Beta 43 – Beta 60 (HE/KC) Illustrated Parts List by Beta Marine

Illustrated Parts List

Heat Exchanger & Keel Cooled Mid Mid Diesel Diesel Engine Engine Range: Range: Beta Beta 43, 43, Beta Beta 50 50 & & Beta Beta 60 60

n e G uin Spa s en e re G uin Spa s en e re G uin Spa s en e r e G uin Spa s en e re G uin Spa s en e re G uin Spa s en e re G uin Spa s en e re G uin Spa s en e r e G uin Spa s en e re G uin Spa s en e re G uin Spa s en e re G uin Spa s en e re G uin Spa s en e r e G uin Spa s en e re G uin Spa s en e re G uin Spa s en e re G uin Spa s en e re G uin Spa s en e r e G uin Spa s en e re u S s

Note: Prices and specifications are subject to amendment without notice. Information given is subject to our current conditions of tender and sale. In all cases please quote Beta Marine WOC â&#x20AC;&#x2DC;Kâ&#x20AC;&#x2122; Number and Engine Type. Beta Marine will not be held responsible for incorrect supply without this information.

Spare Parts Listing Heat Exchanger & Keel Cooled Beta43, Beta50 and Beta60 Description

Part No

Qty/Engine

Wasting Zinc Anode

209-61840

Heat Exchanger “O” Ring (HEADER WITH SINGLE BOLT ENDCAP)

209-80110

Heat Exchanger “O” Ring (2011 HEADER WITH 3 BOLT ENDCAP)

212-07273

Pressure Cap 95kPa – 15 PSI

209-80130

Thermostat -M spec only –with front mounted stop solenoid

600-05289

Thermostat –pre M spec only, with side mounted stop solenoid

600-72450

Thermostat Gasket

600-80490

Fuel Filter (heat exchanger cooled)

211-60210

Fuel Filter (keel cooled)

211-02817

Air Filter Element –From Jan 2014 (Plastic body)

211-09179

Air Filter Element –End 2010 (3 CLAMP TYPE)

211-61831

Air Filter Element –From 2011 (WITH CENTRAL WING NUT)

211-08133

Adaptor sleeve to suit plastic body air filter assembly (from Jan 2014)

209-09225

211-70510/02

Sump Pump

210-80061

Sump Pump Clamp

212-00793

Stick

600-96320

Guide

600-96320/01

2 1 1 1 1

Lubricating Oil Filter

Dip Stick Extended Sea Water Pump –Beta type from January 2016 (& ALL BLUE SPOT PUMPS)

207-10708

Sea Water Pump –Beta type from June 2013 –End 2016

207-08923

Sea Water Pump –Johnson from Sept 2009 to June 2013

207-07415

Sea Water Pump –Jabsco to Sept 2009

207-80780

Sea Water Pump Impeller Kit –Beta type from June 2013

207-09042-KIT

Sea Water Pump Impeller Kit–Johnson from Sept 2009 to June 2013

207-09042-KIT

Sea Water Pump Impeller Kit–Jabsco to Sept 2009

207-80800

Sea Water Pump Shaft kit (includes shaft, mechanical seal, washer, circlip & O ring) –Beta type from June 2014 (BLUE SPOT)

207-10665

Sea Water Pump Shaft kit (includes shaft, mechanical seal, washer, circlip & O ring) –Beta type from June 2013-June2014

207-09231

Sea Water Pump Service Kit (inc gasket and screws) –Johnson from Sept 2009 to June 2013

207-07560

Sea Water Pump Service Kit (inc gasket and screws) –Jabsco to Sept 2009

207-80810

Prices and specifications are subject to amendment without notice. Information given is subject to our current conditions of tender and sale. In all cases please quote Beta Marine WOC ‘K’ number and Engine Type. Beta Marine will not be held responsible for incorrect supply without this information.

Heat Exchanger & Keel Cooled Beta43, Beta50 and Beta60 Part No

Qty/Engine

Beta43 / Beta60 & Beta50 from July2008

600-80870

Beta50 (to July2008)

600-00633

600-00538

Description Fuel Lift Pump Fuel Lift Pump Gasket

Belt

Standard for 45 Amp K/C, Beta43 & 50 only

600-07333

Standard for 45 Amp K/C, Beta60 only

600-04885

Standard for 175 Amp K/C only –to November 2009

214-04776

Standard for 175 Amp K/C only –from November 2009

214-00497

Std “V” – 65A / 70A, Beta43 to Sept08, Beta50 to July07

214-96830 Correctly

Std “V” – 65A / 70A, Beta43 from Sept08-April11, Beta50 from July07-April11 & Beta60

214-99223

Std “V” – 65A / 70A, Beta43,Beta50 & Beta60 –from April2011

214-80750

6K -100A, Beta43 to Sept08, Beta50 to July07

214-00497

6K- 100A, Beta43 from Sept08-Oct09, Beta50 from July07 & Beta60 –Oct09

214-92105

6K- 100A, Beta43, Beta50 & Beta60 –From Oct 2009

214-07037

Alternator

45 Amp Internal Fan (K/C only)

600-07245

175 Amp Internal Fan (K/C only)

200-05261

70 Amp External Fan (H/E) (Replacement for 65A)

200-01155

100 Amp Internal Fan

200-03008

120 Amp External fan

200-08183

Control Panel standard Key

To June 2008

Select a Belt

600-00058 a pair

From June 2008

600-00057

N/A

600-00057/01

200-00072

Tachometer 0-3000rpm with digital hour counter

200-02373/03

Water temperature switch Gauge (B & C panels)

200-96200

Oil pressure switch Gauge (C panels only)

200-96190

Voltmeter (C panels only)

200-96210

Green power on indicator lamp & retaining clip

200-04656

Red warning indicator lamp & retaining clip

200-04657

3 or 4

Alarm board – all panels from June 2005

200-04655

Relay 12 Volt 40A (28Ra) fitted to rear of panels

200-87020

Control Panel Key Switch Control Panel Stop Button (and heat & start on ABVW)

To June 2008

600-00058/01

From June 2008

Heat Exchanger & Keel Cooled Beta43, Beta50 and Beta60 Description

Stop Solenoid

Part No

Side mounted, energise to stop –All to July 2007 & Beta43 to Sept2008

600-71670

Front mounted, energise to run –Beta50 from July2007 –July2008 & Beta60 to Nov2009

600-06964

Front mounted, energise to stop –Beta43 from Sept08, Beta50 from July2008 & Beta60 from Nov09

600-02244

Qty/Engine

Fuse (Blade) 40 Amp

200-00959

Standard Engine Harness

200-05267

65 Amp Alternator Sub Loom Iskra

200-01196

1 Metre

200-04588/01

2 Metre

200-04588/02

3 Metre

200-04588/03

4 Metre

200-04588/04

Control panel extension loom

Water Temperature Switch (Panel A, ABV & ABVW)

To October 2008

200-01133

From November 2008

600-62820 1

Water Temp Sender (Panel C & B) 5/8UNF (Not Beta60 from Mar11)

200-94360

Water Temp Sender (Panel C & B) 1/8NPT –Beta60 from Mar11

200-08248

Oil Pressure Switch (Panel A, ABV, ABVW & B)

600-62670

Oil Pressure Sender (Panel C)

200-94350

Exhaust Bend Gasket

212-09070

Drive Plate

22-B-60 - TMC60

206-91950

PRM150 – Hydraulic –to Dec2009

206-03981

PRM150 – Hydraulic –from Dec2009

206-07584

PRM260 / PRM280 - Hydraulic

206-02095

ZF25 – Hydraulic – CHECK WOC WITH BETA

206-05185

(Metalastic type 45)

213-85900/02

(Metalastic type 55)

213-96970/01

Flexible Mountings

Rocker Cover Gasket (from Jan 2006)

600-06374

Operators Maintenance Manual

221-02889

Workshop Manual– base engine only

600-00758

Spare Parts Manual – base engine only, Beta43, 50 & 60 (available as a pdf)

600-02441

Contents / Index 2

Quick reference parts listing

Illustrated quick reference parts listing –from January 2012 only

Illustrated quick reference parts listing –to January 2012 only

Fresh water system –2011 Specification 3 bolt manifold

Fresh water system –heat exchanger tank components

Fresh water system –sea water pump, pipe-work and water injection bend

Fresh water system –hydraulic gearboxes

Fresh water system –ZF15M gearboxes

ZF25H gearbox assembly

PRM150 gearbox assembly

ZF12M / ZF15M gearbox assembly

PRM260 / PRM280 gearbox assembly

TMC60 gearbox assembly

Oil system & engine sump

Alternator (65A/70A), air filter & flywheel

Heat exchange fuel system

Heat exchange fuel injection system

Standard feet & speed control bracketry

Alternator (100 Amp), 6K drive & Beta Controller

Wiring harness and switches

2a Simple panel & components

2ab panel & components

2ab’V’ panel & components

2ab’V’W panel & components

2b SFIA panel & components

2c Deluxe panel & components

Panel gauges & senders

Various electrical & panel parts and components

Expansion water bottle and spare parts

Fitting calorifier connections (from March 2011 spec)

Tubestack alignment and cleaning (from March 2011 spec)

Installation kits / Spares kits

BETA MARINE LTD, UNIT 2 DAVY WAY, WATERWELLS, QUEDGELEY, GLOS. GL2 2AD UNITED KINGDOM TEL: (01452) 723492 INT. TEL: 44 1452 723492 FAX: (01452) 729916 WEB SITE: www.betamarine.co.uk EMAIL: spares@betamarine.co.uk

FOR ENGINES BUILT BEFORE 2011

FOR ENGINES BUILT FROM JANUARY 2012 Beta43, Beta50 & Beta60 ILLUSTRATED QUICK REFERANCE PARTS LIST –FRONT VIEW

Air filter element: 211-09179 From Jan 2014 (Plastic body) 211-08133 From Dec2011 – Dec2013 (Steel body)

Pressure cap: 209-80130 Thermostat: 600-05289 (Gasket: 600-80490) Extended dipstick: 600-96320 Extended dipstick guide: 600-96320/01 Alternator: 70 Amp: 200-01155 V Belt: 214-80750 120 Amp: 200-08183 6K belt: 214-07037 175 Amp: 200-05261 6K belt: 214-04776

Sea water pump: 207-10708 From Jan2017 207-08923 June2013-end 2016 207-07415 To June 2013 Impeller: 207-09042-KIT Fuel lift pump: 600-80870 (Gasket: 600-00538) Water drain tap: 600-00621

Fuel solenoid: 600-02244 (Coupler: 600-07330) Oil filter: 211-70510/02

FOR ENGINES BUILT BEFORE 2011

FOR ENGINES BUILT FROM JANUARY 2012 Beta43, Beta50 & Beta60 ILLUSTRATED QUICK REFERANCE PARTS LIST –PORT VIEW

O Rings: 212-07273 (3 bolt) Zinc: 209-61840 Exhaust gasket: 212-09070

70A alternator arm: 202-96260

Fresh water pipe: 209-94520

Fuse: 200-00959 Engine harness: 200-05267 Calorifier: AK/HE/CAL/003 Starter: BV2003: 600-07408 BV2203: 600-00540 BV2403: 600-07064

Exhaust elbow: 202-90610 Saddle: 212-99241/01 Clevis: 212-07665 Ball joint: 212-99240/01 (Note ball joint not shown, suits hydraulic gearboxes)

FOR ENGINES BUILT FROM JANUARY 2012 Beta43, Beta50 & Beta60 ILLUSTRATED QUICK REFERANCE PARTS LIST –STARBOARD VIEW

Sump drain pump: 210-80061 (Clamp 212-00793)

GEARBOX OPTIONS TMC 60 R2 TMC 60 R2.5 TMC 260 R2 TMC 260 R2.5 TMC 260 R3 TM 345A R2 ZF15 MIV 2.13:1 ZF 25M R2 ZF 25H R2 ZF 25H R2.8 ZF 25HA R2 ZF 25HA R2.29 ZF 25HA R2.71 PRM 150 D2 PRM 150 D3 PRM 280 D2 PRM 280 D3 PRM 500 D2.5

GEARBOX P/No 204-91680 204-01627 204-02134 204-03336 204-05312 204-03053 204-00767 204-91660 204-98890 204-01191 204-00743 204-02880 204-01148 204-91920 204-91700 204-10398 204-10436 254-94834

Fuel filter: 211-60210 Sea water pipe: 202-08795 Flexible mounts: 213-96970/01

DAMPER P/No

MORSE GEAR BRACKET P/No

ADAPTOR PLATE P/No

FLEXIBLE COUPLING

202-05129

205-60990

212-01430

206-03335 206-00895 206-01682

202-61582

N/A 205-60990

212-01248 ASK

206-05185

202-05406

206-07584

202-94100

206-91950 206-02094/01

206-02095 206-04811

202-80560

205-85810 212-01430

205-60990 205-72820

212-01248

255-02598

212-02699

FOR ENGINES BUILT BEFORE END 2011

Beta43, Beta50 & Beta60 ILLUSTRATED QUICK REFERANCE PARTS LIST –FRONT VIEW

Air filter element: 211-61831 to Dec2010, 211-08133 From Dec2011

Pressure cap: 209-80130 Extended dipstick: 600-96320 Thermostat: 600-72450 (Gasket: 600-80490) Alternator: 65Amp: 200-01155 V Belt: (All –from April2011) 214-80750

Sub loom: 200-01196 100Amp: 200-03008 6K Belt: (All fromOct2009) 214-07037

Sea water pump: 207-07415 (Johnson from Sept 2009) (Impeller: Johnson 207-07559)

Water drain tap: 600-00621

Fuel lift pump: Beta43: 600-80870 Beta50 to July 2007: 600-00633 Beta50 from July 2007: 600-80870 Beta60: 600-80870

Oil filter: 211-70510/02 Fuel solenoid All –July 2007 & Beta43 to Sept 2008: 600-71670 (side mounted) Beta50 Energise to Run From July2007-JULY2008 & Beta60: 600-06964 Beta43 From Sept 2008, Energise to Stop: 600-02244 (coupler 600-07330) Beta50 From July2008, Energise to Stop: 600-02244 (coupler 600-07330) Beta60 To Nov2009, Energise to Run: 600-06964 (coupler 600-06793) Beta60 From Nov2009, Energise to Stop: 600-02244 (coupler 600-07330)

FOR ENGINES BUILT BEFORE END 2011 Beta43, Beta50 & Beta60 ILLUSTRATED QUICK REFERANCE PARTS LIST –PORT VIEW

O Rings: 209-80110 (1 BOLT) O Rings: 212-07273 (3 BOLT) Zinc: 209-61840 Exhaust Gasket: 212-09070 Fresh water pipe: 209-94520 Fuse: 200-00959 Engine harness: 200-05267 Calorifier: AK/HE/CAL/003 (FROM SEPT2010) Starter: BV1903: 600-00540 BV2003: 600-07408 Beta50: 600-00540 Beta60: 600-07064 Exhaust elbow: 202-90610 Saddle: 212-99241/01 Ball joint: 212-99240/01

FOR ENGINES BUILT BEFORE END 2011

Beta43, Beta50 & Beta60 ILLUSTRATED QUICK REF. PARTS LIST –STARBOARD VIEW

Fuel filter: 211-60210

Sump drain pump: 210-80061 (Clamp: 212-00793)

Flexible mounts: Beta43 (not if fitted with PRM260) 45 Shore: 213-85900/02 Beta43 (if fitted with PRM260) 55 Shore: 213-96970/01 Beta 50 & Beta60: 55 Shore: 213-96970/01

GEARBOX OPTIONS TMC 60 R2 TMC 60 R2.5 TMC 260 R2 TMC 260 R2.5 TMC 260 R3 TM 345A R2 ZF 12M R2 ZF 15M R2 ZF 15MA R2 ZF15 MIV 2.13:1 ZF 25M R2 ZF 25H R2 ZF 25H R2.8 ZF 25HA R2 ZF 25HA R2.29 ZF 25HA R2.71 PRM 150 D2 PRM 150 D3 PRM 280 D2 PRM 280 D3 PRM 500 D2.5

GEARBOX P/No 204-91680 204-01627 204-02134 204-03336 204-05312 204-03053 204-85860 204-85870 204-85875 204-00767 204-91660 204-98890 204-01191 204-00743 204-02880 204-01148 204-91920 204-91700 204-10398 204-10436 254-94834

DAMPER P/No

MORSE GEAR BRACKET P/No

ADAPTOR PLATE P/No

FLEXIBLE COUPLING

202-05129

205-60990

212-01430

N/A

212-01248

206-91950 206-02094/01 206-03335 206-00895 206-91950

202-61582

205-60990

206-00895 206-01682

ASK

206-05185

202-05406

206-07584

202-94100

206-02095 206-04811

212-01430

202-80560

205-85810 212-01430

205-60990 205-72820

212-01248

255-02598

212-02699

Heat exchanger header tank manifold fixings (2011 Spec 3 Bolt Manifold only)

010

020

030 040 050 060

070 Ref No 010 020 030 040 050 060 070 080

Part Number AK/S3/4CYL/E01 212-02412 600-72880 201-71380/01 202-08618 217-99293 212-08629 217-99296

080 Part Name SUPER3 SERIES 4 CYLINDER ESKIMO MANIFOLD KIT HEAT EXCHANGER COOLED (Includes 050 & 070) 28mm x ¾”BSP HOSE TAIL CONNECTOR EXHAUST MANIFOLD GASKET SUPER 3 MANIFOLD STUD EXHAUST MANIFOLD SPACER PLATE M8 FLAT WASHER EXHAUST SPACER GASKET M8 NYLOC

Quantity 1 1 1 8 4 8 4 8

Heat exchange manifold (2011 Spec 3 Bolt Manifold only)

010

020

070 Ref No 010 020 030 040 050

Part Number 209-02167/01 209-02323 209-08352 AK/S3/4CYL/E01

070 080

212-98464 209-05125/01 209-91760 212-02412 202-90610

090 100 110 120 130

212-09070 217-99293 217-99292 217-99299 212-98464

060

030

040

080

050

090

100

060

110 120

Part Name FILLER NECK ‘O’ RING TWIN SEAL PRESSURE CAP FILLER NECK ASSEMBLY SUPER3 SERIES 4 CYLINDER ESKIMO MANIFOLD KIT HEAT EXCHANGER COOLED (Includes 010,02, 030 & 090) STAINLESS STEEL HOSE CLIP 22-30mm 25mm I/D RUBBER ELBOW –From June 2013 22mm I/D RUBBER ELBOW –To June 2013 28mm x ¾”BSP HOSE TAIL CONNECTOR 2” O/D STAINLESS STEEL EXHAUST ELBOW (Note suits 25mm water hose from June 2013) EXHAUST GASKET 2” (ORANGE TYPE FROM MAY 2011) M8 FLAT WASHER M8 SPRING WASHER M8 x 25mm SET STAINLESS STEEL HOSE CLIP 22-30mm

130 Quantity 1 1 1 1 1 1 1 1 1 4 4 4 1

Heat exchange tubestack (2011 Spec 3 Bolt Manifold only)

010

Ref No 010 020 030 040 050 060 070

Part Number 208-07272 217-00190Z 212-07273 209-08543 208-07271 209-61840 212-08730/55

020

030

040

050

Part Name HEAT EXCHANGE RETURN ENDCAP 2011 SPEC HEAT EXCHANGE END CAP BOLT 2011 SPEC NITRILE ‘O’ RING FOR TUBESTACK 2011 SPEC Beta43 / Beta50 / Beta60 TUBESTACK 2011 SPEC 25mm GUNMETAL HEADER, LESS ANODE, 2011 SPEC ZINC ANODE SEAL, 55mm OAL, TO SUIT 050 ENDCAP 2011 SPEC

060

Quantity 1 6 2 1 1 1 1

070

Keel cooled header tank manifold fixings (2011 Spec 3 Bolt Manifold only)

010

020

030 040 050 060

070 Ref No 010 020 030 040 050 060 070 080

Part Number AK/S3/4CYLKS/E01 212-02412 600-72880 201-71380/01 202-08618 217-99293 212-08629 217-99296

080 Part Name SUPER3 SERIES 4 CYLINDER ESKIMO MANIFOLD KIT KEEL COOLED (Includes 050 & 070) 28mm x ¾”BSP HOSE TAIL CONNECTOR EXHAUST MANIFOLD GASKET SUPER 3 MANIFOLD STUD EXHAUST MANIFOLD SPACER PLATE M8 FLAT WASHER EXHAUST SPACER GASKET M8 NYLOC

Quantity

1 1 1 8 4 8 4 8

Keel cooled manifold (2011 Spec 3 Bolt Manifold only)

010

020

080 Ref No 010 020 030

Part Number 209-02167/01 209-02323 209-08352

040

AK/S3/4CYLKS/E01

050 060 070 080 090 100 110 120 130

212-10468 202-08429 217-00190Z 212-02412 212-09070 AK/MINIK/EX/1502 217-99293 217-99292 217-99299

030

040

050

090

100

060

110

120

Part Name FILLER NECK ‘O’ RING TWIN SEAL PRESSURE CAP FILLER NECK ASSEMBLY SUPER3 SERIES 4 CYLINDER KEEL COOLED MANIFOLD KIT (Includes 010, 020, 030, 050, 060, 070 & 090) ‘O’ RING FOR KEEL COOLED MANIFOLD 2011 SPEC KEEL COOLED MANIFOLD ENDCAP 2011 SPEC END CAP BOLT 2011 SPEC 28mm x ¾”BSP HOSE TAIL CONNECTOR EXHAUST GASKET 2” (ORANGE TYPE FROM MAY 2011) 1 ½”BSP EXHAUST FLANGE ASSEMBLY M8 FLAT WASHER M8 SPRING WASHER M8 x 25mm SET

070

130 Quantity 1 1 1

1 1 1 3 1 1 1 4 4 4

Prices and specifications are subject to amendment without notice. Information given is subject to our current conditions of tender and sale. In all cases please quote Beta Marine WOC â&#x20AC;&#x2DC;Kâ&#x20AC;&#x2122; number and Engine Type. Beta Marine will not be held responsible for incorrect supply without this information.

DRAWING 100-05301 (PAGE 1 of 5)

Prices and specifications are subject to amendment without notice. Information given is subject to our current conditions of tender and sale. In all cases please quote Beta Marine WOC â&#x20AC;&#x2DC;Kâ&#x20AC;&#x2122; number and Engine Type. Beta Marine will not be held responsible for incorrect supply without this information.

DRAWING 100-05301 Beta43, Beta50 & Beta60 WATER SYSTEM (PAGE 1 of 5) Ref No 01 02 03 04 05 06 07 08 09 10 11 12 13

Part Number 217-99304 217-99292 217-99293 212-99403 209-90290 209-07643 600-80490 600-72450 600-05289 212-00066 218-99262 212-00066 201-71380/01 217-99293 217-99296 209-01925

14 AK/S3/4CYL/E01 15 16 17 18 19 20 21 22

N/A 212-08629 N/A 202-08618 600-72880 212-01480 200-01133 600-62820 200-91980 200-94360 212-99233 212-04626

23 212-01480 24

200-01133 600-62820 201-03202

25 200-91980 26

200-94360 212-05076

209-80050 600-02060

Part Name M8 x 60 mm SET M8 SPRING WASHER M8 FLAT WASHER 3/8”BSP GALVANISED PLUG SUPER 3 SERIES THERMOSTAT HOUSING –MAR2011 SUPER 3 THERMOSTAT HOUSING –FROM MARCH 2011 SUPER 3 SERIES THERMOSTAT GASKET S3 SERIES THERMOSTAT (ENGINES WITH SIDE MOUNTED FUEL STOP SOLENOID ONLY) S3 SERIES THERMOSTAT (ENGINES WITH FRONT MOUNTED FUEL STOP SOLENOID ONLY) S/S HOSE CLIP 30-40mm 28mm I/D SILICON HOSE S/S HOSE CLIP 30-40mm SUPER 3 MANIFOLD STUD M8 FLAT WASHER M8 NYLOC SUPER 3 SERIES 4 CYLINDER HEAT EXCHANGER (INCLUDES 15 & 16) SUPER 3 SERIES 4 CYLINDER HEAT EXCHANGER – FROM MAR2011 HEAT EXCHANGER GASKET –TO MAR11 SEE 14 HEAT EXCHANGER EXHAUST GASKET –FROM MAR11 HEAT EXCHANGER SPACER PLATE –TO MAR11 SEE 14 EXHAUST GASKET SPACER PLATE –FROM MAR2011 EXHAUST MANIFOLD GASKET WATER TEMPERATURE SWITCH ADAPTOR WATER TEMPERATURE SWITCH –TO OCT 2008 WATER TEMPERATURE SWITCH –FROM NOV 2008 TEMPERTATURE SENDER ADAPTOR WATER TEMPERATURE SENDER (DELUXE PANEL) 3/8”BSP x 5/8 HOSE CONNECTOR ADAPTOR 1/2"BSPTM x 1/8"BSPF –Beta43 to Sept2008, Beta50 to July2007 ADAPTOR 3/8BSPTMx1/8BSPF GALV –Beta43 from Sept2008, Beta50 from July2007, Beta60 WATER TEMP SWITCH –TO Nov2008 WATER TEMP SWITCH –FROM Nov2008 ADAPTOR, 1/2"BSPM x 5/8"UNFF –Beta43 to Sept2008, Beta50 to July2007 ADAPTOR, 3/8BSPTMx1/8BSPF GALV –Beta43 from Sept2008, Beta50 from July2007, Beta60 WATER TEMPERATURE SENDER (DELUXE PANEL) M12 FINE PLUG, Beta50 fromJuly2007 – July 2008, Beta60 3/8BSP PLUG, Beta43 from Sept2008 3/8BSP PLUG, Beta50 from July2007 – July2008 3/8BSP PLUG, Beta50 from July2008 3/8BSP PLUG, Beta60 ½”BSP PLUG, Beta43 to Sept2008, Beta50 to July2007

Quantity 2 2 2 1 1 1 1 1 0.7 1 8 8 8 1 0 4 0 4 4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 2 2 1

For latest calorifier fitting –see page 72 (all engines from September 2010) Prices and specifications are subject to amendment without notice. Information given is subject to our current conditions of tender and sale. In all cases please quote Beta Marine WOC ‘K’ number and Engine Type. Beta Marine will not be held responsible for incorrect supply without this information.

DRAWING 100-05301 (PAGE 2 of 5)

Prices and specifications are subject to amendment without notice. Information given is subject to our current conditions of tender and sale. In all cases please quote Beta Marine WOC â&#x20AC;&#x2DC;Kâ&#x20AC;&#x2122; number and Engine Type. Beta Marine will not be held responsible for incorrect supply without this information.

DRAWING 100-05301 Beta43, Beta50 & Beta60 WATER SYSTEM (PAGE 2 of 5) Ref No 01 02 03 04 05 06 07 08 09 10 11

Part Number 209-94520 212-00066 212-00066 212-99403 212-99237 212-99233 209-61840 209-00017 209-00016 217-00190Z 209-80440 208-07271 209-80110 212-07273 209-85840 209-04662 209-08543

13 14 15 16 17 18 19 20

209-02167 217-99275 217-00052 217-06947 209-80130 209-02323 209-80110 212-07273 209-80100/01 208-07272 209-00017 209-00016 217-00190Z

Part Name SUPER 3 SERIES SILICON FRESH WATER PIPE STAINLESS STEEL HOSE CLIP 30-40mm STAINLESS STEEL HOSE CLIP 30-40mm 3/8”BSP GALVANISED PLUG 3/8”BSPTM x 3/8"BSPF 90º ELBOW 3/8”BSP x 5/8 HOSE CONNECTOR ZINC ANODE M8 BONDED SEAL (SINGLE BOLT TUBESTACK ONLY) M8 PHOSPHUR BRONZE BOLT M8 x 1 x 45mm SOCKET CAP HEAD 22mm GUNMETAL HEADER 22mm GUNMETAL HEADER –SUITS ANODE NITRILE ‘O’ RING –TUBESTACK (SINGLE BOLT TYPE) NITRILE ‘O’ RING –TUBESTACK (3 BOLT TYPE) SUPER 3 SERIES 4 CYLINDER H/E TUBESTACK –TO MARCH 2011 (SINGLE BOLT) SUPER 3 SERIES 4 CYL H/E SPECIAL HOT CLIMATE TUBESTACK –TO MARCH 2011 (SINGLE BOLT) SUPER 3 SERIES 4 CYLINDER H/E TUBESTACK –FROM MARCH 2011 (3 BOLT TYPE) FILLER NECK ASSEMBLY & ‘O’ RING M6 SPRING WASHER M6 NUT M6 x 20mm SOCKET BUTTON SCREW (EARLY MODELS) 95kPa PRESSURE CAP (NOT USA) 13PSI PRESSURE CAP (USA ONLY) & ALL 3 BOLT TYPE NITRILE ‘O’ RING –TUBESTACK (SINGLE BOLT TYPE) NITRILE ‘O’ RING –TUBESTACK (3 BOLT TYPE) HEAT EXCHANGE RETURN ENDCAP (1 BOLT TYPE) HEAT EXCHANGE RETURN ENDCAP (3 BOLT TYPE) M8 BONDED SEAL (SINGLE BOLT TUBESTACK ONLY) M8 PHOSPHUR BRONZE BOLT M8 x 1 x 45mm SOCKET CAP HEAD

Quantity 1 1 1 1 1 1 1 1 1 3

1 1

1 2 2 1 1 1 1 1 3

Beta43, Beta50 & Beta60 WATER SYSTEM –SEA WATER PIPES FROM JUNE 2013

010 Ref No 010 020 030 040 050 060 070 080 090 100 110

Part Number 202-08795 212-02808 212-98464 209-91760 212-98464 209-05125/01 202-90610 212-09070 217-99292 217-99299 217-99293

020

030

040

Part Name RAW WATER PIPE RAW WATER PIPE CLIP STAINLESS STEEL HOSE CLIP 22-30mm 22mm RUBBER ELBOW STAINLESS STEEL HOSE CLIP 22-30mm 25mm RUBBER ELBOW 2"x22mm WATER INJECTION BEND EXHAUST GASKET 2” (ORANGE TYPE FROM MAY 2011) M8 SPRING WASHER M8 x 25mm SET M8 FLAT WASHER

Quantity 1 1 3 1 2 1 1 1 4 4 4

050 060 070 080 090 100 110

Beta43/ 50 / 60 WATER SYSTEM –RAW WATER PUMP FROM JUNE 2013

010

020

Ref No 010

030

Part Number 212-99239 212-06534 212-02412 207-08923 207-10708

040 050 060

209-10719 202-08924/02 207-09042-KIT

020

030

040

050

Part Name ¾”BSPM x 25mm HOSE CONNECTOR ¾”BSPM x 22mm HOSE CONNECTOR ¾”BSPM x 28mm HOSE CONNECTOR (FOR TMC260 ONLY) BETA MARINE SEA WATER PUMP (JUNE2013-DEC2016) BETA MARINE SEA WATER PUMP –FROM JANUARY 2017 & ‘BLUE SPOT PUMPS’ SEA WATER PUMP ‘O’ RING (ENGINE TO PUMP) SEA WATER PUMP CLAMP SEA WATER PUMP IMPELLER KIT (ALL FROM SEPT 2009) INCLUDES: JOHNSON PUMP PAPER GASKET 207-09470 & BETA PUMP ‘O’ RING 207-09280

Quantity 1 1 1 1 1 1

060

Beta43/ 50 / 60 –RAW WATER PUMP REPAIR KITS FROM JAN 2017

010 020

030 040

050 060

070

080

Ref No 010 020 030 040 050 060 070 080

Part Number 207-10665 207-09910 207-10505 207-09230 221-09652 207-10664 210-10646 207-10506

Part Name SHAFT KIT (ALSO SUITS ALL BLUE SPOT PUMPS) WEAR KIT (ALSO SUITS ALL BLUE SPOT PUMPS) MECHANICAL SEAL (ALSO SUITS ALL BLUE SPOT PUMPS) SEAL KIT –SUITS SEAL RETAINING RING FITTING TOOL COVER PLATE LIP SEAL (ALSO SUITS ALL BLUE SPOT PUMPS) CIRCLIP (ALSO SUITS ALL BLUE SPOT PUMPS)

Quantity 1 1 1 1 1 1 1 1

Prices and specifications are subject to amendment without notice. Information given is subject to our current conditions of tender and sale. In all cases please quote Beta Marine WOC â&#x20AC;&#x2DC;Kâ&#x20AC;&#x2122; number and Engine Type. Beta Marine will not be held responsible for incorrect supply without this information.

DRAWING 100-05301 (PAGE 3 of 5)

Prices and specifications are subject to amendment without notice. Information given is subject to our current conditions of tender and sale. In all cases please quote Beta Marine WOC â&#x20AC;&#x2DC;Kâ&#x20AC;&#x2122; number and Engine Type. Beta Marine will not be held responsible for incorrect supply without this information.

DRAWING 100-05301 Beta43, Beta50 & Beta60 WATER SYSTEM –ENGINE BUILT BEFORE JUNE 2013 (PAGE 3 of 5) Ref No 01

Part Number 207-80780 207-07415

04 05 06 07 08

207-10708 217-99289 201-63120 600-00866 217-99281 217-99275 217-99276 218-99251 212-00066

209-03203

10 11

212-02808 600-62620 202-90610 202-92400/22 217-99293 217-99292 217-99299 212-98464 209-91760 212-98464 212-98466 218-99249 212-98464 600-00621 217-99321 217-99335

02 03

12 13 14 15 16 17 18 19 20 21 22 23 24 Ref No 1A 1B 1C 1D 1E 1F 1G 1H NA NA Ref No NA NA NA

Part Number 207-80780 207-01323 207-01250 207-80810 207-80800 207-00062 207-00138 207-62600/01 207-06377 207-80780/SHAFT Part Number 207-07415 207-07559 207-07560

Part Name SUPER 3 JABSCO SEA WATER PUMP –TO SEPT 2009 S3 JOHNSON SEA WATER PUMP –FROM SEPT 2009 TO JUNE 2013 BETA TYPE SEA WATER PUMP –FROM JUNE 2013 M6 x 20mm SOCKET CAP SCREW SUPER 3 SEA WATER PUMP ADAPTOR RING GASKET FOR 201-63120 M6 x 20mm SET M6 SPRING WASHER M6 FLAT WASHER 1 1/8" I/D BLACK RADIATOR HOSE STAINLESS STEEL HOSE CLIP 30-40mm SUPER 3, 4 CYLINDER RAW WATER COOLING PIPE (MECHANICAL GEARBOX ONLY, NO OIL COOLER) PIPE FITTING CLIP (No4) GASKET, 2” EXHAUST 2"O/D WATER INJECTION BEND 5” HIGH RISE x 2"O/D WATER INJECTION BEND M8 FLAT WASHER M8 SPRING WASHER M8 x 25mm SET STAINLESS STEEL HOSE CLIP 22-30mm 22mm DIAMETER 90 ELBOW STAINLESS STEEL HOSE CLIP 22-30mm STAINLESS STEEL HOSE CLIP 25-35mm 7/8" I/D BLACK RADIATOR HOSE STAINLESS STEEL HOSE CLIP 22-30mm SUPER 3 SERIES WATER DRAIN TAP M10 FLAT WASHER M10 x 25mm FINE SOCKET CAP SCREW Part Name SUPER 3 SERIES SEA WATER PUMP –TO SEPT 2009 SCREW, SUPER 3 SERIES JABSCO PUMP CAM CAM, SUPER 3 SERIES JABSCO PUMP SERVICE KIT, INCLUDES 1E, 1F, 1H IMPELLER, SUPER 3 SERIES JABSCO PUMP SCREW, JABSCO PUMP ENDCOVER PLATE PLATE, JABSCO PUMP BRASS ENDCOVER GASKET, JABSCO PUMP ENDCOVER PLATE OIL SEAL, JABSCO PUMP SHAFT TO SUIT S3 JABSCO PUMP Part Name S3 JOHNSON SEA WATER PUMP –FROM SEPT 2009 JOHNSON SEA WATER PUMP IMPELLER KIT JOHNSON SEA WATER PUMP SERVICE KIT

Quantity 1 4 1 1 4 4 4 0.06m 2 1 1 1 1 1 4 4 4 1 1 1 1 0.06m 1 1 1 1 Quantity 1 1 1 1 1 6 1 1 1 1 Quantity 1 1 1

DRAWING 100-05301 (PAGE 4 of 5)

Prices and specifications are subject to amendment without notice. Information given is subject to our current conditions of tender and sale. In all cases please quote Beta Marine WOC â&#x20AC;&#x2DC;Kâ&#x20AC;&#x2122; number and Engine Type. Beta Marine will not be held responsible for incorrect supply without this information.

DRAWING 100-05301 Beta43, Beta50 & Beta60 WATER SYSTEM FOR HYDRAULIC GEARBOXES (PAGE 4 of 5) Ref No 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19

Part Number 202-02860 217-99341 217-99342 217-99351 210-91630 212-00117 210-00171 212-98464 210-00172 212-00117 212-99379 212-99383 212-01544 210-92260 212-06547 217-99292 217-99301 217-99293 212-02808 212-98464 209-03204

20 202-08795 21 22 23 24

217-99335 217-99321 217-99293 217-99296

Part Name SUPER 3 SERIES H/E DC60 OIL COOLER BRACKET M12 FLAT WASHER M12 SPRING WASHER M12 x 30 x 1.25mm SET OIL COOLER DC60-YDA (INC 06, 07, 09, 10) STAINLESS STEEL HOSE CLIP 45-60mm ENDCAP 22mm STRAIGHT OUTLET STAINLESS STEEL HOSE CLIP 22-30mm ENDCAP 22mm 90o INLET STAINLESS STEEL HOSE CLIP 45-60mm 1/2"BSP COPPER WASHER ½”BSP x 3/8”BSP M-M ADAPTOR RUBBER STRIP 3mm T x 25mm W x 80mm L OIL COOLER CLAMP (TO AUGUST 2007 OIL COOLER CLAMP (FROM AUGUST 2007) M8 SPRING WASHER M8 x 35mm SET M8 FLAT WASHER PIPE FITTING CLIP (No4) STAINLESS STEEL HOSE CLIP 22-30mm SUPER 3, 4 CYLINDER RAW WATER COOLING PIPE –DC60 OIL COOLER (HYDRAULIC GEARBOX) SUPER 3, 4 CYLINDER RAW WATER COOLING PIPE –DC60 OIL COOLER (HYDRAULIC GEARBOX) M10 x 25mm FINE SOCKET CAP SCREW M10 FLAT WASHER M8 FLAT WASHER M8 NYLOC

Quantity 1 2 2 2 1 1 1 1 1 1 2 2 2 1 2 2 2 2 1 1 1 1 1 2 2

DRAWING 100-05301 (PAGE 5 of 5)

Prices and specifications are subject to amendment without notice. Information given is subject to our current conditions of tender and sale. In all cases please quote Beta Marine WOC â&#x20AC;&#x2DC;Kâ&#x20AC;&#x2122; number and Engine Type. Beta Marine will not be held responsible for incorrect supply without this information.

DRAWING 100-05301 Beta50 WATER SYSTEM, HBW150 WATER COOLED GEARBOX –TO JUNE 2013 (PAGE 5 of 5) Ref No 01 02 03

Part Number 212-00066 218-99251 212-00066

209-03177

05 06 07 08 09 10 11 12 13 14 15 16 17

217-99293 217-99296 217-99295 217-99292 217-99293 202-03215 212-02808 217-99293 217-99299 212-00066 209-91770 212-00066 210-00089

Part Name STAINLESS STEEL HOSE CLIP 30-40mm 1 1/8" I/D BLACK RADIATOR HOSE STAINLESS STEEL HOSE CLIP 30-40mm Beta50 RAW WATER COOLING PIPE –HBW 150 OIL COOLER (MECHANICAL GEARBOX) M8 FLAT WASHER M8 NYLOC M8 FULL NUT M8 SPRING WASHER M8 FLAT WASHER RAW WATER PIPE BRACKET, Beta50 –HBW150 PIPE CLAMP M8 FLAT WASHER M8 x 25mm SET STAINLESS STEEL HOSE CLIP 30-40mm 28mm I/D ELBOW, BLACK RADIATOR HOSE STAINLESS STEEL HOSE CLIP 30-40mm OIL COOLER –HBW150 GEARBOX

Quantity 2 0.06m 2 1 2 2 2 2 2 2 2 2 2 1 1 1 1

DRAWING 100-05302 (PAGE 1 of 5)

Prices and specifications are subject to amendment without notice. Information given is subject to our current conditions of tender and sale. In all cases please quote Beta Marine WOC â&#x20AC;&#x2DC;Kâ&#x20AC;&#x2122; number and Engine Type. Beta Marine will not be held responsible for incorrect supply without this information.

DRAWING 100-05302 Beta43, Beta50 & Beta60 HURTH HSW250 / ZF25H GEARBOX ASSEMBLY (PAGE 1 of 5) Ref No 01 02 03 04 05 06

Part Name 3/8UNC x 1” SET 3/8UNC SPRING WASHER GEARBOX MORSE CABLE CLAMP GEARBOX MORSE CABLE BALL JOINT HSW250 / ZF25H MORSE GEAR BRACKET 3/8”BSPT x 3/8”BSP M-M ADAPTOR HURTH HSW250 R1.97 / ZF25H R1.97 HURTH HSW250 R2.8 / ZF25H R2.8 HURTH HSW250 ‘A’ R1.93 / ZF25H ‘A’ R1.93 HURTH HSW250 ‘A’ R2.71 / ZF25H ‘A’ R2.71 HYDRAULIC OIL PIPE 3/8"BSP 450mm 90o-ST HYDRAULIC OIL PIPE 3/8"BSP 450mm 90 o-ST M10 x 30mm SET (TOP) M10 x 25mm SET (BOTTOM) M10 SPRING WASHER M10 FLAT WASHER SUPER 3 –HSW250 SUMP DRAIN PUMP BRACKET HURTH HSW250 / ZF25H - B/W ADAPTOR M10 SPRING WASHER (NOT ON BOTTOM BOLTS) M10 x 25mm SET M10 FLAT WASHER M10 x 40 x 1.25mm SET M10 SPRING WASHER M10 FLAT WASHER Beta43 / Beta50 FLYWHEEL HOUSING Beta60 FLYWHEEL HOUSING DOWEL 10mm DIAMETER x 20mm OAL M8 x 25mm SOCKET CAP SCREW M8 FLAT WASHER DS22 DAMPER, SAE 6.5 -TO JULY 2006 VULCAN DAMPER, MACHINED TO SAE 6.5 -FROM JULY 2006 M12 x 20mm SOCKET CAP SCREW Beta43/50– DS22 INERTIA RING SAE6.5 (TO JULY 2006) Beta43/50 STD INERTIA RING SAE6.5 (FROM JULY 2006) Beta60 INERTIA RING FLEXIBLE COUPLING

Quantity 2 2 1 1 1 2

Part Number 217-99360 217-99359 212-99241/01 212-99240/01 202-05406 212-01018 204-98890 204-01191 204-00743 204-01148 210-94220 210-94220 217-99326 217-99325 217-99320 217-99321 202-97590 205-85810 217-99320 217-99325 217-99321 217-99330 217-99320 217-99321 208-62300 208-62300 217-99339 217-99311 217-99293 206-97790 206-05185 217-99349 201-01630 201-90330 201-07145 212-01430

Ref No A B C D E

Part Number N/A 217-99320 N/A 217-02760 217-99321

Part Name SEE 13 ABOVE M10 SPRING WASHER SEE 10 ABOVE M10 x 100 x 1.25mm SET M10 FLAT WASHER

Quantity 1 2 1 1 8

07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

1 1 1 3 4 7 7 1 1 4 6 6 6 6 6 1 2 6 6 1 6 1 1

DRAWING 100-05302 (PAGE 2 of 5)

Prices and specifications are subject to amendment without notice. Information given is subject to our current conditions of tender and sale. In all cases please quote Beta Marine WOC â&#x20AC;&#x2DC;Kâ&#x20AC;&#x2122; number and Engine Type. Beta Marine will not be held responsible for incorrect supply without this information.

DRAWING 100-05302 Beta43 / Beta50 NEWAGE PRM 150 GEARBOX ASSEMBLY (PAGE 2 of 5) Ref No 01 02

Part Name SUPER 3 – DS15 INERTIA RING SAE 6.5 M12 x 30mm SOCKET CAP SCREW PRM150 DS15 DRIVEPLATE SAE6.5 –TO FEB 2004 PRM150 DS15 DRIVEPLATE FROM FEB 2004-DEC09 PRM150 43-AG-60 DAMPER FROM DEC2009 M8 FLAT WASHER DOWEL 10mm DIAMETER x 20mm OAL M8 x 25mm SET –TO DEC 2009 M8 x 20mm SET –FROM DEC 2009 M10 FLAT WASHER M8 x 25mm SOCKET CAP SCREW M10 SPRING WASHER M10 x 40 x 1.25mm SET M8 SPRING WASHER M8 FLAT WASHER PRM80 / PRM120 –BORG WARNER ADAPTOR SUPER 3 –PRM150 SUMP DRAIN PUMP BRACKET M10 FLAT WASHER M10 SPRING WASHER M10 x 30mm SET (TOP) M10 x 25mm SET (BOTTOM) 1/4”BSPT x 3/8”BSP M-M 90o ADAPTOR GEARBOX MORSE CABLE BALL JOINT NEWAGE PRM 150D2 GEARBOX NEWAGE PRM 150D3 GEARBOX (NOT Beta50 / 60) FLEXIBLE COUPLING 1/4”BSPT x 3/8”BSP M-M 90o ADAPTOR M8 SPRING WASHER M8 x 30mm SET GEARBOX MORSE CABLE CLAMP HYDRAULIC OIL PIPE 3/8"BSP 450mm 90o-ST HYDRAULIC OIL PIPE 3/8"BSP 450mm 90o-ST PRM150 MORSE GEAR BRACKET Beta43 / Beta50 FLYWHEEL HOUSING

Quantity 1 6

21 22 23 24 25 26 27 28 29

Part Number 201-90330 217-01237 206-02094 206-03981 206-07584 217-99293 217-99339 217-99299 217-99298 217-99321 217-99311 217-99320 217-99330 217-99292 217-99293 205-92480 202-97590 217-99321 217-99320 217-99326 217-99325 210-91940 212-99240/01 204-91920 204-91700 212-01430 210-91940 217-99292 217-99301 212-99241/01 210-94220 210-94220 202-94100 208-62300

Ref No A B C D E

Part Number N/A 217-99320 N/A 217-02760 217-99321

Part Name SEE 14 ABOVE M10 SPRING WASHER SEE 17 ABOVE M10 x 100 x 1.25mm SET M10 FLAT WASHER

Quantity 1 2 1 1 8

03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20

1 6 2 6 6 6 6 6 6 6 1 1 7 7 3 4 1 1 1 1 1 2 2 1 1 1 1 1

DRAWING 100-05302 (PAGE 3 of 5)

Prices and specifications are subject to amendment without notice. Information given is subject to our current conditions of tender and sale. In all cases please quote Beta Marine WOC â&#x20AC;&#x2DC;Kâ&#x20AC;&#x2122; number and Engine Type. Beta Marine will not be held responsible for incorrect supply without this information.

DRAWING 100-05302 Beta43 & Beta50 HURTH 125 / 150 (ZF12M / ZF15M) GEARBOX ASSEMBLY (PAGE 3 of 5) Ref No 01 02 03 04

Part Name M8 NUT HURTH 50-150 (ZF5M-15M) GEAR BRACKET GEARBOX MORSE CABLE CLAMP FLEXIBLE COUPLING (NOT ‘V’ DRIVE GEARBOX) HBW125 R2 (ZF12 M R2) (BV1903 ONLY) HBW150 R2 (ZF15 M R2) HBW150 V R2 (ZF15 MIV R2) HBW150 A R2 (ZF15 MA R2) GEARBOX MORSE CABLE BALL JOINT M10 x 30mm SET (TOP) M10 x 25mm SET (BOTTOM) M10 SPRING WASHER M10 FLAT WASHER SUPER 3 –HBW125 SUMP DRAIN PUMP BRACKET HBW125 / 150 –BORG WARNER ADAPTOR M8 FLAT WASHER M8 SPRING WASHER M8 x 25mm SET M10 x 40 x 1.25mm SET M10 SPRING WASHER M10 FLAT WASHER Beta43 / Beta50 FLYWHEEL HOUSING Beta60 FLYWHEEL HOUSING M8 x 25mm SOCKET CAP SCREW M8 FLAT WASHER DRIVEPLATE 43-AC-60 (HBW125 & HBW150V) DRIVEPLATE 22-B-60 (HBW150 & 150A) M12 x 30mm SOCKET CAP SCREW SUPER 3 – DS15 INERTIA RING SAE 6.5 Beta60 INERTIA RING SAE 6.5 DOWEL 10mm DIAMETER x 20mm OAL

Quantity 2 1 1 1

Part Number 217-99295 202-61582 212-99241/01 212-01430 204-85860 204-85870 204-00767 204-85875 212-99240/01 217-99326 217-99325 217-99320 217-99321 202-97590 205-60990 217-99293 217-99292 217-99299 217-99330 217-99320 217-99321 208-62300 208-07157 217-99311 217-99293 206-00895 206-91950 217-01237 201-90330 201-07145 217-99339

Ref No A B C D E

Part Number N/A 217-99320 N/A 217-02760 217-99321

Part Name SEE 10 ABOVE M10 SPRING WASHER SEE 7 ABOVE M10 x 100 x 1.25mm SET M10 FLAT WASHER

Quantity 1 2 1 1 8

05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23

1 1 3 4 7 7 1 1 6 4 6 6 6 6 1 6 6 1 6 1 2

DRAWING 100-05302 (PAGE 4 of 5)

Prices and specifications are subject to amendment without notice. Information given is subject to our current conditions of tender and sale. In all cases please quote Beta Marine WOC â&#x20AC;&#x2DC;Kâ&#x20AC;&#x2122; number and Engine Type. Beta Marine will not be held responsible for incorrect supply without this information.

DRAWING 100-05302 Beta43, Beta50 & Beta60 NEWAGE PRM 260/280 GEARBOX ASSEMBLY (PAGE 4 of 5) Ref No

Part Number Part Name 201-90330 Beta43 / Beta50 INERTIA RING 01 201-07145 Beta60 INERTIA RING 02 206-02095 DRIVEPLATE DS15 – PRM260 SAE 6.5 03 217-01237 M12 x 30mm SOCKET CAP SCREW 04 217-99339 DOWEL 10mm DIAMETER x 20mm OAL 05 217-99293 M8 FLAT WASHER 06 217-99311 M8 x 25mm SOCKET CAP SCREW 208-62300 Beta43 / Beta50 FLYWHEEL HOUSING 07 208-07157 Beta60 FLYWHEEL HOUSING 08 217-99330 M10 x 40 x 1.25mm SET 09 217-99320 M10 SPRING WASHER 10 217-99321 M10 FLAT WASHER 11 205-72820 NEWAGE PRM 260 – BORG WARNER ADAPTOR 12 217-99323 M10 NYLOC NUT 13 201-01752 M10 STUD 14 205-02829 NEWAGE PRM 260 GEARBOX BREATHER CAP 15 202-97590 SUPER 3 –PRM260 SUMP DRAIN PUMP BRACKET 16 217-99321 M10 FLAT WASHER 17 217-99320 M10 SPRING WASHER (NOT ON BOTTOM BOLTS) 217-99326 M10 x 30mm SET (TOP) 18 217-99325 M10 x 25mm SET (BOTTOM) 19 212-99240/01 GEARBOX MORSE CABLE BALL JOINT 204-10398 NEWAGE PRM 280 D2 GEARBOX* 20 204-10436 NEWAGE PRM 280 D3 GEARBOX* 21 212-01248 FLEXIBLE COUPLING 22 212-99241/01 GEARBOX MORSE CABLE CLAMP 23 202-80560 NEWAGE PRM260 MORSE GEAR BRACKET 24 217-99292 M8 SPRING WASHER 25 217-99357 5/16 UNF x 1 ¼” SET 26 217-99358 5/16 UNF x 2 ½” SET 27 217-99292 M8 SPRING WASHER 28 209-00017 M8 DOWTY WASHER 29 212-99388 3/8”BSPT x 3/8”BSP M-M 90o ADAPTOR 30 210-94220 HYDRAULIC OIL PIPE 3/8"BSP 450mm 90o-ST 31 210-94220 HYDRAULIC OIL PIPE 3/8"BSP 450mm 90o-ST 32 212-99388 3/8”BSPT x 3/8”BSP M-M 90o ADAPTOR *NOTE: PRM260 TYPE GEARBOX WAS REPLACED WITH PRM280 MID 2016

Ref No A B C D

Part Number N/A 217-99320 N/A 201-61801

Part Name SEE 15 ABOVE M10 SPRING WASHER SEE 18 ABOVE SPACER, 18mm OAL

Quantity 1 1 6 2 6 6 1 6 6 6 1 5 5 1 1 7 4 3 4 1 1 1 1 1 1 1 1 1 2 1 1 1 1

Quantity 1 2 1 2

DRAWING 100-05302 (PAGE 5 of 5)

Prices and specifications are subject to amendment without notice. Information given is subject to our current conditions of tender and sale. In all cases please quote Beta Marine WOC â&#x20AC;&#x2DC;Kâ&#x20AC;&#x2122; number and Engine Type. Beta Marine will not be held responsible for incorrect supply without this information.

DRAWING 100-05302 Beta43 TECHNODRIVE TMC60 GEARBOX ASSEMBLY (PAGE 5 of 5) Ref No 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15

17 18 19 20 21 22 23 24 25

Part Number 201-90330 206-91950 217-01237 217-99293 217-99311 217-99321 217-99320 217-99330 208-62300 205-60990 217-99292 217-99299 217-99293 217-99321 217-99320 217-99326 217-99325 212-99240/01 204-91680 212-01430 201-01204 217-02585 202-05129 212-99241/01 202-97590 217-99339

Part Name SUPER 3 – DS15 INERTIA RING SAE 6.5 DRIVEPLATE 22-B-60 M12 x 30mm SOCKET CAP SCREW M8 FLAT WASHER M8 x 25mm SOCKET CAP SCREW M10 FLAT WASHER M10 SPRING WASHER M10 x 40 x 1.25mm SET SUPER 3 SERIES FLYWHEEL HOUSING TMC60 –BORG WARNER ADAPTOR M8 SPRING WASHER M8 x 25mm SET M8 FLAT WASHER M10 FLAT WASHER M10 SPRING WASHER M10 x 30mm SET (TOP) M10 x 25mm SET (BOTTOM) GEARBOX MORSE CABLE BALL JOINT TECHNODRIVE TMC 60 GEARBOX FLEXIBLE COUPLING SPACER 7mm OAL M8 x 25mm COUNTERSUNK SET SCREW TMC 60 MORSE GEAR BRACKET GEARBOX MORSE CABLE CLAMP SUPER 3 –TMC60 SUMP DRAIN PUMP BRACKET DOWEL 10mm DIAMETER x 20mm OAL

Quantity 1 1 6 6 6 6 6 6 1 1 4 6 6 7 7 3 4 1 1 1 2 2 1 1 1 2

Ref No A B C D E

Part Number N/A 217-99320 N/A 217-02760 217-99321

Part Name SEE 24 ABOVE M10 SPRING WASHER SEE 16 ABOVE M10 x 100 x 1.25mm SET M10 FLAT WASHER

Quantity 1 2 1 1 8

DRAWING 100-05303 (PAGE 1 of 1)

Prices and specifications are subject to amendment without notice. Information given is subject to our current conditions of tender and sale. In all cases please quote Beta Marine WOC â&#x20AC;&#x2DC;Kâ&#x20AC;&#x2122; number and Engine Type. Beta Marine will not be held responsible for incorrect supply without this information.

DRAWING 100-05303 Beta43, Beta50 & Beta60 OIL SYSTEM WITH STANDARD SUMP (PAGE 1 of 1) Ref No 01 02 03 04 05 06 07 08

11 12 13 14

Part Number 210-80061 212-00793 217-99294 217-99292 217-99303 210-94530 210-94200 210-91940 600-01129 600-00571 201-02318 201-02318 600-02845 600-62670 212-99395 200-94350

212-99378

217-99244

600-01717

211-70510/02

09 10

Part Name SUMP DRAIN PUMP TYPE 14 PUMP CLAMP M8 PENNY WASHER M8 SPRING WASHER M8 x 50mm SET 3/8"BSP SUMP DRAIN PUMP TAP HYD PIPE 3/8BSP 640mm STR-STR 1/4x3/8"BSP M-M BLOCK ELBOW SUPER 3 SERIES, 4 CYLINDER STANDARD SUMP GASKET, SUPER3 SUMP ¼”BSP SUMP DRAIN PUMP TAPPING –STD SUMP M16x3/8 SUMP PUMP TAPPING –SHALLOW SUMP SUMP FLANGE BOLT OIL PRESSURE SWITCH 1/8”BSPTM x 1/8”BSPF GALV ELBOW DELUXE OIL PRESSURE SENDER ¼” BSP 90o M-M COMPACT ADAPTOR –OPEN BREATHER ENGINES ONLY TO JANUARY 2006 5/8” ‘O’ CLIP –OPEN BREATHER ENGINES ONLY TO JANUARY 2006 SUPER 3 SERIES BREATHER PIPE –OPEN BREATHER ENGINES ONLY TO JANUARY 2006 SUPER 3 SERIES OIL FILTER

Quantity 1 2 2 2 2 1 1 1 1 1 1 24 1 1 1 1 1 1 1

Beta43, Beta50 & Beta60 OIL SYSTEM WITH SHALLOW SUMP OPTION ALL AS ABOVE, EXCEPT AS BELOW: Ref No 09 09 09 09 09 09 09 09

Part Number AK/S3/4/4/003 600-01548 600-01549 600-01550 600-01551 600-01552 600-01553 600-00571

Part Name SHALLOW OIL PAN KIT COMPLETE WITH GASKETS, STRAINER & DRAIN PLUG, SUPER 3 OIL PAN, SUPER BV19/2203 SHALLOW OIL FILTER, S3 SHALLOW SUMP DRAIN PLUG, S3 SHALLOW SUMP DRAIN PLUG, S3 SHALLOW SUMP GASKET COPPER, S3 SHALLOW SUMP GASKET COPPER, S3 SHALLOW SUMP GASKET, SUPER3 SHALLOW SUMP

Quantity 1 1 1 1 1 1 1 1

DRAWING 100-05304 (PAGE 1 of 1)

Prices and specifications are subject to amendment without notice. Information given is subject to our current conditions of tender and sale. In all cases please quote Beta Marine WOC â&#x20AC;&#x2DC;Kâ&#x20AC;&#x2122; number and Engine Type. Beta Marine will not be held responsible for incorrect supply without this information.

DRAWING 100-05304 Beta43, 50 & 60 STANDARD ALTERNATOR, FLYWHEEL & AIR INTAKE SYSTEM

(PAGE 1 of 1) Ref No 01

Part Number 214-96830 214-99223

214-87050 202-96260 217-99292 217-99306 217-99293 217-99308 217-99293 N/A N/A 200-91730 200-91740 217-99294 217-99294 217-99292 217-99299 201-58920 201-58920 200-01155 217-99293 217-99292 217-99295 600-02102 600-07154 600-02267 600-07153 217-99351 217-99342 600-03192 600-07155 212-98460 211-93700 211-08131 211-09178 211-61831 211-08133 211-09179 N/A

209-09225

02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Part Name DRIVEBELT (Beta43 to Sept2008, Beta50 to July2007) DRIVEBELT (Beta43 from Sept 2008 to April2011, Beta50 From

Quantity

July2007& Beta60 to April 2011) DRIVEBELT (All from April 2011)

SUPER 3 SERIES ALTERNATOR ARM M8 SPRING WASHER M8 x 80mm SET (MODIFIED TO 75mm LONG) M8 FLAT WASHER M8 x 130mm BOLT M8 FLAT WASHER PART OF 65 AMP ALTERNATOR –SEE 18 PART OF 65 AMP ALTERNATOR –SEE 18 ISKRA PULLEY (A SECTION FOR SUPER 3) ISKRA SPACER (THICK) M8 PENNY WASHER M8 PENNY WASHER M8 SPRING WASHER M8 x 25mm SET SUPER 3 -65 AMP SHORT ALTERNATOR SPACER SUPER 3 -65 AMP SHORT ALTERNATOR SPACER 12VOLT 65/ 70 AMP ALTERNATOR M8 FLAT WASHER M8 SPRING WASHER M8 NUT BOLT, FLYWHEEL Beta43 & Beta50 BOLT, FLYWHEEL Beta60 Beta43 & Beta50 FLYWHEEL Beta60 FLYWHEEL M12 x 30 x 1.25mm SET M12 SPRING WASHER Beta43 & Beta50 FLYWHEEL HOUSING BACKPLATE Beta60 FLYWHEEL HOUSING BACKPLATE HEAVY DUTY CLAMP 56-59mm AIR FILTER ASSEMBLY (INC 29 & 30) 3 CLAMP TYPE AIR FILTER ASSEMBLY (INC 29 & 30) WINGNUT TYPE AIR FILTER ASSEMBLY -PLASTIC AIR FILTER ELEMENT (3 CLAMP TYPE TO DEC 2010) AIR FILTER ELEMENT (WINGNUT TYPE FROM DEC 2010) AIR FILTER ELEMENT (SUITS PLASTIC ASSEMBLY ONLY) AIR FILTER ASSEMBLY COVER –SEE 28 ADAPTOR SLEEVE, TO SUIT 211-09178 PLASTIC AIR FILTER ASSEMBLY

1 1 1 1 3 1 1

1 1 1 1 1 1 1 1 1 1 1 1 6 1 11 11 1 1 N/A N/A 1 1 N/A 1

DRAWING 100-05305 (PAGE 1 of 2)

Prices and specifications are subject to amendment without notice. Information given is subject to our current conditions of tender and sale. In all cases please quote Beta Marine WOC â&#x20AC;&#x2DC;Kâ&#x20AC;&#x2122; number and Engine Type. Beta Marine will not be held responsible for incorrect supply without this information.

DRAWING 100-05305 Beta43, Beta50 & Beta60 HEAT EXCHANGE FUEL SYSTEM (PAGE 1 of 2) Ref No 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20

Part Number 202-03057 217-99341 217-99342 217-99351 212-99253 202-01460 212-97114 (212-99253) 217-99283 217-99275 217-99276 212-02826 212-02423 212-02826 212-02835 212-02910 218-02827 212-02910 217-99292 217-99293 202-97630 202-05064

21 202-06194 22

211-60210

600-80290

24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39

N/A N/A 217-99293 217-99292 217-99298 N/A N/A 212-02826 212-02423 212-02423 212-02826 218-02827 212-02910 217-99305 212-99241/01 600-03233 600-80870 600-00633 600-80870

Part Name FUEL BLOCK BRACKET, SUPER 3 H/E M12 FLAT WASHER M12 SPRING WASHER M12 x 30 x 1.25mm SET ¼”BSPT MALE x 8mm HOSE TAIL FUEL CONNECTION BLOCK 8mm x1/4"BSPT MALE COMPRESSION ELBOW (or ¼”BSPT MALE x 8mm HOSE TAIL –USA ONLY) M6 x 30mm SET M6 SPRING WASHER M6 FLAT WASHER STAINLESS STEEL HOSE CLIP TYPE 15 FUEL HOSE 8mm BORE -ISO7480 CLASS A1 STAINLESS STEEL HOSE CLIP TYPE 15 ¼”BSPT MALE x 5mm HOSE TAIL STAINLESS STEEL HOSE CLIP TYPE 12 FUEL HOSE 5mm BORE -ISO7480 CLASS A1 STAINLESS STEEL HOSE CLIP TYPE 12 M8 SPRING WASHER M8 FLAT WASHER SUPER 3 SERIES H/E FUEL FILTER BRACKET SPEED CONTROL MORSE SADDLE BRACKET –TO JULY 2008 SPEED CONTROL MORSE SADDLE BRACKET – FROM JULY2008 FUEL FILTER FUEL FILTER ASSEMBLY (COMPLETE WITH HEAD) INCLUDING 09 & 10 PART OF FUEL FILTER ASSEMBLY –SEE 23 PART OF FUEL FILTER ASSEMBLY –SEE 23 M8 FLAT WASHER M8 SPRING WASHER M8 x 20mm SET PART OF FUEL FILTER ASSEMBLY –SEE 23 PART OF FUEL FILTER ASSEMBLY –SEE 23 STAINLESS STEEL HOSE CLIP TYPE 15 FUEL HOSE 8mm BORE -ISO7480 CLASS A1 FUEL HOSE 8mm BORE -ISO7480 CLASS A1 STAINLESS STEEL HOSE CLIP TYPE 15 FUEL HOSE 5mm BORE -ISO7480 CLASS A1 STAINLESS STEEL HOSE CLIP TYPE 12 M8 x 70mm SET SPEED CONTROL MORSE CABLE CLAMP FUEL BLEED SCREW-SUPER 3 SERIES FUEL LIFT PUMP, Beta43 & Beta60 FUEL LIFT PUMP, Beta50 TO JULY 2007 FUEL LIFT PUMP, Beta50 FROM JULY 2007

Quantity 1 2 2 2 1 1 2 (2) 2 2 2 1 0.33m 1 1 1 0.36m 1 2 2 1 1 1 1

2 2 2

2 0.22m 0.21m 2 0.29m 2 2 1 1 1

DRAWING 100-05305 (PAGE 2 of 2)

Prices and specifications are subject to amendment without notice. Information given is subject to our current conditions of tender and sale. In all cases please quote Beta Marine WOC â&#x20AC;&#x2DC;Kâ&#x20AC;&#x2122; number and Engine Type. Beta Marine will not be held responsible for incorrect supply without this information.

DRAWING 100-05305 Beta43, Beta50 & Beta60 HEAT EXCHANGE FUEL SYSTEM (PAGE 2 of 2) Ref No 01 02 03 04

06 07 08 09 10 11 12

Part Number 600-00538 600-80870 600-00633 600-80870 217-99275 217-99280 600-03184 600-07156 600-03184/50 600-07152 600-07152 600-01113 600-01031 600-01114 600-02049 600-01115 600-01465 600-01116 600-01032 600-00622 600-00537 600-00548 600-00549 600-00548 600-00541 600-02048 600-00542

14 15 16 17 18

600-00242 600-01042 600-91803 600-91802 600-91801

Part Name GASKET, FUEL LIFT PUMP FUEL LIFT PUMP –Beta43 FUEL LIFT PUMP –Beta50 TO JULY 2007 FUEL LIFT PUMP –Beta50 & 60 FROM JULY 2007 M6 SPRING WASHER M6 x 16mm SET Beta43 FUEL INJECTION PUMP –TO SEPT 2008 Beta43 FUEL INJECTION PUMP –FROM SEPT 2008 Beta50 FUEL INJECTION PUMP –TO JULY 2007 Beta50 FUEL INJECTION PUMP –FROM JULY 2007 Beta60 FUEL INJECTION PUMP INJECTOR PIPE A, (1) OPEN BREATHER ENGINES TO JAN 2006 INJECTOR PIPE A, (1) BTM ENGINES FROM JAN 2006 INJECTOR PIPE B, (2) OPEN BREATHER ENGINES TO JAN 2006 INJECTOR PIPE B, (2) BTM ENGINES FROM JAN 2006 INJECTOR PIPE C, (3) OPEN BREATHER ENGINES TO JAN 2006 INJECTOR PIPE C, (3) BTM ENGINES FROM JAN 2006 INJECTOR PIPE D, (4) OPEN BREATHER ENGINES TO JAN 2006 INJECTOR PIPE D, (4) BTM ENGINES FROM JAN 2006 NUT, INJECTOR SUPER 3 SERIES COPPER GASKET, FUEL LEAK OFF RAIL FUEL LEAK OFF RAIL Beta43 & Beta60 FUEL LEAK OFF RAIL Beta50 TO JULY 2007 FUEL LEAK OFF RAIL Beta50 FROM JULY 2007 INJECTOR, Beta43 TO SEPTEMBER 2008, COMPLETE (INC 10, 11) INJECTOR, Beta50 TO JULY 2007, COMPLETE (INC 10, 11) INJECTOR, Beta43 FROM SEPT 2008, Beta50 FROM JULY 2007 & Beta60, COMPLETE (INC 10, 11) GASKET, INJECTOR SUPER 3 SERIES HEAT SEAL, INJECTOR FUEL CLAMP SCREW, WITH WASHER FUEL CLAMP –NO THREAD FUEL CLAMP –WITH THREAD

Quantity 1

1 2 2

1 1 1 1 4 4 1

4 4 4 3 3 3

DRAWING 100-05306 (PAGE 1 of 1)

Prices and specifications are subject to amendment without notice. Information given is subject to our current conditions of tender and sale. In all cases please quote Beta Marine WOC â&#x20AC;&#x2DC;Kâ&#x20AC;&#x2122; number and Engine Type. Beta Marine will not be held responsible for incorrect supply without this information.

DRAWING 100-05306 Beta43, Beta50 & Beta60 FEET & SPEED CONTROL BRACKETRY (PAGE 1 of 1) Ref No 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21

Part Number 202-88660 217-99342 217-99345 217-99341 202-88650 217-99321 217-99320 217-99329 217-99351 217-99342 217-99341 217-99345 217-99342 217-99341 213-85900/02 213-96970/01 202-88660 202-88640 217-99351 217-99342 217-99341 217-99354 202-05064

22 202-06194 23 24 25

217-99276 217-99275 217-99282

212-99240/01

202-01396

28 29

217-99293 217-99296 217-99354

217-99354

212-92270

217-99355 212-92270

33 212-92270

Part Name S3 REAR FOOT (HANDED PAIR AS 15) M12 SPRING WASHER M12 x 30mm SET M12 FLAT WASHER SUPER 3 H/E FRONT FOOT (STAR) M10 FLAT WASHER M10 SPRING WASHER M10 x 25 x 1.25mm SET M12 x 30 x 1.25mm SET M12 SPRING WASHER M12 FLAT WASHER M12 x 30mm SET M12 SPRING WASHER M12 FLAT WASHER 45 SHORE FLEXIBLE MOUNT (MOST Beta43 ONLY) 55 SHORE FLEXIBLE MOUNT Beta43 –PRM260 & ALL Beta50 & Beta60 S3 REAR FOOT (HANDED PAIR AS 01) SUPER 3 H/E FRONT FOOT (PORT) M12 x 30 x 1.25mm SET M12 SPRING WASHER M12 FLAT WASHER 1/4" UNF HEX FULL NUT –Beta43 to Sept2008, Beta50 to July2007 SUPER 3 SPEED CONTROL BRACKET –Beta43 to Sept2008, Beta50 to July2007 SUPER 3 SPEED CONTROL BRACKET –Beta43 from Sept2008, Beta50 from July2007, Beta60 M6 FLAT WASHER –Beta43 to Sept2008, Beta50 to July2007 M6 SPRING WASHER –Beta43 to Sept2008, Beta50 to July2007 M6 x 25mm SET –Beta43 to Sept2008, Beta50 to July2007 SPEED CONTROL MORSE CABLE BALL JOINT –Beta43 to Sept2008, Beta50 to July2007 SUPER 3 SPEED CONTROL LEVER ASSY –Beta43 to Sept2008, Beta50 to July2007 M8 FLAT WASHER –Beta43 to Sept2008, Beta50 to July2007 M8 NYLOC NUT –Beta43 to Sept2008, Beta50 to July2007 1/4" UNF HEX FULL NUT –Beta43 to Sept2008, Beta50 to July2007 1/4" UNF HEX FULL NUT –Beta43 from Sept2008, Beta50from July2007 & Beta60 SUPER 3 SPEED CONTROL ELBOW –Beta43 to Sept2008, Beta50 to July2007 1/4" UNF THREADED BAR –Beta43 to Sept2008, Beta50 to July2007 SUPER 3 SPEED CONTROL ELBOW –Beta43 to Sept2008, Beta50 to July2007 SUPER 3 SPEED CONTROL ELBOW –Beta43 from Sept2008, Beta50from July2007 & Beta60

Quantity 1 3 3 3 1 1 1 1 3 3 3 3 3 3

4 1 1 4 4 4 1 1 1 2 2 2 1 1 1 1 1 1 0.05m 1

DRAWING 100-05466 Beta43, Beta50 & Beta60 WITH 100 AMP ALTERNATOR / BETA CONTROLLER (PAGE 1 of 1)

DRAWING 100-05466 Beta43, Beta50 & Beta60 WITH 100 AMP ALTERNATOR / BETA CONTROLLER (PAGE 1 of 1) Ref No 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34

Part Number 200-03008 217-99295 217-99292 217-99293 217-99293 N/A 217-99302 201-02251 N/A N/A N/A 217-03178 201-61440/46 202-05459 201-61420/10 202-01086 217-99294 217-99292 217-99301 217-99306 214-00497 214-92105 214-07037 217-99293 217-02738 201-05440 217-99293 217-99298 217-99292 217-99293 201-05439 200-01771 200-02684 200-02737 200-02580 200-05267 200-00959

Part Name ALTERNATOR, 100A INTERNAL FAN M8 NUT M8 SPRING WASHER M8 FLAT WASHER M8 FLAT WASHER SPACER (PART OF 200-03008) M8 x 40mm SET 6K ALTERNATOR DRIVEN PULLEY 80mm DIAMETER FLAT WASHER (PART OF 200-03008) SPRING WASHER (PART OF 200-03008) NUT (PART OF 200-03008) 3/8UNC x 4 ½” SOCKET CAP SCREW SPACER 25DIA x 63mm 201-61440 -MACHINED TO 46mm OAL 100AMP ALTERNATOR ARM SPACER BRACKET SPACER 25DIA x 20.5mm 201-61420 -MACHINED TO 10mm OAL 100AMP ALTERNATOR ADJUSTING ARM M8 PENNY WASHER M8 SPRING WASHER M8 x 35mm SET M8 x 80mm SET Belt Polyvee 100 Amp 6PK1173 Beta43 to Oct2008, Beta50 to July2007 Belt, 6K Polyvee 100A -All from 2008 & Beta43 from Oct2008 –Oct09 Belt, 6K Polyvee 100Amp -All from October 2009 M8 FLAT WASHER M8 x 70mm SOCKET CAP SCREW S3 CRANK OVERPULLEY 6 GROOVE FOR 100AMP ALT. M8 FLAT WASHER M8 x 20mm SET M8 SPRING WASHER M8 FLAT WASHER S3 WATER PUMP PULLEY 6 GROOVE FOR 100AMP ALT. REGULATOR TO SUIT 200-03008 ALTERNATOR BRUSH BOX 100A –TO SUIT CONTROLLER ONLY WIRING LOOM BETA CONTROLLER BETA CONTROLLER SUPER 3 SERIES ENGINE HARNESS ENGINE HARNESS FUSE

Quantity 1 1 1 1 1

1 1

1 1 1 1 1 2 1 1 2 1 3 3 1 2 4 4 4 1 1 1 1 1 1

Wiring harness & switches

010

020

Ref. No. 010 020 030 040

Part No. 200-00959 200-05267 600-62670 600-62820

050

200-01133

060

212-01480

3/8BSPT Male x1/8BSP Female galvanised adaptor for 200-01133

070 080 090 100 110 120 130 140 150 160

200-04588/01 200-04588/02 200-04588/03 200-04588/04 200-04588/05 200-04588/06 200-04588/08 200-04588/10 200-04588/15 200-57640

1 metre extension harness 2 metre extension harness 3 metre extension harness 4 metre extension harness 5 metre extension harness 6 metre extension harness 8 metre extension harness 10 metre extension harness 15 metre extension harness Relay (for extension harnesses)

1 1 1 1 1 1 1 1 1 1

030

Part Name

Qty

Engine harness fuse (blade type) Super3 Series engine harness Oil pressure switch (not 2C panel) Water temperature switch (not 2C panel) 0 Water temperature switch / sender 95 C (Not 2C panel) 1/8BSP

040

1 1 1 1 1

Remarks

Includes fuse Std from Nov 2008 Std before Nov 2008 Required if temp sender being fitted into 3/8BSP thread Not shown Not shown Not shown Not shown Not shown Not shown Not shown Not shown Not shown Not shown 050

060

Prices and specifications are subject to amendment without notice. Information given is subject to our current conditions of tender and sale. In all cases please quote Beta Marine WOC â&#x20AC;&#x2DC;Kâ&#x20AC;&#x2122; number and Engine Type. Beta Marine will not be held responsible for incorrect supply without this information.

Simple 2A panel –LED type to May 2005

010 Ref. No.

Part No.

010

N/A

020 030 040 050

020 Part Name

040 Qty

Simple panel (complete with LED pack)

600-00057 600-00058 200-00072 200-01295 200-01296

Kubota keyswitch Kubota keys -PAIR Panel stop button LED Pack assembly & buzzer (SEASPEC) LED Pack assembly & buzzer (DOMESTIC)

1 1 1 1 1

200-01288

Panel blank 2A –LED SEASPEC

200-01291

Panel blank 2A –LED DOMESTIC

200-00639 200-00048 200-00047

11 Way plug to suit male type spade Large shroud for 11 way plug Male spade for 11 way plug

1 1 11

060 070 080 090 100

Remarks No longer available, Use AK/2AS/KS01

N/A

Not shown Not shown Not shown Check availability Does not include 050 Check availability Does not include 050 Not shown Not shown Not shown

Suits 3 red, 1 green LED Suits 4 red, 1 green LED

Simple 2A panel –LAMP type from May 2005

Ref. No. 010 020 030 040 050 060 070 080 090 100 110 120

010

020

Part No.

Part Name

Qty

Simple panel with 3m loom (complete) Kubota keyswitch –suits small key Kubota keyswitch –suits large key Kubota keys –PAIR (SMALL) Kubota keys –PAIR (LARGE) Panel stop button Red 12V warning lamp & retaining clip Green 12V power on lamp & retaining clip Panel blank 2A –LAMP TYPE 11 Way plug to suit male type spade Large shroud for 11 way plug Male spade for 11 way plug Alarm board with buzzer

1 1 1 1 1 1 3 1 1 1 1 11 1

AK/2AS/KS01 600-00057 600-00057/01 600-00058 600-00058/01 200-00072 200-04657 200-04656 N/A 200-00639 200-00048 200-00047 200-04655

050

060

040

Remarks

To August 2008, check availability From August 2008 To August 2008 From August 2008

Check availability Not shown Not shown Not shown Not shown

2AB panel –LED type to May 2005

010

020 Ref. No.

Part No.

010

200-00853

020

200-00072 200-00054 200-02373/03 600-00057 600-00058 200-01295 200-01296

030 040 050 060

030

Part Name

040 Qty

2AB panel (excludes tacho –see 030)

Panel stop button 0-4000 RPM tacho & hourmeter (DATCON) 0-3000 RPM tacho & hourmeter (VDO) Kubota keyswitch Kubota keys -PAIR LED Pack assembly & buzzer (SEASPEC) LED Pack assembly & buzzer (DOMESTIC)

1 1 1 1 1 1 1

200-01289

Panel blank 2AB (SEASPEC)

200-01292

Panel blank 2AB (DOMESTIC)

200-00639 200-00048 200-00047

11 Way plug to suit male type spade Large shroud for 11 way plug Male spade for 11 way plug

1 1 11

070 080 090 100 110

Remarks No longer available, Use AK/2ABD/KS02

N/A

To March 2002 From March 2002, Viewline Jan2010 Not shown Not shown Not shown Check availability, Does not include 050 Check availability, Does not include 050 Not shown Not shown Not shown

2AB panel –LAMP type from May 2005

010

020 Ref. No. 010 020 030 040 050 060 070 080 090 100 110 120 130 140

Part No. AK/2ABD/KS02 200-00072 200-02373/03 600-00057 600-00057/01 600-00058 600-00058/01 200-04657 200-04656 N/A 200-00639 200-00048 200-00047 200-04655 200-87020

060

030

070

Part Name

Qty

2AB panel with 3m loom (Complete) Panel stop button 0-3000 RPM tacho & hourmeter (VDO) Kubota keyswitch –suits small key Kubota keyswitch –suits large key Kubota keys –PAIR (SMALL) Kubota keys –PAIR (LARGE) Red 12V warning lamp & retaining clip Green 12V power on lamp & retaining clip Panel blank 2AB (DOMESTIC) 11 Way plug to suit male type spade Large shroud for 11 way plug Male spade for 11 way plug Alarm board with buzzer 12V 28Ra 40Amp relay

1 1 1 1 1 1 1 4 1 1 1 1 11 1 1

040

Remarks

From March 2002, Viewline Jan2010 To August 2008 From August 2008 To August 2008 From August 2008

Check availability Not shown Not shown Not shown Not shown Not shown

2AB’V’ panel –LAMP type to May 2005 010

090 120

020

040

050

060

Ref. No.

Part No.

010

200-89421

2AB’V’ panel (excludes tacho –see 120)

020 030 040 050 060 070 080 090 100

600-00057 600-00058 200-00059 200-00060 200-00061 200-00072 200-97490 200-06434 200-98980

Kubota keyswitch Kubota keys -PAIR Warning lamp battery Warning lamp oil Warning lamp water Panel stop button 12V bulb 12V DC buzzer to suit 2AB’V’ panel Panel diode pack

1 1 1 1 1 1 3 1 1

110

200-00042

Panel blank 2AB’V’

0-4000 RPM tacho & hourmeter (DATCON) 0-3000 RPM tacho & hourmeter (VDO) 11 Way plug to suit male type spade Large shroud for 11 way plug Male spade for 11 way plug

1 1 1 1 11

120 130 140 150 160

200-00054 200-02373/03 200-00639 200-00048 200-00047

Part Name

070 Qty

Remarks No longer available, Use AK/2ABV/KS01

N/A

Not shown

Not shown Not shown Not shown Check availability Includes 090 only To March 2002 From March 2002, Viewline Jan2010 Not shown Not shown Not shown

2AB’V’ panel –LAMP type from May 2005 010

070

020

040 Ref. No. 010 020 030 040 050 060 070 080 090 100 110 120 130

Part No. AK/2ABV/KS01 600-00057 600-00057/01 600-00058 600-00058/01 200-04657 200-04656 200-00072 200-02373/03 N/A 200-00639 200-00048 200-00047 200-04655

050

060

Part Name

Qty

2AB’V’ panel with 3m loom (complete) Kubota keyswitch –suits small key Kubota keyswitch –suits large key Kubota keys –PAIR (SMALL) Kubota keys –PAIR (LARGE) Red 12V warning lamp & retaining clip Green 12V power on lamp & retaining clip Panel stop button 0-3000 RPM tacho & hourmeter (VDO) Panel blank 2ABV 11 Way plug to suit male type spade Large shroud for 11 way plug Male spade for 11 way plug Alarm board with buzzer

1 1 1 1 1 3 1 1 1 1 1 1 11 1

Remarks

To July 2008 From July 2008 To July 2008 From July 2008

From March 2002, Viewline Jan2010 Check availability Not shown Not shown Not shown Not shown

2AB’V’W pushbutton control panel –LAMP type from May 2005 010

050

020

030 Ref. No. 010 020 030 040 050 060 070 080 090 100 110 120 130

Part No. AK/2ABVW/KS01 200-00072 200-04657 200-04656 200-02373/03 N/A 200-00639 200-00048 200-00047 200-04655 200-87020 200-03466 200-02618

040 Part Name

Qty

Remarks

2AB’V’W panel with 3m loom (complete) Panel stop / start / heat button Red 12V warning lamp & retaining clip Green 12V power on lamp & retaining clip 0-3000 RPM tacho & hourmeter (VDO) Panel blank 2ABVW 11 Way plug to suit male type spade Large shroud for 11 way plug Male spade for 11 way plug Alarm board with buzzer 12V 28Ra 40Amp relay Pektron diode Diode bridge

1 3 3 1 1 1 1 1 11 1 2 1 1

From March 2002, Viewline Jan2010 Check availability Not shown Not shown Not shown Not shown Not shown Not shown Not shown

Service kit to suit 2AB’V’W pushbutton control panel

010

Ref. No. 010

Part No. AK/2ABVW/RKS01

Part Name 2AB’V’W panel service kit (complete)

Qty

Remarks

SFIA 2B panel –LAMP type to May 2005 120

130

010 020

040 Ref. No.

Part No. 200-05408

010 200-60952 020 030 040 050 060 070 080 090 100 110 120 130 140 150 160

600-00057 600-00058 200-00059 200-00060 200-00061 200-00072 200-97490 200-99433 200-98980 200-00043 200-00054 200-02373/03 200-91400 200-91390 200-00639 200-00048 200-00047

050

060

Part Name SFIA 2B Panel –with temperature gauge From February 2003 (excludes tacho -see 120) SFIA 2B Panel –with voltmeter To February 2003 (excludes tacho –see 120) Kubota keyswitch Kubota keys -PAIR Warning lamp battery Warning lamp oil Warning lamp water Panel stop button 12V bulb 12V DC Buzzer Panel diode pack Panel blank SFIA 2B 0-4000 RPM tacho & hourmeter (DATCON) 0-3000 RPM tacho & hourmeter (VDO) Water temperature gauge (from February 2003) Voltmeter gauge (-February 2003) 11 Way plug to suit male type spade Large shroud for 11 way plug Male spade for 11 way plug

070 Qty 1 1 1 1 1 1 1 1 3 1 1 1 1 1 1 1 1 1 11

Remarks No longer available, Use AK/2BT/KS02 No longer available, Use AK/2BT/KS02

N/A N/A

Not shown

Not shown Not shown Not shown Check availability To March 2002 From March 2002, Viewline Jan2010 From February 2003 To February 2003 Not shown Not shown Not shown

SFIA 2B panel –LAMP type from May 2005 070

080

010

020

040 Ref. No. 010 020 030 040 050 060 070 080 090 100 110 120 130 140

Part No. AK/2BT/KS02 600-00057 600-00057/01 600-00058 600-00058/01 200-04657 200-04656 200-00072 200-02373/03 200-96200 N/A 200-04655 200-00639 200-00048 200-00047

050

Part Name SFIA 2B Panel –with temperature gauge From May 2005 (complete) Kubota keyswitch –suits small key Kubota keyswitch –suits large key Kubota keys –PAIR (SMALL) Kubota keys –PAIR (LARGE) Red 12V warning lamp & retaining clip Green 12V power on lamp & retaining clip Panel stop button 0-3000 RPM tacho & hourmeter (VDO) Murphy water temperature gauge Panel blank 2B Alarm board with buzzer 11 Way plug to suit male type spade Large shroud for 11 way plug Male spade for 11 way plug

060 Qty 1 1 1 1 1 3 1 1 1 1 1 1 1 1 11

Remarks With Murphy temp gauge To July 2008 From July 2008 To July 2008 From July 2008

From March 2002, Viewline Jan2010 (Murphy not shown) Check availability Not shown Not shown Not shown Not shown

Murphy deluxe 2C panel & senders –Seaspec 4 Lamp-to May 2005 070

010

020

Ref. No.

Part No.

010

200-00854

020 030 040 050 060

200-00072 200-00073 200-98965 200-01295 200-01290 200-00054 200-02373/03 200-96190 200-96200 200-96210 212-04355 200-94350 200-91980 200-94360 200-93830 200-00046 200-00181

070 080 090 100 110 120 130 140 150 160 170 180 190

080

090

030

100

Part Name Murphy 2C deluxe panel –Seaspec 4 Lamp (Excludes gauges & loom –See 070, 080, 090, 100 & 160) Panel stop button Murphy panel keyswitch Murphy deluxe panel single key LED Pack assembly & buzzer –Seaspec 4 Lamp Murphy deluxe panel blank (Seaspec 4 Lamp) 0-4000 RPM tacho & hourmeter 0-3000 RPM tacho & hourmeter (VDO) Murphy oil pressure gauge Murphy water temperature gauge Murphy voltmeter gauge 1/8”BSP MxF elbow Murphy pressure sender Water temperature sender adaptor Murphy temperature sender Murphy deluxe 3m connecting loom 11 Way socket to suit female type spade Female spade for 11 way plug

110

Qty

Remarks

No longer available, Use AK/2CD/KS01

1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 11

N/A

Not shown Not shown –no longer available Excludes LED pack To March 2002 From March 2002, Viewline Jan2010

Not shown Not shown Not shown

120 140

130

Murphy deluxe 2C panel & senders –Domestic 5 Lamp –to May 2005 070

010

020

Ref. No.

Part No.

010

200-00851

020 030 040 050 060

200-00072 200-00073 200-98965 200-01296 200-01293 200-00054 200-02373/03 200-96190 200-96200 200-96210 212-04355 200-94350 200-91980 200-94360 200-93830 200-00046 200-00181

070 080 090 100 110 120 130 140 150 160 170 180 190

080

090

030

100

Part Name Murphy 2C deluxe panel –Domestic 5 Lamp (Excludes gauges & loom –See 070, 080, 090, 100 & 160) Panel stop button Murphy panel keyswitch Murphy deluxe panel single key LED Pack assembly & buzzer –Domestic 5 Lamp Murphy deluxe panel blank (Domestic 5 Lamp) 0-4000 RPM tacho & hourmeter 0-3000 RPM tacho & hourmeter (VDO) Murphy oil pressure gauge Murphy water temperature gauge Murphy voltmeter gauge 1/8”BSP MxF elbow Murphy pressure sender Water temperature sender adaptor Murphy temperature sender Murphy deluxe 3m connecting loom 11 Way socket to suit female type spade Female spade for 11 way plug

110

Qty

Remarks

No longer available, Use AK/2CD/KS01

1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 11

N/A

Not shown Not shown –no longer available Excludes LED pack To March 2002 From March 2002, Viewline Jan2010

Not shown Not shown Not shown

120 140

130

Murphy deluxe 2C panel & senders –Domestic 5 Lamp –from May 2005 080

010 Ref. No. 010 020 030 040 050 060 070 080 090 100 110 120 130 140 150 160 170 180 190

090

020 Part No. AK/2CD/KS01 200-00072 600-00057 600-00057/01 600-00058 600-00058/01 200-04657 200-04656 N/A 200-02373/03 200-96190 200-96200 200-96210 212-04355 200-94350 200-91980 200-94360 200-04588/03 200-00639 200-00047 200-04583/5W

060

030

050

100

110

Part Name

Qty

Remarks

Murphy 2C deluxe panel –Domestic 5 Lamp Panel stop button Kubota keyswitch –suits small key Kubota keyswitch –suits large key Kubota keys –PAIR (SMALL) Kubota keys –PAIR (LARGE) Red 12V warning lamp & retaining clip Green 12V power on lamp & retaining clip Murphy deluxe panel blank (Domestic 5 Lamp) 0-3000 RPM tacho & hourmeter (VDO) Murphy oil pressure gauge Murphy water temperature gauge Murphy voltmeter gauge 1/8”BSP MxF elbow Murphy pressure sender Water temperature sender adaptor Murphy temperature sender 3m extension harness 11 Way plug to suit male type spade Male spade for 11 way plug Domestic charge load resistor

1 1 1 1 1 1 4 1 1 1 1 1 1 1 1 1 1 1 1 11 1

Complete, less 3m connection cable 170

120

150

130

To July 2008 From July 2008 To July 2008 From July 2008

Check availability, use 200-05445 From March 2002, Viewline Jan2010

Not shown Not shown Not shown Fits on rear of domestic charge lamp

190

140

Panel gauges & senders

010

040

020

Ref. No. 010 020 030 040 050 060 070 080 090 100 110 120 130

Part No. 200-00054 200-02373/03 200-08011 200-91380 200-07981 200-91390 200-07980 200-91400 200-90000 200-01392 212-99397 200-62680 200-01133 600-01848 600-06687 200-04805 200-96220 200-04805

060

050

Part Name

Qty

0-4000 RPM tacho & hourmeter (Datcon) 0-3000 RPM tacho & hourmeter (VDO) Oil pressure gauge –VDO Viewline Oil pressure gauge –Datcon Water temperature gauge –VDO Viewline Water temperature gauge –Datcon Voltmeter gauge –VDO Viewline Voltmeter gauge –Datcon Hourmeter gauge Datcon gauge bulb 12V 1/8”BSP MxF elbow 0-5 Bar switch / sender Water temperature switch / sender 95C 3/8” Copper washer to suit 600-06687 3/8BSPT Male x1/8BSP Female adaptor Bulb, red for 12V VDO OceanLine tacho Datcon tacho bulb 12V Bulb to suit VDO OceanLine tacho

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 2

Remarks To March 2002 From March 2002, Viewline Jan2010 Not shown Not shown Not shown Not shown

Required if temp sender being fitted into 3/8BSP thread under thermostat housing Not shown Not shown *Not suitable for ViewLine*

070 080 090

100

VDO Gauge accessories

010

020

030

040

Ref. No. 010 020 030 040 050 060

Part No. 200-07664 200-08875 200-07664-OL 200-10381 200-10091B 200-10090B

050

Part Name

Qty

8 PIN CONNECTOR -FOR VIEWLINE GAUGES VDO VIEWLINE TACHO CALIBRATION WIRING HARNESS 8 PIN CONNECTOR, TO SUIT OCEANLINE REPLACEMENT OCEANLINE CONVERSION HARNESS TO SUIT VIEWLINE PANEL BLACK BEZEL FOR 52mm VIEWLINE GAUGE BLACK BEZEL FOR 85mm VIEWLINE TACHO

Remarks

1 1 1 1 1 1

060

Various electrical & panel parts and components

010

020

030

040

050

060

070 080 090

100

140

150

190 230 Ref. No. 010 020 030 040 050 060 070 080 090 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240

160

200 Part No. 200-00048 200-00047 200-00639 200-00638 200-00181 200-00046 200-01426 200-00959 200-00640 200-57640 200-87020 200-89950/01 600-02405 600-00058 200-98965 200-99433 200-98980 200-04655 600-00058/01 200-08830 200-06128 200-03466 200-02618 200-04623

110

120

170

210

Part Name Large shroud for 11 way plug Male spade for 11 way plug 11 Way plug to suit male type spade Small shroud for 11 way socket Female spade for 11 way socket 11 Way socket to suit female type spade Plastic clear fuse cover Fuse, blade type 40 Amp Fuse holder, blade type for 40 Amp 12V 33Ra 70Amp relay 12V 28Ra 40Amp relay 12V heavy duty relay Kubota alternator 3 pin coupler Kubota keys –PAIR, SMALL Murphy deluxe panel single key 12V buzzer Panel diode pack Alarm board with buzzer Kubota keys –PAIR, LARGE Water temperature switch 110C 3/8BSP Oil pressure switch 49kPa 1/8BSP Pektron diode Diode bridge 14 Core panel cable

130

180

220 Qty 1 11 1 1 11 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 /m

Remarks On panel connection On panel connection On panel connection On engine harness On engine harness On engine harness On engine harness On engine harness On engine harness For extended looms On rear of panel For insulated earth For 3 pin Denso alt Standard to mid 2008 Deluxe to May 2005 2B to May 2005 2ABV to May 2005 Std from May 2005 From mid 2008 Propulsion standard from January 2015 Propulsion standard from October 2016 Push button panels Push button panels Not shown

Expansion water bottle & spare parts list –all engines

Ref. No. 010

Part No. AK/SML/EXP/001

020 030 040 050 060 070 080 090 100 110

212-99233 212-98462 218-99390 212-98462 209-03065 209-03067 209-03066 212-07009 212-07011 209-03068

Part Name

Qty

Remarks

Expansion tank kit, complete 1 (This kit consists of all items listed individually below) 3/8BSPT-5/8" Hose connector 1 Stainless steel hose clip 17-25mm 1 5/8" Bore water hose –from March 2015 1.5m Stainless steel hose clip 17-25mm 1 Expansion tank 1 Expansion tank mounting bracket 1 Expansion tank lid 1 No 22 Stainless steel hose clip 1 Hose cap blanking bung 1 Expansion tank holding band 1

Beta Marine Limited Davy Way, Waterwells, Quedgeley, Gloucester, GL2 2AD, U.K. Tel: +44 (0) 1452 723492 Fax: +44 (0) 1452 883742 www.betamarine.co.uk sales@betamarine.co.uk

Standard fitting of calorifier connections to Super 3 -Heat exchanger cooled engine from March 2011 Hot water to calorifier tank 1. Remove 1/8” BSP bung from cylinder head, behind last injector at rear starboard side of engine. 2. Fit 1/8”BSP Male swivel adaptor with the supplied copper washer. Into this, fit the elbow and 5/8” hose connector.

Cool water from calorifier tank 3. Remove bung from underside of heat exchanger tank with 8mm hex key. 4. Fit 3/8”BSP Male x Female elbow 5. Fit 3/8”BSP x 5/8 hose connector Note:

All fittings to be sealed with PTFE tape or pipe sealant to prevent water leaks when engine is at operating temperature and pressure.

Part Numbers: 212-99233

212-99237

212-00904 212-04356 210-07357 212-06565 COMPLETE KIT: AK/HE/CAL/003 Prices and specifications are subject to amendment without notice. Information given is subject to our current conditions of tender and sale. In all cases please quote Beta Marine WOC ‘K’ number and Engine Type. Beta Marine will not be held responsible for incorrect supply without this information.

Beta Marine Limited Davy Way, Waterwells, Quedgeley, Gloucester, GL2 2AD, U.K. Tel: +44 (0) 1452 723492 Fax: +44 (0) 1452 883742 www.betamarine.co.uk sales@betamarine.co.uk

Cleaning the heat exchanger tube stack &replacing wasting zinc anode on 2011 Mini, Super5 & Super3 Series engines 1. The wasting zinc anode should be replaced every year. This can be more frequent depending on the environment the vessel is in. The anode is attached to the bolt inserted in the rear end cap of the heat exchanger. See fig. 1. 2. Using a 9/16” spanner, unscrew the bolt and replace the complete unit with a new one. 3. Check for leaks. 4. It is possible for fine sea weed and other debris to get past the inlet filter and into the tube stack. This requires removal of the tube stack for cleaning. 5. Drain off coolant into a bucket. 6. Unscrew the 6 end cap retaining bolts using a 5mm Hex Key (three each end of the tube stack). Remove the 'O' rings and slide out the tube stack. Clean tube stack and end caps. 7. Re-assemble using new 'O' rings, Beta Marine part number 212-07273. Do not over tighten end cap bolts Fig 1 Wasting anode and make sure the tube stack is the right way round -see aligning marks Fig 2. This is to ensure sea water flows correctly through the tubestack and not straight out of the exhaust, allowing sea water to flow from the lower twenty tubes to the front endcap where it then returns through the upper twenty tubes, past the wasting anode and into the exhaust system. 8. Re-fill engine with water/anti-freeze solution and run engine up to temperature to check for leaks. Fig 2 Aligning marks

Part numbers: 2 OFF 212-07273 O RING HEAT EXCHANGER TUBESTACK 1 OFF 209-61840 ZINC WASTING ANODE 6 OFF 217-00190Z M6 x 16mm SOCKET CAP SCREW Prices and specifications are subject to amendment without notice. Information given is subject to our current conditions of tender and sale. In all cases please quote Beta Marine WOC ‘K’ number and Engine Type. Beta Marine will not be held responsible for incorrect supply without this information.

Installation Kits

Ref. No. 010 020 030 040 050 060

010

020

030

040

050

060

070

080

090

110

120

Part No. AK/SML/HE/6e/S301 AK/SML/HE/6b/001 AK/SML/HE/6c/001 212-00466 AK/SML/6g/001 AK/SML/6k/001 AK/SML/6k/001 AK/SML/6l/H01

070 AK/SML/6l/001 AK/6H/HE/001 080 AK/6H/KC/001 090 100 110

AK/MID/3h/001 AK/SML/5a/002 212-96070/01

120

200-96160

100

Part Name WATER INLET KIT SUPER3 -BALL VALVE FROM JAN11 1" ID 2" WATER COOLED EXHAUST KIT 2" PLASTIC WATERLOCK (& 4 OFF HOSE CLIPS) ANTI-SYPHON WITH VENT FLEXIBLE FUEL PIPES 24" OAL ISO7840 FUEL DELIVERY KIT FUEL LEAK OFF KIT FUEL / WATER SEPARATOR HEAT EXCHANGER COOLED (8mm HOSE TAILS) FUEL / WATER SEPARATOR KEEL COOLED (8mm COMPRESSION) ELECTRIC FUEL LIFT PUMP (HEAT EXCHANGER COOLED 8mm HOSE TAILS) ELECTRIC FUEL LIFT PUMP (KEEL COOLED 8mm COMPRESSION) S3 REMOTE OIL FILTER BULKHEAD MOUNTED SINGLE LEVER CONTROL SINGLE LEVER CONTROL CABLE 3m BATTERY LEADS 1m, 25mm 1 BLACK & 1 RED -UP TO Beta60 ONLY

Qty 1 1 1 1 1 1 1

Remarks

NOT SHOWN 1

1 1 1 1

NOT SHOWN

Short Voyage Spares Kits

Ref. No.

Part No. AK/S3H4/18/MVE02

010 AK/S3H4/18/6KMVE02

Part Name SPARES KIT Beta43 & 60 H/E 65/70AMP -FROM MAY14 SPARES KIT Beta43 & 60 H/E 65/70/120AMP 6K DRIVE -FROM MAY14

Qty

Remarks NOT SHOWN

1 NOT SHOWN

PLEASE NOTE: THERE ARE TOO MANY COMBINATIONS OF SPARES KIT TO LIST, PLEASE ADVISE BETA MARINE OF YOUR ENGINE’S WOC (K) NUMBER OR SERIAL NUMBER AND WE SHALL ADVISE. PRICE OF THIS KIT WILL BE THE SAME AS ILLUSTRATED ABOVE.

Beta Marine Limited, Davy Way, Waterwells, Quedgeley, Gloucester, GL2 2AD. UK. Tel: +44 (0)1452 723492 Fax: +44 (0)1452 883742 Email: sales@betamarine.co.uk Website: www.betamarine.co.uk

Ref: IPL-221-10913 REV-05 - 1116