Sodium vapors H.P. Rx7s
TECHNICAL DATA Code Product name Column external diameter Minimum column door dimensions Mains voltage
Rx7s
70W 150W HST-DE
E27
70W HST
G880 W-saving 250 V1 ST 21-27 121 - 138mm 45x186mm 230V +/- 6% - 50/60Hz -20….+45°C IP 43 98%
Operating temperature IP degree Efficiency Output voltage (power) of the devices Full 230V (100%) Step1 195V (72%) Step2 185V (64%) Step3 175V (58%) Step4 168V (52%) Battery CR2032 Battery lifetime 10 years Network cable FG70R 3x1.5mm length 1m Lamp cable FG70R 3x1.5mm length 1m Dimensions 107x246x40mm Weight 1,8 Kg Brands CE
Mercury vapors H.P. E40
E40
E40
E27
100W
150W
250W
70W HSE
E40
E40
E40
100W
150W
250W
E27
50W HME
E27
E27
E27
80W
125W
250W
G881 W-saving 250 V1 XR 21-27 121 - 138mm 45x186mm 230V +/-10% - 50/60Hz -20….+45°C IP 43 98%
G882 W-saving 250 V1 ST 39-60 139 - 160mm 45x186mm 230V +/- 6% - 50/60Hz -20….+45°C IP 43 98%
G883 W-saving 250 V1 XR 39-60 139 - 160mm 45x186mm 230V +/-10% - 50/60Hz -20….+45°C IP 43 98%
G884 W-saving 250 V1 ST 61-94 161 - 194mm 45x186mm 230V +/- 6% - 50/60Hz -20….+45°C IP 43 98%
G885 W-saving 250 V1 XR 61-94 161 - 194mm 45x186mm 230V +/-10% - 50/60Hz -20….+45°C IP 43 98%
220V (92%) 195V (72%) 185V (64%) 175V (58%) 168V (52%) CR2032 10 years FG70R 3x1.5mm length 1m FG70R 3x1.5mm length 1m 107x246x40mm 1,8 Kg CE
230V (100%) 195V (72%) 185V (64%) 175V (58%) 168V (52%) CR2032 10 years FG70R 3x1.5mm length 1m FG70R 3x1.5mm length 1m 107x246x40mm 1,8 Kg CE
220V (92%) 195V (72%) 185V (64%) 175V (58%) 168V (52%) CR2032 10 years FG70R 3x1.5mm length 1m FG70R 3x1.5mm length 1m 107x246x40mm 1,8 Kg CE
230V (100%) 195V (72%) 185V (64%) 175V (58%) 168V (52%) CR2032 10 years FG70R 3x1.5mm length 1m FG70R 3x1.5mm length 1m 107x246x40mm 1,8 Kg CE
220V (92%) 195V (72%) 185V (64%) 175V (58%) 168V (52%) CR2032 10 years FG70R 3x1.5mm length 1m FG70R 3x1.5mm length 1m 107x246x40mm 1,8 Kg CE
STUDIO CONTI
Type of lamps
Avaiable version for UK with 240V main voltage
W-Saving can be used with 3 different types of column (external diameter between 121 and 138 mm, between 139 and 160 mm, between 161 and 194 mm) and has 2 different operating modes: one version guarantees full power at the first step (230V), while the other guarantees an energy saving of 8% at the first step (220V). W-saving can only be installed in combination with phased electromagnetic control gears. W-Saving is equipped with: · Automatic lock spring inside the pole · Network cable · Lamp cable with IP68 connector · Cable for RS232 (optional)
W-Saving Easy installation Installation is quick and easy. Through the pole lid, simply connect the input cable to the terminal board and the w-saving output cable to the lamp cable.
distribuited by Gitronica S.p.A. via Avogadro, 22/B 62010 Montelupone (MC) Italy Tel. +39/0733 225211 Fax +39/0733 225251 marketing@gitronica.com www.gitronica.com
UNITED KINGDOM iGuzzini illuminazione UK LTD Unit 3 Mitcham Industrial Estate 85 Streatham Road MITCHAM SURREY CR4 2AP Tel. 0208 646 4141 Fax 0208 640 6910 info@iguzzini.co.uk
NORWAY iGuzzini illuminazione Norge A.S. Brynsveien 5 0667 OSLO Tel. 23067850 Fax 22648737 iguzzini.norge@iguzzini.no
DENMARK iGuzzini illuminazione Danmark Filial af iGuzzini illuminazione Spa, Italien Kalvebod Hus Bernstorffsgade 35 1577 KØBENHAVN V Tel. 33 17 95 95 Fax 33 17 95 96 info@iguzzini.dk
BENELUX Belgium and Luxembourg iGuzzini illuminazione Benelux Bvba/Sprl Residentie “Het Museum II” Museumstraat 11, BUS A B-2000 ANTWERPEN Tel. +32 (0)3 241 14 00 Fax +32 (0)3 248 66 48 info@iguzzini.be
The Netherlands iGuzzini illuminazione Benelux Bvba/Sprl Plesmanstraat 59 3905 KZ Veenendaal Tel. +31 317 497 865 Fax +31 317 497 866 info@iguzzini.nl
25606060
9.1734.000.0
Power controller for public lighting systems
W-SAVING Power controller for public lighting systems
W-Saving is the new flux controller developed to control the individual columns used in public lighting systems. Sophisticated software and technologically simple components work together to achieve maximum efficiency and maximum energy saving.
W-saving can be identified by the following features: › Personalized daily programming cycle › Energy saving up to 40% › Low environmental impact › Increased lamp life › Reduced maintenance › Easy installation › Fast investment payback
Personalized cycles W-Saving is researched to satisfy energy saving requirements in accordance with the various types of applications. With W-Saving, individual columns can be set to a suitable lighting level, thereby optimizing energy efficiency, based on a timetable and on different applications: you can chose the most appropriate calendar from 3 different preset cycles, which means the level of light emitted by the lamp can be adjusted
between 5 different levels in every planned phase. Energy saving Depending on the program selected, W-saving controls the voltage of the lamp to guarantee the correct lighting level in accordance with the various lighting requirements during the night. Laboratory tests and experiments on public lighting installations demonstrate that the energy savings achieved can reach 40%. This figure may
increase when w-saving is installed in old systems or systems which have suffered from a lack of maintenance.
Lamp life increased W-saving controls lighting levels and maintains them within the correct voltage range in accordance with the specific performance characteristics as determined by the lamp manufacturers. The result is increased lamp life.
Low impact on environment W-saving reduces the pollution created by the production of electricity. The electrical energy produced by heating plants based on the combustion of hydrocarbons produces CO2 in the air. W-saving contributes to energy saving and as a result reduces CO2 emissions.
System reliability In systems which are controlled using centralised equipment, every system fault can affect the power supply of the entire system,
or if the regulator is excluded it will no longer be capable of reducing the luminous flux. All energy saving will therefore be suspended until technical assistance arrives. Faults in a W-saving system do not compromise the reliability of the system or the total energy saving achieved.
of maintenance work and makes it easier to perform. Fast payback of the investment The cost of W-Saving can be repaid in a short time, considering the energy saving, the greater duration of the lamps, and the reduced number of technical assistance/maintenance callouts. The repayment rate correlates to the different power of lamps (W) and to the degree efficiency of the system.
Reduced maintenance The use of technologically simple components minimises the necessity
TRAFFIC-HEAVY ROADS OR PUBLIC PARKING
PUBLIC PARKS AND TOWN CENTRES
TOURIST SITES
The regional laws for energy saving and the main laws relating to street lighting require the adaptation of lighting levels in accordance with daily traffic, to optimize energy saving and to reduce environmental pollution, while guaranteeing safety on the streets.
For lighting of public parks and town centres the energy saving is connected to the lighting cycle activated. Depending on the daily time and the season, the lighting needs and energy savings may change. In these places there are no specific laws relating to energy saving.
At tourist and holiday sites the level of lighting changes during the year. It will reduce in squares or streets during the hours when there are less people, especially in the low season, and it will increase in the high season.
-135 kg CO2 emission per year with a 250 W lamp High pressure Sodium vapors
- 42,5 kg CO2 emission per year with a 100 W lamp High pressure Sodium vapors
- 46 kg CO2 emission per year with a 100 W lamp High pressure Sodium vapors
34%
120% 100% 80% 60%
120% 100% 80% 60%
40%
40%
20%
20%
0% 14:24 16:48
25% 19:12
21:36
0:00
2:24
4:48
7:12 9:36
120% 100% 80% 60% 40%
28%
0% 18:00
21:00
0:00
3:00
6:00
9:00
20% 0% 17:00
21:00
0:00
Summer
Comparison between the operating costs of a device using W-Saving technology (blue line) and another using traditional lighting (red line).
Comparison between the operating costs of a device using W-Saving technology (blue line) and another using traditional lighting (red line).
800 700 600 500 400 300 200 100 0
Comparison between the operating costs of a device using W-Saving technology (blue line) and another using traditional lighting (red line).
300,0 250,0 200,0 150,0 100,0 50,0 0,0
1
2
3
4
5
6
7
1
2
3
4
5
6
7
3:00
6:00
9:00
Winter
500,0 450,0 400,0 350,0 300,0 250,0 200,0 150,0 100,0 50,0 0,0 1
2
3
4
5
6
7
W-SAVING Power controller for public lighting systems
W-Saving is the new flux controller developed to control the individual columns used in public lighting systems. Sophisticated software and technologically simple components work together to achieve maximum efficiency and maximum energy saving.
W-saving can be identified by the following features: › Personalized daily programming cycle › Energy saving up to 40% › Low environmental impact › Increased lamp life › Reduced maintenance › Easy installation › Fast investment payback
Personalized cycles W-Saving is researched to satisfy energy saving requirements in accordance with the various types of applications. With W-Saving, individual columns can be set to a suitable lighting level, thereby optimizing energy efficiency, based on a timetable and on different applications: you can chose the most appropriate calendar from 3 different preset cycles, which means the level of light emitted by the lamp can be adjusted
between 5 different levels in every planned phase. Energy saving Depending on the program selected, W-saving controls the voltage of the lamp to guarantee the correct lighting level in accordance with the various lighting requirements during the night. Laboratory tests and experiments on public lighting installations demonstrate that the energy savings achieved can reach 40%. This figure may
increase when w-saving is installed in old systems or systems which have suffered from a lack of maintenance.
Lamp life increased W-saving controls lighting levels and maintains them within the correct voltage range in accordance with the specific performance characteristics as determined by the lamp manufacturers. The result is increased lamp life.
Low impact on environment W-saving reduces the pollution created by the production of electricity. The electrical energy produced by heating plants based on the combustion of hydrocarbons produces CO2 in the air. W-saving contributes to energy saving and as a result reduces CO2 emissions.
System reliability In systems which are controlled using centralised equipment, every system fault can affect the power supply of the entire system,
or if the regulator is excluded it will no longer be capable of reducing the luminous flux. All energy saving will therefore be suspended until technical assistance arrives. Faults in a W-saving system do not compromise the reliability of the system or the total energy saving achieved.
of maintenance work and makes it easier to perform. Fast payback of the investment The cost of W-Saving can be repaid in a short time, considering the energy saving, the greater duration of the lamps, and the reduced number of technical assistance/maintenance callouts. The repayment rate correlates to the different power of lamps (W) and to the degree efficiency of the system.
Reduced maintenance The use of technologically simple components minimises the necessity
TRAFFIC-HEAVY ROADS OR PUBLIC PARKING
PUBLIC PARKS AND TOWN CENTRES
TOURIST SITES
The regional laws for energy saving and the main laws relating to street lighting require the adaptation of lighting levels in accordance with daily traffic, to optimize energy saving and to reduce environmental pollution, while guaranteeing safety on the streets.
For lighting of public parks and town centres the energy saving is connected to the lighting cycle activated. Depending on the daily time and the season, the lighting needs and energy savings may change. In these places there are no specific laws relating to energy saving.
At tourist and holiday sites the level of lighting changes during the year. It will reduce in squares or streets during the hours when there are less people, especially in the low season, and it will increase in the high season.
-135 kg CO2 emission per year with a 250 W lamp High pressure Sodium vapors
- 42,5 kg CO2 emission per year with a 100 W lamp High pressure Sodium vapors
- 46 kg CO2 emission per year with a 100 W lamp High pressure Sodium vapors
34%
120% 100% 80% 60%
120% 100% 80% 60%
40%
40%
20%
20%
0% 14:24 16:48
25% 19:12
21:36
0:00
2:24
4:48
7:12 9:36
120% 100% 80% 60% 40%
28%
0% 18:00
21:00
0:00
3:00
6:00
9:00
20% 0% 17:00
21:00
0:00
Summer
Comparison between the operating costs of a device using W-Saving technology (blue line) and another using traditional lighting (red line).
Comparison between the operating costs of a device using W-Saving technology (blue line) and another using traditional lighting (red line).
800 700 600 500 400 300 200 100 0
Comparison between the operating costs of a device using W-Saving technology (blue line) and another using traditional lighting (red line).
300,0 250,0 200,0 150,0 100,0 50,0 0,0
1
2
3
4
5
6
7
1
2
3
4
5
6
7
3:00
6:00
9:00
Winter
500,0 450,0 400,0 350,0 300,0 250,0 200,0 150,0 100,0 50,0 0,0 1
2
3
4
5
6
7
Sodium vapors H.P. Rx7s
TECHNICAL DATA Code Product name Column external diameter Minimum column door dimensions Mains voltage
Rx7s
70W 150W HST-DE
E27
70W HST
G880 W-saving 250 V1 ST 21-27 121 - 138mm 45x186mm 230V +/- 6% - 50/60Hz -20….+45°C IP 43 98%
Operating temperature IP degree Efficiency Output voltage (power) of the devices Full 230V (100%) Step1 195V (72%) Step2 185V (64%) Step3 175V (58%) Step4 168V (52%) Battery CR2032 Battery lifetime 10 years Network cable FG70R 3x1.5mm length 1m Lamp cable FG70R 3x1.5mm length 1m Dimensions 107x246x40mm Weight 1,8 Kg Brands CE
Mercury vapors H.P. E40
E40
E40
E27
100W
150W
250W
70W HSE
E40
E40
E40
100W
150W
250W
E27
50W HME
E27
E27
E27
80W
125W
250W
G881 W-saving 250 V1 XR 21-27 121 - 138mm 45x186mm 230V +/-10% - 50/60Hz -20….+45°C IP 43 98%
G882 W-saving 250 V1 ST 39-60 139 - 160mm 45x186mm 230V +/- 6% - 50/60Hz -20….+45°C IP 43 98%
G883 W-saving 250 V1 XR 39-60 139 - 160mm 45x186mm 230V +/-10% - 50/60Hz -20….+45°C IP 43 98%
G884 W-saving 250 V1 ST 61-94 161 - 194mm 45x186mm 230V +/- 6% - 50/60Hz -20….+45°C IP 43 98%
G885 W-saving 250 V1 XR 61-94 161 - 194mm 45x186mm 230V +/-10% - 50/60Hz -20….+45°C IP 43 98%
220V (92%) 195V (72%) 185V (64%) 175V (58%) 168V (52%) CR2032 10 years FG70R 3x1.5mm length 1m FG70R 3x1.5mm length 1m 107x246x40mm 1,8 Kg CE
230V (100%) 195V (72%) 185V (64%) 175V (58%) 168V (52%) CR2032 10 years FG70R 3x1.5mm length 1m FG70R 3x1.5mm length 1m 107x246x40mm 1,8 Kg CE
220V (92%) 195V (72%) 185V (64%) 175V (58%) 168V (52%) CR2032 10 years FG70R 3x1.5mm length 1m FG70R 3x1.5mm length 1m 107x246x40mm 1,8 Kg CE
230V (100%) 195V (72%) 185V (64%) 175V (58%) 168V (52%) CR2032 10 years FG70R 3x1.5mm length 1m FG70R 3x1.5mm length 1m 107x246x40mm 1,8 Kg CE
220V (92%) 195V (72%) 185V (64%) 175V (58%) 168V (52%) CR2032 10 years FG70R 3x1.5mm length 1m FG70R 3x1.5mm length 1m 107x246x40mm 1,8 Kg CE
STUDIO CONTI
Type of lamps
Avaiable version for UK with 240V main voltage
W-Saving can be used with 3 different types of column (external diameter between 121 and 138 mm, between 139 and 160 mm, between 161 and 194 mm) and has 2 different operating modes: one version guarantees full power at the first step (230V), while the other guarantees an energy saving of 8% at the first step (220V). W-saving can only be installed in combination with phased electromagnetic control gears. W-Saving is equipped with: · Automatic lock spring inside the pole · Network cable · Lamp cable with IP68 connector · Cable for RS232 (optional)
W-Saving Easy installation Installation is quick and easy. Through the pole lid, simply connect the input cable to the terminal board and the w-saving output cable to the lamp cable.
distribuited by Gitronica S.p.A. via Avogadro, 22/B 62010 Montelupone (MC) Italy Tel. +39/0733 225211 Fax +39/0733 225251 marketing@gitronica.com www.gitronica.com
UNITED KINGDOM iGuzzini illuminazione UK LTD Unit 3 Mitcham Industrial Estate 85 Streatham Road MITCHAM SURREY CR4 2AP Tel. 0208 646 4141 Fax 0208 640 6910 info@iguzzini.co.uk
NORWAY iGuzzini illuminazione Norge A.S. Brynsveien 5 0667 OSLO Tel. 23067850 Fax 22648737 iguzzini.norge@iguzzini.no
DENMARK iGuzzini illuminazione Danmark Filial af iGuzzini illuminazione Spa, Italien Kalvebod Hus Bernstorffsgade 35 1577 KØBENHAVN V Tel. 33 17 95 95 Fax 33 17 95 96 info@iguzzini.dk
BENELUX Belgium and Luxembourg iGuzzini illuminazione Benelux Bvba/Sprl Residentie “Het Museum II” Museumstraat 11, BUS A B-2000 ANTWERPEN Tel. +32 (0)3 241 14 00 Fax +32 (0)3 248 66 48 info@iguzzini.be
The Netherlands iGuzzini illuminazione Benelux Bvba/Sprl Plesmanstraat 59 3905 KZ Veenendaal Tel. +31 317 497 865 Fax +31 317 497 866 info@iguzzini.nl
25606060
9.1734.000.0
Power controller for public lighting systems