CorticaL ECO System Characterictics System structures
CorticaL ECO Implants Field of Application Parameters
CorticaL ECO Abutments and Prosthetics Characterictics Parameters
Surgical Instruments Surgical Instruments Parameters
The Company BIONIKA Medline Medical Engineering Ltd. was formed in 1989. We have more than 20 years of experience in developing, manufacturing and sales of surgical instruments and implants. BIONIKA is present in the technical fields of odontology, oral surgery, traumatology, orthopaedics and rehabilitation as a company dealing with research and development as well as manufacturing and distribution. According to our aim and conception we attach great significance to the word „BIONIKA� that represents a scientific way of thinking along the common borderlines of biology, technology and electronics, which combines these three fields during our work of research and development.
Clinical and technological experiences: Continuous process, combination and utilisation of the clinical and technological experiences in development contribute to our success, with a feedback throughout the manufacturing base. The most adequate solutions and constructions satisfying the customer demands are born here and they are continuously developed. Development: Owners of BIONIKA attach great importance on continuous product and technological development. Our products are developed by close co-operation of doctors and engineers, fact by which we can assure the highest quality available worldwide and practical efficiency at the same time. Quality: The design, manufacturing and quality management performed according to the adopted measures of the European Union assure the quality expected by our Customers. The BIONIKA Medline Ltd. works according to the EN ISO 9001 and ISO 13485 quality management systems. Our products are marked with the CE sign. Warranty: Following the implantation process, we provide warranty for replacing the unit within one year counting from the date of purchase, regardless of the causal relevance. BIONIKA assumes the risk of ossification process. Otherwise we provide a 5-year long-term warranty for our products.
CorticaL ECO System
Connection: cone & hex & cylindrical This complex cone & hexagonal prism & cylinder geometry has been proved in the engineering practice and ensures the perfect fitting. We are using a 30-degree cone angle that provides a micro move-free load transmission and assures good conditions for accurate open or closed tray method. It superimposes the forces deep into the implant’s inside.
Cortical Level: On the long term, operation experiences prove that the chances for the implant to stay in place are significantly improved if the top flange of the implant is set to corticalis level or below that by 0.5-1mm.
Platform switching: The fitting diameter of the upper structure is smaller than the outside part of the implant connecting to the bone. The bone may slide on to the top flange of the implant and this way the soft tissue closes upon the ingoing aperture of the bone nest and the implant’s connecting surface, covering and sealing it like a sealing ring.
Spiral, micro-grooved corticalis surface: Holding on to the corticalis, the multi-start micro-grooved spiral surface functions as a significant load-bearing element both in the primary and later stage. Due to the cycloid knuckle thread geometry, this selflocking thread structure facilitates deducting the dynamic effects and facilitates the micro move-free conditions and assures a fast incorporation.
Anatomical tooth root-shape, high pitch selfcompressing spongiosa thread: The CorticaL follows the anatomical shape of the root. Due to the tapered thread and the high pitch, large thread depth, self-locking and self-cutting formation of the implant, it has a bone-compacting effect. As a result of the high primary stability, this enables the implant to be promptly loadable if needed.
CorticaL ECO System structures
ø 3,5
ø 4,0
ø 4,5
ø 5,0
ø 6,0
Field of Application of CorticaL ECO
One tooth missing - to replace one tooth there is no need to abrade two healthy teeth for applying bridgework, but following the insertion of an implant we fasten a crown to it in accordance with the traditional method.
Tooth / teeth missing from row ends - due to the lack of the back bearing tooth, in this case we are not able to make a fixed replacement (bridgework). Inserting at least two implants, the (fixed) bridgework replacement can be completed.
Lack of all teeth - the patient has no teeth at all and only full replacement may be considered. In such case we have two possibilities:
I. We insert 2-4 implants that will fasten the removable denture. This will result in a significant improvement regarding the patient’s quality of life as their denture will be considerably stable and they will be able to use it very easily either when chewing or talking.
II. Inserting more, 8-10 implants, a full fixed replacement can be made (round bridge), which is nearly equivalent to the natural teeth, both functionally and aesthetically.
CorticaL ECO parameters D
Diameter (D)
ø 3,5
Length (L) L
7 mm
CLE 59.01.35.007
9 mm
CLE 59.01.35.009
11 mm
CLE 59.01.35.011
13 mm
CLE 59.01.35.013
15 mm
CLE 59.01.35.015
Diameter (D)
ø 4,0
D
Length (L) L
7 mm
CLE 59.01.40.007
9 mm
CLE 59.01.40.009
11 mm
CLE 59.01.40.011
13 mm
CLE 59.01.40.013
15 mm
CLE 59.01.40.015
Diameter (D)
ø 4,5
D
Length (L) L
7 mm
CLE 59.01.45.007
9 mm
CLE 59.01.45.009
11 mm
CLE 59.01.45.011
13 mm
CLE 59.01.45.013
15 mm
CLE 59.01.45.015
Diameter (D)
ø 5,0
D
Length (L) L
7 mm
CLE 59.01.50.007
9 mm
CLE 59.01.50.009
11 mm
CLE 59.01.50.011
13 mm
CLE 59.01.50.013
15 mm
CLE 59.01.50.015
Diameter (D)
ø 6,0
D
Length (L) L
7 mm
CLE 59.01.60.007
9 mm
CLE 59.01.60.009
11 mm
CLE 59.01.60.011
13 mm
CLE 59.01.60.013
15 mm
CLE 59.01.60.015
CorticaL ECO Abutments and Prosthetics
Regarding their upper structures and technical elements, the Bionika’s Cortical ECO implants form an up-to-date system that provides the most economical wide range practicability for both the implantologist and their patients. With the best price/value rate, it is a quite simple and reliable construction. It is an obvious possibility for both experienced and beginner implantologists as the implantation can be performed using the tool set of other widespread large systems, no new investment is needed. In case if some new tools are still needed, we complete your existing set on a very good price. The main element of the thrift is the multifunctional head, which is the holder of the implant within the package. In addition, it is suitable for inserting, turning in the implant, performing the sample taking and naturally for forming the implant head as well. The common units of the system are included in the chart. In function of the mentum bone structure, individual and customized solutions are also available for the Partners.
Sulkus height (mm) Designation 2 1.Healing abutment 2.Multifunkcional abutment for open tray 3.Implant Analog 4.Universal abutment, angulated 15° 5.Ball abutment (OT-CAP micro) 6.Paracentric abutment
4
6
Abutment height (mm) 11
Cover screw
Finger wrench
Healing abutment
Finger wrench
Abutment screw
Multifunkcional abutment
Ratchet wrench 20 Ncm
Universal abutment, angulated
Paracentric screw
Plastic paracentric abutment
Ratchet wrench 15 Ncm
Paracentric cup
Ball abutment (OT-CAP micro)
Metal housing (OT-CAP micro)
Nylon liner (OT-CAP micro)
Ratchet wrench 20 Ncm
CorticaL ECO Abutment parameters
Cover screw
L
Height (L) 1,8 mm
Healing abutment L
Multifunkcional abutment
CLE 59.02.18.003
Sulkus height (L) 2 mm
CLE 59.03.18.002
4 mm
CLE 59.03.18.004
6 mm
CLE 59.03.18.006
Abutment height (L) L
11 mm
Implant Analog
CLE 59.04.05.011
Height (L) 12 mm
CLE 59.05.35.012
L
Universal abutment, angulated 15째
Abutment height (L) L
Abutment screw L
11 mm
CLE 59.06.15.011
Height (L) 7/9 mm
CLE 59.09.18.709
Ball abutment (OT-CAP micro)
Sulkus height (L) L
Nylon liner (OT-CAP micro)
L
Metal housing (OT-CAP micro)
L
CLE 59.07.18.002
4 mm
CLE 59.07.18.004
6 mm
CLE 59.07.18.006
Height (L) 2,5 mm
CLE 59.07.18.000
Height (L) 3 mm
Paracentric cup L
Plastic paracentric abutment
2 mm
CLE 59.07.18.001
Sulkus height (L) 2 mm
CLE 59.08.41.002
4 mm
CLE 59.08.41.004
6 mm
CLE 59.08.41.006
Height (L) L
7 mm
Paracentric screw
CLE 59.08.41.107
Height (L) L
9/13 mm
CLE 59.09.18.913
11/15 mm
CLE 59.09.18.115
13/17 mm
CLE 59.09.18.117
1
2
3
4
Surgical Instruments
5
9 10
11 12
14 13
8
7
6
15 17
23 19
24
16
29
20
18
21
25
32
26
Designation
22
30
28
27
31 Size
1
Round bur
CL 59.51.00.000
2
Spear-head drill (initial bur)
3
Pilot drill
D 2,0mm
CL 59.53.00.000
4
Pilot drill
D 2,5mm
CL 59.54.00.000
5
Depth gauge with distanse indicator
CL 59.55.00.000
6
Neck dilating drills (5db)
CL 59.56.00.000
7
Special drills (20db)
CL 59.57.00.000
8
Universal spiral drills (5db)
CL 59.58.00.000
9
Screwdriver for rachet, short
Lt 1,3mm
CL 59.59.00.000
10
Screwdriver for rachet, long
Lt 1,3mm
CL 59.60.00.000
11
Screwdriver for rachet
CL 59.52.00.000
CL 59.61.00.000
12
Screwdriver for rachet
13
Screwdriver for handpiece, short
Lt 1,3mm
CL 59.62.00.000 CL 59.63.00.000
14
Screwdriver for handpiece, long
Lt 1,3mm
CL 59.64.00.000
15
Implantdriver for handpiece, short
6Lt 2,2mm
CL 59.65.00.000
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
Designation
Size
16
Implantdriver for handpiece, long
6Lt 2,2mm
CL 59.66.00.000
17
Implantdriver for rachet, short
6Lt 2,2mm
CL 59.67.00.000
18
Implantdriver for rachet, long
6Lt 2,2mm
CL 59.68.00.000
19
OT-CAP driver for handpiece, short
CL 59.69.00.000
20
OT-CAP driver for handpiece, long
CL 59.70.00.000
21
OT-CAP driver for rachet, short
CL 59.71.00.000
22
OT-CAP driver for rachet, long
CL 59.72.00.000
23
Puncher for handpiece, long
D 3,5mm
CL 59.73.00.000
24
Puncher for handpiece, short
D 3,5mm
CL 59.74.00.000
25
Puncher for handpiece, long
D 4,0mm
CL 59.75.00.000
26
Puncher for handpiece, short
D 4,0mm
CL 59.76.00.000
27
Driver adapter for handpiece
4Lt3,9mm
CL 59.77.00.000
28
Puncher for rachet
D 4,0mm
CL 59.78.00.000
29
Alignment pin, slim
D 2,5-3,0mm
CL 59.79.00.000
30
Alignment pin, wide
D 3,0-4,0mm
CL 59.80.00.000
31
Finger wrench
32
Ratchet wrench
CL 59.81.00.000 90mm
CL 59.82.00.000
Package
Notes