BIOLEVEL Abutments and Prosthetics
Sulkus height (mm)
Designation 1
2
4
Functional structure of the BIOLEVEL System
Abutment height (mm) 6
6
7
9
11
1. Healing abutment 2. Universal abutment, tapered 3. Universal abutment, angulated 4. Anathomic abutment, straight 5. Anathomic abutment, angulated 6. O-ring ball abutment 7. Paracentric abutment
ø 3,25
ø 3,75
ø 4,25
ø 5,25
8. Tube abutment 9. Titanium base 10. Direct Impression coping for close tray 11. Direct Impression coping for open tray 12. Implant Analog
Contact:
Bionika Medline Ltd. H-3516 Miskolc, Tégla str. 29. Phone: +36 20 9583 629 Fax: +36 46 652 407 info@bionika.hu www.bionika.hu
ø 6,25
Development: Owners of BIONIKA attach great importance on continuous product and technological development. Our products are developed by close co-operation of doctors and engineers, fact by which we can assure the highest quality available worldwide and practical efficiency at the same time. Quality: The design, manufacturing and quality management performed according to the adopted measures of the European Union assure the quality expected by our Customers. The BIONIKA Medline Ltd. works according to the EN ISO 9001 and ISO 13485 quality management systems. Our products are marked with the CE sign. Warranty: Following the implantation process, we provide warranty for replacing the unit within one year counting from the date of purchase, regardless of the causal relevance. BIONIKA assumes the risk of ossification process. Otherwise we provide a 5-year long-term warranty for our products.
Spiral micro-grooved corticalis surface: Holding on to the corticalis, the multi-start micro-grooved spiral surface functions as a significant load-bearing element both in the primary and later stage. The form of the micro-thread is upwards narrowing while the core of the thread follows the 2.5-degree tapered biological tracing. Due to the geometry of the cycloid round thread, this selflocking thread structure facilitates deducting the dynamic effects, provides the micro move-free conditions and assures the fast incorporation. Anatomical root-shape, high pitch selfcompressing thread: Follows the anatomical shape of the tooth root. It has a bone-compacting effect due to the implant’s tapered thread and its high pitch, large thread depth, selflocking and self-cutting formation. This enables the implant to be promptly loadable if needed, as a result of the high primary stability.
Rounded implant end: It facilitates the smaller direction changes during the implant insertion.
10
ø 3,25 ø 3,75 ø 4,25 ø 5,25 ø 6,25
ø 3,25
ø 3,75 6 mm
Clinical and technological experiences: Continuous process, combination and utilisation of the clinical and technological experiences in development contribute to our success, with a feedback throughout the manufacturing base. The most adequate solutions and constructions satisfying the customer demands are born here and they are continuously developed.
Platform switching: The fitting diameter of the upper structure is smaller than the outside part of the implant connecting to the bone. The bone can slide on to the top flange of the implant.
8
16 mm 13 mm 11,5 mm 10 mm 8 mm
Cortical Level: On the long term, operation experiences prove that the chances for the implant to stay in place are significantly improved if the top flange of the implant is set to corticalis level or below that by 0.5-1mm.
6
16 mm 13 mm 11,5 mm 10 mm 8 mm
Connection: Cone & Hex The complex cone & hexagonal prism geometry provides the perfect fit, well proved in the engineering practice. We use a 90-degree taper angle that provides a micro move-free load transmission and provides good conditions for accurate open or closed tray method. The forces are superimposed deep into the implant.
Implanting length (mm)
Diameter (mm)
16 mm 13 mm 11,5 mm 10 mm 8 mm
Through the dentists’ and implantologists’ experience a demand has emerged for a wide compatibility between the dental implants. As a response, the BIOLEVEL implant family has been developed, which presented a significant progress within the area of biological and practical requirement systems regarding both the implant inserting instruments and abutments. Compatibility: Semados, Zimmer, MIS, Bioactive, Alpha Bio, AB, SGS
BIOLEVEL Dimensions
ø 4,25 13 mm 11,5 mm 10 mm 8 mm 6 mm
BIONIKA Medline Medical Engineering Ltd. was formed in 1989. We have more than 20 years of experience in developing, manufacturing and sales of surgical instruments and implants. BIONIKA is present in the technical fields of odontology, oral surgery, traumatology, orthopaedics and rehabilitation as a company dealing with research and development as well as manufacturing and distribution. According to our aim and conception we attach great significance to the word „BIONIKA” that represents a scientific way of thinking along the common borderlines of biology, technology and electronics, which combines these three fields during our work of research and development.
BIOLEVEL System
ø 5,25 13 mm 11,5 mm 10 mm 8 mm 6 mm
Company
ø 6,25
11,5
13
16