Eagle Group Catalog

Page 1

Foodservice Equipment

Price List 2011


WARRANTY INFORMATION EAGLE Shelving Warranty EAGLE Foodservice warrants that goods supplied hereunder manufactured by EAGLE Foodservice will be free from defects in material and workmanship at the time they leave our factory. Upon factory inspection, we guarantee to replace any shelf that is defective for a period of up to one year from the date of original installation, not to exceed 18 months from date of shipment from EAGLE, provided that it has been properly installed and maintained. If a shelf proves to be defective, or not in conformity with the specification, customers are entitled only to replacement of such unit. Under no circumstances will we be liable for any claims for labor or subsequent damage. To the original owner, EAGLE GROUP warrants against rust formation over more than 5% of the shelving surface as stated below following original date of installation: ®

EAGLEbrite Chrome VALU-MASTER® and Valu-Gard® EAGLEgard® with MICROGARD® Stainless Steel LIFESTOR® with MICROGARD®

WARRANTY

DRY STORAGE

COOLER STORAGE

3-year warranty 1-year warranty 5-year warranty 15-year warranty

a a a a

-

a a

15-year warranty *

a a

a a

* 1-year manufacturer’s warranty on all defective component parts. * Lifetime limited warranty against rust or corrosion on stainless steel posts and stainless steel rails (3-year warranty on zinc with clear epoxy).

Eagle wire shelving must be cleaned with soft cloths and mild detergents. Using abrasive materials, scrappers or stiff brushes will void this warranty, as will physical damage, rupturing the coating or sustained exposure to corrosive substances and vapors. Warranty applies only when shelves have been continuously used within a temperature range from -20˚F to +120˚F, with intermittent exposure up to +200˚F for Valu-Master® or EAGLEgard® epoxy finishes, and up to +175˚F for chrome or EAGLEbrite® zinc finishes. In the event of a warranty claim, an EAGLE GROUP representative will examine the installation and determine return or repair disposition. Repairs will be handled by the initial owner. Returns, including disassembly and subsequent reassembly, become the responsibility of the initial owner. Replacements will be shipped prepaid FOB the nearest distribution point. There are no warranties which extend beyond these warranties. All other expressed or implied warranties, including those of merchantability or fitness for a particular purpose, which exceed the warranties stated above, are disclaimed by EAGLE Foodservice and excluded from this agreement. No employee or agent of ours has any authority to make any representation or warranty which exceeds the warranties stated above.

NO EAGLE EQUIPMENT MAY BE RETURNED EXCEPT UPON WRITTEN AUTHORIZATION FROM EAGLE FOODSERVICE EQUIPMENT. SEE PAGE 384 FOR TERMS & CONDITIONS.

* * *

EAGLE Worktable, Sink, Dishtable, and Ventilation Hood Warranty EAGLE Foodservice warrants that goods supplied hereunder manufactured by EAGLE Foodservice will be free from defects in material and workmanship at the time they leave our factory. Within a period of one year from the date of original installation of the equipment, not to exceed 18 months from date of shipment from EAGLE, EAGLE Foodservice will replace, without charge, any defective parts or component material upon demonstration to its satisfaction that a breach of warranty did not exist. Under no circumstances will we be liable for any claims for labor or subsequent damage. There are no warranties which extend beyond these warranties. All other expressed or implied warranties, including those of merchantability or fitness for a particular purpose, which exceed the warranties stated above, are disclaimed by EAGLE Foodservice and excluded from this agreement. No employee or agent of ours has any authority to make any representation or warranty which exceeds the warranties stated above.

NO EAGLE EQUIPMENT MAY BE RETURNED EXCEPT UPON WRITTEN AUTHORIZATION FROM EAGLE FOODSERVICE EQUIPMENT. SEE PAGE 384 FOR TERMS & CONDITIONS.

EAGLE Foodservice Equipment is a division of EAGLE GROUP. (formerly known as Metal Masters)


WARRANTY INFORMATION Limited Warranty for Hot Food Table Buffet Equipment, Cold Pan Units, Portable Food Warming Equipment, Heated Drawers, and Transport Holding Cabinets EAGLE Foodservice Equipment warrants to the original owner that goods supplied hereunder manufactured by EAGLE Foodservice Equipment will be free from defects in materials and workmanship for a period of one year from date of original installation, not to exceed 18 months from date of shipment from the factory. EAGLE Foodservice Equipment will replace, without charge, any defective parts or component material, upon demonstration to its satisfaction that a breach of warranty did not exist. Contact factory for a listing of the authorized parts and service centers near you or call the factory for assistance. This warranty does not cover any cost associated with maintenance, misuse, abuse, improper installation, pilot light adjustments, pilot outage, improper ventilation, adjustments, alteration, calibration, wrong voltage, wrong gas, voltage or gas conversions, resetting of circuit breakers or safety controls, overtime charges, mileage in excess of 100 miles, operation contrary to the installation and operating instructions, damage caused by flood, fire, or acts of God. This warranty shall not apply if the nameplate has been removed or altered. There are no warranties, which extend beyond these warranties. All other expressed or implied warranties, including those of merchantability or fitness for a particular purpose, which exceed the warranties stated above, are disclaimed by EAGLE Foodservice Equipment and excluded from this agreement. No employee or agent of ours has any authority to make any representation or warranty, which exceeds the warranties stated above.

NO EAGLE FOODSERVICE EQUIPMENT MAY BE RETURNED EXCEPT UPON WRITTEN AUTHORIZATION FROM EAGLE FOODSERVICE EQUIPMENT.

* * *

Limited Warranty for Cooking Equipment—including but not limited to all Gas and Electric Griddles, all Gas and Electric Charbroilers, all Gas and Electric Hot Plates, and all Gas and Electric Fryers EAGLE Foodservice Equipment warrants to the original owner that goods supplied hereunder manufactured by EAGLE Foodservice Equipment will be free from defects in materials and workmanship for a period of one year from date of original installation, not to exceed 18 months from date of shipment from the factory. EAGLE Foodservice Equipment will replace, without charge, any defective parts or component material, upon demonstration to its satisfaction that a breach of warranty did not exist. Contact factory for a listing of the authorized parts and service centers near you or call the factory for assistance. This warranty does not cover any cost associated with maintenance, misuse, abuse, improper installation, pilot light adjustments, pilot outage, improper ventilation, adjustments, alteration, calibration, wrong voltage, wrong gas, voltage or gas conversions, resetting of circuit breakers or safety controls, overtime charges, mileage in excess of 100 miles, operation contrary to the installation and operating instructions, damage caused by flood, fire, or acts of God. This warranty shall not apply if the nameplate has been removed or altered. INTENDED FOR OTHER THAN HOUSEHOLD USE. THESE COMMERCIAL APPLIANCES MUST BE INSTALLED WITHIN SURROUNDINGS AND VENTILATION REQUIREMENTS AS DICTATED BY NATIONAL AND/OR LOCAL CODE. There are no warranties, which extend beyond these warranties. All other expressed or implied warranties, including those of merchantability or fitness for a particular purpose, which exceed the warranties stated above, are disclaimed by EAGLE Foodservice Equipment and excluded from this agreement. No employee or agent of ours has any authority to make any representation or warranty, which exceeds the warranties stated above.

NO EAGLE FOODSERVICE EQUIPMENT MAY BE RETURNED EXCEPT UPON WRITTEN AUTHORIZATION FROM EAGLE FOODSERVICE EQUIPMENT.

* * *

EAGLE Underbar Warranty EAGLE Foodservice Equipment warrants that goods supplied hereunder manufactured by EAGLE Foodservice Equipment will be free from defects in material and construction at the time they leave our factory. Within a period of one year from the date of original installation of the equipment not to exceed 18 months from date of shipment from EAGLE, EAGLE Foodservice Equipment will replace without charge any defective parts or component material upon demonstration to its satisfaction that a breach of warranty did not exist. This warranty applies to parts or component material only. All parts, whether covered by warranty or purchased for replacement or repair, will be shipped FOB Factory. All parts returned to the factory must be shipped prepaid. Under no circumstances will we be liable for any claims for labor or subsequent damage. WARRANTY AUTOMATICALLY BECOMES NULL AND VOID IF UNDERBAR UNIT HAS BEEN USED WITH A GAS BURNER. There are no warranties which extend beyond these warranties. All other expressed or implied warranties, including those of merchantability or fitness for a particular purpose, which exceed the warranties stated above, are disclaimed by EAGLE foodservice Equipment and excluded from this agreement. No employee or agent of ours has any authority to make any representation or warranty which exceeds the warranties stated above.

NO EAGLE FOODSERVICE EQUIPMENT MAY BE RETURNED EXCEPT UPON WRITTEN AUTHORIZATION FROM EAGLE FOODSERVICE EQUIPMENT.

* * *

PancoÂŽ Transport Systems Warranty EAGLE Foodservice Equipment warrants to the original owner that goods supplied hereunder manufactured by EAGLE Foodservice Equipment will be free from defects in materials and workmanship for a period of one year from date of original installation, not to exceed 18 months from date of shipment from the factory. EAGLE Foodservice Equipment will replace, without charge, any defective parts or component material, upon demonstration to its satisfaction that a breach of warranty did not exist. Contact factory for a listing of the authorized parts and service centers near you or call the factory for assistance. This warranty does not cover any cost associated with maintenance, misuse, abuse, improper installation, alteration, operation contrary to the installation and operating instructions, damage caused by flood, fire, or acts of God. This warranty shall not apply if the nameplate has been removed or altered. There are no warranties, which extend beyond these warranties. All other expressed or implied warranties, including those of merchantability or fitness for a particular purpose, which exceed the warranties stated above, are disclaimed by EAGLE Foodservice Equipment and excluded from this agreement. No employee or agent of ours has any authority to make any representation or warranty, which exceeds the warranties stated above.

NO EAGLE FOODSERVICE EQUIPMENT MAY BE RETURNED EXCEPT UPON WRITTEN AUTHORIZATION FROM EAGLE FOODSERVICE EQUIPMENT.


- Table of Contents -

How to order:

Detailed contents listing at the start of each individual section.

EAGLE’S Customer Service Center

Shelving / Retail Display..................5-92 Wall Shelves ............................93-102

Committed to customer service and customer satisfaction along with quality products. Toll Free: 1-800-441-8440 Phone: (302) 653-3000 Fax: (302) 653-2065 Email: customerservice@eaglegrp.com

Tables....................................103-146 VISIT US ON THE WEB

Sinks / Floor Troughs..................147-188

To find an EAGLE representative, dealer or service center in your area go to www.eaglegrp.com

Hot Food Tables........................189-212 STOCK STATUS IS INDICATED BY:

Director’s Choice® Cafeteria Line....213-231

MTS (•) - make-to-stock items with shipment same day or next day. MTO ( ) - make-to-order items.

Cooking / Warming Equipment ......233-248 LOOK!

Underbar Equipment ..................249-284

Dishtables ..............................285-297

Ventilation Hoods ....299-303

FOR THESE EMBLEMS

Located to the right of or below each appropriate product title and/or product subtitle: see spec sheet EG10.42 - catalog spec sheet reference (available online www.eaglegrp.com)

- approved by the National Sanitation Foundation - approved by the Canadian Standard Association (gas units)

............................305-335

- approved by Underwriters Laboratories for U.S.A. ONLY - approved by Underwriters Laboratories for use in Canada and U.S.A.

Custom Options & Accessories ................................337-340 SpecFAB® Custom Fabrications ................................341-348 Terms & Conditions ....................................................384 Distribution Locations ................................................384 Warranty Information ..................................................1-2 Alphanumeric Price Index ......................................349-383

- approved by Underwriters Laboratories for use in Canada and U.S.A. (gas-fired units) - recognized component by Underwriters Laboratories NFPA-96 - Meets the standards of the National Fire Protection Association, Bulletin #96

REGISTERED TRADEMARKS OF EAGLE FOODSERVICE EQUIPMENT - a division of EAGLE GROUP Add-A-Shelf®, adjusTable®, Chef’s Line®, Director’s Choice®, EAGLEbrite®, EAGLEgard®, FLEX-MASTER®, Floor-Trak®, LIFESTOR®, MasterSeal®, Master Trak®, MICROGARD®, PANCO®, Quad-Adjust®, QuadTruss®, Quik-Set®, REDHOTS®, Redi-Pak®, SPEC AIR®, Spec-Bar®, SpecFAB®, SPEC-MASTER®, Snap-n-Slide®, uni-lok®, Uni-Wall®, Valu-Gard®, VALU-MASTER®, and WALSTOR® TRADEMARKS OF EAGLE FOODSERVICE EQUIPMENT - a division of EAGLE GROUP Lok-n-Fold™, Shelf Select™, Spec-Bar Select™, STAND-OUTS™, and TEMP-GARD™


EAGLE GROUP 1860 shelf shown EAGLE GROUP shelves incorporate more serpentine trusses (both perimeter and interior) and mat continuity support wires than any competitive shelf, which translates into more strength per shelf. support wire .187˝ diameter (6 gauge)

1˝ O.D. grooved post

EAGLEg ® ard fin is with MIC h standard ROGARD ® protecti on. See page 6 for deta ils.

mat wires .135˝ diameter (10 gauge)

shelf collar

EAGLE’s patented QuadTruss® design (U.S. Patent #5,390,803) uses four truss wires for up to 25% greater strength!!!

3 trusses (2 QuadTruss) 4 support wires

1.635˝

split sleeve

patented QuadTruss® 4-wire design – up to 25% stronger

straight line lower truss wire

adjustable foot

bottom truss wire .250˝ diameter (2 gauge) post with stamped numbers calibrated every inch

truss wire .187˝ diameter (6 gauge)

see

end

End View

The EAGLE Advantage — quality, value, reliability!

vie

w

Metro and most imported shelving 1860 shelf shown Metro shelving incorporates both perimeter and interior serpentine trusses and mat continuity support wires, but fewer than EAGLE GROUP. support wire .192˝ diameter (6 gauge)

1˝ O.D. grooved post

mat wires .135˝ diameter (10 gauge)

shelf collar 1.500˝

3 trusses 2 support wires

split sleeve

bottom truss wire .250˝ diameter (2 gauge)

bent lower truss wire to align with collar

post with numbers calibrated every other inch

Only three truss wires

standard 3-wire truss design truss wire .175˝ diameter (7 gauge)

End View

see end view

adjustable foot

ISS shelf 1860 shelf shown ISS shelving uses no perimeter serpentine trusses, relying on perimeter line wires connected by waterfall mat wires for support with serpentine trusses - used interior only. support wire .225˝ diameter (4 gauge)

1˝ O.D. grooved post

mat wires .148˝ diameter (9 gauge)

shelf collar 3 trusses 2 support wires

one piece split sleeves

bottom line wire .225˝ diameter (4 gauge) post with stencilled numbers calibrated every inch adjustable foot

Only two line wires (no serpentine truss)

truss wire .177˝ diameter (7 gauge) 2-line wire design

see e nd

view

End View


Shelving / Retail Display Accessories/Components Casters ......................11, 12, 62, 75, 80 Inlays ................................................62 Label Holders ..............................22, 39 Ledges ..................................50, 63, 81 “S” Hooks ..........................................48 More Accessories and Components............10-12, 48-55

Add-A-Shelf® and Accessories ..............19-20 Cantilever Shelving System Wall Mount ....................87-91 Carts Cart Covers ........................................31 Hardwood Top Demo & Wine Carts ..66 Merchandising Carts ....................32-33 Polymer Utility Carts..........................83 Utility Carts ......................22, 27-29, 83 Stem Caster Carts..............................30

Dolly Frames / Dolly Trucks Dolly Frames......................................39 Dolly Trucks ......................................34 Aluminum Truck Dollies ....................38

LIFESTOR® Polymer Shelving Accessories/Components ............80-82 Add-On Units ....................................78 Dunnage Racks..................................83 Floor-Trak® Storage Systems ............84 Shelving / Posts ..........................79-80 Starter Units ......................................77 Utility Carts ........................................83 Overhead Track Storage Systems ....................85-86

Posts ..........................10, 20

Quik-Set® Solid Shelving ....72-76 Racks and Platforms Beer Keg Racks/Accessories..............60 Dunnage Racks ............................36-38 Platforms ..........................................35 Polymer Dunnage Racks....................37 Syrup Tank Racks/Accessories ..........44 Wire Can Rack/Systems ....................26

Red-i-Pak® Utility Carts ........................................22 Wire Shelving Units ..........................21

Retail Display Shelving and Accessories Accessories/Components ............62-65 Decorative Shelves ............................61 Front Case Merchandise Shelving......65 Garment Racks/Accessories ..............35 Gondola Shelving/Accessories ....68-70 Plate Display Shelving/Accessories....26 Pot/Pan Rack/Accessories ................67 Retail Display Workstations ..............66 Secure Display Merchandiser ............67 Soft Goods Display ............................64 Wire Display Shelving/ Accessories ..............................70-71

Security Units and Accessories ..............40-43 Shelves / Shelving Units Adjustable Wire Shelving • Add-A-Shelf® ..............................19-20 • Quad-Adjust®..................................8-9 Cantilever Shelves........................26, 64 Double-Mat Shelves/Starter Units......23 Dunnage Shelves/Starter Units ....36-37

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

Four-/Five-Shelf Add-On Units ......................9, 16-18 Four-/Five-Shelf Starter Units ......15-17 Reverse Mat Shelves/ Label Holders ............................9, 22 Seismic Shelves/Posts ......................14 Slanted Shelves ................................49 Sliding Shelves ..................................53 Solid Shelves/Accessories ................13 Triangle Shelf ....................................29 Wire Basket Shelves ..........................39 Wire Shelves........................................7

Shelving Task Stations Packages Biscuit Workstation............................46 Carry-Out Worktable ..........................46 Cup Tower..........................................46 Drive-Through Task Station ..............46 Microwave Prep Table........................46 Pizza Carry-Out Workstation..............46 Pizza Prep Area..................................46 Sandwich Prep Station ......................46

Tables ..............................47 Track Systems Floor Track Storage Systems ................58-59, 84 Overhead Track Storage Systems............56-57, 85-86

Wine Shelves and Components ..............24-25 Workstations Mobile Computer Workstations ........45 Modular Desks Workstations ............45

For Wall Shelves, see pages 93–102.

5


SHELF AND POST FINISHES AVAILABLE Stainless Steel Finish—OUR BEST! Stainless Steel • NSF-listed for all environments. • Type 304 stainless steel. NOTE: Stainless steel shelving is electropolished.

15-YEAR LIMITED WARRANTY

EAGLEgard® Hybrid Epoxy Zinc Chloride Clear Chromate MasterSeal® Sealer Blue Green (translucent) - hybrid epoxy with MICROGARD®* • NSF-listed for all environments. • Zinc chloride plating followed by clear chromate plating with MasterSeal® Sealer and a hybrid epoxy final coat.

15-YEAR LIMITED WARRANTY

Valu-Gard® Green Epoxy Phosphate Conversion Coating MasterSeal® Sealer Green (opaque) - hybrid metallic epoxy • NSF-listed for wet or dry storage environments. • Phosphate conversion coating followed by green hybrid epoxy coating.

5-YEAR LIMITED WARRANTY

VALU-MASTER® Gray Epoxy Phosphate Conversion Coating MasterSeal® Sealer Pewter Gray Epoxy • NSF-listed for wet or dry storage environments. • Phosphate conversion coating followed by metallic gray epoxy coating.

5-YEAR LIMITED WARRANTY

Bright Nickel Chrome Air-dry Lacquer 1-YEAR LIMITED WARRANTY

EAGLEbrite® Zinc Zinc chloride Clear Chromate MasterSeal® Sealer • NSF-listed for dry storage environments. • Bright zinc chloride plating followed by clear chromate plating with MasterSeal® sealer for improved rust protection. NOTE: Wire shelves feature MasterSeal® Sealer. NSF-listed for all environments.

Go Green. Go Eagle. Look for the tag on the bar code

Chrome Finish

• NSF-listed for dry storage environments. • Bright nickel plating followed by chrome plating. NOTE: Optional clear hybrid epoxy, NSF-listed for all environments, is available.

• an antimicrobial agent which contains built-in protection to retard the growth of a broad range of bacteria, mold and mildew on shelf surface that causes stains, odors and degradation • combines inorganic antimicrobial silver ions with a patented delivery system. The silver ions react with bacteria in three ways: 1) suffocates the cell, 2) stops the cell reproduction system, and 3) stops the cell from growing • standard on all EAGLEgard® shelving

3-YEAR LIMITED WARRANTY

The numbers don’t lie. Eagle’s efforts to consume less, emit less and conserve more are beginning to bear fruit. The leaves below show just some of what we now accomplish each year.


SHELVING / RETAIL DISPLAY Catalog Section 1

Wire Shelves see spec sheet

EG01.00 WEIGHT CAPACITY:

• 800 lb. (363 kg); shelves up to 48˝ long. • 600 lb. (272 kg); shelves 54˝ through 72˝ long. - evenly distributed static load. Note:

Patented QuadTruss® Design

14˝ width (356mm)

18˝ width (457mm)

21˝ width (533mm)

24˝ width (610mm)

30˝ width (762mm)

36˝ width (914mm)

length weight in. mm lb. kg

cu ft

24˝ 30˝ 36˝ 42˝ 48˝ 54˝ 60˝ 72˝ 24˝ 30˝ 36˝ 42˝ 48˝ 54˝ 60˝ 72˝ 24˝ 30˝ 36˝ 42˝ 48˝ 54˝ 60˝ 72˝ 24˝ 30˝ 36˝ 42˝ 48˝ 54˝ 60˝ 72˝ 30˝ 36˝ 48˝ 60˝ 72˝ 36˝ 48˝ 60˝ 72˝

0.5 0.5 0.5 0.7 0.7 0.9 0.9 1.1 0.7 0.7 0.7 0.9 0.9 1.2 1.2 1.3 0.7 0.7 0.8 1.1 1.1 1.3 1.3 1.4 0.8 0.8 0.8 1.2 1.2 1.5 1.5 1.6 1.0 1.0 1.5 1.8 2.3 1.3 1.9 2.3 2.8

6 7 8 9 10 12 14 17 7 8 9 11 12 15 17 20 8 9 11 12 14 16 18 24 9 11 13 15 16 19 21 26 16 17 20 25 30 21 26 34 43

2.7 3.2 3.6 4.1 4.5 5.5 6.4 7.7 3.2 3.6 4.1 5.0 5.5 6.8 7.7 9.1 3.6 4.1 5.0 5.5 6.4 7.3 8.2 10.9 4.1 5.0 5.9 6.8 7.3 8.6 9.5 11.8 7.3 7.7 9.1 11.4 13.6 9.5 11.8 15.4 19.5

EAGLEbrite® model # list 1424Z • 51 1430Z • 54 1436Z • 57 1442Z • 63 1448Z • 67 1454Z • 74 1460Z • 79 1472Z • 92 1824Z • 62 1830Z • 64 1836Z • 67 1842Z • 75 1848Z • 78 1854Z • 89 1860Z • 92 1872Z • 107 2124Z • 68 2130Z • 71 2136Z • 74 2142Z • 81 2148Z • 84 2154Z • 101 2160Z • 103 2172Z • 125 2424Z • 74 2430Z • 76 2436Z • 79 2442Z • 92 2448Z • 94 2454Z • 113 2460Z • 115 2472Z • 133 3030Z 95 3036Z • 97 3048Z • 118 3060Z • 156 3072Z • 183 3636Z • 113 3648Z • 134 3660Z • 182 3672Z • 215

chrome model # list 1424C • 54 1430C • 57 1436C • 63 1442C • 73 1448C • 75 1454C • 79 1460C • 84 1472C • 98 1824C • 63 1830C • 66 1836C • 68 1842C • 79 1848C • 81 1854C • 93 1860C • 96 1872C • 114 2124C • 72 2130C • 78 2136C • 80 2142C • 91 2148C • 93 2154C • 106 2160C • 108 2172C • 132 2424C • 79 2430C • 81 2436C • 84 2442C • 99 2448C • 102 2454C • 118 2460C • 120 2472C • 143 3030C 109 3036C • 112 3048C • 131 3060C • 176 3072C • 201 3636C • 125 3648C • 146 3660C • 204 3672C • 235

• 24˝ - 48˝ lengths: Four per box. • 54˝ - 72˝ lengths: Two per box. • Four pairs of split sleeves per shelf. Freight class is 70.0.

makes shelves up to 25% stronger and provides a retaining ledge for increased strength and product retention.

(Patent #5,390,803)

610 762 914 1067 1219 1372 1524 1829 610 762 914 1067 1219 1372 1524 1829 610 762 914 1067 1219 1372 1524 1829 610 762 914 1067 1219 1372 1524 1829 762 914 1219 1524 1829 914 1219 1524 1829

PACKAGING:

Shelving units should not exceed 2400 lbs. (1089 kg) per set of four posts.

(•) MTS (made to stock) / ( ) MTO (made to order)

Valu-Master® model # list 1424V • 56 1430V • 59 1436V • 65 1442V • 76 1448V • 78 1454V • 81 1460V • 93 1472V • 101 1824V • 65 1830V • 72 1836V • 77 1842V • 85 1848V • 93 1854V • 101 1860V • 107 1872V • 129 2124V • 75 2130V • 79 2136V • 89 2142V • 96 2148V • 101 2154V • 114 2160V • 122 2172V • 143 2424V • 80 2430V • 89 2436V • 94 2442V • 104 2448V • 115 2454V • 128 2460V • 137 2472V • 162 3030V 131 3036V 133 3048V 148 3060V 189 3072V 208 3636V 141 3648V 182 3660V 214 3672V 255

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

Valu-Gard® model # list 1424VG • 56 1430VG • 59 1436VG • 65 1442VG • 76 1448VG • 78 1454VG • 81 1460VG • 93 1472VG • 101 1824VG • 65 1830VG • 72 1836VG • 77 1842VG • 85 1848VG • 93 1854VG • 101 1860VG • 107 1872VG • 129 2124VG • 75 2130VG • 79 2136VG • 89 2142VG • 96 2148VG • 101 2154VG • 114 2160VG • 122 2172VG • 143 2424VG • 80 2430VG • 89 2436VG • 94 2442VG • 104 2448VG • 115 2454VG • 128 2460VG • 137 2472VG • 162 3030VG 131 3036VG 133 3048VG 148 3060VG 189 3072VG 208 3636VG 141 3648VG 182 3660VG 214 3672VG 255

EAGLEgard® model # list 1424E • 67 1430E • 71 1436E • 74 1442E • 84 1448E • 89 1454E • 93 1460E • 98 1472E • 113 1824E • 78 1830E • 80 1836E • 83 1842E • 98 1848E • 101 1854E • 116 1860E • 119 1872E • 137 2124E • 89 2130E • 92 2136E • 94 2142E • 107 2148E • 109 2154E • 127 2160E • 131 2172E • 160 2424E • 97 2430E • 99 2436E • 102 2442E • 121 2448E • 125 2454E • 144 2460E • 147 2472E • 173 3030E 133 3036E • 135 3048E • 157 3060E • 205 3072E • 219 3636E • 154 3648E • 195 3660E • 216 3672E • 256

stainless model # 1424S 1430S 1436S • 1442S 1448S • 1454S 1460S • 1472S • 1824S • 1830S • 1836S • 1842S • 1848S • 1854S 1860S • 1872S • 2124S 2130S 2136S • 2142S 2148S • 2154S 2160S • 2172S 2424S • 2430S • 2436S • 2442S • 2448S • 2454S • 2460S • 2472S • 3030S 3036S 3048S 3060S 3072S 3636S 3648S 3660S 3672S

list 198 201 203 247 248 308 318 358 245 247 251 296 299 376 381 452 282 285 287 332 334 440 442 524 306 308 312 373 375 459 461 576 377 400 466 536 628 446 528 615 731

7


SHELVING / RETAIL DISPLAY Catalog Section 1

Quad-Adjust® Wire Shelving see spec sheet

• Shelves feature special interlocking corners that fit in collars mounted to split sleeves, allowing addition or removal of a shelf without the need to disassemble the entire shelf unit. • Tapered split sleeves create a positive lock that becomes stronger as the load increases. • Posts (page 10) are numbered in increments of 1˝ (25mm) to ensure fast and level assembly. • Leveling feet are provided to help compensate for uneven floor surfaces. • Shelves utilize patented QuadTruss® design: the mat wires are sandwiched between two top truss wires, adding significant strength and distributing the entire load without stress and strain on the welds.

EG01.14

PATENT ! PENDING (Patent #5,390,803)

Each shelf corner fits in collar mounted to split sleeve

FEATURES:

Note:

To create a mobile shelf unit, top and bottom shelves must be standard shelves (page 7).

Patented QuadTruss® Design

Quad-Adjust ® shelves assembled with posts (see page 10 for posts)

makes shelves up to 25% stronger and provides a retaining ledge for increased strength and product retention.

Weight capacities and packaging are the same as that of Wire Shelves (page 7). Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Quad-Adjust® Shelves

14˝ width (356mm)

18˝ width (457mm)

21˝ width (533mm)

24˝ width (610mm)

Note:

8

length weight in. mm lb. kg

cu ft

24˝ 30˝ 36˝ 42˝ 48˝ 54˝ 60˝ 72˝ 24˝ 30˝ 36˝ 42˝ 48˝ 54˝ 60˝ 72˝ 24˝ 30˝ 36˝ 42˝ 48˝ 54˝ 60˝ 72˝ 24˝ 30˝ 36˝ 42˝ 48˝ 54˝ 60˝ 72˝

0.5 0.5 0.5 0.7 0.7 0.9 0.9 1.1 0.7 0.7 0.7 0.9 0.9 1.2 1.2 1.3 0.8 0.8 0.8 1.1 1.1 1.3 1.3 1.4 0.8 0.8 0.8 1.2 1.2 1.5 1.5 1.6

610 762 914 1067 1219 1372 1524 1829 610 762 914 1067 1219 1372 1524 1829 610 762 914 1067 1219 1372 1524 1829 610 762 914 1067 1219 1372 1524 1829

6 2.7 7 3.2 8 3.6 9 4.1 10 4.6 12 5.5 14 6.4 17 7.7 7 3.2 8 3.6 9 4.1 11 5.0 12 5.5 15 6.8 17 7.7 20 9.1 8 3.6 9 4.1 11 5.0 12 5.5 14 6.4 16 7.3 18 8.2 24 10.9 9 4.1 11 5.0 13 5.9 15 6.8 16 7.3 19 8.6 21 9.5 26 11.8

EAGLEbrite® model # list QA1424Z 80 QA1430Z 83 QA1436Z 86 QA1442Z 93 QA1448Z 97 QA1454Z 103 QA1460Z 108 QA1472Z 121 QA1824Z 92 QA1830Z 94 QA1836Z 97 QA1842Z 104 QA1848Z 107 QA1854Z 119 QA1860Z 121 QA1872Z 137 QA2124Z 98 QA2130Z 100 QA2136Z 103 QA2142Z 111 QA2148Z 114 QA2154Z 131 QA2160Z 133 QA2172Z 155 QA2424Z 103 QA2430Z 105 QA2436Z 108 QA2442Z 121 QA2448Z 123 QA2454Z 142 QA2460Z 144 QA2472Z 162

chrome model # list QA1424C 87 QA1430C 91 QA1436C 93 QA1442C 102 QA1448C 104 QA1454C 108 QA1460C 114 QA1472C 127 QA1824C 93 QA1830C 96 QA1836C • 98 QA1842C 108 QA1848C 111 QA1854C 122 QA1860C 125 QA1872C 143 QA2124C 104 QA2130C 107 QA2136C 109 QA2142C 120 QA2148C 122 QA2154C 136 QA2160C 138 QA2172C 161 QA2424C 108 QA2430C 111 QA2436C 114 QA2442C 128 QA2448C • 132 QA2454C 147 QA2460C 149 QA2472C 173

VALU-MASTER® model # list QA1424V 83 QA1430V 88 QA1436V 95 QA1442V 105 QA1448V 107 QA1454V 111 QA1460V 122 QA1472V 131 QA1824V 92 QA1830V 101 QA1836V • 106 QA1842V 115 QA1848V • 122 QA1854V 131 QA1860V • 137 QA1872V 159 QA2124V 100 QA2130V 108 QA2136V 119 QA2142V 125 QA2148V 131 QA2154V 141 QA2160V 143 QA2172V 173 QA2424V 109 QA2430V 119 QA2436V • 123 QA2442V 134 QA2448V • 144 QA2454V 158 QA2460V • 166 QA2472V 192

Valu-Gard® model # list QA1424VG 83 QA1430VG 88 QA1436VG 95 QA1442VG 105 QA1448VG 107 QA1454VG 111 QA1460VG 122 QA1472VG 131 QA1824VG 92 QA1830VG 101 QA1836VG • 106 QA1842VG 115 QA1848VG • 122 QA1854VG 131 QA1860VG • 137 QA1872VG 159 QA2124VG 100 QA2130VG 108 QA2136VG 119 QA2142VG 125 QA2148VG 131 QA2154VG 141 QA2160VG 143 QA2172VG 173 QA2424VG 109 QA2430VG 119 QA2436VG • 123 QA2442VG 134 QA2448VG • 144 QA2454VG 158 QA2460VG • 166 QA2472VG 192

EAGLEgard® model # list QA1424E 97 QA1430E 100 QA1436E 103 QA1442E 114 QA1448E 119 QA1454E 122 QA1460E 127 QA1472E 142 QA1824E 107 QA1830E 109 QA1836E • 113 QA1842E 127 QA1848E • 131 QA1854E 145 QA1860E • 148 QA1872E 166 QA2124E 119 QA2130E 121 QA2136E 123 QA2142E 137 QA2148E 139 QA2154E 157 QA2160E 160 QA2172E 189 QA2424E 126 QA2430E 128 QA2436E • 132 QA2442E 151 QA2448E • 155 QA2454E 174 QA2460E • 177 QA2472E 202

MICROGARD® antimicrobial protection standard on all EAGLEgard® shelving. 100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

stainless steel model # list QA1424S 249 QA1430S 253 QA1436S 255 QA1442S 304 QA1448S 305 QA1454S 373 QA1460S 382 QA1472S 427 QA1824S 302 QA1830S 304 QA1836S 307 QA1842S 358 QA1848S 361 QA1854S 447 QA1860S 453 QA1872S 532 QA2124S 343 QA2130S 346 QA2136S 348 QA2142S 398 QA2148S 400 QA2154S 518 QA2160S 521 QA2172S 612 QA2424S 369 QA2430S 372 QA2436S 376 QA2442S 443 QA2448S 446 QA2454S 539 QA2460S 542 QA2472S 669


SHELVING / RETAIL DISPLAY Catalog Section 1

Quad-Adjust® Wire Shelving (continued) see spec sheet

EG01.14

Quad-Adjust® Reverse Mat Shelves length weight cu in. mm lb. kg ft

EAGLEbrite® model # list QAR1424Z 85 QAR1436Z 92 QAR1448Z 99 QAR1824Z 98 QAR1836Z 103 QAR1848Z 115 QAR2136Z 109 QAR2148Z 121 QAR2424Z 109 QAR2436Z 116 QAR2448Z 131

chrome model # list QAR1424C 93 QAR1436C 99 QAR1448C 111 QAR1824C 99 QAR1836C 104 QAR1848C 118 QAR2136C 117 QAR2148C 129 QAR2424C 116 QAR2436C 121 QAR2448C 140

VALU-MASTER® model # list QAR1424V 88 QAR1436V 101 QAR1448V 115 QAR1824V 98 QAR1836V 113 QAR1848V 129 QAR2136V 126 QAR2148V 139 QAR2424V 117 QAR2436V 131 QAR2448V 154

24˝ 610 6 2.7 0.5 36˝ 914 8 3.6 0.5 (356mm) 48˝ 1219 10 4.6 0.7 24˝ 610 7 3.2 0.7 18˝ 36˝ 914 9 4.1 0.7 (457mm) 48˝ 1219 12 5.5 0.9 21˝ 36˝ 914 11 5.0 0.8 (533mm) 48˝ 1219 14 6.4 1.1 24˝ 610 9 4.1 0.8 24˝ 36˝ 914 13 5.9 0.8 (610mm) 48˝ 1219 16 7.3 1.2 Note: MICROGARD® antimicrobial protection standard on all EAGLEgard® shelving.

14˝

Quad-Adjust® Starter Units FEATURES:

Consists of: - 2 wire shelves - 2 Quad-Adjust® shelves - 4 posts 74˝ (1880mm) tall

Valu-Gard® model # list QAR1424VG 88 QAR1436VG 101 QAR1448VG 115 QAR1824VG 98 QAR1836VG 113 QAR1848VG 129 QAR2136VG 126 QAR2148VG 139 QAR2424VG 117 QAR2436VG 131 QAR2448VG 154

EAGLEgard® model # list QAR1424E 103 QAR1436E 109 QAR1448E 126 QAR1824E 115 QAR1836E 120 QAR1848E 139 QAR2136E 131 QAR2148E 147 QAR2424E 135 QAR2436E 140 QAR2448E 164

stainless steel model # list QAR1424S 265 QAR1436S 271 QAR1448S 325 QAR1824S 321 QAR1836S 327 QAR1848S 384 QAR2136S 371 QAR2148S 425 QAR2424S 393 QAR2436S 400 QAR2448S 475

• Convenient easy to order starter unit kits. • Each starter unit consists of two standard wire shelves, two Quad-Adjust® shelves, and four 74˝ (1880mm) posts. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

(Patent #5,390,803)

18˝ (457mm)

24˝ (610mm)

chrome VALU-MASTER® Valu-Gard® EAGLEgard® stainless steel model # list model # list model # list model # list model # list F2QA2-74-1836C • 440 F2QA2-74-1836V • 478 F2QA2-74-1836VG • 478 F2QA2-74-1836E • 516 F2QA2-74-1836S 1408 F2QA2-74-1848C 492 F2QA2-74-1848V • 542 F2QA2-74-1848VG • 542 F2QA2-74-1848E • 588 F2QA2-74-1848S 1612 F2QA2-74-1860C 550 F2QA2-74-1860V • 600 F2QA2-74-1860VG • 600 F2QA2-74-1860E • 658 F2QA2-74-1860S 1960 F2QA2-74-1872C 622 F2QA2-74-1872V 688 F2QA2-74-1872VG 688 F2QA2-74-1872E 730 F2QA2-74-1872S 2260 F2QA2-74-2436C 504 F2QA2-74-2436V • 546 F2QA2-74-2436VG • 546 F2QA2-74-2436E • 592 F2QA2-74-2436S 1668 F2QA2-74-2448C • 576 F2QA2-74-2448V • 630 F2QA2-74-2448VG • 630 F2QA2-74-2448E • 684 F2QA2-74-2448S 1934 F2QA2-74-2460C 646 F2QA2-74-2460V • 518 F2QA2-74-2460VG • 518 F2QA2-74-2460E • 772 F2QA2-74-2460S 2298 F2QA2-74-2472C 740 F2QA2-74-2472V 820 F2QA2-74-2472VG 820 F2QA2-74-2472E 874 F2QA2-74-2472S 2782

MICROGARD® antimicrobial protection standard on all EAGLEgard® shelving.

HOW TO ASSEMBLE:

Note:

length weight cu EAGLEbrite® in. mm lb. kg ft model # list 36˝ 914 65 40 2.7 F2QA2-74-1836Z 436 48˝ 1219 78 36 3.6 F2QA2-74-1848Z 478 60˝ 1524 102 46 4.3 F2QA2-74-1860Z 534 72˝ 1819 117 53 5.1 F2QA2-74-1872Z 596 36˝ 914 81 37 3.6 F2QA2-74-2436Z 482 48˝ 1219 98 45 4.6 F2QA2-74-2448Z 542 60˝ 1524 122 55 5.7 F2QA2-74-2460Z 626 72˝ 1819 149 68 6.9 F2QA2-74-2472Z 698

Numerically calibrated grooved posts, tapered plastic split sleeves and shelf collars combine to make shelving assembly a SIMPLE 3 STEP EXERCISE:

2.

1. Snap the split sleeves onto a post over the number of your choice.

Attach the Quad-Adjust slotted collar onto the split sleeves.

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

®

3. Slide shelf into slotted collar to complete.

9


SHELVING / RETAIL DISPLAY Catalog Section 1

Posts see spec sheets EG01.00

EG01.01

EG01.11

EG01.14 FEATURES:

• Height includes leveling bolt insert and cap. • EAGLEbrite® posts feature air-dry lacquer and can be used for walk-in coolers. Notes: For special length post, apply price at next higher length plus a cutting charge of $11.00 list per post.

Posts are numbered on vertical 1˝ (25mm) increments to help ensure fast and level assembly.

Freight class is 50.0. (•) MTS (made to stock) / ( ) MTO (made to order)

For Stationary Applications height in. mm

cu ft

weight lb. kg

EAGLEbrite® model # list P7-Z • 13 P14-Z • 16 P18-Z • 17 P33-Z • 19 P54-Z • 23 P63-Z • 24 P74-Z • 27 P86-Z • 33 n/a

chrome model # list P7-C 13 P14-C • 16 P18-C • 18 P33-C • 19 P54-C • 23 P63-C • 24 P74-C • 27 P86-C • 33 P96-C •* 39

Valu-Gard® model # list P7-VG 15 P14-VG 18 P18-VG 19 P33-VG • 20 P54-VG • 24 P63-VG • 26 P74-VG • 28 P86-VG • 35 n/a

VALU-MASTER® model # list P7-V 15 P14-V 18 P18-V 19 P33-V • 20 P54-V • 24 P63-V • 26 P74-V • 28 P86-V • 35 n/a

EAGLEgard® model #list P7-E • 15 P14-E • 18 P18-E 21 P33-E • 24 P54-E • 25 P63-E • 28 P74-E • 31 P86-E • 36 n/a

stainless steel model # list P7-S 31 P14-S 34 P18-S • 39 P33-S • 53 P54-S • 61 P63-S • 64 P74-S • 73 P86-S • 87 P96-S •* 92

VALU-MASTER® model # list CP7-V 15 CP14-V 18 CP18-V 19 CP33-V 20 CP54-V 24 CP63-V • 26 CP74-V • 28 CP86-V 35

EAGLEgard® model # list CP7-E 15 CP14-E 18 CP18-E 21 CP33-E 24 CP54-E 25 CP63-E • 28 CP74-E • 31 CP86-E • 36

stainless model # list CP7-S 31 CP14-S 34 CP18-S 39 CP33-S • 53 CP54-S 61 CP63-S • 64 CP74-S • 73 CP86-S 87

7˝ 178 0.1 1.0 0.5 14˝ 356 0.1 1.0 0.5 18˝ 457 0.1 1.5 0.7 33˝ 838 0.1 2.0 0.9 54˝ 1372 0.1 3.0 1.4 63˝ 1600 0.3 3.5 1.8 74˝ 1880 0.5 4.0 1.8 86˝ 2184 0.8 5.0 2.3 96˝ 2438 0.9 6.0 2.7 * 96˝ (2438mm) posts are NOT to be used on units less than 24˝ (610mm) front-to-back. Recommend using in conjunction with foot plates to affix to floor, and with post clamps where applicable.

For Mobile Applications — See page 11 for appropriate stem casters. height in. mm

cu ft

weight lb. kg

7˝ 14˝ 18˝ 33˝ 54˝ 63˝ 74˝ 86˝

0.1 0.1 0.1 0.1 0.1 0.3 0.5 0.8

1.0 1.0 1.5 2.0 3.0 3.5 4.0 5.0

178 356 457 838 1372 1600 1880 2184

0.5 0.5 0.7 0.9 1.4 1.8 1.8 2.3

EAGLEbrite® model # list CP7-Z 13 CP14-Z 16 CP18-Z 17 CP33-Z • 19 CP54-Z • 23 CP63-Z • 24 CP74-Z • 27 CP86-Z • 33

chrome model # list CP7-C 13 CP14-C 16 CP18-C 18 CP33-C • 19 CP54-C • 23 CP63-C • 24 CP74-C • 27 CP86-C • 33

Valu-Gard® model # list CP7-VG 15 CP14-VG 18 CP18-VG 19 CP33-VG • 20 CP54-VG 24 CP63-VG • 26 CP74-VG • 28 CP86-VG • 35

Stationary Wire Wall Mounts see spec sheet

END UNIT: EG02.12

MID UNIT:

• One single shelf support and mounting plate. • One double shelf support and mounting plate.

Designed for fixed application stationary wall mount (end unit)

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Note:

Shelves (page 7) sold separately.

End Units* length cu weight** chrome in. mm ft lbs. kg model # list 14˝ 356 0.5 6 2.7 WB14-C • 41 18˝ 457 0.5 8 3.6 WB18-C • 42 21˝ 533 0.7 10 4.5 WB21-C • 42 24˝ 610 0.7 12 5.5 WB24-C • 43

Valu-Gard® model # list WB14-VG • 41 WB18-VG • 42 WB21-VG 42 WB24-VG 43

Mid Units stainless** model # list WB14-S • 98 WB18-S • 102 WB21-S 105 WB24-S • 109

weight** chrome lbs. kg model # 8 3.6 DWB14-C • 10 4.5 DWB18-C • 12 5.5 DWB21-C 14 6.4 DWB24-C •

list 61 63 63 64

Valu-Gard® model # list DWB14-VG 61 DWB18-VG 63 DWB21-VG 63 DWB24-VG 64

*End Units priced per piece; **For stainless steel units, add 1 lb. (0.5 kg) weight.

10

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

stainless** model # list DWB14-S 146 DWB18-S 156 DWB21-S 159 DWB24-S 166


SHELVING / RETAIL DISPLAY Catalog Section 1

Stem Casters see spec sheet EG01.05A FEATURES:

• Use with posts. • Donut bumpers. • Swivel casters have a temperature rating of -15˚F. Note:

Add mobility to your stationary unit.

Decorative stem casters also available. See page 62. These casters cannot be used with Master Trak®.

Freight class is 65.0. (•) MTS (made to stock) / ( ) MTO (made to order)

resilient

Resilient

type stem/swivel stem/swivel stem/swivel stem/brake stem/rigid t

wheel diameter in. mm

wheel face in. mm

weight lbs. kg

cu ft

capacity lbs. kg

4˝ 5˝ 5˝ 5˝ 5˝

1˝ 1˝ 11⁄4˝ 11⁄4˝ 11⁄4˝

1.1 2.0 2.5 2.8 3.5

0.1 0.1 0.1 0.1 0.1

125 125 300 300 300

102 127 127 127 127

zinc

25 25 32 32 32

0.5 0.9 1.2 1.3 1.6

56.7 56.7 136.1 136.1 136.1

model # list CSS4-125 31 CSS5-125 36 CSS5-300 42 CSB5-300 49 CSR5-300 47

stainless steel capacity lbs. kg model # n/a n/a n/a n/a n/a n/a 200 90.7 CSS5S-200 200 90.7 CSB5S-200 200 90.7 CSR5S-200

list n/a n/a 147 169 122

Polyurethane

type stem/swivel stem/brake stem/rigid t

capacity lbs. kg

wheel diameter in. mm

wheel face in. mm

weight lbs. kg

cu ft

300 300 300

5˝ 5˝ 5˝

11⁄4˝ 11⁄4˝ 11⁄4˝

2.5 2.8 3.5

0.1 0.1 0.1

136.1 136.1 136.1

127 127 127

32 32 32

1.2 1.3 1.6

nickel plated stainless steel model # list model # CSS5P-300 43 CSS5PS-300 CSB5P-300 47 CSB5PS-300 CSR5P-300 48 CSR5PS-300

list 182 204 153 (nickel plated) swivel stem caster with polyurethane tread

Polymer Casters • With polyurethane wheel.

type stem/swivel stem/brake t Channel Please note:

type of capacity bearing lbs. kg delrin delrin

250 250

wheel face in. mm

weight lbs. kg

5˝ 5˝

11⁄4˝ 11⁄4˝

2.0 2.0

127 127

32 32

0.9 0.9

Frames for Rigid Stem Casters

weight lbs. kg

14˝ 18˝ 21˝ 24˝ 30˝ 36˝

1.5 2.0 2.5 2.8 3.5 4.0

0.7 0.9 1.1 1.3 1.6 1.8

cubic feet 0.1 0.1 0.1 0.1 0.1 0.1

model # A201706 A201007 A201008 A201009 A204795 A207562

cu ft model # 0.1 CPSS5-250 0.1 CPSB5-250

list 84 91

Replacement Donut Bumpers for Stem Casters

Shelf width must be known when ordering rigid stem casters in order to ship appropriate channel frame to lock rigid casters.

shelf width in. mm 356 457 533 610 762 914

113.4 113.4

wheel diameter in. mm

list 17 22 26 27 29 31

description 31⁄2˝ (89mm) diameter 5˝ (127mm) diameter, with swivel center

model # A200019 A213261

list 4 7

donut bumper channel frame for rigid stem casters

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

11


SHELVING / RETAIL DISPLAY Catalog Section 1

Plate Casters

Freight class is 65.0.

see spec sheet EG01.05B

(•) MTS (made to stock) / ( ) MTO (made to order)

Polymer - Polyurethane tread.

type

capacity lbs. kg

wheel diameter in. mm

wheel face in. mm

stem lock

250 250

5˝ 5˝

11⁄4˝ 11⁄4˝

90.7 90.7

127 127

32 32

weight lbs. kg model # 2.8 1.3 PCPS5-250 2.8 1.3 PCPL5-250

list 63 66

Resilient type

capacity wheel diameter lbs. kg in. mm

wheel face in. mm

weight lbs. kg

cu ft

swivel brake rigid swivel brake rigid swivel brake rigid

200 200 200 250 250 250 500 500 500

11⁄8˝ 11⁄8˝ 11⁄8˝ 11⁄4˝ 11⁄4˝ 11⁄4˝ 2˝ 2˝ 2˝

2.8 2.8 2.8 3.0 3.0 3.0 9.0 9.0 9.0

0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5

90.7 90.7 90.7 90.7 90.7 90.7 226.8 226.8 226.8

5˝ 5˝ 5˝ 5˝ 5˝ 5˝ 6˝ 6˝ 6˝

127 127 127 127 127 127 152 152 152

29 29 29 32 32 32 51 51 51

1.3 1.3 1.3 1.4 1.4 1.4 4.1 4.1 4.1

EAGLEbrite® zinc model # list CPS5-200 27 CPB5-200 32 CPR5-200 32 CPS5-250 45 CPB5-250 49 CPR5-250 49 CPS6-500 85 CPB6-500 98 CPR6-500 98

Polyurethane type

capacity wheel diameter lbs. kg in. mm

wheel face in. mm

swivel brake rigid swivel brake rigid swivel brake rigid swivel brake rigid

300 300 300 500 500 500 600 600 600 700 700 700

11⁄4˝ 11⁄4˝ 11⁄4˝ 2˝ 2˝ 2˝ 2˝ 2˝ 2˝ 2˝ 2˝ 2˝

136.1 136.1 136.1 226.8 226.8 226.8 272.1 272.1 272.1 317.5 317.5 317.5

5˝ 5˝ 5˝ 5˝ 5˝ 5˝ 6˝ 6˝ 6˝ 8˝ 8˝ 8˝

127 127 127 127 127 127 152 152 152 203 203 203

32 32 32 51 51 51 51 51 51 51 51 51

weight lbs. 3.0 3.0 3.0 8.0 8.0 8.0 9.0 9.0 9.0 10.5 10.5 10.5

kg

cu ft

1.4 1.4 1.4 3.6 3.6 3.6 4.1 4.1 4.1 4.8 4.8 4.8

0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 1.0 1.0 1.0

EAGLEbrite® zinc model # list CPS5P-300 45 CPB5P-300 48 CPR5P-300 48 CPS5P-500 80 CPB5P-500 92 CPR5P-500 92 CPS6P-600 67 CPB6P-600 83 CPR6P-600 83 CPS8P-700 98 CPB8P-700 109 CPR8P-700 109

with brake

Stainless Steel Cart Washable Casters - Polyurethane tread. type swivel/lock swivel brake

capacity wheel diameter lbs. kg in. mm

wheel face in. mm

weight lbs. kg

cu ft

300 300 300

11⁄4˝ 11⁄4˝ 11⁄4˝

3.0 3.0 3.0

0.5 0.5 0.5

136.1 136.1 136.1

5˝ 5˝ 5˝

127 127 127

32 32 32

1.4 1.4 1.4

stainless steel model # list CPCM5S-300 225 CPS5S-300 165 CPB5S-300 194

Go Green. Go ECO-Built ™ by Eagle. For restaurants and other institutions concerned about meeting their own green standards, buying Eco-Built is simply the right thing to do.

Look for the ECO-Built™ tag on the bar code

12

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

with brake


SHELVING / RETAIL DISPLAY Catalog Section 1

Solid Shelves see spec sheet

EG01.01 WEIGHT CAPACITY:

PACKAGING:

• Shelves up to 48˝ long: 600 lb. (272 kg). • Shelves 54˝ through 72˝ long: 400 lb. (181.4 kg) - evenly distributed static load. • 24˝ - 48˝ lengths: Four per box. • 54˝ - 72˝ lengths: Two per box. • Four pairs of split sleeves per shelf. All items can be shipped UPS. Freight class is 70.0.

All shelves feature aluminum castings.

(•) MTS (made to stock) / ( ) MTO (made to order)

Raised “V” Edge on all sides and double hem bending provides quality and strength!

14˝ width (356mm)

18˝ width (457mm)

21˝ width (533mm)

24˝ width (610mm)

length in. mm

weight lb. kg

cu ft

24˝ 30˝ 36˝ 42˝ 48˝ 54˝ 60˝ 72˝ 24˝ 30˝ 36˝ 42˝ 48˝ 54˝ 60˝ 72˝ 24˝ 30˝ 36˝ 42˝ 48˝ 54˝ 60˝ 72˝ 24˝ 30˝ 36˝ 42˝ 48˝ 54˝ 60˝ 72˝

10 12 14 15 17 20 22 26 11 14 16 18 20 22 24 28 13 15 18 21 23 25 28 30 15 17 19 23 24 27 31 33

0.5 0.5 0.5 0.7 0.7 0.9 0.9 1.1 0.7 0.7 0.7 0.9 0.9 1.2 1.2 1.3 0.7 0.7 0.8 1.1 1.1 1.3 1.3 1.4 0.8 0.8 0.8 1.2 1.2 1.5 1.5 1.6

610 762 914 1067 1219 1372 1524 1829 610 762 914 1067 1219 1372 1524 1829 610 762 914 1067 1219 1372 1524 1829 610 762 914 1067 1219 1372 1524 1829

4.5 5.5 6.4 6.8 7.7 9.1 10.0 11.8 5.0 6.4 7.3 8.2 9.1 10.0 10.9 12.7 5.9 6.8 8.2 9.5 10.5 11.4 12.7 13.6 6.8 7.7 8.6 10.5 10.9 12.3 14.1 15.0

side view of solid shelf, showing raised “V” edge

galvanized model # list SS1424G 142 SS1430G 145 SS1436G 153 SS1442G 156 SS1448G 158 SS1454G 171 SS1460G 173 SS1472G 180 SS1824G 142 SS1830G 148 SS1836G • 148 SS1842G 160 SS1848G • 163 SS1854G 176 SS1860G • 178 SS1872G 187 SS2124G 152 SS2130G 156 SS2136G 165 SS2142G 169 SS2148G 175 SS2154G 188 SS2160G 187 SS2172G 204 SS2424G • 154 SS2430G 159 SS2436G • 167 SS2442G 174 SS2448G • 179 SS2454G 194 SS2460G • 198 SS2472G • 209

VALU-MASTER® model # list SS1424V 156 SS1430V 160 SS1436V 165 SS1442V 173 SS1448V 175 SS1454V 191 SS1460V 196 SS1472V 205 SS1824V 160 SS1830V 163 SS1836V 169 SS1842V 177 SS1848V • 177 SS1854V 196 SS1860V 199 SS1872V 213 SS2124V 167 SS2130V 173 SS2136V 183 SS2142V 189 SS2148V 194 SS2154V 211 SS2160V 213 SS2172V 281 SS2424V 169 SS2430V 174 SS2436V • 185 SS2442V 194 SS2448V 198 SS2454V 215 SS2460V 222 SS2472V 240

Solid Shelf Joining Clamp see spec sheet EG01.03D model # A203078 Note:

list per pair 25

FEATURES:

Two required per shelf.

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

Valu-Gard® model # list SS1424VG 156 SS1430VG 160 SS1436VG 165 SS1442VG 173 SS1448VG 175 SS1454VG 191 SS1460VG 196 SS1472VG 205 SS1824VG 160 SS1830VG 163 SS1836VG 169 SS1842VG 177 SS1848VG 177 SS1854VG 196 SS1860VG 199 SS1872VG 213 SS2124VG 167 SS2130VG 173 SS2136VG 183 SS2142VG 189 SS2148VG 194 SS2154VG 211 SS2160VG 213 SS2172VG 281 SS2424VG 169 SS2430VG 174 SS2436VG 185 SS2442VG 194 SS2448VG 198 SS2454VG 215 SS2460VG 222 SS2472VG 240

stainless model # list SS1424S 248 SS1430S 252 SS1436S • 254 SS1442S 303 SS1448S • 308 SS1454S 319 SS1460S • 368 SS1472S 383 SS1824S • 280 SS1830S • 284 SS1836S • 288 SS1842S 349 SS1848S • 353 SS1854S 367 SS1860S • 414 SS1872S • 429 SS2124S 313 SS2130S 315 SS2136S • 318 SS2142S 400 SS2148S 403 SS2154S 418 SS2160S 468 SS2172S 478 SS2424S • 339 SS2430S 342 SS2436S • 344 SS2442S • 418 SS2448S • 420 SS2454S 434 SS2460S • 498 SS2472S • 507731

• Clamp and two additional posts create various shelving add-on configurations. • Joins shelves end-to-end, back-to-back, or at right angles. (•) MTS (made to stock) / ( ) MTO (made to order)

13


SHELVING / RETAIL DISPLAY Catalog Section 1 • 24˝ - 48˝ lengths: Four per box. • 54˝ - 60˝ lengths: Two per box. • Four pairs of aluminum split sleeves per shelf.

Seismic Shelving see spec sheet

EG01.27 PACKAGING:

Note:

Shelves and posts sold separately.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Designed to withstand earthquakes without labor-intensive sway braces.

seismic shelves

Patented QuadTruss® Design (Patent #5,390,803)

makes shelves up to 25% stronger and provides a retaining ledge for increased strength and product retention.

Shelves length weight in. mm lb. kg 24˝ 30˝ 18˝ 36˝ width 42˝ (457mm) 48˝ 54˝ 60˝ 24˝ 30˝ 21˝ 36˝ width 42˝ (533mm) 48˝ 54˝ 60˝ 24˝ 30˝ 24˝ 36˝ width 42˝ (610mm) 48˝ 54˝ 60˝

posts

Approved by the California Office of Statewide Health Planning and Development. Note:

OSHPD ongoing evaluation may affect EAGLE GROUP’s approve/pre-approve status. Consult factory.

610 762 914 1067 1219 1372 1524 610 762 914 1067 1219 1372 1524 610 762 914 1067 1219 1372 1524

Posts for Seismic Shelving see spec sheet

EG01.27

FEATURES:

7 3.2 9 4.1 10 4.5 12 5.4 13 5.8 14 6.4 18 8.2 8 3.6 10 4.5 12 5.4 13 5.8 15 6.8 17 7.7 19 8.6 9 4.1 12 5.4 14 6.4 16 7.3 17 7.7 18 8.2 22 10.0

cu ft 0.7 0.7 0.7 0.9 0.9 1.2 1.2 0.7 0.7 0.8 1.1 1.1 1.3 1.3 0.8 0.8 0.8 1.2 1.2 1.5 1.5

EAGLEbrite® model # list SA1824Z 81 SA1830Z 91 SA1836Z 97 SA1842Z 105 SA1848Z 116 SA1854Z 132 SA1860Z 133 SA2124Z 92 SA2130Z 100 SA2136Z 106 SA2142Z 118 SA2148Z 126 SA2154Z 143 SA2160Z 153 SA2424Z 100 SA2430Z 109 SA2436Z 112 SA2442Z 125 SA2448Z 133 SA2454Z 153 SA2460Z 163

chrome model # list SA1824C 91 SA1830C 101 SA1836C 105 SA1842C 117 SA1848C 126 SA1854C 143 SA1860C 146 SA2124C 100 SA2130C 112 SA2136C 121 SA2142C 133 SA2148C 139 SA2154C 160 SA2160C 165 SA2424C 109 SA2430C 117 SA2436C 125 SA2442C 139 SA2448C 152 SA2454C 169 SA2460C 179

• Four staked posts required; per unit. • Foot plates standard with each post. Freight class is 50.0.

Posts are numbered on vertical 1˝ (25mm) increments to help ensure fast and level assembly.

14

(•) MTS (made to stock) / ( ) MTO (made to order)

post height in. mm

weight lb. kg

54˝ 63˝ 72˝

3.0 3.5 4.0

1372 1600 1829

1.4 1.6 1.8

cu ft

EAGLEbrite® model # list 0.003 SAP54-Z 34 0.008 SAP63-Z 35 0.014 SAP72-Z 36

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

chrome model # list SAP54-C 36 SAP63-C 41 SAP72-C 42


SHELVING / RETAIL DISPLAY Catalog Section 1

Four-Shelf Starter Units see spec sheet

EG01.25 INCLUDES:

• Four shelves. • Four posts (same finish as shelves). • Shipped knocked-down. Note:

54˝ (1372mm) shelves available see page 7.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Patented QuadTruss® Design EAGLEgard® finish standard with MICROGARD® protection.

(Patent #5,390,803)

makes shelves up to 25% stronger and provides a retaining ledge for increased strength and product retention.

See page 6 for details.

Models with 63˝ (1600mm) Height length weight cu EAGLEbrite® in. mm lb. kg ft model # list 24˝ 610 42 19 1.8 S4-63-1824Z • 344 30˝ 762 47 21 2.2 S4-63-1830Z • 352 18˝ 36˝ 914 53 24 2.6 S4-63-1836Z • 364 width 42˝ 1067 57 26 3.0 S4-63-1842Z • 396 (457mm) 48˝ 1219 63 29 3.5 S4-63-1848Z • 408 60˝ 1524 82 37 4.2 S4-63-1860Z • 464 72˝ 1829 94 43 5.0 S4-63-1872Z • 524 24˝ 610 46 21 2.1 S4-63-2124Z • 368 30˝ 762 52 24 2.6 S4-63-2130Z • 380 21˝ 36˝ 914 59 27 3.0 S4-63-2136Z • 392 width 42˝ 1067 65 30 3.5 S4-63-2142Z • 420 (533mm) 48˝ 1219 71 32 4.0 S4-63-2148Z • 432 60˝ 1524 88 40 5.0 S4-63-2160Z • 508 72˝ 1829 98 45 7.8 S4-63-2172Z • 596 24˝ 610 50 23 2.4 S4-63-2424Z • 392 30˝ 762 57 26 2.9 S4-63-2430Z • 400 24˝ 36˝ 914 65 30 3.5 S4-63-2436Z • 412 width 42˝ 1067 72 33 3.6 S4-63-2442Z • 464 (610mm) 48˝ 1219 79 36 4.5 S4-63-2448Z • 472 60˝ 1524 98 45 5.6 S4-63-2460Z • 556 72˝ 1829 120 55 6.8 S4-63-2472Z • 628

chrome model # S4-63-1824C • S4-63-1830C • S4-63-1836C • S4-63-1842C • S4-63-1848C • S4-63-1860C • S4-63-1872C • S4-63-2124C • S4-63-2130C • S4-63-2136C • S4-63-2142C • S4-63-2148C • S4-63-2160C • S4-63-2172C • S4-63-2424C • S4-63-2430C • S4-63-2436C • S4-63-2442C • S4-63-2448C • S4-63-2460C • S4-63-2472C •

list 348 360 368 412 420 480 552 384 408 416 460 468 528 624 412 420 432 492 504 576 668

VALU-MASTER® model # list S4-63-1824V • 364 S4-63-1830V • 392 S4-63-1836V • 412 S4-63-1842V • 444 S4-63-1848V • 476 S4-63-1860V • 532 S4-63-1872V • 620 S4-63-2124V • 404 S4-63-2130V • 420 S4-63-2136V • 460 S4-63-2142V • 488 S4-63-2148V • 508 S4-63-2160V • 592 S4-63-2172V • 676 S4-63-2424V • 424 S4-63-2430V • 460 S4-63-2436V • 480 S4-63-2442V • 520 S4-63-2448V • 564 S4-63-2460V • 652 S4-63-2472V • 754

Valu-Gard® model # S4-63-1824VG • S4-63-1830VG • S4-63-1836VG • S4-63-1842VG • S4-63-1848VG • S4-63-1860VG • S4-63-1872VG • S4-63-2124VG • S4-63-2130VG • S4-63-2136VG • S4-63-2142VG • S4-63-2148VG • S4-63-2160VG • S4-63-2172VG • S4-63-2424VG • S4-63-2430VG • S4-63-2436VG • S4-63-2442VG • S4-63-2448VG • S4-63-2460VG • S4-63-2472VG •

VALU-MASTER® model # list S4-74-1824V • 372 S4-74-1830V • 400 S4-74-1836V • 420 S4-74-1842V • 452 S4-74-1848V • 484 S4-74-1860V • 540 S4-74-1872V • 628 S4-74-2124V • 412 S4-74-2130V • 428 S4-74-2136V • 468 S4-74-2142V • 496 S4-74-2148V • 516 S4-74-2160V • 600 S4-74-2172V • 684 S4-74-2424V • 432 S4-74-2430V • 468 S4-74-2436V • 488 S4-74-2442V • 528 S4-74-2448V • 572 S4-74-2460V • 660 S4-74-2472V • 760

Valu-Gard® model # S4-74-1824VG • S4-74-1830VG • S4-74-1836VG • S4-74-1842VG • S4-74-1848VG • S4-74-1860VG • S4-74-1872VG • S4-74-2124VG • S4-74-2130VG • S4-74-2136VG • S4-74-2142VG • S4-74-2148VG • S4-74-2160VG • S4-74-2172VG • S4-74-2424VG • S4-74-2430VG • S4-74-2436VG • S4-74-2442VG • S4-74-2448VG • S4-74-2460VG • S4-74-2472VG •

list 364 392 412 444 476 532 620 404 420 460 488 508 592 676 424 460 480 520 564 652 754

EAGLEgard® model # list S4-63-1824E • 424 S4-63-1830E • 432 S4-63-1836E • 444 S4-63-1842E • 504 S4-63-1848E • 516 S4-63-1860E • 588 S4-63-1872E • 660 S4-63-2124E • 468 S4-63-2130E • 480 S4-63-2136E • 488 S4-63-2142E • 540 S4-63-2148E • 548 S4-63-2160E • 636 S4-63-2172E • 752 S4-63-2424E • 500 S4-63-2430E • 508 S4-63-2436E • 520 S4-63-2442E • 596 S4-63-2448E • 612 S4-63-2460E • 700 S4-63-2472E • 804

stainless model # list S4-63-1824S • 1236 S4-63-1830S • 1244 S4-63-1836S • 1260 S4-63-1842S • 1440 S4-63-1848S • 1452 S4-63-1860S • 1780 S4-63-1872S • 2064

EAGLEgard® model # list S4-74-1824E • 436 S4-74-1830E • 444 S4-74-1836E • 456 S4-74-1842E • 516 S4-74-1848E • 528 S4-74-1860E • 600 S4-74-1872E • 672 S4-74-2124E • 480 S4-74-2130E • 492 S4-74-2136E • 500 S4-74-2142E • 552 S4-74-2148E • 560 S4-74-2160E • 648 S4-74-2172E • 764 S4-74-2424E • 512 S4-74-2430E • 520 S4-74-2436E • 532 S4-74-2442E • 608 S4-74-2448E • 624 S4-74-2460E • 712 S4-74-2472E • 816

stainless model # list S4-74-1824S • 1272 S4-74-1830S • 1280 S4-74-1836S • 1296 S4-74-1842S • 1476 S4-74-1848S • 1488 S4-74-1860S • 1816 S4-74-1872S • 2100

S4-63-2124S S4-63-2130S S4-63-2136S • S4-63-2142S S4-63-2148S • S4-63-2160S • S4-63-2172S S4-63-2424S • S4-63-2430S • S4-63-2436S • S4-63-2442S • S4-63-2448S • S4-63-2460S • S4-63-2472S •

1384 1396 1404 1584 1592 2024 2352 1480 1488 1504 1748 1756 2100 2560

Models with 74˝ (1880mm) Height length weight cu EAGLEbrite® in. mm lb. kg ft model # list 24˝ 610 51 23 1.9 S4-74-1824Z • 356 30˝ 762 58 26 2.3 S4-74-1830Z • 364 18˝ 36˝ 914 65 30 2.7 S4-74-1836Z • 376 width 42˝ 1067 70 32 3.1 S4-74-1842Z • 408 (457mm) 48˝ 1219 78 36 3.6 S4-74-1848Z • 420 60˝ 1524 102 46 4.3 S4-74-1860Z • 476 72˝ 1829 117 53 5.1 S4-74-1872Z • 536 24˝ 610 57 26 2.2 S4-74-2124Z • 380 30˝ 762 64 29 2.7 S4-74-2130Z • 392 21˝ 36˝ 914 73 33 3.1 S4-74-2136Z • 404 width 42˝ 1067 81 37 3.6 S4-74-2142Z • 432 (533mm) 48˝ 1219 88 40 4.1 S4-74-2148Z • 444 60˝ 1524 109 50 5.1 S4-74-2160Z • 520 72˝ 1829 122 55 7.7 S4-74-2172Z • 608 24˝ 610 62 28 2.5 S4-74-2424Z • 404 30˝ 762 71 32 3.0 S4-74-2430Z • 412 24˝ 36˝ 914 81 37 3.6 S4-74-2436Z • 424 width 42˝ 1067 89 40 3.7 S4-74-2442Z • 476 (610mm) 48˝ 1219 98 45 4.6 S4-74-2448Z • 484 60˝ 1524 122 55 5.7 S4-74-2460Z • 568 72˝ 1829 149 68 6.9 S4-74-2472Z • 640

chrome model # S4-74-1824C • S4-74-1830C • S4-74-1836C • S4-74-1842C • S4-74-1848C • S4-74-1860C • S4-74-1872C • S4-74-2124C • S4-74-2130C • S4-74-2136C • S4-74-2142C • S4-74-2148C • S4-74-2160C • S4-74-2172C • S4-74-2424C • S4-74-2430C • S4-74-2436C • S4-74-2442C • S4-74-2448C • S4-74-2460C • S4-74-2472C •

list 360 372 380 424 432 492 564 396 420 428 472 480 540 636 424 432 444 504 516 588 680

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

list 372 400 420 452 484 540 628 412 428 468 496 516 600 684 432 468 488 528 572 660 760

S4-74-2124S S4-74-2130S S4-74-2136S • S4-74-2142S S4-74-2148S • S4-74-2160S • S4-74-2172S S4-74-2424S • S4-74-2430S • S4-74-2436S • S4-74-2442S • S4-74-2448S • S4-74-2460S • S4-74-2472S •

1420 1432 1440 1620 1628 2060 2388 1516 1524 1540 1784 1792 2136 2596

15


SHELVING / RETAIL DISPLAY Catalog Section 1

Four-Shelf Add-on Units see spec sheet

EG01.25 INCLUDES:

• • • •

Four shelves. Two posts (same finish as shelves). Two “S” hooks per shelf. Shipped knocked-down.

Note:

54˝ (1372mm) shelves available see page 7.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Patented QuadTruss® Design

EAGLEgard® finish standard with MICROGARD® protection.

(Patent #5,390,803)

See page 6 for details.

makes shelves up to 25% stronger and provides a retaining ledge for increased strength and product retention.

Models with 63˝ (1600mm) Height length weight cu EAGLEbrite® in. mm lb. kg ft model # list 24˝ 610 35 16 1.8 A4-63-1824Z • 320 30˝ 762 40 18 2.2 A4-63-1830Z • 328 18˝ 36˝ 914 46 21 2.6 A4-63-1836Z • 340 width 42˝ 1067 50 23 3.0 A4-63-1842Z • 372 (457mm) 48˝ 1219 56 25 3.5 A4-63-1848Z • 384 60˝ 1524 75 34 4.2 A4-63-1860Z • 440 72˝ 1829 87 40 5.0 A4-63-1872Z • 500 24˝ 610 39 18 2.1 A4-63-2124Z • 344 30˝ 762 45 21 2.6 A4-63-2130Z • 356 21˝ 36˝ 914 52 24 3.0 A4-63-2136Z • 368 width 42˝ 1067 58 26 3.5 A4-63-2142Z • 396 (533mm) 48˝ 1219 64 29 4.0 A4-63-2148Z • 408 60˝ 1524 81 37 5.0 A4-63-2160Z • 484 72˝ 1829 92 42 7.8 A4-63-2172Z • 572 24˝ 610 43 20 2.4 A4-63-2424Z • 368 30˝ 762 50 23 2.9 A4-63-2430Z • 376 24˝ 36˝ 914 58 26 3.5 A4-63-2436Z • 388 width 42˝ 1067 65 30 3.6 A4-63-2442Z • 440 (610mm) 48˝ 1219 72 33 4.5 A4-63-2448Z • 448 60˝ 1524 91 41 5.6 A4-63-2460Z • 532 72˝ 1829 113 51 6.8 A4-63-2472Z • 604

chrome model # A4-63-1824C • A4-63-1830C • A4-63-1836C • A4-63-1842C • A4-63-1848C • A4-63-1860C • A4-63-1872C • A4-63-2124C • A4-63-2130C • A4-63-2136C • A4-63-2142C • A4-63-2148C • A4-63-2160C • A4-63-2172C • A4-63-2424C • A4-63-2430C • A4-63-2436C • A4-63-2442C • A4-63-2448C • A4-63-2460C • A4-63-2472C •

VALU-MASTER® list model # list 324 A4-63-1824V • 336 336 A4-63-1830V • 364 344 A4-63-1836V • 384 388 A4-63-1842V • 416 396 A4-63-1848V • 448 456 A4-63-1860V • 504 528 A4-63-1872V • 592 360 A4-63-2124V • 376 384 A4-63-2130V • 392 392 A4-63-2136V • 432 436 A4-63-2142V • 460 444 A4-63-2148V • 480 504 A4-63-2160V • 564 600 A4-63-2172V • 648 388 A4-63-2424V • 396 396 A4-63-2430V • 432 408 A4-63-2436V • 452 468 A4-63-2442V • 492 480 A4-63-2448V • 536 552 A4-63-2460V • 624 644 A4-63-2472V • 724

Valu-Gard® model # A4-63-1824VG • A4-63-1830VG • A4-63-1836VG • A4-63-1842VG • A4-63-1848VG • A4-63-1860VG • A4-63-1872VG • A4-63-2124VG • A4-63-2130VG • A4-63-2136VG • A4-63-2142VG • A4-63-2148VG • A4-63-2160VG • A4-63-2172VG • A4-63-2424VG • A4-63-2430VG • A4-63-2436VG • A4-63-2442VG • A4-63-2448VG • A4-63-2460VG • A4-63-2472VG •

EAGLEgard® list model # list 336 A4-63-1824E • 392 364 A4-63-1830E • 400 384 A4-63-1836E • 412 416 A4-63-1842E • 472 448 A4-63-1848E • 484 504 A4-63-1860E • 556 592 A4-63-1872E • 628 376 A4-63-2124E • 436 392 A4-63-2130E • 448 432 A4-63-2136E • 456 460 A4-63-2142E • 508 480 A4-63-2148E • 516 564 A4-63-2160E • 604 648 A4-63-2172E • 720 396 A4-63-2424E • 468 432 A4-63-2430E • 476 452 A4-63-2436E • 488 492 A4-63-2442E • 564 536 A4-63-2448E • 580 624 A4-63-2460E • 668 724 A4-63-2472E • 772

stainless model # list A4-63-1824S • 1132 A4-63-1830S • 1140 A4-63-1836S • 1156 A4-63-1842S • 1336 A4-63-1848S • 1348 A4-63-1860S • 1676 A4-63-1872S • 1960

chrome model # A4-74-1824C • A4-74-1830C • A4-74-1836C • A4-74-1842C • A4-74-1848C • A4-74-1860C • A4-74-1872C • A4-74-2124C • A4-74-2130C • A4-74-2136C • A4-74-2142C • A4-74-2148C • A4-74-2160C • A4-74-2172C • A4-74-2424C • A4-74-2430C • A4-74-2436C • A4-74-2442C • A4-74-2448C • A4-74-2460C • A4-74-2472C •

VALU-MASTER® list model # list 330 A4-74-1824V • 340 342 A4-74-1830V • 368 350 A4-74-1836V • 388 394 A4-74-1842V • 420 402 A4-74-1848V • 452 462 A4-74-1860V • 508 534 A4-74-1872V • 596 366 A4-74-2124V • 380 390 A4-74-2130V • 396 398 A4-74-2136V • 436 442 A4-74-2142V • 464 450 A4-74-2148V • 484 510 A4-74-2160V • 568 606 A4-74-2172V • 652 394 A4-74-2424V • 400 402 A4-74-2430V • 436 414 A4-74-2436V • 456 474 A4-74-2442V • 496 486 A4-74-2448V • 540 558 A4-74-2460V • 628 650 A4-74-2472V • 728

Valu-Gard® model # A4-74-1824VG • A4-74-1830VG • A4-74-1836VG • A4-74-1842VG • A4-74-1848VG • A4-74-1860VG • A4-74-1872VG • A4-74-2124VG • A4-74-2130VG • A4-74-2136VG • A4-74-2142VG • A4-74-2148VG • A4-74-2160VG • A4-74-2172VG • A4-74-2424VG • A4-74-2430VG • A4-74-2436VG • A4-74-2442VG • A4-74-2448VG • A4-74-2460VG • A4-74-2472VG •

EAGLEgard® list model # list 340 A4-74-1824E • 398 368 A4-74-1830E • 406 388 A4-74-1836E • 418 420 A4-74-1842E • 478 452 A4-74-1848E • 490 508 A4-74-1860E • 562 596 A4-74-1872E • 634 380 A4-74-2124E • 442 396 A4-74-2130E • 454 436 A4-74-2136E • 462 464 A4-74-2142E • 514 484 A4-74-2148E • 522 568 A4-74-2160E • 610 652 A4-74-2172E • 726 400 A4-74-2424E • 474 436 A4-74-2430E • 482 456 A4-74-2436E • 494 496 A4-74-2442E • 570 540 A4-74-2448E • 586 628 A4-74-2460E • 674 728 A4-74-2472E • 778

stainless model # list A4-74-1824S • 1150 A4-74-1830S • 1158 A4-74-1836S • 1174 A4-74-1842S • 1354 A4-74-1848S • 1366 A4-74-1860S • 1694 A4-74-1872S • 1978

A4-63-2124S A4-63-2130S A4-63-2136S • A4-63-2142S A4-63-2148S • A4-63-2160S • A4-63-2172S A4-63-2424S • A4-63-2430S • A4-63-2436S • A4-63-2442S • A4-63-2448S • A4-63-2460S • A4-63-2472S •

1280 1292 1300 1480 1488 1920 2248 1376 1384 1400 1644 1652 1996 2456

Models with 74˝ (1880mm) Height length weight cu EAGLEbrite® in. mm lb. kg ft model # list 24˝ 610 43 20 1.9 A4-74-1824Z • 326 30˝ 762 50 23 2.3 A4-74-1830Z • 334 18˝ 36˝ 914 57 26 2.7 A4-74-1836Z • 346 width 42˝ 1067 62 28 3.1 A4-74-1842Z • 378 (457mm) 48˝ 1219 70 32 3.6 A4-74-1848Z • 390 60˝ 1524 93 42 4.3 A4-74-1860Z • 446 72˝ 1829 108 49 5.1 A4-74-1872Z • 506 24˝ 610 48 22 2.2 A4-74-2124Z • 350 30˝ 762 56 26 2.7 A4-74-2130Z • 362 21˝ 36˝ 914 65 30 3.1 A4-74-2136Z • 374 width 42˝ 1067 73 33 3.6 A4-74-2142Z • 402 (533mm) 48˝ 1219 80 36 4.1 A4-74-2148Z • 414 60˝ 1524 101 46 5.1 A4-74-2160Z • 490 72˝ 1829 113 51 7.7 A4-74-2172Z • 578 24˝ 610 53 24 2.5 A4-74-2424Z • 374 30˝ 762 62 28 3.0 A4-74-2430Z • 382 24˝ 36˝ 914 73 33 3.6 A4-74-2436Z • 394 width 42˝ 1067 81 37 3.7 A4-74-2442Z • 446 (610mm) 48˝ 1219 90 41 4.6 A4-74-2448Z • 454 60˝ 1524 113 51 5.7 A4-74-2460Z • 538 72˝ 1829 141 64 6.9 A4-74-2472Z • 610

16

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

A4-74-2124S A4-74-2130S A4-74-2136S • A4-74-2142S A4-74-2148S • A4-74-2160S • A4-74-2172S A4-74-2424S • A4-74-2430S • A4-74-2436S • A4-74-2442S • A4-74-2448S • A4-74-2460S • A4-74-2472S •

1298 1310 1318 1498 1506 1938 2266 1394 1402 1418 1662 1670 2014 2474


SHELVING / RETAIL DISPLAY Catalog Section 1

Five-Shelf Starter Units see spec sheet

EG01.25 INCLUDES:

• Five wire shelves. • Four posts (same finish as shelves). • Shipped knocked-down. Note:

54˝ (1372mm) shelves available see page 7.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Patented QuadTruss® Design EAGLEgard® finish standard with MICROGARD® protection.

(Patent #5,390,803)

makes shelves up to 25% stronger and provides a retaining ledge for increased strength and product retention.

See page 6 for details.

Models with 74˝ (1880mm) Height length weight cu EAGLEbrite® in. mm lb. kg ft model # list 24˝ 610 51 23 1.9 S5-74-1824Z • 418 30˝ 762 58 26 2.3 S5-74-1830Z • 428 18˝ 36˝ 914 65 30 2.7 S5-74-1836Z • 443 width 42˝ 1067 70 32 3.1 S5-74-1842Z • 483 (457mm) 48˝ 1219 78 36 3.6 S5-74-1848Z • 498 60˝ 1524 102 46 4.3 S5-74-1860Z • 568 72˝ 1829 117 53 5.1 S5-74-1872Z • 643 24˝ 610 57 26 2.2 S5-74-2124Z • 448 30˝ 762 64 29 2.7 S5-74-2130Z • 463 21˝ 36˝ 914 73 33 3.1 S5-74-2136Z • 478 width 42˝ 1067 81 37 3.6 S5-74-2142Z • 513 (533mm) 48˝ 1219 88 40 4.1 S5-74-2148Z • 528 60˝ 1524 109 50 5.1 S5-74-2160Z • 623 72˝ 1829 122 55 7.7 S5-74-2172Z • 733 24˝ 610 62 28 2.5 S5-74-2424Z • 478 30˝ 762 71 32 3.0 S5-74-2430Z • 488 24˝ 36˝ 914 81 37 3.6 S5-74-2436Z • 503 width 42˝ 1067 89 40 3.7 S5-74-2442Z • 568 (610mm) 48˝ 1219 98 45 4.6 S5-74-2448Z • 578 60˝ 1524 122 55 5.7 S5-74-2460Z • 683 72˝ 1829 149 68 6.9 S5-74-2472Z • 773

chrome model # S5-74-1824C • S5-74-1830C • S5-74-1836C • S5-74-1842C • S5-74-1848C • S5-74-1860C • S5-74-1872C • S5-74-2124C • S5-74-2130C • S5-74-2136C • S5-74-2142C • S5-74-2148C • S5-74-2160C • S5-74-2172C • S5-74-2424C • S5-74-2430C • S5-74-2436C • S5-74-2442C • S5-74-2448C • S5-74-2460C • S5-74-2472C •

VALU-MASTER® list model # list 423 S5-74-1824V • 437 438 S5-74-1830V • 472 448 S5-74-1836V • 497 503 S5-74-1842V • 537 513 S5-74-1848V • 577 588 S5-74-1860V • 647 678 S5-74-1872V • 757 468 S5-74-2124V • 487 498 S5-74-2130V • 507 508 S5-74-2136V • 557 563 S5-74-2142V • 592 573 S5-74-2148V • 617 648 S5-74-2160V • 722 768 S5-74-2172V • 827 503 S5-74-2424V • 512 513 S5-74-2430V • 557 528 S5-74-2436V • 582 603 S5-74-2442V • 632 618 S5-74-2448V • 687 708 S5-74-2460V • 797 823 S5-74-2472V • 922

Valu-Gard® model # S5-74-1824VG • S5-74-1830VG • S5-74-1836VG • S5-74-1842VG • S5-74-1848VG • S5-74-1860VG • S5-74-1872VG • S5-74-2124VG • S5-74-2130VG • S5-74-2136VG • S5-74-2142VG • S5-74-2148VG • S5-74-2160VG • S5-74-2172VG • S5-74-2424VG • S5-74-2430VG • S5-74-2436VG • S5-74-2442VG • S5-74-2448VG • S5-74-2460VG • S5-74-2472VG •

EAGLEgard® list model # list 437 S5-74-1824E • 514 472 S5-74-1830E • 524 497 S5-74-1836E • 539 537 S5-74-1842E • 614 577 S5-74-1848E • 629 647 S5-74-1860E • 719 757 S5-74-1872E • 809 487 S5-74-2124E • 569 507 S5-74-2130E • 584 557 S5-74-2136E • 594 592 S5-74-2142E • 659 617 S5-74-2148E • 669 722 S5-74-2160E • 779 827 S5-74-2172E • 924 512 S5-74-2424E • 609 557 S5-74-2430E • 619 582 S5-74-2436E • 634 632 S5-74-2442E • 729 687 S5-74-2448E • 749 797 S5-74-2460E • 859 922 S5-74-2472E • 989

chrome model # S5-86-1824C • S5-86-1830C • S5-86-1836C • S5-86-1842C • S5-86-1848C • S5-86-1860C • S5-86-1872C • S5-86-2124C • S5-86-2130C • S5-86-2136C • S5-86-2142C • S5-86-2148C • S5-86-2160C • S5-86-2172C • S5-86-2424C • S5-86-2430C • S5-86-2436C • S5-86-2442C • S5-86-2448C • S5-86-2460C • S5-86-2472C •

VALU-MASTER® list model # list 447 S5-86-1824V • 465 462 S5-86-1830V • 500 472 S5-86-1836V • 525 527 S5-86-1842V • 565 537 S5-86-1848V • 605 612 S5-86-1860V • 675 702 S5-86-1872V • 785 492 S5-86-2124V • 515 522 S5-86-2130V • 535 532 S5-86-2136V • 585 587 S5-86-2142V • 620 597 S5-86-2148V • 645 672 S5-86-2160V • 750 792 S5-86-2172V • 855 527 S5-86-2424V • 540 537 S5-86-2430V • 585 552 S5-86-2436V • 610 627 S5-86-2442V • 660 642 S5-86-2448V • 715 732 S5-86-2460V • 825 847 S5-86-2472V • 950

Valu-Gard® model # S5-86-1824VG • S5-86-1830VG • S5-86-1836VG • S5-86-1842VG • S5-86-1848VG • S5-86-1860VG • S5-86-1872VG • S5-86-2124VG • S5-86-2130VG • S5-86-2136VG • S5-86-2142VG • S5-86-2148VG • S5-86-2160VG • S5-86-2172VG • S5-86-2424VG • S5-86-2430VG • S5-86-2436VG • S5-86-2442VG • S5-86-2448VG • S5-86-2460VG • S5-86-2472VG •

EAGLEgard® list model # list 465 S5-86-1824E • 534 500 S5-86-1830E • 544 525 S5-86-1836E • 559 565 S5-86-1842E • 634 605 S5-86-1848E • 649 675 S5-86-1860E • 739 785 S5-86-1872E • 829 515 S5-86-2124E • 589 535 S5-86-2130E • 604 585 S5-86-2136E • 614 620 S5-86-2142E • 679 645 S5-86-2148E • 689 750 S5-86-2160E • 799 855 S5-86-2172E • 944 540 S5-86-2424E • 629 585 S5-86-2430E • 639 610 S5-86-2436E • 654 660 S5-86-2442E • 749 715 S5-86-2448E • 769 825 S5-86-2460E • 879 950 S5-86-2472E • 1009

stainless model # list S5-74-1824S S5-74-1830S S5-74-1836S S5-74-1842S S5-74-1848S S5-74-1860S S5-74-1872S S5-74-2124S S5-74-2130S S5-74-2136S S5-74-2142S S5-74-2148S S5-74-2160S S5-74-2172S S5-74-2424S S5-74-2430S S5-74-2436S S5-74-2442S S5-74-2448S S5-74-2460S S5-74-2472S

1517 1527 1547 1772 1787 2197 2552 1702 1717 1727 1952 1962 2502 2912 1822 1832 1852 2157 2167 2597 3172

Models with 86˝ (2184mm) Height length weight cu EAGLEbrite® in. mm lb. kg ft model # list 24˝ 610 55 25 3.9 S5-86-1824Z • 442 30˝ 762 60 27 3.9 S5-86-1830Z • 452 18˝ 36˝ 914 65 30 3.9 S5-86-1836Z • 467 width 42˝ 1067 75 34 4.9 S5-86-1842Z • 507 (457mm) 48˝ 1219 80 36 4.9 S5-86-1848Z • 522 60˝ 1524 105 48 6.4 S5-86-1860Z • 592 72˝ 1829 120 54 7.4 S5-86-1872Z • 667 24˝ 610 60 27 3.9 S5-86-2124Z • 472 30˝ 762 65 30 3.9 S5-86-2130Z • 487 21˝ 36˝ 914 75 34 4.4 S5-86-2136Z • 502 width 42˝ 1067 80 36 5.9 S5-86-2142Z • 537 (533mm) 48˝ 1219 90 41 5.9 S5-86-2148Z • 552 60˝ 1524 110 50 6.9 S5-86-2160Z • 647 72˝ 1829 140 64 8.4 S5-86-2172Z • 757 24˝ 610 65 30 4.4 S5-86-2424Z • 502 30˝ 762 75 34 4.4 S5-86-2430Z • 512 24˝ 36˝ 914 85 39 4.4 S5-86-2436Z • 527 width 42˝ 1067 95 43 6.4 S5-86-2442Z • 592 (610mm) 48˝ 1219 100 45 6.4 S5-86-2448Z • 602 60˝ 1524 125 57 7.9 S5-86-2460Z • 707 72˝ 1829 150 68 9.4 S5-86-2472Z • 797

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

stainless model # list S5-86-1824S S5-86-1830S S5-86-1836S S5-86-1842S S5-86-1848S S5-86-1860S S5-86-1872S S5-86-2124S S5-86-2130S S5-86-2136S S5-86-2142S S5-86-2148S S5-86-2160S S5-86-2172S S5-86-2424S S5-86-2430S S5-86-2436S S5-86-2442S S5-86-2448S S5-86-2460S S5-86-2472S

1573 1583 1603 1828 1843 2253 2608 1758 1773 1783 2008 2018 2558 2968 1878 1888 1908 2213 2223 2653 3228

17


SHELVING / RETAIL DISPLAY Catalog Section 1

Five-Shelf Add-On Units see spec sheet

EG01.25 INCLUDES:

• • • •

Five wire shelves. Two posts (same finish as shelves). Two “S” hooks per shelf. Shipped knocked-down.

Note:

54˝ (1372mm) shelves available see page 7.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Patented QuadTruss® Design EAGLEgard® finish standard with MICROGARD® protection.

(Patent #5,390,803)

See page 6 for details.

makes shelves up to 25% stronger and provides a retaining ledge for increased strength and product retention.

Models with 74˝ (1880mm) Height length weight cu EAGLEbrite® in. mm lb. kg ft model # list 24˝ 610 43 20 1.9 A5-74-1824Z • 396 30˝ 762 50 23 2.3 A5-74-1830Z • 406 18˝ 36˝ 914 57 26 2.7 A5-74-1836Z • 421 width 42˝ 1067 62 28 3.1 A5-74-1842Z • 461 (457mm) 48˝ 1219 80 36 3.6 A5-74-1848Z • 476 60˝ 1524 93 42 4.3 A5-74-1860Z • 546 72˝ 1829 108 49 5.1 A5-74-1872Z • 621 24˝ 610 48 22 2.2 A5-74-2124Z • 426 30˝ 762 56 26 2.7 A5-74-2130Z • 441 21˝ 36˝ 914 65 30 3.1 A5-74-2136Z • 456 width 42˝ 1067 73 33 3.6 A5-74-2142Z • 491 (533mm) 48˝ 1219 80 36 4.1 A5-74-2148Z • 506 60˝ 1524 101 46 5.1 A5-74-2160Z • 601 72˝ 1829 113 51 7.7 A5-74-2172Z • 711 24˝ 610 53 24 2.5 A5-74-2424Z • 456 30˝ 762 62 28 3.0 A5-74-2430Z • 466 24˝ 36˝ 914 73 33 3.6 A5-74-2436Z • 481 width 42˝ 1067 81 37 3.7 A5-74-2442Z • 546 (610mm) 48˝ 1219 90 41 4.6 A5-74-2448Z • 556 60˝ 1524 113 51 5.7 A5-74-2460Z • 661 72˝ 1829 141 64 6.9 A5-74-2472Z • 751

chrome model # A5-74-1824C • A5-74-1830C • A5-74-1836C • A5-74-1842C • A5-74-1848C • A5-74-1860C • A5-74-1872C • A5-74-2124C • A5-74-2130C • A5-74-2136C • A5-74-2142C • A5-74-2148C • A5-74-2160C • A5-74-2172C • A5-74-2424C • A5-74-2430C • A5-74-2436C • A5-74-2442C • A5-74-2448C • A5-74-2460C • A5-74-2472C •

VALU-MASTER® list model # list 401 A5-74-1824V • 413 416 A5-74-1830V • 448 426 A5-74-1836V • 473 481 A5-74-1842V • 513 491 A5-74-1848V • 553 566 A5-74-1860V • 623 656 A5-74-1872V • 733 446 A5-74-2124V • 463 476 A5-74-2130V • 483 486 A5-74-2136V • 533 541 A5-74-2142V • 568 551 A5-74-2148V • 593 626 A5-74-2160V • 698 746 A5-74-2172V • 803 481 A5-74-2424V • 488 491 A5-74-2430V • 533 506 A5-74-2436V • 558 581 A5-74-2442V • 608 596 A5-74-2448V • 663 686 A5-74-2460V • 773 801 A5-74-2472V • 898

Valu-Gard® model # A5-74-1824VG • A5-74-1830VG • A5-74-1836VG • A5-74-1842VG • A5-74-1848VG • A5-74-1860VG • A5-74-1872VG • A5-74-2124VG • A5-74-2130VG • A5-74-2136VG • A5-74-2142VG • A5-74-2148VG • A5-74-2160VG • A5-74-2172VG • A5-74-2424VG • A5-74-2430VG • A5-74-2436VG • A5-74-2442VG • A5-74-2448VG • A5-74-2460VG • A5-74-2472VG •

EAGLEgard® list model # list 413 A5-74-1824E • 484 448 A5-74-1830E • 494 473 A5-74-1836E • 509 513 A5-74-1842E • 584 553 A5-74-1848E • 599 623 A5-74-1860E • 689 733 A5-74-1872E • 779 463 A5-74-2124E • 539 483 A5-74-2130E • 554 533 A5-74-2136E • 564 568 A5-74-2142E • 629 593 A5-74-2148E • 639 698 A5-74-2160E • 749 803 A5-74-2172E • 894 488 A5-74-2424E • 579 533 A5-74-2430E • 589 558 A5-74-2436E • 604 608 A5-74-2442E • 699 663 A5-74-2448E • 719 773 A5-74-2460E • 829 898 A5-74-2472E • 959

chrome model # A5-86-1824C • A5-86-1830C • A5-86-1836C • A5-86-1842C • A5-86-1848C • A5-86-1860C • A5-86-1872C • A5-86-2124C • A5-86-2130C • A5-86-2136C • A5-86-2142C • A5-86-2148C • A5-86-2160C • A5-86-2172C • A5-86-2424C • A5-86-2430C • A5-86-2436C • A5-86-2442C • A5-86-2448C • A5-86-2460C • A5-86-2472C •

VALU-MASTER® list model # list 413 A5-86-1824V • 427 428 A5-86-1830V • 462 438 A5-86-1836V • 487 493 A5-86-1842V • 527 503 A5-86-1848V • 567 578 A5-86-1860V • 637 668 A5-86-1872V • 747 458 A5-86-2124V • 477 488 A5-86-2130V • 497 498 A5-86-2136V • 547 553 A5-86-2142V • 582 563 A5-86-2148V • 607 638 A5-86-2160V • 712 758 A5-86-2172V • 817 493 A5-86-2424V • 502 503 A5-86-2430V • 547 518 A5-86-2436V • 572 593 A5-86-2442V • 622 577 A5-86-2448V • 641 698 A5-86-2460V • 787 813 A5-86-2472V • 912

Valu-Gard® model # A5-86-1824VG • A5-86-1830VG • A5-86-1836VG • A5-86-1842VG • A5-86-1848VG • A5-86-1860VG • A5-86-1872VG • A5-86-2124VG • A5-86-2130VG • A5-86-2136VG • A5-86-2142VG • A5-86-2148VG • A5-86-2160VG • A5-86-2172VG • A5-86-2424VG • A5-86-2430VG • A5-86-2436VG • A5-86-2442VG • A5-86-2448VG • A5-86-2460VG • A5-86-2472VG •

EAGLEgard® list model # list 427 A5-86-1824E • 494 462 A5-86-1830E • 504 487 A5-86-1836E • 519 527 A5-86-1842E • 594 567 A5-86-1848E • 609 637 A5-86-1860E • 699 747 A5-86-1872E • 789 477 A5-86-2124E • 549 497 A5-86-2130E • 564 547 A5-86-2136E • 574 582 A5-86-2142E • 639 607 A5-86-2148E • 649 712 A5-86-2160E • 759 817 A5-86-2172E • 904 502 A5-86-2424E • 589 547 A5-86-2430E • 599 572 A5-86-2436E • 614 622 A5-86-2442E • 709 641 A5-86-2448E • 693 787 A5-86-2460E • 839 912 A5-86-2472E • 969

stainless model # list A5-74-1824S A5-74-1830S A5-74-1836S A5-74-1842S A5-74-1848S A5-74-1860S A5-74-1872S A5-74-2124S A5-74-2130S A5-74-2136S A5-74-2142S A5-74-2148S A5-74-2160S A5-74-2172S A5-74-2424S A5-74-2430S A5-74-2436S A5-74-2442S A5-74-2448S A5-74-2460S A5-74-2472S

1403 1413 1433 1658 1673 2083 2438 1588 1603 1613 1838 1848 2388 2798 1708 1718 1738 2043 2053 2483 3058

Models with 86˝ (2184mm) Height length weight cu EAGLEbrite® in. mm lb. kg ft model # list 24˝ 610 45 20 3.7 A5-86-1824Z • 408 30˝ 762 51 23 3.7 A5-86-1830Z • 418 18˝ 36˝ 914 56 25 3.7 A5-86-1836Z • 433 width 42˝ 1067 66 30 4.7 A5-86-1842Z • 473 (457mm) 48˝ 1219 71 32 4.7 A5-86-1848Z • 488 60˝ 1524 96 44 6.2 A5-86-1860Z • 558 72˝ 1829 111 50 7.2 A5-86-1872Z • 633 24˝ 610 51 23 3.7 A5-86-2124Z • 438 30˝ 762 56 25 3.7 A5-86-2130Z • 453 21˝ 36˝ 914 66 30 4.2 A5-86-2136Z • 468 width 42˝ 1067 71 32 5.7 A5-86-2142Z • 503 (533mm) 48˝ 1219 81 37 5.7 A5-86-2148Z • 518 60˝ 1524 101 46 6.7 A5-86-2160Z • 613 72˝ 1829 131 59 8.2 A5-86-2172Z • 723 24˝ 610 56 25 4.2 A5-86-2424Z • 468 30˝ 762 66 30 4.2 A5-86-2430Z • 478 24˝ 36˝ 914 76 35 4.2 A5-86-2436Z • 493 width 42˝ 1067 86 39 6.2 A5-86-2442Z • 558 (610mm) 48˝ 1219 91 41 6.2 A5-86-2448Z • 537 60˝ 1524 116 53 7.7 A5-86-2460Z • 673 72˝ 1829 141 64 9.2 A5-86-2472Z • 763

18

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

stainless model # list A5-86-1824S A5-86-1830S A5-86-1836S A5-86-1842S A5-86-1848S A5-86-1860S A5-86-1872S A5-86-2124S A5-86-2130S A5-86-2136S A5-86-2142S A5-86-2148S A5-86-2160S A5-86-2172S A5-86-2424S A5-86-2430S A5-86-2436S A5-86-2442S A5-86-2448S A5-86-2460S A5-86-2472S

1431 1441 1461 1686 1701 2111 2466 1616 1631 1641 1866 1876 2416 2826 1736 1746 1766 2071 2194 2511 3086


SHELVING / RETAIL DISPLAY Catalog Section 1

Add-A-Shelf® see spec sheet

WEIGHT CAPACITY:

EG01.11

• 300 lb. (136.1 kg); per shelf. - using an evenly distributed load. Note:

ted Paten 5,000

Top and bottom shelves of unit must be standard shelves. Post are sold separately (see page 20).

(For shelves with EAGLEbrite® or chrome finish, see page 7; For shelves with black, red, or white epoxy finish, see page 61).

# D 39

® WARNING: • Use Add-A-Shelf shelves for intermediate shelves. Add-A-Shelf® is not recommended for mobile applications.

Add-A-Shelf ® Collars allows addition or removal of shelf without breaking down the entire unit

description set of four

model # A208891

Freight class is 70.0.

list 11

(•) MTS (made to stock) / ( ) MTO (made to order)

• One set of four included with each shelf. • Must be used with split sleeves. To order: Model # PLASTIC SPLIT SLEEVES, list (per set of four): $5.

Patented QuadTruss® Design makes shelves up to 25% stronger and provides a retaining ledge for increased strength and product retention.

(Patent #5,390,803)

Add-A-Shelf® Adjustable Shelves - Patent # 5,884,567

14˝ width (356mm)

18˝ width (457mm)

21˝ width (533mm)

24˝ width (610mm)

length weight cu EAGLEbrite® in. mm lb. kg ft model # list 36˝ 914 8 3.6 0.5 A1436Z 63 48˝ 1219 10 4.5 0.7 A1448Z 73 36˝ 914 9 4.1 0.7 A1836Z 74 48˝ 1219 12 5.5 0.9 A1848Z 84 60˝ 1524 15 6.8 1.0 A1860Z 98 36˝ 914 11 5.0 0.8 A2136Z 80 48˝ 1219 14 6.4 1.1 A2148Z 92 60˝ 1524 17 7.7 1.3 A2160Z 109 36˝ 914 13 5.9 0.8 A2436Z 85 48˝ 1219 16 7.3 1.2 A2448Z 101 60˝ 1524 21 9.5 1.5 A2460Z 121

chrome model # list A1436C • 71 A1448C • 81 A1836C • 75 A1848C • 89 A1860C 103 A2136C 86 A2148C 99 A2160C 116 A2436C • 92 A2448C • 108 A2460C • 129

black model # list A1436BL • 71 A1448BL 81 A1836BL 75 A1848BL 89 A1860BL 103 A2136BL 86 A2148BL 99 A2160BL 116 A2436BL 92 A2448BL 108 A2460BL 129

red model # A1436R A1448R A1836R A1848R A1860R A2136R A2148R A2160R A2436R A2448R A2460R

white list model # list 71 A1436W 71 81 A1448W 81 75 A1836W 75 89 A1848W 89 103 A1860W 103 86 A2136W 86 99 A2148W 99 116 A2160W 116 92 A2436W 92 108 A2448W 108 129 A2460W 129

black model # list D1436BL 73 D1448BL 84 D1836BL 78 D1848BL 92 D2136BL 91 D2148BL 102 D2436BL 94 D2448BL 112

red model # D1436R D1448R D1836R D1848R D2136R D2148R D2436R D2448R

list 73 84 78 92 91 102 94 112

PACKAGING: • 36˝ and 48˝ lengths: Four per box. • 60˝ lengths: Two per box. • Four pairs split sleeves per shelf. • Four-pack collars per shelf.

Add-A-Shelf® Reverse Mat Shelves - Patent # 5,884,567

14˝ width (356mm)

18˝ width (457mm)

21˝ width (533mm)

24˝ width

Add-A-Shelf® Collar

HOW TO ASSEMBLE:

(610mm)

length weight cu EAGLEbrite® in. mm lb. kg ft model # list 36˝ 914 8 3.6 0.5 D1436Z 66 48˝ 1219 10 4.5 0.7 D1448Z 75 36˝ 914 9 4.1 0.7 D1836Z 76 48˝ 1219 12 5.5 0.9 D1848Z 86 36˝ 914 11 5.0 0.8 D2136Z 83 48˝ 1219 14 6.4 1.1 D2148Z 94 36˝ 914 13 5.9 0.8 D2436Z 89 48˝ 1219 16 7.3 1.2 D2448Z 103

chrome model # list D1436C 73 D1448C 84 D1836C 78 D1848C 92 D2136C 91 D2148C 102 D2436C 94 D2448C 112

white model # list D1436W 73 D1448W 84 D1836W 78 D1848W 92 D2136W 91 D2148W 102 D2436W 94 D2448W 112

Numerically calibrated grooved posts, tapered plastic split sleeves and shelf collars combine to make shelving assembly a SIMPLE 3 STEP EXERCISE:

1. Snap split sleeves onto post over the number of your choice.

2. Slide collar over split sleeves. When together, a positive lock is created without the use of tools.

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

3. Place shelf over collar to complete.

Add-A-Shelf ® as a merchandise display unit

19


SHELVING / RETAIL DISPLAY Catalog Section 1

Posts for Add-A-Shelf®

Freight class is 50.0.

see spec sheet

post height in. mm

weight lb. kg

cu ft

7˝ 14˝ 33˝ 54˝ 63˝ 74˝ 86˝

0.8 1.0 2.0 3.0 3.5 4.0 5.0

0.1 0.1 0.1 0.1 0.3 0.5 0.8

178 356 838 1372 1600 1880 2184

0.4 0.5 0.9 1.4 1.8 1.8 2.3

EG01.11

EAGLEbrite® model # list P7-Z • 13 P14-Z • 16 P33-Z • 19 P54-Z • 23 P63-Z • 24 P74-Z • 27 P86-Z • 33

(•) MTS (made to stock) / ( ) MTO (made to order)

chrome model # list P7-C • 13 P14-C • 16 P33-C • 19 P54-C • 23 P63-C • 24 P74-C • 27 P86-C • 33

Add-A-Shelf® Post Clamps

list 11

list 13 16 19 23 24 27 33

red model # list P7-R 13 P14-R 16 P33-R 19 P54-R 23 P63-R • 24 P74-R 27 P86-R 33

white model # P7-W P14-W P33-W P54-W P63-W P74-W P86-W

list 13 16 19 23 24 27 33

Freight class is 70.0.

see spec sheet zinc model # ADD-A-CLAMP

black model # P7-BL • P14-BL • P33-BL • P54-BL • P63-BL • P74-BL • P86-BL •

EG01.11

black epoxy model # ADD-A-CLAMP-BL

(•) MTS (made to stock) / ( ) MTO (made to order)

list 13

Add-A-Shelf® Starter Units see spec sheet

EG01.11

FEATURES:

• Front edge of shelf can be lowered 4˝ (102mm) to create slanted shelf. Note: Top and bottom shelves of unit must be standard shelves.

KIT INCLUDES: • Two standard shelves. • Two Add-A-Shelf® shelves. • Four Redi-Pak® posts. • Four bags of split sleeves. • Two bags of Add-A-Shelf® collars.

WARNING:

• Use Add-A-Shelf® shelves for intermediate shelves. Add-A-Shelf® is not recommended for mobile applications. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Patented QuadTruss® Design

ALL IN ONE BOX LOWERING SHIPPING COST! (Patent #5,390,803)

Units with 63˝ (1600mm) Posts length in. mm

14˝ width (356mm)

18˝ width (457mm)

21˝ width (533mm)

24˝ width (610mm)

20

36˝ 48˝ 36˝ 48˝ 36˝ 48˝ 36˝ 48˝

914 1219 914 1219 914 1219 914 1219

chrome model # RS4-63-A1436C RS4-63-A1448C RS4-63-A1836C RS4-63-A1848C RS4-63-A2136C RS4-63-A2148C RS4-63-A2436C RS4-63-A2448C

list 508 542 544 588 560 617 594 678

black epoxy model # RS4-63-A1436BL RS4-63-A1448BL RS4-63-A1836BL RS4-63-A1848BL RS4-63-A2136BL RS4-63-A2148BL RS4-63-A2436BL RS4-63-A2448BL

makes shelves up to 25% stronger and provides a retaining ledge for increased strength and product retention.

Units with 74˝ (1880mm) Posts list 508 542 544 588 560 617 594 678

chrome model # RS4-74-A1436C RS4-74-A1448C RS4-74-A1836C RS4-74-A1848C RS4-74-A2136C RS4-74-A2148C RS4-74-A2436C RS4-74-A2448C

list 541 575 577 620 593 648 625 709

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

black epoxy model # RS4-74-A1436BL RS4-74-A1448BL RS4-74-A1836BL RS4-74-A1848BL RS4-74-A2136BL RS4-74-A2148BL RS4-74-A2436BL RS4-74-A2448BL

list 541 575 577 620 593 648 625 709


SHELVING / RETAIL DISPLAY Catalog Section 1

Redi-Pak® Wire Shelving Units see spec sheet

EG01.26

4-SHELF UNITS: 5-SHELF UNITS:

• Four wire shelves. • Four two-piece posts. • Five wire shelves. • Four two-piece posts. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Patented QuadTruss® Design Packed and shipped in one box.

(Patent #5,390,803)

makes shelves up to 25% stronger and provides a retaining ledge for increased strength and product retention.

SAVES UP TO 20% ON SHIPPING COSTS!

4-Shelf Units, 63˝ (1600mm) Height

18˝ width (457mm)

24˝ width (610mm)

length in. mm

weight lb. kg

cu ft

36˝ 48˝ 60˝ 36˝ 48˝ 60˝

52 64 84 68 80 100

2.8 3.6 4.8 3.2 4.8 6.0

914 1219 1524 914 1219 1524

23.6 29.0 38.1 30.8 36.3 45.4

EAGLEbrite® model # list 1836Z63 385 1848Z63 435 1860Z63 513 2436Z63 441 2448Z63 504 2460Z63 593

chrome model # list 1836C63 411 1848C63 466 1860C63 528 2436C63 479 2448C63 553 2460C63 640

VALU-MASTER® model # list 1836V63 442 1848V63 501 1860V63 568 2436V63 516 2448V63 594 2460V63 689

Valu-Gard® model # list 1836VG63 442 1848VG63 501 1860VG63 568 2436VG63 516 2448VG63 594 2460VG63 689

EAGLEgard® model # list 1836E63 500 1848E63 591 1860E63 694 2436E63 589 2448E63 705 2460E63 795

chrome model # list 1836C74 418 1848C74 484 1860C74 540 2436C74 487 2448C74 566 2460C74 658

VALU-MASTER® model # list 1836V74 451 1848V74 521 1860V74 583 2436V74 524 2448V74 608 2460V74 706

Valu-Gard® model # list 1836VG74 451 1848VG74 521 1860VG74 583 2436VG74 524 2448VG74 608 2460VG74 706

EAGLEgard® model # list 1836E74 498 1848E74 571 1860E74 654 2436E74 576 2448E74 680 2460E74 774

chrome model # list 1836C63-5 494 1848C63-5 564 1860C63-5 647 2436C63-5 584 2448C63-5 683 2460C63-5 775

VALU-MASTER® model # list 1836V63-5 531 1848V63-5 606 1860V63-5 698 2436V63-5 626 2448V63-5 735 2460V63-5 835

Valu-Gard® model # list 1836VG63-5 531 1848VG63-5 606 1860VG63-5 698 2436VG63-5 626 2448VG63-5 735 2460VG63-5 835

EAGLEgard® model # list 1836E63-5 594 1848E63-5 696 1860E63-5 801 2436E63-5 704 2448E63-5 765 2460E63-5 945

chrome model # list 1836C74-5 514 1848C74-5 591 1860C74-5 671 2436C74-5 605 2448C74-5 703 2460C74-5 795

VALU-MASTER® model # list 1836V74-5 553 1848V74-5 636 1860V74-5 722 2436V74-5 653 2448V74-5 757 2460V74-5 854

Valu-Gard® model # list 1836VG74-5 553 1848VG74-5 636 1860VG74-5 722 2436VG74-5 653 2448VG74-5 757 2460VG74-5 854

EAGLEgard® model # list 1836E74-5 623 1848E74-5 723 1860E74-5 831 2436E74-5 732 2448E74-5 865 2460E74-5 973

4-Shelf Units, 74˝ (1880mm) Height

18˝ width (457mm)

24˝ width (610mm)

length in. mm

weight lb. kg

cu ft

36˝ 48˝ 60˝ 36˝ 48˝ 60˝

52 74 84 68 80 100

2.8 3.6 4.8 3.2 4.8 6.0

914 1219 1524 914 1219 1524

23.6 33.6 38.1 30.8 36.3 45.4

EAGLEbrite® model # list 1836Z74 393 1848Z74 454 1860Z74 503 2436Z74 455 2448Z74 528 2460Z74 615

5-Shelf Units, 63˝ (1600mm) Height

18˝ width (457mm)

24˝ width (610mm)

length in. mm

weight lb. kg

cu ft

36˝ 48˝ 60˝ 36˝ 48˝ 60˝

61 76 101 81 96 121

3.5 4.5 6.0 4.0 6.0 7.5

914 1219 1524 914 1219 1524

27.7 34.5 45.8 36.7 43.6 54.9

EAGLEbrite® model # list 1836Z63-5 464 1848Z63-5 531 1860Z63-5 581 2436Z63-5 540 2448Z63-5 625 2460Z63-5 731

5-Shelf Units, 74˝ (1880mm) Height

18˝ width (457mm)

24˝ width (610mm)

length in. mm

weight lb. kg

cu ft

36˝ 48˝ 60˝ 36˝ 48˝ 60˝

61 76 101 81 96 121

3.5 4.5 6.0 4.0 6.0 7.5

914 1219 1524 914 1219 1524

27.7 34.5 45.8 36.7 43.6 54.9

EAGLEbrite® model # list 1836Z74-5 465 1848Z74-5 548 1860Z74-5 591 2436Z74-5 558 2448Z74-5 644 2460Z74-5 749

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

21


SHELVING / RETAIL DISPLAY Catalog Section 1

Redi-Pak® Utility Carts

• Medium-duty 500 lb. (227 kg).

WEIGHT CAPACITY:

see spec sheet

EG01.10

361⁄2˝ (927mm) height. One handle. Two posts. Four resilient 4˝ (102mm) casters with donut bumpers. • Either two or three chrome shelves with built-in 1˝ (25mm) ledge on three sides. All items can be shipped UPS. • • • •

INCLUDES:

Freight class is 70.0.

Packed and shipped in one box.

(•) MTS (made to stock) / ( ) MTO (made to order)

SAVES UP TO 20%

Easy handling and inventory tracking!

ON SHIPPING COSTS!

2-Shelf Unit width

18˝ (457mm)

length cubic weight in. mm feet lb. kg 36˝

914

3.0

38

17.2

3-Shelf Unit

model # U2-1836C-RP

list 312

weight lbs. kg 45

20.4

see spec sheet EG01.03E

18˝ width (457mm)

21˝ width (533mm)

24˝ width (610mm)

length in. mm

weight lb. kg

cu ft

36˝ 48˝ 36˝ 48˝ 36˝ 48˝ 24˝ 36˝ 48˝

7 10 9 11 11 13 9 12 15

0.5 0.7 0.7 0.9 0.8 1.1 0.8 0.8 1.2

914 1219 914 1219 914 1219 610 914 1219

3.2 4.5 4.1 4.9 4.9 5.9 4.1 5.4 6.8

Freight class is 70.0.

EAGLEbrite® model # list RM1436Z 59 RM1448Z 68 RM1836Z 69 RM1848Z 80 RM2136Z 76 RM2148Z 86 RM2424Z 76 RM2436Z 81 RM2448Z 97

chrome model # RM1436C RM1448C RM1836C RM1848C RM2136C RM2148C RM2424C RM2436C RM2448C

list 66 78 71 84 83 96 81 86 104

Label Holders for Reverse Mat Shelves see spec sheet EG01.03E length fits shelf size in. mm in. mm model # 31⁄4˝ 83 all A225494 13˝ 330 18˝ 457 A225512 19˝ 483 24˝ 610 A225513 25˝ 635 30˝ 762 A225514 31˝ 787 36˝ 914 A225515 43˝ 1092 48˝ 1219 A225516 45˝ 1143 48˝ 1219 A225517 55˝ 1397 60˝ 1524 A225518 67˝ 1702 72˝ 1829 A225519

22

(Patent #5,390,803)

WEIGHT CAPACITY:

Shelves have built-in ledges which prevent contents from falling off!

(356mm)

list 378

• 250 lb. (113 kg); per shelf.

Reverse Mat Shelves

14˝ width

model # U3-1836C-RP

list 6 9 11 14 23 25 44 46 48

FEATURES:

(•) MTS (made to stock) / ( ) MTO (made to order)

Patented QuadTruss® Design (Patent #5,390,803)

black model # RM1436BL RM1448BL • RM1836BL RM1848BL RM2136BL RM2148BL RM2424BL RM2436BL RM2448BL

makes shelves up to 25% stronger and provides a retaining ledge for increased strength and product retention.

red list model # 66 RM1436R 78 RM1448R 71 RM1836R 84 RM1848R 83 RM2136R 96 RM2148R 81 RM2424R 86 RM2436R 104 RM2448R

white list model # list 66 RM1436W 66 78 RM1448W 78 71 RM1836W 71 84 RM1848W 84 83 RM2136W 83 96 RM2148W 96 81 RM2424W 81 86 RM2436W 86 104 RM2448W 104

• Clear plastic. • Snaps onto shelf edge. • Provides easy identification of shelf contents or section. • Holds 11⁄4˝ (32mm) high labels. Note:

These also work on standard shelves.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


SHELVING / RETAIL DISPLAY Catalog Section 1

Double-Mat Wire Shelves see spec sheet

FEATURES:

EG01.49

• Heavy duty open wire shelf design: mat wires are spaced only 7/16˝ (11mm) apart. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Accommodates round-bottomed soda bottles and small-legged appliances.

Patented QuadTruss® Design makes shelves up to 25% stronger and provides a retaining ledge for increased strength and product retention.

(Patent #5,390,803)

length weight EAGLEbrite® zinc VALU-MASTER® in. mm lb. kg model # list model # list 36˝ 914 14 6.4 DWS1836Z 82 DWS1836V 98 18˝ width 48˝ 1219 18 8.2 DWS1848Z 99 DWS1848V 113 (457mm) 60˝ 1524 22 10.0 DWS1860Z 119 DWS1860V 136 36˝ 914 17 7.7 DWS2436Z 99 DWS2436V 117 24˝ width 48˝ 1219 22 10.0 DWS2448Z 118 DWS2448V 140 (610mm) 60˝ 1524 27 12.2 DWS2460Z 145 DWS2460V 167

double-mat wire shelves assembled with 33˝ (838mm) posts (posts sold separately – see page 10)

Double-Mat Wire Shelf Starter Units see spec sheet

EG01.49

Accommodates round-bottomed soda bottles and small-legged appliances.

Valu-Gard® model # DWS1836VG DWS1848VG DWS1860VG DWS2436VG DWS2448VG DWS2460VG

list 98 113 136 117 140 167

• Heavy duty open wire shelf design: mat wires are spaced only 7/16˝ (11mm) apart. • Four double-mat wire shelves. • Four 63˝ or 74˝ (1600 or 1880mm) high posts (same finish as shelves). FEATURES: Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Patented QuadTruss® Design (Patent #5,390,803)

makes shelves up to 25% stronger and provides a retaining ledge for increased strength and product retention.

Models with 63˝ (1600mm) Height

18˝ width (457mm)

24˝ width (610mm)

length in. mm

weight lb. kg

36˝ 48˝ 60˝

914 1219 1524

70 86 102

31.8 39.0 46.3

36˝ 48˝ 60˝

914 1219 1524

82 102 122

37.2 46.3 55.3

EAGLEbrite® zinc model # DWS4-63-1836Z DWS4-63-1848Z DWS4-63-1860Z DWS4-63-2436Z DWS4-63-2448Z DWS4-63-2460Z

list 425 493 573 493 568 678

VALU-MASTER® model # list DWS4-63-1836V 497 DWS4-63-1848V 556 DWS4-63-1860V 648 DWS4-63-2436V 544 DWS4-63-2448V 665 DWS4-63-2460V 775

list 438 505 585 505 581 691

VALU-MASTER® model # list DWS4-74-1836V 505 DWS4-74-1848V 564 DWS4-74-1860V 657 DWS4-74-2436V 581 DWS4-74-2448V 674 DWS4-74-2460V 783

Valu-Gard® model # DWS4-63-1836VG DWS4-63-1848VG DWS4-63-1860VG DWS4-63-2436VG DWS4-63-2448VG DWS4-63-2460VG

list 497 556 648 544 665 775

Models with 74˝ (1880mm) Height

18˝ width (457mm)

24˝ width (610mm)

length in. mm

weight lb. kg

36˝ 48˝ 60˝

914 1219 1524

72 88 104

32.7 39.9 47.2

36˝ 48˝ 60˝

914 1219 1524

84 104 124

38.1 47.2 56.2

EAGLEbrite® zinc model # DWS4-74-1836Z DWS4-74-1848Z DWS4-74-1860Z DWS4-74-2436Z DWS4-74-2448Z DWS4-74-2460Z

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

Valu-Gard® model # DWS4-74-1836VG DWS4-74-1848VG DWS4-74-1860VG DWS4-74-2436VG DWS4-74-2448VG DWS4-74-2460VG

list 505 564 657 581 674 783

23


SHELVING / RETAIL DISPLAY Catalog Section 1

Convert your existing shelving unit by adding cradle wine shelves onto standard posts.

Cradle Wine Shelves

Freight class is 70.0.

see spec sheet

EG01.20

(•) MTS (made to stock) / ( ) MTO (made to order)

Each bottle is “cradled” by heavy gauge wire to avoid movement.

in.

14˝ width (posts sold separately — see page 10)

(356mm)

length mm

36˝ 48˝

914 1219

weight lb. kg

cu ft

capacity (750ml bottles)

7 9

1.0 1.3

9 12

3.2 4.1

Bulk Wine Shelf Units see spec sheet

EG01.24

FEATURES:

Largest capacity offered in the industry; bottles are stored in bulk. in.

14˝ width (356mm)

length mm

36˝ 48˝

914 1219

black epoxy model # list W1436BL 121 W1448BL 139

• Each compartment is adjustable for bottle diameter. • Holds one dozen bottles per compartment. • Bottles are retained with removable dividers, back panels and end panels. • Panels are chrome plated. • 74˝ (1880mm) height. Note:

Not for mobile applications.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

weight lb. kg 140 160

chrome model # list W1436C • 121 W1448C • 139

63.5 72.5

cu ft

capacity (750ml bottles)

5 9

180 240

chrome model # list BW1436C 2163 BW1448C 2768

black epoxy model # list BW1436BL 2163 BW1448BL 2768

chrome model # list BW1436C-SC 3280 BW1448C-SC 3864

black epoxy model # list BW1436BL-SC 3280 BW1448BL-SC 3864

Bulk Wine Shelf Units with Security Doors in.

14˝ width (356mm)

NEW

length mm

36˝ 48˝

914 1219

weight lb. kg 183 205

83.0 93.0

Wine Glass Racks see spec sheet EG01.03E length in. mm 18˝ 24˝

24

457 610

cu ft

capacity (750ml bottles)

5 9

180 240

• Fits onto underside of existing wire shelves or wire overshelves. FEATURES: • 18˝ & 24˝ (457 & 610mm) lengths available. • No hardware or tools required for installation.

zinc chrome model # list ea model # list ea WGR18-Z 31 WGR18-C 34 WGR24-Z 35 WGR24-C 38

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


SHELVING / RETAIL DISPLAY Catalog Section 1

Created with standard shelving by adding a series of rods, tabs and enclosure panels.

Enclosure Panels

INCLUDES:

• Four retaining clamps.

see spec sheet EG01.03A

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Helps secure shelf contents, enclosing the backs and sides of unit.

shelf

18˝ width (457mm)

24˝ width (610mm)

panel width in. mm

post height in. mm

weight lb. kg

14˝ 14˝ 14˝ 14˝ 20˝ 20˝ 20˝ 20˝

54˝ 63˝ 74˝ 86˝ 54˝ 63˝ 74˝ 86˝

6 7 8 9 9 10 11 12

356 356 356 356 233 233 233 233

1372 1600 1880 2184 1372 1600 1880 2184

2.7 3.2 3.6 4.1 4.1 4.5 5.0 5.4

Note: These do not work with corner castings of solid shelves. Recommended for use with wire shelves only.

cubic feet 1.5 1.8 2.0 2.3 2.1 2.3 2.6 2.8

chrome model # list E1854-C 83 E1863-C • 87 E1874-C • 91 E1886-C 142 E2454-C 100 E2463-C • 104 E2474-C • 109 E2486-C 159

stainless model # list E1854-S 162 E1863-S 169 E1874-S 182 E1886-S 200 E2454-S 195 E2463-S 211 E2474-S 221 E2486-S 240

CONSULT THESE TABLES FOR PANEL REQUIREMENTS:

End Panels

Back Panels

shelf length in. mm 30˝ 36˝ 42˝

762 914 1067

48˝ 54˝

1092 1372

60˝

1524

72˝

1829

shelf length in. mm 18˝ 21˝ 24˝ 30˝ 36˝

457 533 610 762 914

54˝ (1372mm) post ht. 63˝ (1600mm) post ht. 74˝ (1880mm) post ht. 86˝ (2184mm) post ht. —panel(s) required —panel(s) required —panel(s) required —panel(s) required (1) E2454 (1) E2463 (1) E2474 (1) E2486 (2) E1854 (2) E1863 (2) E1874 (2) E1886 (1) E1854 (1) E1863 (1) E1874 (1) E1886 (1) E2454 (1) E2463 (1) E2474 (1) E2486 (2) E2454 (2) E2463 (2) E2474 (2) E2486 (2) E1854 (2) E1863 (2) E1874 (2) E1886 (1) E2454 (1) E2463 (1) E2474 (1) E2486 (2) E2454 (2) E2463 (2) E2474 (2) E2486 (1) E1854 (1) E1863 (1) E1874 (1) E1886 (3) E2454 (3) E2463 (3) E2474 (3) E2486 54˝ (1372mm) post ht. 63˝ (1600mm) post ht. 74˝ (1880mm) post ht. 86˝ (2184mm) post ht. —panel(s) required —panel(s) required —panel(s) required —panel(s) required (1) E1854 (1) E1863 (1) E1874 (1) E1886 (1) E1854 (1) E1863 (1) E1874 (1) E1886 (1) E2454 (1) E2463 (1) E2474 (1) E2486 (1) E2454 (1) E2463 (1) E2474 (1) E2486 (2) E1854 (2) E1863 (2) E1874 (1) E1886

Rods and Tabs see spec sheet EG01.03D chrome model # list ea R54-C 29 R63-C • 32 R74-C • 37 R86-C • 41

stainless steel model # list ea R54-S 43 R63-S 45 R74-S 54 R86-S 58

FEATURES:

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

Clip for Solid Shelves (ONLY) spec sheet EG01.03A model # A204318

list 2

• Used to enclose backs or sides of shelving units to prevent contents from falling. • Also used to partition shelving units by positioning rods interior to shelves. • Model number indicates height. • Each rod comes with four tabs. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

25


SHELVING / RETAIL DISPLAY Catalog Section 1

see spec sheets EG01.03E

Fits on 24˝ (610mm) wide shelves. Rack is front loading. Front dispensing. Gravity fed. Made of chrome-plated mild steel and heavy gauge wire. • Each rack holds eight #10 cans or twelve #5 cans.

• • • • •

Wire Can Rack and Wire Can Rack Systems EG01.15

CAN RACK:

RACK SYSTEMS:

• 24˝ x 36˝ (610 x 914mm) wire shelves. • Four 63˝ (1600mm) post. • Standard can rack Freight class is 70.0.

wire can rack (•) MTS (made to stock) / ( ) MTO (made to order)

3-tier wire can rack system with dunnage shelf

description

weight lb. kg

cu ft

capacity (#10 cans)

individual wire can rack wire can rack system with bottom dunnage 3-tier wire can rack system, 24˝ x 36˝ shelves 4-tier wire can rack system, 24˝ x 36˝ shelves

7 120 137 178

1.8 19.3 25.2 33.2

8 124 96 128

3.2 54.4 62.1 80.7

* System holds 64 racked cans plus 10 boxes of 6 cans each on the dunnage shelf.

Plate Display Shelving see spec sheet

EG01.37

FEATURES:

Wire shelves allow for smaller items to be displayed also, while open-wire construction helps prevent dust build-up!

• Black epoxy finish. • Reverse mat wire shelf features built-in ledges. • Bottom of plates rest behind built-in ledges, and top of plates rest on truss rails that run end-to-end. Note:

Shelves and posts sold separately.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Posts for Plate Display Shelving

Reverse Mat Shelf for Plate Display Shelving • Includes one pair of end-to-end truss rails, and one pair of front-to-back truss assemblies. four plate display shelves and posts shown assembled

width

18˝ (457mm)

length weight in. mm lbs. kg

cu ft

72˝

2.1

1829

30

13.6

list per model # shelf PDS1872BL 247

Cantilever Shelves see spec sheet EG01.03E

FEATURES:

weight lb. kg

24˝ 30˝ 36˝ 42˝ 48˝ 54˝ 60˝

5 5 6 7 8 9 10

26

610 762 914 1067 1219 1372 1524

2.3 2.3 2.7 3.2 3.6 4.1 4.5

cubic feet 0.5 0.8 0.8 0.9 1.0 1.1 1.3

chrome model # list CS1224-C 59 CS1230-C 65 CS1236-C 74 CS1242-C 83 CS1248-C 85 CS1254-C 91 CS1260-C 98

stainless steel model # list CS1224-S 211 CS1230-S 226 CS1236-S 241 CS1242-S 255 CS1248-S 267 CS1254-S 285 CS1260-S 316

height weight cu in. mm lbs. kg ft model # 33˝ 838 2.0 0.9 0.1 P33-BL • 54˝ 1372 3.0 1.4 0.1 P54-BL • 63˝ 1600 3.5 1.8 0.3 P63-BL • 74˝ 1880 4.0 1.8 0.5 P74-BL • 86˝ 2184 5.0 2.3 0.8 P86-BL •

list 19 23 24 27 33

• 1˝ (25mm) wraparound ledge. • 12˝ (305mm) wide shelves. NOTE:

length in. mm

model # list CRC • 116 CRC2 * 1399 CRC3 1757 CRC4 2308

When ordering back posts, confirm with customer service, the correct post height to accommodate these shelves.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

Ideal for adding extra storage above an existing shelving unit. Packaged two per box.


SHELVING / RETAIL DISPLAY Catalog Section 1 A highly flexible and maneuverable transport product which can be configured in either wire or solid shelves, or a combination of both.

Medium Duty Utility Carts

WEIGHT CAPACITY:

see spec sheet

EG01.10

INCLUDES:

(Patent #5,390,803)

• 500 lb. (227 kg) maximum. • • • •

Two chrome handles. Four resilient rubber casters. 18˝ wide carts have 4˝ (102mm) casters. 21˝ and 24˝ carts have 5˝ (127mm) casters.

Note:

®

Patented QuadTruss Design

LIFESTOR® Utility Carts available (see page 83). See page 28 for optional stainless steel handles.

makes shelves up to 25% stronger and provides a retaining ledge for increased strength and product retention.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

2-Shelf Units width

length in. mm

cu ft

weight lbs. kg

EAGLEbrite® chrome model # list model # EU2-1824Z • 373 EU2-1824C • EU2-1830Z • 384 EU2-1830C • EU2-1836Z • 394 EU2-1836C • EU2-2136Z • 441 EU2-2136C • EU2-2436Z • 411 EU2-2436C •

stainless steel list model # list 415 EU2-1824S 906 423 EU2-1830S 911 442 EU2-1836S 918 491 EU2-2136S 1021 460 EU2-2436S 1080

EAGLEbrite® chrome model # list model # EU3-1824Z • 435 EU3-1824C • EU3-1830Z • 452 EU3-1830C • EU3-1836Z • 466 EU3-1836C • EU3-2136Z • 526 EU3-2136C • EU3-2436Z • 497 EU3-2436C •

stainless steel list model # list 481 EU3-1824S 1179 496 EU3-1830S 1185 521 EU3-1836S 1196 585 EU3-2136S 1340 557 EU3-2436S 1426

24˝ 610 2.5 32 14.5 30˝ 762 2.5 35 15.8 36˝ 914 2.5 38 17.2 including 21˝ (533mm) 36˝ 914 2.9 42 19.1 casters 24˝ (610mm) 36˝ 914 2.9 45 20.4 * Stainless steel carts are 40˝ (1016mm) height. Chrome carts 373⁄4˝ (959mm) height including casters.

40˝ height* 18˝ (457mm) (1016mm)

3-Shelf Units width

length in. mm

cu ft

weight lbs. kg

24˝ 610 2.5 37 16.7 30˝ 762 2.5 41 18.5 (1016mm) 36˝ 914 2.5 45 20.4 including 21˝ (533mm) 36˝ 914 2.9 48 21.8 casters 24˝ (610mm) 36˝ 914 2.9 58 26.3 * Stainless steel carts are 40˝ (1016mm) height. Chrome carts 373⁄4˝ (959mm) height including casters.

40˝ height* 18˝ (457mm)

Utility Carts with Solid Shelf see spec sheet

EG01.10 INCLUDES:

• • • •

Two chrome handles. Four casters. Two chrome finish open-wire shelves. One stainless steel solid shelf.

Note: (Patent #5,390,803)

LIFESTOR® Utility Carts available (see page 83). See page 28 for optional stainless steel handles.

Freight class is 70.0.

®

Patented QuadTruss Design makes shelves up to 25% stronger and provides a retaining ledge for increased strength and product retention.

width

373⁄4˝ height 18˝ (457mm) (959mm) including casters

21˝ (533mm) 24˝ (610mm)

length in. mm 24˝ 30˝ 36˝ 36˝ 36˝

610 762 914 914 914

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

(•) MTS (made to stock) / ( ) MTO (made to order)

caster diameter in. mm 4˝ 4˝ 4˝ 5˝ 5˝

102 102 102 127 127

weight lbs. kg

cu ft

36 39 42 65 71

2.5 2.5 2.5 2.9 3.3

16.3 17.7 19.1 29.5 32.2

model # EU3-1824CS EU3-1830CS EU3-1836CS U3-2136CS U3-2436CS

list 694 713 762 798 812

27


SHELVING / RETAIL DISPLAY Catalog Section 1

Heavy Duty Utility Carts

WEIGHT CAPACITY:

see spec sheet

EG01.10 INCLUDES:

• 800 lb. (363 kg) maximum. • Two handles (see below)—one on each end. • Four 5˝ (127mm) resilient rubber casters. Note:

LIFESTOR® Utility Carts available (see page 83).

Freight class is 70.0.

(Patent #5,390,803)

Patented QuadTruss® Design

(•) MTS (made to stock) / ( ) MTO (made to order)

makes shelves up to 25% stronger and provides a retaining ledge for increased strength and product retention.

2-Shelf Units

18˝ width (457mm)

40˝ height* (1016mm)

21˝ width (533mm)

including casters

24˝ width (610mm)

length in. mm

cu ft

weight lbs. kg

36˝ 42˝ 36˝ 42˝ 48˝ 36˝ 42˝ 48˝ 60˝

2.5 2.9 2.9 3.4 3.9 3.3 3.9 4.4 5.5

38 41 42 44 48 46 50 52 62

914 1067 914 1067 1219 914 1067 1219 1524

17.2 18.5 19.1 20.0 21.8 20.9 22.7 23.6 28.1

EAGLEbrite® chrome model # list model # U2-1836Z • 381 U2-1836C • U2-1842Z • 429 U2-1842C • U2-2136Z • 426 U2-2136C • U2-2142Z • 443 U2-2142C • U2-2148Z • 458 U2-2148C • U2-2436Z • 432 U2-2436C • U2-2442Z • 457 U2-2442C • U2-2448Z • 461 U2-2448C • U2-2460Z • 503 U2-2460C •

stainless steel list model # list 428 U2-1836S 963 445 U2-1842S 1071 477 U2-2136S 1048 495 U2-2142S 1146 517 U2-2148S 1151 446 U2-2436S 1107 471 U2-2442S 1242 494 U2-2448S 1247 545 U2-2460S 1439

* Stainless steel carts are 40˝ (1016mm) height. Chrome carts 373⁄4˝ (959mm) height including casters.

3-Shelf Units length in. mm

cu ft

weight lbs. kg

18˝ width

EAGLEbrite® model # list U3-1836Z • 454 U3-1842Z • 478 U3-2136Z • 514 U3-2142Z • 538 U3-2148Z • 560 U3-2436Z • 511 U3-2442Z • 547 U3-2448Z • 554 U3-2460Z • 618

36˝ 914 2.5 48 21.8 42˝ 1067 2.9 52 23.6 36˝ 914 2.9 53 24.0 21˝ width 40˝ height* 42˝ 1067 3.4 56 25.4 (533mm) (1016mm) 48˝ 1219 3.9 62 28.1 36˝ 914 3.3 59 26.8 including casters 24˝ width 42˝ 1067 3.9 65 29.5 (610mm) 48˝ 1219 4.4 68 30.8 60˝ 1524 5.5 83 37.6 * Stainless steel carts are 40˝ (1016mm) height. Chrome carts 373⁄4˝ (959mm) height including casters. (457mm)

chrome model # U3-1836C • U3-1842C • U3-2136C • U3-2142C • U3-2148C • U3-2436C • U3-2442C • U3-2448C • U3-2460C •

Handles for Utility Carts

width mm

18˝ 21˝ 24˝

457 533 610

stainless steel model # list U3-1836S 1241 U3-1842S 1403 U3-2136S 1367 U3-2142S 1515 U3-2148S 1522 U3-2436S 1455 U3-2442S 1657 U3-2448S 1663 U3-2460S 1952

Freight class is 70.0.

see spec sheet EG01.03B

in.

list 509 534 572 599 632 542 578 615 691

weight lbs. kg 4.0 4.2 4.5

1.8 1.9 2.1

cubic feet 0.9 0.9 0.9

(•) MTS (made to stock) / ( ) MTO (made to order)

chrome* model # list UH18-C • 54 UH21-C • 64 UH24-C • 68

stainless steel** model # list UH18-S 107 UH21-S 108 UH24-S 111

*311⁄2˝ (800mm) height without casters **333⁄8˝ (848mm) height without casters

28

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


SHELVING / RETAIL DISPLAY Catalog Section 1

Wire Basket Utility Carts product announcement

EG8095 FEATURES:

• Swivel stem casters with bumpers and two push handles. • 361⁄2˝ (927mm) overall cart height. Note:

Additional Wire Basket available (see page 39).

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

description

weight lbs. kg

1 chrome basket shelf, 1 chrome standard shelf 2 chrome basket shelves

31 32

Black Polymer Utility Cart

WEIGHT CAPACITY:

see product announcement

EG8109

Utilizes three heavy duty black polymer shelves and utility handles!

height

width

373⁄4˝(959mm)

185⁄8˝ (473mm)

FEATURES:

14.1 14.5

model # WBC1836C-1B1W WBC1836C-2B

list 342 300

• 200 lb. (90.7 kg). • Four 4˝ (102mm) diameter swivel casters, two with brake. • 1˝ (25mm) diameter chrome-plated posts. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

length weight in. mm lbs. kg 335⁄8˝

854

30

13.6

model # EU3-2030-P

list 731

including casters

Triangle Shelf

• Attached to standard posts (sold separately— see pages 10 and 20), can be a freestanding unit. • Or added onto standard 18˝ wide wire shelving (page 7) via “S” hooks.

see spec sheet EG01.03E FEATURES:

Freight class is 70.0.

width

18˝ (457mm)

weight lbs. kg 16

7.3

chrome model # list TR18C 61

black epoxy model # list TR18BL 61

(•) MTS (made to stock) / ( ) MTO (made to order)

Go Green. Go Eagle. Look for the tag on the bar code

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

29


SHELVING / RETAIL DISPLAY Catalog Section 1

Stem Caster Carts

Freight class is 70.0.

see spec sheet

EG01.07

weight lbs. kg

36˝ length

cu ft

58

26.3

2.6

70

31.7

3.5

86

39.0

4.4

67

30.4

3.0

79

35.8

4.0

96

43.5

5.0

74

33.5

3.5

90

40.8

4.5

110

49.9

5.6

(914mm)

18˝ 48˝ width length (457mm) (1219mm)

INCLUDES: • Four 63˝ (1600mm) posts. • Four shelves. • Plastic split sleeves. • Donut bumpers. • Indicated 5˝ x 11⁄4˝ (127 x 32mm) casters. • 68˝ (1727mm) overall height. • Fast assembly without the use of tools. • Shipped knocked-down.

60˝ length (1524mm)

36˝ length (914mm)

48˝ 21˝ width length (533mm) (1219mm)

60˝ length (Patent #5,390,803)

Patented QuadTruss® Design makes shelves up to 25% stronger and provides a retaining ledge for increased strength and product retention.

(1524mm)

36˝ length (914mm)

48˝ 24˝ width length (610mm) (1219mm)

60˝ length (1524mm)

30

(•) MTS (made to stock) / ( ) MTO (made to order)

caster type

wheel tread

swivel swivel swivel/brake swivel/brake swivel/rigid swivel/rigid swivel swivel swivel/brake swivel/brake swivel/rigid swivel/rigid swivel swivel swivel/brake swivel/brake swivel/rigid swivel/rigid swivel swivel swivel/brake swivel/brake swivel/rigid swivel/rigid swivel swivel swivel/brake swivel/brake swivel/rigid swivel/rigid swivel swivel swivel/brake swivel/brake swivel/rigid swivel/rigid swivel swivel swivel/brake swivel/brake swivel/rigid swivel/rigid swivel swivel swivel/brake swivel/brake swivel/rigid swivel/rigid swivel swivel swivel/brake swivel/brake swivel/rigid swivel/rigid

resilient poly resilient poly resilient poly resilient poly resilient poly resilient poly resilient poly resilient poly resilient poly resilient poly resilient poly resilient poly resilient poly resilient poly resilient poly resilient poly resilient poly resilient poly resilient poly resilient poly resilient poly resilient poly resilient poly resilient poly resilient poly resilient poly resilient poly

EAGLEbrite® model # list CC1836Z-S • 566 CC1836Z-SP • 616 CC1836Z-SB • 576 CC1836Z-SBP • 625 CC1836Z-SR • 613 CC1836Z-SRP • 669 CC1848Z-S • 624 CC1848Z-SP • 675 CC1848Z-SB • 635 CC1848Z-SBP • 684 CC1848Z-SR • 672 CC1848Z-SRP • 727 CC1860Z-S • 744 CC1860Z-SP • 794 CC1860Z-SB • 754 CC1860Z-SBP • 803 CC1860Z-SR • 791 CC1860Z-SRP • 846 CC2136Z-S • 627 CC2136Z-SP • 641 CC2136Z-SB • 637 CC2136Z-SBP • 686 CC2136Z-SR • 676 CC2136Z-SRP • 732 CC2148Z-S • 699 CC2148Z-SP • 748 CC2148Z-SB • 708 CC2148Z-SBP • 758 CC2148Z-SR • 747 CC2148Z-SRP • 803 CC2160Z-S • 804 CC2160Z-SP • 855 CC2160Z-SB • 815 CC2160Z-SBP • 864 CC2160Z-SR • 854 CC2160Z-SRP • 909 CC2436Z-S • 632 CC2436Z-SP • 681 CC2436Z-SB • 641 CC2436Z-SBP • 655 CC2436Z-SR • 683 CC2436Z-SRP • 740 CC2448Z-S • 720 CC2448Z-SP • 769 CC2448Z-SB • 729 CC2448Z-SBP • 780 CC2448Z-SR • 773 CC2448Z-SRP • 827 CC2460Z-S • 808 CC2460Z-SP • 857 CC2460Z-SB • 819 CC2460Z-SBP • 866 CC2460Z-SR • 859 CC2460Z-SRP • 916

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

chrome model # CC1836C-S • CC1836C-SP • CC1836C-SB • CC1836C-SBP • CC1836C-SR • CC1836C-SRP • CC1848C-S • CC1848C-SP • CC1848C-SB • CC1848C-SBP • CC1848C-SR • CC1848C-SRP • CC1860C-S • CC1860C-SP • CC1860C-SB • CC1860C-SBP • CC1860C-SR • CC1860C-SRP • CC2136C-S • CC2136C-SP • CC2136C-SB • CC2136C-SBP • CC2136C-SR • CC2136C-SRP • CC2148C-S • CC2148C-SP • CC2148C-SB • CC2148C-SBP • CC2148C-SR • CC2148C-SRP • CC2160C-S • CC2160C-SP • CC2160C-SB • CC2160C-SBP • CC2160C-SR • CC2160C-SRP • CC2436C-S • CC2436C-SP • CC2436C-SB • CC2436C-SBP • CC2436C-SR • CC2436C-SRP • CC2448C-S • CC2448C-SP • CC2448C-SB • CC2448C-SBP • CC2448C-SR • CC2448C-SRP • CC2460C-S • CC2460C-SP • CC2460C-SB • CC2460C-SBP • CC2460C-SR • CC2460C-SRP •

list 580 631 589 640 627 683 657 707 668 718 703 759 764 814 775 824 809 865 646 696 656 706 695 752 738 787 747 797 786 843 842 892 852 901 891 931 653 702 662 713 704 760 760 811 772 821 813 869 877 927 887 937 928 984


SHELVING / RETAIL DISPLAY Catalog Section 1

Cart Covers see spec sheet

EG01.09

FEATURES:

Light weight easy to handle !

• Top corners are reinforced. • Choice of white coated, white uncoated, or 20 gauge transparent film. • Coated and uncoated cart covers are available in light blue (LB) and light green (LG). • Covers are nonreturnable. Note: Cart covers to fit Security Units (pages 41-42) available. To order cart cover for Stationary or Mobile Security Unit, add suffix “-S” to end of model number (ex: CV-63-2436-S) and add 20% to list price. To order cart cover for Dolly Truck Security Unit, add suffix “-D” to end of model number (ex: CV-63-2436-D) and add 20% to list price.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

cart cover enveloping entire cart/truck

Meets J.C.A.H. standards for transporting clean linen!

cart cover with panel folded back for easy shelf accessibility

White Uncoated Polyester

White Coated Nylon*

18˝ width (457mm)

21˝ width (533mm)

24˝ width

length in. mm

post height weight in. mm lbs. kg

36˝

54˝ 63˝ 54˝ 63˝ 54˝ 63˝ 54˝ 63˝ 74˝ 54˝ 63˝ 74˝ 54˝ 63˝ 54˝ 63˝ 74˝ 86˝ 54˝ 63˝ 74˝ 86˝ 54˝ 63˝ 74˝ 86˝ 54˝ 63˝ 74˝ 86˝

914

48˝ 1219 60˝ 1524

48˝ 1219

60˝ 1524 24˝

610

36˝

914

48˝ 1219

(610mm)

60˝ 1524

72˝ 1829

1372 1600 1372 1600 1372 1600 1372 1600 1880 1372 1600 1880 1372 1600 1372 1600 1880 2184 1372 1600 1880 2184 1372 1600 1880 2184 1372 1600 1880 2184

3

1.4

4

1.8

5

2.3

4

1.8

5

2.3

3

1.4

3

1.4

4

1.8

5

2.3

6

2.7

cu zipper ft model # 1 CZC-54-1836 CZC-63-1836 1 CZC-54-1848 CZC-63-1848 1 CZC-54-1860 CZC-63-1860 CZC-54-2148 1 CZC-63-2148 CZC-74-2148 CZC-54-2160 1 CZC-63-2160 CZC-74-2160 1 CZC-54-2424 CZC-63-2424 CZC-54-2436 1 CZC-63-2436 CZC-74-2436 CZC-86-2436 CZC-54-2448 1 CZC-63-2448 CZC-74-2448 CZC-86-2448 CZC-54-2460 1 CZC-63-2460 CZC-74-2460 CZC-86-2460 CZC-54-2472 1 CZC-63-2472 CZC-74-2472 CZC-86-2472

list 225 226 231 236 241 246 259 276 300 283 276 291 262 267 276 281 287 292 281 287 300 324 283 293 304 307 313 319 324 329

velcro model # CVC-54-1836 CVC-63-1836 CVC-54-1848 CVC-63-1848 CVC-54-1860 CVC-63-1860 CVC-54-2148 CVC-63-2148 CVC-74-2148 CVC-54-2160 CVC-63-2160 CVC-74-2160 CVC-54-2424 CVC-63-2424 CVC-54-2436 CVC-63-2436 CVC-74-2436 CVC-86-2436 CVC-54-2448 CVC-63-2448 CVC-74-2448 CVC-86-2448 CVC-54-2460 CVC-63-2460 CVC-74-2460 CVC-86-2460 CVC-54-2472 CVC-63-2472 CVC-74-2472 CVC-86-2472

list 225 229 236 241 226 231 276 279 300 283 287 300 264 273 278 287 300 304 282 292 300 309 283 289 300 324 331 332 338 345

zipper model # CZ-54-1836 CZ-63-1836 CZ-54-1848 CZ-63-1848 CZ-54-1860 CZ-63-1860 CZ-54-2148 CZ-63-2148 CZ-74-2148 CZ-54-2160 CZ-63-2160 CZ-74-2160 CZ-54-2424 CZ-63-2424 CZ-54-2436 CZ-63-2436 CZ-74-2436 CZ-86-2436 CZ-54-2448 CZ-63-2448 CZ-74-2448 CZ-86-2448 CZ-54-2460 CZ-63-2460 CZ-74-2460 CZ-86-2460 CZ-54-2472 CZ-63-2472 CZ-74-2472 CZ-86-2472

list 180 184 180 204 202 207 206 245 247 220 245 293 214 239 225 251 241 249 225 229 268 272 220 245 264 268 234 268 265 281

velcro model # CV-54-1836 CV-63-1836 CV-54-1848 CV-63-1848 CV-54-1860 CV-63-1860 CV-54-2148 CV-63-2148 CV-74-2148 CV-54-2160 CV-63-2160 CV-74-2160 CV-54-2424 CV-63-2424 CV-54-2436 CV-63-2436 CV-74-2436 CV-86-2436 CV-54-2448 CV-63-2448 CV-74-2448 CV-86-2448 CV-54-2460 CV-63-2460 CV-74-2460 CV-86-2460 CV-54-2472 CV-63-2472 CV-74-2472 CV-86-2472

list 180 204 180 204 202 208 245 251 231 220 232 264 195 233 205 245 257 262 206 251 268 273 220 255 264 274 234 249 288 296

Transparent** zipper model # CZ-54-1836-T CZ-63-1836-T CZ-54-1848-T CZ-63-1848-T CZ-54-1860-T CZ-63-1860-T CZ-54-2148-T CZ-63-2148-T CZ-74-2148-T CZ-54-2160-T CZ-63-2160-T CZ-74-2160-T CZ-54-2424-T CZ-63-2424-T CZ-54-2436-T CZ-63-2436-T CZ-74-2436-T CZ-86-2436-T CZ-54-2448-T CZ-63-2448-T CZ-74-2448-T CZ-86-2448-T CZ-54-2460-T CZ-63-2460-T CZ-74-2460-T CZ-86-2460-T CZ-54-2472-T CZ-63-2472-T CZ-74-2472-T CZ-86-2472-T

list 262 271 276 294 291 310 307 327 344 341 363 382 281 292 332 336 367 387 340 344 387 407 349 356 424 446 388 396 435 458

* White-Coated Nylon Covers are fire-retardant; ** Entire cover is transparent except for the seams.

Helps keep equipment clean on shelf carts and shelf trucks. 100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

31


SHELVING / RETAIL DISPLAY Catalog Section 1

Angled Shelf/ Visual Merchandising Carts see spec sheet

WEIGHT CAPACITY: EG01.44

Ideal for displaying POINT-OF-SALE INCLUDES: or SPECIAL SALE ITEMS.

• 300 lbs. (136.1 kg). • Four shelves adjust on 1˝ (25mm) vertical increments and the slope of each shelf. • Four posts. • Four 5˝ x 11⁄4˝ (127 x 32mm) standard polymer swivel casters, two with brake. • Additional caster sizes are available. Note:

FEATURES: • 72˝ (1829mm) height. • 31⁄4˝ (83mm) upturn at front • 11⁄4˝ (32mm) downturn at rear. • Shelves are reversible. • Units available in 3´, 4´, and 5´ (914, 1219 and 1524mm) lengths.

To order red or white epoxy finish, add suffix “R” (red) or “W” (white). Example: M1836R. Priced same as black epoxy. Additional shelves and wire dividers available as options.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

visual merchandising cart with optional shelf dividers

length weight in. mm lb. kg 24˝ 610 52 36˝ 914 60 48˝ 1219 68 60˝ 1524 76

23.6 27.2 30.8 34.5

cu EAGLEbrite® ft model # list 3.6 M1824Z-4 495 4.4 M1836Z-4 • 521 5.8 M1848Z-4 • 599 7.3 M1860Z-4 • 653

chrome model # M1824C-4 M1836C-4 M1848C-4 M1860C-4

list 509 536 612 662

black model # M1824BL-4 M1836BL-4 M1848BL-4 M1860BL-4

list 535 563 648 704

VALU-MASTER® model # list M1824V-4 535 M1836V-4 563 M1848V-4 648 M1860V-4 704

Valu-Gard® model # list M1824VG-4 535 M1836VG-4 563 M1848VG-4 648 M1860VG-4 704

Additional Angled Shelves for Angled Shelf / Visual Merchandising Carts - Hanger rails included. length weight in. mm lb. kg 24˝ 610 4 36˝ 914 9 48˝ 1219 12 60˝ 1524 17 Note:

1.8 4.1 5.5 7.7

cu EAGLEbrite® ft model # list 2.2 M1824Z 96 2.5 M1836Z 103 2.8 M1848Z 120 3.1 M1860Z 133

chrome model # M1824C M1836C M1848C M1860C

list 113 118 125 138

black model # M1824BL M1836BL M1848BL M1860BL

list 116 120 133 144

VALU-MASTER® model # list M1824V 116 M1836V 120 M1848V 133 M1860V 144

Valu-Gard® model # list M1824VG 116 M1836VG 120 M1848VG 133 M1860VG 144

If purchased as component piece for unit assembly, two 3-sided truss frames must be ordered (see page 33).

Shelf Dividers for Angled Shelf / Visual Merchandising Carts - 41⁄2˝ (114mm) height. length in. mm

weight lb. kg

18˝

1.0

457

0.5

cu chrome black ft model # list model # list 0.6 M18C 41 M18BL 46

VALU-MASTER® Valu-Gard® model # list model # list M18V 46 M18VG 46

Front-to-Back Hanger Rail for Angled Shelf / Visual Merchandising Carts length weight in. mm lb. kg 18˝

457 0.7

cu EAGLEbrite® chrome black ft model # list model # list model # 0.3 2.0 WR18-Z 21 WR18-C 24 WR18-BL

VALU-MASTER® Valu-Gard® list model # list model # list 25 WR18-V 25 WR18-VG 25

Side-to-Side Hanger Rails for Angled Shelf / Visual Merchandising Carts length weight in. mm lb. kg 24˝ 610 1.5 36˝ 914 1.9 48˝ 1219 2.1 60˝ 1524 2.5

32

0.7 0.9 1.0 1.1

cu EAGLEbrite® ft model # list 0.3 LR24-Z 22 0.6 LR36-Z 23 0.7 LR48-Z 25 0.8 LR60-Z 27

chrome black model # list model # LR24-C 27 LR24-BL LR36-C 32 LR36-BL LR48-C 40 LR48-BL LR60-C 45 LR60-BL

list 29 36 42 47

VALU-MASTER® model # list LR24-V 29 LR36-V 36 LR48-V 42 LR60-V 47

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

Valu-Gard® model # list LR24-VG 29 LR36-VG 36 LR48-VG 42 LR60-VG 47


SHELVING / RETAIL DISPLAY Catalog Section 1

...Merchandising Carts (continued) see spec sheet

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

EG01.44

three-sided truss frame 18˝ (457mm) front-to-back.

four-sided truss frame 18˝ (457mm) front-to-back.

3-Sided Truss Frames length wt. cu black in. mm lb. kg ft model # list 36˝ 914 3.5 1.6 2 3TF1836-Z 39 48˝ 1219 4.0 1.8 3 3TF1848-Z 43 60˝ 1524 4.5 2.0 4 3TF1860-Z 46

red model # list 3TF1836-C 69 3TF1848-C 76 3TF1860-C 84

white model # list 3TF1836-BL 69 3TF1848-BL 76 3TF1860-BL 84

Valu-Master® model # list 3TF1836-V 69 3TF1848-V 76 3TF1860-V 84

4-Sided Truss Frames Valu-Gard® model # list 3TF1836-VG 69 3TF1848-VG 76 3TF1860-VG 86

Aisle Merchandising Carts see product announcement

EG8129

48˝ (1219mm) Height, with Four Shelves length black in. mm model # 22˝ 559 MC1422-48-4BL 14˝ width 24˝ 610 MC1424-48-4BL (356mm) 30˝ 762 MC1430-48-4BL 36˝ 914 MC1436-48-4BL

red list model # 537 MC1422-48-4R 516 MC1424-48-4R 524 MC1430-48-4R 528 MC1436-48-4R

list 537 516 524 528

white model # MC1422-48-4W MC1424-48-4W MC1430-48-4W MC1436-48-4W

list 491 469 478 482

white model # MC1422-54-4W MC1424-54-4W MC1430-54-4W MC1436-54-4W

list 569 543 555 559

white model # MC1422-63-5W MC1424-63-5W MC1430-63-5W MC1436-63-5W

list 657 625 636 640

white model # MC1422-74-6W MC1424-74-6W MC1430-74-6W MC1436-74-6W

black model # 4TF1836-Z 4TF1848-Z 4TF1860-Z

list 54 58 62

red model # 4TF1836-C 4TF1848-C 4TF1860-C

list 58 64 72

white model # 4TF1836-BL 4TF1848-BL 4TF1860-BL

list 62 68 78

Valu-Master® Valu-Gard® model # list model # list 4TF1836-V 62 4TF1836-VG 62 4TF1848-V 68 4TF1848-VG 68 4TF1860-V 78 4TF1860-VG 78

• Top & bottom standard wire shelves. • Intermediate Add-A-Shelf® shelves, adjustable NEW on 1˝ (25mm) increments, can be sloped or flat. • Four posts with 23⁄8˝ (60mm)-diameter INCLUDES: decorative black swivel casters, all with brake. list 537 516 524 528

Valu-Master® model # list MC1422-48-4V 537 MC1424-48-4V 516 MC1430-48-4V 524 MC1436-48-4V 528

Valu-Gard® model # list MC1422-48-4VG 537 MC1424-48-4VG 516 MC1430-48-4VG 524 MC1436-48-4VG 528

list 491 469 478 482

Valu-Master® model # list MC1422-54-4V 491 MC1424-54-4V 469 MC1430-54-4V 478 MC1436-54-4V 482

Valu-Gard® model # list MC1422-54-4VG 491 MC1424-54-4VG 469 MC1430-54-4VG 478 MC1436-54-4VG 482

list 569 543 555 559

Valu-Master® model # list MC1422-63-5V 569 MC1424-63-5V 543 MC1430-63-5V 555 MC1436-63-5V 559

Valu-Gard® model # list MC1422-63-5VG 569 MC1424-63-5VG 543 MC1430-63-5VG 555 MC1436-63-5VG 559

list 657 625 636 640

Valu-Master® model # list MC1422-74-6V 657 MC1424-74-6V 625 MC1430-74-6V 636 MC1436-74-6V 640

Valu-Gard® model # list MC1422-74-6VG 657 MC1424-74-6VG 625 MC1430-74-6VG 636 MC1436-74-6VG 640

54˝ (1372mm) Height, with Four Shelves length black in. mm model # 22˝ 559 MC1422-54-4BL 14˝ width 24˝ 610 MC1424-54-4BL (356mm) 30˝ 762 MC1430-54-4BL 36˝ 914 MC1436-54-4BL

red list model # 491 MC1422-54-4R 469 MC1424-54-4R 478 MC1430-54-4R 482 MC1436-54-4R

63˝ (1600mm) Height, with Five Shelves length black in. mm model # 22˝ 559 MC1422-63-5BL 14˝ width 24˝ 610 MC1424-63-5BL (356mm) 30˝ 762 MC1430-63-5BL 36˝ 914 MC1436-63-5BL

red list model # 569 MC1422-63-5R 543 MC1424-63-5R 555 MC1430-63-5R 559 MC1436-63-5R

four-shelf cart

Ideal for POINT-OF-PURCHASE displays or SEASONAL PROMOTIONS.

74˝ (1880mm) Height, with Six Shelves length black in. mm model # 22˝ 559 MC1422-74-6BL 14˝ width 24˝ 610 MC1424-74-6BL (356mm) 30˝ 762 MC1430-74-6BL 36˝ 914 MC1436-74-6BL

red list model # 657 MC1422-74-6R 625 MC1424-74-6R 636 MC1430-74-6R 640 MC1436-74-6R

(Patent #5,390,803)

Patented QuadTruss® Design makes shelves up to 25% stronger and provides a retaining ledge for increased strength and product retention.

Additional Add-A-Shelf® Adjustable Shelves for Aisle Merchandising Carts - Patent # 5,884,567 Add-A-Shelf ® Shelves Add-A-Shelf ® Reverse Mat Shelves length weight cu black red in. mm lb. kg ft model # list model # list 22˝ 559 6 2.7 0.5 A1422BL 75 A1422R 75 14˝ 24˝ 610 6 2.7 0.5 A1424BL 69 A1424R 69 (356mm) 30˝ 762 7 3.2 0.5 A1430BL 71 A1430R 71 width 36˝ 914 8 3.6 0.5 A1436BL• 71 A1436R 71

white model # list A1422W 75 A1424W 69 A1430W 71 A1436W 71

Valu-Master® Valu-Gard® model # list model # list A1422V 75 A1422VG 75 A1424V 69 A1424VG 69 A1430V 71 A1430VG 71 A1436V 71 A1436VG 71

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

black model # list D1422BL 79 D1424BL 79 D1430BL 73 D1436BL 73

red model # D1422R D1424R D1430R D1436R

list 79 79 73 73

white model # list D1422W 79 D1424W 79 D1430W 73 D1436W 73

Valu-Master® Valu-Gard® model # list model # list D1422V 79 D1422VG 79 D1424V 79 D1424VG 79 D1430V 73 D1430VG 73 D1436V 73 D1436VG 73

33


SHELVING / RETAIL DISPLAY Catalog Section 1

Dolly Trucks see spec sheet

EG01.08 FEATURES:

INCLUDES:

• Fast assembly without tools. • Open wire construction. • Shipped knocked-down. • • • • •

Four shelves. Four posts. Plastic split sleeves. Four designated 5˝ x 11⁄4˝ (127 x 32mm) casters. Aluminum truck dolly with wraparound bumper. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Patented QuadTruss® Design (Patent #5,390,803)

shelf dimensions width x length in. mm

407⁄8˝ length

weight lbs. kg

cu ft

18˝ x 36˝

457 x 914

72

32.7

4.2

18˝ x 48˝

457 x 1219 86

39.0

5.6

18˝ x 36˝

457 x 914

100

45.4

6.8

21˝ x 36˝

533 x 914

82

37.2

4.8

21˝ x 48˝

533 x 1219 98

44.5

6.4

21˝ x 60˝

533 x 1524 114

51.7

7.9

24˝ x 36˝

610 x 914

40.8

5.6

24˝ x 48˝

610 x 1219 112

50.8

7.2

24˝ x 60˝

610 x 1524 134

60.8

8.9

(1038mm)

233⁄4˝ width (603mm)

527⁄8˝ length (1343mm)

647⁄8˝ length (1648mm)

407⁄8˝ length (1038mm)

69˝ 263⁄4˝ height width (1753mm) (680mm)

527⁄8˝ length (1343mm)

647⁄8˝ length (1648mm)

407⁄8˝ length

90

(1038mm)

293⁄4˝ width (756mm)

527⁄8˝ length (1343mm)

647⁄8˝ length (1648mm)

34

caster type

wheel tread

swivel swivel swivel/brake swivel/brake swivel swivel swivel/brake swivel/brake swivel swivel swivel/brake swivel/brake swivel swivel swivel/brake swivel/brake swivel swivel swivel/brake swivel/brake swivel swivel swivel/brake swivel/brake swivel swivel swivel/brake swivel/brake swivel swivel swivel/brake swivel/brake swivel swivel swivel/brake swivel/brake

resilient poly resilient poly resilient poly resilient poly resilient poly resilient poly resilient poly resilient poly resilient poly resilient poly resilient poly resilient poly resilient poly resilient poly resilient poly resilient poly resilient poly resilient poly

makes shelves up to 25% stronger and provides a retaining ledge for increased strength and product retention.

with EAGLEbrite® shelf unit model # list DT1836-ZS 1013 DT1836-ZSP 1013 DT1836-ZSB 1022 DT1836-ZSBP 1020 DT1848-ZS 1091 DT1848-ZSP 1091 DT1848-ZSB 1102 DT1848-ZSBP 1100 DT1860-ZS 1201 DT1860-ZSP 1201 DT1860-ZSB 1214 DT1860-ZSBP 1208 DT2136-ZS 1067 DT2136-ZSP 1067 DT2136-ZSB 1079 DT2136-ZSBP 1076 DT2148-ZS 1144 DT2148-ZSP 1144 DT2148-ZSB 1155 DT2148-ZSBP 1152 DT2160-ZS 1268 DT2160-ZSP 1268 DT2160-ZSB 1280 DT2160-ZSBP 1277 DT2436-ZS 1092 DT2436-ZSP 1092 DT2436-ZSB 1104 DT2436-ZSBP 1101 DT2448-ZS 1198 DT2448-ZSP 1198 DT2448-ZSB 1207 DT2448-ZSBP 1205 DT2460-ZS 1335 DT2460-ZSP 1335 DT2460-ZSB 1344 DT2460-ZSBP 1342

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

with chrome shelf unit model # list DT1836-CS 1022 DT1836-CSP 1022 DT1836-CSB 1034 DT1836-CSBP 1029 DT1848-CS 1119 DT1848-CSP 1119 DT1848-CSB 1128 DT1848-CSBP 1126 DT1860-CS 1228 DT1860-CSP 1228 DT1860-CSB 1239 DT1860-CSBP 1237 DT2136-CS 1106 DT2136-CSP 1106 DT2136-CSB 1117 DT2136-CSBP 1114 DT2148-CS 1187 DT2148-CSP 1187 DT2148-CSB 1198 DT2148-CSBP 1195 DT2160-CS 1297 DT2160-CSP 1297 DT2160-CSB 1306 DT2160-CSBP 1304 DT2436-CS 1125 DT2436-CSP 1125 DT2436-CSB 1135 DT2436-CSBP 1133 DT2448-CS 1240 DT2448-CSP 1240 DT2448-CSB 1253 DT2448-CSBP 1249 DT2460-CS 1367 DT2460-CSP 1367 DT2460-CSB 1378 DT2460-CSBP 1375


SHELVING / RETAIL DISPLAY Catalog Section 1

Garment Racks see spec sheet

• • • • •

EG01.28

Four chrome post with adjustable feet. Two wire chrome plated shelves. 74˝ (1880mm) height on stationary units. 80˝ (3032mm) height on mobile units. Mobile racks four 5˝ polyurethane tread casters, with rubber donut bumper.

INCLUDES: (Patent #5,390,803)

Freight class is 70.0.

®

Patented QuadTruss Design

Convenient storage of coats, uniforms, or garments.

18˝ width (457mm)

length in. mm

weight lbs. kg

cu ft

description

36˝ 36˝ 48˝ 48˝ 60˝ 60˝

48 64 52 72 58 82

2.2 2.2 2.6 2.6 3.2 3.2

2 wire shelves same, plus 1 solid shelf 2 wire shelves same, plus 1 solid shelf 2 wire shelves same, plus 1 solid shelf

914 914 1219 1219 1524 1524

21.8 29.0 23.6 32.7 26.3 37.2

Optional Wire Shelves length in. mm

18˝ width (457mm)

36˝ 48˝ 60˝

914 1219 1524

(•) MTS (made to stock) / ( ) MTO (made to order)

makes shelves up to 25% stronger and provides a retaining ledge for increased strength and product retention.

model # URS1836C

STATIONARY model # list GR1836C 273 GRS1836C 377 GR1848C 296 GRS1848C 414 GR1860C 333 GRS1860C 475

MOBILE model # UR1836C URS1836C UR1848C URS1848C UR1860C URS1860C

list 440 578 472 634 509 725

Replacement Coat Hanger Tubes

weight lbs. kg 9 12 17

4.1 5.5 7.7

cu ft

model # list 1836C • 68 1848C • 81 1860C • 96

0.7 0.9 1.2

Optional Hangers description

weight lbs. kg

cu ft

open loop hanger closed loop hanger

0.4 0.4

0.3 0.3

0.2 0.2

chrome model # list OLH-C • 12 CLH-C 12

length in. mm

weight lbs. kg

cu ft

24˝ 30˝ 36˝ 42˝ 48˝ 54˝ 60˝

1.5 1.7 2.2 2.7 3.2 3.5 3.8

0.4 0.5 0.5 5.5 0.6 6.5 0.7

610 762 914 1067 1219 1372 1524

Platforms see spec sheet

EG01.13

FEATURES:

0.7 0.8 1.0 1.2 1.5 1.6 1.7

model # list CH24 61 CH30 62 CH36 67 CH42 72 CH48 • 77 CH54 78 CH60 81

• Open-wire construction for improved air circulation, minimizing dust. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

600 lbs. weight capacity

Patented QuadTruss® Design (Patent #5,390,803)

18˝ width (457mm)

14˝ height (356mm)

21˝ width (533mm)

24˝ width (610mm)

length in. mm

weight lbs. kg

cu ft

24˝ 30˝ 36˝ 24˝ 30˝ 36˝ 24˝ 30˝ 36˝

10 11 13 12 13 14 13 15 17

0.7 0.7 0.7 0.7 0.7 0.8 0.8 0.8 0.8

610 762 914 610 762 914 610 762 914

4.5 5.0 5.9 5.4 5.9 6.4 5.9 6.8 7.7

EAGLEbrite® model # list PF1824-Z • 125 PF1830-Z • 127 PF1836-Z • 131 PF2124-Z • 132 PF2130-Z • 134 PF2136-Z • 137 PF2424-Z • 137 PF2430-Z • 139 PF2436-Z • 142

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

makes shelves up to 25% stronger and provides a retaining ledge for increased strength and product retention.

chrome model # PF1824-C • PF1830-C • PF1836-C • PF2124-C • PF2130-C • PF2136-C • PF2424-C • PF2430-C • PF2436-C •

list 126 129 132 138 141 143 142 144 147

EAGLEgard® model # list PF1824-E • 149 PF1830-E • 152 PF1836-E • 155 PF2124-E • 161 PF2130-E • 163 PF2136-E • 165 PF2424-E • 168 PF2430-E • 171 PF2436-E • 174

35


SHELVING / RETAIL DISPLAY Catalog Section 1

Dunnage Shelves see spec sheet

EG01.13 FEATURES

• Four-sided frame with center supports. • Removable heavy duty 5⁄16˝ (8mm)-diameter wire mat assembly. Note:

Freight class is 70.0.

Improves your system’s weight-bearing capacity.

18˝ width (457mm)

21˝ width (533mm)

24˝ width (610mm)

length in. mm

weight lbs. kg

cu ft

24˝ 30˝ 36˝ 48˝ 60˝ 24˝ 30˝ 36˝ 48˝ 60˝ 24˝ 30˝ 36˝ 48˝ 60˝

14 18 21 28 33 15 19 22 28 34 16 20 24 30 37

0.7 1.2 1.6 1.9 3.0 0.7 0.9 2.1 2.8 4.4 0.8 2.8 2.1 2.8 1.5

610 762 914 1219 1524 610 762 914 1219 1524 610 762 914 1219 1524

6.4 8.2 9.5 12.7 15.0 6.8 8.6 10.0 12.7 15.4 7.3 9.0 10.9 13.6 16.8

chrome model # DS1824-C DS1830-C DS1836-C DS1848-C DS1860-C DS2124-C DS2130-C DS2136-C DS2148-C DS2160-C DS2424-C DS2430-C DS2436-C DS2448-C DS2460-C

Dunnage Racks see spec sheet

EG01.13 WEIGHT CAPACITY:

All weights and cubic feet are approximate.

(•) MTS (made to stock) / ( ) MTO (made to order)

list 154 169 176 204 232 162 174 182 212 243 166 176 187 215 256

EAGLEgard® model # list DS1824-E 199 DS1830-E 206 DS1836-E 212 DS1848-E • 244 DS1860-E • 279 DS2124-E 203 DS2130-E 214 DS2136-E 225 DS2148-E 247 DS2160-E 287 DS2424-E 215 DS2430-E 222 DS2436-E 229 DS2448-E • 262 DS2460-E • 308

stainless steel model # list n/a n/a n/a n/a DS1836-S 571 DS1848-S 694 DS1860-S 815 n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a DS2436-S 623 DS2448-S 751 DS2460-S 900

• Up to 36˝ long: 1600 lbs. (635 kg). • 48˝ long: 1300 lbs. (590 kg). • 60˝ long: 1000 lbs. (454 kg). - static load equally distributed. Note:

All weights and cubic feet are approximate.

Freight class is 70.0.

Snag-free wire surface.

Store large items off the floor!

18˝ width (457mm)

141⁄4˝ overall height

21˝ width (533mm)

(362mm)

24˝ width (610mm)

36

length in. mm

weight lbs. kg

cu ft

24˝ 30˝ 36˝ 48˝ 60˝ 24˝ 30˝ 36˝ 48˝ 60˝ 24˝ 30˝ 36˝ 48˝ 60˝

21 24 31 37 43 24 27 33 39 45 27 30 35 41 47

0.5 1.0 1.6 2.2 3.0 0.8 2.0 2.0 2.9 3.3 1.4 1.8 2.1 2.8 3.5

610 762 914 1219 1524 610 762 914 1219 1524 610 762 914 1219 1524

9.5 10.9 14.1 16.8 19.5 10.9 12.2 15.0 17.6 20.4 12.2 13.6 15.9 18.6 21.3

chrome model # DR1824-C DR1830-C DR1836-C DR1848-C DR1860-C DR2124-C DR2130-C DR2136-C DR2148-C DR2160-C DR2424-C DR2430-C DR2436-C • DR2448-C • DR2460-C

(•) MTS (made to stock) / ( ) MTO (made to order)

list 277 293 300 332 371 283 299 309 343 392 291 302 319 352 408

EAGLEgard® model # list DR1824-E 344 DR1830-E 358 DR1836-E 364 DR1848-E • 400 DR1860-E 448 DR2124-E 352 DR2130-E 366 DR2136-E 380 DR2148-E 408 DR2160-E 463 DR2424-E 364 DR2430-E 374 DR2436-E • 383 DR2448-E • 422 DR2460-E 487

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

stainless steel model # list n/a n/a n/a n/a DR1836-S 747 DR1848-S 962 n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a DR2436-S 828 DR2448-S 1054 n/a n/a


SHELVING / RETAIL DISPLAY Catalog Section 1

Mobile Dunnage Racks see spec sheet

EG01.13

WEIGHT CAPACITY:

Easy to maneuver!

INCLUDES:

• 800 lbs. (363 kg). - equally distributed on the top surface. • Four 5˝ swivel polyurethane tread casters, two with brakes. • 3-sided frame with 1˝ (25mm)-square tubing. • Snag-free wire surface. Note:

All weights and cubic feet are approximate.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

18˝ width (457mm)

16˝ overall 21˝ width height (533mm) (406mm)

24˝ width (610mm)

length in. mm

weight lbs. kg

cu ft

24˝ 30˝ 36˝ 48˝ 60˝ 24˝ 30˝ 36˝ 48˝ 60˝ 24˝ 30˝ 36˝ 48˝ 60˝

33 36 43 49 55 36 39 45 51 57 40 42 47 53 63

1.0 2.3 2.3 3.0 4.5 3.1 3.3 3.0 4.0 5.0 3.0 3.0 3.0 4.0 5.0

610 762 914 1219 1524 610 762 914 1219 1524 610 762 914 1219 1524

15.0 16.3 19.5 22.2 24.9 16.3 17.6 20.4 23.1 25.9 18.1 19.1 21.3 24.0 21.3

chrome model # MDR1824-C MDR1830-C MDR1836-C MDR1848-C MDR1860-C MDR2124-C MDR2130-C MDR2136-C MDR2148-C MDR2160-C MDR2424-C MDR2430-C MDR2436-C MDR2448-C MDR2460-C

Polymer Dunnage Racks see spec sheet

FEATURES: EG01.17

list 423 442 447 480 518 429 446 457 491 537 438 449 463 496 555

EAGLEgard® model # list MDR1824-E 492 MDR1830-E 503 MDR1836-E 512 MDR1848-E 548 MDR1860-E 595 MDR2124-E 496 MDR2130-E 515 MDR2136-E 526 MDR2148-E 555 MDR2160-E 612 MDR2424-E 512 MDR2430-E 521 MDR2436-E 531 MDR2448-E 569 MDR2460-E 634

stainless steel model # list n/a n/a n/a n/a MDR1836-S 1209 MDR1848-S 1284 n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a MDR2436-S 1158 MDR2448-S 1368 n/a n/a

• No assembly required. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Durable polyethylene construction prevents corrosion and rust. width length weight cubic capacity in. mm in. mm lbs. kg feet lbs. kg color model # 22˝ 559 36˝ 914 18 8.2 5.5 2000 907 black PD3622 12˝ 22˝ 559 48˝ 1219 24 10.9 7.4 3000 1361 black PD4822 height 22˝ 559 60˝ 1524 28 12.7 9.2 3000 1361 black PD6022 (305mm) 36˝ 914 48˝ 1219 35 15.9 12.0 3500 1588 black PD4836

Starter Units with Dunnage Shelf see product announcement

EG8125

Heavy duty dunnage shelf improves the units overall weight-bearing capacity.

FEATURES:

24˝ x 48˝

• Tapered split sleeves create a positive lock that becomes stronger as the load increases. • 74˝ posts numbered in increments of 1˝ (25mm) to ensure fast and level assembly. Freight class is 70.0.

Stationary width x length in. mm

list 258 312 357 360

(•) MTS (made to stock) / ( ) MTO (made to order)

zinc model #

610 x 1219 DS4-P74-2448Z

chrome list model # 735 DS4-P74-2448C

EAGLEgard® list model # list 843 DS4-P74-2448E 862

(Patent #5,390,803)

Mobile width x length in. mm

zinc model #

24˝ x 48˝ 610 x 1219 DS4-CP74-2448Z

EAGLEgard® list model # list model # list 842 DS4-CP74-2448C 952 DS4-CP74-2448E 969

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

chrome

Note: Mobile models feature 5˝ resilient casters with bumpers.

37


SHELVING / RETAIL DISPLAY Catalog Section 1

Aluminum Dunnage Racks see spec sheet

EG01.17

FEATURES:

• 11⁄2˝ (38mm) square tubing. • Plastic feet. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

20˝ width (508mm)

24˝ width (610mm)

length weight in. mm lbs. kg

cubic feet

36˝ 48˝ 60˝ 36˝ 48˝ 60˝

6.8 8.9 11.0 8.0 10.5 13.1

914 1219 1524 914 1219 1524

10 14 18 12 16 20

4.5 6.4 8.2 5.4 7.3 9.1

Nesting Dunnage Racks

weight RACKS WITH capacity number 8˝ (203mm) HEIGHT lbs. kg of lats model # list 2000 907 4 WDR203608-A • 234 2000 907 4 WDR204808-A • 272 1500 680 4 WDR206008-A • 306 2000 907 5 WDR243608-A • 264 2000 907 5 WDR244808-A • 297 1500 680 5 WDR246008-A • 342

FEATURES:

see spec sheet

RACKS WITH 12˝ (305mm) HEIGHT model # list WDR203612-A • 234 WDR204812-A • 272 WDR206012-A • 306 WDR243612-A • 264 WDR244812-A • 297 WDR246012-A • 342

• All-aluminum construction.

EG01.17

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Racks are stackable, saving space when not in use. length in. mm

18˝ width 2,700 to 3,200 lb. (1225 to 1452 kg) weight capacity.

(457mm)

12˝ height

20˝ width (508mm)

(305mm)

24˝ width (610mm)

24˝ 36˝ 48˝ 24˝ 36˝ 48˝ 24˝ 36˝ 48˝

610 914 1219 610 914 1219 610 914 1219

weight lbs. kg 8 10 12 8 10 12 9 11 14

3.6 4.5 5.4 3.6 4.5 5.4 4.1 5.0 6.4

Aluminum Truck Dollies see spec sheet EG01.03B INCLUDES:

weight capacity lbs. kg

cubic feet 3.0 4.5 6.0 3.4 5.1 6.7 4.0 6.0 8.0

3200 3200 2700 3200 3200 2700 3200 3200 2700

1452 1452 1225 1452 1452 1225 1452 1452 1225

model # NDR182412-A NDR183612-A NDR184812-A NDR202412-A NDR203612-A NDR204812-A NDR242412-A NDR243612-A NDR244812-A

list 224 258 288 224 258 288 265 295 342

• Four designated 5˝ x 11⁄4˝ (127 x 32mm) casters with poly tread. • Wraparound bumpers. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

293⁄4˝ width (756mm)

38

length in. mm

weight lbs. kg

527⁄8˝ 527⁄8˝ 647⁄8˝ 647⁄8˝

41 44 48 50

1343 1343 1648 1648

18.6 20.0 21.8 22.7

cubic feet

caster type

6.3 6.3 7.6 7.6

swivel swivel/brake swivel swivel/brake

caster load rate (each) lbs. kg model # 300 136.1 TD2448-SP 300 136.1 TD2448-BSP 300 136.1 TD2460-SP 300 136.1 TD2460-BSP

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

list 986 1144 1145 1302


SHELVING / RETAIL DISPLAY Catalog Section 1

Dolly Frames with Wraparound Bumper see spec sheet EG01.03B ORDERING:

• If ordering casters list dolly frame and caster model numbers separately. • Holes are prepunched for use with plate casters on page 12.

dolly frames with wraparound bumper

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Aluminum in.

233⁄4˝ width (603mm)

263⁄4˝ width (680mm)

293⁄4˝ width (756mm)

length mm

407⁄8˝ 467⁄8˝ 527⁄8˝ 647⁄8˝ 767⁄8˝ 407⁄8˝ 467⁄8˝ 527⁄8˝ 647⁄8˝ 767⁄8˝ 407⁄8˝ 467⁄8˝ 527⁄8˝ 647⁄8˝ 767⁄8˝

1038 1191 1343 1648 1953 1038 1191 1343 1648 1953 1038 1191 1343 1648 1953

weight lbs. kg

cu ft

14 16 18 21 23 17 19 21 23 25 21 26 29 31 39

1.6 1.9 2.5 3.2 2.9 1.8 2.1 2.4 2.9 3.5 2.1 2.4 3.9 4.2 4.5

6.4 7.3 8.2 9.6 10.4 7.7 8.6 9.6 10.4 11.3 9.6 11.8 13.2 14.1 17.7

model # DF1836-A DF1842-A DF1848-A DF1860-A DF1872-A DF2136-A DF2142-A DF2148-A DF2160-A DF2172-A DF2436-A DF2442-A DF2448-A DF2460-A • DF2472-A

Chrome Plated Steel list 360 382 391 434 500 382 397 408 442 469 386 400 419 452 531

weight lbs. kg

cu ft

16 18 20 23 25 19 21 24 23 28 23 29 32 34 42

1.6 1.9 2.5 3.2 2.9 1.8 2.1 2.4 2.9 3.5 2.1 2.4 3.9 4.2 4.5

7.3 8.2 9.1 10.4 11.3 8.6 9.6 10.9 11.8 12.7 10.4 13.2 14.5 15.4 19.1

Plastic Label Holders see spec sheet EG01.03D FEATURES:

model # DF1836-C DF1842-C DF1848-C DF1860-C DF1872-C DF2136-C DF2142-C DF2148-C DF2160-C DF2172-C DF2436-C DF2442-C DF2448-C DF2460-C DF2472-C

list 637 658 679 721 767 660 683 708 748 859 658 676 704 748 852

• Snaps onto shelf edge. • Provides easy identification of shelf contents or section. • Holds 1˝ to 11⁄4˝ (25 to 32mm) high labels. Freight class is 70.0.

black plastic label holder

gray plastic label holder

length in. mm 3˝ 13˝ 19˝ 25˝ 31˝ 37˝ 43˝ 45˝ 55˝ 67˝

76 330 483 635 787 940 1092 1143 1397 1702

fits shelf size in. mm all 18˝ 24˝ 30˝ 36˝ 42˝ 48˝ 48˝ 60˝ 72˝

all 457 610 762 914 1067 1219 1219 1524 1829

gray model # A204331* A206196 A206197 A206198 A206199 A223747 A206200 A212494 A206201 n/a

list 3 7 8 9 12 13 15 16 17 n/a

(•) MTS (made to stock) / ( ) MTO (made to order)

clear plastic label holder

black model # A206216 * A206217 A206218 A206219 A206220 A223748 A206221 A225208 A206222 n/a

list 3 7 8 9 12 13 15 16 17 n/a

clear model # A208746 A208747 A208749 A208750 A208751 • A223749 A208752 A217621 A208753 A222144

list 3 7 8 9 12 13 15 16 17 20

Service for over 60 years.

Quality... Value... Reliability!

* Actual length: 31⁄4˝ (83mm)

Wire Basket Shelf see product announcement EG01.03E

• Chrome-plated. • For use with standard shelving posts. FEATURES: • 41⁄4˝ (107mm) depth.

length weight chrome in mm lbs. kg model # list 36˝ 914 10 4.5 WBS1836C 101 18˝ width

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

(457mm)

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

39


SHELVING / RETAIL DISPLAY Catalog Section 1

Security Modules see product announcement

EG8199 INCLUDES:

• • • •

End panels. Rear panel. Door(s). Fits in between two wire shelves spaced 20˝ apart.

Note:

Shelving units sold separately—see pages 15 and 17.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

shown with hinged door (shown mounted to shelf unit sold separately)

shown with flip-up door (shown mounted to shelf unit sold separately)

Converts portion of shelf unit into a lockable enclosed security unit, adding versatility to shelf unit. More than one module can be added to unit, depending on unit’s overall height.

Hinged Doors

18˝ width (457mm)

21˝ width (533mm)

24˝ width (610mm)

length in. mm

weight lb. kg

30˝ 36˝ 48˝ 60˝ 30˝ 36˝ 48˝ 60˝ 30˝ 36˝ 48˝ 60˝

20 23 27 32 21 24 29 33 24 27 31 35

762 914 1219 1524 762 914 1219 1524 762 914 1219 1524

9.0 10.4 12.2 14.5 9.5 16.9 13.2 15.0 16.9 12.2 14.1 15.9

EAGLEbrite® zinc model # list SECM1830Z 366 SECM1836Z 373 SECM1848Z 398 SECM1860Z 402 SECM2130Z 372 SECM2136Z 381 SECM2148Z 407 SECM2160Z 414 SECM2430Z 378 SECM2436Z 391 SECM2448Z 417 SECM2460Z 442

chrome model # SECM1830C SECM1836C SECM1848C SECM1860C SECM2130C SECM2136C SECM2148C SECM2160C SECM2430C SECM2436C SECM2448C SECM2460C

EAGLEbrite® zinc model # list SECM1830FZ 431 SECM1836FZ 436 SECM1848FZ 456 SECM1860FZ 461 SECM2130FZ 435 SECM2136FZ 442 SECM2148FZ 464 SECM2160FZ 472 SECM2430FZ 441 SECM2436FZ 452 SECM2448FZ 473 SECM2460FZ 494

chrome model # SECM1830FC SECM1836FC SECM1848FC SECM1860FC SECM2130FC SECM2136FC SECM2148FC SECM2160FC SECM2430FC SECM2436FC SECM2448FC SECM2460FC

list 480 486 578 515 485 494 587 526 492 526 597 666

EAGLEgard® stainless steel model # list model # list SECM1830E 504 SECM1830S 1166 SECM1836E 513 SECM1836S 1189 SECM1848E 608 SECM1848S 1273 SECM1860E 541 SECM1860S 1277 SECM2130E 512 SECM2130S 1185 SECM2136E 519 SECM2136S 1211 SECM2148E 618 SECM2148S 1302 SECM2160E 555 SECM2160S 1314 SECM2430E 517 SECM2430S 1203 SECM2436E 554 SECM2436S 1246 SECM2448E 628 SECM2448S 1332 SECM2460E 702 SECM2460S 1417

list 514 519 588 544 518 525 597 555 524 551 604 660

EAGLEgard® stainless steel model # list model # list SECM1830FE 540 SECM1830FS 1362 SECM1836FE 546 SECM1836FS 1382 SECM1848FE 620 SECM1848FS 1449 SECM1860FE 573 SECM1860FS 1459 SECM2130FE 545 SECM2130FS 1379 SECM2136FE 554 SECM2136FS 1401 SECM2148FE 628 SECM2148FS 1475 SECM2160FE 583 SECM2160FS 1492 SECM2430FE 551 SECM2430FS 1395 SECM2436FE 580 SECM2436FS 1431 SECM2448FE 636 SECM2448FS 1501 SECM2460FE 694 SECM2460FS 1572

Flip-Up Door

18˝ width (457mm)

21˝ width (533mm)

24˝ width (610mm)

40

length in. mm

weight lb. kg

30˝ 36˝ 48˝ 60˝ 30˝ 36˝ 48˝ 60˝ 30˝ 36˝ 48˝ 60˝

24 29 34 39 26 30 35 40 28 32 38 43

762 914 1219 1524 762 914 1219 1524 762 914 1219 1524

16.9 13.2 15.4 17.6 11.8 13.6 15.9 18.1 12.7 14.5 17.2 19.5

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


SHELVING / RETAIL DISPLAY Catalog Section 1

Safely store and transport costly materials and items subject to pilferage.

Full-Size Stationary Security Units see spec sheet

EG01.22

FEATURES:

• 2˝ x 2˝ (51 x 51mm) mesh. • Shipped knocked-down.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order) Note:

additional center shelves (see page 42)

See page 31 for optional cart covers available.

(Patent #5,390,803)

Patented QuadTruss® Design makes shelves up to 25% stronger and provides a retaining ledge for increased strength and product retention.

length

17 ⁄4˝ width 1

(438mm)

67˝ overall height (1702mm)

271⁄4˝ width (692mm)

331⁄4˝ width (845mm)

in.

mm

weight lbs. kg

cu ft

331⁄4˝ 391⁄4˝ 511⁄4˝ 631⁄4˝ 331⁄4˝ 391⁄4˝ 511⁄4˝ 631⁄4˝ 331⁄4˝ 391⁄4˝ 511⁄4˝ 631⁄4˝

845 997 1302 1607 845 997 1302 1607 845 997 1302 1607

114 123 141 159 123 145 171 197 145 163 181 207

5 5 9 10 9 9 13 15 15 13 15 18

51.7 55.8 64.0 72.1 55.8 65.8 77.6 89.4 65.8 73.9 82.1 93.9

chrome model # list SC1430 1093 SC1436 • 1214 SC1448 • 1509 SC1460 1797 SC2430 1118 SC2436 • 1242 SC2448 • 1541 SC2460 • 1849 SC3030 1634 SC3036 1815 SC3048 2260 SC3060 • 2433

Full-Size Mobile Security Units see spec sheet

EG01.22 FEATURES:

EAGLEgard® model # list SC1430E 1308 SC1436E 1454 SC1448E 1768 SC1460E 2022 SC2430E 1426 SC2436E • 1585 SC2448E • 1972 SC2460E 2143 SC3030E 1863 SC3036E 2071 SC3048E 2597 SC3060E 2794

stainless steel model # list SC1430S 3245 SC1436S 3606 SC1448S 4359 SC1460S 4479 SC2430S 3261 SC2436S 3623 SC2448S 4418 SC2460S 4572 SC3030S 4591 SC3036S 5101 SC3048S 6224 SC3060S 6483

• Four swivel 5˝ x 11⁄4˝ (127 x 32mm) stem casters with polyurethane tread–two with brake. • 2˝ x 2˝ (51 x 51mm) mesh. • Shipped knocked-down. Note:

additional center shelves (see page 42) (Patent #5,390,803)

All stainless steel mobile security units come with stainless steel casters with polyurethane tread. See page 11 for other stem casters available. See page 31 for optional cart covers available.

®

Patented QuadTruss Design makes shelves up to 25% stronger and provides a retaining ledge for increased strength and product retention.

length

27 ⁄4˝ width 1

(692mm)

69˝ overall height (1753mm)

331⁄4˝ width (845mm)

in.

mm

weight lbs. kg

331⁄4˝ 391⁄4˝ 511⁄4˝ 631⁄4˝ 331⁄4˝ 391⁄4˝ 511⁄4˝ 631⁄4˝

845 997 1302 1607 845 997 1302 1607

135 161 185 204 161 179 203 221

61.2 73.0 83.9 92.5 73.0 87.2 92.1 100.2

cu ft 9 9 13 15 15 13 15 18

chrome model # list CSC2430 1334 CSC2436 • 1482 CSC2448 • 1784 CSC2460 • 2099 CSC3030 1917 CSC3036 2129 CSC3048 2571 CSC3060 • 2777

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

EAGLEgard® model # list CSC2430E 1633 CSC2436E • 1814 CSC2448E • 2201 CSC2460E 2372 CSC3030E 2137 CSC3036E 2375 CSC3048E • 2884 CSC3060E 3104

stainless steel model # list CSC2430S 3261 CSC2436S 3623 CSC2448S 4418 CSC2460S 4572 CSC3030S 4591 CSC3036S 5101 CSC3048S 6224 CSC3060S 6483

41


SHELVING / RETAIL DISPLAY Catalog Section 1

Full-Size Dolly Truck Security Units see spec sheet

EG01.22 INCLUDES:

• Dolly with wraparound bumper. • 2˝ x 2˝ (51x 51mm) mesh. • Four swivel 5˝ x 11⁄4˝ (127 x 32mm) poly plate casters, two with brakes. • Shipped knocked down. Note:

optional center shelves

See page 12 for optional plate casters. See page 31 for optional cart covers available.

(Patent #5,390,803)

Patented QuadTruss® Design makes shelves up to 25% stronger and provides a retaining ledge for increased strength and product retention.

in.

347⁄8˝ 407⁄8˝ 527⁄8˝ 647⁄8˝

69˝ overall height 293⁄4˝ width (1753mm)

length mm

(756mm)

886 1038 1343 1648

weight lbs. kg

cu ft

161 177 214 245

7.3 10.7 18.5 22.9

73.0 80.3 97.1 111.1

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

chrome shelf unit with aluminum dolly model # list DTSC2430 1692 DTSC2436 1880 DTSC2448 2208 DTSC2460 2544

EAGLEgard® shelf unit with aluminum dolly model # list DTSC2430E 2372 DTSC2436E 2635 DTSC2448E 3137 DTSC2460E 3459

stainless steel shelf unit with stainless steel dolly model # list DTSC2430S 4417 DTSC2436S 4907 DTSC2448S 5824 DTSC2460S 5979

Optional Posts for Full-Size Security Units post height in. mm

weight lbs. kg

cu ft

74˝ 86˝

4 5

0.8 0.5

1880 2184

1.8 2.3

chrome model # list SP74-CS 29 SP86-CS 36

EAGLEgard® stainless steel model # list model # list SP74-ES 28 SP74-SS 92 SP86-ES 35 SP86-SS 108

Optional Shelves for Full-Size Security Units Wire Shelves

Optional Quad-Adjust® Shelves

Must be installed when assembling unit. length weight in. mm lbs. kg

cu ft

chrome model # list 1430C • 57 1436C • 63 1448C • 75 1460C • 84 2430C • 81 2436C • 84 2448C • 102 2460C • 120 3030C 109 3036C • 112 3048C • 131 3060C • 176

®

EAGLEgard model # list 1430E • 71 1436E • 74 1448E • 89 1460E • 98 2430E • 99 2436E • 102 2448E • 125 2460E • 147 3030E 133 3036E • 135 3048E • 157 3060E • 205

stainless steel model # list 1430S 201 1436S • 203 1448S • 248 1460S • 318 2430S • 308 2436S • 312 2448S • 375 2460S • 461 3030S 377 3036S • 400 3048S • 466 3060S • 536

30˝ 762 7 3.2 0.5 36˝ 914 8 3.6 0.5 48˝ 1219 10 4.5 0.7 (356mm) 60˝ 1524 14 6.4 0.9 30˝ 762 11 5.0 0.8 24˝ 36˝ 914 13 5.9 0.8 width 48˝ 1219 16 7.3 1.2 (610mm) 60˝ 1524 21 9.5 1.5 30˝ 762 16 7.3 1.0 30˝ 36˝ 914 17 7.7 1.0 width* 48˝ 1219 20 9.1 1.5 (762mm) 60˝ 1524 25 11.4 1.8 * 14˝ and 30˝ widths (356 and 762mm) do not fit Full-Size Dolly Truck Security Units.

14˝ width*

For use as intermediate shelves only. chrome model # n/a QA1436C QA1448C QA1460C n/a QA2436C QA2448C QA2460C

list 93 104 114 114 132 149

EAGLEgard® model # list n/a QA1436E 103 QA1448E 119 QA1460E 127 n/a QA2436E 132 QA2448E 155 QA2460E 177

stainless steel model # list n/a QA1436S 255 QA1448S 305 QA1460S 382 n/a QA2436S 376 QA2448S 446 QA2460S 542

Ordering Full Size Security Units Assembled: • Security carts shipped assembled, add $350 to list price and add suffix “-A”. Example: SC1460E-A. • For assembled unit with center shelves installed (evenly spaced), indicate number of center shelves wanted by adding a number before the “A” in suffix “-A”.

42

• For example, suffix “-1A” indicates assembled unit with one center shelf, suffix “-2A” indicates assembled unit with two center shelves, and so on. Example: SC1460E-2A. • PRICING: add $350 to list price of security unit, and add list price of each applicable center shelf to be added.

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


SHELVING / RETAIL DISPLAY Catalog Section 1

Mini Security Units see spec sheet

EG01.22 FEATURES:

• Stationary chrome plated units. • 40˝ (1016mm) height. • Shipped knocked down. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

(Patent #5,390,803)

length weight in. mm lbs. kg

Patented QuadTruss® Design makes shelves up to 25% stronger and provides a retaining ledge for increased strength and product retention.

16˝ width (406mm)

26˝ width (660mm)

38˝ 50˝ 38˝ 50˝

965 1270 965 1270

88 104 100 114

39.9 47.2 45.4 51.7

cubic feet model # 8.6 MSC1436 • 9.6 MSC1448 9.2 MSC2436 * 1.1 MSC2448*

list 1174 1474 1213 1525

* Optional stem casters (page 11) available only for these models.

Optional Shelves for Mini Security Units • With chrome plated finish. length in. mm

14˝ width

36˝ 48˝ 36˝ 48˝

(356mm)

24˝ width (610mm)

914 1219 914 1219

weight cubic lbs. kg feet model # 8 3.6 0.5 1436C • 10 4.5 0.7 1448C • 13 6.0 0.8 2436C • 16 7.3 1.2 2448C •

list 63 75 84 102

Optional Add-A-Shelf® Adjustable Shelves for All Security Units see spec sheet

WEIGHT CAPACITY:

• 300 lb.(136.1 kg) per shelf. Note:

Top and bottom shelves of unit must be standard shelves—see page 42.

EG01.22 WARNING:

optional Add-A-Shelf® being added to security unit

FEATURES:

• Use Add-A-Shelf® shelves for intermediate shelves.

• Chrome finish. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Patented QuadTruss® Design (Patent #5,390,803)

length in. mm

14˝ width (356mm)

24˝ width (610mm)

36˝ 48˝ 36˝ 48˝ 60˝

914 1219 914 1219 1524

weight cubic lbs. kg feet model # list 8 3.6 0.5 A1436C • 71 10 4.5 0.7 A1448C • 81 13 5.9 0.8 A2436C • 92 16 7.3 1.2 A2448C • 108 21 9.5 1.5 A2460C • 129 100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

makes shelves up to 25% stronger and provides a retaining ledge for increased strength and product retention.

GET FREE DOWNLOADS • Spec Sheet • Product Instructions • Special Flyers • Brochures •

www.eaglegrp.com

43


SHELVING / RETAIL DISPLAY Catalog Section 1

Syrup Tank Racks see spec sheet

EG01.31

FEATURES:

• All models chrome-plated. • Two styles available. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Style “A” – 33˝ (838mm) height

style “A” syrup tank rack with optional drip pan shown

style “B” syrup tank rack with optional drip pan shown

24˝ width (610mm)

Includes: • One dunnage mat with frame. • One 3-sided frame. • Four 33˝ (838mm) posts. • Cable assembly.

length in. mm

weight lb. kg

cu ft

30˝ 48˝

40 50

0.2 0.3

762 1219

18.1 22.7

length in. mm

weight lb. kg

cu ft

30˝ 48˝

8 12

0.2 0.3

762 1219

weight lb. kg

cu ft

68 88

0.3 0.4

30.8 39.9

model # STR2430B STR2448B

list 632 766

• Chrome-plated. • Cylinders are secured to retainer to further prevent damage.

• Stainless steel.

(610mm)

list 415 495

Optional Cylinder Retainer for Tank Racks

Optional Drip Pans for Syrup Tank Racks

24˝ width

model # STR2430A STR2448A

Style “B” – 74˝ (1880mm) height Includes: • One dunnage mat with frame. • 0ne 3-sided frame. • Four 74˝ (1880mm) posts. • Cable assembly. • Two standard shelves.

3.6 5.4

model # DP30 DP48

list 220 246

width in. mm

weight lb. kg

cu ft

24˝

7

0.3

610

Modular Bag-N-Box Systems see spec sheet

EG01.29 INCLUDES:

3.2

model # CRR24-C

list 104

• One slanted shelf to allow syrup to run to front of box. • Front 1˝ (25mm) ledge is provided on slanted shelf. • All units are chrome-plated finish. Freight class is 70.0.

For storage and usage of syrup boxes.

(•) MTS (made to stock) / ( ) MTO (made to order)

Patented QuadTruss® Design (Patent #5,390,803)

# of shelves & description 1 slanted shelf; 2 straight shelves 1 slanted shelf; 3 straight shelves 1 slanted shelf; 4 straight shelves 1 slanted shelf; 2 straight shelves 1 slanted shelf; 3 straight shelves 1 slanted shelf; 4 straight shelves

44

width x length x height in. mm 21˝ x 36˝ x 54˝ 21˝ x 36˝ x 54˝ 21˝ x 36˝ x 54˝ 21˝ x 48˝ x 54˝ 21˝ x 48˝ x 54˝ 21˝ x 48˝ x 54˝

533 x 914 x 1372 533 x 914 x 1372 533 x 914 x 1372 533 x 1219 x 1372 533 x 1219 x 1372 533 x 1219 x 1372

makes shelves up to 25% stronger and provides a retaining ledge for increased strength and product retention.

weight lb. kg

cu ft

19 33 48 21 39 57

0.6 1.8 2.8 0.7 2.2 3.3

8.6 15.0 21.8 9.5 17.6 25.9

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

model # B2136C 2B2136C 3B2136C B2148C 2B2148C 3B2148C

list 278 344 409 325 402 481


SHELVING / RETAIL DISPLAY Catalog Section 1

Modular Desks / Workstations see spec sheet

EG01.02

FEATURES:

• Heavy gauge type 304 stainless steel. • Two chrome cantilever open-wire shelves. • 16 gauge 1˝ (25mm) diameter chrome-plated posts with exclusive MasterSeal® coating. • Rear grid panel constructed of chrome • Three-sided 1˝ (25mm) channel frame. • Leveling feet. Note:

Optional keyboard drawer available. To order add suffix “-K” to model number (example: MD2448-K) and $329 to list price.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Optional Keyboard Station

24˝ width (610mm)

length in. mm

weight cubic lb. kg feet

36˝ 48˝

78 85

914 1219

35.3 38.6

1.0 1.0

• Mounts under tabletop. • 201⁄2˝ wide x 111⁄2˝ deep (521 x 292mm). model # MD2436 MD2448

list 1142 1236

weight lbs. 6.0

Mobile Computer Workstations see spec sheet

EG01.04

(Patent #5,390,803)

cubic

kg 2.7

feet 0.35

• • • • • • • • • INCLUDES: •

makes shelves up to 25% stronger and provides a retaining ledge for increased strength and product retention.

in.

24˝ (610mm) 30˝ (762mm)

24˝ 30˝

40 56

list

329

Two 48˝ (1219mm) rear posts. Two 33˝ (838mm) front posts. One 12˝ (305mm) wide cantilevered shelf. One wire tabletop. One 3-sided frame. One full-length wire undershelf. Keyboard drawer. 5˝ (127mm) resilient casters–two with brake. 383⁄8˝ (981mm) working height. 533⁄8˝ (1362mm) overall height.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

length weight mm lbs. kg 610 762

KBD-1/SS

Note: See page 11 for other casters available.

Patented QuadTruss® Design

width**

stainless steel model #

18.1 25.4

cu ft

chrome model # *list 3.7 MCWS2424C • 909 4.5 MCWS3030C 991

stainless steel model # *list MCWS2424S 1615 MCWS3030S 1694

* List prices do not include cost of mouse shelf. ** 24˝ x 24˝ (610 x 610mm) units feature 14˝ x 24˝ (357 x 610mm) undershelf, 30˝ x 30˝ (762 x 762mm) units feature 18˝ x 30˝ (457 x 762mm) undershelf.

shown with optional mouse shelf

Optional Mouse Shelf for Mobile Computer Workstations width

in.

7˝ (178mm)

length weight mm lbs. kg 178

0.1

2.0

cu ft 0.9

model # MS-C

list 11

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

45


SHELVING / RETAIL DISPLAY Catalog Section 1

Shelving Task Station Packages

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

A variety of applications, each task station is designed for certain tasks. • Designed for easy reach and maximum use of space. • Many sizes available. • Finishes available in chrome or zinc.

Biscuit Workstation

Sandwich Prep Station

see spec sheet EG01.51 • NSF-approved components. • Keeps tasks together. • 16 gauge type 304 stainless steel top with hat channel supports. • 24˝ x 60˝ x 63˝ overall dimensions. model # TSB2460Z

Microwaves not included.

• • • •

list weight: 189 lbs. 85.7 kg 1887

Refrigerator, drink dispensers and drawer not included.

• • •

see spec sheet EG01.53 Keeps work-related tasks together. Customize using standard components. 18 gauge type 304 stainless steel top and undershelf, both utilizing hat channel supports. 24˝ x 60˝ x 74˝ overall dimensions (821⁄2˝ height with dividers mounted).

model # TSCO2460Z

• • • • •

list weight: 168 lbs. 76.2 kg 1011

Carry-Out Worktable

list 1068

• •

Microwaves not included.

model # TSPP2460Z

46

list 1564

weight: 113 lbs. 51.3 kg

list 1835

weight: 146 lbs. 66.2 kg

Cup Tower see spec sheet EG01.56 • Allows for easy inventory count. • Easy identification of product. • 30˝ x 36˝ x 74˝ overall dimensions. model # TSC3036Z

Pizza Prep Area • • • •

weight: 50 lbs. 22.7 kg

see spec sheet EG01.55 Open-wire construction. Three full-length wire overshelves. 18 gauge type 304 stainless steel top with hat channel supports. Two wire undershelves. Each overshelf accommodates two standard-size microwaves. Comes with bins, dividers, and grid panels. 30˝ x 48˝ x 74˝ overall dimensions (excluding bins mounted).

model # TSM3048C

weight: 138 lbs. 62.6 kg

see spec sheet EG01.54 Utilizes valuable wall space. Standard parts create customized look. Keeps task-related items together. 14 gauge type 304 stainless steel top with hat channel supports. 24˝ x 60˝ x 381⁄2˝ worktable with galvanized adjustable undershelf.

list 539

Microwave Prep Table

see spec sheet EG01.52 Easy to clean work surface and bins. Customize using standard components. Keeps work-related tasks together. Open design allows for easy restocking. 36˝ x 60˝ x 74˝ overall dimensions. model # TSD3660Z

see spec sheet EG01.50 Flexible design allows for custom look while using standard components. Unit allows for various width, length and height refrigerators. Keeps task-related items together. 14˝ x 36˝ x 74˝ overall dimensions (excluding bins mounted). model # TSSP1436Z

Drive-Through Task Station • • • • •

Custom configurations and alternative size options available!

• Easy to clean. • Easy to assemble. • Utilizes standard catalog items.

list 765

weight: 104 lbs. 47.2 kg

Pizza Carry-Out Workstation • • • •

see spec sheet EG01.57 Gravity-feed dividers keep boxes organized. Minimize damage to boxes. Rotated product. 14˝ x 48˝ x 74˝ overall dimensions (excluding pizza box dividers mounted). model # TSP1448Z

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

list 871

weight: 94 lbs. 42.6 kg


SHELVING / RETAIL DISPLAY Catalog Section 1

adjusTable® Work Surface Systems see spec sheet

• Unit can be further expanded and customized by adding optional shelving accessories (see pages 48-55). • Also, wire shelves with zinc or epoxy finishes (see page 7) or solid shelves (see page 13) can be used as undershelves or overshelves. • Optional drawers available (see pages 140-143).

EG10.09

CUSTOMIZABLE WORK SURFACE CONFIGURATIONS TO MEET YOUR NEEDS!

CUSTOM:

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

basic unit

Patented QuadTruss® Design (Patent #5,390,803)

makes shelves up to 25% stronger and provides a retaining ledge for increased strength and product retention.

1-tier unit

Additional wire undershelves, solid stainless steel undershelves, chrome wire overshelves, or solid stainless steel overshelves make the possibilities almost unlimited. 2-tier unit

Basic Units length in. 24˝ 36˝ width 48˝ (610mm) 60˝ 30˝ 36˝ width 48˝ (762mm) 60˝

mm 914 1219 1524 914 1219 1524

cu

weight

ft lbs. kg 4.5 65 29.5 5.7 81 36.7 7.1 99 44.9 4.5 75 34.0 5.7 94 42.6 7.1 115 52.2

16/304 model # T2436EBW T2448EBW T2460EBW T3036EBW T3048EBW T3060EBW

list 767 834 976 851 959 1111

1-tier Units 14/304

weight

model # list T2436EW 841 T2448EW 966 T2460EW 1111 T3036EW 953 T3048EW 1094 T3060EW 1264

lbs. 73 91 113 83 104 129

kg 33.1 41.3 51.3 37.6 47.2 58.5

16/304 model # T2436EBW-1 T2448EBW-1 T2460EBW-1 T3036EBW-1 T3048EBW-1 T3060EBW-1

list 955 1071 1209 1038 1165 1323

2-tier Units 14/304

model # T2436EW-1 T2448EW-1 T2460EW-1 T3036EW-1 T3048EW-1 T3060EW-1

weight

16/304

14/304

list lbs. kg model # list model # list 1028 81 36.7 T2436EBW-2 1048 T2436EW-2 1122 1171 101 45.8 T2448EBW-2 1181 T2448EW-2 1282 1323 127 57.6 T2460EBW-2 1329 T2460EW-2 1444 1144 91 41.3 T3036EBW-2 1129 T3036EW-2 1236 1295 114 51.7 T3048EBW-2 1274 T3048EW-2 1411 1479 143 64.9 T3060EBW-2 1443 T3060EW-2 1601

CONSISTS OF: CONSISTS OF: • Stainless steel table top/work surface • Stainless steel table top/work surface with with hat channel supports. hat channel supports. • Two 63˝ (1600mm) rear chrome posts. • Two 54˝ (1372mm) rear chrome posts. • Two 33˝ (838mm) front chrome posts. • Two 33˝ (838mm) front chrome posts. • Two 21˝ (533mm) front chrome posts • Two 29˝ (737mm) front chrome posts for overshelf. for overshelves. • One 14˝ (356mm) wide chrome • Two 14˝ (356mm) wide chrome wire wire overshelf. overshelves. • Two chrome wire undershelves.* • Two chrome wire undershelves.* *18˝ (457mm) wide undershelves used for 24˝ (610mm) wide tables; 24˝ (610mm) wide undershelves used for 30˝ (762mm) wide tables. CONSISTS OF: • Stainless steel table top/work surface with hat channel supports. • Four 33˝ (838mm) chrome posts. • Two chrome wire undershelves.*

Optional Keyboard Stations • 201⁄2˝ wide x 111⁄2˝ deep (521 x 292mm). Table Mount Wire Mount weight lbs. kg 6.0

2.7

cubic feet 0.35

stainless steel chrome model # list model # list KBD-1/SS 329 KBD-2 • 206 table mount keyboard station

stainless steel model # list KBD-2/SS 347 wire mount keyboard station

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

Post Clamp for 1-tier and 2-tier Units • Attaches 3˝ x 3˝ (76 x 76mm) grid panel (see enclosure panels on page 25 and wall mats on page 94) onto AdjusTable® systems with overshelves. • Chrome-plated collar with 1⁄4-20 weld stud, chrome acorn nut and heavy gauge clamp. model # A210098

list each 17

47


SHELVING / RETAIL DISPLAY Catalog Section 1

Shelving Components / Accessories

Freight class is 70.0.

see spec sheets EG01.03A EG01.03D

(•) MTS (made to stock) / ( ) MTO (made to order)

Collar Plug

Aluminum Split Sleeves

• Fills shelf corner openings where posts have been eliminated by use of “S” hooks. • Packed four per bag.

• For conductive, over-the-road or high-temperature installations. • Set of four.

model # COLLAR PLUG (set of four)

with zinc rings model # list A208909 • 15

list 5

Post Cap

with stainless rings model # list A208908 • 27

Security “S” Hooks • Discourages separation of adjoined shelf units. • Hardware included.

• Four included with each shelf. • High-temperature-resistant ABS plastic create a positive lock that becomes stronger as the load increases.

list ea 2

Post Clamps

model # PLASTIC SPLIT SLEEVES (set of four)

• Provides maximum strength when shelving units are connected by clamping posts securely together. chrome black epoxy model # list ea model # list ea POST CLAMP 11 A214169 13

• Chrome-plated. • For use with enclosure panels (page 25) in conjunction with wire shelf.

• Join individual shelving units in a number of combinations using “S” hooks. • Joins end-to-end, back-toback, or at right angles. • Two required per connection.

5

model # A200012 •

list 8

list ea 3

Rods and Tabs

Casting

rod

• Stabilizes leveling foot. list ea 2

tab casting

Glides

Leveling Foot

• Fits under leveling bolt to protect floors from abrasion.

• Use these to accommodate for uneven floors. model # list ea LEVELING FOOT 2

list ea 3

list ea 9

“S” Hooks

list

• Packed four per bag.

model # A203568

model # list ea RETAINING CLAMP 4

model # S-HOOKS-SK

Plastic Conductive Split Sleeves model # A219236

Retaining Clamp

model # GLIDES

NEW

Plastic Split Sleeves

• Fills post end openings at top of shelving unit. model # POST CAP

aluminum split sleeves and ring

leveling foot

chrome model # list ea R54-C 29 R63-C • 32 R74-C • 37 R86-C • 41

stainless steel model # list ea R54-S 43 R63-S 45 R74-S 54 R86-S 58

Foot Plates • These allow unit to be bolted to the floor. • Can be used without bolts when a wider foot is desired for more stability. type of foot plate NEW triangular

48

square

“space-saving” square

Triangular Square

NEW “Space-Saving” Square

chrome model # list ea FOOT PLATE 12 A207199 20 A226093 22

black epoxy model # list ea FOOT PLATE-BL 12 A226104 20 A226105 22

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

stainless steel model # list ea FOOT PLATE-S 24 A208627 29 A226096 30


SHELVING / RETAIL DISPLAY Catalog Section 1

Dividers see spec sheet EG01.03A

FEATURES:

• 8˝ high (203mm) dividers keep shelf contents organized. Freight class is 70.0.

Solid Shelving Dividers length in. mm 14˝ 18˝ 21˝ 24˝ 30˝ 36˝

cubic feet

356 457 533 610 762 914

0.6 0.6 0.8 1.0 1.2 1.4

weight lb. kg 1.0 1.3 1.5 1.8 2.3 3.0

chrome model # SSD14-C SSD18-C SSD21-C SSD24-C • SSD30-C SSD36-C

0.5 0.6 0.7 0.8 1.0 1.4

(•) MTS (made to stock) / ( ) MTO (made to order)

stainless steel model # list SSD14-S 82 SSD18-S 88 SSD21-S 94 SSD24-S 96 SSD30-S 115 SSD36-S 117

list 28 34 39 46 57 67

Wire Shelving Dividers length in. mm 14˝ 18˝ 21˝ 24˝ 30˝ 36˝

356 457 533 610 762 914

cubic weight feet lb. kg 0.6 0.6 0.8 1.0 1.2 1.4

1.0 1.0 2.0 2.0 2.0 3.0

0.5 0.5 0.9 0.9 0.9 1.4

chrome model # list SD14-C • 24 SD18-C • 33 SD21-C • 36 SD24-C • 39 SD30-C 48 SD36-C 61

VALU-MASTER® model # list SD14-V 36 SD18-V 42 SD21-V 45 SD24-V 53 SD30-V 57 SD36-V 58

Valu-Gard® model # list SD14-VG 36 SD18-VG 42 SD21-VG 45 SD24-VG 53 SD30-VG 57 SD36-VG 58

Pizza Box Divider see spec sheet EG01.03A FEATURES:

• • • •

EAGLEgard® model # list SD14-E 42 SD18-E 49 SD21-E 52 SD24-E 58 n/a n/a n/a n/a

stainless model # list SD14-S 58 SD18-S 68 SD21-S 77 SD24-S • 84 SD30-S 105 SD36-S 128

26˝ (660mm) height. Attaches onto 14˝ (356mm) wide shelving. Zinc finish. Sold individually. Freight class is 70.0.

width in. mm 28˝

711

cubic feet 1.5

(•) MTS (made to stock) / ( ) MTO (made to order)

weight lb. kg 5

model # PZD-Z

2.3

list 137

Slanted Shelves see spec sheet EG01.03E PACKAGING:

• 36˝ - 48˝ lengths: Four per box. • 60˝ length: Two per box. • Four pairs of split sleeves per shelf. Freight class is 70.0.

Increased visibility allows easy access to shelf contents.

(•) MTS (made to stock) / ( ) MTO (made to order)

Patented QuadTruss® Design optional slanted shelves

21˝ width (533mm)

24˝ width (610mm)

(Patent #5,390,803)

length in. mm

weight lb. kg

36˝ 48˝ 60˝ 36˝ 48˝ 60˝

11 14 18 13 16 21

914 1219 1524 914 1219 1524

5.0 6.4 8.2 5.9 7.3 9.5

cubic feet 0.8 1.1 1.3 0.8 1.2 1.5

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

EAGLEbrite® model # list SL2136Z 85 SL2148Z 112 SL2160Z 119 SL2436Z 105 SL2448Z 124 SL2460Z 134

makes shelves up to 25% stronger and provides a retaining ledge for increased strength and product retention.

chrome model # SL2136C SL2148C SL2160C SL2436C SL2448C SL2460C

list 94 122 132 117 136 143

EAGLEgard® model # list SL2136E 112 SL2148E 147 SL2160E 171 SL2436E 139 SL2448E 165 SL2460E 175

49


SHELVING / RETAIL DISPLAY Catalog Section 1

Ledges see spec sheet EG01.03A

FEATURES:

• Prevents contents from falling off unit. • Easily attaches without the use of tools. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

4˝-high (102mm) ledge for wire shelving

1˝-high (25mm) ledge for wire shelving

Solid Shelving Ledges 4˝-high (102mm) ledges

1˝-high (25mm) ledges in.

length mm

14˝ 18˝ 21˝ 24˝ 30˝ 36˝ 42˝ 48˝ 54˝ 60˝ 72˝

356 457 533 610 762 914 1067 1092 1372 1524 1829

cu ft

weight lb. kg

0.2 0.3 0.3 0.3 0.5 0.6 0.6 0.7 0.8 0.8 1.0

0.2 0.3 0.4 0.5 0.7 0.9 1.1 1.3 1.5 1.7 2.1

0.1 0.1 0.2 0.2 0.3 0.4 0.5 0.6 0.7 0.8 1.0

chrome model # list SL14-1C 18 SL18-1C 19 SL21-1C 22 SL24-1C 27 SL30-1C 28 SL36-1C 31 SL42-1C 37 SL48-1C 39 SL54-1C 40 SL60-1C 43 SL72-1C 48

stainless steel model # list SL14-1S 34 SL18-1S 40 SL21-1S 41 SL24-1S 44 SL30-1S 58 SL36-1S 67 SL42-1S 74 SL48-1S 75 SL54-1S 86 SL60-1S 97 SL72-1S 105

weight lb. kg 0.8 0.9 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6

VALU-MASTER® model # list L14-1V 15 L18-1V 16 L21-1V 17 L24-1V 18 L30-1V 19 L36-1V 27 L42-1V 29 L48-1V 31 L54-1V 32 L60-1V 34 L72-1V 35

Valu-Gard® model # list L14-1VG 15 L18-1VG 16 L21-1VG 17 L24-1VG 18 L30-1VG 19 L36-1VG 27 L42-1VG 29 L48-1VG 31 L54-1VG 32 L60-1VG 34 L72-1VG 35

stainless model # list L14-1S 24 L18-1S 25 L21-1S 27 L24-1S 29 L30-1S 41 L36-1S 45 L42-1S 52 L48-1S 53 L54-1S 60 L60-1S 66 L72-1S 71

VALU-MASTER® model # list L14-4V 22 L18-4V 24 L21-4V 25 L24-4V 27 L30-4V 31 L36-4V 38 L42-4V 45 L48-4V 47 L54-4V 51 L60-4V 54 L72-4V 56

Valu-Gard® model # list L14-4VG 22 L18-4VG 24 L21-4VG 25 L24-4VG 27 L30-4VG 31 L36-4VG 38 L42-4VG 45 L48-4VG 47 L54-4VG 51 L60-4VG 54 L72-4VG 56

EAGLEgard® model # list L14-4E 24 L18-4E 26 L21-4E 27 L24-4E 29 L30-4E 36 L36-4E 39 L42-4E 47 L48-4E 48 L54-4E 52 L60-4E 55 L72-4E 62

0.4 0.4 0.5 0.6 0.6 0.7 0.8 0.9 1.0 1.1 1.2

chrome model # list SL14-4C 29 SL18-4C 33 SL21-4C 34 SL24-4C 34 SL30-4C 43 SL36-4C 51 SL42-4C 54 SL48-4C 62 SL54-4C 64 SL60-4C 65 SL72-4C 77

stainless steel model # list SL14-4S 47 SL18-4S 49 SL21-4S 57 SL24-4S 63 SL30-4S 72 SL36-4S 88 SL42-4S 98 SL48-4S 109 SL54-4S 122 SL60-4S 127 SL72-4S 140

Wire Shelving 1˝-high (25mm) Ledges length in.

mm

cu ft

14˝ 18˝ 21˝ 24˝ 30˝ 36˝ 42˝ 48˝ 54˝ 60˝ 72˝

356 457 533 610 762 914 1067 1092 1372 1524 1829

0.2 0.3 0.3 0.3 0.5 0.6 0.6 0.7 0.8 0.8 1.0

weight lb. kg 0.2 0.3 0.4 0.5 0.7 0.9 1.1 1.3 1.5 1.7 2.1

0.1 0.1 0.2 0.2 0.3 0.4 0.5 0.6 0.7 0.8 1.0

chrome model # list L14-1C 16 L18-1C 17 L21-1C 19 L24-1C • 22 L30-1C 23 L36-1C 25 L42-1C 28 L48-1C • 29 L54-1C • 31 L60-1C • 34 L72-1C 39

Wire Shelving 4˝-high (102mm) Ledges length in.

mm

cu ft

14˝ 18˝ 21˝ 24˝ 30˝ 36˝ 42˝ 48˝ 54˝ 60˝ 72˝

356 457 533 610 762 914 1067 1092 1372 1524 1829

0.2 0.3 0.3 0.3 0.5 0.6 0.6 0.7 0.8 0.8 1.0

50

weight lb. kg 0.8 0.9 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6

0.4 0.4 0.5 0.6 0.6 0.7 0.8 0.9 1.0 1.1 1.2

chrome model # list L14-4C • 19 L18-4C • 22 L21-4C • 23 L24-4C • 25 L30-4C • 31 L36-4C • 36 L42-4C • 39 L48-4C • 42 L54-4C 43 L60-4C • 46 L72-4C • 55

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

stainless model # list L14-4S 40 L18-4S • 43 L21-4S 53 L24-4S • 57 L30-4S 68 L36-4S • 45 L42-4S 91 L48-4S 102 L54-4S 116 L60-4S 117 L72-4S • 146


SHELVING / RETAIL DISPLAY Catalog Section 1

Slide Systems

LOAD CAPACITY:

see spec sheet EG01.03C FEATURES:

• Up to 35 lbs. (15.9 kg). • Easily attaches without the use of tools.

Clever way to improve space efficiency.

slide system with tote boxes

ty Weight Capaci s. lb 35 to Up

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

fits shelf

adaptable tote boxes

width x length x depth

24˝ (610mm) 24˝ (610mm) 21˝ (533mm) 21˝ (533mm)

TB1022-3, TB1022-6

14˝ x 215⁄8˝ x 101⁄4˝ (356 x 683 x 260mm) 20˝ x 215⁄8˝ x 101⁄4˝ (508 x 683 x 260mm) 14˝ x 171⁄8˝ x 101⁄4˝ (356 x 543 x 260mm) 251⁄8˝ x 171⁄8˝ x 101⁄4˝ (797 x 543 x 260mm)

TB1722-3, TB1722-6, TB1722-9 TB1016-3, TB1016-6 TB1722-3*, TB1722-6*, TB1722-9*

weight lbs. kg

cubic feet

5.0

2.3

2.0

model # TS1421

list 121

4.7

2.1

3.8

TS2021 •

126

3.5

1.6

1.8

TS1417

120

4.0

1.8

4.0

TS2517

118

* Fits TS2517 sideways

Tote Boxes for Slide Systems see spec sheet EG01.03C FEATURES:

• Dividable up to 11⁄8˝ (29mm) square compartments. • Injection molded from high-density polyethylene material. Note:

Also available in molded fiberglass (see page 52).

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

fits slide system

width x length x depth inches mm

TS1417 107⁄8˝ x 161⁄2˝ x 31⁄2˝ TS1417 107⁄8˝ x 161⁄2˝ x 6˝ TS2021, TS2517 171⁄2˝ x 221⁄2˝ x 3˝ TS2021, TS2517 171⁄2˝ x 221⁄2˝ x 6˝ TS2021, TS2517 171⁄2˝ x 221⁄2˝ x 8˝ TS1421, TS2517 11˝ x 221⁄2˝ x 3˝ TS1421, TS2517 11˝ x 221⁄2˝ x 53⁄4˝ * Fits TS2517 sideways

TB1016 & TB1722 series

276 x 419 x 89 276 x 419 x 152 444 x 572 x 76 444 x 572 x 152 444 x 572 x 203 279 x 572 x 76 279 x 572 x 146

weight lbs. kg 1.0 1.5 2.3 3.5 4.0 1.5 2.0

0.5 0.7 1.0 1.6 1.8 0.7 0.9

cubic feet

color

0.4 0.8 0.8 1.5 3.0 0.6 1.1

gray gray gray gray gray white white

model # list TB1016-3 29 TB1016-6 31 TB1722-3 * 55 TB1722-6 * • 63 TB1722-9 * 74 TB1022-3 33 TB1022-6 40

TB1022-6

Tote Box Dividers and Covers Long Dividers fits tote box

color

TB1016-3 TB1016-6 TB1722-3 TB1722-6 TB1722-9 TB1022-3 TB1022-6

gray gray gray gray gray white white

model # A217766 A203841 A217763 A203842 A203845 A203838 A217759

list 4 4 7 5 5 7 5

Short Dividers

max. # accepted 7 7 11 11 11 7 7

model # A217760 A203843 A217764 A203844 A203846 A203839 A217791

list 6 6 5 6 6 6 6

Covers

max. # accepted model # 11 A217765 11 A217765 15 A217638 15 A217638 15 A217638 15 A203874 15 A203874

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

list 36 36 47 47 47 42 42

cover (for TB1016 and TB1722 tote boxes)

dividers

51


SHELVING / RETAIL DISPLAY Catalog Section 1 FEATURES: • Clear vinyl.

Snap-On Card Holder see spec sheet EG01.03C

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order) Note:

in.

holds labels mm

2˝ x 8˝ 3˝ x 5˝ 5˝ x 8˝

model # CH28 CH35 CH58

51 x 203 76 x 127 127 x 203

list 8 9 10

Molded Fiberglass Boxes and Trays see spec sheet EG01.03C

FEATURES:

• Made of thermoset polyester composite material. • Flame and chemical resistant. Freight class is 70.0.

Boxes are stackable for maximum storage efficiency!

description

assorted molded fiberglass boxes and trays

tray stacking box stacking box stacking box lid

(•) MTS (made to stock) / ( ) MTO (made to order)

bottom inside dimensions length x width x depth in. mm 243⁄8˝ x 161⁄4˝ x 1˝ 237⁄8˝ x 157⁄8˝ x 27⁄8˝ 237⁄8˝ x 157⁄8˝ x 41⁄2˝ 237⁄8˝ x 157⁄8˝ x 53⁄4˝ —

For use only with #TB1016 and TB1722 tote boxes.

619 x 413 x 25 606 x 403 x 73 606 x 403 x 114 606 x 403 x 146 —

top outside dimensions length x width x height in. mm 253⁄4˝ x 177⁄8˝ x 11⁄8˝ 253⁄4˝ x 173⁄4˝ x 3˝ 253⁄4˝ x 173⁄4˝ x 41⁄2˝ 253⁄4˝ x 173⁄4˝ x 6˝ 253⁄4˝ x 173⁄4˝

654 x 454 x 29 654 x 451 x 76 654 x 451 x 114 654 x 451 x 152 654 x 451

cu ft 0.1 0.6 1.0 1.3 —

model # list A208505 67 A208506 91 A208507 82 A208508 79 A208513* 47

* Model #A208513 lid fits models A208506, A208507, and A208508 stacking boxes.

Storage Baskets see spec sheet EG01.03E

FEATURES:

• Chrome-plated. • Easily attaches to hanger rail or side of wire shelf. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

width x length x height in. mm 133⁄8˝ x 5˝ x 7˝ 173⁄8˝ x 71⁄2˝ x 5˝ 173⁄8˝ x 71⁄2˝ x 10˝

340 x 127 x 178 441 x 191 x 127 441 x 191 x 254

File Basket see spec sheet EG01.03E

FEATURES:

Ideal for organizing standard-sized file folders. width x length x height in. mm 25⁄8˝ x 123⁄4˝ x 83⁄4˝

52

67 x 324 x 222

weight cubic lbs. kg feet 9 7 11

4.1 3.2 5.0

0.4 0.6 1.0

model # A216650 A216651 A216652

list 18 20 24

• Chrome-plated. • Fits all widths. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

weight cubic lbs. kg feet model # 2 0.9 0.3 A216649

list 15

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


SHELVING / RETAIL DISPLAY Catalog Section 1

Sliding Shelf see spec sheet EG01.03E width x length in mm

• Chrome-plated. • For use with standard 1˝ (25mm)-diameter posts—on 18˝ (457mm)-wide wire shelf or FEATURES: solid shelf units. • 20 lb. (9.0 kg) weight capacity per shelf.

weight chrome lbs. kg model # list 18 x 36 457 x 914 9 4.1 SLS1836C 83

• • • •

Tray Slides see spec sheet EG01.03C FEATURES:

Slides help maximize your use of space!

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

13⁄4˝ (45mm) spacing, 22˝ (559mm) height. Sold as a set of two. 18˝ or 24˝ (457 or 610mm) wide applications. Can be used with tote boxes on page 51 and with sheet pans on page 321. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Standard

width

cu ft

171⁄8˝ (435mm) 231⁄8˝ (587mm)

2.3 3.0

weight chrome EAGLEgard® lbs. kg model # list model # list 9 4.1 TS18-C 93 TS18-E 124 11 5.0 TS24-C 99 TS24-E 128

Adjustable Undershelf Slides see spec sheet EG01.03C adjustable undershelf slides with tote box

weight lbs. kg

description slides for 18˝ (457mm) wide shelf slides for 21˝ (533mm) wide shelf slides for 24˝ (610mm) wide shelf slides for 30˝ (762mm) wide shelf slides with side-to-side mount, for 24˝ (610mm) wide shelf slides with side-to-side mount, for 30˝ (762mm) wide shelf

Heavy Duty

NEW

Holds 9 trays.

Holds 11 trays. Features panel assembly welded to the back of slides

weight chrome EAGLEgard® lbs. kg model # list model # list 12 5.4 HDTS18-C 188 HDTS18-E 194 15 6.8 HDTS24-C 199 HDTS24-E 215

• Stainless steel. • Accommodates any tote box side-to-side dimension. • Sold as a set. FEATURES: Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Tote Boxes for Adjustable Undershelf Slides

3 3 3 4 3

1.4 1.4 1.4 1.8 1.4

model # US18-S US21-S US24-S US30-S USS24-S

list 74 88 95 106 125

4

1.8

USS30-S

151

One-Piece Slides

width x length x depth in. mm 171⁄2˝ x 223⁄8˝ x 3˝ 171⁄2˝ x 223⁄8˝ x 6˝ 171⁄2˝ x 223⁄8˝ x 8˝

FEATURES:

weight lbs. kg

446 x 568 x 76 446 x 568 x 152 446 x 568 x 203

2 3 4

0.9 1.4 1.8

cubic feet model # 0.8 TB1722-3 1.4 TB1722-6 • 2.3 TB1722-9

list 55 63 74

• Easily attaches to shelf.

see spec sheet EG01.03C

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Helps prevent shelf clutter!

one-piece slide with tote box

description

weight cubic lbs. kg feet

slides for 18˝ (457mm) wide shelf slides for 21˝ (533mm) wide shelf slides for 24˝ (610mm) wide shelf

6 8 9

2.7 3.6 4.1

0.4 0.6 0.8

Tote Box for One-Piece Slides model # OUS18 OUS21 OUS24

list 94 95 97

width x length x depth in. mm 171⁄2˝ x 223⁄8˝ x 6˝

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

446 x 568 x 152

weight lbs. kg 3.5

1.6

cubic feet model # list 1.5 TB1722-6 • 63

53


SHELVING / RETAIL DISPLAY Catalog Section 1

Post Extension Kit and Components see spec sheet EG01.03D plastic cap center wall bracket post casting double threaded bolt casting post casting leveling bolt

FEATURES:

Note: DO NOT attempt to use any higher combinations than P54 and P86 maximum, 140˝ (3556mm) total. Any combinations higher than 86˝ (2184mm) must be attached to walls using wall bracket on post adjacent to wall. Place units only against wall, not in center of room.

post extension assembly

Post Extension Kit description

model #

list

consists of components listed below, set of four

4PEK

81

model # A200868 B201023 A207351

list 3 14 7

• Screw posts together with double-threaded bolt and extra foot casting.

Components item double-threaded bolt wall bracket casting

Note:

3-Sided Double Truss Frames

See page 55 for 3-Sided Channel Frames.

Freight class is 70.0.

see spec sheet EG01.03B

(•) MTS (made to stock) / ( ) MTO (made to order)

Improves support and stability!

two trusses in one

in.

18˝ width (457mm)

21˝ width (533mm)

24˝ width (610mm)

30˝ width (762mm)

36˝ width (914mm)

54

length mm

24˝ 30˝ 36˝ 42˝ 48˝ 60˝ 72˝ 24˝ 30˝ 36˝ 42˝ 48˝ 60˝ 72˝ 24˝ 30˝ 36˝ 42˝ 48˝ 60˝ 72˝ 36˝ 48˝ 60˝ 72˝ 36˝ 48˝ 60˝ 72˝

610 762 914 1067 1219 1524 1829 610 762 914 1067 1219 1524 1829 610 762 914 1067 1219 1524 1829 914 1219 1524 1829 914 1219 1524 1829

weight lbs. kg 5 6 6 7 7 8 9 5 6 6 7 8 8 10 6 7 7 8 9 10 11 7 9 10 11 7 9 10 11

2.2 2.7 2.7 3.2 3.2 3.6 4.1 2.2 2.7 2.7 3.2 3.6 3.6 4.5 2.7 3.2 3.2 3.6 4.1 4.5 5.0 3.2 4.1 4.5 5.0 3.2 4.1 4.5 5.0

cu ft 0.7 0.7 0.7 0.8 0.8 1.0 1.4 0.8 0.8 0.8 0.9 0.9 1.1 1.4 1.5 1.5 1.5 2.0 2.5 2.5 2.7 2.0 2.5 2.5 2.7 2.5 2.7 2.7 3.0

chrome model # DTF1824-C DTF1830-C DTF1836-C DTF1842-C DTF1848-C DTF1860-C DTF1872-C DTF2124-C DTF2130-C DTF2136-C DTF2142-C DTF2148-C DTF2160-C DTF2172-C DTF2424-C DTF2430-C DTF2436-C DTF2442-C DTF2448-C DTF2460-C DTF2472-C DTF3036-C DTF3048-C DTF3060-C DTF3072-C DTF3636-C DTF3648-C n/a n/a

list 83 85 88 91 92 103 115 84 88 91 93 94 111 154 88 91 93 94 96 115 161 99 102 106 147 106 111 n/a n/a

EAGLEgard® model # list DTF1824-E 99 DTF1830-E 104 DTF1836-E 105 DTF1842-E 107 DTF1848-E 109 DTF1860-E 124 DTF1872-E 139 DTF2124-E 101 DTF2130-E 105 DTF2136-E 107 DTF2142-E 112 DTF2148-E 113 DTF2160-E 134 DTF2172-E 186 DTF2424-E 105 DTF2430-E 107 DTF2436-E 112 DTF2442-E 113 DTF2448-E 115 DTF2460-E 139 DTF2472-E 194 DTF3036-E 118 DTF3048-E 124 DTF3060-E 147 DTF3072-E 207 DTF3636-E 129 DTF3648-E 134 DTF3660-E 160 DTF3672-E 223

stainless steel model # list DTF1824-S 215 DTF1830-S 224 DTF1836-S 228 DTF1842-S 232 DTF1848-S 238 DTF1860-S 274 DTF1872-S 302 DTF2124-S 218 DTF2130-S 224 DTF2136-S 227 DTF2142-S 239 DTF2148-S 241 DTF2160-S 281 DTF2172-S 311 DTF2424-S 224 DTF2430-S 229 DTF2436-S 238 DTF2442-S 246 DTF2448-S 249 DTF2460-S 289 DTF2472-S 319 DTF3036-S 289 DTF3048-S 302 DTF3060-S 347 DTF3072-S 383 DTF3636-S 298 DTF3648-S 308 DTF3660-S 353 DTF3672-S 392

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


SHELVING / RETAIL DISPLAY Catalog Section 1

3-Sided Channel Frames

Freight class is 70.0.

see spec sheet EG01.03B

in.

18˝ width (457mm)

21˝ width (533mm)

24˝ width (610mm)

30˝ width (762mm)

36˝ width (914mm)

length mm

24˝ 30˝ 36˝ 42˝ 48˝ 60˝ 72˝ 24˝ 30˝ 36˝ 42˝ 48˝ 60˝ 72˝ 24˝ 30˝ 36˝ 42˝ 48˝ 60˝ 72˝ 36˝ 48˝ 60˝ 72˝ 36˝ 48˝ 60˝ 72˝

610 762 914 1067 1219 1524 1829 610 762 914 1067 1219 1524 1829 610 762 914 1067 1219 1524 1829 914 1219 1524 1829 914 1219 1524 1829

weight lbs. kg 5 6 6 7 7 8 9 5 6 6 7 8 8 10 6 7 7 8 9 10 11 7 9 10 11 7 9 10 11

2.2 2.7 2.7 3.2 3.2 3.6 4.1 2.2 2.7 2.7 3.2 3.6 3.6 4.5 2.7 3.2 3.2 3.6 4.1 4.5 5.0 3.2 4.1 4.5 5.0 3.2 4.1 4.5 5.0

cu ft 0.7 0.7 0.7 0.8 0.8 1.0 1.4 0.8 0.8 0.8 0.9 0.9 1.1 1.4 1.5 1.5 1.5 2.0 2.5 2.5 2.7 2.0 2.5 2.5 2.7 2.5 2.7 2.7 3.0

(•) MTS (made to stock) / ( ) MTO (made to order)

chrome model # CF1824-C CF1830-C CF1836-C CF1842-C CF1848-C CF1860-C CF1872-C CF2124-C CF2130-C CF2136-C CF2142-C CF2148-C CF2160-C CF2172-C CF2424-C CF2430-C CF2436-C CF2442-C CF2448-C • CF2460-C • CF2472-C CF3036-C CF3048-C CF3060-C CF3072-C CF3636-C CF3648-C n/a n/a

list 77 79 80 82 83 95 105 78 80 82 84 85 101 141 80 82 84 85 88 105 147 91 94 98 136 98 101 n/a n/a

EAGLEgard® model # list CF1824-E 91 CF1830-E 96 CF1836-E 97 CF1842-E 99 CF1848-E 100 CF1860-E 114 CF1872-E 128 CF2124-E 93 CF2130-E 97 CF2136-E 99 CF2142-E 102 CF2148-E 103 CF2160-E 122 CF2172-E 172 CF2424-E 97 CF2430-E 99 CF2436-E 102 CF2442-E 103 CF2448-E • 105 CF2460-E • 128 CF2472-E 178 CF3036-E 109 CF3048-E 114 CF3060-E 136 CF3072-E 189 CF3636-E 119 CF3648-E 122 CF3660-E 146 CF3672-E 205

stainless steel model # list CF1824-S 202 CF1830-S 224 CF1836-S 228 CF1842-S 233 CF1848-S 237 CF1860-S 274 CF1872-S 301 CF2124-S 216 CF2130-S 224 CF2136-S 227 CF2142-S 238 CF2148-S 240 CF2160-S 282 CF2172-S 312 CF2424-S 224 CF2430-S 232 CF2436-S 237 CF2442-S 246 CF2448-S 249 CF2460-S 288 CF2472-S 319 CF3036-S 288 CF3048-S 301 CF3060-S 347 CF3072-S 383 CF3636-S 298 CF3648-S 311 CF3660-S 353 CF3672-S 393

Handles for Caster Carts FEATURES:

see spec sheet EG01.03B

width in. mm

weight lbs. kg

14˝ 18˝ 21˝ 24˝ 30˝ 36˝

1.7 1.9 2.1 2.3 2.6 3.0

356 457 533 610 762 914

0.8 0.9 1.0 1.1 1.2 1.4

Push Handles

Extended Push Handles

Easily slips over posts.

Designed to prevent damage to knuckles.

cubic chrome feet model # list 0.1 PH14-C 54 0.1 PH18-C 55 0.1 PH21-C 56 0.2 PH24-C • 56 0.3 PH30-C 57 0.3 PH36-C 58

stainless steel model # list PH14-S 74 PH18-S 83 PH21-S 93 PH24-S 100 PH30-S 128 PH36-S 142

cubic feet 0.2 0.3 0.3 0.4 0.5 0.5

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

chrome model # list EH14-C 96 EH18-C 99 EH21-C 100 EH24-C 101 EH30-C 103 EH36-C 104

• Fits unit widths only.

stainless steel model # list EH14-S 115 EH18-S 127 EH21-S 134 EH24-S 143 EH30-S 168 EH36-S 183

55


SHELVING / RETAIL DISPLAY Catalog Section 1 Patented QuadTruss® Design (Patent #5,390,803)

makes shelves up to 25% stronger and provides a retaining ledge for increased strength and product retention.

UNIQUE ROLLER DESIGN • Patent #5,680,942. • Makes moving mobile units easy. • Eliminates binding due to uneven floors. • Rollers also support track. SHELVES sold separately (see page 7) are available in EAGLEbrite® zinc, chrome, VALU-MASTER® pewter gray epoxy, EAGLEgard® green epoxy, and stainless steel finish. Maximum shelf length should not exceed 60˝ (1524mm).

Overhead Track High-Density Storage System

Components Shelves sold separately (see page 7). D open aisle—30˝ to 36˝ (762 to 914mm) is recommended E stationary mid unit (optional—use same model # as stationary end unit kit)

A front & rear overhead tracks B stationary end units C mobile units

Stationary End / Intermediate Unit Kits see spec sheet • • • • •

EG01.18

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Posts. Hardware necessary for connecting stationary end units to track. One kit is required for each end unit. End units must be anchored to the floor to prevent movement. Priced per kit.

Note:

Shelves sold separately see page 7.

86˝ (2184mm) Posts

74˝ (1880mm) Posts weight lbs. kg 17

56

7.7

cu ft 0.1

®

EAGLEbrite model # list EP74-Z • 162

weight cu chrome EAGLEgard model # list model # list lbs. kg ft 9.5 0.1 EP74-C • 173 EP74-E • 189 21 ®

EAGLEbrite® model # list EP86-Z 168

chrome EAGLEgard® model # list model # list EP86-C 183 EP86-E 201

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


SHELVING / RETAIL DISPLAY Catalog Section 1

Mobile Unit Kits

WEIGHT CAPACITY:

see spec sheet • • • • •

• 900 lbs. (408 kg).

EG01.18

Freight class is 70.0.

Posts. Casters are 5˝ x 11⁄2˝ (127 x 38mm) polymer. All parts and necessary hardware. One kit is required for each mobile unit. Priced per kit.

Note:

(•) MTS (made to stock) / ( ) MTO (made to order)

Shelves sold separately see page 7.

74˝ (1880mm) Height* width cu in. mm ft 18˝ 21˝ 24˝ 30˝ 36˝

457 533 610 762 914

0.1 0.1 0.1 0.1 0.1

weight EAGLEbrite® lbs. kg model # list 33 15.0 MUK18-Z 380 34 15.4 MUK21-Z 395 35 15.9 MUK24-Z 399 35 15.9 MUK30-Z 406 36 16.3 MUK36-Z 415

chrome model # MUK18-C • MUK21-C MUK24-C • MUK30-C MUK36-C

list 422 434 441 451 472

EAGLEgard® model # list MUK18-E 671 MUK21-E 680 MUK24-E • 689 MUK30-E 708 MUK36-E 729

list 440 451 459 469 491

EAGLEgard® model # list MUK18-E86 681 MUK21-E86 699 MUK24-E86 715 MUK30-E86 734 MUK36-E86 752

* Casters are included in post height.

86˝ (2184mm) Height* width cu in. mm ft 18˝ 21˝ 24˝ 30˝ 36˝

457 533 610 762 914

0.1 0.1 0.1 0.1 0.1

weight EAGLEbrite® lbs. kg model # list 6713716.8 MUK18-Z86 396 6803817.2 MUK21-Z86 409 39 17.6 MUK24-Z86 416 39 17.6 MUK30-Z86 422 40 18.1 MUK36-Z86 429

chrome model # MUK18-C86 MUK21-C86 MUK24-C86 MUK30-C86 MUK36-C86

* Casters are included in post height.

Overhead Track Kits

PACKAGING • Kits 13´(3962mm) and longer are wood-crated.

see spec sheet

EG01.18 Freight class is 70.0.

• All necessary sections of front and rear tracks for assembling track lengths of 6´to 21´(1829 to 6401mm), plus all hardware. Note:

(•) MTS (made to stock) / ( ) MTO (made to order)

Any kits 9´(2743mm) or longer include two or more front and rear track sections, with joiner pieces and all hardware. A mid-stationary unit is recommended on lengths of over 30´(9144mm).

length ft. mm 6´ 1829 7´ 2134 8´ 2438 9´ 2743 10´ 3048

weight lbs. 18 21 24 27 30

kg 8.2 9.5 10.9 12.2 13.6

length

cu ft 1.8 2.1 2.4 2.7 3.0

model #

list

OHT-6 OHT-7 OHT-8 OHT-9 OHT-10

416 463 698 759 821

ft. 11´ 12´ 13´ 14´ 15´

mm 3353 3658 3962 4267 4572

weight lbs. 33 36 39 42 45

kg 15.0 16.3 17.7 19.1 20.4

cu ft 3.3 3.6 3.9 4.2 4.5

length model #

list

OHT-11 OHT-12 OHT-13 OHT-14 OHT-15

883 946 1005 1062 1291

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

ft. 16´ 17´ 18´ 19´ 20´ 21´

mm 4877 5181 5486 5791 6096 6401

weight lbs. 48 51 54 57 60 63

kg 21.8 23.1 24.5 25.9 27.2 28.6

cu ft 4.8 5.1 5.4 5.7 6.0 6.3

model #

OHT-16 OHT-17 • OHT-18 OHT-19 OHT-20 OHT-21

list

1353 1343 1477 1537 1594 1655

57


SHELVING / RETAIL DISPLAY Catalog Section 1

Single-Deep Floor-Trak® High-Density Storage System see spec sheet

EG01.39

FEATURES:

• Non-corrosive track constructed of anodized aluminum. • The system is ADA-compliant. • Simple and easy to install. • Easy to add on additional units. • Open construction allows for the use of cart covers when required. • Industrial-type, hardened steel bearings allow loaded units to glide effortlessly over the track. Note:

Unit will tilt if not loaded properly. LOAD BOTTOM FIRST!

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

track end stop skate

dimensions of floor track

single deep unit shown assembled with wire starter unit

Single-Deep Skate Kits

Single-Deep Floor Track Kits

• • • •

Two skates. All necessary parts and hardware. One kit is required for each mobile unit. Skates are aircraft-quality aluminum with stainless steel inserts and hardened steel ball bearings. • Weight capacity of 2000 lbs. (907.2 kg) per mobile section.

• Pair of aluminum tracks with plastic end stops. • All hardware included.

Note: Shelves see page 7 and posts sold separately see page 10.

6´ 7´ 8´ 9´ 10´ 11´ 12´ 13´ 14´ 15´ 16´ 17´ 18´ 19´ 20´ 21´

in. 18˝ 21˝ 24˝ 30˝ 36˝

width weight mm lbs. kg 457 533 610 762 914

6 7 7 8 10

cu ft

2.7 3.2 3.2 3.6 4.5

0.09 0.11 0.23 0.15 0.18

model # SDSK-18 SDSK-21 SDSK-24 SDSK-30 SDSK-36

Note:

ft.

list 591 612 638 712 941

Bumper Brackets for use with Floor-Trak® Skate Kits Stainless steel. Set of four. model # SDSKATB-S

list 263

Not recommended to piece tracks together. Order length needed. Custom lengths available. Consult factory.

length mm 1829 2134 2438 2743 3048 3353 3658 3962 4267 4572 4877 5181 5486 5791 6096 6401

weight lbs. kg 5 5 6 7 8 8 9 10 11 11 12 13 14 14 15 16

2.3 2.3 2.7 3.2 3.6 3.6 4.1 4.5 5.0 5.0 5.4 5.8 6.4 6.4 6.8 6.3

cu ft 0.06 0.07 0.08 0.09 0.10 0.11 0.12 0.13 0.14 0.15 0.16 0.17 0.18 0.19 0.20 0.21

model # SDFT-6 SDFT-7 SDFT-8 SDFT-9 SDFT-10 SDFT-11 SDFT-12 SDFT-13 SDFT-14 SDFT-15 SDFT-16 SDFT-17 SDFT-18 SDFT-19 SDFT-20 SDFT-21

…sold individually (hardware included) model # SKATB-S

list 66

Optional Shim Kits

Optional Foot Brake Kit

Accommodates uneven floors. model # 912991

58

list 161

Mounts onto frontmost skate. model # MFBK-S

list 101 100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

list 599 679 760 840 920 1001 1081 1162 1242 1323 1403 1483 1564 1644 1724 1804


SHELVING / RETAIL DISPLAY Catalog Section 1

Double-Deep Floor-Trak® High-Density Storage System see spec sheet

Note:

Unit will tilt if not loaded properly. LOAD BOTTOM FIRST!

Freight class is 70.0.

EG01.39

(•) MTS (made to stock) / ( ) MTO (made to order)

Bumper Brackets for use with Floor-Trak® Skate Kits Stainless steel. Set of six. model # DDSKATB-S

list 374

…sold individually (hardware included) model # SKATB-S track

list 66

end stop

skate

double deep unit shown assembled with wire starter unit

Double-Deep Skate Kits

dimensions of

• • • •

Three skates. floor track All necessary parts and hardware. One kit is required for each mobile unit. Skates are aircraft-quality aluminum with stainless steel inserts and hardened steel ball bearings. • Weight capacity of 1500 lbs. (680.4 kg) per mobile section —3000 lbs (1361 kg) at middle skate. Note:

Double-Deep Floor Track Kits • Three aluminum tracks with plastic end stops. • All hardware included. Note: Not recommended to piece tracks together. Order length needed. Custom lengths available. Consult factory. Double-deep units should not exceed depths of 10 feet (3048mm).

ft.

6´ 7´ 8´ 9´ 10´ 11´ 12´ 13´ 14´ 15´ 16´ 17´ 18´ 19´ 20´ 21´

Shelves see page 7 and posts sold separately see page 10.

in.

width mm

18˝ 21˝ 24˝ 30˝ 36˝

457 533 610 762 914

weight lbs. kg

cu ft

10 11 12 14 16

0.14 0.16 0.18 0.23 0.27

4.5 5.0 5.4 6.4 7.3

Optional Shim Kits

list 1073 1103 1143 1255 1598

Optional Foot Brake Kit

Accommodates uneven floors. model # 912991

model # DDSK-18 DDSK-21 DDSK-24 DDSK-30 DDSK-36

Mounts onto frontmost skate.

list 161

model # MFBK-S

length mm

list 101

1829 2134 2438 2743 3048 3353 3658 3962 4267 4572 4877 5181 5486 5791 6096 6401

weight lbs. kg 7 3.2 8 3.6 9 4.1 10 4.5 13 5.8 14 6.4 15 6.8 16 7.3 16 7.3 17 7.7 18 8.2 19 8.6 21 9.5 22 10.0 23 10.4 24 10.9

cu ft 0.09 0.11 0.12 0.14 0.16 0.17 0.18 0.20 0.21 0.23 0.24 0.26 0.27 0.29 0.30 0.32

model # DDFT-6 DDFT-7 DDFT-8 DDFT-9 DDFT-10 DDFT-11 DDFT-12 DDFT-13 DDFT-14 DDFT-15 DDFT-16 DDFT-17 DDFT-18 DDFT-19 DDFT-20 DDFT-21

list 899 1019 1139 1260 1380 1501 1622 1743 1863 1984 2104 2225 2346 2466 2587 2707

Inside Posts for Double-Deep Units • Each double-deep unit requires a set of four ‘inside’ posts (listed below) along with four standard stationary posts. Note: See page 10 for standard stationary posts and page 7 for wire shelves (sold separately).

Sets of four 74˝ (1880mm) posts weight lbs. kg

cu ft

®

Sets of four 86˝ (2184mm) posts ®

EAGLEbrite chrome EAGLEgard model # list model # list model # list TEP74-Z 162 TEP74-C 173 TEP74-E 189

weight lbs. kg

cu ft

EAGLEbrite® chrome EAGLEgard® model # list model # list model # list TEP86-Z 168 TEP86-C 183 TEP86-E 201

17 7.7 0.1 21 9.5 0.1 IMPORTANT: Maximum post height per skate size: 18˝-, 21˝-, and 24˝-wide skates on 74˝ post height or less; 30˝- and 36˝-wide skates on 86˝ post height or less. 100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

59


SHELVING / RETAIL DISPLAY Catalog Section 1

Aluminum Beer Keg Racks see spec sheet

EG01.38

FEATURES:

• Adjustable cooler shelving for quarter- or half-kegs. • Compatible with any wet or dry storage environment. • Resists corrosion and rust. • Racks feature three shelves. – two of which are heavy duty for kegs. – third (usually on top) is for general storage. • Shelf corners features a heavy-duty extruded aluminum collar with set screw. • Shelves are adjustable in 2˝ (51mm) increments. • Shipped knocked down. • Easy to assemble. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

3-Sided Frames for Aluminum Beer Keg Racks width x length x height in. mm 18˝ x 42˝ x 76˝ 18˝ x 60˝ x 76˝ 18˝ x 80˝ x 76˝ 18˝ x 93˝ x 76˝

weight keg cu lb. kg capacity ft

457 x 1067 x 1930 457 x 1524 x 1930 457 x 2032 x 1930 457 x 2362 x 1930

41 64 78 93

18.6 29.0 35.4 42.2

4 6 8 10

model # KR1842A KR1860A • KR1880A • KR1893A *

3.9 5.6 7.5 8.7

list 723 972 1119 1333

length in. mm 42˝ 18˝ 60˝ width 80˝ (457mm) 93˝

1067 1524 2032 2362

weight lb. kg 5 8 9 10

2.3 3.6 4.1 4.5

model # list KRB1842A 98 KRB1860A 113 KRB1880A 120 KRB1893A 143

* 93˝ (2362mm) long units come with six posts.

Heavy Duty Shelves for Aluminum Beer Keg Racks • Sold individually.

18˝ width (457mm)

length in. mm

weight lb. kg

42˝ 60˝ 80˝ 93˝

12 15 19 23

1067 1524 2032 2362

5.4 6.8 8.6 10.4

keg cu capacity ft 2 3 4 5

1.3 1.8 2.5 2.9

model # KRS1842A KRS1860A KRS1880A KRS1893A

Posts for Aluminum Beer Keg Racks

Freight class is 50.0.

• 15⁄16˝ (33mm) diameter, marked in 2˝ (51mm) increments. • Sold individually. height in. mm

weight lb. kg

12˝ 34˝ 48˝ 54˝ 68˝ 72˝ 76˝ 84˝

0.6 2.0 2.5 3.0 3.5 3.5 4.0 4.5

60

305 864 1219 1372 1727 1829 1930 2134

0.3 0.9 1.1 1.4 1.6 1.6 1.8 2.0

cubic feet model # 0.01 KP12-A 0.04 KP34-A 0.06 KP48-A 0.07 KP54-A 0.09 KP68-A 0.09 KP72-A 0.10 KP76-A 0.11 KP84-A

list 186 292 353 418

(•) MTS (made to stock) / ( ) MTO (made to order)

list 19 28 29 33 40 43 45 52

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


SHELVING / RETAIL DISPLAY Catalog Section 1 Show-off your merchandise when you use our wire display shelving units in various configurations highlighted by our brilliant finishes. • • • •

Open wire grid shelf allows maximum merchandise visibility. Easy to assemble. Shelf spacing adjusts in seconds. Choose from our custom and standard colors.

Decorative Shelves see spec sheet EG01.34A INCLUDES:

(Patent #5,390,803)

Patented QuadTruss® Design makes shelves up to 25% stronger and provides a retaining ledge for increased strength and product retention.

• Four plastic split sleeves per shelf ordered, packaged four per bag. • Black sleeves except white shelves. • White shelves come with white sleeves. Note: To order custom decorative colors, add suffix “BM” (black matte), “L” (lilac), “M” (maroon), “SV” (silver vein), “SA” (sapphire), “SG” (smoked glass), “T” (teal), “GV” (gold vein), “CV” (copper vein), or “RU” (ruby) to the desired shelf size model number when ordering. Call for custom decorative color pricing.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

length in. mm

14˝ width (356mm)

18˝ width (457mm)

Add a ! Sp la sh o f C o lo r 21˝ width (533mm)

24˝ width (610mm)

24˝ 30˝ 36˝ 42˝ 48˝ 60˝ 72˝ 24˝ 30˝ 36˝ 42˝ 48˝ 54˝ 60˝ 72˝ 24˝ 30˝ 36˝ 42˝ 48˝ 54˝ 60˝ 72˝ 24˝ 30˝ 36˝ 42˝ 48˝ 54˝ 60˝ 72˝

610 762 914 1067 1219 1524 1829 610 762 914 1067 1219 1372 1524 1829 610 762 914 1067 1219 1372 1524 1829 610 762 914 1067 1219 1372 1524 1829

weight cubic red white lbs. kg feet model # list model # list 6 2.9 0.5 1424R • 58 1424W • 58 7 3.2 0.5 1430R 61 1430W 61 8 3.6 0.5 1436R 63 1436W 63 9 3.9 0.7 1442R 73 1442W 73 10 4.4 0.7 1448R 75 1448W 75 14 6.4 0.9 1460R 84 1460W 84 17 7.7 1.1 1472R 98 1472W 98 7 3.2 0.7 1824R 63 1824W 63 8 3.6 0.7 1830R 66 1830W 66 9 3.9 0.7 1836R 68 1836W • 68 11 5.0 0.9 1842R 79 1842W 79 12 5.5 0.9 1848R 81 1848W 81 15 6.8 1.2 1854R 93 1854W 93 17 7.7 1.2 1860R 96 1860W 96 20 9.1 1.3 1872R 114 1872W 114 8 3.7 0.7 2124R 75 2124W 75 9 4.1 0.7 2130R 78 2130W 78 11 5.0 0.8 2136R 80 2136W 80 12 5.5 1.1 2142R 91 2142W 91 14 6.4 1.1 2148R 93 2148W 93 16 7.3 1.3 2154R 106 2154W 106 18 8.2 1.3 2160R 108 2160W 108 24 10.9 1.4 2172R 132 2172W 132 9 4.1 0.8 2424R 79 2424W 79 11 5.0 0.8 2430R 81 2430W 81 13 5.9 0.8 2436R • 84 2436W 84 15 6.8 1.0 2442R 99 2442W 99 16 7.3 1.2 2448R 102 2448W 102 19 8.6 1.5 2454R 118 2454W 118 21 9.5 1.5 2460R 120 2460W 120 26 11.8 1.6 2472R 143 2472W 143

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

black chrome model # list model # list 1424BL • 58 1424C • 54 1430BL 61 1430C • 57 1436BL • 63 1436C • 63 1442BL 73 1442C • 73 1448BL • 75 1448C • 75 1460BL • 84 1460C • 84 1472BL • 98 1472C • 98 1824BL • 63 1824C • 63 1830BL 66 1830C • 66 1836BL • 68 1836C • 68 1842BL • 79 1842C • 79 1848BL • 81 1848C • 81 1854BL 93 1854C • 93 1860BL • 96 1860C • 96 1872BL • 114 1872C • 114 2124BL 75 2124C • 72 2130BL 78 2130C • 78 2136BL • 80 2136C • 80 2142BL 91 2142C • 91 2148BL • 93 2148C • 93 2154BL 106 2154C • 106 2160BL 108 2160C • 108 2172BL 132 2172C • 132 2424BL • 79 2424C • 79 2430BL 81 2430C • 81 2436BL • 84 2436C • 84 2442BL 99 2442C • 99 2448BL • 102 2448C • 102 2454BL 118 2454C • 118 2460BL • 120 2460C • 120 2472BL • 143 2472C • 143

61


SHELVING / RETAIL DISPLAY Catalog Section 1

STAND-OUTS™ Decorative Shelving Accessories see spec sheets EG01.34A

Freight class is 70.0.

EG01.34B

Decorative Casters

(•) MTS (made to stock) / ( ) MTO (made to order)

Decorative Foot Plate

• For use with Stationary Posts (page 63). wheel diameter in. mm

type swivel swivel/brake swivel swivel/brake

23⁄8˝ 23⁄8˝ 4˝ 4˝

60 60 102 102

weight lbs. kg 0.4 0.4 0.5 0.5

0.2 0.2 0.2 0.2

cubic feet 0.03 0.03 0.03 0.03

diameter in. mm model # A208903 A208904 A208905 A208906

list 14 15 24 31

51

model # A204942

Inlays • Fits between posts and levels with top of shelf edge.

Black and White Reversible. Priced per inlay. 1⁄8˝-thick.

14˝ width (356mm)

18˝ width (457mm)

21˝ width (533mm)

24˝ width (610mm)

30˝ width (762mm)

length in. mm

weight** lbs. kg

cu ft

30˝ 36˝ 48˝ 60˝ 36˝ 48˝ 60˝ 72˝ 36˝ 48˝ 60˝ 72˝ 24˝ 30˝ 36˝ 48˝ 54˝ 60˝ 72˝ 60˝ 72˝

1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.1 1.2 1.3 1.4 1.0 1.0 1.0 1.1 1.3 1.4 1.8 2.0 2.5

0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.3 0.3 0.3 0.2 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3

762 914 1219 1524 914 1219 1524 1829 914 1219 1524 1829 610 762 914 1219 1372 1524 1829 1524 1829

0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.6 0.6 0.8 0.9 1.1

model # DSI-1430 DSI-1436 DSI-1448 DSI-1460 DSI-1836 DSI-1848 DSI-1860 DSI-1872 DSI-2136 DSI-2148 DSI-2160 DSI-2172 DSI-2424 DSI-2430 DSI-2436 DSI-2448 DSI-2454 DSI-2460 DSI-2472 DSI-3060 DSI-3072

list 46 48 55 61 54 61 68 76 59 66 77 81 51 58 61 71 79 85 92 88 98

Clear * Priced per pack of four. 1⁄32˝-thick. model # CSI-1430 CSI-1436 CSI-1448 • CSI-1460 CSI-1836 • CSI-1848 CSI-1860 CSI-1872 CSI-2136 CSI-2148 CSI-2160 CSI-2172 CSI-2424 CSI-2430 CSI-2436 CSI-2448 CSI-2454 CSI-2460 CSI-2472 CSI-3060 CSI-3072

list 67 72 86 112 75 89 103 118 79 93 105 120 68 72 82 96 106 121 133 191 195

* Actual width of CSI Inlays is minus 11⁄4˝ (32mm). ** Weight shown per inlay.

Display Arms • For everything from pots to purses; perfect for ‘quick-pick’ items. • Easily attaches to standard posts. length in. mm

weight lbs. kg

20

62

25

9

EAGLEbrite® model # list DA6-Z 23

red model # DA6-R

white black chrome list model # list model # list model # list 23 DA6-W 23 DA6-BL 23 DA6-C 23 100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

list 7


SHELVING / RETAIL DISPLAY Catalog Section 1

Posts

Freight class is 50.0.

see spec sheet EG01.34A

(•) MTS (made to stock) / ( ) MTO (made to order)

For Mobile Applications

For Stationary Applications height in. mm

weight lbs. kg

cu ft

7˝ 14˝ 33˝ 54˝ 63˝ 74˝ 86˝

0.8 1.0 2.0 3.0 3.5 4.0 5.0

0.1 0.1 0.1 0.1 0.3 0.5 0.8

178 356 838 1372 1600 1880 2184

0.4 0.5 0.9 1.4 1.8 1.8 2.3

Model # white black P7-W P7-BL P14-W P14-BL • P33-W P33-BL • P54-W P54-BL • P63-W P63-BL • P74-W P74-BL • P86-W P86-BL •

red P7-R P14-R P33-R P54-R P63-R P74-R P86-R

chrome P7-C P14-C • P33-C • P54-C • P63-C • P74-C • P86-C •

list 13 16 19 23 24 27 33

Model # white black CP7-W CP7-BL CP14-W CP14-BL CP33-W CP33-BL CP54-W CP54-BL • CP63-W CP63-BL CP74-W CP74-BL • CP86-W CP86-BL

red CP7-R CP14-R CP33-R CP54-R CP63-R CP74-R CP86-R

Ledges

list 13 16 19 23 24 27 33

Freight class is 70.0.

see spec sheet EG01.34A

(•) MTS (made to stock) / ( ) MTO (made to order)

1˝ (25mm) ledges length in. mm

cu weight ft lbs. kg

14˝ 18˝ 21˝ 24˝ 30˝ 36˝ 42˝ 48˝ 54˝ 60˝ 72˝

0.2 0.3 0.3 0.3 0.5 0.6 0.6 0.7 0.8 0.8 1.0

356 457 533 610 762 914 1067 1219 1372 1524 1829

chrome CP7-C CP14-C CP33-C • CP54-C • CP63-C • CP74-C • CP86-C •

0.2 0.3 0.4 0.5 0.7 0.9 1.1 1.3 1.5 1.7 2.1

0.1 0.1 0.2 0.2 0.3 0.4 0.5 0.6 0.7 0.8 1.0

red L14-1R L18-1R L21-1R L24-1R L30-1R L36-1R L42-1R L48-1R L54-1R L60-1R L72-1R

Model numbers white black L14-1W L14-1BL L18-1W L18-1BL L21-1W L21-1BL L24-1W L24-1BL L30-1W L30-1BL L36-1W L36-1BL L42-1W L42-1BL L48-1W L48-1BL L54-1W L54-1BL L60-1W L60-1BL L72-1W L72-1BL

4˝ (102mm) ledges chrome list L14-1C 16 L18-1C 17 L21-1C 19 L24-1C • 22 L30-1C 23 L36-1C • 25 L42-1C 28 L48-1C • 29 L54-1C • 31 L60-1C • 34 L72-1C 39

weight lbs. kg 0.8 0.9 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6

Shelf Dividers

0.4 0.4 0.5 0.6 0.6 0.7 0.8 0.9 1.0 1.1 1.2

red L14-4R L18-4R L21-4R L24-4R L30-4R L36-4R L42-4R L48-4R L54-4R L60-4R L72-4R

Model numbers white black L14-4W L14-4BL L18-4W L18-4BL L21-4W L21-4BL L24-4W L24-4BL L30-4W L30-4BL L36-4W L36-4BL • L42-4W L42-4BL L48-4W L48-4BL • L54-4W L54-4BL L60-4W L60-4BL L72-4W L72-4BL

chrome L14-4C • L18-4C • L21-4C • L24-4C • L30-4C • L36-4C • L42-4C • L48-4C • L54-4C L60-4C • L72-4C •

list 19 22 23 25 31 36 39 42 43 46 55

Freight class is 70.0.

see spec sheet EG01.34A

(•) MTS (made to stock) / ( ) MTO (made to order)

Organize shelf contents with these snap-on dividers! length weight in. mm lbs. kg 14˝ 18˝ 21˝ 24˝ 30˝ 36˝

356 457 533 610 762 914

1.0 1.3 1.5 1.8 2.2 2.7

0.5 0.6 0.7 0.8 1.0 1.2

cubic feet 0.6 0.6 0.8 1.0 1.2 1.4

red model # list SD14-R 23 SD18-R 31 SD21-R 34 SD24-R 37 SD30-R 46 SD36-R 58

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

white model # list SD14-W 23 SD18-W 31 SD21-W 34 SD24-W 37 SD30-W 46 SD36-W 58

black chrome model # list model # SD14-BL 23 SD14-C • SD18-BL 31 SD18-C • SD21-BL 34 SD21-C • SD24-BL 37 SD24-C • SD30-BL 46 SD30-C SD36-BL 58 SD36-C

list 24 33 36 39 48 61

63


SHELVING / RETAIL DISPLAY Catalog Section 1

Cantilever Shelves see spec sheet EG01.34B

FEATURES:

• 1˝ (25mm) wraparound ledge. • 12˝ (305mm) wide shelves. NOTE: When ordering back posts, confirm with customer service, the correct post height to accommodate these shelves.

Ideal for adding extra storage above an existing shelving unit.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Packaged two per box.

12˝ width (305mm)

length in. mm

weight lbs. kg

cu ft

24˝ 30˝ 36˝ 42˝ 48˝ 54˝ 60˝

4 5 6 7 8 8 9

0.5 0.8 0.8 0.9 1.0 1.0 1.0

610 762 914 1067 1219 1371 1524

1.8 2.3 2.7 3.2 3.6 3.6 4.1

red model # list CS1224-R 59 CS1230-R 65 CS1236-R 74 CS1242-R 83 CS1248-R 85 CS1254-R 91 CS1260-R 98

white model # CS1224-W CS1230-W CS1236-W CS1242-W CS1248-W CS1254-W CS1260-W

Etagere Top

list 59 65 74 83 85 91 98

black model # list CS1224-BL 59 CS1230-BL 65 CS1236-BL 74 CS1242-BL 83 CS1248-BL 85 CS1254-BL 91 CS1260-BL 98

FEATURES:

see spec sheet EG01.34B

chrome model # CS1224-C CS1230-C CS1236-C CS1242-C CS1248-C • CS1254-C CS1260-C •

list 59 65 74 83 85 91 98

• Decorative top fits 24˝ (610mm) long shelving. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

length in. mm

weight lbs. kg

cu ft

24˝

1.5

1.3

305

0.7

red model # ET24-R

list 23

white model # list ET24-W 23

Hanger Rails

black model # ET24-BL

Freight class is 70.0.

Front-to-Back width in. mm

weight lbs. kg

cu ft

14˝ 18˝ 24˝ 30˝ 36˝

1.0 1.1 1.5 1.7 1.9

0.5 0.5 0.7 0.8 0.9

0.2 0.3 0.3 0.5 0.6

width in. mm

weight lbs. kg

cu ft

24˝ 30˝ 36˝ 42˝ 48˝ 54˝ 60˝ 66˝ 72˝

1.5 1.7 1.9 2.0 2.1 2.3 2.5 2.7 2.9

0.3 0.5 0.6 0.6 0.7 0.8 0.8 0.9 1.0

red model # list WR14-R 22 WR18-R 24 WR24-R 25 WR30-R 26 WR36-R 28

white model # WR14-W WR18-W WR24-W WR30-W WR36-W

list 22 24 25 26 28

black model # WR14-BL WR18-BL WR24-BL WR30-BL WR36-BL

list 22 25 25 26 28

chrome model # WR14-C WR18-C WR24-C WR30-C WR36-C

list 22 24 25 26 28

red model # list LR24-R 29 LR30-R 34 LR36-R 36 LR42-R 39 LR48-R 42 LR54-R 44 LR60-R 47 LR66-R 51 LR72-R 59

white model # LR24-W LR30-W LR36-W LR42-W LR48-W LR54-W LR60-W LR66-W LR72-W

list 29 34 36 39 42 44 47 51 59

black model # LR24-BL LR30-BL LR36-BL LR42-BL LR48-BL LR54-BL LR60-BL LR66-BL LR72-BL

list 29 34 36 39 42 44 47 51 59

chrome model # LR24-C LR30-C LR36-C LR42-C LR48-C LR54-C LR60-C LR66-C LR72-C

list 27 29 32 36 40 42 45 47 53

Left-to-Right

64

610 762 914 1067 1092 1372 1524 1676 1829

0.7 0.8 0.9 0.9 1.0 1.0 1.1 1.2 1.3

chrome model # list ET24-C 23

(•) MTS (made to stock) / ( ) MTO (made to order)

see spec sheet EG01.34B

356 457 610 762 914

list 23

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


SHELVING / RETAIL DISPLAY Catalog Section 1

Hooks

Freight class is 70.0.

see spec sheet EG01.34B

(•) MTS (made to stock) / ( ) MTO (made to order)

These snap-on hooks are heavy-gauge mild steel. length x width x height in. mm 11⁄4˝ x 41⁄4˝ x 3⁄8˝ 21⁄4˝ x 41⁄4˝ x 3⁄8˝ 21⁄4˝ x 41⁄4˝ x 3⁄8˝

32 x 108 x 10 57 x 108 x 10 57 x 108 x 10

weight lbs. kg

cu ft

description

0.3 0.3 0.3

0.1 0.1 0.1

small snap hook large snap hook large double hook

0.1 0.1 0.1

Front Case Merchandise Shelving see product announcement

EG8105

black model # list SH-BL 7 LH-BL 7 LDH-BL 12

chrome model # list SH-C 7 LH-C 7 LDH-C 12

small snap hook

large snap hook

large double snap hook

• 14˝ (356mm) standard height. • Set of four split sleeves per shelf.

NEW

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order) Note: To order unit with decorative casters, add suffix “-DC” to model number (example: FCM1448V-DC) and $21. To order unit with 18˝ (457mm)-high posts, add suffix “-18” to model number (example: HDFCM1424C-18). For units with cantilever overshelf, add $6. For units with two standard shelves, add $12.

(Patent #5,390,803)

Units with 12˝ (305mm)-wide Cantilever Overshelf length in. mm 24˝ 30˝ 14˝ 36˝ width 42˝ (356mm) 48˝ 54˝ 60˝

610 762 914 1067 1219 1372 1524

chrome model # FCM1424C FCM1430C FCM1436C FCM1442C FCM1448C FCM1454C FCM1460C

list 198 208 220 242 246 257 272

black model # FCM1424BL FCM1430BL FCM1436BL FCM1442BL FCM1448BL FCM1454BL FCM1460BL

list 198 208 220 242 246 257 272

red model # FCM1424R FCM1430R FCM1436R FCM1442R FCM1448R FCM1454R FCM1460R

list 198 208 220 242 246 257 272

VALU-MASTER® model # list FCM1424V 198 FCM1430V 208 FCM1436V 220 FCM1442V 242 FCM1448V 246 FCM1454V 257 FCM1460V 272

black model # HDFCM1424BL HDFCM1430BL HDFCM1436BL HDFCM1442BL HDFCM1448BL HDFCM1454BL HDFCM1460BL

list 177 186 196 216 220 229 242

red model # HDFCM1424R HDFCM1430R HDFCM1436R HDFCM1442R HDFCM1448R HDFCM1454R HDFCM1460R

list 177 186 196 216 220 229 242

VALU-MASTER® model # list HDFCM1424V 177 HDFCM1430V 186 HDFCM1436V 196 HDFCM1442V 216 HDFCM1448V 220 HDFCM1454V 229 HDFCM1460V 242

Valu-Gard® model # list FCM1424VG 198 FCM1430VG 208 FCM1436VG 220 FCM1442VG 242 FCM1448VG 246 FCM1454VG 257 FCM1460VG 272

white model # FCM1424W FCM1430W FCM1436W FCM1442W FCM1448W FCM1454W FCM1460W

list 198 208 220 242 246 257 272

white model # HDFCM1424W HDFCM1430W HDFCM1436W HDFCM1442W HDFCM1448W HDFCM1454W HDFCM1460W

list 177 186 196 216 220 229 242

Units with Two Standard Shelves length chrome in. mm model # 24˝ 610 HDFCM1424C 30˝ 762 HDFCM1430C 14˝ 36˝ 914 HDFCM1436C width 42˝ 1067 HDFCM1442C (356mm) 48˝ 1219 HDFCM1448C 54˝ 1372 HDFCM1454C 60˝ 1524 HDFCM1460C

list 177 186 196 216 220 229 242

Soft Goods Display see product announcement

EG8084

shown with optional hooks

INCLUDES:

• • • • • •

Valu-Gard® model # HDFCM1424VG HDFCM1430VG HDFCM1436VG HDFCM1442VG HDFCM1448VG HDFCM1454VG HDFCM1460VG

list 177 186 196 216 220 229 242

Standard adjustable feet. Standard color is red. Three shelves. Display arm. Two hanger rails. Two etagere tops used for signage. Freight class is 70.0.

Note: Options include the finish of your choice (see page 61 for custom colors and suffix codes), additional shelves and hooks, hanger tube, and decorative casters.

height

width

64˝(1626mm) 24˝ (610mm)

(•) MTS (made to stock) / ( ) MTO (made to order)

length weight cubic in. mm lbs. kg feet model # 24˝ 610 49 22.2 3 SDG2424R

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

list 373

65


SHELVING / RETAIL DISPLAY Catalog Section 1

Retail Display Workstation see product announcement

EG8082 FEATURES:

Available accessories: • Hanger rails • Display arms • Ledges • Dividers • Wire grids panels • Display hooks

SHELVES FEATURES:

Available options: • Additional wood tabletop choices. • Laminate top in lieu of wood. • Your custom logo displayed on wood caps. • European-style corners on wood caps. CONSULT FACTORY.

retail display workstation shown with optional accessories

width

in.

36˝ (914mm)

50˝

TABLE FEATURES:

110

• Two 18˝ (457mm) wide chrome wire undershelves and posts.

(•) MTS (made to stock) / ( ) MTO (made to order)

49.9

cu ft 6

Hardwood Top Wine Cart see spec sheet

• Four 14˝ (356mm) wide chrome shelves and posts.

Freight class is 70.0.

length weight mm lbs. kg 1270

• 63˝ (1600mm) high freestanding rear shelf unit. • 34˝ (864mm) high table, both capped with a hardwood finish.

EG01.48 INCLUDES:

model # RDW48CB

list 2832

• 13⁄4˝ (45mm) thick hardwood butcher block top. • Two chrome wine racks that can hold up to 18 bottles of wine. • Chrome wire shelf for storage.

Freight class is 70.0. (Patent #5,390,803)

(•) MTS (made to stock) / ( ) MTO (made to order)

Patented QuadTruss® Design makes shelves up to 25% stronger and provides a retaining ledge for increased strength and product retention.

width

18˝ (457mm)

Hardwood Top Demo Carts

length weight in. mm lbs. kg

cu ft

40˝

7.7

1016

69

31.3

NEW

see product announcement

EG8181 INCLUDES:

Smooth rolling casters for easy mobility. model # WR1840C

list 1022

• 13⁄4˝ (45mm) thick hardwood butcher block top. • Two wire undershelves, Valu-Master® gray finish. • 5˝ (127mm)-diameter decorative casters with donut bumpers. Note:

Available accessories include laminate top in lieu of wood, wire basket, and utility hooks. Options include the finish of your choice (see page 61 for custom colors and suffix codes).

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

height

34˝(864mm)

66

width

24˝ (610mm)

length in. mm

weight lbs. kg

36˝ 48˝ 60˝

61 73 91

914 1219 1524

27.7 33.1 41.3

cubic feet 4.0 5.0 6.0

model # DC2436V DC2448V DC2460V

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

list 1183 1232 1378


SHELVING / RETAIL DISPLAY Catalog Section 1

see product announcement

EG8085

FEATURES:

Designed for displaying items such as cookware, while allowing plenty of tabletop room for other display.

length weight in. mm lbs. kg

cu ft

12˝

1.2 A210115

305

15

6.8

Note: Options include the finish of your choice (see page 61 for custom colors and suffix codes), specified post height and additional brackets.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

pot/pan rack shown with additional bracket

width 12˝ (305mm)

33˝ (838mm) high. Chrome plated. Overall bracket length is 10˝ (254mm). Base is screwed into bottom of post. Entire assembly screws onto tabletop. Threaded stud welded into middle of 12˝ (305mm) square heavy gauge mild steel base. • Three display brackets with 8˝ (203mm) hexagon pad welded onto each bracket.

• • • • • •

Pot / Pan Rack

model #

list 88

Optional Freestanding Base for Pot / Pan Rack

Additional Bracket for Pot / Pan Rack

• Chrome. • 22˝ x 30˝ (559 x 762mm). • Available as an option to mounting.

• Chrome.

model # A210109

model # A210075

list 19

list 38

Secure Display Merchandiser see product announcement

EG8083 FEATURES:

• Posts and shelves are chrome plated. • Mylar inlay for top shelf. • Four 23⁄8˝ (60mm) decorative casters. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

height

width

40˝ (1016mm) 14˝ (356mm)

length weight in. mm lbs. kg 36˝

914 90

40.8

cubic feet model # 9 SDM1436C

list 1153

Options for Secure Display Merchandiser description center wire shelf polymer top natural wood top laminated top wall grid panel / sign holder

model # A1436C • SDM1436C-P SDM1436C-W SDM1436C-L SDMB36-C

list 71 113 90 361 190

secure display merchandiser shown with optional accessories

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

67


SHELVING / RETAIL DISPLAY Catalog Section 1

STAND-OUTS™ Gondola Wire Shelving see spec sheet

EG01.33

FEATURES:

• Use on all major shelving fixtures (see “Manufacturers’ ID numbers” box). • Pair of shelf brackets notched to securely hold the display shelf in place. Brackets can be positioned horizontally or slanted. • Available in 3´and 4´(914 and 1219mm) lengths. • Available in 18˝, 21˝, and 24˝ (457, 533, and 508mm) depths. • Choose from custom and standard colors.

Steps to follow when ordering: 1) Determine decorative color of gondola shelf. For standard colors, refer to chart (below). For custom colors, add suffix below to the desired model number when ordering: BM (black matte), L (lilac), M (maroon), SV (silver vein), SA (sapphire), SG (smoked glass), T (teal), GV (gold vein), CV (copper vein), RU (ruby) Call factory for pricing.

STAND SOLD SEPARATELY!

2) Determine correct brackets. Refer to the “Manufacturers’ ID numbers” table (left) and add the corresponding ID number to the end of the desired gondola shelf model number when ordering. Example: Model #HG1836BL-3 indicates an 18˝ x 36˝ (457 x 914mm) gondola shelf with black epoxy finish and brackets that fit a gondola made by Streater.

Manufacturers’ ID numbers 1-Kent 2-Universal Nolin 3-Streater

4-Madix/Lozier 5-Royston 6-PermaSteel

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Gondola Shelves - Patent # 6,345,795 • Price includes shelf with standard color and pair of shelf brackets.

18˝ width (457mm)

21˝ width (533mm)

24˝ width (610mm)

length in. mm

weight lbs. kg

cu ft

36˝ 48˝ 36˝ 48˝ 36˝ 48˝

12 15 14 17 16 19

0.7 0.9 0.8 1.1 0.8 1.2

914 1219 914 1219 914 1219

5.8 6.8 6.4 7.7 7.3 8.6

red model # list HG1836R 84 HG1848R 98 HG2136R 91 HG2148R 103 HG2436R 96 HG2448R 109

white model # list HG1836W 84 HG1848W 98 HG2136W 91 HG2148W 103 HG2436W 96 HG2448W 109

black model # list HG1836BL 84 HG1848BL 98 HG2136BL 91 HG2148BL 103 HG2436BL 96 HG2448BL 109

chrome model # list HG1836C 84 HG1848C 98 HG2136C 91 HG2148C 103 HG2436C 96 HG2448C 109

gondola shelf and bracket

Replacement Brackets - Patent # D 435,787 • Sold in pairs. • Order replacement brackets to utilize standard shelves in different gondola systems. length in. mm

weight lbs. kg

cu ft

18˝ 21˝ 24˝

4.8 5.3 5.8

1.0 1.0 1.0

457 533 610

2.2 2.4 2.6

Kent model # HGK18 HGK21 HGK24

U. Nolin list model # list 29 HGU18 29 34 HGU21 34 40 HGU24 40

Streater model # list HGS18 29 HGS21 34 HGS24 40

Madix/Lozier model # list HGML18 29 HGML21 34 HGML24 40

Royston model # list HGR18 29 HGR21 34 HGR24 40

PermaSteel model # list HGP18 29 HGP21 34 HGP24 40

Wall Standards • Use for mounting directly to walls instead of gondolas, if desired. • Sold and priced individually. • 12 gauge zinc plated mild steel. Note:

Shelving used only with Universal Nolin (suffix “-2”) will fit wall standards.

height in. mm

weight lbs. kg

cu ft

24˝ 36˝ 48˝

3.0 4.5 6.0

0.1 0.1 0.1

68

610 914 1219

1.4 2.0 2.7

model # list NUR24 27 NUR36 29 NUR48 31

wall standard shown with Universal Nolin gondola bracket

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


SHELVING / RETAIL DISPLAY Catalog Section 1

Freestanding Gondola Inset Adjustable Wire Shelving see spec sheet

EG01.32

FEATURES:

• These units can stand side-by-side on gondolas without size interference, giving shelf contents a cleaner, more efficient appearance. • Easy assembly — no tools required. Note:

Two Wire Shelves (top and bottom)

For posts, collars and split sleeves see page 70.

Freight class is 70.0.

Featuring patented QuadTruss® Design, making shelves up to 25% stronger. Shelves consist of a top mat assembly using 10 gauge mat wires spaced on 7⁄8˝ (22mm) centers and welded to full length 6 gauge serpentine trusses.

(•) MTS (made to stock) / ( ) MTO (made to order)

(Patent #5,390,803)

Two Add-A-Shelf® Center Shelves 300 lb. (136.1 kg) capacity. Shelves can be added or removed without disassembling the entire shelf unit. Add-A-Shelf® Reverse Mat Shelves, featuring a built-in ledge, available as an alternative. See below.

STAND SOLD SEPARATELY! gondola inset adjustable wire shelving unit used with gondola

Gondola Inset Wire Shelves*

14˝ width (356mm)

18˝ width (457mm)

21˝ width (533mm)

24˝ width (610mm)

length in. mm

weight lb. kg

351⁄2˝ 471⁄2˝ 351⁄2˝ 471⁄2˝ 351⁄2˝ 471⁄2˝ 351⁄2˝ 471⁄2˝

8 10 9 12 11 14 13 16

902 1207 902 1207 902 1207 902 1207

3.6 4.5 4.1 5.5 5.0 6.4 5.9 7.3

EAGLEbrite® model # list G1436Z 55 G1448Z 63 G1836Z 64 G1848Z 77 G2136Z 71 G2148Z 82 G2436Z 78 G2448Z 92

chrome model # list G1436C 61 G1448C 71 G1836C 68 G1848C 83 G2136C 80 G2148C 93 G2436C 84 G2448C 101

black model # list G1436BL 61 G1448BL 71 G1836BL 68 G1848BL 83 G2136BL 80 G2148BL 93 G2436BL 84 G2448BL 101

red model # list G1436R 61 G1448R 71 G1836R 68 G1848R 83 G2136R 80 G2148R 93 G2436R 84 G2448R 101

white model # list G1436W 61 G1448W 71 G1836W 68 G1848W 83 G2136W 80 G2148W 93 G2436W 84 G2448W 101

*These shelves are designed specifically for use with gondolas. They are 1⁄2˝ (13mm) shorter than our regular wire shelving (see page 7).

Add-A-Shelf® for Gondola Inset Wire Shelving - Patented # 5,884,567 • To specify finish, add suffix Z (EAGLEbrite® zinc), C (chrome), BL (black), R (red), or W (white) to model number when ordering. For example: A1448W indicates a white Add-A-Shelf® shelf.

Add-A-Shelf® Shelves length** in. mm

14˝ width 36˝ (356mm)

48˝ 18˝ width 36˝ (457mm) 48˝ 21˝ width 36˝ (533mm) 48˝ 24˝ width 36˝ (610mm) 48˝

914 1219 914 1219 914 1219 914 1219

weight lb. kg model # 8 3.6 A1436 10 4.5 A1448 9 4.1 A1836 12 5.5 A1848 11 5.0 A2136 14 6.4 A2148 13 5.9 A2436 16 7.3 A2448

List prices EAGLEbrite® chrome black red 63 71 71 71 73 81 81 81 74 75 75 75 84 89 89 89 80 86 86 86 92 99 99 99 85 92 92 92 101 108 108 108

Add-A-Shelf® Reverse Mat Shelves white 71 81 75 89 86 99 92 108

List prices model # EAGLEbrite® chrome black red white D1436 66 73 73 73 73 D1448 75 84 84 84 84 D1836 76 78 78 78 78 D1848 86 92 92 92 92 D2136 83 91 91 91 91 D2148 94 102 102 102 102 D2436 89 94 94 94 94 D2448 103 112 112 112 112

** Dimensions are nominal 100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

69


SHELVING / RETAIL DISPLAY Catalog Section 1

Posts for Gondola Inset Wire Shelving see spec sheet

Freight class is 50.0.

EG01.32

(•) MTS (made to stock) / ( ) MTO (made to order)

Patented # D 395,000

Add-A-Shelf ® Collar allows addition or removal of shelf without disassembling the entire unit.

model # A208891

Split Sleeves description plastic split sleeves for all shelves, set of four

list 11

• Packed four per bag. Quantity of four included with each shelf.

model # PLASTIC SPLIT SLEEVES

list 5

posts

height in. mm

weight lb. kg

14˝ 33˝ 54˝ 63˝ 74˝ 86˝

1.0 2.0 3.0 3.5 4.0 5.0

356 838 1372 1600 1880 2184

0.5 0.9 1.4 1.6 1.8 2.3

EAGLEbrite® model # list P14-Z • 16 P33-Z • 19 P54-Z • 23 P63-Z • 24 P74-Z • 27 P86-Z • 33

chrome model # list P14-C • 16 P33-C • 19 P54-C • 23 P63-C • 24 P74-C • 27 P86-C • 33

black model # list P14-BL • 16 P33-BL • 19 P54-BL • 23 P63-BL • 24 P74-BL • 27 P86-BL • 33

red model # P14-R P33-R P54-R P63-R P74-R P86-R

Wire Display Shelving see spec sheet

EG01.21 WEIGHT CAPACITY:

MasterSeal® coating for improved rust protection. Manufacturers’ ID numbers 1-Kent 2-Universal Nolin 3-Streater

4-Madix/Lozier 5-Royston 6-PermaSteel

70

• Heavy-duty shelves can hold up to 40 lbs. (18 kg) per linear foot. • EAGLEbrite® zinc finish with MasterSeal® coating. • Used primarily for gondolas. • Designed for use on all major shelving fixtures such as Kent, Madix/Lozier, Royston, Streater, Universal Nolin, and PermaSteel. • One-piece shelf bracket, tier notched to securely hold the display shelf in place. • Brackets can be positioned horizontally or slanted. • Shelving can be displayed using the 1˝ or 3˝ (25 or 76mm) integral fence by simply rotating the shelf 180°. • Available in 3´and 4´(914 and 1219mm) lengths. Freight class is 70.0.

weight lbs. kg

10˝ 254 10 12˝ 309 11 356 11 36˝ length 14˝ (914mm) 16˝ 406 12 18˝ 457 12 20˝ 508 13 10˝ 254 12 12˝ 309 13 48˝ length 14˝ 356 14 (1219mm) 16˝ 406 15 18˝ 457 16 20˝ 508 17 Note: Price includes shelf & brackets.

white model # list P14-W 16 P33-W 19 P54-W 23 P63-W 24 P74-W 27 P86-W 33

FEATURES:

STAND SOLD SEPARATELY! width in. mm

list 16 19 23 24 27 33

4.5 5.0 5.0 5.5 5.5 5.9 5.5 5.9 6.4 6.8 7.3 7.7

cu ft 0.5 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.9 0.9 1.1 1.1

model # 81036 81236 81436 81636 81836 82036 81048 81248 81448 81648 81848 82048

list 79 83 86 91 98 104 82 92 97 99 105 109

(•) MTS (made to stock) / ( ) MTO (made to order)

Steps to follow when ordering: 1) Find your shelving system supplier in “Manufacturers’ ID Numbers” table at middle of this page. 2) Determine correct brackets. Add the corresponding ID number to the end of the desired display shelf model number when ordering. Example: Model #810365 indicates a 10˝ x 36˝ (254 x 914mm) display shelf with brackets that fit a shelving fixture made by Royston.

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


SHELVING / RETAIL DISPLAY Catalog Section 1

Wire Display Shelving Accessories see spec sheet

Freight class is 70.0.

EG01.21

(•) MTS (made to stock) / ( ) MTO (made to order)

wall standard

Service for over 60 years.

display shelf

Quality... Value... Reliability!

bracket

PATENT PENDING! wall standard shown with display shelf and Universal Nolin bracket

Replacement Brackets • Sold in pairs. • Order replacement brackets to utilize standard shelves in different gondola systems. length in. mm

weight lbs. kg

cu ft

10˝ 12˝ 14˝ 16˝ 18˝ 20˝

2.6 3.2 3.7 4.3 4.8 5.3

0.6 0.6 0.6 0.6 0.6 0.6

254 309 356 406 457 508

1.2 1.5 1.7 2.0 2.2 2.4

Kent model # K10 K12 K14 K16 K18 K20

U. Nolin model # list U10 40 U12 43 U14 46 U16 51 U18 54 U20 56

list 40 43 46 51 54 56

Streater model # list S10 40 S12 43 S14 46 S16 51 S18 54 S20 56

Dividers / Ends

Royston model # list R10 40 R12 43 R14 46 R16 51 R18 54 R20 56

PermaSteel model # list P10 40 P12 43 P14 46 P16 51 P18 54 P20 56

Wall Standards

length in. mm

weight lbs. kg

cu ft

10˝ 12˝ 14˝ 16˝ 18˝ 20˝

0.5 0.6 0.7 0.8 0.9 1.0

0.3 0.4 0.4 0.7 0.7 1.0

254 309 356 406 457 508

Madix/Lozier model # list ML10 40 ML12 43 ML14 46 ML16 51 ML18 54 ML20 56

0.2 0.3 0.3 0.4 0.4 0.5

model # D10 D12 D14 D16 D18 D20

• Use for mounting directly to walls. • Sold and priced individually. • Order shelving with ID #2 (Universal Nolin – see chart below ) for use with wall standards.

list 28 31 33 34 36 42

height in. mm

weight lbs. kg

cu ft

24˝ 36˝ 48˝

3.0 4.5 6.0

0.1 0.1 0.1

610 914 1219

1.4 2.0 2.7

model # NUR24 NUR36 NUR48

list 27 29 31

Manufacturers’ I.D. Numbers Match your bracket to one of these drawings to determine manufacturer’s I.D. number. (Note: Bracket diagrams are not to scale - for reference purposes only)

- Kent

- Universal Nolin

∏- Streater

π

- Madix/Lozier

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

- Royston

ª

- PermaSteel

(prior to current design)

71


SHELVING / RETAIL DISPLAY Catalog Section 1

Quik-Set® Flat Solid Shelves see spec sheet

EG01.23

FEATURES:

s. 1,000 lb uted istrib evenly d apacity c t weigh lf!!! s r pe he

• Heavy duty. • All sides of shelves are constructed with a 2˝ (51mm) downturn and marine edge. • Each corner is fitted with a heavy-duty aluminum casting to accept a split sleeve. • No tools are required for assembly. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Stainless Steel 14 gauge

18˝ width (457mm)

24˝ width (610mm)

length in. mm

cu ft

weight lb. kg

36˝ 42˝ 48˝ 54˝ 60˝ 36˝ 42˝ 48˝ 54˝ 60˝

0.8 0.9 1.0 1.1 1.3 1.0 1.2 1.3 1.5 1.7

24 26 29 33 36 35 39 43 48 55

914 1067 1219 1372 1524 914 1067 1219 1372 1524

10.9 11.8 13.2 15.0 16.3 15.9 17.6 19.5 21.8 24.9

16 gauge

model # SHDS1836SF SHDS1842SF SHDS1848SF SHDS1854SF SHDS1860SF SHDS2436SF SHDS2442SF SHDS2448SF SHDS2454SF SHDS2460SF

list 405 452 492 536 576 528 577 647 700 749

weight lb. kg 19 21 24 27 29 28 32 36 41 47

8.6 9.5 10.9 12.2 13.2 12.7 14.5 16.3 18.6 21.3

model # HDS1836SF HDS1842SF HDS1848SF HDS1854SF HDS1860SF HDS2436SF HDS2442SF HDS2448SF HDS2454SF HDS2460SF

list 389 421 456 500 544 483 544 589 641 666

VALU-MASTER® Gray Epoxy 14 gauge length

18˝ width (457mm)

24˝ width (610mm)

in.

mm

cu ft

weight lb. kg

36˝ 42˝ 48˝ 54˝ 60˝ 36˝ 42˝ 48˝ 54˝ 60˝

914 1067 1219 1372 1524 914 1067 1219 1372 1524

0.8 0.9 1.0 1.1 1.3 1.0 1.2 1.3 1.5 1.7

24 26 29 33 36 35 39 43 48 55

length in. mm

cu ft

weight lb. kg

36˝ 42˝ 48˝ 54˝ 60˝ 36˝ 42˝ 48˝ 54˝ 60˝

0.8 0.9 1.0 1.1 1.3 1.0 1.2 1.3 1.5 1.7

24 26 29 33 36 35 39 43 48 55

10.9 11.8 13.2 15.0 16.3 15.9 17.6 19.5 21.8 24.9

16 gauge

model # SHDS1836VF SHDS1842VF SHDS1848VF SHDS1854VF SHDS1860VF SHDS2436VF SHDS2442VF SHDS2448VF SHDS2454VF SHDS2460VF

list 235 247 255 274 285 253 265 275 299 309

weight lb. kg 19 21 24 27 29 28 32 36 41 47

8.6 9.5 10.9 12.2 13.2 12.7 14.5 16.3 18.6 21.3

model # HDS1836VF HDS1842VF HDS1848VF HDS1854VF HDS1860VF HDS2436VF HDS2442VF HDS2448VF HDS2454VF HDS2460VF

list 226 236 244 245 269 241 252 260 282 292

Valu-Gard ® Green Epoxy 14 gauge

18˝ width (457mm)

24˝ width (610mm)

72

914 1067 1219 1372 1524 914 1067 1219 1372 1524

10.9 11.8 13.2 15.0 16.3 15.9 17.6 19.5 21.8 24.9

16 gauge

model # SHDS1836VGF SHDS1842VGF SHDS1848VGF SHDS1854VGF SHDS1860VGF SHDS2436VGF SHDS2442VGF SHDS2448VGF SHDS2454VGF SHDS2460VGF

list 235 247 255 274 285 253 265 275 299 309

weight lb. kg 19 21 24 27 29 28 32 36 41 47

8.6 9.5 10.9 12.2 13.2 12.7 14.5 16.3 18.6 21.3

model # HDS1836VGF HDS1842VGF HDS1848VGF HDS1854VGF HDS1860VGF HDS2436VGF HDS2442VGF HDS2448VGF HDS2454VGF HDS2460VGF

list 226 236 244 245 269 241 252 260 282 292

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


SHELVING / RETAIL DISPLAY Catalog Section 1

Quik-Set® Embossed Solid Shelves see spec sheet

EG01.23

s. 1,000 lb uted istrib evenly d apacity c t weigh lf!!! s r pe he

FEATURES:

• Heavy duty. • Constructed with a 2˝ (51mm) downturn and marine edge. • Each corner is fitted with a heavy-duty aluminum casting to accept a split sleeve. • Top of shelf is die stamped with a 1˝ (25mm) diameter drawn impression to provide a raised area for air circulation. • Each emboss is on 3˝ (76mm) centers for the width and 3˝ (76mm) centers for the length. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Stainless Steel 14 gauge

18˝ width (457mm)

24˝ width (610mm)

length in. mm

cu ft

weight lb. kg

36˝ 42˝ 48˝ 54˝ 60˝ 36˝ 42˝ 48˝ 54˝ 60˝

0.8 0.9 1.0 1.1 1.3 1.0 1.2 1.3 1.5 1.7

24 26 29 33 36 35 39 43 48 55

914 1067 1219 1372 1524 914 1067 1219 1372 1524

10.9 11.8 13.2 15.0 16.3 15.9 17.6 19.5 21.8 24.9

model # SHDS1836SE SHDS1842SE SHDS1848SE SHDS1854SE SHDS1860SE SHDS2436SE SHDS2442SE SHDS2448SE SHDS2454SE SHDS2460SE

16 gauge list 443 492 534 574 611 552 569 615 688 766

weight lb. kg 19 21 24 27 29 28 32 36 41 47

8.6 9.5 10.9 12.2 13.2 12.7 14.5 16.3 18.6 21.3

model # HDS1836SE HDS1842SE HDS1848SE HDS1854SE HDS1860SE HDS2436SE HDS2442SE HDS2448SE HDS2454SE HDS2460SE

list 429 475 521 544 572 514 557 592 661 706

VALU-MASTER® Gray Epoxy 14 gauge

18˝ width (457mm)

24˝ width (610mm)

length in. mm

cu ft

weight lb. kg

36˝ 42˝ 48˝ 54˝ 60˝ 36˝ 42˝ 48˝ 54˝ 60˝

0.8 0.9 1.0 1.1 1.3 1.0 1.2 1.3 1.5 1.7

24 26 29 33 36 35 39 43 48 55

length in. mm

cu ft

weight lb. kg

36˝ 42˝ 48˝ 54˝ 60˝ 36˝ 42˝ 48˝ 54˝ 60˝

0.8 0.9 1.0 1.1 1.3 1.0 1.2 1.3 1.5 1.7

24 26 29 33 36 35 39 43 48 55

914 1067 1219 1372 1524 914 1067 1219 1372 1524

10.9 11.8 13.2 15.0 16.3 15.9 17.6 19.5 21.8 24.9

model # SHDS1836VE SHDS1842VE SHDS1848VE SHDS1854VE SHDS1860VE SHDS2436VE SHDS2442VE SHDS2448VE SHDS2454VE SHDS2460VE

16 gauge list 241 253 259 280 289 258 269 280 303 316

weight lb. kg 19 21 24 27 29 28 32 36 41 47

8.6 9.5 10.9 12.2 13.2 12.7 14.5 16.3 18.6 21.3

model # HDS1836VE HDS1842VE HDS1848VE HDS1854VE HDS1860VE HDS2436VE HDS2442VE HDS2448VE HDS2454VE HDS2460VE

list 232 243 248 267 275 247 257 266 288 297

Valu-Gard® Green Epoxy 14 gauge

18˝ width (457mm)

24˝ width (610mm)

914 1067 1219 1372 1524 914 1067 1219 1372 1524

10.9 11.8 13.2 15.0 16.3 15.9 17.6 19.5 21.8 24.9

model # SHDS1836VGE SHDS1842VGE SHDS1848VGE SHDS1854VGE SHDS1860VGE SHDS2436VGE SHDS2442VGE SHDS2448VGE SHDS2454VGE SHDS2460VGE

16 gauge list 241 253 259 280 289 258 269 280 303 316

weight lb. kg 19 21 24 27 29 28 32 36 41 47

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

8.6 9.5 10.9 12.2 13.2 12.7 14.5 16.3 18.6 21.3

model # HDS1836VGE HDS1842VGE HDS1848VGE HDS1854VGE HDS1860VGE HDS2436VGE HDS2442VGE HDS2448VGE HDS2454VGE HDS2460VGE

list 232 243 248 267 275 247 257 266 288 297

73


SHELVING / RETAIL DISPLAY Catalog Section 1

Quik-Set® Louvered Solid Shelves see spec sheet

EG01.23

s. 1,000 lb uted ib istr evenly d apacity c t h weig lf!!! s r pe he

FEATURES:

• Heavy duty. • Shelves are constructed with a 2˝ (51mm) downturn and marine edge. • Each corner is fitted with a heavy-duty aluminum casting to accept a split sleeve. • Top of shelf is die stamped with a 23⁄4˝ x 1⁄2˝ (70 x 13mm) opening with a 1⁄16˝ (2mm) drawn depression around the opening to provide reinforcement. • Each opening is on 3˝ (76mm) centers for the width and 3˝ (76mm) centers for the length. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Stainless Steel 14 gauge length

18˝ width (457mm)

24˝ width (610mm)

in.

mm

cu ft

36˝ 42˝ 48˝ 54˝ 60˝ 36˝ 42˝ 48˝ 54˝ 60˝

914 1067 1219 1372 1524 914 1067 1219 1372 1524

0.8 0.9 1.0 1.1 1.3 1.0 1.2 1.3 1.5 1.7

weight lb. kg 24 26 29 33 36 35 39 43 48 55

10.9 11.8 13.2 15.0 16.3 15.9 17.6 19.5 21.8 24.9

16 gauge

model # SHDS1836SL SHDS1842SL SHDS1848SL SHDS1854SL SHDS1860SL SHDS2436SL SHDS2442SL SHDS2448SL SHDS2454SL SHDS2460SL

list 443 492 534 574 611 552 569 615 688 766

weight lb. kg 17 19 22 25 27 26 30 34 39 45

7.7 8.6 10.0 11.3 12.2 11.8 13.6 15.4 17.6 20.4

model # HDS1836SL HDS1842SL HDS1848SL HDS1854SL HDS1860SL HDS2436SL HDS2442SL HDS2448SL HDS2454SL HDS2460SL

list 429 475 521 544 572 514 557 608 661 706

VALU-MASTER® Gray Epoxy 14 gauge length

18˝ width (457mm)

24˝ width (610mm)

in.

mm

cu ft

weight lb. kg

36˝ 42˝ 48˝ 54˝ 60˝ 36˝ 42˝ 48˝ 54˝ 60˝

914 1067 1219 1372 1524 914 1067 1219 1372 1524

0.8 0.9 1.0 1.1 1.3 1.0 1.2 1.3 1.5 1.7

22 24 27 31 34 33 37 41 47 53

weight lb. kg 22 24 27 31 34 33 37 41 47 53

10.4 10.9 12.2 14.5 15.4 15.0 16.8 18.6 21.3 24.0

16 gauge

model # SHDS1836VL SHDS1842VL SHDS1848VL SHDS1854VL SHDS1860VL SHDS2436VL SHDS2442VL SHDS2448VL SHDS2454VL SHDS2460VL

list 244 255 262 268 294 260 273 283 308 320

weight lb. kg 17 19 22 25 27 26 30 34 39 45

7.7 8.6 10.0 11.3 12.2 11.8 13.6 15.4 17.6 20.4

model # HDS1836VL HDS1842VL HDS1848VL HDS1854VL HDS1860VL HDS2436VL HDS2442VL HDS2448VL HDS2454VL HDS2460VL

list 234 245 252 261 272 249 259 268 293 301

Valu-Gard® Green Epoxy 14 gauge length

18˝ width (457mm)

24˝ width (610mm)

74

in.

mm

cu ft

36˝ 42˝ 48˝ 54˝ 60˝ 36˝ 42˝ 48˝ 54˝ 60˝

914 1067 1219 1372 1524 914 1067 1219 1372 1524

0.8 0.9 1.0 1.1 1.3 1.0 1.2 1.3 1.5 1.7

10.4 10.9 12.2 14.5 15.4 15.0 16.8 18.6 21.3 24.0

16 gauge

model # SHDS1836VGL SHDS1842VGL SHDS1848VGL SHDS1854VGL SHDS1860VGL SHDS2436VGL SHDS2442VGL SHDS2448VGL SHDS2454VGL SHDS2460VGL

list 244 255 262 268 294 260 273 283 308 320

weight lb. kg 17 19 22 25 27 26 30 34 39 45

7.7 8.6 10.0 11.3 12.2 11.8 13.6 15.4 17.6 20.4

model # HDS1836VGL HDS1842VGL HDS1848VGL HDS1854VGL HDS1860VGL HDS2436VGL HDS2442VGL HDS2448VGL HDS2454VGL HDS2460VGL

list 234 245 252 261 272 249 259 268 293 301

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


SHELVING / RETAIL DISPLAY Catalog Section 1

Quik-Set® Solid Shelving Accessories

Freight class is 50.0.

see spec sheet EG01.23A

(•) MTS (made to stock) / ( ) MTO (made to order)

Posts • 15⁄8˝ (42mm) diameter. • Grooved in 2˝ (51mm) increments. height in. mm

weight lb. kg

14˝ 33˝ 54˝ 63˝ 74˝ 86˝

1.0 2.0 3.0 3.5 4.0 6.0

356 838 1372 1600 1880 2184

cubic feet

0.5 0.9 1.4 1.8 1.8 2.7

0.2 0.2 0.2 0.2 0.2 0.2

VALU-MASTER® model # list HDSP14-V 21 HDSP33-V 22 HDSP54-V 26 HDSP63-V 27 HDSP74-V 28 HDSP86-V 34

Valu-Gard® model # list HDSP14-VG 21 HDSP33-VG 22 HDSP54-VG 26 HDSP63-VG 27 HDSP74-VG 28 HDSP86-VG 34

stainless steel model # list HDSP14-S 49 HDSP33-S 69 HDSP54-S 74 HDSP63-S 84 HDSP74-S 98 HDSP86-S 109

Valu-Gard® model # list HDSCP14-VG 21 HDSCP33-VG 22 HDSCP54-VG 26 HDSCP63-VG 27 HDSCP74-VG 28 HDSCP86-VG 34

stainless steel model # list HDSCP14-S 49 HDSCP33-S 69 HDSCP54-S 74 HDSCP63-S 84 HDSCP74-S 98 HDSCP86-S 109

Caster Posts • 15⁄8˝ (42mm) diameter. • Grooved in 2˝ (51mm) increments. height in. mm

weight lb. kg

14˝ 33˝ 54˝ 63˝ 74˝ 86˝

1.0 2.0 3.0 3.5 4.0 6.0

356 838 1372 1600 1880 2184

cubic feet

0.5 0.9 1.4 1.8 1.8 2.7

0.2 0.2 0.2 0.2 0.2 0.2

VALU-MASTER® model # list HDSCP14-V 21 HDSCP33-V 22 HDSCP54-V 26 HDSCP63-V 27 HDSCP74-V 28 HDSCP86-V 34

Adjustable Foot

Post Cap

• Adjust from minimum height of 11⁄2˝ to maximum height of 21⁄2˝ (38 to 64mm).

• Black plastic cap fits inside 15⁄8˝ (32mm) diameter post.

weight lb. kg

weight lb. kg

0.25

0.1

model # 301036

list 9

0.25

0.1

model # 330010

Casters see spec sheet EG01.23A

FEATURES:

list 6

• 5˝ (127mm) diameter. • Set of four (two swivel, two with brake). Freight class is 65.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Polymer Cart Washable with Polymer Tread weight capacity per caster lbs. kg 250

113.4

model # CAHW4-SB

list per set 523

Zinc with Poly Tread weight capacity per caster lbs. kg 250

113.4

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

model # CAHP4-SB

list per set 421

75


SHELVING / RETAIL DISPLAY Catalog Section 1

SPEC-MASTER® Quik-Set® Pot & Pan Racks with Embossed Shelves see product announcement

EG8197

SHELVES FEATURE:

• 69˝ (1753mm) overall height. • 2˝ (51mm) downturn and marine edge. • Top of shelf is die stamped with a 1˝ (25mm) diameter drawn impression to provide a raised area for air circulation. • Each emboss is on 3˝ (76mm) centers for the width and length. • Each shelf corner is fitted with a heavy duty aluminum casting to accept a split sleeve. • No tools required for assembly. • Offered in stainless steel, VALU-MASTER® pewter gray epoxy, or Valu-Gard® green epoxy finish. • 15⁄8˝ (41mm) diameter posts are grooved and numbered in 2˝ (51mm) increments to ensure easy leveling and quick adjustments, and fitted with 5˝ (127mm) diameter all-polymer cartwashable swivel casters, two with brake.

POST FEATURE: Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Stainless Steel 14 gauge

24˝ width (610mm)

length in. mm

cu ft

48˝ 60˝

1.5 1.9

1219 1524

weight lb. kg 188 236

85.3 106.6

16 gauge

model # PR2448SE14 PR2460SE14

list 3241 3847

weight lb. kg 160 204

72.6 92.5

model # PR2448SE16 PR2460SE16

list 3148 3607

VALU-MASTER® Gray Epoxy 14 gauge

24˝ width (610mm)

length in. mm

cu ft

lb.

kg

48˝ 60˝

1.5 1.9

188 236

85.3 106.6

1219 1524

16 gauge

weight model # PR2448VE14 PR2460VE14

list 1696 1839

weight lb. kg 160 204

72.6 92.5

model # PR2448VE16 PR2460VE16

list 1641 1763

Valu-Gard® Green Epoxy 14 gauge

24˝ width (610mm)

76

length in. mm

cu ft

lb.

kg

48˝ 60˝

1.5 1.9

188 236

85.3 106.6

1219 1524

16 gauge

weight model # list PR2448VGE14 1696 PR2460VGE14 1839

weight lb. kg 160 204

72.6 92.5

model # list PR2448VGE16 1641 PR2460VGE16 1763

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


SHELVING / RETAIL DISPLAY Catalog Section 1

Polymer Shelving LIFESTOR® Starter Units

• Four posts. • Four shelves. • Combination of stainless steel or zinc posts, rails, high density green polymer shelving sections and fittings provide a heavy duty unit that is virtually non-corrosive.

see spec sheet EG01.12A

INCLUDES:

shelving made of removable shelf sections which are dishwasher safe.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Add-On Kit required

A S

400 lbs. weight capacity per shelf

S A

“T” shape

Add-On Kit required

A “L” shape

S

A

Continuous

various configurations of LIFESTOR® starter (S) and add-on (A) units

Featuring MICROGARD® an antimicrobial agent which contains built-in protection to retard the growth of a broad range of bacteria, mold and mildew on shelf surface that causes stains, odors and degradation. Standard on all LIFESTOR® Shelving.

63˝ (1600mm)-High Starter Units — With 63˝ (1600mm) high posts.

18˝ width (457mm)

23˝ width (584mm)

length in. mm

weight lb. kg

cu ft

24˝ 30˝ 36˝ 42˝ 48˝ 54˝ 60˝ 24˝ 30˝ 36˝ 42˝ 48˝ 54˝ 60˝

42 52 60 65 70 78 86 48 60 70 76 82 94 102

3.6 4.5 5.6 5.8 6.0 6.8 7.6 4.4 5.6 6.0 6.5 7.2 8.4 9.6

610 762 914 1067 1219 1372 1524 610 762 914 1067 1219 1372 1524

19.1 23.6 27.2 29.5 31.8 35.4 39.0 21.8 27.2 31.8 34.5 37.2 42.6 46.3

stainless steel w/ 4 Solid Shelves w/ 4 Louvered Shelves model # list model # list S4-63S-S1824PM 752 S4-63S-L1824PM 688 S4-63S-S1830PM 764 S4-63S-L1830PM 720 S4-63S-S1836PM 804 S4-63S-L1836PM • 772 S4-63S-S1842PM 876 S4-63S-L1842PM • 812 S4-63S-S1848PM • 928 S4-63S-L1848PM • 844 S4-63S-S1854PM 1036 S4-63S-L1854PM • 920 S4-63S-S1860PM 1128 S4-63S-L1860PM • 932 S4-63S-S2324PM 864 S4-63S-L2324PM 800 S4-63S-S2330PM • 908 S4-63S-L2330PM 812 S4-63S-S2336PM 952 S4-63S-L2336PM • 824 S4-63S-S2342PM • 1048 S4-63S-L2342PM • 960 S4-63S-S2348PM • 1100 S4-63S-L2348PM • 976 S4-63S-S2354PM 1184 S4-63S-L2354PM • 1088 S4-63S-S2360PM • 1204 S4-63S-L2360PM • 1116

EAGLEbrite® w/ 4 Solid Shelves w/ 4 Louvered Shelves model # list model # list S4-63Z-S1824PM 668 S4-63Z-L1824PM 624 S4-63Z-S1830PM 688 S4-63Z-L1830PM 632 S4-63Z-S1836PM 704 S4-63Z-L1836PM • 648 S4-63Z-S1842PM 784 S4-63Z-L1842PM • 728 S4-63Z-S1848PM • 796 S4-63Z-L1848PM • 740 S4-63Z-S1854PM 900 S4-63Z-L1854PM • 820 S4-63Z-S1860PM • 912 S4-63Z-L1860PM • 840 S4-63Z-S2324PM 780 S4-63Z-L2324PM 720 S4-63Z-S2330PM 792 S4-63Z-L2330PM 732 S4-63Z-S2336PM 804 S4-63Z-L2336PM • 212 S4-63Z-S2342PM 940 S4-63Z-L2342PM • 860 S4-63Z-S2348PM • 956 S4-63Z-L2348PM • 868 S4-63Z-S2354PM 1068 S4-63Z-L2354PM • 972 S4-63Z-S2360PM 1084 S4-63Z-L2360PM • 984

74˝ (1880mm)-High Starter Units — With 74˝ (1880mm) high posts.

18˝ width (457mm)

23˝ width (584mm)

length in. mm

weight lb. kg

24˝ 30˝ 36˝ 42˝ 48˝ 54˝ 60˝ 24˝ 30˝ 36˝ 42˝ 48˝ 54˝ 60˝

44 54 62 67 72 80 88 50 62 72 76 84 96 106

610 762 914 1067 1219 1372 1524 610 762 914 1067 1219 1372 1524

20.0 24.5 28.1 30.4 32.7 36.3 39.9 22.7 28.1 32.7 34.5 38.1 43.6 48.1

cu ft 4.0 4.9 6.0 6.2 6.4 7.2 8.0 5.0 6.0 6.4 7.0 7.6 9.0 10.5

stainless steel w/ 4 Solid Shelves w/ 4 Louvered Shelves model # list model # list S4-74S-S1824PM 780 S4-74S-L1824PM 716 S4-74S-S1830PM 792 S4-74S-L1830PM 748 S4-74S-S1836PM 832 S4-74S-L1836PM • 800 S4-74S-S1842PM 904 S4-74S-L1842PM • 840 S4-74S-S1848PM • 956 S4-74S-L1848PM • 872 S4-74S-S1854PM 1064 S4-74S-L1854PM • 948 S4-74S-S1860PM 1156 S4-74S-L1860PM • 960 S4-74S-S2324PM 892 S4-74S-L2324PM 828 S4-74S-S2330PM • 936 S4-74S-L2330PM 840 S4-74S-S2336PM 980 S4-74S-L2336PM • 852 S4-74S-S2342PM • 1076 S4-74S-L2342PM • 988 S4-74S-S2348PM • 1128 S4-74S-L2348PM • 1004 S4-74S-S2354PM 1212 S4-74S-L2354PM • 1116 S4-74S-S2360PM • 1232 S4-74S-L2360PM • 1140

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

EAGLEbrite® w/ 4 Solid Shelves w/ 4 Louvered Shelves model # list model # list S4-74Z-S1824PM 688 S4-74Z-L1824PM 644 S4-74Z-S1830PM 708 S4-74Z-L1830PM 652 S4-74Z-S1836PM 724 S4-74Z-L1836PM • 668 S4-74Z-S1842PM 804 S4-74Z-L1842PM • 748 S4-74Z-S1848PM • 816 S4-74Z-L1848PM • 760 S4-74Z-S1854PM 920 S4-74Z-L1854PM • 840 S4-74Z-S1860PM • 932 S4-74Z-L1860PM • 860 S4-74Z-S2324PM 800 S4-74Z-L2324PM 740 S4-74Z-S2330PM 812 S4-74Z-L2330PM 752 S4-74Z-S2336PM 824 S4-74Z-L2336PM • 232 S4-74Z-S2342PM 960 S4-74Z-L2342PM • 880 S4-74Z-S2348PM • 976 S4-74Z-L2348PM • 888 S4-74Z-S2354PM 1088 S4-74Z-L2354PM • 992 S4-74Z-S2360PM 1104 S4-74Z-L2360PM • 1004

77


SHELVING / RETAIL DISPLAY Catalog Section 1

LIFESTOR® Add-On Units see spec sheet EG01.12B

INCLUDES:

• Two posts. • Four shelves. • Combination of stainless steel or zinc posts, rails, high density green polymer shelving sections and fittings provide a heavy duty unit that is virtually non-corrosive. Freight class is 70.0.

400 lbs. per shelf weight capacity

(•) MTS (made to stock) / ( ) MTO (made to order)

Featuring MICROGARD® an antimicrobial agent which contains built-in protection to retard the growth of a broad range of bacteria, mold and mildew on shelf surface that causes stains, odors and degradation. Standard on all LIFESTOR® Shelving.

63˝ (1600mm)-High Add-On Units — With 63˝ (1600mm) high posts.

18˝ width (457mm)

23˝ width (584mm)

length in. mm

weight lb. kg

cu ft

24˝ 30˝ 36˝ 42˝ 48˝ 54˝ 60˝ 24˝ 30˝ 36˝ 42˝ 48˝ 54˝ 60˝

35 45 53 58 63 71 77 41 53 63 70 75 87 95

2.8 3.7 4.8 5.0 5.2 6.0 6.8 3.6 4.8 5.2 6.1 6.4 7.6 8.4

610 762 914 1067 1219 1372 1524 610 762 914 1067 1219 1372 1524

15.9 20.4 24.0 26.3 28.6 32.7 34.9 18.6 24.0 28.6 31.8 34.0 39.5 43.1

stainless steel w/ 4 Solid Shelves w/ 4 Louvered Shelves model # list model # list A4-63S-S1824PM 664 A4-63S-L1824PM 600 A4-63S-S1830PM 676 A4-63S-L1830PM 632 A4-63S-S1836PM 716 A4-63S-L1836PM • 684 A4-63S-S1842PM 788 A4-63S-L1842PM • 724 A4-63S-S1848PM • 840 A4-63S-L1848PM • 756 A4-63S-S1854PM 948 A4-63S-L1854PM • 832 A4-63S-S1860PM 1040 A4-63S-L1860PM • 844 A4-63S-S2324PM 776 A4-63S-L2324PM 712 A4-63S-S2330PM • 820 A4-63S-L2330PM 724 A4-63S-S2336PM 864 A4-63S-L2336PM • 736 A4-63S-S2342PM • 960 A4-63S-L2342PM • 872 A4-63S-S2348PM • 1012 A4-63S-L2348PM • 888 A4-63S-S2354PM 1096 A4-63S-L2354PM • 1000 A4-63S-S2360PM • 1116 A4-63S-L2360PM • 1028

EAGLEbrite® w/ 4 Solid Shelves w/ 4 Louvered Shelves model # list model # list A4-63Z-S1824PM 702 A4-63Z-L1824PM 638 A4-63Z-S1830PM 714 A4-63Z-L1830PM 670 A4-63Z-S1836PM 754 A4-63Z-L1836PM • 722 A4-63Z-S1842PM 826 A4-63Z-L1842PM • 762 A4-63Z-S1848PM • 878 A4-63Z-L1848PM • 794 A4-63Z-S1854PM 986 A4-63Z-L1854PM • 870 A4-63Z-S1860PM • 1078 A4-63Z-L1860PM • 882 A4-63Z-S2324PM 814 A4-63Z-L2324PM 750 A4-63Z-S2330PM 858 A4-63Z-L2330PM 762 A4-63Z-S2336PM 902 A4-63Z-L2336PM • 774 A4-63Z-S2342PM 998 A4-63Z-L2342PM • 910 A4-63Z-S2348PM • 1050 A4-63Z-L2348PM • 926 A4-63Z-S2354PM 1134 A4-63Z-L2354PM • 1038 A4-63Z-S2360PM 1154 A4-63Z-L2360PM • 1062

74˝ (1880mm)-High Add-On Units — With 74˝ (1880mm) high posts.

18˝ width (457mm)

23˝ width (584mm)

78

length in. mm

weight lb. kg

cu ft

24˝ 30˝ 36˝ 42˝ 48˝ 54˝ 60˝ 24˝ 30˝ 36˝ 42˝ 48˝ 54˝ 60˝

37 47 55 60 65 73 80 43 55 65 68 77 89 98

3.0 3.9 5.0 5.2 5.4 6.2 7.0 4.0 5.0 5.4 6.5 7.6 8.0 8.3

610 762 914 1067 1219 1372 1524 610 762 991 1067 1219 1372 1524

16.7 21.3 24.9 27.2 29.4 33.1 36.3 19.5 24.9 29.4 30.8 34.9 40.3 44.5

stainless steel w/ 4 Solid Shelves w/ 4 Louvered Shelves model # list model # list A4-74S-S1824PM 566 A4-74S-L1824PM 522 A4-74S-S1830PM 586 A4-74S-L1830PM 530 A4-74S-S1836PM 602 A4-74S-L1836PM • 546 A4-74S-S1842PM 682 A4-74S-L1842PM • 626 A4-74S-S1848PM • 694 A4-74S-L1848PM • 638 A4-74S-S1854PM 798 A4-74S-L1854PM • 718 A4-74S-S1860PM 810 A4-74S-L1860PM • 738 A4-74S-S2324PM 678 A4-74S-L2324PM 618 A4-74S-S2330PM • 690 A4-74S-L2330PM 630 A4-74S-S2336PM 702 A4-74S-L2336PM • 110 A4-74S-S2342PM • 838 A4-74S-L2342PM • 758 A4-74S-S2348PM • 854 A4-74S-L2348PM • 766 A4-74S-S2354PM 966 A4-74S-L2354PM • 870 A4-74S-S2360PM • 982 A4-74S-L2360PM • 882

EAGLEbrite® w/ 4 Solid Shelves w/ 4 Louvered Shelves model # list model # list A4-74Z-S1824PM 600 A4-74Z-L1824PM 556 A4-74Z-S1830PM 620 A4-74Z-L1830PM 564 A4-74Z-S1836PM 636 A4-74Z-L1836PM • 580 A4-74Z-S1842PM 716 A4-74Z-L1842PM • 660 A4-74Z-S1848PM • 728 A4-74Z-L1848PM • 672 A4-74Z-S1854PM 832 A4-74Z-L1854PM • 752 A4-74Z-S1860PM • 844 A4-74Z-L1860PM • 772 A4-74Z-S2324PM 712 A4-74Z-L2324PM 652 A4-74Z-S2330PM 724 A4-74Z-L2330PM 664 A4-74Z-S2336PM 736 A4-74Z-L2336PM • 676 A4-74Z-S2342PM 872 A4-74Z-L2342PM • 792 A4-74Z-S2348PM • 888 A4-74Z-L2348PM • 800 A4-74Z-S2354PM 1000 A4-74Z-L2354PM • 904 A4-74Z-S2360PM 1016 A4-74Z-L2360PM • 916

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


SHELVING / RETAIL DISPLAY Catalog Section 1

LIFESTOR® Shelving

• • • •

see spec sheet EG01.12C

INCLUDES:

400 lbs. per shelf weight capacity

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

assembled LIFESTOR® mobile unit (see page 80 for posts)

assembled LIFESTOR® stationary unit (see page 80 for posts)

Rails. Side braces. Four connector kits. Combination of stainless steel or zinc posts, rails, high density green polymer shelving sections and fittings provide a heavy duty unit that is virtually non-corrosive.

Featuring MICROGARD® an antimicrobial agent which contains built-in protection to retard the growth of a broad range of bacteria, mold and mildew on shelf surface that causes stains, odors and degradation. Standard on all LIFESTOR® Shelving.

Shelves for Stationary Applications – Front-to-back side braces are polymer for stationary use.

18˝ width (457mm)

23˝ width (584mm)

length* in. mm

weight lb. kg

cu ft

24˝ 30˝ 36˝ 42˝ 48˝ 54˝ 60˝ 24˝ 30˝ 36˝ 42˝ 48˝ 54˝ 60˝

7.0 8.5 10.0 11.5 13.0 14.5 16.0 8.5 10.0 11.5 13.0 14.5 16.0 17.5

0.5 0.7 0.9 1.1 1.3 1.5 1.7 0.7 0.9 1.1 1.3 1.5 1.7 1.9

610 762 914 1067 1219 1372 1524 610 762 914 1067 1219 1372 1524

3.2 3.9 4.5 5.2 5.8 6.6 7.3 3.9 4.5 4.8 5.8 5.7 8.8 7.9

shelves w/ stainless steel rails Solid Shelves Louvered Shelves model # list model # list S1824PSM 144 L1824PSM 128 S1830PSM 147 L1830PSM 136 S1836PSM 157 L1836PSM • 149 S1842PSM 175 L1842PSM • 159 S1848PSM • 188 L1848PSM • 167 S1854PSM 215 L1854PSM • 186 S1860PSM 238 L1860PSM • 189 S2324PSM 172 L2324PSM 156 S2330PSM • 183 L2330PSM 159 S2336PSM 194 L2336PSM • 162 S2342PSM • 218 L2342PSM • 196 S2348PSM • 231 L2348PSM • 200 S2354PSM 252 L2354PSM • 228 S2360PSM • 257 L2360PSM • 232

shelves w/ EAGLEbrite® zinc rails Solid Shelves Louvered Shelves model # list model # list S1824PZM 128 L1824PZM 117 S1830PZM 133 L1830PZM 119 S1836PZM 137 L1836PZM • 123 S1842PZM 157 L1842PZM • 143 S1848PZM • 160 L1848PZM • 146 S1854PZM 186 L1854PZM • 166 S1860PZM • 189 L1860PZM • 171 S2324PZM 156 L2324PZM 141 S2330PZM 159 L2330PZM 144 S2336PZM 162 L2336PZM • 147 S2342PZM 196 L2342PZM • 176 S2348PZM • 200 L2348PZM • 178 S2354PZM 228 L2354PZM • 204 S2360PZM 232 L2360PZM • 207

Shelves for Mobile Applications – Finish of front-to-back side braces match finish of side-to-side rails. Rails enhance stability.

18˝ width (457mm)

23˝ width (584mm)

length* in. mm

weight lb. kg

cu ft

24˝ 30˝ 36˝ 42˝ 48˝ 54˝ 60˝ 24˝ 30˝ 36˝ 42˝ 48˝ 54˝ 60˝

7.0 8.5 10.0 11.5 13.0 14.5 16.0 8.5 10.0 11.5 13.0 14.5 16.0 17.5

0.5 0.7 0.9 1.1 1.3 1.5 1.7 0.7 0.9 1.1 1.3 1.5 1.7 1.9

610 762 914 1067 1219 1372 1524 610 762 914 1067 1219 1372 1524

3.2 3.9 4.5 5.2 5.8 6.6 7.3 3.9 4.5 4.8 5.8 5.7 8.8 7.9

shelves w/ stainless steel rails Solid Shelves Louvered Shelves model # list model # list S1824PSM-M 191 L1824PSM-M 175 S1830PSM-M 194 L1830PSM-M 182 S1836PSM-M 203 L1836PSM-M 196 S1842PSM-M 221 L1842PSM-M 205 S1848PSM-M 235 L1848PSM-M 214 S1854PSM-M 261 L1854PSM-M 233 S1860PSM-M 284 L1860PSM-M 236 S2324PSM-M 239 L2324PSM-M 223 S2330PSM-M 251 L2330PSM-M 226 S2336PSM-M 261 L2336PSM-M 229 S2342PSM-M 285 L2342PSM-M 263 S2348PSM-M 298 L2348PSM-M 267 S2354PSM-M 319 L2354PSM-M 296 S2360PSM-M 324 L2360PSM-M 299

shelves w/ EAGLEbrite® zinc rails Solid Shelves Louvered Shelves model # list model # list S1824PZM-M 171 L1824PZM-M 159 S1830PZM-M 175 L1830PZM-M 161 S1836PZM-M 179 L1836PZM-M 165 S1842PZM-M 199 L1842PZM-M 185 S1848PZM-M 202 L1848PZM-M 188 S1854PZM-M 228 L1854PZM-M 208 S1860PZM-M 232 L1860PZM-M 213 S2324PZM-M 219 L2324PZM-M 204 S2330PZM-M 222 L2330PZM-M 207 S2336PZM-M 225 L2336PZM-M 211 S2342PZM-M 259 L2342PZM-M 239 S2348PZM-M 263 L2348PZM-M 241 S2354PZM-M 292 L2354PZM-M 267 S2360PZM-M 295 L2360PZM-M 271

* Shelves up to 48˝ (1219mm) long hold 400 lbs. (181.4 kg). Shelves over 48˝ (1219mm) hold 300 lbs. (136.1 kg). 100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

79


SHELVING / RETAIL DISPLAY Catalog Section 1

LIFESTOR® Shelving (continued)

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

see spec sheet EG01.12C

Posts… • Constructed of stainless steel or zinc plated mild steel with a clear antimicrobial epoxy coating. • 11⁄4˝ (32mm) outside diameter, grooved at 2˝ (51mm) increments for easy assembly. • Post cap included.

…For Stationary Use* height weight in. mm lbs. kg 14˝ 33˝ 54˝ 63˝ 74˝ 86˝

356 383 1372 1600 1880 2184

1.0 2.0 3.0 3.5 4.0 5.0

0.5 0.9 1.4 1.6 1.8 2.3

®

…For Mobile Use**

cu stainless EAGLEbrite ft model # list model # list 0.2 PP14-S 25 PP14-Z 24 0.4 PP33-S • 37 PP33-Z • 29 0.4 PP54-S 39 PP54-Z 36 0.4 PP63-S • 44 PP63-Z • 39 0.5 PP74-S • 51 PP74-Z • 44 0.5 PP86-S • 58 PP86-Z 51

stainless model # list CPP14-S • 25 CPP33-S 37 CPP54-S 39 CPP63-S • 44 CPP74-S • 51 CPP86-S • 58

EAGLEbrite® model # list CPP14-Z 24 CPP33-Z 34 CPP54-Z 36 CPP63-Z • 39 CPP74-Z • 44 CPP86-Z 51

caster post shown with caster (caster sold separately)

* Stationary posts include adjustable feet. ** Stainless steel or zinc side braces are required for mobile use – two per shelf.

LIFESTOR® Shelving Components

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

see spec sheet EG01.12C

Casters • For use with #CPP caster posts, and not for LIFESTOR® Dunnage Racks see page 83. Note:

louvered shelf section

Stainless steel or zinc side braces are required for use with casters. Two braces per shelf are required.

weight lbs. kg

caster description 5˝ (127mm) dia. swivel heavy-duty 250 lb. (113 kg) cap. - urethane same as above with brake 5˝ (127mm) rotary bumper, each

3.0

1.4

3.5 1.0

1.6 0.5

solid shelf section

Shelf Sections

cubic feet model # 0.1 A205340

list 76

A205341 A205342

85 16

0.1 0.1

• Green polymer. • Features MICROGARD® protection. shelf width in. mm

weight lbs. kg

cu ft

18˝ 23˝

1.9 2.4

0.4 0.4

457 584

0.9 1.1

solid model # list A216242 17 A216243 24

louvered model # list A216244 16 A216245 21

Replacement Side Braces (front-to-back)… • Two per shelf required.

…For Stationary Use

…For Mobile Use

shelf width in. mm

cu ft

weight lbs. kg

18˝ 23˝

0.2 0.2

0.8 1.0

457 584

0.4 0.5

polymer model # list A216246 7 A216247 13

shelf width cu in. mm ft 18˝ 23˝

457 584

0.2 0.2

zinc weight lbs. kg model # list 1.2 0.5 A211331 • 19 1.5 0.7 A211332 • 28

stainless weight lbs. kg model # 1.2 0.5 A216240 1.5 0.7 A216241 •

list 21 31

Featuring MICROGARD® an antimicrobial agent which contains built-in protection to retard the growth of a broad range of bacteria, mold and mildew on shelf surface that causes stains, odors and degradation. Standard on all LIFESTOR® Shelving.

80

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


SHELVING / RETAIL DISPLAY Catalog Section 1

LIFESTOR® Shelving Components

Freight class is 50.0. (•) MTS (made to stock) / ( ) MTO (made to order)

see spec sheet EG01.12C

Rails (side-to-side) • Constructed of stainless steel or zinc plated mild steel with a clear antimicrobial epoxy coating. • Each end fits securely into a lug. fits actual shelf length rail length in. mm in. mm

weight lbs. kg

24˝ 30˝ 36˝ 42˝ 48˝ 54˝ 60˝

1.4 1.8 2.1 2.5 2.8 3.2 3.5

610 762 914 1067 1219 1372 1392

18 ⁄16˝ 2413⁄16˝ 3013⁄16˝ 3613⁄16˝ 4213⁄16˝ 4813⁄16˝ 5413⁄16˝ 13

478 631 783 935 1087 1240 1392

2-sided lug

3-sided lug

4-sided lug

Connectors 0.6 0.8 0.9 1.1 1.3 1.5 1.6

stainless steel model # list A215051 32 A215052 41 A215053 49 A215054 54 A215055 57 A215056 62 A215057 72

EAGLEbrite® model # list A215152 28 A215153 34 A215154 41 A215155 45 A215156 48 A215157 53 A215158 57

description

weight lbs. kg

cu ft

2-sided lug 3-sided lug 4-sided lug “U” Connector

0.4 0.4 0.4 0.2

.04 .04 .04 .04

0.2 0.2 0.2 0.1

“U” connector

model # A208137 A208138 A208139 A208140

list 9 9 9 11

“L” or “T” Add-On Kits • Consist of “U” connector and notched shelf section. • Features MICROGARD® protection. louvered shelf • For add-on units, see page 78. section with notch shelf width in. mm

weight lbs. kg

cu ft

18˝ 23˝

2.0 2.5

0.4 0.4

457 584

0.9 1.1

solid louvered model # list model # list 18-SM 40 18-LM 34 23-SM 40 23-LM 34

split sleeve

Miscellaneous description split sleeve * adjustable foot cap “U” connector

(•) MTS (made to stock) / ( ) MTO (made to order)

Ledges

Dividers

• Ledges snap over post without tools. • Valu-Gard® green epoxy finish. • Consult factory for other finishes.

• 8˝ (203mm). • Dividers snap onto shelf via two 16 gauge stainless steel clips. • Valu-Gard® green epoxy finish. • Consult factory for other finishes.

*18˝ *23˝ 24˝ 30˝ 36˝ 42˝ 48˝ 54˝ 60˝

457 584 610 762 914 1067 1219 1372 1524

0.5 0.6 0.6 0.7 0.8 0.9 0.8 1.2 1.4

0.2 0.3 0.3 0.3 0.3 0.3 0.4 0.5 0.5

1˝ (25mm) model # list LSL18-1VG 20 LSL23-1VG 22 LSL24-1VG 22 LSL30-1VG 24 LSL36-1VG 35 LSL42-1VG 37 LSL48-1VG 39 LSL54-1VG 42 LSL60-1VG 45

4˝ (102mm) model # list LSL18-4VG 31 LSL23-4VG 32 LSL24-4VG 32 LSL30-4VG 41 LSL36-4VG 48 LSL42-4VG 51 LSL48-4VG 59 LSL54-4VG 61 LSL60-4VG 62

list 3 6 3

Freight class is 70.0.

see spec sheet EG01.12D

weight lbs. kg

model # A208141 A208143 A208144

*Split sleeve must be ordered as a separate component.

LIFESTOR® Shelving Accessories

length in. mm

cap

adjustable foot

width in. mm

weight lbs. kg

18˝ 23˝

1.3 1.8

457 584

0.6 0.8

model # LSD18-VG LSD23-VG

list 33 37

* Front-to-back. All other lengths are used side-to-side.

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

81


SHELVING / RETAIL DISPLAY Catalog Section 1

LIFESTOR® Shelving Accessories

Freight class is 70.0.

see spec sheet EG01.12D

Ordering requirements for Enclosure Panels:

Enclosure Panels • • • • •

3˝ (76mm) grid. Panels attach to shelf via six 14 gauge stainless steel clips. A flat blade screwdriver is required for installation. Valu-Gard® green epoxy finish. Consult factory for other finishes. for 54˝ (1372mm) for 63˝ (1600mm) for 74˝ (1880mm) post height post height post height model # list model # list model # list LSE1254-VG 121 LSE1263-VG 155 LSE1274-VG 174 LSE1854-VG 123 LSE1863-VG 164 LSE1874-VG 181

width in. mm 12˝ 18˝

305 457

(•) MTS (made to stock) / ( ) MTO (made to order)

Tote Slide Systems • Only available for 23˝ (584mm) wide shelves. • System is suspended from the unit’s rails via four shelf slide clips (sold separately). • Load capacity up to 35 lbs. (15.9 kg).

• Panels for 63˝ (1600mm) posts used as example below. shelf width in. mm 18˝ 23˝

enclosure panel model # qty LSE1263-VG 1 LSE1863-VG 1

457 584

shelf length in. mm 24˝ 30˝ 36˝ 42˝ 48˝ 54˝ 60˝

610 762 914 1067 1219 1372 1524

enclosure panel model # qty LSE1263-VG 1 LSE1863-VG 1 LSE1263-VG 2 LSE1863-VG 2 LSE1863-VG 2 LSE1263-VG 4 LSE1863-VG 3

Wall Brackets • LIFESTOR® can now be mounted to the wall! • Each bracket consists of one single shelf support and one mounting plate. • Valu-Gard® green epoxy finish.

shelf slide clip

width x length x depth in. mm 14˝ x 21 ⁄8˝ x 10 ⁄4˝ 20˝ x 215⁄8˝ x 101⁄4˝ 5

1

356 x 683 x 260 508 x 683 x 260

weight cubic lbs. kg feet model # list 5.0 2.3 2.0 TS1421 121 4.7 2.1 3.8 TS2021 • 126

for shelf width in. mm 18˝ 23˝

457 584

weight cubic lbs. kg feet model # 10 4.5 0.5 LWB18-VG 14 6.4 0.7 LWB23-VG

list per pair 59 67

Shelf Slide Clips for Tote Slide Systems

• Set of four. weight cubic lbs. kg feet model # 0.5 0.2 0.1 SSC

list 50

Tray Drying Racks • Perfect for bun pans, cutting boards, server trays and pizza pans. • Fits 48˝ (1219mm) long shelves or longer. • Features 14 or 28 holding slots. • Constructed of 6 gauge wire with Valu-Gard® green epoxy coating. spacing number 18˝ RACKS 23˝ RACKS in. mm of slots model # list model # list 11⁄2˝ 38 28 TR18481-VG 121 TR23481-VG 121 3˝ 76 14 TR18483-VG 114 TR23483-VG 115

82

Service for over 60 years.

Quality... Value... Reliability!

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


SHELVING / RETAIL DISPLAY Catalog Section 1

LIFESTOR® Dunnage Racks see spec sheet

EG01.13

WEIGHT CAPACITY:

MOBILE FEATURES: STATIONARY FEATURES:

mobile dunnage rack with louvered shelves

stationary dunnage rack with louvered shelves

BOTH FEATURES: Featuring MICROGARD® an antimicrobial agent which contains built-in protection to retard the growth of a broad range of bacteria, mold and mildew on shelf surface that causes stains, odors and degradation. Standard on all LIFESTOR® Shelving.

Stationary Racks: 1,000 lbs. (454 kg). Mobile Racks: 800 lbs. (363 kg). • Four 5˝ (127mm) diameter heavy duty swivel casters with rubber tread, two with brakes. • Stainless steel bullet feet. • 15⁄8˝ (41mm) diameter stainless steel legs. • 11⁄4˝ (32mm) diameter stainless steel crossbracing on all four sides. • 16˝ (406mm) height. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Stationary

18˝ width (457mm)

23˝ width (584mm)

size in. mm

cu ft

32˝ 41˝ 50˝ 32˝ 41˝ 50˝

2.0 2.6 3.1 2.0 2.6 3.1

813 1041 1270 813 1041 1270

w/ Solid Shelves model # list DR-S1832PSM 556 DR-S1841PSM 603 DR-S1850PSM 652 DR-S2332PSM 582 DR-S2341PSM 640 DR-S2350PSM 696

Mobile

w/ Louvered Shelves model # list DR-L1832PSM 551 DR-L1841PSM 597 DR-L1850PSM 642 DR-L2332PSM 569 DR-L2341PSM 624 DR-L2350PSM 677

w/ Solid Shelves model # MDR-S1832PSM MDR-S1841PSM MDR-S1850PSM MDR-S2332PSM MDR-S2341PSM MDR-S2350PSM

LIFESTOR® Utility Carts see spec sheet

EG01.41

FEATURES:

list 758 821 886 786 859 931

w/ Louvered Shelves model # list MDR-L1832PSM 752 MDR-L1841PSM 804 MDR-L1850PSM 876 MDR-L2332PSM 773 MDR-L2341PSM 843 MDR-L2350PSM 913

• Green polymer shelving sections are non-corrosive, dishwasher-safe. • Easy to assemble in minutes—only one person required. • All units feature three tiers. • Heavy duty 5˝ (127mm) diameter swivel casters with rotary bumper, two with brake. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Allows for removal or adjustment of shelves without disassembling entire cart.

Featuring MICROGARD® an antimicrobial agent which contains built-in protection to retard the growth of a broad range of bacteria, mold and mildew on shelf surface that causes stains, odors and degradation. Standard on all LIFESTOR® Shelving.

Stainless Steel Finish shelf size in. mm

18˝ width (457mm)

23˝ width (584mm)

36˝ 48˝ 36˝ 48˝

914 1219 914 1219

w/ solid shelves w/ louvered shelves model # list model # list U3-S1836PSM 1086 U3-L1836PSM 1066 U3-S1848PSM 1202 U3-L1848PSM 1173 U3-S2336PSM 1197 U3-L2336PSM 1146 U3-S2348PSM 1357 U3-L2348PSM 1286

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

EAGLEbrite® Zinc Finish w/ solid shelves model # list U3-S1836PZM 859 U3-S1848PZM 1025 U3-S2336PZM 939 U3-S2348PZM 1065

w/ louvered shelves model # list U3-L1836PZM 838 U3-L1848PZM 939 U3-L2336PZM 892 U3-L2348PZM 996

83


SHELVING / RETAIL DISPLAY Catalog Section 1

Floor-Trak® Storage System designed for LIFESTOR® Polymer Shelving see spec sheet

• Non-corrosive tracks constructed of anodized aluminum. • System is ADA-compliant. • Simple and easy to install. • Easy to add on additional tracks and units. • Open construction allows for the use of cart covers when required. • Industrial-type, hardened steel bearings allow loaded units to glide effortlessly over the track. • Single-deep only.

EG01.40

FEATURES: Note:

LIFESTOR® shelves and posts sold separately (see pages 79 & 80—not for use with LIFESTOR® starter units). Unit will tilt if not loaded properly. LOAD BOTTOM FIRST!

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

dimensions of floor track

Featuring MICROGARD® an antimicrobial agent which contains built-in protection to retard the growth of a broad range of bacteria, mold and mildew on shelf surface that causes stains, odors and degradation. Standard on all LIFESTOR® Shelving.

track

end stop skate Floor-Trak® unit shown assembled with LIFESTOR® starter unit

Floor-Trak® Kits • A pair of aluminum tracks with end stops. • All hardware and assembly instructions included. • For tracks longer than 21´(6401mm), order multiple tracks. Example: for 30´(9144mm), use one 20´(6096mm) track and one 10´(3048mm) track. ft. 6´ 7´ 8´ 9´ 10´ 11´ 12´ 13´ 14´ 15´ 16´ 17´ 18´ 19´ 20´ 21´

width mm 1829 2134 2438 2743 3048 3353 3658 3962 4267 4572 4877 5181 5486 5791 6096 6401

weight lbs. kg 5 5 6 7 8 8 9 10 11 11 12 13 14 14 15 16

2.3 2.3 2.7 3.2 3.6 3.6 4.1 4.5 5.0 5.0 5.4 5.8 6.4 6.4 6.8 6.3

cu ft 0.06 0.07 0.08 0.09 0.10 0.11 0.12 0.13 0.14 0.15 0.16 0.17 0.18 0.19 0.20 0.21

model # SDFT-6 SDFT-7 SDFT-8 SDFT-9 SDFT-10 SDFT-11 SDFT-12 SDFT-13 SDFT-14 SDFT-15 SDFT-16 SDFT-17 SDFT-18 SDFT-19 SDFT-20 SDFT-21

Bumper Brackets for Floor-Trak® Skate Kits... …sold individually Stainless steel. Set of four. model # SDSKATB-S

84

list 263

(hardware included) model # SKATB-S

list 66

list 599 679 760 840 920 1001 1081 1162 1242 1323 1403 1483 1564 1644 1724 1804

Skate Kits • Two skates and all necessary parts and hardware. • Skates are aircraft-quality aluminum with stainless steel inserts and hardened steel ball bearings. • One kit is required for each mobile unit. Note:

Skate kits require the use of one of the post kits listed in chart below.

width in. mm

weight lbs. kg

18˝ 23˝

6 7

457 584

2.7 3.2

cu ft 0.09 0.23

model # LSDSK-18 LSDSK-23

list 573 619

Post Kits for use with Floor-Trak® Skate Kits • Required for use with Skate Kits. • Each kit includes four 16 gauge type 304 posts and hardware. post height in. mm

weight lbs. kg

63˝ 74˝

17 20

1600 1880

7.7 9.0

stainless steel model # list TLEP63-S 494 TLEP74-S 563

Optional Shim Kits

Optional Foot Brake Kit

Accommodates uneven floors.

Mounts onto frontmost skate.

model # 912991

list 161

model # MFBK-S

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

list 101


SHELVING / RETAIL DISPLAY Standard on all LIFESTOR® Shelving.

MICROGARD® is an antimicrobial agent which contains built-in protection to retard the growth of a broad range of bacteria, mold and mildew on shelf surface that causes stains, odors and degradation.

Features: • Removable shelf mats are dishwasher-safe for sanitation. • Quick and easy assembly. • All units include hardware necessary for connecting units to overhead track. • Optional ledges, dividers and enclosure panels available. See pages 81 and 82. • Posts on all units are 74˝ (1880mm) and grooved in 1˝ (25mm) increments. Shelves sold separately (see page 79). • Recommended aisle widths are 30˝- 36˝ (762 - 914mm). However, larger items stored within the system may require an aisle width over 36˝ (914mm) Freight class is 70.0.

Overhead Track Polymer Storage System Components Shelves sold separately (see page 79). A front & rear overhead tracks B stationary end units C mobile units

Stationary Units

D open aisle—30˝ to 36˝ (762 to 914mm) is recommended E stationary mid unit (optional—use same model # as stationary end unit kit)

Freight class is 50.0.

see spec sheet

EG01.30

(•) MTS (made to stock) / ( ) MTO (made to order)

• Positioned on each end, and also serve as a mid unit. • The width of the end-stationary units and mid-stationary units should be the same or bigger than the width of the mobile units. • Stationary units must be bolted to the floor. • A maximum of three mobile units and 36˝ (914mm) aisle space is allowed before a mid unit is necessary. • Four 16 gauge type 304 posts, stainless steel footplates, and hardware. Note:

End-stationary units and mild-stationary units must have a minimum of four shelves.

post height in. mm 74˝

1880

weight stainless steel lbs. kg model # list 17 7.7 LEP74-S 548

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

front view

85


SHELVING / RETAIL DISPLAY Catalog Section 1

Mobile Unit Kits

Freight class is 70.0.

see spec sheet • • • • •

EG01.30

(•) MTS (made to stock) / ( ) MTO (made to order)

One 14 gauge stainless steel dolly frame. Four 5˝ (127mm) rigid poly casters Four 1˝ (25mm) thick gray PVC corner bumpers. Four 16 gauge type 304 stainless steel posts. Hardware.

Note:

Featuring MICROGARD® an antimicrobial agent which contains built-in protection to retard the growth of a broad range of bacteria, mold and mildew on shelf surface that causes stains, odors and degradation. Standard on all LIFESTOR® Shelving.

Mobile units require stainless steel or zinc side braces, not polymer (see page 80).

18˝ width (457mm)

23˝ width (584mm)

length in. mm

weight lbs. kg

36˝ 42˝ 48˝ 54˝ 60˝ 36˝ 42˝ 48˝ 54˝ 60˝

54 57 60 62 64 62 63 64 66 68

914 1067 1219 1372 1524 914 1067 1219 1372 1524

24.5 25.9 27.2 28.1 29.0 28.1 28.6 29.0 29.9 30.8

model # LMUK1836-S LMUK1842-S LMUK1848-S LMUK1854-S LMUK1860-S LMUK2336-S LMUK2342-S LMUK2348-S LMUK2354-S LMUK2360-S

list 1248 1265 1281 1304 1326 1268 1285 1301 1321 1391

side view

Overhead Track Units

Freight class is 70.0.

see spec sheet

EG01.30

(•) MTS (made to stock) / ( ) MTO (made to order)

• Front and rear 2˝ x 2˝ x 1⁄4˝ (51 x 51 x 6mm) aluminum channels for lengths up to 9´(2743mm). • Any unit 10´(3048mm) or longer will have multiple track sections. • Each section will be joined with a 2˝ x 2˝ (51 x 51mm) 14 gauge stainless steel connector and hardware to join tracks. length ft. mm 6´ 7´ 8´ 9´ 10´ 11´ 12´ 13´

1829 2134 2438 2743 3048 3353 3658 3962

weight lbs. kg model # 18 8.2 LOHT-6 21 9.5 LOHT-7 24 10.9 LOHT-8 27 12.2 LOHT-9 30 13.6 LOHT-10 33 15.0 LOHT-11 36 16.3 LOHT-12 39 17.6 LOHT-13

list 412 441 476 512 745 834 863 878

Featuring MICROGARD® an antimicrobial agent which contains built-in protection to retard the growth of a broad range of bacteria, mold and mildew on shelf surface that causes stains, odors and degradation. Standard on all LIFESTOR® Shelving.

length weight ft. mm lbs. kg model # 14´ 4267 42 19.1 LOHT-14 15´ 4572 45 20.4 LOHT-15 16´ 4877 48 21.8 LOHT-16 17´ 5181 51 23.1 LOHT-17 18´ 5486 54 24.5 LOHT-18 19´ 5791 57 25.9 LOHT-19 20´ 6096 60 27.2 LOHT-20 21´ 6401 63 28.6 LOHT-21

list 886 909 916 924 951 1178 1211 1222 top view

86

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


SHELVING / RETAIL DISPLAY Catalog Section 1 Weight Capacities Shelf Load Capacity (per shelf) Shelves not included.

Allowable Bracket Loading (per bracket)

ceiling bracket

shelf

bracket length in. mm

maximum load recommended lb. kg

shelf description

14˝ 18˝ 21˝ 24˝

540 465 395 360

Shelves 24˝ to 48˝ (610 to 1219mm) long Shelves 54˝ to 72˝ (1372 to 1829mm) long

356 457 533 610

244.9 210.9 179.2 163.3

Features:

For Use with Both Standard Wire and Solid Shelving!

• Requires no post supports to get in the way, making shelf loading and unloading easier. • 100% usable shelving surface, from section to section, wall to wall, and front to back. • Floor is unobstructed.

upright

weight capacity lb. kg 800

362.8

600

272.2

• Infinite height adjustability, no slots or keyholes to line up for leveling. • Heavy-duty, rugged construction. • Cantilever shelving components are listed on pages 88 through 91.

Freight class is 70.0. single knob bracket

Cantilever Shelving Systems

Standard Uprights see spec sheet EG01.45A FEATURES:

• 14 gauge. • Continuously seam-welded. • Rust and corrosion resistant. Note:

Freight class is 70.0.

For wall-mounted storage.

(•) MTS (made to stock) / ( ) MTO (made to order)

Gray Epoxy height in. mm 12˝ 305 24˝ 610 36˝ 914 48˝ 1219 60˝ 1524 72˝ 1829 84˝ 2134 96˝ 2438 108˝ 2743 120˝ 3048 144˝ 3658 156˝ 3962 168˝ 4267

cu ft 0.02 0.04 0.06 0.08 0.10 0.13 0.15 0.17 0.19 0.21 0.23 0.25 0.30

weight lb. kg 1 0.5 3 1.4 4 1.8 6 2.7 7 3.2 9 4.1 10 4.5 11 5.0 13 5.8 14 6.4 17 7.7 20 9.0 23 10.4

REGULAR model # list MMU-1 23 MMU-2 42 MMU-3 66 MMU-4 78 MMU-5 98 MMU-6 116 MMU-7 137 MMU-8 157 MMU-9 178 MMU-10 199 MMU-12 243 MMU-14 285 MMU-16 324

Prices do not include ceiling brackets.

NSF model # MMNSU-1 MMNSU-2 MMNSU-3 MMNSU-4 MMNSU-5 MMNSU-6 MMNSU-7 MMNSU-8 MMNSU-9 MMNSU-10 MMNSU-12 n/a n/a

Stainless Steel list 26 44 70 84 106 124 148 170 193 213 262 n/a n/a

weight lb. kg 1 0.5 3 1.4 4 1.8 5 2.3 7 3.2 8 3.6 9 4.1 11 5.0 12 5.4 13 5.8 16 7.3 -

REGULAR model # list MMUSS-1 79 MMUSS-2 142 MMUSS-3 215 MMUSS-4 283 MMUSS-5 357 MMUSS-6 423 MMUSS-7 493 MMUSS-8 563 MMUSS-9 631 MMUSS-10 701 MMUSS-12 843 n/a n/a n/a n/a

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

NSF model # MMNSUSS-1 MMNSUSS-2 MMNSUSS-3 MMNSUSS-4 MMNSUSS-5 MMNSUSS-6 MMNSUSS-7 MMNSUSS-8 MMNSUSS-9 MMNSUSS-10 MMNSUSS-12 n/a n/a

Aluminum weight list lb. kg 84 1 0.5 148 2 0.9 223 2 0.9 299 3 1.4 376 4 1.8 444 4 1.8 519 5 2.3 590 6 2.7 664 7 3.2 738 7 3.2 885 9 4.1 n/a 10 4.5 n/a 12 5.4

REGULAR model # list MMU/A-1 23 MMU/A-2 42 MMU/A-3 66 MMU/A-4 78 MMU/A-5 98 MMU/A-6 116 MMU/A-7 137 MMU/A-8 157 MMU/A-9 178 MMU/A-10 199 MMU/A-12 243 MMU/A-14 285 MMU/A-16 324

NSF model # list MMNSU/A-1 26 MMNSU/A-2 44 MMNSU/A-3 70 MMNSU/A-4 84 MMNSU/A-5 106 MMNSU/A-6 124 MMNSU/A-7 148 MMNSU/A-8 170 MMNSU/A-9 192 MMNSU/A-10 213 MMNSU/A-12 262 MMNSU/A-14 305 MMNSU/A-16 370

87


SHELVING / RETAIL DISPLAY Catalog Section 1

Back-To-Back Uprights — Floor-To-Ceiling see spec sheet EG01.45A

FEATURES:

• Attaches to floor and ceiling. • Two uprights are bolted or welded back-to-back. Note:

Prices do not include ceiling brackets.

Freight class is 70.0.

For center room storage.

(•) MTS (made to stock) / ( ) MTO (made to order)

Gray Epoxy height in. mm 48˝ 1219 60˝ 1524 72˝ 1829 84˝ 2134 96˝ 2438 108˝ 2743 120˝ 3048 144˝ 3658

cu ft 0.29 0.37 0.44 0.51 0.59 0.66 0.73 0.88

weight lb. kg 11 5.0 14 6.4 17 7.7 20 9.0 23 10.4 26 11.8 29 13.2 34 15.4

REGULAR model # list MMBB/FC-4 169 MMBB/FC-5 210 MMBB/FC-6 255 MMBB/FC-7 299 MMBB/FC-8 343 MMBB/FC-9 387 MMBB/FC-10 534 MMBB/FC-12 550

Stainless Steel

NSF model # MMNSBB/FC-4 MMNSBB/FC-5 MMNSBB/FC-6 MMNSBB/FC-7 MMNSBB/FC-8 MMNSBB/FC-9 MMNSBB/FC-10 MMNSBB/FC-12

list 183 229 276 323 372 419 466 578

weight lb. kg 11 5.0 24 10.9 28 12.7 33 15.0 38 17.2 42 19.1 47 21.3 57 25.9

REGULAR model # MMBBSS/FC-4 MMBBSS/FC-5 MMBBSS/FC-6 MMBBSS/FC-7 MMBBSS/FC-8 MMBBSS/FC-9 MMBBSS/FC-10 MMBBSS/FC-12

Heavy-Duty Back-To-Back Uprights — Floor-To-Ceiling see spec sheet EG01.45C

list 566 710 843 984 1122 1262 1401 1684

FEATURES:

Aluminum

NSF model # MMNSBBSS/FC-4 MMNSBBSS/FC-5 MMNSBBSS/FC-6 MMNSBBSS/FC-7 MMNSBBSS/FC-8 MMNSBBSS/FC-9 MMNSBBSS/FC-10 MMNSBBSS/FC-12

list 649 816 969 1131 1290 1450 1613 1934

weight lb. kg 11 5.0 14 6.4 17 7.7 20 9.0 23 10.4 26 11.8 29 13.2 34 15.4

REGULAR model # MMBB/FC/A-4 MMBB/FC/A-5 MMBB/FC/A-6 MMBB/FC/A-7 MMBB/FC/A-8 MMBB/FC/A-9 MMBB/FC/A-10 MMBB/FC/A-12

list 169 210 255 299 343 387 534 550

• Double-faced unitized uprights. • Attaches to floor and ceiling. • Two uprights are bolted or welded back-to-back. Note:

Prices do not include ceiling brackets.

For center room storage.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Gray Epoxy height in. mm 48˝ 1219 60˝ 1524 72˝ 1829 84˝ 2134 96˝ 2438 108˝ 2743 120˝ 3048 144˝ 3658

cu ft 0.29 0.37 0.44 0.51 0.59 0.66 0.73 0.88

weight lb. kg 20 9.0 25 11.3 30 13.6 35 15.9 40 18.1 45 20.4 50 22.7 60 27.2

REGULAR model # list MMBB-4 328 MMBB-5 387 MMBB-6 465 MMBB-7 543 MMBB-8 622 MMBB-9 700 MMBB-10 778 MMBB-12 930

Stainless Steel

NSF model # MMNSBB-4 MMNSBB-5 MMNSBB-6 MMNSBB-7 MMNSBB-8 MMNSBB-9 MMNSBB-10 MMNSBB-12

list 372 445 534 622 709 798 891 1067

weight lb. kg 11 5.0 24 10.9 28 12.7 33 15.0 38 17.2 42 19.1 47 21.3 57 25.9

REGULAR model # MMBBSS-4 MMBBSS-5 MMBBSS-6 MMBBSS-7 MMBBSS-8 MMBBSS-9 MMBBSS-10 MMBBSS-12

list 759 955 1150 1342 1533 1723 1914 2306

Aluminum

NSF model # MMNSBBSS-4 MMNSBBSS-5 MMNSBBSS-6 MMNSBBSS-7 MMNSBBSS-8 MMNSBBSS-9 MMNSBBSS-10 MMNSBBSS-12

Ceiling Brackets for Standard and Back-To-Back Uprights

list 871 1097 1322 1537 1757 1978 2198 2634

weight lb. kg 14 6.4 17 7.7 21 9.5 24 10.9 28 12.7 31 14.1 34 15.4 41 18.6

REGULAR model # MMBB/A-4 MMBB/A-5 MMBB/A-6 MMBB/A-7 MMBB/A-8 MMBB/A-9 MMBB/A-10 MMBB/A-12

list 333 377 450 529 602 680 753 906

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

see spec sheet EG01.45B

Gray Epoxy REGULAR NSF description model # list model # left right

88

MMCB-6-L MMCB-6-R

24 MMNSCB-6-L 24 MMNSCB-6-R

Stainless Steel REGULAR list model # 24 MMCBSS-6-L 24 MMCBSS-6-R

Aluminum NSF

list model # 53 MMNSCBSS-6-L 51 MMNSCBSS-6-R

REGULAR NSF list model # list model # 53 MMCB/A6-L 53 MMCB/A6-R

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

34 MMNSCB/A6-L 34 MMNSCB/A6-R

list 34 34


SHELVING / RETAIL DISPLAY Catalog Section 1

Heavy Duty Crossbraces see spec sheet EG01.45C

FEATURES:

• Adds to stability of unit. • 1˝ (25mm) wide 7-gauge steel. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

crossbracing

Gray Epoxy fits crossbrace shelf length length weight in. mm in. mm lb. kg 36˝ 48˝ 60˝ 72˝

914 1219 1524 1829

48˝ 60˝ 72˝ 84˝

1219 1524 1829 2134

2 3 4 5

Single Knob Brackets see spec sheet EG01.45B

FEATURES:

0.9 1.4 1.8 2.3

Nickel

model # MMXB-48 MMXB-60 MMXB-72 MMXB-84

list 24 29 34 40

weight lb. kg 2 3 4 5

0.9 1.4 1.8 2.3

model # MMXB-N-48 MMXB-N-60 MMXB-N-72 MMXB-N-84

list 64 78 93 108

• With flange on top left or right, these brackets support single shelf or end of shelf run. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

right single knob bracket

Left Single Knob Brackets Gray Epoxy length in. mm 14˝ 356 18˝ 457 21˝ 533 24˝ 610

cu ft 0.09 0.12 0.15 0.17

weight lb. kg 2 0.9 3 1.4 3 1.4 3 1.4

REGULAR model # list MMB-K-14-L 57 MMB-K-18-L 71 MMB-K-21-L 79 MMB-K-24-L 87

Stainless Steel

NSF model # MMNSB-K-14-L MMNSB-K-18-L MMNSB-K-21-L MMNSB-K-24-L

list 65 78 87 95

weight lb. kg 2 0.9 2 0.9 3 1.4 3 1.4

Right Single Knob Brackets Gray Epoxy length in. mm 14˝ 356 18˝ 457 21˝ 533 24˝ 610

cu ft 0.09 0.12 0.15 0.17

weight lb. kg 2 0.9 3 1.4 3 1.4 3 1.4

REGULAR model # list MMB-K-14-R 57 MMB-K-18-R 71 MMB-K-21-R 79 MMB-K-24-R 87

REGULAR model # MMBSS-K-14-L MMBSS-K-18-L MMBSS-K-21-L MMBSS-K-24-L

list 126 172 205 221

Aluminum

NSF model # MMNSBSS-K-14-L MMNSBSS-K-18-L MMNSBSS-K-21-L MMNSBSS-K-24-L

NSF model # MMNSB-K-14-R MMNSB-K-18-R MMNSB-K-21-R MMNSB-K-24-R

list 65 78 87 95

weight lb. kg 2 0.9 2 0.9 3 1.4 3 1.4

REGULAR model # MMBSS-K-14-R MMBSS-K-18-R MMBSS-K-21-R MMBSS-K-24-R

list 126 172 205 221

FEATURES:

Gray Epoxy REGULAR model # list MMDB-K-14 100 MMDB-K-18 116 MMDB-K-21 129 MMDB-K-24 134

list 133 177 216 231

weight lb. kg 1 0.5 1 0.5 1 0.5 2 0.9

model # MMNSDB-K-14 MMNSDB-K-18 MMNSDB-K-21 MMNSDB-K-24

list 99 129 142 147

weight lb. kg 3 1.4 3 1.4 4 1.8 4 1.8

REGULAR model # MMDBSS-K-14 MMDBSS-K-18 MMDBSS-K-21 MMDBSS-K-24

NSF model # list MMNSB-K/A-14-L 71 MMNSB-K/A-18-L 83 MMNSB-K/A-21-L 92 MMNSB-K/A-24-L 106

REGULAR model # MMB-K/A-14-R MMB-K/A-18-R MMB-K/A-21-R MMB-K/A-24-R

list 66 74 84 95

NSF model # list MMNSB-K/A-14-R 71 MMNSB-K/A-18-R 83 MMNSB-K/A-21-R 92 MMNSB-K/A-24-R 106

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Stainless Steel NSF

list 66 74 84 95

• With flanges on top left and right, these brackets support two adjoining wire or solid shelves on a common upright.

For use with wire or solid shelving weight lb. kg 3 1.4 4 1.8 4 1.8 5 2.3

REGULAR model # MMB-K/A-14-L MMB-K/A-18-L MMB-K/A-21-L MMB-K/A-24-L

Aluminum

NSF model # MMNSBSS-K-14-R MMNSBSS-K-18-R MMNSBSS-K-21-R MMNSBSS-K-24-R

see spec sheet EG01.45B

cu ft 0.19 0.25 0.29 0.33

weight lb. kg 1 0.5 1 0.5 1 0.5 2 0.9

Stainless Steel

Double Knob Brackets

length in. mm 14˝ 356 18˝ 457 21˝ 533 24˝ 610

list 133 177 216 231

Aluminum NSF

list 176 244 294 320

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

model # MMNSDBSS-K-14 MMNSDBSS-K-18 MMNSDBSS-K-21 MMNSDBSS-K-24

list 187 258 309 330

weight lb. kg 1 0.5 2 0.9 2 0.9 2 0.9

REGULAR model # MMDB-K/A-14 MMDB-K/A-18 MMDB-K/A-21 MMDB-K/A-24

list 99 129 137 145

NSF model # MMNSDB-K/A-14 MMNSDB-K/A-18 MMNSDB-K/A-21 MMNSDB-K/A-24

list 109 141 150 160

89


SHELVING / RETAIL DISPLAY Catalog Section 1

Optional Single Foot Brackets with Knobs see spec sheet EG01.45B FEATURES:

• Serves as a base for bottom shelf. • Left brackets and right brackets available. • 93⁄8˝ (238mm) height. Freight class is 70.0.

For use with wire and solid shelving

(•) MTS (made to stock) / ( ) MTO (made to order)

Left Single Foot Brackets with Knobs Gray Epoxy length in. mm 14˝ 356 18˝ 457 21˝ 533 24˝ 610

cu ft 0.13 0.17 0.19 0.21

weight lb. kg 4 1.8 5 2.3 6 2.7 6 2.7

REGULAR model # list MMFB-K-14-L 97 MMFB-K-18-L 115 MMFB-K-21-L 131 MMFB-K-24-L 142

Stainless Steel

NSF model # MMNSFB-K-14-L MMNSFB-K-18-L MMNSFB-K-21-L MMNSFB-K-24-L

list 107 127 145 157

weight lb. kg 4 1.8 6 2.7 7 3.2

REGULAR model # MMFBSSK-149-L MMFBSSK-189-L n/a MMFBSSK-249-L

Right Single Foot Brackets with Knobs Gray Epoxy length in. mm 14˝ 356 18˝ 457 21˝ 533 24˝ 610

cu ft 0.13 0.17 0.19 0.21

weight lb. kg 4 1.8 5 2.3 6 2.7 6 2.7

REGULAR model # list MMFB-K-14-R 97 MMFB-K-18-R 115 MMFB-K-21-R 131 MMFB-K-24-R 142

NSF model # MMNSFB-K-14-R MMNSFB-K-18-R MMNSFB-K-21-R MMNSFB-K-24-R

list 281 374 n/a 483

NSF model # MMNSFBSSK-149-L MMNSFBSSK-189-L n/a MMNSFBSSK-249-L

list 324 427 n/a 552

Stainless Steel list 107 127 145 157

weight lb. kg 4 1.8 6 2.7 7 3.2

REGULAR model # MMFBSSK-149-R MMFBSSK-189-R n/a MMFBSSK-249-R

list 281 374 n/a 483

Optional Double Foot Brackets with Knobs see spec sheet EG01.45B FEATURES:

NSF model # MMNSFBSSK-149-R MMNSFBSSK-189-R n/a MMNSFBSSK-249-R

list 324 427 n/a 552

• For use with wire or solid shelving. • Serves as a base for adjoining two bottom shelves. • 93⁄8˝ (238mm) height. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Gray Epoxy length in. mm 14˝ 356 18˝ 457 21˝ 533 24˝ 610

90

cu ft 0.26 0.33 0.39 0.42

weight lb. kg 4 1.8 5 2.3 6 2.7 7 3.2

REGULAR model # list MMDFB-K-14 156 MMDFB-K-18 202 MMDFB-K-21 224 MMDFB-K-24 231

NSF model # MMNSDFB-K-14 MMNSDFB-K-18 MMNSDFB-K-21 MMNSDFB-K-24

Stainless Steel list 171 226 243 253

weight lb. kg 5 2.3 7 3.2 8 3.6

REGULAR model # MMDFBSSK-149 MMDFBSSK-189 n/a MMDFBSSK-249

list 322 412 n/a 550

NSF model # MMNSDFBSSK-149 MMNSDFBSSK-189 n/a MMNSDFBSSK-249

list 373 476 n/a 631

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


SHELVING / RETAIL DISPLAY Catalog Section 1

Heavy Duty Single Knob “C” Brackets see spec sheet EG01.45C

FEATURES:

• For dynamic loads. • For use with wire or solid shelving. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Left Single Knob Brackets Gray Epoxy length in. mm 18˝ 457 21˝ 533 24˝ 610

cu ft 0.12 0.15 0.17

weight lb. kg 3 1.4 3 1.4 3 1.4

REGULAR model # list MMBC-K-18-L 69 MMBC-K-21-L 78 MMBC-K-24-L 88

NSF model # list MMNSBC-K-18-L 73 MMNSBC-K-21-L 84 MMNSBC-K-24-L 93

Stainless Steel weight lb. kg 2 0.9 3 1.4 3 1.4

Right Single Knob Brackets Gray Epoxy length in. mm 18˝ 457 21˝ 533 24˝ 610

cu ft 0.12 0.15 0.17

weight lb. kg 3 1.4 3 1.4 3 1.4

REGULAR model # list MMBC-K-18-R 69 MMBC-K-21-R 78 MMBC-K-24-R 88

NSF model # list MMNSBC-K-18-R 73 MMNSBC-K-21-R 84 MMNSBC-K-24-R 93

REGULAR model # MMBCSS-K-18-L MMBCSS-K-21-L MMBCSS-K-24-L

list 127 157 186

Aluminum

NSF model # MMNSBCSS-K-18-L MMNSBCSS-K-21-L MMNSBCSS-K-24-L

list 133 171 201

weight lb. kg 1 0.5 1 0.5 2 0.9

Stainless Steel weight lb. kg 2 0.9 3 1.4 3 1.4

REGULAR model # MMBCSS-K-18-R MMBCSS-K-21-R MMBCSS-K-24-R

list 127 157 186

see spec sheet EG01.45C FEATURES:

list 64 73 78

NSF model # list MMNSBC-K/A-18-L 69 MMNSBC-K/A-21-L 78 MMNSBC-K/A-24-L 84

Aluminum

NSF model # list MMNSBCSS-K-18-R 133 MMNSBCSS-K-21-R 171 MMNSBCSS-K-24-R 201

Heavy Duty Double Knob “C” Brackets

REGULAR model # MMBC-K/A-18-L MMBC-K/A-21-L MMBC-K/A-24-L

weight lb. kg 1 0.5 1 0.5 2 0.9

REGULAR model # list MMBC-K/A-18-R 64 MMBC-K/A-21-R 73 MMBC-K/A-24-R 78

NSF model # list MMNSBC-K/A-18-R 69 MMNSBC-K/A-21-R 78 MMNSBC-K/A-24-R 84

• For dynamic loads. • With flanges on top left and right, these brackets support two adjoining wire or solid shelves on a common upright. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Gray Epoxy length in. mm 18˝ 457 21˝ 533 24˝ 610

cu ft 0.25 0.29 0.33

weight lb. kg 4 1.8 4 1.8 5 2.3

REGULAR model # list MMDBC-K-18 113 MMDBC-K-21 127 MMDBC-K-24 133

NSF model # list MMNSDBC-K-18122 MMNSDBC-K-21137 MMNSDBC-K-24142

Stainless Steel weight lb. kg 3 1.4 4 1.8 4 1.8

REGULAR model # MMDBCSS-K-18 MMDBCSS-K-21 MMDBCSS-K-24

list 191 220 244

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

NSF model # MMNSDBCSS-K-18 MMNSDBCSS-K-21 MMNSDBCSS-K-24

Aluminum list 201 235 264

weight lb. kg 2 0.9 2 0.9 2 0.9

REGULAR model # list MMDBC-K/A-18 102 MMDBC-K/A-21 117 MMDBC-K/A-24 127

NSF model # MMNSDBC-K/A-18 MMNSDBC-K/A-21 MMNSDBC-K/A-24

list 113 126 127

91


NOTES ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________

92

____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


Wall Shelves Adjustable Post Wire Wall Mounts Sold as Components............................................................102 Sold as Prepackaged Units ..................................................101

Snap-n-Slide® Wall Shelves ..........................................................................96 Wire Wall Shelves ..................................................................97 with Ticket Rail ......................................................................97

Piggyback Wall Mounted Shelf Kits ......................................98 Shelves with Pot Racks ........................................................99 Single Bar Pot Racks ............................................................97 Stationary Wire Wall Mounts ..............................................102 Tab Lock Shelves ................................................................100 Wall Mounted Shelves ..........................................................98 Wire Wall Shelf Kits ..............................................................97

WALSTOR® Modular Wall System ....................94

Wall Shelves Microwave Shelves ..............................................................100 Pass-Thru Shelves ..............................................................100

WALSTOR® Modular Wall System Accessories ..............................................95

Wall Mounted Drop Tables/Shelves see product announcement

EG8134 FEATURES:

• 3/4˝ (19mm) thick shelf. • Pair of chrome-plated drop brackets. • Weight capacity of 80 lbs. (36.3 kg). Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Convert wasted wall space into an organized work area.

Richlite® **

Poly * width length in. mm in. mm 10˝ 10˝ 10˝

254 254 254

24˝ 30˝ 36˝

610 762 914

12˝ 12˝ 12˝

305 305 305

24˝ 30˝ 36˝

610 762 914

weight lb. kg model # 7 3.2 DSP-1024 9 4.1 DSP-1030 11 5.0 DSP-1036 8 3.6 DSP-1224 10 4.5 DSP-1230 12 5.4 DSP-1236

list 222 232 245 229 241 256

weight lb. kg 7 9 11

3.2 4.1 5.0

8 10 12

3.6 4.5 5.4

model # DSR-1024 DSR-1030 DSR-1036 DSR-1224 DSR-1230 DSR-1236

16/3 Stainless Steel list 336 383 434 364 366 493

weight lb. kg 11 13 15

5.0 5.9 6.8

12 14 16

5.4 6.4 7.3

model # DSS-1024 DSS-1030 DSS-1036 DSS-1224 DSS-1230 DSS-1236

list 261 266 277 263 276 285

* Poly tables/shelves can withstand hot items up to 180˚F without discoloration. ** Richlite® tables/shelves can withstand hot items up to 350˚F without discoloration.

drop bracket

shown in dropped-down position

93


WALL SHELVES Catalog Section 2

WalStor® system shown demonstrating an uneven load capability. Note:

Modular Wall System see spec sheet EG02.00A

Wall Mats

Walstor® must be mounted to a solid surface or studs in a wall. User needs to determine installation materials and methods suitable to hold and support the Walstor® system.

Freight class is 70.0.

• 3˝ x 3˝ (76 x 76mm) zinc-plated grids. • Required only for hanging accessories. height

length in. mm

36˝ 18˝ (457mm) 48˝ 60˝ 48˝ 24˝ (609mm) 72˝ 84˝ 96˝ 33˝ (838mm) 54˝ 48˝ (1219mm) 48˝

914 1219 1524 1219 1828 2133 2438 1372 1219

weight lbs. kg 9 11 14 13 19 22 25 22 19

(•) MTS (made to stock) / ( ) MTO (made to order)

cubic feet

4.1 5.0 6.4 5.8 8.6 9.9 11.3 9.9 8.6

0.2 0.3 0.3 0.3 0.5 0.6 0.7 0.5 0.7

model # WM1836 • WM1848 • WM1860 WM2448 • WM2472 WM2484 WM2496 WM3354 WM4848

list 76 99 114 115 133 159 168 194 188

Single Shelf Kits • • • •

One EAGLEbrite® shelf. One wall mat. One pair of 30˝ (762mm) vertical wall uprights. One pair of 18˝ (457mm) wire shelf brackets. shelf and wall mat size weight in. mm lbs. kg

Vertical Wall Uprights • Zinc-plated finish. • Sold in pairs.

18˝ width (457mm)

height in. mm

weight lbs. kg

cu ft

12˝ 30˝ 45˝

2 4 5

0.2 0.4 0.5

305 762 1143

0.9 1.8 2.3

model # PR12VU • PR30VU • PR45VU •

list 44 72 89

14˝ 18˝ 21˝ 24˝

3 4 4 5

356 457 533 610

1.5 2.0 2.0 2.0

cubic feet 0.1 0.1 0.1 0.1

15.9 16.3

• • • • model # PR14B • PR18B • PR21B PR24B

list 97 104 108 139

Two EAGLEbrite® shelves. Two wall mats. One pair of 45˝ (1143mm) vertical wall uprights. Two pairs of 18˝ (457mm) wire shelf brackets. shelf dimensions weight cubic in. mm lbs. kg feet

18˝ width (457mm)

36˝ 48˝

914 1219

41 49

18.6 22.2

Wall Grid Shelving - see spec sheet EG02.00C width x length in. mm 14˝ x 30˝ 356 x 762 14˝ x 36˝ 356 x 914 18˝ x 30˝ 457 x 762 18˝ x 36˝ 457 x 914 18˝ x 48˝ 457 x 1219

94

weight cubic lbs. kg feet 7 9 9 12 15

3.2 4.1 4.1 5.4 6.8

3.1 3.6 3.7 4.5 6.0

list 319 353

Double Shelf Kits

• Zinc-plated finish. • Sold in pairs. weight lbs. kg

914 35 1219 36

wall mats and vertical wall uprights

Wire Shelf Brackets

depth in. mm

36˝ 48˝

cu ft model # 3.5 WAL-1-1836 4.5 WAL-1-1848

chrome model # 1430WGS-C 1436WGS-C 1830WGS-C 1836WGS-C 1848WGS-C

list 108 113 115 120 139

Valu-Gard® model # 1430WGS-VG 1436WGS-VG 1830WGS-VG 1836WGS-VG 1848WGS-VG •

list 112 116 119 124 143

EAGLEbrite® model # list 1430WGS-Z 100 1436WGS-Z 105 1830WGS-Z 108 1836WGS-Z 111 1848WGS-Z 128

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

2.0 2.4

model # list WAL-2-1836 479 WAL-2-1848 574


WALL SHELVES Catalog Section 2 Custom configurations allow you to personalize your Walstor® system for merchandise displays or over-theworkstation storage. Engineered with the idea that a perfect storage system adapts easily to individual requirements.

Modular Wall System Accessories

Freight class is 70.0.

see spec sheet EG02.00B

(•) MTS (made to stock) / ( ) MTO (made to order)

shelf collar plugs Model #: COLLAR PLUG (4 per shelf required)

large** snap hook

small** snap hook

WalStor® system with optional accessories shown

utensil** hook

light duty utility shelf

grid shelf

towel rack

spice rack

See page 70 for display shelves. Specify Universal Nolin (manufacturer ID #2). Requires a pair of DSS (display shelf standards).

merchandising** display hook

plastic bin holder

hanging file holder

small bin

⁄3-size pan holder

book holder

triangle shelf

Vertical uprights for display shelf large bin

large** double hook

grid panel basket

1

grid panel wall bracket

length x width x height description

in.

mm

⁄3 size pan holder 12˝ x 8˝ x 3˝ book holder 3˝ x 12˝ x 10˝ vertical uprights 2˝ x 83⁄4˝ drop basket 22˝ x 18˝ x 11˝ (for 18˝ wire shelf) grid shelf 163⁄4˝ x 163⁄4˝ hanging file holder 12˝ x 8˝ x 3˝ large double hook 21⁄4˝ x 41⁄4˝ x 3⁄8˝ large plastic bin 107⁄8˝ x 11˝ x 5˝ 1

large snap hook

21⁄4˝ x 41⁄4˝ x 3⁄8˝

lt. duty utility shelf 111⁄4˝ x 8˝ x 31⁄2˝ merch. dspl hook 4˝ x 3˝ merch. dspl hook 6˝ x 3˝ merch. dspl hook 8˝ x 3˝ merch. dspl hook 10˝ x 3˝

wire basket

drop basket weight

cu

lbs. kg

length x width x height

305 x 203 x 76 76 x 305 x 254 51 x 222 559 x 457 x 280

1.0 2.0 2.0 3.0

0.5 0.9 0.9 1.4

ft model # list 0.2 PH3RD 48 0.2 BH-1 137 0.3 DSS 93 0.3 DB 103

426 x 426 305 x 203 x 76 57 x 108 x 3 276 x 280 x 127

4.0 1.0 0.3 1.0

1.8 0.5 0.1 0.5

0.6 0.2 0.1 0.3

57 x 108 x 3 286 x 203 x 89 101 x 76 152 x 76 203 x 76 254 x 76

0.3 0.1 0.1 2.0 0.2 0.2 0.2 0.2

*A203877 requires (1) PBH. A203879 requires (2) PBH.

0.9 0.1 0.1 0.1 0.1

0.2 0.1 0.1 0.1 0.1

GS17 135 HFH 47 LDH ** • 9 A203879 * 21 LH ** • 7 LDUS12 57 MDH-4 ** 13 MDH-6 ** 14 MDH-8 ** 18 MDH-10 ** 19

description merch. dspl hook plastic bin dividers plastic bin holder small plastic bin small snap hook spice rack spice rack towel rack utensil hook wire basket 2-deck can rack 4-deck can rack wall bracket triangle shelf grid panel basket

in.

mm

12˝ x 3˝ 107⁄8˝ x 5˝ 4˝ x 2˝ 107⁄8˝ x 51⁄2˝ x 5˝ 11⁄4˝ x 41⁄4˝ x 3⁄8˝ 14˝ x 2˝ 24˝ x 2˝ 101⁄2˝ x 5˝ x 3.5˝ 21⁄2˝ x 2˝ 133⁄8˝ x 5˝ x 7˝ 85⁄8˝ x 13˝ x 14˝ 81⁄4˝ x 81⁄2˝ x 281⁄2˝ 3˝ x 4˝ x 4˝ 24˝ x 24˝ 15˝ x 24˝

304 x 76 276 x 127 102 x 51 276 x 140 x 127 32 x 127 x 76 356 x 51 610 x 51 267 x 127 x 76 64 x 51 340 x 127 x 178 219 x 330 x 356 210 x 216 x 724 76 x 102 x 102 610 x 610 381 x 610

weight cu lbs. kg 0.2 2.0 0.3 0.75 0.3 1.0 1.5 1.0 0.3 0.5 1.0 3.0 0.2 3.6 2.8

0.1 0.9 0.1 0.3 0.1 0.5 0.7 0.5 0.1 0.2 0.5 1.3 0.1 1.6 1.2

ft model # list MDH-12** 21 A204237 18 PBH • 35 A203877 * 16 SH ** • 4 SR14 59 SR24 63 TR10 47 UH ** • 11 WB • 31 CR2D 155 CR4D 173 GPWB 20 GPS24-C 67 GBP15-C 75

0.1 0.1 0.4 0.2 0.1 0.1 0.2 0.3 0.1 0.2 0.1 1.2 0.1 0.5 0.4

**All hooks are heavy gauge chrome-plated.

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

95


WALL SHELVES Catalog Section 2

Snap-n-Slide® Wall Shelves see spec sheet

EG02.01

FEATURES:

• Brackets can be mounted to wall studs – no wall backing required. • 11⁄2˝ (38mm) upturn on rear and ends. • Heavy gauge stainless steel construction. • No tools required to attach shelf to wall brackets. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Optional Dividers for Snap-n-Slide® Wall Shelves • 4˝ (102mm) height. description

model # 358114 358115

for 12˝ (305mm) shelving for 15˝ (381mm) shelving

list 36 38

12˝ (305mm) wide Snap-n-Slide® Shelves with Rolled Front Edge length in. mm

weight lbs. kg

24˝ 36˝ 48˝ 60˝ 72˝

12 14 17 23 25

610 915 1219 1524 1829

5.4 6.4 7.7 10.4 11.3

wt. capacity* lbs. kg 90 135 180 225 270

40.8 61.2 81.6 102.1 122.5

cu ft 0.7 1.1 1.4 1.8 2.1

16 gauge type 430 model # list SWS1224-16/4 • 220 SWS1236-16/4 • 238 SWS1248-16/4 • 293 SWS1260-16/4 • 311 SWS1272-16/4 • 385

16 gauge type 304 model # list SWS1224-16/3 • 265 SWS1236-16/3 • 335 SWS1248-16/3 • 371 SWS1260-16/3 • 405 SWS1272-16/3 • 499

14 gauge type 304 model # list SWS1224-14/3 280 SWS1236-14/3 • 358 SWS1248-14/3 • 399 SWS1260-14/3 432 SWS1272-14/3 545

15˝ (381mm) wide Snap-n-Slide® Shelves with Rolled Front Edge length in. mm

weight lbs. kg

24˝ 36˝ 48˝ 60˝ 72˝

15 17 21 28 30

610 915 1219 1524 1829

6.8 7.7 9.5 12.7 13.6

wt. capacity* lbs. kg 90 135 180 225 270

40.8 61.2 81.6 102.1 122.5

cu ft 1.1 1.7 2.2 2.7 3.3

16 gauge type 430 16 gauge type 304 model # list model # list SWS1524-16/4 238 SWS1524-16/3 289 SWS1536-16/4 • 245 SWS1536-16/3 • 344 SWS1548-16/4 • 296 SWS1548-16/3 • 420 SWS1560-16/4 • 321 SWS1560-16/3 • 461 SWS1572-16/4 392 SWS1572-16/3 574

14 gauge type 304 model # list SWS1524-14/3 315 SWS1536-14/3 389 SWS1548-14/3 473 SWS1560-14/3 488 SWS1572-14/3 649

15˝ (381mm) wide Snap-n-Slide® Shelves with “V” Marine Front Edge 14 gauge length in. mm

weight lbs. kg

24˝ 36˝ 48˝ 60˝ 72˝

15 17 21 28 30

610 915 1219 1524 1829

6.8 7.7 9.5 12.7 13.6

wt. capacity* lbs. kg 90 135 180 225 270

40.8 61.2 81.6 102.1 122.5

cu ft 1.1 1.7 2.2 2.7 3.3

14 gauge type 304 model # SWS1524-14/304-VMAR SWS1536-14/304-VMAR SWS1548-14/304-VMAR SWS1560-14/304-VMAR SWS1572-14/304-VMAR

list 409 429 558 619 732

14 gauge type 316 model # SWS1524-14/316-VMAR SWS1536-14/316-VMAR SWS1548-14/316-VMAR SWS1560-14/316-VMAR SWS1572-14/316-VMAR

list 456 529 656 738 866

15˝ (381mm) wide Snap-n-Slide® Shelves with “V” Marine Front Edge 16 gauge length in. mm

weight lbs. kg

wt. capacity* lbs. kg

cu ft

24˝ 36˝ 48˝ 60˝ 72˝

15 17 21 28 30

90 135 180 225 270

1.1 1.7 2.2 2.7 3.3

610 915 1219 1524 1829

6.8 7.7 9.5 12.7 13.6

40.8 61.2 81.6 102.1 122.5

16 gauge type 430 model # SWS1524-16/430-VMAR SWS1536-16/430-VMAR SWS1548-16/430-VMAR SWS1560-16/430-VMAR SWS1572-16/430-VMAR

list 358 387 457 491 578

16 gauge type 304 model # SWS1524-16/304-VMAR SWS1536-16/304-VMAR SWS1548-16/304-VMAR SWS1560-16/304-VMAR SWS1572-16/304-VMAR

list 402 447 534 586 688

* Weight capacities pertain to evenly distributed weight.

96

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


WALL SHELVES Catalog Section 2 • Wire design allows for air circulation. • Brackets can be mounted to studs with no backing required.

Snap-n-Slide® Wire Wall Shelves see spec sheet

EG02.02 FEATURES:

Note:

See page 96 for Snap-n-Slide® with solid shelves.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

length in. mm

weight * capacity lbs. kg

cu ft

VALU-MASTER® model # list SNSW1224V 106 SNSW1236V 141 SNSW1248V 175 SNSW1260V 189 SNSW1272V 243

chrome model #

24˝ 610 70 31.8 0.7 SNSW1224C 12˝ 36˝ 915 105 47.6 1.1 SNSW1236C 140 63.5 1.4 SNSW1248C width 48˝ 1219 (305mm) 60˝ 1524 175 79.5 1.8 SNSW1260C 72˝ 1829 210 95.3 2.1 SNSW1272C * Weight capacity pertains to evenly distributed weight.

list 101 133 166 180 231

Snap-n-Slide® Wall Shelves with Ticket Rail see spec sheet

12˝ width (305mm)

EG02.03 FEATURES:

length weight weight cap. cu in. mm lbs. kg lbs. kg ft model # 12˝ 305 8 3.6 45 20.4 0.4 SWS1212TR-16/4 18˝ 457 10 4.5 68 30.8 0.5 SWS1218TR-16/4 24˝ 610 14 6.4 90 40.8 0.7 SWS1224TR-16/4 36˝ 915 17 7.7 135 61.2 1.1 SWS1236TR-16/4 48˝ 1219 21 9.5 180 81.6 1.4 SWS1248TR-16/4 60˝ 1524 28 12.7 225 102.1 1.8 SWS1260TR-16/4 72˝ 1829 31 14.1 270 122.5 2.1 SWS1272TR-16/4 96˝ 2438 39 17.6 360 163.3 2.8 SWS1296TR-16/4

ALUMINUM

STAINLESS STEEL weight list lbs. kg model # 379 9 4.1 SBPR-24-S 399 12 5.4 SBPR-36-S 411 15 6.8 SBPR-48-S 422 18 8.2 SBPR-60-S 436 21 9.5 SBPR-72-S 446 25 11.3 SBPR-84-S 492 29 13.2 SBPR-96-S 541 34 15.4 SBPR-108-S 587 39 17.6 SBPR-120-S

list 118 153 186 204 254

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

• One-piece flat 3⁄16˝ (5mm)-thick solid bar. • 2˝ (51mm)-wide. • Includes one two-prong pot hook per foot. FEATURES:

list 505 532 546 563 580 595 655 718 783

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Additional Pot Hook for Single Bar Pot Racks single bar pot rack

• Stainless steel.

pot hook

Wire Wall Shelf Kits

weight cu lbs. kg ft model # 0.2 0.1 0.1 300696

list ea. 24

Freight class is 70.0.

see spec sheet • One wire shelf. • Two stationary wire wall mounts.

list 106 141 175 189 243

EAGLEgard® model # SNSW1224E SNSW1236E SNSW1248E SNSW1260E SNSW1272E

• Front of shelf is flat and features “tape-on” ticket rails, which are supplied with tape and are to be attached in the field. • Floating ball mechanism holds checks in place. • Heavy gauge type 430 construction.

list 186 203 232 259 328 360 445 572

Single Bar Pot Racks length weight in. mm lbs. kg model # 24˝ 610 5 2.3 SBPR-24-A 36˝ 915 6 2.7 SBPR-36-A 48˝ 1219 7 3.2 SBPR-48-A 81⁄2˝ 60˝ 1524 9 4.1 SBPR-60-A width 72˝ 1829 11 5.0 SBPR-72-A (216mm) 84˝ 2134 13 5.9 SBPR-84-A 96˝ 2438 15 6.8 SBPR-96-A 108˝ 2743 17 7.7 SBPR-108-A 120˝ 3048 20 9.0 SBPR-120-A

Valu-Gard® model # SNSW1224VG SNSW1236VG SNSW1248VG SNSW1260VG SNSW1272VG

EG02.04

length weight chrome in. mm lb. kg model # 5.4 GWB1436C 14˝ width 36˝ 914 12 (356mm) 48˝ 1219 14 6.4 GWB1448C 6.4 GWB1836C 18˝ width 36˝ 914 14 (457mm) 48˝ 1219 17 7.7 GWB1848C

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

(•) MTS (made to stock) / ( ) MTO (made to order)

list 104 116 111 123

VALU-MASTER® model # list GWB1436V 106 GWB1448V 119 GWB1836V 119 GWB1848V 135

Valu-Gard® model # GWB1436VG GWB1448VG GWB1836VG GWB1848VG

list 106 119 119 135

97


WALL SHELVES Catalog Section 2

Wall Mounted Shelves see spec sheet

EG02.05

FEATURES:

• 11⁄2˝ (38mm) roll on front. • 11⁄2˝ (38mm) upturn on rear and ends. Note: 15˝ and 18˝ (381 and 457mm) wide shelves available. To order, replace “12” in model number with a “15” or “18” indicating desired shelf width (example: WS154816/3). For 15˝ (381mm) wide shelves, add 15% to list price of 12˝ (305mm) wide models. For 18˝ wide shelves, add 30% to list price of 12˝ (305mm) shelves.

Die-formed stainless steel mounting brackets are stud-welded to shelf.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

10˝ width (254mm)

12˝ width (305mm)

length in. mm

weight lbs. kg

24˝ 36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝ 24˝ 36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝

10 12 15 20 22 24 29 32 34 12 14 17 23 25 28 31 36 39

610 915 1219 1524 1829 2133 2438 2743 3048 610 915 1219 1524 1829 2133 2438 2743 3048

4.5 5.4 6.8 9.0 10.0 10.9 13.2 14.5 15.4 5.4 6.4 7.7 10.4 11.3 12.7 14.1 16.3 17.6

cubic feet 0.5 0.7 0.9 1.2 1.4 1.7 1.9 2.1 2.3 0.6 0.9 1.1 1.4 1.7 2.0 2.2 2.5 2.8

16 gauge, type model # WS1024-16/4 WS1036-16/4 • WS1048-16/4 • WS1060-16/4 • WS1072-16/4 • WS1084-16/4 WS1096-16/4 WS10108-16/4 WS10120-16/4 WS1224-16/4 • WS1236-16/4 • WS1248-16/4 • WS1260-16/4 • WS1272-16/4 • WS1284-16/4 • WS1296-16/4 • WS12108-16/4 WS12120-16/4

430 list 419 451 455 487 519 546 633 689 722 451 484 496 528 564 598 700 765 798

Piggyback Wall Mounted Shelf Kits see product announcement

EG8132

FEATURES:

16 gauge, type model # WS1024-16/3 WS1036-16/3 WS1048-16/3 WS1060-16/3 WS1072-16/3 WS1084-16/3 WS1096-16/3 WS10108-16/3 WS10120-16/3 WS1224-16/3 • WS1236-16/3 • WS1248-16/3 • WS1260-16/3 • WS1272-16/3 • WS1284-16/3 • WS1296-16/3 • WS12108-16/3 WS12120-16/3

304 list 491 555 591 653 713 773 892 978 1104 525 589 631 696 761 826 904 1060 1120

14 gauge, type model # WS1024-14/3 WS1036-14/3 WS1048-14/3 WS1060-14/3 WS1072-14/3 WS1084-14/3 WS1096-14/3 WS10108-14/3 WS10120-14/3 WS1224-14/3 WS1236-14/3 WS1248-14/3 WS1260-14/3 WS1272-14/3 • WS1284-14/3 WS1296-14/3 WS12108-14/3 WS12120-14/3

304 list 541 611 647 716 782 847 981 1077 1214 578 646 695 764 835 909 993 1163 1233

• Brackets can be mounted to studs – no wall backing required. • Freedom to move the shelves left or right. • Wire design allows for air circulation. • 18˝ (457mm) width. • No tools required to attach shelf to wall brackets. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Three-Tier Units shelf length x width in. mm 18˝ 18˝ 18˝ 18˝ 18˝

x x x x x

24˝ 30˝ 36˝ 48˝ 60

457 x 610 457 x 762 457 x 914 457 x 1219 457 x 1524

bracket height in. mm 237⁄8˝ 606 237⁄8˝ 606 237⁄8˝ 606 237⁄8˝ 606 237⁄8˝ 606

Units with One Shelf model # list S1-3B-SSW1824C 104 S1-3B-SSW1830C 117 S1-3B-SSW1836C 124 S1-3B-SSW1848C 143 S1-3B-SSW1860C 167

Units with Two Shelves model # list S2-3B-SSW1824C 159 S2-3B-SSW1830C 183 S2-3B-SSW1836C 197 S2-3B-SSW1848C 236 S2-3B-SSW1860C 284

Units with Three Shelves model # list S3-3B-SSW1824C 213 S3-3B-SSW1830C 248 S3-3B-SSW1836C 271 S3-3B-SSW1848C 328 S3-3B-SSW1860C 401

bracket height in. mm 337⁄8˝ 860 337⁄8˝ 860 337⁄8˝ 860 337⁄8˝ 860 337⁄8˝ 860

Units with Three Shelves model # list S3-5B-SSW1824C 232 S3-5B-SSW1830C 267 S3-5B-SSW1836C 289 S3-5B-SSW1848C 346 S3-5B-SSW1860C 419

Units with Four Shelves model # list S4-5B-SSW1824C 285 S4-5B-SSW1830C 334 S4-5B-SSW1836C 362 S4-5B-SSW1848C 439 S4-5B-SSW1860C 536

Units with Five Shelves model # list S5-5B-SSW1824C 339 S5-5B-SSW1830C 400 S5-5B-SSW1836C 436 S5-5B-SSW1848C 532 S5-5B-SSW1860C 653

Five-Tier Units shelf length x width in. mm 18˝ 18˝ 18˝ 18˝ 18˝

98

x x x x x

24˝ 30˝ 36˝ 48˝ 60˝

457 x 610 457 x 762 457 x 914 457 x 1219 457 x 1524

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


WALL SHELVES Catalog Section 2

Shelves with Removable Hooks see spec sheet

• 16 gauge type 430 shelf with type 304 stainless steel pot rack. • 11⁄2˝ (38mm) roll on front. • 11⁄2˝ (38mm) upturn on rear and ends • Fitted with one two-prong pot hook per foot.

EG02.06

FEATURES:

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

10˝ (254mm) Wide Shelves length in. mm 36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝ 132˝ 144˝

pot hook

Additional Pot Hook for Shelves with Removable Hooks

cu ft

12 23 37 51 65 79 93 107 121 135

1.0 1.3 1.6 1.9 2.2 2.5 2.8 3.1 3.4 3.7

5.4 10.4 16.8 23.1 29.5 35.8 42.2 48.5 54.9 61.2

model # WSP1036 WSP1048 WSP1060 WSP1072 WSP1084 WSP1096 WSP10108 WSP10120 WSP10132 WSP10144

list 762 779 813 841 882 943 1238 1266 1341 1371

weight lbs. kg

cu ft

15 29 43 57 71 85 99 113 127 141

1.1 1.5 1.8 2.2 2.6 2.9 3.3 3.6 4.0 4.4

15˝ (381mm) Wide Shelves

• Stainless steel. weight cu lbs. kg ft model # 0.2 0.1 0.1 300696

914 1219 1524 1829 2134 2438 2743 3048 3353 3658

weight lbs. kg

12˝ (305mm) Wide Shelves

list ea. 24

length in. mm 36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝ 132˝ 144˝

914 1219 1524 1829 2134 2438 2743 3048 3353 3658

weight lbs. kg

cu ft

21 35 49 63 77 91 105 119 133 147

1.3 1.8 2.3 2.7 3.2 3.6 4.0 4.5 4.9 5.4

9.5 15.9 22.2 28.6 34.9 41.3 47.6 54.0 60.3 66.7

model # WSP1536 WSP1548 WSP1560 WSP1572 WSP1584 WSP1596 WSP15108 WSP15120 WSP15132 WSP15144

model # WSP1236 WSP1248 • WSP1260 • WSP1272 • WSP1284 WSP1296 WSP12108 WSP12120 WSP12132 WSP12144

list 791 820 857 891 942 962 1315 1345 1415 1441

18˝ (457mm) Wide Shelves list 1034 1055 1202 1303 1493 1564 1698 1726 1854 1886

Wall Cabinets see spec sheet

6.8 13.2 19.5 25.9 32.2 38.6 44.9 51.3 57.6 64.0

EG02.07

FEATURES:

weight lbs. kg

cu ft

27 41 55 69 83 97 111 125 139 153

1.6 2.2 2.7 3.2 3.7 4.3 4.8 5.3 5.9 6.4

12.2 18.6 24.9 31.3 37.6 44.0 50.3 56.7 63.1 69.4

model # WSP1836 WSP1848 WSP1860 WSP1872 WSP1884 WSP1896 WSP18108 WSP18120 WSP18132 WSP18144

list 1238 1258 1324 1417 1537 1628 1979 2009 2047 2079

• Heavy gauge stainless steel. • Back is recessed with full-length concealed mounting plate for easy installation. • Fixed center shelf. • Hinged doors provided with lift-off pin hinges. • 15˝ (381mm) width. 28˝ (711mm) overall height. Freight class is 100.0. (•) MTS (made to stock) / ( ) MTO (made to order)

wall cabinet with hinged doors

Open Front length in. mm

wall cabinet with sliding doors

weight cubic lbs. kg feet model # 125 56.7 14.5 WCO-36 165 74.8 18.3 WCO-48 195 88.5 22.6 WCO-60 225 102.0 26.8 WCO-72 260 117.9 35.2 WCO-96

36˝ 914 48˝ 1219 60˝ 1524 72˝ 1829 96˝ 2438 * Features two pairs of doors.

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

Hinged Doors

list model # 3151 WCH-36 3629 WCH-48 3971 WCH-60 4446 WCH-72 4979 WCH-96 *

list 4642 5029 5767 6460 7237

Sliding Doors model # WCS-36 WCS-48 WCS-60 WCS-72 WCS-96 *

list 4312 4724 5463 6118 6852

99


WALL SHELVES Catalog Section 2 • 16 gauge type 304 stainless steel construction. • Rolled edge on front and back, with ends turned down 90˚. • With self-drilling top screws. • Heavy gauge support channel and wall brackets.

Pass-Thru Shelves see spec sheet

EG02.08

FEATURES: Freight class is 70.0.

Promotes “pass-thru” from kitchen to serving area! length in. mm

18˝ width (457mm)

24˝ 36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝ 132˝ 144˝

610 915 1219 1524 1829 2134 2438 2743 3048 3353 3658

model # PTS-1824 PTS-1836 PTS-1848 PTS-1860 PTS-1872 PTS-1884 PTS-1896 PTS-18108 PTS-18120 PTS-18132 PTS-18144

list 491 596 1074 1158 1197 1239 1284 1336 1362 1486 1694

length in. mm

24˝ width (610mm)

24˝ 36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝ 132˝ 144˝

(•) MTS (made to stock) / ( ) MTO (made to order)

model # PTS-2424 PTS-2436 PTS-2448 PTS-2460 PTS-2472 PTS-2484 PTS-2496 PTS-24108 PTS-24120 PTS-24132 PTS-24144

610 915 1219 1524 1829 2134 2438 2743 3048 3353 3658

Tab Lock Shelves see spec sheet

EG02.09

FEATURES:

• • • • • • •

list 534 735 1342 1445 1547 1694 1812 1821 1844 2016 2161

16 gauge, type 430 stainless steel. 11⁄2˝ (38mm) roll on front. 11⁄2˝ (38mm) upturn on rear and ends. Tab lock for easy assembly. Die-formed stainless steel mounting brackets. Not available in other widths. 60˝ length max. Freight class is 70.0.

length in. mm

10˝ width (254mm)

12˝ width (305mm)

24˝ 36˝ 48˝ 60˝ 24˝ 36˝ 48˝ 60˝

610 915 1219 1524 610 915 1219 1524

weight cubic lbs. kg feet model # 10 4.5 0.6 WS1024TL • 12 5.4 0.9 WS1036TL • 15 6.8 1.3 WS1048TL • 20 9.0 1.6 WS1060TL • 12 5.4 0.6 WS1224TL • 14 6.4 0.9 WS1236TL • 17 7.7 1.3 WS1248TL • 23 10.4 1.6 WS1260TL •

(•) MTS (made to stock) / ( ) MTO (made to order)

list 183 195 223 252 196 208 241 269

Wall Mounted Microwave Shelves see spec sheet

width in. mm 18˝ 24˝

100

457 610

EG02.10

weight cubic lbs. kg feet model # 17 7.7 4.8 MWS1824 • 23 10.4 4.8 MWS2424 •

FEATURES: • 24˝ (610mm) length. • Made of highly polished heavy gauge type 430 stainless steel. • Marine counter edge in front that prevents microwave from sliding off. • Hole with grommet at center rear for wiring. list 447 509

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


WALL SHELVES Catalog Section 2

Adjustable Post Wire Wall Mounts Sold as Prepackaged Units see spec sheet

END UNITS. • Two posts, single shelf brackets, post supports. • Number of shelf brackets depends on the height of the posts. - 14˝ (356mm) posts; one row of brackets. - 33˝ (838mm) posts; two rows of brackets …and so on.

EG02.11

end units (includes both left and right assemblies)

mid unit

FEATURES:

Adjustable post wall mounts are sold as prepackaged end and mid units, or sold as components (see page 102). The prepackaged units contain all needed components except shelves and wall bolts. Wall bolts must be selected according to wall type. Note:

ORDERING:

MID UNITS • One post, double shelf brackets, post supports. • Number of shelf brackets corresponds to post height the same as end units. • One shelf long, order only one end unit. • Two shelves long, order one end and one mid unit. • Three shelves long, order one end and two mid units …and so on. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Shelves (page 7) and accessories (pages 48-55) are sold separately.

Prepackaged Mid Units

Prepackaged End Units

14˝ width (356mm)

18˝ width (457mm)

21˝ width (533mm)

24˝ width (610mm)

post chrome height # of cu weight* in. mm shelves ft lbs. kg model # list 14˝ 356 1 0.6 7 3.2 PWE14-1C 169 33˝ 838 2 0.7 14 6.4 PWE14-2C 274 54˝ 1372 3 0.7 22 10.0 PWE14-3C 379 63˝ 1600 4 0.7 28 13.0 PWE14-4C 458 14˝ 356 1 0.6 8 3.6 PWE18-1C 171 33˝ 838 2 0.6 15 6.8 PWE18-2C 274 54˝ 1372 3 0.7 23 10.0 PWE18-3C 381 63˝ 1600 4 0.7 29 13.0 PWE18-4C 460 14˝ 356 1 0.7 9 4.1 PWE21-1C 174 33˝ 838 2 0.8 16 7.3 PWE21-2C 282 54˝ 1372 3 0.9 25 11.0 PWE21-3C 394 63˝ 1600 4 0.9 32 15.0 PWE21-4C 478 14˝ 356 1 0.7 10 4.5 PWE24-1C 174 33˝ 838 2 0.8 17 7.7 PWE24-2C 285 54˝ 1372 3 0.9 26 12.0 PWE24-3C 399 63˝ 1600 4 0.9 34 16.0 PWE24-4C 483

Valu-Gard model # PWE14-1VG PWE14-2VG PWE14-3VG PWE14-4VG PWE18-1VG PWE18-2VG PWE18-3VG PWE18-4VG PWE21-1VG PWE21-2VG PWE21-3VG PWE21-4VG PWE24-1VG PWE24-2VG PWE24-3VG PWE24-4VG

®

list 169 274 379 458 171 274 381 460 174 282 394 478 174 285 399 483

stainless steel model # PWE14-1S PWE14-2S PWE14-3S PWE14-4S PWE18-1S PWE18-2S PWE18-3S PWE18-4S PWE21-1S PWE21-2S PWE21-3S PWE21-4S PWE24-1S PWE24-2S PWE24-3S PWE24-4S

list 472 838 1077 1320 488 874 1127 1389 491 880 1135 1389 501 898 1161 1435

chrome model # PWM14-1C PWM14-2C PWM14-3C PWM14-4C PWM18-1C PWM18-2C PWM18-3C PWM18-4C PWM21-1C PWM21-2C PWM21-3C PWM21-4C PWM24-1C PWM24-2C PWM24-3C PWM24-4C

list 109 185 261 323 111 186 265 326 114 197 276 345 115 197 279 347

Valu-Gard® model # PWM14-1VG PWM14-2VG PWM14-3VG PWM14-4VG PWM18-1VG PWM18-2VG PWM18-3VG PWM18-4VG PWM21-1VG PWM21-2VG PWM21-3VG PWM21-4VG PWM24-1VG PWM24-2VG PWM24-3VG PWM24-4VG

list 109 185 261 323 111 186 265 326 114 197 276 345 115 197 279 347

stainless steel model # PWM14-1S PWM14-2S PWM14-3S PWM14-4S PWM18-1S PWM18-2S PWM18-3S PWM18-4S PWM21-1S PWM21-2S PWM21-3S PWM21-4S PWM24-1S PWM24-2S PWM24-3S PWM24-4S

list 304 551 734 921 314 574 760 951 319 580 772 886 318 582 782 986

* For stainless steel units, add 1 lb. (0.5 kg) weight.

The EAGLE Advantage

HAVE YOU PROFITED TODAY? Call Your EAGLE GROUP Representative Now To Place Your Order. 100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

101


WALL SHELVES Catalog Section 2

Adjustable Post Wire Wall Mounts Sold as Components see spec sheet

EG02.11

FEATURES:

• Designed to allow inter-mixing of shelf widths or customizing of units to fit specification needs. • All components priced individually. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

end brackets

center support

post

mid brackets

brackets used in conjunction with posts and center supports

End Brackets

Posts

length weight cu in. mm lbs. kg ft 14˝ 18˝ 21˝ 24˝

356 457 533 610

Note:

3 4 5 6

1.4 1.8 2.3 2.7

0.5 0.6 1.0 1.0

chrome model # list PWB14C • 41 PWB18C • 42 PWB21C • 43 PWB24C • 45

®

Valu-Gard model # list PWB14VG • 41 PWB18VG • 42 PWB21VG 43 PWB24VG 45

stainless steel model # list PWB14S • 132 PWB18S 135 PWB21S 143 PWB24S • 146

Valu-Gard® stainless steel model # list model # list PW14VG• 47 PW14S 135 PW33VG• 60 PW33S 215 PW54VG 75 PW54S 219 PW63VG 77 PW63S 224

Must be used with posts to mount to the wall.

Mid Brackets

Center Support for Posts

length weight cu chrome in. mm lbs. kg ft model # list 14˝ 356 6 2.7 0.5 PDWB14C • 64 18˝ 457 8 3.6 0.6 PDWB18C • 66 21˝ 533 10 4.5 1.0 PDWB21C • 69 24˝ 610 12 5.4 1.0 PDWB24C 71 Note:

height weight cu chrome in. mm lbs. kg ft model # list 14˝ 356 2 0.9 0.1 PW14C • 47 33˝ 838 3 1.4 0.1 PW33C • 60 54˝ 1372 5 2.3 0.1 PW54C • 75 63˝ 1524 6 2.7 0.2 PW63C 77

®

Valu-Gard model # list PDWB14VG • 64 PDWB18VG 66 PDWB21VG 69 PDWB24VG 71

stainless steel model # list PDWB14S 201 PDWB18S 208 PDWB21S 215 PDWB24S 219

weight lbs. kg

cu chrome ft model # list 0.5 A203059 11

Valu-Gard® model # list A218017 11

1

0.5

Note:

Must be used in conjunction with post.

stainless steel model # list A207016 40

Must be used with posts to mount to the wall.

Stationary Wire Wall Mounts see spec sheet

• One single shelf support and mounting plate. EG02.12

END UNIT: • One double shelf support and mounting plate. MID UNIT:

Designed for fixed application where vertical adjustment is not required. stationary wall mount with shelf support and mounting plate

Note:

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Shelves (page 7) sold separately.

End Units* length in. mm

cu ft

weight** chrome lbs. kg model # list 6 2.7 WB14-C • 41 8 3.6 WB18-C • 42 10 4.5 WB21-C • 42 12 5.5 WB24-C • 43

Mid Units ®

Valu-Gard model # list WB14-VG • 41 WB18-VG • 42 WB21-VG 42 WB24-VG 43

stainless** model # list WB14-S • 98 WB18-S • 102 WB21-S 105 WB24-S • 109

14˝ 356 0.5 18˝ 457 0.5 21˝ 533 0.7 24˝ 610 0.7 *End Units priced per piece; **For stainless steel units, add 1 lb. (0.5 kg) weight.

102

weight** chrome lbs. kg model # 8 3.6 DWB14-C • 10 4.5 DWB18-C • 12 5.5 DWB21-C 14 6.4 DWB24-C •

list 61 63 63 64

Valu-Gard® model # list DWB14-VG 61 DWB18-VG 63 DWB21-VG 63 DWB24-VG 64

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

stainless** model # list DWB14-S 146 DWB18-S 156 DWB21-S 159 DWB24-S 166


Tables SPEC-MASTER®

Accessories/Components Casters ............................118-119, 129 More Accessories and Components ................118, 120, 134-139

Custom Options ..................146 Drawers ....................140-143 Hardwood Worktables ..........119 Overshelves / Table Mounted Flex-Master® Adjustable............135-136 Microwave ......................................139 Non-Adjustable / All-Welded............138

Worktables w/Stainless Steel Top

Enclosed Worktables with Backsplash ..........................123 with Flat Top ................................121 with Upturn ................................122

Specialty Tables adjusTable® Work Surface Systems ....128 Beverage Counter ............................124 Demo Tables ....................................130 Folding Tables..................................127 Pizza Cut-n-Pack..............................126 Pizza Holding ..................................126 Plate Cabinets ..................................125 Prep Tables ..............................124-125 Rice Cooker ....................................127

Poly Top Tables / Boat Racks..................132-134

Griddle / Equipment ........................131 Mixer................................................129 Mobile Equipment............................130 Mobile Mixer....................................130

Pot/Pan Racks..............144-145

Wall Cabinets....................137

NEW

Wall Mounted Stainless Steel Tables EG8107

standard box marine counter edge

Consult factory for pricing.

with Backsplash and Undershelf Base ....................114-115 with Flat Top and Tubular Base ........................108-109 with Flat Top and Undershelf Base ....................106-107 with Upturn and Tubular Base ........................112-113 with Upturn and Undershelf Base ....................110-111 Filler Tables......................................120

Stands

see product announcement

with Backsplash and Tubular Base ........................116-117

Facilitates small rolling cabinets which can be moved in and out.

FEATURES:

Knock Down Worktables with Cabinet Kit ............................120

For Wall Shelves, see pages 93–102.

• Tabletop available in 16- or 14-gauge, 304 or 316 series stainless steel. • 14-gauge brackets with hole for electrical wire run. • Wall mounted for environments with frequent wash downs. • Available in same configuration as a standard worktable (pages 106-117). • 200 lb. weight capacity. • Options available include integral sink bowls, drawers, end splashes, and latex sound deadening. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

To build a model number… Choose the designated letters and numbers from left to right. Example: #WT3048-14/304-SEM-BS indicates a table with backsplash (prefix WT, suffix -SEM-BS), with 30˝ x 48˝ (3048) 14-gauge (-14/) type 304 (304) stainless steel tabletop.

type of tabletop (prefix) with flat top = WT or with 11⁄2˝ upturn = UWT or with 41⁄2˝ backsplash = WT

width x length of tabletop 30˝ x 48˝ = 3048 or 30˝ x 60˝ = 3060 or 30˝ x 72˝ = 3072

14- or 16-gauge stainless steel tabletop 14 gauge = -14/ or 16 gauge = -16/

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

304 or 316 series stainless steel tabletop 304 series = 304 or 316 series = 316

type of tabletop (suffix) with flat top = -SEM or with 11⁄2˝ upturn = -SEM or with 41⁄2˝ backsplash = -SEM-BS

103


SPEC-MASTER® Marine Series 14 gauge, type 304 stainless steel tabletop. Features a marine counter edge to prevent spillage.

typical marine counter edge construction

WITH FLAT TOP AND UNDERSHELF…

WITH FLAT TOP AND TUBULAR BASE…

See pages 106-107

See pages 108-109

WITH 41⁄2˝ (267MM) BACKSPLASH AND UNDERSHELF…

WITH 41⁄2˝ (267MM) BACKSPLASH AND TUBULAR BASE...

See pages 114-115

See pages 116-117

EM, SEM, GTEM, and STEM series

SPEC-MASTER® Series 14 gauge, type 304 stainless steel tabletop.

typical rolled edge construction

WITH FLAT TOP AND UNDERSHELF…

WITH UPTURN AND UNDERSHELF…

WITH BACKSPLASH AND UNDERSHELF…

See pages 106-107

See pages 110-111

See pages 114-115

WITH FLAT TOP AND TUBULAR BASE…

WITH UPTURN AND TUBULAR BASE…

WITH BACKSPLASH AND TUBULAR BASE...

See pages 108-109

See pages 112-113

See pages 116-117

E, SE, GTE, and STE series


Deluxe Series 16 gauge, type 304 stainless steel table top.

typical rolled edge construction

WITH FLAT TOP AND UNDERSHELF…

WITH UPTURN AND UNDERSHELF…

WITH BACKSPLASH AND UNDERSHELF…

See pages 106-107

See pages 110-111

See pages 114-115

WITH FLAT TOP AND TUBULAR BASE…

WITH UPTURN AND TUBULAR BASE…

WITH BACKSPLASH AND TUBULAR BASE...

See pages 108-109

See pages 112-113

See pages 116-117

EB, SEB, GTEB, and STEB series

Budget Series 16 gauge, type 430 stainless steel table top.

typical rolled edge construction

WITH FLAT TOP AND UNDERSHELF…

WITH UPTURN AND UNDERSHELF…

WITH BACKSPLASH AND UNDERSHELF…

See pages 106-107

See pages 110-111

See pages 114-115

WITH FLAT TOP AND TUBULAR BASE…

WITH UPTURN AND TUBULAR BASE…

WITH BACKSPLASH AND TUBULAR BASE...

See pages 108-109

See pages 112-113

See pages 116-117

B, SB, GTB, and STB series


TABLES Catalog Section 10

Worktables with Stainless Steel Flat Top & Galvanized Legs/Undershelf see spec sheets EG10.40A EG10.40B

• 15⁄8˝ (41mm)-diameter legs and adjustable undershelf are heavy gauge galvanized steel. • Heavy gauge polished stainless steel top. EG10.40C EG10.40D • Offers worktables with a rolled edge on front and rear, with ends turned 90o, except SPEC-MASTER® Marine edge. 1 1 FEATURES: • 35 ⁄8˝ - 36 ⁄8˝ (892 - 918mm) adjustable working height. Note: All shipping weights and cubic feet are approximate. NSF sprayed-on latex sound deadening available. To order, add $596 to list price and suffix “-SD”. Example: T2424B-SD.

adjustable undershelf welded gusset

(Patent #5,165,349)

Optional fixed undershelf available in place of standard adjustable undershelf. To order, add 10% to list price, and “-F” to end of suffix. Example: T2424B-F.

now STANDARD! See page 118 for optional casters available.

For FLEX-MASTER® overshelf kits, see page 137. For drawer kits, see page 143.

length in.

# of weight mm legs lbs. kg

Freight class is 70.0.

cu ft

BUDGET 16/430 top model # list T2424B • 635 T2430B • 689 T2436B • 748 T2448B • 762 T2460B • 804 T2472B • 860 T2484B 1097 T2496B • 1248 T24108B 2031 T24120B 2089 T24132B 2100 T24144B 2102 T3030B • 708 T3036B • 764 T3048B • 776 T3060B • 849 T3072B • 922 T3084B • 1151 T3096B • 1333 T30108B 2051 T30120B 2119 T30132B 2225 T30144B 2292 T3648B 967 T3660B 1089 T3672B 1191 T3684B 1638 T3696B 1741 T36108B 2475 T36120B 2532 T36132B 2595 T36144B 2737 n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a

(•) MTS (made to stock) / ( ) MTO (made to order)

DELUXE 16/304 top model # list T2424EB 700 T2430EB 763 T2436EB 821 T2448EB 835 T2460EB 905 T2472EB 981 T2484EB 1403 T2496EB 1503 T24108EB 2171 T24120EB 2233 T24132EB 2274 T24144EB 2341 T3030EB 791 T3036EB 849 T3048EB • 874 T3060EB • 961 T3072EB • 1053 T3084EB 1424 T3096EB 1553 T30108EB 2300 T30120EB 2368 T30132EB 2498 T30144EB 2516 T3648EB 1064 T3660EB 1193 T3672EB 1295 T3684EB 1759 T3696EB 1864 T36108EB 2761 T36120EB 2827 T36132EB 2921 T36144EB 2984 n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a

*SPEC-MASTER® 14/304 top model # list T2424E 735 T2430E 814 T2436E 872 T2448E 887 T2460E 972 T2472E 1053 T2484E 1435 T2496E 1540 T24108E 2126 T24120E 2341 T24132E 2464 T24144E 2473 T3030E 841 T3036E 898 T3048E 934 T3060E 1029 T3072E 1127 T3084E 1514 T3096E 1654 T30108E 2421 T30120E 2486 T30132E 2568 T30144E 2709 T3648E 1096 T3660E 1228 T3672E 1339 T3684E 1793 T3696E 1917 T36108E 2827 T36120E 2893 T36132E 3021 T36144E 3177 T4848E 2556 T4860E 2858 T4872E 3103 T4884E 4213 T4896E 4455 T48108E 6666 T48120E 6742 T48132E 7324 T48144E 7377

* t Marine 14/304 top model # list T2424EM 1228 T2430EM 1316 T2436EM 1374 T2448EM 1396 T2460EM 1477 T2472EM 1568 T2484EM 1914 T2496EM 2023 T24108EM 2656 T24120EM 2718 T24132EM 2916 T24144EM 2978 T3030EM 1345 T3036EM 1407 T3048EM 1444 T3060EM 1548 T3072EM 1651 T3084EM 1998 T3096EM 2137 T30108EM 2858 T30120EM 2921 T30132EM 3092 T30144EM 3158 T3648EM 1736 T3660EM 1871 T3672EM 1993 T3684EM 2404 T3696EM 2519 T36108EM 3302 T36120EM 3367 T36132EM 3566 T36144EM 3635 T4848EM 3407 T4860EM 3708 T4872EM 3956 T4884EM 5061 T4896EM 5307 T48108EM 7522 T48120EM 7583 T48132EM 8167 T48144EM 8233

24˝ 610 4 40 18.1 3.5 30˝ 762 4 45 20.4 3.8 36˝ 914 4 50 22.7 4.4 48˝ 1219 4 60 27.2 5.7 1524 4 70 31.8 7.1 24˝ 60˝ 72˝ 1829 4 80 36.3 8.5 width 84˝ 2134 4 90 40.8 11.2 (610mm) 96˝ 2438 6 100 45.4 11.2 108˝ 2743 6 110 49.9 14.0 120˝ 3048 6 120 54.4 14.0 132˝ 3353 8 130 59.0 16.8 144˝ 3658 8 140 63.5 16.8 30˝ 762 4 46 20.9 3.8 36˝ 914 4 52 23.6 4.4 48˝ 1219 4 64 29.0 5.7 60˝ 1524 4 76 34.5 7.1 30˝ 72˝ 1829 4 84 38.1 8.5 2134 4 96 43.6 11.2 width 84˝ 2438 6 108 49.0 11.2 (762mm) 96˝ 108˝ 2743 6 120 54.4 14.0 120˝ 3048 6 132 59.9 14.0 132˝ 3353 8 144 65.3 16.8 144˝ 3658 8 156 70.8 16.8 48˝ 1219 4 70 31.8 7.0 60˝ 1524 4 82 37.2 8.8 72˝ 1829 4 96 43.6 10.5 36˝ 84˝ 2134 4 108 49.0 12.2 2438 6 120 54.4 13.9 width 96˝ 2743 6 132 59.9 17.3 (914mm) 108˝ 120˝ 3048 6 144 65.3 17.3 132˝ 3353 8 156 70.8 20.7 144˝ 3658 8 168 76.2 20.7 48˝ 1219 4 124 56.2 9.3 60˝ 1524 4 146 66.2 14.0 72˝ 1829 6 171 77.6 14.0 48˝ 84˝ 2134 8 197 89.4 18.7 2438 8 241 109.3 18.7 width 96˝ (1219mm) 108˝ 2743 8 278 126.1 23.3 120˝ 3048 8 316 143.3 23.3 132˝ 3353 10 353 160.1 27.9 144˝ 3658 10 391 177.4 27.9 * On SPEC-MASTER® and SPEC-MASTER® Marine tables, increase stated weight by 10%. t SPEC-MASTER® Marine tables feature a marine counter edge to prevent spillage.

106

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


TABLES Catalog Section 10

Worktables with Stainless Steel Flat Top & Stainless Steel Legs/Undershelf see spec sheets EG10.41A EG10.41B

• 15⁄8˝ (41mm)-diameter legs and adjustable undershelf are heavy gauge stainless steel. • Heavy gauge polished stainless steel top. • Offers worktables with a rolled edge on front and rear, EG10.41C EG10.41D with ends turned 90o, except SPEC-MASTER® Marine. 1 1 FEATURES: • 35 ⁄8˝ - 36 ⁄8˝ (892 - 918mm) adjustable working height. Note: All shipping weights and cubic feet are approximate. NSF sprayed-on latex sound deadening available. To order, add $596 to list price and suffix “-SD”. Example: T2424SB-SD. For FLEX-MASTER® overshelf kits, see page 137. (Patent #5,165,349)

For drawer kits, see page 143.

Freight class is 70.0. See page 118 for optional casters available.

in.

length mm

# of legs

weight lbs. kg

cu ft

BUDGET 16/430 top model # list T2424SB 892 T2430SB 972 T2436SB • 1027 T2448SB 1056 T2460SB 1141 T2472SB 1224 T2484SB 1512 T2496SB 1623 T24108SB 2635 T24120SB 2697 T24132SB 2756 T24144SB 2901 T3030SB • 1012 T3036SB • 1082 T3048SB • 1125 T3060SB • 1231 T3072SB • 1334 T3084SB 1567 T3096SB • 1757 T30108SB 2795 T30120SB 2859 T30132SB 3037 T30144SB 3101 T3648SB 1298 T3660SB 1437 T3672SB 1571 T3684SB 2172 T3696SB 2342 T36108SB 3326 T36120SB 3393 T36132SB 3511 T36144SB 3676 n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a

(•) MTS (made to stock) / ( ) MTO (made to order)

DELUXE *SPEC-MASTER® * t Marine 16/304 top 14/304 top 14/304 top model # list model # list model # list T2424SEB • 952 T2424SE 1026 T2424SEM 1534 T2430SEB 1048 T2430SE 1139 T2430SEM 1645 T2436SEB • 1105 T2436SE 1197 T2436SEM 1702 T2448SEB • 1145 T2448SE • 1248 T2448SEM 1756 T2460SEB 1245 T2460SE 1360 T2460SEM 1868 T2472SEB 1344 T2472SE 1474 T2472SEM 1983 T2484SEB 1849 T2484SE 2017 T2484SEM 2445 T2496SEB 1979 T2496SE 2161 T2496SEM 2587 T24108SEB 2747 T24108SE 3093 T24108SEM 3342 T24120SEB 2917 T24120SE 3156 T24120SEM 3406 T24132SEB 3000 T24132SE 3261 T24132SEM 3672 T24144SEB 3061 T24144SE 3421 T24144SEM 3736 T3030SEB • 1114 T3030SE 1207 T3030SEM 1714 T3036SEB • 1169 T3036SE 1268 T3036SEM 1773 T3048SEB • 1228 T3048SE • 1343 T3048SEM 1845 T3060SEB • 1354 T3060SE • 1477 T3060SEM 1984 T3072SEB • 1474 T3072SE • 1618 T3072SEM 2192 T3084SEB 1931 T3084SE • 2105 T3084SEM 2532 T3096SEB • 2136 T3096SE • 2332 T3096SEM 2634 T30108SEB 3051 T30108SE 3305 T30108SEM 3615 T30120SEB 3117 T30120SE 3372 T30120SEM 3679 T30132SEB 3331 T30132SE 3618 T30132SEM 3922 T30144SEB 3399 T30144SE 3684 T30144SEM 3988 T3648SEB 1448 T3648SE 1534 T3648SEM 2154 T3660SEB 1589 T3660SE 1688 T3660SEM 2316 T3672SEB 1735 T3672SE 1844 T3672SEM 2483 T3684SEB 2358 T3684SE 2497 T3684SEM 3029 T3696SEB 2528 T3696SE 2684 T3696SEM 3216 T36108SEB 3624 T36108SE 3841 T36108SEM 4167 T36120SEB 3689 T36120SE 3907 T36120SEM 4228 T36132SEB 3845 T36132SE 4200 T36132SEM 4517 T36144SEB 4022 T36144SE 4264 T36144SEM 4584 n/a n/a T4848SE 2963 T4848SEM 3816 n/a n/a T4860SE 3278 T4860SEM 4134 n/a n/a T4872SE 3580 T4872SEM 4436 n/a n/a T4884SE 4840 T4884SEM 5693 n/a n/a T4896SE 5224 T4896SEM 6079 n/a n/a T48108SE 7618 T48108SEM 8476 n/a n/a T48120SE 7684 T48120SEM 8538 n/a n/a T48132SE 8262 T48132SEM 9114 n/a n/a T48144SE 8325 T48144SEM 9179

24˝ 610 4 40 18.1 3.5 30˝ 762 4 45 20.4 3.8 36˝ 914 4 50 22.7 4.4 48˝ 1219 4 60 27.2 5.7 60˝ 1524 4 70 31.8 7.1 24˝ 72˝ 1829 4 80 36.3 8.5 width 84˝ 2134 4 90 40.8 11.2 (610mm) 96˝ 2438 6 100 45.4 11.2 108˝ 2743 6 110 49.9 14.0 120˝ 3048 6 120 54.4 14.0 132˝ 3353 8 130 59.0 16.8 144˝ 3658 8 140 63.5 16.8 30˝ 762 4 46 20.9 3.8 36˝ 914 4 52 23.6 4.4 48˝ 1219 4 64 29.0 5.7 60˝ 1524 4 76 34.5 7.1 30˝ 72˝ 1829 4 84 38.1 8.5 2134 4 96 43.6 11.2 width 84˝ 2438 6 108 49.0 11.2 (762mm) 96˝ 108˝ 2743 6 120 54.4 14.0 120˝ 3048 6 132 59.9 14.0 132˝ 3353 8 144 65.3 16.8 144˝ 3658 8 156 70.8 16.8 48˝ 1219 4 70 31.8 7.0 60˝ 1524 4 82 37.2 8.8 72˝ 1829 4 96 43.6 10.5 36˝ 84˝ 2134 4 108 49.0 12.2 2438 6 120 54.4 13.9 width 96˝ 2743 6 132 59.9 17.3 (914mm) 108˝ 120˝ 3048 6 144 65.3 17.3 132˝ 3353 8 156 70.8 20.7 144˝ 3658 8 168 76.2 20.7 48˝ 1219 4 124 56.2 9.3 60˝ 1524 4 146 66.2 14.0 72˝ 1829 6 171 77.6 14.0 48˝ 84˝ 2134 8 197 89.4 18.7 2438 8 241 109.3 18.7 width 96˝ 2743 8 278 126.1 23.3 (1219mm) 108˝ 120˝ 3048 8 316 143.3 23.3 132˝ 3353 10 353 160.1 27.9 144˝ 3658 10 391 177.4 27.9 * SPEC-MASTER® and SPEC-MASTER® Marine tables feature all stainless steel construction. Increase stated weight by 10%. t SPEC-MASTER® Marine tables feature a marine counter edge to prevent spillage. 100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

107


TABLES Catalog Section 10

Worktables with Stainless Steel Flat Top & Galvanized Tubular Base see spec sheets EG10.42A EG10.42B EG10.42C EG10.42D

FEATURES:

• Tubular base. • 15⁄8˝ (41mm)-diameter legs and 11⁄4˝ (32mm)-diameter crossbracing are heavy gauge galvanized steel. • Heavy gauge polished stainless steel top. • Offers worktables with a rolled edge on front and rear, with ends turned 90o, except SPEC-MASTER® Marine. • 351⁄8˝ - 361⁄8˝ (892 - 918mm) adjustable working height. Note: All shipping weights and cubic feet are approximate. NSF sprayed-on latex sound deadening available. To order, add $596 to list price and suffix “-SD”. Example: T2424GTB-SD. For FLEX-MASTER® overshelf kits, see page 137. For drawer kits, see page 143.

corner connection (Patent #5,165,349)

length in. mm

# of legs

Freight class is 70.0.

See page 118 for optional casters available.

weight lbs. kg

cu ft

(•) MTS (made to stock) / ( ) MTO (made to order)

BUDGET 16/430 top model # list T2424GTB 742 T2430GTB 796 T2436GTB 854 T2448GTB 867 T2460GTB 911 T2472GTB 968 T2484GTB 1204 T2496GTB 1354 T24108GTB 2067 T24120GTB 2141 T24132GTB 2193 T24144GTB 2202 T3030GTB 816 T3036GTB 871 T3048GTB 885 T3060GTB 956 T3072GTB 1026 T3084GTB 1256 T3096GTB 1440 T30108GTB 2162 T30120GTB 2225 T30132GTB 2264 T30144GTB 2395 T3648GTB 1076 T3660GTB 1197 T3672GTB 1298 T3684GTB 1743 T3696GTB 1827 T36108GTB 2504 T36120GTB 2641 T36132GTB 2698 T36144GTB 2843 n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a

DELUXE 16/304 top model # list T2424GTEB 811 T2430GTEB 874 T2436GTEB 932 T2448GTEB 945 T2460GTEB 1015 T2472GTEB 1091 T2484GTEB 1514 T2496GTEB 1615 T24108GTEB 2275 T24120GTEB 2338 T24132GTEB 2385 T24144GTEB 2448 T3030GTEB 900 T3036GTEB 961 T3048GTEB • 982 T3060GTEB • 1071 T3072GTEB • 1160 T3084GTEB 1535 T3096GTEB 1661 T30108GTEB 2407 T30120GTEB 2474 T30132GTEB 2538 T30144GTEB 2681 T3648GTEB 1173 T3660GTEB 1301 T3672GTEB 1403 T3684GTEB 1868 T3696GTEB 1973 T36108GTEB 2789 T36120GTEB 2937 T36132GTEB 3027 T36144GTEB 3183 n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a

*SPEC-MASTER® 14/304 top model # list T2424GTE 843 T2430GTE 923 T2436GTE 981 T2448GTE 1000 T2460GTE 1079 T2472GTE 1160 T2484GTE 1547 T2496GTE 1647 T24108GTE 2503 T24120GTE 2564 T24132GTE 2512 T24144GTE 2572 T3030GTE 952 T3036GTE 1009 T3048GTE 1045 T3060GTE 1143 T3072GTE 1238 T3084GTE 1621 T3096GTE 1765 T30108GTE 2528 T30120GTE 2595 T30132GTE 2675 T30144GTE 2818 T3648GTE 1343 T3660GTE 1340 T3672GTE 1448 T3684GTE 1918 T3696GTE 2026 T36108GTE 2937 T36120GTE 3004 T36132GTE 3129 T36144GTE 3193 T4848GTE 2663 T4860GTE 2969 T4872GTE 3214 T4884GTE 4323 T4896GTE 4560 T48108GTE 6772 T48120GTE 6847 T48132GTE 7434 T48144GTE 7495

* t Marine 14/304 top model # list T2424GTEM 1340 T2430GTEM 1422 T2436GTEM 1483 T2448GTEM 1507 T2460GTEM 1589 T2472GTEM 1682 T2484GTEM 2025 T2496GTEM 2132 T24108GTEM 2765 T24120GTEM 2827 T24132GTEM 3024 T24144GTEM 3088 T3030GTEM 1458 T3036GTEM 1515 T3048GTEM 1554 T3060GTEM 1659 T3072GTEM 1762 T3084GTEM 2108 T3096GTEM 2248 T30108GTEM 2965 T30120GTEM 3032 T30132GTEM 3202 T30144GTEM 3268 T3648GTEM 1845 T3660GTEM 1979 T3672GTEM 2105 T3684GTEM 2516 T3696GTEM 2633 T36108GTEM 3413 T36120GTEM 3478 T36132GTEM 3679 T36144GTEM 3746 T4848GTEM 3496 T4860GTEM 3816 T4872GTEM 4139 T4884GTEM 5169 T4896GTEM 5416 T48108GTEM 7627 T48120GTEM 7693 T48132GTEM 8273 T48144GTEM 8337

24˝ 610 4 40 18.1 3.5 30˝ 762 4 45 20.4 3.8 36˝ 914 4 50 22.7 4.4 48˝ 1219 4 60 27.2 5.7 1524 4 70 31.8 7.1 24˝ 60˝ 72˝ 1829 4 80 36.3 8.5 width 84˝ 2134 4 90 40.8 11.2 (610mm) 96˝ 2438 6 100 45.4 11.2 108˝ 2743 6 110 49.9 14.0 120˝ 3048 6 120 54.4 14.0 132˝ 3353 8 130 59.0 16.8 144˝ 3658 8 140 63.5 16.8 30˝ 762 4 47 21.3 3.8 36˝ 914 4 53 24.0 4.4 48˝ 1219 4 65 29.5 5.7 60˝ 1524 4 77 34.9 7.1 30˝ 72˝ 1829 4 89 40.4 8.5 2134 4 101 45.8 11.2 width 84˝ 2438 6 113 51.3 11.2 (762mm) 96˝ 108˝ 2743 6 125 56.7 14.0 120˝ 3048 6 137 62.1 14.0 132˝ 3353 8 149 67.6 16.8 144˝ 3658 8 161 73.0 16.8 48˝ 1219 4 73 33.1 7.0 60˝ 1524 4 87 39.5 8.8 72˝ 1829 4 101 45.8 10.5 36˝ 84˝ 2134 4 115 52.2 12.2 2438 6 129 58.5 13.9 width 96˝ (914mm) 108˝ 2743 6 143 64.9 17.3 120˝ 3048 6 157 71.2 17.3 132˝ 3353 8 171 77.6 20.7 144˝ 3658 8 185 83.9 20.7 48˝ 1219 4 87 39.5 9.3 60˝ 1524 4 101 45.8 14.0 72˝ 1829 6 115 52.2 14.0 48˝ 84˝ 2134 8 120 54.4 18.7 2438 8 143 64.9 18.7 width 96˝ 2743 8 157 71.2 23.3 (1219mm) 108˝ 120˝ 3048 8 171 77.6 23.3 132˝ 3353 10 185 83.9 27.9 144˝ 3658 10 199 90.3 27.9 * On SPEC-MASTER® and SPEC-MASTER® Marine tables, increase stated weight by 10%. t SPEC-MASTER® Marine tables feature a marine counter edge to prevent spillage.

108

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


TABLES Catalog Section 10 • Tubular base. • 15⁄8˝ (41mm)-diameter legs and 11⁄4˝ (32mm)-diameter crossbracing are heavy gauge stainless steel. • Heavy gauge polished stainless steel top. EG10.43C EG10.43D • Offers worktables with a rolled edge on front and rear, with ends turned 90o, except SPEC-MASTER® Marine. 1 1 FEATURES: • 35 ⁄8˝ - 36 ⁄8˝ (892 - 918mm) adjustable working height.

Worktables with Stainless Steel Flat Top & Stainless Steel Tubular Base see spec sheets EG10.43A EG10.43B

Note: All shipping weights and cubic feet are approximate. NSF sprayed-on latex sound deadening available. To order, add $596 to list price and suffix “-SD”. Example: T2424STB-SD. For FLEX-MASTER® overshelf kits, see page 137.

corner connection See page 118 for optional casters available.

(Patent #5,165,349)

length in.

# of mm legs

weight lbs. kg

cu ft

BUDGET 16/430 top model # list T2424STB 997 T2430STB 1079 T2436STB 1135 T2448STB 1161 T2460STB 1245 T2472STB 1332 T2484STB 1616 T2496STB 1731 T24108STB 2660 T24120STB 2801 T24132STB 2861 T24144STB 2922 T3030STB 1131 T3036STB 1188 T3048STB 1233 T3060STB 1340 T3072STB 1441 T3084STB 1678 T3096STB 1861 T30108STB 2901 T30120STB 2965 T30132STB 3053 T30144STB 3207 T3648STB 1407 T3660STB 1542 T3672STB 1680 T3684STB 2280 T3696STB 2447 T36108STB 3338 T36120STB 3498 T36132STB 3614 T36144STB 3676 n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a

For drawer kits, see page 143.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

DELUXE *SPEC-MASTER® * t Marine 16/304 top 14/304 top 14/304 top model # list model # list model # list T2424STEB 1060 T2424STE 1136 T2424STEM 1643 T2430STEB 1158 T2430STE 1248 T2430STEM 1756 T2436STEB 1216 T2436STE 1307 T2436STEM 1815 T2448STEB 1255 T2448STE 1358 T2448STEM 1821 T2460STEB 1354 T2460STE 1471 T2460STEM 1978 T2472STEB 1457 T2472STE 1586 T2472STEM 2096 T2484STEB 1962 T2484STE 2122 T2484STEM 2555 T2496STEB 2092 T2496STE 2268 T2496STEM 2751 T24108STEB 2960 T24108STE 3206 T24108STEM 3447 T24120STEB 3026 T24120STE 3265 T24120STEM 3514 T24132STEB 3107 T24132STE 3369 T24132STEM 3778 T24144STEB 3171 T24144STE 3433 T24144STEM 3844 T3030STEB 1222 T3030STE 1318 T3030STEM 1825 T3036STEB 1278 T3036STE 1377 T3036STEM 1883 T3048STEB • 1340 T3048STE • 1455 T3048STEM 1959 T3060STEB • 1463 T3060STE • 1600 T3060STEM 2097 T3072STEB • 1586 T3072STE • 1729 T3072STEM 2303 T3084STEB 2043 T3084STE 2215 T3084STEM 2645 T3096STEB 2247 T3096STE 2445 T3096STEM 2742 T30108STEB 3160 T30108STE 3414 T30108STEM 3726 T30120STEB 3227 T30120STE 3479 T30120STEM 3788 T30132STEB 3342 T30132STE 3623 T30132STEM 4035 T30144STEB 3505 T30144STE 3794 T30144STEM 4100 T3648STEB 1560 T3648STE 1643 T3648STEM 2263 T3660STEB 1699 T3660STE 1799 T3660STEM 2428 T3672STEB 1844 T3672STE 1958 T3672STEM 2594 T3684STEB 2462 T3684STE 2603 T3684STEM 3141 T3696STEB 2641 T3696STE 2792 T3696STEM 3329 T36108STEB 3696 T36108STE 3949 T36108STEM 4275 T36120STEB 3803 T36120STE 4016 T36120STEM 4338 T36132STEB 4016 T36132STE 4180 T36132STEM 4623 T36144STEB 4133 T36144STE 4378 T36144STEM 4692 n/a n/a T4848STE 3186 T4848STEM 3924 n/a n/a T4860STE 3385 T4860STEM 4245 n/a n/a T4872STE 3687 T4872STEM 4540 n/a n/a T4884STE 4955 T4884STEM 5802 n/a n/a T4896STE 5331 T4896STEM 6183 n/a n/a T48108STE 7739 T48108STEM 8580 n/a n/a T48120STE 7792 T48120STEM 8642 n/a n/a T48132STE 8381 T48132STEM 9223 n/a n/a T48144STE 8447 T48144STEM 9284

24˝ 610 4 40 18.1 3.5 30˝ 762 4 45 20.4 3.8 36˝ 914 4 50 22.7 4.4 48˝ 1219 4 60 27.2 5.7 1524 4 70 31.8 7.1 24˝ 60˝ 72˝ 1829 4 80 36.3 8.5 width 84˝ 2134 4 90 40.8 11.2 (610mm) 96˝ 2438 6 100 45.4 11.2 108˝ 2743 6 110 49.9 14.0 120˝ 3048 6 120 54.4 14.0 132˝ 3353 8 130 59.0 16.8 144˝ 3658 8 140 63.5 16.8 30˝ 762 4 47 21.3 3.8 36˝ 914 4 53 24.0 4.4 48˝ 1219 4 65 29.5 5.7 60˝ 1524 4 77 34.9 7.1 30˝ 72˝ 1829 4 89 40.4 8.5 2134 4 101 45.8 11.2 width 84˝ 2438 6 113 51.3 11.2 (762mm) 96˝ 108˝ 2743 6 125 56.7 14.0 120˝ 3048 6 137 62.1 14.0 132˝ 3353 8 149 67.6 16.8 144˝ 3658 8 161 73.0 16.8 48˝ 1219 4 73 33.1 7.0 60˝ 1524 4 87 39.5 8.8 72˝ 1829 4 101 45.8 10.5 36˝ 84˝ 2134 4 115 52.2 12.2 2438 6 129 58.5 13.9 width 96˝ 2743 6 143 64.9 17.3 (914mm) 108˝ 120˝ 3048 6 157 71.2 17.3 132˝ 3353 8 171 77.6 20.7 144˝ 3658 8 185 83.9 20.7 48˝ 1219 4 87 39.5 9.3 60˝ 1524 4 101 45.8 14.0 72˝ 1829 6 115 52.2 14.0 48˝ 84˝ 2134 8 120 54.4 18.7 width 96˝ 2438 8 143 64.9 18.7 (1219mm) 108˝ 2743 8 157 71.2 23.3 120˝ 3048 8 171 77.6 23.3 132˝ 3353 10 185 83.9 27.9 144˝ 3658 10 199 90.3 27.9 * SPEC-MASTER® and SPEC-MASTER® Marine tables feature all stainless steel construction. Increase stated weight by 10%. t SPEC-MASTER® Marine tables feature a marine counter edge to prevent spillage. 100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

109


TABLES Catalog Section 10

Worktables with Stainless Steel Top, Upturn & Galvanized Legs/Undershelf see spec sheets EG10.02A EG10.02B EG10.02C FEATURES:

• 11⁄2˝ (38mm) upturn at the rear of the table. • 15⁄8˝ (41mm)-diameter legs and adjustable undershelf are heavy gauge galvanized steel. • Heavy gauge polished stainless steel top. • 351⁄8˝ - 361⁄8˝ (892 - 918mm) adjustable working height. Note: All shipping weights and cubic feet are approximate. NSF sprayed-on latex sound deadening available. To order, add $596 to list price and suffix “-SD”. Example: UT2424B-SD. Optional fixed undershelf available in place of standard adjustable undershelf. To order, add 10% to list price, and “-F” to end of suffix. Example: UT2424EB-F.

(Patent #5,165,349)

adjustable undershelf welded gusset

NOW

For FLEX-MASTER® overshelf kits, see page 137. For drawer kits, see page 143.

STANDARD!

Freight class is 70.0.

See page 118 for optional casters available.

in.

24˝ width (610mm)

30˝ width (762mm)

36˝ width (914mm)

length mm

24˝ 30˝ 36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝ 132˝ 144˝ 30˝ 36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝ 132˝ 144˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝ 132˝ 144˝

610 762 914 1219 1524 1829 2134 2438 2743 3048 3353 3658 762 914 1219 1524 1829 2134 2438 2743 3048 3353 3658 1219 1524 1829 2134 2438 2743 3048 3353 3658

# of weight legs lbs. kg 4 4 4 4 4 4 4 6 6 6 8 8 4 4 4 4 4 4 6 6 6 8 8 4 4 4 4 6 6 6 8 8

40 45 50 60 70 80 90 100 110 120 130 140 50 55 65 75 85 95 105 115 125 135 145 75 85 95 105 115 125 135 145 155

18.1 20.4 22.7 27.2 31.8 36.3 40.8 45.4 49.9 54.4 59.0 63.5 22.7 24.9 29.5 34.0 38.6 43.1 47.6 52.2 56.7 61.2 65.8 34.0 38.6 43.1 47.6 52.2 56.7 61.2 65.8 70.3

(•) MTS (made to stock) / ( ) MTO (made to order)

cu ft 3.5 3.8 4.4 5.7 7.1 8.5 11.2 11.2 14.0 14.0 16.8 16.8 3.8 4.4 5.7 7.1 8.5 11.2 11.2 14.0 14.0 16.8 16.8 7.0 8.8 10.5 12.2 13.9 17.3 17.3 20.7 20.7

BUDGET 16/430 top model # UT2424B UT2430B • UT2436B • UT2448B • UT2460B • UT2472B • UT2484B UT2496B UT24108B UT24120B UT24132B UT24144B UT3030B • UT3036B • UT3048B • UT3060B • UT3072B • UT3084B UT3096B • UT30108B UT30120B UT30132B UT30144B UT3648B UT3660B UT3672B UT3684B UT3696B UT36108B UT36120B UT36132B UT36144B

DELUXE 16/304 top list 719 775 828 842 891 947 1180 1334 2109 2152 2173 2185 794 849 860 933 1005 1236 1417 2136 2199 2309 2375 1053 1175 1277 1723 1825 2557 2622 2677 2823

model # UT2424EB UT2430EB UT2436EB UT2448EB UT2460EB UT2472EB UT2484EB UT2496EB UT24108EB UT24120EB UT24132EB UT24144EB UT3030EB UT3036EB UT3048EB UT3060EB UT3072EB UT3084EB UT3096EB UT30108EB UT30120EB UT30132EB UT30144EB UT3648EB UT3660EB UT3672EB UT3684EB UT3696EB UT36108EB UT36120EB UT36132EB UT36144EB

list 789 849 906 923 992 1067 1496 1593 2188 2319 2364 2499 879 938 960 1053 1139 1512 1642 2386 2455 2522 2584 1154 1278 1384 1844 1951 2748 2917 3005 3071

*SPEC-MASTER® 14/304 top model # list UT2424E 821 UT2430E 900 UT2436E 961 UT2448E 978 UT2460E 1058 UT2472E 1139 UT2484E 1526 UT2496E 1626 UT24108E 2299 UT24120E 2433 UT24132E 2562 UT24144E 2640 UT3030E 926 UT3036E 985 UT3048E 1019 UT3060E 1119 UT3072E 1216 UT3084E 1603 UT3096E 1741 UT30108E 2508 UT30120E 2574 UT30132E 2653 UT30144E 2715 UT3648E 1186 UT3660E 1318 UT3672E 1424 UT3684E 1897 UT3696E 2004 UT36108E 2834 UT36120E 2981 UT36132E 3108 UT36144E 3173

* On SPEC-MASTER® tables, increase stated weight by 10%.

110

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


TABLES Catalog Section 10

Worktables with Stainless Steel Top Upturn & Stainless Steel Legs/Undershelf see spec sheets EG10.48A EG10.48B EG10.48C FEATURES:

• 11⁄2˝ (38mm) upturn at the rear of the table. • 15⁄8˝ (41mm)-diameter legs and adjustable undershelf are heavy gauge stainless steel. • Heavy gauge polished stainless steel top. • 351⁄8˝ - 361⁄8˝ (892 - 918mm) adjustable working height. Note: All shipping weights and cubic feet are approximate. NSF sprayed-on latex sound deadening available. To order, add $596 to list price and suffix “-SD”. Example: UT2424SB-SD. For FLEX-MASTER® overshelf kits, see page 137. For drawer kits, see page 143.

(Patent #5,165,349)

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order) See page 118 for optional casters available.

in.

24˝ width (610mm)

30˝ width (762mm)

36˝ width (914mm)

length mm

24˝ 30˝ 36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝ 132˝ 144˝ 30˝ 36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝ 132˝ 144˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝ 132˝ 144˝

610 762 914 1219 1524 1829 2134 2438 2743 3048 3353 3658 762 914 1219 1524 1829 2134 2438 2743 3048 3353 3658 1219 1524 1829 2134 2438 2743 3048 3353 3658

# of legs 4 4 4 4 4 4 4 6 6 6 8 8 4 4 4 4 4 4 6 6 6 8 8 4 4 4 4 6 6 6 8 8

weight lbs. kg

cu ft

40 45 50 60 70 80 90 100 110 120 130 140 50 55 65 75 85 95 105 115 125 135 145 75 85 95 105 115 125 135 145 155

3.5 3.8 4.4 5.7 7.1 8.5 11.2 11.2 14.0 14.0 16.8 16.8 3.8 4.4 5.7 7.1 8.5 11.2 11.2 14.0 14.0 16.8 16.8 7.0 8.8 10.5 12.2 13.9 17.3 17.3 20.7 20.7

18.1 20.4 22.7 27.2 31.8 36.3 40.8 45.4 49.9 54.4 59.0 63.5 22.7 24.9 29.5 34.0 38.6 43.1 47.6 52.2 56.7 61.2 65.8 34.0 38.6 43.1 47.6 52.2 56.7 61.2 65.8 70.3

BUDGET 16/430 top model # UT2424SB UT2430SB UT2436SB UT2448SB UT2460SB UT2472SB UT2484SB UT2496SB UT24108SB UT24120SB UT24132SB UT24144SB UT3030SB UT3036SB UT3048SB UT3060SB UT3072SB UT3084SB UT3096SB UT30108SB UT30120SB UT30132SB UT30144SB UT3648SB UT3660SB UT3672SB UT3684SB UT3696SB UT36108SB UT36120SB UT36132SB UT36144SB

DELUXE 16/304 top list 980 1057 1114 1143 1224 1307 1595 1709 2718 2780 2839 2987 1111 1166 1209 1315 1422 1657 1840 2882 2946 3034 3094 1382 1520 1660 2256 2426 3411 3477 3697 3767

model # UT2424SEB UT2430SEB UT2436SEB UT2448SEB UT2460SEB UT2472SEB UT2484SEB UT2496SEB UT24108SEB UT24120SEB UT24132SEB UT24144SEB UT3030SEB UT3036SEB UT3048SEB UT3060SEB UT3072SEB UT3084SEB UT3096SEB UT30108SEB UT30120SEB UT30132SEB UT30144SEB UT3648SEB UT3660SEB UT3672SEB UT3684SEB UT3696SEB UT36108SEB UT36120SEB UT36132SEB UT36144SEB

list 1038 1134 1196 1234 1332 1429 1939 2064 2937 3004 3176 3240 1199 1260 1318 1442 1565 2019 2229 3139 3203 3317 3481 1535 1682 1825 2445 2615 3605 3778 3932 4114

*SPEC-MASTER® 14/304 top model # list UT2424SE 1115 UT2430SE 1227 UT2436SE 1286 UT2448SE 1339 UT2460SE 1453 UT2472SE 1565 UT2484SE 2104 UT2496SE 2247 UT24108SE 3177 UT24120SE 3242 UT24132SE 3344 UT24144SE 3511 UT3030SE 1295 UT3036SE 1351 UT3048SE 1428 UT3060SE 1568 UT3072SE 1707 UT3084SE 2192 UT3096SE 2421 UT30108SE 3396 UT30120SE 3461 UT30132SE 3705 UT30144SE 3774 UT3648SE 1619 UT3660SE 1777 UT3672SE 1932 UT3684SE 2586 UT3696SE 2777 UT36108SE 3929 UT36120SE 3996 UT36132SE 4161 UT36144SE 4353

* On SPEC-MASTER® tables, increase stated weight by 10%. All stainless steel construction.

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

111


TABLES Catalog Section 10

Worktables with Stainless Steel Top, Upturn & Galvanized Tubular Base see spec sheets EG10.03A EG10.03B EG10.03C FEATURES:

• 11⁄2˝ (38mm) upturn at the rear of the table. • Tubular base. • 15⁄8˝ (41mm)-diameter legs and 11⁄4˝ (32mm)-diameter crossbracing are heavy gauge galvanized steel. • Heavy gauge polished stainless steel top. • 351⁄8˝ - 361⁄8˝ (892 - 918mm) adjustable working height. Note: All shipping weights and cubic feet are approximate. NSF sprayed-on latex sound deadening available. To order, add $596 to list price and suffix “-SD”. Example: UT2424GTB-SD. For FLEX-MASTER® overshelf kits, see page 137. For drawer kits, see page 143.

corner connection

Freight class is 70.0. (Patent #5,165,349)

(•) MTS (made to stock) / ( ) MTO (made to order) See page 118 for optional casters available.

length # of in. mm legs

24˝ width (610mm)

30˝ width (762mm)

36˝ width (914mm)

24˝ 30˝ 36˝ 48 60˝ 72˝ 84˝ 96˝ 108˝ 120˝ 132˝ 144˝ 30˝ 36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝ 132˝ 144˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝ 132˝ 144˝

610 762 914 1219 1524 1829 2134 2438 2743 3048 3353 3658 762 914 1219 1524 1829 2134 2438 2743 3048 3353 3658 1219 1524 1829 2134 2438 2743 3048 3353 3658

4 4 4 4 4 4 4 6 6 6 8 8 4 4 4 4 4 4 6 6 6 8 8 4 4 4 4 6 6 6 8 8

weight lbs. kg 40 45 50 60 70 80 90 100 110 120 130 140 50 53 57 67 77 87 97 107 117 127 137 61 73 85 97 109 121 133 145 157

18.1 20.4 22.7 27.2 31.8 36.3 40.8 45.4 49.9 54.4 59.0 63.5 22.7 24.0 25.9 30.4 34.9 39.5 44.0 48.5 53.1 57.6 62.1 27.7 33.1 38.6 44.0 49.4 54.9 60.3 65.8 71.2

cu ft 3.5 3.8 4.4 5.7 7.1 8.5 11.2 11.2 14.0 14.0 16.8 16.8 3.8 4.4 5.7 7.1 8.5 11.2 11.2 14.0 14.0 16.8 16.8 7.0 8.8 10.5 12.2 13.9 17.3 17.3 20.7 20.7

BUDGET 16/430 top model # UT2424GTB UT2430GTB UT2436GTB UT2448GTB UT2460GTB UT2472GTB UT2484GTB UT2496GTB UT24108GTB UT24120GTB UT24132GTB UT24144GTB UT3030GTB UT3036GTB UT3048GTB UT3060GTB UT3072GTB UT3084GTB UT3096GTB UT30108GTB UT30120GTB UT30132GTB UT30144GTB UT3648GTB UT3660GTB UT3672GTB UT3684GTB UT3696GTB UT36108GTB UT36120GTB UT36132GTB UT36144GTB

DELUXE 16/304 top list 825 881 938 951 995 1054 1287 1441 2152 2283 2288 2296 899 956 968 1040 1111 1343 1524 2184 2303 2351 2413 1159 1282 1382 1832 1931 2664 2728 2781 2844

model # UT2424GTEB UT2430GTEB UT2436GTEB UT2448GTEB UT2460GTEB UT2472GTEB UT2484GTEB UT2496GTEB UT24108GTEB UT24120GTEB UT24132GTEB UT24144GTEB UT3030GTEB UT3036GTEB UT3048GTEB UT3060GTEB UT3072GTEB UT3084GTEB UT3096GTEB UT30108GTEB UT30120GTEB UT30132GTEB UT30144GTEB UT3648GTEB UT3660GTEB UT3672GTEB UT3684GTEB UT3696GTEB UT36108GTEB UT36120GTEB UT36132GTEB UT36144GTEB

list 899 960 1017 1031 1103 1181 1603 1702 2298 2429 2468 2531 988 1048 1069 1160 1248 1620 1751 2499 2564 2629 2693 1263 1391 1496 1958 2060 2876 3026 3114 3180

*SPEC-MASTER® 14/304 top model # list UT2424GTE 1013 UT2430GTE 1058 UT2436GTE 1076 UT2448GTE 1128 UT2460GTE 1165 UT2472GTE 1248 UT2484GTE 1636 UT2496GTE 1736 UT24108GTE 2404 UT24120GTE 2538 UT24132GTE 2595 UT24144GTE 2658 UT3030GTE 1038 UT3036GTE 1096 UT3048GTE 1133 UT3060GTE 1228 UT3072GTE 1325 UT3084GTE 1714 UT3096GTE 1851 UT30108GTE 2615 UT30120GTE 2684 UT30132GTE 2842 UT30144GTE 2913 UT3648GTE 1295 UT3660GTE 1426 UT3672GTE 1535 UT3684GTE 2005 UT3696GTE 2115 UT36108GTE 2940 UT36120GTE 3092 UT36132GTE 3215 UT36144GTE 3278

* On SPEC-MASTER® tables, increase stated weight by 10%.

112

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


TABLES Catalog Section 10

Worktables with Stainless Steel Top, Upturn & Stainless Steel Tubular Base see spec sheets EG10.49A EG10.49B EG10.49C FEATURES:

• 11⁄2˝ (38mm) upturn at the rear of the table. • Tubular base. • 15⁄8˝ (41mm)-diameter legs and 11⁄4˝ (32mm)-diameter crossbracing are heavy gauge stainless steel. • Heavy gauge polished stainless steel top. • 351⁄8˝ - 361⁄8˝ (892 - 918mm) adjustable working height. Note: All shipping weights and cubic feet are approximate. NSF sprayed-on latex sound deadening available. To order, add $596 to list price and suffix “-SD”. Example: UT2424STB-SD. For FLEX-MASTER® overshelf kits, see page 137. For drawer kits, see page 143.

corner connection

Freight class is 70.0. (Patent #5,165,349)

(•) MTS (made to stock) / ( ) MTO (made to order) See page 118 for optional casters available.

length

24˝ width (610mm)

30˝ width (762mm)

36˝ width (914mm)

in.

# of mm legs

weight lbs. kg

cu ft

24˝ 30˝ 36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝ 132˝ 144˝ 30˝ 36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝ 132˝ 144˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝ 132˝ 144˝

610 762 914 1219 1524 1829 2134 2438 2743 3048 3353 3658 762 914 1219 1524 1829 2134 2438 2743 3048 3353 3658 1219 1524 1829 2134 2438 2743 3048 3353 3658

40 45 50 60 70 80 90 100 110 120 130 140 50 53 57 67 77 87 97 107 117 127 137 61 73 85 97 109 121 133 145 157

3.5 3.8 4.4 5.7 7.1 8.5 11.2 11.2 14.0 14.0 16.8 16.8 3.8 4.4 5.7 7.1 8.5 11.2 11.2 14.0 14.0 16.8 16.8 7.0 8.8 10.5 12.2 13.9 17.3 17.3 20.7 20.7

4 4 4 4 4 4 4 6 6 6 8 8 4 4 4 4 4 4 6 6 6 8 8 4 4 4 4 6 6 6 8 8

18.1 20.4 22.7 27.2 31.8 36.3 40.8 45.4 49.9 54.4 59.0 63.5 22.7 24.0 25.9 30.4 34.9 39.5 44.0 48.5 53.1 57.6 62.1 27.7 33.1 38.6 44.0 49.4 54.9 60.3 65.8 71.2

BUDGET 16/430 top model # UT2424STB UT2430STB UT2436STB UT2448STB UT2460STB UT2472STB UT2484STB UT2496STB UT24108STB UT24120STB UT24132STB UT24144STB UT3030STB UT3036STB UT3048STB UT3060STB UT3072STB UT3084STB UT3096STB UT30108STB UT30120STB UT30132STB UT30144STB UT3648STB UT3660STB UT3672STB UT3684STB UT3696STB UT36108STB UT36120STB UT36132STB UT36144STB

DELUXE 16/304 top list 1102 1163 1222 1247 1332 1416 1703 1814 2744 2886 2945 2948 1219 1276 1318 1423 1525 1762 1946 2904 3051 3135 3201 1487 1629 1767 2364 2531 3418 3583 3694 3759

model # UT2424STEB UT2430STEB UT2436STEB UT2448STEB UT2460STEB UT2472STEB UT2484STEB UT2496STEB UT24108STEB UT24120STEB UT24132STEB UT24144STEB UT3030STEB UT3036STEB UT3048STEB UT3060STEB UT3072STEB UT3084STEB UT3096STEB UT30108STEB UT30120STEB UT30132STEB UT30144STEB UT3648STEB UT3660STEB UT3672STEB UT3684STEB UT3696STEB UT36108STEB UT36120STEB UT36132STEB UT36144STEB

list 1146 1245 1303 1344 1442 1541 2048 2179 2963 3114 3192 3258 1312 1371 1426 1553 1674 2131 2335 3248 3314 3426 3593 1645 1788 1932 2555 2727 3713 3887 4036 4222

*SPEC-MASTER® 14/304 top model # list UT2424STE 1222 UT2430STE 1339 UT2436STE 1396 UT2448STE 1448 UT2460STE 1561 UT2472STE 1674 UT2484STE 2212 UT2496STE 2361 UT24108STE 3287 UT24120STE 3356 UT24132STE 3451 UT24144STE 3621 UT3030STE 1403 UT3036STE 1462 UT3048STE 1540 UT3060STE 1682 UT3072STE 1818 UT3084STE 2303 UT3096STE 2528 UT30108STE 3504 UT30120STE 3566 UT30132STE 3816 UT30144STE 3882 UT3648STE 1733 UT3660STE 1887 UT3672STE 2044 UT3684STE 2693 UT3696STE 2883 UT36108STE 4039 UT36120STE 4105 UT36132STE 4251 UT36144STE 4337

* On SPEC-MASTER® tables, increase stated weight by 10%. SPEC-MASTER® tables feature all stainless steel construction.

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

113


TABLES Catalog Section 10 • 41⁄2˝ (114mm) backsplash at the rear of the table. • 15⁄8˝ (41mm)-diameter legs and adjustable undershelf are heavy gauge galvanized steel. • Heavy gauge polished stainless steel top. EG10.44C EG10.44D • SPEC-MASTER® Marine series worktables feature a marine counter edge on front and both ends. • 351⁄8˝ - 361⁄8˝ (892 - 918mm) adjustable working height. FEATURES:

Worktables with Stainless Steel Top, Backsplash & Galvanized Legs/Undershelf see spec sheets EG10.44A EG10.44B

Note: All shipping weights and cubic feet are approximate. Optional 101⁄2˝ (267mm) backsplash available for SPEC-MASTER® Marine series worktables. To order, add 10% to list price and replace suffix “-BS” with suffix “-10BS”. Example: T2424EM-10BS.

adjustable undershelf welded gusset

NOW

STANDARD!

NSF sprayed-on latex sound deadening available. To order, add $596 to list price and suffix “-SD”. Example: T2424B-BS-SD. (Patent #5,165,349)

For FLEX-MASTER® overshelf kits, see page 137. For drawer kits, see page 143.

24˝ width (610mm)

30˝ width (762mm)

36˝ width (914mm)

See page 118 for optional casters available.

length # of weight in. mm legs lbs. kg

cu ft

24˝ 30˝ 36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝ 132˝ 144˝ 30˝ 36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝ 132˝ 144˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝ 132˝ 144˝

3.5 3.8 4.4 5.7 7.1 8.5 11.2 11.2 14.0 14.0 16.8 16.8 3.8 4.4 5.7 7.1 8.5 11.2 11.2 14.0 14.0 16.8 16.8 7.0 8.8 10.5 12.2 13.9 17.3 17.3 20.7 20.7

610 762 914 1219 1524 1829 2134 2438 2743 3048 3353 3658 762 914 1219 1524 1829 2134 2438 2743 3048 3353 3658 1219 1524 1829 2134 2438 2743 3048 3353 3658

4 4 4 4 4 4 4 6 6 6 8 8 4 4 4 4 4 4 6 6 6 8 8 4 4 4 4 6 6 6 8 8

43 48 53 63 73 85 97 114 142 154 166 178 50 53 70 81 94 108 130 150 170 188 207 77 90 106 123 132 169 192 216 239

19.5 21.8 24.0 28.6 33.1 38.6 44.0 51.7 64.4 69.9 75.3 80.7 22.7 24.0 31.8 36.7 42.6 49.0 59.0 68.0 77.1 85.3 93.9 34.9 40.8 48.1 55.8 59.9 76.7 87.1 98.0 108.4

BUDGET 16/430 top model # list T2424B-BS 873 T2430B-BS • 933 T2436B-BS • 987 T2448B-BS • 994 T2460B-BS • 1061 T2472B-BS • 1122 T2484B-BS 1376 T2496B-BS 1536 T24108B-BS 2313 T24120B-BS 2375 T24132B-BS 2433 T24144B-BS 2564 T3030B-BS • 951 T3036B-BS • 1008 T3048B-BS • 1025 T3060B-BS • 1100 T3072B-BS • 1174 T3084B-BS 1440 T3096B-BS • 1629 T30108B-BS 2439 T30120B-BS 2504 T30132B-BS 2651 T30144B-BS 2713 T3648B-BS 1333 T3660B-BS 1443 T3672B-BS 1532 T3684B-BS 1809 T3696B-BS 2034 T36108B-BS 2876 T36120B-BS 2939 T36132B-BS 3020 T36144B-BS 3083

Optional fixed undershelf available in place of standard adjustable undershelf. To order, add 10% to list price, and “-F” to end of suffix. Example: T3048EM-BS-F.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

DELUXE *SPEC-MASTER® 16/304 top 14/304 top model # list model # list T2424EB-BS 953 T2424E-BS 977 T2430EB-BS 1029 T2430E-BS 1060 T2436EB-BS 1088 T2436E-BS 1118 T2448EB-BS 1113 T2448E-BS 1145 T2460EB-BS 1193 T2460E-BS 1228 T2472EB-BS 1273 T2472E-BS 1318 T2484EB-BS 1620 T2484E-BS 1676 T2496EB-BS 1749 T2496E-BS 1788 T24108EB-BS 2477 T24108E-BS 2560 T24120EB-BS 2534 T24120E-BS 2615 T24132EB-BS 2536 T24132E-BS 2679 T24144EB-BS 2734 T24144E-BS 2824 T3030EB-BS 1060 T3030E-BS 1091 T3036EB-BS 1118 T3036E-BS 1148 T3048EB-BS 1154 T3048E-BS 1192 T3060EB-BS 1248 T3060E-BS 1292 T3072EB-BS 1347 T3072E-BS 1396 T3084EB-BS 1696 T3084E-BS 1756 T3096EB-BS 1839 T3096E-BS 1904 T30108EB-BS 2603 T30108E-BS 2693 T30120EB-BS 2672 T30120E-BS 2759 T30132EB-BS 2827 T30132E-BS 2929 T30144EB-BS 2893 T30144E-BS 2995 T3648EB-BS 1389 T3648E-BS 1429 T3660EB-BS 1589 T3660E-BS 1643 T3672EB-BS 1698 T3672E-BS 1759 T3684EB-BS 1988 T3684E-BS 2060 T3696EB-BS 2237 T3696E-BS 2315 T36108EB-BS 3055 T36108E-BS 3158 T36120EB-BS 3120 T36120E-BS 3224 T36132EB-BS 3212 T36132E-BS 3421 T36144EB-BS 3372 T36144E-BS 3492

* On SPEC-MASTER® and SPEC-MASTER® Marine tables, increase stated weight by 10%. t SPEC-MASTER® Marine tables feature a marine counter edge to prevent spillage.

114

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

* t Marine 14/304 top model # list T2424EM-BS 1641 T2430EM-BS 1779 T2436EM-BS 1786 T2448EM-BS 1868 T2460EM-BS 1902 T2472EM-BS 1991 T2484EM-BS 2345 T2496EM-BS 2460 T24108EM-BS 3118 T24120EM-BS 3276 T24132EM-BS 3386 T24144EM-BS 3451 T3030EM-BS 1745 T3036EM-BS 1756 T3048EM-BS 1917 T3060EM-BS 2029 T3072EM-BS 2075 T3084EM-BS 2505 T3096EM-BS 2661 T30108EM-BS 3333 T30120EM-BS 3396 T30132EM-BS 3576 T30144EM-BS 3637 T3648EM-BS 2168 T3660EM-BS 2305 T3672EM-BS 2432 T3684EM-BS 2859 T3696EM-BS 2976 T36108EM-BS 3794 T36120EM-BS 3857 T36132EM-BS 4071 T36144EM-BS 3927


TABLES Catalog Section 10 • 41⁄2˝ (114mm) backsplash at the rear of the table. • 15⁄8˝ (41mm)-diameter legs and adjustable undershelf are heavy gauge stainless steel. EG10.45C EG10.45D • Heavy gauge polished stainless steel top. • SPEC-MASTER® Marine series worktables feature a marine counter edge on front and both ends. • 351⁄8˝ - 361⁄8˝ (892 - 918mm) adjustable working height. FEATURES:

Worktables with Stainless Steel Top, Backsplash & Stainless Steel Legs/Undershelf see spec sheets EG10.45A EG10.45B

Note: All shipping weights and cubic feet are approximate. Optional 101⁄2˝ (267mm) backsplash available for SPECMASTER® Marine series worktables. To order, add 10% to list price and replace suffix “-BS” with suffix “-10BS”. Example: T2424SEM-10BS. NSF sprayed-on latex sound deadening available. To order, add $596 to list price and suffix “-SD”. Example: T2424SB-BS-SD. (Patent #5,165,349)

For FLEX-MASTER® overshelf kits, see page 137. For drawer kits, see page 143.

See page 118 for optional casters available.

length in. mm

24˝ width (610mm)

30˝ width (762mm)

36˝ width (914mm)

24˝ 30˝ 36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝ 132˝ 144˝ 30˝ 36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝ 132˝ 144˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝ 132˝ 144˝

610 762 914 1219 1524 1829 2134 2438 2743 3048 3353 3658 762 914 1219 1524 1829 2134 2438 2743 3048 3353 3658 1219 1524 1829 2134 2438 2743 3048 3353 3658

# of legs 4 4 4 4 4 4 4 6 6 6 8 8 4 4 4 4 4 4 6 6 6 8 8 4 4 4 4 6 6 6 8 8

weight lbs. kg 43 48 53 63 73 85 97 114 142 154 166 178 50 53 70 81 94 108 130 150 170 188 207 77 90 106 123 132 169 192 216 239

19.5 21.8 24.0 28.6 33.1 38.6 44.0 51.7 64.4 69.9 75.3 80.7 22.7 24.0 31.8 36.7 42.6 49.0 59.0 68.0 77.1 85.3 93.9 34.9 40.8 48.1 55.8 59.9 76.7 87.1 98.0 108.4

cu ft 3.5 3.8 4.4 5.7 7.1 8.5 11.2 11.2 14.0 14.0 16.8 16.8 3.8 4.4 5.7 7.1 8.5 11.2 11.2 14.0 14.0 16.8 16.8 7.0 8.8 10.5 12.2 13.9 17.3 17.3 20.7 20.7

BUDGET 16/430 top model # list T2424SB-BS 1199 T2430SB-BS 1292 T2436SB-BS 1347 T2448SB-BS 1376 T2460SB-BS 1459 T2472SB-BS 1545 T2484SB-BS 1832 T2496SB-BS 1942 T24108SB-BS 2759 T24120SB-BS 3015 T24132SB-BS 3069 T24144SB-BS 3224 T3030SB-BS • 1346 T3036SB-BS 1404 T3048SB-BS 1448 T3060SB-BS 1552 T3072SB-BS • 1648 T3084SB-BS 1889 T3096SB-BS 2076 T30108SB-BS 3115 T30120SB-BS 3180 T30132SB-BS 3357 T30144SB-BS 3420 T3648SB-BS 1616 T3660SB-BS 1757 T3672SB-BS 1896 T3684SB-BS 2491 T3696SB-BS 2659 T36108SB-BS 3647 T36120SB-BS 3711 T36132SB-BS 3933 T36144SB-BS 4003

DELUXE 16/304 top model # list T2424SEB-BS 1249 T2430SEB-BS 1345 T2436SEB-BS • 1407 T2448SEB-BS • 1457 T2460SEB-BS 1565 T2472SEB-BS 1674 T2484SEB-BS 2148 T2496SEB-BS 2288 T24108SEB-BS 3188 T24120SEB-BS 3251 T24132SEB-BS 3442 T24144SEB-BS 3507 T3030SEB-BS 1412 T3036SEB-BS • 1471 T3048SEB-BS • 1536 T3060SEB-BS • 1672 T3072SEB-BS • 1801 T3084SEB-BS 2229 T3096SEB-BS • 2445 T30108SEB-BS 3379 T30120SEB-BS 3446 T30132SEB-BS 3679 T30144SEB-BS 3746 T3648SEB-BS 1804 T3660SEB-BS 2037 T3672SEB-BS 2184 T3684SEB-BS 2598 T3696SEB-BS 2780 T36108SEB-BS 3944 T36120SEB-BS 4007 T36132SEB-BS 4159 T36144SEB-BS 4224

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

*SPEC-MASTER® 14/304 top model # list T2424SE-BS 1320 T2430SE-BS 1436 T2436SE-BS 1526 T2448SE-BS • 1560 T2460SE-BS • 1676 T2472SE-BS 1798 T2484SE-BS 2303 T2496SE-BS 2456 T24108SE-BS 3421 T24120SE-BS 3481 T24132SE-BS 3591 T24144SE-BS 3766 T3030SE-BS 1508 T3036SE-BS 1567 T3048SE-BS • 1647 T3060SE-BS • 1793 T3072SE-BS • 1940 T3084SE-BS 2391 T3096SE-BS 2632 T30108SE-BS 3633 T30120SE-BS 3700 T30132SE-BS 3961 T30144SE-BS 4025 T3648SE-BS 1939 T3660SE-BS 2185 T3672SE-BS 2343 T3684SE-BS 2792 T3696SE-BS 2991 T36108SE-BS 4239 T36120SE-BS 4306 T36132SE-BS 4476 T36144SE-BS 4676

* t Marine 14/304 top model # list T2424SEM-BS 1931 T2430SEM-BS 2044 T2436SEM-BS 2104 T2448SEM-BS 2158 T2460SEM-BS 2267 T2472SEM-BS 2380 T2484SEM-BS 2842 T2496SEM-BS 2983 T24108SEM-BS 3748 T24120SEM-BS 3808 T24132SEM-BS 4069 T24144SEM-BS 4134 T3030SEM-BS 2113 T3036SEM-BS 2172 T3048SEM-BS 2246 T3060SEM-BS 2384 T3072SEM-BS 2521 T3084SEM-BS 2932 T3096SEM-BS 3151 T30108SEM-BS 4016 T30120SEM-BS 4081 T30132SEM-BS 4325 T30144SEM-BS 4393 T3648SEM-BS 2558 T3660SEM-BS 2719 T3672SEM-BS 2885 T3684SEM-BS 3434 T3696SEM-BS 3621 T36108SEM-BS 4558 T36120SEM-BS 4624 T36132SEM-BS 4917 T36144SEM-BS 4985

* SPEC-MASTER® and SPEC-MASTER® Marine tables feature all stainless steel construction. Increase stated weight by 10%. t SPEC-MASTER® Marine tables feature a marine counter edge to prevent spillage. 100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

115


TABLES Catalog Section 10 • 41⁄2˝ (114mm) backsplash at the rear of the table. • Tubular base. • 15⁄8˝ (41mm)-diameter legs and 11⁄4˝ (32mm)-diameter crossbracing are heavy gauge galvanized steel. EG10.46C EG10.46D • Heavy gauge polished stainless steel top. • SPEC-MASTER® Marine series worktables feature a marine counter edge on front and both ends. • 351⁄8˝ - 361⁄8˝ (892 - 918mm) adjustable working height. FEATURES:

Worktables with Stainless Steel Top, Backsplash & Galvanized Tubular Base see spec sheets EG10.46A EG10.46B

Note: All shipping weights and cubic feet are approximate. Optional 101⁄2˝ (267mm) backsplash available for SPEC-MASTER® Marine series worktables. To order, add 10% to list price and replace suffix “-BS” with suffix “-10BS”. Example: T2424GTEM-10BS.

corner connection

NSF sprayed-on latex sound deadening available. To order, add $596 to list price and suffix “-SD”. Example: T2424GTB-BS-SD.

(Patent #5,165,349) For FLEX-MASTER® overshelf kits, see page 137. For drawer kits, see page 143.

24˝ width (610mm)

30˝ width (762mm)

36˝ width (914mm)

length # of weight in. mm legs lbs. kg

cu ft

24˝ 30˝ 36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝ 132˝ 144˝ 30˝ 36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝ 132˝ 144˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝ 132˝ 144˝

3.5 3.8 4.4 5.7 7.1 8.5 11.2 11.2 14.0 14.0 16.8 16.8 3.8 4.4 5.7 7.1 8.5 11.2 11.2 14.0 14.0 16.8 16.8 7.0 8.8 10.5 12.2 13.9 17.3 17.3 20.7 20.7

610 762 914 1219 1524 1829 2134 2438 2743 3048 3353 3658 762 914 1219 1524 1829 2134 2438 2743 3048 3353 3658 1219 1524 1829 2134 2438 2743 3048 3353 3658

4 4 4 4 4 4 4 6 6 6 8 8 4 4 4 4 4 4 6 6 6 8 8 4 4 4 4 6 6 6 8 8

41 46 51 61 71 81 91 101 111 121 131 141 51 56 66 76 86 96 106 116 126 136 146 71 81 91 101 111 121 131 141 151

18.6 20.9 23.1 27.7 32.2 36.7 41.3 45.8 50.3 54.9 59.4 64.0 23.1 25.4 29.9 34.5 39.0 43.6 48.1 52.6 57.2 61.7 66.2 32.1 36.7 41.3 45.8 50.3 54.9 59.4 64.0 68.5

Freight class is 70.0.

See page 118 for optional casters available.

BUDGET 16/430 top model # list T2424GTB-BS 982 T2430GTB-BS 1039 T2436GTB-BS 1098 T2448GTB-BS 1100 T2460GTB-BS 1169 T2472GTB-BS 1229 T2484GTB-BS 1482 T2496GTB-BS 1642 T24108GTB-BS 2351 T24120GTB-BS 2481 T24132GTB-BS 2534 T24144GTB-BS 2595 T3030GTB-BS 1057 T3036GTB-BS 1114 T3048GTB-BS 1128 T3060GTB-BS 1206 T3072GTB-BS 1280 T3084GTB-BS 1549 T3096GTB-BS 1734 T30108GTB-BS 2548 T30120GTB-BS 2607 T30132GTB-BS 2756 T30144GTB-BS 2827 T3648GTB-BS 1440 T3660GTB-BS 1552 T3672GTB-BS 1587 T3684GTB-BS 1916 T3696GTB-BS 2072 T36108GTB-BS 2897 T36120GTB-BS 3045 T36132GTB-BS 3125 T36144GTB-BS 3184

(•) MTS (made to stock) / ( ) MTO (made to order)

DELUXE 16/304 top model # list T2424GTEB-BS 1061 T2430GTEB-BS 1143 T2436GTEB-BS 1199 T2448GTEB-BS 1219 T2460GTEB-BS 1301 T2472GTEB-BS 1384 T2484GTEB-BS 1734 T2496GTEB-BS 1841 T24108GTEB-BS 2512 T24120GTEB-BS 2647 T24132GTEB-BS 2701 T24144GTEB-BS 2780 T3030GTEB-BS 1167 T3036GTEB-BS 1227 T3048GTEB-BS 1263 T3060GTEB-BS 1358 T3072GTEB-BS 1460 T3084GTEB-BS 1804 T3096GTEB-BS 1948 T30108GTEB-BS 2640 T30120GTEB-BS 2784 T30132GTEB-BS 2856 T30144GTEB-BS 2920 T3648GTEB-BS 1498 T3660GTEB-BS 1699 T3672GTEB-BS 1805 T3684GTEB-BS 2103 T3696GTEB-BS 2343 T36108GTEB-BS 3075 T36120GTEB-BS 3232 T36132GTEB-BS 3316 T36144GTEB-BS 3381

*SPEC-MASTER® 14/304 top model # list T2424GTE-BS 1087 T2430GTE-BS 1167 T2436GTE-BS 1227 T2448GTE-BS 1255 T2460GTE-BS 1340 T2472GTE-BS 1426 T2484GTE-BS 1787 T2496GTE-BS 1900 T24108GTE-BS 2597 T24120GTE-BS 2727 T24132GTE-BS 2785 T24144GTE-BS 2849 T3030GTE-BS 1199 T3036GTE-BS 1260 T3048GTE-BS 1299 T3060GTE-BS 1400 T3072GTE-BS 1507 T3084GTE-BS 1867 T3096GTE-BS 2011 T30108GTE-BS 2801 T30120GTE-BS 2866 T30132GTE-BS 2951 T30144GTE-BS 3016 T3648GTE-BS 1541 T3660GTE-BS 1753 T3672GTE-BS 1868 T3684GTE-BS 2172 T3696GTE-BS 2426 T36108GTE-BS 3268 T36120GTE-BS 3334 T36132GTE-BS 3433 T36144GTE-BS 3496

* On SPEC-MASTER® and SPEC-MASTER® Marine tables, increase stated weight by 10%. t SPEC-MASTER® Marine tables feature a marine counter edge to prevent spillage.

116

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

* t Marine 14/304 top model # T2424GTEM-BS T2430GTEM-BS T2436GTEM-BS T2448GTEM-BS T2460GTEM-BS T2472GTEM-BS T2484GTEM-BS T2496GTEM-BS T24108GTEM-BS T24120GTEM-BS T24132GTEM-BS T24144GTEM-BS T3030GTEM-BS T3036GTEM-BS T3048GTEM-BS T3060GTEM-BS T3072GTEM-BS T3084GTEM-BS T3096GTEM-BS T30108GTEM-BS T30120GTEM-BS T30132GTEM-BS T30144GTEM-BS T3648GTEM-BS T3660GTEM-BS T3672GTEM-BS T3684GTEM-BS T3696GTEM-BS T36108GTEM-BS T36120GTEM-BS T36132GTEM-BS T36144GTEM-BS

list 1799 1892 1949 1978 2064 2161 2526 2645 3327 3383 3600 3662 1919 1978 2026 2136 2247 2614 2777 3541 3604 3788 3857 2337 2479 2613 3052 3175 4014 4079 4299 4145


TABLES Catalog Section 10

Worktables with Stainless Steel Top, Backsplash & Stainless Steel Tubular Base see spec sheets EG10.47A EG10.47B EG10.47C EG10.47D

FEATURES:

• 41⁄2˝ (114mm) backsplash at the rear of the table. • Tubular base. • 15⁄8˝ (41mm)-diameter legs and 11⁄4˝ (32mm)-diameter crossbracing are heavy gauge stainless steel. • Heavy gauge polished stainless steel top. • SPEC-MASTER® Marine series worktables feature a marine counter edge on front and both ends. • 351⁄8˝ - 361⁄8˝ (892 - 918mm) adjustable working height. Note: All shipping weights and cubic feet are approximate. Optional 101⁄2˝ (267mm) backsplash available for SPEC-MASTER® Marine series worktables. To order, add 10% to list price and replace suffix “-BS” with suffix “-10BS”. Example: T2424STEM-10BS.

corner connection (Patent #5,165,349)

NSF sprayed-on latex sound deadening available. To order, add $596 to list price and suffix “-SD”. Example: T2424STB-BS-SD.

For FLEX-MASTER® overshelf kits, see page 137. See page 118 for optional casters available.

For drawer kits, see page 143.

length # of in. mm legs

24˝ width (610mm)

30˝ width (762mm)

36˝ width (914mm)

24˝ 30˝ 36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝ 132˝ 144˝ 30˝ 36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝ 132˝ 144˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝ 132˝ 144˝

610 762 914 1219 1524 1829 2134 2438 2743 3048 3353 3658 762 914 1219 1524 1829 2134 2438 2743 3048 3353 3658 1219 1524 1829 2134 2438 2743 3048 3353 3658

4 4 4 4 4 4 4 6 6 6 8 8 4 4 4 4 4 4 6 6 6 8 8 4 4 4 4 6 6 6 8 8

weight lbs. kg 41 46 51 61 71 81 91 101 111 121 131 141 51 56 66 76 86 96 106 116 126 136 146 71 81 91 101 111 121 131 141 151

18.6 20.9 23.1 27.7 32.2 36.7 41.3 45.8 50.3 54.9 59.4 64.0 23.1 25.4 29.9 34.5 39.0 43.6 48.1 52.6 57.2 61.7 66.2 32.1 36.7 41.3 45.8 50.3 54.9 59.4 64.0 68.5

cu ft 3.5 3.8 4.4 5.7 7.1 8.5 11.2 11.2 14.0 14.0 16.8 16.8 3.8 4.4 5.7 7.1 8.5 11.2 11.2 14.0 14.0 16.8 16.8 7.0 8.8 10.5 12.2 13.9 17.3 17.3 20.7 20.7

BUDGET 16/430 top model # list T2424STB-BS 1305 T2430STB-BS 1398 T2436STB-BS 1455 T2448STB-BS 1482 T2460STB-BS 1564 T2472STB-BS 1652 T2484STB-BS 1935 T2496STB-BS 2048 T24108STB-BS 2973 T24120STB-BS 3122 T24132STB-BS 3173 T24144STB-BS 3234 T3030STB-BS 1454 T3036STB-BS • 1511 T3048STB-BS 1553 T3060STB-BS 1659 T3072STB-BS 1762 T3084STB-BS 1995 T3096STB-BS 2184 T30108STB-BS 3224 T30120STB-BS 3288 T30132STB-BS 3366 T30144STB-BS 3424 T3648STB-BS 1723 T3660STB-BS 1861 T3672STB-BS 1998 T3684STB-BS 2596 T3696STB-BS 2769 T36108STB-BS 3755 T36120STB-BS 3819 T36132STB-BS 3923 T36144STB-BS 3985

DELUXE 16/304 top model # list T2424STEB-BS 1360 T2430STEB-BS 1458 T2436STEB-BS 1515 T2448STEB-BS 1565 T2460STEB-BS 1674 T2472STEB-BS 1785 T2484STEB-BS 2258 T2496STEB-BS 2394 T24108STEB-BS 3201 T24120STEB-BS 3361 T24132STEB-BS 3449 T24144STEB-BS 3618 T3030STEB-BS 1522 T3036STEB-BS 1581 T3048STEB-BS 1646 T3060STEB-BS 1782 T3072STEB-BS 1914 T3084STEB-BS 2335 T3096STEB-BS 2555 T30108STEB-BS 3448 T30120STEB-BS 3488 T30132STEB-BS 3788 T30144STEB-BS 3857 T3648STEB-BS 1917 T3660STEB-BS 2144 T3672STEB-BS 2294 T3684STEB-BS 2709 T3696STEB-BS 2891 T36108STEB-BS 3937 T36120STEB-BS 4120 T36132STEB-BS 4271 T36144STEB-BS 4332

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

*SPEC-MASTER® 14/304 top model # list T2424STE-BS 1428 T2430STE-BS 1548 T2436STE-BS 1607 T2448STE-BS 1667 T2460STE-BS 1787 T2472STE-BS 1907 T2484STE-BS 2413 T2496STE-BS 2566 T24108STE-BS 3426 T24120STE-BS 3593 T24132STE-BS 3703 T24144STE-BS 3766 T3030STE-BS 1618 T3036STE-BS 1680 T3048STE-BS 1768 T3060STE-BS 1906 T3072STE-BS 2049 T3084STE-BS 2503 T3096STE-BS 2737 T30108STE-BS 3742 T30120STE-BS 3811 T30132STE-BS 4071 T30144STE-BS 4135 T3648STE-BS 2048 T3660STE-BS 2297 T3672STE-BS 2457 T3684STE-BS 2905 T3696STE-BS 3102 T36108STE-BS 4349 T36120STE-BS 4413 T36132STE-BS 4722 T36144STE-BS 4793

* t Marine 14/304 top model # T2424STEM-BS T2430STEM-BS T2436STEM-BS T2448STEM-BS T2460STEM-BS T2472STEM-BS T2484STEM-BS T2496STEM-BS T24108STEM-BS T24120STEM-BS T24132STEM-BS T24144STEM-BS T3030STEM-BS T3036STEM-BS T3048STEM-BS T3060STEM-BS T3072STEM-BS T3084STEM-BS T3096STEM-BS T30108STEM-BS T30120STEM-BS T30132STEM-BS T30144STEM-BS T3648STEM-BS T3660STEM-BS T3672STEM-BS T3684STEM-BS T3696STEM-BS T36108STEM-BS T36120STEM-BS T36132STEM-BS T36144STEM-BS

list 2043 2157 2214 2264 2379 2493 2951 3094 3853 3919 4181 4247 2223 2285 2360 2421 2634 3044 3263 4128 4194 4437 4504 2443 2744 2996 3545 3732 4672 4736 5025 5092

* SPEC-MASTER® and SPEC-MASTER® Marine tables feature all stainless steel construction. Increase stated weight by 10%. t SPEC-MASTER® Marine tables feature a marine counter edge to prevent spillage. 100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

117


TABLES Catalog Section 10 Note:

Optional Casters see spec sheet

description

To determine set of casters applicable, see “# of legs” column in Worktables charts (pages 106-117).

EG10.59

Freight class is 65.0. (•) MTS (made to stock) / ( ) MTO (made to order)

wt. cap. per caster lbs. kg

model #

list

115 115 115 200 200 200

CA4-SB CA6-SB CA8-SB CAH4-SB CAH6-SB CAH8-SB

367 549 733 487 729 729

Zinc with Resilient Tread 4˝ (102mm) dia., set of four (two swivel, two w/brake) 4˝ (102mm) dia., set of six (three swivel, three w/brake) 4˝ (102mm) dia., set of eight (four swivel, four w/brake) 5˝ (127mm) dia., set of four (two swivel, two w/brake) 5˝ (127mm) dia., set of six (three swivel, three w/brake) 5˝ (127mm) dia., set of eight (four swivel, four w/brake)

52.2 52.2 52.2 90.7 90.7 90.7

zinc casters

Zinc with Poly Tread 5˝ (127mm) dia., set of four (two swivel, two w/brake) 5˝ (127mm) dia., set of six (three swivel, three w/brake) 5˝ (127mm) dia., set of eight (four swivel, four w/brake)

250 250 250

113.4 113.4 113.4

CAHP4-SB CAHP6-SB CAHP8-SB

421 632 842

250 250 250

113.4 113.4 113.4

CAHW4-SB 523 CAHW6-SB 785 CAHW8-SB 1045

Polymer Cart Washable with Polymer Tread 5˝ (127mm) dia., set of four (two swivel, two w/brake) 5˝ (127mm) dia., set of six (three swivel, three w/brake) 5˝ (127mm) dia., set of eight (four swivel, four w/brake)

Optional LIFESTOR® Undershelves for Stainless Steel Worktables see spec sheet

EG10.53

FEATURES:

cart washable casters

• Solid polymer shelf sections available for tubular-base tables only. • Dishwasher-safe and non-corrosive. • Four-sided adjustable stainless steel bracing Note:

Undershelves work with any Tubular worktable at time of order and cannot retrofit in field due to leg spacing. Recommended for use with stationary tables only. To order undershelves, add suffix “-L1” to worktable model number. Example: T2484STB-L1. See chart below for pricing. See page 82 for optional tray drying racks.

removable shelf sections

(Patent #5,165,349)

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Featuring MICROGARD® an antimicrobial agent which contains built-in protection to retard the growth of a broad range of bacteria, mold and mildew on shelf surface that causes stains, odors and degradation. Standard on all LIFESTOR® Shelving.

For 24˝ (610mm) wide worktables ®

worktable LIFESTOR length undershelf in. mm list 24˝ 610 97 30˝ 762 113 36˝ 914 134 48˝ 1219 156 60˝ 1524 194 72˝ 1829 218

118

ONLY machine washable undershelf in the market today!

For 30˝ (762mm) wide worktables ®

worktable LIFESTOR length undershelf in. mm list 84˝ 2134 239 96˝ 2438 349 108˝ 2743 385 120˝ 3048 394 132˝ 3353 428 144˝ 3658 467

worktable LIFESTOR® length undershelf in. mm list 30˝ 762 128 36˝ 914 155 48˝ 1219 174 60˝ 1524 236 72˝ 1829 266 84˝ 2134 294

worktable LIFESTOR® length undershelf in. mm list 96˝ 2438 418 108˝ 2743 469 120˝ 3048 478 132˝ 3353 511 144˝ 3658 566

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


TABLES Catalog Section 10

Hardwood Worktables

• 13⁄4˝ (44mm) hardwood tops. • With flat top or with 4˝ (102mm) coved backsplash and end splashes. • Shipped knocked down.

“BAKERS’ TABLES” see spec sheet

EG10.10

FEATURES:

Note:

All shipping weights and cubic feet are approximate. For optional drawer assemblies, see page 142.

Freight class is 55.0. (•) MTS (made to stock) / ( ) MTO (made to order)

hardwood table with flat top and undershelf…

…with flat top and tubular base…

…with backsplash and undershelf…

…with backsplash and tubular base

Flat Top Hardwood Worktables… …with Adjustable Undershelf length in. mm 48˝ 60˝ 72˝ (610mm) 96˝ 30˝ 48˝ 60˝ width 72˝ (762mm) 96˝

24˝ width

1219 1524 1829 2438 1219 1524 1829 2438

cu ft

weight lbs. kg

5.3 6.6 8.0 10.7 6.7 8.3 9.9 13.2

94 118 141 189 141 147 177 235

42.6 53.5 64.0 85.7 64.0 66.7 80.3 106.6

galvanized legs & undershelf model # list MT2448B 815 MT2460B 914 MT2472B 1014 MT2496B 1437 MT3048B 899 MT3060B 1022 MT3072B 1143 MT3096B 1638

…with Tubular Base

stainless steel legs and undershelf weight model # list lbs. kg MT2448S 981 92 41.7 MT2460S 1113 117 53.1 MT2472S 1244 138 62.6 MT2496S 1735 182 82.6 MT3048S 1113 139 63.1 MT3060S 1275 145 65.8 MT3072S 1438 174 77.8 MT3096S 2004 230 104.3

galvanized tubular base model # list MT2448GT 724 MT2460GT 801 MT2472GT 878 MT2496GT 1260 MT3048GT 813 MT3060GT 913 MT3072GT 1011 MT3096GT 1456

stainless steel tubular base model # list MT2448ST 923 MT2460ST 1034 MT2472ST 1149 MT2496ST 1436 MT3048ST 1056 MT3060ST 1205 MT3072ST 1348 MT3096ST 1885

Hardwood Worktables with Backsplash & End Splashes… …with Adjustable Undershelf length in. mm

30˝ width

60˝ 72˝ (762mm) 96˝

cu ft

1524 1829 2438

9.8 11.7 15.5

…with Tubular Base

galvanized legs stainless steel legs weight & undershelf and undershelf lbs. kg model # list model # list 149 67.6 MT3060B-BS 1797 MT3060S-BS 2327 180 81.6 MT3072B-BS 2161 MT3072S-BS 2660 240 108.9 MT3096B-BS 2956 MT3096S-BS 3519

weight lbs. kg 147 177 235

66.7 80.3 106.6

galvanized tubular base model # list MT3060GT-BS 1681 MT3072GT-BS 2020 MT3096GT-BS 2769

stainless steel tubular base model # list MT3060ST-BS 2207 MT3072ST-BS 2591 MT3096ST-BS 3333

Optional Casters for Hardwood Worktables

zinc casters

cart washable casters

description 4˝ (102mm) dia., set of 4 (2 swivel, 2 w/brake) 4˝ (102mm) dia., set of 6 (3 swivel, 3 w/brake) 5˝ (127mm) dia., set of 4 (2 swivel, 2 w/brake) 5˝ (127mm) dia., set of 6 (3 swivel, 3 w/brake)

Zinc with Poly Tread

Zinc with Resilient Tread wt. cap. per caster lbs. kg model # 115 52.2 CA4-SB 115 52.2 CA6-SB 200 90.7 CAH4-SB 200 90.7 CAH6-SB

list per set 367 549 487 729

wt. cap. per caster lbs. kg n/a n/a 250 250

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

n/a n/a 113.4 113.4

model # n/a n/a CAHP4-SB CAHP6-SB

Polymer Cart Washable with Polymer Tread list per set n/a n/a 421 632

wt. cap. per caster lbs. kg n/a n/a 250 250

n/a n/a 113.4 113.4

model # n/a n/a CAHW4-SB CAHW6-SB

list per set n/a n/a 523 785

119


TABLES Catalog Section 10

Knock Down Worktables with Cabinet Kit see spec sheet

EG10.36

(Patent #5,165,349)

FEATURES:

• Type 430 stainless steel tabletop and side panels. • Tabletop is 30˝ (762mm) with 41⁄2˝ (114mm) high backsplash. • Stainless steel side panels and front doors with open rear. • Easy assembly via machine screws and threaded inserts. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Patented Patent # 6,981,751

…with Hinged Doors length cubic weight in. mm feet lbs. kg model # 36˝ 914 4.4 52 23.6 T3036BA-BS-HGD 30˝ width 48˝ 1219 5.4 66 29.9 T3048BA-BS-HGD (914mm) 60˝ 1524 7.1 79 35.8 T3060BA-BS-HGD

list 1466 1565 1678

…with Sliding Doors model # T3036BA-BS-SLD T3048BA-BS-SLD T3060BA-BS-SLD

Filler Tables see spec sheet

EG10.51 FEATURES:

list 1613 1723 1844

• Standard flanged feet adds stability. • 11⁄2˝ (38mm) upturn • Stainless steel legs crossbraced front-to-back and side-to-side. Note:

(Patent #5,165,349)

Filler tables are not designed to stand alone or to hold heavy equipment loads. Application and safe installation are the responsibility of the end user.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order) ®

Deluxe

SPEC-MASTER

16 gauge type 304 stainless steel top.

14 gauge type 304 stainless steel top.

length cubic weight * in. mm feet lbs. kg model # 12˝ 305 2.9 30 13.6 UT2412STEB 24˝ width 15˝ 381 2.9 34 15.4 UT2415STEB (610mm) 18˝ 457 2.9 36 16.3 UT2418STEB • 12˝ 305 2.9 34 15.4 UT3012STEB 30˝ width 15˝ 381 2.9 36 16.3 UT3015STEB • (762mm) 18˝ 457 2.9 40 18.1 UT3018STEB • 12˝ 305 3.5 37 16.8 UT3612STEB 36˝ width 15˝ 381 3.5 40 18.1 UT3615STEB (914mm) 18˝ 457 3.5 45 20.4 UT3618STEB

list 723 740 773 781 798 842 832 857 891

model # UT2412STE UT2415STE UT2418STE UT3012STE UT3015STE UT3018STE UT3612STE UT3615STE UT3618STE

list 853 853 853 1058 1058 1058 1292 1292 1292

* Add 10% weight for SPEC-MASTER®.

Worktable Stabilizer Bars (pair) see spec sheet

EG10.59 FEATURES:

• Fits standard 30˝ and 36˝ width worktables. • Heavy 12 gauge steel angle and gussets. • Valu-Master® epoxy coated. Freight class is 70.0.

model # WTSA30

120

list 162

(•) MTS (made to stock) / ( ) MTO (made to order) Note:

Cannot fit Griddle/Equipment Stands (page 131).

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


TABLES Catalog Section 10 • • • • • •

SPEC-MASTER® Enclosed Worktables with Flat Top see spec sheet

EG10.30

FEATURES:

All-welded cabinet. Top mechanically polished to satin finish. Sound-deadened between top and frame. 15⁄8˝ (42mm) diameter type 304 stainless legs. 1˝ (25mm) adjustable feet. 11⁄2˝ (38mm) sanitary rolled rim on front and back with square edge on ends for flush fit.

Note: Full length fixed center shelf available. To order NEW full width, add 20% to list price and suffix “-FCS”. To order two-thirds width, add 20% to list price and suffix “-CS”. Example: OB2436SE-CS. Door lock also available. For enhanced utility, add overshelves from page 138. (Patent #5,165,349)

To order table with 4˝ (102mm) casters, add suffix “-CA” and add to list price $367(for tables with four legs) or $549 (for tables with six legs). Example: OB2436SE-CA. To order table with 5˝ (127mm) casters, add suffix “-CAH” and add to list price $487 (for tables with four legs) or $729 (for tables with six legs). Example: OB2436SE-CAH. NSF sprayed-on latex sound deadening available. To order, add $596 to list price and suffix “-SD”. Example: OB2436SE-SD.

Freight class is 125.0. (•) MTS (made to stock) / ( ) MTO (made to order)

with Open Front length in. mm

24˝ width (610mm)

30˝ width (762mm)

36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 120˝ 36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 120˝

cu weight ft lbs. kg

914 36 132 59.9 1219 49 160 72.6 1524 63 200 90.7 1829 72 240 108.9 2134 83 281 127.5 2438 95 322 146.1 3048 105 366 166.0 914 36 136 61.7 1219 49 166 75.3 1524 63 199 90.3 1829 72 248 112.5 2134 83 294 133.4 2438 95 340 154.2 3048 105 432 196.0

model # OB2436SE OB2448SE OB2460SE OB2472SE OB2484SE OB2496SE OB24120SE OB3036SE OB3048SE OB3060SE OB3072SE OB3084SE OB3096SE OB30120SE

with Sliding Doors* list 2177 2260 2418 2577 2804 2947 3493 2298 2378 2557 2738 2926 3229 3714

weight lbs. kg model # 138 62.6 CB2436SE 170 77.1 CB2448SE 212 96.2 CB2460SE 254 115.2 CB2472SE 299 135.6 CB2484SE ** 339 153.8 CB2496SE ** 384 174.2 CB24120SE ** 142 64.4 CB3036SE 173 78.5 CB3048SE • 219 99.3 CB3060SE • 261 118.4 CB3072SE • 312 141.5 CB3084SE ** 350 158.8 CB3096SE ** 450 204.1 CB30120SE **

with Hinged Doors* weight list lbs. kg 2778 138 62.6 3107 170 77.1 3339 212 96.2 3580 254 115.2 4093 299 135.6 4421 339 153.8 5108 384 174.2 2902 142 64.4 3224 173 78.5 3479 219 99.3 3738 261 118.4 4206 312 141.5 4607 350 158.8 5328 450 204.1

model # CBH2436SE CBH2448SE CBH2460SE CBH2472SE CBH2484SE ** CBH2496SE ** CBH24120SE ** CBH3036SE CBH3048SE CBH3060SE CBH3072SE CBH3084SE ** CBH3096SE ** CBH30120SE **

list 3405 3565 3801 4034 4539 4868 5552 3519 3680 3939 4195 4657 5053 5768

* 20 gauge stainless steel doors; ** Tables 84˝ (2134mm) and longer have two sets of doors.

ALSO AVAILABLE!

SPEC-MASTER® Marine Counter Edge Cabinets

To order, add 20% to list price and add “M” after “SE” in model number. Example: CB2436SEM. see spec sheet EG10.33A

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

121


TABLES Catalog Section 10

SPEC-MASTER® Enclosed Worktables with Upturn see spec sheet

EG10.31

FEATURES:

(Patent #5,165,349)

• All-welded cabinet. • Top mechanically polished to satin finish. • Top is 14 gauge type 304 stainless steel reinforced with a full length “hat” channel support. • Body is heavy gauge type 430 stainless steel. • Sound-deadened between top and frame. • 15⁄8˝ (42mm) diameter type 304 stainless legs. • 1˝ (25mm) adjustable feet. • 11⁄2˝ (38mm) sanitary rolled rim on front, and rear, and square edge on ends for flush fit. Note: Full length fixed center shelf available. To order NEW full width, add 20% to list price and suffix “-FCS”. To order two-thirds width, add 20% to list price and suffix “-CS”. Example: UOB2436SE-CS. Door lock also available. For enhanced utility, add overshelves from page 138. To order table with 4˝ (102mm) casters, add suffix “-CA” and add to list price $367 (for tables with four legs) or $549 (for tables with six legs). Example: UOB3036SE-CA. To order table with 5˝ (127mm) casters, add suffix “-CAH” and add to list price $487 (for tables with four legs) or $729 (for tables with six legs). Example: UOB3036SE-CAH. NSF sprayed-on latex sound deadening available. To order, add $596 to list price and suffix “-SD”. Example: UOB3036SE-SD.

Freight class is 125.0. (•) MTS (made to stock) / ( ) MTO (made to order)

with Open Front length cu weight in. mm ft lbs. kg

model # UOB2436SE UOB2448SE UOB2460SE UOB2472SE UOB2484SE UOB2496SE UOB24120SE UOB3036SE UOB3048SE UOB3060SE UOB3072SE UOB3084SE UOB3096SE UOB30120SE

with Sliding Doors* list 2177 2260 2418 2577 2804 2947 3493 2298 2378 2557 2735 2926 3229 3714

weight lbs. kg model # 138 62.6 UCB2436SE 170 77.1 UCB2448SE 212 96.2 UCB2460SE 254 115.2 UCB2472SE 299 135.6 UCB2484SE ** 339 153.8 UCB2496SE ** 384 174.2 UCB24120SE ** 142 64.4 UCB3036SE 173 78.5 UCB3048SE 219 99.3 UCB3060SE 261 118.4 UCB3072SE 312 141.5 UCB3084SE ** 350 158.8 UCB3096SE ** 450 204.1 UCB30120SE **

36˝ 914 36 132 59.9 48˝ 1219 49 160 72.6 24˝ 60˝ 1524 63 200 90.7 width 72˝ 1829 72 240 108.9 (610mm) 84˝ 2134 83 281 127.5 96˝ 2438 95 322 146.1 120˝ 3048 105 366 166.0 36˝ 914 36 136 61.7 48˝ 1219 49 166 75.3 30˝ 60˝ 1524 63 199 90.3 width 72˝ 1829 72 248 112.5 (762mm) 84˝ 2134 83 294 133.4 96˝ 2438 95 340 154.2 120˝ 3048 105 432 196.0 * 20 gauge stainless steel doors; ** Tables 84˝ (2134mm) and longer have two sets of doors.

with Hinged Doors* weight list lbs. kg 2778 138 62.6 3107 170 77.1 3339 212 96.2 3580 254 115.2 4093 299 135.6 4421 339 153.8 5108 384 174.2 2902 142 64.4 3224 173 78.5 3479 219 99.3 3738 261 118.4 4206 312 141.5 4607 350 158.8 5328 450 204.1

SPEC-MASTER® Marine Counter Edge Cabinets

model # UCBH2436SE UCBH2448SE UCBH2460SE UCBH2472SE UCBH2484SE ** UCBH2496SE ** UCBH24120SE ** UCBH3036SE UCBH3048SE UCBH3060SE UCBH3072SE UCBH3084SE ** UCBH3096SE ** UCBH30120SE **

ALSO AVAILABLE!

To order, add 20% to list price and add “M” after “SE” in model number. Example: UOB2436SEM. see spec sheet EG10.33B

122

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

list 3405 3565 3801 4034 4539 4868 5552 3519 3680 3939 4195 4657 5053 5768


TABLES Catalog Section 10

SPEC-MASTER® Enclosed Worktables with Backsplash see spec sheet

EG10.32

FEATURES:

(Patent #5,165,349)

• All-welded cabinet. • Top mechanically polished to satin finish. • Top is 14 gauge type 304 stainless steel reinforced with a full length “hat” channel support. • Body is heavy gauge type 430 stainless steel. • Sound-deadened between top and frame. • 15⁄8˝ (42mm) diameter type 304 stainless legs. • 1˝ (25mm) adjustable stainless steel feet. • 11⁄2˝ (38mm) sanitary rolled rim on front, 41⁄2˝ (114mm) backsplash on rear, and square edge on ends for flush fit. Note: Full length fixed center shelf available. To order NEW full width, add 20% to list price and suffix “-FCS”. To order two-thirds width, add 20% to list price and suffix “-CS”. Example: OB2436SE-BS-CS. Door lock also available. For enhanced utility, add overshelves from page 138. To order table with 4˝ (102mm) casters, add suffix “-CA” and add to list price $367 (for tables with four legs) or $549(for tables with six legs). Example: OB3036SE-BS-CA. To order table with 5˝ (127mm) casters, add suffix “-CAH” and add to list price $487 (for tables with four legs) or $729 (for tables with six legs). Example: OB3036SE-BS-CAH. NSF sprayed-on latex sound deadening available. To order, add $596 to list price and suffix “-SD”. Example: OB3036SE-BS-SD.

Freight class is 125.0. (•) MTS (made to stock) / ( ) MTO (made to order)

with Open Front length in. mm

cu weight ft lbs. kg model # 36 133 60.3 OB2436SE-BS 49 161 73.0 OB2448SE-BS 63 202 91.6 OB2460SE-BS 72 243 110.2 OB2472SE-BS 83 284 128.8 OB2484SE-BS 95 326 147.9 OB2496SE-BS 105 390 176.9 OB24120SE-BS 36 137 62.1 OB3036SE-BS 49 167 75.8 OB3048SE-BS 63 201 91.2 OB3060SE-BS 72 251 113.9 OB3072SE-BS 83 299 135.6 OB3084SE-BS 95 344 156.0 OB3096SE-BS 105 438 198.7 OB30120SE-BS

with Sliding Doors* list 2201 2282 2446 2614 2846 2992 3552 2393 2400 2681 2773 2964 3275 3772

weight lbs. kg

model # CB2436SE-BS CB2448SE-BS CB2460SE-BS CB2472SE-BS CB2484SE-BS ** CB2496SE-BS ** CB24120SE-BS ** CB3036SE-BS CB3048SE-BS CB3060SE-BS CB3072SE-BS CB3084SE-BS ** CB3096SE-BS ** CB30120SE-BS **

36˝ 914 139 63.1 48˝ 1219 171 77.6 60˝ 1524 214 97.1 24˝ 256 116.1 width 72˝ 1829 304 137.9 (610mm) 84˝ 2134 96˝ 2438 343 155.6 120˝ 3048 390 176.9 36˝ 914 143 64.9 48˝ 1219 174 78.9 30˝ 60˝ 1524 221 100.2 264 119.8 width 72˝ 1829 (762mm) 84˝ 2134 319 144.7 96˝ 2438 355 161.0 120˝ 3048 458 207.8 * 20 gauge stainless steel doors; ** Tables 84˝ (2134mm) and longer have two sets of doors.

with Hinged Doors* weight list lbs. kg model # 2921 139 63.1 CBH2436SE-BS 3129 171 77.6 CBH2448SE-BS 3371 214 97.1 CBH2460SE-BS 3618 256 116.1 CBH2472SE-BS 4132 304 137.9 CBH2484SE-BS ** 4465 343 155.6 CBH2496SE-BS ** 5166 390 176.9 CBH24120SE-BS ** 3017 143 64.9 CBH3036SE-BS 3245 174 78.9 CBH3048SE-BS 3513 221 100.2 CBH3060SE-BS 3773 264 119.8 CBH3072SE-BS 4247 319 144.7 CBH3084SE-BS ** 4649 355 161.0 CBH3096SE-BS ** 5385 458 207.8 CBH30120SE-BS **

list 3429 3589 3827 4071 4582 4918 5608 3543 3703 3964 4227 4700 5403 5825

ALSO AVAILABLE!

SPEC-MASTER® Marine Counter Edge Cabinets

To order, add 20% to list price and add “M” after “SE” in model number. Example: OB2436SEM-BS. see spec sheet EG10.33C 100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

123


TABLES Catalog Section 10

SPEC-MASTER® Marine Beverage Counter see spec sheet

EG10.35

• • • • • •

rolled edge detail

marine counter edge detail

• • • •

FEATURES:

All stainless steel construction. 15⁄8˝ (41mm) diameter legs. Adjustable feet. 10˝ (254mm) high backsplash. Three pairs of rack slides with end caps. 24˝ x 41⁄2˝ x 11⁄4˝ (610 x 114 x 32mm) urn trough with 11⁄2˝ (38mm) drain & louvered grate. 10˝ x 14˝ x 91⁄2˝ (254 x 356 x 241mm) sink bowl, single phase duplex receptacle (NEMA 5-20R) on opposite end of sink. Hinged doors. 30˝ (762mm) front-to-back. 341⁄2˝ (876mm) working height. 441⁄2˝ (1130mm) overall height. Freight class is 92.5.

Marine beverage counter with rolled edge

(•) MTS (made to stock) / ( ) MTO (made to order) (Patent #5,165,349)

…with Boxed Marine Edges

…with Rolled Edges length in. mm 48˝ 60˝ 72˝ 84˝ 96˝ 120˝ 144˝

1219 1524 1829 2134 2439 3048 3658

SINK ON LEFT SIDE model # list BEV3048SE-10BS/L 5175 BEV3060SE-10BS/L 5489 BEV3072SE-10BS/L 5845 BEV3084SE-10BS/L 6780 BEV3096SE-10BS/L 7104 BEV30120SE-10BS/L 10660 BEV30144SE-10BS/L 11324

SINK ON RIGHT SIDE model # list BEV3048SE-10BS/R 5175 BEV3060SE-10BS/R 5489 BEV3072SE-10BS/R 5845 BEV3084SE-10BS/R 6780 BEV3096SE-10BS/R 7104 BEV30120SE-10BS/R 10660 BEV30144SE-10BS/R 11324

SINK ON LEFT SIDE model # list BEV3048SEM-10BS/L 5445 BEV3060SEM-10BS/L 5777 BEV3072SEM-10BS/L 6149 BEV3084SEM-10BS/L 7139 BEV3096SEM-10BS/L 7476 BEV30120SEM-10BS/L 11221 BEV30144SEM-10BS/L 11919

SPEC-MASTER® Marine Prep Tables see spec sheet

EG10.34

marine counter edge detail

(Patent #5,165,349)

30˝ width (762mm)

124

length in. mm

weight lbs. kg

96˝ 108˝ 120˝ 144˝

452 480 555 591

2439 2743 3048 3658

205.0 217.7 251.8 268.1

model # SMPT3096 SMPT30108 SMPT30120 SMPT30144

list 7385 7842 8306 9227

FEATURES:

SINK ON RIGHT SIDE model # list BEV3048SEM-10BS/R 5445 BEV3060SEM-10BS/R 5777 BEV3072SEM-10BS/R 6149 BEV3084SEM-10BS/R 7139 BEV3096SEM-10BS/R 7476 BEV30120SEM-10BS/R 11221 BEV30144SEM-10BS/R 11919

• All stainless steel construction. • 14 gauge type 304 stainless steel top with marine counter edge. • 15⁄8˝ (41mm) diameter legs. • Gussets with uni-lok® design. • Adjustable flanged feet. • Heavy gauge stainless steel undershelf. • Two 24˝ x 18˝ x 12˝ (610 x 457 x 305mm) sink bowls, each with twist handle drain with overflow. • 10˝ (254mm) high backsplash with Z-clip wall-mounting bracket. • 1⁄2˝ (13mm) thick poly cutting board is 16˝ x 24˝ (406 x 610mm). • NSF-approved drawer and poly cutting board with storage slides. • 8˝ (203mm) T & S faucet. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


TABLES Catalog Section 10

SPEC-MASTER® Plate Cabinets see spec sheet

EG10.56

FEATURES:

• All-welded design. • Center shelf. • Body and center shelf are heavy gauge type 430 stainless steel. • Top is 14 gauge type 304 stainless steel. • 11⁄2˝ (38mm) sanitary rolled rim on front. • Square edge on rear and ends for flush fit. Note:

SPEC-MASTER® Plate Cabinets are for stationary use only.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

For use in modular design of chef’s counters and cook lines.

plate cabinet with open base

…with Open Base

15˝ width (381mm)

18˝ width (457mm)

length in. mm

weight lbs. kg

48˝ 60˝ 72˝ 84˝ 96˝ 120˝ 144˝ 48˝ 60˝ 72˝ 84˝ 96˝ 120˝ 144˝

135 175 215 265 305 345 425 140 180 220 270 310 350 430

1219 1524 1829 2134 2438 3048 3658 1219 1524 1829 2134 2438 3048 3658

61.2 79.5 97.5 120.2 137.0 156.5 192.9 63.5 83.9 99.8 122.5 140.6 158.8 195.1

model # PC1548SE-CS PC1560SE-CS PC1572SE-CS PC1584SE-CS PC1596SE-CS PC15120SE-CS PC15144SE-CS PC1848SE-CS PC1860SE-CS PC1872SE-CS PC1884SE-CS PC1896SE-CS PC18120SE-CS PC18144SE-CS

…with Hinged Doors list 2329 2487 2764 2883 3126 3801 4665 2484 2686 3291 3549 3801 4319 5183

weight lbs. kg 150 190 230 295 365 405 445 155 195 235 300 370 410 450

68.0 86.2 104.3 133.8 165.6 183.7 201.9 70.3 88.5 106.6 136.1 168.6 186.0 204.1

model # PCH1548SE-CS PCH1560SE-CS PCH1572SE-CS PCH1584SE-CS PCH1596SE-CS PCH15120SE-CS PCH15144SE-CS PCH1848SE-CS PCH1860SE-CS PCH1872SE-CS PCH1884SE-CS PCH1896SE-CS PCH18120SE-CS PCH18144SE-CS

SPEC-MASTER® Prep Tables see spec sheet

EG10.18

(Patent #5,165,349)

FEATURES:

30˝ width (762mm)

length in. mm

weight lbs. kg

72˝ 84˝ 96˝

150 175 212

1829 2134 2438

68.0 79.4 96.2

cubic feet model # 19.2 PT 3072 22.4 PT 3084 25.5 PT 3096

list 3123 3281 3560 3689 3920 4594 5460 3278 3481 4084 4344 4594 5115 5978

weight lbs. kg 150 190 230 295 365 405 445 155 195 235 300 370 410 450

68.0 86.2 104.3 133.8 165.6 183.7 201.9 70.3 88.5 106.6 136.1 168.6 186.0 204.1

model # PCS1548SE-CS PCS1560SE-CS PCS1572SE-CS PCS1584SE-CS PCS1596SE-CS PCS15120SE-CS PCS15144SE-CS PCS1848SE-CS PCS1860SE-CS PCS1872SE-CS PCS1884SE-CS PCS1896SE-CS PCS18120SE-CS PCS18144SE-CS

list 3089 3247 3524 3643 3885 4561 5424 3244 3446 4051 4311 4561 5079 5944

• 14 gauge, type 304 all-stainless steel construction. • Backsplash. • Deck mount gooseneck faucet. • 16˝ x 20˝ x 8˝ (406 x 508 x 203mm) deep drawn sink on the left. • 20˝ x 20˝ x 5˝ (508 x 508 x 127mm) drawer on the right. • Adjustable undershelf. • 181⁄4˝ x 201⁄4˝ (464 x 527mm) poly cutting board doubles as a sink cover. Note:

prep table — reverse model

…with Sliding Doors

For reverse model, add suffix “-R” to model number. Example: PT 3072-R.

Freight class is 70.0. list 3802 4195 4496

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

(•) MTS (made to stock) / ( ) MTO (made to order)

125


TABLES Catalog Section 10

Pizza Cut-n-Pack Tables see spec sheet

• • • •

EG10.19

FEATURES:

All stainless steel base. Laminated plastic divider panel. Full base storage. Four 4˝-diameter swivel stem caster, (two with brakes). • Variety of colors and patterns to choose from. Note:

All shipping weights are approximate.

Freight class is 92.5. (•) MTS (made to stock) / ( ) MTO (made to order)

Optional Cash Drawer for Pizza Cut-n-Pack Tables length in. mm

493⁄4˝ width (1264mm)

60˝ 72˝ 84˝

1524 1829 2134

weight lbs. kg 318 368 432

144.3 167.0 196.0

cubic feet 93.2 110.6 128.0

weight lbs. kg

model # list PIC60R * 7925 PIC72R ** 8513 PIC84R ** 9048

26

11.8

cubic feet model # 0.8 CD-1

list 974

* 60˝ (1524mm) model utilizes four casters. ** 72˝ and 84˝ (1829 and 2134mm) units utilize four casters and two center support legs.

Pizza Holding Tables see spec sheet

• • • •

EG10.20

FEATURES:

Unit designed for field wiring. Stainless steel top, undershelf, and overshelves. 12-gauge galvanized angle framing. Two chrome-plated wire racks with U.L. listed infrared food warmers built in. • Stainless steel undershelf is adjustable. • 641⁄2˝ (1638mm) total height. • Electricity is single phase. Note:

All shipping weights and cubic feet are approximate.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

21˝ width (533mm)

length in. mm

weight lbs. kg

48˝ 48˝ 48˝

135 135 135

1219 1219 1219

61.2 61.2 61.2

cubic feet model # 16.4 PIH48-120 16.4 PIH48-208 16.4 PIH48-230

electrical 120V, 5.62A, 675W 208V, 3.25A, 675W 240V, 2.82A, 675W

list 3932 3932 3932

Replacement Wire Rack for Pizza Holding Tables length mm

in. width 16˝ (406mm) 39˝

126

991

weight lbs. kg 6

2.7

cubic feet model # 0.9 WR-39

list 146

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


TABLES Catalog Section 10

Rice Cooker Tables see spec sheet

• • • • •

EG10.58

FEATURES:

Freight class is 70.0.

Accommodates most popular brand cookers including Panasonic, Sharp, Tiger, and Zojirushi!

24˝ length (610mm)

width in. mm

weight lbs. kg

32˝ 34˝

53 56

813 864

cubic feet

24.0 25.4

4.2 4.4

(•) MTS (made to stock) / ( ) MTO (made to order)

GALVANIZED LEGS & UNDERSHELF model # list T3224RCB 538 T3424RCB 542

STAINLESS STEEL LEGS & UNDERSHELF model # list T3224RCSB 800 T3424RCSB 804

Stainless Steel Lok-n-Fold™ Tables see spec sheet

16 gauge type 430 stainless steel tabletop. Edges turned down at 90˚ on all four sides. Cutout for rice cooker. Heavy duty zinc-plated gussets. 15⁄8˝ (41mm) diameter galvanized or stainless steel legs. • Adjustable high-impact plastic feet. • Either adjustable 18 gauge galvanized or stainless steel undershelves.

EG10.57

FEATURES:

• 18 gauge type 430 stainless steel top. • Folding legs constructed of heavy gauge painted mild steel. • Locking dimples, a safety mechanism, ensure legs are locked in place. • 307⁄8˝ (784mm) non-adjustable height. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

with removable undershelf

WITH OPEN BASE length in. mm

24˝ width

48˝ 60˝ (610mm) 72˝ 30˝ 48˝ width 60˝ (762mm) 72˝

1219 1524 1829 1219 1524 1829

weight capacity lbs. kg 360 450 540 450 562 675

163.3 204.1 244.9 204.1 254.9 306.2

cu ft 6.0 7.5 8.9 7.4 9.2 11.0

weight lbs. kg 44 48 52 46 50 56

20.0 21.8 23.6 20.9 22.7 25.4

model # T2448F T2460F T2472F T3048F T3060F T3072F

list 565 596 679 620 664 704

WITH GALVANIZED UNDERSHELF weight lbs. kg model # 61 27.7 T2448F-US 65 29.5 T2460F-US 70 31.8 T2472F-US 63 28.6 T3048F-US 69 31.3 T3060F-US 75 34.0 T3072F-US

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

list 681 735 780 700 756 805

WITH STAINLESS STEEL UNDERSHELF weight lbs. kg model # 61 27.7 T2448F-USS 65 29.5 T2460F-USS 70 31.8 T2472F-USS 63 28.6 T3048F-USS 69 31.3 T3060F-USS 75 34.0 T3072F-USS

list 739 803 862 754 817 879

127


TABLES Catalog Section 10

adjusTable® Work Surface Systems see spec sheet

EG10.09

CUSTOM:

• Unit can be further expanded and customized by adding optional shelving accessories (see pages 48-55). • Also, wire shelves with zinc or epoxy finishes (see page 7) or solid shelves (see page 13) can be used as undershelves or overshelves. • Optional drawers available (see pages 140-143). Note:

basic unit

For Post Clamps for 1-tier and 2-tier unit see page 47. For Keyboard stations see page 47.

1-tier unit

Freight class is 70.0.

2-tier unit

(•) MTS (made to stock) / ( ) MTO (made to order)

Additional wire undershelves, solid stainless steel undershelves, chrome wire overshelves, or solid stainless steel overshelves make the possibilities almost unlimited.

Patented QuadTruss® Design (Patent #5,390,803)

makes shelves up to 25% stronger and provides a retaining ledge for increased strength and product retention.

Basic Units

24˝ width (610mm)

30˝ width (762mm)

length in. mm

cu ft

weight lbs. kg

36˝ 48˝ 60˝ 36˝ 48˝ 60˝

914 1219 1524 914 1219 1524

4.5 5.7 7.1 4.5 5.7 7.1

65 81 99 75 94 115

length in. mm

cu ft

weight lbs. kg

36˝ 48˝ 60˝ 36˝ 48˝ 60˝

914 1219 1524 914 1219 1524

4.5 5.7 7.1 4.5 5.7 7.1

73 91 113 83 104 129

length in. mm

cu ft

weight lbs. kg

36˝ 48˝ 60˝ 36˝ 48˝ 60˝

4.5 5.7 7.1 4.5 5.7 7.1

81 101 127 91 114 143

29.5 36.7 44.9 34.0 42.6 52.2

16/304 model # list T2436EBW 767 T2448EBW 834 T2460EBW 976 T3036EBW 851 T3048EBW 959 T3060EBW 1111

14/304 model # T2436EW T2448EW T2460EW T3036EW T3048EW T3060EW

list 841 966 1111 953 1094 1264

CONSISTS OF: • Stainless steel table top/work surface with hat channel supports. • Four 33˝ (838mm) chrome posts. • Two chrome wire undershelves.*

1-tier Units

24˝ width (610mm)

30˝ width (762mm)

33.1 41.3 51.3 37.6 47.2 58.5

16/304 model # T2436EBW-1 T2448EBW-1 T2460EBW-1 T3036EBW-1 T3048EBW-1 T3060EBW-1

list 955 1071 1209 1038 1165 1323

14/304 model # T2436EW-1 T2448EW-1 T2460EW-1 T3036EW-1 T3048EW-1 T3060EW-1

list 1028 1171 1323 1144 1295 1479

CONSISTS OF: • Stainless steel table top/work surface with hat channel supports. • Two 54˝ (1372mm) rear chrome posts. • Two 33˝ (838mm) front chrome posts. • Two 21˝ (533mm) front chrome posts for overshelf. • One 14˝ (356mm) wide chrome wire overshelf. • Two chrome wire undershelves.*

list 1122 1282 1444 1236 1411 1601

CONSISTS OF: • Stainless steel table top/work surface with hat channel supports. • Two 63˝ (1600mm) rear chrome posts. • Two 33˝ (838mm) front chrome posts. • Two 29˝ (737mm) front chrome posts for overshelves. • Two 14˝ (356mm) wide chrome wire overshelves. • Two chrome wire undershelves.*

2-tier Units

24˝ width (610mm)

30˝ width (762mm)

914 1219 1524 914 1219 1524

36.7 45.8 57.6 41.3 51.7 64.9

16/304 model # T2436EBW-2 T2448EBW-2 T2460EBW-2 T3036EBW-2 T3048EBW-2 T3060EBW-2

list 1048 1181 1329 1129 1274 1443

14/304 model # T2436EW-2 T2448EW-2 T2460EW-2 T3036EW-2 T3048EW-2 T3060EW-2

* 18˝ (457mm) wide undershelves used for 24˝ (610mm) wide tables; 24˝ (610mm) wide undershelves used for 30˝ (762mm) wide tables.

128

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


TABLES Catalog Section 10

Mixer Stands see spec sheet EG10.26A FEATURES:

WEIGHT CAPACITY

• Highly polished 16 gauge, type 304 stainless steel flat top. • Adjustable undershelf or adjustable crossbracing. • 24˝ (610mm) working height. • 600 lb. (272.2 kg) weight capacity of top. • 150 lb. (68.0 kg) weight capacity of undershelf. - evenly distributed static load. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

(Patent #5,165,349)

…with Undershelf length mm

width in. 24˝ (610mm) 24˝ 30˝ (762mm) 36˝ (914mm)

24˝ 30˝ 36˝ 36˝

610 610 762 914 914

weight lbs. kg 42 47 49 51 53

19.1 21.3 22.2 23.1 24.0

cubic galvanized legs stainless steel legs feet model # list model # list 3.5 MS2424 • 775 MS2424S 942 3.8 MS3024 • 808 MS3024S 987 3.8 MS3030 • 900 MS3030S 1120 4.0 MS3036 • 924 MS3036S 1139 4.2 MS3636 969 MS3636S 1192

…with Tubular Base galvanized legs stainless steel legs model # list model # list TMS2424 775 TMS2424S 942 TMS3024 808 TMS3024S 987 TMS3030 900 TMS3030S 1120 TMS3036 924 TMS3036S 1139 TMS3636 969 TMS3636S 1192

Optional Utensil Rack for Mixer Stands

Go Green. Go Eagle.

• Stainless steel. • 54˝ (1371mm) height. weight cubic lbs. kg feet model # 23 10.4 5.3 UR-501

Look for the tag on the bar code.

add to unit list 629

mixer stand with undershelf and optional utensil rack

Optional Casters for Mixer Stands

description

wt. cap. per caster lbs. kg

4˝ (102mm) dia., set of four (two swivel, two w/brake) 4˝ (102mm) dia., set of six (three swivel, three w/brake) 5˝ (127mm) dia., set of four (two swivel, two w/brake) 5˝ (127mm) dia., set of six (three swivel, three w/brake)

115 115 200 200

52.2 52.2 90.7 90.7

model # CA4-SB CA6-SB CAH4-SB CAH6-SB

list 367 549 487 729 caster

caster with brake

The Benefits of Broadline Manufacturing from EAGLE.

Call Your EAGLE GROUP Representative Now To Place Your Order. 100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

129


TABLES Catalog Section 10 • 34˝ (864mm) working height. • 14 gauge type 304 stainless steel top with no-drip marine counter edge. • Stainless steel crossbracing on three sides. • Four 4˝ (102mm) casters (two with brakes). • Pan rack slide holds six 18˝ x 26˝ (457 x 660mm) pans. • 400 lb. (181.4 kg) total weight capacity (top and slides) - evenly distributed static load. FEATURES:

Mobile Mixer Stands see spec sheet EG10.26B

(Patent #5,165,349)

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

length in. mm

30˝ width (762mm)

30˝ 36˝

weight cubic galvanized lbs. kg feet model # list 55 24.9 3.8 MMT3030G 1982 60 27.2 4.1 MMT3036G 2027

762 914

Mobile Equipment Stand see spec sheet EG10.26B FEATURES:

stainless steel model # list MMT3030S • 2212 MMT3036S 2277

• Top is 14 gauge type 304 stainless steel with no-drip marine counter edge. • Stainless steel undershelf. • Two 4˝ (102mm) casters with brake. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

(Patent #5,165,349)

length mm

in. width 24˝ (610mm) 30˝

762

weight lbs. kg 47

SPEC-MASTER® Demo Tables see spec sheet

EG10.17 FEATURES:

21.3

cubic feet 3.8

model # list MET2430S • 1729

• For instructional/educational applications. • Stainless steel construction. • Tilting frame with acrylic mirror. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Demo Tables • Tabletop with marine counter edge. Standard undershelf. table size width x length in. mm 36˝ x 60˝ 36˝ x 72˝

mirror size width x length in. mm

914 x 1524 914 x 1829

241⁄4˝ x 491⁄2˝ 241⁄4˝ x 611⁄2˝

616 x 1257 616 x 1562

weight lbs. kg

cubic feet

250 275

7.0 10.0

113.4 124.7

model # DT3660SE DT3672SE

list 6311 7429

Ceiling Mounted Demo Mirrors • Specify post length when ordering. mirror size width x length* in. mm (Patent #5,165,349)

130

241⁄4˝ x 491⁄2˝ 616 x 1257 241⁄4˝ x 611⁄2˝ 616 x 1562 * Excludes posts.

weight lbs. kg 90 115

40.8 52.2

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

cubic feet 3.6 4.5

model # CMM49 CMM61

list 3632 4261


TABLES Catalog Section 10

Griddle / Equipment Stands see spec sheet

EG10.27 FEATURES:

• Highly polished 16 gauge, type 304 stainless steel flat top. • 11⁄4˝ (32mm) upturn on sides and rear. • Units 72˝ (1829mm) and longer have six legs. Note:

All shipping weights are approximate. Units designed for light and medium duty cooking equipment only. Heavy equipment usage should be reviewed with factory.

(Patent #5,165,349)

Griddle/Equipment Stands cannot accept optional Worktable Stabilizer Bars (page 120).

Freight class is 70.0. griddle/equipment stand with optional hardwood cutting board

table top length in. mm

243⁄8˝ width (619mm)

303⁄8˝ width (772mm)

243⁄8˝ 363⁄8˝ 483⁄8˝ 603⁄8˝ 723⁄8˝ 843⁄8˝ 963⁄8˝ 243⁄8˝ 363⁄8˝ 483⁄8˝ 603⁄8˝ 723⁄8˝ 843⁄8˝ 963⁄8˝

619 924 1229 1534 1838 2143 2448 619 924 1229 1534 1838 2143 2448

# of legs 4 4 4 4 6 6 6 4 4 4 4 6 6 6

(•) MTS (made to stock) / ( ) MTO (made to order)

adjustable undershelf welded gusset

NOW

STANDARD!

weight lbs. kg

cu ft

weight cap. with bullet feet lbs. kg

weight cap. with optional casters lbs. kg

48 54 62 74 86 99 120 48 55 71 83 96 112 125

106 119 136 163 189 218 264 106 121 156 183 211 246 275

320 480 640 800 960 1120 1280 400 600 800 1000 1200 1400 1600

180 270 360 450 540 630 720 225 338 450 563 675 788 900

21.8 24.5 28.1 33.6 39.0 44.9 54.4 21.8 24.9 32.2 37.6 43.6 50.8 56.7

• 1 ⁄4˝ (32mm) thick. • 1˝ (25mm) diameter stainless steel tubular supports integrally welded to adjustable stainless steel sleeve assembly. 1

8˝ width (203mm)

weight lbs. kg

24˝ 36˝ 48˝ 60˝ 72˝ 84˝ 96˝

12 16 21 26 31 39 46

610 914 1219 1524 1829 2134 2438

5.4 7.3 9.5 11.8 14.1 17.6 20.9

81.6 122.5 163.3 204.1 244.9 285.8 326.6 102.1 153.3 204.1 255.4 306.2 357.4 408.2

stainless steel legs and undershelf model # list T2424SGS 1011 T2436SGS 1118 T2448SGS 1226 T2460SGS 1337 T2472SGS 1446 T2484SGS 1803 T2496SGS 1843 T3024SGS 1054 T3036SGS 1183 T3048SGS 1314 T3060SGS • 1448 T3072SGS 1581 T3084SGS 2421 T3096SGS 2462

Optional Plate Shelf for Griddle/Equipment Stands

Optional Hardwood Cutting Board for Griddle/Equipment Stands

length in. mm

145.1 217.7 290.3 362.9 435.5 508.0 580.6 181.4 272.2 362.9 453.6 544.3 635.0 725.8

galvanized legs and undershelf model # list T2424GS 883 T2436GS • 975 T2448GS 1096 T2460GS 1158 T2472GS 1251 T2484GS 1529 T2496GS 1569 T3024GS 903 T3036GS • 1013 T3048GS • 1123 T3060GS • 1236 T3072GS • 1347 T3084GS 2102 T3096GS 2143

cubic feet 0.6 0.9 1.4 1.8 2.1 2.5 2.9

model # 313970 307105 • 307106 • 307107 • 307108 • 307109 307110

list 398 448 501 557 612 718 821

• Heavy gauge stainless steel. • Adjustable height. • Must be ordered in conjunction with hardwood cutting board. length in. mm

8˝ width (203mm)

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

24˝ 36˝ 48˝ 60˝ 72˝ 84˝ 96˝

610 914 1219 1524 1829 2134 2438

weight lbs. kg 5 6 7 11 13 16 20

2.3 2.7 3.2 5.0 5.8 7.3 9.0

cubic feet 1.2 1.4 1.6 1.9 2.2 2.5 2.8

model # APS2 APS3 APS4 APS5 APS6 APS7 APS8

list 388 439 483 535 584 729 845

131


TABLES Catalog Section 10

All Poly Top Tables • 1⁄2˝ (13mm) thick poly top. • 15⁄8˝ (41mm) type 304 stainless steel legs welded to tabletop frame. • Adjustable stainless steel crossbracing. • Adjustable metal feet. FEATURES: • Units shipped assembled and crated.

Cutting Tables see spec sheet

EG10.16

Note: All-welded construction available. To order, add $342 to list price and suffix “-AW”. Example: CT2436S-AW. Undershelf available. Fits over adjustable crossbracing. To order, add 15% to list price and suffix “-US”. Example: CT2436S-US. Richlite® heat-resistant brown tabletops available. Resists up to 360˚F. To order, add suffix “-RL” to model number (example: CT2436S-RL) and call factory for pricing.

…with 41⁄2˝ (114mm) Removable Backsplash

…with Flat Top

24˝ width (610mm)

30˝ width (762mm)

length in. mm

weight lbs. kg

cubic feet

36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝ 36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝

110 120 150 176 196 215 225 243 115 130 157 178 198 220 230 255

20.9 27.4 34.0 40.6 47.2 53.8 60.4 67.0 25.7 33.8 41.9 50.0 58.1 66.2 74.4 82.5

914 1219 1524 1829 2134 2438 2743 3048 914 1219 1524 1829 2134 2438 2743 3048

49.9 54.4 68.0 79.8 88.9 97.5 102.1 110.2 52.2 59.0 71.2 80.3 89.8 99.8 104.3 115.7

model # CT2436S CT2448S CT2460S CT2472S CT2484S CT2496S CT24108S CT24120S CT3036S CT3048S CT3060S CT3072S CT3084S CT3096S CT30108S CT30120S

list 1173 1301 1417 1895 2111 2327 2456 2655 1249 1388 1518 2006 2307 2414 2591 2725

Chopping Tables see spec sheet

Freight class is 250.0. (•) MTS (made to stock) / ( ) MTO (made to order)

weight cubic lbs. kg feet model # 110 49.9 23.2 CT2436S-BS 120 54.4 30.5 CT2448S-BS 150 68.0 37.8 CT2460S-BS 180 81.6 45.1 CT2472S-BS 198 89.8 52.4 CT2484S-BS 217 98.4 59.7 CT2496S-BS 230 104.3 67.0 CT24108S-BS 250 113.4 74.3 CT24120S-BS 118 53.5 28.7 CT3036S-BS 135 61.2 37.5 CT3048S-BS 160 72.6 46.5 CT3060S-BS 181 82.1 55.5 CT3072S-BS 205 93.0 64.5 CT3084S-BS 228 103.4 73.5 CT3096S-BS 235 106.6 82.5 CT30108S-BS 260 117.9 91.5 CT30120S-BS

list 1181 1314 1435 1911 2189 2386 2526 2676 1263 1404 1534 2040 2387 2564 2689 2754

• Two layers of 1⁄2˝ (13mm) thick removable poly top, 1˝ (25mm) total thickness. • Adjustable stainless steel crossbracing. • 15⁄8˝ (41mm) type 304 stainless steel legs welded to tabletop frame. • Adjustable metal feet. FEATURES: • Units shipped assembled and crated.

EG10.11

Note: All-welded construction available. To order, add $342 to price list and suffix “-AW”. Example: CHT2436S-AW.

24˝ width (610mm)

30˝ width (762mm)

132

length in. mm

weight lbs. kg

24˝ 30˝ 36˝ 48˝ 30˝ 36˝ 48˝

110 118 126 142 126 134 150

610 762 914 1219 762 914 1219

49.9 53.5 57.2 64.4 57.2 60.8 68.0

cubic feet model # 14.3 CHT2424S 17.6 CHT2430S 20.9 CHT2436S 27.5 CHT2448S 21.6 CHT3030S 25.7 CHT3036S 33.8 CHT3048S

list 1301 1394 1512 1682 1476 1638 1854

Undershelf available. Fits over adjustable crossbracing. To order, add 15% to list price and suffix “-US”. Example: CHT2436S-US. Richlite® heat-resistant brown tabletops available.Resists up to 360˚F. To order, add suffix “-RL” to model number (example: CT2436S-RL) and call factory for pricing. For optional casters, see page 118.

Freight class is 250.0. (•) MTS (made to stock) / ( ) MTO (made to order)

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


TABLES Catalog Section 10

Trimming Tables see spec sheet

30˝ width (762mm)

36˝ width (914mm)

length in. mm

weight lbs. kg

36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝ 36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝

120 142 164 188 210 232 254 266 126 148 170 192 214 236 258 280

914 1219 1524 1829 2134 2438 2743 3048 914 1219 1524 1829 2134 2438 2743 3048

54.4 64.4 74.4 85.3 95.3 105.2 115.2 120.7 57.2 67.1 77.1 87.1 97.1 107.0 117.0 127.0

EG10.15

# of bds cubic per table feet model # 1 28.5 TB3036S 2 37.5 TB3048S 2 46.5 TB3060S 3 55.5 TB3072S 3 64.5 TB3084S 4 73.5 TB3096S 4 82.5 TB30108S 4 91.5 TB30120S 1 33.8 TB3636S 2 44.5 TB3648S 2 55.2 TB3660S 3 65.9 TB3672S 3 76.6 TB3684S 4 87.3 TB3696S 4 98.0 TB36108S 4 108.7 TB36120S

Boat Racks for Poly Top Tables see spec sheet

EG10.22

• 4˝ high (102mm) type 304 stainless steel removable backsplash. • 12˝ (152mm) removable type 304 stainless steel deck. • 1⁄2˝ (13mm) thick removable poly top. • 15⁄8˝ (41mm) diameter 16 gauge type 304 stainless steel legs welded to tabletop frame. • Adjustable 16 gauge type 304 stainless steel crossbracing. • Adjustable metal feet. • 4˝ or 5˝ (102 or 127mm) diameter casters. FEATURES: Tables 84˝ (2134mm) and longer require a set of six casters. • Units shipped assembled and crated. list 1880 2142 2576 2928 3219 3789 4152 4392 2009 2546 3016 3382 3767 4286 4708 5315

Note: All-welded construction available. To order, add $342 to price list and suffix “-AW”. Example: TB3036S-AW. Undershelf available. Fits over adjustable crossbracing. To order, add 15% to list price and suffix “-US”. Example: TB3036S-US. Richlite® heat-resistant brown tabletops available. Resists up to 360˚F. To order, add suffix “-RL” to model number (example: TB3036S-RL) and call factory for pricing. For optional casters, see page 118.

Freight class is 250.0. (•) MTS (made to stock) / ( ) MTO (made to order)

• Used in conjunction with poly top tables. • Table mounted attaches easily to poly top tables of the same length. • Chrome wire shelves and posts. FEATURES: • 26˝ (660mm) rods. Note: All shipping weights and cubic feet are approximate.

(Patent #5,390,803)

table mounted boat rack ceiling mounted boat rack

On Table-Mounted Racks, 48˝-72˝ lengths include two posts, one 3-sided truss frame, and one shelf. 84˝-96˝ lengths include four posts, two 3-sided truss frames, and two shelves. On Wall-Mounted Racks, 48˝-72˝ lengths include two posts, four shelf brackets, and two shelves. 84˝-96˝ lengths include three posts, six shelf brackets, and four shelves. On Ceiling-Mounted Racks, 48˝-72˝ lengths include four posts and two shelves. 84˝-96˝ lengths include six posts and four shelves.

wall mounted boat rack

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

14˝ width (356mm)

length in. mm

cu ft

48˝ 60˝ 72˝ 84˝ 96˝

2.6 3.3 4.0 4.6 5.3

1219 1524 1829 2134 2438

Table Mounted weight lbs. kg model # 45 20.4 BRT4 55 24.9 BRT5 65 29.5 BRT6 75 34.0 BRT7 85 38.6 BRT8

list 545 617 628 833 835

Wall Mounted weight lbs. kg model # 40 18.1 BRW4 50 22.7 BRW5 60 27.2 BRW6 78 35.4 BRW7 80 36.3 BRW8

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

list 525 595 607 797 802

Ceiling Mounted weight lbs. kg model # 40 18.1 BRC4 50 22.7 BRC5 60 27.2 BRC6 78 35.4 BRC7 80 36.3 BRC8

list 535 607 621 809 818

133


TABLES Catalog Section 10 • • • •

Poly Top Boning Tables see spec sheet

EG10.07

• • •

FEATURES: •

4˝ (102mm) removable backsplash. 6˝ (152mm) removable stainless steel deck. 1 ⁄2˝ (13mm) thick removable poly top. 15⁄8˝ (41mm) diameter 16 gauge stainless steel legs welded to tabletop frame. Adjustable 16 gauge stainless steel crossbracing. Adjustable metal feet. 4˝ or 5˝ (102 or 127mm) diameter casters. Tables 84˝ (2134mm) and longer require a set of six casters. Units shipped assembled and crated.

Note: All-welded construction available. To order, add $360 to price list and suffix “-AW”. Example: BT2436S-AW.

24˝ width (610mm)

30˝ width (762mm)

36˝ width (914mm)

length in. mm

weight lbs. kg

36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝ 36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝ 36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝

110 132 135 160 180 215 225 245 115 138 140 165 185 220 230 250 120 143 145 170 190 225 235 255

914 1219 1524 1829 2134 2438 2743 3048 914 1219 1524 1829 2134 2438 2743 3048 914 1219 1524 1829 2134 2438 2743 3048

49.9 59.9 61.2 72.6 81.6 97.5 102.1 111.1 52.2 62.6 63.5 74.8 83.9 99.8 104.3 113.4 54.4 64.9 65.8 77.1 86.2 102.1 106.6 115.7

cubic feet model # 23.2 BT2436S 30.5 BT2448S 37.8 BT2460S 45.1 BT2472S 52.4 BT2484S 59.7 BT2496S 67.0 BT24108S 74.3 BT24120S 28.7 BT3036S 37.5 BT3048S 46.5 BT3060S 55.5 BT3072S 64.5 BT3084S 73.5 BT3096S 82.5 BT30108S 91.5 BT30120S 33.8 BT3636S 44.5 BT3648S 55.2 BT3660S 65.9 BT3672S 76.6 BT3684S 87.3 BT3696S 98.0 BT36108S 108.7 BT36120S

Undershelf available. Fits over adjustable crossbracing. To order, add 15% to list price and suffix “-US”. Example: BT2436S-US.

list 1459 1759 2047 2375 2707 3055 3301 3511 1723 1938 2321 2620 2861 3374 3686 3874 1854 2339 2762 3075 3409 3877 4244 4800

Richlite® heat-resistant brown tabletops available.Resists up to 360˚F. To order, add suffix “-RL” to model number (example: BT2436S-RL) and call factory for pricing. For optional casters, see page 118.

Freight class is 250.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Utensil Bars see spec sheet

EG10.52

utensil bar

FEATURES:

• For stainless steel worktables (pages 106-117). • Fits onto legs under tabletop, running front-to-back. • Constructed of heavy gauge stainless steel. • 2˝ x 1⁄4˝ (51 x 7mm) bar with two stainless steel gussets. • Can add on to existing table. • Complete with six pot hooks. Note:

fits table width in. mm 24˝ 30˝, 36˝

134

610 762, 914

weight lbs. kg 5 6

2.3 2.7

cu ft 0.03 0.04

model # UB-24 UB-30

list 217 277

To order utensil bars for worktables with LIFESTOR® undershelves (page 118), add suffix “-L” to model number. Example: UB-24-L.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


TABLES Catalog Section 10 utility rack

For optional heat lamp brackets, add $187 list per pair.

post

Features: • Any table can be customized with overshelves of the same length. • System can easily be changed or expanded as needed. • Tables are caster-capable for workstation mobility. • Overshelves’ height adjustable in 1˝ (25mm) increments for flexible and accurate placement. • 10˝ and 12˝ (254 and 305mm) shelf widths can be intermixed on same posts. • Split sleeves. • Tapered collar for easy assembly. • Overshelves shipped knocked-down. • All shipping weights and cubic feet are approximate.

overshelves

utility rack mounting plate

(Patent #5,165,349)

FLEX-MASTER® Overshelf System Continued on page 136-137

Overshelves

FEATURES:

see spec sheet

EG10.08

• Priced per shelf. • 14 gauge type 304 shelves available upon request. Freight class is 70.0.

10˝ width (254mm)

12˝ width (305mm)

length in. mm

weight lbs. kg

30˝ 36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝ 132˝ 144˝ 30˝ 36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝ 132˝ 144˝

10.1 12.1 13.1 15.2 17.2 19.3 21.3 23.4 25.4 27.4 29.4 11.1 12.3 14.8 17.2 19.7 22.1 24.6 27.0 29.5 31.5 33.5

762 915 1219 1524 1829 2133 2438 2743 3048 3353 3658 762 915 1219 1524 1829 2133 2438 2743 3048 3353 3658

4.6 5.5 6.0 6.9 7.8 8.8 9.7 10.6 11.5 12.5 13.4 5.1 5.6 6.7 7.8 9.1 10.0 11.2 12.3 13.4 14.3 15.2

cubic feet 0.5 0.6 0.8 1.0 1.2 1.5 1.7 1.9 2.1 2.3 2.5 0.6 0.8 1.0 1.3 1.5 1.8 2.0 2.3 2.5 2.7 2.9

16/430 model # list ea 411030 291 411036 295 411048 318 411060 • 346 411072 • 393 411084 438 411096 • 483 411010 524 411012 565 411013 612 411014 656 411230 295 411236 • 308 411248 • 336 411260 • 360 411272 • 413 411284 460 411296 • 498 411210 554 411212 617 411213 661 411214 704

16/304 model # list ea 421030 318 421036 328 421048 361 421060 • 406 421072 453 421084 499 421096 564 421010 605 421012 644 421013 692 421014 752 421230 328 421236 366 421248 • 383 421260 • 426 421272 • 482 421284 541 421296 604 421210 649 421212 696 421213 741 421214 785

Posts see spec sheet height weight cubic chrome in. mm lbs. kg feet model # list/pair 18˝ 457 1.7 0.8 0.1 418202 • 127 30˝ 762 2.4 1.1 0.2 430202 • 139 48˝ 1219 5.6 2.5 0.2 448202 • 169

EG10.08

stainless steel model # list/pair 418002 • 147 430002 • 189 448002 • 249

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

ORDERING

(•) MTS (made to stock) / ( ) MTO (made to order)

two overshelves

two pairs of posts

• Sold in pairs. • Each pair includes mounting plate. • Order two pairs of posts for 30˝ to 72˝ (762 to 1829mm) shelves; three pairs for 84˝ to 120˝ (2134 to 3048mm) shelves; four pairs for 132˝ and 144˝ (3353 and 3658mm) shelves. Freight class is 50.0.

135


TABLES Catalog Section 10

Utility Racks

• Chrome plated.

FEATURES:

see spec sheet

EG10.08

Freight class is 50.0. (•) MTS (made to stock) / ( ) MTO (made to order)

for overshelf length in. mm

weight lbs. kg

cubic feet

30˝ 36˝ 48˝ 60˝ 72˝

1.7 1.9 2.1 2.5 2.9

0.2 0.2 0.2 0.3 0.4

762 915 1219 1524 1829

0.8 0.9 1.0 1.1 1.3

model # PRT30-C PRT36-C PRT48-C • PRT60-C • PRT72-C •

list 68 80 87 102 120

* Utility racks 84˝ to 120˝ (2133 to 3048mm) come in two pieces. **132˝ and 144˝ (3353 and 3658mm) racks come in three pieces.

for overshelf length in. mm 84˝ 96˝ 108˝ 120˝ 132˝ 144˝

2133 2438 2743 3048 3353 3658

weight cubic lbs. kg feet model # 4.1 1.9 0.4 PRT84-C * 4.9 2.2 0.4 PRT96-C * • 5.6 2.5 0.5 PRT108-C* 6.2 2.8 0.5 PRT120-C* 6.9 3.1 0.6 PRT132-C** 7.6 3.5 0.6 PRT144-C**

• Aluminum. • Designed to accommodate both 10˝ and 12˝ (254 and 305mm) wide shelves.

Mounting Plate see spec sheet EG10.08 FEATURES: model # 311915

Freight class is 70.0.

list each 22

(•) MTS (made to stock) / ( ) MTO (made to order)

Pot Hook see spec sheet EG10.08 weight cubic lbs. kg feet model # 0.2 0.1 0.1 300696

FEATURES:

list each 24

(•) MTS (made to stock) / ( ) MTO (made to order)

see spec sheet

for Budget tables* for all other tables add to list add to list 1188 1254 1248 1334 1344 1454 1464 1584

* Note: Kits for “Budget” worktables include 16 gauge type 430 shelves and stainless steel posts.

Kit B description fits 36˝ (914mm) long worktables fits 48˝ (1219mm) long worktables fits 60˝ (1524mm) long worktables fits 72˝ (1829mm) long worktables

• • • •

EG10.08

Kit A description

• Stainless steel. • Slips over utiity racks. • 21⁄4˝ (57mm) prongs. Freight class is 70.0.

FLEX-MASTER® Kits for All Stainless Steel Worktables

fits 36˝ (914mm) long worktables fits 48˝ (1219mm) long worktables fits 60˝ (1524mm) long worktables fits 72˝ (1829mm) long worktables

for Budget tables* for all other tables add to list add to list 968 1034 1014 1100 1070 1190 1164 1284

KIT A INCLUDES:

Two 12˝ (305mm) wide 16 gauge type 304 shelves. Two 30˝ (762mm) stainless steel front posts. Two 48˝ (1219mm) stainless steel rear posts. Two utility racks. To order, add suffix “-FM-PL” to model number. Example: T3060SE-FM-PL. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Tabletops are predrilled for rear mounting of posts and shelves. • Two 12˝ (305mm) wide 16 gauge type 304 shelves. • Four 30˝ (762mm) stainless steel posts. To order, add suffix “-FM” to model number. KIT B Example: T3060SE-FM. INCLUDES:

* Note: Kits for “Budget” worktables include 16 gauge type 430 shelves and stainless steel posts.

136

list 140 164 166 172 186 202

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


TABLES Catalog Section 10 • Heavy gauge stainless steel. • Back is recessed with full-length concealed mounting plate for easy installation. • Fixed center shelf. • Hinged doors provided with lift-off pin hinges. • 15˝ (381mm) width. 28˝ (711mm) overall height.

Wall Cabinets see spec sheet

EG02.07

FEATURES:

Freight class is 100.0. (•) MTS (made to stock) / ( ) MTO (made to order)

wall cabinet with hinged doors

Open Front length in. mm

wall cabinet with sliding doors

weight cubic lbs. kg feet model # 125 56.7 14.5 WCO-36 165 74.8 18.3 WCO-48 195 88.5 22.6 WCO-60 225 102.0 26.8 WCO-72 260 117.9 35.2 WCO-96

36˝ 914 48˝ 1219 60˝ 1524 72˝ 1829 96˝ 2438 * Features two pairs of doors.

Spice Bins see spec sheet

EG10.59

FEATURES:

Hinged Doors

list model # 3151 WCH-36 3629 WCH-48 3971 WCH-60 4446 WCH-72 4979 WCH-96 *

list 4642 5029 5767 6460 7237

Sliding Doors model # WCS-36 WCS-48 WCS-60 WCS-72 WCS-96 *

list 4312 4724 5463 6118 6852

• Designed for either overshelf or wall shelf applications. • 22 gauge stainless steel with fully coved deepdrawn construction, complete with label holders. • Removable bin must be allowed 73⁄4˝ (197mm) space and slides on stainless steel angle supports secured to underside of shelf. Note: Shipping weight and cubic feet are approximate.

width x length x height in. mm 6 ⁄2˝ x 5 ⁄2˝ x 6˝ 1

1

165 x 140 x 152

weight cubic lbs. kg feet model # 1.5 0.7 0.1 SB-1

list 268

Freight class is 85.0. (•) MTS (made to stock) / ( ) MTO (made to order)

The SpecFAB® Division EAGLE GROUP Catering to the custom fabrication needs of the Foodservice and Retail Display industries.

Email: quotes@eaglegrp.com Fax: 302-653-3091 in your request and our trained staff will begin planning, layout and quotation upon receipt.

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

137


TABLES Catalog Section 10

Overshelves, Non-Adjustable see spec sheet

EG10.28 FEATURES:

• Mounted on four stainless steel, 1˝ (25mm) diameter tubular base legs. • Special width shelves available. Note: Recommended that overshelves be ordered when ordering tables. Specify choice of centered or rear-mounted on table. Otherwise, table must be field-drilled for mounting overshelves.

single deck overshelf

Freight class is 70.0.

double deck overshelf

(•) MTS (made to stock) / ( ) MTO (made to order) Optional heat lamp brackets available. Standard 12˝ shorter than overshelf. To order, add suffix “-HLB” to model number (example: OS1236-16/4-HLB) and $187 per pair. Two pairs required for lengths 84˝ and over. For cantilever option, see page 338.

Single Deck Overshelves, Non-Adjustable - Shipped knocked-down. length in. mm

10˝ width (254mm)

12˝ width (305mm)

36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝ 132˝ 144˝ 36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝ 132˝ 144˝

915 1219 1524 1829 2133 2438 2743 3048 3353 3658 915 1219 1524 1829 2133 2438 2743 3048 3353 3658

# of legs 4 4 4 4 6 6 6 6 8 8 4 4 4 4 6 6 6 6 8 8

weight lbs. kg

cu ft

15 19 24 29 34 37 38 39 42 46 16 20 25 30 35 38 39 40 43 47

0.9 1.3 1.6 1.9 2.2 2.5 2.8 3.1 3.7 4.2 0.9 1.3 1.6 1.9 2.2 2.5 2.5 3.1 3.7 4.2

6.8 8.6 10.9 13.2 15.4 16.8 17.2 17.6 19.1 20.9 7.3 9.0 11.3 13.6 15.9 17.2 17.6 18.1 19.5 21.3

16 gauge, type 430 16 gauge, type 304 model # list model # list OS1036-16/4 529 OS1036-16/3 639 OS1048-16/4 563 OS1048-16/3 699 OS1060-16/4 598 OS1060-16/3 767 OS1072-16/4 639 OS1072-16/3 838 OS1084-16/4 676 OS1084-16/3 904 OS1096-16/4 826 OS1096-16/3 1077 OS10108-16/4 847 OS10108-16/3 1109 OS10120-16/4 878 OS10120-16/3 1202 OS10132-16/4 919 OS10132-16/3 1276 OS10144-16/4 953 OS10144-16/3 1341 OS1236-16/4 560 OS1236-16/3 667 OS1248-16/4 593 OS1248-16/3 732 OS1260-16/4 633 OS1260-16/3 802 OS1272-16/4 677 OS1272-16/3 878 OS1284-16/4 720 OS1284-16/3 949 OS1296-16/4 878 OS1296-16/3 1144 OS12108-16/4 933 OS12108-16/3 1228 OS12120-16/4 965 OS12120-16/3 1292 OS12132-16/4 1020 OS12132-16/3 1379 OS12144-16/4 1052 OS12144-16/3 1443

14 gauge, type 304 model # list OS1036-14/3 707 OS1048-14/3 777 OS1060-14/3 853 OS1072-14/3 929 OS1084-14/3 1004 OS1096-14/3 1197 OS10108-14/3 1228 OS10120-14/3 1339 OS10132-14/3 1419 OS10144-14/3 1491 OS1236-14/3 741 OS1248-14/3 814 OS1260-14/3 892 OS1272-14/3 976 OS1284-14/3 1056 OS1296-14/3 1273 OS12108-14/3 1368 OS12120-14/3 1435 OS12132-14/3 1535 OS12144-14/3 1602

Double Deck Overshelves, Non-Adjustable - All welded construction, shipped assembled. length in. mm

10˝ width (254mm)

12˝ width (305mm)

138

36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝ 132˝ 144˝ 36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝ 132˝ 144˝

915 1219 1524 1829 2134 2438 2743 3048 3353 3658 915 1219 1524 1829 2134 2438 2743 3048 3353 3658

# of legs 4 4 4 4 6 6 6 6 8 8 4 4 4 4 6 6 6 6 8 8

weight lbs. kg

cu ft

31 39 48 59 69 75 77 79 85 92 32 40 48 60 70 76 78 80 87 95

8.6 11.4 14.2 17.0 19.8 22.6 25.4 28.2 35.8 41.8 8.6 11.4 14.2 17.0 19.8 22.6 25.4 28.3 35.9 42.0

14.1 17.6 21.8 26.8 31.3 34.0 34.9 35.8 38.6 41.7 14.5 18.1 21.8 27.2 31.8 34.5 35.4 36.3 39.5 43.1

16 gauge, type 430 16 gauge, type 304 model # list model # list DOS1036-16/4 1038 DOS1036-16/3 1162 DOS1048-16/4 1071 DOS1048-16/3 1222 DOS1060-16/4 1151 DOS1060-16/3 1334 DOS1072-16/4 1222 DOS1072-16/3 1442 DOS1084-16/4 1294 DOS1084-16/3 1543 DOS1096-16/4 1580 DOS1096-16/3 1867 DOS10108-16/4 1692 DOS10108-16/3 2017 DOS10120-16/4 1727 DOS10120-16/3 2080 DOS10132-16/4 1841 DOS10132-16/3 2232 DOS10144-16/4 1874 DOS10144-16/3 2289 DOS1236-16/4 1097 DOS1236-16/3 1221 DOS1248-16/4 1128 DOS1248-16/3 1314 DOS1260-16/4 1216 DOS1260-16/3 1411 DOS1272-16/4 1303 DOS1272-16/3 1512 DOS1284-16/4 1386 DOS1284-16/3 1657 DOS1296-16/4 1684 DOS1296-16/3 1961 DOS12108-16/4 1823 DOS12108-16/3 2045 DOS12120-16/4 1857 DOS12120-16/3 2147 DOS12132-16/4 1993 DOS12132-16/3 2386 DOS12144-16/4 2025 DOS12144-16/3 2451

14 gauge, type 304 model # list DOS1036-14/3 1278 DOS1048-14/3 1346 DOS1060-14/3 1468 DOS1072-14/3 1584 DOS1084-14/3 1698 DOS1096-14/3 2054 DOS10108-14/3 2216 DOS10120-14/3 2287 DOS10132-14/3 2455 DOS10144-14/3 2519 DOS1236-14/3 1417 DOS1248-14/3 1521 DOS1260-14/3 1636 DOS1272-14/3 1758 DOS1284-14/3 1889 DOS1296-14/3 2092 DOS12108-14/3 2248 DOS12120-14/3 2363 DOS12132-14/3 2626 DOS12144-14/3 2695

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


TABLES Catalog Section 10

Extra Undershelves see spec sheet

EG10.59

FEATURES:

For tables with uni-lok® hat channel frame.

• For tables with uni-lok® hat channel frame. • Designed for storage of shorter, smaller items under worktable where only one undershelf might not suffice. • Available in galvanized or stainless steel. Note:

When ordering an extra or replacement undershelf, please order per the size of your tabletop. Please note the “for table size” column in chart.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

for table size * length weight in. mm lbs. kg

24˝ width (610mm)

30˝ width (762mm)

24˝ 30˝ 36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝ 132˝ 144˝ 24˝ 30˝ 36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝ 132˝ 144˝

610 762 915 1219 1524 1829 2134 2438 2743 3048 3353 3658 610 762 915 1219 1524 1829 2134 2438 2743 3048 3353 3658

15 18 21 27 33 39 45 51 57 63 69 75 17 21 24 30 36 42 48 54 60 66 72 78

6.6 8.2 9.6 12.2 15.0 17.6 20.4 23.1 25.9 28.6 31.3 34.0 7.5 9.5 10.7 13.6 16.3 19.1 21.8 24.5 27.2 29.9 32.7 35.4

cu ft 1.6 1.9 2.3 3.0 3.7 4.5 5.2 5.9 6.6 7.3 8.1 8.8 1.9 2.4 2.8 3.7 4.6 5.5 6.4 7.3 8.2 9.0 9.9 10.8

galvanized (adjustable) model # 2424GADJUS 2430GADJUS 2436GADJUS 2448GADJUS 2460GADJUS 2472GADJUS 2484GADJUS 2496GADJUS 24108GADJUS 24120GADJUS 24132GADJUS 24144GADJUS 3024GADJUS 3030GADJUS 3036GADJUS 3048GADJUS 3060GADJUS 3072GADJUS 3084GADJUS 3096GADJUS 30108GADJUS 30120GADJUS 30132GADJUS 30144GADJUS

list 163 194 198 207 213 216 218 232 241 259 289 320 169 207 209 213 218 232 239 241 275 293 315 348

stainless steel (adjustable) list model # 364 2424SADJUS-18/3 399 2430SADJUS-18/3 420 2436SADJUS-18/3 461 2448SADJUS-18/3 519 2460SADJUS-18/3 581 2472SADJUS-18/3 648 2484SADJUS-18/3 698 2496SADJUS-18/3 796 24108SADJUS-18/3 801 24120SADJUS-18/3 856 24132SADJUS-18/3 1015 24144SADJUS-18/3 425 3024SADJUS-18/3 456 3030SADJUS-18/3 483 3036SADJUS-18/3 526 3048SADJUS-18/3 602 3060SADJUS-18/3 673 3072SADJUS-18/3 746 3084SADJUS-18/3 828 3096SADJUS-18/3 915 30108SADJUS-18/3 1017 30120SADJUS-18/3 1126 30132SADJUS-18/3 1219 30144SADJUS-18/3

model # 2424SADJUS-18/4 2430SADJUS-18/4 2436SADJUS-18/4 2448SADJUS-18/4 2460SADJUS-18/4 2472SADJUS-18/4 2484SADJUS-18/4 2496SADJUS-18/4 24108SADJUS-18/4 24120SADJUS-18/4 24132SADJUS-18/4 24144SADJUS-18/4 3024SADJUS-18/4 3030SADJUS-18/4 3036SADJUS-18/4 3048SADJUS-18/4 3060SADJUS-18/4 3072SADJUS-18/4 3084SADJUS-18/4 3096SADJUS-18/4 30108SADJUS-18/4 30120SADJUS-18/4 30132SADJUS-18/4 30144SADJUS-18/4

list 400 437 459 504 566 637 707 764 863 872 932 1100 463 500 527 577 660 736 815 906 1020 1077 1186 1325

* Undershelves for 30˝ (762mm) wide tables listed above also fit 36˝ (915mm) wide tables.

Table Mounted Microwave Shelves see spec sheet

EG10.25

• • FEATURES: • •

16 gauge type 304 stainless steel. 24˝ x 24˝ (610 x 610mm) microwave area. Mounts 18˝ (356mm) above tabletop. Six posts. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Left Side

12˝ width (305mm)

length in. mm

weight lbs. kg

60˝ 72˝ 84˝ 96˝

30 35 40 45

1524 1829 2133 2438

13.6 15.9 18.1 20.4

cu ft model # 1.9 MOS1260L 2.4 MOS1272L 3.0 MOS1284L 3.4 MOS1296L

list 989 1121 1213 1343

Center

Right Side model # MOS1260R MOS1272R MOS1284R MOS1296R

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

list 989 1121 1213 1343

weight lbs. kg

cu ft

32 38 43 48

2.1 2.6 3.2 3.7

14.5 17.2 19.5 21.8

model # MOS1260C MOS1272C MOS1284C MOS1296C

list 1123 1254 1343 1400

139


TABLES Catalog Section 10

Drawers

Drawer Capacity Per Table Drawers can be centered, left or right. Holes are predrilled for 20˝ x 20˝ drawers only.

• For stainless steel and hardwood tables. • Type 430 stainless steel. Note:

To specify drawer assemblies for hardwood tables (page 119), you must order model #605500 mounting kit (at no additional charge) along with drawer selected. To specify drawer assemblies for custom equipment (fabricated through SpecFAB®) which requires angle frame construction, you must order model #605499 (at no additional charge) mounting kit along with drawer selected.

table length in. mm

15˝ x 20˝ (381 x 508mm) drawer capacity per table

20˝ x 20˝ (508 x 508mm) drawer capacity per table

24˝ 30˝ 36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝ 132˝ 144˝

0 1 centered 1 centered 1 centered; or 1 left & 1 right 1 centered; or 1 left & 1 right 3 (1 centered, 1 left, 1 right) 4 4 (2 left, 2 right) 4 (2 left, 2 right) 4 (2 left, 2 right) 6 (3 left, 3 right) 6 (3 left, 3 right)

0 0 1 centered 1 centered 1 centered; or 1 left & 1 right 1 centered; or 1 left & 1 right 1 centered; or 1 left & 1 right 2 (1 left, 1 right) 4 (2 left, 2 right) 4 (2 left, 2 right) 4 (2 left, 2 right) 4 (2 left, 2 right)

610 762 914 1219 1524 1829 2134 2438 2743 3048 3353 3658

Drawers with Polymer Slides see spec sheet

EG10.13

FEATURES:

• 1⁄2˝ (13mm) thick polycarbonate grooved friction slides. • To specify drawer assemblies for tabletops with box marine edge, you must order model #607297 mounting kit along with drawer selected. Note:

For use on standard worktables only, not for equipment using angle frame construction. No locks are available for these drawers.

Freight class is 85.0. (•) MTS (made to stock) / ( ) MTO (made to order)

For ALL 24˝ STANDARD tables width x length x height in. mm 20˝ x 15˝ x 5˝ 20˝ x 20˝ x 5˝

508 x 381 x 127 508 x 508 x 127

For ALL 30˝ & 36˝ STANDARD tables

cu weight ft lbs. kg model # list 1.4 13 5.8 502976* • 164 1.4 13 5.8 502975** • 194

weight lbs. kg 13 13

5.8 5.8

model # 503007* • 503006 •

For 36˝ tables with FRAMING specified AT 301⁄8˝ CENTER LINES weight list lbs. kg model # 164 13 5.8 503011 * 194 13 5.8 503010

list 164 194

* Tables must be field drilled for mounting; ** #502975 will protrude past tabletop width.

Drawers with Pull Flange see spec sheet

EG10.13

FEATURES:

• Includes full-extension zinc-plated steel slides with rubber stops. Note:

No locks are available for these drawers.

Freight class is 85.0. (•) MTS (made to stock) / ( ) MTO (made to order)

width x length x height in. mm 20˝ x 15˝ x 5˝ 20˝ x 20˝ x 5˝

508 x 381 x 127 508 x 508 x 127

weight cubic lbs. kg feet model # 13 5.8 1.4 502941* • 13 5.8 1.4 500772 •

* Tables must be field drilled for mounting.

140

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

list 223 257


TABLES Catalog Section 10

Drawers with Pull Flange & Full Front see spec sheet

EG10.13 FEATURES:

• Includes full-extension zinc-plated steel slides with rubber stops. • Hemmed safety pull handle. Note:

No locks are available for these drawers.

Freight class is 85.0. (•) MTS (made to stock) / ( ) MTO (made to order)

width x length x height in. mm 20˝ x 15˝ x 5˝ 20˝ x 20˝ x 5˝

508 x 381 x 127 508 x 508 x 127

weight cubic lbs. kg feet model # 25 11.3 3.0 502942* • 25 11.3 3.0 501571 •

list 332 363

* Tables must be field drilled for mounting.

Tier Drawers - Regular see spec sheet

EG10.13

FEATURES:

• Heavy gauge type 430 stainless steel cabinet with three roller-track drawers. • With or without legs. • Guides. • Full-extension zinc-plated steel slides. • Stainless steel drawer. • Hemmed safety pull handle on each drawer. Note:

All shipping weights and cubic feet are approximate.

Freight class is 85.0. (•) MTS (made to stock) / ( ) MTO (made to order)

tier drawer tier drawer with legs

width x length x height inches mm 221⁄2˝ x 24˝ x 22˝ 221⁄2˝ x 24˝ x 341⁄2˝

572 x 610 x 559 572 x 610 x 876

description 3 drawers, nylon feet 3 drawers, with legs

weight cubic lbs. kg feet model # 75 34.0 9.8 TD3 • 78 35.4 9.8 TD3L

NSF-Approved Tier Drawers see spec sheet

EG10.13

FEATURES:

list 2235 2522

• Utilizes totally removable drawer slides certified by the National Sanitation Foundation. • Otherwise, design and features are the same as tier drawers mentioned above. • Hemmed safety pull handle on each drawer. Note:

Optional Pan Replacement available. Model #608120. $122 list.

Freight class is 85.0. (•) MTS (made to stock) / ( ) MTO (made to order)

removable NSF drawer slide

width x length x height inches mm model #NTD3L with NSF-certified drawer

221⁄2˝ x 24˝ x 22˝ 221⁄2˝ x 24˝ x 341⁄2˝

572 x 610 x 559 572 x 610 x 876

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

description 3 drawers, nylon feet 3 drawers, with legs

weight cubic lbs. kg feet model # 75 34.0 9.8 NTD3 78 35.4 9.8 NTD3L

list 2394 2526

141


TABLES Catalog Section 10

Drawer Assemblies

FEATURES:

see spec sheet

EG10.13

• Removable drawer pan. Note:

All shipping weights and cubic feet are approximate. Lock available. $137 list. To order, add suffix “-L”. Example: 502972-L. To determine number of drawers per table, see chart on page 140.

Freight class is 85.0. (•) MTS (made to stock) / ( ) MTO (made to order)

enclosed drawer assembly

For Stainless Steel and Hardwood Tables!

SPEC-MASTER® heavy duty drawer assembly

Enclosed Assemblies

SPEC-MASTER® Heavy Duty Assemblies

Type 430 stainless steel, front with hemmed safety pull handle, and full-extension zinc-plated steel slides. width x length x height in. mm 20˝ x 15˝ x 5˝ 20˝ x 20˝ x 5˝

508 x 381 x 127 508 x 508 x 127

cu ft

weight lbs. kg

3.0 3.0

35 35

15.9 15.9

model # list 502943 * • 635 501572 • 661

OPTIONAL PAN REPLACEMENT model # list 608115 176 608118 ** 185

Type 304 stainless steel, insulated front and selfclosing drawer slides that fully extend from housing. THESE ASSEMBLIES ARE STACKABLE!! weight lbs. kg model # list 40 18.1 502972 * • 1026 40 18.1 502971 • 1061

OPTIONAL PAN REPLACEMENT model # list 608117 213 606826 221

* Tables must be field drilled for mounting. ** Pan replacement #608118 does NOT fit drawer assembly #501572 with optional lock (#501572-L). Drawer assembly #501572-L only accepts pan replacement #608119, list $248.

Drawer Assemblies With NSF-Approved Slides see spec sheet

EG10.13

FEATURES:

• Type 430 stainless steel. • Utilizes a totally removable drawer slide, making it easy to clean for complete sanitation. • Requires no tools. • All-stainless steel housing, frame, drawer front complete with full-length front pull flange, and removable drawer pan with large radius corners. • Hemmed safety pull handle. Note:

width x length x height in. mm 20˝ x 15˝ x 5˝ 20˝ x 20˝ x 5˝

Freight class is 85.0.

#502946 or 502947 drawer assembly

removable NSF drawer slide

508 x 381 x 127 508 x 508 x 127

weight lbs. kg 35 35

15.9 15.9

To determine number of drawers per table, see chart on page 140. Optional lock available. $137 list. To order, add suffix “-L”. Example: 502946-L.

(•) MTS (made to stock) / ( ) MTO (made to order)

cubic feet 3.0 3.0

model # 502947 * • 502946 •

list 653 685

OPTIONAL PAN REPLACEMENT model # list 608115 176 608116 ** 176

* Tables must be field drilled for mounting. ** Pan replacement #608116 does NOT fit drawer assembly #502946 with optional lock (#502946-L). Drawer assembly #502946-L only accepts pan replacement #608119, list $248.

142

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


TABLES Catalog Section 10

Polymer Drawers see spec sheet

EG10.13

FEATURES:

• Made of heavy gauge polymer. • With pull flange and built-in drawer stop. Freight class is 85.0. (•) MTS (made to stock) / ( ) MTO (made to order)

width x length x depth in. mm 137⁄8˝ x 19˝ x 3˝ 137⁄8˝ x 19˝ x 6˝ 137⁄8˝ x 19˝ x 9˝

weight cubic lbs. kg feet model # 352 x 483 x 76 9 4.1 1.4 502948 352 x 483 x 152 13 5.8 3.0 502949 352 x 483 x 229 18 8.2 4.5 502950

Drawer Kits for All Stainless Steel Worktables see spec sheet description 20˝ x 20˝ x 5˝ enclosed drawer assembly (#501572) 20˝ x 20˝ x 5˝ drawer with pull flange and full front (#501571) 20˝ x 20˝ x 5˝ drawer with pull flange (#500772)

list 264 316 384

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

EG10.13 add * suffix # -D1 -D2 -D3

add to list 661 364 257

* Example: T3060SB-D3

ECO-Built ™ is an important part of The Eagle Advantage. The numbers don’t lie. Eagle’s efforts to consume less, emit less and conserve more are beginning to bear fruit. The tree to the left shows just some of what we now accomplish each year.

Look for the ECO-Built ™ tag on the bar code.

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

143


TABLES Catalog Section 10

Table Mounted Pan/Pot Racks see spec sheet

EG10.12

FEATURES:

• Furnished with 15⁄8˝ (41mm) stainless steel tubular supports extending through table top and fastened securely to adjustable undershelf. • Racks are triple-bar type made of 3⁄16˝ x 2˝ (5 x 51mm), aluminum or type 304 stainless steel bars bolted together and fitted with one two-prong sliding hook per foot. NOTE: All shipping weights and cubic feet are approximate. Worktables with Pan/Pot Rack not recommended for use with casters.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Aluminum fits table rack length length weight in. mm in. mm lbs. kg

cu ft

36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝ 132˝ 144˝

1.7 1.9 1.9 1.9 1.9 2.1 2.3 2.5 2.8 3.1

914 1219 1524 1829 2134 2438 2743 3048 3353 3658

28˝ 40˝ 52˝ 64˝ 76˝ 88˝ 100˝ 112˝ 124˝ 136˝

711 1016 1321 1626 1930 2235 2540 2845 3150 3454

38 42 46 50 54 58 62 66 71 76

17.2 19.1 20.9 22.7 24.5 26.3 28.1 29.9 32.2 34.5

model # TM36APR TM48APR TM60APR TM72APR TM84APR TM96APR TM108APR TM120APR TM132APR TM144APR

Stainless Steel

list 848 881 912 954 1138 1173 1423 1466 1509 1559

weight lbs. kg

cu ft

50 57 64 70 77 83 89 95 102 109

1.7 1.9 1.9 1.9 1.9 2.1 2.3 2.5 2.8 3.1

22.7 25.9 29.0 31.8 34.9 37.6 40.4 43.1 46.3 49.4

model # TM36PR TM48PR TM60PR TM72PR • TM84PR TM96PR TM108PR TM120PR TM132PR TM144PR

list 1014 1071 1128 1187 1404 1462 1767 1841 1932 1969

Optional Adjustable Shelves for Table Mounted Pan/Pot Racks • 12˝ (305mm) wide. • 16 gauge, type 304 stainless steel. shelf length in. mm

weight lbs. kg

36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝ 132˝ 144˝

16 20 25 30 35 39 41 45 49 53

914 1219 1524 1829 2134 2438 2743 3048 3353 3658

7.3 9.0 11.3 13.6 15.9 17.6 18.6 20.4 22.2 24.0

cubic feet 0.9 1.3 1.6 1.9 2.2 2.5 3.1 3.6 4.1 4.7

model # TM36PRS TM48PRS TM60PRS TM72PRS TM84PRS TM96PRS TM108PRS TM120PRS TM132PRS TM144PRS

list 413 446 478 516 554 613 1578 1594 1665 1683

optional adjustable shelf for table mounted pot/pan racks

SpecFAB®’s Custom Tables Each custom table is crafted to your exact specifications. Options and accessories are endless with EAGLE’s broad line of products such as center shelves, top cutouts, sinks, end splashes, knife racks and many more. The options are endless and the decisions are up to you. SpecFAB® provides a way to short-cut the design and fabrication process. Depending on our customer’s need, we can design in superior pre-fab modular components. Having this flexibility means we deliver custom equipment faster and at a lower cost.

Just another way you can Profit From The EAGLE Advantage®.

144

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


TABLES Catalog Section 10

Ceiling Mounted Pan / Pot Racks see spec sheet

EG10.12

FEATURES:

• Furnished with chain hangers for ceiling suspension. • Racks are triple-bar type made of 3⁄16˝ x 2˝ (5 x 51mm), aluminum or type 304 stainless steel bars bolted together and fitted with one two-prong sliding hook per foot. Note:

All shipping weights and cubic feet are approximate.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Aluminum rack length in. mm

weight lbs. kg

cu ft

28˝ 40˝ 52˝ 64˝ 76˝ 88˝ 100˝ 112˝ 124˝ 136˝

28 32 36 40 44 48 53 58 63 68

0.7 0.9 1.2 1.6 1.9 2.1 2.5 2.9 3.3 3.7

711 1016 1321 1626 1930 2235 2540 2845 3150 3454

12.7 14.5 16.3 18.1 20.0 21.8 24.0 26.3 28.6 30.8

Stainless Steel

model # CM36APR CM48APR • CM60APR • CM72APR • CM84APR CM96APR CM108APR CM120APR CM132APR CM144APR

list 682 717 749 792 980 1011 1182 1196 1259 1284

weight lbs. kg

cu ft

41 48 54 60 67 74 81 87 94 101

0.7 0.9 1.2 1.6 1.8 2.1 2.5 2.9 3.3 3.7

18.6 21.8 24.5 27.2 30.4 33.6 36.7 39.5 42.6 45.8

model # CM36PR CM48PR • CM60PR • CM72PR • CM84PR CM96PR CM108PR CM120PR CM132PR CM144PR

Wall Mounted Pan / Pot Racks see spec sheet

EG10.12

FEATURES:

list 872 911 972 1028 1251 1307 1646 1736 1760 2008

• Racks are double-bar type made of 3⁄16˝ x 2˝ (5 x 51mm), aluminum or type 304 stainless steel bars bolted together and fitted with one two-prong sliding hook per foot. • Stainless steel brackets. • 16˝ (406mm) height. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

NEW

Aluminum rack length weight in. mm lbs. kg

cu ft

36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 108˝ 120˝ 132˝ 144˝

1.0 1.2 1.4 1.8 2.0 2.3 2.6 2.9 3.2 3.5

914 1219 1524 1829 2134 2438 2743 3048 3353 3658

13 15 17 19 21 23 25 28 31 34

5.8 6.8 7.7 8.6 9.5 10.4 11.3 12.7 14.1 15.4

model # WM36APR • WM48APR • WM60APR • WM72APR • WM84APR • WM96APR • WM108APR WM120APR WM132APR WM144APR

Corner Guards

Stainless Steel weight cu list lbs. kg ft model # 246 18 8.2 1.0 WM36PR • 257 22 10.0 1.2 WM48PR • 294 26 11.8 1.4 WM60PR • 376 29 13.2 1.8 WM72PR • 396 33 15.0 2.0 WM84PR • 486 37 16.8 2.3 WM96PR • 586 41 18.6 2.6 WM108PR 594 45 20.4 2.9 WM120PR 688 50 22.7 3.3 WM132PR 738 55 24.9 3.5 WM144PR

see spec sheet EG10.14

list 284 342 366 466 505 718 805 853 866 1088

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

• Adheres to corner of adjacent wall(s). • Heavy gauge stainless steel. • Adhesive tape backing.

2˝ x 2˝ Inner 2˝ x 2˝ Outer Corner Guards Corner Guards height in. mm model # 36˝ 914 CG-I-36 48˝ 1219 CG-I-48 60˝ 1524 CG-I-60 72˝ 1829 CG-I-72

list 99 115 131 145

model # CG-O-36 CG-O-48 CG-O-60 CG-O-72

list 99 115 131 145

145


TABLES Catalog Section 10

- Options / Accessories / Replacements see spec sheet

EG10.50

Please allow six to eight weeks shipping cycle for custom fabrication after receipt of approved drawings. Add 10% upcharge to expedite 4-week shipping cycle. See pages 337-340 for more custom options and accesories. model #

description

E10 E11 E12 E13 E15 300698 300699 317635 317636 313835 300692 301036 300293 E17 E18 * E18.1 * E18.2 * E19

Square edge table - front and/or rear per table 195 Marine counter edge per table 421 “V” type marine edge (not available in 16/430) per table 421 Bullnose edge per table 400 Vertical tray dividers - 4-section assembly, 3˝ on centers each 622 Casters - 4˝ (102mm)-diameter with brake each 96 Casters - 4˝ (102mm)-diameter without brake each 91 Casters - 5˝ (127mm)-diameter with brake each 124 Casters - 5˝ (127mm)-diameter without brake each 124 Stainless steel flanged bullet feet each 24 Bullet feet - stainless steel each 17 Bullet feet - white metal each 9 Bullet feet - plastic each 2 Special height legs per table 146 Duplex receptacle and mounting plate (under table) each 369 Duplex receptacle in splash (requires at least 6˝-high splash) each 356 Pedestal duplex receptacle (top of table or overshelf) each 411 Stainless steel gussets each 32 Sinks — complete with faucet and basket drain (Specify location) - 10˝ x 14˝ x 9.5˝ bowl (254 x 356 x 241mm) each 993 - 14˝ x 16˝ x 9.5˝ bowl (356 x 406 x 241mm) each 1043 - 16˝ x 20˝ x 8˝ bowl (406 x 508 x 203mm) each 1113 - 16˝ x 20˝ x 14˝ bowl (406 x 508 x 356mm) each 1234 - 18˝ x 20˝ x 14˝ bowl (457 x 508 x 356mm) each 1353 - 20˝ x 20˝ x 14˝ (508 x 508 x 356mm) each 1362 - 24˝ x 24˝ x 14˝ bowl (610 x 610 x 356mm) for 36˝ (914mm)-wide tables each 1844 T&S faucet upgrade - deck mount 4˝ (102mm) centers each 552

E20A E21 E22 ** E23 ** E24 ** E24A ** E25

unit

list model # 300720 300721 300722 341189 *** 336002 *** 341190 *** E27 E28 E29

unit

list

Lever drains - 1.5˝ I.P.S. (38mm) Lever drains - 2˝ I.P.S. (51mm) Lever drains - 2˝ I.P.S. (51mm) with overflow Twist handle drains - 1.5˝ I.P.S. (38mm) Twist handle drains - 2˝ I.P.S. (51mm) Twist handle drains - 2˝ I.P.S. (51mm) with overflow Top cutout - square or round (Specify location) Angle slides for pans, up to six pairs (Specify location and pan size) Urn trough, 4.5˝ wide x 1.25˝ deep (114 x 32mm) with 1.5˝ (38mm) drain, complete with louvered grate.

each each each each each each each

213 213 438 225 225 509 264

set

545

lin. ft

133

(Length must be maximum of 6˝ shorter than table. Specify location.)

E30 E31 E32 E33 E34

End splash — per end (Specify end), all heights 1.5˝ (38mm) rear upturn for undershelf Can opener hole with under table support (Specify location) Sink splashes — single thickness 4˝ tall (102mm) Column cutout (Send floor plan/sketch)

model #

description

each table

unit

list

Scrap chute, 6˝ (152mm)-diameter Knife rack (fits rolled rim, poly, and square edge tables) 16 gauge s/s apron in front of sinks or cutouts Fully welded - top, undershelf & legs Welded base only - undershelf & legs NSF sprayed-on sound deadening up to 12´(3658mm) - for each additional foot Cantilever mount up to 6´(1829mm) - add to wall shelf price Cantilever mount up to 12´(3658mm) - add to wall shelf price Enclosed backsplash

each each lin. ft each each table lin. ft each each lin. ft

208 301 145 465 312 627 38 364 544 78

each each

Optional Sinks Built Into Tables – Standard Locations

Optional Table Edges square edge

marine counter edge

sink on left/right side of table

sink on center of table

sink with faucet on end of table

marine edge

bullnose edge

146

287 115 187 297 614

NOT PICTURED

606329 606331 E35 E36 E36A E37 E37A 313304 E38-6 **** * For GFI receptacle, add “-GFI” to E number (example: E18.1-GFI) and $37 to list price. E38-12 **** ** These sink bowls will not fit in a table any less than 30˝ (762mm) wide. E39 *** Optional twist drain brackets available for use with twist handle drains. **** Applicable to wall mount shelves and pot racks.

description

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


Sinks Accessories/Replacements Hand Sinks ..............................159-162 All Other Sinks..................163, 181-185

Custom Options ..................181 412, 414, and 314 Series Sinks One-Compartment ..........................164 Two-Compartment ..........................165 Three-Compartment ........................166 Four-Compartment ..........................167

Counter Drop-In Sinks ..........178

Floor Drains/Troughs ......186-188 Hand Sinks..................148-162 Accessories ..............................159-162 Electronic..................................151-152 HFL-5000 Handwashing System......148 Physically Challenged / ADA ............155 With Waste Receptacle ....................158

Lavatory ..........................................162 Mop Sink ........................................177 Mop Sink Storage Cabinet ..............177

SPEC-MASTER® FN Series Heavy Duty Sinks

OEM Sink Bowls ..........179-180

One-Compartment ..........................168 Two-Compartment ..........................169 Three-Compartment ........................170 Four-Compartment ..........................171

Specialty Sinks

FFN Series Flush Front ....................174 Supermarket Meat-Platter................175

314 Series Corner ..........................176 Convenience Store ..........................176

Utility Sinks ................172-174

EAGLE HAND SINKS WITH MICROGARD ® Antimicrobial Protection. NOW HERE’S A GREAT IDEA:

THE INDUSTRY’S CLEAN LEADER.

making your handwashing stations more convenient and accessible by integrating them into your work sequence. What better way to attain more frequent handwashing. Let the industry’s clean leader help by giving you the widest range of hand sink choices – many available with exclusive MICROGARD® Antimicrobial Protection. More models, configurations and accessories mean more design options for you... so you’ll have more efficient work areas along with improved hygiene. For all the details on how EAGLE hand sinks add up to better sanitation, visit www.eaglegrp.com.

147


Quality…Value…Reliability! The EAGLE Advantage can be summed up in two concise points: price/value leadership and value-added service. EAGLE GROUP is committed to providing you and your customer high-quality products while maintaining the cost competitiveness necessary in today’s marketplace.

All 414 Series Sinks

All FN SPEC-MASTER® Series Sinks:

• 14˝ (356mm) deep seamless deep-drawn bowls to meet the most stringent health codes while maintaining the value and quality only a drawn bowl can offer. • Have an extra-high 91⁄2˝ (241mm) backsplash with upturn for easy and clean installation. • Incorporate the “strength by design” feature of leg gussets welded to plates adjacent to bowls for maximum weight support and stability. • Integral drainboards are creased for maximum drainage and fully incorporate NSF standards • Are available in more standard sizes than the competition. • All sinks shipped fully crated.

• Are constructed of 14 gauge type 304 stainless steel. • Include 14˝ (356mm) deep fabricated type bowls to meet the most stringent health codes. • Adjustable crossbracing on all four sides. • Utilize a fabricated bowl design for those jobs where quality and durability are paramount. • Have an extra-high 91⁄2˝ (241mm) backsplash with upturn for easy and clean installation. • Utilizes heavy duty stainless steel gussets and legs with stainless steel side stretchers. • Integral drainboards are creased for maximum drainage and fully incorporate NSF standards. • Are available in more standard sizes than the competition. • All sinks shipped fully crated.

HFL-5000 Touch-Free Handwashing Systems see spec sheet EG20.55 • EAGLE hand sink with MICROGARD® antimicrobial protection. • San Jamar touchless towel dispenser. EAGLE part #352854. Use Tork #RB1000 towel roll #H21 system. • T&S electronic eye faucet, splash mounted with battery-saving hydrogenerator power source. A LEED-friendly combination with the flow of water creating its own power source. EAGLE part #369865. • Purell/TFX hand sanitizing dispenser. EAGLE part #352852. • Gojo/TFX hand soap dispenser. EAGLE part #352853. • FoodHandler glove rack with single service gloves. Model #11-0012. EAGLE part #352855. • Tucel soft bristle white nail brush. Model #1832. EAGLE part #348602 description of hand sink included with waste receptacle with skirt (no waste receptacle) with waste receptacle and end splashes

148

model # list HFL-5000 3674 HFL-5000-S 3529 HFL-5000-LRS 4097

Optional MICROGARD®* for Hand Sinks! (See pages 149-158 for applicable hand sinks.) • MICROGARD® is an antimicrobial agent which contains built-in protection to retard the growth of a broad range of bacteria, mold and mildew on the surface that cause stains, odors and degradation. • MICROGARD® combines inorganic antimicrobial silver ions with a patented delivery system. The patented delivery system triggers the release of silver ions which react with bacteria in three ways: 1) Suffocates the cell. 2) Stops the cell reproduction system. 3) Stops the cell from growing. • MICROGARD® is a second line of defense. In keeping with good hygiene practices, clean this product as usual. The protection will not wash out, while organic bactericides may.** • MICROGARD® is applied onto top and underside of sink deck, backsplash, and inside & outside of sink bowl (excludes faucets, drains, towel/soap dispensers, waste receptacle, skirt, pedal valves, and nail brush holder). * MICROGARD® does not protect users or others against bacteria, viruses, germs or other disease organisms. Always clean this product thoroughly after each use.

NOTE: Listed under Kochman ** Note: To clean, use mild soap and water, rinse, and wipe entire surface dry. AutoCAD symbol library Soft non-abrasive cleaners may be used when necessary. Strong abrasive for foodservice equipment. cleaners will scratch and dull the surface. 100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


SINKS Catalog Section 20 • • • • •

Traditional Hand Sinks see spec sheet

EG20.40

MICROGARD® an antimicrobial agent which contains built-in protection to retard the growth of a broad range of bacteria, mold and mildew on shelf surface that causes stains, odors and degradation.

FEATURES:

All sinks are wall mountable. Deep-drawn seamless design. Positive drain, included on all models. All type 304 stainless steel. Splash mount gooseneck faucet included on all models except HSA-10. Freight class is 85.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Cleanest sinks in the industry! HSA-10 * •

list:

93⁄4˝ x 131⁄2˝ x 63⁄4˝ (248 x 343 x 173mm)

overall size:

143⁄4˝ x 187⁄8˝ x 123⁄4˝ (376 x 480 x 324mm)

overall size:

143⁄4˝ x 187⁄8˝ x 123⁄4˝ (376 x 480 x 324mm)

weight:

10 lbs., 4.5 kg

cubic feet:

2.8

includes: 4˝ (102mm) centerline faucet holes, basket drain.

list:

552

MICROGARD® available: To order, add suffix “-MG” to model # / add $110 to list price.

2.8

includes: Faucet with wrist handles, p-trap, tail piece, basket drain.

HSA-10-FL •

list:

789

93⁄4˝ x 131⁄2˝ x 63⁄4˝ (248 x 343 x 173mm)

bowl size:

10˝ x 14˝ x 5˝ (254 x 356 x 127mm)

overall size:

143⁄4˝ x 187⁄8˝ x 123⁄4˝ (376 x 480 x 324mm)

overall size:

143⁄4˝ x 187⁄8˝ x 121⁄2˝ (376 x 480 x 318mm)

cubic feet:

weight:

12 lbs., 5.2 kg

cubic feet:

2.8

HSA-10-FA •

list:

583

15 lbs., 6.6 kg 2.8

includes: Faucet, polymer lever drain.

includes: Faucet, basket drain.

To order, add suffix “-MG” to model # / add $110 to list price.

HSA-10-FO •

list:

654

bowl size:

93⁄4˝ x 131⁄2˝ x 63⁄4˝ (248 x 343 x 173mm)

bowl size:

10˝ x 14˝ x 5˝ (254 x 356 x 127mm)

overall size:

143⁄4˝ x 187⁄8˝ x 123⁄4˝ (376 x 480 x 324mm)

overall size:

143⁄4˝ x 187⁄8˝ x 121⁄2˝ (376 x 480 x 318mm)

weight: cubic feet:

To order, add suffix “-MG” to model # / add $110 to list price.

14 lbs., 6.4 kg

bowl size:

weight:

MICROGARD® available:

742

bowl size:

HSA-10-F •

MICROGARD® available:

list:

93⁄4˝ x 131⁄2˝ x 63⁄4˝ (248 x 343 x 173mm)

cubic feet:

To order, add suffix “-MG” to model # / add $110 to list price.

HSA-10-FAW •

bowl size:

weight:

MICROGARD® available:

471

14 lbs., 6.4 kg 2.8

includes: Faucet, p-trap, tail piece, basket drain.

weight: cubic feet:

13 lbs., 5.6 kg 2.8

includes: Faucet, polymer lever drain w/overflow.

* To order hand sink with no faucet holes, add suffix “-NH” to model number (example: HSA-10-NH). $142 upcharge. 100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

149


SINKS Catalog Section 20

Hand Sinks with Standard Towel Dispenser and/or Soap Dispenser see spec sheets

EG20.05

EG20.41

MICROGARD® an antimicrobial agent which contains built-in protection to retard the growth of a broad range of bacteria, mold and mildew on shelf surface that causes stains, odors and degradation.

FEATURES:

• Deep-drawn positive drain and splash mount gooseneck faucet included on all models. • All 304 series stainless steel, including towel dispenser. • Soap dispenser on all models holds 16 ounces. • Towel dispenser holds 4˝ x 10˝ (102 x 254mm) C-fold disposable paper towels. Freight class is 85.0. (•) MTS (made to stock) / ( ) MTO (made to order)

HSA-10-FDP

list: 1161 93⁄4˝ x 131⁄2˝ x 63⁄4˝ (248 x 343 x 173mm)

bowl size:

10˝ x 14˝ x 5˝ (254 x 356 x 127mm)

overall size:

143⁄4˝ x 191⁄4˝ x 281⁄4˝ (376 x 489 x 718mm)

overall size:

143⁄4˝ x 191⁄4˝ x 28˝ (376 x 489 x 711mm)

cubic feet: MICROGARD® available:

27 lbs., 12.2 kg

cubic feet:

includes: Faucet, towel dispenser, soap dispenser, basket drain.

list: 1684

6.2

includes: Faucet, towel dispenser, soap dispenser, polymer lever drain w/overflow.

HSA-10-F-DS*

list:

727

93⁄4˝ x 131⁄2˝ x 63⁄4˝ (248 x 343 x 173mm)

bowl size:

93⁄4˝ x 131⁄2˝ x 61⁄2˝ (248 x 343 x 165mm)

overall size:

143⁄4˝ x 191⁄4˝ x 30˝ (376 x 489 x 762mm)

overall size:

1413⁄16˝ x 187⁄8˝ x 123⁄4˝ (376 x 480 x 324mm)

cubic feet:

34 lbs., 15.4 kg

weight:

6.2

cubic feet:

includes: Faucet, towel dispenser, soap dispenser, skirt, basket drain.

HSA-10-FLDP

list: 1394

MICROGARD® available: To order, add suffix “-MG” to model # / add $110 to list price.

12 lbs., 5.2 kg 2.8

includes: Faucet, deck-mount soap dispenser, basket drain.

HSAN-10-F-DS*

list:

838

bowl size:

10˝ x 14˝ x 5˝ (254 x 356 x 127mm)

bowl size:

131⁄2˝ x 93⁄4˝ x 61⁄2˝ (343 x 248 x 165mm)

overall size:

143⁄4˝ x 191⁄4˝ x 28˝ (376 x 489 x 711mm)

overall size:

1713⁄16˝ x 121⁄8˝ x 141⁄4˝ (457 x 308 x 362mm)

weight: cubic feet:

27 lbs., 12.2 kg

weight:

6.2

cubic feet:

includes: Faucet, towel dispenser, soap dispenser, polymer lever drain.

12 lbs., 5.2 kg 2.8

includes: Faucet, deck-mount soap dispenser, basket drain.

* Overall height does not include soap dispenser globe.

150

27 lbs., 12.2 kg

bowl size:

weight:

To order, add suffix “-MG” to model # / add $110 to list price.

weight:

6.2

HSA-10-FDPS

MICROGARD® available:

list: 1426

bowl size:

weight:

To order, add suffix “-MG” to model # / add $110 to list price.

HSA-10-FODP

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


SINKS Catalog Section 20

Electronic Eye Hand Sinks - AC POWER see spec sheet Note:

EG20.42

For regulating water temperature, Temperature Adjustment Valve (see page 160) is required.

MICROGARD® an antimicrobial agent which contains built-in protection to retard the growth of a broad range of bacteria, mold and mildew on shelf surface that causes stains, odors and degradation.

FEATURES:

• Electronic “eye” sensor beam activates water flow and adjusts from 3˝ to 12˝ (76 to 305mm). • Requires 120-volt, 15-amp electricity. • 12-volt adapter. • Splash mount gooseneck spout. • Lever or basket drain. • Y-Inlet Non-Adjustable Mixing Valve. Freight class is 85.0. (•) MTS (made to stock) / ( ) MTO (made to order)

HSA-10-FE*•

list: 2008 93⁄4˝ x 131⁄2˝ x 63⁄4˝ (248 x 343 x 173mm)

bowl size:

93⁄4˝ x 131⁄2˝ x 63⁄4˝ (248 x 343 x 173mm)

overall size:

143⁄4˝ x 187⁄8˝ x 123⁄4˝ (376 x 480 x 324mm)

overall size:

143⁄4˝ x 191⁄4˝ x 281⁄4˝ (376 x 489 x 718mm)

cubic feet:

To order, add suffix “-MG” to model # / add $110 to list price.

weight:

14 lbs., 6.3 kg

cubic feet:

2.8

includes: Spout, electronic eye, and basket drain.

HSA-10-FOE

list: 2111

MICROGARD® available:

6.2

includes: Spout, electronic eye, soap dispenser, towel dispenser, and basket drain.

To order, add suffix “-MG” to model # / add $110 to list price.

HSA-10-FODPE

list: 2886

10˝ x 14˝ x 5˝ (254 x 356 x 127mm)

bowl size:

10˝ x 14˝ x 5˝ (254 x 356 x 127mm)

overall size:

143⁄4˝ x 187⁄8˝ x 121⁄2˝ (376 x 480 x 318mm)

overall size:

143⁄4˝ x 191⁄4˝ x 28˝ (376 x 489 x 711mm)

cubic feet:

weight:

13 lbs., 5.7 kg

cubic feet:

2.8

HSA-10-FA-PE

list: 2673 bowl size: overall size: weight: cubic feet:

HSA-10-FDPEE

143⁄4˝ x 187⁄8˝ x 403⁄4˝ (376 x 480 x 1036mm)

list: 3149 bowl size:

93⁄4˝ x 131⁄2˝ x 63⁄4˝ (248 x 343 x 173mm)

overall size:

143⁄4˝ x 191⁄4˝ x 311⁄4˝ (376 x 489 x 794mm)

weight:

28 lbs., 12.7 kg

cubic feet:

5.9

dispenser, P-trap, tail piece, and basket drain.

6.2 dispenser, towel dispenser, and polymer lever drain with overflow.

93⁄4˝ x 131⁄2˝ x 63⁄4˝ (248 x 343 x 173mm)

includes: Spout, electronic eye, soap

27 lbs., 12.2 kg

includes: Spout, electronic eye, soap

includes: Spout, electronic eye, and polymer lever drain with overflow.

To order, add suffix “-MG” to model # / add $110 to list price.

27 lbs., 12.2 kg

bowl size:

weight:

MICROGARD® available:

list: 2874

bowl size:

weight:

MICROGARD® available:

HSA-10-FDPE *

MICROGARD® available: To order, add suffix “-MG” to model # / add $110 to list price.

29 lbs., 13.2 kg 6.2

includes: Spout, electronic eye, towel dispenser, electronic soap dispenser, and basket drain.

* Optional waste receptacle available for models HSA-10-FE, HSA-10-FPDE, and HSA-10-FDPEE. See page 161. 100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

151


SINKS Catalog Section 20

Electronic Hand Sinks - Battery Power see spec sheets

EG20.07

EG20.49

MICROGARD® an antimicrobial agent which contains built-in protection to retard the growth of a broad range of bacteria, mold and mildew on shelf surface that causes stains, odors and degradation.

FEATURES:

• Battery-powered electronic-eye faucet which operates on a 6-volt battery with a life of 1-3 years, depending on usage, and standard. • Y-Inlet Non-Adjustable Mixing Valve. • “Low battery” indicator light. Freight class is 85.0. (•) MTS (made to stock) / ( ) MTO (made to order)

HSA-10-FDPEE-B-T

list: 4418 bowl size: overall size: weight: cubic feet:

MICROGARD® available:

includes:

To order, add suffix “-MG” to model # / add $110 to list price.

list: 4406

93⁄4˝ x 131⁄2˝ x 63⁄4˝ (248 x 343 x 173mm) 143⁄4˝ x 191⁄4˝ x 471⁄2˝ (376 x 489 x 1207mm)

bowl size:

16˝ x 14˝ x 5˝ (406 x 356 x 127mm)

overall size:

24˝ x 22˝ x 241⁄2˝ (610 x 559 x 623mm)

weight:

46 lbs., 20.9 kg 6.2

cubic feet:

list: 2495

6.2 faucet, basket drain, c-fold towel dispenser in front, deckmount soap dispenser, skirt.

HSA-10-FE-B-NB-MG

list: 2543

bowl size:

93⁄4˝ x 131⁄2˝ x 63⁄4˝ (248 x 343 x 173mm)

bowl size:

93⁄4˝ x 131⁄2˝ x 63⁄4˝ (248 x 343 x 173mm)

overall size:

1413⁄16˝ x 187⁄8˝ x 123⁄4˝ (376 x 480 x 324mm)

overall size:

1413⁄16˝ x 187⁄8˝ x 123⁄4˝ (376 x 480 x 324mm)

weight: cubic feet: includes:

weight:

12 lbs., 5.2 kg 2.8

cubic feet:

To order, add suffix “-MG” to model # / add $110 to list price.

Battery-powered electronic eye faucet, deck-mount soap dispenser, basket drain.

HSAN-10-FE-B-DS*

list: 2795

MICROGARD® Standard

12 lbs., 5.2 kg 2.8

includes: Battery-powered electronic eye

faucet, splash-mount nail brush holder, nail brush, MICROGARD®, basket drain.

HSA-10-FE-B-T-NB-MG

list: 3134

bowl size:

131⁄2˝ x 93⁄4˝ x 63⁄4˝ (343 x 248 x 171mm)

bowl size:

93⁄4˝ x 131⁄2˝ x 63⁄4˝ (248 x 343 x 173mm)

overall size:

1713⁄16˝ x 121⁄8˝ x 141⁄4˝ (457 x 308 x 362mm)

overall size:

1413⁄16˝ x 187⁄8˝ x 291⁄8˝ (376 x 480 x 740mm)

weight: cubic feet:

weight:

12 lbs., 5.2 kg 2.8

cubic feet:

includes: Battery-powered electronic eye faucet, deck-mount soap dispenser, basket drain.

MICROGARD® Standard

includes:

* Overall height does not include soap dispenser globe.

152

15 lbs., 6.8 kg

includes: Battery-powered electronic eye

Battery-powered electronic eye faucet, towel dispenser, electronic soap dispenser, waste receptacle & skirt, and basket drain.

HSA-10-FE-B-DS*

MICROGARD® available:

HSAP-14-ADA-FE-B

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

29 lbs., 13.1 kg 3.2 Battery-powered electronic eye faucet, splash-mount nail brush holder, nail brush, MICROGARD® waste receptacle & skirt, basket drain.


SINKS Catalog Section 20

Miscellaneous Hand Sinks see spec sheets

Freight class is 85.0.

EG20.21

(•) MTS (made to stock) / ( ) MTO (made to order)

EG20.44

MICROGARD® an antimicrobial agent which contains built-in protection to retard the growth of a broad range of bacteria, mold and mildew on shelf surface that causes stains, odors and degradation.

HSA-10-FKP

list: 2136 bowl size: overall size:

single knee pedal valve

MICROGARD® available: To order, add suffix “-MG” to model # / add $110 to list price.

HSA-10-FA-P •

list: 1220 bowl size: overall size: weight:

with Foot Valve Operation

cubic feet:

MICROGARD available: ®

To order, add suffix “-MG” to model # / add $110 to list price.

1

includes: Spout, foot pedal valves, P-trap, tail piece, basket drain.

list: 1220

®

MICROGARD available: To order, add suffix “-MG” to model # / add $110 to list price.

overall size:

®

MICROGARD available: To order, add suffix “-MG” to model # / add $110 to list price.

weight: cubic feet:

27 lbs., 12.2 kg 3.1

includes: Spout, single knee pedal, skirt, and basket drain.

HSA-10-FDPK *

list: 1832 bowl size:

9 ⁄4˝ x 13 ⁄2˝ x 63⁄4˝ (248 x 343 x 173mm)

overall size:

143⁄4˝ x 187⁄8˝ x 391⁄4˝ (376 x 480 x 997mm)

overall size:

143⁄4˝ x 191⁄4˝ x 33˝ (376 x 489 x 838mm)

weight: cubic feet:

3

3

32 lbs., 14.5 kg

with Knee Valve Operation

5.9

includes: Spout, single foot pedal valve, P-trap, tail piece, basket drain.

®

MICROGARD available:

weight: cubic feet:

1

38 lbs., 17.2 kg 6.2

includes: Spout, knee pedals, skirt, soap dispenser, towel dispenser, basket drain.

To order, add suffix “-MG” to model # / add $110 to list price.

HSA-10-FW •

list:

637

bowl size:

93⁄4˝ x 131⁄2˝ x 63⁄4˝ (248 x 343 x 173mm)

bowl size:

93⁄4˝ x 131⁄2˝ x 63⁄4˝ (248 x 343 x 173mm)

overall size:

143⁄4˝ x 187⁄8˝ x 171⁄2˝ (376 x 480 x 445mm)

overall size:

143⁄4˝ x 187⁄8˝ x 123⁄4˝ (376 x 480 x 324mm)

weight:

MICROGARD® available:

9 ⁄4˝ x 13 ⁄2˝ x 63⁄4˝ (248 x 343 x 173mm) 143⁄4˝ x 187⁄8˝ x 171⁄2˝ (376 x 480 x 445mm)

9 ⁄4˝ x 13 ⁄2˝ x 6 ⁄4˝ (248 x 343 x 173mm) 1

list: 1196

To order, add suffix “-MG” to model # / add $110 to list price.

list: 1196 1

bowl size:

HSA-10-FK * •

with Knee Valve Operation

3.1

includes: Spout, single pedal knee valve, skirt, basket drain.

bowl size:

with Knee Valve Operation

1

27 lbs., 12.2 kg

3

5.9

3

with Foot Valve Operation

cubic feet:

3

32 lbs., 14.5 kg

HSA-10-FA-1P •

weight:

HSA-10-1FK*•

9 ⁄4˝ x 13 ⁄2˝ x 6 ⁄4˝ (248 x 343 x 173mm) 143⁄4˝ x 187⁄8˝ x 391⁄4˝ (376 x 480 x 997mm) 3

9 ⁄4˝ x 13 ⁄2˝ x 63⁄4˝ (248 x 343 x 173mm) 143⁄4˝ x 187⁄8˝ x 171⁄2˝ (376 x 480 x 445mm) 3

cubic feet:

weight:

27 lbs., 12.2 kg 3.1

includes: Spout, knee pedals, skirt, and basket drain.

with Standard Wrist Handles

MICROGARD® available: To order, add suffix “-MG” to model # / add $110 to list price.

cubic feet:

14 lbs., 6.4 kg 2.8

includes: Faucet with wrist handles, basket drain.

* Overall height does not include skirt and knee valves. 100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

153


SINKS Catalog Section 20

Miscellaneous Hand Sinks

Freight class is 85.0.

see spec sheet

EG20.31

(•) MTS (made to stock) / ( ) MTO (made to order)

MICROGARD® an antimicrobial agent which contains built-in protection to retard the growth of a broad range of bacteria, mold and mildew on shelf surface that causes stains, odors and degradation.

HSA-10-FAW •

list:

742

HSA-10-FTWS

list:

871

bowl size:

93⁄4˝ x 131⁄2˝ x 63⁄4˝ (248 x 343 x 173mm)

bowl size:

93⁄4˝ x 131⁄2˝ x 63⁄4˝ (248 x 343 x 173mm)

overall size:

143⁄4˝ x 187⁄8˝ x 123⁄4˝ (376 x 480 x 324mm)

overall size:

143⁄4˝ x 187⁄8˝ x 123⁄4˝ (376 x 480 x 324mm)

weight: with Standard Wrist Handles

cubic feet:

MICROGARD® available: To order, add suffix “-MG” to model # / add $110 to list price.

weight:

14 lbs., 6.4 kg with Tubular Wall Support

2.8

MICROGARD® available:

includes: Faucet with wrist handles, P-trap, tail piece, basket drain.

To order, add suffix “-MG” to model # / add $110 to list price.

3.1

includes: Faucet, tubular wall brackets, basket drain.

• • • • •

Hand Wash Sinks see spec sheet

cubic feet:

20 lbs., 9.0 kg

EG20.47

FEATURES:

Type 304 stainless steel all-welded construction. 11⁄2˝ (38mm) bull nose front edge. Hinged door with pull handle and magnetic catch. Pump-action soap dispenser on rear deck. Built-in front-loading C-fold towel dispenser located in front of sink bowl. • Deck-mounted faucet. • Basket drain. • Crumb cup. Freight class is 85.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Model # HWC-E

Model # HWB-E

Space-Saver Models • Wall-mountable. • Furnished with Z-clips to secure to wall. bowl size width x length x depth in. mm 91⁄4˝ x 111⁄2˝ x 6˝

235 x 292 x 152

overall size width x length x height in. mm 169⁄16˝ x 14˝ x 211⁄4˝

421 x 356 x 540

WITH STANDARD WITH T&S weight FAUCET FAUCET lbs. kg model # list model # list 28 12.7 HWC-E 2214 HWC-T 2416

Drop-In Models bowl size width x length x depth in. mm 91⁄4˝ x 111⁄2˝ x 6˝

154

235 x 292 x 152

overall size width x length x height in. mm 171⁄2˝ x 161⁄2˝ x 171⁄4˝

cutout dimensions width x length in. mm

445 x 419 x 438

16˝ x 147⁄8˝

406 x 378

WITH STANDARD WITH T&S weight FAUCET FAUCET lbs. kg model # list model # list 29 13.2 HWB-E 2315 HWB-T 2516

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


SINKS Catalog Section 20

Physically Challenged Hand Sinks see spec sheet

FEATURES:

EG20.45

Freight class is 85.0.

Designed for unique applications! HSAP-14-FW •

• Standard with faucet and basket drain.

list: 1588

(•) MTS (made to stock) / ( ) MTO (made to order)

HSAP-14-ADA-FE-B

list: 4406

bowl size:

16˝ x 14˝ x 5˝ (406 x 356 x 127mm)

bowl size:

16˝ x 14˝ x 5˝ (406 x 356 x 127mm)

overall size:

241⁄8˝ x 19˝ x 161⁄2˝ (613 x 483 x 419mm)

overall size:

24˝ x 22˝ x 241⁄2˝ (610 x 559 x 623mm)

weight: cubic feet:

weight:

15 lbs., 6.8 kg 3.7

cubic feet:

includes: Faucet, basket drain, and wall brackets.

HSAP-14-ADA-FW

15 lbs., 6.8 kg 6.2

includes: Battery-powered electronic eye splash-mount faucet, c-fold towel dispenser in front, deck mount soap dispenser, skirt, basket drain.

list: 3768 bowl size:

16˝ x 14˝ x 5˝ (406 x 356 x 127mm)

overall size:

24˝ x 22˝ x 241⁄2˝ (610 x 559 x 623mm)

weight: cubic feet:

15 lbs., 6.8 kg 6.2

GET FREE DOWNLOADS • Spec Sheet • Product Instructions • Special Flyers • Brochures •

includes:

www.eaglegrp.com

Splash-mount faucet w/wrist handles, mixer valve, c-fold towel dispenser in front, deck mount soap dispenser, skirt, basket drain.

Go Green. Go ECO-Built™ by Eagle. The advantages may be invisible. But when you see the tag you'll know the product you purchase has been produced in the Eagle plant, under the principles that drive the Eco-Built program. For restaurants and other institutions concerned about meeting their own green standards, buying Eco-Built is simply the right thing to do.

Look for the ECO-Built™ tag on the bar code

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

155


SINKS Catalog Section 20

Hand Sinks with Side Splashes see spec sheet

FEATURES:

• Standard with faucet and basket drain.

EG20.56

Freight class is 85.0. (•) MTS (made to stock) / ( ) MTO (made to order)

HSA-10-F-LRS •

list:

975

HSAN-10-F-LRS •

list: 1079

bowl size:

93⁄4˝ x 131⁄2˝ x 63⁄4˝ (248 x 343 x 173mm)

bowl size:

131⁄2˝ x 93⁄4˝ x 63⁄4˝ (343 x 248 x 173mm)

overall size:

143⁄4˝ x 187⁄8˝ x 123⁄4˝ (376 x 480 x 324mm)

overall size:

18˝ x 12˝ x 141⁄4˝ (457 x 305 x 362mm)

weight: cubic feet:

weight:

14 lbs., 6.4 kg 3.9

cubic feet:

includes: Faucet, basket drain, and side splashes.

HSA-10-FTWS-LRS

list: 1294

2.8

includes: 12˝ (305mm) side-to-side, faucet, basket drain, and side splashes.

HSA-10-FDPE-LRS

list: 3297

bowl size:

93⁄4˝ x 131⁄2˝ x 63⁄4˝ (248 x 343 x 173mm)

bowl size:

93⁄4˝ x 131⁄2˝ x 63⁄4˝ (248 x 343 x 173mm)

overall size:

143⁄4˝ x 187⁄8˝ x 123⁄4˝ (376 x 480 x 324mm)

overall size:

143⁄4˝ x 191⁄4˝ x 281⁄4˝ (376 x 489 x 718mm)

weight: cubic feet:

weight:

21 lbs., 9.5 kg 3.5

cubic feet:

includes: Faucet, tubular wall brackets, basket drain, and side splashes.

includes:

Go Green. Go ECO-Built™ by Eagle. The advantages may be invisible. But when you see the tag you'll know the product you purchase has been produced in the Eagle plant, under the principles that drive the Eco-Built program. For restaurants and other institutions concerned about meeting their own green standards, buying Eco-Built is simply the right thing to do.

Look for the ECO-Built™ tag on the bar code

156

13 lbs., 5.9 kg

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

31 lbs., 14.1 kg 2.8 Spout with electronic eye, towel dispenser, soap dispenser, basket drain, and side splashes.


SINKS Catalog Section 20

Space-Saver Series Hand Sinks see spec sheet

FEATURES:

• Standard with faucet and basket drain.

EG20.43

Freight class is 85.0. (•) MTS (made to stock) / ( ) MTO (made to order)

MICROGARD® an antimicrobial agent which contains built-in protection to retard the growth of a broad range of bacteria, mold and mildew on shelf surface that causes stains, odors and degradation.

HSAN-10-F•

list:

MICROGARD® available: To order, add suffix “-MG” to model # / add $110 to list price.

131⁄2˝ x 93⁄4˝ x 63⁄4˝ (343 x 248 x 171mm)

overall size:

18˝ x 12˝ x 141⁄4˝ (457 x 305 x 362mm)

overall size:

195⁄8˝ x 12˝ x 141⁄4˝ (498 x 305 x 362mm)

cubic feet:

weight:

12 lbs., 5.2 kg Only 12˝ (305mm) side-to-side to maximum space efficiency.

2.8

list:

12 lbs., 5.2 kg 2.8

includes: Deck mount faucet, basket drain.

775

bowl size:

131⁄2˝ x 93⁄4˝ x 63⁄4˝ (343 x 248 x 171mm)

overall size:

18˝ x 12˝ x 261⁄2˝ (457 x 305 x 673mm)

NEW

13 lbs., 5.8 kg 3.5

includes: Faucet, 191⁄2˝ (495mm) high backsplash, basket drain.

Portable Hand Sinks Sinks with Stainless* Steel Sink Bowl

portable hand sink with stainess steel sink bowl

FEATURES:

see spec sheet

cold water only hot & cold water

cubic feet:

includes: Splash mount faucet, basket drain.

cubic feet:

description

547

bowl size:

weight:

NEW

list:

131⁄2˝ x 93⁄4˝ x 63⁄4˝ (343 x 248 x 171mm)

HSANT-FS

191⁄2˝ (495mm) Backsplash and Skirt

HSAND-10-F •

bowl size:

weight: Only 12˝ (305mm) side-to-side to maximum space efficiency.

656

EG8120

Sinks with Designer** Acrylic Water Plate

Overall dimensions:

Overall dimensions:

24˝W x 26˝L x 443⁄4˝H (610 x 660 x 1136mm) weight*** lbs. kg model # list 110 49.9 PHS-S-C 4690 110 49.9 PHS-S-H 5790

24˝W x 26˝L x 443⁄16˝H (610 x 660 x 1122mm) weight*** lbs. kg model # list 155 70.3 PHS-A-C 5920 155 70.3 PHS-A-H 7020

* Features 14˝ x 16˝ x 5˝ stainless steel sink bowl with deck-mount faucet. ** Features 121⁄2˝ x 16˝ polycarbonate water plate which drains into a stainless steel trough, and deck-mount faucet. *** Weights shown reflect empty tanks.

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

portable hand sink with acrylic water plate

• Stainless steel cabinet with lockable door. • Stainless steel top features “v”-marine edge and rear backsplash. • 5-gallon fresh water tank, 7-gallon soiled water tank. • 24˝ (610mm) front-to-back, 26˝ (660mm) side-to-side. • 4˝ swivel casters—two with brake. • Towel rack. • Trash chute. • NEMA 5-15 plug & cord. Note: 2- and 3-bowl hand sinks available through SpecFAB®.

Freight class is 85.0. (•) MTS (made to stock) / ( ) MTO (made to order)

157


SINKS Catalog Section 20

Special Purpose Hand Sinks see spec sheets

EG20.20

EG20.36

FEATURES:

• Standard with faucet and basket drain.

EG20.37

Freight class is 85.0.

Hand Sink with Deck Mount Faucet

(•) MTS (made to stock) / ( ) MTO (made to order)

HSAD-10-F •

list:

509

bowl size:

93⁄4˝ x 131⁄2˝ x 63⁄4˝ (249 x 343 x 171mm)

overall size:

161⁄2˝ x 187⁄8˝ x 123⁄4˝ (419 x 479 x 324mm)

weight: cubic feet:

Designed for unique applications!

14 lbs., 6.4 kg 2.6

includes: Faucet and basket drain.

MICROGARD® an antimicrobial agent which contains built-in protection to retard the growth of a broad range of bacteria, mold and mildew on shelf surface that causes stains, odors and degradation.

Economical Hand Sink

Hand Sink with Waste Receptacle-Patent protected

• Faucet is splash mounted gooseneck.

• U.S. Patent #5,732,422. • Faucet is splash mounted gooseneck.

HSAE-10-FA •

list:

614

HSA-10-FDP-T

list: 1693

bowl size:

10˝ x 14˝ x 5˝ (254 x 356 x 127mm)

bowl size:

overall size:

15˝ x 163⁄4˝ x 9˝ (381 x 425 x 229mm)

overall size:

weight: cubic feet:

weight:

10 lbs., 4.5 kg 1.3

cubic feet:

includes: Faucet, basket drain, wall brackets, and 4˝ (102mm) high backsplash.

MICROGARD® available:

includes:

To order, add suffix “-MG” to model # / add $110 to list price.

93⁄4˝ x 131⁄2˝ x 63⁄4˝ (248 x 343 x 173mm) 143⁄4˝ x 191⁄4˝ x 445⁄8˝ (376 x 480 x 1133mm) 46 lbs., 20.9 kg 9.3 Faucet, basket drain, soap dispenser, towel dispenser, waste skirt, and waste receptacle.

Hand Sink with 8˝ (203mm) Centerline Faucet Holes

Hand Sink with 8˝ (203mm) Centerline Faucet

• Accommodates splash-mount faucet with 8˝ (203mm) centerline.

• Faucet is splash mounted gooseneck.

HSA-10-8

list:

158

list:

587

93⁄4˝ x 131⁄2˝ x 63⁄4˝ (248 x 343 x 173mm)

bowl size:

93⁄4˝ x 131⁄2˝ x 63⁄4˝ (248 x 343 x 173mm)

overall size:

143⁄4˝ x 187⁄8˝ x 123⁄4˝ (376 x 480 x 324mm)

overall size:

143⁄4˝ x 187⁄8˝ x 123⁄4˝ (376 x 480 x 324mm)

cubic feet:

To order, add suffix “-MG” to model # / add $110 to list price.

HSA-10-8F

bowl size:

weight:

MICROGARD® available:

457

weight:

10 lbs., 4.5 kg 2.8

cubic feet:

includes: 8˝ (203mm) centerline faucet holes (no faucet), basket drain

MICROGARD® available: To order, add suffix “-MG” to model # / add $110 to list price.

12 lbs., 5.2 kg 2.8

includes: Faucet on 8˝ (203mm) center, basket drain.

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


SINKS Catalog Section 20

Hand Sink Accessories - Faucets & Valves see spec sheet EG20.52A

FEATURES:

• All faucets below feature 4˝ (102mm) centers, except where noted. Note:

Faucets listed are lead-free AB1953-compliant.

Can be shipped UPS. (•) MTS (made to stock) / ( ) MTO (made to order)

splash mounted faucet

deck mounted faucet with 8˝ spout

Repair Kit for Standard faucets • For faucets #303987, 302004, and 301248 only.

deck mounted faucet

Standard Faucets

description

• With 4˝ (102mm) center, except #313075. description splash mounted, gooseneck spout wrist handles for faucet #303987 splash mounted with wrist handles, gooseneck spout deck mounted, gooseneck spout, 1/4-turn handles deck mounted, 8˝ (203mm) spout, 1/4-turn handles drinking bubbler splash mounted, gooseneck spout, 8˝ (203mm) center

model # 303987 307120 306495 302004 301248 318495 313075

list 153 96 317 168 151 534 148

consists of hot/cold stems, handles, seats, bonnet nuts, and O-rings

model # 303975

list 91

Spouts/Spout Assemblies description

model #

list

splash mounted replacement gooseneck for 120V AC electronic or pedal-operated models

312162

308

Battery-Powered Electronic-Eye Faucet • Used as a replacement to sinks on page 151 (by adding suffix “-B”), or as a replacement faucet for sinks on page 152 via the model number below.

T&S splash mounted faucet with wrist handles

description

T&S Extra Heavy Duty Faucets

OUR BEST

• Top quality faucets. description

splash mounted, gooseneck spout splash mounted, wrist handles, gooseneck spout

model # 306134 313305

list 493 491

model #

Splash mount. Comes with 6-volt battery 326014 and built-in low-battery indicator Upgrade: T&S electric-eye faucet, splash-mtd with battery and AC adapter for dual operation 356128 With AC adapter plugged in, faucet automatically switches to AC power to conserve battery

#356128

list 1443 1544

Faucet-Mount Emergency Eye Wash Unit • Fits in place of standard aerator on spout. • Comes with two dust covers. • Polished chrome finish.

Shut-Off Valve • Antibacterial surface. • Screws onto faucet aerator. • Polished chrome finish. description shut-off push bar

description pull valve activates fountain model # 349921

list 64

model # 326272

list 434

IMPORTANT NOTE: If anti-scald valve (see below) is needed, order #373848 only.

Anti-Scald Valve

Anti-Scald Valve for Faucet-Mount Emergency Eye Wash Unit

• Automatic shutdown with either hot or cold water failure. IMPORTANT: Not for use with #326272 Faucet-Mount Emergency Eye Wash Unit.

• This is the only anti-scald valve to be used with #326272 faucet-mount emergency eye wash unit (above). • Meets ANZI Z358.1 standard.

description ⁄2˝ (13mm) NPT, 100 - 145˚F

1

model # 326696

description list 577

⁄2˝ (13mm) NPT, 65 - 95˚F

1

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

model # 373848

list 1958

159


SINKS Catalog Section 20

Hand Sink Accessories - Valves

Can be shipped UPS.

see spec sheet EG20.52A

(•) MTS (made to stock) / ( ) MTO (made to order)

Temperature Adjustment Valve (“Mixing Valve”)

Tempering Valve

• For hand sinks with AC-powered electronic faucet or hand sinks with single pedal valves. • Cast brass body. • 3⁄8˝ (10mm) all connections.

• Maximum output of 120˚F. • Maximum pressure of 150 psi. • ASSE 1016 and 1070 listed.

description

model # 326015

built-in check valves to prevent backflow and adjustment screw valves to mix hot and cold

list 100

NEW

description

model #

list

thermoplastic body, 3⁄8˝ (10mm) male compression fittings, 80˚F-120˚F, 0.5-2.5 gpm, built-in check valve

375612

311

Non-Adjustable Y-Inlet Mixing Valve • For electronic hand sinks and hand sinks with single pedal valves only. • “Y” shaped single-piece component. Chrome-plated brass body. description

single foot pedal valve

Pedal Valves

model # 342938

Male connections; threads are 9⁄16-24 UNEF

list 29

knee pedal valve

description foot pedal valve, floor mount knee pedal valve

Hand Sink Accessories - Miscellaneous

DOUBLE PEDALS model # list 300604 343 313481 460

SINGLE PEDALS model # list 355994 343 351738 460

Can be shipped UPS.

see spec sheet EG20.52B

#318496 towel dispenser

double foot pedal valve

(•) MTS (made to stock) / ( ) MTO (made to order)

conventional soap dispenser soap dispenser with electric eye

#DP-10 towel dispenser #352854 towel dispenser

Towel/Soap Dispensers description type 304 with conventional soap dispenser type 304 stainless, with electric eye soap dispenser type 304 stainless, wall mounted break-resistant plastic, touchless, wall mounted

model # DP-10 *• DP-20 * 318496 352854

list 756 1571 264 350

deck mount soap dispenser

Soap Dispensers description soap dispenser, conventional soap dispenser, wall mounted with electric eye soap dispenser, deck-mount, 16-oz

model # 300602 359752 324074

list 28 202 111

nail brush

* Fits all HSA hand sinks except Space Saver models.

Hand Sanitizing Dispenser description Purell/TFX, wall mounted

model # 352852

list 76

tail piece, nickel-plated P-trap, nickel-plated

160

model # 300791 300789

list 15 83

nail brush holder

Nail Brush and Nail Brush Holder • To order nail brush and nail brush holder, add suffix “-NB” to hand sink model number. Example: HSA-10-F-NB .

tail piece

Plumbing description

hand sanitizing dispenser

P-trap

description

model #

infectious-control nail brush made of FDA-approved material, splash-mount stainless steel nail brush holder

add suffix “-NB”

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

list each 102


SINKS Catalog Section 20

Hand Sink Accessories - Miscellaneous

Can be shipped UPS.

see spec sheet EG20.52B

(•) MTS (made to stock) / ( ) MTO (made to order)

Waste Receptacle • • • • •

U.S. Patent #5,732,422. 20 gauge stainless steel. Removable. Comes with skirt. Must be factory installed.

Note:

ED PATENTGN DESI

To order, add suffix “-T” to hand sink model number. Example: HSA-10-F-T.

for models:

model # add suffix “-T”

HSA-10; HSA-10-F; HSA-10-FA; HSA-10-FDP; HSA-10-FE; HSA-10-FDPE; HSA-10-FDPEE; and HSA-10-FW

list 571

waste receptacle HSA-10-FDP-T hand sink with waste receptacle

End Splashes… • Type 304 stainless steel. Note: Will not work with Space Saver Hand Sinks (page 157) that have faucets with wrist handles.

…Factory-installed Notes: To order, add suffix “-LS” (left end splash), “-RS” (right end splash), or “-LRS” (both end splashes). Example: HSA-10-F-LRS. MICROGARD® cannot be put on hand sinks with end splashes.

descriptions

model # add suffix “-LS” add suffix “-RS” add suffix “-LRS”

left end splash only right end splash only left and right end splash

list 212 212 423

hand sink with optional end splashes

…for Field-installation descriptions

model #

one self-adhesive side splash, can be used for right or left application

HSA-SSK •

list each 135

pair of end splashes for field installation

Drains

description

Wall Brackets • 14 gauge type 304 stainless steel. descriptions side mounting, one pair, does not fit Space Saver models

model # 606396 •

list 198

wall bracket

Skirt Assembly • Type 304 stainless steel. fits models:

model # list

HSA-10; HSA-10-F; HSA-10-FA; HSA-10-FDP; HSA-10-FE; HSA-10-FDPE; HSA-10-FDPEE; 606215 • 446 and HSA-10-FW. HSAN-10-F 607560 316

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

polymer lever drain fits 31⁄2˝ (89mm) diameter holes overflow assembly for lever drain #319931 (above) 11⁄2˝ (38mm) drain assembly, fits 2˝ (51mm) dia. hole mini crumb cup for 11⁄2˝ (38mm) drain s/s basket drain assembly fits 31⁄2˝ (89mm) diameter holes w/crumb cups cast metal lever drain with overflow assembly, with 71⁄4˝ (185mm) long lever, fits 31⁄2˝ (89mm) diameter holes

maximum flow rate gallons gallons per minute per hour model # list 11 660 319931 72 -

-

319932

33

12

720

300886

12

-

-

300966

5

18

1080

300287

19

-

-

347771 189

161


SINKS Catalog Section 20

Hot Water Heater

• For Eagle hand sinks with 10˝ x 14˝ rounded bowl. • Stainless steel pedestal base features notches for electrical wiring and front access panel. • Unit comes equipped with an energy-saving tankless water heater. 120V 29A electricity. 0.5 GPM. • Water is heated instantaneously when faucet is turned on. • To order, add suffix “-WH” to model number and add $2105 to list price of hand sink. Example: HSA-10-FDPEE-WH FEATURES:

see spec sheet EG20.52B

with S ES TANKLE WAT RR HEATE

99% EFFICIENT! Flow switch activates heater only on demand —no standby heat loss. add list suffix # each

applicable hand sinks include:

HSA-10; HSA-10-F; HSA-10-FA; HSA-10-FDP; HSA-10-FE; HSA-10-FDPE; HSA-10-FDPEE; “-WH” HSA-10-FW; HSA-10-FA-P; and HSAD-10-F.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

2105

Lavatory Sinks see spec sheet

EG20.12

Replacements for Lavatory Sinks description splash mount spout drain assembly temperature adjustment valve, or “mixing valve”

to fit process sink model # P1916, P1916FE, W1916 P1916, P1916FE, W1916, P1916FE

W1916-FA •

list: 1354 bowl size:

wall mounted

model # 300600 300287 326015

list 174 19 100

FEATURES:

• • • • • •

A marine edge. Type 304 stainless steel sink bowl. Gooseneck spout. Soap dispenser. Basket drain. Wall mount and pedestal models available. Freight class is 85.0. (•) MTS (made to stock) / ( ) MTO (made to order)

P1916 •

153⁄4˝ x 193⁄4˝ x 87⁄8˝ (400 x 500 x 225mm)

bowl size:

23˝ x 245⁄16˝ (584 x 618mm)

overall size:

23˝ x 245⁄16˝ (571 x 618mm)

shipping wt:

35 lbs., 15.9 kg

shipping wt:

48 lbs., 21.8 kg

cubic feet:

pedestal mounted, foot pedal valve

1.6

W1916

list: 2593 bowl size:

cubic feet:

1.6

includes: Gooseneck spout, soap dispenser, pedestal with foot valves, basket drain.

P1916FE

153⁄4˝ x 193⁄4˝ x 87⁄8˝ (400 x 500 x 225mm)

list: 3056 bowl size:

153⁄4˝ x 193⁄4˝ x 87⁄8˝ (400 x 500 x 225mm)

overall size:

23˝ x 245⁄16˝ (571 x 618mm)

overall size:

23˝ x 245⁄16˝ (571 x 618mm)

shipping wt:

43 lbs., 19.5 kg

shipping wt:

48 lbs., 21.8 kg

cubic feet:

pedestal mounted, electronic-eye operation

1.6

includes: Gooseneck spout, soap dispenser, knee valves, basket drain.

162

153⁄4˝ x 193⁄4˝ x 87⁄8˝ (400 x 500 x 225mm)

overall size:

includes: Gooseneck faucet, soap dispenser, basket drain.

wall mounted, knee valve operation

list: 2282

cubic feet:

1.6

includes: Gooseneck spout with

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

electronic-eye operation, soap dispenser, pedestal, basket drain.


SINKS Catalog Section 20 2˝-wide euro-style edging on front and sides.

412, 414, and 314 Series Sinks Deep Drawn Construction

Sink Kits for 314, 412, and 414 Series Sinks see spec sheet EG20.51A

Standard Sink Kit components: Stainless steel gussets

lever drain (with Kit B)

Stainless steel crossbraced legs Stainless steel feet T&S faucet #313293

twist handle drain (with Kit D)

• Deep drawn seamless coved corner sink bowls of all units have a generous radius and are rectangular for maximum capacity. • Legs are galvanized, 15⁄8˝ (41mm) diameter and welded adjacent to sink bowl for maximum stability and support. • Crossbraced front-to-back with 1˝ (25mm) diameter galvanized tubing. • Leg gussets are welded to a die-cut heavygauge reinforcing plate. • 91⁄2˝ (241mm) standard backsplash includes 1˝ (25mm) upturn and tile edge for easy installation and feathering to wall/splash surface. • Basket-type waste drains are included to fit sink bowl’s 31⁄2˝ (89mm) opening and feature 11⁄2˝ (38mm) outlet. • 30˝ and 36˝ (762 and 914mm) drainboards available upon request. Note: Stainless steel legs with front-to-back crossbracing available (does not include stainless steel feet).

Kit A

Kit D

• Add suffix “-CLF” to sink model number.

• Standard sink kit components plus twist handle drain and twist handle bracket. Add suffix “-CLFDT” to sink model number.

description 1 faucet 2 faucets

add to list price 1077 1631

Kit B • Standard sink kit components plus lever drain. Add suffix “-CLFD” to sink model number. description 1 faucet 2 faucets per lever drain

add to list price 1077 1631 213

Kit C • Standard sink kit components plus lever drain with overflow. Add suffix “-CLFDO” to sink model number. add to description list price 1 faucet 1077 2 faucets 1631 per lever drain with overflow 438

description 1 faucet 2 faucets per twist handle drain

add to list price 1077 1631 225

Kit E • Standard sink kit components plus twist handle drain with overflow and twist handle bracket. Add suffix “-CLFDOT” to sink model number. add to list price 1077 1631 per twist handle drain with overflow 509 description 1 faucet 2 faucets

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

To order, add $331 to list price and suffix “-SL” to model number (example: 414-16-1-SL). To order stainless steel legs and gussets, add $459 to list price and suffix “-SLG” to model number (example: 414-16-1-SLG). Left-to-right crossbracing available. For galvanized, add 5% to list price and suffix “-CBG” to model number. For stainless steel (does not include stainless steel legs), add 10% to list price and suffix “-CBS” to model number (example: 414-16-1-CBS). Twist drain brackets available. Works in conjunction with optional twist handle drains (not included – see page 183). To order, add $27 per compartment to list price and suffix “-TB” to model number. Example: 414-16-1-TB. For overflow hole (does not include drain), add $40 per compartment to list price and suffix “-OF” to model number (example: 414-16-1-OF). Sink accessories, see pages 181-185. All shipping weights and cubic feet are approximate. ALL SINKS SHIPPED FULLY CRATED.

Freight class is 150.0.

163


SINKS Catalog Section 20

412, 414, and 314 Series Sinks One-Compartment Sinks see spec sheets

EG20.03

EG20.23

412 SERIES:

EG20.27

Deep Drawn Construction

414 SERIES:

2˝-wide euro-style edging

314 SERIES:

• All heavy gauge type 430 construction. • 101⁄2˝ (267mm) deep sink bowl. • 441⁄2˝ (1130mm) overall height. • 14˝ (356mm) deep heavy gauge type 304 sink bowl with type 430 drainboards, and backsplash. • 441⁄2˝ (1130mm) overall height. • All heavy gauge type 304 construction. • 14˝ (356mm) deep sink bowl. • 441⁄2˝ (1130mm) overall height. Freight class is 150.0. (•) MTS (made to stock) / ( ) MTO (made to order)

one-compartment sink with double drainboards

one-compartment sink with one drainboard

One Compartment, No Drainboards bowl size width x length in. mm 20˝ x 16˝ 24˝ x 18˝ 22˝ x 22˝ 24˝ x 24˝

508 x 406 610 x 457 559 x 559 610 x 610

drainboard length weight in. mm lbs. kg

cu ft

n/a n/a n/a n/a

10.5 10.0 14.5 16.5

n/a n/a n/a n/a

40 45 55 60

18.1 20.4 24.9 27.2

overall size width x length in. mm 271⁄2˝ x 231⁄4˝ 313⁄4˝ x 251⁄2˝ 293⁄4˝ x 291⁄2˝ 313⁄4˝ x 311⁄2˝

412 Series

414 Series

314 Series

- see spec sheet -

- see spec sheet -

- see spec sheet -

EG20.03

699 x 591 807 x 648 756 x 749 807 x 800

model # 412-16-1 • n/a n/a 412-24-1 •

bowl size width x length in. mm 20˝ x 16˝ 24˝ x 18˝ 22˝ x 22˝ 24˝ x 24˝

drainboard length weight in. mm lbs. kg

508 x 406 18˝ 24˝ 610 x 457 18˝ 24˝ 559 x 559 18˝ 24˝ 610 x 610 18˝ 24˝

457 610 457 610 457 610 457 610

59 65 64 70 74 80 79 85

26.8 29.5 29.0 31.8 33.6 36.3 35.8 38.6

cu ft 18.1 19.5 22.0 22.9 23.0 26.0 25.0 28.6

overall size width x length in. mm 271⁄2˝ x 387⁄8˝ 271⁄2˝ x 447⁄8˝ 313⁄4˝ x 403⁄4˝ 313⁄4˝ x 463⁄4˝ 293⁄4˝ x 45˝ 293⁄4˝ x 51˝ 313⁄4˝ x 463⁄4˝ 313⁄4˝ x 523⁄4˝

699 x 987 699 x 1140 807 x 1035 807 x 1188 756 x 1143 756 x 1295 807 x 1188 787 x 1340

One Compartment, Double Drainboards bowl size width x length in. mm 20˝ x 16˝ 24˝ x 18˝ 22˝ x 22˝ 24˝ x 24˝

164

drainboard length weight in. mm lbs. kg

508 x 406 18˝ 24˝ 610 x 457 18˝ 24˝ 559 x 559 18˝ 24˝ 610 x 610 18˝ 24˝

457 610 457 610 457 610 457 610

78 90 83 95 93 105 98 110

35.4 40.8 37.6 43.1 42.2 47.6 44.5 49.9

cu ft 25.7 30.8 29.6 38.1 30.3 37.1 32.5 40.6

overall size width x length in. mm 271⁄2˝ x 541⁄2˝ 271⁄2˝ x 661⁄2˝ 313⁄4˝ x 56˝ 313⁄4˝ x 68˝ 293⁄4˝ x 601⁄2˝ 293⁄4˝ x 721⁄2˝ 313⁄4˝ x 62˝ 313⁄4˝ x 74˝

699 x 1384 699 x 1689 807 x 1422 807 x 1727 756 x 1537 756 x 1842 807 x 1575 807 x 1880

EG20.23 list 1541 n/a n/a 2060

model # 414-16-1 • 414-18-1 • 414-22-1 • 414-24-1 •

EG20.27 list 1773 2076 2207 2239

model # 314-16-1 • 314-18-1 314-22-1 314-24-1

list 2005 2321 2334 2493

BEST

BETTER

GOOD One Compartment, One Drainboard (right or left)

BEST

BETTER

GOOD

412 Series

414 Series

314 Series

- see spec sheet -

- see spec sheet -

- see spec sheet -

EG20.03 model # 412-16-1-18R or L • 412-16-1-24R or L n/a n/a n/a n/a 412-24-1-18R or L 412-24-1-24R or L

EG20.23 list 2163 2181 n/a n/a n/a n/a 2927 2987

model # 414-16-1-18R or L • 414-16-1-24R or L • 414-18-1-18R or L 414-18-1-24R or L 414-22-1-18R or L 414-22-1-24R or L 414-24-1-18R or L 414-24-1-24R or L •

EG20.27 list 2429 2459 2814 2834 3074 3094 3226 3260

model # 314-16-1-18R or L 314-16-1-24R or L• 314-18-1-18R or L 314-18-1-24R or L 314-22-1-18R or L 314-22-1-24R or L 314-24-1-18R or L 314-24-1-24R or L

list 2693 2726 3095 3117 3185 3207 3511 3563

GOOD

BETTER

BEST

412 Series

414 Series

314 Series

- see spec sheet -

- see spec sheet -

- see spec sheet -

EG20.03 model # 412-16-1-18 • 412-16-1-24 n/a n/a n/a n/a 412-24-1-18 412-24-1-24

EG20.23 list 2294 2300 n/a n/a n/a n/a 3118 3181

model # 414-16-1-18 414-16-1-24 414-18-1-18 414-18-1-24 414-22-1-18 414-22-1-24 414-24-1-18 414-24-1-24

EG20.27 list 2543 2626 2905 2932 3181 3208 3358 3409

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

model # 314-16-1-18 314-16-1-24 314-18-1-18 314-18-1-24 314-22-1-18 314-22-1-24 314-24-1-18 314-24-1-24

list 2814 2899 3192 3219 3292 3319 3593 3721


SINKS Catalog Section 20

412, 414, and 314 Series Sinks Two-Compartment Sinks see spec sheets

EG20.03

EG20.24

412 SERIES:

EG20.28

Deep Drawn Construction

414 SERIES:

2˝-wide euro-style edging

314 SERIES:

• All heavy gauge type 430 construction. • 101⁄2˝ (267mm) deep sink bowl. • 441⁄2˝ (1130mm) overall height. • 14˝ (356mm) deep heavy gauge type 304 sink bowl with type 430 drainboards, and backsplash. • 441⁄2˝ (1130mm) overall height. • All heavy gauge type 304 construction. • 14˝ (356mm) deep sink bowl. • 441⁄2˝ (1130mm) overall height. Freight class is 150.0. (•) MTS (made to stock) / ( ) MTO (made to order)

two-compartment sink with double drainboards

two-compartment sink with no drainboards

Two Compartments, No Drainboards bowl size width x length in. mm 20˝ x 16˝ 24˝ x 18˝ 22˝ x 22˝ 24˝ x 24˝

508 x 406 610 x 457 559 x 559 610 x 610

drainboard length weight in. mm lbs. kg

cu ft

n/a n/a n/a n/a

18.1 24.0 25.8 29.6

n/a n/a n/a n/a

64 75 80 90

29.0 33.8 36.3 40.8

overall size width x length in. mm 271⁄2˝ x 41˝ 313⁄4˝ x 451⁄2˝ 293⁄4˝ x 531⁄2˝ 313⁄4˝ x 571⁄2˝

699 x 1041 807 x 1156 756 x 1359 807 x 1461

412 Series

414 Series

314 Series

- see spec sheet -

- see spec sheet -

- see spec sheet -

EG20.03

EG20.24

model # 412-16-2 • n/a n/a 412-24-2

bowl size width x length in. mm 20˝ x 16˝ 24˝ x 18˝ 22˝ x 22˝ 24˝ x 24˝

drainboard length weight in. mm lbs. kg

508 x 406 18˝ 24˝ 610 x 457 18˝ 24˝ 559 x 559 18˝ 24˝ 610 x 610 18˝ 24˝

457 610 457 610 457 610 457 610

83 89 94 100 99 105 109 115

37.6 40.4 42.6 45.4 44.9 47.6 49.4 52.2

cu ft 25.7 28.3 33.0 35.0 34.0 37.1 38.0 41.6

overall size width x length in. mm 271⁄2˝ x 565⁄8˝ 271⁄2˝ x 625⁄8˝ 313⁄4˝ x 603⁄4˝ 313⁄4˝ x 663⁄4˝ 293⁄4˝ x 69˝ 293⁄4˝ x 75˝ 313⁄4˝ x 723⁄4˝ 313⁄4˝ x 783⁄4˝

699 x 1438 699 x 1591 807 x 1543 807 x 1696 756 x 1753 756 x 1905 807 x 1847 807 x 2000

Two Compartments, Double Drainboards bowl size width x length in. mm 20˝ x 16˝ 24˝ x 18˝ 22˝ x 22˝ 24˝ x 24˝

drainboard length weight in. mm lbs. kg

508 x 406 18˝ 24˝ 610 x 457 18˝ 24˝ 559 x 559 18˝ 24˝ 610 x 610 18˝ 24˝

457 610 457 610 457 610 457 610

102 114 113 125 118 130 128 140

46.3 51.7 51.3 56.7 53.5 59.0 58.1 63.5

cu ft 32.8 38.5 43.8 48.7 42.0 48.5 47.0 53.6

overall size width x length in. mm 271⁄2˝ x 721⁄4˝ 271⁄2˝ x 841⁄4˝ 313⁄4˝ x 76˝ 313⁄4˝ x 88˝ 293⁄4˝ x 841⁄2˝ 293⁄4˝ x 961⁄2˝ 313⁄4˝ x 88˝ 313⁄4˝ x 100˝

699 x 1848 660 x 2140 807 x 1930 807 x 2235 756 x 2146 756 x 2451 807 x 2235 807 x 2540

list model # 2109 414-16-2 • n/a 414-18-2 • n/a 414-22-2 3101 414-24-2 •

EG20.28 list 2428 2794 3049 3369

model # 314-16-2 • 314-18-2 314-22-2 314-24-2 •

list 2692 3227 3324 3828

BEST

BETTER

GOOD Two Compartments, One Drainboard (right or left)

BEST

BETTER

GOOD

412 Series

414 Series

314 Series

- see spec sheet -

- see spec sheet -

- see spec sheet -

EG20.03 model # 412-16-2-18R or L • 412-16-2-24R or L n/a n/a n/a n/a 412-24-2-18R or L 412-24-2-24R or L

EG20.24 list 2796 2824 n/a n/a n/a n/a 4160 4245

model # 414-16-2-18R or L • 414-16-2-24R or L • 414-18-2-18R or L 414-18-2-24R or L 414-22-2-18R or L 414-22-2-24R or L 414-24-2-18R or L 414-24-2-24R or L •

EG20.28 list 3213 3262 3752 3775 4176 4199 4532 4631

model # 314-16-2-18R or L 314-16-2-24R or L 314-18-2-18R or L 314-18-2-24R or L 314-22-2-18R or L 314-22-2-24R or L 314-24-2-18R or L 314-24-2-24R or L

list 3514 3715 4228 4252 4434 4457 4925 5253

GOOD

BETTER

BEST

412 Series

414 Series

314 Series

- see spec sheet -

- see spec sheet -

- see spec sheet -

EG20.03 model # 412-16-2-18 • 412-16-2-24 n/a n/a n/a n/a 412-24-2-18 412-24-2-24

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

EG20.24 list 2888 2933 n/a n/a n/a n/a 4305 4393

model # 414-16-2-18 • 414-16-2-24 • 414-18-2-18 414-18-2-24 414-22-2-18 414-22-2-24 414-24-2-18 414-24-2-24 •

EG20.28 list 3338 3399 3864 3907 4308 4358 4682 4828

model # 314-16-2-18 314-16-2-24 314-18-2-18 314-18-2-24 314-22-2-18 314-22-2-24 314-24-2-18 314-24-2-24

list 3794 3858 4347 4392 4566 4614 5129 5355

165


SINKS Catalog Section 20

412, 414, and 314 Series Sinks Three-Compartment Sinks see spec sheets

EG20.03

EG20.25

412 SERIES:

EG20.29

Deep Drawn Construction

414 SERIES:

314 SERIES:

2˝-wide euro-style edging

• All heavy gauge type 430 construction. • 101⁄2˝ (267mm) deep sink bowls. • 441⁄2˝ (1130mm) overall height. • 14˝ (356mm) deep heavy gauge type 304 sink bowls with type 430 drainboards, and backsplash. • 441⁄2˝ (1130mm) overall height. • All heavy gauge type 304 construction. • 14˝ (356mm) deep sink bowls. • 441⁄2˝ (1130mm) overall height. Freight class is 150.0. (•) MTS (made to stock) / ( ) MTO (made to order)

three-compartment sink with no drainboards

three-compartment sink with double drainboards (faucet not included)

Three Compartments, No Drainboards bowl size width x length in. mm

drainboard length weight in. mm lbs. kg

20˝ x 16˝ 508 x 406 n/a 24˝ x 18˝ 610 x 457 n/a 22˝ x 22˝ 559 x 559 n/a 24˝ x 24˝ 610 x 610 n/a * Features two sets of faucet holes.

n/a n/a n/a n/a

85 114 120 125

38.6 51.7 54.4 56.7

cu ft 25.7 33.0 37.1 41.5

overall size width x length in. mm 271⁄2˝ x 583⁄4˝ 313⁄4˝ x 651⁄2˝ 293⁄4˝ x 771⁄2˝ 313⁄4˝ x 831⁄2˝

Three Compartments, One Drainboard (right or left) bowl size width x length in. mm

drainboard length weight in. mm lbs. kg

20˝ x 16˝

508 x 406 18˝ 457 24˝ 610 24˝ x 18˝ 610 x 457 18˝ 457 24˝ 610 22˝ x 22˝ 559 x 559 18˝ 457 24˝ 610 24˝ x 24˝ 610 x 610 18˝ 457 24˝ 610 * Features two sets of faucet holes.

104 110 133 139 139 145 144 150

47.2 49.9 60.3 63.1 63.1 65.8 65.3 68.0

overall size width x length in. mm

cu ft 33.3 35.8 42.0 68.0 45.0 48.4 50.0 54.6

271⁄2˝ x 743⁄8˝ 271⁄2˝ x 803⁄8˝ 313⁄4˝ x 803⁄4˝ 313⁄4˝ x 863⁄4˝ 293⁄4˝ x 93˝ 293⁄4˝ x 99˝ 313⁄4˝ x 983⁄4˝ 313⁄4˝ x 1043⁄4˝

699 x 1889 699 x 2042 807 x 2051 807 x 2203 756 x 2362 756 x 2515 807 x 2508 807 x 2661

412 Series

414 Series

314 Series

- see spec sheet -

- see spec sheet -

- see spec sheet -

EG20.03

699 x 1492 807 x 1664 756 x 1969 807 x 2121

model # 412-16-3 • n/a n/a 412-24-3 *

bowl size width x length in. mm 20˝ x 16˝

drainboard length weight in. mm lbs. kg

508 x 406 18˝ 457 24˝ 610 24˝ x 18˝ 610 x 457 18˝ 457 24˝ 610 22˝ x 22˝ 559 x 559 18˝ 457 24˝ 610 24˝ x 24˝ 610 x 610 18˝ 457 24˝ 610 * Features two sets of faucet holes.

166

123 135 152 164 158 170 163 175

55.8 61.2 68.9 74.4 71.6 77.1 73.9 79.4

cu ft 40.9 46.0 50.5 57.0 54.0 59.6 60.0 65.2

overall size width x length in. mm 271⁄2˝ x 90˝ 271⁄2˝ x 102˝ 313⁄4˝ x 96˝ 313⁄4˝ x 108˝ 293⁄4˝ x 1081⁄2˝ 293⁄4˝ x 1201⁄2˝ 313⁄4˝ x 114˝ 313⁄4˝ x 126˝

699 x 2286 699 x 2591 807 x 2438 807 x 2743 756 x 2756 756 x 3061 807 x 2896 807 x 3200

EG20.25 list 2674 n/a n/a 4062

model # 414-16-3 • 414-18-3 *• 414-22-3 * 414-24-3 *•

EG20.29 list 2943 3637 4041 4411

model # 314-16-3 • 314-18-3 * 314-22-3 * 314-24-3 *

list 3367 4260 4462 4974

GOOD

BETTER

BEST

412 Series

414 Series

314 Series

- see spec sheet -

- see spec sheet -

- see spec sheet -

EG20.03 model # 412-16-3-18R or L • 412-16-3-24R or L n/a n/a n/a n/a 412-24-3-18R or L * 412-24-3-24R or L *

EG20.25 list 2826 2855 n/a n/a n/a n/a 5306 5415

model # 414-16-3-18R or L• 414-16-3-24R or L 414-18-3-18R or L* 414-18-3-24R or L* 414-22-3-18R or L* 414-22-3-24R or L* 414-24-3-18R or L* 414-24-3-24R or L*•

EG20.29 list 3723 3751 4676 4695 5262 5282 5815 5897

model # 314-16-3-18R or L 314-16-3-24R or L 314-18-3-18R or L* 314-18-3-24R or L* 314-22-3-18R or L* 314-22-3-24R or L* 314-24-3-18R or L* 314-24-3-24R or L*

list 4521 4551 5346 5364 5665 5687 6358 6624

BEST

BETTER

GOOD Three Compartments, Double Drainboards

BEST

BETTER

GOOD

412 Series

414 Series

314 Series

- see spec sheet -

- see spec sheet -

- see spec sheet -

EG20.03 model # 412-16-3-18 • 412-16-3-24 • n/a n/a n/a n/a 412-24-3-18 * 412-24-3-24 *•

EG20.25 list 2925 2975 n/a n/a n/a n/a 5425 5536

model # 414-16-3-18 • 414-16-3-24 • 414-18-3-18 *• 414-18-3-24 *• 414-22-3-18 *• 414-22-3-24 *• 414-24-3-18 *• 414-24-3-24 *•

EG20.29 list 3824 3882 4798 4917 5406 5545 5819 6076

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

model # 314-16-3-18 • 314-16-3-24 • 314-18-3-18 *• 314-18-3-24 *• 314-22-3-18 * 314-22-3-24 *• 314-24-3-18 * 314-24-3-24 *

list 4631 4696 5475 5596 5806 5945 6302 6812


SINKS Catalog Section 20

414 and 314 Series Sinks Four-Compartment Sinks see spec sheets

EG20.26

EG20.30

Deep Drawn Construction

414 SERIES:

314 SERIES:

• 14˝ (356mm) deep heavy gauge type 304 sink bowls with type 430 drainboards, and backsplash. • 441⁄2˝ (1130mm) overall height. • Two sets of faucet holes. • • • •

All heavy gauge type 304 construction. 14˝ (356mm) deep sink bowls. 441⁄2˝ (1130mm) overall height. Two sets of faucet holes. Freight class is 150.0. (•) MTS (made to stock) / ( ) MTO (made to order)

four-compartment sink with double drainboards

2˝-wide euro-style edging BEST

BETTER Four Compartments, No Drainboards bowl size width x length in. mm 20˝ x 16˝ 24˝ x 18˝ 24˝ x 24˝

508 x 406 610 x 457 610 x 610

drainboard length weight in. mm lbs. kg

cu ft

n/a n/a n/a

33.3 48.4 55.6

n/a n/a n/a

125 135 153

56.7 61.2 69.4

overall size width x length in. mm 271⁄2˝ x 761⁄2˝ 313⁄4˝ x 851⁄2˝ 313⁄4˝ x 1091⁄2˝

699 x 1943 807 x 2172 807 x 2783

Four Compartments, One Drainboard (right or left) bowl size width x length in. mm 20˝ x 16˝

508 x 406

24˝ x 18˝

610 x 457

24˝ x 24˝

610 x 610

drainboard length weight in. mm lbs. kg

cu ft

18˝ 24˝ 18˝ 24˝ 18˝ 24˝

41.0 43.4 49.0 59.6 61.0 67.7

457 610 457 610 457 610

144 150 154 160 172 178

65.3 68.0 69.9 72.6 78.0 80.7

overall size width x length in. mm 271⁄2˝ x 921⁄8˝ 271⁄2˝ x 981⁄8˝ 313⁄4˝ x 1003⁄4˝ 313⁄4˝ x 1063⁄4˝ 313⁄4˝ x 1243⁄4˝ 313⁄4˝ x 1303⁄4˝

699 x 2340 699 x 2492 807 x 2559 807 x 2711 807 x 3169 807 x 3321

414 Series

314 Series

- see spec sheet -

- see spec sheet -

EG20.26 model # 414-16-4 414-18-4 414-24-4

EG20.30 list 3973 4592 5661

model # 314-16-4 314-18-4 314-24-4

BETTER

BEST

414 Series

314 Series

- see spec sheet -

- see spec sheet -

EG20.26 model # 414-16-4-18R or L 414-16-4-24R or L 414-18-4-18R or L 414-18-4-24R or L 414-24-4-18R or L 414-24-4-24R or L

EG20.30 list 4829 4860 5799 5948 6956 7484

bowl size width x length in. mm 20˝ x 16˝

508 x 406

24˝ x 18˝

610 x 457

24˝ x 24˝

610 x 610

drainboard length weight in. mm lbs. kg

cu ft

18˝ 24˝ 18˝ 24˝ 18˝ 24˝

48.5 53.6 65.0 70.9 73.0 79.7

457 610 457 610 457 610

163 175 173 185 191 203

73.9 79.5 78.5 83.9 86.6 92.1

overall size width x length in. mm 271⁄2˝ x 1073⁄4˝ 271⁄2˝ x 1193⁄4˝ 313⁄4˝ x 116˝ 313⁄4˝ x 128˝ 313⁄4˝ x 140˝ 313⁄4˝ x 152˝

699 x 2737 699 x 3042 807 x 2946 807 x 3251 807 x 3556 807 x 3861

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

model # 314-16-4-18R or L 314-16-4-24R or L 314-18-4-18R or L 314-18-4-24R or L 314-24-4-18R or L 314-24-4-24R or L

414 Series

314 Series

- see spec sheet -

- see spec sheet -

EG20.26 model # 414-16-4-18 • 414-16-4-24 414-18-4-18 414-18-4-24 414-24-4-18 414-24-4-24 •

list 5658 5692 6647 6669 8042 8436

BEST

BETTER Four Compartments, Double Drainboards

list 4759 5406 6526

EG20.30 list 5028 5104 5893 5962 7320 7653

model # 314-16-4-18 314-16-4-24 314-18-4-18 314-18-4-24 314-24-4-18 314-24-4-24

list 5864 5945 6767 6842 8212 8611

167


SINKS Catalog Section 20

SPEC-MASTER® FN Series Coved Corner Sinks

One-Compartment Sinks see spec sheet

EG20.32

The Consultant’s Choice

FEATURES:

• 14 gauge type 304 18-8 stainless steel. • All bowls are 14˝ (356mm) deep and have 5 ⁄8˝ (16mm) radius corners, both vertical and horizontal. • Stainless steel gussets, feet, legs and crossbracing. • Adjustable crossbracing front-to-back and side-to-side for increased stability. • 91⁄2˝ (241mm) standard backsplash includes 1˝ (25mm) upturn and tile edge. • Basket-type waste drains are included to fit sink bowl’s 31⁄2˝ (89mm) opening and feature 11⁄2˝ (38mm) outlet. • 30˝ and 36˝ (762 and 914mm) drainboards available upon request. Note:

Notes: Twist drain brackets available. Works in conjunction with optional twist handle drains (not included – see page 183). To order, add $27 per compartment to list price and suffix “-TB” to model number (example: FN2016-1-14/3-TB).

All shipping weights and cubic feet are approximate. ALL SINKS SHIPPED FULLY CRATED. For sink accessories, see pages 181-185. For sink kits, see page 163.

For overflow hole (does not include drain), add $40 per compartment to list price and suffix “-OF” to model number (example: FN2016-1-14/3-OF).

Freight class is 150.0. (•) MTS (made to stock) / ( ) MTO (made to order)

One Compartment, No Drainboards bowl size width x length in. mm 20˝ x 16˝ 20˝ x 18˝ 20˝ x 20˝ 24˝ x 24˝ 28˝ x 20˝

508 x 406 508 x 457 508 x 508 610 x 610 711 x 508

drainboard length weight in. mm lbs. kg n/a n/a n/a n/a n/a

n/a n/a n/a n/a n/a

55 58 60 69 79

cubic feet

24.9 26.3 27.2 31.2 35.8

10.1 11.9 12.9 17.8 16.7

overall size width x length in. mm 27˝ x 21˝ 27˝ x 23˝ 27˝ x 25˝ 31˝ x 29˝ 35˝ x 25˝

686 x 533 686 x 584 686 x 635 787 x 737 889 x 635

model # FN2016-1-14/3 FN2018-1-14/3 • FN2020-1-14/3 FN2424-1-14/3 FN2820-1-14/3

list 2660 2996 2996 3209 3539

One Compartment, One Drainboard (right or left) bowl size width x length in. mm 20˝ x 16˝

508 x 406

20˝ x 18˝

508 x 457

20˝ x 20˝ 24˝ x 24˝ 28˝ x 20˝

508 x 508 610 x 610 711 x 508

drainboard length weight in. mm lbs. kg 18˝ 24˝ 18˝ 24˝ 24˝ 24˝ 24˝

457 610 457 610 610 610 610

74 80 76 81 85 88 104

cubic feet

30.8 33.1 34.4 36.7 37.2 37.6 43.1

18.7 21.5 20.3 22.4 23.4 30.5 30.2

overall size width x length in. mm 27˝ x 371⁄2˝ 27˝ x 431⁄2˝ 27˝ x 391⁄2˝ 27˝ x 451⁄2˝ 27˝ x 471⁄2˝ 31˝ x 511⁄2˝ 35˝ x 471⁄2˝

686 x 953 686 x 1105 686 x 1003 686 x 1156 686 x 1207 787 x 1308 889 x 1207

model # FN2016-1-18R or L-14/3 FN2016-1-24R or L-14/3 FN2018-1-18R or L-14/3 FN2018-1-24R or L-14/3 FN2020-1-24R or L-14/3 FN2424-1-24R or L-14/3 FN2820-1-24R or L-14/3

list 2831 2879 3105 3158 3158 3691 3612

model # FN2016-1-18-14/3 FN2016-1-24-14/3 FN2018-1-18-14/3 FN2018-1-24-14/3 FN2020-1-24-14/3 FN2424-1-24-14/3 FN2820-1-24-14/3

list 2942 3058 3231 3333 3333 3861 3823

One Compartment, Double Drainboards bowl size width x length in. mm 20˝ x 16˝

508 x 406

20˝ x 18˝

508 x 457

20˝ x 20˝ 24˝ x 24˝ 28˝ x 20˝

508 x 508 610 x 610 711 x 508

168

drainboard length weight in. mm lbs. kg 18˝ 24˝ 18˝ 24˝ 24˝ 24˝ 24˝

457 610 457 610 610 610 610

93 105 96 106 110 119 129

37.6 42.1 43.5 48.1 48.5 49.0 55.3

cubic feet 26.3 32.0 28.7 32.9 33.9 43.9 43.8

overall size width x length in. mm 27˝ x 54˝ 27˝ x 66˝ 27˝ x 56˝ 27˝ x 68˝ 27˝ x 70˝ 31˝ x 74˝ 35˝ x 70˝

686 x 1372 686 x 1676 686 x 1422 686 x 1727 686 x 1778 787 x 1880 889 x 1778

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


SINKS Catalog Section 20

SPEC-MASTER® FN Series Coved Corner Sinks

Two-Compartment Sinks see spec sheet

EG20.33

The Consultant’s Choice

(faucet not included)

FEATURES:

• 14 gauge type 304 18-8 stainless steel. • All bowls are 14˝ (356mm) deep and have 5 ⁄8˝ (16mm) radius corners, both vertical and horizontal. • Stainless steel gussets, feet, legs and crossbracing. • Adjustable crossbracing front-to-back and side-to-side for increased stability. • 91⁄2˝ (241mm) standard backsplash includes 1˝ (25mm) upturn and tile edge. • Basket-type waste drains are included to fit sink bowl’s 31⁄2˝ (89mm) opening and feature 11⁄2˝ (38mm) outlet. • 30˝ and 36˝ (762 and 914mm) drainboards available upon request. Note:

Notes: Twist drain brackets available. Works in conjunction with optional twist handle drains (not included – see page 183). To order, add $27 per compartment to list price and suffix “-TB” to model number (example: FN2032-2-14/3-TB).

All shipping weights and cubic feet are approximate. ALL SINKS SHIPPED FULLY CRATED. For sink accessories, see pages 181-185. For sink kits, see page 163.

For overflow hole (does not include drain), add $40 per compartment to list price and suffix “-OF” to model number (example: FN2032-2-14/3-OF).

Freight class is 150.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Two Compartments, No Drainboards bowl size width x length in. mm 20˝ x 16˝ 20˝ x 18˝ 20˝ x 20˝ 24˝ x 24˝ 28˝ x 20˝

508 x 406 508 x 457 508 x 508 610 x 610 711 x 508

drainboard length weight in. mm lbs. kg n/a n/a n/a n/a n/a

n/a n/a n/a n/a n/a

77 82 86 91 96

34.9 37.2 39.0 41.3 43.6

cubic feet 20.4 22.4 23.9 32.2 31.3

overall size width x length in. mm 27˝ x 39˝ 27˝ x 43˝ 27˝ x 47˝ 31˝ x 55˝ 35˝ x 47˝

686 x 991 686 x 1092 686 x 1194 787 x 1397 889 x 1194

model # FN2032-2-14/3 FN2036-2-14/3 FN2040-2-14/3 FN2448-2-14/3 FN2840-2-14/3

list 3557 3905 3905 4644 4652

Two Compartments, One Drainboard (right or left) bowl size width x length in. mm 20˝ x 16˝

508 x 406

20˝ x 18˝

508 x 457

20˝ x 20˝ 24˝ x 24˝ 28˝ x 20˝

508 x 508 610 x 610 711 x 508

drainboard length weight in. mm lbs. kg 18˝ 24˝ 18˝ 24˝ 24˝ 24˝ 24˝

457 610 457 610 610 610 610

96 102 101 107 111 116 121

43.6 46.3 45.8 48.5 50.3 52.6 54.9

cubic feet 28.2 31.1 30.6 33.1 35.0 45.0 45.0

overall size width x length in. mm 27˝ x 551⁄2˝ 27˝ x 611⁄2˝ 27˝ x 591⁄2˝ 27˝ x 651⁄2˝ 27˝ x 691⁄2˝ 31˝ x 771⁄2˝ 35˝ x 691⁄2˝

686 x 1410 686 x 1562 686 x 1511 686 x 1664 686 x 1763 787 x 1969 889 x 1763

model # FN2032-2-18R or L-14/3 FN2032-2-24R or L-14/3 FN2036-2-18R or L-14/3 FN2036-2-24R or L-14/3 FN2040-2-24R or L-14/3 FN2448-2-24R or L-14/3 FN2840-2-24R or L-14/3

list 3823 3889 4324 4378 4378 5266 5266

Two Compartments, Double Drainboards bowl size width x length in. mm 20˝ x 16˝

508 x 406

20˝ x 18˝

508 x 457

20˝ x 20˝ 24˝ x 24˝ 28˝ x 20˝

508 x 508 610 x 610 711 x 508

drainboard length weight in. mm lbs. kg 18˝ 24˝ 18˝ 24˝ 24˝ 24˝ 24˝

457 610 457 610 610 610 610

115 127 120 132 136 141 146

52.2 57.6 54.4 59.9 61.7 64.0 66.2

cubic feet 36.0 41.8 39.4 43.8 45.7 58.4 58.8

overall size width x length in. mm 27˝ x 72˝ 27˝ x 84˝ 27˝ x 76˝ 27˝ x 88˝ 27˝ x 92˝ 31˝ x 100˝ 35˝ x 92˝

686 x 1829 686 x 2134 686 x 1930 686 x 2235 686 x 2337 787 x 2540 889 x 2337

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

model # FN2032-2-18-14/3 FN2032-2-24-14/3 FN2036-2-18-14/3 • FN2036-2-24-14/3 FN2040-2-24-14/3 FN2448-2-24-14/3 FN2840-2-24-14/3

list 3956 4052 4240 4538 4538 5491 5454

169


SINKS Catalog Section 20

SPEC-MASTER® FN Series Coved Corner Sinks

Three-Compartment Sinks see spec sheet

EG20.34

The Consultant’s Choice

(faucets not included)

FEATURES:

• 14 gauge type 304 18-8 stainless steel. • All bowls are 14˝ (356mm) deep and have 5 ⁄8˝ (16mm) radius corners, both vertical and horizontal. • Stainless steel gussets, feet, legs and crossbracing. • Adjustable crossbracing front-to-back and side-to-side for increased stability. • 91⁄2˝ (241mm) standard backsplash includes 1˝ (25mm) upturn and tile edge. • Basket-type waste drains are included to fit sink bowls’ 31⁄2˝ (89mm) opening and feature 11⁄2˝ (38mm) outlet. • 30˝ and 36˝ (762 and 914mm) drainboards available upon request. Note:

Notes: Twist drain brackets available. Works in conjunction with optional twist handle drains (not included – see page 183). To order, add $27 per compartment to list price and suffix “-TB” to model number (example: FN2048-3-14/3-TB).

All shipping weights and cubic feet are approximate. ALL SINKS SHIPPED FULLY CRATED. For sink accessories, see pages 181-185. For sink kits, see page 163.

For overflow hole (does not include drain), add $40 per compartment to list price and suffix “-OF” to model number (example: FN2048-3-14/3-OF).

Freight class is 150.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Three Compartments, No Drainboards bowl size width x length in. mm 20˝ x 16˝ 20˝ x 18˝ 20˝ x 20˝ 24˝ x 24˝ 28˝ x 20˝

508 x 406 508 x 457 508 x 508 610 x 610 711 x 508

drainboard length weight in. mm lbs. kg n/a n/a n/a n/a n/a

n/a n/a n/a n/a n/a

99 102 114 127 130

44.9 46.3 51.7 57.6 59.0

cubic feet 29.2 32.1 35.0 46.7 45.0

overall size width x length in. mm 27˝ x 57˝ 27˝ x 63˝ 27˝ x 69˝ 31˝ x 81˝ 35˝ x 69˝

686 x 1448 686 x 1600 686 x 1753 787 x 2057 889 x 1753

model # FN2048-3-14/3 FN2054-3-14/3 * FN2060-3-14/3 * FN2472-3-14/3 * FN2860-3-14/3 *

list 4397 5027 5027 5847 6022

* Features two sets of faucet holes.

Three Compartments, One Drainboard (right or left) bowl size width x length in. mm 20˝ x 16˝

508 x 406

20˝ x 18˝

508 x 457

20˝ x 20˝ 24˝ x 24˝ 28˝ x 20˝

508 x 508 610 x 610 711 x 508

drainboard length weight in. mm lbs. kg 18˝ 24˝ 18˝ 24˝ 24˝ 24˝ 24˝

457 610 457 610 610 610 610

118 124 121 127 139 152 155

53.5 56.2 54.9 57.6 63.1 68.9 70.3

cubic feet 36.9 39.9 40.4 42.8 45.7 59.5 58.8

overall size width x length in. mm 27˝ x 731⁄2˝ 27˝ x 791⁄2˝ 27˝ x 791⁄2˝ 27˝ x 851⁄2˝ 27˝ x 911⁄2˝ 31˝ x 1031⁄2˝ 35˝ x 911⁄2˝

686 x 1867 686 x 2019 686 x 2019 686 x 2172 686 x 2324 787 x 2629 889 x 2324

model # FN2048-3-18R or L-14/3 FN2048-3-24R or L-14/3 FN2054-3-18R or L-14/3 * FN2054-3-24R or L-14/3 * FN2060-3-24R or L-14/3 * FN2472-3-24R or L-14/3 * FN2860-3-24R or L-14/3 *

list 4580 4627 5402 5439 5439 6612 6732

* Features two sets of faucet holes.

Three Compartments, Double Drainboards bowl size width x length in. mm 20˝ x 16˝

508 x 406

20˝ x 18˝

508 x 457

20˝ x 20˝ 24˝ x 24˝ 28˝ x 20˝

508 x 508 610 x 610 711 x 508

170

drainboard length weight in. mm lbs. kg 18˝ 24˝ 18˝ 24˝ 24˝ 24˝ 24˝

457 610 457 610 610 610 610

137 149 140 158 164 177 180

61.7 67.6 63.5 71.6 74.4 80.3 81.6

cubic feet 44.7 50.6 49.1 53.5 56.4 72.8 72.5

overall size width x length in. mm 27˝ x 90˝ 27˝ x 102˝ 27˝ x 96˝ 27˝ x 108˝ 27˝ x 114˝ 31˝ x 126˝ 35˝ x 114˝

686 x 2286 686 x 2591 686 x 2438 686 x 2743 686 x 2896 787 x 3200 889 x 2896

model # FN2048-3-18-14/3 FN2048-3-24-14/3 FN2054-3-18-14/3 *• FN2054-3-24-14/3 * FN2060-3-24-14/3 * FN2472-3-24-14/3 * FN2860-3-24-14/3 *

list 4693 4788 5527 5688 5688 * Features two sets of faucet holes. 6786 6966

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


SINKS Catalog Section 20

SPEC-MASTER® FN Series Coved Corner Sinks

Four-Compartment Sinks see spec sheet

EG20.35

The Consultant’s Choice

all sinks have two sets of faucet holes

FEATURES:

• 14 gauge type 304 18-8 stainless steel. • All bowls are 14˝ (356mm) deep and have 5 ⁄8˝ (16mm) radius corners, both vertical and horizontal. • Stainless steel gussets, feet, legs and crossbracing. • Adjustable crossbracing front-to-back and side-to-side for increased stability. • 91⁄2˝ (241mm) standard backsplash includes 1˝ (25mm) upturn and tile edge. • Basket-type waste drains are included to fit sink bowls’ 31⁄2˝ (89mm) opening and feature 11⁄2˝ (38mm) outlet. • 30˝ and 36˝ (762 and 914mm) drainboards available upon request. Note:

Notes: Twist drain brackets available. Works in conjunction with optional twist handle drains (not included – see page 183). To order, add $27 per compartment to list price and suffix “-TB” to model number (example: FN2064-4-14/3-TB).

All shipping weights and cubic feet are approximate. ALL SINKS SHIPPED FULLY CRATED. For sink accessories, see pages 181-185. For sink kits, see page 163.

For overflow hole (does not include drain), add $40 per compartment to list price and suffix “-OF” to model number (example: FN2064-4-14/3-OF).

Freight class is 150.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Four Compartments, No Drainboards bowl size width x length in. mm 20˝ x 16˝ 20˝ x 18˝ 20˝ x 20˝ 24˝ x 24˝ 28˝ x 20˝

508 x 406 508 x 457 508 x 508 610 x 610 711 x 508

drainboard length weight in. mm lbs. kg n/a n/a n/a n/a n/a

n/a n/a n/a n/a n/a

121 132 142 163 170

54.9 59.9 64.4 73.9 77.1

cubic feet 35.4 39.0 42.7 57.1 54.9

overall size width x length in. mm 27˝ x 75˝ 27˝ x 83˝ 27˝ x 91˝ 31˝ x 107˝ 35˝ x 91˝

686 x 1905 686 x 2108 686 x 2311 787 x 2718 889 x 2311

model # FN2064-4-14/3 FN2072-4-14/3 FN2080-4-14/3 FN2496-4-14/3 FN2880-4-14/3

list 5623 6317 6317 7268 7687

Four Compartments, One Drainboard (right or left) bowl size width x length in. mm 20˝ x 16˝

508 x 406

20˝ x 18˝

508 x 457

20˝ x 20˝ 24˝ x 24˝ 28˝ x 20˝

508 x 508 610 x 610 711 x 508

drainboard length weight in. mm lbs. kg 18˝ 24˝ 18˝ 24˝ 24˝ 24˝ 24˝

457 610 457 610 610 610 610

140 146 151 157 167 188 195

63.5 66.2 68.5 71.2 75.8 85.3 88.5

cubic feet 45.7 48.6 50.1 52.5 56.4 68.5 67.7

overall size width x length in. mm 27˝ x 911⁄2˝ 27˝ x 971⁄2˝ 27˝ x 991⁄2˝ 27˝ x 1051⁄2˝ 27˝ x 1131⁄2˝ 31˝ x 1291⁄2˝ 35˝ x 1131⁄2˝

686 x 2324 686 x 2477 686 x 2527 686 x 2680 686 x 2883 787 x 3289 889 x 2883

model # FN2064-4-18R or L-14/3 FN2064-4-24R or L-14/3 FN2072-4-18R or L-14/3 FN2072-4-24R or L-14/3 FN2080-4-24R or L-14/3 FN2496-4-24R or L-14/3 FN2880-4-24R or L-14/3

list 5664 5715 6685 6723 6723 7954 8178

Four Compartments, Double Drainboards bowl size width x length in. mm 20˝ x 16˝

508 x 406

20˝ x 18˝

508 x 457

20˝ x 20˝ 24˝ x 24˝ 28˝ x 20˝

508 x 508 610 x 610 711 x 508

drainboard length weight in. mm lbs. kg 18˝ 24˝ 18˝ 24˝ 24˝ 24˝ 24˝

457 610 457 610 610 610 610

159 171 170 182 192 213 220

cubic feet

72.1 53.5 77.6 55.4 77.1 54.9 82.6 59.0 87.1 62.6 96.6 81.4 99.8 110.2

overall size width x length in. mm 27˝ x 108˝ 27˝ x 120˝ 27˝ x 116˝ 27˝ x 128˝ 27˝ x 136˝ 31˝ x 152˝ 35˝ x 136˝

686 x 2743 686 x 3048 686 x 2646 686 x 3251 686 x 3454 787 x 3861 889 x 3454

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

model # FN2064-4-18-14/3 FN2064-4-24-14/3 FN2072-4-18-14/3 • FN2072-4-24-14/3 FN2080-4-24-14/3 FN2496-4-24-14/3 FN2880-4-24-14/3

list 5872 5982 6853 6918 6918 8176 8413

171


SINKS Catalog Section 20

Utility Sinks One- and Two-Compartment Sinks see spec sheets EG20.13A EG20.13B

FEATURES: Note:

Overflow hole available (does not include drain). To order, add $40 per compartment to list price and suffix “-OF” to model number (example: 1818-1-16/3-OF).

• For numerous applications when NSF construction is not required. • Square-corner construction. • 8˝ (203mm) backsplash. • Adjustable bullet feet. • Heavy gauge stainless steel. • 304 and 430 series construction available. • Sink compartments are 131⁄4˝ (337mm) deep. • Legs are 15⁄8˝ (41mm) diameter galvanized tubing and are located directly under sink compartments for maximum stability and weight support. Freight class is 150.0. (•) MTS (made to stock) / ( ) MTO (made to order)

For detachable drainboards, see page 174. For NSF-approved utility sinks, add 35% to list price and add prefix “N-” to model number. Example: N-2460-2-16/3.

One Compartment, No Drainboards bowl size width x length in. mm 18˝ x 18˝ 18˝ x 24˝ 21˝ x 18˝ 21˝ x 24˝ 21˝ x 36˝ 24˝ x 24˝ 24˝ x 36˝

457 x 457 457 x 610 533 x 457 533 x 610 533 x 914 610 x 610 610 x 914

drainboard length weight in. mm lbs. kg

cubic feet

n/a n/a n/a n/a n/a n/a n/a

0.9 11.6 10.5 13.1 18.1 14.6 20.2

n/a n/a n/a n/a n/a n/a n/a

53 56 56 59 65 60 68

24.0 25.4 25.4 26.8 29.5 27.2 30.8

overall size width x length in. mm 22˝ x 193⁄8˝ 22˝ x 253⁄8˝ 25˝ x 193⁄8˝ 25˝ x 253⁄8˝ 25˝ x 373⁄8˝ 28˝ x 253⁄8˝ 28˝ x 373⁄8˝

559 x 492 559 x 645 635 x 492 635 x 645 635 x 949 711 x 645 711 x 949

type 430 stainless steel model # list 1818-1-16/4 • 871 1824-1-16/4 877 2118-1-16/4 • 867 2124-1-16/4 • 897 2136-1-16/4 966 2424-1-16/4 • 934 2436-1-16/4 • 994

type 304 stainless steel model # list 1818-1-16/3 1016 1824-1-16/3 1062 2118-1-16/3 1042 2124-1-16/3 1092 2136-1-16/3 1213 2424-1-16/3 1146 2436-1-16/3 1271

type 430 stainless steel model # list 2124-1-18-16/4 1931 2424-1-24-16/4 2078

type 304 stainless steel model # list 2124-1-18-16/3 2355 2424-1-24-16/3 2434

type 430 stainless steel model # list 1836-2-16/4 • 1175 1848-2-16/4 1231 2136-2-16/4 • 1202 2148-2-16/4 1215 2448-2-16/4 • 1333 2460-2-16/4 1652

type 304 stainless steel model # list 1836-2-16/3 1436 1848-2-16/3 1547 2136-2-16/3 1478 2148-2-16/3 1561 2448-2-16/3 1659 2460-2-16/3 1904

type 430 stainless steel model # list 2136-2-18-16/4 2381 2448-2-24-16/4 2479

type 304 stainless steel model # list 2136-2-18-16/3 2899 2448-2-24-16/3 2977

One Compartment, Double Drainboards bowl size width x length in. mm 21˝ x 24˝ 24˝ x 24˝

533 x 610 610 x 610

drainboard length weight in. mm lbs. kg 18˝ 24˝

457 610

99 108

44.9 49.0

cubic feet 28.3 37.1

overall size width x length in. mm 25˝ x 601⁄4˝ 28˝ x 721⁄4˝

635 x 1530 711 x 1835

Two Compartments, No Drainboards bowl size width x length in. mm 18˝ x 18˝ 18˝ x 24˝ 21˝ x 18˝ 21˝ x 24˝ 24˝ x 24˝ 24˝ x 30˝

457 x 457 457 x 610 533 x 457 533 x 610 610 x 610 610 x 762

drainboard length weight in. mm lbs. kg

cubic feet

n/a n/a n/a n/a n/a n/a

16.1 20.6 18.1 23.2 25.8 31.5

n/a n/a n/a n/a n/a n/a

75 80 80 85 89 95

34.0 36.3 36.3 38.6 40.4 43.1

overall size width x length in. mm 22˝ x 373⁄8˝ 22˝ x 493⁄8˝ 25˝ x 373⁄8˝ 25˝ x 493⁄8˝ 28˝ x 493⁄8˝ 28˝ x 613⁄8˝

559 x 949 559 x 1254 635 x 949 635 x 1254 711 x 1254 711 x 1559

Two Compartments, Double Drainboards bowl size width x length in. mm 21˝ x 18˝ 24˝ x 24˝

172

533 x 457 610 x 610

drainboard length weight in. mm lbs. kg 18˝ 24˝

457 610

120 3048 139 3531

cubic feet 33.3 48.4

overall size width x length in. mm 25˝ x 721⁄4˝ 28˝ x 961⁄4˝

635 x 1835 711 x 2445

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


SINKS Catalog Section 20 Note:

Utility Sinks Three- and Four-Compartment Sinks

Overflow hole available (does not include drain). To order, add $40 per compartment to list price and suffix “-OF” to model number (example: 1836-3-16/3-OF). For detachable drainboards, see page 174.

see spec sheets EG20.13C EG20.13D

For NSF-approved utility sinks, add 35% to list price and add prefix “N-” to model number. Example: N-1836-3-16/3.

Freight class is 150.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Three Compartments, No Drainboards bowl size width x length in. mm 18˝ x 12˝ 18˝ x 16˝ 18˝ x 18˝ 21˝ x 12˝ 21˝ x 16˝ 21˝ x 18˝ 21˝ x 20˝ 24˝ x 16˝ 24˝ x 20˝ 24˝ x 24˝

457 x 305 457 x 406 457 x 457 533 x 305 533 x 406 533 x 457 533 x 508 610 x 406 610 x 508 610 x 610

drainboard length weight in. mm lbs. kg n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a

n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a

79 90 97 85 87 100 110 92 115 125

35.8 40.8 44.0 38.6 39.5 45.4 49.9 41.7 52.2 56.7

cubic feet 16.1 20.6 22.8 18.1 23.2 25.7 28.3 25.8 31.5 37.1

overall size width x length in. mm 22˝ x 373⁄8˝ 22˝ x 493⁄8˝ 22˝ x 553⁄8˝ 25˝ x 373⁄8˝ 25˝ x 493⁄8˝ 25˝ x 553⁄8˝ 25˝ x 613⁄8˝ 28˝ x 493⁄8˝ 28˝ x 613⁄8˝ 28˝ x 733⁄8˝

559 x 949 559 x 1254 559 x 1407 635 x 949 635 x 1254 635 x 1407 635 x 1559 711 x 1254 711 x 1559 711 x 1864

type 430 stainless steel model # list 1836-3-16/4 • 1354 1848-3-16/4 1411 1854-3-16/4 • 1603 2136-3-16/4 • 1388 2148-3-16/4 • 1448 2154-3-16/4 • 1609 2160-3-16/4 * 1664 2448-3-16/4 1522 2460-3-16/4 * 1760 2472-3-16/4 *• 1802

type 304 stainless steel model # list 1836-3-16/3 1646 1848-3-16/3 1748 1854-3-16/3 1908 2136-3-16/3 1699 2148-3-16/3 1804 2154-3-16/3 1960 2160-3-16/3 * 2037 2448-3-16/3 1887 2460-3-16/3 * 2117 2472-3-16/3 * 2240

type 430 stainless steel model # list 2136-3-18-16/4 2512 2148-3-18-16/4 2433 2154-3-18-16/4 2745 2472-3-24-16/4* 2961

type 304 stainless steel model # list 2136-3-18-16/3 3291 2148-3-18-16/3 2877 2154-3-18-16/3 3098 2472-3-24-16/3 * 3771

* Features two sets of faucet holes.

Three Compartments, Double Drainboards bowl size width x length in. mm 21˝ x 12˝ 21˝ x 16˝ 21˝ x 18˝ 24˝ x 24˝

533 x 305 533 x 406 533 x 457 610 x 610

drainboard length weight in. mm lbs. kg 18˝ 18˝ 18˝ 24˝

457 457 457 610

125 127 140 175

56.7 57.6 63.5 79.4

cubic feet 33.3 38.4 40.9 59.6

overall size width x length in. mm 25˝ x 721⁄4˝ 25˝ x 841⁄4˝ 25˝ x 901⁄4˝ 28˝ x 1201⁄4˝

635 x 1835 635 x 2140 635 x 2292 711 x 3054

* Features two sets of faucet holes.

Four Compartments, No Drainboards (All sinks feature two sets of faucet holes.) bowl size width x length in. mm 18˝ x 18˝ 21˝ x 18˝ 24˝ x 18˝

457 x 457 533 x 457 610 x 457

drainboard length weight in. mm lbs. kg n/a n/a n/a

n/a n/a n/a

110 115 125

49.9 52.2 56.7

cubic feet 29.5 33.3 37.1

overall size width x length in. mm 22˝ x 733⁄8˝ 25˝ x 733⁄8˝ 28˝ x 733⁄8˝

559 x 1864 635 x 1864 711 x 1864

type 430 stainless steel model # list 1872-4-16/4 1845 2172-4-16/4 1931 2472-4-16/4 1985

type 304 stainless steel model # list 1872-4-16/3 2299 2172-4-16/3 2335 2472-4-16/3 2443

Four Compartments, Double Drainboards - (All sinks feature two sets of faucet holes.) bowl size width x length in. mm 21˝ x 18˝

533 x 457

drainboard length weight in. mm lbs. kg 18˝

457

155

70.3

cubic feet 48.5

overall size width x length in. mm 25˝ x 1081⁄4˝

635 x 2750

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

type 430 stainless steel model # list 2172-4-18-16/4 3044

type 304 stainless steel model # list 2172-4-18-16/3 3552

173


SINKS Catalog Section 20

Detachable Drainboards for Utility Sinks see spec sheet EG20.13E

FEATURES:

• Unique die-stamped rolled rim construction. • All drainboards are fully reversible, allowing for left- or right-hand operation. • “Easy clip-on installation” utilizes two support brackets that bolt to sink gussets. • Available in 430 or 304 series stainless steel. • Drainboards 30˝ (762mm) long are furnished with legs. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

width (front-to-back) x length (side-to-side) weight in. mm lbs. kg detachable drainboard

Drainboards will not work on NSF utility sinks!

18˝ x 18˝ 18˝ x 24˝ 18˝ x 30˝ 21˝ x 18˝ 21˝ x 24˝ 21˝ x 30˝ 24˝ x 18˝ 24˝ x 24˝ 24˝ x 30˝

457 x 457 457 x 610 457 x 762 533 x 457 533 x 610 533 x 762 610 x 457 610 x 610 610 x 762

19 23 27 20 24 28 21 25 29

8.6 10.4 12.2 9.0 10.9 12.7 9.5 11.3 13.2

16 gauge type 430 cu stainless steel ft model # list 1.8 18x18 RRDEDB • 244 1.9 18x24 RRDEDB • 259 2.8 18x30 RRDEDB 441 1.8 21x18 RRDEDB • 244 2.1 21x24 RRDEDB • 263 2.5 21x30 RRDEDB 493 2.3 24x18 RRDEDB • 252 2.4 24x24 RRDEDB • 273 2.7 24x30 RRDEDB 483

16 gauge type 304 stainless steel model # list 18x18 RRDEDB-16/3 409 18x24 RRDEDB-16/3 431 18x30 RRDEDB-16/3 481 21x18 RRDEDB-16/3 409 21x24 RRDEDB-16/3 431 21x30 RRDEDB-16/3 518 24x18 RRDEDB-16/3 404 24x24 RRDEDB-16/3 444 24x30 RRDEDB-16/3 509

• Full front and 10˝ (254mm) high backsplash are 14 gauge stainless steel. EG20.54 • 14 gauge double drainboards, rolled rims and sink bowl partitions. • 1˝ (25mm) downturn at rear. • Sink compartments feature 3⁄4˝ (19mm) coved inside radii. • Basket-type waste drain fits 31⁄2˝ (89mm) opening and features 11⁄2˝ (38mm) outlet. • Legs are located directly under sink bowls. • All-welded base constructed of 15⁄8˝ (41mm) diameter tubular stainless steel. • Adjustable stainless steel bullet feet. FEATURES: • 14˝ (356mm) water level and swirl-away drainage.

SPEC-MASTER® FFN Series Flush Front Sinks see spec sheet

three-compartment sink

Freight class is 150.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Two Compartments bowl size width x length in. mm 27˝ x 18˝

686 x 457

27˝ x 20˝

686 x 508

27˝ x 24˝

686 x 610

27˝ x 30˝

686 x 762

drainboard length in. mm 24˝ 30˝ 24˝ 30˝ 24˝ 30˝ 24˝ 30˝

610 762 610 762 610 762 610 762

overall size width x length in. mm 301⁄2˝ x 855⁄8˝ 301⁄2˝ x 975⁄8˝ 301⁄2˝ x 895⁄8˝ 301⁄2˝ x 1015⁄8˝ 301⁄2˝ x 975⁄8˝ 301⁄2˝ x 1095⁄8˝ 301⁄2˝ x 1095⁄8˝ 301⁄2˝ x 1215⁄8˝

775 x 2216 775 x 2480 775 x 2318 775 x 2581 775 x 2521 775 x 2785 775 x 2826 775 x 3089

model # FFN2736-2-24-14/3 FFN2736-2-30-14/3 FFN2740-2-24-14/3 FFN2740-2-30-14/3 FFN2748-2-24-14/3 FFN2748-2-30-14/3 FFN2760-2-24-14/3 FFN2760-2-30-14/3

Three Compartments *

list 12553 14049 13131 14621 14280 15777 16008 17499

in

mm

301⁄2˝ x 1051⁄4˝ 301⁄2˝ x 1171⁄4˝ 301⁄2˝ x 1111⁄4˝ 301⁄2˝ x 1231⁄4˝ 301⁄2˝ x 1231⁄4˝ 301⁄2˝ x 1351⁄4˝ 301⁄2˝ x 1411⁄4˝ 301⁄2˝ x 1531⁄4˝

775 x 2673 775 x 2978 775 x 2826 775 x 3131 775 x 3131 775 x 3435 775 x 3588 775 x 3893

model # FFN2754-3-24-14/3 FFN2754-3-30-14/3 FFN2760-3-24-14/3 FFN2760-3-30-14/3 FFN2772-3-24-14/3 FFN2772-3-30-14/3 FFN2790-3-24-14/3 FFN2790-3-30-14/3

* Three-Compartment sinks feature two sets of faucet holes.

174

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

list 15142 16869 16008 17736 17736 19459 20325 22053


SINKS Catalog Section 20 • All bowls have 14˝ depth (356mm), 5 ⁄8˝ (16mm) radius corners. • 14 gauge type 304 18-8 stainless steel construction. • Available with one, two, or no drainboards. FEATURES:

SPEC-MASTER® Supermarket Meat-Platter Sinks see spec sheet

EG20.38

Note:

All shipping weights and cubic feet are approximate.

Freight class is 150.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Two Compartments inside bowl dimensions width x length in. mm 14˝ x 32˝ 14˝ x 32˝ 14˝ x 32˝

356 x 813 356 x 813 356 x 813

overall dimensions width x length in. mm 37˝ x 37˝ 37˝ x 531⁄2˝ 37˝ x 70˝

902 x 940 902 x 1359 902 x 1778

drain boards none one 18˝ (457mm) R or L two 18˝ (457mm) R & L

weight lbs. kg

cu ft

155 175 200

70.3 79.3 90.7

23 26 46

weight lbs. kg

cu ft

164 192 210 160 175 200

36 47 58 32 45 56

model # SFN2832-2-14/3 SFN2832-2-18R or L-14/3 SFN2832-2-18-14/3

list 4524 5092 5574

model # SFN3052-3-14/3 SFN3052-3-18R or L-14/3 SFN3052-3-18-14/3 SFN3242-3-14/3 SFN3242-3-18R or L-14/3 SFN3242-3-18-14/3

list 5799 6276 6437 6043 6229 6452

Three Compartments inside bowl dimensions width x length in. mm two 14˝ x 32˝ (356 x 813mm) bowls, & one 20˝ x 30˝ (508 x 762mm) bowl three 32˝ x 14˝ (813 x 356mm) bowls

overall dimensions width x length in. mm 37˝ x 59˝ 37˝ x 751⁄2˝ 37˝ x 92˝ 39˝ x 51˝ 39˝ x 671⁄2˝ 39˝ x 84˝

902 x 1499 902 x 1918 902 x 2337 991 x 1265 991 x 1715 991 x 2134

drain boards none one 18˝ (457mm) R or L two 18˝ (457mm) R & L none one 18˝ (457mm) R or L two 18˝ (457mm) R & L

Stainless Steel Fabricated Sinks see spec sheets EG20.14 EG20.15 20˝ x 20˝ ) (508 x 508mm bowls

drainboard # of length # of bowls in. mm drbds

2

3

n/a

• 14˝-deep (356mm) bowls with 5⁄8˝ (16mm) radius corners. • 91⁄2˝ (241mm)-high backsplash with FEATURES: 1˝ (25mm) upturn and tile edge.

S14 Series • Stainless steel legs, crossbracing, gussets and bullet feet.

(except where noted*)

1

NEW

74.4 87.1 95.3 72.6 79.4 90.7

overall length in. mm

0

29˝

18˝ 18˝ 18˝

457 457 457

1 1 2

671⁄2˝ 1715 671⁄2˝ 1715 81˝ 2057

737

18˝ 18˝ 18˝ 24˝ 24˝ 24˝

457 457 457 610 610 610

1 1 2 1 1 2

891⁄2˝ 891⁄2˝ 103˝ 951⁄2˝ 951⁄2˝ 115˝

2273 2273 2616 2426 2426 2921

14 gauge type 304 stainless steel construction model # list S14-20-1-SL 1492 S14-20-2-18R-SL 2591 S14-20-2-18L-SL 2591 S14-20-2-18-SL 2727 S14-20-3-18R-SL 3418 S14-20-3-18L-SL 3418 S14-20-3-18-SL 3597 S14-20-3-24R-SL 3564 S14-20-3-24L-SL 3564 S14-20-3-24-SL 3753 S14-28-3-18-SL * 4557

S16 Series • Galvanized legs, crossbracing and gussets. • Plastic bullet feet. 16 gauge type 304 stainless steel construction model # list S16-20-1 1313 S16-20-2-18R 2280 S16-20-2-18L 2280 S16-20-2-18 2400 S16-20-3-18R 3007 S16-20-3-18L 3007 S16-20-3-18 3165 S16-20-3-24R 3137 S16-20-3-24L 3137 S16-20-3-24 3302 S16-28-3-18 * 4007

3 18˝ 457 2 103˝ 2616 * #S14-28-3-18-SL and #S16-28-3-18 sinks feature 20˝ x 28˝ (508 x 711mm) sink bowls.

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

Freight class is 100.0.

S14-20-3-18-SL

S16-20-3-18

175


SINKS Catalog Section 20

Convenience Store Sinks see spec sheet

EG20.19

2˝-wide euro-style edgi ng on 310 series

• Heavy gauge type 304 construction. • Sink bowls of 310 Series are deep-drawn; Sink bowls of 312 Series are fabricated. • 91⁄2˝ (241mm) backsplash includes 1˝ (25mm) upturn and tile edge for easy installation and feathering to wall/splash surface. FEATURES: Note:

Twist drain brackets available. Works in conjunction with optional twist handle drains (not included – see page 183). To order, add $27 per compartment to list price and suffix “-TB” to model number (example: 310-10-3-12-TB).

Faucet for Convenience Store Sinks description (faucet not included)

10˝ (254mm) spout

model # 300489

All shipping weights and cubic feet are approximate.

list 122

Freight class is 150.0. (•) MTS (made to stock) / ( ) MTO (made to order)

310 Series no. bowls

bowl size width x length x depth

drain boards

overall size width x length

shipping weight

cu ft

model #

3

14˝ x 10˝ x 91⁄2˝ (355 x 254 x 241mm) 14˝ x 10˝ x 91⁄2˝ (355 x 254 x 241mm) 14˝ x 10˝ x 91⁄2˝ (355 x 254 x 241mm)

two 12˝ (305mm) two 18˝ (457mm) two 24˝ (610mm)

21˝ x 60˝ (533 x 1524mm) 21˝ x 72˝ (533 x 1829mm) 21˝ x 84˝ (533 x 2134mm)

71 lbs. (32.2 kg) 78 lbs. (35.4 kg) 87 lbs. (39.5 kg)

23

310-10-3-12 •

2742

27

310-10-3-18 •

2812

32

310-10-3-24

2865

3 3

list

312 Series no. bowls

bowl size width x length x depth

drain boards

overall size width x length

shipping weight

cu ft

model #

3

20˝ x 12˝ x 12˝ (508 x 305 x 305mm) 16˝ x 14˝ x 12˝ (406 x 356 x 305mm)

two 12˝ (305mm) two 12˝ (305mm)

27˝ x 66˝ (686 x 1676mm) 23˝ x 72˝ (584 x 1829mm)

89 lbs. (40.4 kg) 105 lbs. (47.6 kg)

22

312-12-3-12 •

2909

46

312-14-3-12 •

3117

3

314 Series Corner Sinks see spec sheet

EG20.09

FEATURES:

list

• Deep-drawn, heavy gauge type 304 construction. • Poly cutting board/sink cover. Note:

All shipping weights and cubic feet are approximate. Twist drain brackets available. Works in conjunction with optional twist handle drains (not included - see page 183). To order, add $27 per compartment to list price and suffix “-TB” to model number. Example: C314-10-3-12-TB. ALL SINKS SHIPPED FULLY CRATED.

Freight class is 150.0.

all sinks have two sets of faucets holes

(•) MTS (made to stock) / ( ) MTO (made to order)

no. bowls

bowl size width x length x depth

drain boards

overall size width x length

shipping weight

cu ft

3

10˝ x 14˝ x 91⁄2˝ (254 x 355 x 241mm) 16˝ x 20˝ x 131⁄2˝ (406 x 508 x 342mm) 22˝ x 22˝ x 131⁄2˝ (558 x 558 x 342mm) 24˝ x 24˝ x 131⁄2˝ (610 x 610 x 342mm)

two 12˝ (305mm) two 18˝ (457mm) two 18˝ (457mm) two 24˝ (610mm)

39˝ x 43˝ (991 x 1092mm) 571⁄4˝ x 593⁄4˝ (1454 x 1518mm) 69˝ x 69˝ (1753 x 1753mm) 79˝ x 79˝ (2007 x 2007mm)

80 lbs. (36.3 kg) 140 lbs. (63.5 kg) 175 lbs. (79.4 kg) 200 lbs. (90.7 kg)

27

model # C314-10-3-12

list 4601

65

C314-16-3-18 •

6053

87

C314-22-3-18

6566

108 C314-24-3-24

7096

3 3 3

176

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


SINKS Catalog Section 20

Mop Sink see spec sheet

EG20.01 FEATURES:

• 304 18-8 stainless steel construction. • 8˝ (203mm) deep sink bowl is heavy gauge with deep-drawn coved corners. • Drain with flat strainer plate. Freight class is 85.0. (•) MTS (made to stock) / ( ) MTO (made to order)

bowl size width x length x depth in mm

overall size width x length in mm

16˝ x 20˝ x 8˝ 406 x 508 x 203 211⁄2˝ x 245⁄8˝

546 x 625

shipping weight lbs. kg

cu ft model # list 15.8 4.2 F1916 • 1354

35

Optional Accessories for Mop Sink weight lbs. kg model # 4 1.8 312688 4.5 2.0 321561 • 8 3.6 312689 11 5.0 312690

description 3-pole mop holder 4-pole mop holder 30˝ (762mm) hose & wall mounted bracket service faucet (comes with vacuum breaker)

list 174 253 166 485

3-pole mop holder

Utility Shelves with Mop Hangers see spec sheet

EG20.02 FEATURES:

4-pole mop holder

hose & bracket

service faucet

• 16 gauge type 304 stainless steel. • Mop hangers. Flat hooks. • Hangers and hooks are riveted to front of shelf.

width x length in. mm

Freight class is 70.0.

model # list 8˝ x 24˝ 203 x 610 US0824-16/3 • 542 8˝ x 36˝ 203 x 914 US0836-16/3 623 8˝ x 48˝ 203 x 1219 US0848-16/3 788

(•) MTS (made to stock) / ( ) MTO (made to order)

Mop Sink Storage Cabinet see product announcement

EG8104

FEATURES:

• Heavy gauge type 430 stainless steel construction. • 12˝ (305mm)-wide center shelf. • Double-pan 20 gauge stainless steel hinged doors. • Transverse rod handles featuring keyed locks. • Top is slanted at a 15˚ angle. • Sides are louvered along the top for ventilation. • Holds two mops. • Comes with mop sink, service faucet, 30˝ (762mm) hose and wall mounted bracket.

includes 16˝ x 20˝ x 8˝ stainless steel mop sink

Freight class is 125.0. (•) MTS (made to stock) / ( ) MTO (made to order) Note:

Optional upgrade to type 300 stainless steel cabinet available. To order, add 15% to list price and suffix “-SE” to model number (example: F1916-VSCS-SE).

(mop not included)

width x length x height in. mm 221⁄4˝ x 25˝ x 841⁄4˝

565 x 635 x 2140

cubic feet 39.0

model # F1916-VSCS

list 5034

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

177


SINKS Catalog Section 20

Countertop Drop-In Self Rim Design Sinks see spec sheet EG20.39

FEATURES:

Freight class is 85.0.

All weights and cubic feet are approximate. Faucet holes are punched on 4˝ (102mm) centers. To order sinks with faucet holes punched on 8˝ (203mm) centers, add $150 to list price and add suffix “-8CL”(example: SR18-24-13.5-3-8CL). Faucets sold separately for “-8CL” sinks. See page 181.

Deck mount Electronic Eye Faucets available. For One-Compartment sinks only. To order, add suffix “-FE” to model #. Example: SR10-14-5-1-FE. Consult factory for list price.

• 304 series stainless steel. • Mounting hardware, faucet and basket drain.

(•) MTS (made to stock) / ( ) MTO (made to order)

Not NSF approved for warewashing and/or food preparation operations. Not intended for NSF installation into stainless steel worksurface. Please consult factory if need arises.

deck mount electronic-eye faucet

#SR-10-14-9.5-2 two-compartment sink

See page 181 for all replacement and optional faucets available.

One Compartment – Furnished with a #302004 faucet with gooseneck spout, except where noted. See page 184 for other available faucets. inside bowl dimensions width x length x depth in. mm

overall dimensions width x length in. mm

cutout dimensions width x length in. mm

drain hole weight cubic gauge in. mm lbs. kg feet model # list 20 31⁄2˝ 89 10 4.5 0.7 SR10-14-5-1 • 395 18 31⁄2˝ 89 12 5.4 1.4 SR10-14-9.5-1 • 489 20 31⁄2˝ 89 14 6.4 1.7 SR12-14-9.5-1 • 639 20 31⁄2˝ 89 10 4.5 0.8 SR14-10-5-1 395 20 31⁄2˝ 89 12 5.4 0.8 SRU14-10-5-1 * 840 18 31⁄2˝ 89 12 5.4 1.6 SR14-10-9.5-1 637 20 31⁄2˝ 89 14 6.4 1.8 SR14-12-9.5-1 621 20 31⁄2˝ 89 23 10.4 2.1 SR14-16-9.5-1 • 764 20 31⁄2˝ 89 23 10.4 2.1 SR16-14-9.5-1 764 18 31⁄2˝ 89 26 11.8 2.2 SR16-19-8-1 654 18 31⁄2˝ 89 28 12.7 3.9 SR16-19-13.5-1 820 18 31⁄2˝ 89 32 14.5 4.9 SR18-24-13.5-1 764 18 31⁄2˝ 89 24 10.9 2.3 SR19-16-8-1 ** • 764 18 31⁄2˝ 89 25 11.3 3.9 SR19-16-13.5-1 **• 820 20 31⁄2˝ 89 28 12.7 1.6 SR20-12-6.5-1 826 18 31⁄2˝ 89 34 15.4 5.5 SR22-22-13.5-1** 1024 18 31⁄2˝ 89 32 14.5 5.0 SR24-18-13.5-1 764 18 31⁄2˝ 89 36 16.3 6.4 SR24-24-13.5-1 1045

14˝ x 10˝ x 5˝ 356 x 254 x 127 19˝ x 123⁄4˝ 483 x 324 175⁄8˝ x 111⁄4˝ 448 x 286 14˝ x 10˝ x 91⁄2˝ 356 x 254 x 241 187⁄8˝ x 123⁄4˝ 480 x 324 171⁄2˝ x 111⁄4˝ 445 x 286 14˝ x 12˝ x 91⁄2˝ 356 x 305 x 241 19˝ x 143⁄4˝ 483 x 375 175⁄8˝ x 131⁄4˝ 448 x 337 10˝ x 14˝ x 5˝ 254 x 356 x 127 15˝ x 163⁄4˝ 381 x 426 135⁄8˝ x 151⁄4˝ 346 x 387 10˝ x 14˝ x 5˝ 254 x 356 x 127 15˝ x 163⁄4˝ 381 x 426 135⁄8˝ x 151⁄4˝ 346 x 387 10˝ x 14˝ x 91⁄2˝ 254 x 356 x 241 15˝ x 165⁄8˝ 381 x 422 135⁄8˝ x 151⁄8˝ 346 x 384 12˝ x 14˝ x 91⁄2˝ 305 x 356 x 241 17˝ x 163⁄4˝ 432 x 426 155⁄8˝ x 151⁄4˝ 397 x 387 16˝ x 14˝ x 91⁄2˝ 406 x 356 x 241 21˝ x 163⁄4˝ 533 x 425 195⁄8˝ x 151⁄4˝ 499 x 387 14˝ x 16˝ x 91⁄2˝ 356 x 406 x 241 19˝ x 183⁄4˝ 483 x 476 175⁄8˝ x 171⁄4˝ 448 x 448 20˝ x 16˝ x 8˝ 508 x 406 x 203 243⁄4˝ x 181⁄2˝ 629 x 470 233⁄8˝ x 17˝ 594 x 432 20˝ x 16˝ x 131⁄2˝ 508 x 406 x 343 243⁄4˝ x 181⁄2˝ 629 x 470 233⁄8˝ x 17˝ 594 x 432 24˝ x 18˝ x 131⁄2˝ 610 x 457 x 343 283⁄4˝ x 201⁄2˝ 730 x 521 273⁄8˝ x 19˝ 695 x 483 16˝ x 20˝ x 8˝ 406 x 508 x 203 203⁄4˝ x 221⁄2˝ 527 x 572 193⁄8˝ x 21˝ 492 x 533 16˝ x 20˝ x 131⁄2˝ 406 x 508 x 343 203⁄4˝ x 221⁄2˝ 527 x 572 193⁄8˝ x 21˝ 492 x 533 12˝ x 20˝ x 61⁄2˝ 305 x 508 x 165 17˝ x 223⁄4˝ 432 x 578 155⁄8˝ x 211⁄4˝ 397 x 540 22˝ x 22˝ x 131⁄2˝ 559 x 559 x 343 27˝ x 243⁄4˝ 686 x 629 255⁄8˝ x 231⁄4˝ 651 x 591 18˝ x 24˝ x 131⁄2˝ 457 x 610 x 343 223⁄4˝ x 261⁄2˝ 578 x 673 213⁄8˝ x 25˝ 543 x 635 24˝ x 24˝ x 131⁄2˝ 610 x 610 x 343 283⁄4˝ x 261⁄2˝ 730 x 673 273⁄8˝ x 25˝ 695 x 635 * #SRU14-10-5-1 features an upturn on sides and rear. ** These sinks utilize a #300490 faucet with 12˝ (305mm) swivel spout.

Two Compartment – Furnished with a #300490 faucet with 12˝ (203mm) spout, except where noted. See page 184 for other available faucets. inside bowl dimensions width x length x depth in. mm 14˝ x 10˝ x 91⁄2˝ 14˝ x 12˝ x 91⁄2˝ 16˝ x 14˝ x 91⁄2˝ 20˝ x 16˝ x 8˝ 20˝ x 16˝ x 131⁄2˝ 24˝ x 18˝ x 131⁄2˝ 22˝ x 22˝ x 131⁄2˝ 24˝ x 24˝ x 131⁄2˝

356 x 254 x 241 356 x 305 x 241 406 x 356 x 241 508 x 406 x 203 508 x 406 x 343 610 x 457 x 343 559 x 559 x 343 610 x 610 x 343

overall dimensions width x length in. mm

cutout dimensions width x length in. mm

187⁄8˝ x 243⁄4˝ 480 x 629 19˝ x 283⁄4˝ 483 x 730 21˝ x 323⁄4˝ 525 x 832 243⁄4˝ x 361⁄4˝ 527 x 921 243⁄4˝ x 361⁄4˝ 527 x 921 283⁄4˝ x 401⁄4˝ 578 x 1022 27˝ x 483⁄4˝ 686 x 1238 283⁄4˝ x 521⁄8˝ 730 x 1324

171⁄2˝ x 231⁄4˝ 445 x 591 175⁄8˝ x 271⁄4˝ 448 x 692 195⁄8˝ x 311⁄4˝ 499 x 794 233⁄8˝ x 343⁄4˝ 594 x 883 233⁄8˝ x 343⁄4˝ 594 x 883 273⁄8˝ x 383⁄4˝ 695 x 984 255⁄8˝ x 471⁄4˝ 651 x 1200 273⁄8˝ x 505⁄8˝ 695 x 1286

drain hole weight cubic gauge in. mm lbs. kg feet model # 18 31⁄2˝ 89 25 11.3 2.8 SR10-14-9.5-2 *• 20 31⁄2˝ 89 27 12.2 3.2 SR12-14-9.5-2 20 31⁄2˝ 89 42 19.1 4.0 SR14-16-9.5-2 18 31⁄2˝ 89 48 21.8 4.3 SR16-19-8-2 18 31⁄2˝ 89 52 23.6 7.5 SR16-19-13.5-2 • 18 31⁄2˝ 89 56 24.9 9.7 SR18-24-13.5-2 18 31⁄2˝ 89 57 25.9 10.7 SR22-22-13.5-2 18 31⁄2˝ 89 64 29.0 12.5 SR24-24-13.5-2

list 949 1011 1155 1359 1428 1636 1819 2209

* Model #SR10-14-9.5-2 utilizes a #301248 faucet with 8˝ (203mm) swivel spout.

Three Compartment – Furnished with a #300490 faucet with 12˝ (305mm) spout, except where noted. See page 184 for other available faucets. inside bowl dimensions width x length x depth in. mm 14˝ x 10˝ x 91⁄2˝ 14˝ x 12˝ x 91⁄2˝ 16˝ x 14˝ x 91⁄2˝ 20˝ x 16˝ x 8˝ 20˝ x 16˝ x 131⁄2˝ 24˝ x 18˝ x 131⁄2˝

356 x 254 x 241 356 x 305 x 241 406 x 356 x 241 508 x 406 x 203 508 x 406 x 343 610 x 457 x 343

overall dimensions width x length in. mm 187⁄8˝ x 363⁄4˝ 19˝ x 423⁄4˝ 21˝ x 483⁄4˝ 243⁄4˝ x 54˝ 243⁄4˝ x 54˝ 283⁄4˝ x 60˝

480 x 933 483 x 1086 533 x 1238 629 x 1372 629 x 1372 730 x 1524

cutout dimensions width x length in. mm 171⁄2˝ x 351⁄4˝ 175⁄8˝ x 411⁄4˝ 195⁄8˝ x 471⁄4˝ 233⁄4˝ x 521⁄2˝ 233⁄4˝ x 521⁄2˝ 273⁄4˝ x 581⁄2˝

445 x 895 448 x 1031 498 x 1200 594 x 1334 594 x 1334 695 x 1486

drain hole weight cubic gauge in. mm lbs. kg feet model # 18 31⁄2˝ 89 37 16.8 4.1 SR10-14-9.5-3 • 20 31⁄2˝ 89 39 17.6 4.7 SR12-14-9.5-3 20 31⁄2˝ 89 66 29.9 6.0 SR14-16-9.5-3 • 18 31⁄2˝ 89 72 32.7 6.3 SR16-19-8-3 18 31⁄2˝ 89 77 34.9 10.9 SR16-19-13.5-3 • 18 31⁄2˝ 89 82 37.2 14.1 SR18-24-13.5-3 *

* These sinks utilize a #301440 faucet with 14˝ (356mm) swivel spout.

178

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

list 1368 1605 1625 1768 1872 2272


SINKS Catalog Section 20

OEM Sink Bowls with Drawn Bowl see spec sheet

EG20.18 FEATURES:

• • • •

For NSF-approved welded fabrication. Deep-drawn seamless bowls. Type 304 stainless steel construction. Bowls are provided with drain holes only.

Note:

All shipping weights and cubic feet are approximate.

Freight class is 85.0. onecompartment OEM sink bowl

two-compartment OEM sink bowl

(•) MTS (made to stock) / ( ) MTO (made to order)

three-compartment OEM sink bowl

One Compartment inside bowl dimensions width x length x depth in. mm 14˝ x 10˝ x 5˝ 14˝ x 10˝ x 91⁄2˝ 14˝ x 12˝ x 91⁄2˝ 20˝ x 12˝ x 61⁄2˝ 16˝ x 14˝ x 6˝ 16˝ x 14˝ x 91⁄2˝ 193⁄4˝ x 153⁄8˝ x 8˝ 20˝ x 16˝ x 8˝ 20˝ x 16˝ x 131⁄2˝ 24˝ x 18˝ x 131⁄2˝ 20˝ x 20˝ x 5˝ 22˝ x 22˝ x 131⁄2˝ 24˝ x 24˝ x 131⁄2˝

356 x 254 x 127 356 x 254 x 241 356 x 305 x 241 508 x 305 x 165 406 x 356 x 152 406 x 356 x 241 502 x 391 x 203 508 x 406 x 203 508 x 406 x 343 610 x 457 x 343 508 x 508 x 127 559 x 559 x 343 610 x 610 x 343

overall dimensions width x length in. mm 16˝ x 12˝ 16˝ x 12˝ 16˝ x 14˝ 22˝ x 14˝ 18˝ x 16˝ 18˝ x 16˝ 213⁄4˝ x 173⁄8˝ 213⁄4˝ x 18˝ 213⁄4˝ x 18˝ 26˝ x 20˝ 22˝ x 22˝ 24˝ x 24˝ 26˝ x 26˝

406 x 305 406 x 305 406 x 356 559 x 356 457 x 406 457 x 406 552 x 441 552 x 457 552 x 457 660 x 508 559 x 559 610 x 610 660 x 660

gauge 20 18 20 20 20 20 20 18 18 18 20 18 18

drain hole weight in. mm lbs. kg

cu ft

31⁄2˝ 31⁄2˝ 31⁄2˝ 2˝ 31⁄2˝ 31⁄2˝ 2˝ 31⁄2˝ 31⁄2˝ 31⁄2˝ 31⁄2˝ 31⁄2˝ 31⁄2˝

4.1 5.0 5.8 6.4 6.4 6.4 6.8 10.4 11.3 16.8 8.6 17.6 18.6

1.4 1.4 2.4 2.6 2.5 2.3 2.6 3.7 3.7 8.6 1.5 7.3 8.3

model # FDI-10-14-5-1 FDI-10-14-9.5-1 FDI-12-14-9.5-1 FDI-12-20-6.5-1 FDI-14-16-6-1 FDI-14-16-9.5-1 FDI-15.38-19.75-8-1 FDI-16-19-8-1 FDI-16-19-13.5-1 FDI-18-24-13.5-1 FDI-20-20-5-1 FDI-22-22-13.5-1 FDI-24-24-13.5-1

drain hole weight in. mm lbs. kg

cu ft

model #

89 89 89 51 89 89 51 89 89 89 89 89 89

9 11 13 14 14 14 15 23 25 37 19 39 41

list 294 326 340 294 364 374 377 458 463 561 313 654 682

Two Compartment inside bowl dimensions width x length x depth in. mm 14˝ x 10˝ x 91⁄2˝ 14˝ x 12˝ x 91⁄2˝ 16˝ x 14˝ x 91⁄2˝ 20˝ x 16˝ x 8˝ 20˝ x 16˝ x 131⁄2˝ 24˝ x 18˝ x 131⁄2˝ 22˝ x 22˝ x 131⁄2˝ 24˝ x 24˝ x 131⁄2˝

356 x 254 x 241 356 x 305 x 241 406 x 356 x 241 508 x 406 x 203 508 x 406 x 343 610 x 457 x 343 559 x 559 x 343 610 x 610 x 343

overall dimensions width x length in. mm 16˝ x 24˝ 16˝ x 28˝ 18˝ x 32˝ 213⁄4˝ x 36˝ 213⁄4˝ x 36˝ 26˝ x 40˝ 24˝ x 48˝ 26˝ x 52˝

406 x 610 406 x 711 457 x 813 552 x 914 552 x 914 660 x 1016 610 x 1219 660 x 1321

gauge 18 20 20 18 18 18 18 18

31⁄2˝ 31⁄2˝ 31⁄2˝ 31⁄2˝ 31⁄2˝ 31⁄2˝ 31⁄2˝ 31⁄2˝

89 89 89 89 89 89 89 89

19 21 25 43 50 73 75 81

8.6 6.5 FDI-10-14-9.5-2 9.5 4.5 FDI-12-14-9.5-2 11.3 6.2 FDI-14-16-9.5-2 19.5 5.1 FDI-16-19-8-2 22.7 7.6 FDI-16-19-13.5-2 33.1 15.7 FDI-18-24-13.5-2 34.0 12.6 FDI-22-22-13.5-2 36.7 15.0 FDI-24-24-13.5-2

list 627 676 728 886 911 1064 1262 1315

Three Compartment inside bowl dimensions width x length x depth in. mm 14˝ x 10˝ x 91⁄2˝ 14˝ x 12˝ x 91⁄2˝ 16˝ x 14˝ x 91⁄2˝ 20˝ x 16˝ x 8˝ 20˝ x 16˝ x 131⁄2˝ 24˝ x 18˝ x 131⁄2˝ 22˝ x 22˝ x 131⁄2˝ 24˝ x 24˝ x 131⁄2˝

356 x 254 x 241 356 x 305 x 241 406 x 356 x 241 508 x 406 x 203 508 x 406 x 343 610 x 457 x 343 559 x 559 x 343 610 x 610 x 343

overall dimensions width x length in. mm 16˝ x 36˝ 16˝ x 42˝ 18˝ x 48˝ 213⁄4˝ x 54˝ 213⁄4˝ x 54˝ 26˝ x 60˝ 24˝ x 72˝ 26˝ x 78˝

406 x 914 406 x 1067 457 x 1219 552 x 1372 552 x 1372 660 x 1524 610 x 1829 660 x 1981

gauge 18 20 20 18 18 18 18 18

drain hole weight cu in. mm lbs. kg ft 31⁄2˝ 31⁄2˝ 31⁄2˝ 31⁄2˝ 31⁄2˝ 31⁄2˝ 31⁄2˝ 31⁄2˝

89 89 89 89 89 89 89 89

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

27 30 36 63 75 101 113 123

12.2 13.6 16.3 28.6 34.0 45.8 51.3 55.8

4.0 5.3 7.2 11.3 15.9 21.8 19.8 21.8

model # FDI-10-14-9.5-3 FDI-12-14-9.5-3 FDI-14-16-9.5-3 FDI-16-19-8-3 FDI-16-19-13.5-3 FDI-18-24-13.5-3 FDI-22-22-13.5-3 FDI-24-24-13.5-3

list 936 946 1061 1278 1334 1545 1753 1827

179


SINKS Catalog Section 20

OEM Sink Bowls with Drawn Bowl (Cont.) see spec sheet

EG20.18 FEATURES:

• • • •

For NSF-approved welded fabrication. Deep-drawn seamless bowls. Type 304 stainless steel construction. Bowls are provided with drain holes only.

Note:

All shipping weights and cubic feet are approximate.

Freight class is 85.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Four Compartment inside bowl dimensions width x length x depth in. mm 14˝ x 10˝ x 91⁄2˝ 14˝ x 12˝ x 91⁄2˝ 16˝ x 14˝ x 91⁄2˝ 20˝ x 16˝ x 8˝ 20˝ x 16˝ x 131⁄2˝ 24˝ x 18˝ x 131⁄2˝ 22˝ x 22˝ x 131⁄2˝ 24˝ x 24˝ x 131⁄2˝

overall dimensions width x length in. mm

356 x 254 x 241 356 x 305 x 241 406 x 356 x 241 508 x 406 x 203 508 x 406 x 343 610 x 457 x 343 559 x 559 x 343 610 x 610 x 343

16˝ x 48˝ 16˝ x 56˝ 18˝ x 64˝ 213⁄4˝ x 72˝ 213⁄4˝ x 72˝ 26˝ x 80˝ 24˝ x 96˝ 26˝ x 104˝

gauge

406 x 1219 406 x 1422 457 x 1626 552 x 1829 552 x 1829 660 x 3032 610 x 2438 660 x 2642

18 20 20 18 18 18 18 18

drain hole weight cu in. mm lbs. kg ft 31⁄2˝ 31⁄2˝ 31⁄2˝ 31⁄2˝ 31⁄2˝ 31⁄2˝ 31⁄2˝ 31⁄2˝

89 89 89 89 89 89 89 89

35 39 47 83 100 129 151 163

15.9 17.6 21.3 37.6 45.4 58.5 68.6 73.9

OEM Sink Bowls with Fabricated Wall see spec sheet

H DT I W

EG20.16

LE NG TH

FEATURES:

6.0 7.2 9.7 16.9 14.8 28.4 23.5 28.5

list 1126 1258 1306 1545 1595 1818 2126 2213

• For NSF-approved welded fabrication. • Type 304 18-8 stainless steel construction. • Bowls are tapered to allow for 60% nesting which facilitates shipping and storage. • 5⁄8˝ (16mm) radius corners. • 31⁄2˝ (89mm) drain hole with sump. • Swirl away drainage. Freight class is 85.0. (•) MTS (made to stock) / ( ) MTO (made to order)

DEPTH inside bowl dimensions (W x L x D) in. mm 9˝ x 12˝ x 6˝ 9˝ x 14˝ x 8˝ 12˝ x 14˝ x 8˝ 14˝ x 16˝ x 8˝ 18˝ x 18˝ x 10˝ 18˝ x 18˝ x 12˝ 20˝ x 20˝ x 10˝ 20˝ x 20˝ x 12˝ 20˝ x 20˝ x 14˝ 20˝ x 27˝ x 6˝ 201⁄2˝ x 201⁄2˝ x 5˝ 201⁄2˝ x 201⁄2˝ x 8˝ 24˝ x 24˝ x 12˝ 24˝ x 24˝ x 14˝

180

model # FDI-10-14-9.5-4 FDI-12-14-9.5-4 FDI-14-16-9.5-4 FDI-16-19-8-4 FDI-16-19-13.5-4 FDI-18-24-13.5-4 FDI-22-22-13.5-4 FDI-24-24-13.5-4

229 x 305 x 432 229 x 356 x 203 305 x 356 x 203 356 x 406 x 203 457 x 457 x 254 457 x 457 x 305 508 x 508 x 254 508 x 508 x 305 508 x 508 x 356 508 x 686 x 432 521 x 521 x 127 521 x 521 x 203 610 x 610 x 305 610 x 610 x 356

gauge 16 16 16 16 14 14 14 14 14 14 14 14 14 14

weight lbs. kg 6 8 11 12 24 27 25 29 32 20 18 24 38 42

2.7 3.6 5.0 5.4 10.9 12.2 11.3 13.2 14.5 9.0 8.2 10.9 17.2 19.1

cu ft model # 0.4 FNWNF-9-12-6-1 0.5 FNWNF-9-14-8-1 0.8 FNWNF-12-14-8-1 1.0 FNWNF-14-16-8-1 1.9 FNWNF-18-18-10-1 2.3 FNWNF-18-18-12-1 2.3 FNWNF-20-20-10-1 2.8 FNWNF-20-20-12-1 3.2 FNWNF-20-20-14-1 1.5 FNWNF-20-27-6-1 1.2 FNWNF-20.5-20.5-5-1 1.9 FNWNF-20.5-20.5-8-1 4.0 FNWNF-24-24-12-1 4.7 FNWNF-24-24-14-1

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

list 604 640 660 692 618 627 654 688 725 618 557 611 764 803


SINKS Catalog Section 20

Optional Faucets for Countertop Drop-In Sinks see spec sheet

Note:

Faucets listed are lead-free AB1953-compliant.

Can be shipped UPS.

EG20.39

(•) MTS (made to stock) / ( ) MTO (made to order)

See page 178 for Countertop Drop-In sinks.

Standard Deck Mount Faucets — with 1/4-turn handles description gooseneck faucet, 4˝ (102mm) center, for single bowls 8˝ (203mm) spout, 4˝ (102mm) centers, for single and double bowls 12˝ (305mm) spout, 4˝ (102mm) centers, for triple bowls 14˝ (356mm) spout, 4˝ (102mm) centers, for triple bowls

model # 302004 301248 300490 301440

list 168 151 160 175

model # 313308 313306 303560 * 313303 303561 * 313307 303562 *

list 403 388 448 402 506 403 504

#302004 faucet

OUR BEST

T&S Deck Mount Faucets description

gooseneck faucet, 4˝ (102mm) center, for single bowls 8˝ (203mm) spout, 4˝ (102mm) center, for single and double bowls 8˝ (203mm) spout, 8˝ (203mm) center, for single and double bowls, with spray arm 12˝ (305mm) spout, 4˝ (102mm) center, for triple bowls 12˝ (305mm) spout, 8˝ (203mm) center, for triple bowls, with spray arm 14˝ (356mm) spout, 4˝ (102mm) center, for triple bowls 14˝ (356mm) spout, 8˝ (203mm) center, for triple bowls, with spray arm

#303560 faucet

* Faucets with spray arm require special faucet holes.

#313303 T&S faucet

Custom Sink Modifications see spec sheet EG20.50 model # E30 E40 E41 E41A E43 E44 E45 E46 E101A

description End splash - per end, all heights Provision for sink heater Disposal provision package—collar Disposal provision package—cone Stand pipe with corner guard, available only on FN-style and utility sinks Faucet hole revision (adding or moving) Trough installed in drainboard - up to 30˝ (762mm) long Rubber scrap block installed Turn down backsplash (per sink), includes Z-clips

model # E37 E37A E38-6 * E38-12 * E39

description NSF sprayed-on latex sound deadening - up to 12´(3658mm) - for each additional foot Cantilever mount up to 6´(1829mm) - add to wall shelf price Cantilever mount up to 12´(3658mm) - add to wall shelf price Enclosed backsplash Sink cover holders, sized for stainless steel or poly (includes upper and lower track) Stainless steel apron, to cover sink bowls - 2 or 3 compartment - for each additional compartment over 3 s/s undershelf under drainboards - up to 24˝ (610mm) w/short legs - for each additional foot over 24˝ (610mm) Provision for water pump Optional size drainboard High backsplash up to 13˝ (330mm) High backsplash up to 18˝ (457mm) Working height revision Drainboard corner turn overflow hole

list 287 163 675 675 204 152 828 331 223

See pages 337-340 for more custom options and accessories.

Not Pictured

E47 E48 E48A E49 E49A E50 E51 E52 E53 E54 E55 E56

list 596 38 364 544 78/lin. ft. 622/slot 996 166 535 235 1396 308/lin. ft. 160/lin. ft. 1256/lin. ft. 272/sink 1256/ea. 40

* Applicable to wall mount shelves and pot racks. 100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

181


SINKS Catalog Section 20

Sink Accessories/Replacements

Can be shipped UPS.

see spec sheet EG20.51A

(•) MTS (made to stock) / ( ) MTO (made to order)

Sink Kits for SPEC-MASTER® FN Series Sinks • Includes T&S faucet #313293.

OUR BEST Service for over 60 years.

Quality... Value... Reliability!

T&S faucet #313293

lever drain with overflow (with sink kits C)

lever drain (with sink kits B)

Kit A

Kit B

Kit C

• Add suffix “-F” to sink model number.

• T&S faucet plus lever drain. Add suffix “-FD” to sink model number.

• T&S faucet plus lever drain with overflow. Add suffix “-FDO” to sink model number.

description 1 faucet 2 faucets

add to list price 554 1108

description 1 faucet 2 faucets per lever drain

add to list price 554 1108 213

Kit D

Kit E

• T&S faucet plus twist handle drain and twist handle bracket. Add suffix “-FDT” to sink model number.

• T&S faucet plus twist handle drain with overflow and twist handle bracket. Add suffix “-FDOT” to sink model number.

add to list price 554 1108 225

add to list price 554 1108 per twist handle drain with overflow 509

description 1 faucet 2 faucets per twist handle drain

add to description list price 1 faucet 554 2 faucets 1108 per lever drain with overflow 438

description 1 faucet 2 faucets

Plumbing Components description P-trap, nickel-plated tail piece for 1.5˝ (38.1mm) IPS connection, nickel-plated anti-siphon vacuum breaker backflow preventer

182

model # 300789 300791

list each 83 15 P-trap

313832 313834

162 189

tail piece

anti-siphon vacuum breaker

backflow preventer

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


SINKS Catalog Section 20

Sink Accessories/Replacements

Can be shipped UPS.

see spec sheet EG20.51A

(•) MTS (made to stock) / ( ) MTO (made to order)

Control Bracket

stainless steel sink cover polyboard sink cover

description 3˝ x 5˝ (76 x 127mm), extra heavy duty

model # 309796

list each 64

Note: Requires custom mounting.

Sink Covers… …Polyboard fits sink bowl size 14˝ x 10˝ (356 x 254mm) 16˝ x 20˝ (483 x 508mm) 20˝ x 18˝ (508 x 457mm) 20˝ x 20˝ (508 x 508mm) 22˝ x 22˝ (559 x 559mm) 24˝ x 18˝ (610 x 457mm) 24˝ x 24˝ (610 x 610mm) 28˝ x 20˝ (711 x 508mm)

model # 313207 351584 335377 326267 313204 326268 313205 326269

list 123 140 144 146 151 147 163 162

…Stainless Steel model # 321555 351585 346175 305428 321557 326270 321558 326271

stainless steel flanged bullet foot

list 153 174 183 176 194 188 238 191

Leg Components description 19˝ (483mm) stainless steel leg for utility sinks stainless steel bullet feet stainless steel flanged bullet feet plastic bullet feet

model # 300315 300692 313835 300293

list each 29 17 24 2

twist handle drain

lever handle drain with overflow

crumb cup strainer lever handle drain

Drains

max. flow rate gal. per gal. per description minute hour model # lever handle drain with 1.5˝ or 2˝ (38 or 51mm) NPS connection 27 1620 300720 lever handle drain with 2˝ (51mm) NPS connection 32 1920 300721 lever handle drain with 2˝ (51mm) NPS connection and overflow 32 1920 300722 twist handle drain with 1.5˝ or 2˝ (38 or 51mm) NPS connection 27 1620 341189* twist handle drain with 2˝ (51mm) NPS connection 32 1920 336002* twist handle drain with 2˝ (51mm) NPS connection and overflow 32 1920 341190* nickel-plated brass rotary drain with 1.5˝ or 2˝ (38 or 51mm) 40 2400 369653 NPS connection crumb cup strainer with 1.5˝ (38mm) outlet

18

1080

list 213 213 438 225 225 509 363

300287

19

* Twist handle bracket, for use with twist handle drain, should be ordered as sink option “-TB” at time of sink order —or see Sink Kits on page 163 (for 314, 412, or 414 Series sinks) or page 182 (for FN Series sinks).

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

183


SINKS Catalog Section 20 Note:

Sink Accessories/Replacements

Faucets listed are lead-free AB1953-compliant.

Can be shipped UPS.

see spec sheet EG20.51B

(•) MTS (made to stock) / ( ) MTO (made to order)

Standard Faucets • 8˝ (203mm) centers. • Splash mounted description

model # 313918 300716 300804 313919 301001 301002 301003 313075

8˝ (203mm) spout, standard 12˝ (305mm) spout, standard 14˝ (356mm) spout, standard 16˝ (406mm) spout, standard 12˝ (305mm) spout, heavy duty 14˝ (356mm) spout, heavy duty 19˝ (489mm) double-jointed spout gooseneck, 8˝ (203mm) center

list 202 208 212 213 499 504 560 148

19˝ (483mm) double-jointed spout faucet

12˝ (305mm) heavy duty faucet

Repair Kit for Standard Faucets • For faucets #313918, 300716, 300804 and 313919. description consists of hot/cold stems, handles, seats, bonnet nuts and O-rings

model # 304146

list 92

Standard Faucets with Wrist Handles • Deck mounted with 4˝ (102mm) centers. • 4˝ (102mm) long wrist handles and rigid gooseneck spout. description standard heavy duty

model # 301005 301004

list 285 465

standard wrist handle faucet

OUR BEST

OUR BEST T&S Extra Heavy Duty Faucets 12˝ (305mm) T&S faucet • Top-of-the-line. • Splash mounted with 8˝ (203mm) centers. • T&S quality products.

description 8˝ (203mm) spout 10˝ (254mm) spout 12˝ (305mm) spout 14˝ (356mm) spout

model # 313920 340380 313293 313294

list 540 551 554 559

T&S Extra Heavy Duty Faucet with Wrist Handles • Top-of-the-line. • Deck mounted with 4˝ (102mm) centers. • Same features as the above mentioned models, plus T&S quality. description extra heavy duty

model # 313304

T&S faucet with wrist handles

list 552

NEW

CUSTOM COSMETICS AVAILABLE!! PLACE

HERE! (corner sink with custom laser-cut for Valour Farms, Smyrna, DE)

184

Laser-Cutting and Custom Decal Services for Sinks with Drawn Bowls! Laser-Cutting Service… • Offers a “high-tech” look. • Creates smooth curves along text and/or artwork. • Materials includes various plastics, woods, and designer aluminum.

Decal Service… • Factory-applied decals are industrial-strength, yet more economical. • Image(s) printed on vinyl material with adhesive backing.

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


SINKS Catalog Section 20

Prerinse Units and Components

Can be shipped UPS. (•) MTS (made to stock) / ( ) MTO (made to order)

Standard description splash mounted spray unit deck mounted spray unit faucet add-on with 12˝ (305mm) spout wall bracket prerinse hose, 36˝ (914mm) length prerinse spray valve assembly for spray units #300718 and 300719

model # 300719 300718 301189 301190 313116 313323

list 1033 1029 274 69 196 169

prerinse spray valve assembly

T&S Extra Heavy Duty - Top-of-the-line. splash mounted prerinse spray unit

OUR BEST description splash mounted spray unit with wall bracket deck mounted spray unit with wall bracket faucet add-on with 12˝ (305mm) spout for use with #313296 faucet

model # 313296

list 1352

313295 313297

1273 337

deck mounted prerinse spray unit

prerinse wall bracket

prerinse faucet add-on

ECO-Built ™ is an important part of The Eagle Advantage. The numbers don’t lie. Eagle’s efforts to consume less, emit less and conserve more are beginning to bear fruit. The tree to the left shows just some of what we now accomplish each year.

Look for the ECO-Built ™ tag on the bar code.

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

185


SINKS Catalog Section 20

Floor Troughs see spec sheet

EG25.00

(see chart below for dimensions A through F)

FEATURES:

floor trough with subway-style grating

• Built-in pitch towards drain ensures complete drainage. • Secured with anchor straps. • Stainless steel drain accommodates up to a 4˝ (102mm) diameter pipe, and removable perforated stainless steel basket. • Stainless steel subway-style grating or fiberglass grating. Note:

Custom sizes available. Contact factory for pricing. Gray Fiberglass Grating available. To order add suffix “G” to model #. Example FT-1218-FGG.

Freight class is 85.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Yellow Fiberglass Grating Note:

Wide T-Bar Fiberglass Grating* available. ADA-approved! Wider T-bar width provides a more solid walking area, and prevents objects from falling through. Resistant to corrosion, skid, fire, chipping and cracking. To order, add 5% to list price and suffix “-ADA”. Example: FT-1224-FG-ADA.

* Please note: Wide T-Bar “ADA” option is available only for troughs with fiberglass grating, not for troughs with stainless steel grating.

dimension E dimension F in. mm in. mm 18˝ 24˝ 30˝ 36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 120˝

457 15˝ 610 21˝ 762 27˝ 914 33˝ 1219 45˝ 1524 57˝ 1829 69˝ 2134 81˝ 2438 93˝ 3048 117˝

381 533 686 838 1143 1448 1753 2057 2362 2972

12˝ (305mm) WIDE TROUGHS 15˝ (381mm) WIDE TROUGHS 18˝ (457mm) WIDE TROUGHS 24˝ (610mm) WIDE TROUGHS dimension A: 7˝ (178mm) dimension A: 10˝ (254mm) dimension A: 13˝ (330mm) dimension A: 19˝ (483mm) dimension B: 9˝ (229mm) dimension B: 12˝ (305mm) dimension B: 15˝ (381mm) dimension B: 21˝ (533mm) dimension C: 12˝ (305mm) dimension C: 15˝ (381mm) dimension C: 18˝ (457mm) dimension C: 24˝ (610mm) dimension D: 9.25˝ (235mm) dimension D: 12.25˝ (311mm) dimension D: 15.25˝ (387mm) dimension D: 21.25˝ (540mm)

model # FT-1218-FG FT-1224-FG FT-1230-FG FT-1236-FG FT-1248-FG FT-1260-FG FT-1272-FG FT-1284-FG FT-1296-FG FT-12120-FG

list 1759 1907 2092 2192 2516 2725 3078 3367 3675 4287

model # n/a FT-1524-FG FT-1530-FG FT-1536-FG FT-1548-FG FT-1560-FG FT-1572-FG FT-1584-FG FT-1596-FG FT-15120-FG

list n/a 1945 2113 2212 2547 2844 3139 3462 3736 4523

model # n/a FT-1824-FG FT-1830-FG FT-1836-FG FT-1848-FG FT-1860-FG FT-1872-FG FT-1884-FG FT-1896-FG FT-18120-FG

list n/a 2089 2306 2471 2861 3195 3571 3987 4353 5274

model # n/a FT-2424-FG FT-2430-FG FT-2436-FG • FT-2448-FG FT-2460-FG FT-2472-FG FT-2484-FG FT-2496-FG FT-24120-FG

list n/a 2236 2519 2716 3189 3656 3689 4596 5029 6117

Subway-Style Stainless Steel Grating 12˝ (305mm) WIDE TROUGHS 15˝ (381mm) WIDE TROUGHS 18˝ (457mm) WIDE TROUGHS 24˝ (610mm) WIDE TROUGHS dimension A: 7˝ (178mm) dimension A: 10˝ (254mm) dimension A: 13˝ (330mm) dimension A: 19˝ (483mm) dimension B: 9˝ (229mm) dimension B: 12˝ (305mm) dimension B: 15˝ (381mm) dimension B: 21˝ (533mm) dimension C: 12˝ (305mm) dimension C: 15˝ (381mm) dimension C: 18˝ (457mm) dimension C: 24˝ (610mm) dimension D: 9.25˝ (235mm) dimension D: 12.25˝ (311mm) dimension D: 15.25˝ (387mm) dimension D: 21.25˝ (540mm)

dimension E dimension F in. mm in. mm 18˝ 24˝ 30˝ 36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 120˝

186

457 15˝ 610 21˝ 762 27˝ 914 33˝ 1219 45˝ 1524 57˝ 1829 69˝ 2134 81˝ 2438 93˝ 3048 117˝

381 533 686 838 1143 1448 1753 2057 2362 2972

model # FT-1218-SG FT-1224-SG • FT-1230-SG FT-1236-SG • FT-1248-SG • FT-1260-SG FT-1272-SG FT-1284-SG FT-1296-SG FT-12120-SG

list 2444 2564 2643 2724 3366 4037 4639 5451 5609 7373

model # n/a FT-1524-SG FT-1530-SG FT-1536-SG FT-1548-SG FT-1560-SG FT-1572-SG FT-1584-SG FT-1596-SG FT-15120-SG

list n/a 2727 2792 3172 3861 4521 5199 5879 6516 7937

model # n/a FT-1824-SG • FT-1830-SG FT-1836-SG • FT-1848-SG FT-1860-SG FT-1872-SG FT-1884-SG FT-1896-SG FT-18120-SG

list n/a 2884 3044 3206 3811 4703 5148 6252 6412 8497

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

model # n/a FT-2424-SG FT-2430-SG FT-2436-SG • FT-2448-SG FT-2460-SG FT-2472-SG FT-2484-SG FT-2496-SG FT-24120-SG

list n/a 3491 3636 4145 4800 5382 6255 6837 7564 9163


SINKS Catalog Section 20

Anti-splash Floor Troughs see spec sheet

EG25.01

Patent # D519,618 S. FEATURES:

• Built-in pitch towards drain ensures complete drainage. • Secured with anchor straps. • Stainless steel drain accommodates up to a 4˝ (102mm) diameter pipe, and removable perforated stainless steel basket. • Stainless steel subway-style grating or fiberglass grating. Note:

Custom sizes available. Contact factory for pricing. Gray Fiberglass Grating available. To order add suffix “G” to model #. Example ASFT-1218-FGG.

“Anti-splash” design assures complete drainage while preventing splashing back onto the floor.

Freight class is 85.0. (see chart below for dimensions A through F)

Yellow Fiberglass Grating Note:

Wide T-Bar* Fiberglass Grating available. ADA-approved! Wider T-bar width provides a more solid walking area, and prevents objects from falling through. Resistant to corrosion, skid, fire, chipping and cracking. To order, add 5% to list price and suffix “-ADA”. Example: ASFT-1218-FG-ADA.

* Please note: Wide T-Bar “ADA” option is available only for troughs with fiberglass grating, not for troughs with stainless steel grating.

dimension E dimension F in. mm in. mm 18˝ 24˝ 30˝ 36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 120˝

(•) MTS (made to stock) / ( ) MTO (made to order)

457 15˝ 610 21˝ 762 27˝ 914 33˝ 1219 45˝ 1524 57˝ 1829 69˝ 2134 81˝ 2438 93˝ 3048 117˝

381 533 686 838 1143 1448 1753 2057 2362 2972

12˝ (305mm) WIDE TROUGHS 15˝ (381mm) WIDE TROUGHS 18˝ (457mm) WIDE TROUGHS 24˝ (610mm) WIDE TROUGHS dimension A: 7˝ (178mm) dimension A: 10˝ (254mm) dimension A: 13˝ (330mm) dimension A: 19˝ (483mm) dimension B: 9˝ (229mm) dimension B: 12˝ (305mm) dimension B: 15˝ (381mm) dimension B: 21˝ (533mm) dimension C: 12˝ (305mm) dimension C: 15˝ (381mm) dimension C: 18˝ (457mm) dimension C: 24˝ (610mm) dimension D: 11.25˝ (286mm) dimension D: 14.25˝ (362mm) dimension D: 17.25˝ (438mm) dimension D: 23.25˝ (591mm)

model # ASFT-1218-FG ASFT-1224-FG ASFT-1230-FG ASFT-1236-FG ASFT-1248-FG ASFT-1260-FG ASFT-1272-FG ASFT-1284-FG ASFT-1296-FG ASFT-12120-FG

list 1975 2143 2352 2463 2827 3060 3459 3785 4129 4819

model # n/a ASFT-1524-FG ASFT-1530-FG ASFT-1536-FG ASFT-1548-FG ASFT-1560-FG ASFT-1572-FG ASFT-1584-FG ASFT-1596-FG ASFT-15120-FG

list n/a 2185 2372 2484 2861 3198 3528 3889 4199 5082

model # n/a ASFT-1824-FG ASFT-1830-FG ASFT-1836-FG ASFT-1848-FG ASFT-1860-FG ASFT-1872-FG ASFT-1884-FG ASFT-1896-FG ASFT-18120-FG

list n/a 2346 2591 2775 3215 3589 4011 4481 4891 5924

model # n/a ASFT-2424-FG ASFT-2430-FG ASFT-2436-FG ASFT-2448-FG ASFT-2460-FG ASFT-2472-FG ASFT-2484-FG ASFT-2496-FG ASFT-24120-FG

list n/a 2512 2832 3053 3584 4106 4147 5165 5649 6529

Subway-Style Stainless Steel Grating 12˝ (305mm) WIDE TROUGHS 15˝ (381mm) WIDE TROUGHS 18˝ (457mm) WIDE TROUGHS 24˝ (610mm) WIDE TROUGHS dimension A: 7˝ (178mm) dimension A: 10˝ (254mm) dimension A: 13˝ (330mm) dimension A: 19˝ (483mm) dimension B: 9˝ (229mm) dimension B: 12˝ (305mm) dimension B: 15˝ (381mm) dimension B: 21˝ (533mm) dimension C: 12˝ (305mm) dimension C: 15˝ (381mm) dimension C: 18˝ (457mm) dimension C: 24˝ (610mm) dimension D: 11.25˝ (286mm) dimension D: 14.25˝ (362mm) dimension D: 17.25˝ (438mm) dimension D: 23.25˝ (591mm)

dimension E dimension F in. mm in. mm 18˝ 24˝ 30˝ 36˝ 48˝ 60˝ 72˝ 84˝ 96˝ 120˝

457 15˝ 610 21˝ 762 27˝ 914 33˝ 1219 45˝ 1524 57˝ 1829 69˝ 2134 81˝ 2438 93˝ 3048 117˝

381 533 686 838 1143 1448 1753 2057 2362 2972

model # ASFT-1218-SG ASFT-1224-SG ASFT-1230-SG ASFT-1236-SG ASFT-1248-SG ASFT-1260-SG ASFT-1272-SG ASFT-1284-SG ASFT-1296-SG ASFT-12120-SG

list 2737 2751 2876 3003 3738 4502 5197 6102 6355 8304

model # n/a ASFT-1524-SG ASFT-1530-SG ASFT-1536-SG ASFT-1548-SG ASFT-1560-SG ASFT-1572-SG ASFT-1584-SG ASFT-1596-SG ASFT-15120-SG

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

list n/a 2661 2956 3437 4135 4571 5589 6358 7011 8720

model # n/a ASFT-1824-SG ASFT-1830-SG ASFT-1836-SG ASFT-1848-SG ASFT-1860-SG ASFT-1872-SG ASFT-1884-SG ASFT-1896-SG ASFT-18120-SG

list n/a 3071 3277 3485 4182 5169 5708 6904 7157 9426

model # n/a ASFT-2424-SG ASFT-2430-SG ASFT-2436-SG ASFT-2448-SG ASFT-2460-SG ASFT-2472-SG ASFT-2484-SG ASFT-2496-SG ASFT-24120-SG

list n/a 3677 4260 4424 5173 5847 6814 7488 8308 10095

187


SINKS Catalog Section 20

Replacement Subway-Style Grating for Floor Troughs and Drains see spec sheet

Freight class is 85.0. (•) MTS (made to stock) / ( ) MTO (made to order)

EG25.02

Stainless Steel Grating

for floor trough

• Constructed of 3⁄16˝ x 1˝ (5 x 25mm) widths vertically positioned bars, spaced 1˝ in. mm (25mm) apart to allow ease of drainage. 12˝ 305 • 13⁄16˝ (21mm) clearance between bars 12˝ 305 12˝ 305 prevents casters on mobile equipment 15˝ 381 from wedging in grate. 15˝ 381 • Two 5⁄16˝ (8mm) rods, set 21⁄4˝ (57mm) in 18˝ 457 from each edge, are welded to the bars to eliminate swaying. 18˝ 457 • Standard on floor troughs. 18˝ 457 • Sizes available fit floor drains up to 24˝ wide. 18˝ 457 457 • Grates 12˝ and 15˝ (305 and 381mm) wide feature three rods. 18˝ 24˝ 610 • Grates 21˝ (533mm) wide feature five rods. 24˝ 24˝

610 610

grate width x length in. mm 9˝ x 71⁄2˝ 9˝ x 9˝ 9˝ x 12˝ 12˝ x 9˝ 12˝ x 12˝ 15˝ x 6˝ 15˝ x 71⁄2˝ 15˝ x 9˝ 15˝ x 12˝ 15˝ x 15˝ 21˝ x 9˝ 21˝ x 11˝ 21˝ x 12˝

229 x 191 229 x 229 229 x 305 305 x 229 305 x 305 381 x 154 381 x 191 381 x 229 381 x 305 381 x 381 533 x 229 533 x 279 533 x 305

Wide “T” Bar Fiberglass Grating — ADA-approved!

Fiberglass Grating

• Conforms with the Americans with Disabilities Act for use with the physically handicapped. • Provides a more solid walking area than traditional “T” bar shape, and prevents objects from falling through grating. • Corrosion-, skid- and fire-resistant. • High strength, low thermal conductivity. • Resistant to chipping and cracking. • Temperature rating of 250˚F.

• Constructed of 1˝ (25mm) high yellow or gray polyester material with a non-slip grit on top surface. • Tapered “I” beam construction for ease of cleaning and draining. • Temperature rating of 250˚F. • Other sizes available—consult factory.

for floor trough widths in. mm 12˝ 12˝ 12˝ 15˝ 15˝ 18˝ 18˝ 18˝ 24˝ 24˝

305 305 305 381 381 457 457 457 610 610

grate width x length in. mm 9˝ x 9˝ 9˝ x 12˝ 9˝ x 15˝ 12˝ x 9˝ 12˝ x 12˝ 15˝ x 9˝ 15˝ x 12˝ 15˝ x 15˝ 21˝ x 9˝ 21˝ x 12˝

229 x 229 229 x 305 229 x 381 305 x 229 305 x 305 381 x 229 381 x 305 381 x 381 533 x 229 533 x 305

GRAY

for floor trough widths in. mm

Gray model # 370000 370001 370002 370003 370004 370005 370006 370007 370008 370009

list ea 131 160 174 138 168 176 218 271 222 280

12˝ 12˝ 12˝ 15˝ 15˝ 18˝ 18˝ 18˝ 24˝ 24˝

Floor Drains see spec sheet

description shown without grating

188

with fiberglass grating with subway-style grating Note:

EG25.00

width x length in. mm 12˝ x 12˝ 12˝ x 12˝

305 305 305 381 381 457 457 457 610 610

9˝ x 9˝ 9˝ x 12˝ 9˝ x 15˝ 12˝ x 9˝ 12˝ x 12˝ 15˝ x 9˝ 15˝ x 12˝ 15˝ x 15˝ 21˝ x 9˝ 21˝ x 12˝

229 x 229 229 x 305 229 x 381 305 x 229 305 x 305 381 x 229 381 x 305 381 x 381 533 x 229 533 x 305

GRAY OR YELLOW

Yellow model # 362648 362647 373030 362650 362649 362652 362651 373206 362654 362653

list ea 106 127 135 106 127 137 166 206 167 209

Gray model # 374015 374018 374021 374044 374047 374073 374076 374079 374102 374105

list ea 112 134 142 112 134 144 175 217 176 220

• Perforated waste cup can be inverted to double as a bee hive strainer. • Yellow fiberglass grating or subway-style FEATURES: stainless steel grating.

model # list 305 x 305 FD-FG 1400 305 x 305 FD-SG 1864

Floor opening = 111⁄2˝ x 111⁄2˝ (292 x 292)

grate width x length in. mm

list each 338 431 469 513 554 475 505 542 592 643 613 657 677

model # 341169 341117 341123 340992 331006 341330 341110 341113 336992 345934 341109 351572 336976

Note:

Gray Fiberglass Grating available. To order add suffix “G” to model #. Example FD-FGG.

Freight class is 85.0. (•) MTS (made to stock) / ( ) MTO (made to order)

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


Hot Food Tables Accessories/Replacements Buffet Shelves ................................203 Chafing Dish Frames ......................206 Cutting Boards ................................205 Dish Shelves....................................204 Food Pans, Lids, Insets ..................207 Rolltop Cover ..................................206 Serving Shelves ......................202, 203 Spillage Pans ..................................206 Tray Shelves ....................................204 Tray Slides ......................................204

Hot Food Tables - Electric Buffet Style......................................209 Enclosed Base - Dry ................194-195 Open Base - Dry ......................190-191 Sealed Well - Wet or Dry ................193 Water Bath ......................................197

Hot Food Tables - Gas Enclosed Base - Dry ........................196 Open Base - Dry ..............................192 Water Bath ......................................198

All Others ........................202, 205-207

Cold Pan Units Buffet Style......................................210 Enclosed Base ................................199 Open Base ......................................200

Deluxe Service Mates/ Buffet Units

Solid Top Units Buffet Style......................................210 Enclosed Base ................................200 Open Base ......................................201

Tray Stands ......................202 Urn Stands ......................201

Accessories ....................................211 Beef Cart..........................................210 Cashiers Stand ................................211 Cold Pan Units ................................210 Hot Food Tables ..............................209 Solid Top Units ................................210

HOT TIPS ABOUT HOT FOOD TABLES Why EAGLE Is The Smart Choice For All Your Hot Food Table Needs…

It’s More Than Just The Stainless Steel Body… EAGLE Advantages Include: • Stainless steel body. • Full-height tubular legs and gusset assembly welded to body for quick and easy assembly. • 8˝ (203mm) wide cutting board. • Cutting board and optional shelves can be mounted on either or both sides of unit. • Optional bolted-on undershelf available. FLEX-MASTER® Overshelf System • 16 gauge type 304 stainless steel shelves. • Shelf widths are 10˝ and 15˝ (254 and 381mm). • Shelf height can be adjusted in 1˝ (25mm) increments without the use of tools. • Heat lamps can also be mounted underneath overshelves.

All of the features of the EAGLE hot food table offer benefits in style, strength and flexibility that are unmatched in our marketplace, and are standard on every hot food table from our product line. EAGLE is committed to providing you the highest quality products while maintaining the cost competitiveness necessary in today’s marketplace. For more information about the Chef’s Counter, see page 348, or request product announcement EG8123

189


HOT FOOD TABLES Catalog Section 30 • Table body and top are polished 22 gauge 430 series stainless steel. • Top openings are sized to accommodate 12˝ x 20˝ (305 x 508mm) food pans. • 8˝ (203mm) wide, 1⁄2˝ (13mm) thick poly cutting board. • Recessed control panel, infinite controls. • Each element has a rating of 500-watt at 120-volt and 750-watt at 240-volt. • 8˝ (203mm) deep insulated heating compartments lined with 22 gauge galvanized steel. • Galvanized adjustable undershelf. • 6´(1829mm) cord on right-hand side. • 301⁄2˝ (775mm) front-to-back including cutting board. • Primarily for dry operation, but adaptable for wet application with spillage pan.

Electric Hot Food Tables — Open Base Stationary see spec sheet

2-well stationary hot food table

EG30.00

3-well stationary unit

FEATURES:

Notes: 1000-watt heaters available for 208-volt and 240-volt models. To order, add suffix “-1” to model number and $66 per well to list price. Example: DHT2-240-1.

Receptacle Configurations Required

Bolted-in undershelf available. To specify, add 20% to list price of unit and add suffix “B” to model number. Example: DHT2-120B. 15A 125V

15A 250V

20A 250V

model # model # DHT2-120 DHT2-240 DHT3-120 DHT3-240

30A 250V

model # model # DHT4-240 DHT5-240

30A 125V

20A 3Ø 250V

model # DHT4-120

all three-phase models

Stainless steel liners in place of galvanized. Add $84 per compartment to list price of unit and add “S” after “HT” in model number. Example: DHTS3-120.

Freight class is 85.0.

furnished with furnished with furnished with furnished with furnished with furnished with NEMA 5-15 NEMA 6-15 NEMA 6-20 NEMA 6-30 NEMA 5-30 NEMA 15-20 plug plug plug plug plug plug

(•) MTS (made to stock) / ( ) MTO (made to order)

New York M.E.A. No. 376-84-E

Stainless steel legs & undershelf (prefix “SDHT”) / Galvanized legs & undershelf (prefix “DHT”) Non-marking adjustable plastic feet adjusts height of unit from 341⁄2˝ to 351⁄2˝ (876 to 902mm).

# of top length weight cu openings in. mm lbs. kg ft 2 2 2 2 3 3 3 3 4 4 4 4 5 5

33˝ 33˝ 33˝ 33˝ 48˝ 48˝ 48˝ 48˝ 631⁄2˝ 631⁄2˝ 631⁄2˝ 631⁄2˝ 79˝ 79˝

838 838 838 838 1219 1219 1219 1219 1613 1613 1613 1613 2007 2007

97 97 97 97 125 125 125 125 158 158 158 158 193 193

44.0 44.0 44.0 44.0 56.7 56.7 56.7 56.7 71.7 71.7 71.7 71.7 87.5 87.5

15.4 15.4 15.4 15.4 15.4 15.4 15.4 15.4 19.7 19.7 19.7 19.7 24.1 24.1

SINGLE-PHASE volts watts amps model # 120V 1000W 8.3A DHT2-120 • 120V 1000W 8.3A SDHT2-120 240V 1500W 6.25A DHT2-240 * 240V 1500W 6.25A SDHT2-240* 120V 1500W 12.5A DHT3-120 • 120V 1500W 12.5A SDHT3-120 • 240V 2250W 9.38A DHT3-240 *• 240V 2250W 9.38A SDHT3-240* 120V 2000W 16.6A DHT4-120 • 120V 2000W 16.6A SDHT4-120 240V 3000W 12.5A DHT4-240 *• 240V 3000W 12.5A SDHT4-240 *• 240V 3750W 15.6A DHT5-240 *• 240V 3750W 15.6A SDHT5-240 *

list 1588 1783 1588 1783 1791 2006 1791 2006 2434 2725 2434 2725 3060 3429

THREE-PHASE amps model # n/a n/a 5.4A 5.4A n/a n/a 5.4A 5.4A n/a n/a 8.3A 8.3A 10.8A 10.8A

n/a n/a

list

DHT2-240-3 * 1847 SDHT2-240-3* 2042 n/a n/a

n/a n/a

DHT3-240-3 * 2049 SDHT3-240-3* 2265 n/a n/a

DHT4-240-3 * SDHT4-240-3* DHT5-240-3 * SDHT5-240-3*

FLEX-MASTER® Overshelf Kits

190

see spec sheet EG30.20

n/a n/a

n/a n/a

2693 2984 3319 3688

* Available in 208 volt. To order replace suffix “-240” with suffix “-208”.

Both kits include two 16/304 overshelves and four 30˝ (762mm) posts. Add suffix specified to order kit (example: SDHT2-120-FM), or design your own using standard components from page 208.

Spillage Pans

description 10˝ (254mm) overshelves 15˝ (381mm) overshelves, plus one ladle rack

add suffix -FM -FMU

• Required for wet applications. • Deep-drawn, fully coved. • 61⁄2˝ (165mm) deep. Freight class is 100.0. weight description lbs. kg model # list stainless steel 7 3.2 302027 198 aluminum 3 1.4 304141 106

2-well 1202 1617

List Prices 3-well 4-well 1242 1290 1683 1755

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

5-well 1530 2155


HOT FOOD TABLES Catalog Section 30

Electric Hot Food Tables — Open Base Portable see spec sheet

EG30.01

4-well portable 5-well portable unit with optional FLEX-MASTER® overshelves

FEATURES:

Receptacle Configurations Required

15A 125V

15A 250V

20A 250V

30A 250V

• Table body and top are polished 22 gauge 430 series stainless steel. • Top openings are sized to accommodate 12˝ x 20˝ (305 x 508mm) food pans. • 8˝ (203mm) wide, 1⁄2˝ (13mm) thick poly cutting board. • Recessed control panel, infinite controls. • Each element has a rating of 500-watt at 120-volt and 750-watt at 240-volt. • 8˝ (203mm) deep insulated heating compartments lined with 22 gauge galvanized steel. • Galvanized adjustable undershelf. • 6´(1829mm) cord on right-hand side. • 301⁄2˝ (775mm) front-to-back including cutting board. • Primarily for dry operation, but adaptable for wet application with spillage pan. • 34˝ (864mm) height. Notes: 1000-watt heaters available for 208-volt and 240-volt models. To order, add suffix “-1” to model number and $66 per well to list price. Example: PDHT2-240-1.

30A 125V

Bolted-in undershelf available. To specify, add 20% to list price of unit and add suffix “B” to model number. Example: PDHT2-120B.

20A 3Ø 250V

model # model # model # model # model # all PDHT2-120 PDHT2-240 PDHT4-240 PDHT5-240 PDHT4-120 three-phase models PDHT3-120 PDHT3-240

Stainless steel liners in place of galvanized. Add $84 per compartment to list price of unit and add “S” after “HT” in model number. Example: PDHTS3-120.

furnished with furnished with furnished with furnished with furnished with furnished with NEMA 5-15 NEMA 6-15 NEMA 6-20 NEMA 6-30 NEMA 5-30 NEMA 15-20 plug plug plug plug plug plug

Freight class is 85.0. (•) MTS (made to stock) / ( ) MTO (made to order)

New York M.E.A. No. 376-84-E

Stainless steel legs & undershelf (prefix “SPDHT”) / Galvanized legs & undershelf (prefix “PDHT”) 4˝ (102mm) diameter NSF-approved ball-bearing casters (two swivel and two with brake), push bar attached to end panel at operator’s right, and drop brackets on cutting board.

# of top length weight cu openings in. mm lbs. kg ft 2 2 2 2 3 3 3 3 4 4 4 4 5 5

351⁄2˝ 351⁄2˝ 351⁄2˝ 351⁄2˝ 501⁄2˝ 501⁄2˝ 501⁄2˝ 501⁄2˝ 66˝ 66˝ 66˝ 66˝ 811⁄2˝ 811⁄2˝

902 902 902 902 1283 1283 1283 1283 1676 1676 1676 1676 2070 2070

97 97 97 97 125 125 125 125 158 158 158 158 193 193

44.0 44.0 44.0 44.0 56.7 56.7 56.7 56.7 71.7 71.7 71.7 71.7 87.5 87.5

15.4 15.4 15.4 15.4 15.4 15.4 15.4 15.4 19.7 19.7 19.7 19.7 24.1 24.1

SINGLE-PHASE volts watts amps model # 120V 1000W 8.3A PDHT2-120 120V 1000W 8.3A SPDHT2-120 240V 1500W 6.25A PDHT2-240 * 240V 1500W 6.25A SPDHT2-240 * 120V 1500W 12.5A PDHT3-120 • 120V 1500W 12.5A SPDHT3-120 • 240V 2250W 9.38A PDHT3-240 * 240V 2250W 9.38A SPDHT3-240 * 120V 2000W 16.6A PDHT4-120 • 120V 2000W 16.6A SPDHT4-120 240V 3000W 12.5A PDHT4-240 * 240V 3000W 12.5A SPDHT4-240 * 240V 3750W 15.6A PDHT5-240 * 240V 3750W 15.6A SPDHT5-240 *

list 1958 2193 1958 2193 2160 2416 2160 2416 2963 3319 2963 3319 3642 4076

THREE-PHASE amps model # n/a n/a 5.4A 5.4A n/a n/a 5.4A 5.4A n/a n/a 8.3A 8.3A 10.8A 10.8A

n/a n/a

list

PDHT2-240-3 * 2217 SPDHT2-240-3* 2452 n/a n/a

n/a n/a

PDHT3-240-3 * 2419 SPDHT3-240-3* 2675 n/a n/a

n/a n/a

PDHT4-240-3 * 3222 SPDHT4-240-3* 3578 PDHT5-240-3 * 3901 SPDHT5-240-3* 4335

FLEX-MASTER® Overshelf Kits description 10˝ (254mm) overshelves 15˝ (381mm) overshelves, plus one ladle rack

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

see spec sheet EG30.20

n/a n/a

* Available in 208 volt. To order replace suffix “-240” with suffix “-208”.

Both kits include two 16/304 overshelves and four 30˝ (762mm) posts. Add suffix specified to order kit (example: PDHT2-120-FM), or design your own using standard components from page 208.

Spillage Pans

add suffix -FM -FMU

• Required for wet applications. • Deep-drawn, fully coved. • 61⁄2˝ (165mm) deep. Freight class is 100.0. weight description lbs. kg model # list stainless steel 7 3.2 302027 198 aluminum 3 1.4 304141 106

2-well 1202 1617

List Prices 3-well 4-well 1242 1290 1683 1755

5-well 1530 2155

191


HOT FOOD TABLES Catalog Section 30

Gas Hot Food Tables — Open Base see spec sheet

EG30.02

FEATURES:

2-well unit

• Table body and top are polished 22 gauge 430 series stainless steel. • Top openings are sized to accommodate 12˝ x 20˝ (305 x 508mm) food pans. • 8˝ (203mm) wide, 1⁄2˝ (13mm) thick poly cutting board. • Recessed control panel; individual controls. • High-output jet burners rated at 3500 BTUs. • 8˝ (203mm) deep insulated heating compartments lined with heavy gauge galvanized steel. • Adjustable galvanized undershelf. • Adjustable non-marking plastic feet. • Cutting board can be mounted on either side of unit. • 301⁄2˝ (775mm) front-to-back including cutting board, • Adjustable from 341⁄2˝ to 351⁄2˝ (876 to 902mm) height. Note:

To order LP gas models. Insert suffix “-LP” in place of “-NG” in appropriate model number. Example: HT2-LP. Bolted-in undershelf available. To specify, add 20% to list price of unit and add suffix “B” to model number. Example: HT2-NGB. Stainless steel liners in place of galvanized. Add $84 per compartment to list price of unit and add “S” after “HT” in model number. Example: HTS2-NG. Units with thermostatic control. Add $402 per well to list price and suffix “T”. Example HT2-NGT. Auto safety pilot. Add $253 per well to list price and suffix “S”. Example HT2-NGS. Units with thermostatic control and auto safety pilot. Add $655 per well to list price and suffix “TS”. Example HT2-NGTS.

3-well unit shown with optional FLEX-MASTER® overshelves

⁄2˝ (13mm) N.P.T. pipe connection is on right side.

1

Freight class is 85.0. Models with prefix “S” indicate standard stainless steel undershelf and legs. # of top length weight openings in. mm lbs. kg 2 2 3 3 4 4 5 5

33˝ 33˝ 48˝ 48˝ 631⁄2˝ 631⁄2˝ 79˝ 79˝

838 838 1219 1219 1613 1613 2007 2007

97 97 125 125 158 158 193 193

44.0 44.0 56.7 56.7 71.7 71.7 87.5 87.5

cu ft

total BTU rating

15.4 15.4 15.4 15.4 19.7 19.7 24.1 24.1

7,000 7,000 10,500 10,500 14,000 14,000 17,500 17,500

model # HT2-NG • SHT2-NG HT3-NG • SHT3-NG HT4-NG • SHT4-NG HT5-NG • SHT5-NG

(•) MTS (made to stock) / ( ) MTO (made to order)

list 1612 1789 1931 2145 2363 2626 2845 3161

Spillage Pans see spec sheet

EG30.20

FLEX-MASTER® Overshelf Kits Both kits include two 16/304 overshelves and four 30˝ (762mm) posts. Add suffix specified to order kit (example: SHT2-NG-FM), or design your own using standard components from page 208. description 10˝ (254mm) overshelves 15˝ (381mm) overshelves, plus one ladle rack

add suffix -FM -FMU

2-well 1202 1617

List Prices 3-well 4-well 1242 1290 1683 1755

New York M.E.A. No. 375-84-E

192

5-well 1530 2155

• Required for wet applications. • Deep-drawn, fully coved. • 61⁄2˝ (165mm) deep. Freight class is 100.0. description

weight lbs. kg

stainless steel aluminum

7 3

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

3.2 1.4

model # 302027 304141

list 198 106


HOT FOOD TABLES Catalog Section 30

Sealed Well Hot Food Tables see spec sheet

• 34˝ (864mm) height. • Sealed-in heat wells, each with individual controls, allow for wet or dry application. • Open base. • Built-in drainage eliminates the need for spillage pans, reducing clean-up time. • All type 430 stainless steel construction. • Stainless steel legs. • Stainless steel gussets. • Heavy gauge stainless steel adjustable undershelf. • Poly cutting board. • Stainless steel dish shelf. • Each element has a rating of 750-watt at 120-volt and 950-watt at 240-volt. • 6´(1829mm) cord and plug.

EG30.19

3-compartment stationary unit

FEATURES:

Notes: Bolted-in undershelf available. To specify, add 20% to list price of unit and add suffix “B” to model number. Example: SHT2A-240B.

Receptacle Configurations Required

Freight class is 85.0. 15A 125V

15A 250V

20A 250V

30A 125V

30A 250V

50A 125V

(•) MTS (made to stock) / ( ) MTO (made to order)

20A 3Ø 250V

model # model # model # model # model # model # all S(P)HT2-120 S(P)HT2-240 S(P)HT4-240 S(P)HT3-120 S(P)HT5-240 S(P)HT4-120 three-phase models S(P)HT3-240 furnished with furnished with furnished with furnished with furnished with furnished with NEMA 5-15 NEMA 6-15 NEMA 6-20 NEMA 5-30 NEMA 6-30 NEMA 5-50 plug plug plug plug plug plug

furnished with NEMA 15-20 plug

New York M.E.A. No. 376-84-E

Stationary Non-marking adjustable plastic feet adjusts height of unit from 341⁄2˝ to 351⁄2˝ (876 to 902mm).

# of top length weight cu SINGLE-PHASE openings in. mm lbs. kg ft volts watts amps model # 2 33˝ 838 101 45.8 7.9 120V 1500W 12.5A SHT2-120 2 33˝ 838 101 45.8 11.5 240V 1900W 7.9A SHT2-240 * 3 48˝ 1219 129 58.5 11.5 120V 2250W 18.8A SHT3-120 • 3 48˝ 1219 129 58.5 11.5 240V 2850W 11.9A SHT3-240 * • 4 631⁄2˝ 1613 162 73.5 15.3 120V 3000W 25.0A SHT4-120 • 4 631⁄2˝ 1613 162 73.5 15.3 240V 3800W 15.8A SHT4-240 *• 5 79˝ 2007 199 90.3 19.0 240V 4750W 19.8A SHT5-240 * •

THREE-PHASE list amps model # 2891 n/a n/a 2891 6.9A SHT2-240-3 * 3827 n/a n/a 3827 6.9A SHT3-240-3* 4695 n/a n/a 4695 10.5A SHT4-240-3* 5759 13.7A SHT5-240-3 *

list n/a

3149 n/a

4086 n/a

4954 6018

AutoFill® automatic water fill system available. NSF- and UL-approved. To order, add $846 to list price and add “A” in front of the dash in model number. Example: SHT2A-240.

FLEX-MASTER® Overshelf Kits

see page 196.

* Available in 208 volt. To order replace suffix “-240” with suffix “-208”. Wattage for 208-volt models is 714 watts per well.

Portable 4˝ (102mm) diameter NSF-approved ball-bearing swivel casters (two with brake), and push bar attached to end panel at operator’s right.

# of top length weight cu SINGLE-PHASE openings in. mm lbs. kg ft volts watts amps model # 2 351⁄2˝ 902 101 45.8 7.9 120V 1500W 12.5A SPHT2-120 2 351⁄2˝ 902 101 45.8 11.5 240V 1900W 7.9A SPHT2-240 * 3 501⁄2˝ 1283 129 58.5 11.5 120V 2250W 18.8A SPHT3-120 3 501⁄2˝ 1283 129 58.5 11.5 240V 2850W 11.9A SPHT3-240 * 4 66˝ 1676 162 73.5 15.3 120V 3000W 25.0A SPHT4-120 4 66˝ 1676 162 73.5 15.3 240V 3800W 15.8A SPHT4-240 * 5 811⁄2˝ 2070 199 90.3 19.0 240V 4750W 19.8A SPHT5-240 *

list 2984 2984 3951 3951 4765 4765 6047

THREE-PHASE amps model # n/a 6.9A n/a 6.9A n/a 10.5A 13.7A

n/a

list n/a

SPHT2-240-3 * 3243 n/a

n/a

SPHT3-240-3 * 4209 n/a

n/a

SPHT4-240-3 * 5024 SPHT5-240-3 * 6306

* Available in 208 volt. To order replace suffix “-240” with suffix “-208”. Wattage for 208-volt models is 714 watts per well.

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

193


HOT FOOD TABLES Catalog Section 30

SPEC-MASTER® Electric Hot Food Tables Enclosed Base Stationary see spec sheet

EG30.04

OUR BEST

3-well enclosed base hot food table shown with optional FLEX-MASTER® overshelves

FEATURES:

• 20 gauge table body and 22 gauge top are polished type 430 series stainless steel. • Top openings are sized to accommodate 12˝ x 20˝ (305 x 508mm) food pans. • 8˝ (203mm) wide, 1⁄2˝ (13mm) thick poly cutting board. • Recessed control panel; individual thermostatic controls. • Each element has a rating of 750-watt at both 120-volt and 240-volt. • 8˝ (203mm) deep insulated heating compartments lined with 22 gauge galvanized steel. • 301⁄2˝ (775mm) front-to-back including cutting board. • Primarily for dry operation, but adaptable for wet application with spillage pan (see page 206). • Available with open front or 22 gauge stainless steel sliding doors. Notes: 1000-watt heaters available for 208-volt and 240-volt models. To order, add suffix “-1” to model number and $66 per well to list price. Example: HT4OB-240-1. Stainless steel liners in place of galvanized. Add $84 per compartment to list price of unit and add “S” after “HT” in model number. Example: HTS3CB-120.

Freight class is 85.0. (•) MTS (made to stock) / ( ) MTO (made to order) Non-marking adjustable plastic feet adjusts height of unit from 341⁄2˝ to 351⁄2˝ (876 to 902mm)

All stationary units designed for field wiring.

Open Front # of top length weight cu SINGLE-PHASE openings in. mm lbs. kg ft volts watts amps model # list 2 33˝ 838 200 90.7 28.7 120V 1500W 12.5A HT2OB-120 4467 2 33˝ 838 200 90.7 28.7 240V 1500W 6.3A HT2OB-240* 4467 3 48˝ 1219 240 108.9 39.8 120V 2250W 18.8A HT3OB-120 5108 3 48˝ 1219 240 108.9 39.8 240V 2250W 9.4A HT3OB-240* 5108 4 631⁄2˝ 1613 280 127.0 51.5 120V 3000W 25.0A HT4OB-120 5676 4 631⁄2˝ 1613 280 127.0 51.5 240V 3000W 12.5A HT4OB-240* 5975 5 79˝ 2007 320 145.2 62.6 240V 3750W 15.7A HT5OB-240* 7148 6 941⁄2˝ 2400 363 164.7 74.3 240V 4500W 18.8A HT6OB-240* 8352

Sliding Doors

THREE-PHASE SINGLE-PHASE amps model # list amps model # list n/a n/a n/a 12.5A HT2CB-120 5904 5.4A HT2OB-240-3*4726 6.3A HT2CB-240 * 6215 n/a n/a n/a 18.8A HT3CB-120 7222 5.4A HT3OB-240-3*5367 9.4A HT3CB-240 * 7222 n/a n/a n/a 25.0A HT4CB-120 8246 8.3A HT4OB-240-3*6234 12.5A HT4CB-240 * 8246 10.8A HT5OB-240-3*7407 15.7A HT5CB-240 * 10445 10.8A HT6OB-240-3*8611 18.8A HT6CB-240 * 11906

THREE-PHASE amps model # list n/a 5.4A n/a 5.4A n/a 8.3A 10.8A 10.8A

n/a

n/a

HT2CB-240-3* 6474 n/a

n/a

HT3CB-240-3* 7481 n/a

n/a

HT4CB-240-3* 8505 HT5CB-240-3*10704 HT6CB-240-3*12165

* Available in 208 volt. To order replace suffix “-240” with suffix “-208”.

SPEC-MASTER® Marine Edge For front edge only. Heavy gauge type 304 stainless steel. Retards spillage.

FLEX-MASTER® Overshelf Kits Both kits include two 16/304 overshelves and four 30˝ (762mm) posts. Add suffix specified to order kit (example: HT20B-120-FM), or design your own using standard components from page 208. description 10˝ (254mm) overshelves 15˝ (381mm) overshelves, plus one ladle rack

add suffix -FM -FMU

2-well 1202 1617

List Prices 3-well 4-well 1242 1290 1683 1755

5-well 1530 2155

Consult factory. Decorative Laminates Standard Wilsonart® Black trimmed in stainless steel. A variety of patterns and colors to choose from. Hundreds of laminates available.

Consult factory.

194

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


HOT FOOD TABLES Catalog Section 30

SPEC-MASTER® Electric Hot Food Tables Enclosed Base Portable see spec sheet

• • • •

EG30.05

OUR BEST

• • • • 3-well portable enclosed hot food table shown with optional rolltop and insets

• • • •

FEATURES: 5˝ (127mm) diameter NSF-approved ball-bearing swivel casters (two with brake), push bar attached to end panel at operator’s right, and drop brackets on cutting board.

Receptacle Configurations Required

Optional FLEX-MASTER® Overshelf Kits see page 196

Full perimeter vinyl bumper guards. 6´(1829mm) cord. 34˝ (864mm) height. 20 gauge table body and 22 gauge top are polished type 430 series stainless steel. Top openings are sized to accommodate 12˝ x 20˝ (305 x 508mm) food pans. 8˝ (203mm) wide, 1⁄2˝ (13mm) thick poly cutting board. Recessed control panel; individual thermostatic controls. Each element has a rating of 750-watt at both 120-volt and 240-volt. 8˝ (203mm) deep insulated heating compartments lined with 22 gauge galvanized steel. 301⁄2˝ (775mm) front-to-back including cutting board. Primarily for dry operation, but adaptable for wet application with spillage pan (see page 206). Available with open front or 22 gauge stainless steel sliding doors.

Notes: 1000-watt heaters available for 208-volt and 240-volt models. To order, add suffix “-1” to model number and $66 per well to list price. Example: PHT4OB-240-1. Stainless steel liners in place of galvanized. Add $84 per compartment to list price of unit and add “S” after “HT” in model number. Example: PHTS3CB-120.

Freight class is 85.0. (•) MTS (made to stock) / ( ) MTO (made to order) 15A 125V

20A 250V

30A 250V

30A 125V

50A 125V

20A 3Ø 250V

model # model # model # model # model # all PHT2OB-120 PHT2OB-240 PHT6OB-240 PHT3OB-120 PHT4OB-120 three-phase models PHT2CB-120 PHT2CB-240 PHT6OB-240 PHT3CB-120 PHT4CB-120 PHT3OB-240 PHT3CB-240 PHT4OB-240 PHT4CB-240 PHT5OB-240 PHT5CB-240

SPEC-MASTER® Marine Edge For front edge only. Heavy gauge type 304 stainless steel. Retards spillage. Consult factory.

Decorative Laminates Standard Wilsonart® Black trimmed in stainless steel. A variety of patterns and colors to choose from. Hundreds of laminates available.

furnished with furnished with furnished with furnished with furnished with furnished with NEMA 5-15 NEMA 6-20 NEMA 6-30 NEMA 5-30 NEMA 5-50 NEMA 15-20 plug plug plug plug plug plug

Consult factory.

New York M.E.A. No. 376-84-E

Open Front # of top length weight cu SINGLE-PHASE openings in. mm lbs. kg ft volts watts amps model # list 2 353⁄4˝ 908 200 90.7 28.7 120V 1500W 12.5A PHT2OB-120 5447 2 353⁄4˝ 908 200 90.7 28.7 240V 1500W 6.3A PHT2OB-240 * 5447 3 503⁄4˝ 1289 240 108.9 39.8 120V 2250W 18.8A PHT3OB-120 6746 3 503⁄4˝ 1289 240 108.9 39.8 240V 2250W 9.4A PHT3OB-240 * 6746 4 661⁄4˝ 1683 280 127.0 51.5 120V 3000W 25.0A PHT4OB-120 7654 4 661⁄4˝ 1683 280 127.0 51.5 240V 3000W 12.5A PHT4OB-240 * 7654 5 813⁄4˝ 2076 320 145.2 62.6 240V 3750W 15.7A PHT5OB-240 * 9735 6 971⁄4˝ 2470 363 164.7 74.3 240V 4500W 18.8A PHT6OB-240 * 11033

THREE-PHASE amps model # n/a 5.4A n/a 5.4A n/a 8.3A 10.8A 10.8A

n/a

Sliding Doors list n/a

PHT2OB-240-3 * 5706 n/a

n/a

PHT3OB-240-3 * 7005 n/a

n/a

PHT4OB-240-3 * 7913 PHT5OB-240-3 * 9994 PHT6OB-240-3 *11292

SINGLE-PHASE amps model # 12.5A PHT2CB-120 6.3A PHT2CB-240* 18.8A PHT3CB-120 9.4A PHT3CB-240* 25.0A PHT4CB-120 12.5A PHT4CB-240* 15.7A PHT5CB-240* 18.8A PHT6CB-240*

list 6543 6543 7602 7602 8682 8682 10995 12533

THREE-PHASE amps model # n/a 5.4A n/a 5.4A n/a 8.3A 10.8A 10.8A

n/a

list n/a

PHT2CB-240-3* 6802 n/a

n/a

PHT3CB-240-3* 7861 n/a

n/a

PHT4CB-240-3* 8941 PHT5CB-240-3* 11254 PHT6CB-240-3* 12792

* Available in 208 volt. To order replace suffix “-240” with suffix “-208”. 100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

195


HOT FOOD TABLES Catalog Section 30

SPEC-MASTER® Gas Hot Food Tables Enclosed Base see spec sheet

EG30.06

OUR BEST

FEATURES:

• 20 gauge outer wrapper and 22 gauge top are polished type 430 series stainless steel. • Top openings are sized to accommodate 12˝ x 20˝ (305 x 508mm) food pans. • 8˝ (203mm) wide, 1⁄2˝ (13mm) thick poly cutting board. • Recessed control panel; individual controls. • High-output jet burners rated at 3500 BTUs. • 8˝ (203mm) deep insulated heating compartments lined with heavy gauge galvanized steel. • Stainless steel bottom shelf. • Stainless steel legs. • Adjustable non-marking plastic feet. • Open front or 22 gauge stainless steel sliding doors. • 341⁄2˝ to 351⁄2˝ (876 to 902mm) adjustable height. Note:

Units with thermostatic control. Add $402 per well to list price and suffix “T”. Example HT2CB-NGT. Auto safety pilot. Add $253 per well to list price and suffix “S”. Example HT2CB-NGS.

4-well enclosed base unit

Units with thermostatic control and auto safety pilot. Add $655 per well to list price and suffix “TS”. Example HT2CB-NGTS.

Decorative Laminates ®

Standard Wilsonart Black trimmed in stainless steel. A variety of patterns and colors to choose from. Hundreds of laminates available. Consult factory.

Stainless steel liners in place of galvanized. Add $84 per compartment to list price of unit and add “S” after “HT” in model number. Example: HTS4OB-NG. ⁄2˝ (13mm) N.P.T. pipe connection is on right side.

1

®

SPEC-MASTER Marine Edge

Freight class is 85.0.

For front edge only. Heavy gauge type 304 stainless steel. Retards spillage.

(•) MTS (made to stock) / ( ) MTO (made to order)

New York M.E.A. No. 375-84-E Vol. II

Open Front # of top length weight openings in. mm lbs. kg 2 3 4 5 6 Note:

33˝ 48˝ 631⁄2˝ 79˝ 941⁄2˝

838 1219 1613 2007 2400

207 248 289 330 375

93.9 112.5 131.1 149.7 170.1

cu ft

total BTU rating

28.7 39.8 51.5 62.6 74.3

7,000 10,500 14,000 17,500 21,000

model # HT2OB-NG HT3OB-NG HT4OB-NG HT5OB-NG HT6OB-NG

Sliding Doors list 3917 4477 5244 6269 7325

model # HT2CB-NG HT3CB-NG HT4CB-NG HT5CB-NG HT6CB-NG

list 4039 4616 5406 6463 7175

To order LP gas models, insert suffix “-LP” in place of “-NG” in appropriate model number. Example: HT2OB-LP.

FLEX-MASTER® Overshelf Kits Both kits include two 16/304 overshelves and four 30˝ (762mm) posts. Add suffix specified to order kit (example: HT20B-NG-FM), or design your own using standard components from page 208. description 10˝ (254mm) overshelves 15˝ (381mm) overshelves, plus one ladle rack

196

add suffix -FM -FMU

2-well 1202 1617

List Prices 3-well 4-well 1242 1290 1683 1755

5-well 1530 2155

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


HOT FOOD TABLES Catalog Section 30

Electric Water Bath Steam Tables see spec sheet

EG30.13

FEATURES:

• Constructed of highly polished stainless steel— 304 series for water pan and 430 series for tops and enclosures. • Top is removable for cleaning or replacement. • All-welded water pan is 16 gauge with recessed well and accommodates a copper sheathed immersion heater assembly complete with thermostatic control and low water cutoff. • All wiring terminates within junction box adjacent to control. • Legs are 15⁄8˝ (41mm) diameter galvanized tubing fitted with adjustable non-marking plastic feet. • Undershelf is galvanized steel. • All top openings are sized to accommodate 12˝ x 20˝ (305 x 508mm) food pans. • 8˝ (203mm) wide x 1⁄2˝ (13mm) thick poly cutting board and stainless steel dish shelf. • 341⁄2˝ to 351⁄2˝ (876 to 902mm) adjustable height. • All units are single phase. Note:

Units are designed for field wiring by others. Bolted-in undershelf available. To specify, add 20% to list price of unit and add suffix “B” to model number. Example: WT2-208B.

3-well water bath steam table shown with optional FLEX-MASTER® overshelves

Freight class is 85.0. (•) MTS (made to stock) / ( ) MTO (made to order)

New York M.E.A. No. 330-84-E

Prefix “S” indicate that stainless steel undershelf and legs are standard. # of top length weight openings in. mm lbs. kg 2 2 2 2 3 3 3 3 4 4 4 4 5 5 5 5

33˝ 33˝ 33˝ 33˝ 48˝ 48˝ 48˝ 48˝ 631⁄2˝ 631⁄2˝ 631⁄2˝ 631⁄2˝ 79˝ 79˝ 79˝ 79˝

838 838 838 838 1219 1219 1219 1219 1613 1613 1613 1613 2007 2007 2007 2007

94 94 94 94 125 125 125 125 146 146 146 146 183 183 183 183

42.6 42.6 42.6 42.6 56.7 56.7 56.7 56.7 66.2 66.2 66.2 66.2 83.0 83.0 83.0 83.0

cu ft 15.4 15.4 15.4 15.4 15.4 15.4 15.4 15.4 19.7 19.7 19.7 19.7 24.1 24.1 24.1 24.1

electrical data 3000W, 208V, 14.4A 3000W, 208V, 14.4A 3000W, 240V, 12.5A 3000W, 240V, 12.5A 3000W, 208V, 14.4A 3000W, 208V, 14.4A 3000W, 240V, 12.5A 3000W, 240V, 12.5A 4000W, 208V, 19.2A 4000W, 208V, 19.2A 4000W, 240V, 16.7A 4000W, 240V, 16.7A 5000W, 208V, 24.1A 5000W, 208V, 24.1A 5000W, 240V, 20.8A 5000W, 240V, 20.8A

model # WT2-208 SWT2-208 WT2-240 SWT2-240 WT3-208 SWT3-208 WT3-240 SWT3-240 WT4-208 SWT4-208 WT4-240 SWT4-240 WT5-208 SWT5-208 WT5-240 SWT5-240

list 4747 5219 4747 5219 5182 5700 5182 5700 5889 6475 5889 6475 6221 6841 6221 6841

FLEX-MASTER® Overshelf Kits Both kits include two 16/304 overshelves and four 30˝ (762mm) posts. Add suffix specified to order kit (example: WT2-208-FM), or design your own using standard components from page 208.

description 10˝ (254mm) overshelves 15˝ (381mm) overshelves, plus one ladle rack

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

AutoFill® automatic water fill system available. For models with drain. NSF- and UL-approved. To order, add $846 to list price and add “A” in front of the dash in model number. Example: WT3A-208.

add suffix -FM -FMU

2-well 1202 1617

List Prices 3-well 4-well 1242 1290 1683 1755

5-well 1530 2155

197


HOT FOOD TABLES Catalog Section 30

Gas Water Bath Steam Tables see spec sheet

EG30.12

3-well water bath steam table

FEATURES: New York M.E.A. No. 318-84-E

• Constructed of highly polished stainless steel – 304 series for water pan and 430 series for tops and enclosures. • Top and water pan are removable for cleaning or replacement. • Furnished with a straight flow tubular gas burner and pressure regulator as standard equipment. • Legs are 15⁄8˝ (41mm) diameter galvanized tubing fitted with adjustable non-marking plastic feet. • Undershelf is galvanized steel. • All top openings accommodate 12˝ x 20˝ (305 x 508mm) food pans. • 8˝ (203mm) wide x 1⁄2˝ 13mm thick poly cutting board and stainless steel dish shelf. • 341⁄2˝ to 351⁄2˝ (876 to 902mm) adjustable height. Note:

Standard stainless steel legs and undershelf. Add 10% to list price of unit and prefix “S” to model number after letter “A”. Example: ASWT2-NG. Bolted-on undershelf available. To specify, add 20% to list price of unit and add suffix “B” to model number. Example: AWT2-NGB. AutoFill® automatic water fill system available for models with drain. NSF- and UL-approved. To order, add $846 to list price and add “A” in front of the dash in model number. Example: AWT2A-NG. ⁄2˝ (13mm) N.P.T. pipe connection is on right side.

1

Freight class is 85.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Prefix “AWTP” come with safety pilots with automatic shut-off features. description

weight lbs. kg

33˝ (838mm) long unit with 2 top openings as above, with safety pilot replacement top replacement water pan 48˝ (1219mm) long unit with 3 top openings as above, with safety pilot replacement top replacement water pan 631⁄2˝ (1613mm) long unit with 4 top openings as above, with safety pilot replacement top replacement water pan 631⁄2˝ (1613mm) long unit with 8 top openings as above, with safety pilot replacement top replacement water pan 79˝ (2007mm) long unit with 5 top openings as above, with safety pilot replacement top replacement water pan

94 96 — — 125 130 — — 146 151 — — 146 151 — — 183 189 — —

Note:

198

42.6 43.5 — — 56.7 59.0 — — 66.2 68.5 — — 66.2 68.5 — — 83.0 85.7 — —

cu ft 15.4 15.4 — — 15.4 15.4 — — 19.7 19.7 — — 19.7 19.7 — — 24.1 24.1 — —

model # AWT2-NG • AWTP2-NG 305169 305315 AWT3-NG • AWTP3-NG 305170 305313 AWT4-NG • AWTP4-NG 305171 305314 AWT4-NG-1 AWTP4-NG-1 305259 305314 AWT5-NG • AWTP5-NG 305172 305316

list 2113 2405 302 499 2359 2866 372 554 2984 3677 487 724 2984 3677 487 724 3575 4457 531 914

Optional FLEX-MASTER® Overshelf Kits see page 197 2 Top Openings 15,000 BTU total. Accommodates two 12˝ x 20˝ (305 x 508mm) food pans.

3 Top Openings 15,000 BTU total. Accommodates three 12˝ x 20˝ (305 x 508mm) food pans.

4 Top Openings 30,000 BTU total. Accommodates four 12˝ x 20˝ (305 x 508mm) food pans.

8 Top Openings 30,000 BTU total. Accommodates two 12˝ x 20˝ (305 x 508mm) food pans, two 61⁄2˝ (165mm) diameter 4-quart insets, and four 81⁄2˝ (216mm) diameter 7-quart insets.

5 Top Openings 30,000 BTU total. Accommodates five 12˝ x 20˝ (305 x 508mm) food pans.

To order LP gas models, insert suffix “-LP” in place of “-NG” in appropriate model number. Example: AWT2-LP. 100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


HOT FOOD TABLES Catalog Section 30 • 20˝ (508mm) wide x 6˝ (152mm) deep cold pans made of 304 series stainless steel with 1˝ (25mm) IP.S. drain connection. • Highly polished 20 gauge stainless steel table body. • 15⁄8˝ (41mm) diameter stainless steel tubular legs with non-marking plastic feet. • Stainless steel bottom shelf is full depth of unit and welded to outer wrapper. • 229⁄16˝ (573mm) front-to-back. • 341⁄2˝ to 351⁄2˝ (876 to 902mm) adjustable height.

SPEC-MASTER® Cold Pan Units Enclosed Base see spec sheet

OUR BEST

EG30.08

Top-of-the-line stationary cold pan units! FEATURES:

Note: Casters. Add prefix “P” and add $226 to list price. Example: PCP3OB. Center shelf. Add 20% to list price of unit. For optional accessories and replacements, see pages 202-208.

Freight class is 100.0. (•) MTS (made to stock) / ( ) MTO (made to order)

SPEC-MASTER® Marine Edge For front edge only. Heavy gauge type 304 stainless steel. Retards spillage.

Decorative Laminates Standard Wilsonart® Black trimmed in stainless steel. A variety of patterns and colors to choose from. Hundreds of laminates available.

shown with optional marine edge, laminate front & tray slide

Consult factory for SPEC-MASTER® Marine edge and decorative laminate.

Open Front length in. mm

cubic feet

weight lbs. kg

48˝ 631⁄2˝ 79˝

39.8 51.5 62.6

230 270 310

1219 1613 2007

104.3 122.5 140.6

model # CP3OB CP4OB CP5OB

Sliding Doors list 3547 3846 4061

weight lbs. kg 235 275 315

106.6 124.7 142.9

model # CP3CB CP4CB CP5CB

list 4544 5068 5380

Service for over 60 years.

Quality... Value... Reliability!

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

199


HOT FOOD TABLES Catalog Section 30

Cold Pan Units – Open Base see spec sheet

EG30.15

FEATURES:

• Fully insulated units feature 20˝ (508mm) wide x 6˝ (152mm) deep cold pans made of 304 series stainless steel with 11⁄2˝ (38mm) NPS drain connection. • Table body is highly polished 22 gauge stainless steel. • Galvanized tubular legs and galvanized undershelf. • All units are 229⁄16˝ (573mm) front-to-back. Note:

Stationary models Non-marking adjustable feet that adjust height of unit from 341⁄2˝ to 351⁄2˝ (876 to 902mm).

Portable models 4˝ (102mm) diameter swivel casters (two with brakes) and push handle.

shown with optional laminated hardwood cutting board

Bolted-in undershelf available. To specify, add 20% to list price of unit and add suffix “B” to model number. Example: CP-3B. For optional accessories and replacements, see pages 202-208.

Freight class is 100.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Prefix “S” indicate standard stainless steel undershelf and legs.

Stationary length in. mm

cubic feet

weight lbs. kg

48˝ 48˝ 631⁄2˝ 631⁄2˝ 79˝ 79˝

15.4 15.4 19.7 19.7 24.1 24.1

93 93 112 112 133 133

1219 1219 1613 1613 2007 2007

42.2 42.2 50.8 50.8 60.3 60.3

model # CP-3 SCP-3 CP-4 SCP-4 CP-5 SCP-5

Portable* weight lbs. kg

list 1484 1747 1821 2124 2100 2472

99 99 118 118 139 139

44.9 44.9 53.5 53.5 63.1 63.1

model # PCP-3 SPCP-3 PCP-4 SPCP-4 PCP-5 SPCP-5

list 1576 2213 1880 2602 2501 2942

* For portable models, add 21⁄2˝ (64mm) to length.

• 16 gauge stainless steel top with table body made of 20 gauge 430 series stainless steel. • 15⁄8˝ (41mm) diameter stainless steel tubular legs with adjustable non-marking plastic feet. • Stainless steel bottom shelf that is full depth of unit and welded to outer wrapper. • 229⁄16˝ (573mm) front-to-back. • Recessed handle and rollerless track assembly.

SPEC-MASTER® Solid Top Units Enclosed Base see spec sheet

EG30.09

OUR BEST Top-of-the-line stationary solid top units!

FEATURES:

Note: Casters. Add prefix “P” and add $238 to list price. Example: PST40B. Center shelf. Add 20% to list price of unit. Optional accessories and replacements see pages 202-208.

unit shown with optional laminated hardwood cutting board

Freight class is 100.0.

Open Front length in. mm 48˝ 1219 631⁄2˝ 1613 79˝ 2007

cubic weight feet lbs. kg model # 39.8 225 102.1 ST3OB 51.5 265 120.2 ST4OB 62.6 305 138.3 ST5OB

Sliding Doors list 3963 4617 5713

weight lbs. kg 233 274 315

105.7 124.3 142.9

model # ST3CB ST4CB ST5CB

(•) MTS (made to stock) / ( ) MTO (made to order)

list 5000 5879 6688

Decorative Laminates ®

Standard Wilsonart Black trimmed in stainless steel. A variety of patterns and colors to choose from. Hundreds of laminates available.

200

SPEC-MASTER® Marine Edge For front edge only. Heavy gauge type 304 stainless steel. Retards spillage.

Consult factory.

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


HOT FOOD TABLES Catalog Section 30

Solid Top Units – Open Base see spec sheet

• • • • • •

EG30.14

FEATURES:

Stationary models Non-marking adjustable feet that adjust height of unit from 341⁄2˝ to 351⁄2˝ (876 to 902mm).

Portable models 4˝ (102mm) diameter swivel casters (two with brakes) and push handle.

shown with optional laminated hardwood cutting board

Type 430 construction 22 gauge stainless steel body. 16 gauge stainless steel top. Galvanized tubular legs. Galvanized undershelf. 229⁄16˝ (573mm) front-to-back.

Note: Bolted-in undershelf available. To specify, add 20% to list price of unit and add suffix “B” to model number. Example: ST-3B. For optional accessories and replacements, see pages 202-208.

Freight class is 85.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Prefix “S” indicate standard stainless steel undershelf and legs.

Stationary length in. mm

cubic feet

weight lbs. kg

48˝ 48˝ 631⁄2˝ 631⁄2˝ 79˝ 79˝

15.4 15.4 19.7 19.7 24.1 24.1

83 83 102 102 123 123

1219 1219 1613 1613 2007 2007

37.6 37.6 46.3 46.3 55.8 55.8

model # ST-3 SST-3 ST-4 SST-4 ST-5 SST-5

Portable* list 1159 1354 1345 1569 1671 1948

weight lbs. kg 89 89 108 108 129 129

40.4 40.4 49.0 49.0 58.5 58.5

model # PST-3 SPST-3 PST-4 SPST-4 PST-5 SPST-5

list 1545 1804 1734 2022 2056 2396

* For portable models, add 21⁄2˝ (64mm) to length.

Urn Stands see spec sheet

• • • •

EG30.10

• •

FEATURES:

• •

Stationary, enclosed base. 16 gauge stainless steel top. 20 gauge stainless steel table body. Stainless steel tubular legs with adjustable non-marking plastic feet. Heavy gauge stainless steel bottom shelf that is full depth of unit and welded to outer wrapper. 43⁄4˝ (121mm) urn trough slopes to a 1˝ (25mm) drain and comes complete with full length removable louvered grate. 229⁄16˝ (573mm) front-to-back. 341⁄2˝ to 351⁄2˝ (876 to 902mm) adjustable height.

Note: Casters, add prefix “P” and add $259 to list price. Example: PUS3CB. Center shelf, add 20% to list price of unit and add suffix “-CS” to model number. Example: US3OB-CS

Open Front

If urn trough is desired on rear side, add suffix “R” to end of model number. Example: US3OBR.

Sliding Doors

For optional accessories and replacements, see pages 202-208.

length in. mm

cubic feet

48˝ 1219 631⁄2˝ 1613 79˝ 2007

39.8 51.5 62.6

weight lbs. kg model # 225 102.1 US3OB 265 120.2 US4OB 305 138.3 US5OB

list 3878 4519 5592

weight lbs. kg model # 233 105.7 US3CB 274 124.3 US4CB 315 142.9 US5CB

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

list 4892 5753 6889

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

201


HOT FOOD TABLES Catalog Section 30

Tray Stands see spec sheet

• • • •

EG30.11

optional silverware unit shown

FEATURES:

Stationary. 16 gauge stainless steel top. Heavy gauge cabinet. Stainless steel tubular legs with adjustable non-marking bullet feet. • 18˝ (457mm) working height, 443⁄4˝ (1137mm) with silverware unit. • 221⁄2˝ (572mm) front-to-back. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Optional Silverware Unit for Tray Stand Polished die-formed heavy gauge stainless steel wrapper; 1˝ (25mm) square stainless steel tubing; and eight plastic silverware holders. length in. mm 33˝

cubic feet

838

135

weight lbs. kg 61.2

12.3

model # TU-1

length in. mm

list 1756

33˝

Overshelves

838

cubic feet

weight lbs. kg

35

FEATURES:

15.9

10.3

model # SW-1

list 702

• 10˝ (254mm) wide.

see spec sheet EG30.20B

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Single Shelf, Non-Adjustable Double Shelf, Non-Adjustable 16 gauge type 430 stainless steel shelf with stainless steel tubular legs. length weight in. mm lbs. kg

cu ft

33˝ 48˝ 631⁄2˝ 79˝ 941⁄2˝

1.2 1.6 2.1 2.6 3.1

838 1219 1613 2007 2400

18 20 24 35 45

8.2 9.0 10.9 15.9 20.4

model # OS-HT2 OS-HT3 OS-HT4 OS-HT5 OS-HT6

list 737 758 778 1057 1163

Two 16 gauge type 430 stainless steel shelves with stainless steel tubular legs. All-welded construction. weight lbs. kg

cu ft

36 40 48 70 90

1.8 2.3 3.2 3.9 4.7

16.3 18.1 21.8 31.8 40.8

model # DOS-HT2 DOS-HT3 DOS-HT4 DOS-HT5 DOS-HT6

list 1248 1375 1415 1823 1898

Optional Heat Lamp Brackets for Overshelves To mount full-length lamps to underside of overshelf. Spaced to fit heat lamps. Custom sizes and configurations available. Consult factory. for overshelf heat lamp number of length length brackets add in. mm in. mm (pairs) suffix 33˝ 838 18˝ 457 1 -HLB 48˝ 1219 36˝ 914 1 -HLB 631⁄2˝ 1613 48˝ 1219 1 -HLB 79˝ 2007 66˝ 1676 1 -HLB 941⁄2˝ 2400 36˝ 914 2 -HLB

Serving Shelves

Freight class is 70.0.

see spec sheet EG30.20A

(•) MTS (made to stock) / ( ) MTO (made to order)

Open Front

18˝ (457mm) wide.

202

list per pair 187 187 187 187 187

length in. mm

weight lbs. kg

33˝ 48˝ 631⁄2˝ 79˝ 941⁄2˝

20 25 35 40 55

838 1219 1613 2007 2400

9.0 11.3 15.9 18.1 24.9

cubic feet model # 1.2 SS-HT2 1.7 SS-HT3 2.3 SS-HT4 2.9 SS-HT5 3.5 SS-HT6

list 706 791 847 1083 1118

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

Acrylite® Front Panel model # SSP-HT2 SSP-HT3 • SSP-HT4 • SSP-HT5 • SSP-HT6

list 818 864 955 1237 1275


HOT FOOD TABLES Catalog Section 30

Buffet Shelves see spec sheet EG30.20A FEATURES:

• Front sneeze guard. • Heavy gauge stainless steel top located 20˝ (508mm) above surface. • 1⁄4˝ (6mm) clear Acrylite® front and end panels. • 137⁄8˝ (352mm)-wide top (excluding clear panels). Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

sneeze guard on one side length in. mm

weight lbs. kg

cu ft

48˝ 631⁄2˝ 79˝ 941⁄2˝

38 58 83 104

2.3 3.2 4.0 4.7

1219 1613 2007 2400

17.2 26.3 37.6 47.2

model # BS1-HT3 BS1-HT4 BS1-HT5 BS1-HT6

sneeze guard on both sides

list 1003 1119 1222 1615

weight cu lbs. kg ft 48 68 93 114

Buffet Shelves with Infrared Bullet Lamps sneeze guard on one side length in. mm

weight lbs. kg

cu ft

48˝ 631⁄2˝ 79˝ 941⁄2˝

48 76 114 130

2.8 3.6 4.3 5.1

1219 1613 2007 2400

21.8 34.5 51.7 59.0

model # BS1-HT3-IL BS1-HT4-IL BS1-HT5-IL BS1-HT6-IL

see spec sheet EG30.20A

FEATURES:

cu ft

33˝ 48˝ 631⁄2˝ 79˝ 941⁄2˝

27 37 47 55 69

1.4 2.0 2.6 3.3 3..7

838 1219 1613 2007 2400

12.2 16.8 21.3 24.9 31.3

model # DSSP-HT2 DSSP-HT3 • DSSP-HT4 • DSSP-HT5 • DSSP-HT6

model # BS2-HT3 BS2-HT4 • BS2-HT5 BS2-HT6

list 1047 1162 1276 1666

sneeze guard on both sides

list 1458 1943 2261 2304

weight cu lbs. kg ft 62 78 116 132

28.1 35.4 52.6 59.9

3.2 4.0 4.7 5.5

model # BS2-HT3-IL BS2-HT4-IL BS2-HT5-IL BS2-HT6-IL

list 1498 1993 2315 2353

Stainless steel. Front sloped back for increased visibility. 1 ⁄4˝ (6mm) clear Acrylite® front and end panels. Supported by 1˝ (25mm) square stainless steel tubing in rear and 1⁄8˝ x 1˝ (3 x 25mm) stainless steel bar in front. • 10˝ (254mm)-wide top (excluding clear panels). Note:

weight lbs. kg

2.3 3.2 4.0 4.7

• • • •

Deluxe Serving Shelves

length in. mm

21.8 30.8 42.2 51.7

list 1053 1094 1208 1545 1580

Acrylite® end panels available. To order one end only, add “L” or “R” (left or right end, looking from customer’s side of unit) to model number and $218 to list price. To order both ends, add “LR” to model number and $437 to list price. Example: DSSPL-HT2.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Also available: REDHOTS® Heat Lamps

REDHOTS® Display Lights

see page 239 Or download our product announcement EG8182 off our website www.eaglegrp.com

see page 240 Or download our product announcement EG8171 off our website www.eaglegrp.com

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

203


HOT FOOD TABLES Catalog Section 30

Tray Shelves see spec sheet EG30.20A

FEATURES:

• 10˝ (254mm) wide. • Stainless steel. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

with Stationary Brackets

tray shelf shown with hinged drop brackets

length in. mm

weight lbs. kg

33˝ 48˝ 631⁄2˝ 79˝ 941⁄2˝

14 18 21 24 31

838 1219 1613 2007 2400

6.4 8.2 9.5 10.9 14.1

cubic feet model # 0.3 TS-HT2 0.5 TS-HT3 0.7 TS-HT4 0.8 TS-HT5 1.0 TS-HT6

Dish Shelves see spec sheet EG30.20A FEATURES:

• • • • •

list 579 708 940 1169 1234

with Drop Brackets model # TS-DB-HT2 TS-DB-HT3 TS-DB-HT4 TS-DB-HT5 TS-DB-HT6

list 634 763 998 1251 1276

Removable without the use of tools. Stainless steel. 8˝ (203mm) wide. 11⁄4˝ (32mm) thick. Mounts under preexisting cutting board. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

length weight in. mm lbs. kg 33˝ 48˝ 631⁄2˝ 79˝ 941⁄2˝

838 1219 1613 2007 2400

6 7 11 14 20

2.7 3.2 5.0 6.4 9.0

cubic feet model # 0.3 353985 0.4 353986 0.6 353987 0.7 353988 0.9 355196

list 748 795 901 1132 1185

Tray Slides see spec sheet EG30.20A

• 101⁄2˝ (267mm) wide. FEATURES: • Three tubular stainless steel rails. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Stationary Brackets tray slide shown with stationary brackets

204

length in. mm

weight lbs. kg

33˝ 48˝ 631⁄2˝ 79˝ 941⁄2˝

14 18 21 24 31

838 1219 1613 2007 2400

6.4 8.2 9.5 10.9 14.1

cubic feet model # 4.0 TSL-HT2 5.5 TSL-HT3 • 6.8 TSL-HT4 • 8.2 TSL-HT5 • 9.5 TSL-HT6

list 471 568 771 960 1015

Drop Brackets model # TSL-DB-HT2 TSL-DB-HT3 • TSL-DB-HT4 TSL-DB-HT5 TSL-DB-HT6

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

list 532 629 829 1051 1116


HOT FOOD TABLES Catalog Section 30

Cutting Boards Upgrade

Freight class is 55.0.

see spec sheet EG30.20A

(•) MTS (made to stock) / ( ) MTO (made to order)

Thermoplastic Cutting Board Replacement • 8˝ (203mm) wide x 1⁄2˝ (13mm) thick. length in. mm

weight lbs. kg

33˝ 48˝ 631⁄2˝ 79˝ 941⁄2˝

12 17 23 30 37

838 1219 1613 2007 2400

5.4 7.7 10.4 13.6 16.8

cubic feet

for model #

2.5 3.0 3.5 4.0 4.5

HT2 HT3 HT4 HT5 HT6

model # 353996 353997 353998 353999 354066

list 360 396 455 597 673

model # RLB-2 RLB-3 RLB-4 RLB-5 RLB-6

list 475 593 636 766 1015

Richlite® Heat-Resistant • 8˝ (203mm) wide x 1⁄2˝ (13mm) thick. • Resists up to 360˚F. • Stainless steel mounting brackets. length in. mm

weight lbs. kg

33˝ 48˝ 631⁄2˝ 79˝ 941⁄2˝

14 18 21 24 31

838 1219 1613 2007 2400

6.3 8.2 9.5 10.9 14.1

cubic feet

for model #

2.5 3.0 3.5 4.0 4.5

HT2 HT3 HT4 HT5 HT6

Hardwood… • 8˝ (203mm) wide x 11⁄4˝ (32mm) thick.

Stationary Brackets length in. mm

weight lbs. kg

33˝ 48˝ 631⁄2˝ 79˝ 941⁄2˝

14 18 21 24 31

838 1219 1613 2007 2400

6.4 8.2 9.5 10.9 14.1

cubic feet model # 2.5 WB-HT2 3.0 WB-HT3 3.5 WB-HT4 • 4.0 WB-HT5 4.5 WB-HT6

list 360 396 455 597 748

Drop Brackets model # WB-DB-HT2 WB-DB-HT3 WB-DB-HT4 WB-DB-HT5 WB-DB-HT6

list 626 661 721 995 1321

Stainless Steel Bottle Holders

FEATURES: • For plastic condiment bottles. • Type 300 series stainless steel construction. see spec sheet EG30.20B • 27⁄16˝ (63mm) diameter holes punched for bottle dispensers. • Fits traditional one third- or one sixth-size food tent U.S. Pa,969 pan applications. 03

#7,0

Freight class is 85.0. (•) MTS (made to stock) / ( ) MTO (made to order)

#SBH-1/6

#SBH-1/3

(bottles not included)

description 7˝ x 61⁄2˝ x 51⁄2˝ (178 x 165 x 140mm), holds four bottles 7˝ x 123⁄4˝ x 51⁄2˝ (178 x 324 x 140mm), holds eight bottles

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

model # SBH-1/6 SBH-1/3

list 84 95

205


HOT FOOD TABLES Catalog Section 30

Rolltop Cover

Freight class is 70.0.

see spec sheet EG30.20B

description fits over heat well

model # 501585 •

(•) MTS (made to stock) / ( ) MTO (made to order)

list 408

Spillage Pans see spec sheet EG30.20B FEATURES:

• Required for wet applications. • Deep-drawn, fully coved. • 61⁄2˝ (165mm) deep. Freight class is 100.0.

6-PACK weight EACH each description lbs. kg model # list model # list stainless steel 7 3.2 302027 198 502808 • 1188 aluminum 3 1.4 304141 106 502809 • 636

Chafing Dish Frames see spec sheet EG30.20B FEATURES:

(•) MTS (made to stock) / ( ) MTO (made to order)

• • • •

Mild steel, zinc-plated. Two 4˝ (102mm) recesses allow for holding fuel cans. Fuel not included. 101⁄4˝ (260mm) overall height. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

overall dimensions width x length in. mm

description

wire chafing frame with spillage pan

frame frame with aluminum spillage pan

Bullet Feet

plastic

206

340 x 680 340 x 680

list 56 96

Can be shipped UPS

see spec sheet EG30.20B

description

133⁄8˝ x 263⁄4˝ 133⁄8˝ x 263⁄4˝

weight lbs. kg model # 1.5 0.7 CDF 4.5 2.0 CDF-1

model # 300293

(•) MTS (made to stock) / ( ) MTO (made to order)

list 2

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


HOT FOOD TABLES Catalog Section 30

Food Pans and Round Insets see spec sheet EG30.20B

FEATURES:

• All pans, lids, and insets are stainless steel. • Minimum purchase $165 net, any assortment. Freight class is 70.0.

Food Pans/Adapter Bars description full size pan, 20 ⁄4˝ x 12 ⁄4˝ x 2 ⁄2˝ (527 x 324 x 64mm) full size pan, 203⁄4˝ x 123⁄4˝ x 4˝ (527 x 324 x 102mm) half size pan, 103⁄8˝ x 123⁄4˝ x 21⁄2˝ (264 x 324 x 64mm) half size pan, 103⁄8˝ x 123⁄4˝ x 4˝ (264 x 324 x 102mm) one-third size pan, 67⁄8˝ x 123⁄4˝ x 21⁄2˝ (175 x 324 x 64mm) one-third size pan, 67⁄8˝ x 123⁄4˝ x 4˝ (175 x 324 x 102mm) one-fourth size pan, 63⁄8˝ x 103⁄8˝ x 21⁄2˝ (162 x 264 x 64mm) one-fourth size pan, 63⁄8˝ x 103⁄8˝ x 4˝ (162 x 264 x 102mm) 10˝ (254mm) adapter bar 12˝ (305mm) adapter bar 3

3

1

model # 301669 303775 304050 304051 304052 304053 304054 304055 301792 301791

list 73 88 43 54 36 46 33 40 27 28

model # 304056 304057 304058 304059

list 72 39 28 36

model # 304020 304021 304060

list 69 103 109

model # 304018 304019 304049

list 18 39 39

model # 305300 303974

list 54 22

(•) MTS (made to stock) / ( ) MTO (made to order)

Lids for Food Pans description full size, with handle half size, with handle one-third size, with handle one-fourth size, with handle

food pans

Round Insets description 4-quart inset for 61⁄2˝ (165mm) opening 7-quart inset for 81⁄2˝ (216mm) opening 11-quart inset for 101⁄2˝ (267mm) opening

Lids for Round Insets description For 4-quart inset For 7-quart inset For 11-quart inset

round inset with optional lid

Other description brass drain stopper

Adapter Tops for Round Insets Stainless steel. 2-Pot Adapter Tops description two 81⁄2˝ (216mm) diameter openings, each for 7 qts. (6.6 liters) one 81⁄2˝ (216mm) diameter opening for 7 qts (6.6 liters), and one 101⁄2˝ (267mm) diameter opening for 11 qts. (10.4 liters) one 61⁄2˝ (165mm) diameter opening for 4 qts (3.8 liters), and one 101⁄2˝ (267mm) diameter opening for 11 qts. (10.4 liters) one 61⁄2˝ (165mm) diameter opening for 4 qts (3.8 liters), and one 81⁄2˝ (216mm) diameter opening for 7 qts (6.6 liters)

model # 501600 • 501912 •

list 113 113

501913

113

3-Pot Adapter Top 501915

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

113

description three 61⁄2˝ (165mm) diameter openings, each for 4 qts (3.8 liters)

model # 501914 •

list 113

207


HOT FOOD TABLES Catalog Section 30

FLEX-MASTER® Overshelf System see spec sheet

EG30.18 FEATURES:

• Adjustable height in 1˝ (25mm) increments for flexible and accurate shelf placement. • 10˝ (254mm) and 15˝ (381mm) shelf widths can be intermixed on same posts. Note: All shipping weights and cubic feet are approximate. Heat lamp brackets available—$178 per pair. Heat lamps are furnished and installed by others. Specify location of brackets.

Freight class is 70.0.

Create your own customized design using standard components.

(•) MTS (made to stock) / ( ) MTO (made to order)

Pot Hooks Stainless steel. weight cubic lbs. kg feet model # 0.2 0.1 0.1 300696

hot food table with optional FLEX-MASTER® Overshelf System

10˝ (254mm) wide Overshelves

Stainless Steel Posts

• 16 gauge type 304 stainless steel. • Priced per shelf.

• • • • •

length number weight in. mm of wells lbs. kg 33˝ 48˝ 631⁄2˝ 79˝ 941⁄2˝

838 1219 1613 2007 2400

2 3 4 5 6

10 14 24 29 35

4.5 6.4 10.9 13.2 15.9

cubic feet model # 1.2 421002 • 1.6 421003 • 2.1 421004 • 2.6 421005 • 3.1 421006

list each 405 425 449 569 663

cubic feet model # 1.6 421502 2.2 421503 • 2.7 421504 • 3.3 421505 • 3.7 421506

list each 578 604 629 817 938

list each 24

With plates. Calibrated in 1˝ (25mm) increments. Sold in pairs. 2-well to 5-well units require two pairs of posts. 6-well units require three pairs. Freight class is 50.0. height in. mm

weight lbs. kg

18˝ 30˝ 48˝

1.7 2.4 5.6

457 762 1219

0.8 1.1 2.5

cubic feet model # 0.1 418012 • 0.2 430012 • 0.2 448012 •

15˝ (381mm) wide Overshelves • 16 gauge type 304 stainless steel. • Priced per shelf. length number weight in. mm of wells lbs. kg 33˝ 48˝ 631⁄2˝ 79˝ 941⁄2˝

838 1219 1613 2007 2400

2 3 4 5 6

14 19 30 37 44

6.4 8.6 13.6 16.3 20.0

Pot & Ladle Racks - Chrome plated. length in. mm 33˝ 48˝ 631⁄2˝ 79˝ 941⁄2˝

838 1219 1613 2007 2400

weight cubic lbs. kg feet model # 1.9 0.9 0.2 PRT2-C 2.1 1.0 0.2 PRT3-C 2.5 1.1 0.3 PRT4-C 4.1 1.9 0.3 PRT5-C 4.9 2.2 0.4 PRT6-C *

list each 69 83 105 129 169

FLEX-MASTER® with optional pot & ladle rack and stainless steel posts

*PRT6-C is provided in two sections.

208

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

list per pair 154 196 268


HOT FOOD TABLES Catalog Section 30

Deluxe Service Mates - pages 209-211 UNITS INCLUDE: • Tuffak® clear sneeze guard (except cashiers stand). • Polished stainless steel top with black vinyl-clad 22 gauge steel body. • Portable models feature 4˝ (102mm) swivel casters (two with brake) and black vinyl-clad 18 gauge steel base. • Tabletop models feature adjustable feet. • All units are 229⁄16˝ (573mm) front-to-back—361⁄4˝ (921mm) including the sneeze guard. Note:

Stainless steel liners in place of galvanized, add $80 per compartment to list price of unit and add “S” after “HT” in model number. Example: BPDHTS3-120. Stainless steel body upgrade, add 20% to list price of unit and add suffix “-S” to end of model number. Example: BPDHT2-120-S.

Buffet Hot Food Tables see spec sheet EG30.16A

FEATURES:

• Individual controls for each heat well. • Units are now available with recessed control panel. Note:

1000-watt heaters available for 240V models. To order, add suffix “-1” to model number and $66 per well to list price. Example: BPDHT2-240-1. 208-volt models available. To specify, add suffix “-208”. Example: BPDHT2-208.

Freight class is 125.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Receptacle Configurations Required

15A 125V

model # BPDHT2-120 BPDHT3-120 CDHT2-120 CDHT3-120

portable buffet hot food table

15A 250V

20A 250V

30A 125V

20A 3Ø 250V

model # model # model # BPDHT2-240 BPDHT4-240 BPDHT4-120 all BPDHT3-240 CDHT4-240 CDHT4-120 three-phase models CDHT2-240 CDHT3-240

furnished with furnished with furnished with furnished with furnished with NEMA 5-15 NEMA 6-15 NEMA 6-20 NEMA 5-30 NEMA 15-20 plug plug plug plug plug

tabletop buffet hot food table

New York M.E.A. No. 376-84

Portable Models # of top length weight cu SINGLE-PHASE openings in. mm lbs. kg ft volts watts amps model # 2 33˝ 838 212 96.2 42.4 120V 1000W 8.3A BPDHT2-120 2 33˝ 838 212 96.2 42.4 240V 1500W 6.25A BPDHT2-240 3 48˝ 1219 264 119.8 59.6 120V 1500W 12.5A BPDHT3-120 • 3 48˝ 1219 264 119.8 59.6 240V 2250W 9.4A BPDHT3-240 4 631⁄2˝ 1613 312 141.5 75.6 120V 2000W 16.7A BPDHT4-120 • 4 631⁄2˝ 1613 312 141.5 75.6 240V 3000W 12.5A BPDHT4-240 •

list 4182 4182 4707 4707 5312 5312

THREE-PHASE amps model # n/a 6.9A n/a 6.9A n/a 10.5A

n/a

list n/a

BPDHT2-240-3 4804 n/a

n/a

BPDHT3-240-3 5376 n/a

n/a

BPDHT4-240-3 6033

Tabletop Models # of top length weight cu SINGLE-PHASE openings in. mm lbs. kg ft volts watts amps model # 2 33˝ 838 149 67.6 33.8 120V 1000W 8.3A CDHT2-120 2 33˝ 838 149 67.6 33.8 240V 1500W 6.25A CDHT2-240 3 48˝ 1219 189 85.7 44.2 120V 1500W 12.5A CDHT3-120 • 3 48˝ 1219 189 85.7 44.2 240V 2250W 9.4A CDHT3-240 4 631⁄2˝ 1613 234 106.1 57.1 120V 2000W 16.7A CDHT4-120 • 4 631⁄2˝ 1613 234 106.1 57.1 240V 3000W 12.5A CDHT4-240 •

list 3049 3049 3566 3566 4248 4248

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

THREE-PHASE amps model # list n/a n/a n/a 6.9A CDHT2-240-3 3574 n/a 6.9A n/a 10.5A

n/a

CDHT3-240-3 n/a

CDHT4-240-3

n/a

4136 n/a

4877

209


HOT FOOD TABLES Catalog Section 30 • Polished 22 gauge stainless steel top. • Black vinyl-clad 22 gauge steel body. • 6˝ (152mm)-deep insulated ice pan is 20 gauge type 304 stainless steel.

Buffet Cold Pan Units see spec sheet EG30.16A FEATURES:

Freight class is 125.0. (•) MTS (made to stock) / ( ) MTO (made to order) New York M.E.A. No. 376-84

portable buffet cold pan unit

table top buffet cold pan unit

Portable Models

Tabletop Models

length in. mm

weight lbs. kg

33˝ 48˝ 631⁄2˝

167 203 240

838 1219 1613

75.8 92.1 108.9

cu ft

model # list BPCP-2 3492 BPCP-3 • 3999 BPCP-4 • 4240

42.4 59.6 75.6

length in. mm

weight lbs. kg

33˝ 48˝ 631⁄2˝

137 157 188

838 1219 1613

• • • • FEATURES: •

Portable Buffet Solid Top Units see spec sheet EG30.16B

62.1 71.2 85.3

cu ft 33.8 44.2 57.1

model # CCP-2 CCP-3 CCP-4

list 3205 3632 3747

Polished 16 gauge stainless steel top. Black vinyl-clad 22 gauge steel body. Black vinyl-clad 18 gauge steel base. 4˝ (102mm) swivel casters (two with brakes). Tuffak® sneeze guard. Freight class is 125.0.

portable solid top buffet unit

length in. mm

weight lbs. kg

33˝ 48˝ 631⁄2˝

157 193 230

838 1219 1613

71.2 87.5 104.3

(•) MTS (made to stock) / ( ) MTO (made to order) New York M.E.A. No. 376-84

cu ft 42.4 59.6 75.6

model # BPST-2 BPST-3 BPST-4

Beef Cart see spec sheet EG30.16B

list 3040 3337 3807

• • • • • • • FEATURES: •

Polished 22 gauge stainless steel top. Black vinyl-clad 18 gauge steel body. Black vinyl-clad 18 gauge steel base. 12˝ x 20˝ (305 x 508mm) heat well. 250W heat lamp, Poly top carving board. 4˝ (102mm) swivel casters (two with brakes). Adjustable Tuffak® sneeze guard. Freight class is 125.0. (•) MTS (made to stock) / ( ) MTO (made to order)

New York M.E.A. No. 376-84

210

length in. mm

weight cubic lbs. kg feet

33˝

167

838

75.8

42.4

electrical data 1450W, 120V, 12.1A

model # BC-1

list 5558

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


HOT FOOD TABLES Catalog Section 30 • • • • •

Cashiers Stand see spec sheet EG30.16B

FEATURES:

Polished 18 gauge stainless steel top. Black vinyl-clad 22 gauge steel body. 22 gauge stainless steel bottom panel. 4˝ (102mm) swivel casters (two with brakes). Enclosed storage area under stainless steel faced cashier drawer.

Note:

length in. mm

weight lbs. kg

24˝

110

610

49.9

cu ft 19.3

Tray shelves for cashier stand available. Stainless steel. Set of two. Model #: PTS-1. List: $1289

Freight class is 100.0. model # CS-1

list 1772

(•) MTS (made to stock) / ( ) MTO (made to order)

Accessories for Deluxe Service Mates

Freight class is 85.0.

see spec sheet EG30.16B

(•) MTS (made to stock) / ( ) MTO (made to order) New York M.E.A. No. 376-84

description Service Mate Select wood-trimmed Tuffak® sneeze guards fluorescent lights with plastic shields (factory installation required) infrared bullet lamps (has separate cord. Not wired to base unit) vinyl skirts for portable buffets (each price shown is for one piece)

service mate shown with optional heat lamps, food pans with insets, and wood-trimmed sneeze guard

stainless steel skirts for portable buffets (each price shown is for one piece)

stainless steel 8˝ (203mm) wide tray shelves, set of two

stainless steel undershelf for portable buffets

REDHOTS® Heat Lamps (OPTION) see product announcement

model # DSG-2 DSG-3 DSG-4 FL-2 FL-3 FL-4 IL-2 IL-3 IL-4 VS-2 VS-3 VS-4 SS-2 SS-3 SS-4 PTS-2 PTS-3 PTS-4 • US-2 US-3 US-4

list each 3712 3861 4063 1467 1555 1593 1440 1657 1851 195 237 258 232 282 307 1429 1504 1632 248 285 328

REDHOTS® Display Lights (OPTION) see product announcement

EG35.23

For more information on this product see page 239.

EG8171

For more information on this product see page 240.

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

211


NOTES ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________

212

____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


Director’s Choice® Modular Cafeteria Line Director’s Choice® Units

Accessories/Components Buffet Shelves ..................................229 Custom Accessories..................230-231 Rear Doors and Panels ....................229 Serving Shelves................................229 Sneeze Guards..........................228, 230 Stainless Steel Front Panels ............227 Tray Slides ........................................227 Undershelves ....................................229 Various Working Heights ..................227 Work Shelves....................................228

Beverage Units..................................221 Carving Station Unit ........................219 Cashier Units ....................................220 Cold Food Units ........................215-216 Corner Transition Units ....................222 Dish/Cup Dispenser Units ................226 Drop-In Adjustable Dispensers ........225 Frost Top Units ................................221 Heated Surface Units........................217 Hot Food Service Counters ..............219

Hot Food Units..................................214 Ice Cream Units ................................218 Rack/Tray Dispenser Units................224 Refrigerated Milk Unit ......................218 Solid Top Refrigerated Base Units ....217 Solid Top Utility Carts ......................217 Stainless Steel Bottle Holders ..........225 Tray & Silverware Unit......................223 Tray Platform Unit ............................223 Tray/Silverware/Napkin Dispenser Unit ..............................222

CUSTOM

Director’s Choice® VIP System High-profile merchandiser. Endless configurations of color and lighting options—limited only by your imagination. Signage system visually announces menu choices. Prewired system reduces field cost and installation. Reduces customers’ wait time by spreading customers across a larger area. Priced per application.

Pylons

VIP system attached to Director’s Choice® 4-well hot food unit

• Constructed of 11⁄2˝ square tubing, mild steel or stainless steel, with mounting plates welded to tubing. • Attached to Director’s Choice® units via docking device for easy installation and removal. • Fully configurable to match the “look” that the designer requires. • Can be powder-coated in various colors, covered in millwork with your choice of laminates…THE IDEAS ARE ENDLESS.

Signage • Constructed of powder-coated mild steel. • Configurable to nearly any shape or size. • Signs can be preprinted adhesive, laminated millwork, neon, backlight, and many other styles to meet the needs of your customers. • Signs are wired to UL standards and have a cord and plug wired through the pylon for concealment.

Lighting • Low voltage lighting or standard 120-volt lights are available. • Drop lighting meets NSF standards for mounting over a hot or cold pan unit. • Hundreds of lighting styles to choose from to meet the needs of your customers. • Lights are prewired at the factory and require a 120-volt outlet, or you can have it wired to Director’s Choice® unit.

213


DIRECTOR’S CHOICE® MODULAR CAFETERIA SERVING UNITS Catalog Section 33

Hot Food Units

CUSTOM

see spec sheet

hot food unit – customer side shown with optional laminate end panels

Refer to page 227 for optional overall heights and optional heights of tray slides available for units on this page.

Features:

EG33.02

• Type 304 stainless steel construction. • 16 gauge type 304 stainless steel top is 30˝ (762mm) front-to-back and 2˝ (51mm) tall. • 34˝ (864mm) standard working height complies with ADA guidelines for accessibility standards. • Welded 11⁄2˝ (38mm) square tubular type 304 stainless steel base construction. • Open base on three sides – 73⁄16˝ (183mm) tall type 304 stainless steel apron on operator’s side. • 5˝ (127mm) poly tread swivel casters (two with brake). • Holly berry red front laminate panel (Wilsonart® D307-60) on heavy gauge galvanized subpanel. • Insulated 12˝ x 20˝ (305 x 508mm) sealed heat wells with individual thermostatic controls. • Wells offered with or without drains – specify when ordering. • Drains connect to common manifold, drain to left end. • Accepts 12˝ x 20˝ (305 x 508mm) food pans. • Wired to cord and plug. • Wet or dry operation. • 1200W per well at 120V. • 240V units listed in chart below can be run at 208V operation. This will reduce available amperage and wattage by 25%.

Optional Individual Drain for Hot Food Units • Individual drain for each well with manifold to single valve. • 3⁄4˝ (19mm) ball valve provided (NPTF). # of wells 2 3 4 5 6

add suffix # -D -D -D -D -D

add to list 463 695 926 1158 1389

Receptacle Configurations Required

30 AMP 125V

50 AMP 125V

15 AMP 250V

20 AMP 250V

30 AMP 250V

50 AMP 125V

20A 3Ø 250V

model # model # model # model # model # model # DCS2-HFU-A DCS3-HFU-A DCS2-HFU-B DCS3-HFU-B DCS4-HFU-B DCS5-HFU-B DCS2-HFU-C DCS3-HFU-C DCS6-HFU-B DCS4-HFU-C DCS5-HFU-C DCS6-HFU-C

all three-phase 240V models

furnished with furnished with furnished with furnished with furnished with furnished with NEMA 5-30 plug NEMA 5-50 plug NEMA 6-15 plug NEMA 6-20 plug NEMA 6-30 plug NEMA 6-50 plug

furnished with NEMA 15-20 plug

# of top length weight cu SINGLE-PHASE openings in. mm lbs. kg ft volts watts amps model # list 2 36˝ 914 165 74.8 22 120V 2400W 20.0A DCS2-HFU-A 6161 2 36˝ 914 165 74.8 22 240V 2400W 10.0A DCS2-HFU-B 6161 2 36˝ 914 165 74.8 22 240V 3200W 13.3A DCS2-HFU-C 6161 3 50˝ 1270 200 90.7 30 120V 3600W 30.0A DCS3-HFU-A 7428 3 50˝ 1270 200 90.7 30 240V 3600W 15.0A DCS3-HFU-B 7428 3 50˝ 1270 200 90.7 30 240V 4800W 20.0A DCS3-HFU-C 7428 4 64˝ 1626 250 113.4 38 240V 4800W 20.0A DCS4-HFU-B 8954 4 64˝ 1626 250 113.4 38 240V 6400W 26.7A DCS4-HFU-C 8954 5 78˝ 1981 305 138.3 46 240V 6000W 25.0A DCS5-HFU-B 10490 5 78˝ 1981 305 138.3 46 240V 8000W 33.4A DCS5-HFU-C 10490 6 96˝ 2438 355 161.0 57 240V 7200W 30.0A DCS6-HFU-B 12361 6 96˝ 2438 355 161.0 57 240V 9600W 40.0A DCS6-HFU-C 12361

214

Note:

THREE-PHASE amps model #

Accommodate accessories such as tray slides, work shelves, and removable undershelves (see pages 227-229). Laminate end panels available. To order, add suffix “-LEP” to model number and $371 to list price. Example: DCS2-HFU-A-LEP.

list

n/a 5.8A DCS2-HFU-B-3 6428 7.7A DCS2-HFU-C-3 6428 n/a 8.7A DCS3-HFU-B-3 7696 11.6A DCS3-HFU-C-3 7696 13.2A DCS4-HFU-B-3 9222 17.7A DCS4-HFU-C-3 9222 17.3A DCS5-HFU-B-3 10758 23.1A DCS5-HFU-C-3 10758 17.3A DCS6-HFU-B-3 12628 23.1A DCS6-HFU-C-3 12628

Stainless steel front panels available. To order, add suffix “-S” to model number. See chart on page 227 for list price. Example: DCS2-HFU-A-S. Stainless steel end panels available. To order, add suffix “-SEP” to model number and $434 to list price. Example: DCS2-HFU-A-SEP. Stainless steel bottle holders available— see page 225.

Freight class is 100.0. (•) MTS (made to stock) / ( ) MTO (made to order)

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


DIRECTOR’S CHOICE® MODULAR CAFETERIA SERVING UNITS Catalog Section 33

Cold Food Units with Refrigerated Mechanical Cold Pan

CUSTOM

Features: • Type 304 stainless steel construction. • 16 gauge type 304 stainless steel top is 30˝ (762mm) front-to-back and 2˝ (51mm) tall. • 34˝ (864mm) standard working height complies with ADA guidelines for accessibility standards. • Welded 11⁄2˝ (38mm) square tubular type 304 stainless steel base construction. • Open base on three sides – 73⁄16˝ (183mm) tall type 304 stainless steel apron on operator’s side. • 5˝ (127mm) poly tread swivel casters (two with brake). • Holly Berry red front laminate panel (Wilsonart® D307-60) on heavy gauge galvanized subpanel. • Available only in 120-volt 60Hz, wired to 6´(1829mm) cord and plug. • 3⁄4˝ (19mm) diameter drain and valve. • Accepts 12˝ x 20˝ (305 x 508mm) food pans, with the use of adapter bars provided.

see spec sheet EG33.01A

Receptacle Configurations Required

cold food unit shown with optional double sneeze guard, optional tray slide and optional laminate end panels. Note:

15 AMP 125V furnished with NEMA 5-15 plug

Optional sneeze guards are factory-installed.

Refer to page 227 for optional overall heights and optional heights of tray slides available for units on this page.

Note:

Laminate end panels available. To order, add suffix “-LEP” to model number and $371 to list price. Example: DCS2-CFURN-LEP.

Featuring Refrigerated Mechanical Cold Pan with Recessed Top (NSF-7) • 3˝ (76mm) recessed top. 9˝ (229mm) deep. Removable front-to-back and end-to-end adapter bars provided. # of pans 2 3 4 5 6 Note:

length in. mm

weight lbs. kg

cu ft

electrical data

36˝ 50˝ 64˝ 78˝ 96˝

275 325 385 435 520

22 30 38 46 57

1/4HP, 120V, 6.0A 1/4HP, 120V, 6.0A 1/3HP, 120V, 7.8A 1/2HP, 120V, 10.7A 1/2HP, 120V, 10.7A

914 1270 1626 1981 2438

124.7 147.4 174.6 197.3 235.9

model # DCS2-CFURN DCS3-CFURN DCS4-CFURN DCS5-CFURN DCS6-CFURN

Stainless steel front panels available. To order, add suffix “-S” to model number. See chart on page 227 for list price. Example: DCS2-CFURN-S.

list 8908 9793 10738 12046 13362

Stainless steel end panels available. To order, add suffix “-SEP” to model number and $434 to list price. Example: DCS2-CFURN-SEP.

For 5-year compressor warranty, add List Price of $215. Must be ordered when ordering Cold Food Unit(s).

Featuring Refrigerated Mechanical Cold Pans (Standard Depth) • 45⁄8˝ (117mm) deep x 197⁄8˝ (505mm) wide refrigerated cold pan. Removable front-to-back adapter bars provided. Note:

2 3 4 5 6 Note:

length in. mm

weight lbs. kg

cu ft

electrical data

36˝ 50˝ 64˝ 78˝ 96˝

210 260 320 370 460

22 30 38 46 57

1/5HP, 120V, 3.9A 1/5HP, 120V, 3.9A 1/4HP, 120V, 6.8A 1/3HP, 120V, 9.8A 1/3HP, 120V, 9.8A

914 1270 1626 1981 2438

95.3 117.9 145.2 168.8 208.7

model # DCS2-CFUR DCS3-CFUR DCS4-CFUR DCS5-CFUR DCS6-CFUR

Stainless steel bottle holders available— see page 225.

Freight class is 100.0.

Not compliant with NSF-7. Check local health codes for applications required.

# of pans

All units are predrilled to accommodate accessories such as tray slides, work shelves, and removable undershelves (see pages 227-229).

(•) MTS (made to stock) / ( ) MTO (made to order)

list 7662 8505 9666 10705 12011

For 5-year compressor warranty, add List Price of $239. Must be ordered when ordering Cold Food Unit(s).

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

215


DIRECTOR’S CHOICE® MODULAR CAFETERIA SERVING UNITS Catalog Section 33

Cold Food Units with Refrigerated Mechanical Cold Pan (Cont.) see spec sheet EG33.01A

cold food unit shown with optional double sneeze guard, optional tray slide and optional laminate end panels. Note:

Optional sneeze guards are factory-installed.

Optional 93⁄4˝ (248mm) full depth cold pans for “…-CFUR” Units only Note:

Not compliant with NSF-7. Check local health codes for applications required.

# of pans 2 3 4 5 6

FULL DEPTH COLD PAN add suffix # * add to list -F 260 -F 420 -F 559 -F 635 -F 679

FULL DEPTH COLD PAN WITH SIDE COILS add suffix # * add to list -FS 477 -FS 562 -FS 910 -FS 1010 -FS 1197

Cold Food Units with Iced Cold Pan (Standard Depth) # of pans 2 3 4 5 6

length in. mm

weight lbs. kg

cu ft

36˝ 50˝ 64˝ 78˝ 96˝

130 160 190 235 270

22 30 38 46 57

914 1270 1626 1981 2438

59.0 72.6 86.2 106.6 122.5

model # DCS2-CFUI DCS3-CFUI DCS4-CFUI DCS5-CFUI DCS6-CFUI

Optional 93⁄4˝ (248mm) Full-Depth Cold Pans for above Units with Iced Cold Pan # of wells 2 3 4 5 6

add suffix # -F -F -F -F -F

add to list 201 221 303 346 392

EG33.01B list 5038 5682 6584 7446 8534

• Type 304 stainless steel construction. • 16 gauge type 304 stainless steel top is 30˝ (762mm) front-to-back and 2˝ (51mm) tall. • 34˝ (864mm) standard working height complies with ADA guidelines for accessibility standards. • Welded 11⁄2˝ (38mm) square tubular type 304 stainless steel base construction. • Open base on three sides – 73⁄16˝ (183mm) tall type 304 stainless steel apron on operator’s side. • 5˝ (127mm) poly tread swivel casters (two with brake). • Holly berry red front laminate panel (Wilsonart® D307-60) on heavy gauge galvanized subpanel. • Available only in 120-volt 60Hz, wired to 6´(1829mm) cord and plug. • 3⁄4˝ (19mm) diameter drain and valve. • Accepts 12˝ x 20˝ (305 x 508mm) food pans, with the use of adapter bars provided. Note:

* Examples: DCS3-CFUR-F is a unit with optional full depth cold pan. DCS3-CFUR-FS is a unit with optional full depth cold pan with side coils.

• 45⁄8˝ (117mm) deep x 197⁄8˝ (505mm) wide iced cold pan.

Features:

All units are predrilled to accommodate accessories such as tray slides, work shelves, and removable undershelves (see pages 227-229). Laminate end panels available. To order, add suffix “-LEP” to model number and $371 to list price. Example: DCS2-CFUI-LEP. Stainless steel front panels available. To order, add suffix “-S” to model number. See chart on page 227 for list price. Example: DCS2-CFUI-S. Stainless steel end panels available. To order, add suffix “-SEP” to model number and $434 to list price. Example: DCS2-CFUI-SEP. Stainless steel bottle holders available— see page 225.

Freight class is 100.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Refer to page 227 for optional overall heights and optional heights of tray slides available for units on this page.

* Example: DCS3-CFUI-F is a unit with optional full depth cold pan.

216

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


DIRECTOR’S CHOICE® MODULAR CAFETERIA SERVING UNITS Catalog Section 33

Solid Top Utility Carts

CUSTOM

see spec sheet

Features:

EG33.04

• Reinforced solid top constructed of 16 gauge type 304 stainless steel, die-formed, fully welded, polished, and reinforced with full length hat channel. length in. mm 36˝ 50˝ 64˝ 78˝ 96˝

solid top utility cart shown with optional double-tier sneeze guard, optional tray slide and optional side laminate panels

914 1270 1626 1981 2438

weight cubic lbs. kg feet model # 115 52.2 22 DCS2-STU 155 70.3 30 DCS3-STU 180 81.6 38 DCS4-STU 205 93.0 46 DCS5-STU 245 111.1 57 DCS6-STU

Solid Top Refrigerated Base Units see spec sheet

list 3233 3653 4132 4670 5493

CUSTOM

EG33.15

solid top refrigerated base unit with optional single-tier sneeze guard and laminate end panels (back panel removed to show compression housing)

Note:

length in. mm

weight lbs. kg

single door double door

64˝ 78˝

180 205

Note:

1626 1981

electrical data (single phase)

81.6 120V, 6.8A, 1/4HP 93.0 120V, 6.8A, 1/4HP

Stainless steel front panels available for all units. To order, add suffix “-S” to model number. See chart on page 227 for list price. Example: DCS2-STU-S.

model # DCS4-STURB DCS5-STURB

list 16926 21638

For 5-year compressor warranty, add List Price of $239. Must be ordered when ordering unit(s).

Heated Surface Units

CUSTOM

see spec sheet

EG33.13

(•) MTS (made to stock) / ( ) MTO (made to order)

Refer to page 227 for optional overall heights and optional heights of tray slides available for units on this page.

• Recessed aluminum top with blanket-type foil for uniform heat. Control thermostat with a range of 80˚ to 200˚F (27˚ to 93˚C) and On/Off switch.

50˝ 64˝ 78˝ 96˝

1270 1626 1981 2438

heated surface area width x length in. mm 191⁄2˝ x 42˝ 191⁄2˝ x 54˝ 191⁄2˝ x 66˝ 191⁄2˝ x 72˝

Stainless steel end panels available for all units. To order, add suffix “-SEP” to model number and $434 to list price. Example: DCS2-STU-SEP.

Freight class is 100.0.

heated surface unit shown with optional tray slide and optional laminate end panels

length in. mm

All units are predrilled to accommodate accessories such as tray slides, work shelves, and removable undershelves (see pages 227-229). Laminate end panels available for all units. To order, add suffix “-LEP” to model number and $371 to list price. Example: DCS2-STU-LEP.

• Ready-to-operate refrigeration system included. description

• Type 304 stainless steel construction. • 16 gauge type 304 stainless steel top is 30˝ (762mm) front-to-back and 2˝ (51mm) tall. • 34˝ (864mm) standard working height complies with ADA guidelines for accessibility standards. • Welded 11⁄2˝ (38mm) square tubular type 304 stainless steel base construction. • Open base on three sides – 73⁄16˝ (183mm) tall type 304 stainless steel apron on operator’s side. • 5˝ (127mm) poly tread swivel casters (two with brake). • Standard holly berry red front laminate panel (Wilsonart® D307-60) on heavy gauge galvanized subpanel.

Receptacle Configurations Required for Heated Surface Units

Receptacle Configurations Required for Solid Top Refrigerated Base Units

For 50"-64" Units For 78"-96" Units

electrical data

495 x 1067 120V, 7.4A, 885W 495 x 1372 120V, 9.3A, 1110W 495 x 1676 120V, 11.1A, 1330W 495 x 1829 120V, 12.0A, 1440W

model # DCS3-HS DCS4-HS DCS5-HS DCS6-HS

list 7328 8082 8516 9499

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

15 AMP 120V furnished with NEMA 5-15 plug

20 AMP 120V furnished with NEMA 5-20 plug

15 AMP 125V furnished with NEMA 5-15 plug

217


DIRECTOR’S CHOICE® MODULAR CAFETERIA SERVING UNITS Catalog Section 33

Refrigerated Milk Unit

CUSTOM

see spec sheet

EG33.05

• Type 304 stainless steel construction. • 16 gauge type 304 stainless steel top is 30˝ (762mm) front-to-back and 2˝ (51mm) tall. • 34˝ (864mm) standard working height complies with ADA guidelines for accessibility standards. • Welded 11⁄2˝ (38mm) square tubular type 304 stainless steel base construction. • Open base on three sides – 73⁄16˝ (183mm) tall type 304 stainless steel apron on operator’s side. • 5˝ (127mm) poly tread swivel casters (two with brake). • Standard holly berry red front laminate panel (Wilsonart® D307-60) on heavy gauge galvanized subpanel.

milk unit shown with optional tray slide and optional laminate end panels

• Built-in milk dispenser is self-leveling for easy reach. • Divider trays for 260 half-pint mini-peak cartons. • Stainless steel inner liner, foamed-in-place polyurethane insulation, and 1˝ (25mm) I.P.S. drain. • Dispenser opening is 163⁄4˝ x 223⁄4˝ (426 x 578mm). • Removable hinged folding lids feature stainless steel outer shell and high-impact plastic inner liner. • 120V operation wired to a 6´(1829mm) cord & plug. Note:

Locking lid device available. To order, add $413 to list price and add suffix -L to model number. Example: DCS3-EMU-L

length weight cubic in. mm lbs. kg feet 50˝ 1270 570 Note:

258.6

30

electrical data 1/4HP, 120V, 6.8A

model # DCS3-EMU

Features:

Note:

list 15438

Laminate end panels available for all units. To order, add suffix “-LEP” to model number and $371 to list price. Example: DCS3-EMU-LEP.

For 5-year compressor warranty, add List Price of $239. Must be ordered when ordering Refrigerated Milk Unit.

Ice Cream Units

Stainless steel front panels available for all units. To order, add suffix “-S” to model number. See chart on page 227 for list price. Example: DCS3-EMU-S.

CUSTOM

see spec sheet

All units are predrilled to accommodate accessories such as tray slides, work shelves, and removable undershelves (see pages 227-229).

EG33.11

Stainless steel end panels available for all units. To order, add suffix “-SEP” to model number and $434 to list price. Example: DCS3-EMU-SEP.

ice cream unit with optional tray slide and end panels

Freight class is 100.0. (•) MTS (made to stock) / ( ) MTO (made to order)

• Stainless steel insulated, hinged, lift-off lid with plastic coated pulls. • 21⁄2˝ (64mm) thick insulation on all sides, enclosed with galvanized steel outer liner. • Heavy gauge type 304 stainless steel inner liner is one-piece construction, all welded, ground and polished. • The liner features coved corners and copper tubing soldered to exterior sides and bottom. • Wired to 6´ (1829mm) cord & plug. Note:

Locking lid device available. To order, add $413 to list price and add suffix -L to model number. Example: DCS2-ICU-L

ice cream length capacity cu ft in. mm lbs. kg cap.

weight cu lbs. kg ft

36˝ 50˝

250 285

Note:

218

Refer to page 227 for optional overall heights and optional heights of tray slides available for units on this page.

914 1270

100 150

45.4 68.0

2.6 4.2

113.4 129.3

electrical data

model #

22 1/4HP, 120V, 6.8A DCS2-ICU 30 1/4HP, 120V, 6.8A DCS3-ICU

list 9687 11260

For 5-year compressor warranty, add List Price of $239. Must be ordered when ordering Ice Cream Unit(s).

Receptacle Configurations Required for Refrigerated Milk Unit and Ice Cream Units

15 AMP 125V furnished with NEMA 5-15 plug

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


DIRECTOR’S CHOICE® MODULAR CAFETERIA SERVING UNITS Catalog Section 33

Carving Station Unit

CUSTOM

see spec sheet

EG33.12

• • • • •

Fully insulated. Adapter plate, meat spike and gravy pan. 3 ⁄4˝ (19mm) drain with valve. Thermostatic controls. 120V operation wired to 6´(1829mm) cord and plug. • Two laminate end panels included. Receptacle Configuration Required for Carving Station

shown with optional tray slide

length weight cu in. mm lbs. kg ft 36˝ 914 275 124.7 22

electrical data

model #

list

1200W, 120V, 10.4A DCS2-CSU 8817

Optional Bullet Lamps for Carving Station Unit • Stainless steel tubular frame, 8˝ (203mm) adjustable height. • Aluminum bulb shield. On/Off switch. • 6´ (1829mm) cord and NEMA 5-15 plug. (Includes two cords and plugs when ordered with bullet lamp.) description bullet lamp only with sneeze guard

bulb clearance in. mm

electrical data

95⁄8˝-175⁄8˝ 245-448 120V, 4.2A, 500W 95⁄8˝-175⁄8˝ 245-448 120V, 4.2A, 500W

15 AMP 125V furnished with NEMA 5-15 plug

Features: • Type 304 stainless steel construction. • 16 gauge type 304 stainless steel top is 30˝ (762mm) front-to-back, 2˝ (51mm) tall. • 34˝ (864mm) standard working height complies with ADA guidelines for accessibility standards. • Welded 11⁄2˝ (38mm) square tubular type 304 stainless steel base construction. • Open base on three sides – 73⁄16˝ (183mm) tall type 304 stainless steel apron on operator’s side. • 5˝ (127mm) poly tread swivel casters (two with brake). • Standard holly berry red front laminate panel (Wilsonart® D307-60) on heavy gauge galvanized subpanel. Note:

add add suffix # to list -BL 1318 -BLS 3623

Hot Food Service Counters…

CUSTOM

see spec sheet

EG33.20

• Type 304 stainless steel top is welded and polished. • Welded 11⁄2˝ (38mm) type 304 stainless steel square tubular base construction. • Fully-insulated heat wells are sealed, accept 12˝ x 20˝ (305 x 508mm) food pans, and feature individual thermostat controls. • Standard 5˝ (127mm) casters with poly tread.

Consult factory for pricing.

All units are predrilled to accommodate accessories such as tray slides, work shelves, and removable undershelves (pages 227-229). Laminate end panels available for all units. To order, add suffix “-LEP” to model n umber and $371 to list price. Example: DCS2-CSU-LEP. Stainless steel front panels available for all units. To order, add suffix “-S” to model number. See chart on page 227 for list price. Example: DCS2-CSU-S. Stainless steel end panels available for all units. To order, add suffix “-SEP” to model number and $434 to list price. Example: DCS2-CSU-SEP.

Freight class is 100.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Refer to page 227 for optional overall heights and optional heights of tray slides available for units on this page.

…with “U” shaped Configuration # of wells

“U” shaped – ideal for tray makeup conveyor or school-serving line

3 3 3 4 4 5 5 6 6

length in. mm 50˝ 50˝ 50˝ 64˝ 64˝ 78˝ 78˝ 96˝ 96˝

1270 1270 1270 1626 1626 1981 1981 2438 2438

volts

watts

120V 208/240V 208/240V 208/240V 208/240V 208/240V 208/240V 208/240V 208/240V

3600W 2700/3600W 3600/4800W 3600/4800W 4800/6400W 4500/6000W 6000/8000W 5400/7200W 7200/9600W

SINGLE-PHASE amps model # 30.0A DCS3-TMU-A 13.0/15.0A DCS3-TMU-B 17.3/20.0A DCS3-TMU-C 17.3/20.0A DCS4-TMU-B 23.1/26.7A DCS4-TMU-C 21.6/25.0A DCS5-TMU-B 28.8/33.4A DCS5-TMU-C 26.0/30.0A DCS6-TMU-B 34.6/40.0A DCS6-TMU-C

amps

THREE-PHASE model #

n/a 7.5/8.7A 10.0/11.6A 11.5/13.2A 15.3/17.7A 15.0/17.3A 20.0/23.1A 15.0/17.3A 20.0/23.1A

n/a

DCS3-TMU-B-3 DCS3-TMU-C-3 DCS4-TMU-B-3 DCS4-TMU-C-3 DCS5-TMU-B-3 DCS5-TMU-C-3 DCS6-TMU-B-3 DCS6-TMU-C-3

…with “L” shaped Configuration # of wells “L” shaped – ideal for tray makeup line.

4 4

length in. mm

SINGLE-PHASE amps model # 64˝ 1626 208/240V 4800/6400W 23.1/26.7A DCS4-TMLL 64˝ 1626 208/240V 4800/6400W 23.1/26.7A DCS4-TMLR volts

watts

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

THREE-PHASE model # 15.3/17.7A DCS4-TMLL-3 15.3/17.7A DCS4-TMLR-3

amps

219


DIRECTOR’S CHOICE® MODULAR CAFETERIA SERVING UNITS Catalog Section 33

Cashier Units

CUSTOM

see spec sheet

EG33.03

cashier unit – server side – shown with optional laminate end panels and removable undershelf

length weight cu in. mm lbs. kg ft 24˝ 36˝

610 235 914 285

106.6 129.3

INLINE LEFT END* RIGHT END** model # list model # list model # list DCS-CUI-24 4455 DCS-CUEL-24 4455 DCS-CUER-24 4455 DCS-CUI-36 6951 DCS-CUEL-36 6951 DCS-CUER-36 6951

14 22

* Drawer is located on left end as viewed from Server Side of Director’s Choice®. ** Drawer is located on right end as viewed from Server Side of Director’s Choice®.

Optional Tray Slides for 24˝ (610mm) Cashier “End” Units • Stainless steel drop brackets. See page 227 for tray slides to fit 36˝ (914mm) units. description

length in. mm

111⁄2˝ (292mm) wide

24˝

610

SQUARE tubular model # list DC24-TS-TS 742

ROUND tubular Solid Ribbed model # list model # list DC24-TS-TSR 742 DC24-TS-SRS 742

Optional Work Shelves for 24˝ (610mm) Cashier “End” Units • Stainless steel drop brackets. See page 228 for work shelves to fit 36˝ (914mm) units.

description

length in. mm

8˝ (203mm) wide

24˝

610

11⁄4˝-THICK HARDWOOD model # list DC24-WS-MT 745

18/304 Stainless poly model # list model # list DC24-WS-ST 717 DC24-WS-PT 684

Optional Removable Undershelves for Cashier Units Solid Undershelves Louvered Undershelves description For inline units For 24˝ (610mm) long units For 36˝ (914mm) long units

model # DC24I-RSU DC24E-RSU DC36E-RSU

list 587 587 704

model # DC24I-RSUL DC24E-RSUL DC36E-RSUL

list 792 792 950

Features: • Foot rest welded to frame for strength. • Standard flush-fitting drawer with keyed tumbler lock – 18˝ x 207⁄16˝ x 3˝ (457 x 519 x 76mm) inner dimensions. • Drawer features double-pan front and recessed pull. • Type 304 stainless steel construction. • 16 gauge type 304 stainless steel top is 30˝ (762mm) front-to-back and 2˝ (51mm) tall. • 34˝ (864mm) standard working height complies with ADA guidelines for accessibility standards. • Welded 11⁄2˝ (38mm) square tubular type 304 stainless steel base construction. • Open base on three sides – 73⁄16˝ (183mm) tall type 304 stainless steel apron on operator’s side. • 5˝ (127mm) poly tread swivel casters (two with brake). • Standard holly berry red front laminate panel (Wilsonart® D307-60) on heavy gauge galvanized subpanel. Note:

All units are predrilled to accommodate accessories such as tray slides, work shelves, and removable undershelves (see pages 227-229). Laminate end panels available for all units. To order, add suffix “-LEP” to model number and $371 to list price. Example: DCS-CUI-24-LEP Stainless steel front panels available for all units. To order, add suffix “-S” to model number. See chart on page 227 for list price. Example: DCS-CUI-24-S. Stainless steel end panels available for all units. To order, add suffix “-SEP” to model number and $434 to list price. Example: DCS-CUI-24-SEP. Electrical options: convenience outlet 120V, low-voltage raceway. Consult factory for pricing.

Freight class is 100.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Optional Cash Trays and Covers for Cashier Units • Fits inside drawer. Lightweight, but constructed of durable ABS thermoplastic.

Tray Cover description model # 4-bill tray 366458 5-bill tray 366456

220

list model # 75 n/a 98 366457

list n/a 45

Refer to page 227 for optional overall heights and optional heights of tray slides available for units on this page.

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


DIRECTOR’S CHOICE® MODULAR CAFETERIA SERVING UNITS Catalog Section 33

Beverage Units

CUSTOM

see spec sheet

EG33.06

single-urn trough beverage unit shown with optional tray shelf and laminate end panels

• • • • •

Used in conjunction with countertop water coolers, beverage dispensers, etc. Urn troughs are 2˝ deep x 41⁄2˝-wide (51 x 114mm). Hat channel reinforced top. Trough is sloped to a 1˝ (25mm) diameter drain to operator’s left. Removable trough cover features louvered “anti-splash” design, and is sectional to fit in dishwasher for sanitation. length in. mm

weight lbs. kg

cu ft

drip trough length in. mm

36˝ 914 50˝ 1270 64˝ 1626 78˝ 1981

150 68.0 180 81.6 220 99.8 270 122.5

22 30 38 46

281⁄2˝ 423⁄4˝ 571⁄8˝ 711⁄2˝

724 1086 1451 1816

SINGLE-URN TROUGH model # list DCS2-BSU 4226 DCS3-BSU 4807 DCS4-BSU 5377 DCS5-BSU 5993

Features: • Type 304 stainless steel construction. • 16 gauge type 304 stainless steel top is 30˝ (762mm) front-to-back and 2˝ (51mm) tall. • 34˝ (864mm) standard working height complies with ADA guidelines for accessibility standards. • Welded 11⁄2˝ (38mm) square tubular type 304 stainless steel base construction. • Open base on three sides – 73⁄16˝ (183mm) tall type 304 stainless steel apron on operator’s side. • 5˝ (127mm) poly tread swivel casters (two with brake). • Standard holly berry red front laminate panel (Wilsonart® D307-60) on heavy gauge galvanized subpanel. Note:

DOUBLE-URN TROUGH model # list DCS2-BDU 5064 DCS3-BDU 5815 DCS4-BDU 6587 DCS5-BDU 7286

Frost Top Units

Laminate end panels available for all units. To order, add suffix “-LEP” to model number and $371 to list price. Example: DCS2-BSU-LEP. Stainless steel front panels available for all units. To order, add suffix “-S” to model number. See chart on page 227 for list price. Example: DCS2-BSU-S.

CUSTOM

see spec sheet

All units are predrilled to accommodate accessories such as tray slides, work shelves, and removable undershelves (see pages 227-229).

Stainless steel end panels available for all units except Corner Transition Units. To order, add suffix “-SEP” to model number and $434 to list price. Example: DCS2-BSU-SEP.

EG33.08

frost top unit shown with optional tray slide

Freight class is 100.0. (•) MTS (made to stock) / ( ) MTO (made to order)

• Used primarily for presentation of pre-plated cold foods. • 14 gauge stainless steel raised frost top stands 1˝ (25mm) above unit and features 1⁄2˝ (13mm) full perimeter gutter for melted condensate. • Gasket seal to top. • Fully insulated. 120V operation wired to 6´ (1829mm) cord & plug. length in. mm

weight cubic lbs. kg feet

36˝ 50˝ 64˝ 78˝ 96˝

220 275 325 365 470

Note:

914 1270 1626 1981 2438

99.8 124.7 147.4 165.6 213.2

22 30 38 46 57

electrical data 1/5HP, 120V, 3.9A 1/4HP, 120V, 6.8A 1/3HP, 120V, 9.8A 1/3HP, 120V, 9.8A 1/2HP, 120V, 10.7A

model # DCS2-FTU DCS3-FTU DCS4-FTU DCS5-FTU DCS6-FTU

list 8239 9216 10208 11149 13024

Receptacle Configurations Required for Frost Top Unit

15 AMP 125V furnished with NEMA 5-15 plug

For 5-year compressor warranty, add List Price of $227. Must be ordered when ordering Frost Top Unit(s).

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

221


DIRECTOR’S CHOICE® MODULAR CAFETERIA SERVING UNITS Catalog Section 33

Corner Transition Units

CUSTOM

see spec sheet optional work shelf

EG33.10

optional work shelf

corner transition unit – outside miter shown with optional tray slide and work shelf

corner transition unit – outside corner shown with optional tray slide and work shelf

• Front panels on Customer side of unit. • Consult factory for design specifics relating to floor plan intentions. Note:

#DCE end-only tray slides, work shelves, and rear doors and panels will NOT work with these units.

description

weight lbs. kg

outside corner outside miter inside corner inside miter

165 165 165 165

74.8 74.8 74.8 74.8

cubic feet model # 22 DCSC-CTU-OC 22 DCSC-CTU-OM 22 DCSC-CTU-IC 22 DCSC-CTU-IM

Features: • Type 304 stainless steel construction. • 16 gauge type 304 stainless steel top is 30˝ (762mm) front-to-back and 2˝ (51mm) tall. • 34˝ (864mm) standard working height complies with ADA guidelines for accessibility standards. • Welded 11⁄2˝ (38mm) square tubular type 304 stainless steel base construction. • Open base on three sides – 73⁄16˝ (183mm) tall type 304 stainless steel apron on operator’s side. • 5˝ (127mm) poly tread swivel casters (two with brake). • Standard holly berry red front laminate panel (Wilsonart® D307-60) on heavy gauge galvanized subpanel. Note:

list 2715 2857 2715 2857

Laminate end panels available for all units except Corner Transition Units. To order, add suffix “-LEP” to model number and $371 to list price. Example: DCS3030-TSND-LEP. Stainless steel front panels available for all units. To order, add suffix “-S” to model number. See chart on page 227 for list price. Example: DCS3030-TSND-S.

Optional Tray Slides for Corner Transition Units With fixed brackets. SQUARE tubular model # list DCOC-TS-TS 1266

All units are predrilled to accommodate accessories such as tray slides, work shelves, and removable undershelves (see pages 227-229).

ROUND tubular Solid Ribbed model # list model # list DCOC-TS-TR 1266 DCOC-TS-SRS 1897

Stainless steel end panels available for all units except Corner Transition Units. To order, add suffix “-SEP” to model number and $434 to list price. Example: DCS3030-TSND-SEP.

Optional Work Shelves for Corner Transition Units With fixed brackets. 8˝ x 8˝ (203mm) filler. 11⁄4˝-THICK Hardwood 18/304 Stainless model # list model # list DCOC-WS-MT 260 DCOC-WS-ST 228

Tray/Silverware/Napkin Dispenser Unit see spec sheet

Freight class is 100.0.

CUSTOM

(•) MTS (made to stock) / ( ) MTO (made to order)

EG33.16

• Elevating dispenser tray accommodates up to 100 107⁄8˝ x 15˝ (276 x 381mm) trays. • Four 33⁄4" diameter nylon silverware cylinders. • Napkin dispenser holds up to 500 napkins. length in. mm 30˝

222

762

description with dispensers

model # DCS3030-TSND

list 10432

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


DIRECTOR’S CHOICE® MODULAR CAFETERIA SERVING UNITS Catalog Section 33

Tray & Silverware Unit

CUSTOM

see spec sheet

EG33.09

• Elevating dispenser and eight nylon silver cylinders. • Locks to other units in serving line. length weight in. mm lbs. kg

cu ft

tray capacity (107⁄8˝ x 15˝ trays)

36˝

22

100

914

270

122.5

model # DCS2-TSU

list 7024

Features: • Type 304 stainless steel construction. • 16 gauge type 304 stainless steel top is 30˝ (762mm) front-to-back and 2˝ (51mm) tall. • 34˝ (864mm) standard working height complies with ADA guidelines for accessibility standards. • Welded 11⁄2˝ (38mm) square tubular type 304 stainless steel base construction. • Open base on three sides – 73⁄16˝ (183mm) tall type 304 stainless steel apron on operator’s side. • 5˝ (127mm) poly tread swivel casters (two with brake). • Standard holly berry red front laminate panel (Wilsonart® D307-60) on heavy gauge galvanized subpanel. Note:

Tray Platform Unit

CUSTOM

see spec sheet

EG33.21

All units are predrilled to accommodate accessories such as tray slides, work shelves, and removable undershelves (see pages 227-229). Laminate end panels available for all units except Tray Platform Unit. To order, add suffix “-LEP” to model number and $371 to list price. Example: DCS2-TSU-LEP. Stainless steel front panels available for all units. To order, add suffix “-S” to model number. See chart on page 227 for list price. Example: DCS2-TSU-S. Stainless steel end panels available for all units except Tray Platform Unit. To order, add suffix “-SEP” to model number and $434 to list price. Example: DCS2-TSU-SEP.

• • • • •

All-welded stainless steel construction. Open tubular design. Removable two-section undershelf. 10 nylon silverware cylinders. Holds up to 200 trays.

Note:

Freight class is 100.0. (•) MTS (made to stock) / ( ) MTO (made to order)

This is a freestanding unit not designed to lock together with other units. Optional laminates, front/end panels, tray slides, workboards, and serving shelves do not apply.

width x length in. mm 24˝ x 36˝

610 x 914

weight lbs. kg 250

113.4

cubic feet model # 22 DCS2-TPU

list 3367

Service for over 60 years.

Quality... Value... Reliability!

The EAGLE Advantage

HAVE YOU PROFITED TODAY? Right Down The Line, Director’s Choice® Modular Cafeteria Serving Units Work For You At Every Stop. From Hot Food Units To Frost Top Units, We Have it Covered. With Numerous Options and Custom Accessories, THEY ARE NOT ONLY FUNCTIONAL BUT STYLISH.

Call Your EAGLE GROUP Representative Now To Place Your Order. 100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

223


DIRECTOR’S CHOICE® MODULAR CAFETERIA SERVING UNITS Catalog Section 33

Rack/Tray Dispenser Units

• Enclosed on all four sides. • Lightweight stainless steel dispenser is easily removable for cleaning and uses a self-leveling carrier mechanism to dispense cups, glasses or trays in a serving line or beverage service point. • Carrier is suspended by nylon-coated braided metal cables fed off power drums on two sides. • Cable-stop limits carrier travel to 24˝ (620mm). • Weight capacity varies with height. • Type 304 stainless steel construction. • 16 gauge type 304 stainless steel top is 30˝ (762mm) front-to-back and 2˝ (51mm) tall. • 34˝ (864mm) standard working height complies with ADA guidelines for accessibility standards. • Welded 11⁄2˝ (38mm) square tubular type 304 stainless steel base construction. • 5˝ (127mm) poly tread swivel casters (two with brake). • Standard holly berry red laminate panel (Wilsonart® D307-60) on heavy gauge FEATURES: galvanized subpanel.

CUSTOM

see spec sheet

EG33.19

rack/tray dispenser unit shown with optional tray slide Note:

All units are predrilled to accommodate accessories such as tray slides, work shelves, and removable undershelves (see pages 227-229). Stainless steel front panels available for all units. To order, add suffix “-S” to model number. See chart on page 227 for list price. Example: DCS2020RD-S.

Freight class is 100.0.

Stainless steel end panels available. To order, add suffix “-SEP” to model number and $434 to list price. Example: DCS2020RD-SEP.

(•) MTS (made to stock) / ( ) MTO (made to order)

description

weight lbs. kg

cup or glass rack dispenser, for one stack of 20˝ x 20˝ racks cup and saucer dispenser, for one stack of 20˝ x 20˝ racks and two stacks of saucers tray dispenser, for one stack of 16˝ x 20˝ max. size trays tray and silverware dispenser, for one stack of 16˝ x 20˝ max. size trays and eight silverware cylinders

230 280 180 210

104.3 127.0 81.6 95.3

model # DCS2020RD DCS2020RDS * DCS1620TD DCS1620TDS

* This model uses #359106 drop-in dish dispensers. See page 225 for more information on drop-in dish dispensers.

Drop-In Dispensers for Rack/Tray Dispenser Units Factory-installed. rack or tray size in. mm 14˝ x 18˝ 12˝ x 16˝ 16˝ x 20˝ 20˝ x 20˝

356 x 457 305 x 406 406 x 508 508 x 508

flange (W x L) in. mm 23˝ x 71⁄4˝ 21˝ x 15˝ 25˝ x 191⁄4˝ 25˝ x 231⁄4˝

584 x 184 533 x 381 635 x 489 635 x 591

cutout (W x L) in. mm 22˝ x 161⁄4˝ 20˝ x 14˝ 24˝ x 181⁄4˝ 24˝ x 221⁄4˝

559 x 413 508 x 356 610 x 464 610 x 565

model # 359135 359136 359137 359139

list 2179 2179 2179 2179

CUSTOM COSMETICS AVAILABLE!! Laser-Cutting and Custom Decal Services!

(laser-cut)

224

(custom decal for Smyrna High School, Smyrna, DE)

Laser-cutting… • Offers a “high-tech” look. • Creates smooth curves along text/artwork. Decals… • Industrial-strength, factory-applied, yet more economical. • Vinyl with adhesive backing.

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

list 5017 5702 4893 6459


DIRECTOR’S CHOICE® MODULAR CAFETERIA SERVING UNITS Catalog Section 33

Drop-In Adjustable Dispensers see spec sheet

• • • • •

EG33.18

FEATURES:

Field-adjustable weight and diameter. Stainless steel and aluminum construction. Heated and unheated units available. Spring rate adjustable without the use of tools. Stylized nonmarking guideposts reduce chance of chipping. • Assured levelness via stabilizing mechanism. • On heated units, temperature range is 80˚–100˚F minimum, 110˚–160˚F maximum. • Heated units come with 5´(1524mm) long metal conduit that connects to 120V junction box. Note:

Dome covers available for heated units.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

drop-in adjustable plate dispenser

drop-in dish dispenser

Drop-In Adjustable Plate Dispensers • Adjusts to accommodate plates in various diameters. plate diameter in. mm 31⁄2˝–91⁄8˝ 91⁄4˝–117⁄8˝

89–232 235–302

cutout diameter in. mm 119⁄16˝ 145⁄16˝

294 364

UNSHIELDED/UNHEATED SHIELDED/UNHEATED weight weight lbs. kg model # list lbs. kg model # list 20 9.0 359100 1116 26 11.8 359102 1466 22 10.0 359101 1462 29 13.2 359103 1753

electrical data 120V, 3.2A 120V, 4.2A

SHIELDED/HEATED weight lbs. kg model # 28 12.7 359104 37 16.8 359105

list 2383 2787

SHIELDED/HEATED weight lbs. kg model # 18 8.2 359124 20 9.0 359125 26 11.8 359126 26 11.8 359127 27 12.2 359128 28 12.7 359129 30 13.6 359130 34 15.4 359131 36 16.3 359132

list 1818 1920 1953 2083 2234 2321 2436 2695 2976

Drop-In Dish Dispensers plate diameter in. mm up to 5˝ 51⁄8˝–53⁄4˝ 57⁄8˝–61⁄2˝ 65⁄8˝–71⁄4˝ 73⁄8˝–81⁄8˝ 81⁄4˝–91⁄8˝ 91⁄4˝–101⁄8˝ 101⁄4˝–117⁄8˝ 117⁄8˝–13˝

127 130–146 149–165 168–184 187–206 210–232 235–257 260–302 302–330

cutout diameter in. mm 77⁄16˝ 83⁄16˝ 815⁄16˝ 911⁄16˝ 109⁄16˝ 119⁄16˝ 129⁄16˝ 145⁄16˝ 157⁄16˝

189 208 227 246 268 294 319 364 392

UNSHIELDED/UNHEATED weight lbs. kg model # list 10 4.5 359106 813 11 5.0 359107 866 12 5.4 359108 904 13 5.8 359109 926 15 6.8 359110 1050 17 7.7 359111 1073 20 9.0 359112 1112 21 9.5 359113 1302 22 10.0 359114 1432

SHIELDED/UNHEATED weight lbs. kg model # list 15 6.8 359115 986 16 7.3 359116 1039 17 7.7 359117 1057 18 8.2 359118 1112 24 10.9 359119 1233 25 11.3 359120 1246 25 11.3 359121 1263 30 13.6 359122 1524 32 14.5 359123 1674

electrical data 120V, 1.8A 120V, 2.0A 120V, 2.3A 120V, 2.5A 120V, 2.7A 120V, 3.2A 120V, 3.5A 120V, 4.2A 120V, 4.6A

• For plastic condiment bottles. • Fits Cold Food Units (page 215-216), see spec sheet EG33.07A Hot Food Units (page 214), and Hot Food nt Service Counters (page 219). te Pa . U.S 69 • Type 300 series stainless steel construction. ,9 03 ,0 #7 • 27⁄16˝ (63mm) diameter holes punched for bottle dispensers. #SBH-1/6 • Fits on traditional one third- or sixth-size #SBH-1/3 food pan applications. FEATURES: (bottles not included) Freight class is 70.0.

Stainless Steel Bottle Holders

description 7˝ x 61⁄2˝ x 51⁄2˝ (178 x 165 x 140mm), holds four bottles 7˝ x 123⁄4˝ x 51⁄2˝ (178 x 324 x 140mm), holds eight bottles

model # SBH-1/6 SBH-1/3

list 84 95

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

(•) MTS (made to stock) / ( ) MTO (made to order)

225


DIRECTOR’S CHOICE® MODULAR CAFETERIA SERVING UNITS Catalog Section 33

Dish/Cup Dispenser Units see spec sheet

• Dispensers included. • Fully mobile - standard 5˝ (127mm) casters, two with brake (brake casters on server side). • Standard holly berry red (Wilsonart® D307-60) laminate mounted on 18 gauge galvanized sub-panel on all four sides. FEATURES: Freight class is 92.5.

CUSTOM

EG33.17

(•) MTS (made to stock) / ( ) MTO (made to order)

model #DCS-PUD-4T –with optional tray slide

Heated Units • Temperature range is 80˚–100˚F minimum, 110˚–160˚F maximum. • Heated units feature shielded dispensers and come with 5´(1524mm) long cord(s) and plug(s). Note:

Optional dome covers available for heated units.

description two-tube dispenser, heater: 760W, 120V or 208V three-tube dispenser, heater: 900W, 120V or 208V four-tube dispenser, heater: 1200W, 120V or 208V four-tube dispenser, heater: 1520W, 120V or 208V cup/saucer dispenser, tubular type, heater: 500W, 120V or 208V

91⁄8˝ (232mm) plates

220

99.8

applicable drop-in dispenser model # 359129

71⁄4˝ (184mm) plates

270

122.5

359127

DCS-PUD-3TH

8690

71⁄4˝ (184mm) plates

320

145.2

359127

DCS-PUD-4TH

10572

91⁄8˝ (232mm) plates

350

158.8

359129

DCS-PUD-5TH

12821

117⁄8˝ (302mm) trays

240

108.9

359131

DCS-PUDT-CSH

7132

model # DCS-PUD-2T DCS-PUD-3T DCS-PUD-4T DCS-PUD-5T DCS-PUDT-CS

list 4990 5561 6403 8291 4950

dish/cup MAXIMUM diameter

weight lbs. kg

model # DCS-PUD-2TH

list 7254

Non-Heated Units Includes unshielded dispensers.

description two-tube dispenser three-tube dispenser four-tube dispenser four-tube dispenser cup/saucer dispenser, tubular type

dish/cup MAXIMUM diameter 91⁄8˝ (232mm) plates 71⁄4˝ (184mm) plates 71⁄4˝ (184mm) plates 91⁄8˝ (232mm) plates 117⁄8˝ (302mm) trays

weight lbs. kg 150 165 180 210 160

68.0 74.8 81.6 95.3 72.6

applicable drop-in dispenser model # 359111 359109 359109 359111 359113

SPRING-LOADED DOCKING DEVICE keeps adjoining units together without the use of tools. On all models pages 214-226.

226

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


DIRECTOR’S CHOICE® MODULAR CAFETERIA SERVING UNITS Catalog Section 33

Varied Working Heights of Director’s Choice® Units see spec sheet EG33.07A

FEATURES:

• Available for Director’s Choice® units on pages 214-224, except for Refrigerated Milk Unit. • No charge. • Consult factory for limitations.

working height tray slide height* add prefix** in front description of unit of unit of DCS # 25˝ (635mm) E*** “Elementary School” 28˝ (711mm) 27˝ (686mm) M “Middle School” 30˝ (762mm) “High School” 34˝ (864mm)**** 31˝ (787mm) * To order units with varied tray slide heights, consult factory. ** Example: MDCS3-HFU-A *** Elementary School height currently not available for “-CFURN” Cold Food Units (page 215). **** Standard overall height of all units.

Stainless Steel Front Panels see spec sheet EG33.07A

FEATURES:

• Heavy gauge type 304 stainless steel. • Available in place of standard laminate front panels. • See pages 214-224 for optional laminate end panels and stainless steel end panels available.

stainless steel front panels

add suffix # -S -S -S -S -S -S

description For 24˝ (610mm) long units For 36˝ (914mm) long units For 50˝ (1270mm) long units For 64˝ (1626mm) long units For 78˝ (1981mm) long units For 96˝ (2438mm) long units

add to list 105 155 177 199 234 262

Tray Slides

• • • •

see spec sheet EG33.07A

FEATURES:

111⁄2˝ (292mm) wide. Heavy gauge type 304 stainless steel. Stainless steel drop brackets included. Available in 1˝ (25mm) square tubular 3-bar style, 11⁄4˝ (32mm) diameter round tubular 3-bar style, or solid with two raised “ribs”.

tray slide

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

description

length weight cu in. mm lbs. kg ft

For end only * For 36˝ (914mm) long units For 50˝ (1270mm) long units For 64˝ (1626mm) long units For 78˝ (1981mm) long units For 96˝ (2438mm) long units

30˝ 36˝ 50˝ 64˝ 78˝ 96˝

762 914 1270 1626 1981 2438

26 30 36 40 52 75

11.8 13.6 16.3 18.1 23.6 34.0

1.0 1.0 1.4 1.8 2.2 2.7

SQUARE tubular model # list DCE-TS-TS 742 DC2-TS-TS 895 DC3-TS-TS 962 DC4-TS-TS 1034 DC5-TS-TS 1137 DC6-TS-TS 1397

ROUND tubular model # list DCE-TS-TSR 742 DC2-TS-TSR 895 DC3-TS-TSR 962 DC4-TS-TSR 1034 DC5-TS-TSR 1137 DC6-TS-TSR 1397

Solid Ribbed model # DCE-TS-SRS DC2-TS-SRS DC3-TS-SRS DC4-TS-SRS DC5-TS-SRS DC6-TS-SRS

list 1124 1347 1446 1557 1712 2084

* Must be factory-installed.

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

227


DIRECTOR’S CHOICE® MODULAR CAFETERIA SERVING UNITS Catalog Section 33

Work Shelves FEATURES:

see spec sheet EG33.07A

• 8˝ (203mm) wide. • Stainless steel drop brackets. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

work shelf

description For end only * For 36˝ (914mm) long units For 50˝ (1270mm) long units For 64˝ (1626mm) long units For 78˝ (1981mm) long units For 96˝ (2438mm) long units

length weight cu 11⁄4"-thick hardwood in. mm lbs. kg ft model # list 30˝ 762 26 11.8 1.0 DCE-WS-MT 708 36˝ 914 30 13.6 1.0 DC2-WS-MT 846 50˝ 1270 36 16.3 1.4 DC3-WS-MT 911 64˝ 1626 40 18.1 1.8 DC4-WS-MT 978 78˝ 1981 52 23.6 2.2 DC5-WS-MT 1076 96˝ 2438 75 34.0 2.7 DC6-WS-MT 1321

18/304 stainless model # list DCE-WS-ST 717 DC2-WS-ST 858 DC3-WS-ST 991 DC4-WS-ST 1116 DC5-WS-ST 1237 DC6-WS-ST 1518

⁄2"-thick poly model # list DCE-WS-PT 684 DC2-WS-PT 821 DC3-WS-PT 943 DC4-WS-PT 1067 DC5-WS-PT 1185 DC6-WS-PT 1453 1

⁄2"-thick Richlite® model # list DCE-WS-RL 797 DC2-WS-RL 954 DC3-WS-RL 1099 DC4-WS-RL 1239 DC5-WS-RL 1380 DC6-WS-RL 1692 1

* Must be factory-installed.

Sneeze Guards see spec sheet EG33.07B FEATURES:

• Stainless steel shelf with 15⁄64˝ (6mm) thick fixed sneeze guards made of Tuffak® CM-2 abrasion-resistant material polycarbonate. Note:

single tier sneeze guard

Fully Enclosed Sneeze Guards available. For ‘pass-over’ operation. Facilitates complete food protection. To order, replace “SO” in model number with “SOF” (example: DC2-SOF-ST), and add 25% to list price. Tempered glass panels available—add 20% to list price. ALLOW FOUR-WEEK LEAD TIME.

double tier sneeze guard

Freight class is 70.

Sneeze guards must be ordered at the same time as base unit. Factory installation of sneeze guards and sneeze guard options is required.

(•) MTS (made to stock) / ( ) MTO (made to order)

Single Tier 14˝-tall x 157⁄16˝-wide (356 x 386mm). Lengths noted in chart are nominal.

description

length weight in. mm lbs. kg

For 36˝ (914mm) long units For 50˝ (1270mm) long units For 64˝ (1626mm) long units For 78˝ (1981mm) long units For 96˝ (2438mm) long units

36˝ 50˝ 64˝ 78˝ 96˝

914 50 22.7 1270 88 39.9 1626 125 56.7 1981 155 70.3 2438 240 108.9

cu ft model # 6.7 DC2-SO-ST 9.3 DC3-SO-ST 11.9 DC4-SO-ST 14.4 DC5-SO-ST 17.8 DC6-SO-ST

list 1493 1722 2528 2908 3474

Double Tier 24˝-tall x 241⁄2˝-wide (610 x 622mm). Lengths noted in chart are nominal.

description

length weight in. mm lbs. kg

For 36˝ (914mm) long units For 50˝ (1270mm) long units For 64˝ (1626mm) long units For 78˝ (1981mm) long units For 96˝ (2438mm) long units

36˝ 50˝ 64˝ 78˝ 96˝

914 80 36.3 1270 118 53.5 1626 155 70.3 1981 185 83.9 2438 270 122.5

cu ft model # 16.3 DC2-SO-DT 22.6 DC3-SO-DT 28.9 DC4-SO-DT 35.2 DC5-SO-DT 43.3 DC6-SO-DT

* Display lights are 120V and come with 6´(1829mm) cord and NEMA 5-15P plug to exit through base at operator’s right. Cannot be used on hot food units or with optional heat lamps. One light fixture per tier. ** Heat lamps attach to underside of sneeze guard (or to underside of bottom sneeze guard

228

list 3432 3633 4659 5645 6500

Options for Single Sneeze Guards REDHOTS® Display Lights* (add suffix “-L)*** list 640 740 857 973 1089

REDHOTS® End 120V Heat Lamps** Guards *** (add suffix “-F”) (add suffix “-EG”) electrical data list list 120V, 3.8A, 450W 1014 707 120V, 5.6A, 675W 1057 707 120V, 8.8A, 1050W 1091 707 120V, 10.6A, 1275W 1256 707 120V, 12.5A, 1500W 1466 707

Options for Double Sneeze Guards REDHOTS® Display Lights* (add suffix “-L)*** list 1279 1481 1714 1945 2250

REDHOTS® End 120V Heat Lamps** Guards *** (add suffix “-F”) (add suffix “-EG”) electrical data list list 120V, 3.8A, 450W 1014 1348 120V, 5.6A, 675W 1057 1348 120V, 8.8A, 1050W 1091 1348 120V, 10.6A, 1275W 1256 1348 120V, 12.5A, 1500W 1466 1348

for double-tier). 120V. Includes 6´(1829mm) cord and NEMA 5-15P plug (NEMA 5-20P on 1500W unit). Heat lamps cannot be used with optional display lights. 450 to 1500W output depending on length. See page 239 for REDHOTS® Heat Lamps. *** Example of suffixes: DC3-SO-ST-L-EG

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


DIRECTOR’S CHOICE® MODULAR CAFETERIA SERVING UNITS Catalog Section 33

Serving Shelves and Buffet Shelves

FEATURES:

see spec sheet EG33.07B

• Clear polycarbonate sneeze guards. Freight class is 85.0. (•) MTS (made to stock) / ( ) MTO (made to order)

serving shelf

buffet shelf

Buffet Shelves

Serving Shelves

237⁄8˝–277⁄8˝ 151⁄2˝ height. For cafeteria line. adjustable height.

description

weight lbs. kg

For 36˝ (914mm) long units For 50˝ (1270mm) long units For 64˝ (1626mm) long units For 78˝ (1981mm) long units For 96˝ (2438mm) long units

25 30 35 40 50

11.3 13.6 15.9 18.1 22.7

model # SSH2 SSH3 SSH4 SSH5 SSH6

list 2171 2426 2814 3647 4035

model # BSH2 BSH3 BSH4 BSH5 BSH6

list 3323 3509 3727 4961 5905

Tilt/Adjustable Sneeze Guards 151⁄2˝ height.

model # ASH2 ASH3 ASH4 ASH5 ASH6

list 2496 2789 3237 4195 4640

tilt/adjustable sneeze guard

Undershelves, Rear Doors and Panels see spec sheet EG33.07A

rear lift-off panels (louvered shown)

undershelf

Removable Undershelves

Rear Doors and Panels

Type 304 stainless steel. Lifts out without tools. Available for all units except Refrigerated Milk Units and Ice Cream Units. Consult factory for limitations.

Stainless steel. Call factory for available models.

Rear Doors* Rear Panels Solid Undershelves Louvered Undershelves Hinged Sliding Fixed Lift-Off

description For 36˝ (914mm) long units For 50˝ (1270mm) long units For 64˝ (1626mm) long units For 78˝ (1981mm) long units For 96˝ (2438mm) long units

model # DC2-RSU DC3-RSU DC4-RSU DC5-RSU DC6-RSU

list 668 748 895 1074 1272

model # DC2-RSUL DC3-RSUL DC4-RSUL DC5-RSUL DC6-RSUL

list 901 979 1126 1308 1504

list 1327 1536 1908 2013 2251

list list 1152 532 1337 611 1659 722 1751 798 1959 1213

list 718 824 971 1076 1635

* Optional locks available for Rear Doors. $201 list.

Also available: REDHOTS® Heat Lamps see page 239 Or download our spec sheet EG35.23 off our website www.eaglegrp.com 100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

REDHOTS® Display Lights see page 240 Or download our product announcement EG8171 off our website www.eaglegrp.com

229


DIRECTOR’S CHOICE® MODULAR CAFETERIA SERVING UNITS Catalog Section 33

Custom Accessories for Director’s Choice® – Per Application Decorative Deluxe Sneeze Guards see product announcement

EG8154

Heat Lamps

• Fabricated from stainless steel tubing. • Frame finish available in stainless steel, or color epoxy (see “Powder Coating” chart below). • Polycarbonate Tuffak® CM-2 “glass” panels. • Tempered glass (meets ANSI Z97.1) available— add 20% to list price. • Edges trimmed with a metal channel and available with optional end guards for further protection. • Sneeze guards must be factory located and installed to Director’s Choice® equipment. FEATURES:

Attaches to underside of sneeze guard (or to underside of bottom sneeze guard on double-tier units). Wired to cord and plug, exit base of unit. Specify model number with EAGLE’s SpecFAB® department. length fits Series in. mm DCS2 DCS3 DCS4 DCS5 DCS6

36˝ 50˝ 64˝ 78˝ 96˝

914 1270 1626 1981 2438

add * suffix 120V, 3.8A, 450W -F 120V, 5.6A, 675W -F 120V, 8.8A, 1050W -F 120V, 10.6A, 1275W -F 120V, 12.5A, 1500W -F electrical data

Note:

Fluorescent lights must be factory-installed. Consult factory. Fully Enclosed Sneeze Guards available. For CafeteriaStyle Sneeze Guards only. Facilitates ‘pass-over’ operation for complete food protection. To order, replace “DSG” in model number with “DSGF” (example: DCS2-DSGF-CST), and add 25% to list price.

list price 1014 1057 1091 1256 1466

Freight class is 85.0. (•) MTS (made to stock) / ( ) MTO (made to order)

* Example: DCS2-DSG-CST-F

Optional End Guards

Single-Tier Sneeze Guards fits Series

# of length CAFETERIA STYLE legs in. mm model # list 2 36˝ 914 DCS2-DSG-CST 2285 2 50˝ 1270 DCS3-DSG-CST 2632 3 64˝ 1626 DCS4-DSG-CST 2980 3 78˝ 1981 DCS5-DSG-CST 4410 3 96˝ 2438 DCS6-DSG-CST 4952

DCS2 DCS3 DCS4 DCS5 DCS6 * Example: DCS2-DSG-CST-EG

BUFFET STYLE model # list DCS2-DSG-BST 3790 DCS3-DSG-BST 4374 DCS4-DSG-BST 4952 DCS5-DSG-BST 7546 DCS6-DSG-BST 8708

# of length CAFETERIA STYLE legs in. mm model # list 2 36˝ 914 DCS2-DSG-CDT 4836 2 50˝ 1270 DCS3-DSG-CDT 5725 3 64˝ 1626 DCS4-DSG-CDT 6499 3 78˝ 1981 DCS5-DSG-CDT 10137 3 96˝ 2438 DCS6-DSG-CDT 11957

DCS2 DCS3 DCS4 DCS5 DCS6 * Example: DCS2-DSG-CDT-EG

BUFFET STYLE model # list DCS2-DSG-BDT 4720 DCS3-DSG-BDT 5725 DCS4-DSG-BDT 6617 DCS5-DSG-BDT 10445 DCS6-DSG-BDT 12498

Specify model number with EAGLE’s SpecFAB department.

DCS2 DCS3 DCS4 DCS5 DCS6

36˝ 50˝ 64˝ 78˝ 96˝

914 1270 1626 1981 2438

White, Black, Gray, or Red EAGLE Stand-Outs™ colors* list price list price 406 885 541 1063 608 1276 622 1529 812 1837

* See page 61 for the entire list of decorative Stand-Outs™ custom colors.

230

list 1348 1348 1348 1348 1348

Incandescent. Wired to cord and plug, exit base of unit.

®

length in. mm

add suffix* -EG -EG -EG -EG -EG

REDHOTS® Display Lights

Powder Coating fits Series

list 707 707 707 707 707

Optional End Guards

Double-Tier Sneeze Guards fits Series

add suffix* -EG -EG -EG -EG -EG

fits Series

FOR SINGLElength TIER UNITS in. mm add suffix* list 36˝ 914 -L 640 50˝ 1270 -L 740 64˝ 1626 -L 857 78˝ 1981 -L 973 96˝ 2438 -L 1089

DCS2 DCS3 DCS4 DCS5 DCS6 * Example: DCS2-DSG-BST-L

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

FOR DOUBLETIER UNITS add suffix* list -L 1279 -L 1481 -L 1714 -L 1945 -L 2250


DIRECTOR’S CHOICE® MODULAR CAFETERIA SERVING UNITS Catalog Section 33

Decorative Perimeter Skirts see product announcement

FEATURES:

EG8154

• Matches framework construction of unit base. • Serves as fixed skirt and kick plate. Freight class is 85.0. (•) MTS (made to stock) / ( ) MTO (made to order)

perimeter skirt

End Skirts

Front Skirts and Rear Skirts • Front Skirts feature recessed casters which are hidden by perimeter bumper, giving the unit a sleek modern look. description

length in. mm

For 36˝ (914mm) long units For 50˝ (1270mm) long units For 64˝ (1626mm) long units For 78˝ (1981mm) long units For 96˝ (2438mm) long units

36˝ 50˝ 64˝ 78˝ 96˝

914 1270 1626 1981 2438

FRONT SKIRTS model # list DC2-FS 932 DC3-FS 968 DC4-FS 991 DC5-FS 1066 DC6-FS 1221

REAR SKIRTS model # list DC2-RS 266 DC3-RS 295 DC4-RS 323 DC5-RS 390 DC6-RS 551

description

length in. mm

For end only

30˝

762

model # DC2-ES

list 246

Other Custom Accessories available – per application

recessed casters

• Cutting Boards • Receptacles and Remote Switches • Custom Cutouts • Recessed Casters • Pricing for Convenience Outlets - Outlet/Box only field-wired. - Outlet/Box/Cord & Plug. - Outlet/Box/Cord & Plug/Fuse.

CUSTOM COSMETICS AVAILABLE!! Laser-Cutting and Custom Decal Services!

(laser-cut)

(custom decal for Smyrna High School, Smyrna, DE)

Laser-cutting… • Offers a “high-tech” look. • Creates smooth curves along text/artwork. Decals… • Industrial-strength, factory-applied, yet more economical. • Vinyl with adhesive backing.

The SpecFAB® Division Catering to the custom fabrication needs of the Foodservice and Retail Display industries.

Email: quotes@eaglegrp.com • Fax: 302-653-3091 Our trained staff will begin planning, layout and quotation upon receipt. 100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

231


NOTES ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________

232

____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


Cooking & Warming Equipment Accessories/Replacements Adapter Tops ....................................241 Bulbs for Bulb Warmers ..................238 Griddle Plate ....................................235 Baskets for Fryers ............................242 Food Pans, Lids, Insets....................248 Roll Top Cover..................................248 Mounting Plates ......................245, 246 Night Cover ......................237, 238, 242 Recessed Control Panels..................246

Gang Drop-In Electric Hot Food Unts ....................245 Sealed Well Hot Food Units..............244

Hot Dog Merchandisers/Units and Hot Food Merchandising Cart Hot Dog Merchandisers....................247 Hot Dog Sterno Units ......................247 Hot Food Merchandising Carts ........247

REDHOTS® Drop-In Style Food Warmers Rectangular ......................................246 Round ..............................................245

Bulb Warmers ..................................238 Countertop Cooker/Warmers............241 Countertop Food Warmers ..............240 Display Lights ..................................240

Electric Fryers ..................................242 Heat Lamps ......................................239 Heated Drawers................................243 Pass-Thru Heated Drawers ..............241

REDHOTS® Chef’s Line® Charbroilers......................................235 Fryers - Double ................................238 Fryers - Single..................................237 Griddles - Electric ............................237 Griddles - Gas ..................................236 Hot Plates - Electric..........................236 Hot Plates - Gas ..............................235

Look what’s on the menu… Whether you are cooking, warming, frying, or charbroiling, EAGLE GROUP is there to meet your needs. EAGLE GROUP’s cooking & warming equipment includes food warmers, cooker/warmers, fryers, hot plates, charbroilers, griddles, bulb warmers, heated drawers, and more. While designed to meet the highest industry standards, EAGLE GROUP’s RedHots® and RedHots® Chef’s Line® product lines combine beauty and durability.

233


Introducing...

Comprising a full range of models including fryers, charbroilers, griddles and hot plates, the Chef's Line® series is especially engineered for foodservice operations where heavy-duty equipment use is encountered on a daily basis. Bullnosed edge provides solid protection to controls. Controls are front-mounted for easier and safer operation.

We are “UL 197 Rev 9” compliant!

See pages 235 and 238 for models available.

“UL” stands for Underwriters Laboratories Inc. (UL), a nongovernmental organization formed in 1894 to help reduce injury, loss of life and property damage. UL scientifically investigates and tests thousands of types of products, materials, constructions and systems to evaluate electric, fire and casualty hazards.

Gas Hot Plates • • • •

25,000 BTU/hr burners on all units. Full-size polished stainless steel crumb tray. Available in flat-top and step-up styles. Complete with convertible pressure regulator and orifices for field conversion to liquid propane.

Electric Hot Plates • Electric units feature swing-up elements with individual crumb trays, removable for easy cleaning. • Infinite controls provide adjustable heat settings and are equipped with an On-Off light.

Gas Charbroilers • Heavy duty cast iron cooking grates can be individually positioned flat or angled. • 40,000 BTU/hr burners on NG radiant units; 32,000 BTU/hr burners on lava rock units. • Front trough with chute located at left end.

The UL mark is one of the most recognized and trusted symbols in the world. It means that UL has tested samples of our products and has conducted unannounced periodic inspections. It's an assurance that steps have been taken in the interest of safety. The latest edition of “UL 197” is the UL Standard for Safety for Commercial Electric Cooking Appliances.

Gas or Electric Griddles • 3⁄4˝ (19mm) thick smooth polished steel griddle plate fully welded to top assembly. • 13˝ (330mm) working height adjustable to 14˝ (356mm). • 4˝ (102mm) sides and rear splash sloped front-to-back. • 71⁄2-quart polished stainless steel grease drawer.

Our electric REDHOTS® and REDHOTS® Chef’s Line® equipment comply with UL 197 Rev 9 —THE BEST!

Electric Single-Tank and Double-Tank Fryers • All-stainless steel deep-drawn one-piece construction fry tanks, removable for easy cleaning. • Snap-action thermostat complete with indicator light for accurate temperature control. • Heavy-plated fry baskets—two provided with single-tank units; four provided with double-tank units.

234

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


COOKING & WARMING EQUIPMENT Catalog Section 35

REDHOTS® Chef’s Line® Charbroilers see spec sheet

• Controls are at a 45˚ angle for ergonomic operation.

EG35.17

NOTE: INTENDED FOR OTHER THAN HOUSEHOLD USE. THIS COMMERCIAL APPLIANCE MUST BE INSTALLED WITHIN SURROUNDINGS AND VENTILATION REQUIREMENTS AS DICTATED BY NATIONAL AND/OR LOCAL CODE.

Bullnosed edge provides solid protection to controls. Radiant and Lava Rock Units look the same.

Radiant Units • Heavy gauge stainless steel radiants combine with cast iron burner assembly for even heat distribution. width weight cubic BTU* in. mm lbs. kg feet rating

model #

list

FEATURES:

24˝ 610 178 80.7 10 80,000 CLCHRB-24-NG • 2738 36˝ 914 245 111.1 13 120,000 CLCHRB-36-NG • 3778 48˝ 1524 309 140.2 17 160,000 CLCHRB-48-NG • 4979 * NG units rated at 40,000 BTU per 12˝, rated at 38,000 BTU per 12˝ when converted to LP.

• 31⁄2˝ (89mm) wide front trough, with chute located at left end, accommodates standard spatula. • Heavy duty cast metal legs with flanged feet adjustable from 4˝ to 5˝ (102 to 127mm). • Heavy duty cast iron cooking grates can be individually positioned flat or angled. • 13˝ (330mm) working height adjustable to 14˝ (356mm). • 4˝ (102mm) sides and rear splash sloped front-to-back. • Natural gas (NG) complete with convertible pressure regulator and orifices for field conversion to liquid propane (LP). • 3⁄4˝ (19mm) NPT gas connection. • Full size polished stainless steel grease pan with baffles—48˝ (1219mm) units provided with two grease pans. Freight class is 65.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Lava Rock Units

Removable Griddle Plate for all Charbroilers

• Grate for lava rock placement and natural lava rocks for even heat distribution with cast iron burner assembly. • Lava rocks supplied. Use maximum of 4 lbs. per burner. Replacement lava rocks available. 4-lb. bag: Part #375952, $15 list price; 8-lb. bag: Part #332130, $30 list price.

• 12˝ (305mm) wide. • Replaces two cooking grates.

width weight cubic BTU in. mm lbs. kg feet rating 24˝ 36˝ 48˝

610 914 1524

178 245 309

80.7 111.1 140.2

10 13 17

64,000 96,000 128,000

model # CLCHRBL-24-NG • CLCHRBL-36-NG • CLCHRBL-48-NG •

weight cubic lbs. kg feet model # 86 39.0 3.25 RGP-2

list 1983 2743 3876

REDHOTS® Chef’s Line® Hot Plates - Gas see spec sheet

EG35.21

NOTE: INTENDED FOR OTHER THAN HOUSEHOLD USE. THIS COMMERCIAL APPLIANCE MUST BE INSTALLED WITHIN SURROUNDINGS AND VENTILATION REQUIREMENTS AS DICTATED BY NATIONAL AND/OR LOCAL CODE.

Bullnosed edge provides solid protection to controls.

FEATURES:

Flat Top Units width x depth in. mm 123⁄8˝ x 285⁄8˝ 243⁄8˝ x 285⁄8˝ 363⁄8˝ x 285⁄8˝

314 x 727 619 x 727 924 x 727

BTU rating

weight lbs. kg

cu ft

50,000 100,000 150,000

70 110 190

7 14 21

31.8 49.9 86.2

list 1307

model # CLHP-2-NG • CLHP-4-NG CLHP-6-NG

• Controls are at a 45˚ angle for easier operation. • Standing pilot for safe and easy operation, heavy duty cast metal legs with flanged feet adjustable from 4˝ to 5˝ (102 to 127mm), and heavy duty cast iron grates. • All units are for natural gas (NG), complete with convertible pressure regulator and orifices for field conversion to liquid propane (LP). • Full size polished stainless steel drip pan included. Freight class is 92.5. (•) MTS (made to stock) / ( ) MTO (made to order)

Step-Up Units weight cu list lbs. kg ft 1203 78 35.4 9 1936 125 56.7 18 2788 210 95.3 27

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

model # CLUHP-2-NG CLUHP-4-NG CLUHP-6-NG

list 1633 2332 3384

235


COOKING & WARMING EQUIPMENT Catalog Section 35

REDHOTS® Chef’s Line® Hot Plates - Electric see spec sheet

EG35.20

NOTE: INTENDED FOR OTHER THAN HOUSEHOLD USE. THIS COMMERCIAL APPLIANCE MUST BE INSTALLED WITHIN SURROUNDINGS AND VENTILATION REQUIREMENTS AS DICTATED BY NATIONAL AND/OR LOCAL CODE.

Bullnosed edge provides solid protection to controls.

FEATURES:

• Top and front are constructed of highly polished stainless steel. • Exterior wrapper is aluminized steel. • Swing-up elements with individual crumb trays, removable for easy cleaning. • 13˝ (330mm) working height adjustable to 14˝ (356mm). • Infinite controls provide adjustable heat setting and are equipped with an Off-On light. • All units are 60 cycle single phase. • Models #CLC-240-2 and CLC-208-2 are field-wired. #CLCW-120-2 comes complete with cord and 120-volt 15-amp NEMA 5-15 plug. Freight class is 92.5. (•) MTS (made to stock) / ( ) MTO (made to order)

width x depth* in. mm 18˝ x 279⁄16˝ 18˝ x 279⁄16˝ 18˝ x 279⁄16˝

457 x 700 457 x 700 457 x 700

weight lbs. kg

cu ft volts amps

40 40 40

7 7 7

18.1 18.1 18.1

120V 208V 240V

13.6A 15.2A 17.5A

electrical data watts watts (front burner) (rear burner) 1100W 1575W 2100W

525W 1575W 2100W

model # CLCW-120-2 CLC-208-2 • CLC-240-2

list 1374 1374 1374

* Depth dimension does not include 2˝ (51mm) junction box on models CLC-208-2 and CLC-240-2.

REDHOTS® Chef’s Line® Griddles - Gas see spec sheet

EG35.18

NOTE: INTENDED FOR OTHER THAN HOUSEHOLD USE. THIS COMMERCIAL APPLIANCE MUST BE INSTALLED WITHIN SURROUNDINGS AND VENTILATION REQUIREMENTS AS DICTATED BY NATIONAL AND/OR LOCAL CODE.

Bullnosed edge provides solid protection to controls.

FEATURES: 31⁄2˝ (89mm) wide front trough, with chute located at left end, accommodates standard spatula.

width in. mm

weight lbs. kg

24˝ 36˝ 48˝

173 240 318

610 914 1219

Freight class is 92.5. (•) MTS (made to stock) / ( ) MTO (made to order)

BTU cubic cooking rating feet surface

78.5 62,500 108.9 94,000 144.2 125,000

• Natural gas complete with convertible pressure regulator and orifices for field conversion to liquid propane. • 1⁄2˝ (13mm) NPT gas connection. • 31,250 BTU burner every 12˝ (305mm) for even heat distribution. • Water column pressure: 31⁄2˝ for NG, 91⁄2˝ for LP. • Front-to-back dimension, including flue riser, is 257⁄8˝ (657mm). • Controls are at a 45˚ angle for ergonomic operation. • Heavy duty cast metal legs with flanged feet adjustable from 4˝ to 5˝ (102 to 127mm). • 3⁄4˝ (19mm) thick smooth polished steel griddle plate fully welded to top assembly. • 13˝ (330mm) working height adjustable to 14˝ (356mm). • 4˝ (102mm) sides and rear splash sloped front-to-back. • 71⁄2-quart polished stainless steel oversized grease drawer.

10 13 17

443 sq in 664 sq in 885 sq in

water* manual thermostatic thermostatic controls column controls controls with safety pilot pressure model # list model # list model # list 31⁄2˝ CLAGGH-24-NG • 1840 CLAGGHT-24-NG • 2933 CLAGGHTS-24-NG 3797 31⁄2˝ CLAGGH-36-NG • 2354 CLAGGHT-36-NG • 3703 CLAGGHTS-36-NG 4788 31⁄2˝ CLAGGH-48-NG • 3174 CLAGGHT-48-NG • 4796 CLAGGHTS-48-NG 6031

* 31⁄2˝ water column pressure for natural gas (“NG”) units, 91⁄2˝ for liquid propane (“LP”) units.

236

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


COOKING & WARMING EQUIPMENT Catalog Section 35

REDHOTS® Chef’s Line® Griddles - Electric see spec sheet

EG35.18

NOTE: INTENDED FOR OTHER THAN HOUSEHOLD USE. THIS COMMERCIAL APPLIANCE MUST BE INSTALLED WITHIN SURROUNDINGS AND VENTILATION REQUIREMENTS AS DICTATED BY NATIONAL AND/OR LOCAL CODE.

Front-to-back dimension including junction box, is 26 3⁄4˝ (680mm).

Bullnosed edge provides solid protection to controls.

FEATURES:

• Thermostatic controls, adjustable from 100˚ to 450˚F. • 4000-watt tubular heating elements are secured to underside of griddle plate to provide uniform distribution of heat over entire griddle surface. • Internal wiring terminated in a junction box at rear for field wiring. • Controls are at a 45˚ angle for ergonomic operation. • 31⁄2˝ (89mm) wide front trough, with chute located at left end, accommodates standard spatula. • Heavy duty cast metal legs with flanged feet adjustable from 4˝ to 5˝ (102 to 127mm). • 3⁄4˝ (19mm) thick smooth polished steel griddle plate fully welded to top assembly. • 13˝ (330mm) working height adjustable to 14˝ (356mm). • 4˝ (102mm) sides and rear splash sloped front-to-back. • 71⁄2-quart polished stainless steel grease drawer. Freight class is 65.0. (•) MTS (made to stock) / ( ) MTO (made to order)

width in. mm

weight cubic lbs. kg feet

cooking surface

electrical data*

24˝ 36˝ 48˝

175 246 327

443 sq in 664 sq in 885 sq in

208V/240V, 28.9A/33.3A, 6000W/8000W 208V/240V, 43.3A/50.0A, 9000W/12000W 208V/240V, 57.8A/66.7A, 12000W/16000W

610 914 1219

79.4 111.6 148.3

10 13 17

model # CLEGH-24-240 • CLEGH-36-240 • CLEGH-48-240 •

list 2455 3101 4318

* Electrical data is based on single phase connection.

REDHOTS® Chef’s Line® Fryers - Single see spec sheet

EG35.19

NOTE: INTENDED FOR OTHER THAN HOUSEHOLD USE. THIS COMMERCIAL APPLIANCE MUST BE INSTALLED WITHIN SURROUNDINGS AND VENTILATION REQUIREMENTS AS DICTATED BY NATIONAL AND/OR LOCAL CODE.

optional night cover available. Model #361993. List: $125.

FEATURES:

Two fry baskets, nickel-plated, each 4˝ x 11˝ (102 x 279mm) heavy-plated mesh construction.

• Line cord included. CLEF10-120 furnished with NEMA 5-15 plug. CLEF10-240 furnished with NEMA 6-30 plug and cord for 208- or 240-volt application. • Fry tanks are 10˝ x 14˝ (254 x 356mm) and are allstainless steel deep-drawn one-piece construction, removable for easy cleaning or filtering of fat. • Snap action thermostat complete with indicator light for accurate temperature control. • Hi limit safety control provides total system shutdown in case of malfunction, and comes complete with reset button and indicator light. • Heating elements are self-cleaning Incoloy® sheath for long life and high performance. • 13˝ to 14˝ (330 to 356mm) working height, 183⁄4˝ (476mm) total height, and 60 cycle single phase.

WEIGHT CAPACITY: • 15 lb. (6.8kg) Freight class is 92.5.

* Based on single-phase 60-cycle electricity. Triple-phase also available. ** Double the performance for pre-cooked convenience foods. Preheat to 350°F for 41⁄2 minutes. Fryer performance is limited by the maximum available voltage in line. *** 240-volt models can be used for 208V or 240V operation.

width x depth in. mm 163⁄4˝ x 241⁄8˝ 163⁄4˝ x 241⁄8˝

426 x 613 426 x 613

weight lbs. kg 31 31

14.1 14.1

cu ft

(•) MTS (made to stock) / ( ) MTO (made to order)

**performance— french fries, raw-to-finish model # 6 120V, 15A, 1800W 120V: 6 lbs. (2.7 kg)/hr CLEF10-120 • 6 208/240V, 19.8/22.9A, 208V: 20 lbs. (9.1 kg)/hr CLEF10-240 *** • electrical data*

4200/5500W

list 1719 2045

240V: 30 lbs. (13.6 kg)/hr

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

237


COOKING & WARMING EQUIPMENT Catalog Section 35

REDHOTS® Chef’s Line® Fryers - Double see spec sheet

EG35.19

NOTE: INTENDED FOR OTHER THAN HOUSEHOLD USE. THIS COMMERCIAL APPLIANCE MUST BE INSTALLED WITHIN SURROUNDINGS AND VENTILATION REQUIREMENTS AS DICTATED BY NATIONAL AND/OR LOCAL CODE.

• • • •

• • Optional night cover available. Two needed for double-tank unit. Model #361993. List: $125 each.

• •

FEATURES:

Four fry baskets, nickel-plated, each 4˝ x 11˝ (102 x 279mm) heavy-plated mesh construction.

WEIGHT CAPACITY:

Dual voltage: 208V and 240V. Designed for direct field wiring. Equipped with junction box for field wiring. Fry tanks are 10˝ x 14˝ (254 x 356mm) and are all-stainless steel deep-drawn one-piece construction, removable for easy cleaning or filtering of fat. Snap action thermostat complete with indicator light for accurate temperature control. Hi limit safety control provides total system shutdown in case of malfunction, and comes complete with reset button and indicator light. Heating elements are self-cleaning Incoloy® sheath for long life and high performance. 13˝ to 14˝ (330 to 356mm) working height, 183⁄4˝ (476mm) total height, and 60 cycle single phase.

• 30 lb. (13.6kg) Freight class is 92.5.

* Based on single-phase 60-cycle electricity. Three-phase also available. ** Double the performance for pre-cooked convenience foods. Preheat to 350°F for 41⁄2 minutes. Fryer performance is limited by the maximum available voltage in line. *** 240-volt models can be used for 208V or 240V operation.

width x depth in. mm 32˝ x 241⁄8˝

813 x 613

weight lbs. kg 61

27.7

cu ft

**performance— french fries, raw-to-finish model # 12 208/240V, 39.6/45.8A, 208V: 40 lbs. (18.1 kg)/hr CLEF102-240 *** • electrical data* 8400/11000W

see spec sheet

EG35.02

FEATURES: BW-2-120 bulb warmer

141⁄4˝ x 191⁄4˝ 362 x 489 10 141⁄4˝ x 191⁄4˝ 362 x 489 18 *Dimensions of bottom plate.

• Freestanding portable food warmers. • Adjustable frame of heavy gauge steel with chrome finish, ensuring lasting beauty and durability. • Two 250-watt infrared white bulbs, a 6´(1829mm) 3-conductor cord fitting all standard 15-amp wall receptacles. • 8˝ (203 mm) high lamp shields constructed of polished aluminum, and chrome-plated bottom plate. • The BW-2-120I comes with 20˝ x 12˝ x 21⁄2˝ (508 x 305 x 64mm) stainless steel pan and drain insert. • Height adjusts from 195⁄8˝ to 275⁄8˝ (499 to 702mm). • 60 cycle single phase. Freight class is 92.5.

BW-2-120I bulb warmer

weight lbs. kg 4.5 8.2

list 3705

240V: 60 lbs. (27.2 kg)/hr

REDHOTS® Bulb Warmers

width x depth* in. mm

(•) MTS (made to stock) / ( ) MTO (made to order)

(•) MTS (made to stock) / ( ) MTO (made to order)

cu ft

electrical data*

3.6 3.6

120V, 4.2A, 500W 120V, 4.2A, 500W

model # BW-2-120 • BW-2-120I •

list 443 536

Accessories/Replacements for Bulb Warmers description 203⁄4˝ x 123⁄4˝ x 21⁄2˝ (527 x 324 x 64mm) pan stainless steel drain insert red infrared bulb white infrared bulb white infrared shatter-proof Teflon-coated bulb

238

model # 301669 301757 301759 301628 360332

list 73 68 80 36 48

pan with drain insert

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


COOKING & WARMING EQUIPMENT Catalog Section 35

REDHOTS® Heat Lamps

Freight class is 92.5.

see product announcement

(•) MTS (made to stock) / ( ) MTO (made to order)

EG35.23

• If 120V or 208V is desired, replace “-240” in model number with “-120” or “-208” (ex: RHHL-30-120).

Standard- and High-Watt Units

NOTE: 18˝ to 108˝ long units available in 120V, 208V, or 240V voltage. 120˝ to 144˝ long units available in 208V or 240V only.

length STANDARD WATT, NO LIGHTS STANDARD WATT, WITH LIGHTS in. mm voltage wattage model # list wattage* model # list 18˝ 457 240V 250W RHHL-18-240 268 310W RHHL-18-240-L 412 24˝ 610 240V 350W RHHL-24-240 286 470W RHHL-24-240-L 426 30˝ 762 240V 450W RHHL-30-240 303 570W RHHL-30-240-L 482 36˝ 914 240V 575W RHHL-36-240 323 755W RHHL-36-240-L 538 42˝ 1067 240V 675W RHHL-42-240 339 855W RHHL-42-240-L 589 48˝ 1219 240V 800W RHHL-48-240 358 1040W RHHL-48-240-L 643 54˝ 1372 240V 925W RHHL-54-240 375 1165W RHHL-54-240-L 696 60˝ 1524 240V 1050W RHHL-60-240 413 1350W RHHL-60-240-L 771 66˝ 1676 240V 1160W RHHL-66-240 447 1460W RHHL-66-240-L 841 72˝ 1829 240V 1275W RHHL-72-240 511 1635W RHHL-72-240-L 938 84˝ 2134 240V 1500W RHHL-84-240 593 1920W RHHL-84-240-L 1091 96˝ 2438 240V 1725W RHHL-96-240 661 2205W RHHL-96-240-L 1231 108˝ 2743 240V 1850W RHHL-108-240 804 2330W RHHL-108-240-L 1446 120˝ 3048 240V 2100W RHHL-120-240 878 2640W RHHL-120-240-L 1591 132˝ 3353 240V 2320W RHHL-132-240 948 2920W RHHL-132-240-L 1732 144˝ 3658 240V 2550W RHHL-144-240 1019 3210W RHHL-144-240-L 1876

HIGH WATT, NO LIGHTS HIGH WATT, WITH LIGHTS wattage model # list wattage* model # list 350W RHHL-18-240-H 276 410W RHHL-18-240-H-L 420 500W RHHL-24-240-H 295 620W RHHL-24-240-H-L 438 660W RHHL-30-240-H 313 780W RHHL-30-240-H-L 492 862.5W RHHL-36-240-H 332 1042.5W RHHL-36-240-H-L 545 1025W RHHL-42-240-H 351 1205W RHHL-42-240-H-L 599 1200W RHHL-48-240-H 366 1440W RHHL-48-240-H-L 652 1250W RHHL-54-240-H 383 1490W RHHL-54-240-H-L 706 1400W RHHL-60-240-H 421 1700W RHHL-60-240-H-L 777 1560W RHHL-66-240-H 456 1860W RHHL-66-240-H-L 847 1725W RHHL-72-240-H 519 2085W RHHL-72-240-H-L 946 2050W RHHL-84-240-H 599 2470W RHHL-84-240-H-L 1100 2400W RHHL-96-240-H 673 2880W RHHL-96-240-H-L 1242 2500W RHHL-108-240-H 815 2980W RHHL-108-240-H-L 1456 2800W RHHL-120-240-H 885 3340W RHHL-120-240-H-L 1598 3120W RHHL-132-240-H 959 3720W RHHL-132-240-H-L 1742 3450W RHHL-144-240-H 1029 4110W RHHL-144-240-H-L 1883

Standard- and High-Watt Units with Remote - When ordering, please specify toggle or infinite switch (see chart at bottom of page). length STANDARD WATT, NO LIGHTS STANDARD WATT, WITH LIGHTS in. mm voltage wattage model # list wattage* model # list 18˝ 457 240V 250W RHHL-18-240-R 632 310W RHHL-18-240-L-R 775 24˝ 610 240V 350W RHHL-24-240-R 649 470W RHHL-24-240-L-R 789 30˝ 762 240V 450W RHHL-30-240-R 666 570W RHHL-30-240-L-R 845 36˝ 914 240V 575W RHHL-36-240-R 686 755W RHHL-36-240-L-R 901 42˝ 1067 240V 675W RHHL-42-240-R 702 855W RHHL-42-240-L-R 953 48˝ 1219 240V 800W RHHL-48-240-R 721 1040W RHHL-48-240-L-R 1006 54˝ 1372 240V 925W RHHL-54-240-R 738 1165W RHHL-54-240-L-R 1059 60˝ 1524 240V 1050W RHHL-60-240-R 776 1350W RHHL-60-240-L-R 1134 66˝ 1676 240V 1160W RHHL-66-240-R 811 1460W RHHL-66-240-L-R 1204 72˝ 1829 240V 1275W RHHL-72-240-R 874 1635W RHHL-72-240-L-R 1301 84˝ 2134 240V 1500W RHHL-84-240-R 956 1920W RHHL-84-240-L-R 1454 96˝ 2438 240V 1725W RHHL-96-240-R 1024 2205W RHHL-96-240-L-R 1594 108˝ 2743 240V 1850W RHHL-108-240-R 1167 2330W RHHL-108-240-L-R 1809 120˝ 3048 240V 2100W RHHL-120-240-R 1241 2640W RHHL-120-240-L-R 1954 132˝ 3353 240V 2320W RHHL-132-240-R 1312 2920W RHHL-132-240-L-R 2095 144˝ 3658 240V 2550W RHHL-144-240-R 1382 3210W RHHL-144-240-L-R 2239

HIGH WATT, NO LIGHTS HIGH WATT, WITH LIGHTS wattage model # list wattage* model # list 350W RHHL-18-240-H-R 639 410W RHHL-18-240-H-L-R 783 500W RHHL-24-240-H-R 658 620W RHHL-24-240-H-L-R 801 660W RHHL-30-240-H-R 676 780W RHHL-30-240-H-L-R 855 862.5W RHHL-36-240-H-R 695 1042.5W RHHL-36-240-H-L-R 908 1025W RHHL-42-240-H-R 714 1205W RHHL-42-240-H-L-R 962 1200W RHHL-48-240-H-R 729 1440W RHHL-48-240-H-L-R 1015 1250W RHHL-54-240-H-R 746 1490W RHHL-54-240-H-L-R 1069 1400W RHHL-60-240-H-R 784 1700W RHHL-60-240-H-L-R 1140 1560W RHHL-66-240-H-R 819 1860W RHHL-66-240-H-L-R 1211 1725W RHHL-72-240-H-R 882 2085W RHHL-72-240-H-L-R 1309 2050W RHHL-84-240-H-R 962 2470W RHHL-84-240-H-L-R 1463 2400W RHHL-96-240-H-R 1036 2880W RHHL-96-240-H-L-R 1605 2500W RHHL-108-240-H-R 1178 2980W RHHL-108-240-H-L-R 1819 2800W RHHL-120-240-H-R 1248 3340W RHHL-120-240-H-L-R 1961 3120W RHHL-132-240-H-R 1322 3720W RHHL-132-240-H-L-R 2105 3450W RHHL-144-240-H-R 1393 4110W RHHL-144-240-H-L-R 2246

* Wattage listed includes output of the lights.

Switches for Heat Lamps with Remote applicable heat lamps toggle switch

infinite switch

standard-watt units without lights (heat lamp model #s with suffix “-R”) standard-watt units with lights (heat lamp model #s with suffix “-L-R”) high-watt units without lights (heat lamp model #s with suffix “-H-R”) high-watt units with lights (heat lamp model #s with suffix “-H-L-R”)

heat lamp lengths* in. mm 18˝ - 96˝ 108˝-144˝ 18˝ - 96˝ 108˝-144˝ 18˝ - 60˝ 66˝ - 144˝ 18˝ - 60˝ 66˝ - 144˝

457 - 2438 2743 - 3658 457 - 2438 2743 - 3658 457 - 1524 1676 - 3658 457 - 1524 1676 - 3658

TOGGLE SWITCHES FOR 120V*, 208V, and 240V HEAT LAMPS model # 410301 410303 410308 410306 410301 410303 410308 410306

INFINITE SWITCHES FOR 120V * FOR 208V FOR 240V HEAT LAMPS HEAT LAMPS HEAT LAMPS model # model # model # 411182 411172 410302 411184 411174 410304 411185 411175 410305 411187 411177 410307 411182 411172 410302 411184 411174 410304 411185 411175 410305 411187 411177 410307

* 120-volt heat lamps available up to 108˝-length. 100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

239


COOKING & WARMING EQUIPMENT Catalog Section 35 • Exterior extruded aluminum housing with mirror finish reflector for maximum brightness. • Designed for field wiring. • Lighted rocker switch. • Can be chain-mounted from ceiling or mounted under a shelf.

REDHOTS® Display Lights see product announcement

EG8171

FEATURES:

Note:

For Display Lights with cord/plug, add $100 to list cost of non-cp units and add suffix “-CP” to model number. Example RHDL-30-I-CP.

Freight class is 92.5.

Built-In Switch

Remote Switch

WITH WITH length INCANDESCENT LIGHTS INCANDESCENT LIGHTS in. mm voltage wattage model # list wattage model # list 18˝ 457 120V 60W RHDL-18-I 357 60W RHDL-18-I-R 377 24˝ 610 120V 120W RHDL-24-I 377 120W RHDL-24-I-R 397 30˝ 762 120V 120W RHDL-30-I 394 120W RHDL-30-I-R 414 36˝ 914 120V 180W RHDL-36-I 457 180W RHDL-36-I-R 476 42˝ 1067 120V 180W RHDL-42-I 475 180W RHDL-42-I-R 494 48˝ 1219 120V 240W RHDL-48-I 534 240W RHDL-48-I-R 552 54˝ 1372 120V 240W RHDL-54-I 551 240W RHDL-54-I-R 569 60˝ 1524 120V 300W RHDL-60-I 613 300W RHDL-60-I-R 633 66˝ 1676 120V 300W RHDL-66-I 633 300W RHDL-66-I-R 652 72˝ 1829 120V 360W RHDL-72-I 693 360W RHDL-72-I-R 712

REDHOTS® Countertop Food Warmers see spec sheet

EG35.00 FEATURES:

(•) MTS (made to stock) / ( ) MTO (made to order)

Ideal for lighting up food prep, holding, and display areas.

• Infinite controls. • Highly polished stainless steel exterior ensures lasting beauty and durability. Freight class is 92.5.

model #1220FWD-120 shown with optional food pan

model #11QFW-120 “soup warmer”

Meets the highest standards of construction.

(•) MTS (made to stock) / ( ) MTO (made to order)

12˝ x 20˝ (305 x 508mm) Opening • Deep drawn type 304 stainless steel 12˝ x 20˝ (305 x 508mm) openings, providing wet or dry operation. 11˝ (279mm) height. width x depth in. mm

weight cu # of 120-VOLT MODELS 208-VOLT MODELS lbs. kg ft openings electrical data model # list electrical data model # 141⁄4˝ x 221⁄8˝ 362 x 562 24 10.9 3.4 1 120V, 6.3A, 750W 1220FWE-120 • 561 208V, 3.6A, 750W 1220FWE-208 141⁄4˝ x 221⁄8˝ 362 x 562 24 10.9 3.4 1 120V, 10A, 1200W 1220FWD-120• 564 208V, 5.8A, 1200W 1220FWD-208 293⁄16˝ x 229⁄16˝ 741 x 573 54 24.5 9.9 2 120V, 15A, 1800W 1220FW2-120 1287 208V, 9.1A, 1900W 1220FW2-208

240-VOLT MODELS list electrical data model # list 561 240V, 3.1A, 750W 1220FWE-240 561 564 240V, 5.0A, 1200W 1220FWD-240 564 1287 240V, 7.9A, 1900W 1220FW2-240 1287

Round Inset • Also known as “soup warmers”. Round well holds 7 qts. (6.6 liters) or 11 qts. (10.4 liters) round inset. 103⁄4˝ (273mm) height. To order round inset, see page 248. width x depth in. mm 12˝ x 12˝ 143⁄4˝ x 163⁄4˝

240

305 x 305 375 x 426

weight lbs. kg 18 20

cu ft

120-VOLT MODELS electrical data model # 8.2 1.3 120V, 4.2A, 550W 7QFW-120 • 9.0 3.4 120V, 4.2A, 550W 11QFW-120 •

208-VOLT MODELS list electrical data model # 635 208V, 2.4A, 500W 7QFW-208 693 208V, 2.4A, 500W 11QFW-208

240-VOLT MODELS list electrical data model # 635 240V, 2.8A, 660W 7QFW-240 693 240V, 2.8A, 660W 11QFW-240

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

list 635 693


COOKING & WARMING EQUIPMENT Catalog Section 35

REDHOTS® Countertop Cooker/Warmers see spec sheet

EG35.01

FEATURES:

• Exterior body is stainless steel. • Thermostatically controlled and offers a degree range setting from 100° to 450°F in 50° increments. • Degree range is 100° to 212° with wet usage, 100° to 450°F with dry usage. Freight class is 92.5. (•) MTS (made to stock) / ( ) MTO (made to order)

model #1220CWD-120 with optional food pan

model #11QCW-120 with optional inset

Among the most versatile of countertop equipment. Capable of cooking, warming or serving.

12˝ x 20˝ (305 x 508mm) Opening • Deep drawn type 304 stainless steel 12˝ x 20˝ (305 x 508mm) openings, providing wet or dry operation. 11˝ (279mm) height. width x depth in. mm

weight lbs. kg

141⁄4˝ x 221⁄8˝ 362 x 562 26

cu ft

120-VOLT MODELS 208-VOLT MODELS electrical data model # list electrical data model # 11.8 3.4 120V, 10A, 1200W 1220CWD-120 • 742 208V, 5.8A, 1200W 1220CWD-208

240-VOLT MODELS list electrical data model # list 742 240V, 5A, 1200W 1220CWD-240 742

Round Inset • These units hold one 11 qt. (10.4 liter) round inset. 121⁄2˝ (318mm) height. To order round inset, see page 248. width x depth in. mm

weight lbs. kg

143⁄4˝ x 1611⁄16˝ 372 x 424 20

cu ft

120-VOLT MODELS electrical data model # 9.0 3.4 120V, 6.3A, 750W 11QCW-120 •

208-VOLT MODELS list electrical data model # 772 208V, 2.7A, 562W 11QCW-208

240-VOLT MODELS list electrical data model # 772 240V, 3.1A, 750W 11QCW-240

list 772

All specifications are subject to change without notice. New York M.E.A. No. 376-84-E Note:

Accessories for REDHOTS® Food Warmers & Cooker/Warmers see spec sheets EG35.00

For additional accessories, including round insets and lids, see page 248.

Freight class is 85.0. EG35.01

(•) MTS (made to stock) / ( ) MTO (made to order)

Adapter Tops description two 81⁄2˝ (216mm) diameter inserts, each for 7 qts. (6.6 liters) one 81⁄2˝ (216mm) diameter insert for 7 qts (6.6 liters), and one 101⁄2˝ (267mm) diameter insert for 11 qts. (10.4 liters) one 61⁄2˝ (165mm) diameter insert for 4 qts (3.8 liters), and one 101⁄2˝ (267mm) diameter insert for 11 qts. (10.4 liters) one 61⁄2˝ (165mm) diameter insert for 4 qts (3.8 liters), and one 81⁄2˝ (216mm) diameter insert for 7 qts (6.6 liters) three 61⁄2˝ (165mm) diameter inserts, each for 4 qts (3.8 liters)

model # 501600 • 501912 •

list 113 113

501913

113

501915

113

501914 •

113

Pass-Thru Heated Drawers see product announcement

EG8141

front of unit shown with drawer in the closed position

electrical data 120V, 3.75A, 450W 240V, 1.88A, 450W

Left Hand Cord Right Hand Cord model # list model# list DWP-1L-120 3153 DWP-1R-120 3153 DWP-1L-240 3153 DWP-1R-240 3153

FEATURES:

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

model #501600 2-pot adapter top

model #501915 2-pot adapter top

model #501912 2-pot adapter top

model #501913 2-pot adapter top

model #501914 3-pot adapter top

• Handles and controls are provided on both sides of drawer for functionality from either side. • Heavy gauge stainless steel interior and exterior with 11⁄2˝ (38mm) fiberglass insulation. • Food-grade silicone rubber gaskets provide sealing around the drawer fronts to help boost efficiency. • Stainless steel liners that accept standard full-size and fractional steam table pans up to 6˝ (152mm) deep. • Standard black 4˝ (102mm) adjustable non-marking feet. Freight class is 100.0. (•) MTS (made to stock) / ( ) MTO (made to order)

241


COOKING & WARMING EQUIPMENT Catalog Section 35 • Fry tanks are 10˝ x 14˝ (254 x 356mm) and are all-stainless steel deep-drawn one-piece construction, see spec sheet EG35.03 removable for easy cleaning or filtering of fat. • Snap action thermostat comes complete with NOTE: INTENDED FOR OTHER THAN HOUSEHOLD USE. THIS COMMERCIAL indicator light for accurate temperature control. APPLIANCE MUST BE INSTALLED WITHIN SURROUNDINGS AND VENTILATION REQUIREMENTS AS DICTATED BY NATIONAL AND/OR LOCAL CODE. • Hi limit safety control provides total system shutdown in case of malfunction and comes complete with reset button and indicator light. • Heating elements are self-cleaning Incoloy® for long life and high performance. • Body construction features highly polished stainless steel. • All units are 105⁄8˝ (270mm) working height, 153⁄8˝ (391mm) total height, and 60 cycle single phase. FEATURES:

REDHOTS® Electric Fryers

single tank electric fryer

Freight class is 85.0.

double tank electric fryer

For information on griddle stands, refer to page 131.

(•) MTS (made to stock) / ( ) MTO (made to order)

Single Tank—15 lb. (6.8kg) capacity • Two fry baskets, each 4˝ x 11˝ (102 x 279mm) heavy-plated mesh construction. • Line cord included. EF10-120 furnished with NEMA 5-15 plug. EF10-240 furnished with NEMA 6-30 plug and cord for 208- or 240-volt application. in.

width x depth mm

12˝ x 191⁄4˝ 12˝ x 191⁄4˝

305 x 489 305 x 489

weight cu lbs. kg ft 31 31

14.1 14.1

4.0 4.0

electrical data

*performance— french fries, raw-to-finish

120V, 15A, 1800W 208/240V, 19.8/22.9A, 4200/5500W

120V: 6 lbs. (2.7 kg)/hr 208V: 20 lbs. (9.1 kg)/hr 240V: 30 lbs. (13.6 kg)/hr

model # EF10-120 • EF10-240 •

list 1342 1566

model # EF102-240 •

list 3333

Double Tank—30 lb. (13.6kg) capacity • Dual voltage: 208V and 240V. • Designed for direct field wiring. • Four fry baskets, each 4˝ x 11˝ (102 x 279mm) heavy-plated mesh construction. width x depth in. mm 25˝ x 191⁄4˝

635 x 489

weight cu lbs. kg ft 61

27.7

8.0

electrical data

*performance— french fries, raw-to-finish

208/240V, 39.6/45.8A, 8400/11000W

208V: 40 lbs. (18.1 kg)/hr 240V: 60 lbs. (27.2 kg)/hr

* Double the performance for pre-cooked convenience foods. Preheat to 350°F for 41⁄2 minutes. Fryer performance is limited by the maximum available voltage in line. All specifications are subject to change without notice. New York M.E.A. No. 449-84-E

Accessories/Replacements for Electric Fryers description replacement basket, left side, for single-tank fryers only replacement basket, right side, for single-tank fryers only 21⁄4˝ (57mm) high legs, set of four double-fry basket, 81⁄4˝ x 91⁄4˝ x 4˝ (210 x 235 x 102mm) divider for double-tank fryer night cover (two required for double tank model)

model # 307543 307546 309197 309781 340859 361673

list 80 80 33 105 52 63 optional double fry basket

242

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


COOKING & WARMING EQUIPMENT Catalog Section 35

REDHOTS® Heated Drawers see spec sheets EG35.15

EG35.16

1-tier freestanding unit

2-tier built-in unit

FEATURES:

• Freestanding styles feature 72˝ (1829mm) three wire grounded cord. • Built-in styles feature 4´(1219mm) flexible conduit for field termination to a junction box. • Heavy duty stainless steel construction with 11⁄2˝ (38mm) fiberglass insulation. • Drawer liners are 12˝ (305mm) front-to-back, 20˝ (508mm) side-to-side, and 61⁄2˝ (165mm) deep. • Individual recessed thermostat control and indicator lamp for each drawer. • Heating element configuration heats quickly and evenly from 100˚ to 200˚F. • Adjustable louvers on each drawer retain ideal product moisture levels. • Drawers are interchangeable and include stainless steel liners that accept standard full-size and fractional steam table pans up to 6˝ (152mm) deep. • 4˝ (102mm) adjustable non-marking feet. Note:

Ideal for crisp or moist foods.

Perforated well pan bottom available. For use if water was to be in the bottom and buns or rolls on top. Fits inside stainless steel spillage pan insert. One per drawer as required. Model #: DW-PERF. List price: $58 4˝ (102mm) diameter casters available for freestanding models. Set of four. Model #: DW-C4. List price: $254

3-tier freestanding unit with optional casters

Replacement drawer liner available for all models. Model #: 331160. List price: $168

Freight class is 92.5.

New York M.E.A. No. 246-02-E

(•) MTS (made to stock) / ( ) MTO (made to order)

1-Drawer Units electrical data 120V, 3.75A, 450W 240V, 1.88A, 450W

Narrow Width FREESTANDING * BUILT-IN** model # list model # list DWN-1-120 2694 DWN-1BI-120 2694 DWN-1-240 2694 DWN-1BI-240 2694

Wide Width FREESTANDING*** model # list DWW-1-120 2694 DWW-1-240 2694

BUILT-IN**** model # list DWW-1BI-120 2694 DWW-1BI-240 2694

* 21˝ W x 273⁄4˝ D x 161⁄4˝ H (533 x 705 x 413mm) overall dimensions *** 29˝ W x 231⁄4˝ D x 161⁄4˝ H (737 x 591 x 413mm) overall dimensions ** 213⁄4˝ W x 265⁄8˝ D x 107⁄8˝ H (553 x 676 x 276mm) cutout dimensions **** 293⁄4˝ W x 233⁄8˝ D x 107⁄8˝ H (756 x 606 x 276mm) cutout dimensions

2-Drawer Units electrical data 120V, 7.5A, 900W 240V, 3.75A, 900W

Narrow Width FREESTANDING * BUILT-IN** model # list model # list DWN-2-120 4394 DWN-2BI-120 4394 DWN-2-240 4394 DWN-2BI-240 4394

Wide Width FREESTANDING*** model # list DWW-2-120 • 4394 DWW-2-240 4394

BUILT-IN**** model # list DWW-2BI-120 4394 DWW-2BI-240 4174

* 21˝ W x 273⁄4˝ D x 265⁄8˝ H (533 x 705 x 676mm) overall dimensions *** 29˝ W x 231⁄4˝ D x 265⁄8˝ H (737 x 591 x 676mm) overall dimensions ** 213⁄4˝ W x 265⁄8˝ D x 213⁄4˝ H (553 x 676 x 553mm) cutout dimensions **** 293⁄4˝ W x 233⁄8˝ D x 213⁄4˝ H (756 x 606 x 553mm) cutout dimensions

3-Drawer Units electrical data 120V, 11.25A, 1350W 240V, 5.63A, 1350W

Narrow Width FREESTANDING * BUILT-IN** model # list model # list DWN-3-120 5962 DWN-3BI-120 5962 DWN-3-240 5962 DWN-3BI-240 5962

Wide Width FREESTANDING*** model # list DWW-3-120 5962 DWW-3-240 5962

BUILT-IN**** model # list DWW-3BI-120 5962 DWW-3BI-240 5962

*21˝ W x 273⁄4˝ D x 37˝ H (533 x 705 x 940mm) overall dimensions *** 29˝ W x 231⁄4˝ D x 37˝ H (737 x 591 x 940mm) overall dimensions ** 213⁄4˝ W x 265⁄8˝ D x 325⁄8˝ H (553 x 676 x 829mm) cutout dimensions **** 293⁄4˝ W x 233⁄8˝ D x 325⁄8˝ H (756 x 606 x 829mm) cutout dimensions 100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

243


COOKING & WARMING EQUIPMENT Catalog Section 35

Sealed Well Hot Food Gang Drop-In Units see spec sheet

EG35.12

Designed for installation into a counter fixture. Note:

240V units shown as “240T6” (example: SGDI-1-240T6) can be run at 208V operation. This will reduce available amperage and wattage by 25%. AutoFill®* automatic water fill system available for models with drain. NSFand UL-approved. To order, add $846 to list price and replace prefix “SGDI” in model number with prefix “SGDIA”. Example: SGDIA-2-240T-D

FEATURES:

• Completely wired and ready for installation. • Well openings accommodate 12˝ x 20˝ (308 x 508mm) pans up to 6˝ (152mm) deep. • Wet or dry operation. • Wired for single-phase operation, and can easily be converted for three-phase operation in the field. • Top constructed of heavy-gauge 300 series stainless steel. • The body is enclosed with galvanized steel and surrounded on 5 sides by 2˝ (51mm) of fiberglass insulation. • The bottom is easily removed for servicing. • All units are supplied with a front-mounted control panel. • Individual thermostatic control with a positive “Off” position and an amber light to signal a power-on condition. • Control knobs are recessed into a one-piece, frontmounted control panel. • The flexible conduit connecting the body enclosure and control panel is 24˝ (610mm) on all models except onewell units, which have a 36˝ (914mm) flexible conduit. • A terminal-block for field wiring connections is provided on all except one-well units. • Units ordered with drains are connected by 3⁄4˝ (19mm) diameter copper pipe and fittings to a single ball valve. • Units with multiple wells are designed so the valve can be mounted to the operator’s left or right with the drains closest to the operator. • Valve is shipped loose, to be field-installed. Freight class is 92.5. (•) MTS (made to stock) / ( ) MTO (made to order)

no. wells

width x depth in. mm

weight lbs. kg

cu ft

cutout dimensions* for control panels in. mm

cutout dimensions for drop-in unit in. mm

electrical data**

without drain model # list SGDI-1-120T 2135 SGDI-1-240T 2135 SGDI-1-240T6 2140 SGDI-2-120T 2894 SGDI-2-240T 2894 SGDI-2-240T6 2903 SGDI-3-120T 3542 SGDI-3-240T 3542 SGDI-3-240T6 3555 SGDI-4-240T 4228 SGDI-4-240T6 4246 SGDI-5-240T 4892 SGDI-5-240T6 4914 SGDI-6-240T 5493 SGDI-6-240T6 5511

with drain*** model # list SGDI-1-120T-D 2374 SGDI-1-240T-D 2374 SGDI-1-240T6-D 2379 SGDI-2-120T-D* 3308 SGDI-2-240T-D* 3308 SGDI-2-240T6-D* 3318 SGDI-3-120T-D* 4071 SGDI-3-240T-D* 4071 SGDI-3-240T6-D* 4331 SGDI-4-240T-D 4833 SGDI-4-240T6-D 4852 SGDI-5-240T-D 5611 SGDI-5-240T6-D 5952 SGDI-6-240T-D 6307 SGDI-6-240T6-D 6334

120V, 1200W, 10.0A 240V, 1200W, 5.0A 240V, 1600W, 6.7A 120V, 2400W, 20.0A 2 32˝ x 26˝ 813 x 660 51 23.1 6.0 5˝ x 17˝ * 127 x 432 303⁄8˝ x 233⁄8˝ 772 x 594 240V, 2400W, 10.0A 240V, 3200W, 13.3A 120V, 3600W, 30.0A 3 46˝ x 26˝ 1168 x 660 73 33.1 8.0 5˝ x 17˝ * 127 x 432 443⁄8˝ x 233⁄8˝ 1127 x 594 240V, 3600W, 15.0A 240V, 4800W, 20.0A 4 60˝ x 26˝ 1524 x 660 95 43.1 11.0 5˝ x 337⁄8˝ 127 x 860 577⁄8˝ x 233⁄8˝ 1470 x 594 240V, 4800W, 20.0A 240V, 6400W, 26.7A 5 74˝ x 26˝ 1880 x 660 105 47.6 13.5 5˝ x 337⁄8˝ 127 x 860 713⁄8˝ x 233⁄8˝ 1813 x 594 240V, 6000W, 25.0A 240V, 8000W, 33.4A 6 861⁄2˝ x 26˝ 2197 x 660 120 54.4 16.0 5˝ x 337⁄8˝ 127 x 860 853⁄8˝ x 233⁄8˝ 2169 x 594 240V, 7200W, 30.0A 240V, 9600W, 40.0A * For applicable 2-well and 3-well units (noted in chart) with optional AutoFill® system installed, cutout dimensions for control panel is 5˝ x 235⁄8˝ (127 x 600mm). AutoFill® is not available for 1-well units. For applicable 4-, 5-, and 6-well units, cutout dimensions for control panel remain as listed in chart. ** Total watts and total amperage indicated in electrical data. ***Plumbing available only on units with drain. 1

244

18˝ x 26˝ 457 x 660 21

9.5

3.0

5˝ x 8˝

127 x 203 163⁄8˝ x 233⁄8˝

416 x 594

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


COOKING & WARMING EQUIPMENT Catalog Section 35

Electric Hot Food Gang Drop-In Units see spec sheet

EG35.13

model # GDI-2-240

FEATURES:

• Top constructed of heavy-gauge stainless steel with 1˝ (25mm) overhang on all four sides with reinforced angles. • Infinite control offers high and low selections along with eight other temperature settings. • Each heat compartment accommodates a 12˝ x 20˝ (305 x 508mm) food pan and is furnished with a 750-watt exposed rectangular shaped heating element. • All wiring terminates within junction box. • Units are design for field wiring by others. Freight class is 92.5.

model # GDI-3-240 unit

(•) MTS (made to stock) / ( ) MTO (made to order)

# of pan # of openings panels 2 3 4 5

1 1 2 2

fits cutout measuring in. mm 235⁄16˝ x 303⁄4˝ 235⁄16˝ x 461⁄8˝ 235⁄16˝ x 611⁄2˝ 235⁄16˝ x 767⁄8˝

592 x 781 592 x 1172 592 x 1562 592 x 1953

type of remote control panel(s), and cutout dimensions double, 83⁄8˝ x 211⁄16˝ (213 x 68mm) triple, 1113⁄16˝ x 211⁄16˝ (300 x 68mm) double, 83⁄8˝ x 211⁄16˝ (213 x 68mm) double, 83⁄8˝ x 211⁄16˝ (213 x 68mm); & triple, 1113⁄16˝ x 211⁄16˝ (300 x 68mm)

electrical data 240V, 6.25A, 1500W, 240V, 9.38A, 2250W 240V, 12.5A, 3000W 240V, 15.6A, 3750W

model # GDI-2-240 GDI-3-240 GDI-4-240 GDI-5-240

list 1786 2135 2729 3073

NOTE: 240-volt units will not allow field wiring to 208 volts. 208-volt models available. To order, replace suffix “-240” with “-208”. Example: GDI-2-208

Drop-In Style Food Warmers - Round see spec sheet

EG35.10

Consult factory for pricing and availability of FEATURES: UL listed models

• Designed to accept either a 7-qt. (6.6 liter) or 11-qt. (10.4 liter) round inset. • One-piece deep-drawn 18-8 stainless steel. • Thermostatic or infinite control, indicator light and die stamped recessed control panel. • Heating element securely clamped to underside allowing for service through bottom. Freight class is 92.5. (•) MTS (made to stock) / ( ) MTO (made to order)

7-qt. (6.6 liters) drop-in style food warmer

7-qt. (6.6 liters) Capacity — Cutout diameter: 83⁄4˝ (222mm). diameter x height in. mm

weight lbs. kg

cu ft

electrical data

101⁄2˝ x 81⁄2˝

267 x 216

10

4.5

1.0

120V, 4.6A, 550W

101⁄2˝ x 81⁄2˝

267 x 216

10

4.5

1.0

208/240V, 2.4/2.8A, 500/660W

INFINITE model # 7QDI-120 7QDI-120D** 7QDI-240 7QDI-240D**

list 682 762 682 762

THERMOSTATIC* model # list 7QDI-120T 820 7QDI-120TD** 899 n/a n/a n/a n/a

weight lbs. kg

cu ft

electrical data

121⁄2˝ x 81⁄2˝ 318 x 216

14

6.4

1.4

120V, 4.6A, 550W

121⁄2˝ x 81⁄2˝ 318 x 216

14

6.4

1.4

208/240V, 2.4/2.8A, 500/660W

INFINITE model # 11QDI-120 11QDI-120D** 11QDI-240 11QDI-240D**

mounting plate

description

11-qt. (10.4 liters) Capacity — Cutout diameter: 103⁄4˝ (273mm). diameter x height in. mm

Mounting Plates for Laminated Plastic or Wood Countertops

list 711 773 711 773

THERMOSTATIC* model # list 11QDI-120T 847 11QDI-120TD** 912 n/a n/a n/a n/a

model # list 92 100

for 7-qt. (6.6 liters) 7QP for 11-qt. (10.4 liters) 11QP

*Thermostatic models available with 72˝ (1829mm) capillary. To order, add suffix “-72”. Example: 7QDI-120-72 ** Comes with drain. 100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

245


COOKING & WARMING EQUIPMENT Catalog Section 35 FEATURES: • Constructed of one piece deep-drawn 304 series 18-8 stainless steel with coved corners. • Heating element securely clamped to underside, allowing for service through bottom. • The insulated bottom mount hot food units feature exterior wrapper of galvanized steel fully insulated with dense fiberglass. 9˝ (229mm) height. • Models with suffix “-D” come with drain.

Drop-In Style Food Warmers Rectangular see spec sheet

top mount… cutout size: 121⁄2˝ x 201⁄2˝ (318 x 521mm)

…bottom mount… cutout size: 12˝ x 20˝ (305 x 508mm)

EG35.11

Freight class is 92.5.

…insulated bottom mount cutout size: 12˝ x 20˝ (305 x 508mm)

(•) MTS (made to stock) / ( ) MTO (made to order)

Infinite Controls • Infinite control offers high and low selections along with eight other temperature settings. width x depth in. mm

weight lbs. kg

137⁄8˝ x 217⁄8˝ 352 x 556

13

5.9

137⁄8˝ x 217⁄8˝ 352 x 556

13

5.9

cu ft

Top Mount model # 1.7 120V, 1200W, 10.0A TM1220FW-120 TM1220FW-120-D 1.7 240V, 1200W, 5.0A TM1220FW-240 TM1220FW-240-D electrical data

list 585 633 604 651

Bottom Mount model # BM1220FW-120 BM1220FW-120-D BM1220FW-240 BM1220FW-240-D

list 552 596 569 613

Insulated Bottom MT model # list BM1220FW-120I 664 BM1220FW-120I-D 718 BM1220FW-240I 698 BM1220FW-240I-D 749

list 549 627 549 627 549 627

Insulated Bottom MT model # list BM1220FW-120TI 652 BM1220FW-120TI-D 718 BM1220FW-240TI 652 BM1220FW-240TI-D 718 BM1220FW-240TI6 652 BM1220FW-240TI6-D 718

Thermostat Controls • Thermostatic control—snap acting type—degree range of 86˚ to 550˚F for rapid heat recovery. width x depth in. mm

weight lbs. kg

137⁄8˝ x 217⁄8˝ 352 x 556

13

5.9

137⁄8˝ x 217⁄8˝ 352 x 556

13

5.9

137⁄8˝ x 217⁄8˝ 352 x 556

13

5.9

137⁄8˝ x 217⁄8˝ 352 x 556

13

5.9

cu ft

Top Mount model # 1.7 120V, 1200W, 10.0A TM1220FW-120T TM1220FW-120T-D • 1.7 240V, 1200W, 5.0A TM1220FW-240T TM1220FW-240T-D 1.7 208/240V, TM1220FW-240T6 1200/1600W, 5.8/6.6A TM1220FW-240T6-D • 1.7

electrical data

208/240/277V, 900/1200/1600W 4.3/5.0/5.8A

TM1220FW-277T TM1220FW-277T-D

list 625 685 625 685 625 685

Bottom Mount model # BM1220FW-120T BM1220FW-120T-D BM1220FW-240T BM1220FW-240T-D BM1220FW-240T6 BM1220FW-240T6-D

625 BM1220FW-277T 685 BM1220FW-277T-D

549 BM1220FW-277TI 627 BM1220FW-277TI-D

652 718

Top Mounting Plates for Laminated Plastic or Wood Countertops description

model # TMP

for top mount units

list 132

Recessed Control Panels Stainless Steel Construction

FEATURES:

• Available for OEM installations or other applications. Freight class is 85.0. (•) MTS (made to stock) / ( ) MTO (made to order)

single

double

description

triple

246

single double triple

cutout dimensions in. mm 51⁄16˝ x 211⁄16˝ 83⁄8˝ x 211⁄16˝ 113⁄16˝ x 211⁄16˝

129 x 68 213 x 68 300 x 68

PUNCHED NOT PUNCHED model # list model # list 305198 44 305197 41 305193 54 305123 43 305196 61 305124 55

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


COOKING & WARMING EQUIPMENT Catalog Section 35

Hot Food Merchandising Carts see spec sheet

• • • • • • • • •

EG35.05

Full Service FEATURES:

Two heating wells. Solid top work surface. 120V operation with cord and 15-amp plug. Two spillage pans. One full-size inset with rolltop cover. One 2⁄3-size inset with lid. One 1⁄3-size inset with lid. Two 11⁄4-quart insets. Color-coordinated umbrella.

Note:

Consult factory for available models which require special order graphics.

Freight class is 92.5. (•) MTS (made to stock) / ( ) MTO (made to order)

description with hinged lids

width x length in. mm 221⁄2˝ x 48˝

572 x 1219

weight lbs. kg

cu ft

467

63

212

model # HDC48-120NYF

Hot Dog Merchandisers see spec sheet

EG35.06

Countertop Service

FEATURES:

list 13504

• Fully insulated countertop units hold 50 hot dogs and two containers for condiments. • Equipped with 1200-watt heater. • Stainless steel construction. • Removable insets for easy clean-up. • Adjustable temperature control with indicator light. • Cord with 15-amp NEMA 5-15 120-volt plug. Note:

CAN BE SHIPPED UPS

Freight class is 92.5. (•) MTS (made to stock) / ( ) MTO (made to order)

description with hinged lids with lift-off lids

width x length in. mm 141⁄4˝ x 221⁄4˝ 141⁄4˝ x 221⁄4˝

362 x 565 362 x 565

weight lbs. kg

cu ft

electrical data

40 40

6.3 6.3

120V, 10A, 1200W 120V, 10A, 1200W

18.1 18.1

Hot Dog Sterno Units see spec sheet

EG35.06

Large Units • Holds up to six 8-oz. fuel cans (not included). description

width x length in. mm

with hinged lids 141⁄4˝ x 221⁄4˝ 362 x 565 with lift-off lids 141⁄4˝ x 221⁄4˝ 362 x 565

weight lbs. kg 28 28

12.7 12.7

model # HD1220FWD-120TH • HD1220FWD-120T

list 2168 2067

• Units are countertop models. • Small units include one 1⁄3-size inset with lid. • Large units include two containers for condiments, one 1⁄3-size inset, and one 2⁄3-size inset with lid. FEATURES: • Hinged or lift-off lids.

cu ft model # list 4.0 HD1220FW-SH 2147 4.0 HD1220FW-S 2046

Note:

CAN BE SHIPPED UPS

Freight class is 92.5. (•) MTS (made to stock) / ( ) MTO (made to order)

Small Units • Holds two 8-oz. fuel cans (not included). description with hinged lids with lift-off lids

width x length in. mm 81⁄4˝ x 14˝ 81⁄4˝ x 14˝

210 x 356 210 x 356

weight lbs. kg 17 17

7.7 7.7

cu ft model # 3.0 HD612FW-SH 3.0 HD612FW-S

list 1373 1309

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

247


COOKING & WARMING EQUIPMENT Catalog Section 35

Food Pans and Round Insets see spec sheet

EG30.20

FEATURES:

• All pans, lids, and insets are stainless steel. • Minimum purchase $165 net, any assortment. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Food Pans/Adapter Bars description full size pan, 203⁄4˝ x 123⁄4˝ x 21⁄2˝ (527 x 324 x 64mm) full size pan, 203⁄4˝ x 123⁄4˝ x 4˝ (527 x 324 x 102mm) half size pan, 103⁄8˝ x 123⁄4˝ x 21⁄2˝ (264 x 324 x 64mm) half size pan, 103⁄8˝ x 123⁄4˝ x 4˝ (264 x 324 x 102mm) one-third size pan, 67⁄8˝ x 123⁄4˝ x 21⁄2˝ (175 x 324 x 64mm) one-third size pan, 67⁄8˝ x 123⁄4˝ x 4˝ (175 x 324 x 102mm) one-fourth size pan, 63⁄8˝ x 103⁄8˝ x 21⁄2˝ (162 x 264 x 64mm) one-fourth size pan, 63⁄8˝ x 103⁄8˝ x 4˝ (162 x 264 x 102mm) 10˝ (254mm) adapter bar 12˝ (305mm) adapter bar

model # 301669 303775 304050 304051 304052 304053 304054 304055 301792 301791

list 73 88 43 54 36 46 33 40 27 28

model # 304056 304057 304058 304059

list 72 39 28 36

model # 304020 304021 304060

list 69 103 109

model # 304018 304019 304049

list 18 39 39

model # 305300 303974

list 54 22

Lids for Food Pans

food pans

description full size, with handle half size, with handle one-third size, with handle one-fourth size, with handle

Round Insets description 4-quart inset for 61⁄2˝ (165mm) opening 7-quart inset for 81⁄2˝ (216mm) opening 11-quart inset for 101⁄2˝ (267mm) opening

Lids for Round Insets description For 4-quart inset For 7-quart inset For 11-quart inset

round inset with optional lid

Other description brass drain stopper

Rolltop Cover

Freight class is70.0.

see spec sheet

description fits over heat well

248

EG30.20

model # 501585

(•) MTS (made to stock) / ( ) MTO (made to order)

list 408 100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


Underbar Accessories 1800/2200 Series ..265-266

Custom Options ......267 1800 Series Blender Modules ..........255 Cocktail Units ................253 Cocktail Workstations....253 Combination Units ........252 Glass Rack Storage Units ............255 Ice Chests......................254 Liquor Display Units......256 Sinks ............................251 Workboards ..................256

2200 Series Blender Modules ..........261 Cocktail Units ................259

CUSTOM

NSF ®

Cocktail Workstations....259 Combination Units ........258 Glass Rack Storage Units ............261 Ice Chests......................260 Liquor Display Units......262 Sinks ............................257 Workboards ..................262

1800/2200 Series Corner Drainboards ......263 Modular Angle Fillers ....263 Pass-Thru Ice Chests ....265

Modular Add-On Service Units Fillers, Storage Units, Workboards ..............264 Hand Sinks ....................263 Stepdown Units ............264

Spec-Bar® BLENDER STATIONS ......279 COCKTAIL STATIONS ......280 ICE CHESTS Bottle Racks ..................269 Combination ..................270 Drop-In..........................271 Pass-Thru......................271 Standard........................269 MOYER DIEBEL GLASSWASHERS ..........278 PORTABLE BARS ..........284 SINKS Four-Compartment ........274 Hand Sinks ....................272 Three-Compartment ......273 Two-Compartment ........273 Wet Waste Sinks ..........274

WORKBOARDS Angle ............................276 Cabinets ........................277 Corner ..........................276 Recessed ......................275 Standard........................275 OTHER SPEC-BAR® Beer Drainers ................278 Beverage Dispensers ....280 Dry Waste & Tubing Chases............281 Filler Boards ..................277 Glass Rack Storage Units ................283 Liquor Displays ............281 Mini Bottle Racks ..........283 Modular Bar Die ............271 Speed Rails ............282-283

EAGLE’s Modular Bar Die now available for 1800 Series and 2200 Series underbar equipment.

rear view— shown with 1800 series underbar equipment

flat wall style modular bar die

UL ®

• Underbar equipment can be mounted to, or just placed against, modular bar dies. Bar dies must be securely fastened to the floor. For added stability, fasten one or both ends to a wall. • Bar dies enclose and hide soda, beer, electrical and plumbing lines in a chase incorporated into the unit. • The chase serves as a rear wall and splash. Front of the bar can be covered by removable panels that provide easy access to the chase for future modifications and maintenance. • Panels can be covered in a decorative laminate, an elegant wood millwork finish or a stunning stainless steel finish. • Add decorative brass or chrome rails and fittings to match any decor. • Optional factory U.L. wiring and plumbing package. See page 271 for Spec-Bar® Modular Bar Dies.

front view— shown with wood millwork finish (note: base shown for display only)

249


What’s The Difference Between Better And Best? Please note the difference in the chart below, showing our 2200 Series (page 260) and our Spec-Bar® Series ice chests (page 269) as an example.

2200 Series Ice Chest

Spec-Bar® Series Ice Chest

OUR BEST!

COMPONENTS

MATERIALS USED IN 2200 SERIES ICE CHEST

MATERIALS USED IN SPEC-BAR® ICE CHEST

Front End panels Ice bin

22 gauge, type 304 22 gauge, galvanized 20 gauge type 304 stainless steel, fabricated stainless steel, with fiberglass insulation 20 gauge, type 304 22 gauge, type 304 stainless steel 22 gauge, galvanized 22 gauge, galvanized zinc plated 15⁄8˝ diameter, galvanized n/a ABS plastic, adjustable

20 gauge, type 304 20 gauge, type 304 20 gauge type 304 fabricated stainless steel, with foamed-in-place insulation, polymer breaker strip 20 gauge, type 304 20 gauge, type 304 stainless steel 18 gauge, galvanized 18 gauge, type 304 stainless steel stainless steel 15⁄8˝ diameter, stainless steel 11⁄4˝ diameter, adjustable, type 304 stainless steel stainless steel, adjustable

Sliding lid Backsplash Back panel Exterior bottom Gussets Legs Crossbraces Feet

EITHER WAY, YOU CAN’T GO WRONG! Whatever your underbar needs might be, EAGLE will meet those needs. From ice chests to combination units to custom configurations,

WE DELIVER!


UNDERBAR Catalog Section 40

1800 Series Underbar Sinks see spec sheet

EG40.07 FEATURES:

• • • •

20˝ front-to-back. 10˝ x 14˝ x 10˝ (254 x 356 x 254mm) bowls. 11⁄2˝ (38mm) drains with standpipes. Faucets (four-bowls feature two faucets). Freight class is 110.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Note:

Stainless steel leg kits available. See page 266.

EASY TO ORDER! Leg & Faucet Upgrade Kits Stainless steel legs (#305540) and T&S faucet (#313302). Example: B3L-2-18-LF.

model #B5C-18

bullnose front edge

B3L-2-18

4 stainless steel legs and 1 faucet add suffix list “-LF” 708

side view dimensions

list: 1335

B3R-2-18 • list: 1335 B4C-2-18

weight: 68lbs. 30.8kg cu. ft.: 10.9

weight: 68lbs. 30.8kg cu. ft.: 10.9

B4L-18 •

B4R-18 •

list: 1521

weight: 74lbs. 33.6kg cu. ft.: 14.1

B6C-18 •

weight: 86lbs. 39.0kg

B6C-4-18 •

weight: 86lbs. 39.0kg

list:

1654

cu. ft.: 20.2

list:

1952

cu. ft.: 20.5

weight: 74lbs. 33.6kg cu. ft.: 14.1

list: 1521 B5L-18

weight: 74lbs. 33.6kg cu. ft.: 14.1

list: 1354 B4L-2-18

list: 1566 B5R-18

weight: 92lbs. 41.7kg

B7C-4-18 •

weight: 90lbs. 40.8kg

list:

1838

2077

cu. ft.: 23.7

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

stainless steel legs add suffix list “-SL” 166 per unit

list: 1354

weight: 74lbs. 33.6kg cu. ft.: 14.1

list: 1566 B5C-18 •

weight: 80lbs. 36.3kg cu. ft.: 17.3

cu. ft.: 23.7

list:

list: 1354 B4R-2-18

weight: 74lbs. 33.6kg cu. ft.: 14.1

weight: 80lbs. 36.3kg cu. ft.: 17.3

B7C-18 •

4 stainless steel legs and 2 faucets add suffix list “-LF” 1242

list: 1566

weight: 80lbs. 36.3kg cu. ft.: 17.3

B8C-18

list:

weight: 98lbs. 44.5kg

B8C-4-18 •

weight: 104lbs. 47.2kg

2011

cu. ft.: 26.9

list:

2260

cu. ft.: 26.9

251


UNDERBAR Catalog Section 40

1800 Series Combination Units see spec sheet

10˝ x 14˝ x 10˝ (254 x 356 x 254mm) bowls. Six galvanized legs. 11⁄2˝ (38mm) drains with standpipes. Ice bins. Speed rail. Faucet. Front-to-back is 20˝ (508mm) on all units, excluding speed rail. • Ice bins are 151⁄2˝ x 193⁄4˝ x 8˝ (394 x 502 x 203mm) and are located on left or right ends.

• • • • • • •

EG40.08

FEATURES:

Freight class is 110.0. BC8C-18R

(•) MTS (made to stock) / ( ) MTO (made to order) Note:

Stainless steel leg kits available. See page 266.

EASY TO ORDER! Leg & Faucet Upgrade Kits

bullnose front edge

Stainless steel legs (#305540) and T&S faucet (#313302). Example: BC9C-18R-LF.

6 stainless steel legs and 1 faucet add suffix list “-LF” 791

side view dimensions

BC7C-18R

list:

2378

weight: 110lbs. 49.9kg

cu. ft.: 23.7

BC8C-18L

list:

weight: 122lbs. 55.3kg

cu. ft.: 26.9

2463

BC7C-18L

list:

weight: 110lbs. 49.9kg

BC9C-18R

BC10C-18L

list:

weight: 198lbs. 89.8kg

cu. ft.: 23.7

list:

weight: 188lbs. 85.3kg

2899

2378

2713

cu. ft.: 30.0

BC8C-18R

weight: 122lbs. 55.3kg

BC9C-18L

weight: 198lbs. 89.8kg

list:

cu. ft.: 30.0

2899

cu. ft.: 33.2

Optional Components for Combination Units description stainless steel (s/s) legs

add suffix # -SL

sealed-in post-mix cold plate, 7-circuit

-7

252

list 249 per unit 1419

description s/s legs & s/s feet s/s legs & s/s gussets s/s legs, s/s feet & s/s gussets

add suffix # -SLF -SLG -SLGF

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

2463

cu. ft.: 26.9

list:

weight: 188lbs. 85.3kg

BC10C-18R

cu. ft.: 33.2

list:

list 351 per unit 441 per unit 543 per unit

2713


UNDERBAR Catalog Section 40 • Insulated ice bins. • 6- or 8-bottle capacity. • Modular, providing for custom configuration using standard components. • Fabricated ice bins. FEATURES: • Front-to-back is 20˝ (508mm).

1800 Series Cocktail Units see spec sheet

EG40.02

bullnose front edge

PACKAGING • Units with cold plate are wood-crated. Note:

Stainless steel leg kits available. To order, add $166 per unit ($249 per unit for models requiring six legs) and suffix “-SL”. Example: B2CT-18-SL For more stainless steel leg kits, see page 266.

Freight class is 110.0.

B2CT-18

(•) MTS (made to stock) / ( ) MTO (made to order)

#B3CT-18

#B2CT-18

without 7-circuit post-mix cold plate length ice bin depth ice capacities in. mm in. mm lbs. kg 24˝ 24˝ 20˝ 24˝ width 36˝ (508mm) 36˝ 36˝

610 610 610 914 914 914

8˝ 12˝ 16˝ 8˝ 12˝ 16˝

203 63 305 94 406 125 203 63 305 94 406 125

28.6 42.6 56.7 28.6 42.6 56.7

cu ft 7.8 7.8 7.8 11.0 11.0 11.0

sh. weight lbs. kg 52 55 58 72 75 78

23.6 24.9 26.3 32.7 34.0 35.4

model # B2CT-18 • B2CT-12D-18 B2CT-16D-18 B3CT-18 • B3CT-12D-18 B3CT-16D-18

list 992 1206 1546 1198 1463 1884

with 7-circuit post-mix cold plate sh. weight lbs. kg 146 149 151 219 221 224

66.2 67.6 68.5 99.3 100.2 101.6

model # B2CT-18-7 • B2CT-12D-18-7 B2CT-16D-18-7 B3CT-18-7 • B3CT-12D-18-7 B3CT-16D-18-7

list 2218 2433 2773 2477 2742 3163

includes stainless steel sliding cover

1800 Series Cocktail Workstations see spec sheet

• 8˝ (203mm) deep ice bins can be located on left (L) or right (R) side. • Single speed rail. • Modular, providing for custom configuration using standard components. • Fabricated ice bins. • Front-to-back is 20˝ (508mm) excluding speedrail. FEATURES:

EG40.03

bullnose front edge

Note:

CWS4-18R

Stainless steel leg kits available. To order, add $166 per unit ($249 per unit for models requiring six legs) and suffix “-SL”. Example: CWS5-18R-SL For more stainless steel leg kits, see page 266.

length in. mm 48˝ 48˝ 48˝ 20˝ 48˝ width 60˝ (508mm) 60˝ 60˝ 60˝

1219 1219 1219 1219 1524 1524 1524 1524

weight ice bin depth lbs. kg in. mm 63 93 63 93 73 103 73 103

28.6 42.2 28.6 42.2 33.1 46.3 33.1 46.3

8˝ 8˝ 8˝ 8˝ 8˝ 8˝ 8˝ 8˝

203 203 203 203 203 203 203 203

cu ft 14.1 14.1 14.1 14.1 17.3 17.3 17.3 17.3

model # CWS4-18R CWS4-18R-7 * CWS4-18L CWS4-18L-7 * CWS5-18R CWS5-18R-7 * CWS5-18L CWS5-18L-7 *

list 1420 2698 1420 2698 1575 3440 1575 3440

* includes 7-circuit post-mix cold plate and 6 legs

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

Freight class is 110.0. (•) MTS (made to stock) / ( ) MTO (made to order)

#CWS4-18L

#CWS4-18R

253


UNDERBAR Catalog Section 40

1800 Series Ice Chests see spec sheet EG40.04A EG40.04B

FEATURES:

• Stainless steel sliding cover. • Modular, providing for custom configuration using standard components. • Fabricated ice bins. • Front-to-back is 20˝ (508mm).

PACKAGING • Units with cold plate are wood-crated.

bullnose front edge

Note:

#B2IC-18

Stainless steel leg kits available. To order, add $166 per unit and suffix “-SL”. Example: B30IC-18-SL For more stainless steel leg kits, see page 266.

Freight class is 110.0. (•) MTS (made to stock) / ( ) MTO (made to order)

#B36IC-18

B2IC-18

#B48IC-16D-18

without 7-circuit post-mix cold plate ice bin ice length depth capacity in. mm in. mm lbs. kg 12˝ 12˝ 12˝ 18˝ 18˝ 18˝ 24˝ 24˝ 24˝ 20˝ 30˝ width 30˝ (508mm) 30˝ 36˝ 36˝ 36˝ 42˝ 42˝ 42˝ 48˝ 48˝ 48˝

305 305 305 457 457 457 610 610 610 762 762 762 914 914 914 1067 1067 1067 1219 1219 1219

8˝ 12˝ 16˝ 8˝ 12˝ 16˝ 8˝ 12˝ 16˝ 8˝ 12˝ 16˝ 8˝ 12˝ 16˝ 8˝ 12˝ 16˝ 8˝ 12˝ 16˝

203 305 406 203 305 406 203 305 406 203 305 406 203 305 406 203 305 406 203 305 406

25 11.3 37 16.8 49 22.2 44 20.0 65 29.5 87 39.5 63 28.6 94 42.6 125 56.7 82 37.2 123 55.8 163 73.9 101 45.8 151 68.5 201 91.2 120 54.4 180 81.6 239 108.4 139 63.1 208 94.3 278 126.1

cu ft 3.9 3.9 3.9 5.8 5.8 5.8 7.8 7.8 7.8 9.5 9.5 9.5 11.0 11.0 11.0 13.6 13.6 13.6 15.5 15.5 15.5

sh. weight lbs. kg 42 44 46 48 52 58 52 61 66 60 74 87 74 95 101 71 98 104 82 101 113

19.1 20.0 20.9 21.8 23.6 26.3 23.6 27.7 29.9 27.2 33.6 39.5 33.6 43.1 45.8 32.7 44.5 47.2 37.2 45.8 51.3

model # B12IC-18 B12IC-12D-18 B12IC-16D-18 B18IC-18 B18IC-12D-18 B18IC-16D-18 B2IC-18 • B2IC-12D-18 B2IC-16D-18 B30IC-18 B30IC-12D-18 B30IC-16D-18 B36IC-18 • B36IC-12D-18 B36IC-16D-18 B42IC-18 B42IC-12D-18 B42IC-16D-18 B48IC-18 B48IC-12D-18 B48IC-16D-18

Sliding Cover Kits EG40.56 description

254

sh. weight lbs. kg n/a n/a n/a n/a n/a n/a 132 167 175 136 168 193 152 187 198 169 189 228 211 233 245

59.9 75.8 79.4 61.7 76.2 87.5 68.9 84.8 89.8 76.7 85.7 103.4 95.7 105.7 111.1

model # n/a n/a n/a n/a n/a n/a B2IC-18-7 • B2IC-12D-18-7 B2IC-16D-18-7 B30IC-18-7 B30IC-12D-18-7 B30IC-16D-18-7 B36IC-18-7 B36IC-12D-18-7 B36IC-16D-18-7 B42IC-18-7 B42IC-12D-18-7 B42IC-16D-18-7 B48IC-18-7 B48IC-12D-18-7 B48IC-16D-18-7

list n/a n/a n/a n/a n/a n/a 2689 2904 3244 2833 3075 3455 2980 3245 3666 3127 3418 3877 3271 3585 4222

Freight class is 70.0.

see spec sheet

type 304 stainless steel sliding cover

list 977 1143 1407 1122 1311 1613 1271 1485 1825 1414 1656 2036 1561 1826 2247 1708 1999 2458 1852 2166 2803

with 7-circuit post-mix cold plate

for 12˝ (305mm) long ice chests for 18˝ (457mm) long ice chests for 24˝ (610mm) long ice chests for 28˝ (711mm) long ice chests for 30˝ (762mm) long ice chests for 36˝ (914mm) long ice chests for 42˝ (1067mm) long ice chests for 48˝ (1219mm) long ice chests

(•) MTS (made to stock) / ( ) MTO (made to order)

model # SC-18/22-12 SC-18/22-18 SC-18/22-24 • SC-18/22-28 SC-18/22-30 SC-18/22-36 SC-18/22-42 SC-18/22-48

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

list 103 128 139 141 157 187 227 272


UNDERBAR Catalog Section 40 • 15A 120V receptacle supplied for field wiring. • Choose between left- (L) or right-hand (R) models. • Modular, providing for custom configuration using standard components. • Stainless steel construction • Front-to-back is 20˝ (508mm).

1800 Series Blender Modules see spec sheet EG40.05

FEATURES:

bullnose front edge

Note: Stainless steel leg kits available. To order, add $166 per unit ($249 per unit for models requiring six legs; $332 per unit for models requiring eight legs) and suffix “-SL”. Example: BM62-18L-SL For more stainless steel leg kits, see page 266.

Freight class is 100.0.

model # BD24-18L

(•) MTS (made to stock) / ( ) MTO (made to order)

…with 10˝ x 14˝ x 9.5˝ (254 x 356 x 241mm) Sink

20˝ width (508mm)

length weight cubic in. mm lbs. kg feet model # 24˝ 610 40 18.1 7.7 BD24-18R 24˝ 610 40 18.1 7.7 BD24-18L

…with 15.5˝ x 19.75˝ x 8˝ (394 x 502 x 203mm) Ice Chest length weight cubic in. mm lbs. kg feet model # list 36˝ 914 67 30.4 10.9 BM3-18R 1646 36˝ 914 97 44.0 10.9 BM3-18R-7 * 3527 36˝ 914 67 30.4 10.9 BM3-18L 1646 36˝ 914 97 44.0 10.9 BM3-18L-7 * 3527 50˝ 1270 90 40.8 16.1 BM50-18R ** 2232 50˝ 1270 120 54.4 16.1 BM50-18R-7 * 4114 50˝ 1270 90 40.8 16.1 BM50-18L ** 2232 50˝ 1270 120 54.4 16.1 BM50-18L-7* 4114 50˝ 1270 90 40.8 16.1 BM50L-18R ** 2232 50˝ 1270 120 54.4 16.1 BM50L-18R-7 *** 4114 50˝ 1270 90 40.8 16.1 BM50R-18L ** 2232 50˝ 1270 120 54.4 16.1 BM50R-18L-7 *** 4114 62˝ 1575 110 49.9 19.3 BM62-18R ** 2933 62˝ 1575 140 63.5 19.3 BM62-18R-7 *** 4212 62˝ 1575 110 49.9 19.3 BM62-18L ** 2933 62˝ 1575 140 63.5 19.3 BM62-18L-7*** 4212

list 1496 1496

model # BM3-18L

model # BM50-18L

model # BM50R-18L

model # BM62-18L

20˝ width (508mm)

* includes 7-circuit post-mix cold plate and 6 legs ** includes 6 legs *** includes 7-circuit post-mix cold plate and 8 legs

1800 Series Glass Rack Storage Units see spec sheet EG40.00

FEATURES:

bullnose front edge

• Modular, providing for custom configuration using standard components. Stainless steel construction

Note:

Stainless steel leg kits available. To order, add $166 per unit ($249 per unit for models requiring six legs; $332 per unit for models requiring eight legs) and suffix “-SL”. Example: FBGR24-18-SL

Note:

Center shelf available for WBGR24-18. To order, add 20% to list price and suffix “-CS”. Example: WBGR24-18-CS

For more stainless steel leg kits, see page 266.

WBGR24-18 model #FBGR24-18

Freight class is 100.0.

model #GR24-18

(•) MTS (made to stock) / ( ) MTO (made to order)

with Flatboard Top width x length in. mm

cu ft

20˝ x 12˝ 508 x 305 13.5 20˝ x 18˝ 508 x 457 15.6 20˝ x 24˝ 508 x 610 17.7 *191⁄2˝ (954mm) front-to-back.

weight lbs. kg 18 27 36

8.2 12.2 16.3

model # FBGR12-18 FBGR18-18 FBGR24-18

with Recessed Worktop list 1131 1189 1251

weight lbs. kg model # 18 8.2 WBGR12-18 27 12.2 WBGR18-18 36 16.3 WBGR24-18

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

with Open Top*

weight list lbs. kg 1216 14 6.4 1279 18 8.2 1346 27 12.2

model # GR12-18 GR18-18 GR24-18

list 894 940 989

255


UNDERBAR Catalog Section 40 • Embossed drain surface for ease of draining. • Modular, providing for custom configuration using standard components. • Stainless steel construction • Front-to-back is 20˝ (508mm).

1800 Series Workboards see spec sheet EG40.06

FEATURES: Note:

bullnose front edge

Stainless steel leg kits available. To order, add $166 per unit and suffix “-SL”. Example: WB2-18-SL For more stainless steel leg kits, see page 266.

Freight class is 100.0. (•) MTS (made to stock) / ( ) MTO (made to order)

WB2-18

20˝ width (508mm)

length in. mm

weight lbs. kg

24˝ 36˝ 48˝

26 55 58

610 914 1219

11.8 25.0 26.3

cubic feet model # 7.7 WB2-18 • 10.9 WB3-18 14.1 WB4-18

list 720 917 1128

WB3-18

WB4-18

• Nominal 43⁄8˝ (111mm) wide steps. • Modular, providing for custom configuration using standard components. • Stainless steel construction • Front-to-back is 191⁄2˝ (495mm).

1800 Series Liquor Display Unit see spec sheet EG40.01

FEATURES: Note:

Stainless steel leg kits available. To order, add $166 per unit and suffix “-SL”. Example: LD24-18-SL For more stainless steel leg kits, see page 266.

Freight class is 100.0. (•) MTS (made to stock) / ( ) MTO (made to order)

width x length in. mm 19˝ x 24˝

495 x 610

weight lbs. kg 46

20.9

cubic feet model # 7.7 LD24-18

list 1093

1800 Series Lower-Tier Liquor Display Unit see spec sheet EG40.01 FEATURES:

• Steps are lower for more underbar clearance. • Modular, providing for custom configuration using standard components. • Stainless steel construction • Front-to-back is 191⁄2˝ (495mm). Note:

Stainless steel leg kits available. To order, add $166 per unit and suffix “-SL”. Example: LLD24-18-SL For more stainless steel leg kits, see page 266.

Freight class is 100.0. (•) MTS (made to stock) / ( ) MTO (made to order)

width x length in. mm 191⁄2˝ x 24˝

256

495 x 610

weight lbs. kg 46

20.9

cubic feet model # 7.7 LLD24-18

list 1159 100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


UNDERBAR Catalog Section 40

2200 Series Underbar Sinks see spec sheet

EG40.14

FEATURES:

• • • • •

10˝ x 14˝ x 10˝ (254 x 356 x 254mm) bowls. 11⁄2˝ (38mm) drains with standpipes. 4˝ (102mm) rear deck. Splash mount faucets (four-bowls feature two faucets). Front-to-back is 24˝ (610mm). Freight class is 150.0. (•) MTS (made to stock) / ( ) MTO (made to order) Note:

Stainless steel leg kits available. See page 266.

EASY TO ORDER! Leg & Faucet Upgrade Kits Stainless steel legs (#305540) and T&S faucet (#313302). Example: B3L-2-22-LF.

4 stainless steel legs and 1 faucet add suffix list “-LF” 708

bullnose front edge

4 stainless steel legs and 2 faucets add suffix list “-LF” 1242

side view dimensions

B3L-2-22

weight: cu. ft.:

list: 1411 B3R-2-22

70lbs. 31.8kg 11.9

B4L-22

weight: cu. ft.:

weight: cu. ft.:

list: 1608 B4R-22

70lbs. 31.8kg 20.3

B6C-22 •

weight: 93lbs. 42.2kg

B6C-4-22 •

weight: 100lbs. 45.4kg

weight: cu. ft.:

list:

1767

cu. ft.: 24.0

list:

2080

cu. ft.: 24.0

list: 1411 B4C-2-22

70lbs. 31.8kg 11.9

weight: cu. ft.:

76lbs. 34.5kg 16.5

list: 1608 B5L-22

70lbs. 31.8kg 20.3

weight: cu. ft.:

list: 1451 B4L-2-22

weight: cu. ft.:

list: 1451 B4R-2-22

76lbs. 34.5kg 16.5

list: 1679 B5C-22 •

list: 1679 B5R-22

78lbs. 35.4kg 20.3

B7C-22

weight: 100lbs. 45.4kg

B7C-4-22 •

weight: 113lbs. 51.3kg

list:

weight: cu. ft.:

weight: cu. ft.:

add suffix list “-SL” 166 per unit

list: 1451

76lbs. 34.5kg 16.5

list: 1679

78lbs. 35.4kg 20.3

list:

weight: 118lbs. 53.5kg

2223 B8C-4-22

cu. ft.: 27.8

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

78lbs. 35.4kg 20.3

1965 B8C-22

cu. ft.: 27.8

list:

weight: cu. ft.:

stainless steel legs

weight: 123lbs. 55.8kg

2157

cu. ft.: 31.5

list:

2407

cu. ft.: 31.5

257


UNDERBAR Catalog Section 40

2200 Series Combination Units see spec sheet

• 10˝ x 14˝ x 10˝ (254 x 356 x 254mm) bowls. • Ice bins, speed rail, and faucet (4-bowl units feature two faucets). • 11⁄2˝ (38mm) drains with standpipes. • Front-to-back is 24˝ (610mm) on all units. • Ice bins are 151⁄2˝ x 193⁄4˝ x 8˝ (394 x 502 x 203mm) and are located on left, right or both ends.

EG40.15

FEATURES:

Freight class is 110.0. (•) MTS (made to stock) / ( ) MTO (made to order)

EASY TO ORDER! Leg & Faucet Upgrade Kits model # BC8C-22R

Stainless steel legs (#305540) and T&S faucet (#313302). Example: BC8C-22L-LF

6 stainless steel legs and 1 faucet add suffix list “-LF” 791

bullnose front edge

BC7C-22R

weight: cu. ft.:

list:

121lbs. 54.9kg 27.8

BC8-4C-22L

weight: cu. ft.:

list:

weight: cu. ft.:

list:

weight: cu. ft.:

2541 BC8C-22R

121lbs. 54.9kg 27.8

3004 BC9C-22R

205lbs. 93.0kg 31.5

BC9-4C-22L

weight: cu. ft.:

2541 BC7C-22L

list:

. BC10C-22R

215lbs. 97.5kg 35.3

weight: cu. ft.:

list:

weight: cu. ft.:

list:

weight: cu. ft.:

weight: cu. ft.:

list:

weight: cu. ft.:

6 stainless steel legs and 2 faucets

8 stainless steel legs and 2 faucets

add suffix list “-LF” 1333

add suffix list “-LF” 1416

2627 BC8-4C-22R

132lbs. 59.9kg 31.5

2879 BC9C-22 R&L list:

177lbs. 80.3kg 35.3

3069 BC10C-22L

211lbs. 95.7kg 39.0

2627 BC8C-22L

132lbs. 59.9kg 31.5

2879 BC9C-22L

177lbs. 80.3kg 35.3

list:

weight: cu. ft.:

list:

8 stainless steel legs and 1 faucets add suffix list “-LF” 874

weight: cu. ft.:

205lbs. 93.0kg 31.5

3481 BC9-4C-22R

208lbs. 94.3kg 35.3

weight: cu. ft.:

list: 3004

list: 3132

215lbs. 97.5kg 35.3

list: 3069 BC10C-22 R&L list: 3574 BC10-4C-22 R&L list: 3897

211lbs. 95.7kg 39.0

weight: cu. ft.:

211lbs. 95.7kg 39.0

weight: cu. ft.:

235lbs. 106.6kg 39.0

Optional Components for Combination Units description 6 stainless steel (s/s) legs 8 s/s legs (for models with suffix “R&L”) sealed-in post-mix cold plate, 7-circuit (on “R&L” models, 2 are required)

258

add suffix # -SL -SL “-7”

list 249 per unit 332 per unit 1419

description 6 s/s legs & s/s feet 8 s/s legs & s/s feet 6 s/s legs & s/s gussets 8 s/s legs & s/s gussets 6 s/s legs, s/s feet & s/s gussets 8 s/s legs, s/s feet & s/s gussets

add suffix # -SLF -SLF -SLG -SLG -SLGF -SLGF

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

list 351 per unit 468 per unit 441 per unit 588 per unit 543 per unit 724 per unit


UNDERBAR Catalog Section 40

2200 Series Cocktail Units

Insulated 8˝ (203mm) deep ice bins. 5˝ (127mm) backsplash. 6- or 8-bottle capacity. Modular, providing for custom configuration using standard components. • Fabricated ice bins. • Front-to-back is 24˝ (610mm). • • • •

see spec sheet EG40.09

bullnose front edge

FEATURES:

PACKAGING • Units with cold plate are wood-crated. Note:

Stainless steel leg kits available. To order, add $166 per unit and suffix “-SL”. Example: B2CT-22-SL For more stainless steel leg kits, see page 266.

Freight class is 110.0. #B40CT-22

#B3CT-22

(•) MTS (made to stock) / ( ) MTO (made to order)

without cold plate ice bin ice length depth capacities cu in. mm in. mm lbs. kg ft 24˝ 610 8˝ 203 63 24˝ 610 12˝ 305 94 24˝ 610 16˝ 406 125 20˝ 36˝ 914 8˝ 203 63 width 36˝ 914 12˝ 305 94 (508mm) 36˝ 914 16˝ 406 125 40˝ 1016 8˝ 203 74 40˝ 1016 12˝ 305 110 40˝ 1016 16˝ 406 146 includes stainless steel sliding cover

#B2CT-22

28.6 42.6 56.7 28.6 42.6 56.7 33.6 49.9 66.2

7.8 7.8 7.8 11.0 11.0 11.0 11.0 11.0 11.0

sh. weight lbs. kg model # 56 25.4 B2CT-22 • 59 26.8 B2CT-12D-22 61 27.7 B2CT-16D-22 71 32.2 B3CT-22 • 75 34.0 B3CT-12D-22 78 35.4 B3CT-16D-22 88 39.9 B40CT-22 92 41.7 B40CT-12D-22 95 43.1 B40CT-16D-22

2200 Series Cocktail Workstations see spec sheet EG40.10

bullnose front edge

FEATURES:

1219 1219 1219 1219 1524 1524 1524 1524

65 95 65 95 75 105 75 105

sh. weight lbs. kg model # 133 60.3 B2CT-22-7 • 137 62.1 B2CT-12D-22-7 141 64.0 B2CT-16D-22-7 153 69.4 B3CT-22-7 • 159 72.1 B3CT-12D-22-7 163 73.9 B3CT-16D-22-7 173 78.3 B40CT-22-7 177 80.3 B40CT-12D-22-7 181 82.1 B40CT-16D-22-7

list 2218 2433 2773 2477 2742 3163 4011 3437 3858

Stainless steel leg kits available. To order, add $166 per unit ($249 per unit for models requiring six legs) and suffix “-SL”. Example: CWS4-22R-SL For more stainless steel leg kits, see page 266.

length weight ice bin depth in. mm lbs. kg in. mm 48˝ 48˝ 48˝ 24˝ 48˝ width 60˝ (610mm) 60˝ 60˝ 60˝

list 992 1206 1546 1198 1463 1884 1893 2158 2579

• 24˝ (610mm) fabricated ice bins can be located on left (L) or right (R) side. • Single speed rail. • Modular, providing for custom configuration using standard components. • Front-to-back is 24˝ (610mm), excluding speedrail. Note:

CWS4-22L

with 7-circuit post-mix cold plate

29.5 43.1 29.5 43.1 34.0 47.6 34.0 47.6

8˝ 8˝ 8˝ 8˝ 8˝ 8˝ 8˝ 8˝

203 203 203 203 203 203 203 203

cu ft 16.5 16.5 16.5 16.5 20.3 20.3 20.3 20.3

Freight class is 110.0. model # CWS4-22R CWS4-22R-7 * CWS4-22L CWS4-22L-7 * CWS5-22R CWS5-22R-7 * CWS5-22L CWS5-22L-7 *

list 1515 2794 1515 2794 1725 3458 1725 3458

(•) MTS (made to stock) / ( ) MTO (made to order)

#CWS4-22L

#CWS4-22R

* includes 7-circuit post-mix cold plate and 6 legs

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

259


UNDERBAR Catalog Section 40

2200 Series Ice Chests see spec sheets EG40.11A EG40.11B FEATURES:

bullnose front edge

• Stainless steel sliding cover. • Ice bins are fabricated. • Modular, providing for custom configuration using standard components. • Front-to-back is 24˝ (610mm).

PACKAGING • Units with cold plate are wood-crated. Note:

Stainless steel leg kits available. To order, add $166 per unit and suffix “-SL”. Example: B30IC-22-SL For more stainless steel leg kits, see page 266.

Freight class is 110.0. (•) MTS (made to stock) / ( ) MTO (made to order)

B30IC-12D-22

#B36IC-22

#B30IC-22

without 7-circuit post-mix cold plate ice bin ice length depth capacity in. mm in. mm lbs. kg 12˝ 12˝ 12˝ 18˝ 18˝ 18˝ 24˝ 24˝ 24˝ 24˝ 28˝ width 30˝ (610mm) 30˝ 30˝ 36˝ 36˝ 36˝ 42˝ 42˝ 42˝ 48˝ 48˝ 48˝

305 305 305 457 457 457 610 610 610 711 762 762 762 914 914 914 1067 1067 1067 1219 1219 1219

8˝ 12˝ 16˝ 8˝ 12˝ 16˝ 8˝ 12˝ 16˝ 8˝ 8˝ 12˝ 16˝ 8˝ 12˝ 16˝ 8˝ 12˝ 16˝ 8˝ 12˝ 16˝

203 305 406 203 305 406 203 305 406 203 203 305 406 203 305 406 203 305 406 203 305 406

25 11.3 37 16.8 49 22.2 44 20.0 65 29.5 87 39.5 63 28.6 94 42.6 125 56.7 150 68.0 82 37.2 123 55.8 163 73.9 101 45.8 151 68.5 201 91.2 120 54.4 180 81.6 239 108.4 139 63.1 208 94.3 278 126.1

cu ft 3.9 3.9 3.9 5.8 5.8 5.8 7.8 7.8 7.8 11.0 9.5 9.5 9.5 11.0 11.0 11.0 13.6 13.6 13.6 15.5 15.5 15.5

sh. weight lbs. kg model # 44 20.0 B12IC-22 47 21.3 B12IC-12D-22 51 23.1 B12IC-16D-22 53 24.0 B18IC-22 56 25.4 B18IC-12D-22 59 26.8 B18IC-16D-22 59 26.8 B2IC-22 • 62 28.1 B2IC-12D-22 65 29.5 B2IC-16D-22 69 31.3 B28IC-22 73 33.1 B30IC-22 76 34.5 B30IC-12D-22 79 35.8 B30IC-16D-22 82 37.2 B36IC-22 • 85 38.6 B36IC-12D-22 88 39.9 B36IC-16D-22 92 41.7 B42IC-22 95 43.1 B42IC-12D-22 98 44.5 B42IC-16D-22 107 48.5 B48IC-22 111 50.3 B48IC-12D-22 114 51.7 B48IC-16D-22

Sliding Cover Kits

sh. weight lbs. kg n/a n/a n/a n/a n/a n/a 121 124 127 131 141 151 161 161 171 181 191 201 211 221 231 241

54.9 56.2 57.6 59.4 64.0 68.5 73.0 73.0 77.6 82.1 86.6 91.2 95.7 100.2 104.8 109.3

model # n/a n/a n/a n/a n/a n/a B2IC-22-7 • B2IC-12D-22-7 B2IC-16D-22-7 B28IC-22-7 B30IC-22-7 B30IC-12D-22-7 B30IC-16D-22-7 B36IC-22-7 B36IC-12D-22-7 B36IC-16D-22-7 B42IC-22-7 B42IC-12D-22-7 B42IC-16D-22-7 B48IC-22-7 B48IC-12D-22-7 B48IC-16D-22-7

list n/a n/a n/a n/a n/a n/a 2689 2904 3244 2611 2833 3075 3455 2980 3245 3666 3127 3418 3877 3271 3585 4222

Freight class is 70.0.

see spec sheet

EG40.56 description

Type 304 stainless steel sliding cover

260

list 977 1143 1407 1122 1311 1613 1271 1485 1825 1192 1414 1656 2036 1561 1826 2247 1708 1999 2458 1852 2166 2803

with 7-circuit post-mix cold plate

for 12˝ (305mm) long ice chests for 18˝ (457mm) long ice chests for 24˝ (610mm) long ice chests for 28˝ (711mm) long ice chests for 30˝ (762mm) long ice chests for 36˝ (914mm) long ice chests for 42˝ (1067mm) long ice chests for 48˝ (1219mm) long ice chests

(•) MTS (made to stock) / ( ) MTO (made to order)

model # SC-18/22-12 SC-18/22-18 SC-18/22-24 • SC-18/22-28 SC-18/22-30 SC-18/22-36 SC-18/22-42 SC-18/22-48

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

list 103 128 139 141 157 187 227 272


UNDERBAR Catalog Section 40

2200 Series Blender Modules see spec sheet EG40.12

bullnose front edge

FEATURES:

• 15A 120V GFCI receptacle supplied for field wiring. • Left- (L) or right-hand (R) models available. • Modular, providing for custom configuration using standard components. • Stainless steel construction. • Front-to-back is 24˝ (610mm). Note:

Stainless steel leg kits available. To order, add $166 per unit and suffix “-SL”. Example: BM50-22R-SL For more stainless steel leg kits, see page 266.

Freight class is 110.0. (•) MTS (made to stock) / ( ) MTO (made to order)

…with 10˝ x 14˝ x 9.5˝ (254 x 356 x 241mm) Sink length weight cubic in. mm lbs. kg feet model # 24˝ 610 44 20.0 9.1 BD24-22R 24˝ 610 44 20.0 9.1 BD24-22L

24˝ width (610mm)

…with 15.5˝ x 19.75˝ x 8˝ (394 x 502 x 203mm) Ice Chest list 1718 1718

24˝ width (610mm)

BD24-22R

BD24-22L

BM3-22L

BM50-22R

length weight cubic in. mm lbs. kg feet model # list 36˝ 914 69 31.3 12.8 BM3-22R 1844 36˝ 914 99 44.9 12.8 BM3-22R-7 * 3859 36˝ 914 69 31.3 12.8 BM3-22L 1844 36˝ 914 99 44.9 12.8 BM3-22L-7 * 3859 50˝ 1270 96 43.6 18.5 BM50-22R ** 2572 50˝ 1270 126 57.2 18.5 BM50-22R-7 * 4235 50˝ 1270 96 43.6 18.5 BM50-22L ** 2572 50˝ 1270 126 57.2 18.5 BM50-22L-7* 4235 50˝ 1270 96 43.6 18.5 BM50L-22R ** 2572 50˝ 1270 126 57.2 18.5 BM50L-22R-7 *** 4235 50˝ 1270 96 43.6 18.5 BM50R-22L ** 2572 50˝ 1270 126 57.2 18.5 BM50R-22L-7 *** 4235 62˝ 1575 110 49.9 22.3 BM62-22R ** 3119 62˝ 1575 146 66.2 22.3 BM62-22R-7 *** 4398 62˝ 1575 110 49.9 22.3 BM62-22L ** 3119 62˝ 1575 146 66.2 22.3 BM62-22L-7*** 4398

* includes 7-circuit post-mix cold plate and 6 legs ** includes 6 legs *** includes 7-circuit post-mix cold plate and 8 legs

BM62-22R

2200 Series Glass Rack Storage Units see spec sheet EG40.21

• Modular, providing for custom configuration using standard components. FEATURES: • Stainless steel construction. Note:

bullnose front edge model #FBGR24-22

For more stainless steel leg kits, see page 266. Note:

model #GR24-22

with Flatboard Top width x length in. mm

cu ft

24˝ x 12˝ 610 x 305 13.5 24˝ x 18˝ 610 x 457 15.6 24˝ x 24˝ 610 x 610 17.7 *231⁄2˝ (597mm) front-to-back.

weight lbs. kg 18 27 37

8.2 12.2 16.8

Stainless steel leg kits available. To order, add $166 per unit and suffix “-SL”. Example: WBGR24-22-SL.

model # FBGR12-22 FBGR18-22 FBGR24-22

Center shelf available for WBGR24-22. To order, add 20% to list and suffix “-CS”. Example: WBGR24-22-CS

Freight class is 100.0. # FBGR24-22

(•) MTS (made to stock) / ( ) MTO (made to order)

with Recessed Worktop weight list lbs. kg model # 1131 18 8.2 WBGR12-22 1189 27 12.2 WBGR18-22 1251 37 16.8 WBGR24-22

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

with Open Top*

weight list lbs. kg 1216 14 6.4 1279 18 8.2 1346 28 12.7

model # GR12-22 GR18-22 GR24-22

list 894 940 989

261


UNDERBAR Catalog Section 40

2200 Series Workboards see spec sheet EG40.13 FEATURES:

• Embossed drain surface for ease of draining. • Modular, providing for custom configuration using standard components. • Stainless steel construction • Front-to-back is 24˝ (610mm). Note:

bullnose front edge

Stainless steel leg kits available. To order, add $166 per unit ($249 per unit for models requiring six legs; $332 per unit for models requiring eight legs) and suffix “-SL”. Example: WB2-22-SL For more stainless steel leg kits, see page 266.

Freight class is 110.0. (•) MTS (made to stock) / ( ) MTO (made to order)

WB2-22

24˝ width (610mm)

length in. mm

weight lbs. kg

24˝ 36˝ 48˝

27 56 58

610 914 1219

12.2 25.4 26.3

cubic feet model # 9.1 WB2-22 12.8 WB3-22 14.1 WB4-22

list 766 971 1198

WB3-22

WB4-22

• Nominal 4˝ (102mm) wide steps. • Modular, providing for custom configuration using standard components. • Stainless steel construction • Front-to-back is 231⁄2˝ (597mm).

2200 Series Liquor Display Unit see spec sheet EG40.22

FEATURES: Note:

Stainless steel leg kits available. To order, add $166 per unit ($249 per unit for models requiring six legs; $332 per unit for models requiring eight legs) and suffix “-SL”. Example: LD24-22-SL For more stainless steel leg kits, see page 266.

Freight class is 110.0. width x length in. mm 231⁄2˝ x 24˝

597x 610

weight lbs. kg 48

21.8

cubic feet model # 9.1 LD24-22

(•) MTS (made to stock) / ( ) MTO (made to order)

list 1156

2200 Series Lower-Tier Liquor Display Unit see spec sheet EG40.22 FEATURES:

• Steps are lower for more underbar clearance. • Modular, providing for custom configuration using standard components. • Stainless steel construction • Front-to-back is 231⁄2˝ (597mm). Note:

Stainless steel leg kits available. To order, add $166 per unit ($249 per unit for models requiring six legs; $332 per unit for models requiring eight legs) and suffix “-SL”. Example: LLD24-22-SL For more stainless steel leg kits, see page 266.

Freight class is 110.0. width x length in. mm 23 ⁄2˝ x 24˝ 1

262

597 x 610

weight lbs. kg 48

21.8

cubic feet model # 7.7 LLD24-22

list 1266

(•) MTS (made to stock) / ( ) MTO (made to order)

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


UNDERBAR Catalog Section 40

Modular Angle Fillers see spec sheets

EG40.57

EG40.58

FEATURES:

• Joins two 1800 or 2200 units by the corners. • Front and rear fillers available in angles of 30˚, 45˚, 60˚, and 90˚. Freight class is 100.0. (•) MTS (made to stock) / ( ) MTO (made to order)

description 30˚ angle

rear angle filler

rear filler angles

45˚ angle 60˚ angle 90˚ angle

front angle filler

front filler angles

weight

cubic

lbs. kg 15 6.8 16 7.3 16 7.3 17 7.7 19 8.6 20 9.0 21 9.5 22 10.0

feet 2.7 2.9 2.8 3.0 3.2 3.5 3.9 4.2

Corner Drainboards see spec sheets

EG40.57

EG40.58

FEATURES:

FRONT

REAR

model #

list

model #

MF30-18 MF30-22 MF45-18 MF45-22 MF60-18 MF60-22 MF90-18 MF90-22

628 653 628 653 628 620 628 653

MR30-18 MR30-22 MR45-18 MR45-22 MR60-18 MR60-22 MR90-18 MR90-22

list

628 653 628 653 628 620 628 653

• Joins two 1800 or 2200 units by the corners. • Provided with one 15⁄8˝ (41mm) leg. • All units have predrilled mounting holes. Freight class is 100.0. (•) MTS (made to stock) / ( ) MTO (made to order)

front corner drainboard rear corner drainboard

weight cubic FRONT REAR lbs. kg feet model # list model # list 37 16.8 3.7 MFC-18 807 MRC-18 807 42 19.1 4.2 MFC-22 807 MRC-22 807

Modular Add-On Service Units— Hand Sinks see spec sheet

EG40.59

FEATURES:

• • • •

Predrilled mounting holes. Standard faucets. Basket drain. Tubular legs.

Note:

bullnose front edge

Stainless steel leg kits available. To order, add $166 and suffix “-SL”. Example: MA2-22-SL For more stainless steel leg kits, see page 266.

Freight class is 110.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Suffix “-18” indicate modular add-ons that fit 1800 series units. Suffix “-22” indicate modular add-ons that fit 2200 series units.

description hand sink

width x length in. mm 20˝ x 12˝ 24˝ x 12˝

508 x 305 610 x 305

weight lbs. kg 26 34

cu ft model #

list

MA2-18 • MA2-22

646 695

11.8 6.4 15.4 6.4

model # MA2-18

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

263


UNDERBAR Catalog Section 40

Modular Add-On Service Units— Stepdown Units see spec sheets EG40.60A EG40.60B FEATURES:

• • • • •

Predrilled mounting holes. 120-volt 20-amp GFCI duplex receptacle. Standard faucets. Basket drain. Tubular legs.

Note:

Stainless steel leg kits available. To order, add $166 and suffix “-SL”. Example: MA1-22-SL For more stainless steel leg kits, see page 266.

Freight class is 110.0. (•) MTS (made to stock) / ( ) MTO (made to order)

single

width x length in. mm

double

description single step-down units liquid waste step-down units double step-down units sink, step-down units

liquid waste

sink

191⁄2˝ x 12˝ 231⁄2˝ x 12˝ 191⁄2˝ x 12˝ 231⁄2˝ x 12˝ 191⁄2˝ x 18˝ 231⁄2˝ x 18˝ 191⁄2˝ x 18˝ 231⁄2˝ x 18˝

weight lbs. kg

495 x 305 597 x 305 495 x 305 597 x 305 495 x 457 597 x 457 495 x 457 597 x 457

15 16 17 21 20 22 35 37

6.8 7.3 7.7 9.5 9.0 10.1 15.9 16.8

cu ft 6.4 6.4 6.4 6.4 3.3 3.5 3.3 3.5

model # MA1-18 MA1-22 MA4-18 MA4-22 MA6-18 MA6-22 MA7-18 • MA7-22 •

list 543 576 674 713 511 542 839 821

Suffix “-18” indicate modular add-ons that fit 1800 series units. Suffix “-22” indicate modular add-ons that fit 2200 series units.

Modular Add-On Service Units— Fillers, Storage Units, and Workboards see spec sheets EG40.61A EG40.61B

FEATURES:

• • • •

Predrilled mounting holes. Standard faucets. Basket drain. Tubular legs.

Note:

bullnose front edge

Stainless steel leg kits available. To order, add $166 and suffix “-SL”. Example: TCS6-18-SL For more stainless steel leg kits, see page 266.

Freight class is 110.0. (•) MTS (made to stock) / ( ) MTO (made to order)

filler with tube chase

Suffix “-18” indicate modular add-ons that fit 1800 series units. Suffix “-22” indicate modular add-ons that fit 2200 series units.

bottle storage unit

description fillers with tube chase bottle storage units insulated bottle storage units

storage base unit storage base units (slides underneath underbar)

workboard

264

workboards

width x length in. mm 19˝ x 6˝ 23˝ x 6˝ 20˝ x 12˝ 24˝ x 12˝ 20˝ x 12˝ 24˝ x 12˝ 191⁄2˝ x 12˝ 231⁄2˝ x 12˝ 191⁄2˝ x 18˝ 231⁄2˝ x 18˝ 20˝ x 12˝ 24˝ x 12˝

483 x 152 584 x 152 508 x 305 610 x 305 508 x 305 610 x 305 495 x 305 597 x 305 495 x 457 597 x 457 508 x 305 610 x 305

weight lbs. kg 18 20 17 21 32 37 26 30 37 41 21 22

8.2 9.0 7.7 9.5 14.5 16.8 11.8 13.6 16.8 18.6 9.5 10.0

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

cu ft model # 4.2 TCS6-18 5.6 TCS6-22 6.4 MA5-18 6.4 MA5-22 6.4 MA5I-18 6.4 MA5I-22 6.4 MAB12-18 6.4 MAB12-22 6.4 MAB18-18 6.4 MAB18-22 6.4 MAWB12-18 6.4 MAWB12-22

list 547 577 568 601 802 859 634 684 735 794 453 485


UNDERBAR Catalog Section 40

Pass-Thru Ice Chests see spec sheet

EG40.16

FEATURES:

• For 1800 and 2200 Series. • Sliding cover. Note:

bullnose front edge side-to-side x front-to-back in. mm 18˝ x 36˝

Stainless steel legs, add suffix “-SL” and $166 to list price of unit. For more stainless steel leg kits, see page 266.

Freight class is 100.0. (•) MTS (made to stock) / ( ) MTO (made to order)

weight lbs. kg

457 x 914

70 31.8 106 48.1 24˝ x 36˝ 610 x 914 85 38.6 121 54.9 * 7-circuit post-mix cold plate included

cubic feet model # 10.0 B18ICPT * 12.8 B18ICPT-7 13.5 B24ICPT * 13.5 B24ICPT-7

list 2056 3937 2162 3840

Accessories/Replacements

Can be shipped UPS.

see spec sheet

EG40.56

(•) MTS (made to stock) / ( ) MTO (made to order)

#303365 standard faucet #313302 T&S faucet

Standard Faucet

T&S Faucet

With 4˝ (102mm) centers. description standard, splash mount, 4˝ (102mm) centers, 10˝ (254mm) spout

With 4˝ (102mm) centers. model #

list each

303365

160

model # 303975

list each 91

description T&S, splash mount, 4˝ (102mm) centers, 10˝ (254mm) spout

model #

list each

313302

542

Faucet Repair Kit Fits faucet #303365. description includes two stems, two seats, two handles, bonnet nuts & washers

nickel-plated

mini crumb cup drain

Drains

P-Trap description

overflow pipe

model # 300789

list 83

description 11⁄2˝ (38mm) drain only, for underbar sinks 11⁄2˝ (38mm) overflow pipes only mini crumb cup PVC tail piece for ice chest drains lock nut for 11⁄2˝ (38mm) drains 1 ⁄2˝ x 4˝ (13 x 102mm) nipple drain for 7-circuit post-mix cold plate

model # 300886 *

list each 12

300887 300966 350037 * 300889 312007

23 5 8 3 5

* #350037 and 300886 not to be used with units containing 7-circuit post-mix cold plate

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

265


UNDERBAR Catalog Section 40

Accessories/Replacements

Can be shipped UPS.

see spec sheet

EG40.56

(•) MTS (made to stock) / ( ) MTO (made to order)

Speed Rails Made for liter-size bottles.

Single-Tier, Keyhole

Double-Tier, Keyhole

47⁄16˝ (113mm) wide.

87⁄8 (225mm) wide.

length number of weight in. mm keyholes lbs. kg

cu ft

22˝ 34˝ 46˝ 58˝ 70˝

0.5 0.7 0.9 1.2 1.4

559 864 1168 1473 1778

2 3 3 3 3

4 7 8 10 12

1.8 3.2 3.6 4.5 5.4

model # 500778 • 500779 • 500780 • 502956 • 501045 •

list 95 120 155 185 218

weight lbs. kg 18 27 31 36 40

8.2 12.2 14.1 16.1 18.1

cu ft model # 2.1 501883 • 3.2 501884 • 4.2 501885 • 5.3 502957 6.3 501886 •

single-tier speed rail

list 180 240 316 396 475

double-tier speed rail

Optional Hanging Straps for Speed Rails When ordering, order number of straps per number of holes on speed rail. Not recommended for speed rails over 60˝ (1524mm) in length. model # 300708

list each 17

bottle opener

Miscellaneous description Lexan® ice cover for 2200 Series ice chest B28IC cocktail rack; 153⁄8˝ x 193⁄4˝ (391 x 502mm) bowl bottle holder—plastic, single bottle holder tray—holds 4 bottles bottle opener cap catcher

Optional Stainless Steel Leg Kits... description stainless steel (s/s) legs s/s legs & s/s feet s/s legs & s/s gussets * s/s legs, s/s feet & s/s gussets *

add suffix # -SL -SLF -SLG -SLGF

model # 700001 300325 300491 300805 300713 300819

bottle holder

list each 372 136 36 66 57 57

...for units requiring 4 legs list per unit 166 234 294 362

bottle holder tray

...for units requiring 6 legs list per unit 249 351 441 543

...for units requiring 8 legs list per unit 332 468 588 724

* Does not apply to Glass Rack Storage Units (pages 255 and 261).

266

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

cap catcher


UNDERBAR Catalog Section 40

Custom Underbar — 1800 and 2200 Series see spec sheet EG40.55

For 1800 Series

#303365 E62 E69

See pages 337-340 for more custom options and accesories.

E70

E77

double speed rail

E73

E67

E62A

#303365 E64

E80

#303365 E79

For 2200 Series

#300713 & 300819 E66

1800 2200 Series Series list list price price 328 398

model # description E60 Workboards (minimum 4´0˝) per linear foot Sinks: E61 - hand sink 10˝ x 14˝ x 5˝ w/drain faucet 306 306 358 358 E61A - sink bowl 10˝ x 14˝ x 91⁄2˝ w/drain, faucet & overflow E61B - sink bowl 12˝ x 14˝ x 91⁄2˝ w/drain, faucet & overflow 445 445 Cocktail units 151⁄2˝ x 193⁄4˝ bowls: E62 - 24˝ unit, 6 bottle wells, inside liner, no cover 1227 1347 E62A - 36˝ unit, 8 bottle wells, outside liner, sliding s/s cover 1616 1736 E63 Ice chest 151⁄2˝ x 193⁄4˝ x 8˝ deep 1572 1937 E64 Ice chest w/sliding s/s cover 151⁄2˝ x 193⁄4˝ x 8˝ deep 1201 1321 E65 Higher backsplash up to 9˝ high per linear foot 96 96 Blender step unit w/liquid waste chute, faucet, electrical outlet: E66 - 12˝ wide single station 1154 1338 E66A - 14˝ wide double station 1242 1421 E67 Blender recess 12˝ (305mm) wide with electrical GFCI outlets 837 923 E68 Open waste chute installed 373 373 E69 Liquid waste chute installed 448 448 E70 Glass filler 308 308 E71 Cutout in back (2200 Series only) 1294 E72 End splash per end 523 562 E73 “L” shape corner welded per corner (except sink bowls) price upon application E74 Pass-thru 685 815 E75 Blender shelf 12˝ wide, removable hook-on type 377 377

model # 300712 300670 300325 300491 300805 326636 303365 E76 300713 300819 E77 359032 E78 E79 E80 E80A E81 300293

description Towel bar, 24˝ (610mm)-long, stainless steel - shipped loose Sliding s/s ice cover for 151⁄2˝ x 193⁄4˝ bowl (non NSF) Rack for round bottle wells Bottle holder, individual Bottle holder trays (not installed) hold 4 bottles each Poly cutting board 15˝ x 15˝ x 1⁄2˝ (not attached) poly-plastic Faucet - 10˝ spout, splash mount Divider for ice chest (removable), installed at factory - Bottle opener and - Cap catcher (not attached) Duplex GFCI receptacle, installed Post-mix cold plate for 151⁄2˝ x 193⁄4˝ bowl, 7-circuit, sealed-in (NSF) Glass rack storage, holds (2) 20˝ x 20˝ racks Continuous water waste Pass-thru ice chests: - 18˝ x 36˝ x 8˝ - 24˝ x 36˝ x 8˝ Stainless steel leg, each Plastic bullet foot, each

E83

NSF sprayed-on latex sound deadening, up to 12´(3658mm) length - for each additional foot Modular Add-on Fillers and Corner Drainboards—front and rear sections Double speed rail

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

1800 2200 Series Series list list price price 84 84 374 374 136 136 36 36 66 66 148 148 160 160 333 333 114 114 (both) (both) 288 288 1419 1419 1240 1240 668 668 2359 2662 69 2

2359 2662 9 2

596

596

49 49 see page 263 for models and list prices see page 266 for models and list prices

267


®

Spec-Bar

Modular Underbar Equipment The most flexible design in stainless steel underbar equipment that allows you to customize your specifications with simple modular design for easy installation. You can have it all! – The convenience of one-stop-shopping for all your equipment needs, design assistance through EAGLE’s SpecFAB® division, and the elegance of brass, hardwoods, Corian® and stylish laminates.

All this is yours, with the assurance of impeccable quality and workmanship. EAGLE Advantages Include: • • • • •

Stainless steel construction. Decorative solid brass and chrome rails and fittings available. Classic Corian® design (optional) lends natural tones and rich textures to your unit. Laminates available are in the hundreds, making the possibilities virtually endless. The solid elegance of walnut, oak, cherry, maple, red oak, and mahogany bar panels makes your Spec-Bar® blend in to any decor.

Step Up To The Bar…


UNDERBAR Catalog Section 40

Spec-Bar® Standard Ice Chests see spec sheet EG40.17

two-piece sliding cover FEATURES:

Note: Post-mix cold plates available. To order 8-circuit post-mix cold plate, add $1830 to list price (to fit all models, except otherwise noted) and add suffix “-8” to model number. To order 2-circuit post-mix cold plate, add $1042 to list price (to fit all models, except otherwise noted) and add suffix “-2” to model number. Example: B24IC-19-8. To order NEW 10-circuit post-mix cold plate, add $1830 to list price and add suffix “-10” to model number. Example: B24IC-19-10. Extra deep ice chests available. 141⁄2˝ (368mm) deep. To order, add $212 to list price and replace “IC-” in model number with “ICD-”. Example: B48ICD-19. Sliding covers included.

20 gauge type 304 stainless steel.

length in. mm 12˝ 18˝ 19˝ 24˝ width 30˝ (483mm) 36˝ 42˝ 48˝ 12˝ 18˝ 24˝ 24˝ width 30˝ (610mm) 36˝ 42˝ 48˝

305 457 610 762 914 1067 1219 305 457 610 762 914 1067 1219

weight lbs. kg 30 37 50 70 80 90 100 35 40 60 75 85 90 100

13.6 16.8 22.7 31.8 36.3 40.8 45.4 15.9 18.1 27.2 34.0 36.3 40.8 45.4

cubic capacity feet lbs. kg 5.3 7.3 9.3 11.3 13.3 15.3 17.3 6.5 8.9 11.2 13.8 16.2 18.6 21.1

34 50 67 84 101 117 134 43 64 85 106 127 149 170

15.2 22.8 30.4 38.0 45.6 53.2 30.7 19.3 28.9 38.5 48.2 57.8 67.4 77.7

model # B12IC-19 * B18IC-19 * B24IC-19 B30IC-19 B36IC-19 B42IC-19 B48IC-19 B12IC-24 * B18IC-24 ** B24IC-24 B30IC-24 B36IC-24 B42IC-24 B48IC-24

list 1018 1175 1332 1487 1642 1800 1956 1168 1339 1512 1682 1855 2025 2199

Freight class is 110.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Replacement Ice Bin Covers see spec sheet for ice chest 19˝ width length in. mm model # list 12˝ 305 IC3-12 61 18˝ 457 IC3-18 67 24˝ 610 IC3-24 76 30˝ 762 IC3-30 83 36˝ 914 IC3-36 91 42˝ 1067 IC3-42 99 48˝ 1219 IC3-48 106

* There are no optional cold plates available for these models. ** For B18IC-24, only an optional 2-circuit post-mix cold plate is available.

Spec-Bar® Bottle Racks for Standard Ice Chests see spec sheet width weight cubic bottle in. mm lbs. kg feet capacity 19˝ 19˝ 19˝ 19˝ 19˝ 19˝ 19˝ 19˝ 24˝ 24˝ 24˝ 24˝ 24˝ 24˝ 24˝ 24˝

483 483 483 483 483 483 483 483 610 610 610 610 610 610 610 610

2 4 6 8 10 12 14 16 2 4 6 8 10 12 14 16

0.9 1.8 1.8 1.8 1.8 1.8 1.8 1.8 0.9 1.8 1.8 1.8 1.8 1.8 1.8 1.8

0.6 1.0 1.0 1.0 1.0 1.0 1.0 1.0 0.7 1.0 1.0 1.0 1.0 1.0 1.0 1.0

3 6 6 6 6 6 6 6 4 8 8 8 8 8 8 8

model # BR3-19 BR6-12-19 BR6-18-19 BR6-24-19 BR6-30-19 BR6-36-19 BR6-42-19 BR6-48-19 BR4-24 BR8-12-24 BR8-18-24 BR8-24-24 BR8-30-24 BR8-36-24 BR8-42-24 BR8-48-24

EG40.23 list 128 218 218 218 218 218 218 218 151 252 252 252 252 252 252 252

• Body and crossbracing made of type 304 stainless steel. • 101⁄2˝ (267mm) deep ice bin with foamed-in-place insulation. • Removable stainless steel cover. • Stainless steel adjustable bullet feet. • Non-metallic breaker strip to prevent heat transfer to ice bin. • 37˝ (940mm) overall height.

FEATURES:

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

EG40.23

for ice chest 24˝ width length in. mm model # list 12˝ 305 IC4-12 65 18˝ 457 IC4-18 75 24˝ 610 IC4-24 84 30˝ 762 IC4-30 95 36˝ 914 IC4-36 104 42˝ 1067 IC4-42 114 48˝ 1219 IC4-48 124

• One or two 3-bottle or 4-bottle configured vinyl-coated wire racks. • Divider walls are 20 gauge type 304 stainless steel. Freight class is 110.0. (•) MTS (made to stock) / ( ) MTO (made to order)

bottle rack with 4-bottle capacity

269


UNDERBAR Catalog Section 40

Spec-Bar® Combination Ice Chests see spec sheet EG40.19

FEATURES:

…with Bottle Rack on Both Sides overall length in. mm

19˝ width

48˝ 54˝ (483mm) 60˝ 24˝ 48˝ width 54˝ (610mm) 60˝

1219 1372 1524 1219 1372 1524

ice bin width x length in. mm 15˝ x 23˝ 15˝ x 29˝ 15˝ x 35˝ 20˝ x 23˝ 20˝ x 29˝ 20˝ x 35˝

381 x 584 381 x 737 381 x 889 508 x 584 508 x 737 508 x 889

weight lbs. kg 93 106 119 101 114 127

42.2 48.1 53.9 45.8 51.7 57.6

ice cu capacity ft lbs. kg model # 17.3 67 30.4 BCT48-19 19.3 84 38.0 BCT54-19 21.3 100 45.6 BCT60-19 19.8 85 38.5 BCT48-24 21.8 106 48.2 BCT54-24 23.8 127 54.8 BCT60-24

list 2975 3136 3292 3457 3627 3801

• Bottle compartment and ice bin, each with separate insulation and drains. • Rectangle openings provided in backsplash for tubing. • Units available with bottle rack on left or right or both sides. • Body and crossbracing made of type 304 stainless steel. • 101⁄2˝ (267mm) deep ice bin with foamed-in-place insulation. • Removable stainless steel cover. • Stainless steel adjustable bullet feet. • Non-metallic breaker strip to prevent heat transfer to ice bin. • 365⁄8˝ (930mm) overall height. Note: Post-mix cold plates available. To order 8-circuit post-mix cold plate, add $1830 to list price (to fit all models, except otherwise noted) and add suffix “-8” to model number. To order 2-circuit post-mix cold plate, add $1042 to list price (to fit all models, except otherwise noted) and add suffix “-2” to model number. Example: BCT36R-19-2. To order NEW 10-circuit post-mix cold plate, add $1830 to list price and add suffix “-10” to model number. Example: BCT36R-19-10. Extra deep ice chests available. 141⁄2˝ (368mm) deep. To order, add $212 to list price and replace “-” in model number with “D-”. Example: BCT48RD-24.

Freight class is 110.0. (•) MTS (made to stock) / ( ) MTO (made to order)

…with Bottle Rack on One Side overall length in. mm 24˝ 30˝ 36˝ (483mm) 42˝ 48˝ 30˝ 24˝ 36˝ width 42˝ (610mm) 48˝

19˝ width

610 762 914 1067 1219 762 914 1067 1219

ice bin width x length in. mm 15˝ x 11˝ 15˝ x 17˝ 15˝ x 23˝ 15˝ x 29˝ 15˝ x 35˝ 20˝ x 17˝ 20˝ x 23˝ 20˝ x 29˝ 20˝ x 35˝

381 x 279 381 x 432 381 x 584 381 x 737 381 x 889 508 x 432 508 x 584 508 x 737 508 x 889

weight lbs. kg 44 67 80 93 106 72 85 98 111

20.0 30.4 36.3 42.2 48.1 32.7 38.6 44.5 50.3

ice bottle rack cu capacity on left ft lbs. kg model # list 9.3 40 18.1 BCT24L-19* 1859 11.3 50 22.8 BCT30L-19* 2018 13.3 67 30.4 BCT36L-19 2174 15.3 84 38.0 BCT42L-19 2331 17.3 100 45.6 BCT48L-19 2496 13.8 64 28.9 BCT30L-24* 2316 15.8 85 38.5 BCT36L-24 2487 17.8 106 48.2 BCT42L-24 2659 19.5 127 54.8 BCT48L-24 2832

bottle rack on right model # list BCT24R-19 * 1859 BCT30R-19 * 2018 BCT36R-19 2174 BCT42R-19 2331 BCT48R-19 2496 BCT30R-24 * 2316 BCT36R-24 2487 BCT42R-24 2659 BCT48R-24 2690

* There are no optional post-mix cold plates available for these models.

The EAGLE Advantage

HAVE YOU PROFITED TODAY? EAGLE's SpecFAB® Division was formed to fill the gap between ready-made standard equipment and high-cost, "wish-and-wait" highly customized equipment. With SpecFAB®, you get quality custom equipment, built to your specifications and delivered to you fast - at affordable prices. To learn more about what EAGLE’s SpecFAB® Division can do for you see pages 341-348 or

visit us at www.eaglegrp.com

270

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


UNDERBAR Catalog Section 40

Spec-Bar® Drop-In Ice Chests

• 101⁄2˝ (267mm) depth. • Body and crossbracing made of type 304 stainless steel. • 101⁄2˝ (267mm) deep ice bin with foamed-in-place insulation. • Removable stainless steel sliding cover. • Stainless steel adjustable bullet feet. • Non-metallic breaker strip to prevent heat transfer to ice bin. FEATURES:

see spec sheet EG40.20

overall width x length in. mm 18˝ x 24˝ 24˝ x 18˝ 20˝ x 30˝ 30˝ x 20˝

457 x 610 610 x 457 508 x 762 762 x 508

cut-out dimensions ice cube width x length weight cubic capacity in. mm lbs. kg feet lbs. kg model # list 161⁄4˝ x 221⁄4˝ 413 x 565 80 36.3 3.8 72 32.7 DIC1420 • 1228 221⁄4˝ x 161⁄4˝ 565 x 413 80 36.3 3.8 72 32.7 DIC2014 1228 181⁄4˝ x 281⁄4˝ 464 x 718 122 55.3 5.0 121 54.9 DIC1626 1551 281⁄4˝ x 181⁄4˝ 718 x 464 122 55.3 5.0 121 54.9 DIC2616 1551

Optional Post-Mix Cold Plates: #DIC1420 and DIC2014 can accept 2-circuit post-mix cold plate only. #DIC1626 and DIC2616 can accept 2-, 8-, or 10-circuit post-mix cold plates.

Note: To order 8-circuit post-mix cold plate, add $1830 to list price (to fit all models, except otherwise noted) and add suffix “-8” to model number. To order 2-circuit post-mix cold plate, add $1042 to list price and add suffix “-2” to model number. Example: DIC1420-2. To order NEW 10-circuit post-mix cold plate, add $1830 to list price and add suffix “-10” to model number. Example: DIC1626-10.

Freight class is 110.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Spec-Bar® Pass Thru Ice Chest see spec sheet EG40.18

FEATURES:

• Body and crossbracing made of type 304 stainless steel. • 101⁄2˝ (267mm) deep ice bin with foamed-in-place insulation. • Removable stainless steel sliding cover. • Stainless steel adjustable bullet feet. • Non-metallic breaker strip to prevent heat transfer to ice bin. • 293⁄16˝ (741mm) overall height. Note: To order 8-circuit post-mix cold plate, add $1830 to list price and add suffix “-8” to model number.

overall width x length in. mm 36˝ x 24˝

914 x 610

To order 2-circuit post-mix cold plate, add $1042 to list price and add suffix “-2” to model number. Example: B24PTIC-2.

weight lbs. kg 100

45.5

cubic capacity feet lbs. kg 15.8

175

79.4

model # B24PTIC

list 2271

To order NEW 10-circuit post-mix cold plate, add $1830 to list price and add suffix “-10” to model number. Example: B24PTIC-10.

Freight class is 110.0. (•) MTS (made to stock) / ( ) MTO (made to order) Custom ®

Spec-Bar Modular Bar Die see spec sheet

Freight class is 110.0. EG40.45

• • • •

Flexibility of freestanding equipment in one easy unit. Stone gray color, unless specified. Available in flat wall style and pedestal base style. Built-in chaseways for beverage, electrical and plumbing lines. • Duplex outlets and dispenser access holes as requested.

(•) MTS (made to stock) / ( ) MTO (made to order)

• On pedestal base style, equipment is mounted onto die before shipping. Arrives pre-assembled from factory in sections for easy installation. Simply connect sections and secure unit. • Optional factory U.L. wiring and plumbing package.

Call factory for pricing.

pedestal base style shown (note: base shown for display only) 100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

271


UNDERBAR Catalog Section 40

Spec-Bar® Hand Sinks see spec sheet EG40.34

FEATURES:

• 8˝ (203mm) high backsplash, sides, front panel or door, and bowl are 20 gauge stainless steel. • Leg channels, legs, and crossbracing are 16 gauge stainless steel. • 91⁄4˝ x 111⁄2˝ x 6˝ (235 x 292 x 152mm) 20 gauge stainless steel bowls. • T&S faucet. • 11⁄2˝ (38mm) stainless steel I.P.S. threaded drain with nut and washer. • 361⁄2˝ (927mm) overall height. Freight class is 85.0. (•) MTS (made to stock) / ( ) MTO (made to order)

length in. mm

19˝ width

12˝ 18˝ (483mm) 18˝ 12˝ 24˝ 12˝ width 18˝ (610mm) 18˝

305 457 457 305 305 457 457

weight lbs. kg

cu ft

description

30 35 45 35 45 40 50

5.3 8.0 8.0 6.5 6.5 9.0 9.0

w/front panel and deck-mount faucet w/front panel and deck-mount faucet w/front door, soap & towel disp., splash-mt faucet w/front panel and deck-mount faucet w/front door, soap & towel disp., splash-mt faucet w/front panel and deck-mount faucet w/front door, soap & towel disp., splash-mt faucet

13.6 15.9 20.4 15.9 20.4 18.1 22.7

model # HS12-19 • HS18-19 HSD18-19 HS12-24 • HSD12-24 HS18-24 HSD18-24

list 1249 1328 1694 1300 1668 1384 1754

“D” in model number indicates units with front door, soap and paper towel dispensers, and splash mount faucet.

Spec-Bar® Wall Mounted Sinks see spec sheet EG40.35

FEATURES:

• Backsplash, sides, bottom, front panel or door, trim rail, and bowls are 20 gauge stainless steel. • Wall mounting bracket and top drop-in model are 18 gauge stainless steel. • 91⁄4˝ x 111⁄2˝ x 6˝ (235 x 292 x 152mm) 20 gauge stainless steel bowls. • T&S faucet. • 11⁄2˝ (38mm) stainless steel I.P.S. threaded drain with nut and washer. Freight class is 150.0. (•) MTS (made to stock) / ( ) MTO (made to order)

length weight cubic in. mm lbs. kg feet description 14˝ 15˝ 14˝ width 14˝ (381mm) 12˝

356 356 356 305

22 30 25 15

10.0 13.6 11.3 6.8

5.0 5.0 5.0 4.4

w/front panel w/front door & dispensers w/perforated sink strainer drop-in model

model # WS14-15 WSD14-15 WSS14-15 WSSDI12-15

list 928 1297 928 666

The EAGLE Advantage

HAVE YOU PROFITED TODAY? Call Your EAGLE GROUP Representative Now To Place Your Order. 272

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


UNDERBAR Catalog Section 40

Spec-Bar® Two-Compartment Sinks see spec sheet EG40.37

FEATURES:

• 10˝ x 14˝ x 91⁄2˝ (254 x 356 x 241mm) bowls. • Splash mounted T&S faucet • 11⁄2˝ (38mm) I.P.S. threaded drain with nut and washer. • 37˝ (940mm) overall height. Freight class is 150.0. (•) MTS (made to stock) / ( ) MTO (made to order)

width x length in. mm 19˝ x 24˝ 24˝ x 24˝

483 x 610 610 x 610

weight lbs. kg 50 55

22.7 24.9

cubic feet model # 9.3 B2-2-19 11.3 B2-2-24

list 1815 1877

Spec-Bar® Three-Compartment Sinks see spec sheet EG40.38

FEATURES:

• 19˝ (940mm) units feature splash mount T&S faucet with 12˝ (305mm) spout; 24˝ (610mm) units come with double-hinged splash mount T&S faucet. • 10˝ x 14˝ x 91⁄2˝ (254 x 356 x 241mm) bowls. • 11⁄2˝ (38mm) I.P.S. threaded drain with nut and washer. • 37˝ (940mm) overall height. Freight class is 150.0.

3-compartment sink with optional speed rail

(•) MTS (made to stock) / ( ) MTO (made to order)

…with One Drainboard (except where noted) overall drainboard(s) length length weight in. mm in. mm lbs. kg 36˝ 48˝ 60˝ (483mm) 66˝ 72˝ 36˝ 24˝ 48˝ width 60˝ (610mm) 66˝ 72˝

19˝ width

914 1219 1524 1676 1829 914 1224 1524 1676 1829

n/a 12˝ 24˝ 30˝ 36˝ n/a 12˝ 24˝ 30˝ 36˝

n/a 305 610 762 914 n/a 305 610 762 914

60 70 80 85 90 65 75 85 90 95

27.2 31.8 36.3 38.6 40.8 29.5 34.0 38.6 40.8 43.1

cu ft 13.3 17.3 21.3 23.3 25.3 16.2 21.1 25.9 28.4 30.8

DRAINBOARD ON LEFT model # list B3-3-19 * 2284 B4-3-L-19 2535 B5-3-L-19 2721 B5.5-3-L-19 2815 B6-3-L-19 2972 B3-3-24 * 2355 B4-3-L-24 2628 B5-3-L-24 2846 B5.5-3-L-24 2958 B6-3-L-24 3121

DRAINBOARD ON RIGHT model # list n/a n/a B4-3-R-19 2535 B5-3-R-19 2721 B5.5-3-R-19 2815 B6-3-R-19 2972 n/a n/a B4-3-R-24 2628 B5-3-R-24 2846 B5.5-3-R-24 2958 B6-3-R-24 3121

* These models do not have drainboards.

…with Two Drainboards - shipped wood-crated. overall drainboard(s) length length weight in. mm in. mm lbs. kg

19˝ 60˝ 72˝ width 84˝ (483mm) 96˝ 24˝ 60˝ 72˝ width 84˝ (610mm) 96˝

1524 1829 2134 2438 1524 1829 2134 2438

12˝ 18˝ 24˝ 30˝ 12˝ 18˝ 24˝ 30˝

305 457 610 762 305 457 610 762

180 81.7 190 86.2 205 92.9 220 99.8 185 83.9 195 88.5 210 95.3 225 102.1

cu ft 21.3 25.3 29.3 33.3 25.9 30.8 35.7 40.5

model # B5-3-LR-19 B6-3-LR-19 B7-3-LR-19 B8-3-LR-19 B5-3-LR-24 B6-3-LR-24 B7-3-LR-24 B8-3-LR-24

list 2785 2972 3160 3346 2900 3121 3340 3557

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

273


UNDERBAR Catalog Section 40

Spec-Bar® Four-Compartment Sinks see spec sheet EG40.39

FEATURES:

• Double-hinged splash mount T&S faucet. • 10˝ x 14˝ x 91⁄2˝ (254 x 356 x 241mm) bowls. • 11⁄2˝ (38mm) I.P.S. threaded drain with nut and washer. • 37˝ (940mm) overall height. Freight class is 150.0. (•) MTS (made to stock) / ( ) MTO (made to order)

…with One Drainboard (except where noted) overall drainboard(s) length length weight in. mm in. mm lbs. kg 48˝ 1219 n/a n/a 70 60˝ 1524 12˝ 305 80 66˝ 1676 18˝ 457 85 (483mm) 72˝ 1829 24˝ 610 90 48˝ 1224 n/a n/a 75 24˝ 60˝ 1524 12˝ 305 85 width 66˝ 1676 18˝ 457 90 (610mm) 72˝ 1829 24˝ 610 95 * These models do not have drainboards.

31.8 36.3 38.6 40.8 34.0 38.6 40.8 43.1

19˝ width

cu ft 17.3 21.3 23.3 25.3 21.1 25.9 28.4 30.8

DRAINBOARD ON LEFT model # list B4-4-19 * 2832 B5L-4-19 3082 B5.5L-4-19 3175 B6L-4-19 3267 B4-4-24 * 2940 B5L-4-24 3214 B5.5L-4-24 3323 B6L-4-24 3433

DRAINBOARD ON RIGHT model # list n/a n/a B5R-4-19 3082 B5.5R-4-19 3175 B6R-4-19 3267 n/a n/a B5R-4-24 3214 B5.5R-4-24 3323 B6R-4-24 3433

…with Two Drainboards overall drainboard(s) length length weight in. mm in. mm lbs. kg

19˝ width

72˝ 84˝ (483mm) 96˝ 24˝ 72˝ width 84˝ (610mm) 96˝

1829 2134 2438 1829 2134 2438

12˝ 18˝ 24˝ 12˝ 18˝ 24˝

305 457 610 305 457 610

90 105 120 95 110 125

40.8 47.6 54.4 43.1 49.9 56.7

cu ft 25.3 29.3 33.3 30.8 35.7 40.5

model # B6RL-4-19 B7RL-4-19 B8RL-4-19 B6RL-4-24 B7RL-4-24 B8RL-4-24

list 3332 3521 3706 3487 3706 3729

Optional Scrap Basket For 10˝ x 14˝ bowls (254 x 356mm). model # SB1014

Spec-Bar® Wet Waste Sinks see spec sheet EG40.36

FEATURES:

list 163

• For chemical storage or disposal. • T&S faucet and perforated pan. • 91⁄4˝ x 111⁄2˝ x 6˝ (235 x 292 x 152mm) 20 gauge stainless steel bowls. • 11⁄2˝ (38mm) stainless steel I.P.S. threaded drain with nut and washer. • 365⁄8˝ (930mm) overall height. Freight class is 150.0. (•) MTS (made to stock) / ( ) MTO (made to order)

length weight in. mm lbs. kg

19˝ width (483mm)

24˝ width (610mm)

12˝ 18˝ 12˝ 12˝ 18˝ 18˝

305 457 305 305 457 457

32 35 37 40 42 40

14.5 15.9 16.8 18.1 19.1 18.1

cu ft 5.3 8.0 6.5 10.1 9.0 13.1

description w/front panel w/front panel w/front panel w/front door, holds (3) 1-gal. containers w/front panel w/dry waste chute

model # WS12-19 WS18-19 WS12-24 WSC12-24* WS18-24 WSW18-24

* #WSC12-24 is a cabinet-style unit

274

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

list 1228 1306 1279 1740 1364 1924


UNDERBAR Catalog Section 40

Spec-Bar® Standard Workboards

• • • •

see spec sheet EG40.27 length in. mm 12˝ 18˝ 19˝ 24˝ width 30˝ (483mm) 36˝ 42˝ 48˝ 12˝ 18˝ 24˝ 24˝ width 30˝ (610mm) 36˝ 42˝ 48˝

305 457 610 762 914 1067 1219 305 457 610 762 914 1067 1219

weight lbs. kg 25 30 35 40 45 50 55 27 32 37 42 47 52 57

11.3 13.6 15.9 18.1 20.4 22.7 24.9 12.2 14.5 16.8 19.1 21.3 23.6 25.6

cubic feet model # 5.3 WB12-19 7.3 WB18-19 9.3 WB24-19 11.3 WB30-19 13.3 WB36-19 15.3 WB42-19 17.3 WB48-19 6.5 WB12-24 8.9 WB18-24 11.3 WB24-24 13.8 WB30-24 16.2 WB36-24 18.6 WB42-24 21.1 WB48-24

list 666 742 823 902 978 1057 1136 742 823 902 978 1057 1136 1214

FEATURES:

Type 304 stainless steel construction. Adjustable stainless steel bullet feet. Perforated stainless steel insert. 11⁄2˝ (38mm) I.P.S. threaded drain with nut and washer. • 37˝ (940mm) overall height. Freight class is 100.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Spec-Bar® Recessed Workboards see spec sheet

• • • •

Type 304 stainless steel construction. Adjustable stainless steel bullet feet. Perforated stainless steel insert. 11⁄2˝ (38mm) I.P.S. threaded drain with nut and washer. • 37˝ (940mm) overall height.

EG40.28

cutout aligns with speed rail of other equipment

FEATURES: Freight class is 100.0. (•) MTS (made to stock) / ( ) MTO (made to order)

24˝ (610mm) RDBSR

29˝ (737mm) RDBDR

24˝ (610mm) RDB

29˝ (737mm) RDBSR

…designed to align with single speed rail adjoined to Spec-Bar® 19˝ (483mm) wide equipment.

24˝ width (610mm)

length in. mm

weight lbs. kg

12˝ 18˝ 24˝ 30˝ 36˝

25 30 35 40 45

305 457 610 762 914

11.3 13.6 15.9 18.1 20.4

cubic feet model # list 6.5 RDBSR12-19 742 8.9 RDBSR18-19 823 11.3 RDBSR24-19 902 13.8 RDBSR30-19 978 16.2 RDBSR36-19 1057

…designed to align with Spec-Bar® 24˝ (610mm) wide equipment with no speed rail.

24˝ width (610mm)

length in. mm

weight lbs. kg

12˝ 18˝ 24˝ 30˝ 36˝

25 30 35 40 45

305 457 610 762 914

11.3 13.6 15.9 18.1 20.4

cubic feet model # 6.5 RDB12-24 8.9 RDB18-24 11.3 RDB24-24 13.8 RDB30-24 16.2 RDB36-24

list 742 823 902 978 1004

…designed to align with double speed rail adjoined to Spec-Bar® 19˝ (483mm) wide equipment.

29˝ width (737mm)

length in. mm

weight lbs. kg

12˝ 18˝ 24˝ 30˝ 36˝

37 42 49 56 61

305 457 610 762 914

16.8 19.1 22.2 25.4 27.7

cubic feet model # list 7.7 RDBDR12-19 823 10.5 RDBDR18-19 902 13.4 RDBDR24-19 978 16.2 RDBDR30-19 1057 19.1 RDBDR36-19 1136

…designed to align with Spec-Bar® 24˝ (610mm) wide equipment with single speed rail.

29˝ width (737mm)

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

length in. mm

weight lbs. kg

12˝ 18˝ 24˝ 30˝ 36˝

37 42 49 56 61

305 457 610 762 914

16.8 19.1 22.2 25.4 27.7

cubic feet model # list 7.7 RDBSR12-24 823 10.5 RDBSR18-24 902 13.4 RDBSR24-24 978 16.2 RDBSR30-24 1057 19.1 RDBSR36-24 1136

275


UNDERBAR Catalog Section 40

Spec-Bar® Corner Workboards see spec sheet EG40.30 FEATURES:

• Removable stainless steel perforated insert and mounting clips. • Type 304 stainless steel construction. • 11⁄2˝ (38mm) I.P.S. threaded drain with nut and washer. Note:

inner corner workboard

Two leg channel and stainless steel crossbraced leg assemblies available to create freestanding unit. To order, add $386 and suffix -2LC. Example: ICWB-19/19-2LC.

outside corner workboard

description inside full corner to fit 19˝ (483mm) underbar equipment inside full corner to fit 19˝ (483mm) underbar equipment inside full corner to fit 19˝ (483mm) underbar equipment inside full corner to fit 19˝ (483mm) underbar equipment inside full corner to fit 19˝ (483mm) underbar equipment 90˚ outer corner to fit 19˝ (483mm) underbar equipment 90˚ inner corner to fit 19˝ (483mm) underbar equipment 45˚ outer corner to fit 19˝ (483mm) underbar equipment 45˚ inner corner to fit 19˝ (483mm) underbar equipment inside full corner to fit 24˝ (610mm) underbar equipment inside full corner to fit 24˝ (610mm) underbar equipment inside full corner to fit 24˝ (610mm) underbar equipment 90˚ outer corner to fit 24˝ (610mm) underbar equipment 90˚ inner corner to fit 24˝ (610mm) underbar equipment 45˚ outer corner to fit 24˝ (610mm) underbar equipment 45˚ inner corner to fit 24˝ (610mm) underbar equipment

weight cubic lbs. kg feet model # 35 15.9 7.7 ICWB-19/19 40 18.1 9.3 ICWB-19/24L 40 18.1 9.3 ICWB-19/24R 45 20.4 11.3 ICWB-19/30L 45 20.4 11.3 ICWB-19/30R 50 22.7 7.7 90OCWB-19 50 22.7 7.7 90ICWB-19 46 20.9 7.7 45OCWB-19 46 20.9 7.7 45ICWB-19 45 20.4 11.4 ICWB-24/24 50 22.7 13.4 ICWB-24/30L 50 22.7 13.4 ICWB-24/30R 55 24.9 11.4 90OCWB-24 55 24.9 11.4 90ICWB-24 48 21.8 11.4 45OCWB-24 48 21.8 11.4 45ICWB-24

Spec-Bar® Angle Workboards see spec sheet EG40.31

description 75˚ outer corner to fit 19˝ (483mm) underbar equipment 75˚ inner corner to fit 19˝ (483mm) underbar equipment 60˚ outer corner to fit 19˝ (483mm) underbar equipment 60˚ inner corner to fit 19˝ (483mm) underbar equipment 45˚ outer corner to fit 19˝ (483mm) underbar equipment 45˚ inner corner to fit 19˝ (483mm) underbar equipment 30˚ outer corner to fit 19˝ (483mm) underbar equipment 30˚ inner corner to fit 19˝ (483mm) underbar equipment 15˚ outer corner to fit 19˝ (483mm) underbar equipment 15˚ inner corner to fit 19˝ (483mm) underbar equipment 75˚ outer corner to fit 24˝ (610mm) underbar equipment 75˚ inner corner to fit 24˝ (610mm) underbar equipment 60˚ outer corner to fit 24˝ (610mm) underbar equipment 60˚ inner corner to fit 24˝ (610mm) underbar equipment 45˚ outer corner to fit 24˝ (610mm) underbar equipment 45˚ inner corner to fit 24˝ (610mm) underbar equipment 30˚ outer corner to fit 24˝ (610mm) underbar equipment 30˚ inner corner to fit 24˝ (610mm) underbar equipment 15˚ outer corner to fit 24˝ (610mm) underbar equipment 15˚ inner corner to fit 24˝ (610mm) underbar equipment

276

Leg channel and stainless steel crossbraced leg assembly available. To order, add $194 and suffix -LC. Example: ICWB-19/19-LC.

Freight class is 100.0. list 908 932 932 947 947 947 947 604 604 947 972 972 972 972 742 742

(•) MTS (made to stock) / ( ) MTO (made to order)

• Removable stainless steel perforated insert and mounting clips. • Inner and outer workboards available in angles of 30˚, 45˚, 60˚, and 90˚. • Type 304 stainless steel construction. FEATURES: • 11⁄2˝ (38mm) I.P.S. threaded drain with nut and washer.

weight cubic lbs. kg feet model # 42 19.1 7.7 WBOC75-19 42 19.1 7.7 WBIC75-19 36 16.3 7.7 WBOC60-19 36 16.3 7.7 WBIC60-19 30 13.6 7.7 WBOC45-19 30 13.6 7.7 WBIC45-19 24 10.9 7.7 WBOC30-19 24 10.9 7.7 WBIC30-19 20 9.1 7.7 WBOC15-19 20 9.1 7.7 WBIC15-19 44 20.0 11.3 WBOC75-24 44 20.0 11.3 WBIC75-24 38 17.2 11.3 WBOC60-24 38 17.2 11.3 WBIC60-24 33 15.0 11.3 WBOC45-24 33 15.0 11.3 WBIC45-24 27 12.2 11.3 WBOC30-24 27 12.2 11.3 WBIC30-24 23 10.4 11.3 WBOC15-24 23 10.4 11.3 WBIC15-24

Freight class is 100.0. list 558 558 447 447 447 447 447 447 447 447 683 683 556 556 556 556 556 556 556 556

(•) MTS (made to stock) / ( ) MTO (made to order)

inner angle workboard

outer angle workboard

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


UNDERBAR Catalog Section 40

Spec-Bar® Workboard Cabinets see spec sheet EG40.32

FEATURES:

• Type 304 stainless steel construction. • Removable perforated insert, adjustable shelf, and adjustable bullet feet—all stainless steel. • 11⁄2˝ (38mm) I.P.S. threaded drain with nut and washer. • 37˝ (940mm) overall height. Note:

These units cannot use speed rails.

Freight class is 100.0. (•) MTS (made to stock) / ( ) MTO (made to order)

…with Closed Base — Locks are standard. length in. mm 24˝ 19˝ 30˝ width 36˝ (483mm) 42˝ 48˝ 24˝ 24˝ 30˝ width 36˝ (610mm) 42˝ 48˝

610 762 914 1067 1219 610 762 914 1067 1219

weight lbs. kg 50 55 60 65 70 55 60 65 70 75

22.7 24.9 27.2 29.5 31.8 24.9 27.2 29.5 31.8 34.0

cubic feet model # 14.9 WBCB24-19 18.1 WBCB30-19 21.3 WBCB36-19 24.5 WBCB42-19 27.7 WBCB48-19 18.1 WBCB24-24 22.0 WBCB30-24 25.9 WBCB36-24 29.8 WBCB42-24 33.7 WBCB48-24

...with Open Base list 1407 1766 1948 2128 2306 1760 1956 2151 2346 2542

Spec-Bar® Filler Boards see spec sheet EG40.29 length in. mm 6˝ 12˝ 18˝ 19˝ 24˝ width 30˝ (483mm) 36˝ 42˝ 48˝ 60˝ 6˝ 12˝ 18˝ 24˝ 24˝ width 30˝ (610mm) 36˝ 42˝ 48˝ 60˝

152 305 457 610 762 914 1067 1219 1524 152 305 457 610 762 914 1067 1219 1524

weight lbs. kg 18 22 26 30 34 37 41 45 49 19 23 27 30 35 39 43 47 51

8.2 10.0 11.8 13.6 15.4 16.8 18.6 20.4 22.2 8.6 10.4 12.2 13.6 15.9 17.7 19.5 21.3 23.1

cubic feet model # 3.3 FB6-19 5.6 FB12-19 7.3 FB18-19 9.3 FB24-19 11.3 FB30-19 13.3 FB36-19 15.3 FB42-19 17.3 FB48-19 21.3 FB60-19 4.0 FB6-24 6.5 FB12-24 8.9 FB18-24 11.3 FB24-24 13.8 FB30-24 16.2 FB36-24 18.6 FB42-24 21.1 FB48-24 25.9 FB60-24

list 594 666 742 823 902 978 1064 1143 1221 673 742 823 902 978 1057 1143 1221 1301

length in. mm 24˝ 19˝ 30˝ width 36˝ (483mm) 42˝ 48˝ 24˝ 24˝ 30˝ width 36˝ (610mm) 42˝ 48˝

610 762 914 1067 1219 610 762 914 1067 1219

weight lbs. kg 45 50 55 60 65 50 55 60 65 70

20.4 22.7 24.9 27.2 29.5 22.7 24.9 27.2 29.5 31.8

cubic feet model # 14.9 WBOB24-19 18.1 WBOB30-19 21.3 WBOB36-19 24.5 WBOB42-19 27.7 WBOB48-19 18.1 WBOB24-24 22.0 WBOB30-24 25.9 WBOB36-24 29.8 WBOB42-24 22.7 WBOB48-24

list 1293 1438 1583 1737 1884 1457 1619 1785 1948 2113

• Work surface reinforced with heavy gauge support channels. • Type 304 stainless steel construction • Adjustable stainless steel bullet feet • Perforated stainless steel insert • 11⁄2˝ (38mm) I.P.S. threaded drain with nut and washer. FEATURES: • 37˝ (940mm) overall height.

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

Note:

These units cannot use speed rails.

Freight class is 100.0. (•) MTS (made to stock) / ( ) MTO (made to order)

277


UNDERBAR Catalog Section 40

Spec-Bar® Beer Drainers see spec sheet

EG40.33

FEATURES:

19˝ width (483mm)

24˝ width (610mm)

length in. mm

weight lbs. kg

18˝ 24˝ 30˝ 18˝ 24˝ 30˝

25 30 35 28 33 42

457 610 762 457 610 762

11.3 13.6 15.9 12.7 15.0 19.1

cubic feet model # 7.3 BD18-19 9.3 BD24-19 11.3 BD30-19 8.9 BD18-24 11.3 BD24-24 13.8 BD30-24

Note:

list 742 823 902 823 902 978

EG40.40

Ultrahigh efficiency wash pumps for superior cleaning.

Rotary Glasswashers by see spec sheet

(•) MTS (made to stock) / ( ) MTO (made to order)

• • • • • FEATURES: •

weight cubic description lbs. kg feet model # low-temp model, 115V, 12A, with sanitizer pump 178 80.2 20 MD240LT high-temp model, 208/240V, 32/26A, built-in booster heater 178 80.2 20 MD240HT

EG40.41

Ultrahigh efficiency wash pumps for superior cleaning.

FEATURES:

These units cannot use speed rails.

Freight class is 100.0.

• • • •

Automatic Glasswashers by see spec sheet

• Removable perforated stainless steel insert, adjustable bullet feet and tubing chase built into rear deck. • Type 304 stainless steel construction • 11⁄2˝ (38mm) I.P.S. threaded drain with nut and washer. • 37˝ (940mm) overall height.

11˝ (279mm) glass clearance. Counterbalanced door. Reduced water usage. Built-in detergent and rinse aid dispensing pumps. 24˝ (610mm) side-to-side. 26˝ (660mm) front-to-back. 38˝ (965mm) total height. Processes 30 racks per hour. 5 ⁄8˝ (16mm) drain connection. Two 20˝ (508mm) square racks included. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Price upon application.

• Upper and lower wash and rinse arms produce sparkling clean glasses every time. • Three-pump injection system allows the use of separate sanitizer and rinse aid. • 251⁄4˝ (641mm) side-to-side. • 251⁄8˝ (638mm) front-to-back. • 39˝ (991mm) total height. • Quiet operation. • Splash protection. • Stores three 1-gal. containers. Freight class is 70.0.

description one door on front, clockwise conveyor

278

weight cubic lbs. kg feet model # 156 71 25 DF

(•) MTS (made to stock) / ( ) MTO (made to order)

Price upon application.

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


UNDERBAR Catalog Section 40

Spec-Bar® Blender Stations with T&S Faucet see spec sheet EG40.24

Designed to align with single speed rails on adjoining equipment. length* in. mm

weight lbs. kg

FEATURES:

• Sink bowl with T&S gooseneck faucet and liftout perforated sink strainer. • Constructed of type 304 stainless steel with sink, workboard, and wet waste configurations for the perfect mixing component. • 8˝ (203mm) high backsplash. • Blender shelf with rear cord access hole. • Stainless steel adjustable feet. Note:

These units cannot use speed rails.

Freight class is 100.0.

cubic feet model # 7.3 BS14-19 8.9 BS18-19 8.6 BS14-24 10.5 BS18-24

list 1438 1525 1596 1674

(•) MTS (made to stock) / ( ) MTO (made to order) 14˝ 356 42 19.1 (483mm) 18˝ 457 55 24.9 24˝ width 14˝ 356 47 21.3 (610mm) 18˝ 457 65 29.5 * Dimensions do not include 5˝ (127mm) additional width to align with equipment with single speed rail.

19˝ width

Spec-Bar® Wet Waste Blender Stations see spec sheet EG40.25

Designed to align with single speed rails on adjoining equipment.

FEATURES:

• 6˝ (152) diameter wet waste sink with T&S glass filler. • Constructed of type 304 stainless steel with sink, workboard, and wet waste configurations for the perfect mixing component. • 8˝ (203mm) high backsplash. • Blender shelf with rear cord access hole. • Lift-out stainless steel perforated sink strainer. • Stainless steel adjustable feet. Note:

length* in. mm

weight lbs. kg

19˝ width

cubic feet model # 6.5 BWBS12-19 8.9 BWBS14-19 7.6 BWBS12-24 8.6 BWBS14-24

These units cannot use speed rails.

Freight class is 100.0.

list 1293 1346 1438 1502

12˝ 305 40 18.1 (•) MTS (made to stock) / ( ) MTO (made to order) 14˝ 356 42 19.1 24˝ width 12˝ 305 45 20.4 (610mm) 14˝ 356 47 21.3 * Dimensions do not include 5˝ (127mm) additional width to align with equipment with single speed rail. (483mm)

Spec-Bar® Drainboard Blender Stations see spec sheet EG40.26

Designed to align with single speed rails on adjoining equipment. length* in. mm

weight lbs. kg

FEATURES:

cubic feet model # 6.5 BDBS12-19 8.9 BDBS18-19 7.6 BDBS12-24 8.6 BDBS18-24

• Drain also included. • Constructed of type 304 stainless steel with sink, workboard, and wet waste configurations for the perfect mixing component. • 8˝ (203mm) high backsplash. • Blender shelf with rear cord access hole. • Lift-out stainless steel perforated sink strainer. • Stainless steel adjustable feet. Note:

list

These units cannot use speed rails.

Freight class is 100.0.

12˝ 305 40 18.1 784 (•) MTS (made to stock) / ( ) MTO (made to order) (483mm) 18˝ 457 42 19.1 924 24˝ width 12˝ 305 45 20.4 831 (610mm) 18˝ 457 47 21.3 972 * Dimensions do not include 5˝ (127mm) additional width to align with equipment with single speed rail.

19˝ width

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

279


UNDERBAR Catalog Section 40

Spec-Bar® Cocktail Stations see spec sheet

EG40.43

Flexibility of freestanding equipment in one easy unit.

description ice bin is on left, sinks are on right ice bin is on right, sinks are on left

FEATURES:

weight cubic lbs. kg feet model # 345 156.5 37.0 CS42-32L 345 156.5 37.0 CS42-32R

list 8232 8232

Freight class is 110.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Spec-Bar® Combination Cocktail Stations see spec sheet

• T&S quality faucets. • Stone gray color, unless specified. Other colors available. • 32˝ (813mm) overall width. • 42˝ (1067mm) length. • Blender shelf. • Two 6˝ (152mm) deep sinks. • Overshelf with removable perforated inserts, ice bin, tubing chase, work surface, and double speed rail. • 8-circuit post-mix cold plate. • Front and end panels are stone gray plastic laminate over wood core.

EG40.44

FEATURES:

• • • • • • • • • •

T&S quality faucets. Stone gray color, unless specified. Recessed workboard and/or liquor display area. Blender station. 12˝ (305mm) long wet waste sink area. Double speed rail. Dry waste chute. Combination ice bin. Condiment dispenser. Tubing access holes. Freight class is 110.0. (•) MTS (made to stock) / ( ) MTO (made to order)

29˝ width (737mm)

overall length in. mm

weight lbs. kg

60˝ 60˝ 66˝ 66˝ 66˝ 66˝ 72˝ 72˝ 72˝

191 191 211 221 211 211 223 221 231

1524 1524 1676 1676 1676 1676 1829 1829 1829

86.6 86.6 95.7 100.2 95.7 95.7 101.2 95.7 104.8

cu ft 38.0 38.0 42.0 42.0 42.0 42.0 44.0 44.0 44.0

recessed combination liquor display wkbd. length ice bin length length in. mm in. mm in. mm model # n/a n/a 36˝ 914 12˝ 305 CCS-60-1 12˝ 305 36˝ 914 n/a n/a CCS-60-2 n/a n/a 42˝ 1067 12˝ 305 CCS-66-1 12˝ 305 42˝ 1067 n/a n/a CCS-66-2 18˝ 457 36˝ 914 n/a n/a CCS-66-3 n/a n/a 36˝ 914 18˝ 457 CCS-66-4 12˝ 305 36˝ 914 12˝ 305 CCS-72 n/a n/a 42˝ 1067 18˝ 457 CCS-72-1 18˝ 457 42˝ 1067 n/a n/a CCS-72-2

Spec-Bar® Beverage Dispensers see spec sheet

description stainless steel, 4 faucets brass, 4 faucets stainless steel, 5 faucets brass, 5 faucets

280

EG40.46

list 5679 5311 5894 5526 5389 5881 6498 6096 5604

Note: 8-circuit post-mix cold plates available. To order, add $1830 to list price and add suffix “-8” to model number. Example: CCS-60-1-8. Note: To order NEW 10-circuit post-mix cold plate, add $1830 to list price and add suffix “-10” to model number. Example: CCS-60-1-10.

• 16˝ (406mm) working height. • Drain pan with lift-out perforated insert for cleaning ease. FEATURES: • Available with four or five faucet configurations.

weight cubic lbs. kg feet model # 23 10.4 3.8 BT4S-DT 23 10.4 3.8 BT4B-DT 25 11.3 3.8 BT5S-DT 25 11.3 3.8 BT5B-DT

list 908 1502 1009 1538

Freight class is 110.0. (•) MTS (made to stock) / ( ) MTO (made to order)

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


UNDERBAR Catalog Section 40 • Step-and-rail open design. • 24˝ (610mm) wide models feature four levels of storage. 29˝ (770mm) wide models have five. • Each level has a retaining front rail. FEATURES: • 37˝ (940mm) overall height.

Spec-Bar® Liquor Displays see spec sheet

EG40.47

cutout aligns with speed rail of other equipment

Freight class is 110.0.

Designed to align with speed rails installed on adjoining equipment.

…designed to align with single speed rail adjoined to Spec-Bar® 19˝ (483mm) wide equipment.

24˝ width (610mm)

length in. mm

weight lbs. kg

12˝ 18˝ 24˝ 30˝ 36˝

20 25 30 35 40

305 457 610 762 914

9.1 11.3 13.6 15.9 18.1

cubic feet model # 6.5 LDSR12-19 8.9 LDSR18-19 11.3 LDSR24-19 13.7 LDSR30-19 16.2 LDSR36-19

list 1032 1214 1394 1572 1754

…designed to align with Spec-Bar® 24˝ (610mm) wide equipment with no speed rail.

24˝ width (610mm)

length in. mm

weight lbs. kg

12˝ 18˝ 24˝ 30˝ 36˝

20 25 30 35 45

305 457 610 762 914

9.1 11.3 13.6 15.9 20.4

cubic feet model # 6.5 LD12-24 8.9 LD18-24 11.3 LD24-24 13.7 LD30-24 16.2 LD36-24

list 1032 1214 1394 1572 1754

(•) MTS (made to stock) / ( ) MTO (made to order)

…designed to align with double speed rail adjoined to Spec-Bar® 19˝ (483mm) wide equipment.

29˝ width (737mm)

length in. mm

weight lbs. kg

12˝ 18˝ 24˝ 30˝ 36˝

22 30 35 45 55

10.0 13.6 15.9 20.4 24.9

list 1188 1394 1596 1800 2001

…designed to align with single speed rail adjoined to Spec-Bar® 24˝ (610mm) wide equipment.

29˝ width (737mm)

length in. mm

weight lbs. kg

12˝ 18˝ 24˝ 30˝ 36˝

20 25 30 35 40

305 457 610 762 914

9.1 11.3 13.6 15.9 20.4

cubic feet model # 7.6 LDSR12-24 10.5 LDSR18-24 13.4 LDSR24-24 16.2 LDSR30-24 19.1 LDSR36-24

list 1188 1394 1596 1800 2001

• Fits between 19˝ or 24˝ (457 or 610mm) wide Spec-Bar® equipment. • Mounting clips provided. • Dry waste units feature front hinged access door and 6˝ (153mm) round opening.

Spec-Bar® Dry Waste & Tubing Chases see spec sheet

305 457 610 762 914

cubic feet model # 7.6 LDDR12-19 10.5 LDDR18-19 13.4 LDDR24-19 16.2 LDDR30-19 19.1 LDDR36-19

EG40.52 FEATURES:

Freight class is 100.0. (•) MTS (made to stock) / ( ) MTO (made to order)

description dry waste unit dry waste unit dry waste unit tubing chase tubing chase

width x length in. mm 12˝ x 24˝ 18˝ x 19˝ 18˝ x 24˝ 6˝ x 19˝ 6˝ x 24˝

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

305 x 610 457 x 483 457 x 610 152 x 583 152 x 610

weight lbs. kg 25 25 28 15 17

11.3 11.3 12.7 6.8 7.7

cubic feet model # 6.5 DW12-24 7.3 DW18-19 8.9 DW18-24 3.3 TC6-19 4.1 TC6-24

list 657 657 761 433 493

281


UNDERBAR Catalog Section 40

Spec-Bar® Permanent Speed Rails and Locking Covers see spec sheet

EG40.50

FEATURES:

• Single speed rails are 5˝ (127mm) wide. • Double speed rails are 10˝ (254mm) wide. • Locking covers include storage hangers when ordered with original single speed rails. Note:

When ordering, specify desired speed rail length by indicating in model number suffix. Example: SSR-12 indicates a 12˝ (305mm)-long single speed rail.

Freight class is 70.0. Spec-Bar® permanent speed rail

(•) MTS (made to stock) / ( ) MTO (made to order)

Spec-Bar® permanent double speed rail

length description

single speed rails

locking cover for single speed rails

double speed rails

locking cover for double speed rails

282

in.

mm

12˝ to 17˝ 18˝ to 23˝ 24˝ to 29˝ 30˝ to 35˝ 36˝ to 41˝ 42˝ to 47˝ 48˝ to 53˝ 54˝ to 59˝ 60˝ to 65˝ 66˝ to 71˝ 72˝ to 77˝ 78˝ to 83˝ 84˝ 12˝ to 17˝ 18˝ to 23˝ 24˝ to 29˝ 30˝ to 35˝ 36˝ to 41˝ 42˝ 12˝ to 17˝ 18˝ to 23˝ 24˝ to 29˝ 30˝ to 35˝ 36˝ to 41˝ 42˝ to 47˝ 48˝ to 53˝ 54˝ to 59˝ 60˝ to 65˝ 66˝ to 71˝ 72˝ to 77˝ 78˝ to 83˝ 84˝ 12˝ to 17˝ 18˝ to 23˝ 24˝ to 29˝ 30˝ to 35˝ 36˝ to 41˝ 42˝

305 to 432 457 to 584 610 to 737 762 to 889 914 to 1041 1067 to 1194 1219 to 1346 1372 to 1499 1524 to 1651 1676 to 1803 1829 to 1956 1981 to 2108 2134 305 to 432 457 to 584 610 to 737 762 to 889 914 to 1041 1067 305 to 432 457 to 584 610 to 737 762 to 889 914 to 1041 1067 to 1194 1219 to 1346 1372 to 1499 1524 to 1651 1676 to 1803 1829 to 1956 1981 to 2108 2134 305 to 432 457 to 584 610 to 737 762 to 889 914 to 1041 1067

weight cubic lbs. kg feet model # 4 1.8 0.4 SSR-12 to 17 6 2.7 0.5 SSR-18 to 23 7 3.2 0.6 SSR-24 to 29 10 4.5 0.7 SSR-30 to 35 12 5.4 0.9 SSR-36 to 41 18 8.2 1.0 SSR-42 to 47 22 10.0 1.1 SSR-48 to 53 25 11.3 1.2 SSR-54 to 59 28 12.7 1.4 SSR-60 to 65 32 14.5 1.5 SSR-66 to 71 35 15.9 1.6 SSR-72 to 77 38 17.2 1.7 SSR-78 to 83 42 19.1 1.9 SSR-84 15 6.8 0.4 SSRLC-12 to 17 22 10.0 0.5 SSRLC-18 to 23 28 12.7 0.6 SSRLC-24 to 29 30 13.6 0.7 SSRLC-30 to 35 32 14.5 0.8 SSRLC-36 to 41 35 15.9 1.0 SSRLC-42 8 3.6 1.4 DSR-12 to 17 12 5.4 1.9 DSR-18 to 23 14 6.4 2.4 DSR-24 to 29 20 9.1 2.9 DSR-30 to 35 24 10.9 3.4 DSR-36 to 41 36 16.3 3.9 DSR-42 to 47 44 20.0 4.4 DSR-48 to 53 50 22.7 4.9 DSR-54 to 59 56 25.4 5.4 DSR-60 to 65 64 29.0 5.9 DSR-66 to 71 70 31.8 6.4 DSR-72 to 77 76 34.5 6.9 DSR-78 to 83 84 38.1 7.5 DSR-84 30 13.6 1.4 DSRLC-12 to 17 44 20.0 1.9 DSRLC-18 to 23 56 25.4 2.4 DSRLC-24 to 29 60 27.2 2.9 DSRLC-30 to 35 64 29.0 3.4 DSRLC-36 to 41 70 31.8 3.9 DSRLC-42

list 151 176 196 225 255 285 315 345 374 404 434 462 492 160 187 241 287 337 386 272 329 391 449 508 568 626 687 740 805 865 924 984 289 374 484 571 672 772

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


UNDERBAR Catalog Section 40 • Keyhole models are removable and are for existing equipment. • Hanging models clip onto existing single FEATURES: speed rails.

Spec-Bar® Removable Single Speed Rails see spec sheet

EG40.51

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Spec-Bar® keyhole speed rail

length in. mm

5˝ width (127mm)

Spec-Bar hanging speed rail ®

12˝ 18˝ 24˝ 30˝ 36˝

305 457 610 762 914

weight cubic KEYHOLE SPEED RAILS lbs. kg feet model # list 4 1.8 0.4 KSR-12 277 6 2.7 0.5 KSR-18 280 7 3.2 0.6 KSR-24 298 10 4.5 0.7 KSR-30 305 12 5.4 0.9 KSR-36 319

Spec-Bar® Mini Bottle Racks FEATURES:

see spec sheet EG40.48

HANGING SPEED RAILS model # list HSR-12 194 HSR-18 200 HSR-24 232 HSR-30 262 HSR-36 291

• Type 304 stainless steel construction. • Countertop and underbar models available. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

width x length in. mm

description countertop model, holds 252 bottles underbar model, holds 510 bottles

12˝ x 24˝ 24˝ x 24˝

305 x 610 610 x 610

weight cubic lbs. kg feet model # list 35 15.9 6.5 BRM-24CT 792 95 43.1 11.3 BRM-24 1940

Optional Locking Covers description

model # BRM-CTLC-24 BRM-LC-24

fits bottle rack #BRM-24CT fits bottle rack #BRM-24

Spec-Bar® Glass Rack Storage Units see spec sheet

EG40.49

FEATURES:

list 408 565

• GR series provide storage for three glass racks. • WBGR series include a stainless steel workboard top surface with lift-out perforated inset and accommodates two glass racks. • Removable clips and pilasters included on all units. Freight class is 110.0. (•) MTS (made to stock) / ( ) MTO (made to order)

19˝ width (483mm)

24˝ width (610mm)

length in. mm

weight lbs. kg

18˝ 24˝ 18˝ 24˝ 18˝ 24˝

40 45 40 50 47 55

457 610 457 610 457 610

18.1 20.4 18.1 22.7 21.3 24.9

cubic feet model # 11.7 GR18-19 14.9 GR24-19 14.3 GR18-24 18.1 GR24-24 14.3 WBGR18-24 18.1 WBGR24-24

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

list 972 1128 1128 1293 1293 1457

283


UNDERBAR Catalog Section 40

Standard Portable Bar see spec sheet

EG40.53

Offers both functionability and durability at an economical price. FEATURES:

Note:

COMES WITH A TOWEL RING!

For 7-circuit post-mix sealed-in cold plate, add suffix “-7” to model number and add $1640 to list price. Example: PB-5-7.

Freight class is 100.0.

weight cubic lbs. kg feet model # 292 132.5 55.9 PB-5

list 2946

(•) MTS (made to stock) / ( ) MTO (made to order)

• • • •

Deluxe Portable Bars see spec sheet

5´(1524mm). Black vinyl exterior. Black formica top. Stainless steel interior working surface. 153⁄8˝ x 193⁄4˝ x 8˝ (391 x 502 x 203mm) ice bin with 11⁄2˝ (38mm) drain. • 4˝ (102mm) plate casters (two with brake). • Two speed rails and bumper guards. ALL PORTABLE BARS ARE SHIPPED ASSEMBLED. • • • • •

EG40.53

• • • • • FEATURES:

Black vinyl exterior. Black formica top. Stainless steel interior working surface. 153⁄8˝ x 193⁄4˝ x 8˝ (391 x 502 x 203mm) ice bin with 11⁄2˝ (38mm) drain. Double tier stainless steel speed rail. Adjustable stainless steel glides for storage racks. Center locking storage cabinet. Two soda gun openings and bumper guards. Working height accommodates all soda system tanks.

Note:

For 7-circuit post-mix sealed-in cold plate, add suffix “-7” to model number and add $1640 to list price. Example: DPB-5-7.

Freight class is 100.0. (•) MTS (made to stock) / ( ) MTO (made to order)

weight cubic lbs. kg feet model # 225 102.1 77.9 DPB-5

list 3700

• Standard features listed above, plus left or right locking cabinet and stainless steel speed rail. weight cubic lbs. kg feet model # 240 108.9 80.1 DPB-5R DPB-5L

PLACE

HERE!

(custom laser-cut for Rehoboth Beach Country Club, Rehoboth Beach, DE)

284

list 3909 3909

• Standard features listed above, plus two locking cabinets and two stainless steel speed rails. weight cubic lbs. kg feet model # 250 113.4 80.1 DPB-5LR

list 4053

CUSTOM COSMETICS AVAILABLE!! Laser-Cutting and Custom Decal Services for Portable Bars! Laser-Cutting Service… • Offers a “high-tech” look. • Creates smooth curves along text and/or artwork. • Materials includes various plastics, woods, and designer aluminum.

Decal Service… • Factory-applied decals are industrial-strength, yet more economical. • Image(s) printed on vinyl material with adhesive backing.

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


Dishtables Accessories/Options Anti-Siphon Breaker ........................296 Bullet Feet ......................................296 Condensate Vents and Hoods ........293 Control Panel Bracket......................296 Custom Modifications ....................294 Disposal Provision Packages ..........297 Drain Trough ..................................296 Gussets ..........................................296 Legs / Crossbrace Assemblies ........297 Lever Drains....................................296 Polymer Undershelves ....................297 Prerinse Basket with Slide Bar ........296 Prerinse Units ................................296

PVC Rollers ....................................297 Rack Shelves ..................................295 Rack Slide ......................................296 Scrap Basket ..................................296 Sink Covers ....................................297 Soiled Dishtable Kit..................288-292 Stainless Steel Legs, Gussets, Feet ......................286-292 Undershelves ..................................296

Clean Dishtables

Soiled Dishtables Corner Design ................................289 Island Design ..................................290 Straight Design ..............................288 with 3-Compartment Pot Sink ........292 with Landing Shelf ..........................291

More Dishtables Dishtable Package Special ..............287 Mobile Soak Sinks ..........................293 Undercounter Dishtables ................292

Corner Design ................................286 Island Design ..................................287 Straight Design ..............................286

General specifications: Dishtables available are corner, straight, and island design; clean, soiled, and undercounter; left- and right-handed models. Tops: 14 gauge type 304 stainless steel, 16/304 or 16/430 stainless steel with all seams welded, grounded smooth and polished. Where indicated, front and ends have a 3˝ (76mm) high turn-up and be finished with a 11⁄2˝ (38mm) diameter sanitary rolled edge. 8˝ (203mm) high backsplash is 5˝ (127mm) high with a 2˝ (51mm) 45˚ return to wall, plus a 1˝ (25mm) upturn and tile edge for easy installation and feathering to wall/splash surface. All vertical and horizontal bends are coved to a 3⁄8˝ (10mm) radius. Table is constructed in full compliance with NSF requirements. Underbracing: “U”-type channel constructed of 14 gauge 304-18-8 stainless steel, welded to underside of table. Whenever necessary, there are full enclosed plated or stainless steel gussets welded to channel to accept legs. Legs: 15⁄8˝ (41mm) outside dimension, seamlessly welded galvanized or stainless steel tubing. Connecting legs front-to-back are 1˝ (25mm) diameter galvanized or stainless steel tubing fully welded to same. Leg assembly complete with corrosion-resistant fully adjustable bullet feet. Prerinse Sink: Soiled table equipped with an integrally welded recessed sink 20˝ x 20˝ x 5˝ (508 x 508 x 127mm), complete with a 31⁄2˝ (89mm) diameter hole to accommodate a 11⁄2˝ (38mm) basket drain furnished by EAGLE GROUP. Scrap Block: Soiled table furnished with a 53⁄4˝ (146mm) diameter die-stamped hole with a 1⁄2˝ (13mm) high raised edge to prevent spillage. Fitted within is a removable gray neoprene scrap block.

285


DISHTABLES Catalog Section 50

Clean Dishtables see spec sheets

EG50.00

EG50.01

SPEC-MASTER® FEATURES:

• 14/304 dishtables. • Stainless steel crossbraced legs. • Stainless steel gussets and stainless steel feet. • • • • • • • •

60˝ m) 24m 5 (1

FEATURES:

clean dishtable straight design — right-hand model with optional undershelf

30˝ (762mm) width. Polished stainless steel work surface. 201⁄2˝ (521mm) opening to accept dishwasher. Crossbraced legs. Rolled edges. 8˝ (203mm) backsplash, Left or right operation. L or R in model numbers indicate left- or righthand models.

Note:

Freight class is 70.0. clean dishtable corner design — left-hand model

(•) MTS (made to stock) / ( ) MTO (made to order)

Stainless Steel Options

Straight Design EG50.00 length weight cu in. mm lb. kg ft 24˝ 24˝ 30˝ 30˝ 36˝ 36˝ 48˝ 48˝ 60˝ 60˝ 72˝ 72˝ 84˝ 84˝ 96˝ 96˝ 120˝ 120˝

610 610 762 762 914 914 1219 1219 1524 1524 1829 1829 2134 2134 2438 2438 3048 3048

36 36 42 42 49 49 63 63 77 77 91 91 105 105 119 119 147 147

16.3 16.3 19.1 19.1 22.2 22.2 28.6 28.6 34.9 34.9 41.3 41.3 47.6 47.6 54.0 54.0 66.7 66.7

Corner Design

8.3 8.3 10.1 10.1 12.4 12.4 15.3 15.3 18.9 18.9 22.4 22.4 25.9 25.9 29.4 29.4 33.2 33.2

48˝ 48˝ 60˝ 60˝ 72˝ 72˝ 84˝ 84˝ 96˝ 96˝ 120˝ 120˝

286

1219 1219 1524 1524 1829 1829 2134 2134 2438 2438 3048 3048

120 120 130 130 140 140 150 150 160 160 180 180

54.4 54.4 59.0 59.0 63.5 63.5 68.0 68.0 72.6 72.6 81.6 81.6

16 gauge type 430 model # list CDTL-24-16/4 • 1088 CDTR-24-16/4 • 1088 CDTL-30-16/4 1173 CDTR-30-16/4 1173 CDTL-36-16/4 • 1263 CDTR-36-16/4 • 1263 CDTL-48-16/4 • 1387 CDTR-48-16/4 • 1387 CDTL-60-16/4 • 1474 CDTR-60-16/4 • 1474 CDTL-72-16/4 1551 CDTR-72-16/4 1551 CDTL-84-16/4 1689 CDTR-84-16/4 1689 CDTL-96-16/4 1732 CDTR-96-16/4 1732 CDTL-120-16/4 2276 CDTR-120-16/4 2276

16 gauge type 304 model # list CDTL-24-16/3 • 1181 CDTR-24-16/3 • 1181 CDTL-30-16/3 • 1259 CDTR-30-16/3 • 1259 CDTL-36-16/3 • 1354 CDTR-36-16/3 • 1354 CDTL-48-16/3 • 1476 CDTR-48-16/3 • 1476 CDTL-60-16/3 • 1563 CDTR-60-16/3 • 1563 CDTL-72-16/3 • 1639 CDTR-72-16/3 • 1639 CDTL-84-16/3 1820 CDTR-84-16/3 1820 CDTL-96-16/3 1974 CDTR-96-16/3 1974 CDTL-120-16/3 2399 CDTR-120-16/3 2399

14 gauge type 304 model # list CDTL-24-14/3 1386 CDTR-24-14/3 1386 CDTL-30-14/3 1501 CDTR-30-14/3 • 1501 CDTL-36-14/3 1683 CDTR-36-14/3 1683 CDTL-48-14/3 1761 CDTR-48-14/3 • 1761 CDTL-60-14/3 1877 CDTR-60-14/3 1877 CDTL-72-14/3 1982 CDTR-72-14/3 1982 CDTL-84-14/3 2166 CDTR-84-14/3 2166 CDTL-96-14/3 2213 CDTR-96-14/3 2213 CDTL-120-14/3 2907 CDTR-120-14/3 2907

29.8 29.8 36.8 36.8 43.8 43.8 50.8 50.8 57.8 57.8 73.8 73.8

16 gauge type 430 model # list CDTCL-48-16/4 2949 CDTCR-48-16/4 2949 CDTCL-60-16/4 3028 CDTCR-60-16/4 3028 CDTCL-72-16/4 3161 CDTCR-72-16/4 3161 CDTCL-84-16/4 3298 CDTCR-84-16/4 3298 CDTCL-96-16/4 3342 CDTCR-96-16/4 3342 CDTCL-120-16/4 4406 CDTCR-120-16/4 4406

description Stainless Steel Legs for lengths up to 72˝ for lengths 84˝ and longer Stainless Steel Legs and Gussets for lengths up to 72˝ for lengths 84˝ and longer Stainless Steel Legs, Gussets, and Feet for lengths up to 72˝ for lengths 84˝ and longer

add* suffix #

add to list price

-SL -SL

174 348

-SLG -SLG

226 453

-SLGF -SLGF

260 520

add* suffix #

add to list price

-SL -SL

343 481

-SLG -SLG

496 664

-SLGF -SLGF

580 782

* Example: CDTL-24-16/3-SL

Stainless Steel Options

EG50.01

length weight cu in. mm lb. kg ft

For accessories, see pages 296-297.

16 gauge type 304 model # list CDTCL-48-16/3 3216 CDTCR-48-16/3 3216 CDTCL-60-16/3 3293 CDTCR-60-16/3 3293 CDTCL-72-16/3 3426 CDTCR-72-16/3 3426 CDTCL-84-16/3 3560 CDTCR-84-16/3 3560 CDTCL-96-16/3 3604 CDTCR-96-16/3 3604 CDTCL-120-16/3 4657 CDTCR-120-16/3 4657

14 gauge type 304 model # list CDTCL-48-14/3 3715 CDTCR-48-14/3 3715 CDTCL-60-14/3 3821 CDTCR-60-14/3 3821 CDTCL-72-14/3 3986 CDTCR-72-14/3 3986 CDTCL-84-14/3 4172 CDTCR-84-14/3 4172 CDTCL-96-14/3 4218 CDTCR-96-14/3 4218 CDTCL-120-14/3 5477 CDTCR-120-14/3 5477

description Stainless Steel Legs for lengths up to 96˝ for lengths 96˝ and longer Stainless Steel Legs and Gussets for lengths up to 96˝ for lengths 96˝ and longer Stainless Steel Legs, Gussets, and Feet for lengths up to 96˝ for lengths 96˝ and longer * Example: CDTCL-48-16/4-SL

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


DISHTABLES Catalog Section 50

Clean Dishtables - Island Design see spec sheet

EG50.08

SPEC-MASTER® FEATURES:

6 (152 0˝ 4mm )

• 14/304 dishtables. • Stainless steel crossbraced legs. • Stainless steel gussets and stainless steel feet. • • • • • • • •

FEATURES:

30˝ (762mm) width. Polished stainless steel work surface. 201⁄2˝ (521mm) opening to accept dishwasher. Crossbraced legs. Rolled edges. 8˝ (203mm) backsplash, Left or right operation. L or R in model numbers indicate left- or right-hand models.

Note:

Freight class is 70.0.

clean dishtable island design — right-hand model

length in. mm

weight lb. kg

48˝ 48˝ 60˝ 60˝ 72˝ 72˝ 96˝ 96˝ 120˝ 120˝

118 118 128 128 138 138 157 157 172 172

1219 1219 1524 1524 1829 1829 2438 2438 3048 3048

cu ft

53.5 53.5 58.1 58.1 62.6 62.6 71.2 71.2 78.0 78.0

29.8 29.8 36.8 36.8 43.0 43.0 57.0 57.0 71.0 71.0

16 gauge type 430 model # list CDTCIL-48-16/4 2852 CDTCIR-48-16/4 2852 CDTCIL-60-16/4 2932 CDTCIR-60-16/4 2932 CDTCIL-72-16/4 3064 CDTCIR-72-16/4 3064 CDTCIL-96-16/4 3242 CDTCIR-96-16/4 3242 CDTCIL-120-16/4 4213 CDTCIR-120-16/4 4213

For accessories, see pages 296-297.

(•) MTS (made to stock) / ( ) MTO (made to order)

16 gauge type 304 model # list CDTCIL-48-16/3 3119 CDTCIR-48-16/3 3119 CDTCIL-60-16/3 3199 CDTCIR-60-16/3 3199 CDTCIL-72-16/3 3329 CDTCIR-72-16/3 3329 CDTCIL-96-16/3 3505 CDTCIR-96-16/3 3505 CDTCIL-120-16/3 4465 CDTCIR-120-16/3 4465

14 gauge type 304 model # list CDTCIL-48-14/3 3608 CDTCIR-48-14/3 3608 CDTCIL-60-14/3 3716 CDTCIR-60-14/3 3716 CDTCIL-72-14/3 3880 CDTCIR-72-14/3 3880 CDTCIL-96-14/3 4108 CDTCIR-96-14/3 4108 CDTCIL-120-14/3 5265 CDTCIR-120-14/3 5265

Stainless Steel Options for 16 Gauge Clean Dishtables add* add to description suffix # list price Stainless Steel Legs for lengths up to 96˝ -SL 343 for lengths 96˝ and longer -SL 481 Stainless Steel Legs and Gussets for lengths up to 96˝ -SLG 496 for lengths 96˝ and longer -SLG 664 Stainless Steel Legs, Gussets, and Feet for lengths up to 96˝ -SLGF 580 for lengths 96˝ and longer -SLGF 782 * Example: CDTCIL-48-16/4-SL

Dishtable Package Special see spec sheet

EG50.13

Clean dishtable and soiled dishtable, both 48˝ (1219mm) 16 gauge 304 stainless steel. Rubber scrap block; prerinse faucet #300718; prerinse basket & slide bar; and 42˝ (1067mm) KD tubular rack shelf. (Dishwasher not included.) Freight class is 70.0. model # DTC-48LR-16/3 DTC-48RL-16/3

list 6219 6219

Note: DTC-48RL-16/3 does not come with scrap block.

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

#DTC-48LR-16/3 left-to-right operation shown

287


DISHTABLES Catalog Section 50

Soiled Dishtables - Straight Design see spec sheet

EG50.02

• • • •

14/304 dishtables. Stainless steel crossbraced legs. Stainless steel gussets and stainless steel feet. Scrap block hole and rubber scrap block are included on all models except 30˝, 36˝ L and R, and 48˝ R*.

• • • • • • • •

30˝ (762mm) width. Polished stainless steel work surface. 201⁄2˝ (521mm) opening to accept dishwasher. Crossbraced legs. Rolled edges. 8˝ (203mm) backsplash. Prerinse sink, and left or right operation. L or R in model numbers indicate left- or righthand models.

SPEC-MASTER® FEATURES:

FEATURES:

Note:

Freight class is 70.0.

soiled dishtable straight design — left-hand model with optional accessories

length in. mm 30˝ 30˝ 36˝ 36˝ 48˝ 48˝ 60˝ 60˝ 72˝ 72˝ 84˝ 84˝ 96˝ 96˝ 120˝ 120˝

762 762 914 914 1219 1219 1524 1524 1829 1829 2134 2134 2438 2438 3048 3048

weight lb. kg 42 42 49 49 63 63 77 77 91 91 105 105 119 119 147 147

19.1 19.1 22.2 22.2 28.6 28.6 34.9 34.9 41.3 41.3 47.6 47.6 54.0 54.0 66.7 66.7

cu ft 10.1 10.1 12.4 12.4 15.3 15.3 18.9 18.9 22.4 22.4 25.9 25.9 29.6 29.6 33.6 33.6

16 gauge type 430 model # list SDTL-30-16/4 1855 SDTR-30-16/4 1855 SDTL-36-16/4 • 2139 SDTR-36-16/4 • 2139 SDTL-48-16/4* • 2214 SDTR-48-16/4 • 2214 SDTL-60-16/4* • 2291 SDTR-60-16/4* • 2291 SDTL-72-16/4* 2409 SDTR-72-16/4* 2409 SDTL-84-16/4* 2552 SDTR-84-16/4* 2552 SDTL-96-16/4* 2593 SDTR-96-16/4 * 2593 SDTL-120-16/4 * 3242 SDTR-120-16/4* 3242

For accessories, see pages 296-297.

(•) MTS (made to stock) / ( ) MTO (made to order)

16 gauge type 304 model # list SDTL-30-16/3 1986 SDTR-30-16/3 1986 SDTL-36-16/3 • 2219 SDTR-36-16/3 2219 SDTL-48-16/3 * • 2293 SDTR-48-16/3 • 2293 SDTL-60-16/3 * • 2369 SDTR-60-16/3* • 2369 SDTL-72-16/3 * • 2492 SDTR-72-16/3* • 2492 SDTL-84-16/3 * 2672 SDTR-84-16/3* 2672 SDTL-96-16/3 * 2913 SDTR-96-16/3 * 2913 SDTL-120-16/3 * 3356 SDTR-120-16/3 * 3356

14 gauge type 304 model # list SDTL-30-14/3 2357 SDTR-30-14/3 2357 SDTL-36-14/3 3233 SDTR-36-14/3 3233 SDTL-48-14/3* 3343 SDTR-48-14/3 3343 SDTL-60-14/3* 3451 SDTR-60-14/3* 3451 SDTL-72-14/3* 3613 SDTR-72-14/3* 3613 SDTL-84-14/3* 3807 SDTR-84-14/3* 3807 SDTL-96-14/3* 3857 SDTR-96-14/3 * 3857 SDTL-120-14/3 * 4675 SDTR-120-14/3* 4675

* Scrap block provided with these models. To order without scrap block, deduct $50 off list price and add suffix “-NSB” to model number. Example: SDTL-48-16/3-NSB

Stainless Steel Options for 16 Gauge Solid Dishtables add* add to description suffix # list price Stainless Steel Legs for lengths up to 72˝ -SL 174 for lengths 84˝ and longer -SL 348 Stainless Steel Legs and Gussets for lengths up to 72˝ -SLG 226 for lengths 84˝ and longer -SLG 453 Stainless Steel Legs, Gussets, and Feet for lengths up to 72˝ -SLGF 260 for lengths 84˝ and longer -SLGF 520

Soiled Dishtable Kit see spec sheet

For all soiled dishtables listed above. • Scrap basket. • Rack slide. • T&S prerinse faucet (313295). Add suffix “-SRP” to model # and add $1951. Example: SDTL-30-16/4-SRP

* Example: SDTL-30-16/4-SL

288

EG50.07

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


DISHTABLES Catalog Section 50

Soiled Dishtables - Corner Design see spec sheet

EG50.03

• • • •

14/304 dishtables. Stainless steel crossbraced legs. Stainless steel gussets and stainless steel feet. Scrap block hole and rubber scrap block are included on all models except 30˝, 36˝ L and R, and 48˝ R*.

• • • • • • • •

30˝ (762mm) width. Polished stainless steel work surface. 201⁄2˝ (521mm) opening to accept dishwasher. Crossbraced legs. Rolled edges. 8˝ (203mm) backsplash. Prerinse sink, and left or right operation. L or R in model numbers indicate left- or right-hand models.

SPEC-MASTER® FEATURES: 60˝ (1524 mm)

FEATURES:

Note:

For accessories, see pages 296-297.

Freight class is 70.0. soiled dishtable corner design — right-hand model with optional accessories

length in. mm

weight lb. kg

60˝ 60˝ 72˝ 72˝ 84˝ 84˝ 96˝ 96˝ 120˝ 120˝

170 170 180 180 190 190 200 200 215 215

1524 1524 1829 1829 2134 2134 2438 2438 3048 3048

77.1 77.1 81.6 81.6 86.2 86.2 90.7 90.7 97.5 97.5

cu ft 36.8 36.8 43.8 43.8 50.8 50.8 57.8 57.8 65.2 65.2

(•) MTS (made to stock) / ( ) MTO (made to order)

16 gauge type 430 model # list SDTCL-60-16/4 4201 SDTCR-60-16/4 4201 SDTCL-72-16/4 4321 SDTCR-72-16/4 4321 SDTCL-84-16/4 4458 SDTCR-84-16/4 4458 SDTCL-96-16/4 4501 SDTCR-96-16/4 4501 SDTCL-120-16/4 5419 SDTCR-120-16/4 5419

16 gauge type 304 model # list SDTCL-60-16/3 4604 SDTCR-60-16/3 4604 SDTCL-72-16/3 4723 SDTCR-72-16/3 4723 SDTCL-84-16/3 4855 SDTCR-84-16/3 4855 SDTCL-96-16/3 4899 SDTCR-96-16/3 4899 SDTCL-120-16/3 5808 SDTCR-120-16/3 5808

Stainless Steel Options for 16 Gauge Solid Dishtables

Soiled Dishtable Kit see spec sheet

add* add to suffix # list price

description Stainless Steel Legs for lengths up to 96˝ -SL for lengths 96˝ and longer -SL Stainless Steel Legs and Gussets for lengths up to 96˝ -SLG for lengths 96˝ and longer -SLG Stainless Steel Legs, Gussets, and Feet for lengths up to 96˝ -SLGF for lengths 96˝ and longer -SLGF

343 481 496 664

14 gauge type 304 model # list SDTCL-60-14/3 5412 SDTCR-60-14/3 5412 SDTCL-72-14/3 5574 SDTCR-72-14/3 5574 SDTCL-84-14/3 5764 SDTCR-84-14/3 5764 SDTCL-96-14/3 5812 SDTCR-96-14/3 5812 SDTCL-120-14/3 6738 SDTCR-120-14/3 6738

EG50.07

For all soiled dishtables listed above. • Scrap basket. • Rack slide. • T&S prerinse faucet (313295). Add suffix “-SRP” to model # and add $1951. Example: SDTCL-60-16/4-SRP

580 782

* Example: SDTCL-60-16/4-SL

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

289


DISHTABLES Catalog Section 50

Soiled Dishtables - Island Design see spec sheet

EG50.09

• • • •

14/304 dishtables. Stainless steel crossbraced legs. Stainless steel gussets and stainless steel feet. Scrap block hole and rubber scrap block are included on all models except 30˝, 36˝ L and R, and 48˝ R*.

• • • • • • • •

30˝ (762mm) width. Polished stainless steel work surface. 201⁄2˝ (521mm) opening to accept dishwasher. Crossbraced legs. Rolled edges. 8˝ (203mm) backsplash. Prerinse sink, and left or right operation. L or R in model numbers indicate left- or righthand models.

SPEC-MASTER® FEATURES:

6 (152 0˝ 4mm )

FEATURES: soiled dishtable island design —right-hand model shown

Note:

For accessories, see pages 296-297.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

length in. mm

weight lb. kg

60˝ 60˝ 72˝ 72˝ 84˝ 84˝ 96˝ 96˝ 108˝ 108˝ 120˝ 120˝

168 168 178 178 188 188 198 198 208 208 218 218

1524 1524 1829 1829 2134 2134 2438 2438 2743 2743 3048 3048

76.2 76.2 80.7 80.7 85.3 85.3 89.9 89.9 94.3 94.3 98.9 98.9

cu ft 36.6 36.6 43.6 43.6 50.8 50.8 57.6 57.6 64.6 64.6 71.6 71.6

16 gauge type 430 model # list SDTCIL-60-16/4 4103 SDTCIR-60-16/4 4103 SDTCIL-72-16/4 4225 SDTCIR-72-16/4 4225 SDTCIL-84-16/4 4361 SDTCIR-84-16/4 4361 SDTCIL-96-16/4 4403 SDTCIR-96-16/4 4403 SDTCIL-108-16/4 4880 SDTCIR-108-16/4 4880 SDTCIL-120-16/4 5272 SDTCIR-120-16/4 5272

16 gauge type 304 model # list SDTCIL-60-16/3 4507 SDTCIR-60-16/3 4507 SDTCIL-72-16/3 4628 SDTCIR-72-16/3 4628 SDTCIL-84-16/3 4762 SDTCIR-84-16/3 4762 SDTCIL-96-16/3 4803 SDTCIR-96-16/3 4803 SDTCIL-108-16/3 5254 SDTCIR-108-16/3 5254 SDTCIL-120-16/3 5661 SDTCIR-120-16/3 5661

Stainless Steel Options for 16 Gauge Solid Dishtables add* add to suffix # list price

description Stainless Steel Legs for lengths up to 96˝ -SL for lengths 96˝ and longer -SL Stainless Steel Legs and Gussets for lengths up to 96˝ -SLG for lengths 96˝ and longer -SLG Stainless Steel Legs, Gussets, and Feet for lengths up to 96˝ -SLGF for lengths 96˝ and longer -SLGF

343 481 496 664

14 gauge type 304 model # list SDTCIL-60-14/3 5306 SDTCIR-60-14/3 5306 SDTCIL-72-14/3 5464 SDTCIR-72-14/3 5464 SDTCIL-84-14/3 5659 SDTCIR-84-14/3 5659 SDTCIL-96-14/3 5705 SDTCIR-96-14/3 5705 SDTCIL-108-14/3 6263 SDTCIR-108-14/3 6263 SDTCIL-120-14/3 6635 SDTCIR-120-14/3 6635

Soiled Dishtable Kit see spec sheet

For all soiled dishtables listed above. • Scrap basket. • Rack slide. • T&S prerinse faucet (313295). Add suffix “-SRP” to model # and add $1951. Example: SDTCIL-60-16/4-SRP

580 782

* Example: SDTCIL-60-16/4-SL

290

EG50.07

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


DISHTABLES Catalog Section 50

Soiled Dishtables with Landing Shelf see spec sheet

EG50.10

®

SPEC-MASTER FEATURES:

FEATURES:

• 14/304 dishtables. • Stainless steel crossbraced legs. • Stainless steel gussets and stainless steel feet. • 201⁄2˝ (521mm) opening to accept dishwasher. • 12˝ (305mm) wide landing shelf on a 401⁄2˝ (1029mm) landing area. • L or R in model numbers indicate left- or right-hand models. Note: For accessories, see pages 296-297. Predrilled double rack shelf or double-sided sorting rack now available. To order double rack shelf, add suffix “-DRS” to model number and $2303 to list price. To order double-sided sorting rack, add suffix “-DSS” to model number and $2108 to list price. Example: SDTLR-72-16/4-DSS

Freight class is 70.0. soiled dishtable with landing shelf — left-hand model with optional accessories shown

length in. mm

weight lb. kg

cu ft

66˝ 66˝ 72˝ 72˝ 78˝ 78˝ 84˝ 84˝ 96˝ 96˝ 108˝ 108˝ 120˝ 120˝

165 74.8 165 74.8 175 79.4 175 79.4 185 83.9 185 83.9 195 88.5 195 88.5 210 95.3 210 95.3 220 99.8 220 99.8 230 107.3 230 107.3

40.2 40.2 43.8 43.8 48.8 48.8 50.8 50.8 57.8 57.8 61.8 61.8 65.2 65.2

1676 1676 1829 1829 1981 1981 2134 2134 2438 2438 2743 2743 3048 3048

(•) MTS (made to stock) / ( ) MTO (made to order)

16 gauge type 430 model # list SDTLL-66-16/4 3739 SDTLR-66-16/4 3739 SDTLL-72-16/4 4995 SDTLR-72-16/4 4995 SDTLL-78-16/4 5212 SDTLR-78-16/4 5212 SDTLL-84-16/4 5129 SDTLR-84-16/4 5129 SDTLL-96-16/4 5171 SDTLR-96-16/4 5171 SDTLL-108-16/4 5431 SDTLR-108-16/4 5431 SDTLL-120-16/4 6704 SDTLR-120-16/4 6704

16 gauge type 304 model # list SDTLL-66-16/3 4238 SDTLR-66-16/3 4238 SDTLL-72-16/3 5389 SDTLR-72-16/3 5389 SDTLL-78-16/3 5544 SDTLR-78-16/3 5544 SDTLL-84-16/3 5521 SDTLR-84-16/3 5521 SDTLL-96-16/3 5562 SDTLR-96-16/3 5562 SDTLL-108-16/3 5997 SDTLR-108-16/3 5997 SDTLL-120-16/3 7079 SDTLR-120-16/3 7079

Stainless Steel Options for 16 Gauge Solid Dishtables

Soiled Dishtable Kit see spec sheet

add* add to suffix # list price

description Stainless Steel Legs for lengths up to 96˝ -SL for lengths 96˝ and longer -SL Stainless Steel Legs and Gussets for lengths up to 96˝ -SLG for lengths 96˝ and longer -SLG Stainless Steel Legs, Gussets, and Feet for lengths up to 96˝ -SLGF for lengths 96˝ and longer -SLGF

343 481 496 664

14 gauge type 304 model # list SDTLL-66-14/3 5029 SDTLR-66-14/3 5029 SDTLL-72-14/3 6311 SDTLR-72-14/3 6311 SDTLL-78-14/3 6455 SDTLR-78-14/3 6455 SDTLL-84-14/3 6502 SDTLR-84-14/3 6502 SDTLL-96-14/3 6548 SDTLR-96-14/3 6548 SDTLL-108-14/3 6865 SDTLR-108-14/3 6865 SDTLL-120-14/3 8235 SDTLR-120-14/3 8235

EG50.07

For all soiled dishtables listed above. • Scrap basket. • Rack slide. • T&S prerinse faucet (313295). Add suffix “-SRP” to model # and add $1951. Example: SDTLL-66-16/4-SRP

580 782

* Example: SDTLL-66-16/4-SL

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

291


DISHTABLES Catalog Section 50

Soiled Dishtables with 3-Compartment Pot Sink see spec sheet

EG50.11

SPEC-MASTER® FEATURES:

FEATURES:

• 14/304 dishtables. • Stainless steel crossbraced legs. • Stainless steel gussets and stainless steel feet. • 201⁄2˝ (521mm) opening to accept dishwasher. • L or R in model numbers indicate left- or righthand models. Note:

For accessories, see pages 296-297.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

soiled dishtable with 3-compartment pot sink—right-hand model

length in. mm

weight lb. kg

124˝ 124˝

190 190

3150 3150

cu ft

86.2 86.2

60.4 60.4

16 gauge type 430 16 gauge type 304 model # list model # list SDTPL-124-16/4 6108 SDTPL-124-16/3 7118 SDTPR-124-16/4 6108 SDTPR-124-16/3 7118

Stainless Steel Options for 16 Gauge Solid Dishtables

14 gauge type 304 model # list SDTPL-124-14/3 8626 SDTPR-124-14/3 8626

Soiled Dishtable Kit

add* add to suffix # list price

description Stainless Steel Legs for lengths up to 72˝ -SL for lengths 84˝ and longer -SL Stainless Steel Legs and Gussets for lengths up to 72˝ -SLG for lengths 84˝ and longer -SLG Stainless Steel Legs, Gussets, and Feet for lengths up to 72˝ -SLGF for lengths 84˝ and longer -SLGF

see spec sheet

EG50.07

For all soiled dishtables listed above. • Scrap basket. • Rack slide. • T&S prerinse faucet (313295). Add suffix “-SRP” to model # and add $1951. Example: SDTPL-124-16/4-SRP

174 348 226 453 260 520

* Example: SDTPL-124-16/4-SL

Undercounter Dishtables see spec sheet

EG50.05 FEATURES:

• Sized to accept all 24˝ (620mm) wide undercounter dishwashers. • L or R in model numbers indicate left or right placement of dishwasher. Note:

To order stainless steel crossbrace legs order part #316660 (see page 297).

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

undercounter dishtable with optional accessories shown —right-hand model

length in. mm

weight lb. kg

48˝ 48˝ 60˝ 60˝

95 95 105 105

292

1219 1219 1524 1524

43.1 43.1 47.6 47.6

cu ft 15.3 15.3 18.9 18.9

16 gauge type 430 model # list UDT-4L-16/4 • 1733 UDT-4R-16/4 • 1733 UDT-5L-16/4 1855 UDT-5R-16/4 1855

16 gauge type 304 model # list UDT-4L-16/3 • 1983 UDT-4R-16/3 • 1983 UDT-5L-16/3 2148 UDT-5R-16/3 2148

14 gauge type 304 model # list UDT-4L-14/3 2207 UDT-4R-14/3 2207 UDT-5L-14/3 2439 UDT-5R-14/3 2439

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


DISHTABLES Catalog Section 50

Mobile Soak Sinks see spec sheet

EG50.04

FEATURES:

• • • • • • • •

8˝ (203mm) deep sink. 14 gauge. Lever drain. 5˝ (127mm) casters (two with brake). Rolled edge. Stainless steel legs. Stainless steel gussets. Stainless steel crossbraces. Freight class is 85.0. (•) MTS (made to stock) / ( ) MTO (made to order)

mobile soak sink…

…with silver chute and silverware basket

overall width x length in. mm 23˝ x 23˝ 27˝ x 27˝

33˝ (838mm) HEIGHT cu weight ft lb. kg model # list 14 80 36.3 MSS2020 2793 15 90 40.8 MSS2424 • 2845

584 x 584 686 x 686

20˝ (508mm) HEIGHT WITH SILVER CHUTE AND SILVERWARE BASKET weight lb. kg model # list 75 34.0 MSS2020SC • 3065 85 38.6 MSS2424SC 3129

Dishwasher Condensate Vents, DVS Series see spec sheets EG50.07B

FEATURES:

EG55.03

• Mounts to dishwasher end vents. • Seams are continuously liquid-tight. • 18 gauge type 304 stainless steel. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

outer width x length x height* in. mm 4˝ x 16˝ x 48˝ 4˝ x 16˝ x 60˝ 4˝ x 16˝ x 72˝

102 x 406 x 1219 102 x 406 x 1524 102 x 406 x 1829

weight lbs. kg 60 75 90

27.2 34.0 40.8

model # DVS-48 DVS-60 DVS-72

list price each 1241 1359 1463

* If you have other size requirements, please call the factory. Outer width and length dimensions exclude flange.

Dishwasher Condensate and Type II NFPA-96 for TYPE II Hoods, HDC Series see spec sheets EG50.07B

EG55.03 FEATURES:

• 12˝ x 12˝ (305 x 305mm) collar opening for exhaust connection. • 20˝ (508mm) height. • Type 304 stainless steel construction. • Full perimeter gutter and drain tube located on the left. Note: For Type II applications, optional baffles are required. To order, add suffix “S” to model number (example: HDC3636S) and 30% to list price.

overall width x length* in. mm 36˝ x 36˝ 36˝ x 42˝ 36˝ x 48˝ 42˝ x 42˝ 48˝ x 48˝

914 x 914 914 x 1067 914 x 1219 1067 x 1067 1219 x 1219

weight cubic lbs. kg feet model # 105 47.6 41.7 HDC3636 115 52.2 43.5 HDC3642 125 56.7 52.5 HDC3648 135 61.2 53.5 HDC4242 150 68.0 66.2 HDC4848

Freight class is 70.0. list 2418 2713 2863 3076 3562

(•) MTS (made to stock) / ( ) MTO (made to order)

* If you have other size requirements, please call the factory. 100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

293


DISHTABLES Catalog Section 50

Dishtable Custom Modifications see spec sheet EG50.07A Custom dishtables built to fit your needs. Please allow six to eight weeks shipping cycle for custom fabrication after receipt of approved drawings.

See pages 295-297 for more dishtable accessories and options. For SpecFAB® Custom Fabrications, see pages 341-348.

See pages 337-340 for more custom options and accesories.

model #

description

unit

list model #

OVERSHELF MODIFICATIONS AND OPTIONS: E38-6 ** Cantilever mount up to 6´, add to wall shelf price E38-12 ** Cantilever mount up to 12´, add to wall shelf price

EA EA

DISHTABLE SCRAPPING MODIFICATIONS AND OPTIONS (continued): Mitered angle in scrapping trough EA 364 E115B Rubber Scrap Block installed EA 544 E116 300691 Replacement rubber scrap block EA

DISHTABLE RACK SHELF MODIFICATIONS AND OPTIONS: E103 Rack shelf, back splash mounted E104 Drain, bleeder type

FT EA

DISHTABLE BACKSPLASH MODIFICATIONS AND OPTIONS: E101 Splash 10˝ per linear ft. E101A Turn down back splash (with z-clips) E30 End splash - per end, all heights E39 Enclosed backsplash

LIN. FT TABLE EA LIN. FT

DISHTABLE TOP MODIFICATIONS AND OPTIONS: E100 Additional length NSF Construction E102 Pass-thru shelf max. 12˝ up to 3 lin. ft. E102A additional over 36˝ for pass-thru shelf E106 Rack guide curved 2˝ x 1/4˝ s/s flat bar (requires E112) E107 Corner turn 90 degrees E108A Field joint, ready for bolting together by others E108B Field joint, prepared for field welding by others E109 Cutout for pipes, columns E112 Mitered Corner E119 Landing shelf 12˝W integral with top E120 Limit switch DISHTABLE SCRAPPING MODIFICATIONS AND OPTIONS: E115 Scrapping Trough 6˝x4˝ deep—up to 60˝ E115A additional over 60˝ ** - applicable to wall mount shelves and pot racks

294

LIN. FT LIN. FT LIN. FT EA EA EA EA EA EA LIN. FT EA

LIN. FT LIN. FT

description

463 DISHTABLE SINK WELDMENT MODIFICATIONS AND OPTIONS: Prerinse sink 20˝ x 20˝ x 5˝ 115 E105 E105A for each additional 2˝ in depth E110 Sink 24˝ x 26 1/2˝ x 14˝ Soak sink 16˝ x 20˝ x 13 1/2˝ 53 E117 Faucet Holes 223 E122 287 78 FAUCETS: 300490 Faucet - 4˝ centers, 12˝ spout, deck mount 325 1869 622 327 1256 275 275 614 627 221 163

unit

list 661 331 94

EA EA EA EA EA

953 115 1725 1234 154

EA

160

DISPOSAL PROVISION PACKAGES (For more information, see page 297): E41 Disposal provision package, collar EA E41A Disposal provision package, cone (top must be 14/304 s/s) EA E41B Provision for scrap collector and troughveyor EA

668 1256

CONTROL PANEL BRACKETS (For more information, see page 296): E96 Control Panel Bracket - 6˝ x 9˝ EA E96A Control Panel Bracket - 9˝ x 12˝ EA

220 331

DISHTABLE BASE MODIFICATIONS AND OPTIONS: E111 Undershelving stainless steel, per linear foot E113 Brackets for booster heater, installation only, brackets by others 1525 Crossbracing left-to-right, stainless steel 261 E118

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

668

LIN. FT

256

EA LIN. FT

143 83


DISHTABLES Catalog Section 50

Dishtable Rack Shelves

Freight class is 70.0.

see spec sheet

EG50.06

(•) MTS (made to stock) / ( ) MTO (made to order)

An efficient operation setup, these shelves provide extra rack storage. slanted rack shelf with drip tube on left

Slanted Rack Shelves

Double Rack Shelf

• Stainless steel (16 gauge) construction. • Wall mounting brackets. • Drip tube on left or right side. shipping TUBE ON LEFT weight lbs. kg model # list 533 x 533 20 9.0 605380 • 1015 533 x 1067 30 13.6 605381 • 1081 533 x 1600 40 18.1 605382 • 1181 533 x 2134 50 22.7 606294 1249

width x length in. mm 21˝ x 21˝ 21˝ x 42˝ 21˝ x 63˝ 21˝ x 84˝

TUBE ON RIGHT model # 606641 • 606642 • 606643 606644

list 1015 1081 1181 1249

• 60˝ (1524mm) long. • For soiled dishtables with island design (page 290) and soiled dishtables with landing shelf (page 291). • Drip tubes on wall mounted end. Please note: One end is wall-mounted.

shipping wt. lbs. kg model # 61 27.7 605383 •

list 2229

Tubular Design Rack Shelves • Wall mounted, all-welded construction.

Double Sided Sorting Shelf • 60˝ (1524mm) long. • For soiled dishtables with island design (page 290) and soiled dishtables with landing shelf (page 291). Please note: One end is wall-mounted.

shipping wt. lbs. kg model # 75 34.0 606295

list 2108

length shipping wt. in. mm lbs. kg model # 21˝ 533 16 7.3 606300 42˝ 1067 25 11.3 606301 63˝ 1600 34 15.4 606302 84˝ 2134 43 19.5 606303

KD Tubular Design Rack Shelves • Wall mounted. Knock-down construction. length shipping wt. in. mm lbs. kg model # 21˝ 533 17 7.7 606296 • 42˝ 1067 26 11.8 606297 • 63˝ 1600 35 15.9 606298 • 84˝ 2134 44 20.0 606299

list 804 899 971 1026

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

list 885 989 1067 1128

GET FREE DOWNLOADS • Spec Sheet • Product Instructions • Special Flyers • Brochures •

www.eaglegrp.com

295


DISHTABLES Catalog Section 50

Dishtable Accessories and Options

Can be shipped UPS.

see spec sheet EG50.07B

Scrap Basket

Prerinse Units…

• This model features all-16 gauge stainless steel construction. • Tabs provide proper height and basket drainage. shipping wt. lbs. kg model # 15 6.8 301630

• Temperature adjustment for hot water with preset cold water adjustment for anti-scald protection.

Improves prerinse efficiency. …Standard Prerinse Components

list 418

description

• 16 gauge construction. list 260

A must for any prerinse operation.

shipping wt. lbs. kg model # 13 5.8 SCRAP TROUGH

list 819

scrap trough

Control Panel Bracket description

model # E96 E96A

6˝ x 9˝ (152 x 229mm) 9˝ x 12˝ (229 x 305mm)

shipping wt. lbs. kg model # 3 1.4 606434 •

445 x 493 x 51

list 515

Dishtable Undershelves • 241⁄8˝ (612mm) wide. NOTE: Order one size smaller than dishtable.

• Optional only for 16 gauge tables. • Standard on SPEC-MASTER® tables. model # 316743

list 32

With a full 1˝ (25mm) adjustment. model # 300692 301036 300293

gusset

Provides extra space for rack storage and operation equipment. length in. mm 24˝ 610 36˝ 914 48˝ 1219

Bullet Feet

stainless steel white metal plastic feet

list 1273 337

• An all-in-one combination. • Type 304 construction throughout.

171⁄2˝ x 191⁄2˝ x 2˝

list 220 331

Stainless Steel Gussets

description

model # 313295 313297

Prerinse Basket with Slide Bar

width x length x depth in. mm

• Please specify location.

stainless steel gussets

• Top-of-the-line. deck mounted spray unit with wall bracket faucet add-on with 12˝ (305mm) spout

• 5˝ (127mm) wide and 2˝ (51mm) deep with a 11⁄2˝ (38mm) center drain opening. • Removable basket with handles. • All stainless steel construction.

list 1033 1029 274 69

…T&S Extra Heavy Duty Prerinse Components description

Drain Trough

description

model # 300719 300718 301189 301190

splash mounted spray unit deck mounted spray unit faucet add-on with 12˝ (305mm) spout wall bracket

Rack Slide shipping wt. lbs. kg model # 4 1.8 301124

(•) MTS (made to stock) / ( ) MTO (made to order)

weight galvanized lbs. kg model # list 10 4.5 605371 501 15 6.8 605372 609 20 9.0 605373 756

400 series model # list 605374 643 605375 717 605376 886

300 series model # list 606479 793 606480 884 606481 1022

list 17 9 2

Lever Drains Anti-Siphon Breaker model # 313832

296

description list 162

1.5˝ or 2˝ (38 or 51mm) NPS connection 2˝ (51mm) NPS connection

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

model # 300720 300721

list 213 213


DISHTABLES Catalog Section 50

Dishtable Accessories and Options

Can be shipped UPS.

see spec sheet EG50.07B

(•) MTS (made to stock) / ( ) MTO (made to order)

Legs and Crossbrace Assemblies

PVC Rollers

• Stainless steel welded construction.

• • • •

Note:

Standard only on SPEC-MASTER® series dishtables.

When durability and appearance are important. description crossbrace assembly crossbrace assembly for undercounter dishtables single leg for undershelf

model # 311772 316660 300765

list 171 163 69

2˝ (51mm) diameter. Free-wheel. For 14/304 dishtables only. For ease of sliding dish racks. • For stainless steel rollers, contact factory. • Three rollers required for every 12˝ (305mm). Example: For a 6´(1829mm) table, at the required three per foot: 6´table x 3 per foot = 18 rollers needed.

Sink Covers • 18 gauge stainless steel with holes provided for handling. width x length in. mm 20˝ x 20˝ 16˝ x 20˝

shipping weight lbs. kg model # 508 x 508 11 5.0 305428 406 x 508 10 4.5 351585

list price 185 174

length in. mm

shipping weight lbs. kg

24˝

3

610

1.4

table setup charge 469

corner dishtable with optional PVC rollers

model # DTRA-24

list each 196

vacuum breaker holes

LIFESTOR® Undershelf for Dishtables see spec sheets EG50.12 • Available for straight clean or soiled dishtables. • Louvered polymer shelf sections feature MICROGARD® antimicrobial protection. • Four-sided adjustable galvanized bracing ensures strength. NOTE: Must be ordered at same time as dishtable—cannot be field installed. To order, add suffix “-LL1” (example: CDTR-24-16/3-LL1). See chart below for pricing.

The only machine-washable undershelf in the market today! LIFESTOR® undershelf with tray drying racks

dishtable LIFESTOR® undershelf* length length in. mm in. mm list 24˝ 610 83⁄4˝ 222 201 30˝ 762 171⁄2˝ 445 209 36˝ 914 171⁄2˝ 445 225 48˝ 1219 261⁄4˝ 667 251 60˝ 1524 35˝ 889 279

dishtable length in. mm 72˝ 1829 84˝ 2134 96˝ 2438 120˝ 3048

LIFESTOR® undershelf* length in. mm list 433⁄4˝ 1111 312 521⁄2˝ 1334 336 70˝ 1778 471 871⁄2˝ 2223 534

Optional Tray Drying Racks for LIFESTOR® Undershelves 6 gauge wire with green epoxy coating. Fits 48˝ (1219mm) long shelves or longer. spacing in. mm 11⁄2˝ 38 3˝ 76

bracket

bracket disposal collar

disposal cone

Disposal Provision Package • Disposal collar adapters can be installed on any prerinse sink. • Both collar and cone are to be supplied by the customer. description

model #

list

disposal collar weldment, bracket for disposal switch, and vacuum breaker holes disposal cone* weldment, bracket for disposal switch, and vacuum breaker holes

E41

668

E41A

668

* If cone is welded to dishtable top, the top must be 14 gauge type 304 stainless steel.

Provision for Scrap Collector or Troughveyor • Cutout in top for collector mounting. • Does not include welding of unit to dishwasher. • All welding is by others. description Flange in opening or trough to accept collector or troughveyor when required

model # E41B

list 1256

number 18˝ RACKS 23˝ RACKS of slots model # list model # list 28 TR18481-VG 121 TR23481-VG 121 14 TR18483-VG 115 TR23483-VG 115 100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

297


NOTES ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________

298

____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


SPEC AIR® Ventilation Hoods Accessories

Ventilation Hoods

Air Space................................................................................303 Bullet Lights ..........................................................................303 Collars....................................................................................303 Enclosure Panels....................................................................303 Filter Frames ..........................................................................302 Furring Channels....................................................................303 Grease Cups ..........................................................................302 Grease Filters ........................................................................302 Insulated Back........................................................................303 Insulated Make-Up Air Plenum ..............................................303 Light Switch ..........................................................................303 Mounting Channel..................................................................303 Supply Fire Damper ..............................................................303 Trim Strips ............................................................................302

Dishwasher Condensate and Type II Hoods, HDC Series ............................................................302 Dishwasher Condensate Vents DVS Series ........................................................................301 Exhaust-Only Hoods HES, & HEB Series ............................................................300 Front Discharge Make-Up Air Exhaust Hoods, HEF & HESFA Series ............................................300 Internal Discharge Make-Up Air Hoods HEIA Series........................................................................301

Standard Features Include:

For use in commercial cooking including restaurant, kitchen, fast food, and deli.

NFPA-96

• Hood surfaces are constructed of 18 gauge type 430 stainless steel. Seams of the canopy are continuously welded liquid-tight. • U.L. Listed vapor-proof incandescent light fixtures are mounted and provided with a junction box mounted on top of the hood. • U.L. Classified filters are aluminum, non-clogging, baffle-type, and easily removable for cleaning. • Full-length stainless steel grease trough is pitched to drain grease from filters and exhaust plenum. • Grease drains from trough into a removable grease container for disposal. • 3˝ (76mm) air space at rear of exhaust hood. • Exhaust collar(s). • Supply collars included with make-up air exhaust hoods. • Supply collar(s) with fire damper(s) on internal make-up air models. • Front and rear mounting brackets. SPEC AIR® hoods come standard with accessories that most other manufacturers offer as options, with extra charge. However, should you require additional accessories, please select from our list. Include quantity and model number with your order. If you require an accessory not listed, please contact the factory for assistance.

299


SPEC AIR® VENTILATION HOODS Catalog Section 55

Exhaust-Only Hoods, HES & HEB Series see spec sheet

EG55.00

NFPA-96

• 51˝ (1295mm) deep and 24˝ (610mm) height. • Designed for use where make-up air is supplied by other vent systems.

FEATURES: Note: Prices do not include the following: Installation supplies and materials, hanging of ventilator, exhaust and supply fans, curbs, ductwork, transitions, penetrating and sealing of roof or ceiling, trim, flashing, permits, fire protection system or tests, air balancing, electrical of any nature or any special requirements from local authorities.

exhaust-only hood... …with short front fascia

Regular length in. mm

weight lbs. kg

48˝ 54˝ 60˝ 66˝ 72˝ 78˝ 84˝ 90˝ 96˝ 102˝ 108˝ 114˝ 120˝ 126˝ 132˝ 138˝ 144˝

275 309 344 378 412 481 550 567 584 601 618 653 687 721 756 790 825

1219 1372 1524 1676 1829 1981 2134 2286 2438 2591 2743 2896 3048 3200 3353 3505 3658

124.7 140.2 156.0 171.5 186.9 218.2 249.5 257.2 264.9 272.6 280.3 296.2 311.6 327.0 342.9 358.3 374.2

cubic feet model # 69.5 HEB96-48 76.9 HEB96-54 84.0 HEB96-60 91.5 HEB96-66 98.5 HEB96-72 112.9 HEB96-78 127.5 HEB96-84 131.0 HEB96-90 134.5 HEB96-96 138.1 HEB96-102 141.7 HEB96-108 148.9 HEB96-114 156.0 HEB96-120 163.5 HEB96-126 170.5 HEB96-132 177.7 HEB96-138 184.9 HEB96-144

list 5183 5776 6354 6928 7572 8146 8792 9366 10009 10585 11161 11804 12381 13024 13600 14243 14819

Short Front model # HES96-48 HES96-54 HES96-60 HES96-66 HES96-72 HES96-78 HES96-84 HES96-90 HES96-96 HES96-102 HES96-108 HES96-114 HES96-120 HES96-126 HES96-132 HES96-138 HES96-144

Front Discharge Make-Up Air Exhaust Hoods, HEF & HESFA Series NFPA-96 see spec sheet

front discharge make-up air exhaust hood…

weight lbs. kg

48˝ 54˝ 60˝ 66˝ 72˝ 78˝ 84˝ 90˝ 96˝ 102˝ 108˝ 114˝ 120˝ 126˝ 132˝ 138˝ 144˝

302 339 378 415 453 491 529 567 605 642 679 718 755 793 831 869 907

300

1219 1372 1524 1676 1829 1981 2134 2286 2438 2591 2743 2896 3048 3200 3353 3505 3658

137.0 153.8 171.5 188.2 205.5 222.7 240.0 257.2 274.4 291.2 308.0 325.7 342.5 359.7 376.9 394.2 411.4

cubic feet model # 69.5 HEF96-48 76.9 HEF96-54 84.0 HEF96-60 91.5 HEF96-66 98.5 HEF96-72 112.9 HEF96-78 127.5 HEF96-84 131.0 HEF96-90 134.5 HEF96-96 138.1 HEF96-102 141.7 HEF96-108 148.9 HEF96-114 156.0 HEF96-120 163.5 HEF96-126 170.5 HEF96-132 177.7 HEF96-138 184.9 HEF96-144

(•) MTS (made to stock) / ( ) MTO (made to order)

Regular and short front models (for low ceilings) available.

• 51˝ (1295mm) deep and 24˝ (610mm) height. • Supplies make-up air through the hood, independent of other ventilation systems, at FEATURES: ceiling level.

…with short front fascia

Regular length in. mm

EG55.01

list 4580 5161 5726 6822 6875 7438 8020 8584 9164 9738 10295 10877 11443 11996 12588 13133 13706

Freight class is 70.0.

Short Front

Note: Prices do not include the following: Installation supplies and materials, hanging of ventilator, exhaust and supply fans, curbs, ductwork, transitions, penetrating and sealing of roof or ceiling, trim, flashing, permits, fire protection system or tests, air balancing, electrical of any nature or any special requirements from local authorities.

Freight class is 70.0. list 7492 7515 11053 11060 12847 12855 14264 14395 14529 16189 16372 16477 18251 18273 20300 20637 21841

model # HESFA96-48 HESFA96-54 HESFA96-60 HESFA96-66 HESFA96-72 HESFA96-78 HESFA96-84 HESFA96-90 HESFA96-96 HESFA96-102 HESFA96-108 HESFA96-114 HESFA96-120 HESFA96-126 HESFA96-132 HESFA96-138 HESFA96-144

list 7177 7200 8894 8903 10612 10618 12329 12336 13902 14054 15747 15771 17465 17487 19181 19205 20900

(•) MTS (made to stock) / ( ) MTO (made to order)

Regular and short front models (for low ceilings) available.

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


SPEC AIR® VENTILATION HOODS Catalog Section 55

Internal Discharge Make-Up Air Hoods, HEIA Series NFPA-96 see spec sheet

EG55.02

FEATURES:

• 51˝ (1295mm) deep and 24˝ (610mm) height. • Designed to save energy by keeping outside air inside the hood. Outside air is mixed and exhausted with the grease-laden air. Note: Prices do not include the following: Installation supplies and materials, hanging of ventilator, exhaust and supply fans, curbs, ductwork, transitions, penetrating and sealing of roof or ceiling, trim, flashing, permits, fire protection system or tests, air balancing, electrical of any nature or any special requirements from local authorities.

Positive air flow design!

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

length in. mm

weight cubic lbs. kg feet

48˝ 54˝ 60˝ 66˝ 72˝ 78˝ 84˝ 90˝ 96˝ 102˝ 108˝ 114˝ 120˝ 126˝ 132˝ 138˝ 144˝

322 359 379 435 473 509 549 567 625 601 699 738 775 813 851 889 930

1219 1372 1524 1676 1829 1981 2134 2286 2438 2591 2743 2896 3048 3200 3353 3505 3658

146.1 162.9 171.9 197.3 214.6 231.9 249.0 257.2 283.5 272.6 317.1 334.8 351.5 368.8 386.0 403.3 421.8

69.5 76.9 84.0 91.5 98.5 112.9 127.5 131.0 134.5 138.1 141.7 148.9 156.0 163.5 170.5 177.7 184.9

model # HEIA96-48 HEIA96-54 HEIA96-60 HEIA96-66 HEIA96-72 HEIA96-78 HEIA96-84 HEIA96-90 HEIA96-96 HEIA96-102 HEIA96-108 HEIA96-114 HEIA96-120 HEIA96-126 HEIA96-132 HEIA96-138 HEIA96-144

list 8033 9047 10044 11039 12055 13049 14062 15058 16071 17076 18064 19078 20075 21081 22083 24031 25987

Service for over 60 years.

Quality... Value... Reliability!

Dishwasher Condensate Vents, DVS Series see spec sheets EG50.07B

EG55.03

FEATURES:

• Mounts to dishwasher end vents. • Seams are continuously liquid-tight. • 18 gauge type 304 stainless steel. Note: Prices do not include the following: Installation supplies and materials, hanging of ventilator, exhaust and supply fans, curbs, ductwork, transitions, penetrating and sealing of roof or ceiling, trim, flashing, permits, fire protection system or tests, air balancing, electrical of any nature or any special requirements from local authorities.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

outer width x length x height* in. mm 4˝ x 16˝ x 48˝ 4˝ x 16˝ x 60˝ 4˝ x 16˝ x 72˝

102 x 406 x 1219 102 x 406 x 1524 102 x 406 x 1829

weight lbs. kg 60 75 90

27.2 34.0 40.8

model # DVS-48 DVS-60 DVS-72

list price each 1241 1359 1463

* If you have other size requirements, please call the factory. Outer width and length dimensions exclude flange.

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

301


SPEC AIR® VENTILATION HOODS Catalog Section 55

Dishwasher Condensate and Type II NFPA-96 for TYPE II Hoods, HDC Series see spec sheets EG50.07B

EG55.03 FEATURES:

• 12˝ x 12˝ (305 x 305mm) collar opening for exhaust connection. • 20˝ (508mm) height. • Type 304 stainless steel construction. • Full perimeter gutter and drain tube located on the left. Note: For Type II applications, optional baffles are required. To order, add suffix “S” to model number (example: HDC3636S) and 30% to list price.

overall width x length* in. mm 36˝ x 36˝ 36˝ x 42˝ 36˝ x 48˝ 42˝ x 42˝ 48˝ x 48˝

914 x 914 914 x 1067 914 x 1219 1067 x 1067 1219 x 1219

Prices do not include the following: Installation supplies and materials, hanging of ventilator, exhaust and supply fans, curbs, ductwork, transitions, penetrating and sealing of roof or ceiling, trim, flashing, permits, fire protection system or tests, air balancing, electrical of any nature or any special requirements from local authorities.

weight cubic lbs. kg feet model # 105 47.6 41.7 HDC3636 115 52.2 43.5 HDC3642 125 56.7 52.5 HDC3648 135 61.2 53.5 HDC4242 150 68.0 66.2 HDC4848

list 2418 2713 2863 3076 3562

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

* If you have other size requirements, please call the factory.

SPEC AIR® Ventilation Hood Accessories see spec sheet

EG55.05

Filter Frames (Maryland, Virginia, Washington D.C. Code) Stainless steel. model # E168

Note: To order the following ventilation hood accessories or options, include quantity and model number of each desired accessory or option with the model number of the ventilation hood ordered. Example: an “HEB96-48” hood (page 300), when accompanied with “E161,” indicates a hood with optional stainless steel trim strip on the front.

list each 107

(•) MTS (made to stock) / ( ) MTO (made to order)

Extra Grease Cups (#11) model # 331677

list each 94

Extra Grease Filters (#12) 20˝ x 20˝ (508 x 508mm), baffle type. ALUMINUM model # 332493

STAINLESS STEEL list each model # list each 78 332494 137

grease cups

Stainless Steel Trim Strips

grease filter

Seals off ceilings and/or walls description on front side of unit on back side of unit on left side of unit on right side of unit

302

model # E161 E162 E163 E164

list per linear foot 27 27 27 27

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


SPEC AIR® VENTILATION HOODS Catalog Section 55

SPEC AIR® Ventilation Hood Accessories see spec sheet

Note: To order the following ventilation hood accessories or options, include quantity and model number of each desired accessory or option with the model number of the ventilation hood ordered. Example: an “HEB96-48” hood (page 300), when accompanied with “E161,” indicates a hood with optional stainless steel trim strip on the front.

EG55.05

Extra Bullet Lights (#1) - Vapor proof. model # E170

list each 307

(•) MTS (made to stock) / ( ) MTO (made to order)

3˝ (76mm) Air Space on sides (#2) For vent hoods placed in corners or near neighboring walls. description

model # E150 E151 E152

on front side of unit on left side of unit on right side of unit

list $67 per linear foot 284 per side 284 per side

bullet light

Insulated Back (#3) - Reduces condensation description

model # E153 E154 E155 E156

on front side of unit on back side of unit on left side of unit on right side of unit

list per linear foot 67 67 67 67

Stainless Steel Furring Channel (#4) Used primarily for display signs, menus etc. description

model # E157 E158 E159 E160

on front side of unit on back side of unit on left side of unit on right side of unit

list per linear foot 138 138 138 138

Enclosure Panels (#5) 24˝ (610mm) height. Seals off ceilings and/or walls. Includes trim strips. model # E174

list per linear foot 219

Additional Collars (#6) description

model # E165 E166

extra exhaust collar extra supply collar

list each 517 517

Additional Supply Fire Damper (#7) — Fusible link model # E167

list each 340

Light Switch (#8) Flush Mounted. 115 VAC. Field wiring required. model # E169

list each 232

Insulated Make-Up Air Plenum (#9) - Reduces condensation model # E175

list per linear foot 287 100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

Additional Mounting Channel (#10) 15⁄8" (41mm) square. 12 gauge galvanized steel. Single strut. Slotted. model # 361269

list per linear foot 34

303


NOTES ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________

304

____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


PANCO® Transport Systems Accessories/Components Cart Covers ....................................306 Casters ............................................322 Pan Stops ......................................322 Perimeter Bumpers ........................322 Rotary Bumpers..............................322 Universal Angle Racks ....................322 Vertical Corner Bumpers ................322

Stepped-Angle ................................325 Universal Pan ..................................324 Universal Roll-In ............................324

Pans Aluminum Sheet ............................321 NSF Sheet ......................................321

Racks

Carts Banquet ..........................................318 Mobile Platform ..............................321 Open Bus Box ................................318

Dolly Bun Pan ..........................................319 Glass Rack ......................................320 Pan Truck ........................................320

LIFETIME Series Racks Bun Pan ..........................................323 Dunnage..........................................323 Enclosed Pan ..................................325

18 Series Deluxe ............................306 18 Series Working Height ..............307 26 Series ........................................307 All-Welded Pan................................308 Aluminum Dunnage ........................319 Aluminum with Side Panels ............309 Can..................................................314 Carrier ............................................308 Combination....................................310 Compartment ..................................310 Donut ..............................................317 Drip ................................................320 Multiple Purpose ............................311 Nesting Dunnage ............................319

Open Lug ........................................317 Oval Tray ........................................312 Oven................................................314 Pizza Dough Box ............................316 Pizza Pan ........................................316 Platter ............................................315 Roll-In Refrigerator ........................313 Stainless Steel ................................309 Universal Angle ..............................311 Wire Pan ........................................315 “Z” Type Nesting ............................313

Transport Holding Cabinets Heated Cabinets ......................327-328 Heated/Proofing Cabinets ........331-332 Proofing Cabinets ....................329-330 Slides ..............................................335 Cook & Hold Cabinets ....................335

A simple solution to a frustrating situation…

“HOW CAN WE GET ALL THIS FROM HERE TO THERE?” PANCO® Transport Racks provide the most efficient way to handle the many items required in the preparation, serving and storage of your products.

PANCO® Transport Racks succeed in pairing efficiency with durability. Developed in conjunction with the needs of the customer, the following features make PANCO® mobile open utility racks the choice of the foodservice industry. • Designed with the end user in mind to endure the test of time. All PANCO® racks are constructed of stainless steel or high-strength extruded aluminum sections. • Units roll, glide and maneuver easily with non-marking NSF® approved swivel casters. • Rack slides are designed to fit most popular tray sizes and are configured to accommodate a variety of products. • Available in several widths and heights, PANCO® provides the perfect size open transport rack to fit your needs. • While all transport units can also be used as storage areas, there are workstation and refrigerator roll-in models as well.

305


TRANSPORT SYSTEMS Catalog Section 60

18 Series Deluxe Racks see spec sheet EG60.00A

FEATURES:

Optional Perimeter Bumper

description full perimeter bumper

4

1.8

For 18˝ x 26˝ (457 x 660mm) pans. Narrow opening. 5˝ (127mm) casters. Front-to-back and side-to-side crossbracing. 1˝ (25mm) square tubing. Aluminum models shipped knocked down. Stainless steel models assembled. Dimensions shown include caster hub. Add 23⁄4˝ (70mm) to depth for caster trail.

Note:

• Factory welded assembly is required on aluminum knocked-down units specified with perimeter bumpers. weight lbs. kg

• • • • • • • • •

Accessories available include casters with locking brakes, rotary donut bumpers, vertical corner bumpers, and pan stops. See page 322.

Freight class is 70.0.

accessory add to model # unit list D 300

(•) MTS (made to stock) / ( ) MTO (made to order)

Optional Factory Assembly

Aluminum overall dimensions width x depth x height in. mm 21˝ x 261⁄2˝ x 641⁄4˝ 21˝ x 261⁄2˝ x 641⁄4˝ 21˝ x 261⁄2˝ x 691⁄4˝ 21˝ x 261⁄2˝ x 691⁄4˝

533 x 673 x 1632 533 x 673 x 1632 533 x 673 x 1759 533 x 673 x 1759

sliding space pan weight cu in. mm capacity lbs. kg ft model # 5˝ 127 11 29 13.2 4 OUR-1811-5 • 3˝ 76 18 36 16.3 4 OUR-1818-3 • 3˝ 76 20 37 16.8 4 OUR-1820-3 • 21⁄4˝ 57 24 42 19.1 4 OUR-1824-2 •

• For aluminum units that would otherwise be shipped knocked down. list 500 620 627 724

accessory model # L

add to unit list 172

Stainless steel overall dimensions width x depth x height in. mm 201⁄2˝ x 28˝ x 661⁄2˝ 201⁄2˝ x 28˝ x 661⁄2˝ 201⁄2˝ x 28˝ x 721⁄8˝ 201⁄2˝ x 28˝ x 661⁄2˝

521 x 711 x 1689 521 x 711 x 1689 521 x 711 x 1832 521 x 711 x 1689

sliding space pan weight cu in. mm capacity lbs. kg ft model # 5˝ 127 11 105 47.6 27 OUR-1811-5-SR 3˝ 76 18 122 55.3 27 OUR-1818-3-SR 3˝ 76 20 127 57.6 27 OUR-1820-3-SR 21⁄4˝ 57 24 137 62.1 27 OUR-1824-2-SR

list 1789 2241 2395 2463

Optional Cart Covers for 18 Series Racks • • • •

Covers are fire, mildew, and rot resistant. Easy to clean, waterproof, and feature dual zippers. Available in white PVC laminate or transparent. White laminate features a clear window on one narrow side. width x depth x height in. mm 24˝ x 30˝ x 611⁄2˝

610 x 762 x 1562

24˝ x 30˝ x 69˝

610 x 762 x 1753

fits units OUR-1811-5 OUR-1818-3 OUR-1824-2 OUR-1820-3

WHITE TRANSPARENT model # list model # list P2RCW-3

287

P2RC-3

209

P2RCW-4

287

P2RC-4

209 rack with optional transparent cart cover

306

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

rack with optional white cart cover


TRANSPORT SYSTEMS Catalog Section 60

18 Series Working Height Rack see spec sheet EG60.00B

Optional Factory Assembly optional hardwood and pans

• For aluminum units that would otherwise be shipped knocked down. accessory model # L

add to unit list 163

FEATURES:

• • • • • • • •

For 18˝ x 26˝ (457 x 660mm) pans. Top pan guides. Outrigger pan mount. 5˝ (127mm) swivel casters. Aluminum models shipped knocked down. Stainless steel models assembled. Dimensions shown include caster hub. Add 23⁄4˝ (70mm) to depth for caster trail.

Note:

Optional Tops for Working Height Rack description

weight lbs. kg

hardwood for OUR-1807-3 poly top for OUR-1807-3 stainless steel top for OUR-1807-3

30 25 30

overall dimensions width x depth x height in. mm 22˝ x 283⁄8˝ x 35˝

559 x 721 x 889

13.6 11.3 13.6

Accessories available include casters with locking brakes, rotary donut bumpers, vertical corner bumpers, and pan stops. See page 322.

Freight class is 70.0. model # 606376 606377 606378

list 503 599 484

(•) MTS (made to stock) / ( ) MTO (made to order)

sliding ALUMINUM* STAINLESS STEEL space pan weight cu weight cu in. mm capacity lbs. kg ft model # list lbs. kg ft model # list 3˝ 76 9** 29 13.2 3.6 OUR-1807-3 905 78 35.4 12.7 OUR-1807-3-SR 1707

* Factory assembly available for all aluminum models. See page 322. ** Total pan capacity is 9 when outrigger pan mounts are in use.

26 Series Racks see spec sheet

EG60.01

Optional Perimeter Bumper • Factory welded assembly is required on aluminum knocked-down units specified with perimeter bumpers. description

weight lbs. kg

full perimeter bumper

4

1.8

FEATURES:

• • • • • • • • •

For 18˝ x 26˝ (457 x 660mm) sheet pans. Aluminum and stainless steel models available. Wide opening. 5˝ (127mm) casters. Front-to-back/side-to-side crossbracing. Aluminum models shipped knocked down. Stainless steel models shipped assembled. Dimensions shown include caster hub. Add 23⁄4˝ (70mm) to depth for caster trail.

Note:

accessory add to model # unit list D 300

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Aluminum overall dimensions width x depth x height in. mm 281⁄2˝ x 19˝ x 69˝ 281⁄2˝ x 20˝ x 663⁄8˝ 281⁄2˝ x 20˝ x 72˝ 281⁄2˝ x 20˝ x 663⁄8˝

724 x 483 x 1753 724 x 508 x 1686 724 x 508 x 1829 724 x 508 x 1686

sliding space pan weight cu in. mm capacity lbs. kg ft model # 5˝ 127 12 37 16.8 10 OUR-2611-5 3˝ 76 18 43 19.5 10 OUR-2618-3 3˝ 76 20 53 24.0 10 OUR-2620-3 21⁄4˝ 57 24 56 25.4 10 OUR-2624-2

Accessories available include casters with locking brakes, rotary donut bumpers, vertical corner bumpers, and pan stops. See page 322.

Optional Factory Assembly list 581 732 742 848

• For aluminum units that would otherwise be shipped knocked down. accessory model # L

add to unit list 172

Stainless Steel overall dimensions width x depth x height in. mm 281⁄2˝ x 20˝ x 663⁄8˝ 281⁄2˝ x 20˝ x 663⁄8˝ 281⁄2˝ x 20˝ x 721⁄2˝ 281⁄2˝ x 20˝ x 663⁄8˝

724 x 508 x 1686 724 x 508 x 1686 724 x 508 x 1842 724 x 508 x 1686

sliding space pan weight cu in. mm capacity lbs. kg ft model # 5˝ 127 11 112 50.8 27 OUR-2611-5-SR 3˝ 76 18 129 58.5 27 OUR-2618-3-SR 3˝ 76 20 158 71.6 27 OUR-2620-3-SR 21⁄4˝ 57 24 161 73.0 27 OUR-2624-2-SR

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

list 2314 2387 2457 2525

307


TRANSPORT SYSTEMS Catalog Section 60

All-Welded Pan Racks see spec sheet

EG60.02 FEATURES:

• • • • •

For 18˝ x 26˝ (457 x 660mm) pans. Heavy duty all-welded aluminum construction. 5˝ (127mm) stem casters. 1˝ (25mm) square tubing. Side-to-side crossbracing.

Note:

Accessories available include casters with locking brakes, rotary donut bumpers, vertical corner bumpers, perimeter bumper and pan stops. See page 322.

Freight class is 300.0. (•) MTS (made to stock) / ( ) MTO (made to order)

18 Series overall dimensions width x depth x height in. mm

description front load front load front load front load

201⁄2˝ x 26˝ x 38˝ 201⁄2˝ x 26˝ x 69˝ 201⁄2˝ x 26˝ x 69˝ 201⁄2˝ x 26˝ x 69˝

weight lbs. kg

518 x 660 x 965 518 x 660 x 1753 518 x 660 x 1753 518 x 660 x 1753

19 25 38 47

8.6 11.3 17.2 21.3

sliding full size cu space pan ft in. mm capacity model # 14.7 3˝ 76 10 OUR-1810-3/W*• 25.8 5˝ 127 12 OUR-1812-5/W 21.0 3˝ 76 20 OUR-1820-3/W • 21.0 2˝ 51 30 OUR-1830-2/W •

list 622 627 675 974

sliding full size cu space pan ft in. mm capacity model # 25.2 5˝ 127 12 OUR-2612-5/W 25.2 3˝ 76 20 OUR-2620-3/W 25.2 2˝ 51 30 OUR-2630-2/W

list 778 884 936

26 Series

#OUR-1830-2/W

overall dimensions width x depth x height in. mm

description side load side load side load

weight lbs. kg

281⁄2˝ x 20˝ x 721⁄4˝ 724 x 457 x 1835 27 281⁄2˝ x 19˝ x 69˝ 724 x 483 x 1753 27 281⁄2˝ x 19˝ x 69˝ 724 x 483 x 1753 32

12.2 12.2 14.5

* Model #OUR-1810-3/W features stainless steel top. All other models feature open top.

Carrier Racks see spec sheet

EG60.05

Optional Perimeter Bumper • Factory welded assembly is required on aluminum knocked-down units specified with perimeter bumpers. description

weight lbs. kg

full perimeter bumper

4

1.8

FEATURES:

• • • • • • •

For 20˝ x 20˝ (508 x 508mm) utensil/glass racks. 5˝ (127mm) swivel casters. Aluminum and stainless steel models available. Aluminum models shipped knocked down. Stainless steel models shipped assembled. Dimensions shown include caster hub. Add 23⁄4˝ (70mm) to depth for caster trail.

Note:

accessory add to model # unit list D 300

Accessories available include casters with locking brakes, rotary donut bumpers, vertical corner bumpers, and pan stops. See page 322.

Freight class is 70.0.

Aluminum

(•) MTS (made to stock) / ( ) MTO (made to order)

overall dimensions width x depth x height in. mm 22˝ x 20 ⁄2˝ x 69˝ 22˝ x 201⁄2˝ x 65˝ 1

559 x 521 x 1753 559 x 521 x 1651

sliding space pan weight cu in. mm capacity lbs. kg ft model # 10˝ 254 6 44 20.0 12 OUR-2006-9A 7˝ 178 8 45 20.4 12 OUR-2008-6A

list 851 863

223⁄4˝ x 221⁄2˝ x 653⁄4˝ 223⁄4˝ x 221⁄2˝ x 641⁄4˝

308

578 x 572 x 1670 578 x 572 x 1629

sliding space pan weight cu in. mm capacity lbs. kg ft model # 9˝ 254 6 100 45.4 22 OUR-2006-9SR 61⁄2˝ 178 8 102 46.3 22 OUR-2008-6SR

• For aluminum units that would otherwise be shipped knocked down. accessory model # L

Stainless Steel overall dimensions width x depth x height in. mm

Optional Factory Assembly

list 1628 1651

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

add to unit list 172


TRANSPORT SYSTEMS Catalog Section 60 • • • • • • •

Stainless Steel Racks see spec sheet

EG60.03

FEATURES:

For 12˝ x 20˝ (305 x 508mm) pans. Stainless steel models only. 5˝ (127mm) swivel casters. Stainless steel channel tray slides. Shipped assembled. Dimensions shown include caster hub. Add 23⁄4˝ (70mm) to depth for caster trail.

Note:

Accessories available include casters with locking brakes, rotary donut bumpers, vertical corner bumpers, perimeter bumper and pan stops. See page 322.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

overall dimensions width x depth x height in. mm

description

single width 161⁄8˝ x 223⁄4˝ x 641⁄2˝ double width 311⁄4˝ x 223⁄4˝ x 647⁄8˝

410 x 578 x 1638 794 x 578 x 1648

127 250

57.6 113.4

Aluminum Racks with Side Panels see spec sheet

EG60.07

sliding full size space pan in. mm capacity model # 3˝ 76 18 OUR-1218-3-SR 3˝ 76 36 OUR-1236-3-SR

weight cu lbs. kg ft

#ORO-1840:

15 27

• Shipped knocked down. • 5˝ (127mm) swivel casters. Note:

#OR-1840:

list 2073 4441

Accessories available for this model include casters with locking brakes, vertical corner bumpers, and pan stops. See page 322.

• Shipped assembled • Solid top and bottom. • 5˝ (127mm) swivel casters. Note:

Accessories available for this model include casters with locking brakes, rotary donut bumpers, vertical corner bumpers, and pan stops. See page 322.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

overall dimensions width x depth x height in. mm 203⁄4˝ x 28˝ x 703⁄8˝ 207⁄8˝ x 28˝ x 703⁄8˝

527 x 711 x 1788 530 x 711 x 1788

description standard heavy duty

sliding 18˝ x 26˝ weight cubic space tray lbs. kg feet in. mm capacity model # 68 30.8 15.0 11⁄2˝ 38 40 ORO-1840 88 39.9 25.1 11⁄2˝ 38 40 OR-1840

list 2088 2693

Optional Perimeter Bumper

Optional Factory Assembly

• Factory welded assembly is required on aluminum knocked-down units specified with perimeter bumpers.

• For aluminum units that would otherwise be shipped knocked down.

description

weight lbs. kg

full perimeter bumper

4

1.8

accessory add to model # unit list D 300

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

accessory model # L

add to unit list 172

309


TRANSPORT SYSTEMS Catalog Section 60

Combination Racks see spec sheet

EG60.04

FEATURES:

• For 12˝ x 20˝ (305 x 508mm) pans, 18˝ x 26˝ (457 x 660mm) sheet pans or 14˝ x 18˝ (356 x 457mm) trays. • Aluminum models only. • 5˝ (127mm) swivel casters. • Shipped assembled. • Dimensions shown include caster hub. • Add 23⁄4˝ (70mm) to depth for caster trail. Note:

Accessories available include casters with locking brakes, rotary donut bumpers, perimeter bumper, vertical corner bumpers, and pan stops. See page 322.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

overall dimensions width x depth x height in. mm 201⁄2˝ x 291⁄2˝ x 667⁄8˝ 521 x 749 x 1699 201⁄2˝ x 291⁄2˝ x 661⁄2˝ 521 x 749 x 1689

weight lbs. kg 70 75

31.8 34.0

sliding pan/tray capacity cu space 12˝ x 20˝ 18˝ x 26˝ 14˝ x 18˝ ft in. mm pan tray tray model # 27 5˝ 127 11 11 22 OUR-1211-5 27 3˝ 76 18 18 36 OUR-1220-3

Compartment Racks see spec sheets EG60.06A EG60.06B

DOUBLE FEATURES:

double-compartment rack four-compartment rack Note:

FOUR FEATURES:

Accessories available include casters with locking brakes, rotary donut bumpers, perimeter bumper, vertical corner bumpers, and pan stops for double racks. See page 322.

• • • • • •

list 1251 1374

For 18˝ x 26˝ (457 x 660mm) sheet pans. 5˝ (127mm) swivel casters. Aluminum and stainless steel models available. All models shipped assembled. Dimensions shown include caster hub. Add 23⁄4˝ (70mm) to depth for caster trail.

• For 10˝ x 14˝ (254 x 356mm) trays or 14˝ x 18˝ (356 x 457mm) trays. • 5˝ (127mm) swivel casters. • Aluminum models only. • Shipped assembled with center tray stop. • Dimensions shown include caster hub. • Add 23⁄4˝ (70mm) to depth for caster trail. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Double-Compartment Tray Racks overall dimensions width x depth x height in. mm

cu ft

40˝ x 28˝ x 661⁄2˝ 1016 x 711 x 1689 45 40˝ x 28˝ x 661⁄2˝ 1016 x 711 x 1689 45 40˝ x 28˝ x 661⁄2˝ 1016 x 711 x 1689 45

sliding ALUMINUM space pan weight in. mm capacity lbs. kg model # 5˝ 127 22 135 61.2 OUR-1822-5 3˝ 76 36 150 68.0 OUR-1836-3 21⁄4˝ 57 48 176 79.8 OUR-1848-2

list 2076 2427 2769

STAINLESS STEEL weight lbs. kg model # 270 122.5 OUR-1822-5-SR 300 136.1 OUR-1836-3-SR 350 158.8 OUR-1848-2-SR

Four-Compartment Tray Racks overall dimensions width x depth x height in. mm 40˝ x 30˝ x 693⁄4˝ 32˝ x 22˝ x 693⁄4˝ 343⁄4˝ x 241⁄2˝ x 685⁄8˝

310

1016 x 762 x 1772 813 x 559 x 1772 883 x 622 x 1743

sliding weight cubic space lbs. kg feet in. mm 154 100 100

69.9 45.4 45.4

51 34 35

41⁄2˝ 41⁄2˝ 41⁄2˝

114 114 114

tray capacity tray size quantity model # 14˝ x 18˝ 52 OUR-1452-4 10˝ x 14˝ 52 OUR-1052-4-A 10˝ x 143⁄4˝ 52 OUR-1052-4-B

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

list 2457 2407 2286

list 4228 5385 6142


TRANSPORT SYSTEMS Catalog Section 60

Multiple Purpose Racks see spec sheet

EG60.10

FEATURES:

• Adjustable universal slides accommodate almost any popular size tray or pan (see chart). • 5˝ (127mm) swivel casters. • Slides adjustable in increments of 21⁄2˝ (64mm). • Channel base. • Aluminum models only. • Shipped assembled. Note:

Accessories available include casters with locking brakes, pan stops, extra universal angle slides, and rotary bumpers. See page 322.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

overall dimensions width x depth x height in. mm 253⁄16˝ x 28˝ x 693⁄8˝ 253⁄16˝ x 28˝ x 693⁄8˝

weight cubic lbs. kg feet

640 x 711 x 1762 640 x 711 x 1762

71 81

32.2 36.7

30 30

universal slides supplied 10 sets 12 sets

model # MPR-10 MPR-12

list 1277 1383

Pan/Tray Sizes for Multiple Purpose Rack width x depth x height in. mm 107⁄8˝ x 193⁄4˝ x 21⁄4˝ 276 x 502 x 57 107⁄8˝ x 193⁄4˝ x 31⁄2˝ 276 x 502 x 89 117⁄8˝ x 20˝ x 61⁄2˝ 302 x 508 x 165 305 x 508 x 64 12˝ x 20˝ x 21⁄2˝ 12˝ x 20˝ x 4˝ 305 x 508 x 102 12˝ x 20˝ x 6˝ 305 x 508 x 152 305 x 457 x 64 12˝ x 18˝ x 21⁄2˝ 12˝ x 18˝ x 4 305 x 457 x 102

width x depth x height in. mm 12˝ x 18˝ x 6˝ 305 x 457 x 152 14˝ x 18˝ 356 x 457 15˝ x 20˝ 381 x 508 20˝ x 20˝ 508 x 508 221⁄2˝ x 201⁄2˝ x 61⁄2˝ 571 x 521 x 165 508 x 559 x 32 20˝ x 22˝ x 11⁄4˝ 20˝ x 22˝ x 21⁄4˝ 508 x 559 x 57 508 x 559 x 89 20˝ x 22˝ x 31⁄2˝

width x depth x height in. mm 18˝ x 26˝ x 1˝ 457 x 660 x 25 18˝ x 26˝ x 23⁄16˝ 457 x 660 x 56 18˝ x 26˝ x 31⁄2˝ 457 x 660 x 89 18˝ x 26˝ x 4˝ 457 x 660 x 102 18˝ x 26˝ 457 x 660 18˝ x 13˝ x 1˝ 457 x 330 x 25 18˝ x 13˝ x 4˝ 457 x 330 x 102

Universal Angle Racks see spec sheet

EG60.12

FEATURES:

• Each set of universal slides holds two 12˝ x 20˝ (305 x 508mm) pans, plus one 18˝ x 26˝ (457 x 660mm) sheet pan, one 15˝ x 20˝ (381 x 508mm) tray or one 20˝ x 20˝ (305 x 305mm) rack. • Adjustable universal slides, solid top, solid bottom, and 5˝ (127mm) swivel plate casters. • Aluminum and stainless steel models available. • Shipped assembled. Note:

Accessories available include casters with locking brakes, perimeter bumper, pan stops, and extra universal angle slides. See page 322.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

overall dimensions width x depth x height in. mm 231⁄2˝ x 26˝ x 643⁄8˝ 231⁄2˝ x 26˝ x 693⁄8˝

597 x 660 x 1635 597 x 660 x 1762

cu ft 23 24

sliding number ALUMINUM space of weight in. mm slides lbs. kg model # 21⁄2˝ 64 11 127 57.6 UAR-64-A 21⁄2˝ 64 13 135 61.2 UAR-70-A

STAINLESS STEEL* weight list lbs. kg model # list 2205 140 63.5 UAR-64-SR 2528 2241 147 66.7 UAR-70-SR 2760

*All stainless steel units are supplied with standard extruded aluminum universal slides. 100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

311


TRANSPORT SYSTEMS Catalog Section 60

Oval Tray Racks - Vertical see spec sheet EG60.09A

FEATURES:

• • • • • • • •

For 23˝ x 28˝ (584 x 711mm) oval trays. 5˝ (127mm) swivel casters. Dimensions shown include caster hub. Add 23⁄4˝ (70mm) to depth for caster trail. Bottom panel sloped toward center. Single-tier and double-tier models available. Aluminum and stainless steel. All units shipped assembled.

Note:

Accessories available include casters with locking brakes, rotary donut bumpers, and vertical corner bumpers. See page 322.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

overall dimensions width x depth x height in. mm 261⁄4˝ x 311⁄4˝ x 381⁄2˝ 261⁄4˝ x 311⁄4˝ x 66˝

667 x 794 x 978 667 x 794 x 1676

ALUMINUM cu tray weight ft capacity lbs. kg model # list 20 40 60 27.2 OTS-128-A 1349 33 80 110 49.9 OTS-228-A * 1744

STAINLESS STEEL weight lbs. kg model # list 100 45.4 OTS-128-SR 2321 150 68.0 OTS-228-SR * 2852

* Double-tier models

Oval Tray Racks - Horizontal see spec sheet EG60.09B

FEATURES:

• • • • • •

For 23˝ x 28˝ (584 x 711mm) oval trays. 5˝ (127mm) swivel casters. Dimensions shown include caster hub. Add 23⁄4˝ (70mm) to depth for caster trail. Vertical tubing to prevent trays from extending out. All-welded aluminum models only.

Note:

Accessories available include casters with locking brakes, rotary donut bumpers, perimeter bumper, vertical corner bumpers, and pan stops. See page 322.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

overall dimensions width x depth x height in. mm 26˝ x 30˝ x 69˝ 27˝ x 291⁄2˝ x 721⁄8˝

312

660 x 762 x 1753 686 x 749 x 1832

sliding weight cubic space tray lbs. kg feet in. mm capacity 28 35

12.7 15.9

34.6 34.6

6˝ 3˝

152 76

10 20

model # OTR-2810-A/W • OTR-2820-A/W

list 965 1346

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


TRANSPORT SYSTEMS Catalog Section 60

Roll-In Refrigerator Racks see spec sheets EG60.13A EG60.13B

FEATURES:

• Models UARR employ universal slides. • Units fit specifications of most major refrigerator manufacturers, including Hobart, Traulsen, Victory, and McCall. • Dolly frame with recessed plate casters. • Aluminum and stainless steel models available. • Shipped assembled. Note:

Accessories available include casters with locking brakes and pan stops. See page 322.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Aluminum overall dimensions width x depth x height in. mm

weight lbs. kg

sliding cu space ft in. mm

tray sizes in. mm

tray capacity model # 24 OURR-1824-2-A 18 OURR-1818-3-A 11 OURR-1811-5-A 36* OURR-2036-3-A ** UARR-64-A

list

201⁄2˝ x 26˝ x 64˝ 521 x 660 x 1626 62 28.1 20 21⁄4˝ 57 18˝ x 26˝ 457 x 660 1408 201⁄2˝ x 26˝ x 64˝ 521 x 660 x 1626 52 23.6 20 3˝ 76 18˝ x 26˝ 457 x 660 1373 201⁄2˝ x 26˝ x 64˝ 521 x 660 x 1626 42 19.1 20 5˝ 127 18˝ x 26˝ 457 x 660 1251 23˝ x 26˝ x 64˝ 584 x 660 x 1626 62 28.1 20 3˝ 76 12˝ x 20˝ 305 x 508 2261 241⁄2˝ x 26˝ x 64˝ 622 x 660 x 1626 86 40.4 23 11⁄2˝ 38 UAS** 2213 * Two 12˝ x 20˝ (305 x 508mm) trays per set of tray slides. ** Model #UARR-64-A comes with 12 “stepped angle” Universal Angle Slides. Each set holds two 12˝ x 20˝ (305 x 508mm) pans, one 18˝ x 26˝ (457 x 660mm) tray, plus one 15˝ x 20˝ (381 x 508mm) tray or one 20˝ x 20˝ (305 x 305mm) rack.

Stainless Steel overall dimensions width x depth x height in. mm

weight lbs. kg

sliding cu space ft in. mm

tray sizes in. mm

tray capacity model # 24 OURR-1824-2-SR 18 OURR-1818-3-SR 11 OURR-1811-5-SR 36* OURR-2036-3-SR ** UARR-64-SR **

list

201⁄2˝ x 26˝ x 633⁄8˝ 521 x 660 x 1610 187 84.8 20 21⁄4˝ 57 18˝ x 26˝ 457 x 660 2665 201⁄2˝ x 26˝ x 633⁄8˝ 521 x 660 x 1610 151 68.5 20 3˝ 76 18˝ x 26˝ 457 x 660 2311 201⁄2˝ x 26˝ x 633⁄8˝ 521 x 660 x 1610 121 54.9 20 5˝ 127 18˝ x 26˝ 457 x 660 2131 23˝ x 26˝ x 64˝ 584 x 660 x 1626 154 69.9 20 3˝ 76 12˝ x 20˝ 305 x 508 2702 231⁄2˝ x 26˝ x 64˝ 597 x 660 x 1626 160 72.6 23 21⁄2˝ 64 UAS** 2626 * Two 12˝ x 20˝ (305 x 508mm) trays per set of tray slides. ** Model UARR-64-SR comes with 11 standard extruded aluminum Universal Angle Slides. Each set holds two 12˝ x 20˝ (305 x 508mm) pans, one 18˝ x 26˝ (457 x 660mm) tray, plus one 15˝ x 20˝ (381 x 508mm) tray or one 20˝ x 20˝ (305 x 305mm) rack.

“Z” Type Nesting Racks see spec sheet

EG60.29

When not in use, these racks take up less square footage than standard racks do by “nesting” inside each other. overall dimensions width x depth x height in. mm 201⁄2˝ x 26˝ x 691⁄2˝ 201⁄2˝ x 26˝ x 691⁄2˝

521 x 660 x 1765 521 x 660 x 1765

WEIGHT CAPACITY:

FEATURES:

• 1200lbs. max per unit. • 60lbs. max per slide • For 18˝ x 26˝ (457 x 660mm) pans. • All-welded aluminum construction. • 5˝ (127mm) plate casters. Note:

Accessories available include casters with locking brakes and vertical bumpers. See page 322.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

sliding weight cubic space pan lbs. kg feet in. mm capacity model # 72 32.7 22 3˝ 76 20 OUR-1820-3-N 86 39.0 22 2˝ 51 30 OUR-1830-2-N

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

list 1103 1117

313


TRANSPORT SYSTEMS Catalog Section 60

Can Racks see spec sheets EG60.15A EG60.15B

FEATURES:

• All racks constructed of high strength extruded aluminum sections. • All welded construction. • Full size models feature open top. • Half size models are available with aluminum tops (suffix “A”) or poly tops (suffix “AP”). • All mobile units feature heavy duty 4˝ (102mm) plate casters. Note:

Accessories available include casters with locking brakes, perimeter bumper, and vertical corner bumpers. See page 322.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

overall dimensions width x depth x height in. mm

description full size, stationary full size, mobile half size, mobile half size, mobile half size, mobile half size, mobile

25˝ x 35˝ x 71˝ 25˝ x 35˝ x 781⁄4˝ 25˝ x 35˝ x 35˝ 25˝ x 35˝ x 41˝ 251⁄2˝ x 351⁄8˝ x 323⁄8˝ 251⁄2˝ x 351⁄8˝ x 407⁄8˝

635 x 889 x 1803 635 x 889 x 1988 635 x 889 x 889 635 x 889 x 1041 648 x 892 x 822 648 x 892 x 1038

weight cu lbs. kg ft

sliding can space capacity in. mm #10 #5

63 63 39 36 51 54

71⁄2˝ 71⁄2˝ 71⁄2˝ 71⁄2˝ 71⁄2˝ 71⁄2˝

28.6 28.6 17.6 16.3 23.1 24.5

39.0 39.0 23.1 26.7 23.1 26.7

191 191 191 191 191 191

Oven Racks see spec sheet

EG60.16

FEATURES:

162 162 54 72 54 72

• • • • • •

216 216 72 96 72 96

model # FCR-10-9A • OCR-10-9A • OCR-10-3A OCR-10-4A OCR-10-3AP OCR-10-4AP

list 1201 1639 1151 1300 1294 1429

For 18˝ x 26˝ (457 x 660mm) pans. Aluminum. Heavy duty welded construction. 4˝ (102mm) oven plate casters. 1˝ (25mm) square tubing. Side-to-side crossbracing.

Note:

Accessories available include oven plate casters (rated up to 475˚F) and pan stop. See page 322.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Optional Accessories for Oven Racks description track pin

description front load front load front load front load front load side load side load side load side load side load

314

model # consult factory

overall dimensions width x depth x height in. mm 201⁄2˝ x 26˝ x 69˝ 201⁄2˝ x 26˝ x 69˝ 201⁄2˝ x 26˝ x 69˝ 201⁄2˝ x 26˝ x 69˝ 201⁄2˝ x 26˝ x 69˝ 19˝ x 281⁄2˝ x 69˝ 19˝ x 281⁄2˝ x 69˝ 19˝ x 281⁄2˝ x 69˝ 19˝ x 281⁄2˝ x 69˝ 19˝ x 281⁄2˝ x 69˝

521 x 660 x 1753 521 x 660 x 1753 521 x 660 x 1753 521 x 660 x 1753 521 x 660 x 1753 483 x 724 x 1753 483 x 724 x 1753 483 x 724 x 1753 483 x 724 x 1753 483 x 724 x 1753

list 77

weight lbs. kg 28 29 31 33 41 28 29 31 33 37

12.7 13.2 14.1 15.0 18.6 12.7 13.2 14.1 15.0 16.8

cu ft 25.6 25.6 25.6 25.6 25.6 24.9 24.9 24.9 24.9 24.9

sliding space pan in. mm capacity model # 6˝ 152 10 ORF-1810-6 5˝ 127 12 ORF-1812-5 4˝ 102 15 ORF-1815-4 3˝ 76 20 ORF-1820-3 2˝ 51 30 ORF-1830-2 6˝ 152 10 ORS-2610-6 5˝ 127 12 ORS-2612-5 4˝ 102 15 ORS-2615-4 3˝ 76 20 ORS-2620-3 2˝ 51 30 ORS-2630-2

list 716 758 787 904 944 691 728 746 817 933

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


TRANSPORT SYSTEMS Catalog Section 60

Platter Racks see spec sheet

EG60.14 FEATURES:

• Rack slides are designed to hold either 101⁄2˝ or 121⁄2˝ (267 or 318mm) plastic platters. • All racks are all welded aluminum construction. • 5˝ (127mm) casters. Note:

Accessories available include casters with locking brakes, perimeter bumper, vertical corner bumpers, and pan stops. See page 322.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

description half size half size full size full size half size half size full size full size

overall dimensions width x depth x height in. mm 137⁄8˝ x 30˝ x 383⁄4˝ 137⁄8˝ x 30˝ x 383⁄4˝ 137⁄8˝ x 30˝ x 691⁄4˝ 137⁄8˝ x 30˝ x 691⁄4˝ 157⁄8˝ x 30˝ x 383⁄4˝ 157⁄8˝ x 30˝ x 383⁄4˝ 157⁄8˝ x 30˝ x 691⁄4˝ 157⁄8˝ x 30˝ x 691⁄4˝

352 x 762 x 984 352 x 762 x 984 352 x 762 x 1759 352 x 762 x 1759 403 x 762 x 984 403 x 762 x 984 403 x 762 x 1759 403 x 762 x 1759

weight cu lbs. kg ft

sliding can space capacity in. mm #10 #5

18 18 26 27 19 17 28 25

6˝ 5˝ 6˝ 5˝ 6˝ 5˝ 6˝ 5˝

8.2 8.2 11.8 11.8 8.6 7.7 12.7 11.3

11.9 11.9 20.8 20.8 11.9 11.9 20.8 20.8

152 127 152 127 152 127 152 127

101⁄2˝ 101⁄2˝ 101⁄2˝ 101⁄2˝ 121⁄2˝ 121⁄2˝ 121⁄2˝ 121⁄2˝

platter cap.

267 267 267 267 318 318 318 318

5 6 10 12 5 6 10 12

model # OPL-10-5A OPL-10-6A OPL-10-10A OPL-10-12A OPL-12-5A OPL-12-6A OPL-12-10A OPL-12-12A

list 444 463 543 560 475 493 560 580

Plastic Pans and Platters for Platter Racks description white display pan white display pan white display pan platter platter platter

width x depth x height in. mm 18˝ x 26˝ x 11⁄8˝ 9˝ x 26˝ x 11⁄8˝ 12˝ x 18˝ x 11⁄8˝ 121⁄2˝ x 24˝ x 3⁄4˝ 121⁄2˝ x 30˝ x 3⁄4˝ 101⁄2˝ x 30˝ x 3⁄4˝

457 x 660 x 29 229 x 660 x 29 305 x 457 x 29 318 x 610 x 19 318 x 762 x 19 267 x 762 x 19

model # DP1826-W DP926-W DP1218-W PL1224 PL1230 PL1030

Wire Pan Racks see spec sheet

EG60.17

list 31 22 23 20 23 22

display pan

platter

• All welded aluminum square frame construction. • Front load and side load models offered. • Nickel chrome-plated steel wire racks, and 5˝ (127mm) casters. FEATURES: Note:

Accessories available include casters with locking brakes, rotary bumpers, perimeter bumper, vertical corner bumpers, and pan stop. See page 322.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

description front load side load

overall dimensions width x depth x height in. mm 201⁄2˝ x 28˝ x 69˝ 20˝ x 281⁄2˝ x 69˝

521 x 711 x 1753 508 x 724 x 1753

weight lbs. kg

cu ft

sliding space in. mm

64 64

26.9 26.6

11⁄2˝ 11⁄2˝

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

29.0 29.0

38 38

can capacity 36 36

model # WPR-FL-36 WPR-SL-36

list 884 944

315


TRANSPORT SYSTEMS Catalog Section 60 • • • • •

Pizza Pan Rack see spec sheet EG60.18A

FEATURES:

All welded aluminum construction. Adjustable and all-welded models available. Both models feature 5˝ (127mm) casters. Holds round and square pans. Adjustable model features adjustable pan opening for 10˝ to 16˝ (254 to 406mm) pans. • Knock-down construction. • All-welded model features solid aluminum top and slides that accommodate nominal 16˝ to 20˝ (406 to 508mm) pans.

Note:

Accessories available for both the pizza rack and pizza dough box rack below include casters with locking brakes, rotary bumpers, perimeter bumper, vertical corner bumpers, and pan stop. See page 322.

Freight class is 70.0.

pizza pan rack (all-welded)

pizza pan rack (adjustable)

(•) MTS (made to stock) / ( ) MTO (made to order)

overall dimensions width x depth x height in. mm

description adjustable all-welded

adj. x 133⁄8˝ x 343⁄4˝ 22˝ x 20˝ x 333⁄4˝

weight cu lbs. kg ft

adj. x 340 x 883 559 x 508 x 857

26 36

sliding space in. mm

11.8 2.0 2˝ 16.3 10.9 2˝

Pizza Dough Box Rack see spec sheet EG60.18B

51 51

can capacity 13 12

model # OUR-PZA-12A OUR-PZ-12A

list 819 932

• For 18˝ x 26˝ (457 x 660mm) pizza dough boxes. • Solid aluminum top. • All welded aluminum frame construction. • 5˝ (127mm) casters. • Holds pizza dough boxes. FEATURES: Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

overall dimensions width x depth x height in. mm 261⁄2˝ x 203⁄4˝ x 333⁄4˝

weight cubic lbs. kg feet

673 x 527 x 857

27

12.3 10.7

sliding space box in. mm capacity model # 33⁄4˝ 95 7 OUR-DB-7A

list 914

Pizza Dough Box Made of durable thermoplastic. Stackable design. 12 per carton. description pizza dough box cover

316

width x depth x height in. mm 18˝ x 26˝ x 3˝ 18˝ x 26˝

457 x 660 x 76 457 x 660

weight/dz. cu lbs. kg ft 46 14

20.9 6.4

1.2 0.6

model # PDB PDBC

list 78 73

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


TRANSPORT SYSTEMS Catalog Section 60

Donut Rack see spec sheet

EG60.22

FEATURES:

• • • • •

For 23˝ x 23˝ (584 x 584mm) donut screens. Heavy duty, all aluminum welded construction. Six crossbraces. 1˝ (25mm) square tubing, 5˝ (127mm) heavy duty casters.

Note:

Accessories available include casters with locking brakes, rotary bumpers, perimeter bumper, vertical corner bumpers, and pan stop. See page 322.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

in.

overall dimensions width x depth x height mm

261⁄4˝ x 24˝ x 691⁄4˝

weight cubic lbs. kg feet

667 x 610 x 1759

30

13.6 28.1

sliding 23˝ x 23˝ space (584 x 584mm) in. mm donut screen cap. model # 3˝ 76 20 ODR-2320-3

Open Lug Racks see spec sheet

EG60.19 FEATURES:

list 800

• For 16˝ x 251⁄8˝ x 81⁄2˝(406 x 638 x 216mm), maximum 10" deep, nesting lug bins. • All welded aluminum construction. • 5˝ (127mm) heavy duty casters. Note:

Accessories available include casters with locking brakes, rotary bumpers, perimeter bumper, vertical corner bumpers, and pan stop. See page 322.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

overall dimensions width x depth x height in. mm 191⁄2˝ x 263⁄4˝ x 70˝ 191⁄2˝ x 263⁄4˝ x 51˝ 19˝ x 26˝ x 313⁄8˝ 153⁄4˝ x 26˝ x 205⁄8˝

495 x 679 x 1778 495 x 679 x 1295 482 x 660 x 797 400 x 660 x 524

weight cubic lbs. kg feet

sliding space in. mm

lug capacity

25 20 13 9

1011⁄16˝ 272 1011⁄16˝ 272 1011⁄16˝ 272 n/a n/a

6 4 2 1

9.0 24.4 7.3 18.6 5.8 11.5 4.1 4.8

model # OLR-6A OLR-4A OLR-2A OLR-1A

list 444 363 523 489

Nesting Lug Bin width x depth x height in.

mm

16˝ x 251⁄8˝ x 81⁄2˝

406 x 638 x 216

model # NL1626

list 42

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

317


TRANSPORT SYSTEMS Catalog Section 60

Open Bus Box Cart see spec sheet

EG60.20 FEATURES:

• Holds three 213⁄4˝ x 153⁄4˝ x 5˝ (553 x 400 x 127mm) bus boxes. • All welded aluminum construction. • 5˝ (127mm) heavy duty casters Note:

Accessories available include casters with locking brakes, rotary bumpers, perimeter bumper, vertical corner bumpers, and pan stop. See page 322.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

overall dimensions width x depth x height in. mm 181⁄2˝ x 26˝ x 36˝

470 x 660 x 914

weight cubic lbs. kg feet

sliding space in. mm

26

10˝

11.8 11.6

254

box capacity 3

model # OBC-3A

list 433

Bus Box Tubs Made of high-density polyethylene. in.

width x length x depth mm

213⁄4˝ x 153⁄4˝ x 5˝ 213⁄4˝ x 153⁄4˝ x 7˝

553 x 400 x 127 553 x 400 x 178

model # BBT-5 BBT-7

list 39 40

Banquet Carts see product announcement

EG8198

FEATURES:

• Aluminum units feature all-welded aluminum construction. • Stainless steel units feature all-welded aluminum frame with stainless steel shelves. • Smooth radius handles and uprights. • Two handles—one on each end of unit. • Solid shelves with marine edge. • Standard perimeter bumper. • Heavy duty 8˝ x 2˝ (203 x 51mm) platform casters—two swivel, two rigid. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

stainless steel banquet cart

aluminum banquet cart

For transporting big loads for banquets, catering, and bussing. ALUMINUM depth x height in. mm 29˝ x 66˝ 29˝ x 66˝ 29˝ x 66˝ 29˝ x 66˝

318

737 x 1676 737 x 1676 737 x 1676 737 x 1676

weight shelf weight capacity # of length spacing lbs. kg lbs. kg shelves in. mm in. mm model # 147 66.7 3000 1360.8 5 62˝ 1575 12˝ 305 QM2962-5-A/D 180 81.6 2500 1134.0 5 75˝ 1905 12˝ 305 QM2975-5-A/D 135 61.2 2500 1134.0 4 62˝ 1575 161⁄2˝ 419 QM2962-4-A/D 156 70.8 3000 1360.8 6 62˝ 1575 91⁄4˝ 235 QM2962-6-A/D

STAINLESS STEEL shelf length spacing list in. mm in. mm 3286 651⁄2˝ 1664 101⁄2˝ 267 4294 761⁄2˝ 1943 101⁄2˝ 267 3086 651⁄2˝ 1664 141⁄2˝ 368 3746 651⁄2˝ 1664 81⁄4˝ 210

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

model # QM2966-5-SR/D QM2977-5-SR/D QM2966-4-SR/D QM2966-6-SR/D

list 4192 4916 3803 4880


TRANSPORT SYSTEMS Catalog Section 60

Aluminum Dunnage Racks see spec sheet

EG01.17

FEATURES:

• 11⁄2˝ (38mm) square tubing. • Plastic feet. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

20˝ width (508mm)

24˝ width (610mm)

length weight in. mm lbs. kg

cubic feet

36˝ 48˝ 60˝ 36˝ 48˝ 60˝

6.8 8.9 11.0 8.0 10.5 13.1

914 1219 1524 914 1219 1524

10 14 18 12 16 20

4.5 6.4 8.2 5.4 7.3 9.1

Nesting Dunnage Racks

weight RACKS WITH capacity number 8˝ (203mm) HEIGHT lbs. kg of lats model # list 2000 907 4 WDR203608-A • 234 2000 907 4 WDR204808-A • 272 1500 680 4 WDR206008-A • 306 2000 907 5 WDR243608-A • 264 2000 907 5 WDR244808-A • 297 1500 680 5 WDR246008-A • 342

FEATURES:

see spec sheet

RACKS WITH 12˝ (305mm) HEIGHT model # list WDR203612-A • 234 WDR204812-A • 272 WDR206012-A • 306 WDR243612-A • 264 WDR244812-A • 297 WDR246012-A • 342

• All-aluminum construction.

EG01.17

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Racks are stackable, saving space when not in use.

18˝ width (457mm)

2,700 to 3,200 lb.

12˝ 20˝ width height (508mm)

(1225 to 1452 kg) weight capacity.

(305mm)

24˝ width (610mm)

length in. mm

weight lbs. kg

24˝ 36˝ 48˝ 24˝ 36˝ 48˝ 24˝ 36˝ 48˝

8 10 12 8 10 12 9 11 14

610 914 1219 610 914 1219 610 914 1219

3.6 4.5 5.4 3.6 4.5 5.4 4.1 5.0 6.4

Bun Pan Dolly see spec sheet

EG60.21 FEATURES:

cubic feet 3.0 4.5 6.0 3.4 5.1 6.7 4.0 6.0 8.0

weight capacity lbs. kg 3200 3200 2700 3200 3200 2700 3200 3200 2700

1452 1452 1225 1452 1452 1225 1452 1452 1225

model # NDR182412-A NDR183612-A NDR184812-A NDR202412-A NDR203612-A NDR204812-A NDR242412-A NDR243612-A NDR244812-A

list 224 258 288 224 258 288 265 295 342

• For use with 18˝ x 26˝ (457 or 660mm) or 18˝ x 13˝ (457 or 330mm) bun pans. • Heavy duty welded, all-aluminum construction. • 5˝ (127mm) plate casters. • Shipped assembled. Note:

Accessories available include casters with locking brakes. See page 322.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

overall dimensions width x depth x height in. mm 187⁄8˝ x 27˝ x 7˝ 479 x 686 x 178

weight full size weight cubic capacity pan lbs. kg feet lbs. kg capacity 20

9.0

2.5

800

363

75

model # BPD-1826-A

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

list 341

319


TRANSPORT SYSTEMS Catalog Section 60 • • • •

Glass Rack Dolly see spec sheet

EG60.21 FEATURES:

For use with 20˝ x 20˝ (508 x 508mm) racks. Heavy duty welded all-aluminum construction. 5˝ (127mm) plate casters. Shipped assembled.

Note:

Accessories available include casters with locking brakes. See page 322.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

#GRD-2020-A

overall dimensions width x depth x height in. mm 205⁄8˝ x 225⁄8˝ x 91⁄4˝ 205⁄8˝ x 225⁄8˝ x 39˝

524 x 524 x 235 524 x 524 x 991

weight lbs. kg

weight capacity lbs. kg

21 25

1200 1200

9.5 11.3

cubic feet model # list 2.4 GRD-2020-A 400 9.0 GRDH-2020-A* 558

544 544

* #GRDH-2020-A comes with push handle.

• • • • •

Pan Truck see spec sheet

EG60.21 FEATURES:

For use with 18˝ x 26˝ (457 or 660mm) bun pans. Heavy duty all-aluminum construction. 1˝ (25mm) square tubing. 5˝ (127mm) casters. Rear pan strap.

Note:

Accessories available include casters with locking brakes. See page 322.

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

overall dimensions width x depth x height in. mm 21˝ x 27˝ x 331⁄2˝

534 x 686 x 851

weight lbs. kg

weight cubic capacity feet lbs. kg

14

12.3

6.4

Drip Racks see spec sheet EG60.23

FEATURES:

1000

454

full size pan capacity 75

model # PT-1826-A

list 525

• Designed to fit inside half size and full size PANCO® sheet pans. • Chrome (packed 12 per box). • Mat wires are crisscrossed, creating a 3 ⁄8˝ (10mm) mesh. • Integral supports hold the mat approximately 5 ⁄8˝ (16mm) off the working surface. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

description

pan shown with drip rack

320

half size rack full size rack

width x length x depth in. mm 117⁄8˝ x 161⁄8˝ x 3⁄4˝ 163⁄8˝ x 243⁄4˝ x 1˝

302 x 410 x 19 416 x 629 x 25

weight lbs. kg

cu ft

2 3

0.08 0.23

0.9 1.4

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

chrome model # DPRK1216C DPRK1725C

list 27 49


TRANSPORT SYSTEMS Catalog Section 60

Mobile Platform Carts see product announcement

EG8128

• Heavy duty all-aluminum construction. • 11⁄2˝ x 23⁄4˝ (38 x 70mm) square tubing. • 5˝ (127mm) casters—two swivel with brake and two rigid. • Lifetime guarantee against rust and corrosion; 5-year guarantee against workmanship and material defects. FEATURES: Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

overall dimensions width x depth x height in. mm

deck size width x depth in. mm

20˝ x 373⁄4˝ x 42˝ 508 x 959 x 1067 20˝ x 36˝ 20˝ x 493⁄4˝ x 42˝ 508 x 1264 x 1067 20˝ x 48˝ 20˝ x 613⁄4˝ x 42˝ 508 x 1569 x 1067 20˝ x 60˝

Aluminum Sheet Pans see spec sheet

EG60.23 FEATURES:

weight capacity lbs. kg

508 x 914 508 x 1219 508 x 1524

1200 1200 1200

544.3 544.3 544.3

model # 1202 1203 1212

list 607 669 779

• All aluminum pans feature a rust-resistant wire bead for rust-free durability and extended use. • Packed 12 per box. Freight class is 70.0.

end view of sheet pan

(•) MTS (made to stock) / ( ) MTO (made to order)

Solid Sheet Pans 18 gauge.

Made from H-24 3003 aluminum alloy, the industry’s best, proven to be harder and more durable.

dimensions in. mm

glazed, full size

17 ⁄4˝ x 25 ⁄8˝ 3

5

in.

solid, half size solid, full size

173⁄4˝ x 127⁄8˝ 173⁄4˝ x 255⁄8˝

451 x 651

model # SP1826-G

list per pan 41

description

in.

dimensions mm 451 x 327 451 x 651

list model # per pan PP1813-18 • 28 PP1826-18 • 33

Heavy Duty 16 Gauge Sheet Pan dimensions mm

description

in.

solid, full size

173⁄4˝ x 255⁄8˝

NSF Sheet Pans see spec sheet

451 x 327 451 x 651

list model # per pan SP1813-18 • 18 SP1826-18 • 24

Perforated Sheet Pans 18 gauge.

perforated, half size 173⁄4˝ x 127⁄8˝ perforated, full size 173⁄4˝ x 255⁄8˝

Glazed Sheet Pan 18 gauge. description

dimensions mm

description

EG60.23

end view of NSF sheet pan

FEATURES:

451 x 651

list model # per pan SP1826-16 • 33

• All NSF pans are solid and 12 gauge construction, heavier than the standard aluminum sheet pans. • Instead of a wire bead around the perimeter of the pan, the bead is open. • Packed 12 per box. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

dimensions description solid, full size, NSF solid, full size, clear anodized NSF 100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

in. 173⁄4˝ x 253⁄4˝ 173⁄4˝ x 253⁄4˝

mm 451 x 654 451 x 654

model # SP1826-N • SP1826-NCA

list per pan 65 78

321


TRANSPORT SYSTEMS Catalog Section 60

Accessories

Note:

see spec sheet

EG60.24

Casters with Locking Brakes For all units except Oven Racks. description

weight lbs. kg

set of two, with brake set of four, with brake

2 4

0.9 1.8

accessory model # A B

add to unit list 37 74

These accessory prices are for add-on at time of original purchase. To order accessories, add a slash “/” followed by suffix indicating corresponding option or accessory model number(s). For example, model number UAR-64-A/ADG indicates a universal angle rack with the following accessories: set of two casters with locking brakes (“A”), perimeter bumper (“D”), and aluminum pan stop (“G”).

Can be shipped UPS. (•) MTS (made to stock) / ( ) MTO (made to order)

Casters description 4˝ (102mm) hi-temp oven plate caster with built-in grease fitting 4˝ (102mm) hi-temp oven plate caster with brake 4˝ (102mm) plate caster with built-in grease fitting 4˝ (102mm) plate caster with brake 5˝ (127mm) pan truck caster 5˝ (127mm) stem caster 5˝ (127mm) stem caster with brake 5˝ (127mm) plate caster 5˝ (127mm) plate caster with brake

accessory model # 606587 606588 606589 606590 606593 606594 606595 606598 606599

list each 119 127 69 81 80 54 61 59 68

Vertical Corner Bumpers For all units. description

weight lbs. kg

set of four, 12˝ (305mm)

2

0.9

accessory add to model # unit list F 172

Rotary Bumpers For use with stem casters. description set of four, 5˝ (127mm) diameter

weight accessory lbs. kg model # 2 0.9 C

add to unit list 95

Perimeter Bumper • Factory welded assembly is required on aluminum knocked-down units specified with perimeter bumpers. description

weight lbs. kg

full perimeter bumper

4

1.8

accessory add to model # unit list D 300

Pan Stops Prevents pans and/or trays from sliding out of unit. description

weight lbs. kg

aluminum stainless steel

1 2

0.5 0.9

accessory add to model # unit list G 154 H 237

pan stop

Extra Universal Angle Slides Per pair. Accommodates a variety of different size trays and pans. description

weight lbs. kg

for multiple purpose rack for universal angle rack

5 5

322

2.3 2.3

accessory add to model # unit list 606379 98 606570 98

universal angle slide for multiple purpose rack

universal angle slide for universal angle rack

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


TRANSPORT SYSTEMS Catalog Section 60

LIFETIME Series Racks All heavy duty alloy aluminum fully welded construction.

LIFETIME Dunnage Racks see spec sheet

EG60.30 FEATURES:

LIFETIME GUARANTEE! against rust and corrosion, and against material defects and workmanship.

• All heavy duty type 6063-T5 alloy aluminum construction. • Fully-welded frame features 2˝ (51mm) square tubing, with feet capped and welded. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

overall dimensions width x length x height in. mm 20˝ x 36˝ x 12˝ 20˝ x 48˝ x 12˝ 20˝ x 60˝ x 12˝ 24˝ x 36˝ x 12˝ 24˝ x 48˝ x 12˝ 24˝ x 60˝ x 12˝ 30˝ x 48˝ x 12˝ 36˝ x 48˝ x 12˝

weight weight capacity lbs. kg lbs. kg

508 x 914 x 305 508 x 1219 x 305 508 x 1524 x 305 610 x 914 x 305 610 x 1219 x 305 610 x 1524 x 305 762 x 1219 x 305 914 x 1219 x 305

17 21 25 20 25 29 31 35

7.7 9.5 11.3 9.0 11.3 13.2 14.1 15.9

5000 4000 3400 4000 4000 4000 4000 4000

model # 4004 4005 4006 4008 4009 4010 4027 4065

2268 1814 1542 1814 1814 1814 1814 1814

• For 18˝ x 26˝ (457 x 660mm) pans. • All heavy duty 6063-T5 alloy aluminum type construction. • Fully-welded frame features 11⁄2˝ x 13⁄4˝ (38 x 45mm) “D”-shaped tubing. • Crossbracing consists of 1˝ (25mm) square tubing. • 11⁄2˝ (38mm) square tube base includes 6˝ x 2˝ (152 x 51mm) non-marking swivel plate casters. • 2˝ (51mm) wide aluminum angle slides are welded to frame. FEATURES:

LIFETIME Bun Pan Racks see spec sheet

list 513 568 626 598 666 733 806 946

EG60.31

Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

overall dimensions width x depth x height in. mm 211⁄2˝ x 26˝ x 73˝ 211⁄2˝ x 26˝ x 73˝ 211⁄2˝ x 26˝ x 73˝

546 x 660 x 1854 546 x 660 x 1854 546 x 660 x 1854

weight lbs. kg 86 70 54

39.0 31.6 24.5

slide spacing pan in. mm capacity model # 2˝ 51 30 4330 3˝ 76 20 4331 5˝ 127 12 4333

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

list 2464 2089 1859

323


TRANSPORT SYSTEMS Catalog Section 60

LIFETIME Universal Pan Racks see spec sheet

EG60.32

LIFETIME GUARANTEE! against rust and corrosion, and against material defects and workmanship.

FEATURES:

• For 12˝ x 20˝ (305 x 508mm) pans, 18˝ x 26˝ (457 x 660mm) pans, 13˝ x 18˝ (330 x 457mm) pans, or 14˝ x 18˝ (356 x 457mm) trays. • All heavy duty 6063-T5 alloy aluminum type construction. • Fully-welded frame features 11⁄2˝ x 13⁄4˝ (38 x 45mm) “D”-shaped tubing. • Crossbracing consists of 1˝ (25mm) square tubing. • 11⁄2˝ (38mm) square tube base includes 6˝ x 2˝ (152 x 51mm) non-marking recessed swivel plate casters. • 31⁄4˝ (86mm) wide aluminum angle slides are welded to frame. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

overall dimensions width x depth x height in. mm 211⁄2˝ x 26˝ x 73˝ 211⁄2˝ x 26˝ x 73˝

546 x 660 x 1854 546 x 660 x 1854

weight lbs. kg

sliding space in. mm

92 74

3˝ 5˝

41.7 33.6

pan/tray capacity 12˝ x 20˝ 18˝ x 26˝ 13˝ x 18˝ pan pan pan

76 127

19 11

20 12

LIFETIME Universal Roll-In Racks see spec sheet

EG60.33

LIFETIME GUARANTEE! against rust and corrosion, and against material defects and workmanship.

FEATURES:

40 24

14˝ x 18˝ tray model # 40 4339 24 4340

list 2640 2085

• For 12˝ x 20˝ (305 x 508mm) pans, 18˝ x 26˝ (457 x 660mm) pans, 13˝ x 18˝ (330 x 457mm) pans, or 14˝ x 18˝ (356 x 457mm) trays. • All heavy duty 6063-T5 alloy aluminum type construction. • Fully-welded frame features 11⁄2˝ x 13⁄4˝ (38 x 45mm) “D”-shaped tubing. • Crossbracing consists of 1˝ (25mm) square tubing. • 11⁄2˝ (38mm) square tube base includes 5˝ x 13⁄8˝ (127 x 35mm) non-marking recessed swivel plate casters. • 31⁄4˝ (86mm) wide aluminum angle slides are welded to frame. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

overall dimensions width x depth x height in. mm 211⁄2˝ x 26˝ x 64˝ 211⁄2˝ x 26˝ x 64˝

324

546 x 660 x 1626 546 x 660 x 1626

weight lbs. kg

sliding space in. mm

68 81

5˝ 3˝

30.8 36.7

127 76

pan/tray capacity 12˝ x 20˝ 18˝ x 26˝ 13˝ x 18˝ pan pan pan 10 17

11 18

22 36

14˝ x 18˝ tray model # 22 4337 36 4338

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

list 1940 2315


TRANSPORT SYSTEMS Catalog Section 60

LIFETIME Stepped-Angle Racks see spec sheet

EG60.34

SIZES OF APPLICABLE PANS & TRAYS: Roast/bake pans: Steamtable pans: Bun pans: Service trays: Maxi pan: Standard gastro-norm pans:

20˝ x 22˝, 18˝ x 26˝, 10˝ x 20˝ 12˝ x 18˝, 12˝ x 20˝ 18˝ x 13˝, 18˝ x 26˝ 15˝ x 20˝, 14˝ x 18˝ 203⁄4˝ x 251⁄2˝ 203⁄4˝ x 251⁄2˝

FEATURES:

LIFETIME GUARANTEE!

• Accepts popular sizes of roast & bake pans, steam table pans, service trays, and more. • Constructed of heavy duty extruded primary type 6463-T5 aluminum alloy. • Fully-welded frame features 11⁄2˝ x 13⁄4˝ (38 x 45mm) “D”-shaped tubing. • Crossbracing consists of 1˝ (25mm) square tubing. • 11⁄2˝ (38mm) square tube base includes 6˝ x 2˝ (152 x 51mm) non-marking swivel plate casters. • 63⁄16˝ (157mm) wide aluminum “stepped” angle slides are welded to uprights of frame. Freight class is 70.0.

against rust and corrosion, and against material defects and workmanship.

(•) MTS (made to stock) / ( ) MTO (made to order)

Roll-In Racks

Pan Racks overall dimensions slide overall width x depth spacing # of height in. mm in. mm slides in. mm 25˝ x 26˝ 25˝ x 26˝

635 x 660 635 x 660

41⁄2˝ 3˝

114 76

12 18

73˝ 73˝

1854 1854

overall height weight list in. mm lbs. kg model # 2848 64˝ 1626 91 41.3 4635 3600 64˝ 1626 114 51.7 4637

weight lbs. kg model # 92 41.7 4640 74 33.6 4642

LIFETIME Enclosed Pan Racks see spec sheet

EG60.35

LIFETIME GUARANTEE! against rust and corrosion, and against material defects and workmanship.

FEATURES:

list 2433 3071

• For 18˝ x 26˝ (457 x 660mm) pans or 13˝ x 18˝ (330 x 457mm) pans. • Constructed of heavy duty extruded type 6063-T5 aluminum alloy. • Fully welded construction includes top bracing, interior bracing, and bottom frame. • Side panels welded to uprights, top bracing, and bottom frame. • Heavy duty base includes 6˝ x 2˝ (152 x 51mm) non-marking swivel plate casters. • 31⁄4˝ (86mm) wide aluminum angle slides are welded to frame. Freight class is 70.0. (•) MTS (made to stock) / ( ) MTO (made to order)

overall dimensions width x depth x height in. mm 207⁄8˝ x 275⁄8˝ x 69˝ 207⁄8˝ x 275⁄8˝ x 69˝ 207⁄8˝ x 275⁄8˝ x 69˝

530 x 702 x 1753 530 x 702 x 1753 530 x 702 x 1753

weight lbs. kg

slide spacing in. mm

132 132 132

11⁄2˝ 11⁄2˝ 11⁄2˝

59.9 59.9 59.9

18˝ x 26˝ type of pan 6˝ (152mm) capacity caster

38 38 38

38 38 38

polyolefin K-urethane polyolefin

model # 1290PP * 1290WDW 1292

list 2725 3554 2744

* #1290PP “Prison Package” includes: (4) aluminum welded hinges; (4) 6˝ casters; (2) padlock holes in door; extra interior bracing; and tamper-proof screws and bolts.

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

325


Transport Holding Cabinets for Heated, Proofing, and Heated/Proofing See Pages 327 - 332.

Patented # 6,847,013 B2

full size unit with solid door

half size unit with Tuffak® door

full size unit with Tuffak® door

Digital Control System on all units!

• Easy-touch front control panel w/membrane switches. • Liquid Crystal Display (LCD) read-out.

• Digital setting of air temperature. • Overheat caution alarm. • Embedded LED technology. • Upgrade software control.

• Aluminum construction on exterior and interior. • Bottom mounted control panel and heating system removes easily for cleaning or servicing. • Adjustable digital temperature control system with LCD readout. • Ability to hold humidity levels up to four hours without refilling reservoir (proofing models). Adjustable humidity control. • 2000-Watt heating capacity with internal air temperature up to 200˚F. 1500-Watt is optional on 120V only. • High-temperature protection device with caution alarm and auto reset. • Full 270 degree open door swing via 3⁄16˝ (5mm) thick heavy duty aluminum hinges with stainless steel pin. • Positive closing magnetic door latch. • Full-size, half-size, and undercounter models available. • Units with narrow width and optional wide width feature 21⁄4˝ (57mm) increment slide spacing. Units with extended width feature 3˝ (76mm) increment slide spacing. See pages 327, 329, and 331 for further information about widths available for full-size, half-size, and undercounter models. • Standard removable slides. • Available in both insulated and non-insulated. • Insulated units feature identity color stripe on both sides. • 8´(2438mm) cord and plug provided. • Available in 120V, 208V, and 240V models. • Full perimeter bumper on all models. • Heavy duty polymer swivel casters, two with brake.

Maximum Pan Capacities of Transport Holding Cabinets Based on standard slide spacings of: 21⁄4˝ (57mm) for units with Narrow width or optional Wide width, and for all units with aluminum slides; and 3˝ (76mm) spacing for units with Extended width, and for all units with wire slides. For information about standard number of slides that come with units, see charts on pages 327 through 332. For information about additional and replacement slides available, see page 335.

…of Half-Size Units and Extended Undercounter Units* Cabinet Width Narrow Narrow Extended Extended Wide Wide

Slide 18˝ x 26˝ 13˝ x 18 12˝ x 20˝ x 2 ⁄2˝ Type sheet pans sheet pans food pans Wire Angle 8 16 n/a Wire Universal 8 16 4 Wire Angle n/a n/a 10 Wire Universal 5 10 10 Wire Angle 8 n/a n/a Wire Universal 8 n/a 4

* Narrow cabinet width does not apply to Undercounter Units.

1

WEIGHT CAPACITIES PER PAIR Wire Universal slides: 50 lbs. (22.7 kg) Wire slides: 80 lbs. (36.3 kg)

…of Full-Size Units Cabinet Width Narrow Narrow Extended Extended Wide Wide

Slide 18˝ x 26˝ 13˝ x 18 12˝ x 20˝ x 21⁄2˝ Type sheet pans sheet pans food pans Wire Angle 24 48 n/a Wire Universal 24 48 12 Wire Angle n/a n/a 36 Wire Universal 18 36 36 Wire Angle 24 n/a n/a Wire Universal 24 n/a 12


TRANSPORT SYSTEMS Catalog Section 60

Heated Cabinets For use in operations where hot food is to be stored or transported and held at hot food serving temperatures. 2000-watt heating capacity via two 1000-watt elements for heated air. • Aluminum construction on exterior and interior. • Bottom mounted control panel and heating system removes easily for cleaning or servicing. • Adjustable digital temperature control system with LCD read-out. • 2000-Watt heating capacity with internal air temperature up to 200˚F. 1500-Watt is optional on 120V only. • High-temperature protection device with caution alarm and auto reset. • Full 270 degree open door swing via 3⁄16˝ (5mm) thick heavy duty aluminum hinges with stainless steel pin. • Positive closing magnetic door latch. • Units with narrow width and optional wide width feature 21⁄4˝ (57mm) increment slide spacing. Units with extended width feature 3˝ (76mm) increment slide spacing. • Standard removable slides. • Available in both insulated and non-insulated. • Insulated units feature identity color stripe on both sides. • 8´(2438mm) cord and plug provided. • Available in 120V, 208V, and 240V models. • Full perimeter bumper on all models.

• Full-size units* feature the following: - 761⁄2˝ (1943mm) overall height. - 317⁄8˝ (810mm) “narrow” width. - Heavy duty 5˝ (127mm) polymer swivel casters, two with brake. - About 75 cubic feet.

• Half-size units* feature the following: - 391⁄8˝ (994mm) overall height. - 317⁄8˝ (810mm) “narrow” width. - Heavy duty 5˝ (127mm) polymer swivel casters, two with brake. - About 41 cubic feet.

• Extended Undercounter units** feature the following: - 301⁄2˝ (775mm) overall height. - 321⁄2˝ (826mm) “extended” width. - Heavy duty 3˝ (76mm) polymer swivel casters, two with brake. - About 35 cubic feet. * Optional 321⁄2˝ (826mm) “extended” width and 397⁄8˝ (1013mm) “wide” width available for full-size and half-size units. ** Extended undercounter units available only with “extended” width. 301⁄2˝ (775mm) overall height allows unit to fit underneath counters.

Full-Size Heated Cabinets see spec sheet EG60.25A Plug Configurations of Heated Cabinets

NEMA 5-20 for 120V 20A units

FEATURES:

• All model numbers that are included in the following charts reflect units with narrow width, removable slides with 21⁄4˝ (57mm) standard spacing, and 120-volt 20-amp electricity. Note:

See page 334 for other plug configurations available.

New York M.E.A. No. 245-02-E

Additional slides are required to obtain maximum pan capacity. See page 335 for further information about additional slides available. See page 326 for further information about maximum pan capacities.

ND WIDE- A-WIDTH ED EXTEND S ALSO UNIT ABLE! AVAIL

Units with Wire Slides

Dutch doors and pass-through doors available. See page 334.

Freight class is 100.0. (•) MTS (made to stock) / ( ) MTO (made to order)

12 pairs of slides. Max pan capacities: (24) 18˝ x 26˝ sheet pans, or (48) 13˝ x 18˝ sheet pans. weight NON-INSULATED lbs. kg quick-order # list solid single door 317⁄8˝ x 331⁄8˝ x 761⁄2˝ 810 x 841 x 1943 229 103.9 FSHC-A • 5536 Tuffak® single door 317⁄8˝ x 331⁄8˝ x 761⁄2˝ 810 x 841 x 1943 209 94.8 FSHC-B 6342

door style

width x depth x height in. mm

INSULATED quick-order # FSHC-C FSHC-D

1.572˝

list 7075 7882

Units with Wire Universal Slides 12 pairs of slides. Max pan capacities: (24) 18˝ x 26˝ sheet pans, (48) 13˝ x 18˝ sheet pans, or (12) 12˝ x 20˝ x 21⁄2˝ food pans. weight NON-INSULATED lbs. kg quick-order # list solid single door 317⁄8˝ x 331⁄8˝ x 761⁄2˝ 810 x 841 x 1943 229 103.9 FSHC-E 5711 Tuffak® single door 317⁄8˝ x 331⁄8˝ x 761⁄2˝ 810 x 841 x 1943 209 94.8 FSHC-F 6519

door style

width x depth x height in. mm

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

INSULATED quick-order # FSHC-G FSHC-H

list 7249 8058

3.385˝

327


TRANSPORT SYSTEMS Catalog Section 60

Half-Size Heated Cabinets see spec sheet EG60.25B Plug Configurations of Heated Cabinets

NEMA 5-20 for 120V 20A units

Note:

See page 334 for other plug configurations available

391⁄8˝ (994mm) High New York M.E.A. No. 245-02-E

with solid door

FEATURES:

• All model numbers that are included in the following charts reflect units with narrow width, removable slides with 21⁄4˝ (57mm) standard spacing, and 120-volt 20-amp electricity.

ND WIDE- A-WIDTH D E EXTEUNNDITS ALSO

On half-size units, maximum pan capacity is met without the need for additional slides. See page 335 for further information about replacement slides. See page 326 for further information about maximum pan capacities. Pass-through doors available. See page 334.

Freight class is 100.0.

!

LE AVAILAB

Units with Wire Slides

(•) MTS (made to stock) / ( ) MTO (made to order)

8 pairs of slides. Max pan capacities: (8) 18˝ x 26˝ sheet pans, or (16) 13˝ x 18˝ sheet pans. door style

width x depth x height in. mm

solid single door 317⁄8˝ x 331⁄8˝ x 391⁄8˝ Tuffak® single door 317⁄8˝ x 331⁄8˝ x 391⁄8˝

weight NON-INSULATED lbs. kg quick-order # list 810 x 841 x 994 155 70.3 HSHC-A 4972 810 x 841 x 994 171 77.6 HSHC-B 5731

INSULATED quick-order # HSHC-C HSHC-D

1.572˝

list 5778 6536

Units with Wire Universal Slides 8 pairs of slides. Max pan capacities: (8) 18˝ x 26˝ sheet pans, (16) 13˝ x 18˝ sheet pans, or (4) 12˝ x 20˝ x 21⁄2˝ food pans. door style

width x depth x height in. mm

solid single door 317⁄8˝ x 331⁄8˝ x 391⁄8˝ ® Tuffak single door 317⁄8˝ x 331⁄8˝ x 391⁄8˝

weight NON-INSULATED lbs. kg quick-order # list 810 x 841 x 994 155 70.3 HSHC-E 5061 810 x 841 x 994 171 77.6 HSHC-F 5820

Extended Undercounter Heated Cabinets see spec sheet EG60.25C Plug Configurations of Heated Cabinets

NEMA 5-20 for 120V 20A units

301⁄2˝ (775mm) High with Tuffak® door

See page 334 for other plug configurations available

FEATURES:

list 5869 6626

3.385˝

• All model numbers that are included in the following charts reflect units with extended width, removable slides with 3˝ (76mm) standard spacing, and 120-volt 20-amp electricity. Note:

IDE- AND

W TH ED-WID EXTEUNNDITS ALSO

New York M.E.A. No. 245-02-E

INSULATED quick-order # HSHC-G HSHC-H

LE! AVAILAB

On undercounter units, maximum pan capacity is met without the need for additional slides. See page 335 for further information about replacement slides. See page 326 for further information about maximum pan capacities. Pass-through doors available. See page 334.

Freight class is 100.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Units with Wire Slides 5 pairs of slides. Max pan capacities: (10) 12˝ x 20˝ x 2 ⁄2˝ food pans. 1

door style

width x depth x height in. mm

solid single door 321⁄2˝ x 351⁄4˝ x 301⁄2˝ ® Tuffak single door 321⁄2˝ x 351⁄4˝ x 301⁄2˝

weight NON-INSULATED lbs. kg quick-order # list 826 x 895 x 775 155 70.3 EUHC-A 5523 826 x 895 x 775 171 77.6 EUHC-B 6280

INSULATED quick-order # EUHC-C EUHC-D

0.75˝

list 6329 7088

Units with Wire Universal Slides 5 pairs of slides. Max pan capacities: (5) 18˝ x 26˝ sheet pans, (10) 13˝ x 18˝ sheet pans, or (10) 12˝ x 20˝ x 21⁄2˝ food pans. door style

width x depth x height in. mm

solid single door 321⁄2˝ x 351⁄4˝ x 301⁄2˝ Tuffak® single door 321⁄2˝ x 351⁄4˝ x 301⁄2˝

328

weight NON-INSULATED lbs. kg quick-order # list 826 x 895 x 775 155 70.3 EUHC-E 5614 826 x 895 x 775 171 77.6 EUHC-F 6372

INSULATED quick-order # EUHC-G EUHC-H

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

4.322˝

list 6419 7178


TRANSPORT SYSTEMS Catalog Section 60

Proofing Cabinets Provides humidity and heat needed for yeast products (breads, rolls, etc.) to rise. 2000-watt heating capacity via two elements: one 1000-watt element for heated air, and one 1000-watt element for humidity control. • Aluminum construction on exterior and interior. • Bottom mounted control panel and heating system removes easily for cleaning or servicing. • Adjustable digital temperature control system with LCD read-out. • Ability to hold humidity levels up to four hours without refilling reservoir. Adjustable humidity control. • 2000-Watt heating capacity with internal air temperature up to 200˚F. 1500-Watt is optional on 120V only. • High-temperature protection device with caution alarm and auto reset. • Full 270 degree open door swing via 3⁄16˝ (5mm) thick heavy duty aluminum hinges with stainless steel pin. • Positive closing magnetic door latch. • Units with “narrow” width and optional “wide” width feature 21⁄4˝ (57mm) increment slide spacing. Units with “extended” width feature 3˝ (76mm) increment slide spacing. • Standard removable slides. • Available in both insulated and non-insulated. • Insulated units feature identity color stripe on both sides. • 8´(2438mm) cord and plug provided. • Available in 120V, 208V, and 240V models. • Full perimeter bumper on all models.

• Full-size units* feature the following: - 761⁄2˝ (1943mm) overall height. - 317⁄8˝ (810mm) “narrow” width. - Heavy duty 5˝ (127mm) polymer swivel casters, two with brake. - About 75 cubic feet.

• Half-size units* feature the following: - 391⁄8˝ (994mm) overall height. - 317⁄8˝ (810mm) “narrow” width. - Heavy duty 5˝ (127mm) polymer swivel casters, two with brake. - About 41 cubic feet.

• Extended undercounter units** feature the following: - 301⁄2˝ (775mm) overall height. - 321⁄2˝ (826mm) “extended” width. - Heavy duty 3˝ (76mm) polymer swivel casters, two with brake. - About 35 cubic feet. * Optional 321⁄2˝ (826mm) “extended” width and 397⁄8˝ (1013mm) “wide” width available for full-size and half-size units. ** Extended undercounter units available only with “extended” width. 301⁄2˝ (775mm) overall height allows unit to fit underneath counters.

Full-Size Proofing Cabinets see spec sheet EG60.26A Plug Configurations of Proofing Cabinets

NEMA 5-20 for 120V 20A units

See page 334 for other plug configurations available

New York M.E.A. No. 245-02-E

FEATURES:

• All model numbers that are included in the following charts reflect units with narrow width, removable slides with 21⁄4˝ (57mm) standard spacing, and 120-volt 20-amp electricity. Note:

Additional slides are required to obtain maximum pan capacity. See page 335 for further information about additional slides available. See page 326 for further information about maximum pan capacities.

ND WIDE- A-WIDTH D E EXTEUNNDITS ALSO

Dutch doors and pass-through doors available. See page 334.

!

LE AVAILAB

with Tuffak® door

Freight class is 100.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Units with Wire Slides

12 pairs of slides. Max pan capacities: (24) 18˝ x 26˝ sheet pans, or (48) 13˝ x 18˝ sheet pans. door style

width x depth x height in. mm

solid single door 317⁄8˝ x 331⁄8˝ x 761⁄2˝810 x 841 x 1943 ® Tuffak single door 317⁄8˝ x 331⁄8˝ x 761⁄2˝810 x 841 x 1943

weight NON-INSULATED lbs. kg quick-order # list 229 103.9 FSPC-A • 5569 209 94.8 FSPC-B 6377

INSULATED quick-order # FSPC-C FSPC-D

1.572˝

list 7108 7958

Units with Wire Universal Slides 12 pairs of slides. Max pan capacities: (24) 18˝ x 26˝ sheet pans, (48) 13˝ x 18˝ sheet pans, or (12) 12˝ x 20˝ x 21⁄2˝ food pans. width x depth x height in. mm

weight NON-INSULATED door style lbs. kg quick-order # list solid single door 317⁄8˝ x 331⁄8˝ x 761⁄2˝ 810 x 841 x 1943 229 103.9 FSPC-E 5746 Tuffak® single door 317⁄8˝ x 331⁄8˝ x 761⁄2˝ 810 x 841 x 1943 209 94.8 FSPC-F 6553 100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

INSULATED quick-order # FSPC-G FSPC-H

3.385˝

list 7285 8133

329


TRANSPORT SYSTEMS Catalog Section 60

Half-Size Proofing Cabinets see spec sheet EG60.26B FEATURES:

Plug Configurations of Proofing Cabinets

NEMA 5-20 for 120V 20A units

Note:

See page 334 for other plug configurations available

391⁄8˝ (994mm) High New York M.E.A. No. 245-02-E

with Tuffak® door

• All model numbers that are included in the following charts reflect units with narrow width, removable slides with 21⁄4˝ (57mm) standard spacing, and 120-volt 20-amp electricity.

ND WIDE- A-WIDTH ED EXTEUNNDITS ALSO

On half-size units, maximum pan capacity is met without the need for additional slides. See page 335 for further information about replacement slides. See page 326 for further information about maximum pan capacities. Pass-through doors available. See page 334.

!

LE AVAILAB

Freight class is 100.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Units with Wire Slides

8 pairs of slides. Max pan capacities: (8) 18˝ x 26˝ sheet pans, or (16) 13˝ x 18˝ sheet pans. door style

width x depth x height in. mm

solid single door 317⁄8˝ x 331⁄8˝ x 391⁄8˝ Tuffak® single door 317⁄8˝ x 331⁄8˝ x 391⁄8˝

weight NON-INSULATED lbs. kg quick-order # list 810 x 841 x 994 155 70.3 HSPC-A 5019 810 x 841 x 994 171 77.6 HSPC-B 5778

INSULATED quick-order # HSPC-C HSPC-D

1.572˝

list 5827 6584

Units with Wire Universal Slides 8 pairs of slides. Max pan capacities: (8) 18˝ x 26˝ sheet pans, (16) 13˝ x 18˝ sheet pans, or (4) 12˝ x 20˝ x 21⁄2˝ food pans. door style

width x depth x height in. mm

solid single door 317⁄8˝ x 331⁄8˝ x 391⁄8˝ ® Tuffak single door 317⁄8˝ x 331⁄8˝ x 391⁄8˝

weight NON-INSULATED lbs. kg quick-order # list 810 x 841 x 994 155 70.3 HSPC-E 5111 810 x 841 x 994 171 77.6 HSPC-F 5869

Extended Undercounter Proofing Cabinets see spec sheet EG60.26C FEATURES:

Plug Configurations of Proofing Cabinets

NEMA 5-20 for 120V 20A units

301⁄2˝ (775mm) High with Tuffak® door

Units with Wire Slides

Note:

ND WIDE- A-WIDTH ED EXTEND ALSO UNITS ABLE! AVAIL

5 pairs of slides. Max pan capacities: (10) 12˝ x 20˝ x 21⁄2˝ food pans. door style

width x depth x height in. mm

solid single door 321⁄2˝ x 351⁄4˝ x 301⁄2˝ ® Tuffak single door 321⁄2˝ x 351⁄4˝ x 301⁄2˝

3.385˝

list 5916 6674

• All model numbers that are included in the following charts reflect units with extended width, removable slides with 3˝ (76mm) standard spacing, and 120-volt 20-amp electricity.

See page 334 for other plug configurations available

New York M.E.A. No. 245-02-E

INSULATED quick-order # HSPC-G HSPC-H

weight NON-INSULATED lbs. kg quick-order # list 826 x 895 x 775 155 70.3 EUPC-A 5572 826 x 895 x 775 171 77.6 EUPC-B 6329

On undercounter units, maximum pan capacity is met without the need for additional slides. See page 335 for further information about replacement slides. See page 326 for further information about maximum pan capacities. Pass-through doors available. See page 334.

Freight class is 100.0. (•) MTS (made to stock) / ( ) MTO (made to order)

INSULATED quick-order # EUPC-C EUPC-D

0.75˝

list 6379 7136

Units with Wire Universal Slides 5 pairs of slides. Max pan capacities: (5) 18˝ x 26˝ sheet pans, (10) 13˝ x 18˝ sheet pans, or (10) 12˝ x 20˝ x 21⁄2˝ food pans. door style

width x depth x height in. mm

solid single door 321⁄2˝ x 351⁄4˝ x 301⁄2˝ Tuffak® single door 321⁄2˝ x 351⁄4˝ x 301⁄2˝

330

weight NON-INSULATED lbs. kg quick-order # list 826 x 895 x 775 155 70.3 EUPC-E 5731 826 x 895 x 775 171 77.6 EUPC-F 6487

INSULATED quick-order # EUPC-G EUPC-H

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

4.322˝

list 6536 7296


TRANSPORT SYSTEMS Catalog Section 60

Heated/Proofing Cabinets For use in operations where hot food is to be stored or transported and held at hot food serving temperatures. 2000-watt heating capacity. “Heating mode” uses two 1000-watt elements for heated air. “Proofing Mode” uses one 1000-watt element for heated air, and one 1000-watt element for humidity control. • Aluminum construction on exterior and interior. • Bottom mounted control panel and heating system removes easily for cleaning or servicing. • Adjustable digital temperature control system with LCD read-out. • 2000-Watt heating capacity with internal air temperature up to 200˚F. 1500-Watt is optional on 120V only. • Ability to hold humidity levels up to 4 hours without refilling reservoir. Adjustable humidity control. • High-temperature protection device with caution alarm and auto reset. • Full 270 degree open door swing via 3⁄16˝ (5mm) thick heavy duty aluminum hinges with stainless steel pin. • Positive closing magnetic door latch. • Units with “narrow” width and optional “wide” width feature 21⁄4˝ (57mm) increment slide spacing. Units with “extended” width feature 3˝ (76mm) increment slide spacing. • Standard removable slides. • Available in both insulated and non-insulated. • Insulated units feature identity color stripe on both sides. • 8´(2438mm) cord and plug provided. • Available in 120V, 208V, and 240V models. • Full perimeter bumper on all models.

• Full-size units* feature the following: - 761⁄2˝ (1943mm) overall height. - 317⁄8˝ (810mm) “narrow” width. - Heavy duty 5˝ (127mm) polymer swivel casters, two with brake. - About 75 cubic feet.

• Half-size units* feature the following: - 391⁄8˝ (994mm) overall height. - 317⁄8˝ (810mm) “narrow” width. - Heavy duty 5˝ (127mm) polymer swivel casters, two with brake. - About 41 cubic feet.

• Extended Undercounter units** feature the following: - 301⁄2˝ (775mm) overall height. - 321⁄2˝ (826mm) “extended” width. - Heavy duty 3˝ (76mm) polymer swivel casters, two with brake. - About 35 cubic feet. * Optional 321⁄2˝ (826mm) “extended” width and 397⁄8˝ (1013mm) “wide” width available for full-size and half-size units. ** Extended undercounter units available only with “extended” width. 301⁄2˝ (775mm) overall height allows unit to fit underneath counters.

Full-Size Heated/Proofing Cabinets see spec sheet EG60.27A Plug Configurations of Heated/Proofing Cabinets

NEMA 5-20 for 120V 20A units

FEATURES:

• All model numbers that are included in the following charts reflect units with narrow width, removable slides with 21⁄4˝ (57mm) standard spacing, and 120-volt 20-amp electricity. Note:

See page 334 for other plug configurations available

New York M.E.A. No. 245-02-E

with solid door

Additional slides are required to obtain maximum pan capacity. See page 335 for further information about additional slides available. See page 326 for further information about maximum pan capacities.

ND WIDE- A-WIDTH ED EXTEND ALSO

Dutch doors and pass-through doors available. See page 334.

UNITS ABLE! AVAIL

Freight class is 100.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Units with Wire Slides

12 pairs of slides. Max pan capacities: (24) 18˝ x 26˝ sheet pans, or (48) 13˝ x 18˝ sheet pans. width x depth x height in. mm

weight NON-INSULATED door style lbs. kg quick-order # list solid single door 317⁄8˝ x 331⁄8˝ x 761⁄2˝ 810 x 841 x 1943 229 103.9 FSHPC-A • 5595 Tuffak® single door 317⁄8˝ x 331⁄8˝ x 761⁄2˝ 810 x 841 x 1943 209 94.8 FSHPC-B • 6401

INSULATED quick-order # FSHPC-C FSHPC-D

1.572˝

list 7134 7940

Units with Wire Universal Slides 12 pairs of slides. Max pan capacities: (24) 18˝ x 26˝ sheet pans, (48) 13˝ x 18˝ sheet pans, or (12) 12˝ x 20˝ x 21⁄2˝ food pans. door style

width x depth x height in. mm

solid single door 317⁄8˝ x 331⁄8˝ x 761⁄2˝810 x 841 x 1943 ® Tuffak single door 317⁄8˝ x 331⁄8˝ x 761⁄2˝810 x 841 x 1943

weight NON-INSULATED lbs. kg quick-order # list 229 103.9 FSHPC-E 5771 209 94.8 FSHPC-F 6578

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

INSULATED quick-order # FSHPC-G FSHPC-H

3.385˝

list 7311 8118

331


TRANSPORT SYSTEMS Catalog Section 60

Half-Size Heated/Proofing Cabinets see spec sheet EG60.27B FEATURES:

Plug Configurations of Heated/Proofing Cabinets

391⁄8˝ (994mm) High

NEMA 5-20 for 120V 20A units

with Tuffak door ®

Note:

See page 334 for other plug configurations available

New York M.E.A. No. 245-02-E

• All model numbers that are included in the following charts reflect units with narrow width, removable slides with 21⁄4˝ (57mm) standard spacing, and 120-volt 20-amp electricity.

IDE- AND

W TH ED-WID EXTEUNNDITS ALSO

On half-size units, maximum pan capacity is met without the need for additional slides. See page 335 for further information about replacement slides. See page 326 for further information about maximum pan capacities. Pass-through doors available. See page 334.

Freight class is 100.0.

!

LE AVAILAB

(•) MTS (made to stock) / ( ) MTO (made to order)

Units with Wire Slides

8 pairs of slides. Max pan capacities: (8) 18˝ x 26˝ sheet pans, or (16) 13˝ x 18˝ sheet pans. width x depth x height in. mm

door style

solid single door 317⁄8˝ x 331⁄8˝ x 391⁄8˝ Tuffak® single door 317⁄8˝ x 331⁄8˝ x 391⁄8˝

weight NON-INSULATED lbs. kg quick-order # list 810 x 841 x 994 155 70.3 HSHPC-A • 5071 810 x 841 x 994 171 77.6 HSHPC-B 5828

INSULATED quick-order # HSHPC-C HSHPC-D

1.572˝

list 5876 6635

Units with Wire Universal Slides 8 pairs of slides. Max pan capacities: (8) 18˝ x 26˝ sheet pans, (16) 13˝ x 18˝ sheet pans, or (4) 12˝ x 20˝ x 21⁄2˝ food pans. width x depth x height in. mm

door style

solid single door 317⁄8˝ x 331⁄8˝ x 391⁄8˝ ® Tuffak single door 317⁄8˝ x 331⁄8˝ x 391⁄8˝

weight NON-INSULATED lbs. kg quick-order # list 810 x 841 x 994 155 70.3 HSHPC-E 5161 810 x 841 x 994 171 77.6 HSHPC-F 5918

Extended Undercounter Heated/Proofing Cabinets see spec sheet EG60.27C Plug Configurations of Heated/Proofing Cabinets

NEMA 5-20 for 120V 20A units

301⁄2˝ (775mm) High with Tuffak door ®

FEATURES:

Units with Wire Slides

Note:

ND WIDE- A-WIDTH ED EXTENNDITS ALSO U LE! AVAILAB

5 pairs of slides. Max pan capacities: (10) 12˝ x 20˝ x 21⁄2˝ food pans. door style

width x depth x height in. mm

solid single door 321⁄2˝ x 351⁄4˝ x 301⁄2˝ ® Tuffak single door 321⁄2˝ x 351⁄4˝ x 301⁄2˝

826 x 895 x 775 826 x 895 x 775

3.385˝

list 5965 6723

• All model numbers that are included in the following charts reflect units with extended width, removable slides with 3˝ (76mm) standard spacing, and 120-volt 20-amp electricity.

See page 334 for other plug configurations available

New York M.E.A. No. 245-02-E

INSULATED quick-order # HSHPC-G HSHPC-H

weight NON-INSULATED lbs. kg quick-order # list 155 70.3 EUHPC-A 5621 171 77.6 EUHPC-B 6380

On undercounter units, maximum pan capacity is met without the need for additional slides. See page 335 for further information about replacement slides. See page 326 for further information about maximum pan capacities. Pass-through doors available. See page 334.

Freight class is 100.0. (•) MTS (made to stock) / ( ) MTO (made to order)

INSULATED quick-order # EUHPC-C EUHPC-D

0.75˝

list 6427 7185

Units with Wire Universal Slides 5 pairs of slides. Max pan capacities: (5) 18˝ x 26˝ sheet pans, (10) 13˝ x 18˝ sheet pans, or (10) 12˝ x 20˝ x 21⁄2˝ food pans. door style

width x depth x height in. mm

solid single door 321⁄2˝ x 351⁄4˝ x 301⁄2˝ Tuffak® single door 321⁄2˝ x 351⁄4˝ x 301⁄2˝

332

weight NON-INSULATED lbs. kg quick-order # list 826 x 895 x 775 155 70.3 EUHPC-E 5711 826 x 895 x 775 171 77.6 EUHPC-F 6469

INSULATED quick-order # EUHPC-G EUHPC-H

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

4.322˝

list 6518 7275


TRANSPORT SYSTEMS Catalog Section 60

Transport Holding Cabinets for Heated, Proofing, and Heated/Proofing To order cabinet with options & accessories, the cabinet “quick-order” numbers (seen on pages 327-332) must be translated. The new model number can then be altered to reflect any factory-installed optional features desired. Please refer to the appropriate chart below for translation, then go to page 334.

To translate “quick-order” numbers: see spec sheet EG60.28

Heating Cabinets

Proofing Cabinets

Heated/Proofing Cabinets

(pages 327-328)

(pages 329-330)

(pages 331-332)

quick-order #

translation for ordering options/accessories

quick-order #

translation for ordering options/accessories

quick-order #

translation for ordering options/accessories

Full-Size (page 327)

Full-Size (page 329)

Full-Size (page 331)

FSHC-A . . . . . . . . . HCFNSSN-RA2.25-120 FSHC-B . . . . . . . . . HCFNLSN-RA2.25-120 FSHC-C . . . . . . . . . HCFNSSI-RA2.25-120 FSHC-D. . . . . . . . . HCFNLSI-RA2.25-120 FSHC-E . . . . . . . . . HCFNSSN-RC2.25-120 FSHC-F . . . . . . . . . HCFNLSN-RC2.25-120 FSHC-G. . . . . . . . . HCFNSSI-RC2.25-120 FSHC-H. . . . . . . . . HCFNLSI-RC2.25-120

FSPC-A . . . . . . . . . PCFNSSN-RA2.25-120 FSPC-B . . . . . . . . . PCFNLSN-RA2.25-120 FSPC-C . . . . . . . . . PCFNSSI-RA2.25-120 FSPC-D. . . . . . . . . PCFNLSI-RA2.25-120 FSPC-E . . . . . . . . . PCFNSSN-RC2.25-120 FSPC-F . . . . . . . . . PCFNLSN-RC2.25-120 FSPC-G. . . . . . . . . PCFNSSI-RC2.25-120 FSPC-H. . . . . . . . . PCFNLSI-RC2.25-120

FSHPC-A . . . . . . . . HPFNSSN-RA2.25-120 FSHPC-B . . . . . . . . HPFNLSN-RA2.25-120 FSHPC-C . . . . . . . . HPFNSSI-RA2.25-120 FSHPC-D . . . . . . . . HPFNLSI-RA2.25-120 FSHPC-E . . . . . . . . HPFNSSN-RC2.25-120 FSHPC-F . . . . . . . . HPFNLSN-RC2.25-120 FSHPC-G . . . . . . . . HPFNSSI-RC2.25-120 FSHPC-H . . . . . . . . HPFNLSI-RC2.25-120

Half-Size (page 328)

Half-Size (page 330)

Half-Size (page 332)

HSHC-A. . . . . . . . . HCHNSSN-RA2.25-120 HSHC-B. . . . . . . . . HCHNLSN-RA2.25-120 HSHC-C. . . . . . . . . HCHNSSI-RA2.25-120 HSHC-D . . . . . . . . HCHNLSI-RA2.25-120 HSHC-E. . . . . . . . . HCHNSSN-RC2.25-120 HSHC-F. . . . . . . . . HCHNLSN-RC2.25-120 HSHC-G . . . . . . . . HCHNSSI-RC2.25-120 HSHC-H . . . . . . . . HCHNLSI-RC2.25-120

HSPC-A. . . . . . . . . PCHNSSN-RA2.25-120 HSPC-B. . . . . . . . . PCHNLSN-RA2.25-120 HSPC-C. . . . . . . . . PCHNSSI-RA2.25-120 HSPC-D . . . . . . . . PCHNLSI-RA2.25-120 HSPC-E. . . . . . . . . PCHNSSN-RC2.25-120 HSPC-F. . . . . . . . . PCHNLSN-RC2.25-120 HSPC-G . . . . . . . . PCHNSSI-RC2.25-120 HSPC-H . . . . . . . . PCHNLSI-RC2.25-120

HSHPC-A. . . . . . . . HPHNSSN-RA2.25-120 HSHPC-B. . . . . . . . HPHNLSN-RA2.25-120 HSHPC-C. . . . . . . . HPHNSSI-RA2.25-120 HSHPC-D. . . . . . . . HPHNLSI-RA2.25-120 HSHPC-E . . . . . . . . HPHNSSN-RC2.25-120 HSHPC-F . . . . . . . . HPHNLSN-RC2.25-120 HSHPC-G. . . . . . . . HPHNSSI-RC2.25-120 HSHPC-H. . . . . . . . HPHNLSI-RC2.25-120

Undercounter (page 328)

Undercounter (page 330)

Undercounter (page 332)

EUHC-A. . . . . . . . . HCUESSN-RA3.00-120 EUHC-B. . . . . . . . . HCUELSN-RA3.00-120 EUHC-C. . . . . . . . . HCUESSI-RA3.00-120 EUHC-D. . . . . . . . . HCUELSI-RA3.00-120 EUHC-E . . . . . . . . . HCUESSN-RC3.00-120 EUHC-F . . . . . . . . . HCUELSN-RC3.00-120 EUHC-G. . . . . . . . . HCUESSI-RC3.00-120 EUHC-H. . . . . . . . . HCUELSI-RC3.00-120

EUPC-A. . . . . . . . . PCUESSN-RA3.00-120 EUPC-B. . . . . . . . . PCUELSN-RA3.00-120 EUPC-C. . . . . . . . . PCUESSI-RA3.00-120 EUPC-D. . . . . . . . . PCUELSI-RA3.00-120 EUPC-E . . . . . . . . . PCUESSN-RC3.00-120 EUPC-F . . . . . . . . . PCUELSN-RC3.00-120 EUPC-G. . . . . . . . . PCUESSI-RC3.00-120 EUPC-H. . . . . . . . . PCUELSI-RC3.00-120

EUHPC-A . . . . . . . . HPUESSN-RA3.00-120 EUHPC-B . . . . . . . . HPUELSN-RA3.00-120 EUHPC-C . . . . . . . . HPUESSI-RA3.00-120 EUHPC-D. . . . . . . . HPUELSI-RA3.00-120 EUHPC-E . . . . . . . . HPUESSN-RC3.00-120 EUHPC-F . . . . . . . . HPUELSN-RC3.00-120 EUHPC-G. . . . . . . . HPUESSI-RC3.00-120 EUHPC-H. . . . . . . . HPUELSI-RC3.00-120

After translating, go to page 334 to order cabinet with options & accessories

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

333


TRANSPORT SYSTEMS Catalog Section 60

To order Transport Holding Cabinets with options/accessories: see spec sheet EG60.28

1) Build a model number, based on the chart on page 333. The following chart lists the design elements available. Each chart column contains two or more choices of each design element (examples: half or full size, etc.). To spell out a model number, choose the designated letters and numbers in the chart below from left to right. Example: #HCFWSDI-RA2.25-240 indicates a full size Heating Cabinet (HCF), wide width (W), with solid (S) dutch door (D), insulated (I-), wire slides (RA), 2.25˝ slide spacing (2.25-), and 240-volt 15-amp electricity (240). Note: Standard design elements are indicated in bold text in the chart below. Full, Half, Undercounter/ Cabinet Door Door Slide Slide Type of Holding Cabinet Width* Style Type Insulation**** Type Spacing** Full Heating = HCF Narrow = N** Solid = S Standard Single Door = S None = NWire = RA 2.25˝ = 2.25Half Heating = HCH Extended = E** Tuffak® = L Dutch Doors = D*** Insulated = I- Wire Universal = RC Custom = (other #)Undercounter Heating = HCU* Wide = W** Pass-through Single Door = P Full Proofing = PCF Pass-through Dutch Doors = PD*** Half Proofing = PCH Undercounter Proofing = PCU* Full Heating/Proofing = HPF Half Heating/Proofing = HPH Undercounter H/P = HPU*

Voltage Type 120V 20amp = 120 120V 15amp = 120A 208V 15amp = 208 240V 15amp = 240

* Undercounter units available with Extended-width only. ** 21⁄4˝ (57mm) standard slide spacing for Narrow- and Wide-width units, and for units with wire universal slides (3˝ for Extended-width units). If a different spacing is required, please indicate desired slide spacing in inches. *** Available only on Full-Size units. **** Wide-width units available insulated only.

2) Establish a list price. The following chart lists the pricing for each design element choice seen in the first chart. To establish a total list price, add the price indicated for each chosen design element of the model number spelled out in Step 1. Example: #HCFWSDI-RA2.25-240 is a full size Heating Cabinet at $5536, with wide width at $204, dutch doors at $1528, insulation (for full size unit) at $1462, and 240-volt 15-amp electricity at $204. Each of the other design elements in this model is $0. Therefore, total list price is $8934. Note: Standard design elements are indicated in bold text in the chart below. Full, Half, Undercounter/ Cabinet Type of Holding Cabinet Width Full Heating = $5536 Narrow = $0 Half Heating = $4972 Extended = $524 Undercounter Heating = $5523 Wide = $204 Full Proofing = $5569 Half Proofing = $5019 Undercounter Proofing = $5293 Full Heating/Proofing = $5595 Half Heating/Proofing = $5071 Undercounter H/P= $5621

Door Style Solid = $0 Tuffak® - for Full-Size = $766 - for Half-Size = $720 - for U/C = $720

Door Type Standard Single Door = $0 Dutch Doors = $1528 Pass-through Single Door - for Full-Size = $1789 - for Half-Size = $1524 - for Undercounter = $1524 Pass-through Dutch Door = $4584

Insulation No insulation = $0 With insulation - for Full-Size = $1462 - for Half-Size = $766 - for Undercounter = $766

Slide Slide Type Spacing Wire = $0 2.25˝ = $0 Wire Universal Custom = $204 - for Full-Size = $168 - for Half-Size = $86 - for Undercounter = $86

Plug Configurations of optional voltage types:

NEMA 5-15 for 120V 15A units

334

NEMA 5-20 for 120V 20A units

NEMA 6-15 for 208V 15A and 240V 15A units

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

Voltage Type 120V 20A = $0 120V 15A = $204 208V 15A = $204 240V 15A = $204


TRANSPORT SYSTEMS Catalog Section 60

Additional/Replacement Slides for Transport Holding Cabinets see spec sheet EG60.28

Wire and Wire Universal Slides… • • • •

8 pairs of slides come with half-size units with narrow and wide width. 5 pairs of slides come with undercounter units and half-size units with extended width. On undercounter and half-size units, maximum pan capacity is met without additional slides required. 12 pairs of slides come with full-size units. On full-size units, additional slides are required to obtain maximum pan capacity. Priced individually.

…for Narrow-Width Units …for Extended-Width Units …for Wide-Width Units description of slides Wire Slides (“RA” in translated #) Wire Universal Slides (“RC” in translated #)

model # 357068 357074 357080 357071 357077 357083

list price each 25 n/a n/a 29 n/a n/a

list price each n/a 25 n/a n/a 29 n/a

Cook & Hold Cabinets see product announcement

EG60.11

FEATURES:

half-height unit full-height unit

list price each 25 n/a 25 n/a n/a 29

• Absolute precise control over temperature and humidity with 8˚ variance anywhere within cabinet. • Humidity is controlled via solenoid plumbed directly to water supply. • Even convection heating through engineered airflow design. • Triple wall insulated cabinet body for better heat retention. • 18 gauge type 300 stainless steel interior and exterior walls. • Easily-reversible doors swing 180˚, and include positive closing latch. • Four input buttons: Enter, Recall, and Up/Down selection buttons. • Standard top-mounted digital control panel includes 2˝ x 16˝ (51 x 406mm) character LCD readout; digital setting of temperatures; memory for 16 programs; embedded LEDs for

Freight class is 100.0. (•) MTS (made to stock) / ( ) MTO (made to order)

Full-Height Unit Features three 2000W heating elements. width* x depth* x height in. mm 271⁄2˝ x 327⁄8˝ x 771⁄8˝ 271⁄2˝ x 327⁄8˝ x 771⁄8˝ 271⁄2˝ x 321⁄2˝ x 741⁄8˝ 271⁄2˝ x 321⁄2˝ x 741⁄8˝

699 x 835 x 1959 699 x 835 x 1959 699 x 826 x 1883 699 x 826 x 1883

weight lbs. kg 462 462 462 462

210 210 210 210

cubic feet

total voltage wattage

36.6 36.6 36.6 36.6

240 208 240 208

6000 6000 6000 6000

number of slides model # 18 CH6000D-240 18 CH6000D-208 18 CH6000B-240 18 CH6000B-208

list 20792 20792 20792 20792

Half-Height Unit 461⁄2˝ (1181mm) height. Features three 1000W elements. width* x depth* x height in. mm 27 ⁄2˝ x 32 ⁄2˝ x 46 ⁄2˝ 271⁄2˝ x 321⁄2˝ x 461⁄2˝ 1

1

1

Power, Preheat, Temperature Probe, Cook, and Hold; and overheat/power outage caution alarms. Easy-touch with membrane switches. • Automatically changes from cooking to holding when time/temperature parameters have been met. • Cooks by time or temperature probe. • Cook/probe temperature: 100-350˚F. • Holding temperature: 145-200˚F. • Convertible from Fahrenheit to Celsius. • Cook/hold time up to 24 hours. • Heavy duty 5˝ (127mm) polymer swivel casters, two with brake. • Full perimeter bumper. • Chrome wire tray slides.

weight lbs. kg

699 x 826 x 1181 327 699 x 826 x 1181 327

148 148

cubic feet 22.6 22.6

total voltage wattage 240 208

3000 3000

number of slides model # list 9 CH3000B-240 14420 9 CH3000B-208 14420

DOOR CODE (IN MODEL #S): “B” indicates solid door “D” indicates dutch door

Water Filter Kit model # 369370

list 412

Replacement Filter for Water Filter Kit model # 369371

list 283

* width and depth include perimeter bumper. 100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

335


NOTES ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________

336

____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________ ____________________________________

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


Custom Options / Accessories for Tables, Sinks and Dishtables . . . . . . . . . . . . . . . . . . . . . . . . . . . 338-339 for Underbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340 for Ventilation Hoods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340 #303365 E62 E69 E70 E77

double speed rail

E73

E67 #303365 E64

E80

#303365 E79

#300713 & 300819 E66

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

337


CUSTOM OPTIONS / ACCESSORIES For Tables, Sinks, and Dishtables Please note: Suffixes are typically indicated by the dash (“-”) preceding numbers and/or letters. model # or suffix

description

unit

list

TABLE EDGES: E10 . . . . . . . . . Square edge table . . . . . . . . . . . . . . . . . . . . . . . . . . PER TABLE . . . . 195 E11. . . . . . . . . . Counter type marine edge . . . . . . . . . . . . . . . . . . . . PER TABLE . . . . 421 E12 . . . . . . . . . “V” type marine edge . . . . . . . . . . . . . . . . . . . . . . . . PER TABLE . . . . 421 E13 . . . . . . . . . Bullnose edge. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PER TABLE . . . . 400 E13A . . . . . . . . Inverted roll edge (flour gutter), up to 96˝ long . . . . PER TABLE . . . . 400 E10A . . . . . . . . tray lock–rear edge turned up, then forward . . . . . . PER TABLE . . . . 199 TABLE SPLASH MODIFICATIONS AND OPTIONS: -6BS. . . . . . . . . 6˝ backsplash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LIN. FT. . . . . . . 23 -8BS. . . . . . . . . 8˝ backsplash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LIN. FT. . . . . . . 35 -10BS. . . . . . . . 10˝ backsplash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LIN. FT. . . . . . . 41 -12BS. . . . . . . . 12˝ backsplash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LIN. FT. . . . . . . 52 -18BS. . . . . . . . 18˝ backsplash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LIN. FT. . . . . . . 68 -PBS . . . . . . . . Partial backsplash . . . . . . . . . . . . . . . . . . . . . . . . . . . . LIN. FT. . . . . . . 23 -UE. . . . . . . . . . 1-1/2˝ upturn end . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . . . 86 E30 . . . . . . . . . End splash, all heights. . . . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . . 287 E33 . . . . . . . . . Sink splash, single thickness, 4˝ high . . . . . . . . . . . . . . . EA . . . . . . . 297 E39 . . . . . . . . . Enclosed backsplash . . . . . . . . . . . . . . . . . . . . . . . . . . LIN. FT. . . . . . . 78 E57 . . . . . . . . . Backsplash capping strip, for two tables back-to-back LIN. FT. . . . . . . 41 CORNER GUARD-A . . . . Corner guard, angle type, 2˝ x 2˝ x 48˝ high, stainless . . EA. . . . . . . . 115 CORNER GUARD-C . . . . Corner guard, channel type, 2˝ x 8˝ x 48˝ high, stainless EA . . . . . . . 172 TABLE TOP MODIFICATIONS AND OPTIONS: E27 . . . . . . . . . Top cutout square or round . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . . 264 E27A . . . . . . . . Top cutout and reinforcement, for heavy drop-in equipment (specify model) . . . . . . . . . EA . . . . . . . 383 E29 . . . . . . . . . Urn Trough w/drain and louvered grate . . . . . . . . . . . . LIN. FT. . . . . . 133 E32 . . . . . . . . . Can Opener Provision . . . . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . . 187 E34 . . . . . . . . . Column cutout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . . 614 E37 . . . . . . . . . NSF sprayed-on sound deadening . . . . . . . . . . . . . PER TABLE . . . . 596 E37A . . . . . . . . Sound deadening over 12 ft. (for ea. additional foot) . LIN. FT. . . . . . . 49 606329. . . . . . . Scrap Chute. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . . 208 E108A . . . . . . . Field joint, for worktables, ready to be bolted together in the field by others . . . . . . . . . . . . . . . . EA . . . . . . . 275 E108B . . . . . . . Field joint, for worktables, prepared for field welding by others . . . . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . . 275 E112. . . . . . . . . Mitered corner (backsplash or front edge angled). . . . . . EA . . . . . . . 622 606331. . . . . . . Knife rack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . . 301 E58 . . . . . . . . . Hole in top for electric cord . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . . 172 TABLE BASE MODIFICATIONS AND OPTIONS: E15 . . . . . . . . . Vertical Tray Dividers . . . . . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . . 622 E17 . . . . . . . . . Special Height Legs . . . . . . . . . . . . . . . . . . . . . . . . . . . TABLE . . . . . . 146 E19 . . . . . . . . . Stainless steel gussets . . . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . . . 32 E28 . . . . . . . . . Angle slides for pans, up to six pairs . . . . . . . . . . . . . . . SET . . . . . . . 545 E28A . . . . . . . . Angle slides for glass racks, up to four pairs . . . . . . . . . SET . . . . . . . 578 E31 . . . . . . . . . 1-1/2˝ rear upturn for undershelf . . . . . . . . . . . . . . . . . TABLE . . . . . . 115 E59 . . . . . . . . . Upgrade 16 ga. 304 stainless steel undershelf . . . . . . LIN. FT. . . . . . . 35 E35 . . . . . . . . . 16 ga apron front of sink or cutout. . . . . . . . . . . . . . . . LIN. FT. . . . . . 145 E36 . . . . . . . . . Fully welded. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . . 465 E36A . . . . . . . . Welded base only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . . 312

model # or suffix

description

unit

list

TABLE CASTERS AND FEET: 300698. . . . . . . Casters 4˝ with brake. . . . . . . . . . . . . . . . . . . . . . . . . . . . EA 300699. . . . . . . Casters 4˝ without brake . . . . . . . . . . . . . . . . . . . . . . . . . EA 317635. . . . . . . Casters 5˝ with brake. . . . . . . . . . . . . . . . . . . . . . . . . . . . EA 317636. . . . . . . Casters 5˝ without brake . . . . . . . . . . . . . . . . . . . . . . . . . EA 313835. . . . . . . Flanged bullet foot, stainless steel . . . . . . . . . . . . . . . . . EA 300692. . . . . . . Bullet foot, stainless steel . . . . . . . . . . . . . . . . . . . . . . . . EA 301036. . . . . . . Bullet foot, white metal . . . . . . . . . . . . . . . . . . . . . . . . . . EA 300293. . . . . . . Bullet foot, plastic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EA

. . . . . . . . 96 . . . . . . . . 91 . . . . . . . 124 . . . . . . . 124 . . . . . . . . 24 . . . . . . . . 17 .........9 .........2

ELECTRIC & PLUMBING MODIFICATIONS AND OPTIONS: E18 * . . . . . . . . . Duplex receptacle & mounting plate (under table) . . . . . EA . . . . . . . 369 E18.1 *. . . . . . . . Duplex receptacle in splash (requires at least 6˝-high backsplash) . . . . . . . . . . . . . . . EA . . . . . . . 357 E18.2 *. . . . . . . . Pedestal duplex receptacle (top of table or overshelf) . . EA. . . . . . . . 411 ENCLOSED BASE CABINET MODIFICATIONS AND OPTIONS: E85 . . . . . . . . . Removable access panel in front . . . . . . . . . . . . . . . . . . EA . . . . . . . 400 E27B . . . . . . . . Cutout in cabinet back or undershelf for plumbing . . . . . EA . . . . . . . 297 E86 . . . . . . . . . Provision for undercounter equipment. . . . . . . . . . . . . . . EA . . . . . . . 675 E87 . . . . . . . . . Tubular Tray Slide w/dropdown s/s brackets . . . . . . . . LIN. FT. . . . . . 155 E88 Solid Tray Slide w/dropdown s/s brackets. . . . . . . . . . . . . . . . . . . . . . LIN. FT . . . . . . . 258 E89 . . . . . . . . . Modify enclosed base table to 36˝ wide . . . . . . . . . . . . TABLE. . add 20% -L . . . . . . . . . . . Lock assembly for door . . . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . . 137 OVERSHELF MODIFICATIONS AND OPTIONS: E90 . . . . . . . . . Bullnose all sides shelf - no charge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 -HLB . . . . . . . . heat lamp brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PR . . . . . . . 187 E38-6 ** . . . . . . . . Cantilever mount up to 6', add to wall shelf price . . . . . . EA . . . . . . . 364 E38-12 ** . . . . . . . Cantilever mount up to 12', add to wall shelf price . . . . . EA . . . . . . . 544 E91 . . . . . . . . . pair L brackets for adding overshelf . . . . . . . . . . . . . . . . PR . . . . . . . . 86 E92 . . . . . . . . . Microwave extension . . . . . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . . 372 SINK WELDMENTS, MODIFICATIONS AND OPTIONS: E20A . . . . . . . . 10˝ X 14˝ X 9.5˝ Bowl . . . . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . . 993 E21 . . . . . . . . . 14˝ X 16˝ X 9.5˝ Bowl . . . . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . 1043 E22 . . . . . . . . . 16˝ X 20˝ X 8˝ Bowl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EA. . . . . . . 1113 E23 . . . . . . . . . 16˝ X 20˝ X 14˝ Bowl . . . . . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . 1234 E24 . . . . . . . . . 18˝ X 20˝ X 14˝ Bowl . . . . . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . 1353 E24A . . . . . . . . 20˝ X 20˝ X 14˝ Bowl . . . . . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . 1362 E25 . . . . . . . . . 24˝ X 24˝ X 14˝ Bowl . . . . . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . 1844 313304. . . . . . . T&S faucet upgrade. . . . . . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . . 552 E93 . . . . . . . . . Glass Filler with faucet, trough and grate, installed . . . . EA . . . . . . 1396 E94 . . . . . . . . . Glass Filler only, no trough, installed. . . . . . . . . . . . . . . . EA . . . . . . . 686 E95 . . . . . . . . . Ice Bin and fill faucet with trough and grate, installed. . . EA . . . . . . 3029 FAUCETS AND ACCESSORIES: 313918. . . . . . . Faucet, std. splash mtd. 8˝L, 8˝o.c. . . . . . . . . . . . . . . . . . EA 300716. . . . . . . Faucet, std. splash mtd. 12˝L, 8˝o.c. . . . . . . . . . . . . . . . . EA 300804. . . . . . . Faucet, std. splash mtd. 14˝L, 8˝o.c. . . . . . . . . . . . . . . . . EA 313919. . . . . . . Faucet, std. splash mtd. 16˝L, 8˝o.c. . . . . . . . . . . . . . . . . EA 313920. . . . . . . Faucet, T&S splash mtd. 8˝L, 8˝o.c. . . . . . . . . . . . . . . . . EA 340380. . . . . . . Faucet, T&S splash mtd. 10˝L, 8˝o.c. . . . . . . . . . . . . . . . EA 313293. . . . . . . Faucet, T&S splash mtd. 12˝L, 8˝o.c. . . . . . . . . . . . . . . . EA 313294. . . . . . . Faucet, T&S splash mtd. 14˝L, 8˝o.c. . . . . . . . . . . . . . . . EA

DRAWER MODIFICATIONS AND OPTIONS: -L . . . . . . . . . . . Lock assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . . 137 E84 . . . . . . . . . Hasp for padlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . . 252 NTD3I . . . . . . . Three Drawers integral to table . . . . . . . . . . . . . . . . . . . . EA . . . . . . 3234

* - for GFI receptacle, add “-GFI” to E number (example: E18.1-GFI) and $37 to list price. ** - applicable to wall mount shelves and pot racks

338

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

. . . . . . . 202 . . . . . . . 208 . . . . . . . 212 . . . . . . . 213 . . . . . . . 540 . . . . . . . 551 . . . . . . . 554 . . . . . . . 559


CUSTOM OPTIONS / ACCESSORIES For Tables, Sinks, and Dishtables (continued) Please note: Suffixes are typically indicated by the dash (“-”) preceding numbers and/or letters. model # or suffix

description

unit

list

PRERINSE FAUCETS AND ACCESSORIES: 300719. . . . . . . Prerinse Faucet, std. splash mtd. 8˝o.c. . . . . . . . . . . . . . EA 300718. . . . . . . Prerinse Faucet, std. deck mtd.. . . . . . . . . . . . . . . . . . . . EA 301189 . . . . . . . Prerinse Faucet 12˝ Add-on Spout . . . . . . . . . . . . . . . . . EA 301190 . . . . . . . Prerinse Wall Bracket, std. . . . . . . . . . . . . . . . . . . . . . . . EA 313116 . . . . . . . Prerinse Hose, 36˝L, std.. . . . . . . . . . . . . . . . . . . . . . . . . EA 313323. . . . . . . Prerinse Spray Valve, std. . . . . . . . . . . . . . . . . . . . . . . . . EA 313296. . . . . . . Prerinse Faucet, T&S. splash mtd. 8˝o.c. . . . . . . . . . . . . EA 313295. . . . . . . Prerinse Faucet, T&S. deck mtd.. . . . . . . . . . . . . . . . . . . EA 313297. . . . . . . Prerinse 12˝ Add-on Faucet . . . . . . . . . . . . . . . . . . . . . . EA

. . . . . . 1033 . . . . . . 1029 . . . . . . . 274 . . . . . . . . 69 . . . . . . . 196 . . . . . . . 169 . . . . . . 1352 . . . . . . 1273 . . . . . . . 337

DRAINS AND ACCESSORIES: 300720. . . . . . . Lever drains, 1.5˝. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EA 300721. . . . . . . Lever drains, 2˝ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EA 300722. . . . . . . Lever drains, 2˝ with overflow . . . . . . . . . . . . . . . . . . . . . EA 341189 . . . . . . . Twist handle drains, 1.5˝ . . . . . . . . . . . . . . . . . . . . . . . . . EA 336002. . . . . . . Twist handle drains, 2˝. . . . . . . . . . . . . . . . . . . . . . . . . . . EA 341190 . . . . . . . Twist handle drains, 2˝ with overflow. . . . . . . . . . . . . . . . EA -TB. . . . . . . . . . Twist drain handle bracket. . . . . . . . . . . . . . . . . . . . . . . . EA 313834. . . . . . . Backflow Preventer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EA 300789. . . . . . . P-Trap, Chrome Plated . . . . . . . . . . . . . . . . . . . . . . . . . . EA 300791. . . . . . . Tail Piece . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EA 313832. . . . . . . Anti-Siphon Vacuum Breaker. . . . . . . . . . . . . . . . . . . . . . EA 300287. . . . . . . Crumb Cup Strainer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . EA

. . . . . . . 213 . . . . . . . 213 . . . . . . . 438 . . . . . . . 225 . . . . . . . 225 . . . . . . . 509 . . . . . . . . 27 . . . . . . . 189 . . . . . . . . 83 . . . . . . . . 15 . . . . . . . 162 . . . . . . . . 19

SINK COVERS / CUTTING BOARDS: 313207. . . . . . . Polyboard, 10˝ x 14˝ . . . . . . . . . . . . . . . . . . . . . . . . . . . . EA 351584. . . . . . . Polyboard, 16˝ x 20˝ . . . . . . . . . . . . . . . . . . . . . . . . . . . . EA 335377. . . . . . . Polyboard, 18˝ x 20˝ . . . . . . . . . . . . . . . . . . . . . . . . . . . . EA 326267. . . . . . . Polyboard, 20˝ x 20˝ . . . . . . . . . . . . . . . . . . . . . . . . . . . . EA 313204. . . . . . . Polyboard, 22˝ x 22˝ . . . . . . . . . . . . . . . . . . . . . . . . . . . . EA 326268. . . . . . . Polyboard, 18˝ x 24˝ . . . . . . . . . . . . . . . . . . . . . . . . . . . . EA 313205. . . . . . . Polyboard, 24˝ x 24˝ . . . . . . . . . . . . . . . . . . . . . . . . . . . . EA 326269. . . . . . . Polyboard, 20˝ x 28˝ . . . . . . . . . . . . . . . . . . . . . . . . . . . . EA 321555. . . . . . . Stainless steel, 10˝ x 14˝ . . . . . . . . . . . . . . . . . . . . . . . . . EA 351585. . . . . . . Stainless steel, 16˝ x 20˝ . . . . . . . . . . . . . . . . . . . . . . . . . EA 346175. . . . . . . Stainless steel, 18˝ x 20˝ . . . . . . . . . . . . . . . . . . . . . . . . . EA 305428. . . . . . . Stainless steel, 20˝ x 20˝ . . . . . . . . . . . . . . . . . . . . . . . . . EA 321557. . . . . . . Stainless steel, 22˝ x 22˝ . . . . . . . . . . . . . . . . . . . . . . . . . EA 326270. . . . . . . Stainless steel, 18˝ x 24˝ . . . . . . . . . . . . . . . . . . . . . . . . . EA 321558. . . . . . . Stainless steel, 24˝ x 24˝ . . . . . . . . . . . . . . . . . . . . . . . . . EA 326271. . . . . . . Stainless steel, 20˝ x 28˝ . . . . . . . . . . . . . . . . . . . . . . . . . EA

. . . . . . . 123 . . . . . . . 140 . . . . . . . 144 . . . . . . . 146 . . . . . . . 151 . . . . . . . 147 . . . . . . . 163 . . . . . . . 162 . . . . . . . 153 . . . . . . . 174 . . . . . . . 183 . . . . . . . 185 . . . . . . . 194 . . . . . . . 188 . . . . . . . 238 . . . . . . . 191

SINK SPLASH MODIFICATIONS AND OPTIONS: E101A . . . . . . . Turn down backsplash (with z-clips). . . . . . . . . . . . . . . TABLE . . . . . . 223 E30 . . . . . . . . . End splash - per end, all heights . . . . . . . . . . . . . . . . . . . EA . . . . . . . 287 E44 . . . . . . . . . Faucet Hole Revision (adding or moving) . . . . . . . . . . . . EA . . . . . . . 152 E46 . . . . . . . . . Scrap Block Installed (Rubber) . . . . . . . . . . . . . . . . . . . . EA . . . . . . . 331 E48 . . . . . . . . . Stainless steel apron to cover sink bowls (2 or 3) . . . . . SET . . . . . . . 996 E48A . . . . . . . . additional compartments over 3 . . . . . . . . . . . . . . . . . . . EA . . . . . . . 166 E52 . . . . . . . . . High backsplash up to 13˝ . . . . . . . . . . . . . . . . . . . . . . LIN. FT. . . . . . 160 E53 . . . . . . . . . High backsplash up to 18˝ . . . . . . . . . . . . . . . . . . . . . . LIN. FT. . . . . . 286 E56 . . . . . . . . . Overflow Holes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . . . 40 SINK DRAINBOARD MODIFICATIONS AND OPTIONS: E45 . . . . . . . . . Drain trough installed in drainboard or dishtable. . . . . . . EA . . . . . . . 828 E49 . . . . . . . . . Undershelf under drainboard 24˝ long. . . . . . . . . . . . . . . EA . . . . . . . 535 E49A . . . . . . . . additional charge over 24˝ long . . . . . . . . . . . . . . . . . . LIN. FT. . . . . . 235 E51 . . . . . . . . . Optional size drainboard . . . . . . . . . . . . . . . . . . . . . . . LIN. FT. . . . . . 308 E55 . . . . . . . . . Drainboard corner turn. . . . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . 1256

model # or suffix

description

unit

list

SINK COMPARTMENT MODIFICATIONS AND OPTIONS: E40 . . . . . . . . . Provision for sink heater . . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . . 163 E41 . . . . . . . . . Disposal provision package, collar . . . . . . . . . . . . . . . . . EA . . . . . . . 675 E41A . . . . . . . . Disposal provision package, cone . . . . . . . . . . . . . . . . . . EA . . . . . . . 675 E41B . . . . . . . . Provision for scrap collector and troughveyor . . . . . . . . . EA . . . . . . 1256 E43 . . . . . . . . . Stand pipe w/corner guard . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . . 204 E47 . . . . . . . . . Sink cover holder, upper/lower track (for s/s or poly) . . SLOT . . . . . . 622 E50 . . . . . . . . . Provision for water pump. . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . 1396 SINK BASE MODIFICATIONS AND OPTIONS: E54 . . . . . . . . . Working height revision . . . . . . . . . . . . . . . . . . . . . . . . TABLE . . . . . . 272 E36 . . . . . . . . . Fully welded. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . . 465 E36A . . . . . . . . Welded base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . . 312 E108 . . . . . . . . Welded field joint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . . 245 E96 . . . . . . . . . Control Panel Bracket 6x9. . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . . 220 E96A . . . . . . . . Control Panel Bracket 9x12. . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . . 331 300692. . . . . . . Bullet feet, stainless steel . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . . . 17 313835. . . . . . . Flanged bullet feet, stainless steel . . . . . . . . . . . . . . . . . EA . . . . . . . . 24 311772 . . . . . . . Legs and crossbrace assembly . . . . . . . . . . . . . . . . . . . . EA . . . . . . . 171 DISHTABLE BACKSPLASH MODIFICATIONS AND OPTIONS: E101 . . . . . . . . Splash 10˝ per linear ft. (dishtable only) . . . . . . . . . . . LIN. FT. . . . . . . 56 E101A . . . . . . . Turn down backsplash (with z-clips). . . . . . . . . . . . . . . TABLE . . . . . . 223 E30 . . . . . . . . . End splash - per end, all heights . . . . . . . . . . . . . . . . . . . EA . . . . . . . 287 DISHTABLE TOP MODIFICATIONS AND OPTIONS: E100 . . . . . . . . Additional length NSF Construction . . . . . . . . . . . . . . . LIN. FT. . . . . . 325 E102 . . . . . . . . Pass-thru shelf max. 12˝ up to 3 lin. ft. . . . . . . . . . . . . LIN. FT. . . . . 1869 E102A . . . . . . . additional over 36˝ for pass-thru shelf . . . . . . . . . . . . . LIN. FT. . . . . . 622 E106 . . . . . . . . Rack guide curved 2x1/4 s/s flat bar (requires E112) . . . EA . . . . . . . 327 E107 . . . . . . . . Corner turn 90 degrees . . . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . 1256 E108B . . . . . . . Field joint, prepared for field welding by others. . . . . . . . EA . . . . . . . 275 E109 . . . . . . . . Cutout for pipes, columns . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . . 614 E112. . . . . . . . . Mitered Corner. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . . 627 E119. . . . . . . . . Landing shelf 12˝W integral with top . . . . . . . . . . . . . . LIN. FT. . . . . . 221 E120 . . . . . . . . Limit switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . . 163 E97 . . . . . . . . . Provision for side loader . . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . . 686 E98 . . . . . . . . . Modify for custom machine opening . . . . . . . . . . . . . . . . EA . . . . . . . 286 DISHTABLE SCRAPPING MODIFICATIONS AND OPTIONS: E115. . . . . . . . . Scrapping Trough 6˝x4˝ deep—up to 60˝ . . . . . . . . . . LIN. FT. . . . . 1525 E115A . . . . . . . additional over 60˝ . . . . . . . . . . . . . . . . . . . . . . . . . . . . LIN. FT. . . . . . 261 E115B . . . . . . . Mitered angle in scrapping trough . . . . . . . . . . . . . . . . . . EA . . . . . . . 661 E116. . . . . . . . . Scrap Block installed (Rubber) . . . . . . . . . . . . . . . . . . . . EA . . . . . . . 331 300691. . . . . . . Replacement rubber scrap block. . . . . . . . . . . . . . . . . . . EA . . . . . . . . 94 DISHTABLE SINK WELDMENT MODIFICATIONS AND OPTIONS: E105 . . . . . . . . Prerinse sink 20˝ x 20˝ x 5˝ . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . . 953 E105A . . . . . . . for each additional 2˝ in depth . . . . . . . . . . . . . . . . . . . . . EA. . . . . . . . 115 E110. . . . . . . . . Sink 24˝ x 26 1/2˝ x 14˝ . . . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . 1725 E117. . . . . . . . . Soak sink 16˝ x 20˝ x 13 1/2˝ . . . . . . . . . . . . . . . . . . . . . EA . . . . . . 1234 E122 . . . . . . . . Faucet Holes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . . 154 E20 . . . . . . . . . 10˝ x 14˝ x 5˝ sink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . . 993 E20A . . . . . . . . 10˝ x 14˝ x 9.5˝ sink. . . . . . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . . 993 E24A . . . . . . . . 20˝ x 20˝ x 14˝ sink bowl . . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . 1362 DISHTABLE BASE MODIFICATIONS AND OPTIONS: E111. . . . . . . . . Undershelving stainless steel, per linear foot . . . . . . . LIN. FT. . . . . . 256 E113. . . . . . . . . Brackets for booster heater, installation only, brackets by others. . . . . . . . . . . . . . . . . EA . . . . . . . 143 E118. . . . . . . . . Crossbracing left-to-right, stainless steel . . . . . . . . . . . LIN. FT. . . . . . . 83 DISHTABLE RACK SHELF MODIFICATIONS AND OPTIONS: E103 . . . . . . . . Rack shelf, back splash mounted . . . . . . . . . . . . . . . . . . FT. . . . . . . . 463 E104 . . . . . . . . Drain, bleeder type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EA. . . . . . . . 115

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

339


CUSTOM OPTIONS / ACCESSORIES

For Underbar 1800 Series list price 328

2200 Series list price 398

model # description E60 Workboards (min. 4´0˝) per linear foot Sinks: E61 - hand sink 10˝ x 14˝ x 5˝ w/drain faucet 306 306 358 358 E61A - sink bowl 10˝ x 14˝ x 91⁄2˝ w/drain, faucet & overflow E61B - sink bowl 12˝ x 14˝ x 91⁄2˝ w/drain, faucet & overflow 445 445 Cocktail units 151⁄2˝ x 193⁄4˝ bowls: E62 - 24˝ unit, 6 bottle wells, inside liner, no cover 1227 1347 E62A - 36˝ unit, 8 bottle wells, outside liner, sliding s/s cover 1616 1736 E63 Ice chest 151⁄2˝ x 193⁄4˝ x 8˝ deep 1572 1937 E64 Ice chest w/sliding s/s cover 151⁄2˝ x 193⁄4˝ x 8˝ deep 1201 1321 E65 Higher backsplash up to 9˝ high per linear foot 96 96 Blender step unit w/liquid waste chute, faucet, electrical outlet: E66 - 12˝ wide single station 1154 1338 E66A - 14˝ wide double station 1242 1421 E67 Blender recess 12˝ (305mm) wide with electrical GFCI outlets 837 923 E68 Open waste chute installed 373 373 E69 Liquid waste chute installed 448 448 E70 Glass filler 308 308 E71 Cutout in back (2200 only) 1294 E72 End splash per end 523 562 E73 “L” shape corner welded per corner (except sink bowls) price upon application E74 Pass-thru 685 815 E75 Blender shelf 12˝ wide, removable hook-on type 377 377

model # 300712 300670 300325 300491 300805 326636 303365 E76 300713 300819 E77 359032 E78 E79 E80 E80A E81 300293 E83

1800 2200 Series Series list list description price price Towel bar, 24˝ (610mm)-long, stainless steel - shipped loose 84 84 Sliding s/s ice cover for 151⁄2˝ x 193⁄4˝ bowl (non NSF) 374 374 Rack for round bottle wells 136 136 Bottle holder, individual 36 36 Bottle holder trays (not installed) hold 4 bottles each 66 66 Poly cutting board 15˝ x 15˝ x 1⁄2˝ (not attached) poly-plastic 148 148 Faucet - 10˝ spout, splash mount 160 160 Divider for ice chest (removable), installed at factory 333 333 - Bottle opener and 114 114 - Cap catcher (not attached) for both for both Duplex GFCI receptacle, installed 288 288 Post-mix cold plate for 151⁄2˝ x 193⁄4˝ bowl, 7-circuit, sealed-in (NSF) 1419 1419 Glass rack storage, holds (2) 20˝ x 20˝ racks 1240 1240 Continuous water waste 668 668 Pass-thru ice chests: - 18˝ x 36˝ x 8˝ 2359 2359 - 24˝ x 36˝ x 8˝ 2662 2662 Stainless steel leg, each 69 69 Plastic bullet foot, each 2 2 NSF sprayed-on latex sound deadening, up to 12´(3658mm) length 596 596 - for each additional foot 49 49 Modular Add-on Fillers and Corner see page 263 for Drainboards—front and rear sections models and list prices see page 266 for Double speed rail models and list prices

For Ventilation Hoods model # description unit list E150 . . . . 3˝ Air Space - on front side of unit . . . . . . . . . . . . . . . . . . LIN. FT. . . . . 67 E151 . . . . 3˝ Air Space - on left side of unit . . . . . . . . . . . . . . . . . . PER SIDE . . 284 E152 . . . . 3˝ Air Space - on right side of unit . . . . . . . . . . . . . . . . . PER SIDE . . 284 E153 . . . . Insulated Back - on front side of unit. . . . . . . . . . . . . . . . . LIN. FT. . . . . 67 E154 . . . . Insulated Back - on back side of unit . . . . . . . . . . . . . . . . LIN. FT. . . . . 67 E155 . . . . Insulated Back - on left side of unit . . . . . . . . . . . . . . . . . . LIN. FT. . . . . 67 E156 . . . . Insulated Back - on right side of unit. . . . . . . . . . . . . . . . . LIN. FT. . . . . 67 E157 . . . . Stainless Steel Furring Channel - on front side of unit . . . LIN. FT. . . . 138 E158 . . . . Stainless Steel Furring Channel - on back side of unit . . . LIN. FT. . . . 138 E159 . . . . Stainless Steel Furring Channel - on left side of unit . . . . LIN. FT. . . . 138 E160 . . . . Stainless Steel Furring Channel - on right side of unit . . . LIN. FT. . . . 138 E161 . . . . Stainless Steel Trim Strips - on front side of unit . . . . . . . LIN. FT. . . . . 27 E162 . . . . Stainless Steel Trim Strips - on back side of unit . . . . . . . LIN. FT. . . . . 27 E163 . . . . Stainless Steel Trim Strips - on left side of unit . . . . . . . . LIN. FT. . . . . 27 E164 . . . . Stainless Steel Trim Strips - on right side of unit . . . . . . . LIN. FT. . . . . 27

340

model # description unit list E165 . . . . Extra Collars -exhaust collar . . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . 517 E166 . . . . Extra Collars - supply collar . . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . 517 E167 . . . . Extra Supply Fire Damper. . . . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . 340 E168 . . . . Filter Frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . 107 E169 . . . . Light Switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . 232 E170 . . . . Extra Bullet Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . 323 E174 . . . . Enclosure Panels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LIN. FT. . . . 219 E175 . . . . Insulated Make-Up Air Plenum . . . . . . . . . . . . . . . . . . . . . LIN. FT. . . . 287 316269 . . Add’l Mounting Channel . . . . . . . . . . . . . . . . . . . . . . . . . . LIN. FT. . . . . 94 331677 . . Extra Grease Cups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . 94 332493 . . Extra Grease Filters - aluminum . . . . . . . . . . . . . . . . . . . . . . EA . . . . . . 78 332494 . . Extra Grease Filters - steel . . . . . . . . . . . . . . . . . . . . . . . . . . EA . . . . . 137

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


SpecFAB® Custom Fabrications Chef’s Counter ..................................348 Custom Refrigeration ........................348 Custom Fabrication For Supermarkets..........................345 Elite Series Counters..........................347

Ozone Prep Station ............................347 Premium Modular Counters ..............347 Shelf SelectTM ....................................344 Spec-Bar SelectTM ..............................343

Sport Complex Project Management..................................346 The SpecFAB® Division ......................342 Uni-Wall® Concession Counters ........346

CUSTOM C

UL ®

US

NSF

®

NEW

CUSTOM COSMETICS AVAILABLE!!

Laser-Cutting and Custom Decal Services!

Put

here. (laser-cut shown)

Laser-Cutting… • Offers a “high-tech” look. • Creates smooth curves along text/artwork. • Choose from various plastic laminates, woods, stainless steel, designer aluminum, magnetic sheets…more.

Decals… • Industrial-strength, factoryapplied, yet more economical. (custom decal for Smyrna • Image is printed on vinyl material High School, Smyrna, DE) with adhesive backing.

Eagle provides a 3D rendering of your logo or design prior to production.


SpecFAB® CUSTOM FABRICATIONS Catalog Section 100

NSF

C

®

UL ®

US

Eagle's SpecFAB® Division fills the gap between standard equipment and high-cost, highly customized equipment. Depending on the custom need, configurations can be designed from pre-fab pieces by using existing components, or designed completely from scratch to match exacting consultant and architect’s plans and details. This flexibility means custom equipment can be delivered faster and at a lower cost directly to the job site.

Frequently Asked Questions about Project Quotations: How do I request a Quote? • Standard or modified product using listed 'E' numbers from the catalog: - Email requests to the Customer Service Representative for your geographical area or custserv@eaglegrp.com - Telephone (800) 441-8440 and ask for the Customer Service Representative for your city and state. - Fax (302) 653-2065 - Eagle Group, ATTN: Customer Service, I00 Industrial Blvd., Clayton, DE 19938 • Custom products not found in the catalog: - Email requests to quotes@eaglegrp.com - Fax (302) 653-3091 - Eagle Group, ATTN: Project Quotations, I00 Industrial Blvd., Clayton, DE 19938 What to include with your request? - Your Name and Dealer Name - Job or Project Name - Required Date for Quote - Bid Date for Project

- Projected Installation Date and Timeline - Consultant Name when Applicable - Plans and Specs related to the Project - Special Considerations

How long will it take to process my request for a custom quote? - Typical lead time of 72 hours for most new incoming projects. - Large scale projects will carry longer lead times. Please be sure to communicate required bid dates. How can I find out the status of my custom quote request? - Customer Service - The Customer Service representative for your area can access information regarding the status of your request via email or call (800) 441-8440. - SpecFAB® Customer Service. - SpecFAB® Quote Coordinator - call (800) 441-8440 and ask for the Quote Coordinator, Christina Martin, ext. 2784. - Outgoing email signatures for quotes sent from SpecFAB® highlight the primary points of contact.

Frequently Asked Questions about Project Submittals: How do I get a Submittal Drawing? - Submit a purchase order for the project with plans and specifications if not previously provided to the Quotations Department. - Provide a letter of intent for the project. - Request quote drawings via quotes@eaglegrp.com. - Shelf Select™ and SpecBAR™ Select requests through quotes@eaglegrp.com. How long will it take to receive drawings? - Typical requests for drawings are addressed within 72-hours. - Large scale projects will carry longer lead times. Please be sure to communicate required bid dates. - To contact Project Submittals regarding your drawings, contact the Submittals Coordinator, Bruce Moffett at bmoffett@eaglegrp.com or (800) 441-8440, ext. 3158. - Outgoing email signatures for drawings sent from SpecFAB® highlight the primary points of contact.

342

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


SpecFAB® CUSTOM FABRICATIONS Catalog Section 100

Spec-Bar Select A No-Cost Design & Layout Service for Bar Equipment.

by

Provide Us With: • Scaled floor plan. • Required number of service stations. • Any additional specific or pertinent working requirements.

And We’ll Provide You With: • Plan View Underbar equipment layout makes the most efficient utilization of your space available. • Elevation View* Illustrates the proposed equipment assembled in the available space.

P L A N V I E W

• Quote* Includes model numbers, net prices and shipping weights for all components in specified job. * Will be provided after plan view is approved.

Spec-Bar® is available in numerous colors and patterns, along with high profile hardwoods and composites to fit the decor of any room or theme.

For more information about Spec-Bar Select™, request Spec-Bar Select™ service announcement EG8202

Isometric view of modular bar die showing cantilever Spec-Bar® equipment with optional pedestal base.

ISOMETRIC VIEW

Simply

Email: quotes@eaglegrp.com Fax: 302-653-3091 in your request and our trained staff will begin planning, layout and quotation upon receipt. A completed Spec-Bar Select™ custom layout and quotation will be mailed, emailed or faxed back to you within 48 hours.

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

FINAL OUTCOME!

343


SpecFAB® CUSTOM FABRICATIONS Catalog Section 100

Shelf Select A No-Cost Design & Layout Service for Shelving Products.

by

Typical Shelf Select™ applications include walk-in coolers and freezers; dry storage areas; supermarkets; and department stores.

Provide Us With: • • • • •

P L A N

Dimensions of a storage space available. Number of shelves per unit. Post heights. Indicate stationary, mobile or high density shelving. Any additional specific or pertinent storage requirements.

And We’ll Provide You With:

V I E W

• Plan View Shelving system layout makes the most efficient utilization of your space available. • Perspective View* Illustrates the proposed equipment assembled in the available space. A great tool for presentation which reduces field assembly time when provided to your installer. • Quote* Includes model numbers, net prices and shipping weights for all components in specified job. * Will be provided after plan view is approved.

For more information about Shelf Select™, request Shelf Select™ service announcement EG8027

Simply

P E R S P E C T I V VIEW

Email: quotes@eaglegrp.com Fax: 302-653-3091 in your order and our trained staff will begin planning, layout and quotation upon receipt. A completed Shelf Select™ custom layout and quotation will be mailed, emailed or faxed back to you within 48 hours.

See page 345 for Custom Fabrication for Supermarkets.

344

FINAL OUTCOME! 100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


SpecFAB® CUSTOM FABRICATIONS Catalog Section 100

Custom Fabrication for Supermarkets A No-Cost Layout Service! The custom equipment solutions for your Island Service Bars, Supermarket Cafe, Salad Bar, Seafood and Produce Prep Areas, Deli, Bakery, Meat Packing Room and more, are all here with virtually unlimited choices and configurations. Whether your application is simple, such as a freestanding piece of equipment, or complex, requiring an entire line-up of custom equipment, our SpecFAB® division is ready to serve you.

by

Q U O T E

And We’ll Provide You With: • Plan View (AutoCAD 2005 format) Plan view layout makes the most efficient utilization of your space available. • Elevation View Illustrates the proposed equipment assembled in the available space. • Quote Includes model numbers, net prices and shipping weights for all components in specified job.

For more information about Custom Fabrication for Supermarkets, request service announcement EG8201

PLAN VIEW

Simply

Email: quotes@eaglegrp.com Fax: 302-653-3091 in your request and our trained staff will begin planning, layout and quotation upon receipt. A completed Shelf Select™ custom layout and quotation will be mailed, emailed or faxed back to you for your review. 100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

ELEVATION VIEW

345


SpecFAB® CUSTOM FABRICATIONS Catalog Section 100

Sport Complex Project Management From project planning to closeout, you and our project management team will develop the project objectives and define the scope insuring your project is measured by results, not just dates. Our sports complex resumé ranges from local neighborhood parks to the most current professional sports facilities. We provide this service for all Eagle products from our standard catalog items to custom fabricated equipment, and include everything in one integrated package!

Uni-Wall® Concession Counters see product announcement

EG8131 FEATURES:

concession counter with tubular base rear support and open front exposing chase

FINISHES AVAILABLE:

REAR SUPPORT CONFIGURATIONS AVAILABLE:

• Utilizes 12 gauge galvanized Uni-Wall® stud framing assembly with utility and beverage line chase. • Available in random lengths. • Top is offered in the following finishes: - 14 gauge type 304 stainless steel. - Plastic laminate of your choice. - A variety of Corian® decorative patterns. - Elegant hardwood tones. • Front Panels are offered in the following finishes: - Stainless steel. - Plastic laminate of your choice. - Elegant hardwood tones. • 15⁄8˝ (41mm) diameter stainless steel tubular base. • Heavy gauge stainless steel cabinet. • Wire shelving featuring patented QuadTruss® design or heavy gauge solid shelving.

concession counter stainless steel front panels - middle panel removed to expose electrical, plumbing and beverage lines

Each section of the Uni-Wall® is skidded before it is shipped from the factory. Each unit arrives with the necessary electrical lines run, plumbing in place and the beverage chase accessible and ready for immediate placement and hook-up when specified.

Aloha High School - Beaverton, Oregon

346

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


SpecFAB® CUSTOM FABRICATIONS Catalog Section 100

NEW

NEW

Elite Series Counters see product announcement

CUSTOM

Ozone Prep Station see product announcement

A new innovative way to design and build counters! The look of the counter is only limited by your imagination. This Elite Series of counters is all about the ‘look’ and ‘functionality’. The customer can utilize many different tops, front panel material, tray slides, buy-out equipment etc. to attain just the look you want. Heavy gauge stainless steel construction, with curb style base constructed of 16 gauge type 304 stainless steel. Solid top is offered in stainless steel or stainless steel swirl finish. Exterior Panels—available with graphics—are offered in plastic laminates, natural woods, stainless steel, powder-coated, and brushed aluminum. Tray slides with inverted “V” stainless steel are available with square or round tubing. Choice of storage solutions include drawers, work shelves, plate shelves, and cabinets.

EG8116

CUSTOM

EG8117

This unique prep station allows for designs to optimize the available space in all types of kitchens. All components can be brought together to combine all kinds of food prep within the area. All the different cutting boards are within reach. Ease of cleaning systems allows for quick changes between food products. Convenient positioning of refrigeration, close sorting of cut products, along with convenient disposal of waste products and thorough cleaning system, allows for smooth transition between products with minimal interruption between finishing one job, cleaning up, and being ready for the next ingredient.

Premium Modular Counters - PMC NEW

see product announcement

CUSTOM

EG8118

Premium Modular Counters afford the user complete flexibility. Sectional frame work allows for free standing equipment to be added or replaced as needed based on changing menu’s, or repair issues without using tools. Roll-out the old and roll in the new. Features include heavy gauge type 304 stainless steel top, stainless steel end panels, 4˝ wide stainless steel partitions. Stationary and portable units available.

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com

347


SpecFAB® CUSTOM FABRICATIONS Catalog Section 100

SpecFAB® Refrigeration see product announcement

EG8119

Engineered and designed to be an integral part of custom fabricated chef’s counters or serving counters. One-, two-, and three-door models feature self-contained or remote refrigeration, stainless steel flat top, sandwich style, or raised rail style refrigerator. Top and front exterior constructed of heavy gauge type 304 stainless steel. Door openings are finished with ABS breaker strips. Mullion, back, and top mount evaporator coils with digital thermostatic control. Foam-in-place urethane insulation throughout. 2˝ thick CFC free R-134A blown. Refrigeration system is R404A with expansion valve. Raised rail units come sized to fit six-1/6 pans through thirty1/6 hotel pans. Pan ledge is recessed 2˝ and will hold 6˝ deep pans (pans not provided), full width NSF cutting board and stainless steel hinged night cover. Sandwich style units come with one 12˝ x 20˝ opening per section with recessed pan ledge to hold 6˝ deep pans (pans not provided), full width NSF cutting board and stainless steel hinged night cover. Stainless steel hinged compressor access panel, furnished with dial thermometer mounted in front fascia.

CUSTOM

UL ®

CUSTOM

Chef’s Counter

Standard components used to create a system customized to meet your needs!

NSF

®

see product announcement

EG8123

by esigned by EAGLE’s SpecFAB® Division, these units are engineered to provide custom configurations using preengineered modular components.

D

Among the many modular design options are open based cabinets, closed base cabinets featuring either hinged or sliding doors as well as cabinets that accept hot well and refrigerated drop-ins. Refrigerated undercounter storage and drawers can also be accommodated in all modular designs. Island units are designed with chef and server pick-up sides at different heights. This design not only increases worker efficiency but also incorporates a unique tray-lock feature to prevent accidents and spills. If desired, the server side can also accommodate an 18˝ wide wire shelving unit positioned below the tray pick up surface. Choose from either stationary or mobile design options, depending on needs.

348

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


- Terms and Conditions PRICES All merchandise will be billed at our current published list prices in effect at the time of shipment.

PERFORMANCE All shipping dates are approximate. Fulfillment is always subject to availability of material and to conditions affecting shipment that are beyond our control. EAGLE shall not be held liable for any delay in performance due to reasons beyond our control.

SHORTAGE All claims for shortage must be brought to our attention within five (5) business days from date merchandise is received. Please be certain that you receive the number of packages signed for.

CANCELLATIONS Cancellations are not accepted on orders in transit or on custom items. Standard orders already in process that are cancelled will be subject to a 20% restocking charge.

RETURNS Custom and modified standard equipment is non-returnable. Authorization Policy for Standard Returns: a Previously written approval from EAGLE’s Customer Service is mandatory on all returns.

a Return authorization must be requested within 60 days from date of shipment.

a Authorized return shipments, in which merchandise is not defective and orders have been properly filled, must be shipped prepaid and properly packaged to prevent merchandise damage.

a Each return authorization number (located on the upper right hand corner of the form), must be written on the outside of each carton returned to EAGLE. Restocking: a Restocking and equipment repair fees for merchandise damaged during return shipment to EAGLE will be withheld from issued credit.

Restocking (continued): a Returns of made-to-stock merchandise are subject to a 30% restocking fee. a Returns of standard made-to-order merchandise are subject to a 50% restocking fee. a $75 net minimum on merchandise returns.

PRINTS & DRAWINGS All prints and drawings submitted with orders are accepted as a final approval in the custom order process. Errors that arise due to incorrect submittals are the responsibility of the customer. There are no cancellations on custom orders.

CONCEALED DAMAGES EAGLE’s responsibility ceases immediately upon the consignee signing for and receiving the product, be it noted damaged or not. If a container shows rough handling, it is your right to inspect the merchandise prior to signing the delivery receipt. Upon finding damage after delivery, notify the carrier immediately and save all packaging material. Follow up by filing a claim at once.

ORDER APPROVAL All orders are subject to final approval by EAGLE’s home office. Acceptance and/or performance shall be at all times subject to the approval of EAGLE’s Credit Department. Minimum order $50.00 net.

TERMS Discount and discount date are clearly marked at the bottom of each invoice should you be entitled to any discount, subject to current status of your account.

FOB All shipments are shipped from FOB point “collect” unless otherwise specified. All orders shipped prepaid and add will receive a 20% administrative surcharge added to the freight charge.

UPS All UPS shipments will be charged a minimum of $25.00.

- MONETARY VALUES ARE BASED ON U.S. CURRENCY. -

Distribution Locations (in U.S. only) For orders/sales, call 1-800-441-8440. The phone numbers of the following distribution points are for pickup information only.

In Delaware (corporate office): Eagle Group 100 Industrial Blvd. Clayton, DE 19938 Toll Free Ph: 1-800-441-8440

In Texas: Dallas Distribution c/o Storage Equipment Co. Inc. 1258 Titan Drive Dallas, TX 75247 Ph: 214-630-9221

All orders are to be sent to our corporate office. Please call our corporate office to place your order. All addresses are subject to change.

384

100 Industrial Boulevard, Clayton, DE 19938-8903 U.S.A. Phone: 800-441-8440 or 302-653-3000. Fax: 302-653-2065 http://www.eaglegrp.com


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.