGuzzini
Wall-mounting installation is the ideal solution when lighting smaller areas because iRoad is extremely orientable and eliminates parasite lighting phenomena onto vertical supporting walls.
sales order
The commercial order should be completed based on the elements making up the system.
pole with arm
optical assembly
7
All the combinations illustrated can be obtained by combining the single elements presented in the tables. 10000
8000
6000
380
313
scalescala 1:100 1:100
2100
620
1450
2800
*new Cosmowhite (Philips) ** new Master Colour City (Philips)
lamp
colour
optic
B403
70 W
Rx7s
HIT-DE/HST-DE
B404
150 W
Rx7s
HIT-DE/HST-DE
B406
140 W
PGZ12 HST (CPO-TW)*
87
129
ST 585
B405
250 W
G12
HIT (CDM-T)**
B407
70 W
Rx7s
HIT-DE/HST-DE
B408
150 W
Rx7s
HIT-DE/HST-DE
B410
140 W
PGZ12 HST (CPO-TW)*
B409
250 W
G12
127
* DIN guide for D and CH ** Marine grade plywood support for terminal
board for GB
GB
75
82
75
code
colour
code
colour
1128
15
1129
15
The intermediate arm is suitable for installation on all poles.
A (45째)
terminal box
code
colour
1530 1531 1532 1533 1534 1535 1536 1537 1538 1539 1540 1541
0246
00
6000 B943* 8000 10000
6000 B944** 8000 10000
door key
code colour pole
1863
8
wall mounting
HIT (CDM-T)**
accessories for European poles code h pole
D - CH
313
183
214
15
The poles featured in the tables are suitable for fixing on Italian, French and Spanish terminal blocks. For other countries, add the specific fixing systems featured in the table.
intermediate arm
197
code
197
floodlight
00
The terminal blocks have four polarities with three ways per pole and are fitted for bridge wiring. They are made with class II insulation Code 1863 is equipped with two fuse holders for dim. 10,3x38 - 380 V - max 20A. Suitable for power cables with cross-section 16 mm2 on input and 2.5 mm2 on output to hook up with the light source.
iRoad
DIRECT LIGHTING SYSTEMS FOR URBAN AREAS
design J. M. Wilmotte
iGuzzini 03
74
313
15
2800
1450
2800
620
1200
ø160
1200
ø160
1200
ø160
6000
8000
10000
Units for burying are supplied with an anticorrosion reinforcing collar to be fitted on the part which comes out of the ground. The other units are supplied with a base plate and fixing bolts in 70 micron hot galvanised steel, as per UNI regulation 5744-66.
ø
length
6800
1536 160 1539
74 6000
Fixing plate with anchoring bolts code 1167 for poles code 1533-1539
1000
code
ø
length
160 1540
colour
74 8000
Fixing plate with anchoring bolts code 1165 for poles code 1534-1540
length
11000
1532 160
code
74 10000
ø
length
code
size
colour
1842
04
ø 620
colour
11000
1538 160 1541
colour
184
ø
1535
9000
1537
100
400
74 8000
The base for pole is suitable for installation on all poles.
300
base for pole
160
code
colour
9000
1531 1534
colour
length
single
74 6000
1533
ø
double
160
code
colour
single
length
6800
1530
code
1000
50 300
double
single
ø
L=500 ø 24
100
400
280
50 200
code
150 350
1000
L=500 ø 24
100
1000
150 350
150 350
800
L=500 ø 18
50
double
310x95
310x95
1000
310x95
74 10000
Fixing plate with anchoring bolts code 1165 for poles code 1535-1541
9
iRoad design J. M. Wilmotte
DIRECT LIGHTING SYSTEMS FOR URBAN AREAS iGuzzini
03
15
lamp
optic C15-195 γ=54° CIE
Imax=293 cd/Klm
HIT-DE HST-DE HIT-DE HST-DE HST(CPO-TW) HIT(CDM-T)
ST ST ST ST ST ST
ST
70 W
180°
90°
Lux h=6 m. α =0°
nL 0.67 LA 0.5 =620
90° SPREAD=average THROW=short SLI=8 DIN KB2
550
HST-DE - Rx7s
30
HST-DE Rx7s 70W
0°
-2 C15-195 γ=54° CIE
Imax=364 cd/Klm
IP66 IK07 ST
150 W
180°
90°
77
HIT-DE Rx7s 150W
0°
-2 C15-195 γ=54° CIE
Imax=364 cd/Klm
140 W
180°
90°
ST
250 W
90°
8
4
10
12
2
14
16
18 m
4
17 10
6
8
14
16
18 m
16
18 m
5
10
12
0
49 40 32 24 17
2
4
6
8
11
10
12
5
14
Lux h=8 m. α =0°
nL 0.68 LA 0.5 =560 90° SPREAD=narrow THROW=short SLI=5.1 DIN KB2
675
HIT CDM-T - G12
2
68
-2 C15-195 γ=54° CIE 180°
6
68 50 32
0
CPO-TW PGZ12 140W
0° Imax=364 cd/Klm
4
12 9 6
Lux h=6 m. α =0°
nL 0.68 LA 0.5 =402 90° SPREAD=narrow THROW=short SLI=5.6 DIN KB2
675
CPO-TW - PGZ12
2
19
Lux h=6 m. α =0°
nL 0.68 LA 0.5 =617 90° SPREAD=narrow THROW=short SLI=5.2 DIN KB2
675
HIT-DE - Rx7s
ST
0
26
51
HIT CDM-T G12 250W
0°
0
2
4
6
8
10
12
10
14
6
16
87
-2
43 36 29 24 19 14
18 m
129
code
Road Optic B403 70 W 70 W B404 150 W 150 W B406 140 W B405 250 W
Asymmetrical optic 45° B407 70 W HIT-DE 70 W HST-DE B408 150 W HIT-DE 150 W HST-DE B410 140 W HST(CPO-TW) B409 250 W HIT(CDM-T)
,PD[ FG .OP
A45° A45° A45° A45° A45° A45°
& J
313
183
214
585
Lux h=6 m. α =0°
30 23 20 13 7 4
2
:
HIT-DE Rx7s 70W
+,7 '( 5[ V
D
-10 ,PD[ FG .OP
IP66 IK07
& J
-8
-6
-4
-2
0
2
4
6
8
10 m
Lux h=6 m. α =0° 91 70 59 38 20 12 5
:
HST-DE Rx7s 150W
+67 '( 5[ V
D
-10 ,PD[ FG .OP
& J
-8
-6
-4
-2
0
2
4
6
8
10 m
Lux h=6 m. α =0°
101 89
65 42 21 13 6
:
CPO-TW PGZ12 140W
&32 7: 3*=
D
'XPP\
-10 ,PD[ FG .OP
& J
-8
-6
-4
-2
0
2
4
6
8
10 m
Lux h=8 m. α =0° 79
60
50 33
17 11
5
D
HIT CDM-T G12 250W
-8
-6
-4
-2
0
2
4
6
8
10 m
87
-10
129
: +,7 &'0 7 *
10
313
183
214
585
iRoad
DIRECT LIGHTING SYSTEMS FOR URBAN AREAS iGuzzini
• Supplied in versions with a baseplate and for cementing directly into the ground. Available in the following lengths 6 m, 8 m and 10 m (length includes arm). • Poles made of EN10025-S235JR hot galvanized 70 micron steel in compliance with UNI EN ISO 1461 (EN 40-5) standards. • Texturised RAL 9005 powdercoating paint surface finish. • The pole has a cylindrical cross section with a 159 mm diameter • A metallic galvanized steel plate is secured to the upper portion of the pole. It has holes for the fastening of the arms. At about 4 m above ground, there are two perforations and stainless steel inserts that secure the intermediate arm. • The h=6/8m above the ground is 3m thick; the 10m above the ground pole is 4 mm thick • The model that can be cemented into the ground has a cable slot that is 150x50mm. • Anchoring plate is made of 70 micron hot galvanized steel, and has 4 slots. The plate has tie rods that secure it to the ground (to be ordered separately).
• Flush 310x95mm access cover made of aluminium alloy and has a watertight gasket. • 4-pole terminal block with three connections per each pole and double integrated fuse; designed for 16mm2 feed cables and 2,5mm2 exit cables that connect the lamp. • Suitable for terminal blocks that are Italian, French, Spanish (only small), and English (with B944 marine grade plywood adapter that can be ordered separately), and German/Swiss (with B943 DIN guide that can be ordered separately). • Internal grounding system with grounding lug, steel insert, and stainless steel screw. • Equipped with single or double arm, with respective lengths of 1450mm and 2800mm. The vertical part of the arm is made of 100x20mm steel profile. The horizontal part of the arm is made of steel sheet with hot galvanized cover. Texturized RAL 9007 acrylic paint surface treatment. • Arms secured to pole via 4 M10 UNI5931 AISI 304 stainless steel screws. • IP44
Flush inspection lid IP44 suitable for terminal boards UK - F - CH - E
Plate with slot
Simulation
design J. M. Wilmotte
Arm connected flush with pole
11