FuELRANGE AftermarketProgram Wßrth – your partner for automotive repair and refinishing trade
NEW
The complete range Function improvers for all fuels, oils and radiators.
Contents Why use a Function Improver? 2 Fuel 3 Biodiesel 4 Gas and Oil Function Improver 5 Diesel Treatment AR 6 Diesel Injection Cleaner 7 Cetane Booster 8 Diesel Particulate Filter Cleaner 9 Diesel Combustion Chamber Cleaner 10 Diesel System Cleaner 11 Petrol Treatment 12 Petrol Injection Cleaner 13 Lead Substitute 14 Petrol System Cleaner 15 Octane Booster 16 Air Intake And Throttle Valve Cleaner 17 LPG Treatment 18 Engine Oil Treatment 19 Engine Flush & Cleaner 20 Transmission Treatment Manual 21 Auto Transmission Flush 22 Auto Transmission Treatment 23 Radiator Seal HP 24 Radiator Seal 25 Radiator Cleaner And Conditioner 26 Notes 27 Power Spectrum 28–29 TÜV - Certificates 30 Environmental Protection 31
Why use a function improver? Function improvers are often present in branded fuels / oils, but in many cases not in a sufficient quality and quantity. Why can fuels and engine oils cause problems? • Fuel qualities can vary strongly • Poor age-resistant biofuels are used more often • The fuel is partially exposed to long standing times • Extreme operating conditions exist such as high temperatures or city traffic • The service intervals are lengthened ingreasingly • Unsuitable engine oils can damage the fuel system Clean combustion ensures less fuel consumption During the combustion process, very fine particles are formed in the engine which can settle at various places in the fuel system. This leads to increased fuel consumption, higher soot emissions, more pollutants and a general impairment of the engine power output. Würth Function Improvers remove existing deposits, protect the fuel circuit from establishing new ones and optimise the combustion. At the bottom line this means: less repair costs, less fuel consumption, higher operational reliability, better environmental protection and more engine power output.
2
FuELRANGE Aftermarket-Program
Fuel Deposits in the fuel system are the decisive topic for both petrol and diesel fuels. Dispersants in the W端rth Function Improvers act as a fuel soluble tenside and ensure cleanliness in the combustion chamber and on the injection valves. They detach deposits and prevent them from accumulating again. Petrol: The octane number / pinking: Pinking occurs in spark-ignition combustion engines when the fuel/air mixture in the cylinder is not ignited by the spark plug but instead through self-ignition in pockets outside the normal combustion front. The fuel/air mixture should be exclusively ignited by the spark plug at a precisely defined point in time in the operating cycle. With self-ignition the maximum combustion pressure does not occur at the optimal point in time for a four-stroke engine anymore. The octane number prevails for this property of the fuel. In case of petrol the Octane Booster can increase the octane number on the basis of non-poisonous, organic ethers. These components are contained in the W端rth Function Improvers, in the Octane Booster in a concentrated composition. Diesel: The cetane number / knocking: Cetane Booster based on organic nitrate provides for a smoother engine and can reduce the fuel consumption. This value can be increased with the addition of a W端rth Function Improver. Oxidation stability: Whereas in the past and for older engines an emulsifying effect of the fuel injections to remove water off the tank was preferred, nowadays a demulsifying effect is required. If the diesel fuel dissolves a high percentage of water, the pressure existing in the engine can cause damage through cavitation. Lubrication: Diesel function improvers increase the lubricity of the engine and prevent attrition. This is particularly important for modern common-rail-diesel engines.
FuELRANGE Aftermarket-Program
3
Biodiesel Biodiesel: Bacteria: Great problems with storing biodiesel! A trial conducted by the University of Oldenburg researched the long-term storage behaviour of pure rapeseed oil methyl ester as well as for different mixtures of conventional diesel fuel and biodiesel. The project investigated the growth of naturally occurring micro-organisms which are able to use certain components of the fuel as a nutrient. With storage temperatures of 25째C an addition of small concentrated rapeseed oil methyl ester can already lead to a dramatic increase of bacterial count. Oxidation stability: Antioxidants can positively influence the ageing stability of fuels particularly for biodiesel fuels. Compatibility of the function improvers with biodiesel: Through an increased application of biodiesel, even in standard diesel fuels, standard agents are no longer qualified for use. The W체rth Function Improver Diesel was also developed for diesel fuels with a high percentage of biodiesel. Bio-ethanol: Compatibility of the function improvers with E10: In case of suspectible automobiles the increased percentage of bio-ethanol can cause to corrosion. Tis concerns primarily the aluminium parts in an engine. At the same time fuel lines, seals, other rubber and plastic parts can rapidly become porous. The new W체rth Function Improvers are compatible with E10 and protect the fuel system from corrsion.
4
FuELRANGE Aftermarket-Program
GAS Is it really necessary to use dedicated products for gaspropelled vehicles? Yes, because the higher pressures in the throttle operation can cause damage in the area of the valve seats. Würth Function Improvers protect strongly punished parts from these damages, prevent against engine damages and therefore ensure a problem-free operation of gas-propelled vehicles. CNG = Compressed Natural Gas = natural gas LPG = Liquified Petroleum Gas = automobile gas Depending on the market the gas quality can vary. The Würth Function Improver LPG therefore contains a cleaning agent which helps to keep the injectors clean.
Oil Function improver OMC2-Technology. Advantages of the
For less attrition and a longer service life of the engine! Due tue friction for every driven kilometre, very fine particles from the engine remain. The Würth attrition function improvers ensure, that the attrition
OMC2-Technology: • Improved lubricating film • Reduced thermal loading
strinkingly decreases. Engine oil function improvers are added directly into the oil filler opening of the engine and clean the system or reduce the friction. Clean engines perform better and consume less fuel.
• Less friction (up to 50% in mixed friction area) • Reduced loss of substance
• Dispersants / detergents stabilise dirt particles in the engine oil
• Reduced wearing
• Antioxidants prevent accumulation of ageing products
• Longer service life
• Offer protection against corrosion • Contain an alkali reserve to protect against acid ageing products
OMC2-Technology saves
• Offer wear protection, also under the most extreme operating conditions
money for you!
FuELRANGE Aftermarket-Program
5
Diesel Treatment AR For modern diesel engines with common-rail and pumpnozzle technology with integrated protection against accumulation of bacteria.
Art. No. 5861 006 300 = 300 ml Properties • The lubricity of the diesel fuel is improved measured according to the HFRR test1 DIN ISO 12156 • Increasing the service life of moving parts of the diesel system • Low surface erosion • Lower risk of breakdown of the injection system • Ensures exact diesel injection • Lower fuel consumption • A smooth running engine • Bio-fuels are protected against deposits from "antioxidants" due to oxidation • Protects the fuel system from corrosion • Improves the cetane number • Reduces fuel related "knocking" • Increases the ignitability of the diesel fuel
Information Designation Diesel Treatment AR
Contents Art. No. 300 ml 5861 006 300
P.Qty. 1/12
1 HFRR = high-frequency reciprocating rig
Areas of application / use A surface-active agent combination based on the
Application Add content of can to the tank. There should be at least 10 litres of diesel fuel in the tank when using it.
surface manufactured on the basis of synthetic components. The applied agent is compatible with
Dosage
diesel fuels used nationally and internationally. Is
300 ml is sufficient for 30 to 50 litres of diesel fuel. For
added to the diesel fuel as a preventative measure
permanent use add 0.15% to 0.20% of the fuel volume
after all repair work on the fuel injection system and
to the fuel.
after making adjustments on the engine. Prolongs the biodiesel storage stability.
6
FuELRANGE Aftermarket-Program
Diesel Injection Cleaner For all commonly used diesel engines.
Art. No. 5861 011 300 = 300 ml Properties • Loosens and removes deposits, particularly in the micro range of the injection pump and injection nozzles • Reduces the proportion of critical exhaust contents • Neutralises and binds acid condensate • Protects the fuel system from corrosion • Cleans and protects from the tank to the combustion chamber • Improves the cetane number (ignitability) • Reduces fuel related "knocking" • Increases the lubricating effect of low sulphur fuel
Areas of application / use • After all repair work on the fuel injection system and in the area of the engine • After all setting up work • When there are difficulties getting the engine started
Technical features • An agents concentrate based on synthetic components as used in national and international diesel fuels • Does not contain any flow enhancer
Information Designation Diesel Injection Cleaner Diesel Injection Cleaner Diesel Injection Cleaner
Contents 150 ml 300 ml 1000 ml
Art. No. 5861 011 150 5861 011 300 5861 011 001
P.Qty. 12 12 12
Application Add content of can to the tank.
Dosage 300 ml is sufficient for 30 to 50 litres of diesel fuel. 1'000 ml is sufficient for 200 litres of diesel fuel. For permanent use add 0.15% to 0.20% of the fuel volume to the fuel.
FuELRANGE Aftermarket-Program
7
Cetane Booster A function improver to improve the ignition behaviour of diesel fuels.
Art. No. 5861 005 300 = 300 ml Properties • Improvement of the ignition quality of diesel fuels • Reduction of engine noises • Reduction of emissions • Improvement of the cold start behaviour • Lowering the fuel consumption • Clean burning
Areas of application / use A function improver to improve the ignition behaviour of diesel fuels in low aromatics containing hydrocarbons.
Application / dosage Add the function improver directly to the fuel. The dosage is depending on the cetane number of the current fuel and the desired cetane number for the final fuel.
8
FuELRANGE Aftermarket-Program
Information Designation Cetane Booster
Contents Art. No. 300 ml 5861 005 300
P.Qty. 12
Diesel Particulate Filter Cleaner A non-ignitable, metal-free cleaner for detaching and removing hydrocarbon and ash deposits in diesel particulate filters. The carrier liquid ensures smooth removal of the soot particles.
Art. No. 5861 014 500 = 400 ml Properties
with extra extended
• Is excellent at detaching and removing hydrocarbon
spray hose
deposits in particulate filters • Not ignitable • Cleaning is possible without disassembling the particulate filter • A neutral, ash and metal-free formulation • Evaporates without leaving a residue
Areas of application / use • To restore the full absorption capacity of a diesel particulate filter • To be used in case of loss of power or malfunctions due to a dirty/blocked diesel particulate filter • As a preventive for unfavourable driving conditions
Information Designation Contents Art. No. Diesel Particulate Filter Cleaner 400 ml 5861 014 500
P.Qty. 12
Application Remove the temperature or pressure sensors before the particulate filter, under cold conditions. Spray the aerosol with the special hose through the resulting opening towards the particulate filter. Subsequently perform a test drive for at least 20 minutes.
Special notes If it is not possible to perform a test drive the regeneration must be initiated manually over the tester.
FuELRANGE Aftermarket-Program
9
Diesel Combustion Chamber Cleaner Active substance for cleaning the injection system of diesel fuel vehicles. Caters for optimal consumption, low-soot and particle-reducing combustion.
Art. No. 5861 012 300 = 300 ml Properties • Cleans the fuel system and the combustion area • Detaches and removes deposits, oil carbon and soot • Optimises the fuel consumption • Restores an engine to full power • Prevents corrosion
Areas of application / use • For all diesel engines in passenger cars and lorries • For cleaning of the injection systems when problems arise • For strong soot production • Before performing emission measurements (ASU) on a vehicle • To restore an engine to its full power output • For problems in operating with biofuels
Application Add content of can to the tank. The amount of fuel should at least be the reserve volume. It is recommended to replace the fuel filter after cleaning.
10
FuELRANGE Aftermarket-Program
Information Designation
Contents Art. No. 5861 012 300
Diesel Combustion Chamber Cleaner 300 ml
P.Qty. 12
Diesel System Cleaner A highly active system cleaner for removing dirt and deposits in the air intake area without any disassembly work.
Art. No. 5861 013 300 = 300 ml Properties • Improves the engine performance • Suitable for use with engines with catalytic converters • Optimises the carburettor performance • Cleans the air intake system free of light to medium deposits
Areas of application / use • Throttle flap cleaning for diesel engines
Application Only clean when the engine is at its operating temperature. Allow the engine to warm up for at least 10 minutes. Run the engine at different speeds during the application up to a maximum of 2'000 rpm.
Information Designation Diesel System Cleaner
Contents Art. No. 300 ml 5861 013 300
P.Qty. 12
• Use short spraying for a maximum of 3 seconds at a time • Take a break of 10 seconds after each spraying session • Avoid accumulations of liquid
Special note No use of a probe; just use the nozzle head supplied!
FuELRANGE Aftermarket-Program
11
Petrol Treatment → An optimised formulation For all petrol engines, with and without a catalytic converter.
Art. No. 5861 101 300 = 300 ml Properties • Cleans the petrol pump, lines and carburettor free of resin and varnish-like deposits and oxidations residues • Increases the service life of catalytic converters and oxygen sensors through optimal combustion • Reduces the fuel consumption through exact preparation of the fuel
Areas of application / use • In cases of dirt in the fuel system • When using E10 • In case of varnish-like deposits and resin deposits occurring on the lines, petrol pump, carburettor, valve seats and valves
Technical features • The cleaning effect has been demonstrated by a full engine test
Application Add content of can to the tank.
Dosage Add contents of can to the fuel tank. The optimum dosing is 150 ml for 35 to 40 liters. 300 ml are sufficient for 70 to 75 liters. The product is self - mixing. Overdosing is not harmful.
12
FuELRANGE Aftermarket-Program
Information Designation Petrol Treatment Petrol Treatment
Contents Art. No. 150 ml 5861 101 150 300 ml 5861 101 300
P.Qty. 12 12
Petrol Injection Cleaner → An optimised formulation A special cleaner for carburettor and petrol injection engines with and without a catalytic converter.
Art. No. 5861 111 300 = 300 ml Properties • Binds and neutralises acid condensate • Protects the fuel system from corrosion • Removes resin and varnish-like deposits in the micro range on injection valves and the fuel quantity distributor • Secures precise control of the injection valves • Leads to savings on fuel due to exact fuel injection and atomisation
Areas of application / use • In cases of increased fuel consumption due to poor fuel injection • Can be used as prevention at every inspection • For all petrol injection engines, with and without a catalytic converter • When the engine is running roughly
Information Designation Petrol Injection Cleaner Petrol Injection Cleaner
Contents Art. No. 150 ml 5861 111 150 300 ml 5861 111 300
P.Qty. 12 12
Application Add content of can to the tank.
Dosage Ideal dosing: One can for 50 litres of fuel.
FuELRANGE Aftermarket-Program
13
Lead Substitute A function improver for engines which do not have hardened valve seats.
Art. No. 5861 102 250 = 250 ml Properties • Contains organic sodium compounds which creates a protective layer over valve seats and valve discs • Prevents deformation and battering of valves • Protects against knocking, pinking and retrospective ignition by the engine • Increases the service life of the valves, the exhaust valves and the complete fuel system • Does not contain any heavy metal compounds • Can also be used on vehicles with a retrofitted, unregulated catalytic converter
Areas of application / use For engines with unhardened valve seats (passenger cars, old-timers, lawnmowers, boat engines, stationary engines).
Application The Petrol Lead Substitute is self-mixing and is added over the metering head to the fuel. Simple to use due to the practical metering head.
Dosage The content of the can are sufficient to treat 250 litres of fuel.
14
FuELRANGE Aftermarket-Program
Information Designation Lead Substitute
Contents Art. No. 250 ml 5861 102 250
P.Qty. 12
Petrol System Cleaner → An optimised formulation A special cleaner for carburettor and petrol injection engines with and without a catalytic converter.
Art. No. 5861 112 300 = 300 ml Properties • Cleans the complete air intake area, the combustion chambers and the valves • Equal distribution of the cleaner in the intake area thru the aerosol can with its special spray hose • Brings increased fuel consumption down again • Improves the engine performance, throttle response and warming up phase • Cleans the intake and exhaust valve guides • Leads to an even compression pressure • Protects against burning out valves and creates a secure valve seat • Increases the service life of the engine • Contains washing active, fuel compatible agents in a cleaning-active solvent
Areas of application / use • For cases of compression loss • In case of increased fuel consumption. In case of a poor engine performance
Information Designation Petrol System Cleaner
Contents Art. No. 300 ml 5861 112 300
P.Qty. 12
Application Unclamp the vacuum hose at a suitable location and
• In case of a delayed throttle response
introduce the spray hose probe. With the engine running
• Particularly suitable for use before setting up the
at its normal operating temperature at about 2'000 rpm,
engine prior to perform exhaust emission tests (AU)
spray half of the product evenly into all intake ducts through simultaneous back and forth movement of the
Note The system cleaner can only be used in combination with the spray hose probe.
probe. Allow to work for about 30 minutes then use the rest of the cleaner.
Dosage 1 can for a 4-cylinder engine; 2 cans for engines with 6 cylinders or more. FuELRANGE Aftermarket-Program
15
Octane Booster An environmentally friendly function improver for increasing the octane number.
Art. No. 5861 103 300 = 300 ml Properties • Increases the octane number – by 3–8 points depending on the original fuel quality • Prevents attrition on valve seats and exit valves and therefore increases the service life of the whole fuel system • Protects against pinking, knocking and retrospective ignition by the engine • Increases the engine performance
Areas of application / use • In case of only poor quality fuel being available – for example for journeys made in foreign countries • Where there are engine noises occurring such as pinking or knocking • For increasing the power output of vehicles in the high performance range
Application / dosage Add the function improver directly to the fuel.
16
FuELRANGE Aftermarket-Program
Information Designation Octane Booster
Contents Art. No. 300 ml 5861 103 300
P.Qty. 12
Air Intake and Throttle Valve Cleaner A special, highly active system cleaner for 2 and 4-stroke engines.
Art. No. 5861 113 500 = 500 ml Properties • Improves the fuel flow • Reduces the fuel consumption • A smoother running engine • Improvement of the engine performance • An excellent cleaning performance through use of special surface activity • An optimal carburettor performance • Detaches and removes the most stubborn deposits • A fault-free throttle flap function • A 360°valve system • Difficult to access locations are not a problem at all • Can be sprayed from any position • Suitable for use with engines with catalytic converters
Properties
Information Designation
Contents Art. No. 5861 113 500
Air Intake And Throttle Valve Cleaner 500 ml
P.Qty. 12
A highly active system cleaner for removing dirt and deposits in the air intake and throttle flap area without disassembly work, as well as for calibrated bores and nozzles. Has an excellent removal power combating oil, grease, rubber, resin and paint residues.
Areas of application / use Spray strongly onto the parts to be cleaned with a
Note If there are various throttle flap units it is advantageous to remove those in order to be able to clean the underside of the throttle flop optimally. Only suitable for use on petrol engines! Clean diesel injection nozzles only in a removed condition.
stationary engine and allow the active agent to work for 2–3 minutes. Subsequently spray for 30 seconds with a running engine into the air intake and/or throttle flap area and increase the engine speed slightly while doing this in order to burn off the released deposits.
FuELRANGE Aftermarket-Program
17
LPG Treatment A specially developed fuel function improver for gaspropelled vehicles.
Art. No. 5861 200 300 Properties • Achieves long-term stability of the fuel • Prevents build-up of long-chain oxidation products • Protects against corrosion • Prevents accumulation of resins and foam in the evaporator • Reduces wear on valves and valve seats
Areas of application / use An function improver package to apply in liquefied petroleum gas and natural gas vehicles (LPG and CNG). Can also be used for final customers in cases of fouling of the fuel system or for longer periods of standing unused.
Properties A combination of anti-oxidants and anti-corrosion protective agents. Contains a cleaning function improver to keep the fuel system clean. Contains a function improver for reducing valve attrition.
Application 300 ml for one tank filling.
18
FuELRANGE Aftermarket-Program
Information Designation LPG Treatment
Contents Art. No. 300 ml 5861 200 300
P.Qty. 12
Engine Oil Treatment → An optimised formulation Cleaning and protection for all petrol and diesel engines.
Art. No. 5861 300 300 = 300 ml Properties • A modern formulation with low amounts of ash and sulphur • Minimises the friction resistance and attrition • Also compatible with modern engines • Protects against corrosion, oil sludge and blocked oil ducts • Leads to an even compression pressure • Protects valves against burning out and creates a secure valve seat • Increases the service life of the engine • Releases piston rings covered in resin and cleans the oil circuit up to the piston ring zone • Supplements the used engine oil agents • Neutralises aggressive combustion acids • Is conform with the modern API standards for engine oils
Areas of application / use • For every engine repair • For every oil change inspection • For diagnosis of oil sludge • Suitable for all petrol and diesel engines with and without a turbocharger, with or without a catalytic converter • Suitable for all engine oils manufactured on a
Information Designation Engine Oil Treatment
Contents Art. No. 300 ml 5861 300 300
P.Qty. 12
Application Add content of can to the engine oil.
Dosage 300 ml is sufficient for 4.5 litres of engine oil. 1'000 ml is sufficient for 10 litres of engine oil. The ideal amount to add is 10%. Reduce the amount of fresh oil according to the oil level.
mineral and synthetic oil basis • In case of thinning of oil through use of biofuels
FuELRANGE Aftermarket-Program
19
Engine Flush & Cleaner A cleaner for petrol and diesel engines, with and without a catalytic converter.
Art. No. 5861 312 400 = 400 ml Properties • A newly developed concentrate of agents • The fresh oil remains effective and cleans for longer • Removes dirt and sludge deposits in the interior of the engine • The dirt is effectively removed when draining off the old oil • Contains a high cleaning action active tenside • Cleans and flushes out the whole engine oil circuit
Areas of application / use • When there is suspicion of the formation of black sludge • For hydraulic tappet flaps • In case of a late oil change • In case of loss of compression in the area of the piston rings • For all engine oils made on a mineral and a synthetic oil basis. • For dirty engines and old oils
Information Designation Engine Flush & Cleaner Engine Flush & Cleaner
Contents Art. No. 400 ml 5861 312 400 1000 ml 5861 312 001
P.Qty. 12 12
Dosage A 400 ml can is sufficient for up to a 5 Litres oil fill.
Application Add the content to the warm engine oil before changing the oil. The oil level must be over the minimum. Allow the engine to run for some minutes; allow 10 minutes to get the maximum effect. Perform the oil and filter change immediately afterwards.
20
FuELRANGE Aftermarket-Program
1'000 ml 10 to 15 liters of oil. Overdosing will not cause any damage.
Transmission Treatment Manual Permanent protection for manual gearboxes of all kinds.
Art. No. 5861 400 125 = 125 ml Properties • A high performance lubricant with the highly effective organic molybdenum compound OMC2 • Optimal surface flattening due to thermoplastic flow deformation • Reduces and minimises the material attrition • Rehabilitates already attacked surfaces • Removes noise emissions • Stabilises the viscosity of gearbox oil • Secures an optimal gearbox function • Protects the manual gearbox in the long-term from the highest thermal and dynamic loads • Delays ageing of the oil and protects against corrosion • Increases the service life of the manual gearbox • A concentrate of agents made according to the international specification MIL-L-2105 for the highest pressure loads
Areas of application / use • When gearbox noises occur • With difficulties shifting gears • To be used as a preventive at every gearbox oil change and for gearbox repairs • Suitable for gearbox oils manufactured on a mineral and a synthetic basis Note: not suitable for poly glycol oils
Information Designation Contents Art. No. Transmission Treatment Manual 125 ml 5861 400 125
P.Qty. 12
Application Screw on the filling hose and add the content of the can to the gear oil by tipping the valve • Enables optimal handling even for locations difficult to reach
Dosage The proportion of the gearbox function improver must be a maximum of 10% of the total volume of the gear oil. The content of the can is sufficient to treat 2.5 litres of gear oil.
FuELRANGE Aftermarket-Program
21
Auto Transmission Flush For cleaning automatic gearboxes.
Art. No. 5861 410 150 = 150 ml Properties • Contains a high cleaning action active tenside • Cleans and flushes out the automatic gearbox circuit • Ensures an optimal switching function • Does not damage any seals and other materials in the engine • No additional load on the environment • Residual amounts of the old gearbox fluid are not dangerous to the system
Areas of application / use Automatic Transmission Flushing is a highly active cleaner used to remove deposits and residues in an automatic gearbox and to guarantee an optimal switching function which extends the service life of the gearbox.
Application Add the content of the can to the gear oil at its operating temperature before changing the automatic oil. Run the engine for about 10 minutes with the vehicle stationary and perform a shift through all gearstick positions at least twice.
Dosage 150 ml is sufficient for 3 to 6 litres of oil. Follow the instructions provided by the device manufacturer.
22
FuELRANGE Aftermarket-Program
Information Designation Auto Transmission Flush
Contents Art. No. 150 ml 5861 410 150
P.Qty. 12
Auto Transmission Treatment To protect automatic gearboxes.
Art. No. 5861 401 150 = 150 ml Properties • Compatible with all oils used in automatic gearboxes • Excellent lubrication, also directly after the start • Protects all gearbox components against attrition • Maintains the temperature in the optimal operating condition and extends the service life of the gearbox • Stops building up of foam in the gearbox • Improves the quality of the gear shifting • Equivalent to the GM DEXRON® III, MECRON® and Mercedes Benz specification • Improves gear shifting at low external temperatures
Areas of application / use • For every change of the oil in an automatic gearbox • If the quality of the gear shift deteriorates • In order to improve the service life of the oil in an automatic gearbox • In order to stop oil losses due to leaks
Information Designation Auto Transmission Treatment
Contents Art. No. 150 ml 5861 401 150
P.Qty. 12
Application / dosage Add the content of the can to an automatic gearbox; avoid overfilling.
FuELRANGE Aftermarket-Program
23
Radiator Seal HP A high performance cooling system securing aid for all modern vehicle types with a transverse current cooling system.
Art. No. 5861 500 150 = 150 ml Properties • Seals leaks up to a maximum of 0.1 mm in areas around cylinder head seals and hose connections • Dirt strainers in the cooling circuit are not blocked up • Avoids seal sweating and removes evaporation losses on heat exchangers, heating valves, radiators and additional equipment • Increases the operating security and protects against engine damage caused by coolant losses • The product remains totally effective up to the next anti-freeze protection change in the system • A sealing effect achieved by microscopically fine, synthetic particles
Areas of application / use • In case of microscopic leaks on the cylinder head
Information Designation Radiator Seal HP
Contents Art. No. 150 ml 5861 500 150
P.Qty. 12
seal and the hose connections • In case of evaporation losses on aggregates in the cooling system • As a preventive measure for every anti-freeze protection change • Can also be used in sealed cooling systems • Suitable for all conventional anti-freeze protection and coolants • Caution: Conventional radiator sealants must not be used in modern transverse current cooling systems since they will cause blocking of the strainer which can lead to failure of the radiator and therefore engine damage. 24
FuELRANGE Aftermarket-Program
Application Pour directly into the cooling circuit when the engine is warm. Only pour into the coolant expansion reservoir if this has coolant flowing through. Then allow the engine to run for at least 10 minutes until the thermostat opens and the heating gives out a noticeable amount of heat. Turn off the engine, check the coolant again and top it up if necessary.
Dosage Sufficient for 10 litres of coolant.
Radiator Seal Cooling system securing for all engines with an old style of cooling system without a dirt strainer
Art. No. 5861 501 300 = 300 ml Properties • A sealing effect due to organic particles • Does not attack rubber, plastics, light metal and nonferrous metals • Seals hairline cracks and small leaks permanently and secures the cooling circuit and combustion chamber from developing leaks • Secures the functionality of the water pump and heating system aggregates • Avoids coolant loss • Increases the operating security and protects against engine damage caused by coolant loss
Areas of application / use • In case of hairline cracks in the radiator, engine block or cylinder head • In case of leaky hose connections
Information Designation Radiator Seal
Contents Art. No. 300 ml 5861 501 300
P.Qty. 12
• In case of defective head seals • Mixable with all commercially available anti-freeze agents and coolants • Caution: It is not allowed to use a radiator sealant if there is a dirt strainer in the
Dosage Sufficient for up to 10 litres of coolant. In the goods vehicle area mixing ratio of a maximum of 1:100.
cooling system
Application Shake the can well before use. Add the content of the can to the warm cooling system. Open the heating valves and allow the engine to run for at least 10 minutes. Check the coolant level and sealing again.
FuELRANGE Aftermarket-Program
25
Radiator Cleaner and Conditioner Suitable for all engines to solve the problem of a reduced cooling performance for radiator repairs and maintenance work on the cooling system.
Art. No. 5861 510 250= 250 ml Properties • Alkali in the (pH) range 9–11 • Not aggressive towards plastics, rubber and metals • Removes corrosion and sludge deposits in the cooling circuit • Increased operating security because of a cleaned and clean cooling system • Neutralises calcium residues • The new coolant is protected from fouling by the old dirt residues • A highly effective tenside mixture, compatible with anti freeze agent • Removes and binds oil and grease-containing residues
Areas of application / use • In case of fouling of the cooling system after engine
Information Designation Radiator Cleaner And Conditioner Radiator Cleaner And Conditioner
Contents Art. No. 250 ml 5861 510 250 1000 ml 5861 510 001
P.Qty. 12 12
repairs such as oil residues in the cooling system due to cylinder head damage
attacked by oil entering their area such as the coolant
• In case of deposits in the cooling circuit
expansion reservoir and water hoses. After cleaning
• Usable as a preventive measure for every change of
the cooling system fill it up again, vent air and check for
coolant
leaktightness.
Application
Dosage
Add content of can to the coolant. Open the heating
250 ml is adequate for 10 litres of coolant, 1'000 ml is
valves. Allow the engine to run at operating temperature
adequate for 40 litres of coolant.
for about 30 minutes. The deposits released by the coolant cleaner necessarily need to be flushed away. The flushing process takes place without removing the thermostat. It is recommended to replace parts 26
FuELRANGE Aftermarket-Program
Notes
FuELRANGE Aftermarket-Program
27
Power spectrum of fuel function imp Petrol Treatment
Lead Substitute
Octane Booster
Petrol Injection Cleaner
Cleaning
▯▯
▯▯▯
Corrosion protection
▯▯
▯
Lubrication improver ▯▯▯
Lead substitute Ageing protection Acceleration improvement
▯▯
Long term protection 2000 km
▯▯
Duration application Problem solver
▯▯▯
▯
▯▯▯
▯
▯▯▯
▯▯▯
▯
▯
▯▯▯
Winter Diesel Treatment
Diesel Stabiliser
▯ Diesel Treatment AR
Diesel Injection Cleaner
Cleaning
▯
▯▯
Corrosion protection
▯
▯▯▯
Ageing protection
▯
▯▯
▯▯
▯▯
▯▯▯
▯
▯▯
▯▯
Cetane number conditioner Carbon black combustion elerator
Lubrication improver Acceleration improvement
▯▯▯
Drag reducer ▯▯
Long term protection 2000 km Duration application
▯▯▯
▯▯▯
▯▯▯
Problem solver
▯▯▯
▯
▯
Bacterium protection
28
▯▯
FuELRANGE Aftermarket-Program
▯▯▯ ▯▯▯
improvers Petrol System Cleaner
Air Intake And Throttle Valve Cleaner
▯▯▯
▯▯▯
▯
▯▯▯
▯▯▯
Cetane Booster
Diesel Particulate Filter Cleaner
Diesel Combustion Chamber Cleaner
Diesel System Cleaner
▯▯▯
▯▯▯
▯▯▯
▯ ▯ ▯▯▯
▯
▯ ▯▯▯
▯ ▯▯▯ ▯
▯ ▯▯▯
▯▯▯
▯▯▯
FuELRANGE Aftermarket-Program
29
TÜV - Certificates TÜV Thüringen The German Technical Inspection Agency (TÜV) Thüringen is responsible for technical security inspections, especially for compulsory requirements by public laws. The covered brand “TÜV” has high brand awareness and conduces to a seal of quality for the tested products. Elected Würth fuel and oil function improver were checked by TÜV Thüringen and passed successfully the tests. The effectiveness was attested holistically and the products were released and certified.
Data / calculations In an older vehicle use of function improvers can lead to average savings on fuel of about 3%. Therefore with a consumption of 8 litres/100 km, 2.4 litres every 1'000 km can be saved. It is not only petrol which is saved but also CO2. 1 litre of petrol produces 2.33 kg of CO2 and 1 litre of diesel produces 2.64 kg of CO2. Over a distance of 1'000 km for vehicles running on petrol this means a saving on CO2 emission of about 7 kg. Furthermore use of function improvers increases the service life of the fuel system and the individual parts. For example a set of new injectors cost a few hundreds of Euros while a new particulate filter costs at least 1'000 Euro. Use of function improvers has a preventative effect to prevent such damage occurring.
30
FuELRANGE Aftermarket-Program
Environmental protection Environmental protection means already thinking today about tomorrow. Würth as a global player, market and innovation leader in the range of assembly technology is fully aware of the responsibility and adduces as an instance. Also the Würth fuel and function improver program has been designed to meet the demands of tomorrow. That means: Function improvers make a major contribution to reduce pollutant emissions and to make savings in fuel and oil where the packaging was exclusively chosen to be recyclable containers. Tin plate packagings have a recycling quote of over 89% since they can easily be separated from other waste due to their magnetic property. After appropriate further processing the tin plate waste passes on again to the manufacturing processes for steel. Every kilogram of reused tin plate saves two kilograms of CO2 emissions. Within a year it is possible to save 4.7 million tonnes of CO2, as much as a large city in Germany with a population in excess of 400'000. This all shows that environmental protection is an active acknowledgement to take responsibility to protect our planet – today as well as tomorrow.
FuELRANGE Aftermarket-Program
31
FuELRANGE Aftermarket-Program
Würth – your partner for automotive repair and refinishing trade
Würth International AG CH-7004 Chur T +41 (0)81 558 00 00 F +41 (0)81 558 10 00 info@wurth-international.com www.wurth-international.com
© by Würth International AG Printed in Switzerland All rights reserved Responsible for the content: Melanie Pagano Editorial office: Melanie Pagano
Reproduction only with permission. We reserve the right to modify products anytime, which are in our opinion an improvement, without any advance notice or message. Illustrations can be an example, which can differ in appearance to the delivered good. We reserve errors, we do not acceptance of responsibility for misprints. The general terms and conditions are valid.
World market leader in the trade with connecting materials The Würth Group is world market leader in the trade in assembly and fastening material. Würth currently counts 410 companies in 84 countries and employs over 66'000 people worldwide. According to the preliminary annual statement of 2011, the Würth Group generated a sales turnover of 9.7 billions.