0121 711 2760 • www.buildingsolutionsuk.co.uk
Issue 817 • August 2016
The Sigma rainwater harvesting unit from WISY® AG
Inside this issue Gripple
Commitment to Excellence See them on page.....................3
Clarity Glass Repairs
Commitment to Excellence See them on page.....................4
Sign of the Times
Commitment to Excellence See them on page.....................5
K-Rend
Commitment to Excellence See them on page................. 4-5
Romanhaus
Commitment to Excellence See them on page.....................6
The Sigma rainwater harvesting unit from WISY® AG is extremely versatile and is suitable for most domestic installations, both for new properties and also for retro-fitting into an existing one. It is also ideal for use with above ground tanks, as the pump is located within the unit that sits inside the house so is not vulnerable to frost.
• Innovative
new SuDS system
• Ultra
low discharge SuDS device
• Peak
The neat and compact design houses an exceptionally quiet pump, advanced Zeta control unit and a small cistern for the backup from the mains water supply.
• Simple
Mains water back-up is achieved via a small break tank built into the Sigma unit. This mini break tank accepts the mains water supply and provides the required statutory air gap to prevent the cross contamination of mains water supply. As of April 2016, all Sigma units are WRAS Approved, one of very few such products to obtain this distinction.
discharge as low as 0.05 Litres/sec per plot to install, very low maintenance.
Please visit www.suds-solutions.co.uk
HWL Windows
Doors, Windows & Lighting News See them on page.....................8
J0800 074 7234 m info@suds-solutions.co.uk
Having the mains water supply go to the pumping unit rather than to the main storage tank has certain advantages, particularly where used with an above ground storage tank. The
system can be switched to run from the mains supply only should you wish and is extremely quiet in operation. The award winning Zeta control unit has a remarkably low standby power consumption of only 0.2 watt. With most pump controllers having a permanent power consumption of 8 watts or more, this represents an excellent cost saving as well as a significant CO2 reduction. Contact T +44 (0)1452 772000 sales@rhsl.co.uk www.rainharvesting.co.uk
Bifold Group
Doors, Windows & Lighting News See them on page.....................8
Drainfast
Drainage News See them on page.................. 11
Granite Setts
Granite Solution News See them on page.............12-13
Lee Sanitation
Sanitation News See them on page.................. 16
Andel
Flood Defence News See them on page.................. 21
www.facebook.com/solutionsuknews
and follow us on Twitter
@S4I_UK
Commitment to Excellence
CORDURA® fabrics Celebrate Future Designers, Project 2020 Contest The CORDURA® brand team celebrated at the Professional Clothing Awards June 22nd by recognizing leading fashion and textile design students who took part in the Project 20/20 Student Design Awards 2016 competition. Four UK students – James Parker, Bethany Martin, Mollie Crabtree, and Lauren Jones – were named as Project 20/20 finalists as part of the special awards event at Excel, London for their creative, futuristic professional workwear designs.
team. They were extremely helpful in bringing my vision to life. I had to overcome a lot of technical issues whilst pattern cutting the design, and I gained new understandings of working with tech fabrics.”
The Student Design Awards sponsored by CORDURA® fabric, empower young designers to create their own visions of professional work clothing. This year’s program, Project 20/20, challenged student designers to conceptualize corporatewear, workwear and/or personal protective equipment (PPE) for workers in the year 2020. The CORDURA® brand team encouraged students to go a step further with its CORDURA® Durable Design Award that focused on the integration of technical fabric functionality and commercial viability within design entries.
“This project has stretched my technical skills and has been thoroughly enjoyable and very rewarding,” said Martin. “After designing outerwear for the competition, I feel this is something I want to expand on. I definitely hope to experiment with designing outerwear and sportswear in my final year at university, with a view to create garments that are stylish, practical and exciting for active and adventurous individuals.”
“The CORDURA® brand is focused on pushing the boundaries of durable fabric innovation,” says Cindy McNaull, global CORDURA® brand and marketing director. “Today’s young designers are essential in
CORDURA® Durable Design Award Winner: Bethany Martin, 2nd year, Hons in Fashion, University of Northampton. Garment range for Professionals working in the Outdoor Environment.
bringing forward-thinking designs to life, and helping us construct the durable fabrics of tomorrow. We’re pleased to see all of the futuristic workwear garment innovations from this year’s competition and to have the chance to celebrate the textile industry up and coming design leaders.” Overall Winner: James Parker, 3rd year, Fashion Design and Business Studies at Brighton University. Garments designed for Arborists/Tree surgeons. “My Project 20/20 experience has been a fantastic learning curve,” said Parker. “I had such amazing support from the PCA Staff and CORDURA® brand
Innovative Cable & Asset Management Cable Trail are not only a supplier of products but also a developer of solutions. This year alone, we have added three new products based on customer requirements. We operate in a very diverse range of industry sectors such as Aerospace, Construction and Event management. Because of this diversity we need to be able to provide adaptive cable management solutions, from a basic hook system to a fully managed, RFID controlled system for areas that require maintenance tracking to ensure legislative compliance. Legislative compliance drives the add on products such as the LV-Tag used to identify a specific product or location.
We try to ensure all our products are able to be used in extreme environments such as our Cable protection ramps that can withstand extreme loads up to 44 Tons and our Identification products that are approved to be used in potentially explosive areas such as Oil and Gas. Contact T +44 (0)1423 209010 enquires@cabletrail.com www.cabletrail.com
Garments from the Project 20/20 winners and semi-finalists were displayed at the Safety & Health Expo, ExCel London and showcased in a special catwalk live show. For more information about the Project 2020 contest and our workwear of the future: http://www.cordura. com/en/fashionxfunction/project_20-20.html
Building for the Automated Life With AB Audio Visual, every project is a unique opportunity to make your client’s dreams a reality. With details of design and function added to enhance your client’s lifestyle, the final result is a place your clients can’t wait to call ‘home.’ We use Control4 automation solutions which are designed to make homes more comfortable, more energy efficient and more secure – complementing your home designs with personalised features and experiences that transform a dream home into a dream way of living. Set yourself apart and appeal to a more informed, techsavvy homebuyer by integrating home automation technology into your projects. Automated homes are among the top amenities that consumers aspire to in modern homes today. As a leader in home automation, AB Audio Visual and Control4 are the partner of choice with truly personalised and flexible automation solutions to meet every budget. Homeowners can start with one room or solution, with plans to add more over time. Or they can choose to have a fully featured, whole-home automation system right from the start. We work directly with builders and homeowners to design entry-level systems that are right for every project. Additionally, we can provide pre-wired options to ensure a home is ready for virtually anything your client may want, now or in the future. Delight your client with a home that dramatically
simplifies life – where virtually every device and system in the home can be fully automated and even controlled remotely. Control the home theatre, dim the lights, lock the doors, turn up the heat and arm the alarm – all from one easy-touse interface. We will work directly with you to design an automation solution that’s perfect for every project. AV control gives users simplified control of complex audio visual systems. By using either push button panels or touch screens, a single
Cable Management Innovation Cabletrail is an innovative, patent protected product that can be positioned vertically, at an angle or even horizontally to work within all sites, ensuring that cables are securely fixed. Cables can be guided round corners and individually managed for easy identification, as well as being segregated by contractor or cable type to speed up breakdown and setup.
Please contact: 01423 209010, email: enquiries@cabletrail.com or visit: www.cabletrail.co.uk
2
is sponsored by Gripple | please turn to page 3
button press can simultaneously lower the projection screen, switch on the projector and DVD player, select the correct setting on the audio system, close the window blinds and dim the lights. These control systems can also integrate with heating and lighting, access control, intercom and communications. Contact T +44 (0)1945 476973 sales@abaudiovisual.co.uk www.abaudiovisual.co.uk
Commitment to Excellence
Over 25 Years of Industry Excellence Building Solutions UK is extremely proud to present Gripple with its highly prestigious and richly deserved Commitment to Excellence profile due to their continued success in the industry and dedication to fulfil customer needs. Founded in 1988, the manufacturing company has become a renowned name in the industry for its quality manufacture of wire joiner and tensioners. Its establishment is courtesy of wire salesman Hugh Facey, who discovered a gap in the market for such products and decided to set up his own business in response to this. Back in 1985, the promising entrepreneur found himself on a wet hillside in Wales listening to the anguish of a frustrated farmer who was becoming increasingly agitated with the traditional methods of joining fence wires. Finding bending and knotting to be cumbersome and tedious processes, it seemed a better way to connect two pieces of wire was much needed, and upon discussing this matter Hugh became convinced he could develop a stronger alternative. It was during this time when the concept of a Gripple fastener was born. Influenced by a local farmer erecting a field fence through the means of knotting horizontal line wires together, Hugh came up with an idea of a small ‘widget’ that – along with the incorporation of spring loaded steel balls – would do the job most effectively. Three years and many development
added potential to minimise costly shortage or waste. Gripple’s Catherine King was keen to tell us more about the key advantages of utilising Gripple innovations, “Our products offer a range of benefits including; up to 97% reduction in embodied carbon; 95% reduction in weight; up to 84% quicker to install; and a reduction in combined labour and materials cost of up to 70%,” she enthused. “They are also more aesthetically pleasing compared to Rod and Chain. We export 85% of our products and have offices and manufacturing facilities in Chicago, France, India, and three sites in Sheffield, where most products are manufactured in full.” phases and test trials later, a viable prototype was launched commercially and Gripple was formed – a brand name combining the words ‘Grip’ and ‘Pull.’ Decades of progression passed, allowing Gripple’s offerings to become popularised across a range of industries. Its dedicated construction product ranges are available for M&E, HVAC, lighting, signage and acoustic panel applications and have
Flexidisc Sander
Flexidisc is a system based on an exciting 5” (125 mm) disc sander attachment which fits in your drill, and does not jump, skitter or scuff. This is due to a simple but highly efficient flexible shaft which eliminates vibration. It gives full control without the need for effort or expertise when presented full face to the job surface. A top quality result is assured. With prices starting from ONLY £28 for a starter kit!
Visit our website for more information and to buy yours now!
www.letonkinoisvarnish.co.uk
T +44 (0)114 275 2255 info@gripple.com www.gripple.co.uk
The Flexidisc Sanding system has been sold in the UK by DA & BE Murkin for almost 30 years, but it still remains one of the most versatile sanders on the market.
So what is Flexidisc?
And the whole system can be carried in your coat pocket!
The Sheffield-based business now houses a special facility for its own Ideas & Innovation team, which was put into place to bring ideas to fruition in a world class setting. Also provided is a Drawing Take off Service, which allows clients to receive the best product suitable for their individual needs with the
If you would like any more information about Gripple and its range of civil construction, building services, viticulture, orchards & fencing and seismic & force protection products, then please use the contact details supplied below.
Achieve a refined finish with Le Tonkinois Varnish
B&D Murkin
In short it’s whatever you need from the following: • In its basic state, it’s a general sander, but converts in seconds to: • A super-fine finishing sander • A bench grinder • A general purpose sharpener • A partial angle grinder • A polish applicator • A polisher • It also grinds glass and nails.
proven to be incredibly valuable whilst utilised in agriculture, construction, civil engineering and seismic environments.
Starter Kit
The Flexidisc is a system based on an exciting 5” (125mm) disc sander attachment which fits in your drill, and does not jump, skitter or scuff. This is due to a simple but highly efficient flexible shaft which eliminates vibration. It gives full control without the need for effort or expertise when presented full face to the job surface. This system accomplishes fantastic finishes on all hard materials including wood, metal, glass, fibreglass and car body filler. Fast rotation allows this quality process to be completed in a fraction of the time normally taken by conventional sanders. Although a generic sander in its basic
is sponsored by K-Rend | please turn to page 4-5
form, the multi-purpose tool can convert within seconds to become a super-fine finishing sander, bench grinder, sharpener, partial angle grinder, polish applicator and polisher – all of this within a small device that can be carried conveniently in your pocket! Flexidisc uses ‘slap-on peeloff ’ Velcro type discs which are coated with a super-tough material called Corundum, (close to diamond for hardness). Re-usable and cleanable, these discs will do the work of at least 100 conventional discs and are able to comfortably cope with a wide range of materials from soft plaster to iron and steel, including slate, concrete and marble. Contact Brian Murkin: T +44 (0)1628 629892 T +44 (0)1628 548840 mail@letonkinoisvarnish.uk www.letonkinoisvarnish.uk
3
Commitment to Excellence
Your Glass Solution is Clear Building Solutions UK is extremely proud to present Clarity Glass Repairs with its highly prestigious and industry acclaimed Commitment to Excellence profile. With years of experience in repairing damaged or scratched glass, Clarity Glass Repairs’ skilled and dedicated technicians are able to repair all types of damage to glass. Satisfying the needs of customers in retail, construction, commercial and residential, the company provides reactive, preventative and planned maintenance services on interior and exterior glass. The sole purpose for installing glass is to provide the ability to see through it. However if glass is damaged through general wear and tear, accidental scratching or through
malicious scratched graffiti damage, this can detract from its original purpose and the original clarity of vision is disrupted and lost.
used to carefully grind the glass flat to the depth of the scratch whilst feathering the area to ensure the glass is restored back to its original clarity. The cloudiness that occurs as a consequence of grinding is then finely polished out using cerium oxide compound to restore the glass surface to its maximum clarity.
Clarity Glass understands that first impressions matter and that scratched glass, etched graffiti tags, stains and mineral deposits all detract from the general appearance and appeal of your premises, whether it is a customer looking in your shop window, a client visiting you at your business premises or a guest looking at the view out of their hotel room. Therefore, the company offer a comprehensive service that is cost-effective, convenient and an easy way to keep your glass looking fresh and new.
the time to determine the type of glass about to be worked on, whether it has any flaws, small scratches and cracks, especially at its edges, and carries out a close inspection of the area to be repaired.
When repairing scratched glass, Clarity takes
Varying grades of flat abrasive pads are then
Estimating Software for the Building Industry
There are many ways in which glass can become stained, discoloured or hazy. Rain water flowing over the façade of a building can pick up traffic grime and minerals from concrete, mortar or stone and carry these contaminants onto the surface of the glass. As standard cleaning products do not work, the company use modern glass polishing techniques that can get the glass back to its original clarity. If your glass has been damaged by this, Clarity can restore it saving
Insulation & Damp Proofing News
Easy Price Pro has been granted with our highly respectable Commitment to Excellence profile, we are pleased to announce at Building Solutions UK. Designed for builders by a builder, it is no surprise that Easy Price Pro has become such a success, having secured status as the prestigious provider of the UK’s No.1 construction estimating software. The business was developed by current Managing Director Paul Betts, who become increasingly frustrated with how much time was being wasted on establishing estimates and quotations and subsequently set out to find an appropriate solution. Upon discovering there was no easy program designed to address these issues, Paul made the informed decision to create his own estimating resource that would increase efficiency within the workplace. The great functionality and usability of the unique tool become remarkably apparent, and after 12 years of significant investment Paul launched Easy Price Pro along with his dedicated development team. Serving the building and construction industry, the focused enterprise provides specialist software systems that enable builders and tradesmen to operate more productively. Laid out in a logical format – in the order works are carried out – the award-winning range comes with a whole host of operational benefits. Not only will individuals be able to cut their time estimating by up to 80%, they will also be able to produce conclusive reports which can be accessed either on-site or in the office (courtesy of the advanced Cloud solution). Designed purposefully to price new builds, the Easy Price Pro program saves time, improves accuracy and encourages companies to attain more jobs with the completion of well organised projects. The organisation’s Head of Marketing, Rachel Betts, told us more, “At Easy Price Pro, we know what you want…a quicker,
easier and less stressful way of producing estimates. “Unlike our competitors, our programmes were developed by a builder who truly knows exactly what builders and tradesmen need. We have always been the first in the market; our aim is to continue to stay ahead of the game and we are currently working on new projects in order to enhance customer experience and help businesses to run as smoothly and efficiently as possible.” The latest addition to the portfolio is the new Job Analyser program. Working in accordance with existing systems, this particular innovation evaluates all jobs completed over the year (or a chosen period); taking into consideration both accepted and declined quotes, pending jobs and the value of each. This acts as a comprehensive and convenient tool providing companies with updated and accurate accounts of their performance, outlining where they have been most successful. Easy Price Pro has extended its product offering following the popularity of its original software bundles (namely the Extensions Estimator and New Houses). The team are now able to reach out to other trades in need of estimate assistance; guiding electricians, plumbers, roofers, bricklayers, ground workers and many more industry professionals. Paul also made it a priority to expand the programs EPP produced to cover management programs (such as Health and Safety Plus, Easy Builders Contract and ScheduleIT) in response to customer feedback. Please contact Easy Price Pro today to find out how you can enhance the estimating process at your place of work with these exceptional software packages tailor-made to suit your particular business needs. T +44 (0)3333 321502 info@easypricepro.com www.easypricepro.com
4
is sponsored by Gripple | please turn to page 3
you up to 80% of the potential costs of the replacement units. As well as saving you time and money and providing a more convenient service, repairing scratched and mineral damaged glass rather than replacing it also benefits the environment. In today’s environmentally conscious marketplace companies are constantly looking for ways to reduce their carbon footprint. Repairing glass is just one change that companies can make to become more sustainable without affecting their business practices or breaking the bank. For more information on Clarity Glass and how they can help you, contact on: 0800 772 0194 or visit the website at: www.clarityglassrepairs.co.uk
Commitment to Excellence
Quality Cast Signs The exceptional organisation Signs of the Times (SOTT) has been awarded with our highly regarded Commitment to Excellence profile, we are pleased to announce here at Building Solutions UK.
show-house signs, street name plates, directory systems & orientation boards, commemorative (including blue plaques) & informative plaques, heraldic devices & ceremonial coats of arms, company logos, country signs & footpath way markers, urban walking signs, golf club signage, corporate roundabout markers, presentation plaques, scholastic & ecclesiastical signs, wall mounted & suspended signs, fingerposts & post mounted directional signs and, as previously mentioned, individual letters in various materials, sizes and typeface.
The reputable bespoke castings and design expert was established in 1984 by David Dokk-Olsen, who had a deeprooted interest in cast iron foundries and subsequently wanted to set up his own business involved in the manufacture of these robust signs. The company, which is based in Bedfordshire, is made up of 12 people who collectively share more than 150 years of industry experience and are well placed to serve the needs of customers across various industries (domestic and commercial applications included). This flexibility comes courtesy of the organisation’s widereaching product offering. Having diversified from simply creating house signs to producing a comprehensive range of signage and decorative panels, SOTT is a specialist designer, manufacturer and supplier facilitating the demanding requirements of builders, architects, councils and schools with an unparalleled level of expertise and excellence. “All of our signs are bespoke and made in-house by skilled pattern makers and artists,” commented Sue Elwes, Business Development Manager at Signs of the Times. “Clients are
therefore encouraged to discuss their requirements fully – we even welcome customers to come to our workshop, as this will enable them to talk through any design ideas with greater ease. We assist and advise where appropriate, incorporating site logos to match the project, and we can supply noticeboard cabinets and lecterns with information panels and artwork services for panels and estate maps.”
business. The group now boast a large stock of popular mail boxes; an array of designs including traditional European style items and anti-arson prototypes for flats and offices. As well as original cast polyurethane signs, cast bronze, aluminium and Glass Reinforced Plastic (GRP) options are available, and brass, bronze, slate, granite and Perspex cast and cut-out letters can be engraved as appropriate to match any size letterbox.
SOTT responded to the increased demand for its products by extending its product portfolio with an additional letter box
The full selection can be itemised as follows: house signs, estate signs, village centre & town boundary signs,
Insulation & Damp Proofing News
SOTT utilises an infinite variety of materials and methods during the manufacturing process and is reliant on an artistic and perceptive approach to design (rather than the more stereotypical mode which is based on computer generated imagery). Experience has allowed the team to gain enriched insight, as Sue concluded, “What we offer is a tried and tested product, as we have over 30 years of experience selling estate signs and show-house signs to all of the major companies. In addition, our customers can rest assured that they will receive the support they require as there will always be a knowledgeable person on the end of a phone line ready to assist them.” T +44 (0)1525 874185 enquiries@sott.co.uk www.sott.co.uk
Environmental Consultants As one of the country’s leading environmental consultancies, ACCON UK is well positioned to assist clients across various industry sectors. With its extensive experience and expertise acquired from years of concentrated service, the competent group can successfully meet the requirements of everyone from property developers, planners, engineers and construction companies to local authorities and government agencies. The Berkshire-based business delivers, to great effect, comprehensive reporting and other such appropriate solutions throughout entire projects (from the design to construction and all operational phases in-between). As a recognised professional with specialties in the following subjects: air quality, noise, vibration, lighting, flood risk, contaminated land ecology, sustainability, Environmental Impact Assessment (EIA) and Civil Engineering Sustainability Assessment (CEEQUAL), ACCON UK can provide suitable advice and information to individuals in need of consultative support. Covering every conceivable aspect of EIA preparation, the ACCON UK personnel comprises seasoned senior consultants with revised capabilities who are completely up-to-date with the latest modifications made to the planning system. This is of course of the utmost importance, particularly because EIAs and technical reports are now a requirement for many planning proposals, and the attainment of accurate, dependable and robust results is fundamental in achieving industry excellence and best practice. The specialist advisors’ main duty is to routinely liaise with clients and local authorities, as this enables them to gain a better understanding of their unique requirements and expectations. Specific
is sponsored by K-Rend | please turn to page 4-5
services provided include the production of cohesive and accurate reports and the utilisation of the most advanced monitoring equipment and modelling software available on the market. This will in turn enable individuals to identify any impacts and required mitigation, prompting supervisors and managers to make important business decisions which will allow them to gain planning permission or discharge conditions with great ease and efficiency. The consultancy, which holds the reputable status as one of the most trusted and competitively priced of its kind (operational within the air quality, noise and EIA segments), has previously worked on a multitude of prestigious projects. It therefore has the proficiency to serve customers working within the transport (road & rail), mining & quarrying, petrochemical, industrial and aviation markets. Other notable schemes have been completed for energy & wind farm developments, residential & commercial developments and sports stadia & recreational facilities. If you are interested in finding out more then please don’t hesitate to get in touch with ACCON UK today; as experts across a wide range of disciplines, the team can provide the necessary guidance (regardless of the project you are working on; developing either a wind farm or a major infrastructure system, for example). The environmental consults will be more than happy to assist clients, so whatever your enquiry you can rest assured that the industry experts will be able to find an effective solution for you. Contact T +44 (0)118 971 0000 enquiry@accon-uk.com www.accon-uk.com
5
Commitment to Excellence
Kitchen and Bathroom specialists Building Solutions UK is extremely proud to present its highly prestigious and richly deserved Commitment to Excellence profile to Roman’s Haus.
appliances, worktops and tiles which can make your dream house a reality,” Preet concluded. “Our fair prices cater to all budgets from £100 to £1,000 and our turnaround time of designs is faster than most on the market. We can also offer an in-house team of designers and experts to care for and advise you on anything you need.
From kitchen supplies to bathroom makeovers and small fittings, Roman’s Haus provide an exceptional service at affordable prices. Satisfying the needs of developers, builders, home owners and many more, the specialist supplier works to any budget or requirement to make your dream home a reality.
“Our aim is to establish ourselves as a reputable kitchen and bathroom company and grow our presence in order to expand. We are currently in talks about opening a showroom in New York and are looking at potential areas in India.
The family run company was set up by brothers Preet and Raman Chind after discovering the lack of quality yet affordable choice on the market for average buyers. Wasting no time, the pair transformed an old, abandoned factory into a 5,000 sq. ft. showroom which now houses some of the best products available. “We wanted to set up a company which allowed people to create their dream kitchen and bathroom at an affordable price,” commented Preet. “While searching for the best products for our target market, we have handpicked from most reputable names in the industry to offer customers a spectacular choice.
suitable for every budget – from the luxury to the affordable.
“We’ve taken special consideration over the price and quality of every one of our products, which we’ll never compromise upon so that you, the customer, will always get the very best.”
Roman’s Haus is also the exclusive London flagship store for the Italian collection Enne, along with stores in Paris, Milan and New York. What sets Enne above the rest is its luxury, beautiful and hand-crafted curved kitchens, each with a choice of handled or handleless doors which are made from real wood veneer.
The range includes the luxurious Bauformat and Burger collections. A true German design, the renowned suppliers focus on solid-built carcass and ready-assembled kitchens that come straight to you and ready for immediate installation Their trademark fittings feature handleless linear kitchen designs that are
For a complete bathroom makeover, choose from one of the specialist brands including Bauhaus, Bette Baths, Simpson’s, Crosswater, GSI Italian design and Hansgrohe. With each collection oozing style and elegance, you’ll be sure to find the right design and products to suit your
6
requirements. The company can also provide a plumbing and fitting service so there is no need to go elsewhere. “Look to us for the beautiful and luxury
is sponsored by Gripple | please turn to page 3
“At Roman’s Haus, we don’t just sell fitted rooms – we provide a service. With our competitive prices and friendly, qualified installers, there’s no reason not to choose Roman’s Haus for all your bathroom and kitchen needs. Visit our showroom today to see the latest range and chat to one of our experts, we guarantee you won’t be disappointed.” T +44 (0)1895 810444 info@romanshaus.com www.romanshaus.com
Building Products & Services News
Heritage Cob & Lime Supplier of Traditional Building Products • Lime Putty • Lime Mortars • Lime Plasters • NHL • Lime Washes • Cob Blocks • Hessian Rolls • Helfix Bars • Trowels • Paint Brushes & Paint Pads • Waxes & Lacquer • Water based Eggshell paints • Casein Paints – for Shabby Chic Look.
Specialists in building restoration
Tel: 01237 477431
Unit 20, Bideford Business Park, East-the-Water, Bideford, EX39 1GC Please visit our website for full range of products
www.heritagecobandlime.com is sponsored by K-Rend | please turn to page 4-5
7
Doors, Windows & Lighting News
New product from Metal Technology defines spaces Leading architectural aluminium manufacturer Metal Technology has launched System 26 Bi-Fold doors within its range offering a premium quality product, superior performance and design flexibility in the commercial and domestic/ self-build housing sectors. Metal Technology’s high insulation BiFold door has been developed to offer exceptionally low U-values while the Slimline profiles maximise daylight into the living space. With options ranging from a single door to seven opening panes offering 18 design variations and up to 6 metres in
width, design flexibility is guaranteed, whatever the project. System 26 Bi-Fold is available in ‘open in’ or ‘open out’ applications with either curved or flush profile door leaves and fully rebated or low thresholds. The result of two years product development work and rigourous testing across all aspects of performance, System 26 offers elegant and aesthetically appealing home living, combined with durability, security and energy efficiency. T +44 (0)28 9448 7777 www.metaltechnology.co.uk
Mind the Sparks! Protect your Work & Staff! Protect Your Clients!
WarmCore Bi-Folds available now from Nordic Aluminium Entering the market last year, WarmCore is the latest innovation in bi-folding doors. With traditional aluminium doors struggling to meet current legislation, WarmCore has been designed to offer both aluminium aesthetics and a market leading thermal performance, ensuring that it comfortably meets the requirements of the Building Regulations – Part L. WarmCore has a unique composite construction, with an orange thermal PVC core and an aluminium covering trim. The unique bi-fold system is available in a wealth of colours, styles and configuration options and has impressive U Values of 1.4 double glazed and 1.0 triple glazed. Doors can be either inwards or outwards opening and up to six metres wide, with as many as seven opening sashes. The sashes can fold in any combination that a customer may wish, however a popular configuration is to have a single door a one end, called a traffic door, which is used for everyday use whilst the rest of the door sashes are locked in place. WarmCore bi-folds have a custom designed door lock, available on no other door system, which
uses a 5 point locking system with three opposed hook locks and twin shoot bolts that engage fully into the aluminium top and bottom tracks, ensuring maximum security. Upgrading to laminate glass will give the doors Secured by Design accreditation, the official UK police initiative designed to cut out crime
Protection for electrical components from Displacement & Damage by other trades, Insulation, Dust, Water, Rodent Droppings & Nesting, Insect infiltration & other occupational hazards.
Please visit www.thermahood.com T: 0845 521 3058 | E: info@thermahood.com
8
is sponsored by Gripple | please turn to page 3
through enhanced security. Nordic Aluminium is one of the first fabricators of the WarmCore system. For more information or to request a quote, please call: +44 (0)113 898 0569 or email: sales@nordicaluminium.co.uk, quoting WarmCoreSolutions.
Lighting News
Now you CAN use smarts wall switches with LED & CFL lamps with confidence Introducing the revolutionary Automatic Switch Load Controller that you can retrofit with nearly all makes of smart switch to get rid of glow and flicker.
an automatic light switch (PIR, timed, delay, or remote control etc.) to be fitted to their state of the art LED lighting installation, only to find the automatic switch has stopped working after a week.
We all like innovation and over the past decade, LED development within the lighting industry has provided possibly one of the biggest leaps forward yet in our industry. Coupled with smart switches and home automation systems, LED has revolutionised the lighting industry, in particular when it comes to energy saving. However, as with so many new technologies in the past, LED brings its own collection of problems for the installer. You only have to look on the internet forums to see electricians desperately trying to find answers to the same problems with LED
lighting: more often than not they have suffered the problem of replacing a customer’s old incandescent lamps for new energy saving
LED lamps only to find that the damn things will not switch off. No matter what you do they just glow or flash. Or the customer asked for
What’s causing the problems? The main reason we all want to use LED lighting is to save energy LED lamps use a fraction of the power of incandescent or halogen, so quite logically they only need a fraction of the power for them to illuminate. So any small voltage/current within the circuit will cause the LED lamps to glow or flash – just the sort of current that is always present in the case of most 2-wire automatic switches offering PIR switching, timing, delay, photocell or remote control.
Sound Solutions News
Most of these automatic switches are designed to operate as a replacement for a standard 2-wire light switch where there is normally no neutral connection available at the switch. On the face of it, that’s good news and an easy install for you, but for these switches to function a small amount of power is drawn down through the switched live connection to operate the switch whilst in standby. That was never a problem for incandescent or halogen because the current was too small to have any effect, but it has emerged as a big problem
with LED lighting. Another common problem arises when LEDs are switched on: due to the circuitry needed to power the actual LED chips a momentary power surge is created. Commonly known as an inrush current, and this can be enough to damage many switches and equipment controlling them. What’s the solution? Until now, there hasn’t been much you can do about it. Changing to a different LED lamp manufacturer is the most commonly shared answer, but that rarely works. You can try changing the automatic light switch, but you will only be going back to change it repeatedly if the switch has a low LED rating or, as is usually the case, no properly tested LED rating at all. Now Timeguard has developed a patented device that creates an electrical environment for automatic switches and LED lamps to operate in harmony without having to modify the automatic switch or LED lamp by diverting the current from the LED or CFL lamp. This new device is called the Timeguard ZV900 Automatic Switch Load Controller: it is small, inexpensive, easy to install, slips neatly through a standard 50mm ceiling aperture and you only need one per switching circuit – and it will work with just about any make of smart switch and LED or CFL lamps so you can go out and fix existing customer problems at a stroke. The Timeguard ZV900 is specifically designed to alleviate issues with switching LED’s and CFL lamps without the need for extensive extra wiring and in most cases no extra wiring at all. The features of this patented unit include: Eliminating LED & CFL glow and flicker in 2-wire automatic light switches, IE: Timed, PIR, Delay/Timelag, Security, Audio and Photocell automatic switches Built in surge & current inrush suppression Boosts 99% of automatic switches LED switching capabilities to 200W Under 1W power consumption No additional cabling to the switch required Fits in the ceiling through a 50mm hole Only 1 x ZV900 needed per switching circuit up to 200W LED/CFL. Contact T +44 (0)20 8452 1112 sales@timeguard.com www.timeguard.com
is sponsored by K-Rend | please turn to page 4-5
9
Roofing News
Romag roof PV technology at UK’s largest zero carbon housing scheme Dozens of new homes on the UK’s largest zero carbon housing development are benefitting from new roof integrated photovoltaics (PV) used to produce sustainable solar energy. The integrated PV roof tiles supplied by Romag have been installed as part of the £12m Park Dale housing development in Castleford, West Yorkshire, where over 90 homes for social and intermediate rent have been built to comply with Level 6 of the Code for Sustainable Homes.
Romag’s roof integrated PV panels have been specified for the UK’s largest zero carbon housing development
The new roof-top solar technology at Park Dale combines renewable energy generation with a glass laminate design to enable the PV cells to blend sympathetically into the fabric of the housing scheme. The system is watertight and complies with building standards as well as fire control and airtightness regulations. Heating demand at Park Dale is expected to be one fifth of the average UK home with associated energy bills around 40% lower than an average household.
and installers, commissioned Romag to produce the 562mm x 1,247mm panels to produce upwards of 83W of power. Romag is the UK’s leading supplier of roof integrated PV systems for the housing sector, with modules that can replace an area of the proposed roof finish and work with all types of covering, from slate through clay to concrete interlocking tiles.
The PV technology has been designed to seamlessly integrate with regular slate tiles to form an eye-catching central feature on the south facing roof of each of the two, three and four bedroomed houses on the development.
The system combines Romag’s experience of producing high quality PV products with a guaranteed, simple-to-install fixing system that can be utilised as a ‘whole roof ’ solution. Panels are available in four different sizes to comply with budget and aesthetic requirements, and can be installed on new build, re-roofing and retrofit project schemes. Product comes with a 20 year performance guarantee.
Beco, one of the UK’s leading PV designers
www.romag.co.uk
Imerys BIPV Photovoltaic Solution Fit and Forget IMERYS are the world leaders in mineral specialties for industry. Imerys Roof Tiles is the UK division of Imerys TC, which has over 200 years of experience in the manufacture of clay roof tiles. Having developed an innovative BIPV integrated photovoltaic solution Imerys have now achieved MCS12 approval to meet the multiple demands of the housing sector. The Imerys PV modules are installed onto industry standard roofing battens at the same time as laying the roof tiles ensuring complete synergy between the two. This makes for a quick and straightforward installation by a competent roofer. Each piece weighs in at only 7kg, making it easy to handle and helping reduce the roof loading weight by over 30kg/m2. Therefore no additional live or dead load structural calculations are required. All Imerys BIPV Modules have a 25 year, 80% minimum performance warranty with the added benefit of a 30 year anticorrosion guarantee on the aluminium frames, including a 30 year watertightness guarantee*. This industry leading triple guarantee provides complete peace of mind for the whole roof when combining our roof tiles, which themselves have a comprehensive 30 year durability guarantee. It is literally ‘Fit and Forget’ Imerys will always be there to support you. The clay roof tile products from the IMERYS range have excellent environmental credentials and can achieve an A+ rating in the Building Research Establishment’s (BRE) Green Guide to Specification and BES 6001 Responsible Sourcing. This combination with our BES EN 14001 Environmental Management Systems ensure IMERYS products achieve a low carbon footprint to meet the requirements of BREEAM rating and code 4 and beyond of the Code for Sustainable Homes.
10
Due to our large production capacity and ex-stock availability via our national network of stockist’s Imerys are able to support the expanding new build market with innovative PV solutions with attractive ‘roof integrated systems’ that are maintenance free offering a market leading combination guarantee/warranty. NBS fixing specifications are also provided along with project assessment and design support from Rodney Hogg (UK Renewables Manager) for Imerys Roof Tiles who can be contacted below. For further information, contact: rodney.hogg@imerys.com or visit: www.imerys-rooftiles.com *30 Year Guarantee applies to Imerys Large Format clay tiles. All other Imerys clay tile formats are 20 years.
is sponsored by Romanhaus | please turn to page 6
Drainage News
is sponsored by Bifold Group | please turn to page 8
11
Granite Solutions News
12
is sponsored by Romanhaus | please turn to page 6
Granite Solutions News
is sponsored by Bifold Group | please turn to page 8
13
Air-Conditioning & Ventilation News
Solutions to Happy, Healthy Homes ESS Ventilation is based in Bordon, Hampshire and cover London and South East. With a team of dedicated specialists in ventilation, condensation and mould. Preferred installer of choice across London and the South East, we are renowned for our leading range of premium quality ventilation equipment, working with several major manufacturers. With over 15 years experience, our engineers are all qualified to BPEC standards in installations, commissioning and servicing of different ventilation units suitable for corporate and home usage. As an industry expert, ESS can suggest which ventilation systems are most suitable for individual applications. A properly ventilated house will not just keep the occupant happy, it will also help care for the building itself. A poor system will make a residence feel draughty or airless due to the moisture being retained and the inadequate air flow, which will in turn lead to dampness and a
build-up of indoor air pollutants from household products. You can prevent these problems from occurring by contacting ESS today and investing in a dependable ventilation system that will enable you to control your property’s fresh air flow effectively and securely.
Flooring News
ESS work with several large Housing Associations, saving thousands in legal disputes, ensuring their homes are adequately ventilated to prevent mould and condensation. Speak to one of our consultants today. Contact T +44 (0)1428 751646 sales@essllp.co.uk www.esscontracting.co.uk
Do your properties have condensation problems? Do you have mould growth in your properties? Is mould causing health & legal problems?
We can solve these problems for you Preferred installers for Housing Associations in London and South East • Installations • Commissioning • Servicing
S
av
www.essllp.co.uk
London: 0207 123 4157 South East: 01428 751646
14
ing tho u sa
nds i n
legal disp utes
is sponsored by Romanhaus | please turn to page 6
Sound Acoustics News
ACCON UK are one of the UK’s leading environmental consultancies, specialising in air quality, noise, vibration, lighting, flood risk, contaminated land and Environmental Impact Assessment (EIA). With many years of experience and unrivalled cross sector expertise, ACCON UK deliver comprehensive reporting and effective solutions to property developers, planners, engineers and construction companies, as well as Local Authorities and Governmental Agencies.
nn Noise & Vibration
nn Ecology
nn Light
nn Contaminated Land
nn Air Quality
nn Sustainability
nn Flood Risk
nn CEEQUAL
ACCON are able to provide in-depth advice and expertise during the design, construction and operational phases of all project types. Whatever you are developing, whether it is a wind farm or a major infrastructure system, and need environmental consultants with experts in a wide range of disiplines, contact ACCON UK. We offer foccused solutions to suit your individual requirements.
www.accon-uk.com Tel: 0118 971 0000 Fax: 0118 971 2272 Email: enquiry@accon-uk.com Unit B, Fronds Park, Frouds Lane, Aldermaston, Berkshire RG7 4LH is sponsored by Bifold Group | please turn to page 8
15
Sanitation News
Lee Sanitation: A lifetime in the ‘Business’ closed toilet system installed rather than the time honoured tradition of pumping the waste overboard and into the canals and rivers. The hire boat industry and the boat owners needed solutions and so from this point LeeSan was born.
You could be forgiven for thinking that Lee Sanitation are the new kids on the block when it comes to providing sanitation for the portable industry. The truth is the Company has a long history in supplying solutions for mobile welfare. The story started over 40 years ago when the then British Waterways Board, the custodians of the inland waterways of the UK, made it a requirement for all hire boats on their navigations to have a
Having spent the early years providing the toilets, tanks, pumps and all the system ancillaries for the boats it became obvious to the hire boat companies that there would be a requirement for some efficient, well-engineered solutions for the effective removal of the waste from the boats. Hire boats had been using various methods of discharging boats with very little success costing both time and money. LeeSan took up the challenge and can now offer solutions to marinas that provide a service for all types of vessels from small sailing boats to the biggest of Superyachts. www.leesan.com
Timber & Landscaping News
Established 1990, Quality steel craftsmen Paddock Fencing is an established business specialising in traditional style steel products. Our products complement many large estates and country homes around the UK. We specialise in Estate Fencing, gates and tree guards. All products are made to order and we can offer many different sizes and styles to suit our customers' needs. We source the highest quality materials. Our highly experienced team fabricate our bespoke products and complete our products with a variety of finishes. This ensures our customers’ purchase will last for years to come. We also offer bespoke steel framed furniture for your home and garden as well as a full CAD design and fabrication service for many companies and individuals. Estate Fencing We offer high quality British made estate fencing to estates and homes up and down the country. Our estate fencing comes in two different types to suit all land
Timber Frame
Design • Manufacture • Install
Timber Innovations are specialist Self Build Timber Frame manufacturers, providing the design, manufacture and installation of Timber Frame, SIPs and Oak Frame dwellings, bespoke timber features, roof trusses/panels and engineered floors. conditions, whether they are level (panel type), or undulating (continuous type). Tree Guards We manufacture high quality steel tree guards to enhance and protect your trees from Livestock, including cattle, horses, deer, sheep and rabbits, as well as mowers and vandals. T +44 (0)1733 270724 sales@paddockfencing.com www.paddockfencing.com
“Building someone’s home is a privilegeTM” “We are pleased to launch Innovations Plus – the wrap-around support service for selfbuilders”
Contact us today with your requirements
Call: 0121 314 7735 or email: selfbuild@timberinnovations.co.uk www.timberinnovations.co.uk
Trees on development sites – who you gonna call? If you google ‘local tree contractor’ you’ll find there’s no shortage of people and companies out there offering tree removal and pruning services. But tree work is a hazardous occupation. Contracting to a company without the necessary skills and competencies can lead to injury to people, prosecution, substantial fines or damage to property and the tree; not to mention irreparable harm to your reputation. Gristwood and Toms is the largest, privately owned arboricultural company in the UK and is an Arboricultural Association Approved Contractor. The widely recognized industry experts have the professional skills, experience, accreditations and national coverage to give you complete peace of mind when contracting specialist tree works. Tree Surveys for Development Sites Gristwood and Toms provides reliable and fast development site surveys, conducting reports and assessments meeting the requirements of British Standard 5837:2012. Its dedicated professional consultancy division identifies specimens suitable for retention and ensures any planning
16
Planting Trees gives Peace, Beauty & Life to our Landscape & the Environment
restrictions or conditions applied to trees onsite are met accordingly. Tree Clearance, Pruning and Planting The contracting department, meanwhile, implements the report recommendations and provides the necessary tree and vegetation removal services, and the specialist tree planting division pride themselves on offering ongoing aftercare and maintenance support. T +44 (0)3458 731500 info@gristwoodandtoms.co.uk www.gristwoodandtoms.co.uk https://vimeo.com/122534851 https://vimeo.com/117804671
Trees Direct was established 17 years ago as a family run business and is based in Shropshire. We keep many of our trees and shrubs on site while working with leading reputable suppliers both in the UK and abroad. Constantly expanding whilst maintaining our business on a personal level. Trees Direct specializes in sourcing and putting together suggestions and plans for plantings and ideas for those who just don’t have the time or contacts to do this. We have co-ordinated and put together many projects and are proud to have worked with The Woodland Trust, The Royal Institute, The Conservation Foundation for the
Great British Elm Experiment together with many other interesting plantings, from Regeneration Projects to Councils, Schools, Designers, Developers and Corporate companies as well as private landowners and individual customers. Working with our clients on a one to one basis we are able offer our guidance and advice to ensure that the end result will bring pleasure and satisfaction for years to come. We are very aware that we must all work to protect the land for future generations and our fauna and flora. It is of great importance to take special care that trees and shrubs are planted to protect and
preserve the environment and our wildlife. Our participation calls for a dedicated commitment so there is always someone available on the phone to discuss and advise our clients with help on plans and suitability before commencement of projects. We are just as happy to help source that one special tree as to working with our clients for large plantings. We are aware that every project is personal and important to the client, so we are always open to discuss ideas, offer guidance and advice to ensure total satisfaction in our service and products. However small or large the job, we are here to guide, advise, design and deliver.
www.treesdirect.co.uk | Email info@treesdirect.co.uk | Tel: 01584 878878
is sponsored by Romanhaus | please turn to page 6
Heating & Plumbing News The UKs Largest Heating Element Manufacturer
Leading the way Elmatic (Cardiff) Ltd is the largest manufacturer of Industrial Electric Heating Elements in the UK. Elmatic Ltd have the widest product range to meet our customer’s requirements. Our product range includes: ää Cartridge Heaters ää Mica Insulated Heaters ää Ceramic Knuckle Heaters ää Tubular Rod ää Immersion Heaters ää Air Duct Heaters ää Nozzle Heaters ää Ceramic Core Heaters ää Square Section Heaters ää Strip Heaters ää Roller or Disc Heaters ää Fabrication & Sheet Metalwork.
Please telephone 029 2077 8727
Email: sales@elmatic.co.uk • www.elmatic.co.uk
Why Electrical Shops should invest in a Pipe Threading Kit Threading pipes is one of the most common tasks that electrical shops take on every day. It’s rather an arduous task, especially when done manually. The problem with this task is that when it needs to be done, the work diminishes the business’s productivity because other, more important tasks are set aside in order to complete pipe or cross threading. To prevent this task from stealing too much time away from other important objectives of electrical specialists (such as training apprentices), electrical shops should consider investing in a good threading tool that can accomplish the job faster. Big, traditional pipe threaders are good enough for the job; the problem, however, is that they are quite pricey. Fortunately, a compact pipe threading kit has become available and it can make threading pipes not only faster to complete, but also much easier. That’s because the kit can be taken anywhere; instead of workers leaving their stations to use the big pipe
threader and waiting for their turn, they can use the portable version right in their stations or in any other location where they may have a need for it. For smaller electrical shops, these portable pipe threaders are definitely more ideal because they are way cheaper than traditional threading machinery; plus, they deliver the same quality results. They can save a huge amount of money by opting to use these, and even get more mileage. T +44 (0)7908 724747 info@impactpipepower.com www.impactpipepower.com
Flood Defence News
Wood chips to heat and power According to principles of cogeneration, the Spanner RE² GmbH’s fully automated Wood Cogeneration System converts natural wood chips into power and heat. To run the biomass CHP, Spanner uses a Gasifier to produce woodgas which is burned in a normal gasengine. More than 500 units worldwide prove their reliability and technical advantages from day to day in agriculture and forestry, hotels, restaurants and district heating. German engineering meets German craftsmanship. This technology sets the sun energy stored in wood chips free upon demand. Heat whenever you need it, surplus electricity is fed to the grid.
What´s your benefit? For running these systems, you get a combination of subsidies from RHI and ROCs, the highest returns of all renewables in the UK. The systems are fully approved by OFGEM. If you want to learn more about the Spanner Wood cogeneration system, please visit: www. holz-kraft.de/en or contact us directly to get in contact with our sales team. Matthias von Senfft T +49 (0)8773 70798162 matthias.vonsenfft@holzkraft.de www.holz-kraft.de/en
Infrared Heating Solutions ‘Eco Infrared Technologies’ company specialises in latest infrared heating technologies and offers a variety of infrared heating solutions for domestic, residential, commercial and industrial buildings that can help to save money on heating bills. As statistics show, infrared heating users can save up to 50% on energy costs. Infrared heating is beneficial for people with health conditions such as asthma, bronchial ailments or arthritis. Its unique heating method does not create dust circulation in the room. A warm cosy zone is created when infrared heating rays are absorbed into the walls, ceilings and furnishings. This comfort heating system also prevents unwanted humidity that causes mould to grow. Infrared heating products are made using aerospace-quality materials and meet ecological standards, so they do not emit harmful electromagnetic radiation. Infrared heating creates the surroundings where the floor is
is sponsored by Bifold Group | please turn to page 8
warmer than the ceiling. Such method of heating is more pleasant to a human body than the convectional heating that heats the air and relies on air currents to spread the heat in the room. Infrared heating acts directly and that means it does not require any contact such as air currents to carry the heat. Infrared Technologies will be exhibiting at the Grand Designs exhibition in October at the NEC Birmingham. T +44 (0)1202 975384 info@infraredtechnologies.co.uk www.infraredtechnologies.co.uk http://www.facebook.com/ EcoInfraredTechnologies https://www.linkedin.com/ company/eco-infraredtechnologies-ltdhttps://twitter.com/ EcoInfraTech
17
Flood Defence News
Geoflex – Plastic sheet piling by Cofra Our History Founded in 1923, Cofra is an experienced and proven partner in soil improvement techniques. Originally an Amsterdam based contractor, with local operations, Cofra has evolved in to an international force in the soil improvement market. Cofra has international offices and an extensive network of Agents. Since 2006, Cofra has been a division of Royal Boskalis Westminster, a dredging conglomerate with international operations. This relationship has further strengthened Cofra’s global position.
Experience Cofra Ltd have many years of successfully installing plastic sheet piles in various ground conditions, at lengths up to 7m and for various applications. The most significant schemes have been related to flood defence and improvements to existing earth flood bunds. The most notable schemes to date are: Gainsborough: 1.7km of Geoflex 210 wall to improve the impermeability of the earth flood bund, including hydrophilic seal to all clutches Guinness: 3.6km of Geoflex 420 wall to improve factor of safety against slip failure Worthing: 500m of Geoflex 210 to improve the impermeability of the existing shingle ridge flood defence, including hydrophilic seal to all clutches Magor Lorry Park: 300m of Geoflex 420, used as hydraulic cut-off barrier to prevent migration of ground water contaminants, including hydrophilic seal to all clutches.
Our Core Values Innovation, reliability and professionalism are Cofra’s primary core values. Our proactive approach and advanced equipment have earnt Cofra a leading position as a soil improvement contractor. Our core values have made Cofra a reliable international knowledge partner. Our Techniques Cofra has a wide range of techniques for soil improvement. With state of the art equipment and its own Geotechnical Department, Cofra specializes in consolidation and compaction techniques for cohesive and granular soils.
Summary Cofra’s wealth of experience, innovation, in-house manufacturing, commitment to technical expertise and directly employed installation teams ensure the successful delivery of your project.
Geotechnics BV is an independent production and trading company within the Boskalis Cofra Group. Geotechnics primary focus is on the production and sales of the MebraDrain range of products associated with cohesive soil consolidation. These materials are manufactured in-house and distributed globally. The Geoflex Product Geoflex was developed as a replacement for tropical hard wood in applications such as earth-retaining constructions and bank protection. The aim was to produce an economically viable sheet pile with a long service life. An optimal weight/strength ratio was determined with the aid of computer models. This gave rise to two types of profile: the Geoflex 210 and the Geoflex 420. Why Geoflex? Vinyl is a material that has excellent resistance to weathering and possesses a long service life. Furthermore, it is unaffected by natural substances that occur in the soil, rodents and salt and fresh water. This makes it possible to
Contact T +44 (0)1293 871637 office@cofra.co.uk www.cofra.co.uk
develop bank protection and earth-retaining constructions with a much enhanced service life.
High production Lightweight installation equipment
Installation The Geoflex profile weighs between 3 and 5kg/m and thus the 210 C (corrugated sheet) weighs only 11kg/m2. It is therefore very easy to handle, even in longer lengths. Before installation, two sheets are assembled to form a 0.5m wide profile.
Geoflex can be installed by means of a ‘water jet system,’ free fall hammer, pneumatic hammer or vibrator, or, if the ground permits, it can be inserted with an excavator. At greater depths or in the case of hard ground, a steel guiding sheet profile is used. Geoflex can easily be combined or connected with other construction materials. The sheets can be glued, welded, sawn or drilled. Wood, concrete, steel or plastic can be used as a cap and wale system. The application of waling with anchoring is also possible.
This provides the following benefits: Low transport costs
Geoline: Flood Barriers Supplying and installing thermoplastic & geosynthetic lining membranes, spray-on coating systems and thermoplastic pipelines for the water, services, pharmaceutical and waste industries is what Geoline Ltd does best. The Irish company, which is part of the LSW Group has become a recognisable force in recent times largely for its contribution to the flood prevention market. The organisation has assisted thousands of individuals across the world with the completion of specialist projects involving water control; catering to the needs of local authorities, public bodies, general industry, the food & agriculture sectors, golf clubs and of course, the general public. Previous schemes have included the effective sealing of landfills, canals, reservoirs, lagoons, tanks, bunds, lakes (and other such vulnerable areas) and the efficient instalment of thermoplastic pipelines for drinking water, effluent, storm water, sewage, landfill gas and the reinforcement of poor quality soils beneath roads, railway embankments and car parks. Geoline is focused predominantly on the reduction of storm and flood damage.
Understanding that the destructive effects of these natural disasters place an enormous economic strain on property, homeowners, businesses, insurance companies, public authorities and subsequently, the taxpayer, the organisation strives to reduce (and prevent where possible) the occurrence and impending expense of storm and flood damage.
emptied, effortlessly transferred and safely stored once the flood risk has diminished. The Beaver Flood Barrier System can also be reused, which makes it a solid investment that is in effect, more resourceful than the traditional mode of sand bag positioning (particularly for those living and working in areas susceptible to repeat flooding).
Saving millions of pounds worth of residential ruin and commercial catastrophe, Geoline’s Beaver Flood Barrier System comes with a whole host of financial and operational benefits. The specially developed protective product comprises two PVC tubes set side by side; forming a robust flood barrier with the remarkable ability to hold back up to 1,900mm of floodwater once permanently joined together (an additional tube on top of the twin element can be connected if the situation necessitates further hold back capacity).
Geoline’s extraordinary innovation offers a faster, stronger and more superior method of inhibiting water seepage, providing a
The temporary dams are incredibly easy to transport and set up because as blow-up flood barriers, they can be swiftly moved into position, inflated and assembled. The heavy duty tubes are then filled with water using a nearby water source or hydrant; the liquid contents ensure that the barrier will adjust to the shape of the surface underneath with great versatility and speed. The individual components are combined by a patented link system, which in essence makes it possible to erect flood barriers of any length to suit all situations and locations. Because no extra structures are needed, the watertight tubes can be quickly
18
cost-effective means of reducing storm and flood damage to road, land and buildings. The barriers have proven vital in more than 150 cases, and over a staggering 80,000m of product has sold to date. To find out more please consult the team using the contact details supplied below. Contact T +44 (0)1372 434672 info@geolineltd.co.uk www.geolineltd.co.uk
BEAVER FLOOD BARRIER SYSTEM Tel: 01372 434672 | www.geolineltd.co.uk
The Beaver Flood Barrier System helps to prevent or at least reduce flood damage & their economic costs. The Beaver Storm & Flood Protection System consists of two water filled PVC tubes laid side by side, permanently joined together to form a flood barrier that can hold back up to 1,900mm of floodwater.
is sponsored by Gripple | please turn to page 3
Flood Defence News
Floodex 2016 On the 18-19th May 2016, Floodex launched its first ever exhibition which focused on innovative and practical solutions to protect against flooding. The show, which took place at the Peterborough Arena, welcomed over 1000 visitors consisting of top quality buyers and specifiers, all looking for ways to improve their flood protection and management. With some of the best in the industry all under one roof, Floodex saves visitors time, money and effort researching the market to find a solution that best suits them. The show bought together leaders in the Local Authority, Internal Drainage Board (IDB), engineers, builders, designers, consultants, contractors and planners with the supply chain and service providers, providing a fantastic opportunity for networking. “As flooding in Britain continues to be a significant problem, it is of the upmost importance to identify the most effective solutions and invest in sustainable, long term solutions,” commented Event Organiser Jon Irwin. “Whether you are looking to put procedures in place to prevent flooding and damage, or to set up a system for post flooding such as clear up operations, everything you need is in one place. “For an initial launch, I feel the show
couldn’t have gone better! The quality of the visitors was fantastic and we saw some really interesting and informative talks from key figures in the industry. The feedback we received was also phenomenal. One visitor told me that almost every person that attended his stand was a decision maker and there is nothing better than meeting people face to face and showcasing your solutions in person. I have worked on many events in my time, but it really doesn’t get better than that!” Following the huge success of this year’s event, Floodex 2017 is already booked for next year with many exhibitors and visitors set to return. Once again taking place at the Peterborough Arena, the show aims to boost
visitor numbers and increase support from local authorities. Floodex has also been offered the incredible opportunity to feature at Amsterdam’s International Water Week – an established event that witnesses around 20,000 visitors and brings together the best solutions in the industry. “Looking at what we have achieved this year, I have no doubt next year’s event will be even better!” concluded Jon. “I would encourage anyone who is looking for an infrastructure based solution that will protect against flooding to come and see what the show has to offer. With a wealth of knowledge and advanced solutions all in one room, you are guaranteed to leave not only better informed but with a system or plan that best suits you and your environment.” Just a few of the exceptional comments from the show included: “One of the best events we've attended
is sponsored by K-Rend | please turn to page 4-5
...interesting topics and speakers – and great networking. We will definitely be back in 2017!” Britt Warg, UK Manager – Geodesign Barriers “As a new exhibitor to this market we found Floodex hugely beneficial” Peter Beach, Sales & Marketing Manager – Genquip “We were very happy with the quality of the delegates and had many interesting conversations with new contacts.” Mark Goodger, Regional Technical Manager– Hydro International For more information about exhibiting or visiting Floodex 2017 on the 17-18 May 2017, visit the website at: www.floodex.co.uk
19
Flood Defence News
The largest electric submersible pump & accessory hire fleet in the UK Founded in 1982, Pump Supplies Ltd is a leading supplier of submersible pumps in the UK and Ireland. Operating out of 5 strategically located depots our business specialises in all aspects of electric submersible pumps and accessories. From hire & sales through to full service and aftermarket support, pump station supply and installation, all backed up with a full range of monitoring and control equipment for both permanent and temporary installations. At the core to our business is hire. Our fleet contains over 2,500 pumps of various sizes, impeller options and installation types to suit many applications, backed up with all the necessary accessories to ensure we can provide our customers a complete solution to their dewatering and pumping needs.
from pipework and control panels, to generators and fuel tanks‌all backed up with a full round the clock 24/7 site support. Pump Supplies are also leading distributors of many pump brands, most notably Flygt. As leading distributors we offer very competitive pricing, hold huge stocks of both spares and pumps ranging in size up to 90kW- all available for immediate despatch. As a key pump distributor we offer full aftermarket support to all our customers, having teams of service engineers located within our UK depots, offering both planned maintenance services backed-up with fully equipped service vans offering on-site service and repair.
The versatility of our hire fleet was crucial in helping the UK deal with the recent devastating floods throughout the UK. During the Somerset floods, Pump Supplies provided around 80 pumps ranging in size from 37kW right up to 250kW- all equipped with the latest impeller technology to enable effective and reliable removal of the flood water.
Our support to customers does not stop at supplying pump and accessories, in house knowledge and innovation ensures that we are able to meet our customers’ needs for all temporary and permanent monitoring and control requirements. Our extensive skills include monitoring of flow, chamber levels and water quality all supported with the ability to stream real time data directly to our clients preferred device, smart phone or via the web.
Our support did not end at supplying the pumps; all the necessary ancillary equipment was delivered and installed by our team of engineers, ranging
Please visit our website: www.pumpsupplies.co.uk or contact us at: enquiries@pumpsupplies. co.uk for more information.
20
is sponsored by Gripple | please turn to page 3
Flood Defence News
is sponsored by K-Rend | please turn to page 4-5
21
Building News
Retail, Acoustic & Commercial Interior Contractors
Introducing The SolteQ Energy Roof – Electricity and Heating from your roof A stylish roof that is actually a cutting-edge PV system that can generate more than enough power to meet the energy demands of the average household. SolteQ-Quad 40 tiles provide the basis for the energy house of the future and they are available now in the UK. They are a hi-tech highly efficient monocrystalline roof tile available in a variety of beautiful colours to suit individual requirements. They are lightweight and suitable for both new build and renovation projects alike and can be laid in the classic style or in a fish scale design in order to achieve the desired look. In addition to the electricity that is generated by the tiles, the roof can be utilised as a source of heat, to such an extent that heating costs can be reduced to zero when the roof is used in conjunction with a heat pump & appropriate buffer storage.
For further information on how to make energy bills a thing of the past, please contact: Freephone 0800 6894194 | Email info@solteq.uk
www.SOLTEQ.uk | www.SOLTEQ.solar The Design communities’ awareness of the importance of good room acoustics is growing. Speech intelligibility in the classroom is critical for our children. Studies revealed that the loss of consonants from teacher to pupil, particularly in old Victorian classrooms, adversely affected learning. In Healthcare, studies have shown that noise, which can be defined as ‘unwanted sound’ can increase heart rate, blood pressure, respiration rate and even blood cholesterol levels. Acoustic design is particularly important in the care of the elderly experiencing hearing loss and those with dementia. Communication is essential and therefore unnecessary or unwanted acoustic ‘clutter’ must be reduced to provide the best possible hearing environment. Excessive noise or overstimulation can lead to confusion and frustration and even affect balance. Risk of falls, frustration, anger and aggression can result from a poorly designed acoustic environment. Acoustic absorption is essential in cinemas,
theatres and performance spaces to prevent reverberated sound from the sound system or the orchestra/performer interfering with clarity. In offices and conference rooms sound absorbing surfaces reduce acoustic ‘clutter’ providing a less stressful and pleasant environment. Who has not been frustrated in a restaurant not being able to hear the person across the table because all the smooth, hard, windows,floor and ceiling surfaces are bouncing the sound around the room? Sound Solutions Ltd’s proprietary SoundStretch fabric acoustic wall lining system provides an attractive solution to enhance room acoustics and speech intelligibility. The system is built on site and can therefore be retro-fitted to existing spaces. Contact T +44 (0)1491 638906 info@soundsolutionsltd.co.uk www.soundsolutionsltd.co.uk
Contact us for expert advice: 0800 772 0194
Got Scratched Glass?
We can help you! Professional cost-effective and hassle free service. We polish out scratches and restore toughened, laminated, mirrored and tinted glass.
T 0800 772 0194 | www.clarityglassrepairs.co.uk
22
is sponsored by Gripple | please turn to page 3
Building News
WANTED We Buy Plumbing Stock Cash waiting for slow moving, bankrupt or unwanted stock. We buy from Gas Engineers, Plumbers and Merchants (Discontinued stock considered)
Y Boilers Y Valves Y Timers Y Pumps Y Stats Y Showers Y Water Heaters Y Etc
Unused Only Text info to Martin on +44 (0)780 390 4051 Email: webuyplumbingstock@live.co.uk
Passionate about your new Ventures As dedicated experts in flexible structural defects insurance, CRL is a company prioritising the safe and careful protection of your investments. Its refined and adaptable insurance plans are specifically designed for different types of construction and homebuilding professionals keen to enhance security wherever possible in regards to their purchased properties. CRL can arrange coverage for any
contractors and homeowners across the UK with its vast range of experience and knowledge. Solutions come in the form of structural defects insurance, road bonds & surety, building control expertise and developer insolvency cover, and a qualified surveyor is readily available to visit sites at key points in the construction stage. residential building, carefully tending to the needs of builders, developers,
T 0800 772 3200 www.c-r-l.com
CRL & Capita Building Standards (CBS) have joined forces STRUCTURAL defects insurance provider CRL and Capita Building Standards (CBS), have joined forces to create a new client portal that streamlines building regulations and warranty services.
a significant time saving from application submission to completion. At present, the end user would hear nothing from submission until their application was either rejected or approved typically between five to eight weeks later.
The CBS Client Portal will provide a consolidated service for building regulation and warranty requirements to revolutionise the current building standards procedure.
public and private sector clients.
The portal combines CRL’s ten-year structural defects insurance and Capita’s Approved Inspector building control services in a single online product for
This combined service will not only provide the end user with the confidence that their application is progressing, but will provide
is sponsored by K-Rend | please turn to page 4-5
Steve Mansour, CEO at CRL Management Limited (Pictured), said he’s delighted CRL were appointed as Capita’s preferred ten year structural defects provider and predicted a high level of take-up for the product. www.c-r-l.com
23
Powder Coating News
Challenges us to find you a Solution... The Flexible Coatings Company Thermaset Ltd have established an enviable UK-wide reputation for innovation and excellence in the formulation and manufacture of thermosetting powders for electrostatic application. Established in 1984, our success has always been based on the principal that our customers’ problems are our opportunities. Like many companies, we had humble beginnings, but we have grown and thrived in an increasingly competitive market place by maintaining the exact same focus on customer service we had on day one. For our customers, this has meant security in the knowledge that we provide the right solutions at the right time – no matter what the request. The expertise of our personnel in powder coating spans over 30 years. ✔✔ Widest stock range in the UK ✔✔ Over 100 years colour matching experience ✔✔ UK wide technical sales force ✔✔ Next day delivery for stock items.
T 01827 55777 F 01827 53773 E info@thermaset.co.uk W thermaset.co.uk A Thermaset Ltd, Claire Works, Anders, Lichfield Road Industrial Estate, Tamworth, Staffordshire, B79 7TA, United Kingdom Printed by Iliffe Newspapers • Distributed by Media Matters Direct, Tel: 07966 152259, www.mediamattersdirect.co.uk