
















Flush pull
MTH2103-15-023
Brass Satin( Non-coated ) DT 16mm or above
Lever handle
MUL2101-15-023
Lever handle + Lock case
MUL2101-15-023 + PRE-HS2
Brass Satin( Non-coated ) DT 33-40mm
Sliding door lock
Indicator lock( for lever handle )
PRE-W173-04
Lever handle + Indicator lock + Lock case
MUL2101-15-023 + PRE-HS2 + PRE-W173-04
Brass Satin( Non-coated ) DT 33-40mm
Door knob
MUL2102-15-023
Door knob + Lock case
MUL2102-15-023 + MFS01001
Brass Satin( Non-coated ) DT 33-40mm
φ56 122.5 P=34 φ35 6 P=25 φ35 22.5 P=25 φ 60
φ56 P=34
8.5
MUK2104-15-023
53 25
Brass Satin( Non-coated ) DT 33-40mm
Paper holder
MPH2109-15-023
Brass Satin( Non-coated ) Load limit 3kg
Towel holder MTR2110-15-023 Brass Satin( Non-coated ) Load limit 3kg
P=24
Cabinet knob MTH2108-15-023
※ Cautions about mounting and handling
28
13.5 40
32 □40 2 2
134 120 1.5 12
112
Brass Satin( Non-coated ) Hook( triple type ) MTH2107-15-023
32.5 8 33
“Lamoe” brass products are delivered without any coating in order that the natural process of aging and change may be enjoyed.
An anticorrosive agent is applied to delay the progress of coloration up until the product can be delivered, however there will always be individual differences in effect and, depending on the product, there may be a difference in color.
5 45 60.5 8.5 33.1
5 60 5 10 40 10 P=184 200
P=24 80
Brass Satin( Non-coated ) Load limit 3kg per hook Hook( with base plate ) MTH2106-15-023
17.5
25
40 48.5 550 200 200
As the effect of the inhibitors wears off, aging starts and in the early stages discoloration unevenness and fingerprint marks may occur. Touching the product with repeated use, however, will cause the color to darken more evenly overall.
If splashed with water, droplets may leave a stain. If used in a humid place, green blue tarnishing may occur. If it is concern, simply wipe with brass polishing cloth.
※ Please refer to the “Lamoe” website for brass cleaning methods.
Brass Satin( Non-coated ) Load limit 3kg Hook( without base plate ) MTH2105-15-023
45 5 40 40
※ Cautions about mounting and handling (Paper holder / Towel holder)
When installing with the attached brass minus screw, be sure to first punch a starter hole in the wall. Brass is a soft metal, so appropriate care is necessary when using a minus screwdriver. Installation will be smooth if the starter hole is the same diameter as the brass screw (4φ).
5 40 40 10
60 10 5
φ20 P=24 300 P=284
25 48.5 17.5 40 25
25 41 1 2.5


