0121 711 2760 • www.buildingsolutionsuk.co.uk
Issue 818 • September 2016
WE’RE NOT JUST STRUCTURAL WARRANTY AND BUILDING CONTROL, WE’RE A SUPPORT NETWORK For more information, please contact 08444 120888 or visit www.premierguarantee.co.uk
SPOTLIGHT:
Refurbishment & Conversion Schemes Building conversions as we know are often difficult to complete, frequently with costs spiralling as unknown defects surface. Good and correct investigation can reduce the unknown, however we often see work proposed with minimal investigation or inappropriate investigations employed, based on a standard approach. Refurbishments and conversions can come with their problems which may result in claims being made. This can include issues of damp, mould growth, water ingress and failing roof coverings, with many issues of damp problems, mould growth, water ingress and failing roof coverings. CIRIA 111 (Structural Renovation of Traditional Buildings) provides guidance on the level of investigation as well as typical construction methods used and issues frequently encountered, it is applicable to most low rise buildings of the 18th, 19th and 20th Centuries. However even with these fairly well understood buildings, issues occur, we often see remedial DPCs injected of inappropriate type for the wall construction, and increasingly at the wrong height (eg above structural floor joists) inadequate investigation of embedded timbers or a reluctance to re-cover a roof that although may initially appear to be in good order has in reality never performed to modern requirements and importantly modern expectation. Unfortunately, Planning conditions and Conservation control can reduce the appropriateness of a building for conversion to residential use, it is not the case that we don’t agree with these controls, its more that unfortunately new home purchasers have expectations that their new home will perform in the same way as a newly built property and often this isn’t the case, from single glazed windows causing condensation to appear during colder months, to ongoing maintenance requirements and increased sensitivity to a changing climate, the pitfalls can be huge. Fact is that most properties built in the last 150 years
are robust, unfortunately unsympathetic use, poor maintenance and simple issues such as increasing ground levels can introduce the enemy of most buildings – moisture, by far and away the greatest defect we see in buildings proposed for conversion is water ingress through failed roofing and gutters/downpipes (usually as a result of poor maintenance) and moisture rising, not through a failed DPC but usually a bridged perfectly good DPC with resultant rot to timbers both visible and invisible behind wall coverings and other finishes. More recent buildings aren’t devoid of these issues, more that they contain less timber, and were built to more modern standards, however these present other problems such as concrete defects, cladding issues, and in some cases structural issues. There is a lot of guidance out there to assist in the process of conversion, however the aforementioned CIRIA document is an excellent start, but reference to British Standards and even some historic association documents can provide an excellent source of further guidance, and don’t forget we can help you too! Involve us early and we can recommend the type and level of investigation, so that when you start hopefully there won’t be so many unknowns, and where practical we will agree the retention of elements or make clear where replacement is the only realistic approach.
0121 711 2760 • www.buildingsolutionsuk.co.uk
Inside this issue Cemex
Flood Expo Review See them on page.................... 4
Knotweed
Contamination Expo Review See them on page.................... 8
Huesker
Marine & Coastel Show Review See them on page.................... 9
Heritage Cob & Lime
Building Products News See them on page..................10
LeeSan
Commitment to Excellence See them on page..................10
Langs Quality Furniture
Commitment to Excellence See them on page..................11
Schneider
Building Automation News See them on page..................11
ESS Ventilation
HVAC News See them on page..................14
Issue 818 • September 2016
A Trio of Awards for Nationwide Hygiene Nationwide Hygiene Supplies Ltd has been acknowledged by the London Stock Exchange as one of the 1000 Companies to Inspire Britain. The report and listing identifies the UK’s fastest-growing and most dynamic small and medium sized businesses (SMEs). In order to be included in the list, companies needed to show consistent revenue growth over a minimum of three years, significantly outperforming their industry peers. Nationwide Hygiene Supplies has always placed an emphasis on entrepreneurial and local service throughout its network of 35 branches, with each location managed and operated by investor shareholders and staffed by highly experienced cleaning and hygiene professionals. Nationwide has also received the industry acclaimed
management companies, educational establishments and healthcare organisations throughout the UK and Ireland.”
Cleaning Products Company of the Year award from Building & Facilities News. A spokesman for Building & Facilities News said, “Nationwide Hygiene has the competency and expertise to satisfy the needs of large multi-national corporations as well as smaller, local companies. Its highly efficient and dependable services and products have been used extensively by facilities
Entering the market last year, WarmCore is the latest innovation in bi-folding doors. With traditional aluminium doors struggling to meet current legislation, WarmCore has been designed to offer both aluminium aesthetics and a market leading thermal performance, ensuring that it comfortably meets the requirements of the Building Regulations – Part L. WarmCore has a unique composite construction, with an orange thermal PVC core and an aluminium covering trim. The unique bi-fold system is available in a wealth of colours, styles and configuration options and has impressive U Values of 1.4 double glazed and 1.0 triple glazed. Doors can be either inwards or outwards opening and up to six metres wide, with as many as seven opening sashes. The sashes can fold in any combination that a customer may wish, however a popular configuration is to have a single door a one end, called a traffic door, which is used for everyday use whilst the rest of the door sashes are locked in place. WarmCore bi-folds have a custom designed door lock, available on no other door system, which uses a 5 point locking system with three opposed hook locks and twin shoot bolts that engage fully into the aluminium top and bottom tracks, ensuring maximum security.
Upgrading to laminate glass will give the doors Secured by Design accreditation, the official UK police initiative designed to cut out crime through enhanced security.
B&D Murkin Flexidisc Sander So what is Flexidisc?
Starter Kit
Rainwater Harvesting
Product Innovation Award See them on page............ 22-23
For more information or to request a quote, please call: +44 (0)113 898 0569 or email: sales@nordicaluminium. co.uk, quoting WarmCoreSolutions.
Heritage Cob & Lime Supplier of Traditional Building Products
Health & Safety News See them on page............ 16-17
Stairs & Staircases News See them on page..................18
T 0844 499 6380 www.nationwide-hygiene.com
WarmCore Bi-Folds available now from Nordic Aluminium
Invista
Kwikstairs
In addition, Nationwide has picked up the internationally recognised ‘Commitment to Excellence’ award from Best Practice UK. A spokesman for Best Practice UK said, “Serving clients at international, national, regional and local levels is due to Nationwide’s well established network of shareholder companies operating throughout the UK and Ireland (along with its European and US partners, INPACS and Network). One of its strengths is the brand’s capability to deliver its reputable services to clients of all sizes, from small local companies to large distinguished multi-nationals.”
In short it’s whatever you need from the following: • In its basic state it’s a general sander, but converts in seconds to • A super-fine finishing sander • A polish applicator • A bench grinder • A polisher • A general purpose sharpener • It also grinds glass and nails • A partial angle grinder With prices starting from ONLY £28 for a starter kit! Visit our website for more information and to buy yours now! www.letonkinoisvarnish.co.uk
www.facebook.com/solutionsuknews
• Lime Putty • Lime Mortars • Lime Plasters • NHL • Lime Washes • Cob Blocks • Hessian Rolls • Helfix Bars • Trowels • Paint Brushes & Paint Pads • Waxes & Lacquer • Water based Eggshell paints • Casein Paints – for Shabby Chic Look.
Specialists in building restoration
Tel: 01237 477431 | www.heritagecobandlime.com
and follow us on Twitter
@S4I_UK
Drainage News
2
is sponsored by Knotweed | please turn to page 8
Building Excellence
Self-building one or more properties to sell or rent?
20
Over years in the self build insurance industry
We’ve got you covered As a specialist self-build insurance provider, we know the needs of self-builders, and have tailored our product to the commercial self-builder, offering you the cover and limits you need to protect your investment. Put your project in safe hands, with the reassurance of a Zurich product, from having a self-build plot, through the build phase itself, and with the option of a Structural Warranty policy, providing 10 year protection. Speak to an expert about your specific insurance needs (Lines open Mon – Thurs 8am – 8pm, Fri 8am – 6:30pm)
Tel: 0800 230 0225 Email: enquiries@selfbuild.uk.com Web: www.selfbuild.uk.com
In partnership with
£5M Public Liability
|
£10M Employers’ Liability
|
Contract Works
|
Hired & Owned Plant
SelfBuild Insurance is a trading name of Trade Direct Insurance. Authorised and regulated by the Financial Conduct Authority (FCA)
|
Temporary Buildings TD0104-1605
Environmental News
Integrated renewable solutions EnergyZone, the one-stop shop for energy saving measures is a family run company with a combined engineering knowledge of over 50 years available in-house, helping to overseeing your project from start to finish. Combining sustainable and conventional systems, EnergyZone can design, supply and install integrated heating, power and ventilation systems providing true turn-key solutions for both new build and retrofit developments. Definitely not just another Solar company, our portfolio currently consists of; PV (Photovoltaic) PV-T (Photovoltaic Thermal) Battery storage solutions including Tesla ‘PowerWall’ Solar thermal Ground, water, air, solar assisted and multi-source heat-pumps Log burners Biomass boilers Mechanical ventilation and heat
recovery (MVHR) Underfloor heating systems for all types of floor construction Conventional Oil, LPG and Gas fired boilers Home automation solutions Electric Vehicle (EV) charging points On-going service and maintenance packages System efficiency reports Contact T +44 (0)1299 270011 sales@energyzone.co.uk www.energyzone.co.uk
Beam and Block Specialists One of Litecast’s most exciting additions is its new GT system, an innovative product made specifically for the development of thermally insulated structural ground floors. Using polystyrene panels and rails that fit seamlessly above and between the beams, this particular solution offers a simple installation and an immaculate finish that couldn’t otherwise be achieved without a separate layer of sheet insulation. Litecast Limited has gone from strength to strength ever since its establishment by its four Founders and Directors John Leroux, Kevin Hall, George Pickard and Mike Collison in 1998. Now a reputable market leader working within the concrete flooring sector, the Nuneaton-based business is renowned for its excellence in beam and block flooring manufacture and supply. Providing both 150mm and 225mm beams, Litecast boasts a varied offering of flooring solutions that can be employed in virtually any building project. Its impressive range includes polystyrene systems made from prestressed concrete beams and EPS blocks for thermally insulated structural ground floors, traditional beam and block for ground, upper and garage floors and a hard-wearing tray tile solution. Designs, quotations and technical expertise can also be supplied as part of the organisation’s fully comprehensive, customeroriented service.
The unique GT system is advantageous in the respect that it saves the client significant amounts of time and money, installation time is significantly reduced, and the multi-rail eliminates the need for any grouting between multiple beams. The result is a durable and thermally efficient floor that provides great U-values, eradicates cold bridges and reduces dwelling emission rates (DER). If you are interested in finding out more about Litecast and its new GT system or any of its other remarkable products then please don’t hesitate to contact the group today. Prioritising innovation and complete customer satisfaction, it is the company’s goal to develop products that will best fulfil the needs of installers and end users across the UK. T +44 (0)2476 356161 sales@litecast.co.uk www.litecast.co.uk
The new Litecast GT system is an innovation in thermally insulated structural ground floors. The system is completely unique. Unlike other insulated flooring systems the GT system has no requirement for a separate layer of insulation, significantly reducing the installation time of the floor. The GT System comprises of polystyrene panels and rails that work together to create a strong, thermally efficient floor that is easy to install. The grey panels retain heat whilst the white loadbearing rails offer support where it’s needed most – above the beam. The moulded panels and attached rails fit perfectly above and between the beams, ensuring a precise finish every time without the need for additional sheet insulation. The unique multi-rail eradicates the need for any grouting between multiple beams, saving both time and money on site. The EPS 250 white loadbearing rails, ensure that there is sufficient support between the beam and the structural topping whilst offering great U-values and eradicating cold bridges. The GT system achieves a range of great U-values, reducing dwelling emission rates (DER) significantly.
Please contact 02476 356 161, email sales@litecast.co.uk Visit www.litecast.co.uk
is sponsored by LeeSan | please turn to page 10
3
Flood Expo Review
The must attend Event for Flood Professionals Dubbed the world’s largest flood exhibition and conference, The Flood Expo is an unmissable industry-specific trade event which holds a prestigious status established across the globe courtesy of its main goals, which revolve around the monitoring and prevention of flooding in the most cost-effective and reliable ways.
At Environmental Innovations, we don’t claim to be able to eliminate flooding; but we would like to think that we can make a difference to this massive problem with our flood alarms. Flooding can arise from many sources including groundwater, storm water run-off, river rise, blocked drains and sewers (sewer flooding). It affects millions of people per annum and is a growing problem for both residential and commercial properties alike.
At this particular showcase you will find all of the latest and most operative solutions available for flood prediction, deterrence, defence, response and clean-up. The jampacked convention features panel debates, seminars and live demonstrations, all of which are supported and enhanced by the thousands of visitors and exhibitors in attendance. The 2016 edition is due to include 80 seminars and will open its doors to 150 suppliers and
approximately 2,500 visitors. Set to be even more successful than ever before, the Flood Expo will be returning next year to the ExCeL, London from 12-13 October to help industry specialists to explore the methods that can be employed to minimise – or where possible, avoid – the risk of potential flooding. You can find more information and order your tickets online now by accessing the website provided below. Contact www.thefloodexpo.co.uk
New CEMEX quarry of strategic importance for the South East market A new CEMEX quarry at Datchet, Berkshire, adjacent to the M4, is starting to supply essential sand and gravel to construction customers and readymix concrete plants in London and the South East. Datchet quarry will supply approximately 400,000 tonnes of material per annum and is of strategic importance in the supply chain to the region’s construction industry. With many quarries in the area now exhausted, Datchet will provide a locally sourced and more sustainable material. For the first time in CEMEX UK’s aggregate business, the plant was supplied by CDE Gobal with the new CDE M2500 modular plant representing a significant investment of £3million.It is designed to deliver finished material of sand, 4-10mm and 10-20mm stone and consists of a triple deck Prograde Screen, a CDE Evowash sand plant, conveyors and an oversize recycle system incorporating a Metso 200 crusher. The sand and gravel is currently being dug 800
4
Environmental Innovations flood alarms
We can generate and distribute advanced warnings to communities and businesses, using our flood alarm and level technology which can be used as a stand-alone warning system, or which can be used to create a turn-key package, utilising flow control, closure, and sampling devices. Flood gates, air-brick seals, and quick fix sand-bagging all take time to fit or close therefore there is little point in having a flood alarm on your front door step – it needs to be remote to give you time! A few additional tens of minutes warning can make all the difference when it comes to mitigating the effects. We have developed a surface mounted flood alarm that is specifically intended as a retro-fit that can be installed quickly, with no calibration on site and very minor installation works, on a solid surface, gravel or ballast.
What else can our flood alarms do? Switch and control Pumps Activate flow Diversion valves Activate and drive Sirens Activate GSM/SMS Messages Activate Wide area or on-site paging Activate existing alarm systems Interface with telephone dial Systems Interface with Scanning Telemetry Interface with your existing BSM/EMS system. T +44 (0)1279 600440 sales@environmental-innovations.co.uk www.environmental-innovations.co.uk
WIN THE FLOOD WAR WITH
READY AQUAWALL
RAPID ASSEMBLY FLOOD WALL SOLUTION metres from the processing facility and is transported by two field conveyors to the plant. The hopper, feeder and field conveyors have been recycled and were previously used in the operations at CEMEX’s Kingsmead quarry, which was exhausted and closed in June this year. Three contractors were involved in constructing the plant and different aspects of the site – Fentons, RMB Contractors and Vision Construction.
• Flood defence walls • Retaining Walls • Land reclamation • Sea defence walls for harbours and jetties • River bank reinforcement • Canal bank reinforcement • River/canal walls • Traffic partition walls
Based at Datchet are nine CEMEX and 11 contractor hauliers trucks for transportation of the material. In total there are 19 employees on site. CEMEX UK will be appearing at this year’s Flood Expo which will take place at ExCel, London 12-13 October 2016 and can be found on Stand F641. Contact T +44 (0)1932 568833 www.cemex.co.uk
cemex.co.uk/floodwall
is sponsored by Knotweed | please turn to page 8
Flood Expo Review
PROFESSIONAL RESTORATION The BDMA is the certifying body for damage management professionals and others involved in related aspects of property claims across the wider insurance industry. It participates in insurer led forums and wider research initiatives, and works with key stakeholders towards cross sector collaboration.
information which is used to inform a wide range of interested parties. This resource, which was most recently utilised during the Winter Storms of 2015-2016, is proving increasingly valuable in both private and public sectors. A series of Flood Leaflets which guide victims through the recovery and restoration process can be ordered via our website for distribution to property owners.
The Association contributes to setting industry standards and chaired development of the British Standard for Damage Management (BS 12999) by the British Standards Institution (BSI). In addition to providing professional accreditation in damage management disciplines for practitioners, insurers, loss adjusters, surveyors, project managers and others, the BDMA delivers education and training for the damage management, insurance and a number of other related sectors. A schedule of publicly available courses is published on the website, along with course details and online booking facility. Bespoke training packages can also be provided in-house to support corporate education objectives.
VikoFlood The VikoFlood range of temporary flood barriers provide a comprehensive approach to provisioning against flood damage and protecting assets, from commercial and domestic properties to specific assets, such as, electrical transformers and sub stations etc. The barriers utilise Vikoma International’s 50 years’ experience in manufacturing barriers for oil spill & pollution prevention and clean up. With growing concern in relation to rising water levels, increasingly wet winters and storm surges, Vikoma offer a
The BDMA is a Strategic Partner supporting the Prince’s Business Emergency Resilience Group (BERG), which is a Business in the Community (BITC) programme. Accreditation in most categories is by examination combined with specific criteria evidencing experience and commitment relevant to the qualification. A new category for those working in commercial property claims is to be added in the coming months. In surge situations the BDMA collates
T +44 (0)1858 414278 info@bdma.org.uk www.bdma.org.uk Proud to be a FLOOD EXPO SUPPORTING PARTNER in 2016 Stand F372 || Seminar – Theatre 2, Wednesday 12 October, 16:15
BEAVER FLOOD BARRIER SYSTEM
comprehensive range to those responsible for protecting areas at risk. The barrier solutions are provided in two forms of technology; Flood Guardian and Tubewall, a range of water and air filled booms designed specifically to combat against flood in various scenarios and the Boxwall temporary flood barrier. VikoFlood barriers are: Quick and easy to deploy Your flood mitigation one-stop-shop Designed and manufactured to ISO9001:2008 quality standards Flexible solutions that can be deployed on virtually any terrain Deployable in various combinations to protect valuable assets Easily stored and transported Available in standard lengths/designs or bespoke lengths/designed to suit customers specific requirements Fully tested at our in-house test facility. T +44 (0)1983 200560 www.vikoma.com
Using water to control flooding The Beaver Barrier Protection System from Geoline has frequently proven its worth in many emergency situations. Benefitting from fast assembly, easy installation and flexibility, the innovative flood barrier helps to prevent or at least reduce storm and flood damage and economic costs. The system consists of two PVC tubes laid side by side which are permanently joined together to form a flood barrier that can hold back up to 1,900mm of water. It is initially inflated, easily moved into the desired position and subsequently filled with water from a nearby water source or flood water – via a water pump. In recent years the Beavers efficient flood barrier systems have protected cities and their citizens, lands and buildings in over
150 cases. Over 80,000m Beaver flood barriers have been sold to date and are appreciated by Civil Defence teams for their convenience for dam building in flood situations. For more information contact Geoline on +44 (0)1372 434672, email info@geolineltd.co.uk or visit the website at www.geoline.ie
FAST ASSEMBLY | FLEXIBLE & EASY TO INSTALL GOOD STORABILITY | REAL LIFE DEPLOYMENTS The elements of the Beaver flood barrier are initially inflated, easily moved into the desired position and subsequently filled with water from a nearby water source or flood water - via water pump. The individual elements are joined together by a patented link system. This makes it possible to build flood barriers of any length, which conform to all types of terrain. Additional hold back capacity can be obtained by adding a further single tube on top of the twin element. The Beaver Barrier Protection System guarantees fast assembly of temporary flood barriers and their simple flexible use. The rapid and easy disassembly/removal, together with good storability are additional benefits of this reusable system.
Tel: 01372 434672 | www.geolineltd.co.uk is sponsored by LeeSan | please turn to page 10
5
Flood Expo Show Review
Introducing Geoflex sheet piles are made using a hard-wearing vinyl material that can withstand difficult weather conditions to maintain a long service life.
Soil improvement specialist Cofra is looking forward to attending Flood Expo 2016 this October to exhibit its unique suite of solutions whilst establishing its clear-cut environmental values and great depth of industry knowledge. Its groundbreaking Geoflex product is set to be a particular area of interest for the team, who secured a place at the largest flood-focused event at London’s ExCeL specifically to promote their latest innovations. As Cofra’s in-house material expert, Geotechnics BV is the mastermind behind the successful MebraDrain range and is responsible for the production and supply of other widely acknowledged synthetic materials such as Geoflex. Geotechnics BV, an independent production and trading company within the Boskalis Cofra Group, provides these plastic sheet piles as a contemporary alternative to tropical hard wood in applications such as earth-retaining constructions and bank protection. Available in two different profiles – Geoflex 210 and Geoflex 420 – the economically sustainable
Geoflex is advantageous because it remains unaffected by any natural substances apparent in the soil (rodents, salt and fresh water included). Other important benefits to note include lower transport costs, higher levels of production and a more lightweight installation process (as the easy to handle profile only weighs between 3 and 5 kg/m and the 210-C corrugated sheet just 11 kg/m2). When employed in conjunction with a hydrophilic swelling cord, Geoflex will form a barrier that is 100% waterproof. This is made possible with the incorporated recess, designed within the female clutch to accommodate the hydrophilic strip, which will swell upon contact with moisture to create a continuous seal. The product is subsequently an effective means of flood defence and groundwater contamination containment, as it increases height and reduces the permeability of existing earth flood bunds.
Building Worldwide on our Strengths Deep layer compaction in granular soils undertaken by Cofra utilising our CDC technique. With GPS setting out and information recovery on every blow, a soil density map is generated to target subsequent compaction passes. See us on stand M335 at the Marine and Coastal Exhibition 2016.
For more information, contact: 01293 871637 email: office@cofra.co.uk or visit www.cofra.co.uk
To find out more about Cofra, Geoflex or Flood Expo, then please consult the details below. Contact T +44 (0)1293 871637 office@cofra.co.uk www.cofra.co.uk www.thefloodexpo.co.uk
UK’s leading supplier of environmental, technical and flood services Unsure how the threat of flooding can affect your business? Want to find out more about flood mitigation and defence? Speak to the experts from Adler & Allan and the Business Emergency Resilience Group (BERG) on stand F312 at this year’s Flood Expo 2016, running from 12th-13th October at London’s Excel arena. With nationwide coverage, classleading capabilities and a range of patented innovations, Adler & Allan is the UK’s leading supplier of environmental, technical and flood services – with many years’ experience dealing with flooding incidents, including the major floods of 2015/2016. Adler & Allan helps protect some of Britain`s most valuable and important infrastructure assets. Leading R&D capabilities allow Adler & Allan to also offer specialist flood mitigation solutions including the patented JBAR® modular flood defence system and Adalline® 400 protective Polyurea coating, specifically designed to help organisations protect equipment, build resilience and longevity into their key assets, and minimise the collateral damage caused by flooding.
6
Through years of experience in dealing with a wide range of flood incidents, Adler & Allan has become a trusted industry expert in the areas of flood risk assessment, emergency flood response, flood defence, flood mitigation and post incident remediation services. Adler & Allan is a member of the Business Emergency Resilience Group (BERG), an initiative by HRH Prince Charles that helps flood affected residents crucial flood resilience grants. As part of the initiative, Adler & Allan has a dedicated tour bus and grant advice locations available throughout the UK, with flood advisors on hand to guide flood affected residents and businesses through the complete grant application process. Contact T 0800 592 827 www.adlerandallan.co.uk
is sponsored by Knotweed | please turn to page 8
Flood Expo Show Review
Geodesign Barriers become an EA framework partner The devastating storms and floods that hit the North during Christmas 2015 are what sparked the National Flood Resilience Review. With the aim to see what lessons could be learnt, the review established the importance of installing temporary flood barriers across the UK. The government, through the Environment Agency, has now significantly increased their stock of temporary barriers. Having worked closely with the EA since 2001, Geodesign Barriers have now officially become an EA framework partner and are supplying more temporary barriers for national deployment. The well-established company not only manufactures quality barriers but also assist with planning, surveys and training of staff. They have created effective flood protection for a number of renowned companies including National Grid, UK Power Networks, Northern PowerGrid, SSE and SGN.
available in dam heights of 0.45m, 0.65m, 0.80m, 0.85m, 1m, 1.01m 1.10m, 1.25m, 1.50m, 1.80m and 2.40m. Free standing and self-anchoring with no fixtures to the ground, the barriers are suitable for both home owners or large scale use and can be deployed on any ground surface. The flexible barriers adapt easily to local conditions, such as uneven ground, angles, kerbs, slopes and steps. They can also be deployed in water, if needed.
Geodesign Barriers have a long, proven record of successful flood emergency responses in the UK, across Europe and all over the world, since the mid 1990s. Around 68km of barrier have so far been distributed around the world, providing an effective protection against flooding. BSI Kitemarked since 2003, this easy-to-deploy, flat packed barrier is
With a lifespan of over 50 years and extra strong metal behind the plastic membrane, this barrier system can be used many times – giving excellent life cost value for money. Britt Warg, UK Manager T +44 (0)1793 538565 M +44 (0)7890 983239 britt.warg@palletbarrier.com www.geodesignbarriers.com
Intelligent Flood Protection that does not need any external storage space or logistics As towns and cities grow more of us are living near rivers. It increases the quality of life, creates green corridors, improves the air quality and reduces summer heat. This is what the inhabitants of the city of Rosswein, Saxony, confirmed for themselves and it is why they did not want a solid concrete wall as a flood protection measure.
With no valves to clog they are able to handle a wide range of liquids including dirty water and slurries containing solids and fibrous matter. They are not sensitive to viscosity, are not prone to gas-locking and provide a steady, low pulsation output. The pump design pays special
attention to robustness and resistance to aggressive and abrasive media. The lobes are coated with resilient nitrile rubber, which provides the sealing and is able to absorb the stresses of handling solids without damage. The casings are equipped with renewable wear plates to ease
maintenance and keep costs down. The simple, cartridge mechanical seals are robust and easy to maintain. Unusually in the lobe pump world, the pumping chambers are separated from the gear casing making it impossible for product to contaminate the gearbox in the unlikely event of seal leakage. The maintenance friendly, frontloading design allows all wearing parts to be accessed quickly and easily from the front, without any need to disturb pipe work. www.netzsch.com/en
Amari Austria ensures protection More frequently occurring heavy rain events demand higher requirements of flood defense systems for the effective property and landscape protection. The AMARI stop log systems have been developed with the specific purpose of avoiding this kind of flood damage and its aftermath.
AMARI Austria, with more than 40 years’ aluminium processing expertise, is a leading and qualified partner for flood protection systems. Through our own Engineering Department, we offer bespoke solutions to suit each individual need and situation. AMARI Austria’s mobile flood protection systems are based on 50mm or 100mm aluminium stop logs, which can be applied for effective property as well as landscape protection.
With ‘AQUABURG,’ they found a flood protection system that they could install and store in a 40cm wide concrete channel right onsite and that can be erected rapidly in case of a flood emergency.
Where, during the last flood in Rosswein in 2013, many sand
NETZSCH T1 and T2 series rotary lobe pumps are robust, versatile, positive displacement devices. They are self-priming, capable of up to 8m suction lifts and up to 10 Bar discharge pressure. Twelve models in three series provide flows of up to 1,000m3/h.
The biggest target for AMARI at the Flood Expo is to find potential partners, who are interested in distributing their product all over the UK and eventually to other countries.
The people of Rosswein were looking for an alternative that would leave the cityscape untouched but would still be rapid and safe to protect from the fast flowing ‘Freiberger Mulde’ with little notice time.
The flexible ‘wall’ consists of steel posts fixed but tilting insitu, an impermeable high-tech membrane and a pressureabsorbing stainless steel mesh. The AQUABURG does not use any loose parts. Everything is securely connected, so nothing can get lost and it can be erected without prior logistics and in any weather. Thanks to savings for emergency personnel, storage space and logistics (twice), the system becomes even more economical.
NETZSCH trailer-mounted rotary lobe pump can be relied on in an emergency
bags had to be prepared for hours with the help of many firefighters, there is now a flexible wall that will be erected within minutes with just two people. Please visit our stand F580. T +44 (0)1925 629393 info@huesker.co.uk www.huesker.co.uk
With the most recent innovations the AMARI aluminium stop-log systems provide unique advantages: Significant easier fitting of the profiles due to the weight optimised systems with dimensions 300/50 and 150/100mm Individual adaptation to the damming height due to the combination with the 200mm high stop log profiles Better balance of ground asperities thanks to the new 35mm high bottom seal Increase of stop logs’ contact pressure on the side seal through additional horizontal tensioning elements by
the 50mm system Bridging of bigger wingspread due to the use of a stainless steel rear support; the use of a central column is not necessary any more in several applications Shortest delivery time (few days from order date) Awarded the Seal of Quality by the European Flood Protection Organisation for the whole product range. We have been nominated for the Flood Award 2016 in the category ‘Resilience.’ We will be present at the Flood Expo 2016 and will be glad to meet you on our stand F632. flood-defence@amari.at www.amari.at
The flexible flood wall Specialists in marine civil and structural engineering Benefits: • No emergency logistics • No stocking required • Rapid and self-sufficient deployment • Robust with high impact resistance • All parts located securely on site.
And this is how it works:
Rapid and simple to deploy – time after time
Erected flood wall
Phone: 01925 629393 | Email: info@huesker.co.uk | www.aquaburg.com Fast and easy to erect – offering reliable service! AQUABURG Hochwasserschutz GmbH, 48155 Muenster, Germany
Variable height systems are available
Arch Henderson was formed in 1919 to offer specialist services in the design of harbour works, coast protection and ship repair facilities. While this specialisation in marine civil engineering works has remained, the firm is now multi discipline encompassing Architectural, Civil, Structural and Environmental Engineering Services. In addition, we undertake the Principal Designer (formerly CDMC) role on most of our projects. We operate throughout the UK and abroad with offices in Aberdeen, Glasgow, Inverness, Southampton, Lerwick, Dundee, Thurso and Port Stanley in the Falkland Islands. Although operating as a multi-discipline organisation, each individual discipline delivers their specific service autonomously. This is linked by a shared set of principles, administration and quality assurance procedures. Whilst we are able to offer our clients many advantages by providing all services on a project collectively, each area of expertise can operate independently and has built up their individual reputations on this basis. This reputation is then further galvanised by our strength as one multi-discipline consultancy.
Please visit www.arch-henderson.co.uk T +44 (0)141 227 3060 | E glasgow@arch-henderson.co.uk
is sponsored by LeeSan | please turn to page 10
7
Contamination Expo Series Review
Cutting Edge Innovations & Concepts If you are a contamination professional looking to find unique solutions and innovative technologies, then there is only one show that you simply must attend. The Contamination Expo Series 2016 is a new trade event launching this year that will enable exhibitors and visitors alike to liaise in a corporate setting whilst experiencing extensive workshops and seminars conducted by a range of important industry specialists. As the UK’s leading event of its kind, the Contamination Expo Series will comprise a comprehensive programme covering all aspects of land, water and air contamination. This includes elements such as clean air technology, building contamination, marine contamination, land, fresh water and toxic waste storage transportation & disposal. Attendance at the Contamination Expo Series will introduce
you to an array of exciting products and technologies. If you are interested in participating, or if you would like to find out more about this unmissable networking opportunity, then please don’t hesitate to go online today. Tickets are free to order; all you have to do is fill in your personal details on the corresponding webpage. The first edition of this much anticipated show will take place from 12-13 October at London’s ExCeL. www.contaminationexpo.co.uk
Japanese Knotweed Ltd at Contamination Expo Series 2016 Japanese Knotweed Ltd are exhibiting (Stand No. C124), and providing a seminar at Contamination Expo. The seminar and stand, manned by experienced professionals, will provide an informative insight to the problem of knotweed, and to the solutions for dealing with it. Japanese knotweed can cause structural damage. This is however relatively rare, but it does present a significant loss of amenity use to a property. The ground containing living or chemically treated knotweed is contaminated by the plants rhizome. If this ground is disturbed, the plant can grow and spread. If the same ground is removed from site, it is classed as controlled waste under the Environmental Protection Act 1990.
knotweed is planned for disturbance under development, then in nearly all cases it will require instant eradication by way of excavation. Japanese Knotweed Ltd will work with our clients to devise the most effective and economic method of remediation, utilising either on or off site disposal of knotweed waste.
Property owners and developers therefore need to be aware, and they have a duty of care in the correct management, treatment and disposal of this contaminate. For construction companies, if ground containing Japanese
Japanese Knotweed Ltd (www.japaneseknotweed. co.uk) has vast experience in the identification, management, control and treatment of this non-native invasive plant. We are here to help individuals or companies in the eradication of Japanese knotweed, so contact us today: +44 (0)333 2414 413 or email: info@knotweed.co.uk.
Ecologia: Experts on the ground Ecologia – Cost-effective and innovative solutions for investigation, assessment and remediation of sites affected by contamination. Ecologia is a multi-disciplinary, specialist contaminated land consultant/contractor that provides advice and undertakes site investigation and remediation projects across the UK and Europe. We also have an established and excellent reputation for the construction and operation of in-situ remediation plant for soil and groundwater.
Ecologia's primary objective is to provide remediation design and sustainable remediation solutions to a wide number of customers from the public sector, property development and construction companies to the chemical and petrochemical industry. We also offer specialised support to insurance companies/loss adjusters dealing with environmental claims ranging from small-scale domestic spillages to major industrial incidents. Our Head office is in Kent, with offices strategically located across the UK and in Italy.
Our core service areas are: 1) Contaminated Land and Groundwater 2) Soil and Groundwater Remediation 3) Services to the Insurance Industry 4) Emergency Response. Our work with several leading Loss Adjusters has developed out of our reputation for attention to detail, regard for the individual needs of our clients, and also our expertise in dealing with Regulators and the public. Contact T +44 (0)1795 471611 info@ecologia-environmental.com www.ecologia-environmental.com
Asbestos ALERT, the world’s first real-time warning device Coming soon... Asbestos ALERT, the world's first real-time warning device for airborne asbestos that will offer a first line of defence helping prevent prolonged inadvertent exposure to toxic airborne asbestos. As asbestos legislation in the UK and Europe continues to move towards greater monitoring, control and ultimately the safe removal of asbestos, the market is ready for new disruptive technology such as the Asbestos Alert. Whilst ALERT cannot eradicate the problem of asbestos, it will arm professionals with a warning device to help improve safety and reduce the risk of exposure for future generations. Alert was developed initially by a consortium of experts which included:
within 3 minutes to 99% confidence, employing a laser-based technique that takes advantage of the magnetic properties of the mineral.
The Select Group, the University of Hertfordshire, TICA and ACAD et al. It's patented, disruptive technology was designed to be lightweight, portable, affordable and to rapidly detect local short-term increases in asbestos fibre concentrations resulting from mechanical abrasion (drilling, sanding, demolition etc). It currently operates with a sample flow of 0.1 litres/minute and analyses 600 particles a second making an analysis
To accelerate market launch Alert Technology are raising equity investment and will be offering shares in the company to the crowd publically via Crowdcube – the UK's first and leading online investment platform authorised and regulated by the UK Financial Conduct Authority (FCA). To find out more about the Asbestos ALERT, future availability and how to become a part of Alert's future, please visit us on stand C650. Contact T +44 (0)1803 540154 info@asbestos-alert.com www.asbestos-alert.com
Derwentside Environmental Testing Services (DETS) Established in 1999, DETS offer a wide range of analytical services for the environmental, construction, waste, fuel and engineering industries, and are accredited to ISO 17025 and MCERTS, plus ISO 14001, and OHSAS 18001. Combining a modern, well equipped laboratory, with highly skilled and dedicated staff, we can ensure an excellent and flexible service to meet your requirements. We offer a full range of environmental analyses, including: Heavy metals either by ICP or XRF Speciated mercury Cyanide and phenols Anions: including sulphate, phosphate, chloride, nitrate and
Leach testing to WAC or EA specification
nitrite Volatile organic compounds Total petroleum hydrocarbons Polyaromatic hydrocarbons Semi volatile organics, including PCBs, pesticides, or a screening suite of 900 compounds Loss on ignition: accredited for HMRC waste classification
DETS are recognised as a centre of excellence for the analysis of asbestos in soil, and hold accreditation for: Identification of asbestos Quantification of asbestos, including free fibres Water absorption to determine licensable or non-licensable material NEW – respirable fibres in respirable dust (accreditation pending) to aid risk assessment on site. T +44 (0)1207 582333 info@dets.co.uk www.dets.co.uk
ALS Environmental to Co-Sponsor the SCLF Annual Conference ALS Environmental are delighted to announce that we will be cosponsoring the Scottish Contaminated Land Forum (SCLF) on Wednesday 7th September at Strathclyde University. The SCLF conference is the 7th Annual Conference, entitled ‘Advances in Land Contamination Assessment and Remediation’ promises to be an intriguing insight into the challenges present in the Scottish market. The SCLF Conference is one of the highlights on calendar for the Contaminated Land sector in
Scotland. ALS Environmental are proud to once again support the annual SCLF conference and will be represented by Mark Aristidou from our Business Development team. ALS Environmental have been
supporting the Contaminated Land sector for over 15 years from our Centre of Excellence in Coventry and have recently added drop-off locations in Scotland to support our Soils Testing growth in across the UK & Ireland. The SCLF conference will contain an invigorating mix of presentations from a variety of contributors representing all sectors of the contaminated land industry. T +44 (0)2476 421213 info.ukenviro@alsglobal.com www.alsenvironmental.co.uk
Cofra: Supplying & Installing Worldwide Expert solutions for decontamination Cofra’s in-house materials experts, Geotechnics BV, is an independent production and trading company within the Boskalis Cofra Group. Geotechnics BV’s primary focus is on the production and sales of the MebraDrain range and other synthetic materials. The proven partner in soil improvement has been developing its techniques ever since its establishment in 1923, completing installations for various applications in a range of ground conditions across the globe. The company’s work surrounds the development and practice of consolidation and compaction techniques for cohesive and granular soils. These methods are devised using high tech pieces of equipment and are supplemented by
8
the refined skillsets of Cofra’s very own geotechnical department. Operating proactively, Cofra is now a globally renowned soil improvement contractor with a philosophy centering on innovation, reliability and professionalism. The group boasts a decorated background in all associated areas, including in-house manufacturing, technical expertise and direct installation. Cofra’s wealth of experience, innovation, in-house manufacturing, commitment to technical expertise and directly employed installation teams ensure the successful delivery of your project. T +44 (0)1293 871637 office@cofra.co.uk www.cofra.co.uk
SMH is delighted to be exhibiting at this year’s Contamination Expo. SMH is committed to delivering expert solutions for decontamination across a range of hazards and industries, from asbestos to wood dust, construction to demolition, and so this Expo is an ideal showcase for what we can do. Our stand will introduce the products and services that our national network can deliver to help those who encounter hazards in the workplace towards eversafer working environments and practices. This ranges from specialist decontamination equipment – mobile and static shower units for sale or hire, industrial air and water filtration units, H-type vacuum cleaners – to expert training, including UKATA, IATP and BOHS approved asbestos
courses, and technical support such as site audits and consultancy. We will have demonstrations of our Pumped Filter System, designed specifically to move and filter large quantities of contaminated liquid quickly and safely, and an H-type wet/dry vacuum cleaner from Hilton Industrial Vacuums, ideal for commercial and industrial clean up. In addition, our CEO, Oliver Smith, will
is sponsored by Knotweed | please turn to page 8
be presenting about the importance of monitoring decontamination sites, exploring in particular the reasons behind critical control measures. This will tie in with the demonstration of a range of instrumentation available from SMH, including the HS-FC6 Fibrecheck unit, an affordable realtime fibre monitor, aimed at sites with airborne hazards, especially asbestos, but also ideal for measuring the risks from respirable fibres in any dusty work environment. Oliver can be heard on Wednesday at 14:00 in Theatre 13, and again on Thursday at 12:30 in Theatre 12, while the rest of the SMH team can be found on Stand C540 – so come along and say hello! Contact T +44 (0)191 456 6000 www.smhproducts.com
Marine & Coastal Show Review
Global Solutions for Marine & Coastal Projects On the 12th-13th October ExCel London will open its doors for Marine & Coastal Civil Engineering 2016. Run alongside the Food Expo, the show is the UK’s leading event in presenting global solutions and innovative concepts to professionals working in hard engineering, coastal and river management, subsea engineering and flood risk authorities. The world’s leading coastal engineering companies, alongside an extensive seminar and workshop schedule, will highlight new and effective ways to design and produce sustainable solutions to everything from climate change to maintaining coastal defences. Exhibiting at the show will you
Electrical Drainage News
exposure to an audience of over 2,000 professionals working in hard engineering, coastal and river management, subsea engineering, and flood risk authorities as well as established names and the opportunity to talk to these highly targeted visitors on a face-to-face basis. Discover the latest research, products and services on the marketplace to help in the development of sustainable civil infrastructure, including sea defences, flood protection, water treatment systems and roads. For more information, visit the website at: www.mcceexpo.co.uk
HUESKER SoilTain® Tubes and Bags HUESKER is a market leader in the manufacture of synthetic products used within the Civil Engineering industry, primarily within the Hydraulic and Geotechnical sectors. Our range of innovative products specifically developed for use in the sludge dewatering, scour protection, filtration, erosion control and marine structures markets makes us an ideal partner for Contractors, Consultants and Clients alike.
NVQ 2356 & NVQ 2357 for JIB Gold Card We specialise in training of the NVQ 2356 and NVQ 2357 which will enable you to apply for your JIB grading (Gold Card).
Dewatering of contaminated sludges
and sediments Construction of groynes, breakwaters and revetments Shoreline stabilisation and reinstatement.
The dewatering of contaminated sludges and sediments is a topical issue and due to the environmental drivers behind many of the associated projects it is a topic which demands fool-proof, comprehensive solutions. Please come and visit us to see and hear more of our latest news: STAND F 580. T +44 (0)1925 629393 info@huesker.co.uk www.huesker.co.uk
Specialists in marine civil and structural engineering
These NVQs are completed online with our efficient and easy to use e-Portfolio system, OneFile. This means that you can complete the NVQ at a time of your choosing and in the comfort of your own home. Most people comfortably complete the NVQ between three and eight months. You will be supported by a team of highly professional trainers and assessors who will provide you with support, advice and guidance on how to successfully complete the NVQ. You will also receive one remote site assessment wherever you are working and this assessment contributes towards the completion of your NVQ. See some of the testimonials we have received from candidates who have already completed their NVQ with XS Training and have now received their JIB Gold Card.
Contact 07985 793094/07507 718465 Email: enquiries@xstraining.com www.xstraining.com
As one of the exhibitors at the Marine and Coastal Civil Engineering Expo we are promoting our range of our SoilTain® Tubes and Bags which can be used in the following application sectors:
Arch Henderson specialises in understanding the needs of port and harbour clients and is recognised for dynamic and creative design work and for consistency of service by its clients. Established in 1919, Arch Henderson is a British consultancy specialising in the design of maritime projects from small scale slipways and pontoons up to £200 million infrastructure developments. Large scale projects in the past three years include the Nigg Enterprise Quay (£19 million), Invergordon (£20 million), BAE C9 Shipyard Redevelopment (£140 million), BAE IEI Shipyard Development (£35 million) and the new Nigg Bay development in Aberdeen (£270 million). Principal offices are located across the UK in Aberdeen, Glasgow, Caithness, Southampton, the Northern Isles and in the Falkland Islands. The firm has specialist skills in marine civil engineering, coastal engineering, geotechnical engineering, heavy mechanical engineering (moving structures) and
is sponsored by LeeSan | please turn to page 10
industrial structural engineering. Recent projects include deep quays, dry dock redevelopment, marinas, new linkspans/ Ro-Ro facilities, diving surveys (in-house) and shipyard/boatyard infrastructure development. Clients come from framework consultancy agreements such as CMAL, BAE Systems and Peel Ports as well as acting as port engineer for several significant ports in the UK such as Aberdeen Harbour and Montrose Port Authority and for various D&B contractors. www.arch-henderson.co.uk
9
Commitment to Excellence
The UK’s Leader in Marine Sanitation ensure all of the necessary aspects are covered as appropriate.
LeeSan has been selected as a company most deserving of our prestigious Commitment to Excellence profile, we are delighted to announce at Building Solutions UK. The Midlands based business was founded over four decades ago and has gone from strength to strength since its establishment. Having originally concentrated on serving the leisure and marine markets and sewage pump installations, the organisation has since diversified into the welfare, domestic, industrial and commercial sectors due to ongoing success and demand. “Our company offers expertise in all manner of mobile sanitation and clean water boosting works,” commented Karl Sutcliffe, LeeSan’s newly appointed Technical Sales Director. “We offer a worldwide spares delivery and can advise on specifications of mobile sanitation if required. Our aim is to supply, quote and advise on all aspects of the pumping process for all mobile welfare facilities. “I would say that we stand out from our competitors because of our 40 years of experience – dealing and handling the products we supply – and providing full back up and support whilst ensuring our staff members are set to take any incoming calls should a customer need any help.” The LeeSan online store, which is accessible at www.Leesan.com, impressively boasts the largest single source of marine sanitation
equipment, parts and service kits on the internet. The vast inventory of products can be assorted into the following categories: toilets, one stop pump shop, hoses/pipe & fittings, tanks, toilet spare parts, pump spare parts, consumables, tank accessories, self-pump-out kits, toilet & tank packages, service kits, pump-out accessories, flush water treatment, water systems, Bilge water filtration, pump-out equipment, seats & lids, specialist tools and waste transfer systems.
Please feel free to contact a member of the team using the telephone number and email address supplied below. Alternatively, you can browse the full range by visiting the company website, navigating the pages by means of brand or product category to see for yourself the many options available. Part numbers or descriptions can be entered into the search box for direct results and recommended accessories will be shown to enhance equipment performance and longevity. T +44 (0)1295 770000 sales@leesan.com www.Leesan.com
Building Products News
LeeSan branded components are readily available in stock and there is also a diverse range of spare parts and accessories from all of the leading manufacturers stored to ensure that every client remains assured that their individual needs can be met accordingly. Operating from its 6500 sq ft warehouse at Fenny Compton in Warwickshire, the company is well positioned to facilitate its wide-ranging customer base with its central location and close transport links. With LeeSan, a brand that holds membership with the British Marine Federation, you can trust that you will receive a speedy solution after consulting with a friendly and informed company representative. The industry experts are not just suppliers; as manufacturers and aftersales support providers they can offer a comprehensive service to
Heritage Cob & Lime Supplier of Traditional Building Products • Lime Putty
• Lime Mortars • Lime Plasters • NHL
• Lime Washes • Cob Blocks
• Hessian Rolls • Helfix Bars • Trowels
• Paint Brushes & Paint Pads • Waxes & Lacquer
• Water based Eggshell paints
• Casein Paints – for Shabby Chic Look.
Specialists in building restoration
Tel: 01237 477431
Unit 20, Bideford Business Park, East-the-Water, Bideford, EX39 1GC Please visit our website for full range of products
www.heritagecobandlime.com
10
is sponsored by Schneider | please turn to page 11
Commitment to Excellence
Saving the world from mediocre bar stools! Building Solutions UK is extremely pleased to present Langs Quality Furniture with its richly deserved Commitment to Excellence profile for their dedication to providing the highest quality products and services to customers throughout the UK. The renowned company has been providing exceptional, customised bar stools since 1999. The established online web shop was set up by entrepreneur Graeme Lang who previously worked for a large private company selling furniture to pubs, clubs and hotels. After receiving a great deal of customer enquiries for bar stools to be customised for home and kitchen use, Graeme discovered a real gap in the market for High Quality Breakfast Bar Stools Starting life as a basic website, before Google was even invented; the business has experienced a great deal of changes over the years. Today, Langs Quality Furniture offers customers an easy to use, efficient online ordering system that allows users to view every style, colour, finish and base available and design their very own, bespoke stool using the revolutionary app.
Now a renowned specialist supplier of innovative bar stools as well as matching dining tables and chairs, Langs, under the trading name of Breakfast Bar Stools, boasts a large portfolio which can be delivered quickly and efficiently to anywhere throughout the UK and abroad. “Our wide choice of colours, finishes, legs and materials are guaranteed to suit everyone’s requirements,” commented Graeme. “The range of high quality, attractive stools has satisfied a large number of customers over the years, including many renowned companies and individuals. Our customers love the variety
of choice and the longevity of our products as well as their extreme comfort and stylish look.
your stools back up and running in no time. http://www.houzz.co.uk/pro/graemelang
“Designed for those that require luxury and reliable furniture which can be enjoyed for many years, our Italian made bar stools also come with a 2 year guarantee. They are of far better quality than competitor brands which are cheaper, but made with second-rate materials and likely to fall apart within 6 months. With us, people enjoy sitting in comfort, instead of perching uncomfortably!”
“We always receive fantastic feedback from our customers, many of whom have experienced faulty, uncomfortable chairs from cheaper brands and realised Langs is the way forward!” Graeme explained. “Our matching furniture is a huge hit amongst customers as many people are opting to have open plan living areas and the matching Chairs and Bars Stools pulls the whole scheme together.”
The app – which can be found at http:// www.seatingmyway.com/app/chairs – allows you to create your very own bar stool or matching chair, choosing your preferred options and see the finished piece before you commit to order. You are able to experiment with different colours and designs to create a stool or chair that is completely unique to you. To seek ideas and inspiration from those that are already enjoying Langs Quality Furniture in their homes, visit houzz.co.uk. Similar to Pinterest in style, the website is dedicated to home décor, both interior and exterior, and
enables you to save images to your idea book to decide on the perfect furniture for your home. You can see Langs furniture in action and witness how matching designs can truly enhance the look of your home and lets your personality shine through your décor. Glowing reviews for Langs Quality Furniture can also be found on Houzz which comment on their superior quality, excellent service and their outstanding aftercare support where they fix or replace occasional faulty or damaged components as soon as possible in order to get
T +44 (0)141 423 8283 info@breakfastbarstools.co.uk www.breakfastbarstools.co.uk Instagram – https://www.instagram. com/thebarstoolman YouTube – https://www.youtube.com/ user/thebarstoolman Pinterest – https://uk.pinterest.com/ thebarstoolman Facebook – https://www.facebook.com/ TheBarstoolMan Twitter – https://twitter.com/ukbarstools
Building Products & Automation News
Building Automation – Creating Smarter Homes for Smart Consumers By Asad Zaidi, Channel Marketing Engineer, Schneider Electric
Research predicts that there will be 50 billion connected devices worldwide by 2020. That assumption alone indicates that the smart revolution is literally on our doorstep. In fact, connectivity is changing everything. Now we have the opportunity to drive unprecedented levels of interaction, comfort and efficiency within our homes, like never before. What’s more, a decrease in the price of technology and changing customer expectations, has driven smart homes and automation from an aspiration to a demand. Consumers today expect to be able to control their household energy use, from lighting and heating through to all other electrical devices in their home, from a single hand held device. This marks the new era of smart, connected homes. Schneider Electric has recognised this trend and together with architects, engineers, electricians and other partners, is providing this connectivity to homes through solutions like the C-Bus Wiser home control systems. This automation technology connects a wide variety of devices, putting the power back in the hands of the consumer to control all aspects of their home and create the perfect environment for any moment. By embracing home automation technologies, home owners can program settings so that the temperature is perfectly set for their arrival or have the lights go
is sponsored by Langs Quality Furniture | please turn to page 11
up as the sun goes down, even unlock the front door with a smartphone; the possibilities are endless. There are different types of systems in the market capable of automating a single product like cameras or heating, but a fully integrated system can incorporate all of these disparate systems and combine them into one single point of control or an application. Doing so, C-Bus Wiser’s user-friendly interface allows residents to control every appliance within the household, customise settings to adapt to their needs and achieve savings of up to 30% on annual energy costs. Thanks to numerous stories regarding global warming and rising energy costs, consumers are increasingly worried about keeping their utility bills in check and maintaining energy efficiency. Driving success in this aim forward is all about controlling habits and looking for ways to lower the carbon footprint, but there doesn’t have to be a compromise on style and aesthetics. When so much of our lives are already integrated with technology, adding it into the home environment using automation systems is a great way to support people looking for connectivity to power energy efficiency from the comfort of their home. T 0033 141297000 www.schneider-electric.com
11
Heating, Ventilation & Air-Conditioning News
Bigger and better JMv axial fan range from Fläkt Woods Fläkt Woods, a leading manufacturer of ventilation and air movement technology, has announced the expansion of its revolutionary JMv axial fan range, which includes a choice of sizes and is, most pertinently, heralded as even more efficient than the original. A new and improved design means the axial fans are capable of saving 27% of running costs, which is 3% higher than the initial models launched just last year. The extended offering will include five additional sizes, expanding the range up to 1,000mm in diameter (available sizes now: 315mm to 1,000mm), which can deliver increased performance due to the incorporation of an impeller spinner in the larger sized models. This is all whilst using less power and saving an estimated 113 tonnes of carbon dioxide
emissions throughout its operational life. Specifiers and installers can gain the aerodynamic advantage by using the Fläkt Woods Advanced Fan Selection Tool to select the best possible product. The product selection tool makes choosing the most energy efficient solution easy, ensuring that new installations benefit from the smallest possible carbon footprint, making it easier to comply with the most stringent green credentials required to achieve BREEAM credits. Fläkt Woods develops, manufactures and distributes ventilation and air climate products, as well as system solutions for commercial and industrial applications. For more information on the complete range of fans and other ventilation products from Fläkt Woods, visit: www.flaktwoods.co.uk
Serving the RACHP industry The Air Conditioning and Refrigeration Industry Board, otherwise known as ACRIB, is a central hub for a large crosssection of organisations either working for or interested in the air conditioning and refrigeration industry. The esteemed trade body operates via a pool of dedicated member organisations endeavouring to represent the movements of specialist manufacturers, distributors, contractors, consulting engineers, specifiers, end users, training providers and researchers. It also acts to promote the needs of those striving towards the environmentally friendly and cost-effective provision and utilisation of refrigeration, air conditioning and mechanical ventilation equipment. The group has three core areas of focus: environment & energy, education & training and technical safety & standards. Its main activities include advising UK government
authorities, running a recognisable safe refrigerant handling certification scheme, working alongside SummitSkills on the development of national qualifications and sustaining active membership of the European Partnership for Energy and the Environment (EPEE). ACRIB is also responsible for the coordination and representation of its members, liaising with associated industry sectors on matters of importance and common interest. This involves responding accordingly to concerns such as system efficiency & safety, performance standards, food safety and safety at work. l.whittam@welplan.co.uk www.acrib.org.uk
Contact our Sales Team on: 01752 894777 bodmin@climatecontrolsandspares.co.uk
WE’RE
EXCITING NEWS!!! WE HAVE A NEW BRANCH OPENING... IN BODMIN, CORNWALL Heating – Air Conditioning – Refrigeration Fully Stocked Branch Conveniently located just off the A30 Air Conditioning Gas Condensing Boilers Zeas Refrigeration
Condensing Units Evaporators Monoblocks
Available from stock
Daikin Air Conditioning Split Systems Accessories & Spares – Refrigeration & Heating Copper – Insulation Brackets – Condensate Pumps – Chemicals Compressors – Refrigeration Controllers – Heating Controls – Guards Refrigeration Spares – Pipe Support Systems Tools & Equipment
NATIONWIDE DELIVERY
For more information, please visit www.climatecontrolsandspares.co.uk 4C Carminnow Road Industrial Estate, Bodmin, Cornwall PL31 1EP
12
is sponsored by Schneider | please turn to page 11
OPEN
Landscaping, Urban Design & Paving News
Showing off at The Flower Shows Practicality Brown Limited are instant landscape specialists with a range of semi-mature trees, elegant topiary and hedging plants; including Elveden Instant Hedge™ which is a true Instant Hedge being a mature flat-sided UKgrown hedge available up to 1.8m in height. They have everything to present a mature garden finish immediately, which is just one of the reasons that the Buckinghamshire based company worked with a number of garden designers and exhibitors at both RHS Chelsea and Hampton Court Flower Shows. Practicality Brown have been operating for more than three decades in the horticulture and forestry industries as Sales and Business Manager, Graeme Jenkins explains, “Customer satisfaction is at the heart of what we offer; we aim to ensure our customers have the right product for their project whether it’s a large scale development or simply screening a neighbour’s window.’’ The RHS Flower Shows showcase the best in garden designs and Practicality Brown
CABLE FENCE
For an uninterupted view
Systems
Standard Kits are available for purchase from Amazon & Ebay in 3, 6 and 12 metre variants and individual components can be bought from the website in the form of End Collar Kits, Through Collar Kits, Round Post Collar Kits, Round Through Collar Kits, Angled Collar Kits, 4mm Cable and Tensioner & Cutters.
For more details, see: www.pracbrown.co.uk, twitter @PracBrownLtd, facebook or Instagram.
perimeter and the creation of Birmingham’s version of the ‘Spanish Steps.’ The paving was installed using Ultrascape's BS 7533 compliant Pro-Bed HS fine bedding concrete, Flowpoint rapid setting grout and Pro-Prime slurry primer. Construction was carried out in difficult circumstances as the station was fully operational throughout the project. It is the busiest interchange station in the UK with trains departing every 37 seconds and over 140,000 passengers passing through daily.
Cable Fence Systems Ltd is a UK based company specialising in the design and manufacture of a high quality stylish stainless steel cable fencing system suitable for indoor and outdoor application. Because of its versatility, the remarkable product can be used with square or round, wooden or steel posts for boundary fencing and trellising or as indoor contemporary staircase infills or dividers from one area to another.
Other benefits include a full supply of fittings, no wastage (as the cable is cut onsite) or unsightly tensioners and the fact it is great value for money (being maintenance free). In addition, the unique cabling system provides great aesthetic appeal, as a structure specifically designed to allow an unspoiled view of a property’s surroundings.
At Chelsea, David Austin Roses won Gold in the Pavilion and Papworth Trust were awarded a Silver Gilt medal for their acoustic ‘Together We Can’ artisan garden, designed by Peter Eustance and percussionist Dame Evelyn Glennie.
Ultrascape helps to deliver World Class Transport Hub
Beautiful, Strong Stainless Steel Cable Fencing
Manufactured from marine grade stainless steel, the components and 4mm cabling are widely acknowledged for their corrosion-resistant, durable and weatherproof qualities. Because no special tools are required and a comprehensive information guide is supplied, installation is made quick and easy. There is even an online video accessible to those in need of further support.
contributed to a number of medal-winning gardens. Elveden Instant Hedge, topiary elements and hedging plants were supplied which provided green screen backdrops for these great designs.
Ultrascape's BS 7533 compliant mortar paving system has played a major role in helping to transform one of the UK’s busiest train stations. The long awaited redevelopment of Birmingham New Street station has transformed what was previously a dark, overcrowded site with poor access for passengers, into a prestigious gateway to the UK’s second city. Highlights include more space and better facilities for passengers, brighter and clearer platforms, a stunning new station facade and a grand concourse enclosed by a light filled atrium. Work was carried out by one of the UK’s premier concrete frame contractors, MPB Structures Ltd. It included reinstating existing station platforms as well as installing new structures, hardscaping around the station
Ultrascape Flowpoint grout was ideal as its rapid setting properties enable areas to be open to foot traffic in just 1 hour, keeping downtime and disruption to a minimum. Simple to use, requiring only the addition of water on site, it is poured over the area and washed clean, filling all joints evenly, without staining. Ultrascape Pro-Bed HS provided a perfect bound base for the pavers. It can be laid up to 75mm in one pass, with greater depths achievable using successive layers. The fast strength gain of Pro-Bed HS allows pedestrian areas to be trafficked in as little as 12 hours. Ultrascape Pro-Prime was applied between the paving elements and bedding mortar. T +44 (0)1827 871871 www.ultrascape.co.uk
‘Floral Features’ The Mermaid Conference & Events Centre with its LivePanel living wall being a fabulous, fragrant feature, sits overlooking the north bank of the River Thames.
Please visit: www.cable-fence.com Contact 01535 667077 | Email: sales@cable-fence.com
Taking an active part in the City Of London’s Clean City Awards Scheme, The Mermaid is raising the profile of responsible waste Just taken after installation in November 2015 management and recognising The modular LivePanel system is ideal for and rewarding good practice such an installation. The modules feature by encouraging businesses to ‘Reduce, a specially developed substrate designed Reuse and Recycle.’ Which resulted in a to enable the plants to establish and thrive. Platinum Clean City Award for 2015. The panels are stacked onto the face of a building or wall and secured by an The Mermaids LivePanel living wall system aluminium frame. With a fully integrated was installed by Hedera Screens in 2015, Irrigation and drainage system. the system measuring 80 sq m features a stunning mix of plants, including Campanula T +44 (0)845 504 8211/ Poscharskyana, Heuchera Fire Chief, +44 (0)1530 560550. Heuchera Paris, Heuchera Marmalade, info@hederascreens.co.uk Bergenia Eroica, Lonicera Nitida Maigrum www.hederascreens.co.uk and Pachysandra Terminalis.
is sponsored by Langs Quality Furniture | please turn to page 11
13
Heating, Ventilation & Air-Conditioning News
Building and Engineering Services Association The Building and Engineering Services Association (BESA) is the UK’s leading trade organisation for building engineering services contractors. Founded in 1904, the association adds value to members’ businesses by providing quality services, promoting excellence and shaping the commercial environment through representation and leadership. BESA represents the interests of firms active in the design, installation, commissioning and maintenance of heating, ventilating, air conditioning and refrigeration, heat recovery hot and cold water supply, fire protection/ sprinkler systems, pipework, ductwork,
plumbing (excluding drainage), energy management systems and facilities services.
Need not look any further when Verve ventilation is all you need
Members are subject to regular, third-party competence and assessment to ensure their technical and commercial competence. They also benefit from access to a wide range of services, which are carefully tailored to their needs, and which help them to build better and more profitable businesses.
44 Range from 150-2,000m3/h 44 BMS and volt free connections 44 Group control and CO2 sensor
The association is also leading the sector's efforts to deliver a more sustainable built environment through technical guidance, training and supporting new ways of working.
44 Auto summer bybass 44 7 day timer, smart alarm & defrost
www.thebesa.com
44 Competitively priced
Offering the Best HVC Solutions
44 DC Fan Motor 10 Speed
(finance, sales, marketing and legislation included), Gallant offers training in the latest HVAC technologies, an opportunity made available for customers by means of an upto-the-minute showroom and training school.
Gallant Air Conditioning is a contemporary company specialising in the distribution of high quality HVAC products, covering both the air conditioning and ventilation segments with its range of exceptional solutions. The business, which is ideally positioned in Mansfield in the East Midlands with close links to the major UK motorways, has enjoyed steady growth since its establishment. This success has in turn prompted further expansion, with the team investing in further facilities. Gallant’s hard-working directors and staff members share over 150 years of industry experience, which makes the group strongly competent in the facilitation of individual clients’ HVAC needs. Their refined capabilities include designing, commissioning, application, installation, maintenance and aftersales services in the form of technical expertise, internal support and spares identification. As well as providing climate friendly, energy efficient solutions for any business area
In terms of suppliers, the organisation is incredibly pleased to have secured partnerships with two of the most notable global producers of air conditioning products: Samsung and Mitsubishi Electric. Gallant is therefore a specialist distributor for Samsung, the major mobile phone and television brand, and a value-added reseller of Mitsubishi Electric air conditioners and ventilation units. HOLTOP are the partner of choice for Gallant in relation to ventilation equipment, selected specifically for their reliability and quality. Together, the branded products form a comprehensive portfolio that can assist Gallant in its quest to successfully serve any customer with particular ventilation requirements. Understanding the importance of keeping pace with the latest trends shaping the HVAC industry, Gallant works with its dedicated suppliers to ensure energy efficiency maximisation and environmental protection whilst developing new technologies. T +44 (0)1623 646640 info@gallantgroup.co.uk www.gallantgroup.co.uk
Solutions to Happy, Healthy Homes ventilation units suitable for corporate and home usage.
As a dedicated specialist in ventilation, condensation and mould, ESS is the installer of choice across London and the South East renowned for its leading range of premium quality ventilation equipment. Over 15 years of refined industry experience has enabled the team to collectively become decorated installers, commissioners and servicers of different
14
The group’s commissioning capabilities extend to air system balancing, system validation, trouble shooting & problem solving and commissioning certificates, whilst its servicing activities include full system checks, changing filters, cleaning and where required, a balancing check and re-commission. A mould cleaning solution is offered in addition to the ventilation correction services available; a process involving a non-toxic and non-caustic cleaning chemical which is applied to eliminate any mould present. T +44 (0)1428 751646 sales@essllp.co.uk www.esscontracting.co.uk
Do your properties have condensation problems? Do you have mould growth in your properties? Is mould causing health & legal problems?
We can solve these problems for you Preferred installers for Housing Associations in London and South East Installations • Commissioning • Servicing •
av
S
As an industry expert working in accordance with several major manufacturers, ESS can suggest which ventilation systems are most suitable for individual applications. The various types include heat recovery ventilation, positive input and extract ventilation units, all of which are components that have been rigorously tested to guarantee the expected results. In addition, efficient and timely installations can be carried out within budget by well-practiced engineers who are all qualified to the mandatory BPEC standards. The company, which is based in Bordon, Hampshire, acknowledges the importance of quality ventilation as an everyday essential contributing to the comfort and overall wellbeing of those working and living within domestic and commercial properties.
Air Conditioning for every project, visit: www.gallantgroup.co.uk
www.essllp.co.uk
London: 0207 123 4157 South East: 01428 751646
ing tho u
sand s in le g al
is sponsored by Schneider | please turn to page 11
disputes
Working at Height, Health & Safety News
l a ccess d d e r s
Engel have Workwear all Wrapped Up
We supply off the shelf caged or uncaged fixed access ladders/cat ladders. Most ladders are in stock, delivered to you flat packed for you to assemble on-site. Constructed in steel, generally to BS4211, the ladder and cage are supplied as a standard off the shelf ladder, bolted contruction for you to assemble on-site. Finish is hot dipped galvanised in accordance with BS EN ISO 1461.
Tel: 01642 355308 info@accessladdersuk.com www.accessladdersuk.com
One of Europe’s leading workwear manufacturers, Danish company F. Engel is continuing to make serious inroads into the UK workwear market. For more than 85 years, the company’s products have been selected by customers from all over Europe as the first choice for all-round protection and maximum comfort, no matter what a work situation may demand. Founded in 1927 by Carl J. Engel Senior and now 4th generation family-owned, the company has 850 employees based at its Headquarters in Norgesvej, Denmark and 2 factories in Lithuania. Since it first began, with the importing of denim from the U.S. as a hard wearing fabric, the company’s aims have always been the same – to provide superior quality, value for money workwear designed for a perfect, flexible fit and to give long lasting, reliable service. Amongst its comprehensive range of garments and accessories is the company’s collection of high-visibility safety workwear which is manufactured in accordance with the new International and European standardisation EN ISO 20 471. All Engel garments are available from The
The Engel High Viz Safety Jacket 1 1501-770-4725 Workwear Trade Centre, Milton Keynes; Telephone: 019 561569; email: sales@wtc-workwear.co.uk and Anchor Safety, Ipswich; Telephone: 0800 328 5028; email: sales@anchorsafety.co.uk For more information, visit: http:// www.fe.dk/en email Mark McBrayne at: mmc@f-engel.com or telephone: +44 (0)7933 150197.
All Round Knee Protection from Redbacks Redbacks Cushioning Limited, the manufacturers of the World’s only patented, ‘leaf-spring,’ non-foam or gel kneepads offer a strapped version as an addition to its original, big-selling product for pocketed work trousers. Designed, overseen and approved by a senior Ergonomist, Clinical Scientist and Biomedical Engineer, the kneepads retain the company’s award winning cushioning technology which incorporates a flexible TPE (Thermo Plastic Elastomer) leaf-spring set within a unique honeycomb matrix. Perfect for all round protection in the warmer months or in close, indoor temperatures, they have elasticated, soft Neoprene straps which have dust and particle resistant fastenings which allow them to be worn on bare skin without chafing, or are equally effective worn over
trousers, staying in the correct position in either case, when kneeling, walking or sitting. The pads have a waterresistant covering and a soft breathable, inner fabric that wicks away sweat whilst providing thermal protection from warm or cold surfaces. Scientifically proven to reduce point pressure and distribute weight evenly, the impact forces associated with kneeling are absorbed giving added protection against back and neck pain. Durable and hardwearing, Redbacks strapped kneepads give the user unrivalled, all-day comfort and long-term protection even in the harshest of environments. For more information and to order, visit: www.redbackscushioning.com email: sales@redbackscushioning.com or telephone: + 44 (0)1327 702104.
Innovative Cable & Asset Management Cable Trail are not only a supplier of products but also a developer of solutions. This year alone, we have added three new products based on customer requirements. We operate in a very diverse range of industry sectors such as Aerospace, Construction and Event management. Because of this diversity we need to be able to provide adaptive cable management solutions, from a basic hook system to a fully managed, RFID controlled system for areas that require maintenance tracking to ensure legislative compliance. Legislative compliance drives the add on products such as the LV-Tag used to identify a specific product or location.
is sponsored by Langs Quality Furniture | please turn to page 11
We try to ensure all our products are able to be used in extreme environments such as our Cable protection ramps that can withstand extreme loads up to 44 Tons and our Identification products that are approved to be used in potentially explosive areas such as Oil and Gas. T +44 (0)1423 209010 enquires@cabletrail.com www.cabletrail.com
15
Health & Safety News
16
is sponsored by Schneider | please turn to page 11
Health & Safety News
is sponsored by Langs Quality Furniture | please turn to page 11
17
Home Interiors News
Eco Flooring UK: Reclaimed Parquet & Strip Flooring Walnut Jarrah.
Eco Flooring UK specialises in the supply and professional installation of Reclaimed Parquet & Strip Flooring.
Because we salvage directly from UK and European demolition sites and preferred suppliers we ensure only the finest Reclaimed Parquet and Strip Flooring is purchased.
Carrying out projects across the UK, we pride ourselves on good old-fashioned hard work, craftsmanship and dedication to providing our clients with stunning Reclaimed Floors intended for a lifetime. With careful management of all our suppliers, our customers can be assured of the very best quality and value for money. Our ethos is to ensure all of our Reclaimed Flooring is Ethically Sourced, Eco Friendly, Premium Quality and Competitively Priced. Our Heritage Range of Recycled Parquet and Strip Flooring include such woods as: English Oak French Oak Pitch Pine Teak Mahogany Iroko
Careful management is key to supplying the very best Reclaimed Floors as this ensures whole blocks/ strips, no off cuts and no mixed batches. Reclaimed Solid Oak French Chevron has made a real resurgence since 2014 and we believe there is none better than our Statement Range. Sourced and shipped directly from Europe, this Reclaimed Solid Oak flooring is second to none. French in source and French in design – a dream of a floor! T +44 (0)1757 700170 info@ecoflooringuk.com www.ecoflooringuk.com
Get more value for your BettaHeating money with Betta Heating Underfloor Heating & Renewables
TRADE UNDERFLOOR HEATING SUPPLIES • Competitive Prices
• Pex-Al-Pex Pipe
• Industry Expert Phone Support
• Heatmiser Thermostats
• High Quality Products • Next Day Delivery • On-site Support • Loyalty Discounts
• Groundfos Pumps • EPS & Profix Panels • Rifeng manifolds • Accessories & much more
Call Today Quoting HPM100 and recieve 5% off your first order
Please visit www.betta-heating.co.uk J01625 466500 | info@betta-heating.co.uk
Stairs & Staircase News
Experts in hand sewn Makers of quality curtains and blinds, Paul Fisher Curtains create unique and beautiful products to enhance the look of your interior. Using customers’ own fabric or requested fabric, the experienced team of highly skilled hand sewing specialists not only cater to your curtain requests but also create quality headboards, upholstery and other soft furnishings for a convenient, single source solution. A full measure and installation service is provided for larger projects as well as fast turn around and rush projects are accommodated for. Customers can use the online tracking system to locate their order, putting their mind at rest. These first class products satisfy a wide range of clients from interior designers, park home manufacturers, high end and soft furnishings retailers and architects to high street curtain and blind retailers, schools, hotels, golf clubs and restaurants. With a life time of experience in creating soft furnishings at the impeccably high standards demanded of the professional design sector, Paul Fisher established the company to offer customers superior products along with a fantastic level of customer service. Paul is
aware of the requirement of professional designers for reliable delivery promises, sophisticated order tracking and is willing to help with the occasional rush-job and offer a trouble free and enjoyable order experience. With these demands in mind, the dedicated team, located in large capacity premises, offer professional making-up services through the new Paul Fisher brand. Paul, himself is extremely proud for such exceptional products and services to be sold under his name. For more information and to find out what Paul Fisher Curtains can do for you, contact the company on: +44 (0)1379 854676, email: sales@pfcurtainmakers.co.uk or visit the website at: www.pfcurtainmakers.co.uk
Curtains and Blind Makers in London the experts in hand sewn
Paul Fisher has a lifetime of experience creating soft furnishings to the impeccably high standards demanded by the professional design sector.
• Curtain Making • Roman Blind Making • Headboards and Upholstry • Hardware and Accessories • White Label Service.
Visit us at www.pfcurtainmakers.co.uk T 01379 854676 or email: sales@pfcurtainmakers.co.uk
18
is sponsored by Knotweed | please turn to page 8
Development Finance News
LOOKING FOR DEVELOPMENT FINANCE?
Heron Way Consultants specialise in bespoke development finance and have strategic partnerships in place to help fund new building projects for both new and experienced property developers. We can arrange: ää Development Finance ää Building Warranties ää Buy to Let and Commercial Mortgages ää Bridge Loans ää Unsecured Loans ää Invoice Discounting ää Asset Finance.
Heron Way Consultants successfully exhibited at the North England Build Show in April 2016 at Manchester Central. We were proud and surprised to be the only company offering finance to build properties. Maybe this highlights the amount of interest that the banks are showing in this sector!
Contact Martin Powell: 01454 326892/07770 988517 Email: martin@heronwaygroup.com | www.heronwaygroup.com
is sponsored by LeeSan | please turn to page 10
19
Roofing & Plastic Mouldings News
Plaster Ceiling Roses Plaster Ceiling Roses supply a complete range of decorative plaster mouldings, based in Manchester and carrying large stocks they offer a fast nationwide delivery service. The main product range is Plaster coving and Cornice (LINK: http://www.plasterceilingroses. com/plaster-coving-cornice ) along with an extensive range of Plaster ceiling Roses (LINK: http://www.plasterceilingroses.com/plasterceiling-roses ). All items are still made by hand in the traditional way using the finest quality casting plaster. The Plasterceilingroses.com website contains wealth of information; there are video installation guides (LINK: http:// www.plasterceilingroses.com/installationguides ) for both coving and ceiling roses along with clear pictures and dimensions of all their products, making it easy to find the type of product you need. Samples are available online of their full product range. They have sections covering Georgian and Victorian period mouldings many of which are popular today for new builds as well for the restoration of older properties. There are also sections on more modern contemporary coving. Few things can transform the look of a
Plaster Cornice, Coving and Ceiling Roses room as much as plaster coving, it finishes a room off in the same way as skirting boards and architraves, which it should be chosen to compliment. It is no more expensive to use an expert, they are quicker and neater, fill joints with casting plaster not filler or caulk, meaning not only will it look good when they have finished it will still look good in years to come as no cracks will develop around the joints. Plaster Ceiling Roses can arrange the supply of your plaster coving and also the installation by experienced fitters if required. They have worked on many kinds of new build and are happy to offer advice on: +44 (0)161 408 2882 or visit: www.plasterceilingroses.com
Plaster Ceiling Roses supply a comprehensive range of traditional and contemporary moulded plaster products. All our items are hand made in traditional moulds using the finest quality casting plaster and the same techniques that have been used since Victorian times. Our period designs are authentic in every detail and once decorated are impossible to tell from original plasterwork, we also make bespoke mouldings and can repair and replace existing plasterwork. We have a full range of products for modern properties and specialise in new builds.
Please visit www.plasterceilingroses.com Call us 0161 408 2882 or 0203 286 2882 Email: info@plasterceilingroses.com
House Planning News
RMIG ImagePerf From a uniform facade to an expressive decoration: RMIG Imageperf makes it possible for you to use perforated metal cladding as a canvas for art, photos and graphics. Perforated metal is available in a multitude of materials with various surface treatment options. RMIG ImagePerf goes a step further and lets you recreate photographs or an artist’s vision to produce a completely unique design with the option to create a distinctive lighting feature. Use RMIG ImagePerf to emphasise the aesthetics of architecture. Use it as a decorative element in the cityscape, or let the facade on the outside reflect what is going on inside. We can reproduce all
kinds of original material and look forward to hearing your ideas and requirements. See our case studies and find more inspiration at www.city-emotion.com T + 44 (0)1925 839600 info.uk@rmig.com www.city-emotion.com
MossCreek brings American Rustic Design to the UK A primary design goal of MossCreek is to develop a home that becomes a beautiful complement to the setting and land that the home is situated in. Special attention is paid to natural features of the land, and a design is created that celebrates and showcases the client’s property from both outside and inside the home.
The most popular rustic home design firm in America is now offering full design services to self-build clients in the UK. Having created beautiful homes throughout the U.S. and Europe for over 33 years, MossCreek is now actively involved with projects for self-build clients and their Main Contractors in Britain. MossCreek’s unique approach to home design begins with a trip to the project location for personal consultations with the client, and to thoroughly familiarize themselves with their client’s property. MossCreek listens closely to the client, and works with them to create an interior plan that reflects their lifestyle and needs, while encompassing it in the rustic style that MossCreek is known for.
20
Using the technologies of remote meetings and cloud file storage, MossCreek is able to closely work with their clients throughout the world to actively engage with them in the design and their new home. As the project progresses, MossCreek’s clients are able to obtain real-time updates and provide constant feedback and direction to MossCreek. Design decisions are made jointly and the results are soon available for further discussion and incorporation in to the residence. With their unique insights and understanding of rustic homes, MossCreek is the preeminent source for full custom design services, as well as a large collection of plans and designs that are vetted and ready for immediate purchase. The work of MossCreek can be viewed on their website at: www.mosscreek.net and they can be contacted directly at: +44 (0)20 3290 2986. For the individual who is looking for a unique and striking rustic design, MossCreek looks forward to the opportunity to work with them in creating that legacy home.
is sponsored by Knotweed | please turn to page 8
Architectural News When its about the view, not the window...
Architectural Vision Systems is a company founded out of the structural glazing market, with the principles having worked on many complex projects in demanding situations. Having built many complex opening products ranging from 2,000kg opening glass rooflights to pivot opening glass facades it has become clear that there is a consistent demand. The requirement: remove the divides between outside and inside whilst maintaining the comfort of modern living. Our window and door systems realise this vision through experienced design, use of quality components and dedication to innovation with the elements that you don’t see to create less of what you do see.
Please contact us for further information on: 01843 825 573 Email: info@arcvis.co.uk | www.avsglass.co.uk
Frameless sliding doors and slim line pivot doors & windows Our vision is simple, Vision. Being able to see exactly what you want: your view, not your window or door. We specialise in installing frameless doors and windows in homes and commercial buildings across the UK. We take glazing to a whole new level, by making it invisible. We pride ourselves on making our prices as transparent as our glass. For a basic quote, please simply give us the dimensions of your door/window and whether you want it 2 or 3 panes, and we will give you an immediate price. This doesn’t include any modifications, which we can discuss if you wish to personalise your quote, but it will give you a rough idea of affordability.
Handheld Sealent News
If you have your own vision that you would like us to help you build, then please do get in touch to discuss in more detail. Contact T +44 (0)1843 825573 info@arcvis.co.uk www.avsglass.co.uk
Building News
Munters, a global leader in energy efficient air treatment and dehumidification Munters CPD seminars provide the ideal opportunity to gain an understanding of humidity theory from the global leaders in energy efficient air treatment. Munters is a global leader in energy efficient air treatment and dehumidification. Through seminars, Munters look to educate participants on how moisture can impact a wide range of industries and applications, including museums, ice rinks, bridges, buildings, defence applications, utilities (water and power stations) and many more. Accredited by CIBSE (Chartered Institute of Building Services Engineers), these popular CPD seminars are held at participants' own premises for groups of up to 20 people at your convenience (larger events can be held upon request). Usually the best time is over lunch and with our Lunch & Learn seminar – we’ll even provide lunch for you! A Typical Agenda: Dehumidification, humidification and/or evaporative cooling (data centres) theory
Methods of relative humidity control, its benefits and case study examples Introduction to the Psychrometric chart Calculating moisture loads Energy savings and controls Industry and application case study examples – tailored to your industry (where applicable). Our seminars are perfect for Consultants, Architects, Mechanical and Building Services Engineers as well as end users and industry professionals wanting to learn more. Contact T +44 (0)1480 410211 dryair@munters.co.uk www.munters.co.uk/ukseminars
‘One Man with One Screwdriver’ Architectural ironmonger BJ Waller has launched a new service with a leading UK door manufacturer for fully integrated commercial doorsets for commercial internal doors, including fire resistant, acoustic, X-ray and many more. As well as ensuring accurate specification for high usage applications, delivering slabs with pre-prepared hardware will speed up timelines for contractors by making doorset installation a job for ‘one man with one screwdriver.’ Each doorset schedule is tailored to the project, with BJ Waller providing expert technical advice and support to deliver the right hardware for the chosen door slab. Options include BJ Waller’s new Quick-Fit Plus system which offers easy and precise assembly of the whole door handle set in a few seconds. Integrated doorsets are designed to make life easy for everybody. For contractors, there are obvious advantages in terms of time and cost-savings but the bigger benefit will be to reduce the chance of damage to doors from fitters rushing to complete the
is sponsored by LeeSan | please turn to page 10
job. For specifiers, that adds extra peace of mind that the finished product will be in top condition for long-term efficiency and durability, backed by BJ Waller’s expert knowledge of hardware performance. By partnering with the door manufacturer, all preparation is done in the factory. Slabs are supplied pre-hung with as much hardware already in place as possible – anything that is flush – for easy installation. All protruding hardware is fully prepared prior to delivery. T +44 (0)1353 647111 sales@bjwaller.co.uk www.bjwaller.co.uk
21
Product Innovation Award – Flood Detection
Industry Excellence with the Innovative SuDS Solution Rainwater Harvesting Ltd has been duly commended with our Product Innovation Award, we are delighted to announce here at Building Solutions UK. The company, which can be found at Harrier Park in Peterborough, was founded in May 2007 and has gone from strength to strength in the years that have ensued. The brand is now widely considered one of the UK’s leading rainwater harvesting specialists and is renowned for its ability to assist its customers with the provision of concentrated support and high quality solutions. Product innovation is essential in ensuring an effective response to the strains surrounding the UK’s water infrastructure (climate change, population and urban growth being the main contributors). In an attempt to maintain a sustainable cycle to combat the subsequent shortages of supply and severe flooding, Rainwater Harvesting has developed an entirely new Integrated Water Management System. The simple yet functional innovation, named RainActiv, merges the heavily controlled release of attenuated water into the network with the option to combine with Rainwater Harvesting. The revolutionary Sustainable Urban Drainage System (SuDS) device has an ultra-low discharge rate (as low as 0.05 litres/second per property; 50X lower
22
than some Vortex flow control systems) and has the flexibility to calibrate with individual site requirements. As a completely unique concept, this cost-effective solution will significantly impact the storm attenuation market with its easy integration and high performance functionality. Designed by industry frontrunners, the decentralised water management system collects water from a roof space whilst removing debris using a self-cleaning filter, and an underground tank stores and attenuates the clean water which is then discharged at a calculated rate. If required, the cool, fresh water can then pumped back into the house for
toilets, washing machines and outside use. “There is nothing else available out there that solves the problems occurring within the industry,” commented Marketing Specialist Jarred Lester. “The large, modular tanks seen on many sites typically require around 50 houses for the system to work effectively, but the compact RainActiv is ideal for smaller sites as it works on a house to house basis controlling the discharge rates.” “The specially developed system controls the rainwater at source making a better use of the space,” added Office Manager, Jae Lester. “For every specification, we use high end SuDS calculation software Micro Drainage; this ensures clients can be absolutely clear about their discharge rates. Having recently focused our attentions
on sustainable drainage systems, we believe that this product will make a massive difference to the industry with its notable cost savings.” If you would like any further information please don’t hesitate to get in touch with Rainwater Harvesting today. The friendly group of professionals employed at the company will be happy to negotiate with you in a no-obligation phone call and instant quotes can be readily supplied where requested. You are also free to post questions and queries via the company’s social media platforms or send across an email detailing your requirements. Rainwater Harvesting Ltd T +44 (0)1733 405111 sales@suds-solutions.co.uk www.suds-solutions.co.uk
is sponsored by Knotweed | please turn to page 8
Product Innovation Award – Flood Detection
Go with the flow
Rainwater Harvesting with controlled storm attenuation
What is Rain Activ? Rain Activ is an innovative new SuDS system that can be used in conjunction with Rainwater Harvesting. Unlike others on the market, Rain Activ is delivered with SuDS run off values required to submit for planning applications. Rain Activ is also virtually infinitely variable to attenuate between 750-15,000L and as the rate of attenuation which can be calibrated to individual site requirements. How does it work? Rain Activ utilises a custom built SuDS/filtration element with two sections, an upper and lower element. The upper element filters water from the roof space before it enters the tank. The lower element controls the SuDS of Rain Activ. On top of the lower SuDS Chamber is a small inlet, this is the flow control valve. When water reaches this it will be released from the tank at the pre determined discharge rate. Water below the SuDS chamber will be stored for traditional Rainwater Harvesting. Customers supply our technical team with required site drainage figures and Rain Activ is specified bespoke to requirement. This means the system will be capable of attenuating a ‘1 in 100 year‘ storm effectively. The volume of water to be attenuated can be altered by altering the ratio of Rainwater-SuDS by increasing the height of the SuDS chamber. The rate of attenuation (run off rate) is calibrated by modifying the size of the SuDS inlet. Why Rain Activ? Rain Activ is an exciting opportunity, both to large developers and homebuilders alike. By using Rain Activ, the need to build and maintain SuDS elements such as wetlands and balancing ponds is lessened. This can increase the amount of useable land that can be built on. Homebuilders are provided with a ‘turn key‘ SuDS solution, fully documented ready for planning submission. By utilising Rainwater Harvesting owners can save up to 50% on water bills as well as making their projects are more sustainable.
Please visit www.suds-solutions.co.uk J0800 074 7234 m info@suds-solutions.co.uk is sponsored by LeeSan | please turn to page 10
23
Structural Defects & Insurance Experts News
24
is sponsored by Knotweed | please turn to page 8
Structural Defects & Insurance Experts News
is sponsored by LeeSan | please turn to page 10
25
Building News
Representing the Industry Making you feel at Home British Furniture Manufacturers (BFM) is a trade association acting in the best interests of its members; manufacturing companies spanning different industry strands including upholstery, cabinet, bathroom, kitchen, office and mattress & beds. The reputable organisation, which has impressively been in operation for over six decades, focuses on the growth and promotion of businesses working within the British furniture sector. Its main aim is to represent its members whilst promoting high standards on a national and international level. Association with leading suppliers, retailers and ancillary companies makes membership particularly profitable for industry professionals, and significant advantages of joining forces with BFM include access to impactful solutions, support and trade data (as well as a multitude of networking
opportunities and the implementation of core strategies designed to reduce expenditure and encourage sales). BFM recently launched its Great British Furniture Campaign, a scheme developed to increase awareness of the factors that make British made items of furniture attractive to consumers, retailers, contract specifiers, architects and the wider audience. For more information on the trade body and its game changing initiatives then please get in touch with the business today. Contact T +44 (0)1494 569124 www.bfm.org.uk
Energy-Efficient Air Conditioning Solutions from Hawco
Katzbeck, a company boasting a staggering six decades of industry-specific experience and competence, is a leading specialist of high quality triple glazed windows & doors made from woodaluminium and wood. Based at Kensington Square in London, the reputable consultants and suppliers merge superior technology and sophisticated design whilst creating exceptional results for a multitude of clients. Prioritising innovation and performance, Katzbeck prides itself on its extensive range of functional window systems, lift and slide patio doors and main entrance and balcony doors. Available in a choice of colours and timbers, the carefully constructed components don’t just offer sensational energy efficiency and heat insulation
capabilities; they also add aesthetic value with their sleek structures and decorative finesse. Woodaluminium and wood are ideal constituents for buildings of all sizes and conditions because of their weatherproof quality and great durability. Requiring minimum maintenance, the sustainable and renewable resources provide a pleasant indoor climate with ideal operating comfort for new builds, low-energy, Passivhaus and Self-Build projects. T +44 (0)20 3005 3253 enquiries@katzbeck.co.uk www.katzbeck.co.uk
High Technology Products Established in 1981, H.T. Products Ltd is a manufacturing company specialising in Vacuum Technology and Leak Detection. Since its inception it has built up a wealth of technical expertise and used this specialist knowledge to provide solutions for many industries and businesses. With an emphasis on creative problem solving and technical accomplishment the company and its staff are able to accommodate a wide range of projects and take pride in ensuring that each job is completed and supported to the exacting standards that customers have come to expect. The directors of the family run business have a wide experience of the vacuum industry, having been involved over the years with a number of the big
name companies in the field. A notable product in the advanced range is the Multi-Gas LS-4. Providing peace of mind on site the innovative system provides a useful reference against which an engineer can check the sensitivity of their leak detector at regular intervals during a leak detection job. This can help to quickly identify battery or sensor problems which can affect the performance of the detector. T +44 (0)1323 442035 info@htproducts.co.uk www.htproducts.co.uk
Hawco is a leading supplier of engineering component parts and spares to the air conditioning industry, and no matter what you are looking for in an air conditioning system, Hawco has the solution for you. With over 10 years’ experience supplying split, multi-split and VRF/VRV air conditioning systems, Hawco’s expert technical support team and sales engineers have the knowledge and experience to help you choose the perfect AC solution for any application. Working with more than 1,000 Air Conditioning engineers and contractors across the UK, Hawco can offer fast and flexible service with outstanding aftercare support and expert advice. The benefits of working with Hawco include, but are not limited to: Next Day Delivery Expert Technical Support Room System Selection Software Competitive Trade Discounts.
solutions. Hawco is pleased to offer Daikin’s full range of products, including their three Sky Air ranges to cater for all budgets from the Siesta economy range to the Seasonal Smart Premium range. LG Air Conditioning Hawco’s distribution agreement with LG means that they have full access to all of LG’s newest and most innovative air conditioning products, including their unique ARTCOOL range. All LG products come with a 5-year manufacturer warranty.
Hawco is one of the leading UK distributors for a number of Air Condoning brands including Daikin, LG and Hitachi.
Hitachi Air Conditioning Hitachi’s full range of high-tech air conditioning solutions is also available from Hawco, including Hitachi’s market-leading, innovative new product, the Utopia IVX Premium, a cost-effective alternative to a 2 pipe mini VRF.
Daikin Air Conditioning Daikin represent one of the leading brands in the Air Conditioning market and offer high quality and efficient Air Conditioning
Contact T +44 (0)1483 869070 sales@hawco.co.uk www.hawco.co.uk
The UK’s Largest Heating Element Manufacturer Heaters, Cartridge Heaters, Ceramic knuckle heaters, Tubular rod Heaters, Immersion/ Flange heaters, Air Duct Heaters, Ceramic Core heaters, Strip Heaters, Roller/Disc Heaters and all forms of Fabrication & Sheet Metalwork which may be required. Elmatic also produce a range of Load Banks for the testing of generators.
The family business, which specialises in the supply of heating elements for industrial and electrical applications, was founded by Franz Skalitzky & Cyril Hodges in 1949. Over six decades in the trade has resulted in the company becoming a highly regarded industry expert, holding the prestigious position as one of the country’s leading heating element manufacturers and industrial & electric heater suppliers. Elmatic boasts the widest and best quality range of products on the market and its team actively strives to ensure all customers are dealt with accordingly with the provision of suitable electric and industrial heating elements. The extensive inventory includes Mica Band & Plate Heaters, Nozzle
26
One of the company’s most notable innovations is its line of square section heaters. Suitable for situations involving injection/blow moulding, rubber moulding, mould & tool dies, manifolds, plastic process machinery, packaging machinery, test equipment and such, the single-ended components guarantee a better heat transfer with more surface contact and the capability to operate at temperatures up to 750°C. The fully sealed heaters also promise a rugged design, tubular construction and unmatched level of durability. Contact T +44 (0)29 2077 8727 sales@elmatic.co.uk www.elmatic.co.uk
WELCOME TO THE WORLD OF KATZBECK WINDOWS & DOORS
You can live anywhere but Katzbeck makes you feel at home. J +44 (0)20 3005 3253
www.katzbeck-windows.co.uk
is sponsored by Knotweed | please turn to page 8
Building News
Reduce staff injuries with process driven conveyor solutions Conveyors make all the difference when moving heavy or difficult loads. Gravity conveyors include those with rollers, wheels or chutes where objects move by gravity or momentum, typically mounted on a slightly declined angle, using gravity to assist product movement. Staff no longer need to handle parts manually eliminating the risk of injury as product either slide into position (If horizontal) or gravity is left to do the work. The journey is mapped out, so that parts never go astray and assembly is always done in the right order. This eliminates the risk of items being picked up and
replaced in the wrong destination. Workstations connected by conveyors make the process very easy to understand and designates a clear order for staff to follow. Mistakes will be identified quickly, saving valuable production time and increasing productivity. We design and install bespoke conveyor systems equipped to support specific processes and to maximise efficiency in the available floor space. Our systems are built with modular components meaning solutions can be devised, created and reconfigured quickly and easily whenever requirements evolve or improvements are identified. Contact T +44 (0)1295 277791 sales@tubeandbracket.com www.tubeandbracket.com
Cubbyhole launch UK’s newest online property website
Cubbyhole is the UK’s newest online property website which entered the marketplace in May, with a fresh and innovative idea for the housing market. To provide all the tools you need to buy or sell a property locally or nationally, from just £60 (inc. VAT). With marketing campaigns taking place across the UK through several media platforms Cubbyhole is sure to get your property noticed! As the UK market battles the ever-growing pressures on first-time buyers, interest rates and Stamp Duty, everyone is looking for ways to save money. On a typical house sale, cubbyhole.co.uk could save people thousands. By not having to pay the traditional estate agency fees you can control your move and control your costs. cubbyhole.co.uk is one of the first consumer
is sponsored by LeeSan | please turn to page 10
property portals where buyers and sellers can connect and communicate online – without an actual estate agent. Cubbyhole allows sellers to upload their images, input their own details and most importantly, describe and showcase their home in their own words. In turn, the portal then allows potential buyers to browse the market by location and have direct contact with the seller prior and after viewing a property. Cubbyhole has a ‘Find a Pro’ directory which provides a list of services and trades within a search area that help with every aspect of the purchase or sale of property. Cubbyhole has entered the market with an introductory offer to UK housebuilders, they can advertise their developments free of charge on the Cubbyhole website, providing nationwide exposure. For further information on advertising your property or development through Cubbyhole, please email: info@cubbyhole.co.uk or call: +44 (0)1304 614631.
27
Building News
COX Dose Control Cordless Dispenser Technology from Sulzer Mixpac (UK) Ltd With over 50 years’ experience in manufacturing dispensers for single and dual component materials, the COX brand has stayed at the forefront of the industry by responding to changes in sealing and adhesive technology. Collaboration with major chemical suppliers has enabled us as a manufacturer to develop innovative dispensing systems to meet changing demands.
The Cox Electraflow The Cox Electraflow, already one of the industry’s most successful, professional applicators, moves on to the next level with the Electraflow Plus. Now, with a lighter 18V lithium-ion battery, the Electraflow Plus has even more power. Its ergonomic design ensures that the Electraflow Plus provides the professional user with a perfectly balanced tool, capable of smoothly dispensing controlled beads of urethanes and other high-viscosity sealants and adhesives. Electraflow Plus is available in two models: the Electraflow Plus Cartridge and the Electraflow Plus Combi, which can be easily configured to accommodate cartridges and sachets, allowing for quick and efficient dispensing.
Dual component chemical anchoring systems are now well established in the construction industry with multiple choices for architects and builders to select from; most of these systems rely on standard dispensing tools developed to suit the common packaging systems. With increasing use of these expensive materials, it is important to ensure the correct volume of material is used for each fixing. An insufficient amount and the anchor may not meet the design specification, ultimately compromising the installation with possible safety consequences. On the other hand, over application is wasteful and increases the installation cost for the contractor.
include optional dose control embedded in the dispensing software. This new COX brand system delivers a consistent volume of chemical anchor each time the trigger is activated whilst still providing full speed control for precise application. A dose dial provides a range of adjustment to meet the application requirements.
Recent developments in battery-powered single and dual component dispensers from Sulzer Mixpac (UK) Ltd
www.sulzer.com/en
These powerful battery applicators give the user full portability on-site, enabling high productivity improvements with up to 80 cartridges possible between battery charges.
The new, more powerful Cox Electraflow Plus provides: 3.5kN of force for higher viscosity materials 18V Li-Ion battery for greater power and short recharge time (30 minutes for full charge) Speed rack of maximum 8mm/sec for higher material output Speed sensitive trigger to assist less experienced operators to bead into and around corners New soft touch rubber grips to improve operator comfort and tool support on inclined surfaces Variable 9 speed power dial to set application speed and control the rate of material output Designed and manufactured in the UK for guaranteed excellent quality Bespoke control board programmes are possible (at
additional cost) Auto-reverse feature, which drives the rack back
automatically after dispensing to prevent material overflow Overload shut off protection to prevent damage to electronic and mechanical components when overloaded. With the latest Li-ion battery technology, the Electraflow Plus can be charged at any time, it doesn’t have to be run empty first. All applicators are supplied with one battery as standard; additional batteries can be supplied on request at an extra cost – there are two capacities available: 1.5Ah (fitted as standard) or 3.0Ah which provides longer battery life. For more information about Electraflow Plus Cartridge and Combi please visit: www.coxdispensers.com
Gripple responds to new amendment in fire resistance wiring regulations Gripple Limited, the world-beating manufacturer of wire suspensions for building services installation, has taken cable management to yet another level in response to new wiring regulations where fire resistant suspended services are required. The company has launched the specifically developed Trapeze Plus FR No. 3 to comply with amendment 3 of the 17th edition wire regulations relating to wiring systems in escape routes. This applies to cabling and containment systems which must be protected to ensure they are not prone to premature collapse in the event of fire.
tool-free setting. Ideal for suspending ductwork and baskets quickly and safely, the Trapeze range are perfect for work at height. Both the Trapeze Plus FR and the Trapeze Plus have a locking screw for tightening to provide ultimate security. The all-steel Trapeze Plus is packed with features to make channel suspension even more secure and durable. For further information, please contact Frazer Belafonte on: +44 (0)7795 114667 or f.belafonte@gripple.com.
Supplied with stainless steel wire, the all-steel Trapeze Plus FR No. 3 is fire-rated, with various levels of certified exposure times and load limit specifications available depending on the level of protection required.
The Flexible Coatings Company
Each member of the four-strong Gripple Trapeze range, all supplied in ready-to-use kits, has a single channel, enabling preinstallation and multi-tiered arrangement,and an integral adjustment button allows easy
Design out leakage The quote ‘if you always do what you’ve always done, you’ll always get what you’ve always got’ could not be more true of the traditional methods used to regulate water usage and design out leakage. Traditionally, and unlike other utilities, water service control has been left in the public highway; with meters being buried in boundary boxes located in footpaths or worse, the consequences of accessibility, leakage and maintenance are inevitable. Replacing and maintaining boundary boxes is time consuming and expensive, but there is an alternative greener, cost-effective solution to install new or replacement water services – The Groundbreaker Water Management System – an insulated chamber above ground, which attaches easily and discreetly to the property at just above ground level in which sits a water control valve and meter. It is estimated that around 25% of leakage emanates from private water service pipes (source: Society for the Environment) which were installed using ‘old technology.’ With this in mind, it is clear that ‘what you’ve
28
Challenges us to find you a Solution... Thermaset Ltd have established an enviable UK-wide reputation for innovation and excellence in the formulation and manufacture of thermosetting powders for electrostatic application. Established in 1984, our success has always been based on the principal that our customers’ problems are our opportunities. Like many companies, we had humble beginnings, but we have grown and thrived in an increasingly competitive market place by maintaining the exact same focus on customer service we had on day one. For our customers, this has meant security in the knowledge that we provide the right solutions at the right time – no matter what the request. The expertise of our personnel in powder coating spans over 30 years. ✔✔ Widest stock range in the UK
always done’ is probably not the best and most effective way forward for the future. By ‘designing in’ maintenance free systems, developers, landlords and utility companies should reap the benefits offered from the use of the Groundbreaker System for many years to come, enhance their carbon footprint and reduce energy costs – all of which score points towards the Code for Sustainable Homes, BREEAM and other environmental management tools. For further information, please contact Groundbreaker Systems: www.groundbreaker.co.uk or call: +44 (0)1379 741993.
✔✔ Over 100 years colour matching experience ✔✔ UK wide technical sales force ✔✔ Next day delivery for stock items.
T 01827 55777 F 01827 53773 E info@thermaset.co.uk W thermaset.co.uk A Thermaset Ltd, Claire Works, Anders, Lichfield Road Industrial Estate, Tamworth, Staffordshire, B79 7TA, United Kingdom
is sponsored by Knotweed | please turn to page 8
Building News STANDARD AND BESPOKE ARCHITECTURAL ROOFLIGHTS AND ROOF GLAZING Available in many colours, with options in glazing which include the latest Thermally Efficient self cleaning glass.
Water quality in communal heating systems
You may require a simple Mono-pitch glass Rooflight, a large Lantern Light or a feature Orangery Glass Roof, all of which come with our renowned pre and post delivery service, which includes site surveys, detailed drawings and full nationwide installation, if required. If you prefer your rooflight to be designed and supplied only, for installation by your builder, we are pleased to advise and provide detailed fixing instructions, along with telephone support to ensure speedy installation. The same service is given to a single supply only rooflight, as it is to a substantial and complex feature installation, both being important elements to any project. • ANY SIZE • ANY COLOUR • MANY GLAZING OPTIONS • ELECTRIC OR MANUAL VENTS • STRUCTURAL ALUMINIUM SECTIONS
For more information, please contact 0191 273 7738 sales@rooflight.co.uk | www.rooflight.co.uk
With a wealth of experience supplying heat interface units to communal and district heating systems, Giacomini UK is able to offer dedicated technical assistance and advice on how to achieve the best results. In this article Giacomini UK’s technical support manager, Helen Gibbons, discusses the importance of water quality in communal heating systems. With the support of her Giacomini colleagues, Helen is hoping to increase understanding of how to protect vital components within communal or district heating systems from damage caused by debris in the system. Ensuring optimum performance and functionality over the system’s lifetime. Helen explains, “When there is a problem with the system, in most cases, it demonstrates itself at the point of use, leading the end consumer to believe the issue is located there. “During a recent callout, where a fault had been reported at the heat interface unit, I found the strainers protecting the unit both damaged and almost entirely blocked by debris. When emptying one litre of primary flow water into a jug, the course dirt settling at the bottom of the jug came up to the 100ml mark.” A HIU works by transferring the thermal energy from the primary system over to the secondary systems, via plate heat exchangers. If it is not receiving enough energy from the primary side, the laws of physics prevent it from giving enough thermal energy to the secondary heating and domestic hot water. The thermal energy received from the primary side is a combination of temperature and flow rate. Filters blocked by debris will restrict the flow rate to the HIU and as such also the energy delivered. Debris blocking the strainers will also lead to increased pressure drops in the system, decreasing the efficiency of the primary pumps. “This is why cleanliness of the water in these systems is essential!” continues Helen. “To prevent dirt build up, the water quality of the system needs to be considered as early as at the design stage. To keep the water dirt free, air and dirt separators need to be included in the system as well as y-strainers near critical components. Designers should also think about how the system will be maintained and kept at a good standard by including flushing by-passes and drain
is sponsored by LeeSan | please turn to page 10
points, as well as pressure gauges near filters for ease of monitoring differential pressure caused by dirt build up.” Giacomini also recommends that dosing pots be incorporated, so that the correct water treatment can be included and maintained throughout the lifetime of the system. The water should be continuously monitored and maintained by a water treatment specialist to avoid limescale, oxidisation and corrosion, as these can lead to solid particles building up in the water, which can again block strainers or damage components. Never leave untreated water in the system for a prolonged time. “Moving on from the design stage, prior to commissioning of the system, the pipework needs to be thoroughly flushed to remove all debris that might be present from the construction stage. Dedicating time to flushing the system properly and carefully will save a lot of future problems. “The system needs to be filled with clean, treated water, which prior to filling should have gone through a filtration process as the mains water can contain contaminants.” If the above processes have been followed the system should now have been flushed and free from construction debris; filled with clean treated water; treated to prevent future debris build up caused by lime scale and corrosion; and have air and dirt separators as well as filters in place to take out any dirt that might be present despite the precautions. “All that is left now to ensure a long life, low maintenance system is to make sure there is a programme in place for cleaning of filters and for topping up of water treatment.” Helen concludes, “Incorporating these precautionary methods will save a lot of time and money in avoided call outs and repairs. Most importantly though, it will ensure the end consumer has got a continuous and uninterrupted supply of heating and hot water.” For more information, please visit: www.giacomini.co.uk
29
Building News
IMI’s intelligent control valve system saves money and energy IMI Hydronic Engineering has created a brand new solution to the problems caused by inaccurate control technology in heating or cooling systems. Uncomfortable temperature oscillations, noisy systems, and expensive and unsustainable energy bills are all a thing of the past with the new TA-Modulator – a highly precise pressure independent balancing and control valve – in conjunction with a range of fully digitally configurable actuators TA-Slider. Together, their revolutionary technology delivers the exact amount of energy to ensure perfect comfort and reduced energy costs. Temperature fluctuations and high energy consumption are often caused by oversized or undersized control valves, overflows or underflows, incorrectly set up pumps, and inadequate control valves that only deliver the necessary flow to reach the desired temperature and keep it stable. The results can have alarming effects on energy consumption – overheating by just one degree Celsius in winter increases the annual energy consumption by 6% to 11%. The figures for cooling systems are even more dramatic: one degree lower than necessary equates to a 12% to 18% increase in energy costs. Energy demand and flow rate bear no linear relationship for cooling and heating coils. A flow rate of just 20% is required for an output of around 50%. Most air-conditioning
The UKs Largest Heating Element Manufacturer
Leading the way Elmatic (Cardiff) Ltd is the largest manufacturer of Industrial Electric Heating Elements in the UK. Elmatic Ltd have the widest product range to meet our customer’s requirements. Our product range includes: ää Cartridge Heaters
ää Mica Insulated Heaters ää Ceramic Knuckle Heaters
systems are oversized to withstand a few peak days in the year – a flow rate of 100% is therefore only required in rare cases and so HVAC coils operate at a flow of just 25% for the majority of the year. The TA Modulator from IMI has been designed using a valve with a uniquely shaped, patent-pending EQM characteristic. This allows it to accurately make the minimal corrections to the flow to keep the desired temperature stable. The valve provides a 600% larger working stroke than linear valves at the same flow rate, giving it an outstanding ability to control the flow almost to zero value.
ää Tubular Rod ää Immersion Heaters ää Air Duct Heaters ää Nozzle Heaters ää Ceramic Core Heaters ää Square Section Heaters ää Strip Heaters ää Roller or Disc Heaters ää Fabrication & Sheet Metalwork.
Please telephone 029 2077 8727
Email: sales@elmatic.co.uk • www.elmatic.co.uk
The TA-Modulator from IMI is a Pressure Independent Balancing and Control Valve (PIBCV). The built-in pressure controller protects the valve against pressure fluctuations in the installation, keeps the temperature control highly stable, and minimises the number of actuator movements, prolonging its longevity. It also protects the installation against overflows, provides automatic hydronic balancing, simplifies commissioning and saves pumping costs up to 40%. In contrast to most competitor products the TA-Modulator is able to measure both the pressure and the true flow through the valve. It is therefore easier to correctly adjust the pumps in order to minimize energy costs or to locate and rectify any errors or malfunctions in the entire system. T +44 (0)1582 866377 sales.uk@imi-hydronic.com www.imi-hydronic.com/en
Contact us for expert advice: 0800 772 0194
Got Scratched Glass?
We can help you! Professional cost-effective and hassle free service. We polish out scratches and restore toughened, laminated, mirrored and tinted glass.
T 0800 772 0194 | www.clarityglassrepairs.co.uk
30
is sponsored by Schneider | please turn to page 11
Building Classifieds
K E Y S PLEASE The Key Replacement Service
LOST KEYS? – NO PROBLEM “Simply quote the numbers and letters stamped on the lockface and we will send out your keys today.”
• Order Keys Online • Secure and Simple Call today or visit our website for more details:
www.keysplease.co.uk Tel: 020 8343 2943 | Email: sales@keysplease.co.uk
KEYS
PLEASE
• Innovative new SuDS system • Ultra low discharge SuDS device • Peak discharge as low as 0.05 Litres/sec per plot • Simple to install, very low maintenance.
Please visit www.suds-solutions.co.uk J0800 074 7234 m info@suds-solutions.co.uk
is sponsored by Langs Quality Furniture | please turn to page 11
31
Steel Building & Construction News
Printed by Iliffe Newspapers • Distributed by Media Matters Direct, Tel: 07966 152259, www.mediamattersdirect.co.uk
Buildings policies for intermediaries and brokers Premier Guarantee is one of the UK's leading providers of Structural Warranties and Building Control. Since 1997, the established brand has successfully presented solutions to thousands of builders and developers across the UK and Ireland. With policies in place on over a quarter of a million housing units, Premier Guarantee has become the provider of choice for some of the country's leading property developers with services spanning throughout the lifetime of your build programme, providing you with assistance from early planning stages, through to final sign-off of your properties. Their huge success is largely due to the fact that Premier Guarantee delivers some of the most innovative, competitively priced schemes on the market. Its activities have been operationally effective ever since the company’s establishment and are consistently supported by its dedicated surveyor network, which is made up of over 100 industry professionals. As well as being readily available for on-site visits, the local surveyors are also on hand to provide advice where needed, regularly communicating with the client to solve any problems that may have arisen. Premier Guarantee boasts a well-built business structure, with a workforce comprising over 300 employees who make it their personal priority to provide quality levels of support to customers working on construction projects and those in need of warranty solutions for all types of residential and commercial builds. Builders and Developers benefit from these efficient services as Premier Guarantee ensures your project runs smoothly. The company appreciate that your focus is making sure your homes and buildings are built to the correct standards and on time and therefore guarantee the process of
sorting your structural warranty is as simple as possible. As a housing association, Premier Guarantee understands that making sure your tenants are safe is a very important aspect of your role. For that reason, they provide warranties for social housing developments of all sizes and understand the needs of the teams involved with them. Whether it's sharing of information or issuing certificates, the team are on hand to support you as best as they can. Working with insurance brokers, independent financial advisors, mortgage specialists, commercial finance brokers and approved inspectors, Premier Guarantee helps Brokers, Architects and Consultants provide the right advice for their clients. Their national network of expert surveyors can support you in minimising any risks of defects whilst helping you to achieve the plans that you have. The Premier Guarantee Introducer Network is a select group of companies who work alongside the team to provide house builders and homeowners with expert advice on selecting and purchasing Structural Warranties.
Birkenhead Wirral, but also occupies a number of regional offices across the UK and in Europe. Excellence is spread across the spectrum, as all designated teams work in tandem so that when calls are received the right guidance can be provided regardless of the individual issue. Larger clients can maximise the services available from the field sales team, who are more than happy to manage quotes, orders and ongoing work whilst meeting on the occasion for follow-ups. All enquiries can be met accordingly, whether clients are looking to resolve problems, attain quotes or require certification. Customer satisfaction and industry distinction is of the utmost importance to Premier Guarantee, who mark the successes of their movements with an exclusive internally arranged event. The coveted ceremony, named the Premier Guarantee Excellence Awards, acknowledges the UK’s
best developments covered by the company’s schemes with a selection of well-deserved titles. The 2015 edition was held on Thursday 12th November at the Bankside Vaults in London as a massive celebration featuring the award winners and finalists, each of whom were individually recognised for demonstrating excellent skill, site management and quality in each of their chosen developments. Over a third of a million customers housing units across the UK and Europe have reaped the benefits of attaining coverage with Premier Guarantee. To find out more about this warranty provider of choice, who has worked in accord with some of the country's leading property Developers, then please don’t hesitate to get in touch with the team today. Alternatively you can browse the website to access further information about the solutions available.
Home owners are also supported as the company provides key issues that you should look out for as a homeowner as well as how to contact us if you find any problems with your new build home. Premier Guarantee is situated in
08444 120 888 www.premierguarantee.co.uk
MD Insurance Services Ltd is the Scheme Administrator for the Premier Guarantee range of structural warranties. MD Insurance Services Ltd is authorised and regulated by the Financial Conduct Authority.