Trailer maintenance tips

Heavy haul trailers trek thousands of miles during their service lives and encounter many challenges from rocks and ruts to bumps and jolts; no trailer gets out unscathed. To get the most from trailers, here are some tips to prevent costly damage and keep your trailers in top shape.

1 Start with the purchase Minimizing heavy haul trailer maintenance starts long before the load hits the road. To ensure long term durability, choose units with high strength steel, such as 30-cm deep I-beams with a minimum yield strength of 100,000 psi.

High-quality finishes are also important. A trailer with premium primer and topcoat finishes will look great for years to come and will, as a result, have a higher resale value.

2 Load capacity To minimize wear on components such as brakes and tires, and to ensure safety, follow the right loading capacity of the trailer. This means getting a true idea of load constraints as well as weight, speed, and safety ratings. Manufacturers are great resources for providing a clear picture of each trailer’s true capacity. 3 Pre-trip inspection Before taking off with each load, inspect your heavy haul trailer and check that brakes and tires are in good condition. Also ensure tires are properly inflated to the right psi and confirm hydraulic hoses are free from cracks or damage. If you are operating a detachable or rear load model, be sure to properly maintain hydraulic pressure even on self-contained and wet lines. 4 Hydraulic cylinders Hydraulic cylinders should be fully retracted when not in use to minimize the stainless-steel rams’ exposure to the elements and maximize their longevity.

5 Lubricate Keep wheel-ends lubricated to minimize wear and prevent gear oil leakage. Well-lubricated wheel ends also ensure proper and safe operation. Brakes, cams

and slack adjusters need to be lubricated, as well. In addition, use dielectric grease on lighting connections, electrical components, lights and lighting harnesses to reduce corrosion. Always refer to the manufacturer’s recommendations and grease guidelines.

A quick walk around the trailer to inspect the frame, chains, and straps for damage is a good idea as well. Trailers see a lot of use and abuse, particularly in harsher weather conditions, so repairs or replacements could be needed sooner rather than later.

6 Tires Travelling with underinflated tires is one of the biggest culprits of premature wear, so keeping them properly inflated will allow them to last longer and boost fuel efficiency. Regularly check tire pressure and keep them properly inflated, either manually or with an automatic tire inflation system.

In addition to keeping tires inflated, it is just as important to replace them when they become worn to avoid a blowout and downtime. Always select the right size and rating to ensure optimal performance and keep tire pressure equalized for the greatest longevity.

7 Preventative maintenance program Developing a preventative maintenance program that aligns with an owner’s business needs will minimize breakdowns and optimize longevity of trailers as well as their components. It also will enhance safety. Trailer fleet owners should match their equipment needs to a maintenance schedule. For example, will the trailer need to be on the road all the time or will it sit idle for longer periods of time?

One of the best ways to see a direct reflection of the success of your maintenance program is through the Commercial Vehicle Safety Alliance’s inspection program. The non-profit organization scores commercial motor vehicles based on inspection procedures and CVSA criteria – and the lower the number, the better.

Trailers see a lot of use and abuse, particularly in harsher weather conditions, so repairs or replacements could be needed sooner rather than later.

8 Keep a record Proper record keeping is also important, so you know when preventative maintenance is needed and what has already been done. This helps your operation optimize efficiency and prevent any small issues from becoming larger headaches down the road. Putting proper procedures in place will keep appropriate personnel accountable for performing the maintenance when needed. 9 Training for mechanics Trailer owners should ensure anyone involved with any aspect of the trailer’s use has proper training, not only to prevent damage to the trailer, but also for their safety and the safety of others. In addition, ensure mechanics are welltrained on maintaining heavy haul trailers and that they follow manufacturers’ guidelines.

10 Communication Drivers and maintenance technicians should have open lines of communication in regard to trailer issues or required maintenance. This will ensure the right kind of maintenance is performed and that it’s done in a timely manner.

From fleets of five trailers to 50, proper selection, maintenance and preventative programs are equally important in ensuring the greatest longevity, safety and performance of each unit. CMJ

Troy Geisler is the vice-president of sales and marketing for Talbert Manufacturing and Lloyd Hair is the director of maintenance for Keen Transport.

WEEKLY REPORT

SUBSCRIBE FOR FREE

Email Newsletter for Mining Professionals

Join the thousands of mining professionals already receiving The Northern Miner’s FREE Weekly Report

NORTHERNMINER.COM / WEEKLY-REPORT