HT-221-21633 REV00 - 1019

How To.........

Retro Fit Polyvee Drive Beta Beta 10 10 to to Beta Beta 38 38

CALIFORNIA - Proposition 65 Warning: Diesel engine exhaust and some of its constituents are known to the state of California to cause cancer, birth defects and other reproductive harm.

4K Polyvee Belt Drive Kit: AK/MINI/K/E01 {

BETA 10, 14, 16, 20 & 25 WITH 3 BOLT HEAT EXCHANGER END CAPS

The following is intended as a guide illustrating how to fit a 4K Polyvee Drive Upgrade Kit to the Beta Marine Mini Series family of engines.

1

For engines produced earlier than 2011 (with Single Bolt Heat Exchanger End Caps) a Crank Shaft Pulley with a PTO facility may be additionally required. These differ by engine model please contact Beta Marine for required part number and price.

Further modifications may be required to the alternator mounting brackets which are the responsibility of the installer.

201-08563 Water Pump Pulley - Including:

2

4x 217-99280 M6 x 16mm Set Screw 4x 217-99276 M6 Spring Washer 4x 217-99275 M6 8lat Washer

201-05549 Alternator Pulley

214-06535 4PK Drive Belt

201-08564 Drive Pulley - Including: 3x 217-99298 M8 x 20mm Set Screw 3x 217-99292 M8 Spring Washer 3x 217-99293 M8 8lat Washer

IMPORTANT! Set screws must be treated with thread lock prior to fitment. Pulley spacers from the original alternator pulley may have to be re-used to give correct alignment. It is important to check installation for correct pulley alignment.

2

6K Polyvee Belt Drive Kit: AK/S5H/100A/KS01 {

BETA 30, 35, & 38 WITH 3 BOLT HEAT EXCHANGER END CAPS

The following is intended as a guide illustrating how to fit a 6K Polyvee Drive Upgrade Kit to the Beta Marine Super 5 Series variable speed family of propulsion engines.

Further modifications may be required to the alternator mounting brackets which are the responsibility of the installer.

201-085433 Water Pump Pulley - Including:

1

4x 217-99280 M6 x 16mm Set Screw 4x 217-99276 M6 Spring Washer 4x 217-99275 M6 8lat Washer

201-02251 Alternator Pulley - Including: 200-91740 Spacer, Use Behind Retaining Nut & Pulley Face 217-02662 0.5mm Alignment Shim 217-02663 1mm Alignment Shim

214-04618 6PK Drive Belt

201-08564 Drive Pulley - Including: 3x 217-99298 M8 x 20mm Set Screw 3x 217-99292 M8 Spring Washer 3x 217-99293 M8 8lat Washer

IMPORTANT! Set screws must be treated with thread lock prior to fitment. Pulley spacers from the original alternator pulley may have to be re-used to give correct alignment. It is important to check installation for correct pulley alignment.

3

Beta Marine Limited, Davy Way, Waterwells, Quedgeley, Gloucester, GL2 2AD. UK. Tel: +44 (0)1452 723492 Fax: +44 (0)1452 883742 Email: sales@betamarine.co.uk Website: www.betamarine.co.uk Ref: HT 221-21633 REV 00 - 1019